Académique Documents
Professionnel Documents
Culture Documents
Zeven, Germany
Headquarters
Bondoufle, France
Wittenburg, Germany
(LISEGA facility for fasteners)
Hans-Herlof Hardtke
Rolf Mnnich
CONTENT
LICAD
EASYSTEEL
TECHNICAL SPECIFICATIONS
PRODUCT GROUP 1
Constant Hangers, Constant Supports
PRODUCT GROUP 2
Spring Hangers, Spring Supports
PRODUCT GROUP 3
Shock Absorbers, Energy Absorbers, Rigid Struts
PRODUCT GROUP 4
Pipe Clamps, Clamp Bases, Pipe Connecting Parts
PRODUCT GROUP 5
Pipe Bearing and Saddle Components
PRODUCT GROUP 6
Threaded Connecting Elements
PRODUCT GROUP 7
Structural Attachment Elements
PRODUCT GROUP 8
Design Development Tools
SERVICE
Extra Services
11:11 Uhr
Seite 2
LISEGA - 2011
US
01.08.2013
US
Umschlag US 2011.qxp
TECHNICAL SPECIFICATIONS
PRODUCT
GROUP
TECHNICAL
SPECIFICATIONS
CONTENTS
1.
1.1
1.2
2.
2.1
2.2
2.3
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
4.
5.
6.
7.
8.
8.1
8.2
8.3
8.4
8.5
9.
9.1
9.2
10.
10.1
10.2
11.
11.1
11.2
11.3
11.4
11.5
12.
13.
14.
PAGE
TECHNICAL
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
0.0
TECHNICAL
SPECIFICATIONS
The products outlined in
this catalog - STANDARD
SUPPORTS 2010 - are fully
in line with the latest developments in support technology and satisfy general
requirements for plant
installation at the highest
level. For the general
design of LISEGA standard
supports, uniform criteria
are applied. They are
described in the following
TECHNICAL SPECIFICATIONS
and are binding for the
contents of this catalog.
Componentrelated features
are outlined in the corresponding sections of the
product groups and in the
type data sheets
Unless expressly agreed
otherwise, the stipulations
in the catalog STANDARD
SUPPORTS 2010 apply to
all our shipments.
1. STANDARD SUPPORTS
1.1 Requirements
For the support of industrial piping systems,
the use of standard supports is regarded as
well proven, up-to-date technology.
Only a correspondingly high level of standardization in support components can adequately
satisfy the justifiable demand for products
that are technically top-class and economically attractive at the same time. The complex
requirements for modern pipe supports are:
reliable functioning
maintenance-free operation
low unit prices
simple planning with DP systems
instant availability
economical installation strategy
easy to install designs
supplementary service benefits
1.2 Definition
Standard supports must fulfill the following
criteria:
component shapes are uniform and
designed for optimum exploitation
of material
units are compatible regarding connecting
dimensions and loading capacity
units are cataloged and clearly identifiable
by a designation system
components are manufactured in
series production
components comply with the relevant
standards and international regulations
functional capacity, suitability and
durability of the units is well proven
components are certified and
approved for use
The relevant codes for pipe supports in
German plant construction (power plants),
VGB guideline R 510 L, require the preferential use of standard supports and define the
criteria as follows:
0.1
Standard supports are pipe support components, the construction of which, in form
and dimensions as well as in the design
data relating to loading capacity, is certificated
and cataloged, and which are manufactured
according to firmly established, reproducible
procedures, e.g. series production.
2. LISEGA STANDARD SUPPORTS
2.1 Scope
At LISEGA, standard supports form the basis
of a comprehensive performance package.
A complete program from more than 8000
standardized components thereby covers all
operational loads, temperatures and travel
ranges normally met in piping systems in
industrial plant construction:
1200F operating temperature for
pipe clamps and clamp bases
90 kips nominal load for all mainly
statically determined components
224 kips nominal load for rigid struts
and standard shock absorbers
1124 kips design load for large bore
shock absorbers
36 inch travel range for constant hangers
16 inch travel range for spring hangers
2.2 Design features
Specially developed components are available
for the various support functions. In the
design and construction of the units, fundamental design principles have been taken
into consideration:
0
In addition, LISEGA hangers feature only one
upper attachment point. As a result, and due
also to the compact and symmetrical design
shape, the load transfer free of moments to
the connecting elements is ensured and
simple installation enabled. The operational
position of the moving parts (hangers,
supports and shock absorbers) can be read
directly off a travel scale. Load adjustment
of the constant hangers and supports can be
modified at all times, also in the installed
condition under load. Hangers and supports
can be blocked in any travel position.
2.3 Principle of the optimum design type
For the design of support components, optimum coverage of the specific support function is the decisive factor. For each function
only one component is therefore required,
namely, the optimum one for the purpose.
The project engineer is spared costly selection
from a series of alternative solutions. This
not only facilitates application but also
increases safety. Above and beyond this, it
is a prerequisite for the rational application
of standardized construction on the principle
of the modular system.
Theres only ONE best solution!
3. LISEGA MODULAR SYSTEM
3.1 Fundamentals
The cost of pipe supports is a major element
in the total cost of a piping system.
The cost of the supports is the accumulated
total cost arising from:
The LISEGA modular system is specially targeted towards this efficiency. The standardization of components forms the foundation and
is the precondition for rational series production, dependable quality, systematic warehousing and computer assisted application. With
the LICAD design system and corresponding
logistics, significant rationalization effects
can be achieved in engineering, design and
installation.
3.2 Scope
The standardization at LISEGA extends beyond the components to their systematic interaction. To this end, load and travel distribution as well as function and connections
are meaningfully coordinated.
In this way the LISEGA standard support
program has been developed as a functional
modular system with logical linking. The individual units form modules therein and are
compatible regarding loads and connections.
This enables the formation of meaningful combinations to produce support configurations
fulfilling all requirements. The large selection
of components makes adaptation possible to
widely differing support and application
situations.
Product groups
3.3 Product groups
The standardized units are divided into 7
product groups according to their basic modes
of function (see diagram, page 0.3, and table,
Standardized Components, page 0.4).
3.4 Load groups
To guarantee compatible loads in unit combinations, the load spectrum is split into
fixed load groups.
Within a load group (nominal load), all components feature uniform load limits and stress
safety characteristics. The connection shapes
of the units (threads - either metric or UNC
according to market area - or pin diameters)
are uniform within a group and thus compatible. Components of different product groups
can therefore be connected only within a uniform load group to safe load chains and the
faulty combination of different load groups
is precluded. As all units in a load group are
designed uniformly regarding strength, the
stresses on a complete chain of components
+ load groups
+ travel ranges
+ connection compatibility
= Modular System
===================
Modular System
+ CAD design
+ DP logitic systems
0.2
constant
hangers
dynamically
loaded components
spring
hangers
pipe surrounding
components
structural
attachment elements
threaded connecting
components
design development
tools
0.3
LOAD GROUPS
NOMINAL LOADS (lbs)
CONNECTING THREADS
CONNECTING BOLTS
0
Standardized components
Product
Group
group designation
Constant
hangers
Spring
hangers
Dynamically
loaded
components
Pipe
surrounding
components
Pipe
bearings
and saddle
components
Threaded
connecting
elements
Structural
attachment
elements
Unit
type
11
12-14
16
16
17
71
79
20
21
22
25
26
27
28
29
72
79
30
31
32
33
35
36-37
39
40
41
42-44
45-48
49
51
52
53
54
54
54
55
56
57
58
58
60
61
62
63
64
65
66
67
73
74
75
76
77
78
79
Unit
designation
constant hanger
multi-cell constant hanger
constant support
angulating const. support
servo hanger
support
const. hanger, trapeze
articulated spring support
spring hanger
heavy duty spring hanger
spring hanger, seated
heavy d. spr. hang., seated
sway brace
heavy duty spring support
variable spring support
base plate
spring hanger trapeze
shock absorber
large bore shock absorber
energy absorber
installation extension
weld-on bracket
dynamic pipe clamp
rigid strut
U-bolt
weld-on lug
horizontal clamp
riser clamp
clamp base, lift-off restraints
cylinder roller bearing
double taper roller bearing
double cylinder roller bear.
weld-on pipe saddle
pipe saddle w. pipe clamp
support tray
lift-off restraint
insulated pipe bearing
weld-on pipe shoe
stanchion
elbow pad
eye nut
clevis
turnbuckle
hexagon nut
rod coupling
tie rod L/R
tie rod
threaded rod / stud bolt
weld-on clevis
weld-on pl. w. spher. wash.
weld-on eye nut
beam adapter
connecting plate
beam clamp
trapeze
Nominal Connection
load [lbs]
thread
3/
70
8
3/
141
8
1/
281
2
1/
562
2
5/
1125
8
3/
2250
4
4495
1
8990
11/4
13490
11/2
17985
13/4
22480
2
35970
21/4
44960
21/2
53955
23/4
67400
3
90000
31/4
Wrench
size
11/
16
11/
16
7/
8
7/
8
11/16
11/4
15/8
2
23/8
23/4
31/8
31/2
37/8
41/4
45/8
5
Pin
3/
8
3/
8
1/
2
1/
2
5/
8
13/
16
1
15/16
19/16
13/4
2
23/8
23/4
23/4
31/8
31/2
Load
group
1
2
3
4
5
6
7
8
9
10
20
30
40
50
Nominal
load [lbs]
675
900
1800
4000
10350
22450
44900
78600
123500
224000
448000
670000
900000
1124000
Pin
0.39
0.39
0.47
0.59
0.78
1.18
1.96
2.36
2.75
3.93
4.72
5.51
6.29
7.08
For Product Group 4 (pipe connections) a limited area of overlapping in the load groups
is foreseen, due to the temperature-related,
variable spectrum of loading capacities. Data
on the permissible loads relating to the respective operating temperature are set out for
pipe connection components in the individual type data sheets.
For Product Group 5 see 3.5.5, page 0.5.
0.4
Load
group
C
D
1
2
3
4
5
6
7
8
9
10
20
30
40
50
Normal operation
Nominal
Level A/B
Upset
176F
302F
load
70
157
179
157
141
494
562
382
281
831
944
629
562
1350
1505
990
1125 1910
2270
2540
2250 3150
4700
5240
4495 6070
6745
7645
8990 9665 12590
11240
13490 14160 18660
16635
17985 19110 25620
22925
22480 25180 33935
30340
35970 40015 49895
44725
44960 48330 66750
59780
53955 60700 76410
68545
67400 71940 85400
76400
90000 90000 110100
98900
Emergency
Level C
176F
302F
224
247
651
741
1124
1258
1800
2025
3010
3370
6250
6970
9215
10340
14835
16635
21800
24275
30340
33715
39555
44050
59555
66300
79780
88700
91245
101580
113500 101200
146100 131500
Faulted condition
Level D
176F
302F
292
314
854
966
1438
1618
2700
2990
4495
4990
8320
9215
13710 12365
21575 19330
31465 28320
43825 39330
57310 51690
85625 77085
115065 103605
131470 118210
146100 131500
188800 169700
3.5.4 Max. permissible loads (lbs) for dynamically determined components, Product Group 3
Hereunder all dynamic loads
are to be included that can possibly result from plant operation,
including pressure shock forces
from valve operation, and perhaps
operating basis earthquakes (OBE).
0.5
Load
group
1
2
3
4
5
6
7
8
9
10
20
30
40
50
Normal (Fn)/Upset
Level A/B
176F
302F
675
650
900
875
1800
1680
4000
3710
10350
9900
22450
21200
44900
39300
78600
76100
123500
120000
224000
210000
448000
426000
670000
640000
900000
854000
1124000
1067000
Emergency
Level C
176F
302F
900
850
1190
1150
2380
2180
5380
4950
13700
13150
31000
28000
60000
53500
106000
95000
165000
160000
300000
277000
597000
566000
898000
853000
1195000
1135000
1495000
1420000
Faulted condition
Level D
176F
302F
1160
1120
1550
1500
3070
2800
6960
6400
17300
16700
40400
36400
75500
67500
147000
132000
210000
205000
391000
362000
773000
734000
1159000
1101000
1545000
1465000
1930000
1830000
0
3.6. Travel ranges
Complete integrated
application of 8000
components possible
through clearcut type
designation key!
0
0
0
0
0
0
Constant hanger
Travel range
Designation No.
-6
inch [150mm]
1. .2 . .
- 12
1. .3 . .
inch [300mm]
1. .4 . .
- 18
inch [450mm]
1. .5 . .
- 24
inch [600mm]
1. .6 . .
- 291/2 inch [750mm]
1. .7 . .
- 351/2 inch [900mm]
0
0
0
0
0
Spring hanger
Travel range
Designation No.
-2
inch [50mm]
2. .1 . .
-4
2. .2 . .
inch [100mm]
2. .3 . .
-8
inch [200mm]
2. .4 . .
- 12
inch [300mm]
2. .5 . .
- 16
inch [400mm]
1 1 5 3 2 5
1985
standard
travel range 3/0-12 inch
load group 5/FN 4495 lbs
single cell
constant hanger
3.7.2 Example of clamp base, type 49
4 9 5 1 8 5
high design, welded
13CrMo4-5, Nuclear spec.
5 7/8
11 3/4
15 3/4
19 3/4
23 5/8
29 1/2
4
8
Shock absorber
Type
Stroke
inch [150mm]
30
inch [300mm]
30
inch [400mm]
30
inch [500mm]
30
inch [600mm]
30
inch [750mm]
30
inch [100mm]
30/31
inch [200mm]
30/31
3 9 6 2 5 4
standard spec.
length 981/4 inch
Design. No.
. . .2 . .
. . .3 . .
. . .4 . .
. . .5 . .
. . .6 . .
. . .7 . .
. . .8 . .
. . .9 . .
0.6
Digit
1
Digit
2
Digit
3
Digit
4
Digit
5
Digit
6
Digit
1
Digit
2
Digit
3
Digit
4
Product
group
Model
Load group
Travel
range
2=6inch
3=12inch
4=18inch
5=24inch
6=30inch
7=36inch
Field of
application
2=standard
6=nuclear
application
STANDARD
1=std. design
2=angulated
design
NUCLEAR
APPLICATION
5=std. design
6=ang. design
3=standard
7=nuclear
application
Prod.
series
5=1985
9=1999
Product
group
Model
Load group
Travel
range
1= constant C=3/8UNC-70lbs
hanger
D=3/8UNC-141lbs
1=1/2UNC-281lbs
2=1/2UNC-562lbs
3=5/8UNC-1125lbs
4=3/4UNC-2250lbs
5=1UNC-4495lbs
6=11/4UNC-8990lbs
7=11/2UNC-13490lbs
8=13/4UNC-17985lbs
9=2UNC-22480lbs
2= CH
8=21/4UNC-35970lbs
2-cell coupl. 9=21/2UNC-44960lbs
3= CH
8=23/4UNC-53955lbs
3-cell coupl. 9=3UNC-67400lbs
4= CH
8=3UNC-71940lbs
4-cell coupl. 9=31/4UNC-90000lbs
7= servo
5=1UNC-4495lbs
2=6inch
hanger
6=11/4UNC-8990lbs 3=12inch
7=11/2UNC-13490lbs
8=13/4UNC-17985lbs
9=2UNC-22480lbs
6= constant
support/
angulating
constant
support
Digit
2
Digit
3
Product
group
Model
Load group
0= angul.
C=3/8UNC-56lbs
spring supp. D=3/8UNC-120lbs
0= extens. f. 1=1/2UNC-281lbs
type 20
2=1/2UNC-562lbs
1= spring h. 3=5/8UNC-1125lbs
suspended 4=3/4UNC-2250lbs
5= spring h. 5=1UNC-4495lbs
seated
6=11/4UNC-8990lbs
7= sway brace 7=11/2UNC-13490lbs
7= extens. f. 8=13/4UNC-17985lbs
type 27
9=2UNC-22480lbs
9= spring sup.
2= SH,
1=21/4UNC-35970lbs
suspended 2=21/2UNC-44960lbs
6= SH,
3=23/4UNC-53955lbs
seated
4=3UNC-67400lbs
8= spring sup. 5=31/4UNC-90000lbs
Digit
4
Digit
2
Digit
3
9= rigid
struts
2=standard
6=nuclear
application
Product
group
Model
Load group
3= 670000lbs
4= 900000lbs
5= 1124000lbs
STANDARD
1= up to 660F
2= up to 930F
3= up to 1040F
NUCLEAR
APPLICATION
2
3
4
5
6
7
8
9
0
=
900lbs
= 1800lbs
= 4000lbs
= 10350lbs
= 22450lbs
= 44900lbs
= 78600lbs
= 123500lbs
= 224000lbs
Digit
6
Prod.
series
4=1994
8=1978
9=1999
Digit
6
Prod.
series
2=2002
3=1993
6=1986
8=1988
at Type 32
6=1996
Digit
1
Digit
2
6= up to 660F
7= up to 930F
8= up to 1040F
Prod.
series
1=1991
3=1993
6=1986
9=1989
1-6=
U-bolts
1-9=
flat steel
strap
3-4=
standard
8-9=
nuclear
application
middle
installation
dimension
in inch/4
Product
group
Model
1= weld-on
lug
horiz. clamp
2=clevis clamp
2=2 bolt clamp
3=3 bolt clamp
4= with Ubolt or strap
riser clamps
5=formed
riser clamp
6=riser cl., lugs
8=riser clamp,
trunnions
9= clamp
bases
Digit
3+4
Digit
5
Field of
application
D9 = 141lbs 59 = 4495lbs 1= standard
29 = 562lbs 69 = 8990lbs
39 = 1125lbs 79 = 13490lbs
49 = 2250lbs
01 = 0.84
1= standard
24 = 9.63
02 = 1.06
26 = 10.50
03 = 1.33
27 = 10.75
04 = 1.67
32 = 12.75
05 = 1.90
36 = 14.00
06 = 2.37
STANDARD
37 = 14.50
07 = 2.87
1= up to 660F
41 = 16.00
08 = 3.00
2= up to 930F
42 = 16.50
09 = 3.50
3= up to 1040F
46 = 18.00
10 = 4.25
4= up to 1110F
51 = 20.00
11 = 4.50
5= up to 1200F
56 = 22.00
13 = 5.25
61 = 24.00
14 = 5.50
NUCLEAR
66 = 26.00
16 = 6.25
APPLICATION
71 = 28.00
17 = 6.63
6= up to 660F
76 = 30.00
19 = 7.63
7= up to 930F
81 = 32.00
22 = 8.63
8= up to 1040F
91 = 36.00
Pipe diameter in inch
0= U-bolts
0= 224000lbs
0.7
Digit
5
Travel
Field of
range
application
0= hydraulic 1= 675lbs 4= 4000lbs 2=57/8inch 1= standard
shock absor. 2= 900lbs 5=10350lbs 3=113/4inch 5= nuclear
stand. design 3= 1800lbs 6=22450lbs 4=153/4inch application
2= energy 7= 44900lbs
5=193/4inch
absorber
8= 78600lbs
8=4inch
3= extension 9= 123500lbs
9=8inch
1= hydraulic 9= 123500lbs
shock absor. 0= 224000lbs
large bore
2= 448000lbs
39=
49= 4000lbs 09= 224000lbs
59= 10350lbs 20= 448000lbs
69= 22450lbs
pipe diameter
in inch2.54 [mm/10]
Digit
6
Travel
Field of
range
application
1=2inch
1,2=standard
2=4inch
5,6=nuclear
3=8inch
application
4=12inch
5=16inch
9=extens.
f. type 20
&. type 27
Digit
4
Field of
application
675lbs 79= 44900lbs 1= standard
900lbs 89= 78600lbs 5= nuclear
1800lbs 99= 123500lbs application
7=dynamic
pipe clamp
with strap
5= weld-on 19=
29=
bracket
6= dynamic
pipe clamp
with U-bolt
Digit
5
8=4inch
9=8inch
00=Lift-off
9=Lift-off
restraints for restraints
clamp bases
2= carbon
steel
4= stainless
steel
0=Lift-off
restraints
Digit
6
Prod.
series
f. straight pipes,
max. insul. thickn.
1=3/8inch
2=4inch
for pipe elbows
R1.5OD
max. insul. thickn.
3,4=3/8inch
5,6=4inch
depends
on load
range and
design
1=low
2=medium
3=low,
welded
4=medium,
welded
5=high,
welded
8=standard
1-4=size
0
3.8.5 Roller bearings, cryogenic clamp bases
Digit
1
Digit
2
Digit
3+4
Digit
5
Digit
6
Digit
1
Digit
2
Digit
3
Digit
4
Digit
5
Digit
6
Product
group
Model
Load group
Pipe diameter
04= 900lbs
08= 1800lbs
12= 27000lbs
16= 3600lbs
35= 7870lbs
60= 13500lbs
Field of
application
1=standard
2=movable
laterally
Prod.series
9=1989
Product
group
Model
Load group
Length
Prod.series
3=1993
8=1978
9=1999
01 =
02 =
03 =
05 =
06 =
07 =
08 =
09 =
10 =
11 =
13 =
14 =
16 =
17 =
19 =
22 =
24 =
26 =
27 =
32 =
36 =
37 =
41 =
42 =
46 =
51 =
56 =
61 =
66 =
71 =
76 =
81 =
91 =
1=weldable
2=with pipe
clamp
3=support
plate
1=
12inch long
2,4,6=
20inch long
Field of
application
1=standard
6=nuclear
application
2=standard
6=nuclear
application
4=hot dip
galvanized
1=cylinder
roller bearings
2=double taper
roller bearings
3=double cylinder
roller bearings
5=lift-off restr.
f. roller bear.
4=pipe saddle/
support tray
6= preinsulated pipes
7= weld-on
pipe bases
8=
stanchions
8=elbow
pads
0.84
1.06
1.33
1.90
2.37
2.87
3.00
3.50
4.25
4.50
5.25
5.50
6.25
6.63
7.63
8.63
9.63
10.50
10.75
12.75
14.00
14.50
16.00
16.50
18.00
20.00
22.00
24.00
26.00
28.00
30.00
32.00
36.00
Insul. thickn.
0=1inch
1=11/2inch
2=2inch
3=3inch
4=4inch
5=5inch
6=6inch
7=7inch
8=8inch
9=10inch
9=cold block 1= Cold
Block
1=standard 1=from
T-sections
2=from
C-sections
1=
1,2= for
stanchions
streight
2=telescopic
pipes
stanchions
3,4= for
elbow
R OD
5,6= for
elbow
R1,5OD
3=standard 1=carbon steel
2=stainless steel
Digit
2
Digit
3+4
Digit
5
Digit
6
Product
group
Model
Load group
Field of
application
2=standard
6=nuclear
4=hot dip
galvanized
Prod.series
2=1982
5=1995
8=1978
9=1999
0=eye nut
1=clevis
2=turnbuckle
4=rod
coupling
D9 = 3/8UNC-141lbs
29 = 1/2UNC-562lbs
39 = 5/8UNC-1125lbs
49 = 3/4UNC-2250lbs
59 = 1UNC-4495lbs
69 = 11/4UNC-8990lbs
79 = 11/2UNC-13490lbs
89 = 13/4UNC-17985lbs
99 = 2UNC-22480lbs
10 = 21/4UNC-35970lbs
20 = 21/2UNC-44960lbs
30 = 23/4UNC-53955lbs
40 = 3UNC-67400lbs
50 = 31/4UNC-90000lbs
3=hexag.
nut
D=3/8UNC-141lbs
2=1/2UNC-562lbs
3=5/8UNC-1125lbs
5=tie rod
4=3/4UNC-2250lbs
left/right
5=1UNC-4495lbs
6=tie rod
6=11/4UNC-8990lbs
right/right
7=11/2UNC-13490lbs
7=stud bolt/ 8=13/4UNC-17985lbs
threaded rod 9=2UNC-22480lbs
length
not
standardized
9 (Model 3)
1=not standardized
2=24inch
3=48inch
4=72inch
5=96inch
6=120inch
7=144inch
10 = 21/4UNC-35970lbs
20 = 21/2UNC-44960lbs
30 = 23/4UNC-53955lbs
40 = 3UNC-67400lbs
50 = 31/4UNC-90000lbs
Digit
2
Digit
3
Digit
4
Digit
5
Digit
6
Product
group
Model
Load group
Function
Field of
application
STANDARD
6= bolted
7= loose
NUCLEAR
8= bolted
9= loose
Prod.series
5,9 =
bracket 1x
6=
bracket 2x
7=
bracket 3x
8=
bracket 4x
1=1991/
2001
2=1982
3=1993
4=1994
5=1985
6=1996
8=1978
9=1989
1= support C = 3/8UNC-70lbs
for constant D = 3/8UNC-141lbs
hanger
1 = 1/2UNC-281lbs
2 = 1/2UNC-562lbs
3 = 5/8UNC-1125lbs
4 = 3/4UNC-2250lbs
5 = 1UNC-4495lbs
6 = 11/4UNC-8990lbs
2=base plate f. 7 = 11/2UNC-13490lbs
spring hanger 8 = 13/4UNC-17985lbs
3=weld-on clevis 9 = 2UNC-22480lbs
4=weld-on plate
5=weld-on eye 10 = 21/4UNC-35970lbs
nut
20 = 21/2UNC-44960lbs
6=beam adapter 30 = 23/4UNC-53955lbs
and bolts
40 = 3UNC-67400lbs
8=beam clamp 50 = 31/4UNC-90000lbs
2...7=
travel
range of
constant
hanger
6-36inch
9=trapeze
0=PTFE slide
plate
2=2 connections
3=3 connections
1...3= travel
range of
spring hanger 2-8 inch
7=connecting plate
1, 2, 3, 9= 1=standard
depends
5=nuclear
on design application
2=const.hang. 4, 6 and 9=
trapeze
U-sections
1 and 2=
7=
spring hanger L-sections
trapeze
3=rigid trapeze
0.8
Worldwide coverage
of recognized codes
and standards!
Standardized selection
of high temperature
materials!
5. MATERIALS
Materials are exclusively used which correspond to ASTM material requirements and
DIN or DIN-EN norms.
USA
USA
USA
USA
Germany
Germany
Germany
Germany
Germany
UK
France
Japan
Japan
Material-No. EN 10027-2
S235JRG2
S235JRG2
S235JRG2
S355J2G3
S355J2G3
S355J2G3
P235T1
P235G11TH
16Mo 3
13CrMo 4-5
10CrMo 9-10
X10CrMoVNb9-1
X5CrNi 18-10
1.0038
1.0038
1.0038
1.0570
1.0570
1.0570
1.0254
1.0305
1.5415
1.7335
1.7380
1.4903
1.4301
42CrMoV 4
1.7225
X10CrMoVNb9-1
21 CrMoV 5-7
X22CrMoV12-1
24CrMo 5
1.4903
1.7709
1.4923
1.7258
Temperature of medium in F
660 840 930 985 1040 1110 1200
COMPONENTS
x
A 36
x
A 515 Gr. 60
x
A 675 Gr. 55
x
A 675 Gr. 70
x
A 299
x
A 516 Gr. 70
x
A 53 S Gr. A
x
A 53 S Gr. A
x
x
x
A 204
x
x
x
x
x
A 387 Gr. 12
x
x
x
x
x
x
A 387 Gr. 22
x
x
x
x
x
x
x
A 387 Gr. 91 Cl.II
x
x
x
x
A 312 TP 304
MEANS OF CONNECTION
x
A 193 B7
x
x
x
x
x
x
x
A 193 B8
x
x
x
x
x
x
x
A 182 F91
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
A 194 Gr. 2H
ASTM
0.9
differ in design. Due to additional qualityassuring measures and materials with special certification, separate manufacture is however necessary.
0
In the field of nuclear application, all materials are traceable right through to the finished
product via heat number restamping, and the
components themselves are marked according to ASME and KTA regulations. In the
type designation, the nuclear design is noted
in the 5th digit (for struts, the 6th digit). The
relevant component documentation relates
to this and to the fabrication order number.
In this catalog, the standard design, i.e. nonnuclear applications, provides the basis for
the type designations. As the given functional data and unit dimensions are the same for
nuclear applications, selection can also be
made here with the help of the catalog.
On planning or ordering, attention must however be paid to corresponding conformity of
the type designations. The table showing the
type designation system (3.8, page 0.7) can be
consulted in this respect.
7. WELDING
All welding is carried out as gas metal arc
welding - in special cases by stick welding.
LISEGA holds certifications according to:
ASME III Div I NCA NPT stamp
DIN EN 729-2 by the German TV
AD-HPO, production and testing of
pressure vessels, by the TV
DIN 18800 T7 Extended suitability
certification for steelwork and bridge
construction by the SLV, the training
and testing institute for welding
technology
LISEGA welding inspection personnel are qualified according to ASME III NCA 4000 NF,
DIN EN 719, AD HP3 and HP4. Nondestructive tests are carried out by testing
staff qualified acc. to ASME IX and DIN EN
473, level 2, and SNT-TC-1A, level II.
Supporting connections are produced corresponding to the material group by qualified
welders according to ASME IX or DIN EN
287, part 1. The welding procedure is qualified according to ASME IX and DIN EN 288.
8. SURFACE TREATMENT
8.1 Standard coating systems
The surfaces of LISEGA products are protected
as standard from corrosive influences by high
quality protection systems that are also suitable for external use in aggressive conditions
(coastal, industrial and chemical areas).
The following coating systems are applied
to the different products:
Separate manufacture
of products for nuclear
applications for the
traceability of
qualified materials!
0.10
Primer
Product
Type
11 - 17
Constant hangers, constant supports
71
Support for constant hangers
21, 25, 27
Spring hangers, sway braces
20, 29
Spring supports (incl. load group 9)
22, 26
Spring hangers
28
Spring supports (from load group 10)
35
Weld-on brackets
36, 37
Dynamic pipe clamps
39
Rigid struts
33
Shock absorber extensions
40
U-bolts
41, 42, 43, 44,
Weld-on lugs, pipe clamps
45, 46, 48, 49
Riser clamps, pipe clamp bases
51, 53
Cylinder roller bearings
52
Taper roller bearings
54
Pipe saddles/support tray
55
Lift-off restraints
56
Pipe clamp bases f. cryogenic appl.
57
Weld-on pipe shoe
58
Elbow pads
58
Stanchions
60, 61
Eye nuts, clevises
62, 64
Turnbuckles, rod couplings
63, 65
Hexagonal nuts, tie rods
66, 67
Threaded rods, stud bolts
72, 73
Base plates, weld-on clevises
74, 75
Spherical washers, weld-on eye nuts
76
Beam adapters
77
Connection plates
78
Beam clamps
79
Trapezes
0.11
Electrogalvanized
Standard
Hot dip
paint
galvanized
coating
acc. to 8.1.1 acc. to 8.1.2 acc. to 8.1.3 acc. to 8.1.4
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
0
8.3.3 Hot dip galvanizing
Hot dip galvanized surface, layer thickness
approx. 2.36 mil [60m], bolts approx.
1.57 mil [40m].
Type
11 - 17
Constant hangers, constant supports
71
Supports for constant hangers
21, 25, 27
Spring hangers, sway braces
20, 29
Spring supp. (incl. load group 9)
22, 26
Spring hangers
28
Spring supp. (from load group 10)
39
Rigid struts
33
Shock absorber extensions
60, 61,
Eye nuts, clevises
62, 64
Turnbuckles, rod couplings
63, 65,
Hexagon nuts, tie rods
66, 67
Threaded rods, stud bolts
79
Trapezes
x
x
x
x
x
x
x
x
x
x
x
x
x
For load chains consisting solely of pin connections, the minimum installation dimension
follows from the sum of all E dimensions.
0.12
travel s
FN
F min
F max
SN
nominal load
min. load (upwards)
max. load (downwards)
nominal travel (incl. reserve)
operating load
travel s
FN
SN
S
0.13
=
=
=
=
load F
load F
= nominal load
= nominal travel (incl. reserve)
= operating travel
0
10.2 Spring relaxation
Conventional helical coil springs under load,
depending on time and temperature factors,
lose part of their tension by relaxation (settling loss), a loss that is not inconsiderable.
If no appropriate measures are taken, for
constant and spring hangers this can in the
long run lead to a reduction in adjusted ultimate load of more than 10%.
In contrast to common practice, LISEGA only
uses springs that, through special treatment,
permit no settling loss of any significance.
In these springs the settling loss normally to
be expected is anticipated via the process of
hot setting from a longer coil length, producing corresponding prerelaxation.
Relaxation
The QMM applies in principle to both the conventional and nuclear fields. The extent of
monitoring of materials and tests, as well as
the documentation, can in each case be
exactly adapted to special requirements by the
use of extended QA levels. All international
requirements concerning nuclear applications
can be covered. Corresponding qualifications
are available and are regularly renewed.
11.3 International qualifications
Shear stress
Relaxation behavior of helical coil springs
Cold set helical coil springs
(values loosely based on DIN 2089)
LISEGA hot set helical coil springs
qualified by TV and VGB suitability tests
(independent German authorities)
Certification code
Certification No.
Certifying body
DIN/EN/ISO 9001
DIN/EN/ISO 9001
ASME-III NCA 4000/NF
(NPT-Stamp)
ASME-III NCA 3800/NF
Reg.Nr. 200550
1996/5030
N-2951
Stamping agreement
AD-Merkblatt HP 0; HP 3; HP 4
Welding certification according to EN 729-2
DIN 18800T7
Major qualification certificate
ASME III - NCA/NF; ASME IX
SKIFS 1994:1
ASME-III NF/NCA 3800;
10CFR50 App. B; 10CFR21;
N45.2; NQA1
0121WO29784
07-702-0194
07-703-0080
60317/62/9804
Lloyds Register QA
LAFAQ
ASME Accreditation and
Certification
ASME Accreditation and
Certification
TV Nord e.V.
(independent German
authority)
SLV-Hannover
No. 1606
No. DNV 5477
CEXO-99/00210
TRACTEBEL (Vincotte)
DET NORSKE VERITAS
NUPIC
QSC 552
0.14
0.15
0
12. FORM OF SHIPMENT
All components are shipped in appropriate
packaging for transport and short-term storage. They are clearly marked and, if required,
protected through special preventive measures against corrosive influences.
Special features are noted in the type data
sheets or installation instructions. By special
order, complete pipe support arrangements
(load chains from different components) are
preassembled, bundled and labelled for
identification.
13. WARRANTY
For all LISEGA components a two-year warranty is issued from date of commissioning
or for 8,000 hours of operation, limited to
four years after commissioning. For the
number of hours of operation the plant
records are applicable; the duration of the
warranty is limited to a maximum of five
years after shipment.
14. TECHNICAL MODIFICATIONS
LISEGA expressly reserves the right to introduce modifications in the interests of further
technical development.
0.16
CONSTANT HANGERS,
CONSTANT SUPPORTS
1
PRODUCT
GROUP
CONSTANT HANGERS
CONSTANT SUPPORTS
CONTENTS
PAGE
PRODUCT
GROUP
6
7
8
9
1.0
1. Simple planning
standard cover for the respective load
spectrum 10 - 112400 lbs [0.05 - 500kN],
travel range up to 351/2 inch [900mm]
easy selection via load groups and
travel ranges
clearly arranged type identification
system facilitates orientation
symmetric and particularly compact
designs of low installed weight
user-friendly planning documentation,
such as informative catalogs, technical
manuals and special publications
efficient LICAD design software, the
special planning system for LISEGA
standard supports
optimum fit within installation environment via standard variants and accessories (e.g. constant hangers suspended,
seated, as supports or trapezes)
only one load connection point for the
steel structure is needed
1.1
1
Construction series 64
2. Easy installation
compact, symmetric designs with only
one suspension point and practical
installation aids
favorable weight performance ratios of
the units reduce skeleton weight
precision fit attachment devices by way
of standardized elements
intelligent travel stop enables easy
conformity checks of set load and
operating load
extra wide load adjustment ranges
(40 - 100% of nominal load) permit later
adjustment in the event of deviation in
piping weights
Construction series 72
4. Easy monitoring
Construction series 85
1.2
SELECTION TABLE
Constant hangers, constant supports
30
28
26
24
22
20
18
16
14
12
10
Travel (inch)
Load (lbs)
Selection
example:
5485 lbs /
101/2 inch
Type description
11 66
11 76
11 86
11 96
12 86
12 96
13 86
13 96
14 86
14 96
Intermediate
values can be
interpolated
11 15
11 25
11 35
11 45
11 55
11 65
11 75
11 85
11 95
12 85
12 95
13 85
13 95
14 85
14 95
11 14
11 24
11 34
11 44
11 54
11 64
11 74
11 84
11 94
12 84
12 94
13 84
13 94
14 84
14 94
11 C3
11 D3
11 13
11 23
11 33
11 43
11 53
11 63
11 73
11 83
11 93
12 83
12 93
13 83
13 93
14 83
14 93
Load (lbs)
11 D2
11 12
11 22
11 32
11 42
11 52
11 62
11 72
11 82
11 92
12 82
12 92
13 82
13 92
14 82
14 92
27
55
109
219
438
877
1755
3505
5260
7010
8765
14020
17525
21030
26290
28045
35055
30
61
121
243
486
972
1945
3885
5830
7770
9715
15545
19430
23315
29150
31095
38865
33
66
133
267
533
1070
2135
4265
6400
8535
10670
17070
21335
25605
32005
34140
42675
35
70
140
281
562
1125
2250
4495
6745
8990
11240
17985
22480
26975
33720
35970
44960
37
74
147
295
591
1180
2365
4725
7090
9445
11810
18900
23625
28345
35435
37800
47245
40
79
159
319
638
1280
2555
5105
7660
10210
12765
20425
25530
30635
38290
40845
51055
43
85
171
343
686
1375
2745
5485
8230
10970
13715
21950
27435
32920
41150
43895
54865
46
91
183
367
733
1470
2935
5865
8805
11735
14670
23470
29340
35205
44005
46945
58675
5 1/2
53/4
515/16
53/4
51/2
51/4
117/8
111/2
10
...2..(515/16 inch)
5 1/4
10 1/2
11
111/2
11
101/2
...4..(173/4 inch)
15 3/4
16 1/2
171/4
173/4
171/4
161/2
153/4
15
23
22
21
20
283/4
271/2
261/4
25
...3..(117/
8 inch)
...5..(233/4 inch)
21
22
23
233/4
...6..(291/2 inch)
26 1/4
27 1/2
283/4
291/2
1.3
(see 1.9 and 1.10 ), the load group and travel range
of the corresponding hanger type 11 apply.
Travel (inch)
18000
Load (lbs)
22500
27000
31500
36000
40500
45000
49500
54000
58500
63000
67500
72000
76500
81000
85500
Load (lbs)
61
121
242
486
972
1945
3890
7770
11660
15540
19430
31095
38865
46635
58295
62185
77725
64
127
254
510
1020
2040
4080
8150
12230
16305
20385
32615
40770
48920
61155
65235
81540
66
133
266
533
1065
2135
4270
8535
12805
17065
21335
34140
42675
51205
64010
68280
85350
70
141
281
562
1125
2250
4495
8990
13490
17985
22480
35970
44960
53955
67440
71940
89925
33/4
31/2
31/4
215/16
in.
71/
61/2
515/16
in.
12 3 / 4
12
111/4
101/2
93/4
87/8
in.
in.
in.
52
103
206
414
829
1660
3320
6630
9945
13255
16575
26520
33150
39775
49725
53040
66295
55
109
218
438
876
1755
3510
7010
10520
14020
17525
28045
35055
42065
52580
56090
70105
4 3/4
4 1/2
4 1/4
9 1/2
8 1/
14 1/4
13 1/2
19
18
17
23 3/4
22 1/
211/4
Type description
81
163
326
654
1305
2615
5235
10455
15690
20910
26145
41835
52290
62745
78435
83670
104580
49
97
195
391
781
1565
3125
6245
9375
12495
15620
24995
31245
37490
46865
49990
62485
58
115
230
462
924
1850
3700
7390
11090
14780
18480
29570
36960
44350
55440
59135
73915
16
15
14
13
117/8
20
183/
171/2
161/4
143/4
90000
93
186
373
748
1495
2995
5990
11970
17960
23940
29935
47895
59865
71835
89800
95790
119730
11 D2
11 12
11 22
11 32
11 42
11 52
11 62
11 72
11 82
11 92
12 82
12 92
13 82
13 92
14 82
14 92
11 C3
11 D3
11 13
11 23
11 33
11 43
11 53
11 63
11 73
11 83
11 93
12 83
12 93
13 83
13 93
14 83
14 93
11 14
11 24
11 34
11 44
11 54
11 64
11 74
11 84
11 94
12 84
12 94
13 84
13 94
14 84
14 94
11 15
11 25
11 35
11 45
11 55
11 65
11 75
11 85
11 95
12 85
12 95
13 85
13 95
14 85
14 95
11 66
11 76
11 86
11 96
12 86
12 96
13 86
13 96
14 86
14 96
1.4
CONSTANT HANGER
TYPE 11
Constant hanger
Type 11 C3 29 to 11 96 25
Series-made standard
design, available from stock.
Installation dimension E
applies to the uppermost blocking position.
In other positions, E increases
accordingly.
X = minimum thread
engagement.
On lower connection
max thread engagement =
X + 12 inch.
Order details:
Constant hanger
type 11 .. ..
