Académique Documents
Professionnel Documents
Culture Documents
Bumper Sub
Manual D445
Contents
Lubricated Fishing Bumper Sub
Overview................................................................................ 2
Use ........................................................................................ 2
Construction .......................................................................... 2
Operation............................................................................... 3
Fishing Operations............................................................. 3
Drilling Operations ............................................................. 3
Applying a Downward Blow ............................................... 3
Applying an Upward Blow .................................................. 3
Assembly ............................................................................... 3
Filling the Jar...................................................................... 4
Seal Assembly Installation............................................... 5 7
Maintenance .......................................................................... 8
Complete Disassembly ...................................................... 8
Illustration .............................................................................. 9
Complete Assemblies and Parts Lists ......................... 10 15
Strength Data ...................................................................... 16
Recommended Tightening Torques..................................... 17
Jar Service Kit ............................................................. 18 19
LEGAL NOTICE
All references to Bowen part numbers in this literature are
used to identify interchangeable tools and parts. Reference to
such tools and parts does not imply that Logan Oil Tools is a
licensee or is in any way affiliated with National Oilwell Varco.
Logan Oil Tools does not sell, or offer to sell, National Oilwell
Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
OVERVIEW
The primary purpose of the Lubricated
Fishing Bumper Sub is to enable the
operator to release the fishing tool in
the event it becomes impossible to pull
the fish. It can provide the necessary
vertical impact in either direction
upward or downward and deliver the
required torque to release the tool from
the fish whether it is rotating or not.
There are several secondary uses for
the Lubricated Fishing Bumper Sub: to
bump down, to bump a solid downward
blow, and to jar up in the hole.
The Logan Lubricated Fishing Bumper
Sub is a dependable accessory that
is suitable for all fishing operations
especially harsh, downhole applications and deep workover operations.
It can also meet the demands of tools
that require sharp, sustained bumping action to actuate or release them.
Depending on the size of the tool, the
vertical stroke length ranges from 10 to
18 inches.
USE
The Logan Lubricated Fishing Bumper
Sub is especially suited for deep fishing
operations, and light to medium drilling
applications. Equally effective in either
direction, the tool is also ideal for coring
operations.
The Logan Lubricated Fishing Bumper
Sub delivers the sharp downward blow
and torque required to disengage a fish
when it is impossible to pull the fish.
The tool can repeatedly bump in either
direction or alternately bump up and
down to dislodge drill pipe, reamers,
drill collars, bits, or other tools that have
become stuck.
Knocker
The knocker strikes a heavy impact
blow to the lower end of the mandrel
body. The knocker material is specially
selected for use in impact loading. It is
closely fitted to restrict high frequency
lateral vibration, or chatter, that can
shorten the life of the tool.
Washpipe
The upper end of the washpipe is
designed with stabilizing features similar to the knocker. The lower end is
hard-faced and ground to a high polish
to reduce frictional wear in the sealed
upper end of the washpipe body.
Fishing Operations
A Lubricated Fishing Bumper Sub
should be included in the fishing string
whenever a releasing type fishing tool
will be used. If it becomes impossible
to pull the fish, the operator will have
means available to release the fishing
tool. The Lubricated Fishing Bumper
Sub will deliver a sharp blow and transmit the torque required to disengage
and release a fishing tool from the fish.
Washpipe Body
The lowermost part of the tool is the
washpipe body. Its primary purposes
are to close the lower end of the middle body (oil chamber) and to transmit
torque.
Critical Seals
Tandem seal points located at the upper
end of the mandrel and the lower end
of the washpipe are fitted with seal ring
assemblies consisting of O-ring seals,
seal protector rings, and seal nonextrusion rings. As hydraulic pressure is
applied (in either direction), these seal/
ring assemblies reduce normal diametric clearance at the seal points to nearly
zero. The non-extrusion rings prevent
the O-rings from being pushed out or
rolled out of position.
OPERATION
The Logan Lubricated Fishing Bumper
Sub is typically run directly above the
spear, overshot, screw-in sub, or safety
joint. The tool is designed to allow a
vertical stroke upward or downward
whether it is rotating or not, and is
always available to the operator. The
Lubricated Fishing Bumper Sub will
transmit full torque at all times during
rotation and bumping operations.
