Académique Documents
Professionnel Documents
Culture Documents
24
Section 2
Functional Description
Module 4
Hardware description DATA
3JK Edition 1.00
Blank Page
242
Document History
Edition
Date
01
2009-04-20
Author
Remarks
Grecchi Ilario
Objectives
Describe the Data boards of the 1850TSS-320 and
of the 1850TSS-160
243
Blank Page
244
Table of Contents
Page
245
17
Blank Page
246
247
1 x 10 Gbe board
ACRONYM
SLOTS
PP10GE
The PP10GE unit is a Layer 2 Packet Processor, able to collect & switch packets coming from one 10 GE XFPExtended module or XFP module with special adapter placed on the front panel. It supports Ethernet
service emulation over a T-MPLS transport network (PWE3 encapsulation) and enhanced QoS (8 CoS
mapped onto 8 queues..).
The total processing power is 10 Gbps. The over subscribed bandwidth is discarded.
The unit provides the following main features:
supporting of L2 Ethernet services (EPL, EVPL and EPVLAN service delivery model) over T-MPLS
Queue scheduling discipline based on Strict Priority and Weighted Fair Queuing methods
8 forwarding classes mapped onto 8 queues: Guaranteed classes associated to real time applications
which requires very low delay, jitter and loss; Regulated and Best Effort classes associated to not real
time applications and managed through 2 levels of frame drop probability
management of 10 Gb/s data traffic, full duplex, Flow control and MAC learning
The unit performs an optical to electrical conversion; it is provided with an electrical back panel interface
and an optical interface towards the client/line.
249
The Client/line interface is a bidirectional optical interface and provides the connection to the
client/network. The unit supports one B&W or WDM 10GE LAN or 10GE WAN interface; it is provided by an
external XFP (using XFP Adapter) or XFP-E.
XFPs are optical transceivers enabling the building of a unit with a client-oriented optical interface.The
optical receiver performs an optical-to-electrical conversion and vice versa the optical transmitter.
According to the XFP plugged, the following interfaces/standards are supported:
IEEE 802.3 10GBASE-S; 300 m reach, very short haul, operating wavelength is 850 nm
IEEE 802.3 10GBASE-L; 10Km reach, intraoffice, up to 9.4 dB link budget, operating at 1310nm
ITU-T G.959.1 P1L1-2D2 / GR-253-Core LR2 OC192; 80 km reach, long haul, at 1565 nm
ITU-T G.698.2 DW100U-2AXC: DWDM with APD detector, 80 km reach, operating in 3rd window.
10 x 1 Gbe board
ACRONYM
SLOTS
PP1GE
* SX, LX, ZX
The PP1GE unit is a Layer 2 Packet Processor, able to collect & switch packets coming from 10 x 1GE SFP
modules. It supports Ethernet service emulation over a T-MPLS transport network (PWE3 encapsulation)
and enhanced QoS (8 CoS mapped onto 8 queues..). The total processing power is 10 Gbps.
The unit provides the following main features:
supporting of L2 Ethernet services (EPL, EVPL and EPVLAN service delivery model) over T-MPLS
packet processing, performed via:
Queue scheduling discipline based on Strict Priority and Weighted Fair Queuing methods
8 forwarding classes mapped onto 8 queues: Guaranteed classes associated to real time applications
which requires very low delay, jitter and loss; Regulated and Best Effort classes associated to not real
time applications and managed through 2 levels of frame drop probability
management of 10 Gb/s data traffic, full duplex, Flow control and MAC learning
supported protocols: Ethernet, MPLS.
The unit performs an optical to electrical conversion; it is provided with an electrical back panel interface
and an optical interface towards the client/line.
2 4 11
The Client/line interface is a bidirectional optical interface and provides the connection to the
client/network. The unit supports ten FE or GE interfaces; they are provided by external SFP modules.
SFPs are optical transceivers enabling the building of a unit with a client-oriented optical interface.
The optical receiver performs an optical-to-electrical conversion and vice versa the optical transmitter.
According to the SFP plugged, the following interfaces/standards are supported:
m reach,
haul,
nm
IEEE 802.3 1000Base-S: 1.25Gbps, 550m (50/125m) or 275m (62.5/125m) reach, short haul, 850 nm
S-16.1 (G.957) / IR-1 OC48 (GR-253-Core) multirate (100 to 2700Mbps), 15 Km reach, 1310 nm
ITU-T G.695 C8S1-1D2: multirate CWDM (2M - 2.7G), PIN detector, 40 Km, short haul, 1470 to 1610nm
ITU-T G.695 C8L1-1D2: multirate CWDM (2M - 2.7G), APD detector, 80 Km, long haul, 1470 to 1610nm
SLOTS
PP10MS
The Unit acts as an "edge" between TDM traffic domain and packet-based domain, allowing to transport
packet data services over SDH/SONET physical layer, supporting TDM service emulation over T-MPLS
(PWE3 encapsulation) (future release). So it performs:
the mapping of Ethernet frames over SDH/SONET via VCAT, LCAS, GFP-F (EoS), to exchange Ethernet
frames between the Ethernet Network Processor of this unit and the Universal Matrix.
It allows the remotization of Ethernet flows, transporting them through the SDH network, to reach
remote Ethernet equipments. Its maximum throughput is 10Gbps (STM-64).
Neither SDH nor Ethernet physical interface (electrical or optical) is equipped on the front panel. As local
access is not provided, other SDH/Ethernet cards provide data flow via matrix cross-connections, passing
through back-panel connectors.
Each unit processes up to 10 Gbps data throughput.
The unit provides the following main features:
supporting of L2 Ethernet services (EPL, EVPL and EPVLAN service delivery model) and ATM
encapsulation over T-MPLS (future release)
supporting of VCAT, LCAS and GFP-F (as encapsulation method) for Packet/TDM mapping
Queue scheduling discipline based on Strict Priority and Weighted Fair Queuing methods
2 4 13
8 forwarding classes mapped onto 8 queues: Guaranteed classes associated to real time applications
which requires very low delay, jitter and loss; Regulated and Best Effort classes associated to not real
time applications and managed through 2 levels of frame drop probability
management of 10 Gbps data traffic, full duplex, Flow control and MAC learning
XS-642
XP1L12D2 (L-64.2)
Type
B&W
DWDM
OR
10GB
XI-641
XS-642
XL-642C
2 4 14
Type
ETHEMR:
EL TRX SFP 1000BASE-T
ANY DATAS: 1000B (SX/LX/ZX)
STM-16:
B&W
CWDM
SFP Module
Output
Input
Optical Cables
2 4 15
Blank Page
2 4 16
2 4 17
2 4 18
MT160 copy B
MT160 copy A
2 4 19
End of Module
Hardware description DATA
2 4 20