Marking:
Operating load: lbs
Travel: inch up/down
Blocking position
(if required):
1.5
Type
11 C3 29
11 D2 29
11 D3 29
11 12 25
11 13 25
11 14 25
11 15 25
11 22 25
11 23 25
11 24 25
11 25 25
11 32 25
11 33 25
11 34 25
11 35 25
11 42 25
11 43 25
11 44 25
11 45 25
11 52 25
11 53 25
11 54 25
11 55 25
11 62 25
11 63 25
11 64 25
11 65 25
11 66 25
11 72 25
11 73 25
11 74 25
11 75 25
11 76 25
11 82 25
11 83 25
11 84 25
11 85 25
11 86 25
11 92 25
11 93 25
11 94 25
11 95 25
11 96 25
133/4
113/4
161/4
151/4
161/4
171/4
181/4
171/2
5 1/4
4 1/4
5 1/4
5 1/4
5 1/4
5 1/4
5 1/4
6 1/4
6 1/4
6 1/4
6 1/2
6 3/4
6 3/4
6 3/4
6 3/4
7 1/
18
19
203/4
171/2
191/4
203/4
231/2
193/4
221/2
24
261/4
231/4
28
291/4
331/4
281/2
32
331/4
343/4
45
303/4
331/2
391/4
453/4
501/4
32
371/4
433/4
471/4
491/2
34
43
483/4
491/2
511/2
7 1/4
7 1/4
7 1/2
9
9
9
9
10 3/4
10 3/4
10 3/4
10 3/4
11
11 3/4
11 3/4
11 3/4
12
12
12 1/2
12 1/2
12 1/2
12 1/2
12 3/4
13 3/4
13 3/4
13 3/4
14
14
6
6
6 3/4
5 1/2
5 1/2
5 1/2
6
7
7 1/4
7 1/4
7 3/4
7 1/2
7 1/2
7 1/2
7 3/4
8 3/4
8 3/4
8 3/4
9 1/2
103/4
103/4
111/4
111/4
131/4
131/4
131/2
131/2
131/2
15
15
153/4
153/4
153/4
151/4
151/4
153/4
161/2
161/2
171/4
171/4
18
18
18
D
4 1/4
3 1/2
4 1/4
4 1/4
4 1/4
4 1/4
4 1/4
5 1/4
5 1/4
5 1/4
5 1/4
5 1/4
5 1/4
5 1/4
5 1/4
d2
3/
8
3/
8
3/
8
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
5/
8
5/
8
5/
8
5/
8
3/
4
3/
4
3/
4
3/
4
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
6
UNC
6
UNC
6
UNC
6
UNC
7 1/2 1 UNC
7 1/2 1 UNC
7 1/2 1 UNC
7 1/2 1 UNC
9 1 1/4 UNC
9 1 1/4 UNC
9 1 1/4 UNC
9 1 1/4 UNC
9 1/4 1 1/4 UNC
10 1 1/2 UNC
10 1 1/2 UNC
10 1 1/2 UNC
10 1 1/2 UNC
10 1 1/2 UNC
10 1 3/4 UNC
10 1 3/4 UNC
10 1 3/4 UNC
10 1 3/4 UNC
10 1/4 1 3/4 UNC
10 3/4 2 UNC
10 3/4 2 UNC
10 3/4 2 UNC
11 2 UNC
11 2 UNC
d5
0.35
0.43
0.43
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.63
0.63
0.63
0.63
0.78
0.78
0.78
0.78
0.98
0.98
0.98
0.98
0.98
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
d6
0.35
0.43
0.43
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M24
M24
M24
M24
E
20 3/4
13 3/4
21 1/2
14 3/4
25 1/2
36 3/4
48 1/4
15 1/4
25 1/2
37 1/4
47 3/4
15 1/4
26 1/2
38 1/4
49 1/2
17 1/2
29 1/4
42 1/4
54
18 1/2
30 1/4
43 1/2
55 1/4
21 3/4
35 1/4
50 1/2
64 1/4
80
24
37 1/4
54
67 1/4
84 3/4
27 3/4
45
64 3/4
82
101 3/4
30
46 3/4
68 1/4
85
106 1/4
H
18
9 3/4
17 1/2
10 1/2
17 1/2
24 1/4
31 1/4
10 3/4
18
25
32
10 3/4
18 1/2
25 1/2
32 3/4
12 1/2
19 1/2
26 1/2
33 3/4
13 1/2
20 1/4
27 3/4
34 3/4
16 1/2
22 1/4
29 1/2
36 1/2
52 1/4
18
25
31
38 1/2
56
23
28 1/4
36 1/2
44
64
24 3/4
31
37 3/4
43
63 3/4
L
10
9
10 1/4
11 1/4
11 1/4
11 1/4
11 1/2
13 3/4
14 1/4
141/4
14 1/2
14 1/4
14 1/4
14 1/4
14 1/2
15 3/4
16 1/4
16 1/4
16 1/2
19 1/4
19 1/4
19 1/4
19 1/4
22 3/4
22 3/4
23 1/2
231/2
23 1/2
25 1/2
25 1/2
25 1/2
26
26
251/2
25 1/2
26 1/2
27 1/4
27 1/4
29 1/2
29 1/2
30 1/4
30 1/4
301/4
11/
101/
9 1/
13/4
13/4
13/4
33/8
33/8
33/8
33/8
33/8
33/8
33/8
33/8
43/8
43/8
43/8
43/8
41/8
41/8
41/8
41/8
41/2
0
73/4
13/4 11
51/4
1
3/
3
4 10 /4
1
123/4
1
173/4
3/
51/2
4
3
1 /4 103/4
13/4 121/2
1
18
1/
61/2
2
3
2 /4 101/4
2
141/2
2
181/4
1
101/4
1
4 /4 93/4
21/4 141/2
21/2 211/4
11/4 81/4
41/4 111/4
3
161/4
21/4 203/4
11/2 91/2
61/4 113/4
6
14
43/4 18
251/2
6
2
111/4
1
/
5 2 113/4
73/4 153/4
21/2 261/4
81/4 28
13
2
81/2 131/2
12
151/4
5
291/4
3
/
9 4 331/2
2
133/4
93/4 14
15
15
93/4 23
111/2 311/2
5
10
1 1/ 2
6 1/ 2
8 3/ 4
133/4
1 3/ 4
7 3/ 4
9 3/ 4
141/4
1 1/ 4
7 1/ 4
101/2
141/2
5 1/ 4
8 1/ 4
103/4
18
2 3/ 4
8 1/ 2
121/4
161/4
3 1/ 4
101/4
121/4
15
231/2
4 1/ 4
8
141/4
191/4
261/2
4 1/ 2
11
161/2
231/2
321/2
5 1/ 4
123/4
19
221/2
321/4
5
5
51/4
53/4
53/4
57/8
57/8
57/8
63/4
63/4
7
71/4
71/4
77/8
77/8
77/8
77/8
77/8
75/8
75/8
75/8
75/8
75/8
X Weight
(lbs)
1/
31
2
1/
22
2
1/
42
2
1/
33
2
1/
55
2
1/
75
2
1/
115
2
1/
46
2
1/
77
2
1/
106
2
1/
165
2
3/
60
4
3/
95
4
3/
134
4
3/
223
4
1
97
1
146
1
203
1
331
11/4 161
11/4 253
11/4 350
11/4 467
11/2 295
11/2 403
11/2 582
11/2 743
11/2 1090
13/4 430
13/4 578
13/4 833
13/4 1213
13/4 1520
2
580
2
802
2 1122
2 1612
2 2130
21/4 741
21/4 1047
21/4 1493
21/4 1900
21/4 2490
BRACKETS FOR
CONSTANT HANGER TYPE 11
Detail Z
Lug for transport
Base plate
Const h. Brackets
Type Type
11 C3 29 71 C3 .9
11 D2 29 71 D2 .9
11 D3 29 71 D3 .9
11 12 25 71 12 .5
11 13 25 71 13 .5
11 22 25 71 22 .5
11 23 25 71 23 .5
11 32 25 71 32 .5
11 33 25 71 33 .5
11 34 25 71 34 .5
11 35 25 71 35 .5
11 42 25 71 42 .5
11 43 25 71 43 .5
11 44 25 71 44 .5
11 45 25 71 45 .5
11 52 25 71 52 .5
11 53 25 71 53 .5
11 54 25 71 54 .5
11 55 25 71 55 .5
11 62 25 71 62 .5
11 63 25 71 63 .5
11 64 25 71 64 .5
11 65 25 71 65 .5
11 66 25 71 66 .5
11 72 25 71 72 .5
11 73 25 71 73 .5
11 74 25 71 74 .5
11 75 25 71 75 .5
11 76 25 71 76 .5
11 82 25 71 82 .5
11 83 25 71 83 .5
11 84 25 71 84 .5
11 85 25 71 85 .5
11 86 25 71 86 .5
11 92 25 71 92 .5
11 93 25 71 93 .5
11 94 25 71 94 .5
11 95 25 71 95 .5
11 96 25 71 96 .5
B1
23/4
23/4
23/4
41/2
41/2
51/2
51/2
51/2
51/2
51/2
51/2
61/4
61/4
61/4
61/4
73/4
73/4
73/4
73/4
93/4
93/4
93/4
93/4
93/4
103/4
103/4
103/4
103/4
103/4
11
11
113/4
121/2
121/2
113/4
113/4
121/2
131/2
131/2
C
6
6
6 3/4
5 1/2
5 1/2
7
7 1/4
7 1/2
7 1/2
7 1/2
7 3/4
8 3/4
8 3/4
8 3/4
9 1/2
10 3/4
10 3/4
11 1/4
11 1/4
13 1/4
13 1/4
13 1/2
13 1/2
13 1/2
15
15
15 3/4
15 3/4
15 3/4
15 1/4
15 1/4
15 3/4
16 1/2
16 1/2
17 1/4
17 1/4
18
18
18
d4
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
3/
4
3/
4
3/
4
3/
4
7/
8
7/
8
7/
8
7/
8
7/
8
1
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
E F G1
10 1/2 1 1/2 32
5 3/4 1 1/2 20
10 1/2 1 1/2 32 1/2
5 3/4 2 1/4 21
10 1/2 2 1/4 36 1/2
21 1/2
5 3/ 4 3
1
36 1/2
10 /2 3
22
6
3
38
10 3/4 3
54 1/4
15 1/4 3
70 1/4
20
3
1
/
6
3 4 24 1/2
10 3/4 3 1/4 41
15 1/2 3 1/4 58 1/2
20 1/4 3 1/4 75 1/4
6 1/4 3 1/2 26
11
3 1/2 42 1/2
3
15 /4 3 1/2 60 1/2
20 1/2 3 1/2 77
6 1/2 4 1/4 29 3/4
11 1/4 4 1/4 48
16
4 1/4 68
3
20 /4 4 1/4 86 1/4
13 1/2 4 1/4 95
7
4 1/2 32 3/4
1
11 /2 4 1/2 50 1/2
16 1/4 4 1/2 72 1/4
21
4 1/2 90 1/4
11
4 1/2 97 1/2
7
4 3/4 36 3/4
3
11 /4 4 3/4 58 3/4
16 1/2 4 3/4 83 1/4
21 1/4 4 3/4 105 1/4
10 3/4 4 3/4 114 1/2
7 1/2 5 1/2 39 3/4
12 1/4 5 1/2 61 1/2
17
5 1/2 87 1/2
3
21 /4 5 1/2 109
10 1/4 5 1/2 119
K1
14
10 1/4
15
10 3/4
19
10 3/4
18 3/4
11 1/4
19 1/2
28 3/4
37 1/2
12
21 1/2
32
41 1/2
12 1/2
22 1/4
32 3/4
42 1/4
13 1/4
25 3/4
38 1/2
49 3/4
42 1/2
14 3/4
25 1/2
41 1/4
51 3/4
41 1/4
13 3/4
30 1/2
46 3/4
61 1/2
50 1/2
15
30 1/2
49 3/4
66 1/4
55
L
10
9
10 1/4
11 1/4
11 1/4
13 3/4
14 1/4
14 1/4
14 1/4
14 1/4
14 1/2
15 3/4
16 1/4
16 1/4
16 1/2
19 1/4
19 1/4
19 1/4
19 1/4
22 3/4
22 3/4
23 1/2
23 1/2
23 1/2
25 1/2
25 1/2
25 1/2
26
26
25 1/2
25 1/2
26 1/2
27 1/4
27 1/4
29 1/2
29 1/2
30 1/4
30 1/4
30 1/4
M
151/2
131/2
18
171/4
181/2
20
201/2
20
213/4
23
253/4
221/2
251/4
263/4
29
261/2
31
321/2
361/2
32
353/4
363/4
381/2
483/4
341/2
371/4
43
491/2
54
363/4
42
481/2
52
541/4
391/4
481/4
54
541/2
561/2
N
T
U
1/
2 1/4
4
1/
2 1/4
4
1
/
2 1/4
4
1/
2
4
4
1/
2
4
4
21/2 1/4 4 3/4
21/2 1/4 4 3/4
23/4 3/8 4 3/4
23/4 3/8 4 3/4
23/4 3/8 4 3/4
23/4 3/8 4 3/4
31/8 3/8 5 1/2
31/8 3/8 5 1/2
31/8 3/8 5 1/2
31/8 3/8 5 1/2
43/8 1/2 7
43/8 1/2 7
43/8 1/2 7
43/8 1/2 7
53/8 1/2 8 3/4
53/8 1/2 8 3/4
53/8 1/2 8 3/4
53/8 1/2 8 3/4
53/8 1/2 8 3/4
53/8 5/8 9 1/2
53/8 5/8 9 1/2
53/8 5/8 9 1/2
53/8 5/8 9 1/2
53/8 5/8 9 1/2
51/2 5/8 9 1/2
51/2 5/8 9 1/2
51/2 5/8 10 1/4
51/2 5/8 11
51/2 5/8 11
51/2 3/4 10 1/4
51/2 3/4 10 1/4
51/2 3/4 11
51/2 3/4 12 1/2
51/2 3/4 12 1/2
y
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
Weight
(lbs)
11
11
18
26
37
33
46
35
51
71
88
40
64
90
108
66
93
128
159
99
137
198
247
247
123
176
234
282
282
143
201
306
406
406
181
240
357
602
602
Order details:
Constant hanger
type 11 .. .. with bracket
type 71 .. ..
(bracket bolted on)
Marking:
Operating load: lbs,
Travel: inch up/down
Blocking position
(if required):
1.6
CONSTANT HANGER
TYPE 12-14
+97/8
-23/4
Constant hangers
type 12 82 35 to 14 96 35
Standard design, multi-cell
hanger.
Assembly possible at short
notice from stock units.
Dimension E applies to
uppermost blocking position.
For other positions E increases
accordingly.
Order details:
Constant hanger
type 1. .. 35
Marking:
Operating load: lbs
Travel: inch up/down
Blocking position
(if required):
1.7
Type
12 82 35
12 83 35
12 84 35
12 85 35
12 86 35
12 92 35
12 93 35
12 94 35
12 95 35
12 96 35
13 82 35
13 83 35
13 84 35
13 85 35
13 86 35
13 92 35
13 93 35
13 94 35
13 95 35
13 96 35
14 82 35
14 83 35
14 84 35
14 85 35
14 86 35
14 92 35
14 93 35
14 94 35
14 95 35
14 96 35
A
333/4
39
451/2
49
511/4
353/4
45
501/2
511/4
531/4
333/4
39
451/2
49
511/4
353/4
45
501/2
511/4
531/4
333/4
39
451/2
49
511/4
353/4
45
501/2
511/4
531/4
B
25
25
25
25
251/2
271/4
271/4
271/4
273/4
273/4
363/4
363/4
363/4
363/4
371/2
401/4
401/4
401/4
41
41
481/2
481/2
481/2
481/2
491/4
531/4
531/4
531/4
541/4
541/4
C
151/4
151/4
153/4
161/2
161/2
171/4
171/4
18
18
18
151/4
151/4
153/4
161/2
161/2
171/4
171/4
18
18
18
151/4
151/4
153/4
161/2
161/2
171/4
171/4
18
18
18
D
213/4
213/4
213/4
213/4
221/4
233/4
233/4
233/4
241/4
241/4
333/4
333/4
333/4
333/4
341/4
363/4
363/4
363/4
371/2
371/2
451/2
451/2
451/2
451/2
46
493/4
493/4
493/4
501/2
501/2
d3
E H
23/8 471/2 23
23/8 641/2 281/4
23/8 841/2 361/2
23/8 1013/4 44
23/8 1211/2 64
23/4 511/2 243/4
23/4 681/2 31
373/4
23/4 90
3
3
2 /4 106 /4 43
633/4
23/4 128
23/4 511/2 23
23/4 681/2 281/4
23/4 881/2 361/2
23/4 1053/4 44
23/4 1251/2 64
243/4
31/8 56
1
3
3 /8 72 /4 31
31/8 941/4 373/4
43
31/8 111
31/8 1321/4 633/4
31/8 541/2 23
31/8 713/4 281/4
31/8 911/2 361/2
31/8 1083/4 44
31/8 1281/2 64
31/2 571/2 243/4
31/2 741/2 31
31/2 953/4 373/4
31/2 1121/2 43
31/2 1333/4 633/4
L
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
M
211/4
211/4
211/4
211/4
211/2
231/4
231/4
231/4
231/2
231/2
33
33
33
33
331/4
361/4
361/4
361/4
361/2
361/2
45
45
45
45
451/4
491/4
491/4
491/4
491/2
491/2
N
113/4
113/4
113/4
113/4
12
13
13
13
131/8
131/8
2x113/4
2x113/4
2x113/4
2x113/4
2x12
2x13
2x13
2x13
2x131/8
2x131/8
3x113/4
3x113/4
3x113/4
3x113/4
3x12
3x13
3x13
3x13
3x131/8
3x131/8
O
2
81/2
12
5
93/4
2
93/4
15
93/4
111/2
2
81/2
12
5
93/4
2
93/4
15
93/4
111/2
2
81/2
12
5
93/4
2
93/4
15
93/4
111/2
P
13
131/2
151/4
291/4
331/2
133/4
14
15
23
311/2
13
131/2
151/4
291/4
331/2
133/4
14
15
23
311/2
13
131/2
151/4
291/4
331/2
133/4
14
15
23
311/2
R
31/2
31/2
31/2
31/2
31/2
41/4
41/ 4
41 / 4
41/ 4
41/4
41/4
41/4
41/4
41/4
41/4
43/4
43/4
43/4
43/4
43/4
43/4
43/4
43/4
43/4
43/4
51/4
51/ 4
51/4
51/ 4
51/4
R1max. S
33/4 11/8
33/4 11/8
33/4 11/8
33/4 11/8
33/4 11/8
41/4 13/8
41/4 13/8
41/4 13/8
41/4 13/8
41/4 13/8
5 13/8
5 13/8
5 13/8
5 13/8
5 13/8
51/2 13/8
51/2 13/8
51/2 13/8
51/2 13/8
51/2 13/8
7 13/8
7 13/8
7 13/8
7 13/8
7 13/8
7 11/2
7 11/2
7 11/2
7 11/2
7 11/2
W
61/4
61/4
61/4
61/4
61/4
7
7
7
7
7
81/4
81/4
81/4
81/4
81/4
9
9
9
9
9
93/4
93/4
93/4
93/4
93/4
93/4
93/4
93/4
93/4
93/4
Weight
(lbs)
1355
1805
2450
3430
4455
1730
2355
3250
4070
5250
2110
2790
3750
5225
6770
2675
3610
4950
6190
7975
2870
3780
5070
7030
9095
3670
4920
6710
8360
10740
BRACKETS FOR
CONSTANT HANGER TYPE 12-14
11/4
+97/8
-23/4
Detail Z
11/4
Const. h.
Type
12 82 35
12 83 35
12 84 35
12 85 35
12 86 35
12 92 35
12 93 35
12 94 35
12 95 35
12 96 35
13 82 35
13 83 35
13 84 35
13 85 35
13 86 35
13 92 35
13 93 35
13 94 35
13 95 35
13 96 35
14 82 35
14 83 35
14 84 35
14 85 35
14 86 35
14 92 35
14 93 35
14 94 35
14 95 35
14 96 35
Brackets
Type
71 82 .6
71 83 .6
71 84 .6
71 85 .6
71 86 .6
71 92 .6
71 93 .6
71 94 .6
71 95 .6
71 96 .6
71 82 .7
71 83 .7
71 84 .7
71 85 .7
71 86 .7
71 92 .7
71 93 .7
71 94 .7
71 95 .7
71 96 .7
71 82 .8
71 83 .8
71 84 .8
71 85 .8
71 86 .8
71 92 .8
71 93 .8
71 94 .8
71 95 .8
71 96 .8
A1
401/4
451/2
52
551/2
58
431/2
521/2
581/4
583/4
603/4
401/4
451/2
52
551/2
58
431/2
521/2
581/4
583/4
603/4
401/4
451/2
52
551/2
58
431/2
521/2
581/4
583/4
603/4
B1
223/4
223/4
231/2
241/2
241/2
243/4
243/4
251/2
261/2
261/2
341/2
341/2
351/2
361/4
361/4
373/4
373/4
381/2
393/4
393/4
461/2
461/2
471/4
48
481/2
503/4
503/4
511/2
523/4
523/4
C
151/4
151/4
153/4
161/2
161/2
171/4
171/4
18
18
18
151/4
151/4
153/4
161/2
161/2
171/4
171/4
18
18
18
151/4
151/4
153/4
161/2
161/2
171/4
171/4
18
18
18
E
7
113/4
161/2
211/4
103/4
71/2
121/4
17
213/4
101/4
7
113/4
161/2
211/4
103/4
71/2
121/4
17
213/4
101/4
7
113/4
161/2
211/4
103/4
71/2
121/4
17
213/4
101/4
F
43/4
43/4
43/4
43/4
43/4
51/2
51/2
51/2
51/2
51/2
43/4
43/4
43/4
43/4
43/4
51/2
51/2
51/2
51/2
51/2
43/4
43/4
43/4
43/4
43/4
51/2
51/2
51/2
51/2
51/2
G1
383/4
601/2
851/4
1071/4
1161/4
42
631/2
893/4
1111/4
121
383/4
601/2
851/4
1071/4
1161/4
42
631/2
893/4
1111/4
121
383/4
601/2
851/4
1071/4
1161/4
42
631/2
893/4
1111/4
121
G2
43
601/4
80
971/2
117
463/4
633/4
851/4
102
1231/4
45
621/4
82
991/2
119
49
66
871/2
1041/4
1251/2
461/2
633/4
831/2
101
1203/4
493/4
663/4
881/4
105
1261/4
K1
133/4
301/2
463/4
611/2
501/2
15
301/2
493/4
661/4
55
133/4
301/2
463/4
611/2
501/2
15
301/2
493/4
661/4
55
133/4
301/2
463/4
611/2
501/2
15
301/2
493/4
661/4
55
M1
363/4
42
481/2
52
541/2
391/4
481/4
54
541/2
561/2
363/4
42
481/2
52
541/2
391/4
481/4
54
541/2
561/2
363/4
42
481/2
52
541/2
391/4
481/4
54
541/2
561/2
N T
113/4 1/2
113/4 1/2
113/4 1/2
113/4 1/2
1/
12
2
3/
13
4
3/
13
4
3/
13
4
131/8 3/4
131/8 3/4
113/4 1/2
113/4 1/2
113/4 1/2
113/4 1/2
1/
12
2
3/
13
4
3/
13
4
3/
13
4
131/8 3/4
131/8 3/4
113/4 1/2
113/4 1/2
113/4 1/2
113/4 1/2
1/
12
2
3/
13
4
3/
13
4
3/
13
4
131/8 3/4
131/8 3/4
U
91/2
91/2
101/4
11
11
101/4
101/4
11
121/2
121/2
91/2
91/2
101/4
11
11
101/4
101/4
11
121/2
121/2
91/2
91/2
101/4
11
11
101/4
101/4
11
121/2
121/2
Z
113/4
113/4
113/4
113/4
12
13
13
13
131/8
131/8
235/8
235/8
235/8
235/8
24
26
26
26
261/4
261/4
351/2
351/2
351/2
351/2
36
39
39
39
391/2
391/2
Weight
(lbs)
313
428
644
844
844
399
518
752
1265
1265
476
648
970
1270
1270
608
787
1135
1905
1905
637
864
1294
1695
1700
814
1052
1515
2542
2545
Order details:
Constant hanger type 1. .. ..
with bracket type 71 .. ..
bolted on.
Marking:
Operating load: lbs
Travel: inch up/down
Blocking position
(if required):
1.8
CONSTANT SUPPORT
TYPE 16
Constant support
type 16 D2 19 to 16 93 15
Standard design
Order details:
Constant support
type 16 .. ..
Marking:
Operating load: lbs
Travel: inch up/down
Blocking position
(if required):
Type
16 D2 19
16 D3 19
16 12 15
16 13 15
16 22 15
16 23 15
16 32 15
16 33 15
16 42 15
16 43 15
16 52 15
16 53 15
16 62 15
16 63 15
16 72 15
16 73 15
16 82 15
16 83 15
16 92 15
16 93 15
A
113/4
161/4
151/4
161/4
171/2
18
171/2
191/4
193/4
221/2
231/4
28
281/2
32
303/4
331/2
32
371/4
34
43
A1
91/2
101/4
103/4
103/4
131/2
131/2
133/4
133/4
151/4
151/4
19
19
221/2
221/2
251/4
251/4
251/4
251/4
291/4
291/4
B
41/4
51/4
51/4
51/4
61/4
61/4
63/4
63/4
71/4
71/4
9
9
103/4
103/4
113/4
113/4
121/2
121/2
133/4
133/4
B1
23/4
23/4
41/2
41/2
51/2
51/2
51/2
51/2
61/4
61/4
73/4
73/4
93/4
93/4
103/4
103/4
11
11
113/4
113/4
D
31/2
41/4
41/4
41/4
51/4
51/4
51/4
51/4
6
6
71/2
71/2
9
9
10
10
10
10
103/4
103/4
d4
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
3/
4
3/
4
7/
8
7/
8
1
1
11/4
11/4
11/4
11/4
1.9
E
28
471/2
283/4
511/4
29
511/4
291/4
521/4
313/4
551/4
323/4
561/2
361/4
611/2
39
64
431/4
721/4
46
741/2
F
13/4
13/4
21/4
21/4
3
3
3
3
31/4
31/4
31/2
31/2
41/4
41/4
41 / 2
41 / 2
43/4
43/4
51/2
51/2
H
93/4
171/2
101/2
171/2
101/2
18
103/4
181/2
121/2
191/2
131/2
201/4
161/2
221/4
18
25
23
281/4
243/4
31
K
101/2
161/4
103/4
201/4
103/4
193/4
103/4
201/4
11
213/4
11
213/4
111/4
251/4
121/2
241/2
113/4
293/4
121/2
291/4
L1
L
31/4
31/4
31/4
31/4
4
4
4
4
43/4
43/4
6
6
63/4
63/4
73/4
73/4
73/4
73/4
91/2
91/2
M
7
73/4
81/4
81/4
101/4
101/4
103/4
103/4
113/4
113/4
15
15
173/4
173/4
201/4
201/4
191/4
191/4
221/2
221/2
N
2
2
21/2
21/2
23/4
23/4
31/8
31/8
43/8
43/8
53/8
53/8
53/8
53/8
51/2
51/2
51/2
51/2
P
S
73/4 1/4
1/
13/4 11
4
1
1
5 /4 1/4
3/ 103/
1/
4
4
4
3/
1/
1/
5
4
2
4
13/4 103/4 1/4
1/
1
1/
2 6 /2
4
3
1
/
/
2 4 10 4 1/4
1 101/4 1/4
41/4 93/4 1/4
11/4 81/4 3/8
41/4 111/4 3/8
11/2 91/2 3/8
61/4 113/4 3/8
2 111/4 1/2
51/2 113/4 1/2
5/
2 13
8
1
1
8 /2 13 /2 5/8
2 133/4 3/4
3/
93/4 14
4
Weight
(lbs)
1/
33
4
1/
55
4
1/
51
4
1/
86
4
1/
73
4
1/
4 123
3/
86
8
3/
8 141
3/
8 130
3/
8 205
1/
2 212
1/
2 342
1/
2 362
1/
2 527
5/
8 521
5/
8 736
5/
8 675
5/
8 990
3/
4 855
3/ 1257
4
T
Type
Load group
70 19 16
D, 1
70 39 16
2, 3
70 49 16
4
70 59 16
5
70 69 16
6
70 79 16
7
70 89 16
8
70 99 16
9
L1
15/8
15/8
21/2
21/2
43/8
43/8
57/8
57/8
Angulating constant
supports
type 16 D2 29 to 16 93 25
equipped with ball bush
connections.
For use where lateral forces
from horizontal travel are
to be avoided.
weld-on bracket
LH thread
RH thread
Type
16 D2 29
16 D3 29
16 12 25
16 13 25
16 22 25
16 23 25
16 32 25
16 33 25
16 42 25
16 43 25
16 52 25
16 53 25
16 62 25
16 63 25
16 72 25
16 73 25
16 82 25
16 83 25
16 92 25
16 93 25
A
113/4
161/4
151/4
161/4
171/2
18
171/2
191/4
193/4
221/2
231/4
28
281/2
32
303/4
331/2
32
371/4
34
43
A1
91/2
101/4
103/4
103/4
131/2
131/2
133/4
133/4
151/4
151/4
19
19
221/2
221/2
251/4
251/4
251/4
251/4
291/4
291/4
B1
23/4
23/4
41/2
41/2
51/2
51/2
51/2
51/2
61/4
61/4
73/4
73/4
93/4
93/4
103/4
103/4
11
11
113/4
113/4
d3
0.393
0.393
0.393
0.393
0.472
0.472
0.590
0.590
0.590
0.590
0.787
0.787
0.787
0.787
1.181
1.181
1.181
1.181
1.968
1.968
E1
31
501/2
32
541/2
321/2
543/4
331/4
561/4
353/4
591/2
381/2
62
42
671/4
46
71
501/2
791/2
54
823/4
G+23/8
73/4
131/2
73/4
131/2
73/4
131/2
73/4
131/2
81/4
141/4
81/2
141/2
81/2
141/2
81/2
141/2
83/4
141/2
83/4
143/4
J+51/2
13/4
13/4
13/4
13/4
2
2
2
2
2
2
31/4
31/4
31/4
31/4
33/4
33/4
33/4
33/4
41/4
41/4
K1
103/4
163/4
11
203/4
111/4
201/4
111/2
21
113/4
221/2
113/4
221/2
121/4
26
131/2
251/2
123/4
303/4
131/2
30
R
5/
5/
5/
5/
3/
4
3/
4
13/
16
13/
16
13/
16
13/
16
13/16
13/16
13/16
13/16
15/8
15/8
15/8
15/8
23/8
23/8
SG
0.36
0.36
0.36
0.36
0.40
0.40
0.48
0.48
0.48
0.48
0.63
0.63
0.63
0.63
0.87
0.87
0.87
0.87
1.38
1.38
SW
1.06
1.06
1.06
1.06
1.26
1.26
1.42
1.42
1.42
1.42
2.36
2.36
2.36
2.36
2.36
2.36
2.36
2.36
2.75
2.75
U
1
1
1
1
1
1
11/4
11/4
11/4
11/4
11/2
11/2
11/2
11/2
21/4
21/4
21/4
21/4
23/4
23/4
Weld-on
bracket
35 19 13
35 19 13
35 19 13
35 19 13
35 39 13
35 39 13
35 49 13
35 49 13
35 49 13
35 49 13
35 59 19
35 59 19
35 59 19
35 59 19
35 69 19
35 69 19
35 69 19
35 69 19
35 79 19
35 79 19
Weight
(lbs)
36
57
57
92
85
135
102
157
153
228
250
380
420
585
600
815
755
1070
960
1360
Possible connection
Order details:
Angulating constant support
type 16 .. ..
Marking:
Operating load: lbs
Travel: inch up/down
Blocking position
(if required):
The ball bushes to be connected
fit weld-on bracket type 35.
1.10
CONSTANT HANGER
TRAPEZE TYPE 79
Constant hanger trapeze
type 79 D2 25 to 79 96 25
This type of trapeze applies
in case of limited installation
length where the standard
trapeze type 79 .2 34 does
not fit.
The Trapezes are normally
shop assembled.
Order details:
Trapeze type 79 .. .. with
2 constant hangers
type 11 .. ..
L= inch
Z= inch
Marking:
Operating load: lbs at
the supporting point.
Travel: inch up/down
Blocking position
(if required):
1.11
Type
79 D2 25
79 D3 25
79 12 25
79 13 25
79 22 25
79 23 25
79 32 25
79 33 25
79 34 25
79 35 25
79 42 25
79 43 25
79 44 25
79 45 25
79 52 25
79 53 25
79 54 25
79 55 25
79 62 25
79 63 25
79 64 25
79 65 25
79 66 25
79 72 25
79 73 25
79 74 25
79 75 25
79 76 25
79 82 25
79 83 25
79 84 25
79 85 25
79 86 25
79 92 25
79 93 25
79 94 25
79 95 25
79 96 25
A max.
473/4
481/2
76
76
771/4
771/4
851/2
851/2
851/2
851/2
86
86
86
861/4
913/4
913/4
913/4
913/4
931/2
931/2
931/2
931/2
933/4
941/2
941/2
941/2
943/4
943/4
951/4
951/4
951/4
951/4
951/2
961/2
961/2
961/2
963/4
963/4
B
123/4
171/4
201/4
211/2
223/4
231/4
233/4
251/2
27
293/4
251/4
28
291/2
313/4
291/4
333/4
351/4
391/2
351/4
383/4
40
411/2
513/4
381/4
41
471/4
531/2
58
40
45
511/2
55
571/2
42
51
563/4
571/4
591/4
C
141/4
22
151/4
26
153/4
261/4
161/4
271/4
39
501/4
181/4
30
43
55
193/4
311/2
443/4
561/2
231/4
363/4
52
651/2
811/4
253/4
39
56
69
861/2
293/4
463/4
663/4
84
1033/4
321/4
491/4
703/4
871/2
1083/4
D
41/4
51/4
51/4
51/4
61/4
61/4
63/4
63/4
63/4
63/4
71/4
71/4
71/4
71/2
9
9
9
9
103/4
103/4
103/4
103/4
11
113/4
113/4
113/4
12
12
121/2
121/2
121/2
121/2
123/4
133/4
133/4
133/4
14
14
E
7
93/4
91/4
15
91/2
14
91/4
141/2
23
30
71/2
161/4
263/4
311/2
103/4
161/2
26
331/4
121/2
19
32
423/4
493/4
121/2
22
321/4
401/4
501/4
15
251/2
40
501/4
603/4
17
261/4
411/2
55
661/4
G
5/
8
5/
8
1 1/4
1 1/4
1 1/4
1 1/4
1 3/4
1 3/4
1 3/4
1 3/4
2 1/4
2 1/4
2 1/4
2 1/4
2 1/2
2 1/2
2 1/2
2 1/2
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 3/8
3 3/8
3 3/8
3 3/8
3 3/8
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4
4
4
4
4
FUNCTION TESTS
Functional performance
The specific functional principle of LISEGA constant hangers guarantees absolute constancy
across the entire travel range. This is not even
affected by load adjustment. Only a minor
friction force resulting from tolerances and
bearings has to be taken into account as a
slight deviation. The hysteresis produced by
this is kept within very narrow limits by the
design principle and by state-of-the-art manufacturing procedures.
For normal load settings, deviations in the
operating load for LISEGA constant hangers
in series production is kept in practice at
3% on average. Using a selection process,
supply of hangers with a maximum deviation
of 2% is possible.
The generally permissible deviations are laid
down in the following international standards:
MSS-SP 58, USA, max.
to operating load.
6% referring
Specimen of a
test certificate
from a normal
delivery test
1.12
OPERATIONAL FUNCTION
F2
E
D
Special requirements
Strict demands are placed on constant hangers to ensure reliable function:
A
F
Upper position
E
C
D
B
F1
A
F
Midposition
F2
D
C
E
B
F1
Operating function of
LISEGA constant hanger
1.13
Lower position
1
Down towards the apex of the cams the
resultant force diminishes in proportion to
the increase in the relatively low starting
force of the main spring.
LISEGA functional
principle for
constant hangers
Large load
adjustment range
Load adjustment
Load adjustment is carried out by adjusting
the pre-tension of the main spring. Because
the characteristic curves of the resultant
compensating force and those of the mainspring are identical, only a linear displacement of the starting load F1 occurs. The force
variation achieved by altering the main spring
pre-tension is the same at every point in the
movement cycle. Therefore, the ultimate load
remains constant at each load setting. The
Serial production
(favorable
manufacturing costs)
Travel
Warehousing
(short term
availability)
1.14
DESIGN FEATURES
Design shape
LISEGA constant hangers are made to a compact and symmetrical design. This facilitates
space saving installation dimensions and the
use of standard accessories. When installing
on site, much time and effort is saved by
low unit weight and simple positioning at
connection points. Only one hanging point is
needed for fitting. The load transfer passes
through the axis of symmetry. Space for radial deflection (lever arm hanger) need not be
considered. Additional moments posed on the
supporting structure by lever arm units are
therefore avoided. The design enables a direct
reading of the travel position on a scale of 1:1.
Design construction
A steel housing encases the internal working
parts such as springs and cams. The compact
arrangement of these individual parts inside
the housing leads to small external dimensions. The housing is designed to be load
bearing and to accommodate LISEGA standard
connecting components.
Serial connection types
Type 66 rod
Type 61 clevis
Type 79
trapeze
Type 71
bracket
Type 60 eyenut
Type 67 stud bolt
Connection types
The connection threads correspond to the
standardized diameter of the relevant LISEGA
load group. At the upper connection the
thread depth is limited. At the lower end, the
nut is used as a turnbuckle for adjusting rod
length.
The shape of the hanger housing allows direct
seating on existing connection structures
without extra accessories. In addition, special
brackets can be attached using the standard
tapped holes provided. Constant hangers
above load group 9 (heavy duty) have yoke
plates for bolted connections instead of
connection threads.
Performance range
Constant hangers and supports are manufactured in load groups C - 9 as serialized singlecell units. They can also be coupled together
for load groups 8 or 9 as multi-cell hangers
with heavier loads.
In this way a standardized range of 20 lbs
to 112400 lbs [0.1kN to 500kN] can be
covered. Constant hangers are manufactured
in 6 standard travel ranges: 6/ 12/ 18/ 24/
30/ 36 inch [150/ 300/ 450/ 600/ 750/
900mm] - constant supports up to 12 inch
[300mm].
Standards and calculations
Component design and layout fully comply
as regards load capacity, dynamic function
and lifespan with the relevant national and
international standards and codes. This applies equally to the materials used, welding
technology and other processes. Relevant
details can be found in the Technical
Specifications (page 0.9).
Springs
The springs are decisive for the flawless
functioning of constant hangers the long
term operational safety of these components
depends on them. DIN standards form the
basis of the LISEGA coil spring specifications.
Details can be found in the Technical
Specifications in section 0.
Steel
construction
on site
1.15
1
Spring relaxation
Conventional helical coil springs subjected to
load and temperature over a period of time
lose part of their force (spring relaxation).
In the long term, it can cause a reduction in
the adjusted support loads of more than 10%
in constant and variable spring supports
(see calculation example).
LISEGA only uses prerelaxed springs which
by an artificial aging process allow no significant settling loss. In a hot setting procedure
with extended coil lengths a corresponding
preplastification is attained. The settling loss
normally to be expected is thereby prevented.
planned
condition
connection
point /
hanger
hanger set
load
hanger load
in(1000 lbs)
in(1000 lbs)
additional z-load
y-load
at connection
point
in(1000 lbs)
additional
displacement
in inch
bo
iler
ou
tle
t
iler
bo
The maximum primary stresses were calculated in the safety valves near the boiler
connection. They were 93% higher than the
planned condition. The permissible stresses
for the connection were exceeded by 9%.
(Calculations in accordance with regulations
B31.1).
Corrosion protection
Constant hangers are finished with a LISEGA
standard coating system which in conjunction with a metallically pure treated surface
offers superior corrosion protection with high
mechanical stability. Bearings and pins are
made from stainless steel.
All threaded parts and cams are electrogalvanized and yellow chromatized.
The spring coil surfaces are given special
finishing treatment (see Technical Specifications, page 0.10).
The standard corrosion protection for constant
hangers needs no maintenance inside buildings, or in areas protected from the weather.
For components in the open and in special
cases of operation, a more comprehensive
corrosion protection can be agreed on.
1.16
INSTALLATION EXAMPLES
Universal fit
Constant hangers can be
adapted to practically any
situation in the plant by the
use of universal-fit accessories as part of the LISEGA
modular system.
2
Type
Type
Type
Type
Type
73
60
63
67
63
Type 75
Type 61
Type 67
Type 11
Type
Type
Type
Type
Type 11
Type 63
Type 66
Type 63
Type 63
Type 67
Type 61
Type 63
Type 49
Type 44
75
61
63
67
Type 49
Type 63
Type 61
Type 79
Type 79
Examples 14 - 17 show
easily-designed special
applications.
Type 73
Type 60
Type 67
6
Type 75
Type 61
Type 67
Type 11
Type 11
Type 11
Type 63
Type 67
Type 63
Type 63
Type
Type
Type
Type
Type
Type 67
Type 63
Type 67
63
61
71
61
63
Type 67
Type
Type
Type
Type
Type
Type
Type
Type
Type 49
Type 44
Type 60
Type 43
Type 63
Type 61
Type 79
Type 11
Typ 38
38
Type
Type 71
Type 63
Type 49
Type 35
Type 66
Type 63
Type 60
Type 16
Type 16
Type 43
Type 35
1.17
63
61
79
60
63
67
63
61
1
10
Type
Type
Type
Type
Type
Type
Type
73
60
67
61
79
61
63
11
Type 73
Type 60
Type 67
Type 11
Type 67
Type
Type
Type
Type
Type
Type
12
63
61
79
61
63
67
Type
Type
Type
Type
Type
Type
Type
Type 63
63
67
63
61
79
61
63
Type 67
Type 11
13
Type
Type
Type
Type
Type
73
60
63
66
63
Type 75
Type 61
Type 67
Type 11
Type 11
Type 63
Type 63
Type 66
Type 67
Type 63
Type 61
Type 48
Type 67
Type 60
Type 63
Type 61
Type 63
Type 61
Type
48
Typ 48
Type 46
Type 43
15
14
Type 11
Type 63
Type 49
Type 66
Type 63
Type 60
Type 43
Type 16
17
16
Type 71
Type 11
Type 11
Type 49
Type 63
Type 63
Type 67
Type 67
Type 63
Type 74
Type 63
Type 61
Type 71
Type 44
1.18
Application
In the ideal situation the weight of the piping
is almost balanced out with the set load of
the constant hangers. The sum of deviations
present and the additional stresses in the
piping system thereby caused then remain
within the permissible harmless range.
In certain cases, total deviation can exceed
permissible levels. In the form of secondary
stresses it can considerably reduce the life
span of the piping or its connections in the
area of creep strength depending on time.
Deviations can occur due to:
wall thickness tolerances of the pipes,
if these are not weighed individually
and weight differences are not taken
into consideration
insulation weights not exactly
determinable in advance
mechanical friction and manufacturing
tolerances within constant hangers
(permissible 5%)
relaxed springs in constant hangers
bo
iler
cen
ter
bo
iler
cen
ter
Hot setting
1.19
e
bin
tur
e
bin
tur
1
Design and function
The basis for the servo hanger is a standard
Type 11 constant hanger. To overcome load
differences, it is additionally fitted with a
hydraulic auxiliary device providing additional
active force in both directions (servo assistance).
Unit sizes
Units are available from series construction
for load groups 5 (FN 4495lbs [20kN] ) to 9
(FN 22480lbs [100kN] ) with travel range 2
(6inch [150mm] ) and 3 (12inch [300mm] ).
In special cases non-standard designs can
be manufactured.
Operating instructions
Installation and commissioning instructions
and maintenance recommendations are supplied on delivery.
Electro-hydraulic control
The hydraulic unit and the electronic control
are housed separately from each other in a
switchgear cabinet mounted near the servo
hanger (max distance 52 feet [16m] ).
The hydraulic piston controlling the movement is located in the load tube of the constant hanger.
Automatic safety switch
The electrohydraulic control is designed in
such a way that only the servo assistance is
lost if there is an operational breakdown,
e.g. a power failure. The unit itself would
carry on operating in the normal way as a
constant hanger.
For deviations in theoretical (temp.) / actual
(travel) a tolerance range can be adjusted.
The control shuts off automatically if the
deviation lies outside these values.
Manual shut off
For possible maintenance work in the system
or at the boiler, the servo assistance can be
shut on or off by hand.
Servohanger
Type
17 5. 25
17 6. 25
17 7. 25
17 8. 25
17 9. 25
Nominal
load FN
lbs
4495
8990
13490
17985
22480
Calibration
Load dependent travel
load
Travel range 2 Travel range 3
lbs
inch
inch
1800 - 4495
3-6
6 - 12
3595 - 8990
3-6
6 - 12
5395 - 13490
3-6
6 - 12
7190 - 17985
3-6
6 - 12
8990 - 22480
3-6
6 - 12
Additional
Servo force
lbs
1800
4500
4500
4500
4500
theoretical
hydr.
device
electr.
control
actual
Function scheme
1.20
INSTALLATION AND
OPERATING INSTRUCTIONS
Constant hangers are mechanically acting devices.
Their trouble free operation
is vitally important for the
safety of piping systems
and connected components.
Careful attention must be
paid to the following instructions to ensure trouble
free operation.
travel stop
guide bolt
name plate
red marking
for hot position
fixing bolt with
washer for travel stop
after deblocking
travel scale
serrated travel
stop strip
adjustment load
indicator
load scale
adjustment bolt
load tube
control bore for min.
screw-in depth
load nut
upper yoke plate
lower yoke plate
connecting rod
tensioning bolt
type
serial number
order number (if required)
set load
theoretical travel
marking (position number)
test stamp (if required)
On the travel scale, the theoretical hot position is marked with a red sticker, the theoretical cold position with a white one.
The load adjustment ordered is permanently
stamped on the load scale with an X during
final inspection.
Travel scale with
cold/hot markings
1.21
1
2.2 Constant hanger
types 12 82 - 14 96 (multi cells)
The upper connection is provided as standard
in the form of a lug for a connecting pin.
The lower attachment exists of several tensioning bolts connected by a yoke plate.
2.3 Constant hangers (seated)
Constant hangers of all sizes can be directly
seated. They can also be supplied with serialized brackets type 71. The brackets can be
bolted on at works or on site according to
order using the precision fit holes provided.
The base plates of the mountings can be either
welded or bolted to the mounting surface.
load plate
adjusting spindle
support tube
serrated travel
stop strip
blocking plate
name plate
guide pin
travel scale
securing screw &
washer for blocking
plate after deblocking
indicator for
adjustment load
load scale
adjustment bolt
2. The hanger rods are to be installed vertically for better control. A controlled angled
position during operating conditions is then
permitted.
1.22
1 rod
2 washer
3 nut
1.23
1
4.3 Load distribution
The travel stop plates must never be removed
by force!
By loosening or tightening the connecting
rods with a few turns of the load nut for constant hangers, or adjustment of the support
tube for constant supports, the locked-up
stress in the piping can be compensated so
that the blocking pin is free.
However, the geometrical layout of the piping
must not be altered when balancing these
stresses.
Because the adjustment of one position can
lead to stressing at another location, this
procedure must be repeated if necessary at
different points.
For thorough control, we recommend as a
matter of principle removing the travel stop
plates only after all the blocking pins are free.
1.24
SPRING HANGERS,
SPRING SUPPORTS
2
PRODUCT
GROUP
PAGE
PRODUCT
GROUP
5
6
7
8
9
2.0
SPRING HANGERS
SPRING SUPPORTS
To prevent constraints in
the system, thermal
expansion in the piping
and other piping components must not be hindered. The piping must therefore be supported in a correspondingly elastic manner.
Spring elements
To compensate for slight vertical displacements in the piping, spring components are
used as supports. The functioning of these
components is based on preset helical coil
springs which exert a variable supporting
load over the whole range of movement
corresponding to the given spring characteristics. Load variations resulting from this are
limited through corresponding specifications
based on stress calculations for the piping this depends on the sensitivity of the
system.
The fundamental principles relevant for the
function of the spring components are found
in the MSS SP 58 and VGB R 510 L guidelines. See Technical Specifications, page 0.5.
Type 29 with PTFE
slide plate.
2.1
2
Angulating spring supports, type 20
Unlike the spring support type 29,
horizontal displacement can be
taken up almost free of lateral
forces by this design.
This way that constraining frictional forces are completely
excluded at all levels of movement, vertical and horizontal.
Sway braces, type 27
These particular components act both in
tension and compression and are used to
stabilize the piping and other plant components. An additional damping effect is
obtained at the same time. The connection
parts correspond with those of Product
Group 3.
2.2
SELECTION OF
SPRING ELEMENTS
SELECTION CRITERIA FOR SPRING
HANGERS AND SUPPORTS
Permissible force variation
The permissible force variation between
cold load (installation load) position to
hot load (operating load) position is
limited internationally by common specifications for pipe stress analysis to max.
25% of the operating load.
Maximum working travel
Additionally, to preclude functional
impairment due to instability from extra
long springs,
a working travel of maximum 2 inch
[50mm] should not be exceeded.
Spring rates
To cover as wide a field of applications
as possible while adhering to these
standards, LISEGA spring elements are
divided into 5 travel ranges with correspondingly different spring rates.
Extra long springs
Travel ranges 4 & 5 relate to extra long
springs and should only be used after
technical evaluation of the whole situation, especially in sensitive piping
systems.
Design types
The selection of the suitable design
type depends upon the respective support configuration or installation situation.
Economical unit size
To find the most economical size, the
following procedures apply:
Spring hangers type 21, Spring hangers type 25, Spring supports type 29, Angulating spring supports type 20
Travel range
21 C2 29 21 D. 29
25 D. 19
29 C2 19 29 D. 19
20 D2 19
...1.. ...2.. ...3.. ...4.. ...5..
Working travel (inch)
9.0
27
0
0
0
0
0
1/
1/
1/
3/
12.0
33
1
8
4
2
4
1/
1/
1 1/2 2
15.0
39
4
2 1
3/
3/
1
2 1/4 3
18.0
45
8
4 1 /2
1/
2
3
20.9
51
4
2 1
5/
1
1
3 3/4 5
23.9
57
8 1 /4 2 /2
3/
1/
1/
1
3
4
26.9
62
6
4
2
2
7/
3
1
5 1/4 7
29.9
68
8 1 /4 3 /2
1
2
4
6
32.9
74
8
1 1/8 2 1/4 4 1/2 6 3/4 9
35.9
80
1 1/4 2 1/2 5
7 1/2 10
38.8
86
1 3/8 2 3/4 5 1/2 8 1/4 11
41.8
92
1 1/2 3
6
9
44.8
98
12
1 5/8 3 1/4 6 1/2 9 3/4 13
47.8 104
1 3/4 3 1/2 7
10 1/2 14
50.8 110
1 7/8 3 3/4 7 1/2 11 1/4 15
53.8 116
131/32 315/16 7 7/8 1113/16 153/4
56.0 120
11.9
2.3
11.9
23.8
47.6
Type number
21 4. 28 21 5. 28 21 6. 28
25 4. 18 25 5. 18 25 6. 18
29 4. 18 29 5. 18 29 6. 18
20 42 14 20 52 14 20 62 14
Load (Ibs)
750
1498
2997
375
845
1689
3377
423
940
1879
3758
470
1036
2069
4138
518
1131
2259
4519
565
1226
2450
4899
613
1321
2640
5280
661
1417
2830
5660
708
1512
3020
6041
756
1607
3211
6421
804
1702
3401
6802
851
1798
3591
7182
899
1893
3782
7563
946
1988
3972
7944
994
2083
4162
8324
1042
2179
4352
8705
1089
2250
4495
8990
1125
Spring rate c (lbs/inch)
190
381
127
254
507
63.5
190
381
761
95.2
381
761
1522
190
761
1522
3045
381
21 1. 28 21 2. 28 21 3. 28
25 1. 18 25 2. 18 25 3. 18
29 1. 18 29 2. 18 29 3. 18
20 12 14 20 22 14 20 32 14
94
106
117
129
141
153
165
177
189
201
213
225
236
248
260
272
281
23.8
47.6
95.2
187
211
235
259
282
306
330
354
378
401
425
449
473
497
520
544
562
47.6
95.2
190
21 7. 28
25 7. 18
29 7. 18
20 72 14
21 8. 28 21 9. 28
25 8. 18 25 9. 18
29 8. 18 29 9. 18
20 82 14 20 92 14
4497
5068
5639
6210
6781
7352
7923
8494
9065
9636
10207
10778
11349
11920
12491
13062
13490
5995
6756
7518
8279
9040
9801
10563
11324
12085
12846
13608
14369
15130
15892
16653
17414
17985
7493
8445
9396
10348
11299
12251
13203
14154
15106
16057
17009
17960
18912
19863
20815
21766
22480
571
761
1142
2284
4568
761
1015
1522
3045
6090
952
1269
1903
3806
7612
2
DETERMINATION OF THE MOST
FAVORABLE SIZE
1. Selecting the ideal spring hanger
Example:
Example:
Operating load
F = 1512Ibs
Permissible deviation p 25%
Travel (up)
s = 3/4inch
3/
4
Spring hangers type 22. Variable spring hanger type 26, spring supports type 28
Travel range
...3..