Drilling Operations
The Lubricated Fishing Bumper Sub
is generally installed in the drill string
immediately above the drill collars.
(CONTINUED)
(CONTINUED)
Properly seat the seals with the aid of the setting tool, tapping around the entire top edge
of the setting tool to seat the rings if necessary.
(Setting tools are not included in the Jar Service
Kit and must be ordered separately. Refer to
Parts Lists on pages 10 15 for part numbers.)
Complete Disassembly
Place a bucket or pan under the tool
to catch oil that will drain out of the
washpipe body, middle body, and mandrel body as each connection is broken.
Referring to the illustration on page 9,
proceed with disassembly as follows:
CAUTION: Use only enough gripping action in the vise to break the
connections. Avoid making heavy
tool marks.
Non-Extrusion Ring
Seal Protector Ring
Mandrel Seal
Seal Protector Ring
Non-Extrusion Ring
Mandrel Body Fill Plug
and Seal
Mandrel Body
Middle Body
Knocker
Washpipe Seal
Middle Body Seal (Small)
Middle Body Fill Plug
and Seal
Non-Extrusion Ring
Seal Protector Ring
Washpipe Seal
Seal Protector Ring
Non-Extrusion Ring
Middle Body Seal (Large)
Washpipe
Washpipe Body
1-13/16
WILSON FJ
1-13/16
3/8
10
607-181
54781
1-1/4
API REG
2-1/4
3/8
10
607-225
41490
2-3/8
API REG
3-1/8
1
15-1/2
607-312
43501
2-7/8
API REG
3-3/4
1-1/4
15-1/2
607-375
43509
2-7/8
AM PAC
3-1/8
1-1/2
15-1/2
607-313
2-3/8
API IF
3-3/4
1-1/2
15-1/2
607-376
43470
2-3/8
EUE
3-3/4
1-7/8
15-1/2
607-377
43521
AJ1000
36811
AJ2000
36742
AJ3000
36744
AJ4000
54783
AJ5000
53721
L365-19
365-19
4
L375-19
375-19
4
AG10000
617
AG10000
617
AJ2001
41491
AJ3001
41492
AJ4001
41493
AJ5001
41520
AJ6001
41495
L365-24
365-24
8
L375-24
375-24
8
AG10002
329
AG10000
617
AJ7001
41845
AJ2002
43502
AJ3002
43503
AJ4002
43504
AJ5002
43506
AJ6002
43505
L365-32
365-32
8
L375-32
375-32
8
AG10002
329
AG10004
10641
AJ7002
43508
AJ2003
43510
AJ3003
43511
AJ4003
43512
AJ5003
43514
AJ6003
43513
L365-35
365-35
8
L375-35
375-35
8
AG10002
329
AG10000
617
AJ7003
43516
AJ20025
AJ30025
AJ40025
AJ50025
AJ60025
AG10000
617
AG10000
617
AJ70025
AJ2004
43471
AJ3004
43472
AJ4004
43473
AJ5004
43475
AJ6004
43474
L365-36
365-36
8
L375-36
375-36
8
AG10002
329
AG10000
617
AJ7004
39845
AJ2005
43522
AJ3005
43523
AJ4005
43524
AJ5005
43526
AJ6005
43525
L365-37.5
365-37.5
8
L375-37.5
375-37.5
8
AG10002
329
AG10000
617
AJ7005
43528
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
(4) Name and number of any desired spares
Recommended Spare Parts:
(1) 1 Service Kit
(2) 6 Seal Packing Sets
(3) 4 Middle Body Fill Plugs
(4) 4 Mandrel Body Fill Plugs
(5) 16 Main Mandrel Non-Extrusion Rings
(6) 16 Main Mandrel Seal Protector Rings
(7) 1 Seal Ring Setting Tool
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
1-13/16
WILSON FJ
1-13/16
3/8
10
607-181
54781
1-1/4
API REG
2-1/4
3/8
10
607-225
41490
2-3/8
API REG
3-1/8
1
15-1/2
607-312
43501
2-7/8
API REG
3-3/4
1-1/4
15-1/2
607-375
43509
2-7/8
AM PAC
3-1/8
1-1/2
15-1/2
607-313
2-3/8
API IF
3-3/4
1-1/2
15-1/2
607-376
43470
2-3/8
EUE
3-3/4
1-7/8
15-1/2
607-377
43521
26000-055
55403
