Académique Documents
Professionnel Documents
Culture Documents
constructive solutions
Uses
Conbextra EP10(M) is a two part epoxy resin system for
grouting gaps ranging from 0.25mm to 9mm. It is an all
liquid system consisting of a base and hardener.
Advantages
Conbextra EP10(M)
200C
300C
60
30
Exotherm
Moisture insensitive
Low creep characteristics
High compressive, tensile and flexural strengths
Fast, convenient pumping with early strength gain
Withstands a wide range of chemicals
Technical support
Application instructions
Properties
The following results are typical for the hardener grout at 30
deg.C.
Test method
Density (Kg/m3)
Compressive strength ( N/mm2)
ASTM D695
Tensile strength (N/mm2)
C307 - 94
Flexural strength (N/mm2)
BS6319 Part 4
Typical result
1060
60
ASTM
20
45
Chemical resistance
Conbextra EP10(M) is resistant to oil, grease, fats, most
chemicals, mild acids and alkalis, fresh and sea water.
Conbextra EP10(M)
Pot life
Ambient temperature affects the time for which bulk material
will remain fluid.
50
3-4
10
Cleaning
All tools and equipment should be cleaned immediately after
use with Nitoflor Sol. Spillages should be absorbed with
sand or sawdust and disposed in accordance with local
regulations.
Conbextra EP10(M)
Limitations
Temperature
During application
Grouting may be carried out without special precautions at
ambient temperatures from 50 to 350C.
Fire
In service
Estimating
Packaging
Additional information
Storage
Precautions
Health and Safety
Conbextra EP10(M) : Contains resins which may cause
sensitisation by skin contact. Avoid contact with skin and
eyes and inhalation of vapour. Wear suitable protective
clothing, gloves and eye/face protection. Barrier creams
provide additional skin protection. Should accidental skin
Fosroc products are guaranteed against defective materials and manufacture and are sold subject
to its standard terms and conditions of sale, copies of which may be obtained on request. Whilst
Fosroc endeavours to ensure that any advice, recommendation specification or information it may
give is accurate and correct, it cannot, because it has no direct or continuous control over where
or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products whether or not in accordance with any advice, specification, recommendation
or information given by it.
telephone
fax
++91 80-22240018/120
++91 80-22233474
india@fosroc.com
www.fosroc.com
Regional Offices
Bangalore
Mumbai
Delhi
Kolkata
208/209, Persepolis
Sector 17, Vashi
Navi Mumbai 400 703
Ph:022-2789 6412/14
Fax: 022 - 2789 6413
email:Mumbai@fosroc.com