...2..
Working travel (inch)
0
0
0
...1..
1/
8
1/
4
3/
8
1/
2
5/
8
3/
4
7/
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
131/32
1/
4
1/
3/
4
1
1 1/4
1 1/2
1 3/4
2
2 1/4
2 1/2
2 3/4
3
3 1/4
3 1/2
3 3/4
315/16
1/
1
1 1/2
2
2 1/2
3
3 1/2
4
4 1/2
5
5 1/2
6
6 1/2
7
7 1/2
7 7/8
22 1. 29
26 1. 19
28 1. 19
11990
13513
15035
16558
18080
19603
21125
22648
24170
25693
27215
28738
30260
31783
33306
34828
35970
3045
6090
12180
Type number
22 2. 29
22 3. 29
22 4. 29
26 2. 19
26 3. 19
26 4. 19
28 2. 19
28 3. 19
28 4. 19
Load (lbs)
14987
17985
22467
16890
20269
25320
18793
22553
28173
20696
24836
31026
22599
27120
33879
24502
29404
36731
26405
31688
39584
28308
33972
42437
30211
36255
45290
32114
38539
48143
34017
40823
50996
35921
43107
53849
37824
45391
56702
39727
47675
59555
41630
49958
62407
43533
52242
65260
44960
53955
67400
Spring rate c (lbs/inch)
3806
4568
5706
7612
9135
11412
15224
18270
22823
type designation
For availability of component type
in the different travel ranges, see
dimension table pages 2.5 to 2.11.
7619
15238
30476
2.4
SPRING HANGER
TYPE 21
Spring hangers
type 21 C2 29 to 21 95 28
Order details:
Spring hanger type 21 .. ..
Marking:
Operating load/Set load: ...lbs
Working travel:
... inch up/down
2.5
Type
21 C2 29
21 D2 29
21 D3 29
21 11 28
21 12 28
21 13 28
21 21 28
21 22 28
21 23 28
21 31 28
21 32 28
21 33 28
21 34 28
21 41 28
21 42 28
21 43 28
21 44 28
21 51 28
21 52 28
21 53 28
21 54 28
21 55 28
21 61 28
21 62 28
21 63 28
21 64 28
21 65 28
21 71 28
21 72 28
21 73 28
21 74 28
21 75 28
21 81 28
21 82 28
21 83 28
21 84 28
21 85 28
21 91 28
21 92 28
21 93 28
21 94 28
21 95 28
A
3
3 1/2
3 1/2
3 1/2
3 1/2
3 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
6
6
6
6
7
7
7
7
7
8 5/8
8 5/8
8 5/8
8 5/8
8 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
10 3/4
10 3/4
10 3/4
10 3/4
10 3/4
d2
B
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
5/
8
5/
8
5/
8
5/
8
7/
8
7/
8
7/
8
7/
8
7/
8
1
1
1
1
1
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
3/
8
3/
8
3/
8
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
5/
8
5/
8
5/
8
5/
8
3/
4
3/
4
3/
4
3/
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
1/
4
1/
4
1/
4
1/
4
1/
4
1/
2
1/
2
1/
2
1/
2
1/
2
3/
4
3/
4
3/
4
3/
4
3/
4
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
E
SW
8
9 7/8
18 3/4
6 1/8
9 7/8
18 3/4
6 1/8
10
18 3/4
6 1/4
10
18 3/4
33 1/8
7 1/4
11 3/8
20 5/8
36 1/4
8 1/2
12
21 1/4
40 3/4
50 1/4
9 5/8
14 1/8
25 1/4
47 1/2
58 5/8
11
16
26 5/8
51 1/8
62
12
18 1/2
33 1/4
56 1/4
71 1/4
13
19 7/8
34 1/4
59 5/8
74 1/4
8
9 3/ 4
18 1/2
5 3/ 4
9 3/ 4
18 1/2
6
9 3/ 4
18
6
9 3/ 4
18 1/2
28 1/2
7
11 1/2
20 3/4
31 1/2
8 1/ 2
12
21 1/4
32 1/2
42
9 3/ 4
14 1/4
25 1/4
38 1/2
49 3/4
11 1/4
16 1/4
26 3/4
42 1/4
53
12 1/2
19
33 3/4
52 1/4
67 1/4
14
20 3/4
35 1/4
55
69 1/2
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.95
0.95
0.95
0.95
1.18
1.18
1.18
1.18
1.42
1.42
1.42
1.42
1.42
1.81
1.81
1.81
1.81
1.81
2.17
2.17
2.17
2.17
2.17
2.56
2.56
2.56
2.56
2.56
2.95
2.95
2.95
2.95
2.95
X
5/
8
5/
8
5/
8
5/
8
5/
8
5/
8
5/
8
5/
8
5/
8
3/
4
3/
4
3/
4
3/
4
1
1
1
1
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
2
2
2
2
2
2 3/8
2 3/8
2 3/8
2 3/8
2 3/8
Weight
(Ibs)
4.2
6.6
11.0
4.6
6.8
12.2
8.4
11.6
19.0
9.4
13.2
21.4
30.8
20.2
28.2
44.0
64.0
36.4
45.2
70.6
101.0
125.0
68.4
88.2
137.0
198.0
251.0
106.0
139.0
196.0
293.0
353.0
128.0
176.0
278.0
400.0
500.0
185.0
245.0
360.0
535.0
650.0
SPRING HANGER
TYPE 22
Spring hangers
type 22 11 29 to 22 53 29
blocking device
Type
A
22 11 29
22 12 29
22 13 29
22 21 29
22 22 29
22 23 29
22 31 29
22 32 29
22 33 29
22 41 29
22 42 29
22 43 29
22 51 29
22 52 29
22 53 29
20 3/4
20 3/4
20 3/4
21 1/2
21 1/2
21 1/2
23 1/4
23 1/4
23 1/4
24 1/2
24 1/2
24 1/2
25 1/2
25 1/2
25 1/2
3 1/8
3 1/8
3 1/8
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 1/2
4 1/2
4 1/2
5 1/2
5 1/2
5 1/2
C
2 3/8
2 3/8
2 3/8
2 3/4
2 3/4
2 3/4
3
3
3
3 1/8
3 1/8
3 1/8
3 1/2
3 1/2
3 1/2
d2
2 1/4
2 1/4
2 1/4
2 1/2
2 1/2
2 1/2
2 3/4
2 3/4
2 3/4
3
3
3
3 1/4
3 1/4
3 1/4
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
d3
E
SW1
SW2
2 3/8
2 3/8
2 3/8
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 1/8
3 1/8
3 1/8
3 1/2
3 1/2
3 1/2
17 1/4
22
33
18 3/4
23 1/2
34 1/2
19 1/4
24
35
21 3/4
27
37 1/2
24 3/4
31 1/2
46 1/4
13 3/4
18 1/2
29 1/2
14 1/2
19 1/4
30 1/4
15 1/4
20
31
17
22
32 3/4
19
25 1/2
40 1/4
3 1/2
3 1/2
3 1/2
4 1/4
4 1/4
4 1/4
4 1/4
4 1/4
4 1/4
4 3/4
4 3/4
4 3/4
5 1/4
5 1/4
5 1/4
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 1/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
3 3/8
3 3/8
3 3/8
3 3/4
3 3/4
3 3/4
4
4
4
4 1/4
4 1/4
4 1/4
4 5/8
4 5/8
4 5/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
2 1/4
2 1/4
2 1/4
2 5/8
2 5/8
2 5/8
2 1/2
2 1/2
2 1/2
3
3
3
3 1/8
3 1/8
3 1/8
3 3/8
3 3/8
3 3/8
3 3/4
3 3/4
3 3/4
Weight
(lbs)
530
600
750
630
710
900
790
890
1120
1000
1140
1380
1210
1440
1910
Order details:
Spring hanger type 22 .. ..
Marking: ....
Operating load/Set load: .... lbs
Working travel:
.... inch up/down
2.6
SPRING HANGER
TYPE 25
Spring hangers (seated)
type 25 D2 19 to 25 93 18
Base plate
Type 72 can be added to
type 25 on request.
Type
72 D9 28
72 19 28
72 29 28
72 39 28
72 49 28
72 59 28
72 69 28
72 79 28
72 89 28
72 99 28
B
47/8
47/8
57/8
57/8
71/2
85/8
101/4
113/8
113/8
133/8
C
33/4
33/4
41/2
41/2
51/2
63/4
77/8
81/2
81/2
10
d6
Type
7/
5/
7/
5/
1/
2
1/
2
11/
3/
1/
1/
11/
1/
7/
8
7/
8
11/
9/
16
16
16
16
16
16
16
13/
16
16
13/
16
11/4
Load group
25 D2 19
25 D3 19
25 11 18
25 12 18
25 13 18
25 21 18
25 22 18
25 23 18
25 31 18
25 32 18
25 33 18
25 41 18
25 42 18
25 43 18
25 51 18
25 52 18
25 53 18
25 61 18
25 62 18
25 63 18
25 71 18
25 72 18
25 73 18
25 81 18
25 82 18
25 83 18
25 91 18
25 92 18
25 93 18
A
3 1/2
3 1/2
3 1/2
3 1/2
3 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
6
6
6
7
7
7
8 5/8
8 5/8
8 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
10 3/4
10 3/4
10 3/4
B
13
26
8
13
26
8
14
26
8
14
26
9
15
28
10
16
29
11
18
33
13
20
35
15
23
42
16
25
43
d2
3/
4
1/
2
3/
8
3/
8
1/
3/
4
1/
2
1/
2
2
1/
1/
1/
1/
4
1/
4
1/
2
5/
8
5/
1/
2
1/
2
3/
4
1/
2
1/
4
3/
4
1/
4
1/
4
3/
4
3/
4
1/
2
1/
4
3/
4
1/
4
1/
4
1/
2
3/
4
5/
8
3/
4
3/
4
3/
4
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
1 3/4
2
2
2
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
d4
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
3/
4
3/
4
3/
4
1
1
1
1 1/8
1 1/8
1 1/8
1 3/8
1 3/8
1 3/8
1 5/8
1 5/8
1 5/8
1 7/8
1 7/8
1 7/8
2 1/8
2 1/8
2 1/8
H
9 3/4
18 1/2
5 3/4
9 3/4
18 1/2
6
9 3/4
18
6
9 3/4
18 1/2
7
11 1/2
20 3/4
8 1/2
12
21 1/4
9 3/4
14 1/4
25 1/4
11 3/4
17
27 1/2
13 1/4
19 3/4
34 1/2
14 1/2
21 1/2
35 3/4
X max
15
27 3/4
9
15
27 3/4
9 1/4
15 1/4
27 1/4
9 3/4
15 1/2
28 1/4
11
17 1/2
30 3/4
12 3/4
18 1/4
31 1/2
14 3/4
21 1/4
36 1/4
17 1/4
24 1/2
39
19 1/2
28 1/4
46 3/4
21
30
48 1/2
Weight
(lbs)
6.2
10.8
4.6
6.8
12.2
7.8
11.2
18.6
8.2
11.6
19.6
17.6
25.4
41.0
32.0
40.0
64.0
58.0
78.0
124.0
88.0
116.0
174.0
98.0
146.0
244.0
148.0
202.0
316.0
Order details:
Spring hanger type 25 .. ..
Marking: ..
Operating load/Set load: ...lbs
Working travel:
... inch up/down
2.7
SPRING HANGER
TYPE 26
Type
A
B
26 11 19
26 12 19
26 13 19
26 21 19
26 22 19
26 23 19
26 31 19
26 32 19
26 33 19
26 41 19
26 42 19
26 43 19
26 51 19
26 52 19
26 53 19
20
20
20
22
22
22
24
24
24
24
24
24
24
24
24
15 1/2
22 1/4
37 1/4
16
22 3/4
37 1/2
16 1/2
23 1/4
38 1/4
18 1/2
25 1/2
40 1/4
20 3/4
29 1/2
48
d2
2 1/4
2 1/4
2 1/4
2 1/2
2 1/2
2 1/2
2 3/4
2 3/4
2 3/4
3
3
3
3 1/4
3 1/4
3 1/4
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
d4
2 3/8
2 3/8
2 3/8
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
2 3/4
3 1/8
3 1/8
3 1/8
3 1/2
3 1/2
3 1/2
SW
X max
13 1/2
18 1/4
29 1/4
14
18 3/4
29 3/4
14 1/2
19 1/4
30 1/4
16 1/2
21 3/4
32 1/2
19
25 1/2
40 1/4
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
2 1/4
2 1/4
2 1/4
2 5/8
2 5/8
2 5/8
20 3/4
27 1/2
42 1/2
22
28 3/4
43 3/4
23
29 3/4
44 3/4
25 1/2
32 1/2
47 1/4
28 1/2
37 1/4
55 3/4
Weight
(lbs)
450
520
680
580
660
860
760
860
1080
870
990
1220
1030
1200
1600
Order details:
Spring hanger type 26 .. ..
Marking: ..
Operating load/Set load: ...lbs
Working travel:
... inch up/down
2.8
SPRING SUPPORT
TYPE 29
Spring supports
type 29 C2 19 to 29 93 18
L1
Type
Load group
70 19 16 C, D, 1
70 39 16 2, 3
70 49 16 4
70 59 16 5
70 69 16 6
70 79 16 7
70 89 16 8
70 99 16 9
L1
1 5/ 8
15/8
21 / 2
21 / 2
43 / 8
43 / 8
57 / 8
57 / 8
Type 29 .9 15 - E
Load group
Type
29 C2 19
29 D1 19
29 D2 19
29 D3 19
29 11 18
29 12 18
29 13 18
29 21 18
29 22 18
29 23 18
29 31 18
29 32 18
29 33 18
29 41 18
29 42 18
29 43 18
29 51 18
29 52 18
29 53 18
29 61 18
29 62 18
29 63 18
29 71 18
29 72 18
29 73 18
29 81 18
29 82 18
29 83 18
29 91 18
29 92 18
29 93 18
A
B
C
d6
3
3 1/2
3 1/2
3 1/2
3 1/2
3 1/2
3 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
6
6
6
7
7
7
8 5/8
8 5/8
8 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
9 5/8
10 3/4
10 3/4
10 3/4
4 1/8
4 7/8
4 7/8
4 7/8
4 7/8
4 7/8
4 7/8
5 7/8
5 7/8
5 7/8
5 7/8
5 7/8
5 7/8
7 1/2
7 1/2
7 1/2
8 5/8
8 5/8
8 5/8
10 1/4
10 1/4
10 1/4
11 3/8
11 3/8
11 3/8
11 3/8
11 3/8
11 3/8
13 3/8
13 3/8
13 3/8
3
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
3 3/4
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
5 1/2
5 1/2
5 1/2
6 3/4
6 3/4
6 3/4
7 7/8
7 7/8
7 7/8
8 1/2
8 1/2
8 1/2
8 1/2
8 1/2
8 1/2
10
10
10
3/
8
7/
16
7/
16
7/
16
7/
16
7/
16
7/
16
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
11/
16
11/
16
11/
16
11/
16
11/
16
11/
16
7/
8
7/
8
7/
8
7/
8
7/
8
7/
8
1 1/16
1 1/16
1 1/16
1 1/4
1 1/4
1 1/4
2.9
E
10 3/4
7 3/4
12
21 3/4
7 3/4
12
21 3/4
7 3/4
12 1/4
21 1/4
8
12 1/4
21 3/4
9 1/2
14 1/4
24 1/4
10 3/4
14 1/2
24 1/2
12
17
28 3/4
14 1/4
19 3/4
31
15 3/4
22 3/4
38
17 1/4
24 1/2
39 3/4
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 7/8
1 7/8
1 7/8
2
2
2
2
2
2
2
2
2
2 1/8
2 1/8
2 1/8
2 3/8
2 3/8
2 3/8
8 1/4
5 3/4
9 3/4
18 1/2
5 3/4
9 3/4
18 1/2
6
9 3/4
18
6
9 3/4
18 1/2
7
11 1/2
20 3/4
8 1/4
11 3/4
21
9 3/4
14 1/4
25 1/4
11 3/4
16 3/4
27 1/4
13 1/4
19 3/4
34 1/4
14 1/2
21 1/2
35 3/4
D
3 1/4
3 1/4
3 1/4
3 1/4
3 1/4
3 1/4
3 1/4
4
4
4
4
4
4
4 3/4
4 3/4
4 3/4
6
6
6
6 3/4
6 3/4
6 3/4
7 3/4
7 3/4
7 3/4
7 3/4
7 3/4
7 3/4
9 1/2
9 1/2
9 1/2
S
1/
4
5/
16
5/
16
5/
16
5/
16
5/
16
5/
16
3/
8
3/
8
3/
8
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
1/
2
9/
16
9/
16
9/
16
13/
16
13/
16
13/
16
13/
16
13/
16
13/
16
1
1
1
Weight
(lbs)
5.8
7.0
9.4
14.6
7.4
10.2
15.8
12.4
16.8
24.4
13.8
18.6
28.6
26.2
35.2
55.2
44.0
54.0
82.0
74.0
98.0
150.0
116.0
150.0
214.0
132.0
186.0
294.0
200.0
260.0
382.0
SPRING SUPPORT
TYPE 28
Spring supports
type 28 11 19 to 28 53 19
blocking device
Type
A
B
C
d6
E
28 11 19
28 12 19
28 13 19
28 21 19
28 22 19
28 23 19
28 31 19
28 32 19
28 33 19
28 41 19
28 42 19
28 43 19
28 51 19
28 52 19
28 53 19
20
20
20
22
22
22
24
24
24
24
24
24
24
24
24
20 3/4
20 3/4
20 3/4
22 3/4
22 3/4
22 3/4
24 3/4
24 3/4
24 3/4
24 3/4
24 3/4
24 3/4
24 3/4
24 3/4
24 3/4
17 1/4
17 1/4
17 1/4
19 1/4
19 1/4
19 1/4
20 3/4
20 3/4
20 3/4
20 3/4
20 3/4
20 3/4
20 3/4
20 3/4
20 3/4
16 1/2
16 1/2
16 1/2
16 1/2
16 1/2
16 1/2
17 3/4
17 3/4
17 3/4
17 3/4
17 3/4
17 3/4
19
19
19
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
16
21
32 3/4
17 3/4
23
34 3/4
18
23 1/2
35
20
27
42 1/4
22
29 1/2
44 3/4
2 3/8
2 3/8
2 3/8
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 3/4
2 3/4
2 3/4
3
3
3
13
17 3/4
28 3/4
14 1/2
19 3/4
30 1/2
15
20
31
16 3/4
23 1/2
38
18 3/4
25 3/4
40 1/4
1
1
1
1
1
1
1
1
1
1 3/16
1 3/16
1 3/16
1 3/8
1 3/8
1 3/8
SW
1 7/ 8
1 7/ 8
1 7/ 8
1 7/ 8
1 7/ 8
1 7/ 8
1 7/ 8
1 7/ 8
1 7/ 8
2 1/ 4
2 1/ 4
2 1/ 4
2 5/ 8
2 5/ 8
2 5/ 8
Weight
(lbs)
510
575
795
685
770
1015
840
950
1220
970
1150
1630
1090
1280
1730
Application in practice
Order details:
Spring support type 28 .. ..
Marking: ..
Operating load/Set load: ...lbs
Working travel:
... inch up/down
2.10
weld-on bracket
Connection type
Order details:
Angulating spring support
type 20 .. .. with 2 weld-on
brackets 35 .. ..
Marking: ..
Operating load/Set load: ...lbs
Working travel:
... inch up/down
Type
A
d3
E
20 D2 19
20 12 14
20 22 14
20 32 14
20 42 14
20 52 14
20 62 14
20 72 14
20 82 14
20 92 14
3 1/ 2
3 1/ 2
4 1/ 2
4 1/ 2
6
7
8 5/ 8
9 5/ 8
9 5/ 8
10 3/4
0.393
0.393
0.472
0.590
0.590
0.787
0.787
1.181
1.181
1.968
14 1/2
14 1/2
15
15 1/2
17 1/4
18 1/2
21
25 1/2
29
32
1 3/4
1 3/4
2
2 1/4
2 1/4
2 1/2
2 1/2
3 7/8
3 7/8
5 1/8
G
5/
8
5/
8
3/
7/
8
7/
8
1 1/
1 1/4
2
2
2 1/2
SG
10 1/4
10 1/4
10 1/4
10 1/4
11 3/4
12 1/2
14 1/2
17
20
21 3/4
5/
5/
3/
7/
7/
1 1/8
1 1/8
1 3/4
1 3/4
2 3/8
0.36
0.36
0.40
0.48
0.48
0.63
0.63
0.87
0.87
1.38
+31/2
-11/2
L 11/2
+2
Order details:
Extension for angulating
spring support
type 20 .9 ..
L=...inch
2.11
Type
A+2
D
d3
20 D9 19
20 19 14
20 29 14
20 39 14
20 49 14
20 59 14
20 69 14
20 79 14
20 89 14
20 99 14
12 3/4
12 3/4
13
13 1/8
15
16
18 1/2
21 5/8
25
27
1 5/ 8
1 5/ 8
1 7/ 8
2 3/ 8
2 3/ 8
3
3
3 1/ 2
3 1/ 2
4
0.393
0.393
0.472
0.590
0.590
0.787
0.787
1.181
1.181
1.968
+ 31/2
- 11/2
min
20 5/8
20 5/8
21 1/8
21 5/8
23 1/2
26 5/8
29 1/8
32 7/8
36 1/4
40
+ 31/2
- 11/2
max
48
48
57 5/8
57 1/2
57 1/2
76 7/8
76 3/4
75 3/4
95 1/2
94 7/8
L 11/2
min
7 7/8
7 7/8
8 1/8
8 1/2
8 1/2
10 5/8
10 5/8
11 1/4
11 1/4
13
L 11/2
max
35 1/4
35 1/4
44 5/8
44 3/8
42 1/2
60 7/8
58 1/4
54 1/8
70 1/2
67 7/8
tube
weight
at Lmin (lbs)
(lbs/inch)
0.21
2.4
0.21
2.4
0.25
2.8
0.47
5.6
0.47
5.6
0.82
17.6
0.82
17.6
1.18
23.4
1.18
23.4
1.71
36.4
-2
E at travel range
1
2
3
15 1/4 24
67
11 1/2 15 1/4 24 1/4
67
11 1/2 15 1/2 24 1/4
67
1/
1
1
/
12
35 2
2 16 /4 25
70 3/4 12
15 3/4 24 1/2
13 3/4 18
55
27 1/4
3
3
70 /4 13 /4 18
27 1/4
1/
1
/
16
49 4
29 1/4
4 20
19 1/2 28 3/4
70 3/4 16
49 1/4 18
22 3/4 33 3/4
1
1
94 /2 17 /2 22
33
70 3/4 20 1/2 25 1/2 36
94 1/2 20 1/4 25 1/4 35 3/4
47 1/4 22 3/4 29 1/4 44
78 3/4 22 3/4 29 1/4 44
70 3/4 24 3/4 31 3/4 46
L max
4
4
4
4
6
6
6
6
8
8
10 1/4
10 1/4
12
10 1/4
12
12
3 1/2
3 1/2
4 1/2
4 1/2
4 1/2
6
6
7
7
8 5/8
8 5/8
9 5/8
9 5/8
9 5/8
9 5/8
10 3/4
5 1/ 2
5 1/ 2
5 1/ 2
5 1/ 2
7 1/ 2
7 1/ 2
8 1/ 8
8 1/ 8
9 1/ 2
9 7/ 8
13
13
13 3/4
13
13 3/4
14
Trapeze
Type
79 D. 21
79 1. 21
79 2. 21
79 3. 21
79 4. 21
79 5. 21
79 6. 21
79 7. 21
79 8. 21
79 9. 21
Nominal load
(1000 lbs)
0.24
0.56
1.12
2.25
4.50
8.99
17.98
26.98
35.97
44.96
X
5/
8
5/
8
5/
8
3/
4
3/
4
1
1
1 1/8
1 1/8
1 3/8
1 3/8
1 3/4
1 3/4
2
2
2 3/8
1
61
69
72
98
122
138
175
227
307
395
480
530
545
590
835
2
3
64 73
66 76
75 90
79 96
105 122
138 170
154 186
192 243
244 295
346 444
434 532
550 660
595 710
640 845
690 890
955 1185
1.20
1.20
1.20
1.20
1.74
1.74
2.00
2.00
3.12
3.12
4.74
4.74
5.15
4.74
5.15
7.50
d2
3/
UNC
1/
2 UNC
1/
2 UNC
5/
8 UNC
3/
4 UNC
1 UNC
1 1/4 UNC
1 1/2 UNC
1 3/4 UNC
2 UNC
8
L max
55
55
63
63
69
82 3/4
82 3/4
82 3/4
84 3/4
86 1/2
B max
4
4
4 1/ 4
4 1/ 4
5
6 3/ 8
8 1/ 4
9 1/ 2
10 1/4
11
39
53
55
85
142
231
340
393
532
2
35
43
59
62
101
159
270
405
489
652
3
44
54
74
79
133
210
368
520
693
882
Order details:
Trapeze, type 79 .. 29
L= inch
Spring Hanger trapezes
type 79 .. 21
travel
E dimension
range
approx.
1
1 1/4 inch
2
2 1/4 inch
3
4 1/4 inch
Notes ... see above
per inch
(lbs)
0.7
0.9
1.1
1.1
1.5
2.4
3.4
4.8
5.2
6.4
Order details:
Trapeze type 79 .. 21
L= inch
2.12
SWAY BRACE
TYPE 27
Sway brace
type 27 D2 19 to 27 62 19
Maximum working travel
1 inch including free stroke
11/2
Weld-on bracket
Load adjustment
Min. thread engagement
Free stroke
adjustment
Type
27 D2 19
27 12 19
27 22 19
27 32 19
27 42 19
27 52 19
27 62 19
27
117
93
281
562 187
1125 374
2250 749
4495 1498
8990 2997
94
233
467
935
1872
3745
7492
3 1/2
3 1/2
4 1/2
4 1/2
6
7
8 5/8
23
47
95
190
380
761
1522
3 1/ 2
3 1/ 2
3 1/ 2
3 1/ 2
3 1/ 2
3 7/ 8
3 7/ 8
0.393
0.393
0.472
0.590
0.590
0.787
0.787
25 1/4
25 1/4
25 1/2
26 1/4
28 3/4
32
34 1/2
F
2
2
2
2 1/4
2 1/4
3
3
SG
11 5/8 5/8
11 5/8 5/8
11 7/8 3/4
7/
12
8
7/
14
8
15 1 1/8
17 1/2 1 1/8
0.36
0.36
0.40
0.48
0.48
0.63
0.63
35 29 13
35 29 13
35 39 13
35 49 13
35 49 13
35 59 19
35 59 19
12
12
22
24
50
86
136
3
1 /2
1
11/2
Order details:
Extension for sway brace
type 27 .9 19
L-dim.: ...... inch
2.13
Type
27 D9 19
27 19 19
27 29 19
27 39 19
27 49 19
27 59 19
27 69 19
A 11/2
23 1/4
23 1/4
23 5/8
24
26 5/8
28 7/8
31 1/2
D
1 5/8
1 5/8
1 7/8
2 3/8
2 3/8
3
3
d3
0.393
0.393
0.472
0.590
0.590
0.787
0.787
E3
min max
31 1/8 63
31 1/8 63
31 3/4 78 3/4
32 1/2 78 3/4
35 1/8 78 3/4
39 1/2 94 3/8
42 1/8 94 1/2
L 11/2
min max
7 7/8 39 3/4
7 7/8 39 3/4
8 1/8 55 1/8
8 1/2 54 3/4
8 1/2 52 1/8
10 5/8 65 1/2
10 5/8 63
Weight
at Lmin (lbs) tube (lbs/inch)
0.21
2.4
0.21
2.4
0.25
2.8
0.47
5.6
0.47
5.6
0.82
17.6
0.82
17.6
2
Function diagram
travel scale
lower ball bushing joint
travel (inch)
Load and installation length are
adjustable to the corresponding
specifications.
compressive force
neutral position
tensile force
2.14
INSTALLATION AND
OPERATING INSTRUCTIONS
Spring hangers and supports are used to compensate for the thermal movement to be expected in
piping systems. For
trouble-free functioning,
correct installation is
essential, observing the
following instructions:
Fixing bolt
2.15
2
upper connection
travel scale
blocking unit with securing band
name plate
lower connection (turnbuckle
with right-hand thread)
counter nut
2.16
Case 1
Attachment rods vertical during
plant operation
cold position
hot position
Case 2
Attachment rods vertical in
installation condition
2.17
2
5. Load readjustment
5.1 Spring hangers, spring supports
For spring hangers the load can be readjusted
by loosening or tightening the threaded rods
at the lock nut. For spring supports, the load
can be readjusted by a corresponding adjustment of the load tube.
Under all circumstances, however, the appropriate technical department must be consulted
before attempting any load readjustment.
B
connecting rod
counter nut
lock nut
load tube
travel stop
travel scale
name plate
Hydraulic
cylinder
Hydraulic
cylinder
Hydraulic cylinder
Example of an arrangement
with type 25
2.18
3
PRODUCT
GROUP
PAGE
3
0
Field of application________________________________________________3.1
Main products ____________________________________________________3.2
PRODUCT
GROUP
8
9
3.0
PRODUCT GROUP 3
FIELD OF APPLICATION
To avoid unacceptable tension and moments in the
piping system, unplanned
displacement in piping or
other plant components must
be eliminated. However, thermal movement must not be
hindered in any way!
Dynamic events
Whenever unplanned dynamic events occur,
LISEGA Product Group 3 supports have the
job of protecting the piping or other components affected from any damage.
Undesirable abrupt movement of the components in the system can be caused by:
wind load
seismic events
aircraft impact
explosions
piping
pumps
valve assemblies
pressure vessels
steam generators
A comprehensive selection of connection possibilities is available for the correct installation of the main products:
installation extensions, type 33
weld-on brackets, type 35
dynamic pipe clamps, types 36 and 37
In accordance with the LISEGA modular
system, the connecting parts are designed
to be compatible and are subject to uniform
calculation criteria. A generally applicable
table of permissible loads can be found on
page 0.5 of the Technical Specifications.
The fundamental calculation procedures
comply with international regulations and
standards and are certified by practical type
and suitability tests.
Design Report Summaries in accordance
with ASME III NF are available.
3.1
PRODUCT GROUP 3
MAIN PRODUCTS
free stroke
(adjustable)
rigid
3.2
PRODUCT GROUP 3
RECOMMENDATIONS FOR USE
Product Group 3 components are dynamically
stressed. In their use, the following points
must be observed for effective functioning:
1. Where the design of dynamically fixed
points is concerned, the stiffness of the
supporting system as a whole, i.e. of all
components in the support chain, must be
considered.
2. In the selection of unit sizes, the total of
all loadings avising must be taken into
account.
3. For given loads it must be made clear,
beyond any doubt, which level of design load
(H, HZ, HS, and/or Level A,B,C,D) the data
corresponds to. The table of permissible loads
on page 0.5 of the Technical Specifications
must be observed.
4. The stroke length of shock absorbers
should not be fully exploited. An overtravel
safety margin of 3/8 inch [10mm] at each
end of the snubber should be maintained.
5. When arranging the components, sufficient
lateral freedom should be allowed so that
there is no jamming at connection lugs.
6. When shock absorbers are arranged in
parallel, it is recommended that load reserves be considered. Instead of 50%, in
each case it is recommended that both
shock absorbers be designed to take 70%
of the total calculation load.
Type 35
Type 35
Type 33
Type 37
Type 30
Type 39
Type 30
Type 33
Type 35
Type 35
Type 36
Type 39
Type 36
Type 39
Type 36
Type 30
Type 35
Type 35
Type 35
Type 30
Type 39
Type 36
Type 35
Type 30
3.3
Type 35
Type 39
Type 37
Type 39
Type 35
SHOCK ABSORBERS
TYPE 30, 31
LISEGA shock absorbers have stood the test
of time in practical applications for over
three decades, and thereby proven their
outstanding reliability. Extensive operational
experience has, through constant further
development, led to a matured product, universally respected and leading worldwide.
Access to shock absorbers after installation is
generally difficult and, because of possible
danger from radiation when installed in
nuclear power plants, involves stringent
safety regulations for personnel. The highest
demands are therefore made on reliable and
maintenance-free continuous service.
For the reliable operational safety of shock
absorbers, the quality of the following critical
components, together with the functional principle and whole design, is a decisive factor:
sealing systems
piston and rod guides
hydraulic fluid
sliding surfaces
corrosion-resistant interiors
control valve system
The following qualities have led to the recognized superiority of LISEGA shock absorbers:
non-corroding materials
special sealing systems
vibration proof guide systems
pressurized self-contained hydraulic system
dynamic function
exchangeable control valves (Type 31)
23 years approved maintenance-free
operation
40 year lifespan
certified by ASME - NCA 3800
certified by TV qualification
testing
3.4
SHOCK ABSORBERS
TYPE 30
Type 30 18 16 to 30 03 12
Series produced
Standard design
Available from stock or
from running production.
Only non-corroding materials are used. Connection
lugs (material = carbon
steel) attached via threaded
connections are galvanized.
travel indicator
conn. lug
sight glass
name plate
ball bush
Type
30 18 16
30 38 16
30 39 16
30 42 16
30 43 16
30 52 13
30 53 13
30 62 16
30 63 16
30 72 16
30 73 16
30 82 16
30 83 16
30 92 13
30 93 13
30 02 12
30 03 12
Order details:
Shock absorber
type 30 .. ..
With two weld-on brackets
type 35 .. ..,
Marking:
3.5
Stroke
4
4
8
5 7/8
11 3/4
5 7/8
11 3/4
5 7/8
11 3/4
5 7/8
11 3/4
5 7/8
11 3/4
5 7/8
11 3/4
5 7/8
11 3/4
D
d3
2 1/8
2 3/4
2 3/4
3 3/8
3 3/8
5 5/16
5 5/16
611/16
611/16
7 7/8
7 7/8
10 5/8
10 5/8
11 3/4
11 3/4
15 3/8
15 3/8
0.393
0.472
0.472
0.590
0.590
0.787
0.787
1.181
1.181
1.968
1.968
2.361
2.361
2.755
2.755
3.936
3.936
E
min
8 5/8
12 3/8
16 1/8
15 1/2
21 1/2
17 1/2
23 1/2
21 1/16
27
24 3/16
30 1/8
28 3/4
34 5/8
30
35 7/8
36 7/8
42 3/4
E
max
12 5/8
16 3/8
24 1/8
21 3/8
33 1/4
23 3/8
35 1/4
2615/16
38 3/4
30 1/16
41 7/8
34 5/8
46 3/8
35 7/8
47 5/8
42 3/4
54 1/2
F
11/
16
2
2
2 5/16
2 5/16
2 9/16
2 9/16
3 15/16
3 15/16
5 1/ 8
5 1/ 8
6 1/ 2
6 1/ 2
6 1/ 2
6 1/ 2
9 1/ 2
9 1/ 2
R
9/
16
13/
16
13/
16
7/
8
7/
8
1 3/16
1 3/16
1 3/4
1 3/4
2 3/8
2 3/8
2 15/16
2 15/16
4 1/8
4 1/8
5 3/4
5 3/4
SG
0.36
0.40
0.40
0.48
0.48
0.63
0.63
0.87
0.87
1.38
1.38
1.74
1.74
1.93
1.93
2.76
2.76
Weight
(lbs )
4
10
13
18
26
44
64
82
112
135
175
270
325
385
460
860
1015
SHOCK ABSORBERS
TYPE 31
Shock absorbers
Type 31 98 16 to 31 58 16
conn. lug
ball bush
travel indicator
name plate
removable valves
weld-on bracket
fluid level indicator
Type
31 98 16
31 99 16
31 08 16
31 09 16
31 28 16
31 38 16
31 48 16
31 58 16
Nom. load
(lbs)
123500
123500
224000
224000
448000
670000
900000
1124000
Emergency
Level C Stroke D
9 7/16
4
165000
9 7/16
8
165000
4 13
300000
8 13
300000
4 17 5/16
597000
4 21 1/4
898000
4 22 7/8
1195000
4 243/4
1495000
E
d3 min
2.755 24 3/8
2.755 28 7/8
3.936 30 1/8
3.936 34 5/8
4.723 34 1/4
5.511 40 1/8
6.299 41 1/4
7.086 45
E
max
28 3/8
36 7/8
34 1/8
42 5/8
38 1/4
44 1/8
45 1/4
49
3 3/4 3 9/16
3 3/4 3 9/16
4 3/4 4 5/16
4 3/4 4 5/16
6 5/16 6 1/8
7 1/2 7 1/16
8 1/ 8 7 7/ 8
9 1/ 8 8 5/ 8
L max. R
SG Weight
(lbs)
1.93 335
1.93 400
2.76 630
2.76 745
3.35 1430
3.55 2135
4.14 2870
4.14 3860
Order details:
Shock absorber,
type 31 .. ..
With two weld-on brackets
type 35 .. ..
Marking:
3.6
INSTALLATION EXTENSIONS
TYPE 33
Installation extensions
type 33 18 18 to 33 03 12
Type 33 extensions are used
to bridge larger installation
lengths, thus avoiding structural adjustments on site.
Connection to the shock
absorber or energy absorber
is made at the cylinder
base. Standard threaded
connections allow the
simple substitution of extensions for standard connection lugs. The same applies
for special connections,
helpful when exchanging
units made by other manufacturers, because this way
existing structural connections can remain
(see page 3.8).
extension tube
countering ring
Material:
Extension tube and
countering ring
Carbon steel.
L 11/2
Type
Order details:
Installation extension
type 33 .. ..
L= inch
for hydr. shock absorber
3.7
33 18 18
33 38 18
33 39 18
33 42 18
33 43 18
33 52 13
33 53 13
33 62 18
33 63 18
33 72 18
33 73 18
Nom. load
(lbs)
675
1800
1800
4000
4000
10350
10350
22450
22450
44900
44900
33 82 18
78600
33 83 18
78600
33 92 13
33 93 13
33 02 12
33 03 12
123500
123500
224000
224000
Shock
abs.
stroke
4
4
8
5 7/8
11 3/4
5 7/8
11 3/4
5 7/8
11 3/4
5 7/8
11 3/4
A
9 1/2
123/8
181/8
161/4
25
177/8
263/4
201/8
29
22
307/8
d3
0.393
0.472
0.472
0.590
0.590
0.787
0.787
1.181
1.181
1.968
1.968
2.361
5 7/8
11 3/4
5 7/8
11 3/4
2.755
2.755
3.936
3.936
Piston at midposition
263/8
351/4
303/8
391/8
D
max
1
1 1/4
1 1/4
1 3/8
1 3/8
1 7/8
1 7/8
2 1/2
2 1/2
3 1/4
3 1/4
3 1/2
4
3 1/2
4
4 1/2
4 1/2
6 1/4
6 1/4
E
min
17 1/2
20
25 3/4
24 1/4
33
26 1/2
35 3/8
30 7/8
39 3/4
34 1/2
43 3/8
40 5/8
67 1/2
49 3/8
69
43 3/4
52 5/8
52 1/4
61
E
max
30
30
27 1/4
46 1/4
40 5/8
55 1/4
50 3/8
76 3/4
72 7/8
95
84 1/4
67 3/8
94 1/2
68 7/8
91 3/8
113
110
104 3/8
100 3/8
L 11/2
min
8
7 5/8
7 5/8
8
8
8 5/8
8 5/8
10 3/4
10 3/4
12 1/2
12 1/2
15 3/8
42 1/4
15 3/8
35
17 3/8
17 3/8
21 7/8
21 7/8
L 11/2
max
20 1/2
17 5/8
9 1/8
30
15 5/8
37 3/8
23 5/8
56 5/8
43 7/8
73
53 3/8
42 1/8
69 1/4
34 7/8
57 3/8
86 5/8
74 3/4
74
61 1/4
Weight (lbs)
+ per
L min
1
0.22
1.0
0.31
1.3
0.31
1.3
0.42
2.0
0.42
2.0
0.41
3.3
0.41
3.3
1.10
5.0
1.10
5.0
2.00
11.0
2.00
11.0
1.90
22.0
2.65
99.0
1.90
22.0
2.65
80.0
3.10
73.0
3.10
73.0
5.35
200.0
5.35
200.0
WELD-ON BRACKETS
TYPE 35
Weld-on brackets
Type 35 19 13 to 35 20 19
Type
35 19 13
35 29 13
35 39 13
35 49 13
35 59 19
35 69 19
35 79 19
35 89 19
35 99 11
35 09 13
35 20 19
Nom. load
(lbs)
675
900
1800
4000
10350
22450
44900
78600
123500
224000
448000
1
1
1 3/16
1 3/8
2 1/8
3 9/16
4 5/16
5 7/8
7
15 3/8
20 1/2
1 1/4
1 1/4
1 7/16
111/16
2 1/8
3 1/8
315/16
5 1/8
9
12 3/16
12 5/8
C
7/
16
7/
16
1/
2
1/
2
9/
16
7/
8
15/
16
1 3/8
1 1/2
2 5/16
2 9/16
d3
0.393
0.393
0.472
0.590
0.787
1.181
1.968
2.361
2.755
3.936
4.723
1 3/16
1 3/16
1 5/16
1 9/16
2
2 15/16
3 9/16
4 1/2
6 1/8
8 3/8
9 5/8
F
3/
8
3/
8
7/
16
1/
2
5/
8
7/
8
3/
8
3/
4
1
1
2
2 13/16
3 7/16
1 5/8
1 5/8
1 13/16
2 1/16
2 9/16
3 3/4
4 1/2
6 1/4
8 9/16
11 15/16
12 5/8
1/
2
1/
2
9/
16
11/
16
1 1/16
1 3/4
2 3/16
2 15/16
3 1/8
3 15/16
5 5/16
Weight
(lbs)
0.4
0.4
0.7
1.0
2.0
8.0
17.0
37.0
90.0
291.0
475.0
Pin dia.
Order details:
Weld-on bracket,
type 35 .. ..
SPECIAL CONNECTIONS
It is a well known fact that most earlier
generation shock absorbers do not fulfill
current demands and specifications.
The result is failure, and huge maintenance
costs. Considerable savings can be made by
replacing these units with LISEGA shock or
energy absorbers (E-bars).
So that connections already existing on site
can still be used, a range of special connections is available.
Special lugs
Standard extension
3.8
Type 30
travel range 8,
2. 9
0.236 [6mm]
0.02 [0.5mm]
Type 31
travel range 3
(stroke 113/4)
travel range 8
(stroke 4)
travel range 9
(stroke 8)
0.315 [8mm]
0.393 [10mm]
0.472 [12mm]
Lockup velocity at Rt
Frictional resistance
0.015FN or 67lbs
0.01FN
duration, max. 1h) piston rod travel may be increased by up to 50% due to
reduced fluid viscosity.
Force F
(lbs)
Ffaulted
22450
Femergency
FN
rigidity
10350
stroke
= 113/4
piston travel S
4000
1800
-FN
stroke
8
-Femergency
675
-Ffaulted
3.9
permanent
Relative humidity
at 50 - 302F [10-150C]
100%
X=1
Energy dose
accumulated
continuous
short term
Ambient pressure
Hydraulic fluid
(silicone oil)
Pour point
58F [-50C]
Flash point
572F [300C]
Ignition point
932F [500C]
Resistance to fatigue
Proof of operational durability is based
on the following accumulated load
spectrum:
Normal load FN . . . . . .Load cycles
10 % . . . . . . . . . . . . .2,000,000
50 % . . . . . . . . . . . . . .100,000
80 % . . . . . . . . . . . . . . .20,000
100 % (Level A/B) . . . . . . . . .10,000
133 % (Level C) . . . . . . . . . . .100
172 % (LeveI D) . . . . . . . . . . . .10
The number of cycles corresponds to
estimated maximum dynamic stresses
from diverse load events within a period
of forty years. It also complies with the
test program requirements of the suitability tests conducted by the German
TV. The results prove that the shock
3.10
SHOCK ABSORBERS
MODE OF OPERATION
Function scheme of a shock absorber, type 30
MODE OF FUNCTION
Dynamic event
In the event of a sudden shock, an instantaneous, secure and almost rigid connection
is produced between the supported component and the fixed point on the structure.
The resulting dynamic loads are at once
conducted into the structural connection and
dissipated without any harmful consequences.
Normal operational movements of piping and
other components remain however unhindered.
Moments of force can often change direction
at random within the framework of complex
oscillation spectra. The response frequency
range for LISEGA shock absorbers is 0.5 100 Hz.
C D
spring pressure, and hydraulic fluid flows freely from one side of the piston to the other.
During rapid piston movement (approx.
4.72 inch/min [2mm/s]) above the speed
limit, the resulting fluid flow pressure on the
valve plate closes the main valve. The flow
of the hydraulic fluid is stopped and movement blocked. The compressibility of the
fluid cushion has a softening effect on the
restriction of the piston. This prevents
damaging load spikes.
For movement in the compressive direction,
the compensating valve (D) closes almost
synchronously with the main valve.
If the pressure on the closed valve subsides,
e.g. through reversal of the direction of movement, the main control valve opens automatically when the fluid force falls short of the
spring force.
FUNCTION
Control valves
The function of LISEGA hydraulic shock absorbers type 30 is controlled by the main control valve (B), axially mounted within the
hydraulic piston (A).
During the piston movement ( 4.72
inch/min [2mm/s]) the valve is kept open by
3.11
Bypass
To prevent the valves from jamming in the
blocking position, they are fitted with a
bypass system.
3
Function scheme of a shock absorber type 31
3.12
SHOCK ABSORBERS
DESIGN CHARACTERISTICS
Design characteristics
The shock absorbers are closed systems
with no external threaded pressure
connections. Individual parts of the unit
are assembled without welding by
means of precision fits and threaded
connections and secured mechanically
(see Fig. 3).
For protection against corrosion, LISEGA shock absorbers are made exclusively from non-corroding materials. The
connections are made of galvanized
carbon steel.