AG1000-19
22709-19
28000-013
54784
568-211
568211
4
568-029
568029
2
568-027
568027
2
568-005
568005
568-005
568005
26000-055
55403
AG1000-24
22709-24
28000-014
41846
568-219
568219
4
568-224
568224
2
568-222
568222
2
568-210
568210
568-005
568005
568-006
568006
26000-055
55403
AG1000-32
22709-32
28000-015
43519
568-329
568329
4
568-231
568231
2
568-229
568229
2
568-220
568220
568-006
568006
26000-055
55403
AG1000-35
22709-35
28000-016
43517
568-332
568332
4
568-235
568235
2
568-233
568233
2
568-222
568222
568-005
568005
568-006
568006
26000-055
55403
28000-026
BD201-3
4
568-146
568-133
568-005
568005
568-005
568005
26000-055
55403
AG1000-36
22709-36
28000-017
39720
568-333
568333
4
568-235
568235
2
568-233
568233
2
568-223
568223
568-005
568005
568-006
568006
26000-055
55403
AG1000-37.5
22709-37.5
28000-018
43529
568-334
568334
4
568-236
568236
2
568-233
568233
2
568-229
568229
568-005
568005
568-006
568006
Logan Oil Tools reserves the right to change or discontinue designs without notice.
(1) Middle Body Seal on the 3-1/8 OD x 1-1/2 ID tool.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
(4) Name and number of any desired spares
Recommended Spare Parts:
(1) 1 Service Kit
(2) 6 Seal Packing Sets
(3) 4 Middle Body Fill Plugs
(4) 4 Mandrel Body Fill Plugs
(5) 16 Main Mandrel Non-Extrusion Rings
(6) 16 Main Mandrel Seal Protector Rings
(7) 1 Seal Ring Setting Tool
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
2-7/8
API IF
4-1/4
1-15/16
15-1/2
607-425
43531
2-7/8
EUE
4-1/2
2-3/8
15-1/2
607-450
42700
3-1/2 API
IF or FH
4-3/4
2
15-1/2
607-475
39727
3-1/2
API IF
4-3/4
2-1/4
15-1/2
607-476
4-1/2
API FH
6
2-13/16
18
607-600
39732
4-1/2 API
IF or FH
6-1/4
3-1/8
18
607-625
39737
5-1/2
API REG
6-3/4
2-3/4
18
607-675
39778
AJ2006
43532
AJ3006
43533
AJ4006
43534
AJ5006
43536
AJ6006
43535
L365-40
365-40
8
L375-40
375-40
8
AG10002
329
AG10000
617
AJ7006
43538
AJ2007
42701
AJ3007
42702
AJ4007
42703
AJ5007
42705
AJ6007
42704
L365-43
365-43
8
L375-43
375-43
8
AG10002
329
AG10000
617
AJ7007
42708
AJ2008
39861
AJ3008
33156
AJ4008
39728
AJ5008
39860
AJ6008
39729
L365-42
365-42
8
L375-42
375-42
8
AG10002
329
AG10000
617
AJ7008
39863
AJ2008
39861
AJ3008
33156
AJ40085
AJ50085
AJ60085
L365-42
365-42
8
L375-42
375-42
8
AG10002
329
AG10000
617
AJ7008
39863
AJ2009
30541
AJ3009
30542
AJ4009
39733
AJ5009
30545
AJ6009
39734
L365-50.25
365-50.25
8
L375-50.25
375-50.25
8
AG10002
329
AG10000
617
AJ7009
30546
AJ2010
34966
AJ3010
34967
AJ4010
39738
AJ5010
34970
AJ6010
39739
L365-53
365-53
8
L375-53
375-53
8
AG10002
329
AG10000
617
AJ7010
34972
AJ2011
33244
AJ3011
33245
AJ4011
39779
AJ5011
33248
AJ6011
39780
L365-54
365-54
8
L375-54
375-54
8
AG10002
329
AG10000
617
AJ7011
33250
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
(4) Name and number of any desired spares
Recommended Spare Parts:
(1) 1 Service Kit
(2) 6 Seal Packing Sets
(3) 4 Middle Body Fill Plugs
(4) 4 Mandrel Body Fill Plugs
(5) 16 Main Mandrel Non-Extrusion Rings
(6) 16 Main Mandrel Seal Protector Rings
(7) 1 Seal Ring Setting Tool
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