The guides on piston rods and pistons
are made from a special wear-resistant
non-metallic material (see Fig. 2).
The fluid reservoir is sealed from the
atmosphere by a preset piston, so that
slight overpressure in the hydraulic
system constantly maintains a slight
presetting of the seals.
The control valves are decisive for the
dynamic operation of the shock absorber.
To achieve high operational accuracy,
the valve parameters have been optimized by extensive testing and special
calculation models.
Seals
The sealing systems play a vital role in
the long term function of a hydraulic
shock absorber. Together with the hydraulic fluid and guide bands, the seals
form part of the non-metallic components of the shock absorber and are
therefore subject to natural ageing and
wear. The most important requisite for
a lasting sealing effect is the selection
of the right sealing material. A good
memory for shape retention (compression set) or lowest possible relaxation of
tension is thereby an absolute essential.
For optimum exploitation of material
characteristics, the shape of the seals
and the design of their locations are
also important.
3.13
Control indicators
The piston position of the shock absorbers can be read from all sides by
checking the scale rings on the body of
the cylinder. The sturdy stainless steel
shroud connected to the piston rod protects it from mechanical damage, dirt
and heat and also serves as an indicator.
The fluid level of the reservoir is indicated by the position of the reservoir
piston. A sight glass can be used for
checking the minimum level in type 30.
Type 31 has a marked indicator rod
attached to the base of the external
reservoir.
For details of design and materials,
see Technical Specifications.
(Fig. 1)
(Fig. 2)
(Fig. 3)
SHOCK ABSORBERS
FUNCTION TESTS
The particularly stringent
requirements within the
nuclear industry demand
flawless proof concerning
the functional parameters
for shock absorbers.
This applies both to the
first acceptance test as well
as to recurrent testing.
3.14
sight glass
travel indicator
conn. lug
Type 30
3.15
3
The connections to the various attachment
structures must be form-fit for load actuation. All threaded connections in the flux of
force must be tightened with sufficient
torque.
If, after installation, any welding on the
attachment structure is performed near the
installed shock absorber, care must be taken
that no welding current strays through the
body of the snubber.
After installing the complete system, it is
recommended that each unit be inspected
for the following:
A. Correct fitting of form-fit connections for
load actuation (locking screws on the connecting lugs, secure pins, threaded connections).
B. All installation points must be checked
for adequate freedom of movement during
thermal expansion. Care must be taken to
allow the connecting lugs to move freely in
the connection brackets and care also taken
to prevent the piston from reaching the end
position.
a (leg length)
Type =15
= 6
35 19 13 3/16
35 29 13 3/16
35 39 13 3/16
35 49 13 3/16
35 59 19 5/16
35 69 19 7/16
35 79 19 19/32
35 89 19 13/16
35 99 11 27/32
35 09 13 25/32
35 20 19 1 9/32
=30 =45
= 6
= 6
3/
16
3/
16
3/
16
1/
4
13/
32
17/
32
25/
32
1 1/32
1 1/8
31/
32
3/
16
3/
16
3/
16
9/
32
15/
32
5/
8
7/
8
1 3/16
1 9/32
1 1/16
conn. lug
travel indicator
ball bushing
weld-on bracket
Type 31
3.16
SHOCK ABSORBERS
MAINTENANCE RECOMMENDATIONS
Shock absorbers are components of great safetyrelated significance for a
plant. They offer protection to the piping system
and other components
against dynamic overloading due to unplanned
load events. As these are
unpredictable, the complete functional safety of the
shock absorbers must be
guaranteed at all times.
For normal operating conditions shock absorbers are designed to function for the entire
40 year life of a plant. The seals and hydraulic fluid should be changed at least once
during this period, at the latest after 20
years.
However, under certain conditions (extreme
stresses) shock absorbers can experience premature ageing and increased mechanical wear.
Preventive maintenance is recommended in
order to make sure the shock absorbers remain fully operational and reliable. This maintenance is the responsibility of the plant operators.
Measures
1. Regular inspection visual inspection, once per year
2. Extended inspection function tests, 12 years after
commissioning at the latest.
Implementation
Inspection and maintenance work should be
carried out by specially trained personnel.
LISEGA servicing specialists can do this if
required. For dynamic function tests, qualified
test benches which can also be brought to
the plant are available.
1. Regular inspection
Regular inspection should involve a visual
inspection carried out once a year on all units
installed. The first inspection should take
place immediately before commissioning.
During the regular inspection, not only the
shock absorbers must be inspected, but also
the environmental conditions and installation
situation. The check list should include the
following points:
all units to be inspected, noting
installation position
planned operational connection
displacements
special environmental or operating
conditions.
any maintenance work previously
carried out.
3.17
3
The following should be checked at the
installed position:
Conformity of name plate data with
check list.
Correct form fitting of all connections for
load actuation
Correct freedom of movement of shock
absorber during operating displacements
Position of main piston rod as regards
sufficient stroke, including travel reserve
(minimum 3/8 inch [10 mm] ).
Exterior condition of shock absorber for
any damage or leakage.
Surrounding area for possible signs of
unusual operating conditions,
e.g. increased temperature
3.18
Fig. 1
Fig. 2
Fig. 5
Fig. 3
lug
lug
OD
Fig. 6
friction
tube
= 0.1...0.4 (friction value)
Fig. 4
friction
3.19
OD
lug
friction
0-2mm
0 - 0.08
inch [0-2mm]
Lug dimensions
tube
1.5 x N
Catalog dimensions B1
add. 0.08 inch [2mm]
3
LISEGA standard design
To provide the ideal solution for all areas of
application and at the same time achieve
the most favorable performance weight
ratios, LISEGA offers four standard designs.
Type 36 .. .1/2/3
clamp
material
840F
930F
950F
985F
1040F
[450C]
[500C]
[510C]
[530C]
[560C]
alloy
alloy
alloy
alloy
alloy
steel
steel
steel
steel
steel
permissible
permanent
tensile stress
100%
90%
55%
65%
55%
45%
Type 36
Type 37
Type 37. .. 1/2/3/4/5/6
Special designs
In some cases, special designs can be a useful alternative to pipe clamps types 36 and
37. Especially in cases of parallel and angulated arrangements, standardized design
and calculation methods have proven their
worth.
Type 36 .. .4/5
Special clamp for angular arrangement
Selection
The selection tables are divided according to
pipe diameters. Via the temperature ranges
and the permissible loads, the type designation for the appropriate clamp is found. After
that, the installation dimensions are to be
checked using the drawing. Special attention
must be given to the lug connections of shock
absorbers, energy absorbers or rigid struts.
If the standard pin connection d1 does not
fit, another appropriate weld-on bracket (see
page 3.8) can be provided.
Type 37 .. .7/8/9
3.20
B
2
2
2
B1
B
2
2
2
B1
B
2
2
2
B1
3/
4
3/
4
3/
4
max.
F load gr.
2
0.35
2
0.35
2
0.35
lbs
1.7
2.2
2.2
3/
4
3/
4
3/
4
max.
F load gr. lbs
2.4
3
0.35
2.8
3
0.35
2.8
2
0.35
3/
3/
3/
max.
F load gr. lbs
0.35
3
2.4
0.35
3
3.1
0.35
2
3.1
Type 36 .. .1
B
2
2
2
max.
B1 F load gr.
1 0.35
4
1 0.35
3
1 0.35
3
lbs
3.9
4.6
4.6
B
2
2
2
B1
1
1
1
max.
F load gr.
0.35
4
0.35
3
0.35
3
lbs
4.6
5.5
5.7
A
5
5
5
B
2
2
2
max.
B1 F load gr. lbs
1 0.35
4
4.8
1 0.35
3
5.7
1 0.35
3
5.9
B
2
2
2
max.
B1 F load gr.
11/4 0.44
5
11/4 0.44
4
11/4 0.44
4
B
2
2
2
B1
13/8
13/8
11/4
3.21
max.
F load gr. lbs
0.44
5
11
0.44
4
14
0.44
4
12
A
7
7
7
7
7
B
2
2
4
2
4
B1
1 3/8
1 3/8
2 3/8
1 1/4
2 3/8
max.
F load gr.
0.44 5
0.44 4
0.51 5
0.44 4
0.51 5
lbs
11
15
26
13
26
B1
1 3/8
1 1/4
2 3/8
1 1/4
2 3/8
max.
F load gr.
5
0.44
4
0.44
5
0.51
4
0.44
5
0.51
lbs
13
15
28
14
29
B
2
2
4
2
4
A
8
8
8
8
8
max.
F load gr. lbs
13
5
0.44
16
4
0.44
36
6
0.51
15
4
0.44
30
5
0.51
B
2
2
4
2
4
B1
1 3/8
1 1/4
2 3/8
1 1/4
2 3/8
B
2
2
4
2
4
max.
B1 F load gr. lbs
1 3/8 0.44
15
5
1 1/4 0.44
17
4
2 3/8 0.51
39
6
1 1/4 0.44
17
4
2 3/8 0.51
34
5
B
2
2
2
2
4
2
2
4
B1
1 3/8
1 3/4
1 1/4
1 9/16
2 3/8
1 1/4
1 9/16
3 1/8
Type 36 .. .1/2
1040 F d1
0.787
1.181
0.590
0.787
1.181
0.590
1.7
0.590
2.9
1.181
7.6
Emax
10 5/8
10 5/8
12 3/8
12 3/8
13 3/8
12 5/8
12 5/8
13 5/8
A
9
9 1/2
9
9 1/2
9
9
9 1/2
9 1/2
max.
F load gr.
0.44 5
0.44 6
0.44 4
0.44 5
0.51 6
0.44 4
0.44 4
0.63 6
lbs
17
25
18
24
41
18
23
58
Type 36 .. .4
3.22
B
2
2
2
2
4
2
2
4
B1
1 3/4
1 3/4
1 9/16
1 3/4
3 1/8
1 9/16
1 3/4
3 1/8
max.
F load gr.
6
0.44
6
0.51
5
0.44
6
0.51
6
0.51
4
0.44
5
0.51
6
0.63
lbs
28
32
30
37
63
28
34
66
B
2
2
2
2
4
2
2
4
B1
1 3/4
1 3/4
1 9/16
1 3/4
3 1/8
1 9/16
1 3/4
3 1/8
max.
F load gr.
6
0.44
6
0.51
5
0.44
6
0.51
6
0.51
4
0.44
5
0.51
6
0.63
lbs
31
35
31
45
73
28
36
75
A
12 1/2
13
12 1/2
13
12 1/2
13
12 1/2
13
12 1/2
13
B
2
2
2
2
4
4
2
2
4
4
B1
1 3/ 4
1 3/ 4
1 9/16
1 3/ 4
3 1/ 8
3 1/ 2
1 9/16
1 3/ 4
3 1/ 8
3 1/ 2
max.
F load gr. lbs
33
0.44 6
37
0.51 6
33
0.44 5
48
0.51 6
77
0.51 6
106
0.63 7
30
0.44 4
40
0.51 5
80
0.63 6
95
0.63 6
B
2
2
2
2
4
4
2
2
4
4
B1
1 3/4
1 3/4
1 9/16
1 3/4
3 1/8
3 1/2
1 9/16
1 3/4
3 1/8
3 1/2
max.
F load gr. lbs
35
0.44 6
41
0.51 6
35
0.44 5
49
0.51 6
82
0.51 6
110
0.63 7
32
0.44 4
42
0.51 5
82
0.63 6
99
0.63 6
Type 36 .. .1/2
3.23
A
13 3/4
14
13 1/2
14
13 1/2
14
13 1/2
14
13 1/2
14
13 1/2
14
B
2
2
4
4
2
2
4
4
2
2
4
4
B1
1 3/4
1 3/4
3 1/8
3 1/2
1 9/16
1 3/4
3 1/8
3 1/2
1 9/16
1 3/4
3 1/8
3 1/2
max.
F load gr. lbs
38
6
0.44
42
6
0.51
75
7
0.51
93
7
0.63
35
5
0.44
51
6
0.51
82
6
0.51
114
7
0.63
34
4
0.44
44
5
0.51
91
6
0.63
106
6
0.63
B1
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
max.
F load gr.
0.44 5
0.51 6
0.51 6
0.63 7
0.63 7
0.44 5
0.51 6
0.51 6
0.63 7
0.83 7
0.44 4
0.51 5
0.51 6
0.63 6
0.83 7
lbs
42
53
76
110
156
44
62
86
128
187
41
55
86
119
185
Type 36 .. .1/2/3
B1
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
max.
F load gr.
5
0.44
6
0.51
6
0.51
7
0.63
7
0.63
5
0.44
6
0.51
6
0.51
7
0.63
7
0.83
4
0.44
5
0.51
6
0.51
6
0.63
7
0.83
lbs
44
55
79
119
168
50
66
93
141
200
44
60
90
130
196
Type 36 .. .4/5
Emax
15 1/2
15 1/2
15 1/2
16 1/8
16 1/8
18 7/8
18 7/8
18 7/8
19 1/2
19 1/2
18 3/4
19 1/2
19 1/2
19 1/2
20 1/8
A
17 1/4
17 1/2
18 1/4
17 1/2
18 1/4
17 1/4
17 1/2
18 1/4
17 1/2
18 1/4
17 1/4
17 1/2
18 1/4
17 1/2
18 1/4
B
2 1/ 4
2 1/ 4
2 1/ 4
4 3/ 4
4 3/ 4
2 1/ 4
2 1/ 4
2 1/ 4
4 3/ 4
4 3/ 4
2 1/ 4
2 1/ 4
2 1/ 4
4 3/ 4
4 3/ 4
3.24
Type 36 .. .1/2/3
Type
36 37 11
36 37 12
36 37 13
36 37 14
36 37 15
36 37 21
36 37 22
36 37 23
36 37 24
36 37 25
36 37 31
36 37 32
36 37 33
36 37 34
36 37 35
B1
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
1 9/16
1 3/4
2 3/8
3 1/2
4 3/4
max.
F load gr.
5
0.44
6
0.51
6
0.51
7
0.63
8
0.63
5
0.44
6
0.51
6
0.51
7
0.63
7
0.83
4
0.44
5
0.51
6
0.51
6
0.63
7
0.83
lbs
46
57
82
121
192
50
69
95
143
205
46
60
95
132
200
B1
A
B
19 1/4 2 1/4 1 9/16
19 1/2 2 1/4 1 3/4
20 1/2 2 1/4 2 3/8
19 1/2 4 3/4 3 1/2
20 1/2 4 3/4 4 3/4
19 1/4 2 1/4 1 9/16
19 1/2 2 1/4 1 3/4
20 1/2 2 1/4 2 3/8
19 1/2 4 3/4 3 1/2
20 1/2 4 3/4 4 3/4
19 1/4 12 1/4 9 1/16
19 1/4 2 1/4 1 9/16
19 1/2 2 1/4 1 3/4
20 1/2 2 1/4 2 3/8
19 1/2 4 3/4 3 1/2
20 1/2 4 3/4 4 3/4
19 1/4 12 1/4 9 1/16
max.
F load gr.
0.44 5
0.51 6
0.51 6
0.63 7
0.83 8
0.44 5
0.51 6
0.51 6
0.63 7
0.83 7
0.83 8
0.44 4
0.51 5
0.51 6
0.63 6
0.83 7
0.83 8
lbs
51
62
90
135
214
55
75
101
154
225
423
51
65
100
146
215
436
Type 36 .. .4/5
Type
36 41 11
36 41 12
36 41 13
36 41 14
36 41 15
36 41 21
36 41 22
36 41 23
36 41 24
36 41 25
37 41 27
36 41 31
36 41 32
36 41 33
36 41 34
36 41 35
37 41 37
Emax
16 7/8
16 7/8
16 7/8
17 1/2
18 1/2
20 1/8
20 1/8
20 1/8
20 5/8
20 5/8
22 7/8
20 1/8
20 7/8
20 7/8
20 7/8
21 1/2
23 5/8
Type 37 .. .7
3.25
max.
F load gr.
5
0.44
6
0.51
6
0.51
7
0.63
8
0.83
5
0.44
6
0.51
6
0.51
7
0.63
7
0.83
8
0.83
4
0.44
5
0.51
6
0.51
6
0.63
7
0.83
8
0.83
lbs
53
66
93
139
220
58
78
108
161
236
436
50
68
105
150
220
440
max.
F load gr.
0.51 5
0.51 6
0.51 6
0.63 7
0.83 8
0.51 5
0.51 6
0.51 6
0.63 7
0.83 7
0.83 8
0.51 4
0.51 5
0.51 6
0.63 6
0.83 7
0.83 8
1.02 9
lbs
57
73
104
154
240
62
84
115
179
256
461
55
75
115
157
247
471
640
Type 36 .. .1/2/3
Type 36 .. .4/5
Type 37 .. .7/8
Calculation of interim values: linear interpolation.
The connecting load group has to be stated in the order. On selection of a lower load group than stated in
the table, the E dim. of the clamp is reduced in accordance with the E dim. of the weld-on bracket (see page 3.8).
Lug dimensions: F less 0.04 inch; B1 plus 0.08 inch (see page 3.19).
3.26
Type 37 .. .1/2/3/4/5/6
max.
B1 F load gr.
51/8 0.51 6
53/8 0.51 7
71/8 0.63 8
101/4 0.83 9
91/16 0.83 9
41/8 0.51 6
51/8 0.51 7
53/8 0.63 7
71/8 0.83 8
71/2 0.83 8
71/2 0.83 8
97/8 1.02 9
41/8 0.51 6
51/8 0.51 6
53/8 0.63 7
71/8 0.83 8
71/2 1.02 8
97/8 1.02 9
lbs
102
156
242
426
494
94
151
208
322
395
440
650
97
144
211
317
400
685
max.
B1 F load gr.
B
1040 F d1 Emax A
21 5/8 25 1/2 6 3/4 5 1/8 0.51 6
1.181
1/
22
26 1/2 6 3/4 5 3/8 0.51 7
1.968
4
23 3/8 26 3/4 9
7 1/8 0.63 8
2.361
25
27 3/4 13 10 1/4 0.83 9
2.755
25
25 1/4 12 1/4 9 1/16 0.83 9
2.755
1
25
24 3/4 5 1/2 4 1/8 0.51 6
/
1.181
4
25 3/4 25 1/4 6 3/4 5 1/8 0.51 7
1.968
25 3/4 25 3/4 7
5 3/8 0.63 7
1.968
3
1
1
26 /4 26 /2 9 /2 7 1/8 0.83 8
2.361
26 3/4 27
9 1/2 7 1/2 0.83 8
2.361
26 3/4 28 1/2 9 3/4 7 1/2 0.83 8
2.361
28 1/2 25 3/4 13
9 7/8 1.02 9
2.755
5
3
1
25 /8 24 /4 5 /2 4 1/8 0.51 6
1.181
6.0
25 5/8 25 1/2 6 3/4 5 1/8 0.51 6
1.181
11.6
26 1/8 25 1/2 7
5 3/8 0.63 7
1.968
15.2
27 3/8 27 1/4 9
7 1/8 0.83 8
2.361
24.0
3
1
1
27 /8 27 /4 9 /2 7 1/2 0.83 8
2.361
29.5
29
25 3/4 13
9 7/8 1.02 9
2.755
44.0
29
26 1/2 15 1/4 11 7/16 1.02 9
2.755
59.0
lbs
111
165
256
442
530
105
162
221
337
410
471
730
105
154
221
333
415
725
890
Type 37 .. .7/8/9
Type
37 56 11
37 56 12
37 56 13
37 56 14
37 56 17
37 56 21
37 56 22
37 56 23
37 56 24
37 56 25
37 56 26
37 56 28
37 56 31
37 56 32
37 56 33
37 56 34
37 56 35
37 56 38
37 56 39
3.27
Type 37 .. .1/2/3/4/5/6
A
29 1/2
30 1/4
30 3/4
31 3/4
29 1/4
29 3/4
28 3/4
29 1/4
29 3/4
30 1/2
31
32 1/4
29 3/4
28 3/4
29 1/2
29 1/2
31 1/4
31 1/4
29 3/4
30 1/4
B1
B
6 3/4 51/8
6 3/4 53/8
9
71/8
13 101/4
12 1/4 91/16
13
97/8
5 3/4 45/16
7
53/8
7
53/8
9 1/2 71/8
9 1/2 71/2
9 3/4 71/2
13
97/8
5 3/4 45/16
7
53/8
7
53/8
9
71/8
9 1/2 71/2
13
97/8
1
15 /4 117/16
max.
F load gr. lbs
121
0.63 6
186
0.63 7
278
0.63 8
473
0.63 9
588
0.83 9
685
0.83 9
128
0.63 6
199
0.63 7
243
0.63 7
375
0.83 8
456
0.83 8
505
0.83 8
820
1.02 9
131
0.63 6
194
0.63 6
245
0.63 7
365
0.83 8
454
0.83 8
810
1.02 9
1.02 9 1000
Type 37 .. .7/8/9
3.28
Type 37 .. .1/2/3/4/5/6
Type 37 .. .8/9
3.29
A
35 3/4
36 1/2
36 3/4
37 3/4
38 1/2
38 3/4
35 3/4
34 3/4
35 1/4
35 3/4
36 3/4
38 1/2
35 3/4
34 3/4
35 3/4
35 3/4
37 1/4
37 1/4
35 3/4
36 1/2
B
63/4
63/4
9
13
13
13
13
53/4
7
7
91/2
93/4
13
53/4
7
7
9
91/2
13
151/4
B1
51/8
53/8
71/8
101/4
101/4
101/4
97/8
45/16
53/8
53/8
71/8
71/2
97/8
45/16
53/8
53/8
71/8
71/2
97/8
117/16
max.
F load gr. lbs
142
6
0.63
216
7
0.63
313
8
0.63
531
9
0.63
603
9
0.83
693
9
0.83
821
9
0.83
154
6
0.63
234
7
0.63
282
7
0.63
420
8
0.83
587
8
0.83
940
9
1.02
153
6
0.63
226
6
0.63
279
7
0.63
400
8
0.83
505
8
0.83
920
9
1.02
1140
9
1.02
B1
51/8
53/8
71/8
101/4
101/4
101/4
97/8
45/16
53/8
53/8
71/8
71/2
97/8
117/16
45/16
53/8
53/8
71/8
71/2
97/8
117/16
max.
F load gr.
6
0.63
7
0.63
8
0.63
9
0.63
9
0.83
9
0.83
9
0.83
6
0.63
7
0.63
7
0.63
8
0.83
8
0.83
9
1.02
9
1.02
6
0.63
6
0.63
7
0.63
8
0.83
8
0.83
9
1.02
9
1.02
Type 37 .. .1/2/3/4/5/6
B
63/4
63/4
9
13
13
13
13
53/4
7
7
91/2
93/4
13
151/4
53/4
7
7
9
91/2
13
151/4
lbs
157
238
343
553
644
747
860
167
258
316
458
636
1010
1220
167
254
309
444
556
1000
1260
Type 37 .. .8/9
3.30
Type 36 .. .1/2/3
Prevention of twisting
To prevent the clamp from twisting, it is
recommended that a shear lug be welded
to the pipe (see also page 3.19).
The lug dimensions can be found in the
selection tables for dynamic clamps on
pages 3.21 3.30.
Type 36
This design has a solid upper yoke with integrated connection bracket and, depending on
the load range, one or two U-bolts with inlay
plate are provided.
Type 37
This is the heavier type for larger pipe diameters and higher loads. Normally, the
bracket type 35 is welded to the upper yoke.
If the bracket is supplied loose on customer
request, it must be welded on site following
the welding instructions on page 3.16. The
counterpart to the yoke consists of one or
two flat steel straps depending on load. The
straps are pinned to the yoke to make transport easier. For installation, the straps must
be removed from the forked blocks by loosening the pin connection. The yoke is
placed on the shear lug. From the opposite
side the flat steel strap is fitted into the bolton clevises, fixed with the pins and secured
by cotter pins. The clamp is then checked and
positioned as required.
Type 37 .. .1/2/3/4/5/6
Type 36 .. .4/5
3.31
3.32
ENERGY ABSORBER
TYPE 32
3.33
3
Replacement of shock absorbers
Where thermal movements are relatively small,
energy absorbers constitute an ideal replacement for earlier types of shock absorbers,
often prone to failure. In this way, costly
repairs and recurrent tests are avoided.
flange
special lug
short
extension
extension kit
type 33
To enable energy absorbers to be fitted to existing
connections, an assortment of special adaptors is
available besides the standard extension (type 33)
Development cooperation
The development of type 32 energy absorbers is the result of specific and successful
cooperation between SARGENT & LUNDY, a
leading American engineering company, and
LISEGA.
SARGENT & LUNDY also created the calculation software, or GAPP program. Both this
prog-ram and the energy absorbers themselves have been rigorously tested by the
American NRC (Nuclear Reactor Commission),
and approved for use in nuclear power stations.
The unique capacity of the energy absorber to take up and convert kinetic energy
brings the user valuable benefits:
limitation of dynamic loads for attached
components
lighter steel constructions enabled
no need to strengthen auxiliary
structures
small installation dimensions minimize
danger of interference
thermal piping movement not impeded
no maintenance required due to
absence of wear parts
no recurrent testing required
simple installation via length
adjustment
3.34
Order details:
Energy absorber
type 32 .. 16
t1= t2= inch
with two weld-on brackets
type 35 .. ..
Marking:
3.35
Type
32 18 16
32 38 16
32 42 16
32 52 16
32 62 16
32 72 16
32 82 16
32 92 16
Nom.load
(lbs)
675
1800
4000
10350
22450
44900
78600
123500
s
3/
16
3/
16
3/
16
3/
16
1/
4
3/
8
1/
2
t1
0
0
0
0
0
0
0
to 3/4
to 7/8
to 1
to 1
to 1
to 1 1/8
to 1 1/8
0
0
0
0
0
0
0
t2
D
d3
to 3/4
to 7/8
to 1
to 1
to 1
to 1 1/8
to 1 1/8
21/4
23/8
31/4
45/8
51/8
73/4
97/8
Individual use
The standard designs shown in the table do
not show the full scope of supply possibilities.
LISEGA can adapt the products to the special
requirements of the user.
E
F
11/
R
16
2
2 5/16
2 9/16
3 15/16
5 1/8
6 1/2
9/
16
13/
16
7/
8
1 3/16
1 3/4
2 3/8
2 15/16
SG
0.36
0.40
0.48
0.63
0.87
1.38
1.74
Weight
(lbs)
1.8
4.0
8.0
25.4
41.0
104.0
231.0
ENERGY ABSORBER
MODE OF OPERATION
free stroke (compression)
-0.12
10
load
load(kips)
F / kN
MODE OF OPERATION
An energy absorber works via an adjustable
free stroke that absorbs thermal movements.
The adjustment of this free stroke can be
made in the range of 11/8 inch [30 mm] (for
a medium sized design). Within this range
the pipe is free to move without resistance.
Dynamic shocks, on the other hand, are
limited in their movement by stops. The
resulting forces are transferred to the surrounding structures up to the given nominal
load, and when above that, are transformed
into deformation energy by the energy
absorber. This has the effect of providing a
controlled protection from overload for the
attached components.
-0.08
-0.04
-2
0.04
0.08
0.12
stroke s(inch)
/ mm
stroke
-6
-10
Tested load/travel characteristics on oscillating loadings
nominal load.
3.36
RIGID STRUTS
TYPE 39
In modern support concepts,
rigid struts play an important role in the optimum
support system under all
operating conditions.
Secure and reliable positioning is a key element in
its operational safety and
long life.
Tasks
LISEGA rigid struts type 39 have a number
of important functions for the operational
safety of piping systems:
Absorption of shocks from unexpected
load events. (See page 3.1)
Guidance of pipe systems to control
direction of calculated thermal displacement direction.
Stabilization of flexible pipe systems by
fixing the so-called zero positions.
Mode of operation
Rigid struts form rigid connections with ball
bushings between the piping and structure.
No restriction is placed on the limited movement of the pipe within the angular displacement of the strut. Any movement in the axial
direction of the strut is suppressed.
Design
The struts consist of a rigid body with a ball
bushing joint as a connection at both ends.
The structural attachment is formed by a weldon bracket type 35 (see page 3.8). The connection to the piping is formed by the appropriate dynamic clamp type 36 / 37 (see pages
3.21 - 3.30).
The body is made from a tube tapered at the
ends by forging. The shape corresponds to
the flux of force, and allows a favorable performance/ weight ratio. Welding has been
completely dispensed with. The connections
are designed as ball bushing joints with
turnbuckle function having left hand / right
hand threads and enable a
length adjustment in
a range of
6 or 12
inch [150 or
300 mm]. Flat faces are
forged on the body to allow a
proper use of wrench and facilitate
length adjustments in the installed condition.
Fine threads are used on the ball bushing
joints to ensure secure locking.
3.37
The strut bodies are manufactured in standard lengths. This way, LISEGA rigid struts
are available from stock, TV qualification
tested and ASME qualified.
3
Material:
Carbon steel
3
3
6
6
Type
39 2. .4
39 3. .4
39 4. .4
39 5. .4
39 6. .4
39 7. .4
39 8. .4
39 9. .3
39 0. .3
Nom. load
A
(lbs x 1000)
1
1 /8
0.90
11/2
1.80
15/8
4.00
23/8
10.35
31/4
22.45
43/4
44.90
57/8
78.60
81/4
123.50
11
224.00
D
d3
11/2
13/4
21/4
23/8
31/4
0.393
0.472
0.590
0.787
1.181
1.968
2.361
2.755
3.936
4
41/2
41/2
61/4
E
min
11 3/4
11 3/4
11 3/4
153/4
153/4
191/2
291/2
311/2
391/4
E
max
74 3/4
84 3/4
94 1/2
94 1/2
114 1/4
134
134
143 3/4
163 1/2
SW1
SW2
SG
1.06
1.26
1.42
2.36
2.36
2.75
3.74
4.33
6.10
1.26
1.42
1.81
1.97
2.75
3.35
3.94
3.94
5.31
0.36
0.40
0.48
0.63
0.87
1.38
1.74
1.93
2.76
Order details:
Rigid strut type 39 .. ..
3.38
RIGID STRUTS
TYPE 39
Selection
When selecting rigid struts from the following
tables, the following should be observed:
0.90
Type
39 .0 34
39 .0 44
39 .0 54
39 .0 74
39 .0 84
39 .1 04
39 .1 24
39 .1 54
39 .1 74
39 .2 04
39 .2 24
39 .2 54
39 .2 74
39 .3 04
39 .3 24
39 .3 54
39 .3 74
39 .4 04
39 .4 24
39 .4 54
39 .4 74
39 .5 04
Adjustmentrange
11 3/4 - 17 3/4
15 3/4 - 21 3/4
19 1/2 - 25 1/2
23 1/2 - 35 1/2
29 1/2 - 35 1/2
33 1/4 - 45 1/4
43 1/4 - 55 1/4
53 - 65
62 3/4 - 74 3/4
72 3/4 - 84 3/4
82 1/2 - 94 1/2
92 1/4 - 104 1/4
102 1/4 - 114 1/4
112 - 124
122 - 134
131 3/4 - 143 3/4
141 1/2 - 153 1/2
151 1/2 - 163 1/2
161 1/4 - 173 1/4
171 1/4 - 183 1/4
181 - 193
190 3/4 - 202 3/4
1.80
4.00
10.35
123.5
Load group
E-middle
14 3/4
2.8
18 3/4
3.7
22 1/2
4.4
29 1/2
5.3
32 1/2
39 1/4
7.0
49 1/4
8.8
59
11
68 3/4 13
78 3/4 (15)
88 1/2 (16)
98 1/4
108 1/4
118
128
137 3/4
147 1/2
157 1/2
167 1/4
177 1/4
187
196 3/4
Weight (lbs)
4.2
5.1
5.9
6.8
9.2
11
14
16
19
(21)
(23)
5.9
7.5
8.8
14
18
21
24
28
32
35
39
42
(45)
(48)
(53)
14
16
18
21
24
28
22
25
30
34
39
42
46
51
(55)
(59)
(63)
(67)
36
45
54
63
72
80
89
98
107
116
125
133
(142)
(151)
(160)
(169)
3.39
40
46
58
73
86
100
114
127
141
154
168
181
196
209
223
236
249
262
(278)
93
101
122
143
165
187
207
229
249
271
293
313
335
357
377
400
420
440
Type
39 .083
39 .093
39 .103
39 .113
39 .123
39 .133
39 .123
39 .153
39 .173
39 .203
39 .223
39 .253
39 .273
39 .303
39 .323
39 .353
39 .373
39 .403
39 .423
39 .453
39 .473
39 .503
39 .523
39 .553
39 .573
39 .603
AdjustmentE-middle
range
31 1/2 - 37 1/2 34 1/2
35 1/2 - 41 1/2 38 1/2
39 1/4 - 45 1/4 42 1/4
43 1/4 - 49 1/4 46 1/4
47 1/4 - 53 1/4 50 1/4
51 1/4 - 57 1/4 54 1/4
43 1/4 - 55 1/4 49 1/4
59
53 - 65
62 3/4 - 74 3/4 68 3/4
72 3/4 - 84 3/4 78 3/4
82 1/2 - 94 1/2 88 1/2
92 1/4 - 104 1/4 98 1/4
102 1/4 - 114 1/4 108 1/4
118
112 - 124
128
122 - 134
131 3/4 - 143 3/4 137 3/4
141 1/2 - 153 1/2 147 1/2
151 1/2 - 163 1/2 157 1/2
161 1/4 - 173 1/4 167 1/4
171 1/4 - 183 1/4 177 1/4
187
181 - 193
190 3/4 - 202 3/4 196 3/4
200 3/4 - 212 3/4 206 3/4
210 1/2 - 222 1/2 216 1/2
220 1/4 - 232 1/4 226 1/4
230 1/4 - 242 1/4 236 1/4
224
Load group
Weight (lbs)
150
159
385
170
405
420
440
192
465
220
520
251
575
282
625
313
680
344
730
373
785
405
835
530
890
570
940
610
995
650
1045
690
1100
730
1150
770
1200
810
1255
850
1310
(890)
1365
(925)
1415
3
Table of permissible normal loads at normal / excess lengths
500
400
300
500
400
300
200
39 0. .3
200
100
90
80
70
39 9. .3
39 8. .4
100
90
80
70
39 7. .4
50
40
50
40
30
30
20
20
39 6. .4
10
9
8
7
10
9
8
7
39 5. .4
5
4
3
5
4
3
39 4. .4
2
39 3. .4
1
0.9
0.8
0.7
1
0.9
0.8
0.7
39 2. .4
0.5
0.5
70
90
110
130
150
170
190
210
230
250
length (inch)
broken line: slenderness ratio: 150 200
3.40
3.41
Pipe whip restraints have safety-related significance and are subject to the highest demands in quality, design and manufacture.
As a large scale supplier to the latest generation of nuclear plants, LISEGA has successfully proven its qualification to supply this
specific design.
4
PRODUCT
GROUP
CONTENTS
PAGE
PRODUCT
GROUP
6
7
8
9
4.0
Standardization
Pipe clamps, clamp bases, pipe weld-on lugs
and U-bolts constitute the group of pipe connection components. Regarding these products, the design criteria for piping systems
lead to a wide variation and hence to a
particularly large number of components.
The dynamic clamps in Product Group 3
(see page 3.19) also belong in principle to
this group. The design of both horizontal
and vertical piping is determined by
diameters
loads
temperature of the medium
For appropriate coverage of the whole spectrum with safe products, LISEGA provides a
complete program of standardized products
for the whole field of application. In line
with the special requirements of the field of
application, the corresponding ideal design
shape has been developed. Diameters range
from OD 0.84 to 36 inch [OD 21.3 to OD
914.4], the temperature range extends to
Fields of application of
standardized pipe clamps
Type 43 - 48 at T = 660F
Type 43 - 48 at T = 1040F
permissible load
kips
Type 46/48
Type 46/48
Type 44/2x
Type 48
Type 44
Type 45
nominal diameter
4.1
Type 44/2x
Type 43 - 48 at T = 1200F
Type 43
Type 44
Type 43
Type 45
Type 43
inch
Type 44
4
These standardized components are an integral part of the LISEGA modular system, so
connection and load compatibility to the load
groups are correspondingly assured.
Quality
Because of their exposed field of application,
the design and construction of the pipe connection components require particular attention. Just as much care should be spent
on the pipe supports as on the piping itself,
since:
The most important prerequisite for dependable component quality is general standardization.
4.2
Typ 41
Type 42 .. .9
Type 43
Type
Type 42 .. 17
44 .. .1 Type
.2
.3
44 .. .4
.5
.6
.7
.8
.9
Type 44 .. 51
.2
.3
.4
.5
4.3
RISER CLAMPS
TYPE 45, 46, 48
1. Riser clamp type 45
With the riser clamp type 45, the lower
range suited to this design is covered.
Connection to the vertical piping is made via
the shear lugs welded to the pipe. The design
and application of the lugs is the responsibility of the piping manufacturer.
Connection to the load chain is made via
connection pins and LISEGA eye nuts type
60. Up to 3 LISEGA load groups can be
accommodated.
When ordering, the desired span (dimension L)
is to be given.
Material: carbon steel
13CrMo4-5/A387 Gr.12/Gr.22
2. Riser clamp type 46/48
The design of this riser clamp exploits the box
shape as the best precondition for the economical use of material. The individual parts
are bolted together without weldings via
socket connections.
(Patent no. DE3817015)
4.4
CLAMP BASE
TYPE 49
Clamp bases are generally used as slide
bearings (loose supports) for horizontally
arranged piping systems.
If required, components with special dimensions can be supplied (see also Special
Designs, page 4.7).
4.5
Temp. up to
57/8
77/8
660F (350C)
pipe
0.84-3.50
0.84-22
4.25-36
12.75-36
Temp up to
57/8
77/8
97/8
117/8
930F (500C)
pipe
0.84-1.06
1.33-3
3.50-7.625
8.625-18
20-36
Temp. up to
57/8
77/8
97/8
117/8
1040F(560C)
pipe
0.84-3
3.50-6.625
7.625-12.75
14-36
Temp. up to
57/8
77/8
97/8
117/8
1110F(600C)
pipe
0.84-3
3.50-6.625
7.625-12.75
14-36
4
1. Design for lower temperatures and
smaller pipe diameters
The design for this field of application consists
of two shaped halves. On installation with the
piping, the lower section of both halves is
bolted on firmly and provides the slide base.
In the upper section the pipe is secured in
position via a preset screw.
Through the free space under the pipe allowed by the design of the component, constant ventilation of the area is assured.
This is essential for cold piping systems, because otherwise permanent moisture would
develop here after only a short time, causing
corrosion of the piping.
Material: A36
Material: A36
16Mo3/A204/A387 Gr.22
13CrMo4-5/A387 Gr.12/Gr.22
10CrMo9-10/A387 Gr.22
Applications of clamp bases on trapezes
or PTFE see page 4.5.
3. Special designs
For the support of austenitic piping systems,
all clamp bases can be fitted with
corresponding stainless steel inlay plates.
(Fig. 1)
(Fig. 2)
(Fig. 3)
4.6
SPECIAL DESIGNS
Special designs
Although the standardized LISEGA range of
pipe surrounding support components is
comprehensive and covers all common areas
of application, more complicated cases
sometimes arise where only a special solution can solve the problem.
Among other cases, special designs are most
often required especially for the following
specific applications:
exceptionally restricted areas
interferences insurmountable
by common techniques
tailor-made fixed point designs
exceptionally high load requirements
especially high temperatures
(up to 1800F)
abnormal insulation thicknesses
irregularly inclining pipes
special trunnion diameters
LISEGAs customers are not left on their own
in this regard. For such particular assignments
an experienced team of technicians and
engineers is available, ready to react speedily
and flexibly with appropriate solutions. They
are supported by a kit of special tools such
as modern CAD programs and individual inhouse calculation software. In addition to
this, a broad repertoire of well proven basic
designs is on hand.
Every problem has a solution this conviction motivates LISEGAs experts in support
technology. For our clients this can be
demonstrated as required at any time!
4.7
U-BOLTS
TYPE 40
U-bolts
type 40 01 .8 to 40 91 .8
OD
Type
40 01 .8
40 02 .8
40 03 .8
40 04 .8
40 05 .8
40 06 .8
40 07 .8
40 09 .8
40 10 .8
40 11 .8
40 14 .8
40 17 .8
40 22 .8
40 27 .8
40 32 .8
40 36 .8
40 41 .8
40 46 .8
40 51 .8
40 61 .8
40 71 .8
40 76 .8
40 91 .8
OD
0.84
1.06
1.33
1.67
1.90
2.37
2.87
3.50
4.25
4.50
5.50
6.63
8.63
10.75
12.75
14
16
18
20
24
28
30
36
5. digit:
A
1 3/16
1 3/8
1 5/8
2 1/16
2 3/8
213/16
3 7/16
4 1/16
4 7/8
5 1/16
6 1/8
7 3/8
9 3/8
11 5/8
13 3/4
15
17
19 1/8
21 1/8
25 1/8
29 1/8
31 1/8
37 1/8
B
2 3/4
2 3/4
2 3/4
2 7/8
3
3 1/4
3 3/4
4
4 1/2
4 1/2
5
6 1/8
7 1/8
8 3/8
9 5/8
10 1/4
11 1/4
12 5/8
13 5/8
15 5/8
17 5/8
18 5/8
21 5/8
d2 x L
1/ UNC x 23/
4
8
1/ UNC x 23/
4
8
1/ UNC x 23/
4
8
3/ UNC x 23/
8
8
3/ UNC x 21/
8
2
3/ UNC x 21/
8
2
1/ UNC x 3
2
1/ UNC x 3
2
1/ UNC x 3
2
1/ UNC x 3
2
1/ UNC x 3
2
5/ UNC x 33/
8
4
5/ UNC x 33/
8
4
3/ UNC x 4
4
7/ UNC x 41/
8
4
7/ UNC x 41/
8
4
7/ UNC x 41/
8
4
1 UNC x 43/4
1 UNC x 43/4
1 UNC x 43/4
1 UNC x 43/4
1 UNC x 43/4
1 UNC x 43/4
1
1
1
2
2
2
3
4
5
6
7
8
9
10
12
14
15
18
7/
16
1/
2
11/
16
13/
16
15/
16
1/
8
3/
8
3/
4
1/
8
1/
4
3/
4
3/
8
3/
8
3/
8
3/
8
weight
(lbs)
0.12
0.13
0.13
0.35
0.37
0.40
0.85
0.92
1.00
1.03
1.15
2.18
2.54
4.44
5.05
5.38
5.91
12.10
13.10
15.00
16.90
17.90
20.70
2 = carbon steel
4 = stainless steel 1.4301
4.8
OD
Order details:
Weld-on lug for pipes,
type 41 .9 1.
4.9
Type
d3
41 D9 11
41 D9 12
41 29 11
41 29 12
41 39 11
41 39 12
41 49 11
41 49 12
41 59 11
41 59 12
41 69 11
41 69 12
41 79 11
41 79 12
1 1/4
1 1/4
1 1/2
2 5/8
1 7/8
2 7/8
3 1/8
4 3/4
3 3/8
5 1/4
4 3/4
6 1/2
6 3/4
9
0.41
0.41
0.50
0.50
0.65
0.65
0.81
0.81
1.00
1.00
1.34
1.34
1.60
1.60
1
4 1/2
1
4 1/2
1 1/8
4 3/4
1 5/8
4 7/8
1 5/8
5 1/8
2
5 1/2
2 3/8
5 7/8
F perm. (T)
480F [250C]
660F [350C]
1
1
1
1
1
1
2
2
5/
8
5/
8
3/
4
3/
4
7/
8
7/
8
1/
8
1/
8
1/
4
1/
4
5/
8
5/
8
C
5/
8
5/
8
7/
8
7/
8
1/
8
1/
8
1/
2
1/
2
5/
8
5/
8
1
1
1
1
1
1
2
2
2 5/8
2 5/8
G
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
a
leg length
t
5/
16
3/
16
5/
16
3/
16
3/
3/
16
3/
3/
16
1/
1/
1/
1/
5/
1/
5/
1/
3/
5/
16
3/
5/
16
3/
3/
3/
3/
1
1
1 1/ 4
1 1/ 4
weight
(lbs)
0.14
0.50
0.24
1.08
0.46
1.66
1.16
3.52
1.66
5.10
3.52
9.10
7.10
16.10
OD
2.37
2.87
3
3.5
3.5
4.25
4.25
4.5
4.5
5.25
5.25
5.5
5.5
6.25
6.25
6.63
6.63
7.63
7.63
8.63
8.63
9.63
9.63
10.5
10.5
10.75
10.75
12.75
12.75
14
14
14.5
14.5
16
16
16.5
16.5
18
18
20
20
22
22
24
24
26
26
28
28
30
30
Load
group C
7/
C-2
8
7/
C-2
8
7/
C-2
8
7/
C-2
8
2-3 1 1/8
7/
C-2
8
1
2-3 1 /8
7/
C-2
8
2-3 1 1/8
7/
C-2
8
1
2-3 1 /8
7/
C-2
8
3-4 1 1/2
7/
C-2
8
1
3-4 1 /2
2-3 1 1/8
4-5 1 5/8
2-3 1 1/8
4-5 1 5/8
2-3 1 1/8
4-5 1 5/8
2-3 1 1/8
4-5 1 5/8
2-3 1 1/8
4-5 1 5/8
2-3 1 1/8
4-5 1 5/8
3-4 1 1/2
5-6 2
3-4 1 1/2
5-6 2
3-4 1 1/2
5-6 2
3-4 1 1/2
5-6 2
3-4 1 1/2
5-6 2
4-5 1 5/8
6-7 2 5/8
4-5 1 5/8
6-7 2 5/8
4-5 1 5/8
6-7 2 5/8
4-5 1 5/8
6-7 2 5/8
4-5 1 5/8
6-7 2 5/8
4-5 1 5/8
6-7 2 5/8
4-5 1 5/8
6-7 2 5/8
R1
1
1
1
1
1
1
1
3/
4
3/
4
3/
4
3/
4
7/
8
3/
4
7/
8
3/
4
7/
8
3/
4
7/
8
3/
4
1/
8
3/
4
1/
8
7/
8
1/
4
7/
8
1/
4
7/
8
1/
4
7/
8
1/
4
7/
8
1/
4
7/
8
1/
4
1/
8
5/
8
1/
8
5/
8
1/
8
5/
8
1/
8
5/
8
1/
8
5/
8
1/
4
t
5/
16
5/
16
5/
16
5/
16
3/
8
5/
16
3/
8
5/
16
3/
8
5/
16
3/
8
5/
16
5/
8
5/
16
5/
8
3/
8
3/
4
3/
8
3/
4
3/
8
3/
4
3/
8
3/
4
3/
8
3/
4
3/
8
3/
4
5/
8
3/
4
5/
8
3/
4
5/
8
3/
4
5/
8
3/
4
5/
8
3/
4
3/
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1 1/4 3/4
1
2
1 1/4 3/4
1
2
1 1/4 3/4
1
2
1 1/4 3/4
2 1
1 1/4 3/4
1
2
1 1/4 3/4
1
2
d3
0.50
0.50
0.50
0.50
0.65
0.50
0.65
0.50
0.65
0.50
0.65
0.50
0.81
0.50
0.81
0.65
1.00
0.65
1.00
0.65
1.00
0.65
1.00
0.65
1.00
0.65
1.00
0.81
1.34
0.81
1.34
0.81
1.34
0.81
1.34
0.81
1.34
1.00
1.60
1.00
1.60
1.00
1.60
1.00
1.60
1.00
1.60
1.00
1.60
1.00
1.60
R1
a
OD
smax = 4 inch[100mm]
weight
a
Type
E leg length
(lbs)
3/
0.92
41 06 15 5 3/8
16
3/
0.9
41 07 15 5 3/8
16
3/
0.9
41 08 15 5 3/8
16
3/
0.9
41 09 15 5 3/8
16
1/
1.46
41 09 16 5 1/2
4
3/
0.94
41 10 15 5 3/8
16
1
1/
1.52
41 10 16 5 /2
4
3/
0.92
41 11 15 5 3/8
16
1/
1.46
41 11 16 5 1/2
4
3/
0.98
41 13 15 5 3/8
16
1/
1.52
41 13 16 5 1/2
4
3/
0.94
41 14 15 5 3/8
16
1/
3.6
41 14 16 5 3/4
4
3/
0.98
41 16 15 5 3/8
16
1/
3.8
41 16 16 5 3/4
4
1
1/
5
/
1.5
41 17 15
2
4
5/
4.6
41 17 16 5 7/8
16
1/
1.54
41 19 15 5 3/8
4
5/
4.8
41 19 16 5 3/4
16
3
1/
5
/
1.52
41 22 15
8
4
5/
4.8
41 22 16 5 3/4
16
1/
1.56
41 24 15 5 1/8
4
5/
4.8
41 24 16 5 3/4
16
7
1/
4
/
1.56
41 26 15
8
4
5/
4.8
41 26 16 5 1/2
16
1/
1.54
41 27 15 5 1/8
4
5/
4.8
41 27 16 5 3/4
16
1
1/
5
/
3.6
41 32 15
8
4
3/
7.2
41 32 16 5 3/4
8
1/
3.8
41 36 15 4 1/2
4
3/
7.2
41 36 16 4 7/8
8
1/
3.8
41 37 15 4 3/4
4
3/
7.2
41 37 16 5 1/8
8
1/
3.8
41 41 15 4 1/8
4
3/
7.2
41 41 16 4 1/2
8
1/
3.8
41 42 15 4 1/2
4
3/
7.2
41 42 16 4 7/8
8
5/
4.8
41 46 15 3 7/8
16
3/
14.8
41 46 16 4 3/4
8
5/
5
41 51 15 3 3/4
16
3/
14.8
41 51 16 4 3/8
8
5/
5
41 56 15 3 3/8
16
1
3/
14.8
41 56 16 4 /8
8
5/
5
41 61 15 3 1/8
16
3/
14.6
41 61 16 3 3/4
8
5/
5
41 66 15 2 3/4
16
3
3/
14.6
41 66 16 3 /8
8
5/
5
41 71 15 2 3/8
16
3/
14.6
41 71 16 3 1/8
8
5/
5
41 76 15 2
16
3
3/
14.6
41 76 16 2 /4
8
41 .. 13
14
15
16
678678
smax
=1/2 inch
smax
=4 inch
F perm. (T)
Order details:
Weld-on lugs for pipes
R1.5 OD
type 41 .. 1.