2-7/8
API IF
4-1/4
1-15/16
15-1/2
607-425
43531
2-7/8
EUE
4-1/2
2-3/8
15-1/2
607-450
42700
3-1/2 API
IF OR FH
4-3/4
2
15-1/2
607-475
39727
3-1/2
API IF
4-3/4
2-1/4
15-1/2
607-476
4-1/2
API FH
6
2-13/16
18
607-600
39732
4-1/2 API
IF OR FH
6-1/4
3-1/8
18
607-625
39737
5-1/2
API REG
6-3/4
2-3/4
18
607-675
39778
26000-055
55403
AG1000-40
22709-40
28000-019
43539
568-337
568337
4
568-239
568239
2
568-237
568237
2
568-227
568227
568-005
568005
568-006
568006
26000-055
55403
AG1000-43
22709-43
28000-020
42709
568-340
568340
4
568-242
568242
2
568-239
568239
2
568-231
568231
568-005
568005
568-006
568006
26000-055
55403
AG1000-42
22709-42
28000-021
39730
568-339
568339
4
568-242
568242
2
568-239
568239
2
568-229
568229
568-005
568005
568-006
568006
26000-055
55403
AG1000-42
22709-42
28000-021
568-339
568339
4
568-242
568242
2
568-239
568239
2
568-036
568-005
568005
568-006
568006
26000-055
55403
AJ8000
10572
28000-022
39735
568-347
568347
4
568-250
568250
2
568-247
568247
2
568-236
568236
568-005
568005
568-006
568006
26000-055
55403
AG1000-53
22709-53
28000-023
39740
568-426
568426
4
568-253
568253
2
568-251
568251
2
568-239
568239
568-005
568005
568-006
568006
26000-055
55403
AG1000-54
22709-54
28000-024
39781
568-427
568427
4
568-256
568256
2
568-254
568254
2
568-238
568238
568-005
568005
568-006
568006
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
(4) Name and number of any desired spares
Recommended Spare Parts:
(1) 1 Service Kit
(2) 6 Seal Packing Sets
(3) 4 Middle Body Fill Plugs
(4) 4 Mandrel Body Fill Plugs
(5) 16 Main Mandrel Non-Extrusion Rings
(6) 16 Main Mandrel Seal Protector Rings
(7) 1 Seal Ring Setting Tool
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
6-5/8
API REG
7-3/4
3-1/2
18
607-775
39752
AJ2012
34992
AJ3012
34993
AJ4012
39753
AJ5012
34996
AJ6012
39754
L365-61
365-61
8
LL375-61
375-61
8
AG10002
329
AG10000
617
AJ7012
34998
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
(4) Name and number of any desired spares
Recommended Spare Parts:
(1) 1 Service Kit
(2) 6 Seal Packing Sets
(3) 4 Middle Body Fill Plugs
(4) 4 Mandrel Body Fill Plugs
(5) 16 Main Mandrel Non-Extrusion Rings
(6) 16 Main Mandrel Seal Protector Rings
(7) 1 Seal Ring Setting Tool
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
JAR LUBE
6-5/8
API REG
7-3/4
3-1/2
18
607-775
39752
26000-055
55403
AG1000-61
22709-61
28000-025
39755
568-434
568434
4
568-261
568261
2
568-260
568260
2
568-246
568246
568-005
568005
568-006
568006
49842-A
49842-A
1 Gallon
49842-B
49842-B
5 Gallons
49842-C
49842-C
20 Gallons
49842-D
49842-D
55 Gallons
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
(4) Name and number of any desired spares
Recommended Spare Parts:
(1) 1 Service Kit
(2) 6 Seal Packing Sets
(3) 4 Middle Body Fill Plugs
(4) 4 Mandrel Body Fill Plugs
(5) 16 Main Mandrel Non-Extrusion Rings
(6) 16 Main Mandrel Seal Protector Rings
(7) 1 Seal Ring Setting Tool
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
STRENGTH DATA
CONNECTION
OUTSIDE DIAMETER
INSIDE DIAMETER
STROKE LENGTH
COMPLETE ASSEMBLY Logan Part No.
Bowen No.
1-13/16
WILSON FJ
1-13/16
3/8
10
607-181
54781
1-1/4
API REG
2-1/4
3/8
10
607-225
41490
2-3/8
API REG
3-1/8
1
15-1/2
607-312
43501
2-7/8
API REG
3-3/4
1-1/4
15-1/2
607-375
43509
2-7/8
AM PAC
3-1/8
1-1/2
15-1/2
607-313
2-3/8
API IF
3-3/4
1-1/2
15-1/2
607-376
43470
2-3/8
EUE
3-3/4
1-7/8
15-1/2
607-377
43521
75,400
480
240
116,415
1,740
870
239,070
3,400
1,700
363,780
7,100
3,550
217,000
4,800
2,400
300,750
7,100
3,550
291,735
4,920
2,460
CONNECTION
OUTSIDE DIAMETER
INSIDE DIAMETER
STROKE LENGTH
COMPLETE ASSEMBLY Logan Part No.
Bowen No.
2-7/8
API IF
4-1/4
1-15/16
15-1/2
607-425
43531
2-7/8
EUE
4-1/2
2-3/8
15-1/2
607-450
42700
3-1/2 API
IF or FH
4-3/4
2
15-1/2
607-475
39727
3-1/2
API IF
4-3/4
2-1/4
15-1/2
607-476
4-1/2 API
FH
6
2-13/16
18
607-600
39732
4-1/2 API
IF or FH
6-1/4
3-1/8
18
607-625
39737
5-1/2
API REG
6-3/4
2-3/4
18
607-675
39778
397,650
9,260
4,630
388,650
7,100
3,550
484,650
11,030
5,518
433,000
15,000
7,500
622,295
23,000
11,500
777,150
32,600
16,300
1,130,400
43,200
21,600
CONNECTION
OUTSIDE DIAMETER
INSIDE DIAMETER
STROKE LENGTH
COMPLETE ASSEMBLY Logan Part No.
Bowen No.
6-5/8
API REG
7-3/4
3-1/2
18
607-775
39752
1,276,950
62,400
31,200
The tensile strengths listed above are calculated theoretical yield strengths and are considered accurate to 20%.
Operating torques are set at 50% of the calculated theoretical yield torque and are the maximum recommended operating torques.
These figures do not constitute a guarantee, actual or implied. They are meant to serve as a guide only, and an appropriate
safety allowance must be made in use.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts
does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to
sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
16 Logan Lubricated Fishing Bumper Sub
Knocker to Mandrel
(internal connection)
Mandrel Body
Mandrel
Mandrel Body
Mandrel to Washpipe
(internal connection)
Mandrel to Washpipe
(internal connection)
Washpipe Body
Washpipe Body
Middle Body
Middle Body
MAXIMUM RECOMMENDED TIGHTENING TORQUES (FT-LBS)
COMPLETE ASSEMBLY
Logan No.
607-181
607-225
607-312
Bowen No.TIGHTENING
54781
41490
43501
MAXIMUM RECOMMENDED
TORQUES
(FT-LBS)
MANDREL TO MANDREL BODY
COMPLETE ASSEMBLY Logan No.
MANDREL BODY TO MIDDLE BODY
Bowen No.