4.10
4.11
SELECTION TABLE
OD 0.84- 21.3mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 0.84 (ND 15/1/2), types 42, 43, 45, 49
permissible load (lbs x 1000)
210 480 660 840 930 950 985 1040 1075 1110F d4
Type
0.41
42 01 17 0.56
950
A B
13/4 1
lbs
0.3
load
group
C-D
d2
E
B
0.40 11/8 11/4
lbs
0.7
load
group
C-2
d1
0.48
0.48
0.48
4
51/4
51/4
B
11/4
11/4
11/8
lbs
1.1
1.3
1.3
load
group
C-2
C-2
C-2
E
1
1
1
1
1
1
1
1
1
B
2
2
2
2
2
23/4
23/4
23/4
23/4
load
lbs group
L
4.4 C-4
10
113/4 5.1 C-4
153/4 6.6 C-4
193/4 7.9 C-4
231/2 9.3 C-4
113/4 8.6 C-4
153/4 11.0 C-4
193/4 13.4 C-4
231/2 15.9 C-4
E
7/
Type
45 01 11
45 01 11
45 01 11
45 01 11
45 01 11
45 01 31
45 01 31
45 01 31
45 01 31
0.65
0.45
0.35
0.30
0.35
0.25
0.20
0.15
d1
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
E
23/8
43/8
43/8
61/4
61/4
A
4
6
63/4
63/4
63/4
B
11/2
21/2
21/2
31/2
31/2
C
9
9
9
H
2
4
4
57/8
57/8
lbs
1.3
2.9
4.5
6.6
6.6
4.12
SELECTION TABLE
OD 1.06- 26.9mm
Temperature up to
1200F see page 4.46
Pipe clamps, clamp bases, OD 1.06 (ND 20/ 3/4), types 42, 43, 45, 49
950
1110F
A B
17/8 1
E
d2
0.40 11/4
B
11/4
lbs
0.3
load
group
C-D
lbs
0.7
load
group
C-2
Type
45 02 11
45 02 11
45 02 11
45 02 11
45 02 11
45 02 31
45 02 31
45 02 31
45 02 31
4.13
E
21/2
41/2
41/2
61/2
61/2
E
1
1
1
1
1
1
1
1
1
A
4
6
63/4
63/4
63/4
B
2
2
2
2
2
23/4
23/4
23/4
23/4
B
11/2
21/2
21/2
31/2
31/2
load
group
C-2
C-2
C-2
B
11/4
11/4
11/8
lbs
1.1
1.3
1.4
L
10
113/4
153/4
193/4
231/2
113/4
153/4
193/4
231/2
load
lbs group
4.4 C-4
5.1 C-4
6.6 C-4
7.9 C-4
9.3 C-4
8.6 C-4
11.0 C-4
13.4 C-4
15.9 C-4
C
9
9
9
H
2
4
4
57/8
57/8
lbs
1.3
3.1
4.7
6.9
6.9
SELECTION TABLE
OD 1.33- 33.7mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 1.33 (ND 25/1), types 42, 43, 45, 49
950
A B
21/8 1
lbs
0.4
load
group
C-D
E
d2
B
0.40 11/2 11/4
lbs
0.9
load
group
C-2
B
11/4
11/4
15/8
lbs
1.3
1.8
2.3
load
group
C-2
C-2
C-2
L
10
113/4
153/4
193/4
231/2
113/4
113/4
153/4
153/4
193/4
193/4
231/2
231/2
lbs
5.3
6.2
7.7
9.5
11.0
8.6
22.3
11.0
28.5
13.4
34.5
16.0
41.0
load
group
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
Type
45 03 11
45 03 11
45 03 11
45 03 11
45 03 11
45 03 31
45 03 32
45 03 31
45 03 32
45 03 31
45 03 32
45 03 31
45 03 32
0.70
1.70
0.50
1.70
0.40
1.70
0.30
1.70
0.35
1.65
0.25
1.45
0.20
1.10
0.15
0.90
d1
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
0.48
E
25/8
45/8
65/8
65/8
65/8
E
d1
0.48 43/4
0.48 61/2
0.48 61/2
E
1
1
1
1
1
1
1
1
1
1
1
1
1
A
4
6
63/4
63/4
63/4
B
23/8
23/8
23/8
23/8
23/8
23/4
31/2
23/4
31/2
23/4
31/2
23/4
31/2
B
13/4
23/4
4
4
4
C
9
9
9
H
2
4
57/8
57/8
57/8
lbs
1.5
3.3
7.7
7.7
7.7
4.14
SELECTION TABLE
OD 1.67- 42.4mm
Temperature up to
1200F see page 4.46
Pipe clamps, clamp bases, OD 1.67 (ND 32/11/4), types 42, 43, 45, 49
d2
0.40
lbs
0.4
load
group
C-D
E
B lbs
15/8 11/4 0.9
load
group
C-2
Type
45 04 11
45 04 11
45 04 11
45 04 11
45 04 39
45 04 31
45 04 32
45 04 39
45 04 31
45 04 32
45 04 39
45 04 31
45 04 32
45 04 39
45 04 31
45 04 32
210
2.00
1.45
1.10
0.90
0.75
0.75
1.95
0.55
0.55
1.45
0.45
0.45
1.15
0.35
0.35
0.95
4.15
d1
0.48
0.48
0.48
0.48
0.48
0.63
0.63
0.48
0.63
0.63
0.48
0.63
0.63
0.48
0.63
0.63
E
23/4
43/4
63/4
63/4
63/4
d1
0.48
0.48
0.48
E
1
1
1
1
1
11/8
11/8
1
11/8
11/8
1
11/8
11/8
1
11/8
11/8
A
4
6
63/4
63/4
63/4
E
B
51/4 11/4
71/8 11/4
71/8 15/8
B
23/4
23/4
23/4
23/4
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
B
13/4
23/4
4
4
4
L
113/4
153/4
193/4
231/2
133/4
133/4
133/4
173/4
173/4
173/4
213/4
213/4
213/4
251/2
251/2
251/2
C
9
9
9
lbs
1.5
2.0
2.5
load
group
C-2
C-2
C-2
lbs
9
12
14
17
16
16
29
19
19
36
23
23
43
27
27
50
load
group
C-4
C-4
C-4
C-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
H
2
4
57/8
57/8
57/8
lbs
1.5
3.5
7.8
7.8
7.8
SELECTION TABLE
OD 1.90- 48.3mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 1.90 (ND 40/11/2), types 42, 43, 45, 49
950
lbs
0.6
load
group
C-D
E
13/4
B lbs
11/4 0.9
load
group
C-2
d1
0.48
0.48
0.48
E
51/2
71/4
71/4
B
11/4
11/4
15/8
lbs
1.5
2.0
2.6
load
group
C-2
C-2
C-2
B
31/8
31/8
31/8
31/8
31/8
31/8
43/4
31/8
31/8
43/4
31/8
31/8
43/4
31/8
31/8
43/4
L
113/4
153/4
193/4
231/2
133/4
133/4
133/4
173/4
173/4
173/4
213/4
213/4
213/4
251/2
251/2
251/2
lbs
11
13
16
19
18
18
35
22
22
45
26
26
52
31
31
60
load
group
C-4
C-4
C-4
C-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
d2
0.40
A
3
B
1
Type
45 05 11
45 05 11
45 05 11
45 05 11
45 05 39
45 05 31
45 05 32
45 05 39
45 05 31
45 05 32
45 05 39
45 05 31
45 05 32
45 05 39
45 05 31
45 05 32
0.85
0.85
2.20
0.65
0.65
1.80
0.50
0.50
1.45
0.40
0.40
1.20
d1
0.48
0.48
0.48
0.48
0.48
0.63
0.63
0.48
0.63
0.63
0.48
0.63
0.63
0.48
0.63
0.63
1
1
1
1
1
11/8
11/8
1
11/8
11/8
1
11/8
11/8
1
11/8
11/8
A
4
6
63/4
63/4
63/4
B
2
3
4
4
4
C
9
9
9
H
2
4
57/8
57/8
57/8
lbs
1.8
3.7
7.9
7.9
7.9
4.16
SELECTION TABLE
OD 2.37- 60.3mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 2.37 (ND 50/2), types 42, 43, 45, 49
950
d2
0.48
B
1
lbs
0.6
load
group
C-D
E
B
21/8 11/2
lbs
1.7
load
group
C-2
Type
45 06 11
45 06 12
45 06 11
45 06 12
45 06 11
45 06 12
45 06 11
45 06 12
45 06 39
45 06 31
45 06 32
45 06 39
45 06 31
45 06 32
45 06 39
45 06 31
45 06 32
45 06 39
45 06 31
45 06 32
0.95
0.95
2.15
0.75
0.75
1.65
0.60
0.60
1.35
0.50
0.50
1.10
4.17
d1
0.48
0.48
0.48
E
61/8
77/8
77/8
B
11/2
2
2
lbs
2.6
3.5
4.6
load
group
C-4
C-4
C-4
B
23/4
31/8
23/4
31/8
23/4
31/8
23/4
31/8
4
4
43/4
4
4
43/4
4
4
43/4
4
4
43/4
L
113/4
113/4
153/4
153/4
193/4
193/4
231/2
231/2
153/4
153/4
153/4
193/4
193/4
193/4
231/2
231/2
231/2
271/2
271/2
271/2
lbs
10
16
12
20
15
25
17
29
25
25
40
30
30
48
36
36
55
41
41
65
load
group
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
d1
0.48
0.63
0.48
0.63
0.48
0.63
0.48
0.63
0.48
0.63
0.63
0.48
0.63
0.63
0.48
0.63
0.63
0.48
0.63
0.63
E
31/8
51/8
71/8
71/8
71/8
1
11/8
1
11/8
1
11/8
1
11/8
1
11/8
11/8
1
11/8
11/8
1
11/8
11/8
1
11/8
11/8
A
6
8
85/8
85/8
85/8
B
2
3
41/4
41/4
41/4
C
111/4
111/4
111/4
H
2
4
57/8
57/8
57/8
lbs
2.9
5.3
10.9
10.9
10.9
SELECTION TABLE
OD 2.87- 73mm
Pipe clamps, clamp bases, OD 2.87 (ND 65/21/2), types 42, 43, 45, 46, 48, 49
permissible load (kN)
Type
210 480 660 840 930 950 985
42 07 17 1.12
950
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
985
B lbs
11/4 1.1
lbs
1.8
load
group
C-2
lbs
2.6
4.0
5.0
load
group
C-4
C-4
C-4
E
B
23/8 11/2
d2
0.48
load
group
C-2
Type
210
43 07 19 1.65
43 07 39
43 07 49
Type
45 07 19
45 07 11
45 07 12
45 07 19
45 07 11
45 07 12
45 07 19
45 07 11
45 07 12
45 07 19
45 07 11
45 07 12
E
d1
0.48 61/2
0.48 81/2
0.48 81/2
1075 1110F d3
0.81
0.81
1.00
1.1 0.8 0.81
1.7 1.3 0.81
2.9 2.2 1.00
EK
ER
1/
23/4
2
1 3
11/4 37/8
1/
23/4
2
1 33/8
11/4 41/2
B
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
B
11/2
2
2
L
113/4
113/4
113/4
153/4
153/4
153/4
193/4
193/4
193/4
231/2
231/2
231/2
load
lbs group
14 C-D
14 1-4
19 1-4
17 C-D
17 1-4
24 1-4
21 C-D
21 1-4
30 1-4
24 C-D
24 1-4
35 1-4
L
lbs
min. max. min. max.
133/4 291/2 15 32
133/4 291/2 16 41
133/4 291/2 21 57
14 291/2 15 33
14 291/2 20 42
14 291/2 24 58
load
group
C-4
C-4
3-5
C-4
C-4
3-5
Type 46
Type 48
13/8
A
6
8
85/8
85/8
85/8
B
C
21/8
31/8
41/4 111/4
41/4 111/4
41/4 111/4
H lbs
3.3
2
5.7
4
57/8 11.3
57/8 11.3
57/8 11.3
4.18
SELECTION TABLE
OD 3.00- 76.1mm
Temperature up to
1200F see page 4.46
Pipe clamps, clamp bases, OD 3.00 (ND 65/21/2), types 42, 43, 45, 46, 48, 49
lbs
1.2
load
group
C-2
E
d2
B
0.48 21/2 11/2
lbs
2.0
load
group
C-2
B
11/2
2
2
lbs
2.6
4.0
5.0
load
group
C-4
C-4
C-4
L
113/4
113/4
113/4
153/4
153/4
153/4
193/4
193/4
193/4
231/2
231/2
231/2
lbs
15
15
21
18
18
26
22
22
31
25
25
36
load
group
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
950
Type
45 08 19
45 08 11
45 08 12
45 08 19
45 08 11
45 08 12
45 08 19
45 08 11
45 08 12
45 08 19
45 08 11
45 08 12
Type 46
Type 48
13/8
1110F
0.49
d1
0.48
0.48
0.48
61/2
81/2
81/2
B
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
L
lbs
permissible load (lbs x 1000)
load
Type 210 480 660 840 930 950 985 1040 1075 1110F d3 EK ER min. max. min. max. group
4. 08 31
C-4
3.55 3.35 2.45 2.20 1.55 0.85
0.81 1/2 23/4 133/4 291/2 15 32
4. 08 32
C-4
4.70 4.45 3.35 2.90 2.20 1.30
0.81 1 3 133/4 291/2 15 41
4. 08 33
3-5
9.65 7.85 5.80 5.15 3.80 2.20
1.00 1 1 / 4 37/8 133/4 291/2 24 57
4. 08 41
C-4
0.8 0.81 1/2 23/4 14 291/2 15 33
1.5 1.1
4. 08 42
C-4
1.3 0.81 1 33/8 14 291/2 20 42
2.4 1.7
4. 08 43
3-5
2.2 1.00 11/4 41/2 14 291/2 29 60
4.0 2.9
Weights for Type 46 - for Type 48 approx. 14% less.
4.19
A
6
8
85/8
85/8
85/8
B
21/8
31/8
41/4
41/4
41/4
C
111/4
111/4
111/4
H lbs
2
3.3
4
5.7
57/8 11.3
57/8 11.3
57/8 11.3
SELECTION TABLE
OD 3.50- 88.9mm
Pipe clamps, clamp bases, OD 3.50 (ND 80/3), types 42, 43, 45, 46, 48, 49
lbs
1.3
load
group
C-2
B
11/2
lbs
2.2
load
group
C-2
lbs
3.1
3.1
4.2
4.2
5.4
load
group
C-D
1-4
C-D
1-4
C-4
950
Temperature up to
1200F see page 4.46
E
d2
0.48 23/4
Type
45 09 19
45 09 11
45 09 12
45 09 19
45 09 11
45 09 12
45 09 19
45 09 11
45 09 12
45 09 19
45 09 11
45 09 12
Type
4. 0931
4. 09 32
4. 09 33
4. 09 41
4. 09 42
4. 09 43
210
3.80
6.05
2.65
4.25
2.00
2.90
1.55
2.20
d1
0.48
0.63
0.48
0.63
0.48
E
63/4
63/4
91/4
91/4
91/4
11/2
11/2
2
2
2
B
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
23/4
23/4
4
L
113/4
113/4
113/4
173/4
173/4
173/4
231/2
231/2
231/2
291/2
291/2
291/2
1110F d3
0.81
0.81
1.00
0.8 0.81
1.3 0.81
2.2 1.00
EK
1/
2
1
13/8
1/
2
1
13/8
ER
3
33/8
37/8
3
37/8
41/8
load
lbs group
15 C-D
15 1-4
21 1-4
20 C-D
20 1-4
28 1-4
26 C-D
26 1-4
36 1-4
31 C-D
31 1-4
44 1-4
L
lbs
load
min. max. min. max. group
C-4
133/4 331/2 16 46
C-4
133/4 331/2 16 58
3-5
133/4 331/2 24 66
C-4
14 331/2 18 40
C-4
14 331/2 20 53
3-5
14 331/2 26 77
Type 46
Type 48
13/8
Type
49 09 11
49 09 12
49 09 25
49 09 35
49 09 45
E
A
33/4 6
53/4 8
95/8 105/8
95/8 105/8
95/8 105/8
B
23/8
33/8
53/4
53/4
53/4
C
131/4
131/4
131/4
H
2
4
77/8
77/8
77/8
lbs
5.1
8.4
17.4
17.4
17.4
4.20
SELECTION TABLE
OD 4.25- 108mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 4.25 (ND 100/4), types 42, 43, 45, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 10 19 2.20 1.70 1.30
E
d2
0.63 31/2
B
2
lbs
4.4
load
group
1-4
Type 210
43 10 19 2.20
43 10 29
43 10 38
43 10 39
43 10 49
Type
45 10 19
45 10 11
45 10 19
45 10 11
45 10 19
45 10 11
45 10 19
45 10 11
Type 46
0.56 0.50
2.45 2.20 1.55 1.35 0.95 0.50
1.35 0.99 0.74
Type 48
d1
0.63
0.48
0.48
0.63
0.63
d1
0.48
0.63
0.48
0.63
0.48
0.63
0.48
0.63
EK
ER
1/
23/4
4
1/
33/8
2
1 33/8
13/8 43/4
1/
37/8
2
1 43/8
13/8 51/8
E
1
11/8
1
11/8
1
11/8
1
11/8
load
group
1-4
C-4
C-D
1-4
1-4
8
91/2
101/2
101/2
101/2
B
2
11/2
2
2
23/4
lbs
5.5
2.9
6.6
6.6
9.0
B
31/8
31/8
31/8
31/8
31/8
31/8
31/8
31/8
load
L
lbs group
133/4 18 C-D
133/4 18 1-4
193/4 25 C-D
193/4 25 1-4
251/2 31 C-D
251/2 31 1-4
311/2 37 C-D
311/2 37 1-4
L
lbs
load
min. max. min. max. group
131/2 311/2 17 41
3-5
133/4 371/2 19 57
C-4
133/4 371/2 32 72
3-5
133/4 371/2 35 101
3-6
14 371/2 22 63
C-4
14 371/2 31 80
3-5
14 371/2 40 116
3-6
4.21
E
A
6 6
8 8
10 103/8
10 103/8
10 103/8
B
33/4
5
6
6
6
C
131/2
131/2
131/2
H
4
57/8
77/8
77/8
77/8
lbs
9
14
23
23
23
SELECTION TABLE
OD 4.50- 114.3mm
Pipe clamps, clamp bases, OD 4.50 (ND 100/4), types 42, 43, 45, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930
Type
42 11 19 2.20 1.70 1.30
950
985
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
E
d2
0.63 35/8
B
2
lbs
4.6
load
group
1-4
B
2
11/2
2
2
23/4
lbs
5.7
3.3
6.6
6.6
9.1
load
group
1-4
C-4
C-D
1-4
1-4
L
133/4
133/4
193/4
193/4
251/2
251/2
311/2
311/2
lbs
19
19
25
25
32
32
38
38
load
group
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
Type
45 11 19
45 11 11
45 11 19
45 11 11
45 11 19
45 11 11
45 11 19
45 11 11
Type
4. 1112
4. 11 31
4. 11 32
4. 11 33
4. 11 41
4. 11 42
4. 11 43
210
3.80
2.65
2.10
1.65
0.50
0.50
1.35 0.99
0.74
d1
0.63
0.48
0.48
0.63
0.63
EK
1/
4
1/
2
1
13/8
1/
2
1
13/8
ER
23/4
33/8
33/8
43/4
37/8
43/8
51/8
E
8
91/2
101/2
101/2
101/2
B
31/8
31/8
31/8
31/8
31/8
31/8
31/8
31/8
L
lbs
load
min. max. min. max. group
131/2 311/2 17 42
3-5
133/4 371/2 19 58
C-4
133/4 371/2 33 74
3-5
133/4 371/2 37 102 3-6
14 371/2 22 63
C-4
14 371/2 33 80
3-5
14 371/2 42 117 3-6
Type 46
Type 48
Type
210
49 11 11 0.50
49 11 12 0.70
49 11 25
49 11 35
49 11 45
B
33/4
5
6
6
6
C
131/2
131/2
131/2
H
4
57/8
77/8
77/8
77/8
lbs
9
14
23
23
23
4.22
SELECTION TABLE
OD 5.25- 133mm
Temperature up to
1200F see page 4.46
Pipe clamps, clamp bases, OD 5.25 (ND 125/5), types 42, 43, 45, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930
42 13 19 2.20 1.70 1.25
950
E
4
load
group
1-4
B
2
lbs
4.9
B
2
2
2
23/8
23/8
23/4
load
lbs group
6.2 1-4
5.1 C-D
5.1 1-4
8.6 C-D
8.6 1-4
12.0 1-4
Type
45 13 19
45 13 11
45 13 19
45 13 11
45 13 19
45 13 11
45 13 19
45 13 11
E
d1
0.63 83/4
0.48 101/2
0.63 101/2
0.48 111/2
0.63 111/2
0.63 111/2
B
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/2
L
153/4
153/4
211/2
211/2
271/2
271/2
331/2
331/2
lbs
24
24
31
31
38
38
45
45
load
group
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
Type 46
Type
4. 13 12
4. 13 31
4. 13 32
4. 13 33
4. 13 41
4. 13 42
4. 13 43
Type 48
EK
3/
8
1/
2
1/
4
1/
2
1/
2
1/
4
1/
2
1
1
1
1
ER
23/4
33/4
37/8
51/8
41/8
41/2
53/4
L
lbs
load
min. max. min. max. group
151/2 331/2 28 51 3-5
153/4 391/2 25 71 C-4
153/4 391/2 34 86 3-5
153/4 391/2 51 128 4-6
16 391/2 29 76 C-4
16 391/2 40 99 3-5
16 391/2 57 148 4-6
4.23
E
A
B
C
61/2 6 41/8
81/2 8 51/8
101/2 101/2 61/4 133/4
101/2 101/2 61/4 133/4
101/2 101/2 61/4 133/4
H
4
57/8
77/8
77/8
77/8
lbs
12
18
24
24
24
SELECTION TABLE
OD 5.50- 139.7mm
Pipe clamps, clamp bases, OD 5.50 (ND 125/5), types 42, 43, 45, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930
Type
42 14 19 2.20 1.65 1.15
950
Temperature up to
1200F see page 4.46
d2
0.63
lbs
5.3
load
group
1-4
Type
45 14 19
45 14 11
45 14 19
45 14 11
45 14 19
45 14 11
45 14 19
45 14 11
EK
3/
8
1/
2
1/
4
1/
2
1/
2
1/
4
1/
2
1
1
1
1
ER
23/4
33/4
37/8
51/8
41/8
41/2
53/4
d1
0.63
0.48
0.63
0.48
0.63
0.63
E
1
11/8
1
11/8
1
11/8
1
11/8
E
83/4
103/4
103/4
111/2
111/2
111/2
B
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/2
load
B lbs group
2
6.4 1-4
2
5.5 C-D
2
5.5 1-4
23/8 9.0 C-D
23/8 9.0 1-4
23/4 12.0 1-4
L
153/4
153/4
211/2
211/2
271/2
271/2
331/2
331/2
L
min. max.
151/2 331/2
153/4 391/2
153/4 391/2
153/4 391/2
16 391/2
16 391/2
16 391/2
lbs
24
24
32
32
39
39
45
45
load
group
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
lbs
load
min. max. group
56 3-5
21
71 C-4
26
86 3-5
37
47 128 4-6
77 C-4
31
44 103 3-5
57 146 4-6
Type 46
Type 48
0.55
0.99 0.74 0.55
A
E
63/4 6
83/4 8
105/8 101/2
105/8 101/2
105/8 101/2
B
C
41/8
51/8
61/4 133/4
61/4 133/4
61/4 133/4
H
4
57/8
77/8
77/8
77/8
lbs
12
19
25
25
25
4.24
SELECTION TABLE
OD 6.25- 159mm
Temperature up to
1200F see page 4.46
Pipe clamps, clamp bases, OD 6.25 (ND 150/6), types 42, 43, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 16 19 2.00 1.45 1.05
E
B
41/2 2
lbs
5.5
load
group
1-4
Type
4. 16 11
4. 16 12
4. 16 31
4. 16 32
4. 16 33
4. 16 41
4. 16 42
4. 16 43
Type 46
EK
1/
2
1/
2
1
11/2
2
1
11/2
2
ER
31/2
33/8
37/8
43/4
57/8
43/8
51/8
61/2
E
93/4
113/4
121/2
121/2
B
2
2
31/8
31/8
load
lbs group
6.8 1-4
7.5 1-4
15.2 1-4
18.0 1-4
L
lbs
min. max. min. max.
171/2 351/2 24 55
171/2 351/2 26 71
173/4 411/2 30 79
173/4 411/2 41 107
173/4 411/2 61 154
18 411/2 37 84
18 411/2 49 113
18 411/2 73 177
load
group
C-4
3-5
C-4
3-5
4-6
C-4
3-5
4-6
Type 48
21/2
Type
49 16 11
49 16 14
49 16 25
49 16 35
49 16 45
4.25
E
7
9
11
11
11
A
8
95/8
121/4
123/8
123/8
C
B
41/2
51/2 131/2
63/4 151/2
63/4 153/4
63/4 153/4
H lbs
15
4
57/8 24
77/8 28
77/8 28
77/8 28
SELECTION TABLE
OD 6.625- 168.3mm
Pipe clamps, clamp bases, OD 6.625 (ND 150/6), types 42, 43, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930
Type
42 17 19 1.90 1.40 1.00
950
Temperature up to
1200F see page 4.46
lbs
5.7
load
group
1-4
B lbs
2
7.1
2
7.9
31/8 16.1
31/8 19.0
load
group
1-4
1-4
1-4
1-4
B
2
d3
0.81
1.00
0.81
1.00
1.34
0.81
1.00
1.34
EK
1/
2
1/
2
1
11/2
2
1
11/2
2
ER
31/2
33/8
37/8
43/4
57/8
43/8
51/8
61/2
E
93/4
113/4
121/2
121/2
L
min. max.
171/2 351/2
171/2 351/2
173/4 411/2
173/4 411/2
173/4 411/2
18 411/2
18 411/2
18 411/2
lbs
load
min. max. group
25 55 C-4
42 72 3-5
31 80 C-4
47 107 3-5
64 163 4-6
37 85 C-4
51 117 3-5
75 179 4-6
Type 46
Type 48
21/2
Type
49 17 11
49 17 14
49 17 25
49 17 35
49 17 45
B
43/4
6
63/4
63/4
63/4
C
131/2
151/2
153/4
153/4
H
4
57/8
77/8
77/8
77/8
lbs
15
25
29
29
29
4.26
SELECTION TABLE
OD 7.625- 193.7mm
Temperature up to
1200F see page 4.46
Pipe clamps, clamp bases, OD 7.625 (ND 175/7), types 42, 43, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930 950
Type
42 19 19 1.55 1.20 0.85
985
E
B
51/2 2
lbs
6.4
load
group
1-4
lbs
10.3
9.3
23.8
23.8
34.0
load
group
1-5
1-5
1-3
3-6
3-6
Type 210
43 19 19 2.65
43 19 29
43 19 38
43 19 39
43 19 49
Type 46
Type 48
EK
1/
2
3/
4
1/
2
1/
4
1
1
11/4
11/2
2
1
11/4
11/2
2
ER
31/8
31/2
37/8
43/8
43/8
43/8
51/8
61/4
41/2
51/8
51/2
61/4
L
min.
191/2
191/2
193/4
193/4
213/4
213/4
213/4
213/4
211/2
211/2
211/2
211/2
B
2
2
23/4
23/4
37/8
lbs
load
max. min. max. group
371/2 31 63 C-4
371/2 38 92 3-5
391/2 31 70 C-4
391/2 44 94 3-5
451/2 36 87 C-4
451/2 56 118 3-5
451/2 69 139 3-5
451/2 100 208 4-7
451/2 44 92 C-4
451/2 62 128 3-5
451/2 82 172 3-5
451/2 119 241 4-7
21/2
4.27
C
131/2
137/8
153/4
161/4
161/4
H
4
57/8
77/8
97/8
97/8
lbs
22
31
31
47
48
SELECTION TABLE
OD 8.625- 219.1mm
Pipe clamps, clamp bases, OD 8.625 (ND 200/8), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930 950
42 22 19 1.55 1.15 0.80
Type
Temperature up to
1200F see page 4.46
985
E
d2
0.63 53/4
985
E
d1
0.63 111/2
0.63 141/2
lbs
6.8
load
group
1-4
B
2
2
lbs
11
12
load
group
1-5
1-5
lbs
24
19
30
48
23
33
52
load
group
3-6
C-4
4-6
5-8
C-4
4-6
5-8
B
2
33/8
35/8
33/4
43/4
37/8
37/8
51/8
Type 46
EK
1/
2
1
13/8
11/2
1
11/2
2
21/2
1
11/2
2
21/2
ER
41/8
43/8
43/4
57/8
51/8
57/8
63/4
77/8
51/8
61/8
71/4
77/8
L
min.
191/2
191/2
193/4
193/4
213/4
213/4
213/4
213/4
211/2
211/2
211/2
211/2
max.
431/2
431/2
471/2
471/2
471/2
471/2
471/2
471/2
53
53
53
53
lbs
load
min. max. group
34 87 C-4
52 119 3-5
46 122 3-5
55 160 4-6
41 109 C-4
72 173 3-5
93 218 4-7
134 313 5-8
49 120 C-4
86 207 3-5
106 252 4-7
154 369 5-8
Type 48
6431/8
A
95/8
101/8
123/8
123/8
123/8
B
51/8
61/8
81/4
81/4
81/4
C
133/4
141/4
153/4
161/4
161/4
H
4
57/8
97/8
97/8
97/8
lbs
26
33
37
49
50
4.28
SELECTION TABLE
OD 9.625- 244.5mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 9.625 (ND 225/9), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930
42 24 19 1.40 1.05 0.75
Type
950
d2
E
0.63 61/4
load
lbs group
7.3 1-4
B
2
1000)
930 950
2.0
5.3
8.5
1.9
5.1
7.8
d1
0.63
0.63
d3
1.34
1.80
0.81
1.34
1.80
0.81
1.34
1.80
1.7
4.0
6.5
11.5
1.1
2.4
3.8
2.0
4.0
7.4
1.3
3.1
5.3
1.1
2.4
3.8
E
121/4
151/4
E
113/4
13
151/2
151/2
151/2
151/4
151/4
151/4
B
2
2
lbs
13
13
load
group
1-5
1-5
lbs
19
27
20
33
51
24
36
55
load
group
3-6
5-8
C-4
4-6
5-8
C-4
4-6
5-8
27/8
31/8
35/8
33/4
43/4
37/8
37/8
51/8
Type 46
Type 48
64 31/8
L
ER
37/8
43/4
51/8
57/8
43/8
57/8
61/4
71/8
43/4
57/8
61/4
71/2
min.
191/2
191/2
213/4
213/4
213/4
213/4
213/4
213/4
211/2
211/2
211/2
211/2
max.
431/2
431/2
471/2
471/2
531/2
531/2
531/2
531/2
53
53
53
53
lbs
min. max.
42 104
63 137
55 134
74 171
48 124
81 186
103 237
150 340
57 134
95 224
119 275
172 397
load
group
3-5
4-6
3-5
4-6
3-5
3-5
4-7
5-8
3-5
3-5
4-7
5-8
Type
49 24 13
49 24 14
49 24 25
49 24 35
49 24 45
4.29
x 1000)
930 950 985 1040 1075 1110F
1.90
4.50 4.00 2.90 1.70
3.37 2.47
E
83/4
103/4
145/8
145/8
1.70 145/8
A
95/8
101/8
123/8
125/8
125/8
B
51/8
63/4
83/4
83/4
83/4
C
133/4
141/4
161/4
161/2
161/2
H
4
57/8
97/8
97/8
97/8
lbs
27
36
51
53
54
SELECTION TABLE
OD 10.50- 267mm
Pipe clamps, clamp bases, OD 10.50 (ND 250/10), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930 950
Type
42 26 19 1.45 1.10 0.75
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
d2
0.79
d1
E
0.63 131/2
0.95 131/2
0.95 161/4
B lbs
23/8 10
E
7
load
group
3-4
E
131/2
141/4
163/4
163/4
163/4
163/4
163/4
163/4
B
23/4
23/4
23/4
lbs
26
26
23
load
group
1-3
3-6
3-6
lbs
22
45
22
34
54
29
42
59
load
group
4-6
5-8
C-4
4-6
5-8
C-4
4-6
5-8
27/8
43/8
35/8
33/4
43/4
41/8
41/2
51/8
Type 46
x 1000)
930 950 985
2.25
5.40 4.75 3.40
1110F d3
1.00
1.34
1.00
1.34
1.00
1.00
1.60
1.80
1.7 1.00
3.3 1.00
4.7 1.60
8.0 1.80
EK
13/8
13/4
13/4
2
11/4
2
2
23/4
11/4
2
2
23/4
2.00
3.82 2.92
2.00
L
ER min. max.
41/8 211/2 451/2
51/8 211/2 451/2
51/2 233/4 511/2
57/8 233/4 511/2
43/4 233/4 551/2
57/8 233/4 551/2
61/4 233/4 551/2
71/4 233/4 551/2
51/2 231/2 55
67/8 231/2 55
61/2 231/2 55
81/8 231/2 55
E
91/4
111/8
151/8
151/8
151/8
A
93/4
105/8
131/2
133/4
133/4
B
61/4
63/4
9
9
9
lbs
load
min. max. group
52 122 3-5
69 155 4-6
65 160 3-5
79 212 4-6
69 144 3-5
93 207 3-5
119 262 4-7
174 378 5-8
79 165 3-5
112 247 3-5
143 304 4-7
203 444 5-8
C
141/4
151/2
173/4
18
18
H
4
57/8
97/8
97/8
97/8
Type 48
5
803 /8
lbs
36
47
61
62
63
4.30
SELECTION TABLE
OD 10.75- 273mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 10.75 (ND 250/10), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 27 19 1.40 1.05 0.75
d2
0.79
E
7
B
23/8
lbs
10
load
group
3-4
lbs
28
28
24
load
group
1-3
3-6
3-6
lbs
22
46
22
35
56
29
42
60
load
group
4-6
5-8
C-4
4-6
5-8
C-4
4-6
5-8
permissible load
210
480 660
Type
4.7 3.5
44 27 12 5.8
44 27 13 13.2 12.1 9.4
44 27 31
44 27 32
10.7
44 27 33
44 27 41
44 27 42
44 27 43
(lbs x 1000)
840 930 950
2.0
5.6
8.9
1.9
5.1
8.5
1.9
4.9
7.8
1.7
4.0
6.5
11.0
1.1
2.4
4.0
1.7
4.4
7.4
1.3
3.3
5.3
1.1
2.4
4.0
B
d1
E
0.63 131/2 23/4
0.95 131/2 23/4
0.95 161/4 23/4
d3
1.34
1.80
0.81
1.34
1.80
0.81
1.34
1.80
E
131/2
141/4
163/4
163/4
163/4
163/4
163/4
163/4
B
27/8
43/8
35/8
33/4
43/4
41/8
41/2
51/8
Type 46
Type 48
80 35/8
4.31
EK
13/8
13/4
13/4
2
11/4
2
2
23/4
11/4
2
2
23/4
x 1000)
930 950 985 1040 1075 1110F
ER
41/8
51/8
51/2
57/8
43/4
57/8
61/4
71/4
51/2
67/8
61/2
81/8
E
93/8
111/4
2.25
151/4
5.40 4.75 3.40 2.00
151/4
3.82 2.47 2.00 151/4
L
min. max.
211/2 451/2
211/2 451/2
233/4 511/2
233/4 511/2
233/4 551/2
233/4 551/2
233/4 551/2
233/4 551/2
231/2 55
231/2 55
231/2 55
231/2 55
A
93/4
105/8
131/2
133/4
133/4
B
61/4
63/4
9
9
9
lbs
load
min. max. group
61 125 3-5
72 157 4-6
69 163 3-5
88 213 4-6
70 145 3-5
95 209 3-5
121 264 4-7
181 381 5-8
82 167 3-5
115 248 3-5
146 307 4-7
212 453 5-8
C
141/4
151/2
173/4
18
18
H
4
57/8
97/8
97/8
97/8
lbs
36
47
61
62
63
SELECTION TABLE
OD 12.75- 323.9mm
Pipe clamps, clamp bases, OD 12.75 (ND 300/12), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 32 19 1.25 0.90 0.65
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
E
81/8
B lbs
23/8 12
load
group
3-4
d1
E
0.63 143/4
0.95 143/4
0.95 171/4
B lbs
31/8 35
31/8 35
23/4 33
load
group
1-3
3-6
3-6
Type 210
43 32 18 2.05
43 32 19 6.70
43 32 29
Type
210
44 32 12 8.3
44 32 13 15.7
44 32 31
44 32 32
44 32 33
44 32 41
44 32 42
44 32 43
Type 210
4.3211 6.7
4. 32 12 11.9
4. 32 13 18.8
4. 32 21
4. 32 22
4. 32 23
4. 32 31
4. 32 32
4. 32 33
4. 32 34
4. 32 35
4. 32 41
4. 32 42
4. 32 43
4. 32 44
4. 32 45
Weights for type 46 - for type 48 approx. 22%
985
L
1075 1110F d3
1.00
1.34
1.60
1.00
1.34
1.80
1.00
1.60
1.80
1.80
2.00
3.5 2.6 1.00
6.5 4.9 1.60
8.9 6.7 1.80
11.9 8.7 1.80
15.7 11.4 2.00
EK
13/8
11/2
21/4
11/4
11/4
11/4
2
2
2
2
2
2
2
2
2
2
ER
43/4
51/2
53/8
43/4
57/8
61/4
57/8
71/8
75/8
81/8
77/8
61/2
71/8
81/4
87/8
91/4
min.
231/2
231/2
231/2
271/2
271/2
271/2
273/4
273/4
273/4
273/4
311/2
271/2
271/2
271/2
271/2
311/2
B
31/8
41/2
43/8
41/2
61/2
41/2
51/8
63/4
lbs
36
64
44
60
107
49
68
116
load
group
5-8
6-9
3-5
5-7
5-8
3-5
5-7
5-8
lbs
load
max. min. max. group
70 128 3-5
471/2
97 176 4-6
471/2
471/2 133 239 5-7
74 137 3-5
511/2
511/2 109 206 4-6
511/2 143 266 5-8
551/2 101 189 3-5
551/2 153 286 4-7
551/2 188 360 5-8
551/2 225 429 5-8
551/2 295 510 6-9
123 235 3-5
55
185 341 4-7
55
218 423 5-8
55
258 499 5-8
55
344 598 6-9
55
Type 46
Type 48
9345/8
less.
H
4
77/8
97/8
97/8
97/8
lbs
41
65
67
69
72
4.32
SELECTION TABLE
OD 14- 355.6mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 14 (ND 350/14), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950 985
42 36 19 1.15 0.85 0.60
B
E
83/4 23/8
lbs
13
load
group
3-4
B
1075 1110F d1
E
0.63 151/4 31/2
0.95 151/4 31/2
0.95 181/2 31/2
lbs
42
42
45
load
group
1-3
3-6
3-6
lbs
45
71
47
70
113
53
72
120
load
group
6-8
6-9
3-5
5-7
5-8
3-5
5-7
5-8
985 1040
x 1000)
930 950
Type 46
Type 48
5
93 4 /8
L
EK
13/8
11/2
21/2
11/4
11/2
11/2
13/4
11/2
2
21/2
21/2
23/4
11/2
2
21/2
21/2
23/4
ER
43/4
51/8
53/4
41/2
51/2
61/8
61/4
53/8
61/4
71/8
81/8
9
61/8
63/4
71/2
91/2
95/8
4.33
E
153/4
161/2
191/8
191/8
191/8
191/8
191/8
191/8
min.
271/2
271/2
271/2
273/4
273/4
311/2
311/2
273/4
273/4
311/2
311/2
311/2
271/2
271/2
311/2
311/2
311/2
A
123/8
121/2
153/4
16
16
max.
511/2
511/2
511/2
551/2
551/2
551/2
551/2
591/2
591/2
591/2
591/2
591/2
59
59
59
59
59
B
33/8
41/2
43/8
43/4
61/2
41/2
51/8
63/4
lbs
load
min. max. group
105 166 4-6
131 228 4-6
154 283 6-8
67 144 3-5
103 172 4-6
161 294 5-7
180 342 6-9
103 195 3-5
128 245 4-6
190 337 4-7
261 482 5-8
355 620 6-9
123 228 3-5
150 286 4-6
231 407 4-7
302 561 5-8
414 747 6-9
B
9
91/4
101/4
11
11
C
H lbs
59
171/2 4
18
77/8 61
20
97/8 74
3
/
20 4 117/8 103
203/4 117/8 103
SELECTION TABLE
OD 14.50- 368mm
Pipe clamps, clamp bases, OD 14.50 (ND 350/14), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 37 19 1.10 0.85 0.60
985
Temperature up to
1200F see page 4.46
E
9
B
23/8
lbs
13
load
group
3-4
B
985 1040 1075 1110F d1
E
0.63 151/2 31/2
0.95 151/2 31/2
0.95 183/4 31/2
2.2
4.0
6.5
4.4
7.4
12.3
3.3
5.3
9.4
2.2
4.0
6,5
Type
210
4.3711 8.3
4. 37 12 14.8
4. 37 13 20.8
4. 37 21
4. 37 22
4. 37 23
4. 37 24
4. 37 31
4. 37 32
4. 37 33
4. 37 34
4. 37 35
4. 37 41
4. 37 42
4. 37 43
4. 37 44
4. 37 45
Weights for type 46 - for type 48 approx. 23% less.
3.60
6.74 4.95
E
111/4
151/8
171/8
19
3.60 19
load
group
1-3
3-6
3-6
E
153/4
161/2
191/4
191/4
191/4
191/4
191/4
191/4
load
B lbs group
33/8 45 6-8
41/2 71 6-9
43/8 47 3-5
43/4 69 5-7
61/2 115 5-8
41/2 54 3-5
51/8 73 5-7
63/4 122 5-8
L
min. max.
271/2 511/2
271/2 511/2
271/2 511/2
273/4 551/2
273/4 551/2
311/2 551/2
311/2 551/2
291/2 591/2
291/2 591/2
291/2 591/2
291/2 591/2
331/2 591/2
291/2 59
291/2 59
291/2 59
291/2 59
331/2 59
lbs
load
min. max. group
108 169 4-6
135 232 4-6
159 287 6-8
70 144 3-5
90 175 4-6
152 295 5-7
184 340 6-8
108 198 3-5
135 243 4-6
185 343 4-7
259 488 5-8
370 630 6-9
130 231 3-5
159 291 4-6
223 401 4-7
302 568 5-8
437 756 6-9
d3
1.80
2.00
1.00
1.60
1.80
1.00
1.60
1.80
ER
43/4
51/8
53/4
41/2
51/2
61/8
61/4
53/8
61/4
71/8
85/8
9
61/8
63/4
71/2
91/2
95/8
lbs
41
41
45
A
B
123/8 9
121/2 91/2
153/4 101/4
16 111/2
16 111/2
C
171/2
18
20
203/4
203/4
Type 46
Type 48
9345/8
H lbs
4
59
77/8 62
97/8 74
117/8 107
117/8 107
4.34
SELECTION TABLE
OD 16- 406.4mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 16 (ND 400/16), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 41 19 1.75 1.40 1.00
985 1040
1075 1110F
d2
0.95
E
10
B
23/4
lbs
21
load
group
3-5
B
4
4
4
lbs
51
51
54
load
group
1-3
3-6
3-6
Type 46
Type 48
118
55/8
2.2
5.1
8.5
4.2
9.2
13.9
3.1
6.7
10.3
Type
49 41 13
49 41 14
49 41 25
49 41 35
49 41 45
4.35
985
210
5.8
10.7
2.2
5.1
7.6
6.7
E
171/2
173/4
193/4
193/4
201/2
201/2
201/2
201/2
201/2
201/2
L
EK ER min.