KNOCKER TO MANDREL
MANDREL TO MANDREL BODY
MANDREL TO WASHPIPE
MANDREL BODY TO MIDDLE BODY
MIDDLE BODY TO WASHPIPE BODY
KNOCKER TO MANDREL
MANDREL TO WASHPIPE
MIDDLE BODY TO WASHPIPE BODY
240
607-181
370
54781
240
370
370
370
607-225
870
41490
90
140
870
870
90
140
870
607-312
1,700
43501
430
660
1,700
1,700
430
660
1,700
607-375
43509
607-375
3,550
43509
580
500
3,550
3,550
580
500
3,550
607-313
607-313
1,250
300
500
1,250
1,000
300
500
1,000
607-376
43470
607-376
3,550
43470
410
490
3,550
3,550
410
490
3,550
607-377
43521
607-377
2,460
43521
330
1,220
2,460
2,460
330
1,220
2,460
607-476
152719
607-476
7,500
152719
1,000
1,500
7,500
7,500
1,000
1,500
7,500
607-600
39732
607-600
11,500
39732
2,270
3,800
11,500
13,500
2,270
3,800
13,500
607-625
39737
607-625
16,300
39737
3,120
9,750
16,300
16,300
3,120
9,750
16,300
607-675
39778
607-675
21,600
39778
3,000
13,300
21,600
22,600
3,000
13,300
22,600
Logan No.
607-425
607-450
607-475
Bowen No.TIGHTENING
43531
42700
39727
MAXIMUM RECOMMENDED
TORQUES
(FT-LBS)
MANDREL TO MANDREL BODY
COMPLETE ASSEMBLY Logan No.
MANDREL BODY TO MIDDLE BODY
Bowen No.
KNOCKER TO MANDREL
MANDREL TO MANDREL BODY
MANDREL TO WASHPIPE
MANDREL BODY TO MIDDLE BODY
MIDDLE BODY TO WASHPIPE BODY
KNOCKER TO MANDREL
MANDREL TO WASHPIPE
MIDDLE BODY TO WASHPIPE BODY
607-425
4,630
43531
670
730
4,630
4,630
670
730
4,630
607-450
3,550
42700
370
1,450
3,550
3,550
370
1,450
3,550
607-475
7,500
39727
1,100
1,690
7,500
7,500
1,100
1,690
7,500
Logan No.
607-775
Bowen No.
39752
MAXIMUM RECOMMENDED TIGHTENING
TORQUES (FT-LBS)
MANDREL TO MANDREL BODY
MANDREL TO WASHPIPE
21,000
MANDREL BODY TO MIDDLE BODY
31,200
MIDDLE BODY TO WASHPIPE BODY
31,200
KNOCKER TO MANDREL
7,690
MANDREL TO WASHPIPE
21,000
The makeup
torques
listed aboveBODY
are the maximum
recommended makeup torques for each connection.
MIDDLE
BODY
TO WASHPIPE
31,200
Values are set at 50% of the calculated theoretical yield torque. Torques this high are not required for all fishing jobs.
Lower values will result in less thread wear.
The makeup torques listed above are the maximum recommended makeup torques for each connection.
The tightening
torque
were calculated
assuming
or similarthis
zinc-based
grease
was applied
to all threads
Values
are set at
50% values
of the calculated
theoretical
yield Itcolube
torque. Torques
high are not
required
for all fishing
jobs. and shoulders.
Lower values will result in less thread wear.
LEGAL NOTICE
Thereferences
tightening torque
values
were
calculated
assuming
Itcolube
or similar
zinc-based
grease was applied
to all
threads
and shoulders.
All
to Bowen
part
numbers
in this
literature
are used
to identify
interchangeable
tools and
parts.
Reference
to such tools and parts
does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to
sell, National Oilwell Varco (Bowen) products.
Logan Lubricated Fishing Bumper Sub 17
Bowen is a registered trademark of National Oilwell Varco.
J1045-001
3/8" Fill Plug
Adapter
J1046-001
7/16" Fill Plug
Adapter
J1086
1/4" Female Couplers
J1224-001
5/8" Fill Plug
Adapter
J1374
Hex Bushing
J1373
Box Coupler
568010-100
O-Ring
568005-100
O-Rings
J1376
Hose Fitting
J1085
1/4" Male Couplers
J1078
1/4" x 1" Pipe Nipple
J1080
Line Filter
J1077
Fill Plug Wrench
J1075
Torx Head
Fill Plug Wrench
J1073
Installation Tool
J1074
O-Ring Installation Tool
AG1000-xx *
Mandrel Setting Tool
Setting Tools are not included in the Service Kit and must be
ordered separately for each tool size at additional cost.