11/4 61/8 311/2
11/2 61/4 311/2
21/4 67/8 311/2
11/2 53/4 311/2
11/2 57/8 311/2
2
71/8 331/2
1
2 /2 71/8 331/2
13/4 61/4 311/2
2
71/8 311/2
23/4 77/8 311/2
23/4 85/8 311/2
31/4 101/4 351/2
13/4 67/8 331/2
2
81/8 331/2
3
2 /4 87/8 331/2
23/4 87/8 331/2
31/4 101/2 351/2
4.5
9.0
d3
2.00
2.40
1.60
2.00
1.00
1.80
2.00
1.00
1.80
2.00
4.5
E
117/8
157/8
173/4
197/8
197/8
A
113/4
121/2
157/8
161/8
161/8
max.
551/2
551/2
551/2
591/2
591/2
591/2
591/2
631/2
631/2
631/2
631/2
631/2
63
63
63
63
63
B
101/4
91/2
103/4
113/4
113/4
B
35/8
51/4
45/8
51/4
43/8
53/4
57/8
41/2
53/4
71/4
load
lbs group
58 6-9
86 7-10
57 5-7
88 6-9
51 3-5
102 5-8
147 6-9
58 3-5
130 5-8
204 6-9
lbs
min. max.
138 211
168 286
228 362
104 192
136 223
207 349
237 414
137 244
194 343
252 448
310 550
465 820
170 300
238 417
291 520
366 645
551 939
load
group
4-6
5-7
6-8
3-5
4-6
5-7
6-8
3-5
4-7
5-8
5-8
6-9
3-5
4-7
5-8
5-8
6-9
C
H
173/4 4
19
77/8
21
97/8
3
/
21 4 117/8
213/4 117/8
lbs
86
91
109
146
146
SELECTION TABLE
OD 16.50- 419mm
Pipe clamps, clamp bases, OD 16.50 (ND 400/16), types 42, 43, 44, 46, 48, 49
permissible load(lbs x 1000)
210 480 660 840 930 950
42 42 19 1.75 1.35 0.95
Type
Temperature up to
1200F see page 4.46
d2
E
B
0.95 101/4 23/4
lbs
21
load
group
3-5
985 1040
Type
1075 1110F d1
E
0.63 17
0.95 17
0.95 193/4
1075 1110F d3
2.00
2.40
1.60
2.00
1.00
1.80
2.00
3.1 2.2 1.00
6.7 5.1 1.80
10.3 7.6 2.00
210
4.4211 9.8
4. 42 12 16.1
4. 42 13 24.7
4. 42 21
4. 42 22
4. 42 23
4. 42 24
4. 42 31
4. 42 32
4. 42 33
4. 42 34
4. 42 35
4. 42 41
4. 42 42
4. 42 43
4. 42 44
4. 42 45
Weights for type 46 - for type 48 approx. 21% less.
Type
49 42 13
49 42 14
49 42 25
49 42 35
49 42 45
x 1000)
930 950 985 1040 1075 1110F
5.2
12.8 11.4 8.5 4.9
9.4
7.2
4.9
E
121/4
161/8
181/8
201/8
201/8
E
171/2
18
193/4
193/4
203/4
203/4
203/4
203/4
203/4
203/4
L
min.
311/2
311/2
311/2
311/2
311/2
331/2
331/2
311/2
311/2
311/2
351/2
351/2
311/2
311/2
311/2
351/2
351/2
A
115/8
121/2
157/8
161/8
161/8
B
4
4
4
max.
551/2
551/2
551/2
591/2
591/2
591/2
591/2
631/2
631/2
631/2
631/2
631/2
63
63
63
63
63
B
91/2
91/2
103/4
113/4
113/4
B
35/8
63/8
45/8
53/4
43/8
53/4
57/8
41/2
53/4
71/4
lbs
51
51
54
load
group
1-3
3-6
3-6
lbs
59
148
58
104
52
101
150
59
130
215
load
group
6-9
7-10
5-7
6-9
3-5
5-8
6-9
3-5
5-8
6-9
lbs
min. max.
141 215
173 286
237 386
106 190
139 224
201 383
242 433
140 248
195 347
258 450
330 555
475 830
172 305
236 412
298 527
392 653
562 951
load
group
4-6
5-7
6-8
3-5
4-6
5-7
6-8
3-5
4-7
5-8
5-8
6-9
3-5
4-7
5-8
5-8
6-9
Type 46
Type 48
55/8
118
lbs
H
C
68
161/2 4
77/8 92
19
97/8 110
21
3
/
21 4 117/8 146
213/4 11 7/8 146
4.36
SELECTION TABLE
OD 18- 457.2mm
Temperature up to
1200F see page 4.46
Pipe clamps, clamp bases, OD 18 (ND 450/18), types 42, 43, 44, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930 950
42 46 19 1.70 1.30 0.90
Type
E
B
11 23/4
lbs
23
load
group
3-5
lbs
53
53
load
group
1-3
3-6
Type
210
44 46 12 13.2
44 46 13 15.7
44 46 15 33.7
44 46 22
44 46 23
44 46 25
44 46 31
44 46 32
44 46 35
44 46 36
44 46 41
44 46 42
44 46 45
44 46 46
Type
Type 46
Type 48
118
55/8
26.3
480
7.8
10.3
20.6
25.1
2.2
4.0
7.8
13.0
4.0 3.1 2.2
7.1 5.3 4.0
13.9 10.3 7.6
20.2 14.8 11.0
4.4611
4. 46 12
4. 46 13
4. 46 14
4. 46 21
4. 46 22
4. 46 23
4. 46 24
4. 46 31
4. 46 32
4. 46 33
4. 46 34
4. 46 35
4. 46 41
4. 46 42
4. 46 43
4. 46 44
4. 46 45
Weights for type 46 - for type 48 approx. 24% less.
Type
49 46 13
49 46 14
49 46 25
49 46 35
49 46 45
4.37
210
10.1
13.2
27.0
33.7
d3
1.34
1.60
1.80
2.00
1.34
1.60
1.80
2.00
1.60
1.80
1.80
2.00
2.40
1.60
1.80
1.80
2.00
2.40
EK
13/8
11/2
2
21/2
13/4
2
21/4
21/4
2
2
21/2
23/4
31/4
2
2
21/2
23/4
31/4
1075 1110F
8.1
5.8
d3
2.00
2.00
2.40
1.60
2.00
2.00
1.00
1.80
2.00
2.00
1.00
1.80
2.00
2.00
ER
57/8
61/8
63/4
71/4
61/4
63/4
71/4
77/8
71/8
71/2
87/8
95/8
97/8
75/8
81/4
91/4
111/2
111/2
E
13
167/8
187/8
203/4
203/4
B
4
4
E
181/2
181/2
19
211/4
211/4
211/4
22
22
22
22
22
22
22
22
L
min.
331/2
331/2
331/2
331/2
331/2
331/2
371/2
371/2
351/2
351/2
351/2
391/2
391/2
351/2
351/2
351/2
391/2
391/2
A
137/8
141/8
157/8
161/8
161/8
B
43/8
41/2
63/8
33/4
43/4
51/2
4
51/4
57/8
81/4
41/2
51/2
71/4
81/2
max.
571/2
571/2
571/2
571/2
631/2
631/2
631/2
631/2
671/2
671/2
671/2
671/2
671/2
67
67
67
67
67
B
91/2
101/4
111/2
123/4
123/4
load
lbs group
69 6-9
83 7-9
153 7-10
54 5-7
82 6-9
105 6-9
58 3-5
93 5-8
154 6-9
260 6-9
63 3-5
97 5-8
214 6-9
316 6-9
lbs
min. max.
161 252
176 293
303 411
315 515
149 235
193 340
320 545
345 555
233 391
270 449
365 610
620 990
660 1070
287 470
315 538
439 726
710 1175
796 1287
load
group
4-6
5-7
6-8
6-9
4-6
5-7
6-8
7-9
4-7
5-8
5-8
6-9
7-10
4-7
5-8
5-8
6-9
7-10
C
H lbs
19
4
82
193/4 77/8 113
21
97/8 117
3
21 /4 117/8 156
213/4 117/8 156
SELECTION TABLE
OD 20 - 508mm
Pipe clamps, clamp bases, OD 20 (ND 500/20), types 42, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 51 19 1.60 1.20 0.85
Temperature up to
1200F see page 4.46
E
12
B
23/4
lbs
25
load
group
3-5
B
31/8
31/8
35/8
63/8
83/4
4
4
43/4
61/2
5
53/4
73/8
73/4
51/8
53/4
75/8
91/4
lbs
58
63
83
155
275
63
71
97
172
84
113
183
260
94
141
240
412
load
group
1-4
4-6
6-9
7-10
8-30
3-5
5-7
6-9
7-10
3-5
5-8
6-9
7-10
3-5
5-8
6-9
7-10
d2
0.95
EK
13/8
11/2
21/2
21/2
2
21/2
21/2
21/2
21/2
23/4
31/4
31/4
31/2
21/2
23/4
31/4
31/4
31/2
(lbs x 1000)
930 950 985 1040 1075 1110F
7.6
17.7 16.6 12.3 7.2
15.3 11.2
7.2
ER
61/4
67/8
67/8
71/8
63/4
71/8
77/8
85/8
77/8
77/8
9
101/2
113/4
81/4
87/8
97/8
121/2
121/2
min.
351/2
351/2
351/2
351/2
371/2
371/2
411/2
411/2
391/2
391/2
391/2
411/2
411/2
391/2
391/2
391/2
411/2
411/2
E
14
177/8
213/4
213/4
213/4
L
max.
591/2
591/2
591/2
591/2
651/2
651/2
651/2
651/2
711/2
711/2
711/2
711/2
711/2
71
71
71
71
71
A
141/8
141/8
161/8
161/4
161/4
load
lbs
min. max. group
195 279 4-6
215 339 5-7
386 472 6-8
380 600 6-9
183 285 4-6
225 340 5-7
365 555 6-8
430 620 7-10
272 436 4-7
320 505 5-8
425 690 5-8
670 1105 6-9
785 1255 7-10
335 528 4-7
377 600 5-8
511 844 5-8
809 1310 6-9
957 1528 7-10
B
91/2
11
13
13
13
C
193/4
193/4
215/8
223/4
223/4
H
4
77/8
117/8
117/8
117/8
Type 46
Type 48
144
63/4
lbs
96
122
140
185
192
4.38
SELECTION TABLE
OD 22 - 558.8mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 22 (ND 550/22), types 42, 44, 46, 48, 49
lbs
53
load
group
5-6
lbs
77
94
106
164
290
75
105
113
184
116
200
265
370
152
269
331
458
load
group
3-6
5-8
6-9
7-10
8-30
4-6
6-9
6-9
7-10
5-8
6-9
7-10
7-10
5-8
6-9
7-10
7-10
Type 46
Type 48
144
63/4
4.4
8.9
12.3
18.0
8.9 6.5
14.1 10.5
20.2 14.8
28.5 21.1
4.4
7.8
11.2
15.7
d3
1.34
1.80
2.00
2.40
2.80
1.34
2.00
2.00
2.40
1.80
2.00
2.40
2.40
1.80
2.00
2.40
2.40
EK ER
11/2 6 3/4
2
71/4
21/2 75/8
21/2 81/8
21/4 71/8
21/2 71/2
21/2 81/8
21/2 91/2
21/2 77/8
21/2 9
23/4 91/2
31/2 103/4
4 121/2
21/2 87/8
21/2 85/8
23/4 101/4
31/2 111/4
4 141/4
E
21
21
21
21
211/2
233/4
233/4
233/4
233/4
241/2
241/2
241/2
241/2
241/2
241/2
241/2
241/2
L
min.
371/2
371/2
371/2
371/2
391/2
391/2
431/2
431/2
431/2
431/2
431/2
431/2
471/4
431/2
431/2
431/2
431/2
47
4.39
max.
611/2
611/2
611/2
611/2
671/2
671/2
671/2
671/2
75
75
75
75
75
75
75
75
75
75
B
33/8
41/4
41/2
63/8
83/4
4
43/4
51/4
61/2
51/2
73/8
73/4
85/8
53/4
75/8
81/8
95/8
lbs
min. max.
199 294
241 367
380 565
495 690
211 317
251 403
445 615
530 775
340 530
415 675
480 750
755 1220
1025 1515
412 641
507 773
593 932
915 1453
1260 1910
B
91/2
111/2
131/2
133/4
133/4
load
group
4-6
5-7
6-9
7-9
4-6
5-7
6-9
7-9
4-7
5-8
5-8
6-9
7-10
4-7
5-8
5-8
6-9
7-10
C
H
221/2 4
23
77/8
3
24 /8 117/8
25 117/8
251/2 117/8
lbs
160
202
206
257
267
SELECTION TABLE
OD 24 - 609.6mm
Pipe clamps, clamp bases, OD 24 (ND 600/24), types 42, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 61 19 3.80 2.90 2.05
Temperature up to
1200F see page 4.46
d2
E
1.20 143/4
B
31/2
lbs
57
load
group
5-6
lbs
92
105
125
174
300
97
113
169
198
144
222
320
405
169
264
465
537
load
group
3-6
6-9
6-9
7-10
8-30
4-7
6-9
7-10
7-10
5-8
6-9
7-10
8-30
5-8
6-9
7-10
8-30
Type
44 61 14
44 61 15
44 61 16
44 61 17
44 61 18
44 61 25
44 61 26
44 61 27
44 61 28
44 61 35
44 61 36
44 61 37
44 61 38
44 61 45
44 61 46
44 61 47
44 61 48
210
6.5
13.0
18.0
26.0
45.0
1075 1110F
6.5
10.3
19.3
25.6
4.4
7.6
13.4
19.1
EK
11/2
13/4
2
21/4
21/2
21/2
21/2
21/2
23/4
21/2
23/4
31/2
31/2
41/4
41/4
21/2
23/4
31/2
31/2
41/4
41/2
d3
1.34
2.00
2.00
2.40
2.80
1.60
2.00
2.40
2.40
1.80
2.00
2.40
2.80
1.80
2.00
2.40
2.80
ER
71/4
75/8
71/2
81/8
9
71/2
85/8
91/4
101/2
85/8
91/4
11
111/4
123/4
141/4
9
103/4
11
111/2
14
141/4
E
22
22
22
22
223/4
251/2
251/2
251/2
251/2
27
27
27
27
27
27
27
27
L
min.
391/2
391/2
391/2
391/2
391/2
431/2
431/2
431/2
451/4
471/4
471/4
471/4
511/4
51 1/4
511/4
47
47
47
51
51
51
max.
631/2
631/2
631/2
631/2
631/2
711/2
711/2
711/2
711/2
79
79
79
79
79
79
79
79
79
79
79
79
41/2
37/8
43/4
63/8
83/4
43/4
43/4
55/8
61/2
61/2
73/8
81/4
85/8
61/4
75/8
95/8
95/8
lbs
min. max.
270 386
337 477
435 615
540 720
605 855
285 454
460 650
565 840
710 1005
390 595
550 830
650 975
880 1325
1160 1665
1385 2000
470 701
670 1027
811 1203
1080 1573
1440 2114
1706 2506
B
103/4
121/4
141/4
141/2
141/2
C
H
221/2 57/8
23
77/8
3
24 /8 117/8
25 117/8
251/2 117/8
load
group
4-7
6-8
6-9
7-9
7-10
4-7
6-9
7-9
8-10
4-7
5-8
5-8
6-9
7-10
8-30
4-7
5-8
5-8
6-9
7-10
8-30
Type 46
Type 48
7/
7172
8
lbs
181
217
219
271
284
4.40
SELECTION TABLE
OD 26 - 660.4mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 26 (ND 650/26), types 42, 44, 46, 48, 49
Type
44 66 14
44 66 15
44 66 16
44 66 17
44 66 18
44 66 19
44 66 25
44 66 26
44 66 27
44 66 28
44 66 35
44 66 36
44 66 37
44 66 38
44 66 45
44 66 46
44 66 47
44 66 48
Type 48
172
87/
480
6.2
9.8
14.6
21.3
30.3
54.0
1075 1110F
6.5
13.0
19.7
25.8
4.4
9.4
13.4
19.3
d3
1.60
2.00
2.00
2.40
2.80
2.80
1.60
2.00
2.40
2.80
1.80
2.00
2.40
2.80
1.80
2.00
2.40
2.80
E
24
24
24
24
24
25
263/4
263/4
263/4
263/4
271/2
271/2
271/2
271/2
271/2
271/2
271/2
271/2
ER
77/8
81/2
77/8
95/8
91/4
85/8
95/8
101/4
103/4
87/8
95/8
111/2
12
121/2
14
91/4
111/4
111/2
121/2
133/4
141/4
L
min.
411/2
411/2
411/2
411/2
411/2
491/4
491/4
491/4
51
491/4
491/4
491/4
491/4
531/4
531/4
49
49
49
49
53
53
A
153/4
157/8
173/4
18
18
Type
Type 46
210
7.8
12.5
18.4
28.7
40.2
68.3
B
E
153/4 31/2
210
13.4
20.2
30.3
48.3
57.5
480
10.3
15.7
22.4
34.8
42.6
EK
11/2
2
21/4
21/2
23/4
21/2
21/2
23/4
31/4
21/2
21/2
31/2
31/2
4
41/4
21/2
21/2
31/2
31/2
4
41/4
B
41/2
41/2
63/8
63/8
81/4
9
43/4
51/4
61/4
73/4
61/2
73/4
81/4
85/8
61/4
81/8
95/8
95/8
lbs
62
load
group
5-6
lbs
100
122
180
191
285
405
99
126
187
305
153
285
330
425
178
349
483
550
load
group
4-7
6-9
6-9
7-10
8-30
9-30
4-7
6-9
7-10
8-30
5-8
6-9
7-10
8-30
5-8
6-9
7-10
8-30
lbs
max. min. max.
651/2 308 414
651/2 410 520
651/2 510 665
651/2 680 920
651/2 785 990
75 340 550
75 525 710
75 660 960
75 765 1120
81 460 680
81 595 875
81 725 1100
81 970 1435
81 1255 1790
81 1500 2135
81 540 808
81 739 1091
81 893 1306
81 1135 1710
81 1554 2249
81 1841 2664
load
group
5-7
6-8
6-9
7-10
8-10
4-7
6-9
7-9
8-10
4-7
5-8
5-8
6-9
7-10
8-30
4-7
5-8
5-8
6-9
7-10
8-30
4.41
B
113/4
13
141/2
15
15
C
221/2
23
241/2
253/8
251/2
H
57/8
77/8
117/8
117/8
117/8
lbs
195
230
252
284
302
SELECTION TABLE
OD 28 - 711.2mm
Pipe clamps, clamp bases, OD 28 (ND 700/28), types 42, 44, 46, 48, 49
Type
42 71 19
Type
44 71 14
44 71 15
44 71 16
44 71 17
44 71 18
44 71 19
44 71 25
44 71 26
44 71 27
44 71 28
44 71 29
44 71 35
44 71 36
44 71 37
44 71 38
44 71 39
44 71 45
44 71 46
44 71 47
44 71 48
Type
4.7111
4. 71 12
4. 71 13
4. 71 14
4. 71 15
4. 71 21
4. 71 22
4. 71 23
4. 71 24
4. 71 31
4. 71 32
4. 71 33
4. 71 34
4. 71 35
4. 71 36
4. 71 41
4. 71 42
4. 71 43
4. 71 44
4. 71 45
4. 71 46
210
9.6
21.3
27.8
33.7
39.7
69.0
210
16.6
26.5
40.4
53.0
61.8
d2
1.20
d3
1.60
2.00
2.40
2.80
2.80
2.80
1.60
2.00
2.40
2.80
2.80
1.80
2.00
2.40
2.80
2.80
1.80
2.00
2.40
2.80
7.8 5.6
13.9 8.9
19.1 13.4
28.0 18.0
38.2 24.0
9.4 6.9
20.0 14.8
28.5 21.1
53.7 35.0 25.8
permissible load
Type
210 480 660 840
49 71 13 19.1 15.0 11.0
49 71 14 29.2 22.4 16.1
49 71 25
20.6 18.4
49 71 35
33.7
49 71 45
Temperature up to
1200F see page 4.46
5.1
10.5
15.2
19.3
d3
1.60
1.80
2.00
2.00
2.40
1.80
2.00
2.00
2.40
1.60
1.80
2.00
2.00
2.40
2.80
1.60
1.80
2.00
2.00
2.40
2.80
EK
13/4
21/4
21/2
31/4
31/2
23/4
23/4
23/4
31/2
23/4
23/4
4
4
4
51/4
23/4
23/4
4
4
4
51/4
(lbs x 1000)
930 950 985 1040 1075 1110F
14.6
31.9 30.3 22.2 13.0
24.3 18.2
13.0
ER
75/8
91/2
87/8
9
81/2
85/8
91/2
97/8
11
91/4
97/8
111/4
12
131/4
131/2
91/2
111/2
12
121/2
14
141/2
E
B
24 3/4 55/8
24 3/4 63/8
24 3/4 65/8
24 3/4 71/8
24 3/4 83/4
25 1/2 91/4
28 1/2 43/4
28 1/2 51/2
28 1/2 57/8
28 1/2 61/2
28 1/2 73/4
29 1/8 61/2
29 1/8 73/8
29 1/8 81/4
29 1/8 85/8
29 1/8 10
29 1/8 63/4
29 1/8 81/2
29 1/8 10
29 1/8 95/8
L
min.
43 1/2
43 1/2
431/2
431/2
431/2
491/4
491/4
531/4
531/4
511/4
511/4
511/4
551/4
551/4
571/4
51
51
51
55
55
57
E
20
217/8
253/4
253/4
253/4
B
31/2
E
17
max.
671/2
671/2
671/2
671/2
671/2
79
79
79
79
83
83
83
83
83
83
821/2
821/2
821/2
821/2
821/2
821/2
A
153/4
157/8
177/8
18
18
lbs
66
load
group
5-6
lbs
154
196
211
239
330
430
117
144
202
235
320
169
242
350
440
560
213
392
528
576
load
group
4-7
6-9
7-10
8-30
8-30
9-30
5-7
6-9
7-10
8-30
8-30
5-8
6-9
7-10
8-30
9-30
5-8
6-9
7-10
8-30
lbs
min. max.
374 496
490 680
605 870
780 1030
1020 1100
420 615
570 795
760 1055
925 1240
500 730
655 940
905 1325
1095 1535
1365 1910
1700 2360
631 907
802 1169
1096 1601
1283 1824
1689 2403
2081 2925
B
121/2
133/4
151/2
161/4
161/4
C
221/2
23
25
253/8
251/2
H
57/8
77/8
117/8
117/8
117/8
load
group
5-7
6-8
7-9
7-9
8-10
5-8
6-9
7-9
8-10
4-7
5-8
6-9
6-9
7-10
8-30
4-7
5-8
6-9
6-9
7-10
8-30
Type 46
Type 48
172
87/8
lbs
207
245
270
305
326
4.42
SELECTION TABLE
OD 30 - 762mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 30 (ND 750/30), types 42, 44, 46, 48, 49
Type 46
Type 48
198
97/
Type
44 76 14
44 76 15
44 76 16
44 76 17
44 76 18
44 76 19
44 76 25
44 76 26
44 76 27
44 76 28
44 76 29
44 76 35
44 76 36
44 76 37
44 76 38
44 76 39
44 76 45
44 76 46
44 76 47
44 76 48
44 76 49
Type
4.7611
4. 76 12
4. 76 13
4. 76 14
4. 76 15
4. 76 21
4. 76 22
4. 76 23
4. 76 24
4. 76 31
4. 76 32
4. 76 33
4. 76 34
4. 76 35
4. 76 36
4. 76 41
4. 76 42
4. 76 43
4. 76 44
4. 76 45
4. 76 46
210
12.1
18.6
25.8
33.7
43.8
69.0
480
9.4
15.0
19.7
25.8
34.8
50.5
5.8
8.9
13.4
20.2
26.7
11.2
20.2
28.5
51.7 35.5
75.3 48.3
210
16.6
27.0
41.1
55.0
69.6
480
12.8
20.4
30.3
40.4
51.6
8.5
14.8
20.9
26.0
35.7
6.0
10.5
15.2
19.3
26.7
d3
1.60
2.00
2.40
2.80
2.80
2.80
2.00
2.40
2.80
2.80
2.80
1.80
2.00
2.40
2.80
2.80
1.80
2.00
2.40
2.80
2.80
EK ER
13/4 8 1/2
21/4 8 1/2
21/2 9 5/8
31/4 10 1/4
31/2 10
23/4 9 7/8
23/4 9 7/8
31/4 113/4
31/2 11 3/4
31/4 10 1/4
31/4 10 3/4
4 12 1/4
4 13
41/4 14 1/4
51/2 15 3/4
31/4 10 3/4
31/4 11 1/4
4 13 1/4
4 13 1/2
41/4 14 1/4
51/2 17
L
min.
451/4
451/4
451/4
451/4
451/4
551/4
551/4
591/4
591/4
591/4
591/4
591/4
591/4
591/4
63
59
59
59
59
59
63
E
26 1/2
26 1/2
26 1/2
26 1/2
26 1/2
27 1/4
30
30
30
30
30
30 1/4
30 1/4
30 1/4
30 1/4
301/4
301/4
301/4
301/4
301/4
301/4
B
61/8
63/8
65/8
71/8
83/4
91/4
51/2
57/8
61/2
73/4
85/8
63/4
73/8
81/4
87/8
10
75/8
81/2
10
10
107/8
max.
69 1/2
69 1/2
69 1/2
69 1/2
69 1/2
87
87
87
87
91
91
91
91
91
91
90 1/2
90 1/2
90 1/2
90 1/2
90 1/2
90 1/2
4.43
B lbs
31/2 68
E
18
B
13 1/2
14 1/2
15 3/4
16 1/2
16 1/2
load
lbs group
182 4-7
199 6-9
215 7-10
248 8-30
355 8-30
450 9-30
154 6-9
210 7-10
265 8-30
330 8-30
460 9-30
189 5-8
275 6-9
370 7-10
480 8-30
650 9-30
297 5-8
413 6-9
549 7-10
628 8-30
789 9-30
lbs
min. max.
410 530
535 745
790 920
990 1090
1110 1290
485 765
660 960
890 1230
1150 1545
640 905
770 1085
1040 1485
1240 1745
1535 2175
2115 2860
798 1098
948 1344
1268 1772
1484 2081
1956 2733
2641 3583
C
23 1/4
23
25
25 3/8
25 1/2
load
group
5-6
H
5 7/8
77/8
117/8
117/8
117/8
load
group
5-7
6-8
7-9
7-9
8-10
5-8
6-9
7-9
8-10
4-7
5-8
6-9
6-9
7-10
8-30
4-7
5-8
6-9
6-9
7-10
8-30
lbs
236
260
304
316
348
SELECTION TABLE
OD 32 - 812.8mm
Pipe clamps, clamp bases, OD 32 (ND 800/32), types 42, 44, 46, 48, 49
permissible load (lbs x 1000)
Type
210 480 660 840 930 950
42 81 19 3.10 2.20 1.65
Type
44 81 14
44 81 15
44 81 16
44 81 17
44 81 18
44 81 19
44 81 25
44 81 26
44 81 27
44 81 28
44 81 29
44 81 35
44 81 36
44 81 37
44 81 38
44 81 39
44 81 45
44 81 46
44 81 47
44 81 48
Type
4.8111
4. 81 12
4. 81 13
4. 81 14
4. 81 15
4. 81 21
4. 81 22
4. 81 23
4. 81 24
4. 81 31
4. 81 32
4. 81 33
4. 81 34
4. 81 35
4. 81 36
4. 81 41
4. 81 42
4. 81 43
4. 81 44
4. 81 45
4. 81 46
210
12.1
20.2
27.4
34.3
46.0
69.0
210
20.2
30.3
47.6
62.0
74.0
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
d2
1.20
E
19
B
31/2
lbs
73
load
group
5-6
d3
1.60
2.00
2.40
2.80
2.80
2.80
2.00
2.40
2.80
2.80
2.80
2.00
2.40
2.80
2.80
2.80
2.00
2.40
2.80
2.80
E
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
28 1/2
31 1/8
31 1/8
31 1/8
31 1/8
31 1/8
32
32
32
32
32
32
32
32
32
B
61/8
63/8
65/8
71/8
83/4
91/4
51/2
57/8
63/4
73/4
85/8
73/8
81/4
87/8
85/8
10
81/2
10
10
111/4
lbs
196
213
230
270
360
475
165
228
270
345
485
275
390
500
570
685
429
571
661
865
load
group
4-7
6-9
7-10
8-30
8-30
9-30
6-9
7-10
8-30
8-30
9-30
6-9
7-10
8-30
8-30
9-30
6-9
7-10
8-30
9-30
14.0
19.1
28.0
33.7
40.4
8.9
13.4
19.1
22.4
26.5
19.1
28.3
49.7 35.5
74.6 48.7
14.3
20.6
25.8
36.1
10.1
15.2
19.3
26.7
EK
13/4
21/2
23/4
31/2
4
31/4
31/4
31/2
4
31/2
31/2
4
41/4
43/4
6
31/2
31/2
4
41/4
43/4
6
ER
81/2
91/2
10
95/8
101/2
97/8
97/8
121/2
121/2
11
113/4
13
133/4
141/2
161/4
111/2
113/4
131/2
133/4
141/2
181/4
E
217/8
237/8
273/4
273/4
273/4
L
min. max.
471/4 711/2
471/4 711/2
471/4 711/2
471/4 711/2
471/4 711/2
591/4 91
591/4 91
63 91
63 91
63 95
63 95
63 95
63 95
63 95
63 95
63 941/2
63 941/2
63 941/2
63 941/2
63 941/2
63 941/2
lbs
min. max.
510 640
700 810
890 1135
1215 1380
1310 1530
540 855
730 1060
1070 1420
1385 1820
790 1070
915 1305
1140 1610
1370 1855
1695 2345
2390 3420
961 1325
1160 1571
1400 1928
1653 2262
2167 2960
2998 4171
load
group
5-8
6-9
7-10
8-10
9-30
5-8
6-9
7-10
8-30
5-8
5-8
6-9
6-9
7-10
8-30
5-8
5-8
6-9
6-9
7-10
8-30
B
141/4
153/4
163/4
163/4
163/4
C
H
23 1/8 5 7/8
23
77/8
25
117/8
3
25 /8 117/8
25 1/2 117/8
lbs
247
277
321
328
370
A
15 7/8
15 7/8
17 3/4
18
18
Type 46
Type 48
198
97/8
4.44
SELECTION TABLE
OD 36 - 914.4mm
Temperature up to
1200F see page 4.46
Twice the specified load is possible
by use of type 77 (see page 4.55)
Pipe clamps, clamp bases, OD 36 (ND 900/36), types 42, 44, 46, 48, 49
permissible load (lbs x 1000)
210 480 660 840 930 950 985 1040 1075 1110F d2
42 91 19 3.10 2.20 1.70
1.20
Type
Type
Type 46
44 91 14
44 91 15
44 91 16
44 91 17
44 91 18
44 91 19
44 91 25
44 91 26
44 91 27
44 91 28
44 91 29
44 91 35
44 91 36
44 91 37
44 91 38
44 91 46
44 91 47
44 91 48
Type
Type 48
225
11
4.9111
4. 91 12
4. 91 13
4. 91 14
4. 91 15
4. 91 21
4. 91 22
4. 91 23
4. 91 24
4. 91 25
4. 91 31
4. 91 32
4. 91 33
4. 91 34
4. 91 35
4. 91 36
4. 91 41
4. 91 42
4. 91 43
4. 91 44
4. 91 45
4. 91 46
210
11.4
19.7
34.3
46.0
57.0
69.0
13.4
18.0
23.1
26.7
28.5 21.1
49.9 35.5 25.8
74.6 49.0 36.1
210 480
21.5 16.0
30.3 22.4
48.3 34.8
63.0 46.0
75.2 55.0
15.2
19.3
26.7
EK
2
21/2
23/4
31/2
4
31/4
31/2
4
4
41/4
4
41/4
41/4
51/4
51/4
61/4
4
41/4
41/4
51/4
51/4
61/4
4.45
d3
1.60
2.00
2.40
2.80
2.80
2.80
2.00
2.80
2.80
2.80
2.80
2.40
2.80
2.80
2.80
2.40
2.80
2.80
ER
10
91/2
91/2
101/2
111/2
97/8
103/4
113/4
123/4
131/2
113/4
13
133/4
151/4
18
171/4
113/4
131/2
141/2
171/2
171/2
191/4
E
21
B
4
lbs
88
load
group
5-6
E
30
30
30
30
30
31
33
33
33
33
33
34 1/4
34 1/4
34 1/4
34 1/4
34 1/4
34 1/4
34 1/4
B
6 1/8
6 3/8
77/8
83/4
9
91/4
57/8
63/4
73/4
85/8
85/8
81/4
87/8
85/8
10
10
10
111/4
lbs
213
234
300
395
480
520
250
300
380
505
535
435
545
625
745
636
727
926
load
group
4-7
6-9
7-10
8-30
8-30
9-30
7-9
8-30
8-30
9-30
9-30
7-10
8-30
9-30
9-30
7-10
8-30
9-30
L
min. max.
51 75
51 75
51 75
51 75
51 75
63 95
63 95
63 95
63 95
63 95
67 98 1/2
67 98 1/2
67 98 1/2
67 98 1/2
71 98 1/2
71 98 1/2
67 98 1/2
67 98 1/2
67 98 1/2
67 98 1/2
71 98 1/2
71 98 1/2
E
24
257/8
293/4
293/4
293/4
A
177/8
18
20
20
20
lbs
min. max.
620 755
810 975
1190 1295
1385 1580
1660 1655
675 915
870 1255
1180 1570
1510 1980
1695 2285
985 1315
1280 1725
1565 2100
2175 2850
2840 3795
3210 4185
1215 1633
1537 2088
1885 2560
2701 3672
3510 4640
3944 5313
B
14 1/4
16 1/2
17 3/4
19
19
C
25 1/2
26
28
28
28
H
5 7/8
77/8
117/8
117/8
117/8
load
group
5-8
6-9
7-10
8-10
9-30
5-8
6-9
7-10
8-30
9-30
5-8
5-8
6-9
7-10
8-30
9-30
5-8
5-8
6-9
7-10
8-30
9-30
lbs
294
355
375
430
463
SELECTION TABLE
OD 1.33 - 3.50, TEMPERATURE 1130-1200F
Pipe clamps, OD 1.33 (ND 25/1), type 43
Type
43 03 59
1200F
0.40
d1
0.48
E
91/4
B
2
lbs
3.0
load
group
C-2
d1
0.48
E
91/2
B
2
lbs
3.2
load
group
C-2
d1
0.48
E
91/2
B
2
lbs
3.2
load
group
C-2
1200F
0.40
1200F
0.40
Type 43
1200F
0.52
d1
0.48
E
97/8
B
21/8
lbs
5.3
load
group
C-4
d1
0.48
E
10
lbs
5.5
load
group
C-4
1200F
0.52
d3
0.81
0.81
1.00
ER
2 3/4
2 3/4
3 7/8
dN
1 3/8
1 3/8
1 3/8
23/8
L
min. max.
14 29 1/2
14 29 1/2
14 29 1/2
lbs
min. max.
13 29
15 33
20 46
load
group
C-4
C-4
3-5
Type 48
1200F
0.52
dN
1 3/8
1 3/8
1 3/8
d1
0.48
ER
2 3/4
2 3/4
3 7/8
E
10
L
min. max.
14 29 1/2
14 29 1/2
14 29 1/2
lbs
5.6
load
group
C-4
lbs
min. max.
13 29
15 33
20 46
load
group
C-4
C-4
3-5
B
23/8
1200F
0.52
d3
dN
0.81 1 3/8
0.81 1 3/8
1.00 1 3/8
d1
0.48
ER
3
3 3/8
3 7/8
E
101/4
L
min. max.
14 33 1/2
14 33 1/2
14 33 1/2
lbs
5.9
load
group
C-4
lbs
min. max.
13 35
15 42
20 57
load
group
C-4
C-4
3-5
B
23/4
4.46
SELECTION TABLE
OD 4.25 - 6.25, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 4.25 (ND 100/4), types 43, 48
Type
43 10 59
Type
48 10 51
48 10 52
48 10 53
1200F
1.12
dN
2
2
2
d1
0.63
E
101/2
L
min.
14
14
14
ER
3 3/8
3 3/4
5 1/2
B
23/4
lbs
11.2
lbs
min. max.
18 53
22 62
31 93
max.
37 1/2
37 1/2
37 1/2
load
group
1-4
load
group
C-4
3-5
3-6
Type
Type 43
48 11 51
48 11 52
48 11 53
1130
2.00
d1
0.63
E
103/4
L
dN
2
2
2
ER
3 3/8
3 3/4
5 1/2
max.
37 1/2
37 1/2
37 1/2
min.
14
14
14
B
23/4
lbs
11.4
lbs
min. max.
53
18
62
22
93
31
load
group
1-4
load
group
C-4
3-5
3-6
1130
2.25
Type 48
d1
0.63
E
111/2
B
31/8
L
dN
2
2
2
ER
3 3/4
4 3/8
5 7/8
lbs
max.
39 1/2
39 1/2
39 1/2
min.
16
16
16
lbs
11.7
max.
60
75
108
min.
22
26
37
load
group
1-4
load
group
C-4
3-5
4-6
1130
2.25
d1
0.63
E
111/2
B
31/8
L
dN
2
2
2
ER
3 3/4
4 3/8
5 7/8
lbs
18.1
lbs
max.
39 1/2
39 1/2
39 1/2
min.
16
16
16
max.
62
77
108
min.
22
29
40
load
group
1-4
load
group
C-4
3-5
4-6
1130
2.25
4.47
d1
0.63
E
121/2
B
31/8
L
dN
21/2
21/2
21/2
ER
3 7/8
4 7/8
5 7/8
min.
18
18
18
lbs
19.5
lbs
max.
41 1/2
41 1/2
41 1/2
min.
26
35
51
max.
68
90
132
load
group
1-4
load
group
C-4
3-5
4-6
SELECTION TABLE
OD 6.625 - 9.625, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 6.625 (ND 150/6), types 43, 48
Type
43 17 59
1200F
1.26
d1
0.63
E
121/2
lbs
20
load
group
1-4
max.
68
93
132
load
group
C-4
3-5
4-6
lbs
35
load
group
3-6
max.
73
101
123
181
load
group
C-4
3-5
3-5
4-7
lbs
46
79
123
load
group
C-4
4-6
5-8
max.
112
157
190
271
load
group
C-4
3-5
4-7
5-8
B
31/8
4
Type 43
Type
48 17 51
48 17 52
48 17 53
1130
2.7
4.2
8.1
L
dN
2 1/2
2 1/2
2 1/2
d3
0.81
1.00
1.34
lbs
max.
411/2
411/2
411/2
ER min.
3 7/8 18
4 7/8 18
5 7/8 18
min.
26
35
51
1200F
2.02
d1
0.79
B
37/8
E
14
L
d3
0.81
1.00
1.00
1.60
dN
2
2
2
2
1/
2
1/
2
1/
2
1/
2
min.
21 1/2
21 1/2
21 1/2
21 1/2
ER
4 3/8
4 7/8
5 7/8
6 1/4
lbs
max.
45 1/2
45 1/2
45 1/2
45 1/2
min.
35
46
55
84
Type 44
1130
1.8
4.2
6.7
d3
0.81
1.34
1.80
E
16 7/8
18 1/8
19 1/8
max
B
4 1/2
4 1/8
6 1/2
max
ISO
11
11
11
L
d3
0.81
1.00
1.60
1.80
dN
3 1/8
3 1/8
3 1/8
3 1/8
min.
21 1/2
21 1/2
21 1/2
21 1/2
ER
5 1/8
5 7/8
6 3/4
7 7/8
lbs
max.
53
53
53
53
min.
40
57
71
106
Type 48
1130
1.8
4.2
6.7
d3
0.81
1.34
1.80
E
17 3/8
18 3/4
19 5/8
max
B
4 3/4
4 1/8
6 3/4
max
ISO
11
11
11
L
d3
1.00
1.00
1.60
1.80
dN
3 1/8
3 1/8
3 1/8
3 1/8
ER
4 3/8
5 7/8
6 1/4
7 1/8
min.
21 1/2
21 1/2
21 1/2
21 1/2
max.
53
53
53
53
min.
44
62
82
110
lbs
50
82
131
lbs
max.
123
165
209
287
load
group
C-4
4-6
5-8
load
group
3-5
3-5
4-7
5-8
4.48
SELECTION TABLE
OD 10.50 - 12.75, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 10.50 ND 250/10), types 44, 48
Type
44 26 51
44 26 52
44 26 53
1130
1.8
4.2
6.9
permissible load
1130 1148 1166 1184
48 26 51
3.1 2.7 2.4 2.0
48 26 52
5.8 4.9 4.5 3.8
48 26 53
8.3 7.2 6.5 5.4
48 26 54 14.6 12.5 11.2 9.4
Type
(lbs x 1000)
1200F d3
1.8
1.00
3.3
1.00
4.7
1.60
8.1
1.80
d3
0.81
1.34
1.80
dN
3 5/8
3 5/8
3 5/8
3 5/8
E
17 7/8
19 1/8
19 7/8
ER
4 3/4
5 7/8
6 1/4
7 5/8
max
B
4 7/8
4 3/8
6 1/8
L
min. max.
23 1/2
55
23 1/2
55
23 1/2
55
23 1/2
55
max
ISO
11
11
11
lbs
53
88
140
lbs
min.
53
71
95
130
load
group
C-4
4-6
5-8
max.
141
185
231
322
load
group
3-5
3-5
4-7
5-8
lbs
54
88
141
load
group
C-4
4-6
5-8
max.
141
185
231
324
load
group
3-5
3-5
4-7
5-8
lbs
86
139
191
load
group
3-5
4-6
5-8
max.
185
254
306
355
440
load
group
3-5
4-7
5-8
5-8
6-9
Type 44
Type
Type 48
48 27 51
48 27 52
48 27 53
48 27 54
1130
1.8
4.2
6.9
d3
0.81
1.34
1.80
E
17 7/8
19 1/8
19 7/8
max
B
4 7/8
4 3/8
7 1/8
max
ISO
11
11
11
L
dN
3 5/8
3 5/8
3 5/8
3 5/8
ER
4 3/4
5 7/8
6 1/4
7 5/8
min.
23 1/2
23 1/2
23 1/2
23 1/2
lbs
max.
55
55
55
55
min.
53
73
95
132
Type
48 32 51
48 32 52
48 32 53
48 32 54
48 32 55
4.49
1130
3.8
6.7
11.4
1130
4.7
8.7
11.9
15.2
20.2
d3
1.00
1.34
1.80
E
19 5/8
20 1/8
20 7/8
max
B
3 7/8
6 7/8
5 3/4
max
ISO
11 3/8
11 3/8
11 3/8
L
dN
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
ER
5 7/8
7 1/8
7 1/8
8 1/4
9 7/8
min.
27 1/2
27 1/2
27 1/2
27 1/2
31 1/2
lbs
max.
55
55
55
55
55
min.
82
121
143
163
218
SELECTION TABLE
OD 14 - 16, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 14 ND 350/14), types 44, 48
Type
44 36 51
44 36 52
44 36 53
Type
48 36 51
48 36 52
48 36 53
48 36 54
48 36 55
1130
3.8
6.7
11.4
d3
1.00
1.34
1.80
max
B
4 1/8
7 1/8
5 3/4
E
20 1/2
20 5/8
21 1/2
max
ISO
11 3/8
11 3/8
11 3/8
L
d3
1.00
1.34
1.60
1.80
2.00
dN
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
min.
27 1/2
27 1/2
31 1/2
31 1/2
31 1/2
ER
5 1/2
6 1/4
7 1/8
8 5/8
9 1/2
lbs
94
148
200
lbs
max.
59
59
59
59
59
max.
192
225
293
403
518
min.
79
108
146
196
259
load
group
3-5
4-6
5-8
load
group
3-5
4-6
4-7
5-8
6-9
Type 44
Type
48 37 51
48 37 52
48 37 53
48 37 54
48 37 55
1130
3.8
6.9
11.4
d3
1.00
1.34
1.80
E
20 7/8
21 1/8
21 5/8
max
B
4 3/8
7 1/2
5 7/8
max
ISO
11 3/8
11 3/8
11 3/8
L
d3
1.00
1.34
1.60
1.80
2.00
dN
4 5/8
4 5/8
4 5/8
4 5/8
4 5/8
ER
5 1/2
6 1/4
7 1/8
8 5/8
9 1/2
min.
29 1/2
29 1/2
29 1/2
29 1/2
33 1/2
lbs
99
159
207
lbs
max.
59
59
59
59
59
min.
84
115
139
190
265
load
group
3-5
4-6
5-8
max.
194
227
293
405
520
load
group
3-5
4-6
4-7
5-8
6-9
lbs
106
194
295
load
group
3-5
5-8
6-9
max.
240
311
379
472
668
load
group
3-5
4-7
5-8
5-8
6-9
Type 48
Type
48 41 51
48 41 52
48 41 53
48 41 54
48 41 55
1130
3.8
9.0
15.0
d3
1.00
1.60
1.80
1.80
2.00
d3
1.00
1.80
2.00
dN
5 5/8
5 5/8
5 5/8
5 5/8
5 5/8
E
22
22 7/8
22 7/8
ER
6 1/4
7 1/8
7 7/8
9 1/2
9
max
B
4 3/8
5 3/8
7 7/8
L
min.
31 1/2
31 1/2
31 1/2
31 1/2
35 3/8
max
ISO
11 3/4
11 3/4
11 3/4
lbs
max.
63
63
63
63
63
min.
124
154
187
225
348
4.50
SELECTION TABLE
OD 16.50 - 20, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 16.50 (ND 400/16), types 44, 48
Type
44 42 51
44 42 52
44 42 53
Type
48 42 51
48 42 52
48 42 53
48 42 54
48 42 55
1130
3.8
9.4
15.5
d3
1.00
1.80
2.00
E
22 1/4
22 3/4
22 3/4
max
B
4 1/2
5 3/8
8 1/4
L
dN
5 5/8
5 5/8
5 5/8
5 5/8
5 5/8
ER
6 1/4
7 1/8
7 7/8
9 1/2
9
min.
31 1/2
31 1/2
31 1/2
35 1/2
35 1/2
max.