* Refer to Parts Lists on pages 9 and 11 for complete part numbers.
JAR
JAR SERVICE
SERVICE KIT
KIT
JAR SERVICE KIT
Pump Hose
Pump Hose
Pump Hose
J1072
J1072
6 Ft. Exhaust Hose
6 Ft. Exhaust Hose
J1072
6 Ft. Exhaust Hose
COMPLETE ASSEMBLY
COMPLETE ASSEMBLY
Consists of:
Consists of:
SEAL
PROTECTOR
RING
COMPLETE
ASSEMBLY
SEAL
PROTECTOR
RING
INSTALLATION
TOOL
Consists
of:
INSTALLATION TOOL
O-RING
SEAL
PROTECTOR RING
O-RING
INSTALLATION TOOL
TOOL
INSTALLATION
INSTALLATION TOOL
FILL
PLUG
WRENCH
O-RING
FILL PLUG WRENCH
T30 TORX HEADTOOL
INSTALLATION
T30 TORX HEAD
FILL
FILL PLUG
PLUG WRENCH
WRENCH
FILL
PLUG
WRENCH
ALLEN
HEAD
T30
TORX
HEAD
ALLEN HEAD
1/4"
1" PIPE
NIPPLE
FILL x
WRENCH
1/4"
xPLUG
1" PIPE
NIPPLE
ALLEN HEAD
LINE
FILTER
1/4"
1" PIPE NIPPLE
LINExFILTER
J1069
J1069
Volume Pump
Volume Pump
J1069
Volume Pump
J1070
J1070
Metal Box
Metal Box
J1070
Metal Box
Bowen No.
625
HOSE FITTING
Bowen No.
Logan Part
Part No.
No.
J1074
6
FT.
EXHAUST
HOSE
Logan
Part
No.
J1072
Logan
J1073
1/4"
19
NPT
PIN
Logan
Part
No.
J1376
Logan Part No.
J1074
6 FT. EXHAUST HOSE
Logan Part No.
J1072
Bowen No.
No.
626
Bowen
33435
Bowen
625
HOSE FITTING
Bowen No.
No.
Bowen No.
626
Bowen
No.
33435
Logan
Part
No.
J1075
PUMP
HOSE
Logan
Part
No.
Logan
J1074
6 FT. EXHAUST
HOSE
Logan Part
Part No.
No.
J1072
Logan Part
Part No.
No.
J1075
PUMP
HOSE
Logan
Bowen No.
No.
359T
Bowen
No.
2581
Bowen
626
Bowen
No.
33435
Bowen No.
359T
Bowen No.
2581
Logan
J1077
VOLUME
PUMP
Logan
J1069
Logan Part
Part No.
No.
J1075
PUMP HOSE
Logan Part
Part No.
No.
Logan
Part
No.
J1077
VOLUME
PUMP
Logan
Part
No.
J1069
Bowen
No.
620A
Bowen
No.
2580
Bowen
No.
359T
Bowen
No.
2581
Bowen No.
620A
Bowen No.
2580
Logan
J1078
METAL
BOX
Logan
Part
No.
J1070
Logan Part
Part No.
No.
J1077
VOLUME
PUMP
Logan
Part
No.
J1069
Logan
Part
No.
J1078
METAL BOX
Logan Part No.
J1070
Bowen
No.
36953
Bowen
No.
1995
Bowen No.
No.
620A
Bowen No.
No.
2580
Bowen
36953
Bowen
1995
Logan Part
Part No.
No.
J1080
5/8"
FILL
PLUG
ADAPTER
Logan
Part
No.
J1224-001
Logan
J1078
METAL
BOX
Logan
Part
No.
J1070
Logan Part No.
J1080
5/8" FILL PLUG ADAPTER
Logan Part No.