63
63
63
63
63
max
ISO
11 3/4
11 3/4
11 3/4
lbs
111
203
309
load
group
3-5
5-8
6-9
max.
240
313
381
472
672
load
group
3-5
4-7
5-8
5-8
6-9
lbs
121
179
308
448
load
group
3-5
5-8
6-9
6-9
max.
344
384
523
805
866
load
group
4-7
5-8
5-8
6-9
7-10
lbs
130
209
370
498
load
group
3-5
5-8
6-9
7-10
max.
392
434
600
908
1034
load
group
4-7
5-8
5-8
6-9
7-10
lbs
min.
125
154
190
245
353
Type 44
Type
Type 48
48 46 51
48 46 52
48 46 53
48 46 54
48 46 55
1130
3.8
6.9
13.9
22.4
permissible load
1130 1148 1166 1184
5.1
6.0
6.9
8.1
5.8
6.9
7.8
9.2
15.7 13.7 11.9 10.3
32.1 28.3 24.5 21.3
35.9 31.4 27.6 23.8
(lbs x 1000)
1200F d3
4.5
1.60
5.1
1.80
9.0
1.80
17.9
2.00
20.2
2.40
d3
1.00
1.80
2.00
2.00
E
23 1/4
23 5/8
23 7/8
24 3/8
max
B
4 3/4
5 3/8
7 5/8
12 3/8
max
ISO
11 3/4
11 3/4
11 3/4
11 3/4
L
ER
dN
5 5/8 6 3/4
5 5/8 7 1/2
5 5/8 9
5 5/8 10
5 5/8 10 7/8
min.
35 1/2
35 1/2
35 1/2
39 1/2
39 1/2
lbs
max.
67
67
67
67
67
min.
181
203
262
439
474
Type
48 51 51
48 51 52
48 51 53
48 51 54
48 51 55
4.51
1130
3.8
7.8
15.7
23.8
d3
1.00
1.80
2.00
2.40
E
24 1/4
24 3/4
25
25 5/8
max
B
4 3/4
5 3/8
9
8 1/4
max
ISO
11 3/4
11 3/4
11 3/4
11 3/4
L
ER
dN
6 3/4 7 1/4
6 3/4 7 7/8
6 3/4 9 1/4
6 3/4 10 7/8
6 3/4 12 1/4
min.
39 1/2
39 1/2
39 1/2
41 1/2
41 1/2
lbs
max.
71
71
71
71
71
min.
216
243
309
503
567
SELECTION TABLE
OD 22 - 26, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 22 (ND 550/22), types 44, 48
Type
44 56 51
44 56 52
44 56 53
44 56 54
Type
48 56 51
48 56 52
48 56 53
48 56 54
48 56 55
1130
7.8
15.7
23.8
31.7
x 1000)
1200F
4.9
6.7
9.0
17.9
26.9
d3
1.80
2.00
2.40
2.40
E
25
26
26
27
3/
4
1/
8
5/
8
1/
8
max
B
5 3/8
9 1/2
8 1/2
11 3/8
L
d3
1.60
1.80
1.80
2.00
2.40
ER
dN
6 3/4 7 7/8
6 3/4 9 1/4
6 3/4 9 1/2
6 3/4 11
6 3/4 14
min.
43 1/2
43 1/2
43 1/2
43 1/2
47
max.
75
75
75
75
75
max
ISO
11 3/4
11 3/4
11 3/4
11 3/4
lbs
229
406
534
672
lbs
min. max.
448
254
551
311
653
350
979
542
743 1275
load
group
5-8
6-9
7-10
7-10
load
group
4-7
5-8
5-8
6-9
7-10
Type 44
Type
48 61 51
48 61 52
48 61 53
48 61 54
48 61 55
48 61 56
1130
7.8
15.7
23.8
35.7
x 1000)
1200F
4.9
9.0
11.9
17.5
26.9
33.7
d3
1.80
2.00
2.40
2.80
27
27
28
29
dN
7 7/8
7 7/8
7 7/8
7 7/8
7 7/8
7 7/8
ER
8 5/8
8 7/8
11
11 5/8
14
13 3/4
E
3/
8
3/
4
1/
8
1/
8
max
B
5 3/8
10
8 7/8
9
L
d3
1.60
1.80
1.80
2.00
2.40
2.80
max.
79
79
79
79
79
79
min.
47
47
47
51
51
51
max
ISO
12 1/4
12 1/4
12 1/4
12 1/4
lbs
259
453
586
771
lbs
min. max.
510
300
736
425
835
483
660 1082
842 1391
996 1620
load
group
5-8
6-9
7-10
8-30
load
group
4-7
5-8
5-8
6-9
7-10
8-30
Type 48
1130
7.8
15.7
23.8
35.7
x 1000)
1200F
5.6
9.0
12.3
17.9
26.9
33.7
d3
1.80
2.00
2.40
2.80
28
28
29
30
dN
8 7/8
8 7/8
8 7/8
8 7/8
8 7/8
8 7/8
ER
9
9
11
12 1/4
13
13 3/4
E
3/
8
3/
4
3/
8
3/
8
max
B
5 3/8
10 1/4
8
9 1/4
L
d3
1.60
1.80
1.80
2.00
2.40
2.80
min.
49
49
49
49
53
53
max.
81
81
81
81
81
81
max
ISO
12 1/4
12 1/4
12 1/4
12 1/4
lbs
272
485
629
825
lbs
min. max.
657
355
798
478
924
547
703 1177
925 1497
1087 1742
load
group
5-8
6-9
7-10
8-30
load
group
4-7
5-8
5-8
6-9
7-10
8-30
4.52
SELECTION TABLE
OD 28 - 32, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 28 (ND 700/28), types 44, 48
Type
44 71 51
44 71 52
44 71 53
44 71 54
44 71 55
Type
48 71 51
48 71 52
48 71 53
48 71 54
48 71 55
48 71 56
1130
9.9
15.7
23.8
31.7
41.8
d3
1.80
2.00
2.40
2.40
2.80
E
29
29
30
30
31
1/
8
7/
4
3/
8
7/
8
1/
4
max
B
6 1/2
10 5/8
9 1/2
8 1/2
11 1/4
max
ISO
12 1/4
12 1/4
12 1/4
12 1/4
12 1/4
L
dN
8 7/8
8 7/8
8 7/8
8 7/8
8 7/8
8 7/8
ER min.
9
51
9
51
11
51
12 1/4 55
13 1/4 55
14
57
max. min.
82 1/2 388
82 1/2 505
82 1/2 659
82 1/2 772
82 1/2 979
82 1/2 1200
lbs
341
525
680
760
1035
load
group
5-8
6-9
7-10
7-10
8-30
lbs
max.
701
829
1079
1221
1565
1860
load
group
4-7
5-8
6-9
6-9
7-10
8-30
lbs
374
569
724
981
1290
load
group
5-8
6-9
7-10
8-30
9-30
lbs
max.
849
970
1235
1442
1795
2355
load
group
4-7
5-8
6-9
6-9
7-10
8-30
lbs
623
797
1012
1132
1375
load
group
6-9
7-10
8-30
8-30
9-30
Type 44
Type 48
48 76 51
48 76 52
48 76 53
48 76 54
48 76 55
48 76 56
d3
1.80
2.00
2.40
2.80
2.80
30
31
31
32
32
dN
9 7/8
9 7/8
9 7/8
9 7/8
9 7/8
9 7/8
ER
10 1/4
10 1/4
12 1/4
13 3/8
13
16 1/8
1130
9.9
15.7
23.8
35.7
47.4
E
3/
8
1/
8
1/
2
1/
8
1/
4
max
B
6 7/8
11
9 5/8
9 7/8
12 1/4
max
ISO
12 1/4
12 1/4
12 1/4
12 1/4
12 1/4
L
max.
90 1/2
90 1/2
90 1/2
90 1/2
90 1/2
90 1/2
min.
59
59
59
59
59
63
min.
553
624
794
906
1120
1537
4.53
1130
15.7
23.8
33.7
39.8
47.4
d3
2.00
2.40
2.80
2.80
2.80
32
33
33
33
33
dN
9 7/8
9 7/8
9 7/8
9 7/8
9 7/8
9 7/8
ER
11
11 3/4
13
13 3/4
13 3/4
17 3/4
E
1/
1/
1/
5/
5/
max
B
11 5/8
10 1/4
9 5/8
11 1/4
13 3/8
max
ISO
12 5/8
12 5/8
12 5/8
12 5/8
12 5/8
L
min.
63
63
63
63
63
63
lbs
max. min.
94 1/2
648
94 1/2
719
94 1/2
873
94 1/2
996
94 1/2 1237
94 1/2 1726
max.
980
1107
1330
1552
1938
2715
load
group
5-8
5-8
6-9
6-9
7-10
8-30
SELECTION TABLE
OD 36, TEMPERATURE 1130 - 1200F
Pipe clamps, OD 36 (ND 900/36), types 44, 48
Type
44 91 51
44 91 52
44 91 53
44 91 54
44 91 55
Type
48 91 51
48 91 52
48 91 53
48 91 54
48 91 55
48 91 56
1130
15.7
23.8
33.7
39.8
47.4
d3
2.00
2.40
2.80
2.80
2.80
max
B
12
10 7/8
10
12 1/4
14 1/8
E
34 1/4
35 1/4
35 5/8
36
35 7/8
max
ISO
12 5/8
12 5/8
12 5/8
12 5/8
12 5/8
L
d3
1.80
1.80
2.00
2.40
2.80
2.80
ER
11 3/4
13
13 3/4
15 1/8
18 1/2
17 3/4
dN
11
11
11
11
11
11
min.
67
67
67
67
71
71
lbs
718
903
1129
1308
1556
lbs
max.
98 1/2
98 1/2
98 1/2
98 1/2
98 1/2
98 1/2
min.
774
908
1115
1495
2022
2297
max.
1153
1390
1733
2300
2970
3310
load
group
6-9
7-10
8-30
8-30
9-30
load
group
5-8
5-8
6-9
7-10
8-30
9-30
Type 44
Type 48
Type
49 00 01
49 00 01
49 00 01
49 00 01
49 00 01
49 00 02
49 00 02
49 00 02
49 00 02
49 00 02
49 00 03
49 00 04
49 17 11
49 14 12
49 11 25
49 06 35
49 11 45
49 32 13
49 32 14
49 32 25
49 32 35
49 32 45
49 51 45
49 91 45
1
1
1
1
1
2
2
2
2
2
3
4
3/
8
3/
8
3/
8
3/
8
3/
8
1/
8
1/
8
1/
8
1/
8
1/
8
1/
8
3/
8
5/
8
5/
8
5/
8
5/
8
5/
8
1/
4
1/
4
1/
4
1/
4
1/
4
3/
4
1
1
1
1
1
1
2
1
1
1
1
1
2
3
7/
8
7/
8
7/
8
7/
8
7/
8
3/
8
3/
8
3/
8
3/
8
3/
8
1/
8
1/
8
t
5/
16
5/
16
5/
16
5/
16
5/
16
1/
2
1/
2
1/
2
1/
2
1/
2
5/
8
a
weight/pair
leg length
(lbs)
3/
0.2
16
3/
0.2
16
3/
0.2
16
3/
0.2
16
3/
0.2
16
1/
0.6
4
1/
0.6
4
1/
0.6
4
1/
0.6
4
1/
0.6
4
5/
1.5
16
7/
4.0
16
Order details:
Lift-off restraint
Type 49 00 ..
4.54
CONNECTING PLATES
TYPE 77
Connecting plates for
coupling pipe clamps
Type 43
Type 77 09 39 to 77 19 39
Twice the specified load is
possible by coupling two
pipe clamps with Type 77.
Order details:
Connecting plate
Type 77 .. 39
Type
for clamps
77 09 39
77 17 39
77 19 39
43 01 19 up to 43 09 59
43 10 19 up to 43 17 59
43 19 19 up to 43 19 39, 43 19 59
load group
d3
D-5
3-6
4-7
1.00
1.34
1.80
2 1/2
2 3/4
3 1/2
3 1/2
3 1/2
3 1/2
weight
(lbs)
1.8
2.6
5.1
Type 60
Type 77 22 .. to 77 91 ..
Type designation of connecting
plates: the figures 44 of clamps to
be coupled are to be replaced by 77
e.g. connecting plate for
type 44 66 38
77 66 38.
The load group for the upper
connection (Type 60) is to be
given when ordering
Order details:
Connecting plate
Type 77 .. .., load group ...
4.55
Type
77 22 .. up to 77 27 ..
77 32 .. up to 77 37 ..
77 41 .. up to 77 46 ..
77 51 .. up to 77 56 ..
77 61 .. up to 77 91 ..
load group
5-10
5-30
6-30
7-50
7-50
d1
min max
2.37
1.30
2.76
1.30
2.76
1.58
3.55
1.78
3.55
1.78
E
5
5
5
7
7
3/
8
1/
2
1/
2
7/
8
1/
2
Bmax
7 1/8
8 7/8
10 7/8
11 7/8
12 3/4
weight
(lbs)
22-51
24-70
35-115
66-165
68-181
INSTALLATION INSTRUCTIONS
Type 46
4.56
Type 49 .. .1 and 49 .. .2
Type 49 .. .3, 4
Type 48
Type 49 .. .3, 4, 5
4.57
According to the particular field of application, different designs are used with regard
to support height, pipe diameter, support load
and operating temperature. The following
points are hereby to be observed:
Type 49 .. .1 and 49 .. .2
This clamp base consists of two halves to be
fitted to each side of the pipes. The cornered
ends form the base plate. In the lower
part, both halves are firmly connected to
each other by bolting. Through clamping
tension, the upper bolting secures the
clamp base against slipping.
Type 49 .. .3 and 49 .. .5
The foot of this clamp base forms a solid
support into which the pipe can be fitted.
The upper part, providing clamping tension,
consists of half a clamp and is to be securely
bolted.
5
PRODUCT
GROUP
PIPE BEARINGS
AND SADDLE COMPONENTS
CONTENTS
PAGE
PRODUCT
GROUP
6
7
8
9
5.0
ROLLER BEARINGS
TYPE 51 TO 53
Piping systems arranged
horizontally over long
stretches are placed on
supports. To allow normal
thermal movement, the
support points are designed
as either sliding or roller
types.
The standard roller bearing is hot-dip galvanized and provides optimum corrosion protection. Except for the movable double cylinder
roller bearing Type 53 .. 29, weldings have
been dispensed with.
The bearing axles are made from austenitic
material and have a polished surface.
The slide bearings incorporate bushings made
from a Teflon bronze sintered compound material fitted into the roller. The bearings are
maintenance free and guarantee dry running
qualities. The formed shoulder of each bushing
minimizes the stick-slip drag effect on lateral
loading. The bearing axles are permanently
fixed in the middle section of the base. Special locking on the side bracket is not required.
The rollers are made from high tensile carbon
steel. Their outer surfaces are machined.
5.1
5
The special design and quality of manufacture provide the following application
benefits:
maintenance of minimum roll
resistance (max 4%)
takeover of realistic lateral loading
for double taper and double cylinder
roller bearings (35% of the support
load)
INSTALLATION INSTRUCTIONS
Roller Bearings
The roller bearings can be fixed by simple
bolt connections or welded to the contact
surface of the pipe support. In each case the
complete width of the base plate must be
supported and secured.
Due to the slotted holes, roller bearings can
easily be adjusted even with slightly misaligned anchor bolts.
Pipe Saddles
Welded pipe saddles are supplied coated with
a weldable primer (1.18 mil [30m]) (see
Technical Specification page 0.10).
Care must be taken that the specified minimum weld size is applied.
Pipe saddles with clamps are supplied ready
to install.
Care must be taken to ensure the correct positioning and adequate presetting of the bolts.
Lift-off restraints
When installing the lift-off restraint plate, care
must be taken to ensure that the gap between plate and roller is sufficient for normal
movement along the whole travel range.
5.2
Single cylinder
roller bearing
type 51 08 19 to 51 35 19
Load FN
(lbs x 1000)
51 08 19
1.8
51 16 19
3.6
51 35 19
7.9
A1
A2
31/2
43/4
53/4
23/4
37/8
43/4
31/8
37/8
51/8
2
23/8
33/8
13/8
21/8
23/8
23/8
3
33/4
Type
Order details:
Type 51 .. 19
a
13/
16
15/
16
3/
8
1/
2
9/
16
3/
16
1/
4
3/
8
Weight
(lbs)
2.6
5.2
12.2
E = 1.064 R +x
Order details:
Type 52 .. 19
Load FN
(lbs x 1000)
52 04 19
0.9
52 08 19
1.8
52 16 19
3.6
52 35 19
7.9
Type
R
11/8
31/4
43/8
53/8
- 37/8
- 51/8
- 61/2
-9
A
41/8
53/8
61/2
9
31/2
37/8
43/4
61/4
23/4
33/8
37/8
53/8
E
min. max.
31/4 61/4
6
8
71/2 97/8
93/4 135/8
21/8
3
31/2
51/8
23/4
3
31/2
43/4
13/
16
13/
16
15/
16
3/
8
3/
8
1/
2
9/
16
3/
16
1/
4
5/
16
1/
2
21/8
21/2
27/8
4
41/8
43/4
51/2
71/8
23/4
3
31/2
43/4
13/
16
13/
16
15/
16
3/
3/
1/
9/
16
Weight
(lbs)
4.0
7.2
12.0
30.8
travel 2 inch
E = 1.064 R +x
Order details:
Type 52 .. 29
5.3
Load FN
(lbs x 1000)
11/8
0.9
52 04 29
1.8
31/4
52 08 29
3.6
43/8
52 16 29
7.9
53/8
52 35 29
Type
R
- 37/8
- 51/8
- 61/2
-9
61/8
71/4
81/2
11
31/2
37/8
43/4
61/4
23/4
33/8
37/8
53/8
E
min. max.
31/4 61/4
6
8
71/2 97/8
93/4 135/8
3/
16
1/
4
5/
16
1/
2
x
21/8
21/2
27/8
4
Weight
(lbs)
4.4
8.0
13.2
34.2
5
E
Load FN
(lbs x 1000)
1.8 11/8
53 08 19
3.6 33/8
53 16 19
7.9 67/8
53 35 19
53 60 19 13.5 97/8
53 12 19 27.0 153/4
Type
R
-
71/2
121/4
173/8
201/2
265/8
A1
A2
81/4
121/4
161/2
191/4
243/8
71/2
111/4
145/8
167/8
205/8
31/8
37/8
51/8
57/8
71/8
21/2
31/2
43/8
53/8
61/2
E
min. max.
27/8 91/2
53/8 143/4
91/2 201/2
13
241/4
191/2 31
F
51/2
9
125/8
145/8
181/8
23/8 13/16
15/
3
16
1
/
3 2 1
37/8 11/4
41/2 11/4
3/
8
1/
2
9/
16
11/
16
7/
8
3/
16
1/
4
3/
8
1/
2
11/
16
x Weight
(lbs)
15/8
5.6
13/4 12.2
21/8 30.8
21/2 50.8
23/4 105.8
E = 1.064 R+x
Order details:
Type 53 .. 19
Double cylinder roller
bearing (sideways movable)
type 53 08 29 to 53 12 29
A + travel s
Load FN
Type
(lbs x 1000)
53 08 29
1.8 11/8
53 16 29
3.6 33/8
53 35 29
7.9 67/8
53 60 29 13.5 97/8
53 12 29 27.0 153/4
R
-
71/2
121/4
173/8
201/2
265/8
A
101/4
133/4
183/4
207/8
271/2
B
81/4
113/4
161/8
181/4
25
C
2
2
23/8
23/4
31/8
d
3/
8
1/
2
9/
16
11/
16
7/
8
E
F
G
min. max.
27/8 9 1/2 53/4 6 1/2
53/8 143/4 61/4 7 1/4
91/2 201/2 81/2 9 5/8
13 241/4 97/8 113/8
191/2 31
123/8 141/8
E = 1.064 R+x
21/2
31/2
43/8
51/8
61/4
23/8
1/
4
1/
4
1/
4
3/
8
3/
8
3
37/8
43/4
53/4
Weight
x
(lbs)
15/8 13.2
13/4 22.0
21/8 50.8
21/2 77.2
23/4 154.0
Travel s = 4235/8inch
Center fixing point from
Travel s = 117/8inch
Weight at s = 4inch
Order details:
Type 53 .. 29
with s = ...inch
5.4
OD
Up to
OD 16
From
OD 20
L=12
Load at pipe
temperature 302F.
Order details:
Type 54 .. 19
R = ...inch
Type
54 06 19
54 08 19
54 09 19
54 11 19
54 14 19
54 17 19
54 19 19
54 22 19
54 27 19
54 32 19
54 36 19
54 41 19
54 51 19
54 61 19
54 71 19
54 81 19
Load FN
(lbs x 1000)
0.3
0.3
0.3
0.4
0.9
0.9
1.1
1.8
2.7
4.5
4.5
8.5
11.2
14.6
22.5
27.0
OD
2.37
3.00
3.50
4.50
5.50
6.63
7.63
8.63
10.75
12.75
14.00
16.00
20.00
24.00
28.00
32.00
31/8
31/2
33/4
43/8
43/4
53/8
57/8
61/4
71/2
81/2
9
10
123/4
143/4
167/8
187/8
leg length
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
1/
4
1/
4
1/
4
1/
4
5/
16
5/
16
5/
16
3/
8
3/
8
71/8
71/2
75/8
81/4
85/8
91/4
97/8
101/4
113/8
123/8
13
14
163/8
181/4
201/2
221/2
s
1/
1/
1/
1/
8
3/
16
3/
16
3/
16
1/
4
3/
8
1/
2
1/
2
9/
16
3/
8
1/
2
9/
16
13/
16
Weight
(lbs)
3.0 - 7.8
3.4 - 8.2
3.4 - 8.4
3.4 - 8.8
4.4 - 11.0
6.6 - 14.4
6.6 - 15.0
8.8 - 17.6
14.8 - 29.8
21.2 - 39.6
22.0 - 39.6
28.6 - 55.2
22.0 - 35.2
26.4 - 46.2
35.2 - 57.4
41.8 - 72.8
OD
OD
Up to
OD 16
From
OD 20
L=12
Load at pipe
temperature 302F.
Order details:
Type 54 .. 29
R = ...inch
5.5
Type
54 06 29
54 08 29
54 09 29
54 11 29
54 14 29
54 17 29
54 19 29
54 22 29
54 27 29
54 32 29
54 36 29
54 41 29
54 51 29
54 61 29
54 71 29
54 81 29
Load FN
(lbs x 1000)
0.3
0.3
0.3
0.4
0.9
0.9
1.1
1.8
2.7
4.5
4.5
8.5
11.2
14.6
22.5
27.0
OD
2.37
3.00
3.50
4.50
5.50
6.63
7.63
8.63
10.75
12.75
14.00
16.00
20.00
24.00
28.00
32.00
R
31/8
31/2
33/4
43/8
43/4
53/8
57/8
61/4
71/2
81/2
9
10
123/4
143/4
167/8
187/8
71/8
71/2
75/8
81/4
85/8
91/4
97/8
101/4
113/8
123/8
13
14
163/8
181/4
201/2
221/2
15/8
15/8
15/8
2
2
2
2
2
23/8
23/8
23/8
23/4
23/4
31/2
31/2
31/2
1/
8
1/
8
1/
8
1/
8
3/
16
3/
16
3/
16
1/
4
3/
8
1/
2
1/
2
9/
16
3/
8
1/
2
9/
16
13/
16
Weight
(lbs)
5.6 - 10.6
6.2 - 12.8
6.8 - 13.2
11.0 - 15.4
13.2 - 19.8
15.4 - 26.4
17.6 - 28.6
19.8 - 33.0
33.0 - 44.0
41.8 - 57.4
46.2 - 66.2
66.2 - 88.2
70.6 - 83.8
139.0 - 159.0
165.0 - 190.0
185.0 - 216.0
90
Type
54 06 39
54 08 39
54 09 39
54 11 39
54 14 39
54 17 39
54 19 39
54 22 39
54 27 39
54 32 39
54 36 39
54 41 39
54 51 39
54 61 39
54 71 39
54 81 39
Load FN
(lbs x 1000)
0.2
0.2
0.3
0.4
0.9
0.9
1.2
1.8
2.3
3.4
4.5
7.9
9.0
13.5
18.0
22.5
L=12
OD
2.37
3.00
3.50
4.50
5.50
6.63
7.63
8.63
10.75
12.75
14.00
16.00
20.00
24.00
28.00
32.00
1 3/8
1 5/8
1 7/8
2 1/2
3
3 1/2
4
4 5/8
5 5/8
6 3/4
7 3/8
8 3/8
10 3/8
12 1/2
14 5/8
16 5/8
Weight
(lbs)
3.5
4.5
5.5
10.5
12.0
13.0
14.5
16.5
24.5
31.0
35.5
53.0
61.5
123.0
150.0
165.0
s
1/
1/
3/
16
3/
16
3/
16
3/
16
3/
16
1/
1/
5/
16
3/
3/
3/
1/
9/
16
9/
16
Order details:
Type 54 .. 39
Lift-off restraint
type 55 08 19 to 55 12 19
OD
L=12
Type
55 08 19
55 16 19
55 35 19
55 60 19
55 12 19
compatible with
roller bearing, type
53 08 19
53 16 19
53 35 19
53 60 19
53 12 19
8 7/8
13 1/4
17 7/8
22
27 1/2
31/8
37/8
51/8
57/8
71/8
R
11/8
33/8
67/8
97/8
153/4
71/2
121/4
173/8
201/2
265/8
Order details:
Type 55 .. 19
for type 54 .. .9
R = ...inch
5.6
Insulation Material
The insulation material that forms an integral
part of the insulated pipe support assembly
is manufactured using fire-retarding highdensity polyurethane (PUF) foam. For the
supply of the PUF components and consumables, LISEGA have
formed an alliance with Bains Harding
Industries Pty. Ltd., Australia. With more than
twenty five years experience in industrial
insulation, the company has extensive
experience in the manufacture of rigid
polyurethane insulation materials including
highdensity moulded products and provide
construction and maintenance services to
the liquefied natural gas industry (LNG) in
Australia and South East Asia.
PUF Manufacture
The PUF is monolithically molded in heavy
duty steel molds under carefully controlled
temperature and humidity conditions. This
ensures compliance with dimensional specifications and provides clean, sharp edges
that fit neatly with the adjacent line insulation material on site. Careful attention is
given to the curing of the PUF after molding
to ensure dimensional stability.
5.7
5
Material properties of insulation
Unit
Density
Compressive strength
Linear coefficient of
expansion
Closed cell content
Thermal conductivity
Nominal thickness
Type
of insulation (inch)
88 06 3. 3
88 07 3. 4
88 09 3. 5
88 11 3. 6
7
8
10
lbs/ft3
68F lbs/inch2
-265F
1/F
%
68F Btu inch/
-265F (HR ft2 F)
Test
standard
ASTM
D1622
ASTM
D1621
BS 4370
ASTM
D2856
ASTM
C177
14
10
20
580 1015
290
834 1777
533
-6
-6
38.9x10-6 38.9x10 38.9x10
90
0.222
0.146
90
90
0.243 0.284
0.187 0.236
Thickness
of layering (inch)
1.5 / 1.5
2/2
1/2/2
2/2/2
2/3/2
2/4/2
2/2/4/2
5.8
9
12
171/2
231/2
311/2
Width of the
clamp base B
4
6
8
12
16
20
2 3/4
>9
>12
>17 1/2
>23 1/2
>31 1/2
OD
C minus 3/4
61/4
Type
56 01 ..
56 02 ..
56 03 ..
56 06 ..
56 09 ..
56 11 ..
56 17 ..
56 22 ..
56 27 ..
56 32 ..
56 36 ..
56 41 ..
56 46 ..
56 51 ..
56 56 ..
56 61 ..
56 66 ..
56 71 ..
56 76 ..
56 81 ..
56 91 ..
Permissible load
(lbs x 1000) at 275F [-170C]
1
2 3/4
3
3 1/4
4 3/8
5 1/2
6 1/2
8 5/8
10 5/8
12 3/4
11/2
4
4 1/4
4 1/2
5 1/2
6 5/8
7 5/8
9 3/4
11 3/4
13 7/8
15 7/8
2
4 3/4
5
5 1/4
6 1/4
7 1/2
8 3/8
10 1/2
12 1/2
14 5/8
16 3/4
18
3
7 1/8
7 3/8
7 5/8
8 5/8
9 3/4
10 3/4
12 7/8
14 7/8
17
19
20 3/8
22 1/4
4
8 3/4
8 7/8
9 1/4
10 1/4
11 3/8
12 3/8
14 1/2
16 1/2
18 5/8
20 5/8
21 7/8
23 7/8
25 7/8
27 7/8
29 7/8
31 7/8
33 7/8
35 7/8
37 7/8
39 7/8
43 7/8
11 1/4
11 5/8
12 5/8
13 3/4
14 3/4
16 7/8
18 7/8
21
23
24 1/4
26 1/4
28 1/4
30 1/4
32 1/4
34 1/4
36 1/4
38 1/4
40 1/4
42 1/4
46 1/4
14 1/8
15 3/8
16 1/4
18 3/8
20 3/8
22 1/2
24 5/8
25 7/8
27 3/4
29 3/4
31 3/4
33 7/8
35 7/8
37 3/4
39 3/4
41 3/4
43 7/8
47 3/4
17 5/8
18 5/8
20 3/4
22 3/4
24 7/8
26 7/8
28 1/4
30 1/8
32 1/8
34 1/8
36 1/8
38 1/4
40 1/8
42 1/8
44 1/8
46 1/8
50 1/8
20 1/4
22 3/8
24 3/8
26 1/2
28 1/2
29 3/4
31 3/4
33 3/4
35 3/4
37 3/4
39 3/4
41 3/4
43 3/4
45 3/4
47 3/4
51 3/4
10
24 1/8
26 1/4
28 1/4
30 3/8
32 1/2
33 3/4
35 5/8
37 5/8
39 5/8
41 3/4
43 3/4
45 5/8
47 5/8
49 5/8
51 3/4
55 5/8
0.52
0.65
0.83
1.51
2.20
2.70
4.05
5.40
6.74
8.09
8.77
10.10
11.20
12.50
13.90
15.00
16.40
17.70
18.80
20.20
22.40
..
..
..
..
5.9
1.
2.
4.
6.
Length
Length
Length
Length
C:
C:
C:
C:
12;
20;
20;
20;
density
density
density
density
23.60
26.90
30.30
33.70 59.50
37.00 65.10
40.40 71.90
43.80 77.50
47.20 83.10
50.50 89.90
53.90 95.50
61.80 107.90
56 .. .0 56 .. .1 56 .. .2 56 .. .3 56 .. .4 56 .. .5 56 .. .6 56 .. .7 56 .. .8 56 .. .9 56 .. 1.
..
..
..
..
0.52
0.65
0.83
1.51
2.20
4.72
6.97
8.99
11.20
13.40
14.60
16.80
18.80
21.10
22.40
24.70
26.90
29.20
31.40
33.70
37.00
of
of
of
of
insulation
insulation
insulation
insulation
10
10
14
20
lb/ft3
lb/ft3
lb/ft3
lb/ft3
56 .. 2.
56 .. 4. 56 .. 6.
Other pipe support configurations can be supplied (pipe support stanchions, cradles, anchors)
on request.
LISEGA standard cold block supports incorporate Lignostone densified wood blocks
that are manufactured from selected beech
veneers, impregnated under vacuum with
thermosetting synthetic resin and densified
under heat and pressure. The Lignostone
blocks combine high strength with low thermal conductivity, have proven cryogenic
capability and are used exclusively for cold
pipe applications throughout the world.
Temperature
F
Thermal
Btu inch /
conductivity (HR ft2 F)
Type
56 01 91
56 02 91
56 03 91
56 06 91
56 09 91
56 11 91
56 17 91
56 22 91
56 27 91
56 32 91
56 36 91
56 41 91
56 46 91
56 51 91
56 56 91
56 61 91
56 66 91
56 71 91
56 76 91
56 81 91
56 91 91
OD
0.84
1.06
1.33
2.37
3.50
4.50
6.63
8.63
10.75
12.75
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
30.00
32.00
36.00
permissible load
(lbs x 1000)
0.29
0.36
0.47
0.83
1.24
1.60
2.25
2.92
3.82
4.50
4.95
5.62
6.29
6.97
7.64
8.54
9.22
9.89
10.57
11.24
12.81
+68
-148
-292
OD
-321
67/8
67/8
67/8
67/8
67/8
67/8
67/8
91/2
91/2
141/8
141/8
141/8
161/8
173/8
191/4
191/4
231/4
231/4
231/4
231/4
271/8
77/8
77/8
77/8
77/8
77/8
77/8
77/8
77/8
77/8
153/4
153/4
153/4
153/4
153/4
153/4
153/4
153/4
153/4
153/4
153/4
153/4
37/8
37/8
37/8
37/8
37/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
57/8
43/8
41/2
45/8
51/8
55/8
81/8
91/4
101/4
111/4
121/4
127/8
137/8
147/8
157/8
167/8
177/8
187/8
197/8
207/8
217/8
237/8
27/8
31/8
31/4
45/8
51/2
71/4
83/4
101/8
123/8
137/8
143/4
171/4
183/4
203/4
231/2
251/4
271/8
291/8
311/8
331/4
371/8
1 3/8
1 5/8
1 5/8
2 1/4
2 3/4
3 5/8
4 3/8
5 1/8
6 1/4
7
7 3/8
8 5/8
9 3/8
10 3/8
11 3/4
12 5/8
13 5/8
14 5/8
15 5/8
16 5/8
18 5/8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
5/
8
5/
8
5/
8
5/
8
5/
8
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
3/
4
J
53/8
53/8
53/8
53/8
53/8
53/8
53/8
77/8
77/8
125/8
125/8
125/8
145/8
153/4
173/4
173/4
215/8
215/8
215/8
215/8
255/8
Length=B
permissible loads at
cryogenic temperature
5.10
2
Order details:
Weld-on pipe shoe
type 57 .. 1.
5.11
Type
57 03 11
57 03 11
57 03 11
57 03 11
57 03 11
57 07 11
57 07 11
57 07 11
57 07 11
57 13 11
57 13 11
57 13 11
57 13 11
57 13 11
57 13 11
57 24 12
57 24 12
57 24 12
57 24 12
57 24 12
57 36 12
57 36 12
57 36 12
57 42 12
57 42 12
57 42 12
57 51 12
57 51 12
57 61 12
57 61 12
Load F [lbsx1000]
at 175F
0.22
0.22
0.22
0.22
0.22
0.34
0.34
0.34
0.34
0.45
0.45
0.45
0.45
0.45
0.45
1.35
1.35
1.35
1.35
1.35
1.80
2.25
2.25
2.25
2.25
2.70
3.37
3.37
4.50
4.50
OD
a
leg length
0.84
1.06
1.33
1.67
1.90
2.37
2.87
3.00
3.50
4.25
4.50
5.25
5.50
6.25
6.63
7.63
8.63
9.63
10.50
10.75
12.75
14.00
14.50
16.00
16.50
18.00
20.00
22.00
24.00
26.00
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
8
8
8
10
10
12
12
31/4
33/8
31/2
35/8
33/4
4
41/4
43/8
45/8
61/8
61/4
65/8
63/4
71/8
71/4
51/8
53/4
61/4
63/4
67/8
81/4
87/8
91/4
101/8
103/8
103/4
121/4
133/8
143/8
151/2
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
1/
4
Weight
(lbs)
1.5
1.5
1.5
1.5
1.5
2.3
2.3
2.3
2.3
7.5
7.5
7.5
7.5
7.5
7.5
6.0
6.0
6.0
6.0
6.0
10.0
10.0
10.0
15.6
15.6
15.6
18.3
18.3
25.8
25.8
58 05 .1
58 06 .1
58 06 .2
58 07 .1
58 07 .2
58 08 .1
58 08 .2
58 09 .1
58 09 .2
58 10 .1
58 10 .2
58 11 .1
58 11 .2
58 13 .1
58 13 .2
58 14 .1
58 14 .2
58 16 .1
58 16 .2
58 17 .1
58 17 .2
58 19 .1
58 19 .2
58 22 .1
58 22 .2
58 24 .1
58 24 .2
58 26 .1
58 26 .2
58 27 .1
58 27 .2
58 32 .1
58 32 .2
58 36 .1
58 36 .2
58 37 .1
58 37 .2
58 41 .1
58 41 .2
58 42 .1
58 42 .2
58 46 .1
58 46 .2
58 51 .1
58 51 .2
58 56 .1
58 56 .2
58 61 .1
58 66 .1
58 71 .1
58 76 .1
58 81 .1
58 91 .1
OD
1.90
2.37
2.37
2.87
2.87
3.00
3.00
3.50
3.50
4.25
4.25
4.50
4.50
5.25
5.25
5.50
5.50
6.25
6.25
6.63
6.63
7.63
7.63
8.63
8.63
9.63
9.63
10.50
10.50
10.75
10.75
12.75
12.75
14.00
14.00
14.50
14.50
16.00
16.00
16.50
16.50
18.00
18.00
20.00
20.00
22.00
22.00
24.00
26.00
28.00
30.00
32.00
36.00
Dxs
1
1
1.5
1
1.5
1
1.5
1
1.5
1.5
2.5
1.5
2.5
1.5
2.5
2.5
3
2.5
3
2.5
3
3
4
3
4
3
4
4
5
4
5
5
8
5
8
5
8
5
8
5
8
8
12
8
12
8
12
12
12
12
12
12
12
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
80
80
80
80
80
80
80
80
80
80
40
80
40
80
40
40
40
40
40
40
40
40
80
40
80
40
80
80
80
80
80
80
40
80
40
80
40
80
40
80
40
40
40
40
40
40
40
40
40
40
40
40
40
Stanchion
type
a
a
b
a
b
a
b
a
b
b
c
b
c
b
c
c
d
c
d
c
d
d
e
d
e
d
e
e
f
e
f
f
g
f
g
f
g
f
g
f
g
g
h
g
h
g
h
h
h
h
h
h
h
a leg
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
1/
4
3/
16
1/
4
3/
16
1/
4
1/
4
3/
8
1/
4
3/
8
3/
8
1/
4
3/
8
1/
4
3/
8
1/
4
3/
8
1/
4
3/
8
1/
4
1/
4
3/
8
1/
4
3/
8
1/
4
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
N
15/
16
1 3/16
1 3/16
1 7/16
1 7/16
1 1/2
1 1/2
1 3/4
1 3/4
2 1/8
2 1/8
2 1/4
2 1/4
2 5/8
2 5/8
2 3/4
2 3/4
3 1/8
3 1/8
3 5/16
3 5/16
313/16
313/16
4 5/16
4 5/16
413/16
413/16
5 1/4
5 1/4
5 3/8
5 3/8
6 3/8
6 3/8
7
7
7 1/4
7 1/4
8
8
8 1/4
8 1/4
9
9
10
10
11
11
12
13
14
15
16
18
E min
E max
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
14
14
14
14
14
14
14
14
16
16
16
16
16
16
18
18
18
18
18
18
20
20
20
20
22
22
24
24
26
28
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
46
46
46
46
46
46
46
46
46
46
48
48
48
48
48
48
48
48
50
50
50
50
50
50
50
50
52
52
52
52
54
54
54
56
56
58
58
60
Type 58 .. 11
2
OD
Type
OD
Type 58 .. 21
2
... see page 5.15
Order details:
Type 58 24 21, E = 311/2inch
5.12
Type
Type 58 .. 13
4
OD
Type 58 .. 23
4
... see page 5.15
Order details:
Stanchions for short radius elbows
R OD type 58 42 23, E = 291/2inch
5.13
58 05 .3
58 06 .3
58 06 .4
58 07 .3
58 07 .4
58 08 .3
58 08 .4
58 09 .3
58 09 .4
58 10 .3
58 10 .4
58 11 .3
58 11 .4
58 13 .3
58 13 .4
58 14 .3
58 14 .4
58 16 .3
58 16 .4
58 17 .3
58 17 .4
58 19 .3
58 19 .4
58 22 .3
58 22 .4
58 24 .3
58 24 .4
58 26 .3
58 26 .4
58 27 .3
58 27 .4
58 32 .3
58 32 .4
58 36 .3
58 36 .4
58 37 .3
58 37 .4
58 41 .3
58 41 .4
58 42 .3
58 42 .4
58 46 .3
58 46 .4
58 51 .3
58 51 .4
58 56 .3
58 56 .4
58 61 .3
58 66 .3
58 71 .3
58 76 .3
58 81 .3
58 91 .3
OD
1.90
2.37
2.37
2.87
2.87
3.00
3.00
3.50
3.50
4.25
4.25
4.50
4.50
5.25
5.25
5.50
5.50
6.25
6.25
6.63
6.63
7.63
7.63
8.63
8.63
9.63
9.63
10.50
10.50
10.75
10.75
12.75
12.75
14.00
14.00
14.50
14.50
16.00
16.00
16.50
16.50
18.00
18.00
20.00
20.00
22.00
22.00
24.00
26.00
28.00
30.00
32.00
36.00
Dxs
1 sch 80
1 sch 80
1.5 sch 80
1 sch 80
1.5 sch 80
1 sch 80
1.5 sch 80
1 sch 80
1.5 sch 80
1.5 sch 80
2.5 sch 40
1.5 sch 80
2.5 sch 40
1.5 sch 80
2.5 sch 40
2.5 sch 40
3 sch 40
2.5 sch 40
3 sch 40
2.5 sch 40
3 sch 40
3 sch 40
4 sch 80
3 sch 40
4 sch 80
3 sch 40
4 sch 80
4 sch 80
5 sch 80
4 sch 80
5 sch 80
5 sch 80
8 sch 40
5 sch 80
8 sch 40
5 sch 80
8 sch 40
5 sch 80
8 sch 40
5 sch 80
8 sch 40
8 sch 40
12 sch 40
8 sch 40
12 sch 40
8 sch 40
12 sch 40
12 sch 40
12 sch 40
12 sch 40
12 sch 40
12 sch 40
12 sch 40
Stanchion
type
a
a
b
a
b
a
b
a
b
b
c
b
c
b
c
c
d
c
d
c
d
d
e
d
e
d
e
e
f
e
f
f
g
f
g
f
g
f
g
f
g
g
h
g
h
g
h
h
h
h
h
h
h
a leg
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
3/
16
1/
4
3/
16
1/
4
3/
16
1/
4
1/
4
3/
8
1/
4
3/
8
3/
8
1/
4
3/
8
1/
4
3/
8
1/
4
3/
8
1/
4
3/
8
1/
4
1/
4
3/
8
1/
4
3/
8
1/
4
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
3/
8
E min
E max
1/
2
1/
2
1/
2
1/
2
1/
2
5/
8
5/
8
5/
8
5/
8
5/
8
5/
8
3/
4
3/
4
3/
4
3/
4
7/
8
7/
8
7/
8
7/
8
11/8
11/8
11/4
11/4
13/8
13/8
13/8
13/8
15/8
15/8
15/8
15/8
17/8
17/8
15/8
15/8
13/4
13/4
17/8
17/8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
18
18
18
18
18
20
42
42
42
42
42
42
42
42
42
42
42
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
46
46
46
46
46
46
2
2
21/8
21/8
23/8
23/8
25/8
25/8
27/8
31/8
31/4
31/2
33/4
41/4
58 05 .5
58 06 .5
58 06 .6
58 07 .5
58 07 .6
58 08 .5
58 08 .6
58 09 .5
58 09 .6
58 10 .5
58 10 .6
58 11 .5
58 11 .6
58 13 .5
58 13 .6
58 14 .5
58 14 .6
58 16 .5
58 16 .6
58 17 .5
58 17 .6
58 19 .5
58 19 .6
58 22 .5
58 22 .6
58 24 .5
58 24 .6
58 26 .5
58 26 .6
58 27 .5
58 27 .6
58 32 .5
58 32 .6
58 36 .5
58 36 .6
58 37 .5
58 37 .6
58 41 .5
58 41 .6
58 42 .5
58 42 .6
58 46 .5
58 46 .6
58 51 .5
58 51 .6
58 56 .5
58 56 .6
58 61 .5
58 66 .5
58 71 .5
58 76 .5
58 81 .5
58 91 .5
OD
1.90
2.37
2.37
2.87
2.87
3.00
3.00
3.50
3.50
4.25
4.25
4.50
4.50
5.25
5.25
5.50
5.50
6.25
6.25
6.63
6.63
7.63
7.63
8.63
8.63
9.63
9.63
10.50
10.50
10.75
10.75
12.75
12.75
14.00
14.00
14.50
14.50
16.00
16.00
16.50
16.50
18.00
18.00
20.00
20.00
22.00
22.00
24.00
26.00
28.00
30.00
32.00
36.00
Dxs
1
1
1.5
1
1.5
1
1.5
1
1.5
1.5
2.5
1.5
2.5
1.5
2.5
2.5
3
2.5
3
2.5
3
3
4
3
4
3
4
4
5
4
5
5
8
5
8
5
8
5
8
5
8
8
12
8
12
8
12
12
12
12
12
12
12
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
sch
80
80
80
80
80
80
80
80
80
80
40
80
40
80
40
40
40
40
40
40
40
40
80
40
80
40
80
80
80
80
80
80
40
80
40
80
40
80
40
80
40
40
40
40
40
40
40
40
40
40
40
40
40
Stanchion
a leg
type
3/
a
16
3/
a
16
3/
b
16
3/
a
16
3/
b
16
3/
a
16
3/
b
16
3/
a
16
3/
b
16
3/
b
16
3/
c
16
3/
b
16
3/
c
16
3/
b
16
3/
c
16
3/
c
16
3/
d
16
3/
c
16
3/
d
16
3/
c
16
3/
d
16
3/
d
16
1/
e
4
3/
d
16
1/
e
4
3/
d
16
1/
e
4
1/
e
4
3/
f
8
1/
e
4
3/
f
8
3/
f
8
1/
g
4
3/
f
8
1/
g
4
3/
f
8
1/
g
4
3/
f
8
1/
g
4
3/
f
8
1/
g
4
1/
g
4
3/
h
8
1/
g
4
3/
h
8
1/
g
4
3/
h
8
3/
h
8
3/
h
8
3/
h
8
3/
h
8
3/
h
8
3/
h
8
Emin
Emax
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
10
10
10
10
10
10
12
12
12
12
12
12
14
14
14
16
16
18
18
20
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
40
40
40
40
40
40
40
40
40
40
40
40
38
38
38
38
38
38
36
36
36
36
1/
8
1/
8
1/
8
1/
8
1/
8
1/
8
1/
8
1/
8
1/
4
1/
4
3/
8
3/
8
1/
2
1/
2
1/
2
1/
2
5/
8
5/
8
5/
8
5/
8
7/
8
7/
8
1
1
1
1
11/8
11/8
11/4
11/4
11/2
11/2
21/2
21/2
25/8
25/8
27/8
27/8
27/8
27/8
31/4
31/4
31/2
31/2
37/8
37/8
41/4
45/8
5
53/8
55/8
63/8
Type 58 .. 15
6
OD
Type 58 .. 25
6
... see page 5.15
Order details:
Stanchions for long radius elbows
R 1.5OD
type 58 42 25, E = 291/2inch
5.14
STANCHIONS
TYPE 58
Field
weld
Type designation:
58 .. 1. Stanchion
58 .. 2. Telescopic
stanchion
Type
a
b
c
d
e
f
g
h
1
1.5
2.5
3
4
5
8
12
Dxs
Axt
sch
sch
sch
sch
sch
sch
sch
sch
31/2 x 3/8
41/2 x 3/8
5 x 3/8
6 x 3/8
1
7 /2 x 1/2
81/2 x 5/8
12 x 3/4
80
80
40
40
80
80
40
40
16 x 1
L (inch)
.5OD
R1
Type 58 06 3. to 58 11 3.
Field weld
6th digit of type
designation:
OD
Type
2 = Material: 1.4301
(stainless steel)
OD
58 06 3.
58 07 3.
58 09 3.
58 11 3.
2.37
2.87
3.50
4.50
31/8
23/4
23/4
43/4
37/8
37/8
31/2
61/4
3/
16
3/
16
3/
16
1/
4
Order details:
Type 58 .. 3.
5.15
Weight
(lbs)
0.56
0.60
0.54
2.00
PRODUCT
GROUP
CONTENTS
PAGE
______________________________________________6.3
5
PRODUCT
GROUP
7
8
9
6.0
The components are drop forged, and designed (apart from turnbuckles type 62) to
allow slight length adjustments, despite
their limited installation height.
The permissible loads correspond with the
load table for statically determined pipe
supports on page 0.5 of the Technical
Specifications.
Eye nut Type 60 is used to join the rod to a
pin connection, the clevis Type 61 to join it
to a lug connection.
Turnbuckle, type 62
6.1
Eye nut
type 60 D9 29 to 60 50 22
Material: carbon steel
drop forged
from load group 40:
Welded design
Material: Carbon steel
Type
60 D9 29
60 29 22
60 39 22
60 49 22
60 59 22
60 69 22
60 79 22
60 89 22
60 99 22
60 10 22
60 20 22
60 30 22
60 40 22
60 50 22
1
1 1/4
1 3/4
2 3/8
2 7/8
3 1/2
3 7/8
4 3/8
4 3/4
5 3/8
5 7/8
6 1/4
8 5/8
9 7/8
1 5/8
2 3/8
3
3 1/2
4 3/8
5
5 1/2
6 1/8
7 1/8
7 7/8
9
9
9 7/8
11
d2
d3
UNC
UNC
5/ UNC
8
3/ UNC
4
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
0.51
0.66
0.98
1.14
1.37
1.65
1.85
2.04
2.44
2.44
2.83
2.83
3.22
3.62
1
1 5/8
1 3/4
2 1/8
2 1/2
3
3
3 3/8
3 3/8
4 1/8
5 1/8
5 1/8
3 7/8
4 3/4
3/
8
5/
8
3/
4
1
1 1/8
1 1/2
1 3/4
2
2 3/8
2 1/2
2 3/4
2 3/4
4 3/4
5 1/2
5/
8
1
1 1/8
1 3/8
1 3/4
2
2 3/8
2 3/4
3 1/8
3 3/4
4 1/8
4 3/8
4 7/8
5 1/2
3/
1/
3/
16
1/
4
7/
16
7/
16
5/
8
11/
16
13/
16
5/
8
3/
4
1
1 3/8
1 3/4
2 1/8
2 1/2
2 7/8
3 1/8
3 1/8
3 3/8
3 1/2
4 3/8
4 7/8
1
13/16
15/8
15/8
15/8
2
23/8
Weight
(lbs)
0.1
0.2
0.4
0.9
1.8
2.6
4.4
6.4
10.4
17.0
19.4
20.5
60.0
99.0
x
5/
8
3/
4
1 1/8
1 3/8
1 3/4
2
2 1/2
2 7/8
3 3/4
3 3/4
3 7/8
3 7/8
5 7/8
6 1/4
Order details:
Eye nut type 60 .. 2.
Clevis with pin
type 61 D9 29 to 61 50 22
Material: carbon steel
drop forged
from load group 40:
flame cut design
Type
61 D9 29
61 29 22
61 39 22
61 49 22
61 59 22
61 69 22
61 79 22
61 89 22
61 99 22
61 10 22
61 20 22
61 30 22
61 40 22
61 50 22
7/
8 2
1 1/4 2 3/4
1 5/8 3 1/8
2 1/8 3 1/2
2 1/2 4 3/8
2 7/8 5 1/8
3 3/8 5 7/8
3 7/8 6 3/4
4 3/4 7 1/8
5 1/8 8 1/2
6 1/8 9
6 1/8 9
5 7/8 9 1/2
6 1/2 10 1/4
C
3/
8
5/
8
3/
4
1
1 1/8
1 3/8
1 5/8
2
2 3/8
2 1/2
2 3/4
2 3/4
3 1/8
3 1/2
D
5/
8
1
1 1/4
1 5/8
1 3/4
2
2 3/8
2 7/8
3 1/4
3 1/2
4 3/8
4 3/8
d1
d2
0.40
0.48
0.63
0.79
0.95
1.30
1.58
1.78
1.97
2.37
2.76
2.76
3.15
3.55
UNC
UNC
UNC
UNC
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
3/
8
1/
2
5/
8
3/
4
1 3/8
2
2
2 1/8
2 1/2
3 1/8
3 1/2
3 7/8
3 3/4
4 3/4
5 1/8
4 7/8
5 1/8
5 1/2
3/
8
7/
16
5/
8
3/
4
13/
16
1 1/16
1 1/4
1 7/16
1 5/8
1 15/16
2 5/16
2 5/16
2 3/16
2 1/2
2
2 3/8
2 3/4
3 1/2
4 1/8
4 7/8
5 1/2
6 1/2
7 1/4
8 1/4
9 5/8
9 5/8
9
9 1/2
1
1 3/8
1 3/4
2 1/4
2 5/8
3 1/8
3 5/8
4 3/8
5 1/8
5 7/8
6 7/8
6 7/8
5 7/8
6 1/2
1
1 3/8
1 7/8
2 1/8
2 5/8
3 1/4
3 5/8
4
4 3/4
6
6
6
7 1/8
7/
8
1
1
1
1
1
3/
16
5/
16
7/
16
5/
8
3/
4
3/
4
7/
8
1/
16
5/
16
3/
16
3/
8
3/
8
x 3/8
x 1/2
x 9/16
x 13/16
x1
x 1 1/8
x 1 7/16
x 1 9/16
x 1 3/4
x 1 3/4
x 2 3/16
x 2 3/16
Weight
(lbs)
5/
0.2
8
3/
0.4
4
0.9
1 1/8
2.2
1 3/8
3.5
1 3/4
6.0
2
9.7
2 3/8
2 3/4 15.9
3 3/8 22.9
3 3/4 32.6
3 7/8 53.8
4 1/8 53.8
3 1/2 4 3/8 93.0
4 3/8 4 3/4 132.0
M
Order details:
Clevis type 61 .. 2.
6.2
TURNBUCKLE TYPE 62
ROD COUPLING TYPE 64
Turnbuckle
type 62 D9 29 to 62 50 25
Material: carbon steel
drop forged
from load group 10:
Flame cut design
Order details:
Turnbuckle type 62 .. 2.
SW
Type
62 D9 29
62 29 22
62 39 29
62 49 29
62 59 29
62 69 22
62 79 22
62 89 22
62 99 22
62 10 25
62 20 25
62 30 25
62 40 25
62 50 25
1 1/8
1 3/8
1 5/8
2
2 1/2
2 7/8
3 3/8
4 1/8
5 1/8
4 3/8
5 1/8
5 1/2
5 7/8
6 1/2
4 7/8
4 7/8
5 7/8
6 3/4
9 1/2
10
11 5/8
13
14
11 3/4
12 5/8
13
15 3/8
16 1/8
Type
64 D9 29
64 29 28
64 39 28
64 49 28
64 59 28
64 69 28
64 79 28
64 89 28
64 99 28
64 10 25
64 20 25
64 30 25
64 40 25
64 50 25
1 3/8
1 3/8
1 5/8
2
2 1/2
2 7/8
3 3/8
4 1/8
5 1/8
4 3/8
5 1/8
5 1/2
5 7/8
6 1/2
1 3/4
1 3/4
2 3/8
3
3 1/2
4 1/8
4 3/4
5 7/8
7 1/8
7 1/2
8 5/8
9 1/2
9 7/8
11
SW
d2
0.63
0.71
0.95
1.19
1.42
1.82
2.17
2.56
2.96
3.15
3.55
3.94
3.94
4.73
UNC
UNC
UNC
UNC
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
1 3/8
1 3/8
1 7/8
2 1/2
3 1/4
3 1/4
3 7/8
4
4 1/4
3
3 1/8
3 1/4
3 5/8
3 5/8
C
3/
7/
1 1/8
1 1/4
1 1/2
1 3/4
2 1/8
2 1/2
3
2 3/8
2 3/4
3
3 1/8
3 1/2
3/
8
1/
2
5/
8
3/
4
1
1
1
3
3
3
3
4
3/
8
3/
8
1/
2
5/
8
7/
8
7/
8
1/
8
1/
4
5/
8
1/
8
1/
2
7/
8
7/
8
3/
4
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
5/
16
3/
8
7/
16
9/
16
11/
16
13/
16
7/
8
1 1/16
1 3/8
7/
8
1 1/8
1 3/16
1 5/16
1 7/16
1 3/4
1 3/4
2
2 1/8
3 1/8
3 3/8
3 7/8
4 1/2
4 7/8
4 3/8
4 3/4
4 7/8
5 7/8
6 1/4
Weight
(lbs)
0.3
0.4
0.9
1.5
2.6
4.0
6.6
10.6
17.2
22.0
34.0
40.0
48.0
70.0
Rod coupling
type 64 D9 29 to 64 50 25
Material: carbon steel
drop forged
from load group 10:
Flame cut design
Order details:
Rod coupling 64 .. 2.
6.3
C
5/
8
5/
8
3/
4
1
1 1/8
1 3/8
1 5/8
2
2 3/8
2 3/8
2 3/4
3
3 1/8
3 1/2
Xd2
7/
8
7/
8
1 1/8
1 1/4
1 1/2
1 3/4
2 1/8
2 1/2
UNC
UNC
UNC
UNC
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
3
3 1/8
3 1/2
3 7/8
3 7/8
4 3/4
3/
8
1/
2
5/
8
3/
4
L
3/
8
3/
8
1/
2
5/
8
7/
8
7/
8
11/8
11/4
15/8
31/8
31/2
37/8
37/8
43/4
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/
8
3/
8
7/
16
9/
16
11/
16
13/
16
7/
8
11/16
13/8
7/
8
11/8
13/16
15/16
17/16
Weight
(lbs)
0.2
0.2
0.4
1.1
1.5
2.6
3.5
5.7
11.2
16.0
24.0
30.0
34.0
50.0
CONNECTING RODS
TYPE 63 TO 67
Piping systems are embedded in load chains
where connecting rods form an indispensable
component. When selecting them, special
attention must be paid to quality to prevent
these seemingly simple units from becoming the weakest link in the chain. Decisive
factors for their loading capacity are, beside
adequate dimensions, material quality and
design.
Applications
Threaded rods and tie rods connect support
components to each other to bridge installation heights. In conjunction with connecting components they can be used as rigid
supports, and in elastic load chains can be
used with spring and constant hangers.
Materials and loadings
For the attachment rods, only materials with
guaranteed mechanical properties, with good
homogeneity and sufficient cold ductility are
used. The permissible loads correspond to
the load sufficient table for statically defined
components (see Technical specifications
page 0.5).
Rolled threads
All threads are manufactured using a rolling
process. Thread rolling does not sever milling fibres as in thread cutting. By means of
this thread rolling process the material is
made to flow and thereby plastically formed.
In this way, additional strengthening of the
surface is achieved, free of notches and
offering high surface quality.
In this way, frictional resistance is
reduced, with a favorable effect on the
adjustment of the rods under loading.
In addition, additional reserves for the
bending and tensile strength properties
result from this by comparison with the
design calculations.
constant hanger. The longer one is the fitting length and can be cut on site according
to installation length.
Standard lengths
In general, larger tolerance ranges in the
building structure of plants frequently lead
to problems when lengths cut to measure
for the connecting rods are used; they often
prove to be too short. Offering more flexibility
in application, connecting rods in standard
lengths have come into increasing use.
Fitting can be simply carried out with hanging rods already mounted at the upper end.
Awkward measurement involving the risk of
errors is thereby avoided. Structural tolerances can be favorably compensated.
Length adjustment
Tie rods type 65 with left/right hand threads
are always used together with turnbuckle
type 62 and form standard lengths. They are
designed for length adjustment and loadactuated presetting of load chains. All other
thread connections are exclusively righthand and have to be locked using hexagon
nut type 63.
Corrosion protection
All rods are electrogalvanized as standard
(coat thickness 0.59mil [15m], chromatized
yellow for metric and white for UNC
standards).
Hot dip galvanizing is available on request.
Certification
Material certification can be supplied for all
components on request.
Special advantages:
materials with guaranteed properties
rolled threads
Types
Fully threaded rods type 67 up to 2 UNC
and tie rods type 66 (from 3/4 UNC) are available in 24 inch length increments from 24
inch up to 12 feet. Tie rods are threaded 12
inch at one end and 24 inch at the other.
The shorter thread is for adjustment and,
for example, for connection to a variable or
notch-free surfaces
electrogalvanized finish
standard lengths
in-house manufacture
6.4
Order details:
Tie rod LR type 65 .. 2.
right
left
Type
d
d2
65 D1 29
65 21 23
65 31 23
65 41 23
65 51 23
65 61 23
65 71 23
65 81 23
65 91 23
65 10 23
65 20 23
65 30 23
65 40 23
65 50 23
0.33
0.45
0.56
0.68
0.91
1.15
1.39
1.62
1.85
2.10
2.33
2.58
2.83
3.08
3/
8
1/
2
5/
8
3/
4
UNC
UNC
UNC
UNC
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
10
10
10
10
14
14
14
18
18
22
22
22
24
24
Hexagon nut
type 63 D9 19 to 63 50 18
Material: carbon steel
Hexagon nuts as counter
nuts for tie rods and threaded
rods 3/8 UNC to 31/4 UNC.
6.5
L2
left
51/8
51/8
51/8
51/8
71/2
71/2
71/2
85/8
85/8
105/8
105/8
105/8
113/4
113/4
Weight
(lbs)
0.25
0.45
0.70
1.05
2.60
4.15
6.00
10.50
13.70
21.70
26.70
32.70
42.90
50.90
Stud bolt
type 67 D1 29 to 67 91 23
Material: A36
LISEGA threaded
rods should only
be replaced in kind
Type
Order details:
Hexagon nut
type 63 .. 1.
L1
right
31/8
31/8
31/8
31/8
43/4
43/4
43/4
61/4
61/4
77/8
77/8
77/8
85/8
85/8
63 D9 19
63 29 18
63 39 18
63 49 18
63 59 18
63 69 18
63 79 18
63 89 18
63 99 18
63 10 18
63 20 18
63 30 18
63 40 18
63 50 18
Size
3/
8
1/
2
5/
8
3/
4
UNC
UNC
UNC
UNC
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
Weight
(lbs)
0.03
0.07
0.12
0.20
0.45
0.83
1.40
2.15
3.20
4.40
6.00
7.90
10.10
12.70
Type
67 D1 29
67 21 23
67 31 23
67 41 23
67 51 23
67 61 23
67 71 23
67 81 23
67 91 23
11/8
13/8
2
23/8
3
31/2
43/8
47/8
53/4
Order details:
Stud bolt type 67 .. 2.
d2
3/
8
1/
2
5/
8
3/
4
UNC
UNC
UNC
UNC
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
Weight
(lbs)
0.03
0.06
0.14
0.25
0.56
1.05
1.90
2.85
4.40
Material:
3/ UNC to 2 UNC: A36
8
21/4 UNC to 31/4 UNC: A675Gr.70
LISEGA threaded rods should
only be replaced in kind
d2
3/
1/
UNC
UNC
5/ UNC
8
3/ UNC
4
1 UNC
11/4 UNC
11/2 UNC
13/4 UNC
2 UNC
67
67
67
67
67
67
67
67
67
2
D2 29
22 23
32 23
42 23
52 23
62 23
72 23
82 23
92 23
67
67
67
67
67
67
67
67
67
4
D3 29
23 23
33 23
43 23
53 23
63 23
73 23
83 23
93 23
67
67
67
67
67
67
67
67
67
67
67
67
66
66
66
66
66
66
10
D6 29
26 23
36 23
46 23
56 23
66 23
76 23
86 23
96 23
67
67
67
66
66
66
66
66
66
12
D7 29
27 23
37 23
47 23
57 23
67 23
77 23
87 23
97 23
Weight per
foot (lbs)
0.30
0.53
0.85
1.25
2.25
3.55
5.15
7.00
9.20
L1
L2
Order details:
Threaded rod / Tie rod
type ...
d2
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
66
66
66
66
66
Type
(L / L1 / L2 please note at order)
67 10
10 23
67 20
20 23
67 30
30 23
67 40
40 23
67 50
50 23
23
23
23
23
23
Weight per
foot (lbs)
11.8
14.6
17.9
21.5
25.4
6.6
PRODUCT
GROUP
STRUCTURAL ATTACHMENTS,
TRAPEZES
CONTENTS
PAGE
____________________________________________ 7.4
3
4
5
6
PRODUCT
GROUP
8
9
7.0
Product Group 7
As well as trapezes, the components of
Product Group 7 include attachment elements
connecting directly to the structure, such as
trapezes.
The permissible loads correspond with the
load table for statically determined components on page 0.5 of the Technical
Specification.
Type 73
Type 74
Type 75
For protection against corrosion, the components are coated with a weldable primer
(1.18mil [30m] ) or electrogalvanized and
then yellow chromatized (zinc thickness
0.59mil [15m] ). The trapeze sections are
coated to the LISEGA standard.
Material certification can be supplied for all
components on request.
7.1
Type 76
Type 78
Weld on clevis
type 73 29 13 to 73 50 12
Material: carbon steel
Drop forged
Type
A
d1
min.
Seam (leg length)
73 29 13
73 39 13
73 49 13
73 59 13
73 69 12
73 79 12
73 89 12
73 99 12
73 10 12
73 20 12
73 30 12
73 40 12
73 50 12
1 5/8
2
2 1/2
3
3 3/4
4 3/4
4 3/4
4 3/4
5 7/8
3
6 /4 x 67/8
63/4 x 67/8
57/8 x 71/2
71/8 x 85/8
0.48
0.63
0.79
0.95
1.30
1.58
1.78
1.97
2.37
2.76
2.76
3.15
3.55
13/8
15/8
2
23/8
31/2
43/8
43/4
51/8
51/2
57/8
57/8
63/4
75/8
7/
16
5/
8
3/
4
13/
16
11/16
11/4
17/16
15/8
115/16
25/16
25/16
23/16
21/2
23/8
23/4
31/2
41/8
47/8
51/2
61/2
71/4
81/4
95/8
95/8
9
91/2
13/8
13/4
21/4
25/8
31/8
35/8
43/8
43/4
57/8
61/2
61/2
57/8
61/2
1
11/4
13/4
21/8
21/2
31/8
31/2
37/8
43/4
63/4
63/4
57/8
71/8
3
3
31/2
43/8
3/
16
3/
16
3/
16
3/
16
1/
4
1/
4
5/
16
7/
16
1/
2
9/
16
5/
8
3/
4
13/
16
Weight
(lbs)
0.7
0.9
2.4
4.6
8.4
15.0
20.3
24.5
40.8
82.0
82.0
84.0
128.0
Order details:
Weld-on clevis type 73 .. 1.
Type
d3
75 D1 19
75 21 12
75 31 12
75 41 12
75 51 12
75 61 12
75 71 12
75 81 12
75 91 12
75 10 12
75 20 12
75 30 12
75 40 12
75 50 12
11/8
13/8
13/4
23/8
21/2
31/8
37/8
43/4
51/8
57/8
63/4
71/8
85/8
97/8
0.41
0.49
0.64
0.80
0.96
1.33
1.61
1.81
2.00
2.40
2.79
2.79
3.18
3.58
15/8
13/4
2
21/8
23/8
23/4
31/8
31/2
37/8
43/8
43/4
51/8
51/2
57/8
C
3/
7/
min.
Seam (leg length.)
S
4
8
11/8
11/2
15/8
2
21/2
3
31/8
31/2
37/8
43/8
43/4
53/8
1/
5/
16
3/
8
1/
2
5/
8
3/
4
1
11/4
11/4
15/8
13/4
13/4
2
23/8
3/
16
1/
4
5/
16
3/
8
7/
16
1/
9/
16
5/
13/
16
7/
8
11/16
13/16
11/16
11/8
Weight
(lbs)
0.22
0.28
0.52
1.00
1.44
2.76
5.18
8.60
10.20
17.00
23.40
27.80
40.80
60.60
Order details:
Weld-on eye plate
type 75 .. 1.
7.2
Type
Order details:
Spher. washer with
weld-on plate
type 74 .. ..
7.3
74 D1 19
74 21 13
74 31 13
74 32 13
74 33 13
74 41 13
74 42 13
74 43 13
74 51 23
74 52 23
74 61 23
74 62 23
74 71 23
74 72 23
74 81 23
74 82 23
74 91 23
74 92 23
74 10 13
74 20 13
74 30 13
74 40 23
74 50 13
for
rod
3/ UNC
8
1/ UNC
2
5/ UNC
8
5/ UNC
8
5/ UNC
8
3/ UNC
4
3/ UNC
4
3/ UNC
4
1 UNC
1 UNC
11/4 UNC
11/4 UNC
11/2 UNC
11/2 UNC
13/4 UNC
13/4 UNC
2 UNC
2 UNC
21/4 UNC
21/2 UNC
23/4 UNC
3 UNC
31/4 UNC
A
B
23/8
23/4
23/4
33/4
51/8
23/4
33/4
51/8
33/4
51/8
51/8
63/4
51/8
63/4
51/8
63/4
51/8
63/4
87/8
97/8
97/8
113/4
133/4
1
11/8
11/8
11/8
13/8
13/8
13/8
13/4
13/4
21/4
21/4
25/8
25/8
31/8
31/8
35/8
35/8
4
43/4
5
53/8
6
7/
8
D
5/
8
3/
4
1
1
1
11/8
11/8
11/8
13/8
13/8
13/4
13/4
2
2
23/8
23/8
25/8
25/8
3
31/2
33/4
37/8
43/8
d4
max. F
13/
32
17/
32
21/
32
21/
32
21/
32
13/
16
13/
16
13/
16
11/32
11/32
19/32
19/32
117/32
117/32
125/32
125/32
21/32
21/32
29/32
219/32
225/32
31/32
39/32
7/
16
11/
16
11/
16
13/
16
13/
16
3/
4
7/
8
7/
8
15/
16
15/
16
17/16
17/16
11/2
11/2
15/
13/8
11/2
13/4
13/4
13/4
17/8
17/8
17/8
21/8
21/8
21/4
21/4
23/4
23/4
31/2
31/2
45/8
45/8
51/2
57/8
61/4
61/4
7
3/
8
3/
8
5/
8
5/
8
5/
8
3/
4
3/
4
3/
4
7/
8
7/
8
11/8
11/8
11/4
11/4
11/2
11/2
15/8
15/8
5/
8
5/
8
7/
8
7/
8
7/
8
11/8
11/8
11/8
11/4
11/4
15/8
15/8
3/
8
5/
8
5/
8
3/
4
3/
4
5/
8
3/
4
3/
4
3/
4
3/
4
11/4
11/4
11/4
11/4
11/4
11/4
13/8
11/4
13/8
15/8
13/4
13/4
13/4
15/8
113/16
111/16
17/8
23/16
23/8
23/8
21/2
2
23/8
21/2
23/4
31/8
2
2
21/4
21/4
25/8
25/8
31/8
35/8
37/8
41/4
43/4
Weight
(lbs)
0.6
1.4
1.4
3.0
6.0
1.4
3.0
6.0
3.0
6.0
8.8
15.0
8.8
15.0
8.8
15.0
10.0
15.0
30.6
43.2
48.6
70.2
95.4
BEAM CLAMP
TYPE 78
Beam clamp
type 78 21 11 to 78 71 11
Type
d3
78 21 11 0.65
78 31 11 0.81
78 41 11 1.00
78 51 11 1.34
78 61 11 1.60
78 71 112.00
A
31/8
31/8
47/8
47/8
71/8
71/8
E0 up to beam dim. b=
315/16 415/16 51/2 71/16 811/16 101/4 1113/16
21/2 21/2 21/2 3
33/8
113/16 31/4
21/8 21/8
23/4
tmax
5/
16
3/
8
9/
16
9/
16
13/
16
13/
16
5/
8
13/
16
1
1
13/16
13/16
Weight
(lbs)
1.8 - 3.6
4.4 - 8.0
14.8 - 19.6
15.0 - 21.0
39.0 - 43.6
40.2 - 45.8
Order details:
Beam clamp
type 78 .1 11 beam size
TRAPEZE
TYPE 79
Trapezes for small loads and
pipe diameters 31/4 inch
type 79 C2 37 to 79 42 37
31/4
Type
Lmax
79 C2 37
79 D2 37
79 12 37
79 12 37
79 22 37
79 22 37
79 32 37
79 32 37
79 42 37
79 42 37
40
40
24
40
24
44
24
48
24
48
1
1
1
1
13/8
13/8
13/8
13/8
13/4
13/4
11/2
21/2
21/2
3
3
3
3
4
4
5
b
7/
8
1
1
11/8
11/8
11/4
11/4
13/8
11/2
15/8
d4
7/
16
7/
16
7/
16
7/
16
9/
16
9/
16
9/
16
9/
16
11/
16
11/
16
Order details:
Trapeze
type 79 .2 37, L=...
7.4
TRAPEZE
TYPE 79
Trapeze
type 79 22 34 to 79 20 34
Order details:
Trapeze
type 79 .2 34, L=...
Load-
group
D-4
D-4
d3
0.81
0.81
3/
8
3/
8
79 42 34
3-4
0.81
1/
2
79 52 34
4-5
1.00
3/
4
79 62 34
5-6
1.34
13/
16
79 72 34
6-7
1.60
79 82 34
6-8
1.80
79 92 34
7-9
2.00
11/4
79 10 34
79 20 34
8 - 10
9 - 10
2.40
2.40
11/4
11/4
Type
79 22 34
79 32 34
s
L max
67
67
351/2
703/4
55
703/4
491/4
703/4
55
703/4
491/4
941/2
703/4
941/2
783/4
703/4
3/
3/
3/
15/8
15/8
15/8
15/8
21/8
23/8
21/2
23/4
31/8
33/8
31/2
33/4
33/4
4
4
4
6
6
6
6
8
8
8
8
10 1/4
10 1/4
12
12
12
51/2
51/2
51/2
71/2
71/2
81/8
81/8
91/2
91/2
97/8
97/8
13
13
133/4
133/4
14
Weight (lbs)
L=3feet +per 1inch
1.20
50
1.20
50
1.20
50
1.74
76
1.74
76
2.00
92
2.00
92
3.12
144
3.12
144
3.12
152
3.12
152
4.74
240
4.74
240
5.15
286
5.15
286
7.50
390
Trapeze
type 79 23 39 to 79 93 39
The permissible center load is
limited by the load group of the
individual trapeze (3rd digit of
type number).
The L max dimension 67 inch
& 703/4 inch of type 79 23 39 to
79 73 39 can be extended to
941/2inch by reducing the permissible load by 5% for every 4inch
of extension.
The trapeze is dimensionally
compatible with other components in the LISEGA modular
system within the load groups
specified.
Order details:
Trapeze
type 79 .3 39, L=...
7.5
Type
79 23 39
79 33 39
79 43 39
79 53 39
79 63 39
79 73 39
79 83 39
79 93 39
Load-
group
D- 4
D- 4
3- 5
4- 6
5- 7
6- 8
6- 9
7 - 10
d3
0.81
0.81
1.00
1.34
1.60
1.80
2.00
2.40
L max
67
67
703/4
703/4
703/4
703/4
941/2
941/2
2
2
23/4
23/8
31/8
21/2
33/4
43/4
4
4
6
6
8
8
101/4
12
5 1/2
5 1/2
7 1/2
8 1/8
9 1/2
9 7/8
13
133/4
15/8
15/8
2
23/8
27/8
31/4
35/8
4
3/
8
3/
8
1/
2
3/
4
13/
16
1
1
11/4
Weight (lbs)
1 inch
L=3feet
50
1.20
50
1.20
80
1.74
96
2.00
152
3.12
154
3.12
258
4.74
316
5.16
7.6
BEAM ADAPTER
TYPE 76
For alterations or extensions to
pipe systems or structural steel
in existing plants, clamp connections are often preferred to welding for the necessary attachment
to the existing structure of pipe
supports or additional steel. The
use of this method is obligatory
when welding is ruled out for
safety reasons.
The long-lasting security of this
type of connection depends essentially on the condition of the contact
surfaces and the preset forces
applied. For a reliable connection,
the specific design of the clamp
elements used is decisive.
Beam adapter
type 76 D2 11 to 76 42 11
Type
76 D2 11
76 22 11
76 32 11
76 42 11
Order details:
Beam adapter
type 76 .. 11
7.7
Bolts A193B7
support load
torque value
(lbs)
(lbs ft)
560
1350
1900
3370
25
50
110
220
17/8
21/4
23/4
33/8
13/16
11/2
17/8
15/
3
16 /8
1/
2
5/
8
3/
4
d2
UNC
UNC
UNC
UNC
min
11/4
11/2
13/4
21/8
max
11/2
13/4
21/8
25/8
Dimensions
Weight (lbs)
76 D2 11 - 065
76 D2 11 - 080
76 D2 11 - 100
76 22 11 - 070
76 22 11 - 090
76 22 11 - 120
76 32 11 - 090
76 32 11 - 120
76 32 11 - 150
76 42 11 - 120
76 42 11 - 150
76 42 11 - 180
M10 x 65
M10 x 80
M10 x100
M12 x 70
M12 x 90
M12 x120
M16 x 90
M16 x120
M16 x150
M20 x120
M20 x150
M20 x180
0.13
0.15
0.17
0.19
0.22
0.27
0.42
0.51
0.60
0.85
1.00
1.12
The hardened contact elements have a rounded grooved profile which presses into the
contact surface on tightening. This provides
a form-fit grip which offers mechanical security against shifting in any direction.
Cross connection:
The safe connection of beam sections to
each other is simple effected with an inlay
plate and eight LISEGA beam adapters. The
load capacity of a cross connection is given
in the table below.
Cross connection
Thickness of
intermed. plate
3/
8
1/
2
5/
8
3/
4
7.8
lift-off restraints
Order details:
Lateral guide
type 76 00 1.; b =
Order details:
Lateral guide with lift-off
restraint
type 76 00 2. - 49 .. ..
(Clamp base type); b =
type with
lift-off restraint
76 00 11
76 00 21
76 00 12
76 00 22
76 00 13
76 00 23
76 00 14
76 00 24
Type
torque
value (lbs/ft)
25
50
110
220
Fx
(lbs)
225
380
630
1060
Fz
(lbs)
790
1010
1460
1460
a1
a2
bmin
1 3/16
1 3/16
1 5/8
1 5/8
2
2 3/ 8
3 1/8
3 1/8
1 5/8
2
2 1/2
2 7/8
1 5/8
1 3/4
2 1/8
2 1/2
tmax
5/
8
11/
16
13/
16
0.34
0.53
0.78
0.78
3.7
6.2
10.8
15.9
The guides can be supplied if required with an additional lift-off restraint (width: 31/8 inch [80mm])
(when ordering, give details in addition to designation of clamp base type).
Fz: the permissible short-term lift-off load is limited to 10% of the respective clamp base nominal load.
Lmin = Zero
Order details:
Cantilever with beam
adapters
type 76 .1 16;
b=L=
7.9
Type
76 C1 16
76 D1 16
76 11 16
76 21 16
Lmax = b/2 + c
torque value
(lbs/ft)
25
50
110
220
axs
1 5/8
2 1/2
3
3 1/8
x
x
x
x
1/
4
1/
4
5/
16
3/
8
bmin
bmax
d4
tmax
1 5/8
2
2 3/16
2 1/2
11 3/4
11 3/4
11 3/4
11 3/4
1 5/8
1 3/4
2 1/8
2 1/2
7/
16
7/
16
9/
16
11/
16
1
1 3/4
1 7/8
2 1/8
5/
8
11/
16
13/
16
Weight (lbs)
Weight (lbs)
+per inch
2.0
3.8
6.4
9.8
0.20
0.34
0.51
0.60
L b/2 + c
torque value a
(lbs/ft)
76 C1 17
25
1 5/8
76 D1 17
50
2 1/2
76 11 17
110
3
76 21 17 220
3 1/8
Type
x s bmin c d3 e
E tmax
x 1/4 113/16
x 1/4 2 3/16
x 5/16 2 1/2
x 3/8 2 7/8
3/ 5/
4
8
3/ 11/
4
16
1 13/16
15/8
13/4
21/8
21/2
7/
16
7/
16
9/
16
9/
16
7/
8
1
11/8
11/8 1 1
31/4
43/4
41/8
43/8
53/4
Weight (lbs)
for b=4 inch
113/4 L=4 inch
+per
inch
15
15
15
13
0.20
0.34
0.51
0.60
2.3
4.2
6.8
10.1
Order details:
Cantilever with beam
adapter
type 76 .1 17;
b=L=
APPLICATION EXAMPLES
LISEGA beam adapters can be used in combination with all components suitable for
seating or flanging on beams. Here are two
further typical examples with LISEGA standard components:
Clamp base as fixed point
7.10
LICAD
EASYSTEEL
PRODUCT
GROUP
CONTENTS
PAGE
3
4
5
6
7
PRODUCT
GROUP
9
8.0
LICAD
EASYSTEEL
8.1
LICAD
8.2
pipe diameter
temperature of the medium
operating load
travel
installation height
support configuration
8.3
8
The fully designed support with detailed bill
of material
Interference checks
For larger plant projects, the design of the
building structure, including steelwork, main
components and piping, is carried out via
3D CAD programs, such as PDS/Microstation
(Intergraph), Plant Space (Bentley) or PDMS
(CADCENTRE). Planning continuity, as well as
the need to consider possible interferences,
necessitate the inclusion of the pipe supports in the process. Using defined interfaces,
LICAD support designs can be transferred
with no additional effort three-dimensionally
and true to scale into the leading CAD
programs .
The standard LICAD drawings are automatically
transposed into 3D using special data files.
Auxiliary steelwork
LICAD creates ready to install load chains
from standard supports, from the building
connection right through to the pipesurrounding attachment. In order to produce
the connection to the existing structure,
supplementary auxiliary structures are frequently required.
Via a special interface, the appropriate LICAD
designs are transferred to a separate CAD
program (e.g. AutoCAD), where they can be
supplemented as desired. In most cases,
where designs are not to complicated,
EASYSTEEL (see page 8.5) offers the ideal
solution.
8.4
EASYSTEEL
The ideal task when designing pipe supports is to connect a pipe directly to the
existing plant structure.
However, due to the given
support positions, in most
cases the existing plant
structure does not allow a
suitable connenction. The
support designer is then
required to plan additional
secondary steel, so-called
auxiliary structures.
Standard supports
With LICAD, the most appropriate support
configurations in each case are determined,
then the corresponding standard supports in
all their individual elements selected. A support drawing, parts list and 3D model can all
be automatically generated using this
system. If the standard supports cannot be
connected directly to the existing plant structure, the next step is to use additional steel
elements for the necessary adaptation.
Planning secondary steel
Although this steel may consist of only 1 or
2 items, each design is invariably unique, its
manufacture being both labour-intensive and
costly using traditional techniques.
Creating the design and producing a drawing
and a bill of materials with the cut lengths
and economic load calculations requires a
significant amount of time, even for simple
designs.
With EASYSTEEL, LISEGA has now developed
a powerful tool to reduce this time to a minimum and improve the quality of the design
process. At the same time it ensures interface
compatibility for electronic integration. The
new LISEGA EASYSTEEL design program is a
logical complement to the LISEGA modular
system and the LICAD program.
40
20
75 51/2
7.3 kips
X = 0.86 inch
Y = 1.45 inch
Z = 1.70 inch (UP)
790F
31/4
66
Concept sketch
The program can be used either independently or in conjunction with data imported
from a LICAD file. The user is guided menucontrolled through the design process, using
easy selection screens.
EASYSTEEL provides the user with the most
frequently used forms of steel designs as
basic elements. The most common connection types are also supplied. The user selects
the appropriate design shape from the corresponding selection screens and puts in
the relevant dimensions and interface data.
The program then suggests beam sizes that
are compatible in dimension and loading
with the LISEGA attachment component. A
further feature is the possibility of adaptation
to the surrounding structure.
After the user has decided on the preferred
section size, the program generates a true
to scale drawing with bill of materials and
cut list.
For the design elements available, EASYSTEEL contains a series of load capacity
data bases. The information needed for the
design-related selection of frame elements
regarding weld sizes or bolt dimensions can
be found here.
8.5
8
SPEZIAL FEATURES OF THE PROGRAM
Connection of the pipe support to the
secondary steel
All LISEGA standard elements that can be
attached to the secondary steel are included
as an option, e. g.:
weld-on eye plates, weld-on clevises,
types 73, 75
weld-on brackets, type 35
spherical washers, beam clamps,
types 74, 78
clamp bases, type 49
constant hangers with supports,
constant supports, types 11+71, type 16
seated spring hangers,
spring supports, types 25, 26, 29
U-bolts, type 40
weld-on pipe shoes, stanchions,
types 57, 58
roller bearings, types 51, 52, 53
beam adapters, type 76
8.6
//////
//////
//////
//////
//////
//////
Beam systems
The program allows the selection of beam
arrangements most commonly used for
secondary steel designs as standard:
beam between two
existing structures
//////////////
/////////////
//////
//////
//////////////
///////////////
American Profiles
USA
C4x7.25
C12x30
W4x13
W12x79
W6x9
W14x38
L2x2x0.25
L4x4x0.375
TS3x3x0.25
TS8x8x3/8
8.7
Section sizes
The program uses virtual section sizes and
covers a sufficiently wide range of commonly
used beam sections for various countries.
The list of programed beam sections considers American, European, Japanese and
Chinese standards. After determination of a
range of suitable steel sizes the designer can
decide which national standards shall be
used to generate the drawings.
///////////////
post types
Loading of beams is possible from above
or below.
////////////
//////////////
cantilever types
European Profiles
British Profiles
Height x Width
D, F
GB
approx.
Sections (Channels)
C102x51
100 x 50
U100
C305x102
300 x 100
U300
Wide flange sections
2*(C102x51)
100 x 100
HEB100
UC305x305
300 x 300
HEB300
Small flange sections
UB127x76
140 x 75
IPE140
UB356x171
360 x 170
IPE360
Angle sections
L50x50x6
50 x 50
L50x6
L100x100x12
100 x 100
L100x10
Square hollow sections
TS80x80x6
80 x 80
SHP80x6.3
TS200x200x10
200 x 200
SHP200x10
Internal
design.
SC10
SC30
SH10
SH30
SI14
SI36
SL05
SL10
SQ08
SQ20
8
Attachment to existing structure
The most common techniques for attachment
to the existing structure are available in the
program:
beam directly welded
beam with shim plates or beam with
end-plate to spread the load
beam with bolt-on plates
welded clip-angle connections
cut-out flange connection to fit inbetween
two beams (with or without end/shim plate)
beam end support on or under a roof
girder.
Options of
steel attachment
Weld sizes
The weld sizes selected by the program are
load compatible with the LISEGA modular
system whether the weld is measured in
throat thickness (mm) or leg length (inch,
acc. to American standard).
Weld sizes
Throat thickness 3 5
6
7
9 11 13 mm
Leg length
3/16 1/4 5/16 3/8 1/2 5/8 3/4 inch
Connection compatibility
Geometric checks are performed to avoid
designs which would not fit when assembled
on site. These checks include:
1. for welded attachments:
comparison of the width of the attachment
(incl. weld seam) with beam width
determination of the weld size suitable
for the section and attachment according to
prevailing rules and recommendations
2. for bolted connections:
selection of section sizes that allow compatibility of bolt holes with each other
8.8
8.9
8
A logical menu follow up
guides the user through
the design process
8.10
COMPONENT LIBRARIES
Component libraries
For further design in the 2D and 3D fields,
LISEGA component libraries are available for
the following CAD programs:
AutoCAD, Autodesk
PDS, INTERGRAPH
PDMS, CADCENTRE
SUPPORT MODELER,
Pelican Forge Corp.
NAVISWORKS, LightWork Design
The LISEGA catalog items (Standard Supports
2010) are available both as text and database files.
INTERFACES
2D application
Via a DFX export file, the support design incl.
dimensions can be transferred, with bills of
materials, location plans and letter heads as
an option, to CAD programs, e.g. AutoCAD
or MicroStation.
3D application
Via defined interfaces, the LICAD support
designs can be transferred true to scale and
without additional effort into the leading
CAD programs. Using the component libraries
as a basis, the standard CAD drawings can
be converted to 3D in the respective CAD
programs. Among others, this is possible
with:
PDS, INTERGRAPH
PDMS, CADCENTRE
SUPPORT MODELER, Pelican Forge
Corp.
NAVISWORKS, LightWork Design
Updates
LICAD, EASYSTEEL and other software packages are being constantly updated and expanded. The respective valid program versions and interfaces can be downloaded from
the LISEGA homepage. The necessary license
numbers are thereby issued to the user via
e-mail as an automatic function. Additional
numbers can also be supplied by phone.
8.11
VIEWER
8.12
EXTRA SERVICES
SERVICE
SERVICES
CONTENTS
PAGE
2
3
4
5
6
7
8
PRODUCT
GROUP
9.0
SUPPLEMENTARY SERVICES
PRODUCT GROUP 9
The LISEGA product program introduced in the
STANDARD SUPPORTS
2010 catalog corresponds
to current technological
developments in appropriate supports for piping
systems in industrial plant
construction.
The relevant international
requirements are satisfied
at the highest level.
9.1
9
9.2.6 Material certificates 3.1 B for special
components
Components affected by the direct flux of
force, e.g. the springs of constant and spring
hangers, can be supplied with material certificates acc. to EN 10204 - 3.1 B (not in US).
9.2.7 Complete traceability through CMTR
The complete traceability of material for all
catalog product components by way of separate manufacture is possible acc. to Certified
Material Test Report.
9.2.8 Pre-examination documents
The standardized products have largely been
qualified through independent authorities
(TV or VGB) by specified type and suitability
tests.
For special, particularly non-standardized
designs, pre-examination documents such as
design drawings, parts lists, calculations, test
sequence schedules and welding plans can
be supplied.
9.2.9 Stricter quality requirements
For fields of application with stricter security
and quality requirements, such as nuclear
installations, the quality assurance program
is applied at the highest quality level. All the
stages of order processing and handling follow recognized procedures corresponding to
the quality requirements of standard codes
and guidelines such as KTA or TV suitability
tests, as well as ASME Sect. III, NCA and NF.
The following aspects are particularly considered:
materials acquisition from approved
suppliers
Immersion painting
9.2
For easier handling and economical assembly on site, individual components can
however be supplied pre-assembled in load
chains, bundled and marked.
9.4.1 Preassembly of load chains
The load chains are pre-assembled according to support drawings and marked with
the support position number. Constant and
variable spring hangers, as well as larger
pipe clamps (bulky components), are kept
separate for easier handling and marked
accordingly.
Load chains, preassembled, bundled and marked
9.3
9
9.6.1 Inland packaging
Sturdy wooden crates or pallets fitted with
skids for fork-lifting are supplied for road or
rail transport.
9.6.2 Seaworthy packaging
Special wooden crates are used with skids
for fork-lifting and reinforced side walls for
crane operations. The inside of the crate lid
is covered with plastic sheeting to prevent
moisture ingression.
9.6.3 Further special types of packaging
can be agreed upon in detail.
9.7. Transport
If required, we can take responsibility for
the logistics of shipment of goods to the
site or other destinations (FCA, FOB, etc.)
Seaworthy packaging
9.4
9.5
9
The following engineering services are available according to requirements:
9.8.1 Design of support arrangements (load
chain designs) with LICAD:
The following data should ideally be supplied by the customer:
pipe diameter
loads
movements
temperatures
insulation thickness, if necessary
piping material
installation length and position, or
corresponding piping and structural plans
LICAD drawing
specifications
On the basis of these data, ready-to-install
load chains are generated with the LISEGA
design program LICAD from standard supports, from structural attachment right through
to pipe-surrounding component. The designs
so prepared are stored and printed out as
scale drawings, including parts lists with load
and material data. As an option, location
plans and pricing details can be included with
the LICAD drawings.
9.8.2 Generation of 2D CAD drawings without supplementary steel
For the preparation of 2D CAD drawings the
following information on the drawing layout,
in addition to the details in 9.8.1, is required:
drawing sheet in format DXF, DWG or
DGN
drawing numbers
location plans
9.6
9.7
9
9.8.6 Support design of 3D models in
PDMS
For the design of 3D pipe system supports
in the PDMS program, the customer makes
a PDMS model complete with pipe systems,
steel and all structural components available.
In addition, the data listed in 9.8.1 is
required for the design of pipe supports.
The support points, including the necessary
secondary steel, are planned and laid out
directly in the PDMS 3D model by experienced designers. LICAD provides the well-tried
basis for this. The load chains generated in
LICAD, transposed into 3D data, are integrated into the model with the aid of a PDMS
interface. Any secondary steel required can
be directly supplemented in PDMS.
Finally, an examination of possible obstructions
(interference check) is carried out in the 3D
model. The customer receives a complete,
fully checked 3D model with all planned
support positions and the relevant 2D draw-
3D PDMS display
3D PDS display
ings, including parts lists. The support drawings can also be generated in the 3D mode
if required.
9.8
LOADCASE
IN KNS
METER
X FORCE Y FORCE
X MOM.
Y MOM.
Z MOM.
9.9
9
2D support drawings and PDS 3D model
generated from them
9.10
ON SITE SERVICE
The operational safety of
pipe systems and therefore
the availability and long
life of the plants is dependent to a large degree on
the condition and functional
capacity of the supports
employed.
To avoid costly damage
and operational breakdown
the regular inspection of
thermal movement in
piping systems and the
condition of supports especially in older installations - is urgently advised.
9.11
9.12
9.13
11:11 Uhr
Seite 2
LISEGA - 2011
US
01.08.2013
US
Umschlag US 2011.qxp