J1224-001
Bowen
56565
Bowen
Bowen No.
No.
36953
Bowen No.
No.
1995
Bowen
No.
56565
Bowen
No.
1/4"
MALE
COUPLER
Logan Part
Part No.
No.
J1085
7/16"
20
NF
Logan
Part
No.
J1046-001
LINE
FILTER
Logan
J1080
5/8" FILL
PLUG ADAPTER
Logan Part
Part No.
No.
J1224-001
1/4" MALE COUPLER
Logan Part No.
J1085
7/16"
20 NF
Logan
J1046-001
Bowen
656
FILL PLUG ADAPTER
Bowen
No.
Bowen No.
No.
56565
Bowen
No.
Bowen
No.
656
FILL PLUG ADAPTER
Bowen No.
1/4"
COUPLER
Logan
J1086
3/8"
Logan
J1045-001
1/4" FEMALE
MALE COUPLER
Logan Part
Part No.
No.
J1085
7/16"24
20NF
NF
Logan Part
Part No.
No.
J1046-001
1/4"
FEMALE
COUPLER
Logan
Part
No.
J1086
3/8"
24
NF
Logan
Part
No.
J1045-001
Bowen No.
No.
655
FILL
PLUG
ADAPTER
Bowen
No.
Bowen
656
FILL
PLUG
ADAPTER
Bowen
No.
Bowen No.
655
FILL PLUG ADAPTER
Bowen No.
3/8"
x 1/4"
GALVANIZED Logan
J1373
O-RING
Logan
568010-100
1/4" BOX
FEMALE
COUPLER
Logan Part
Part No.
No.
J1086
3/8" 24 NF
Logan Part
Part No.
No.
J1045-001
3/8"
BOX
x 1/4"
GALVANIZED Logan
Part
No.
J1373
O-RING
Logan
Part
No.
568010-100
BOX COULPLER
Bowen
No.
Bowen
No.
568010
Bowen No.
No.
655
FILL PLUG ADAPTER
Bowen No.
No.
BOX COULPLER
Bowen
Bowen
568010
1/8"
BOX
x
1/4"
Logan Part
Part No.
No.
J1374
O-RING
70
DURO
NITRILE
Logan
Part
No.
568005-100
3/8"
BOX
x
1/4"
GALVANIZED
Logan
J1373
O-RING
Logan
Part
No.
568010-100
1/8" BOX x 1/4"
Logan Part No.
J1374
O-RING 70 DURO NITRILE Logan Part No.
568005-100
PIN
BUSHING
Bowen
Bowen
568005
BOXHEX
COULPLER
Bowen No.
No.
Bowen No.
No.
568010
PIN
HEX
BUSHING
Bowen
No.
Bowen
No.
568005
1/8" BOX x 1/4"
Logan Part No.
J1374
O-RING 70 DURO NITRILE Logan Part No.
568005-100
PIN HEXSetting
BUSHING
BoweninNo.
568005
Mandrel
Tools are not included
the Service Kit andmust be
When ordering, please specify:Bowen No.
Mandrel Setting Tools are not included in the Service Kit and must be
When ordering, please specify:
ordered separately for each tool size at additional cost. See pages 9
(1)
Name
and
number
of
assembly
or
part
ordered separately for each tool size at additional cost. See pages 9
(1) Name and number of assembly or part
and 11 for part numbers.
and
11 for
part numbers.
Mandrel
Setting
Tools are not included in the Service Kit and must be
When ordering, please specify:
ordered separately
(1) Name and number of assembly or part
LEGAL
NOTICE for each tool size at additional cost. See pages 9
andreferences
11 for part numbers.
Logan
Fishing
Bumper
19
All
to Bowen part numbers in this literature are used to identify interchangeable tools
andLubricated
parts. Reference
to such
tools Sub
and parts
Logan
Lubricated
Fishing
Bumper
Sub
19
does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to
LoganVarco.
Lubricated Fishing Bumper Sub 19
sell, National Oilwell Varco (Bowen) products. Bowen is a registered trademark of National Oilwell
Manual D445 Logan Lubricated Fishing Bumper Sub Page 19
Notes