Académique Documents
Professionnel Documents
Culture Documents
Catalogue
Table of Contents
GAVAN Group of Companies ............................................................................................................................... 4
Container Layout Drawing ..................................................................................................................................... 7
Door Parts ............................................................................................................................................................... 8
Bloxwich Door Parts ............................................................................................................................................ 10
Alternative Door Parts .......................................................................................................................................... 11
Door Gear Sets ..................................................................................................................................................... 12
Forged Handle Parts ............................................................................................................................................. 13
Pressed Handle Parts ............................................................................................................................................ 14
Reefer Door Parts ................................................................................................................................................. 15
Door Hinges: Dry ................................................................................................................................................. 16
Door Hinge and Lashing Ring .............................................................................................................................. 17
Door Hinges: Reefer ............................................................................................................................................. 18
Door Hinges: Pin .................................................................................................................................................. 19
Shipping Container Safety and Security ............................................................................................................... 20
ENFORCER Truck/Container Locking System ................................................................................................ 21
Security Seals ....................................................................................................................................................... 22
Container Flooring ................................................................................................................................................ 23
Masking Tape and Tarpaulins .............................................................................................................................. 24
Tarpaulin Products ................................................................................................................................................ 25
Door Gaskets ........................................................................................................................................................ 26
Door Gasket Set .................................................................................................................................................... 28
G-Strips and Loctite Gasket Glue ......................................................................................................................... 29
Decals: Individual letters and numbers ................................................................................................................. 30
Decals: Weight Panels .......................................................................................................................................... 31
Decals: General..................................................................................................................................................... 32
Decals: Base Plates ............................................................................................................................................... 33
CSC Plates & Inspection Stickers ......................................................................................................................... 34
Ventilators ............................................................................................................................................................ 35
Silicone ................................................................................................................................................................. 36
Abrasives: Cutting/Grinding ................................................................................................................................. 37
Abrasives: Sanding ............................................................................................................................................... 38
Drill Bits ............................................................................................................................................................... 39
Fasteners: Rivets ................................................................................................................................................... 40
Lock Bolts ............................................................................................................................................................ 41
Nuts & Bolts ......................................................................................................................................................... 41
Flat Sheets: Aluminium and Stainless .................................................................................................................. 42
Flat Sheets: Corten................................................................................................................................................ 43
Roof Panels ........................................................................................................................................................... 44
Wall Panels: Corten Side ...................................................................................................................................... 48
Wall Panels: Corten Front .................................................................................................................................... 49
Wall Panels ........................................................................................................................................................... 50
Door Panel ............................................................................................................................................................ 51
Corten Channels ................................................................................................................................................... 52
Corten Angles ....................................................................................................................................................... 53
Corten Headers ..................................................................................................................................................... 54
Page 2 of 105
Page 3 of 105
Page 4 of 105
Page 5 of 105
Page 6 of 105
Page 7 of 105
Door Parts
Following are the diagrams and part numbers for the standard parts of container door locking
equipment for both standard dry boxes and reefer containers. We have available most of the
variances that can be found to these standard parts. If you cannot find the part you want
please enquire with our staff.
LG10040
LG10553
LG10558
LG11028
LG12262
LG12272
LG60002
Hinge Lug
LG82000
LG83900
Antirack ring
LG84005/1
LG84006/1
LG84007
LG84011
LG84012
LG87001
LG87002
LG87003
LG87004
LG87006
LG87007
LG87008
LG87009S
LG87010S
LG87011
LG87030/1
Handle Hub
LG87031/1
Bush
LG87032
LG87033
LG87034
Handle (Forged)
LG87044
LG87105
Page 8 of 105
LG87106
LGBAR
LGBAR2
LGCIMC06022
LGDOORTIE
LGDOORLOCK
LGSETL
LGSETR
LGH-704
LGHF002
LGLASHRING
Lashing Ring
LGPIN
LGPIN2
LGRODL
LGRODR
MHINGEB
Page 9 of 105
Page 10 of 105
Page 11 of 105
LGSET contents
LG87001 x 1
LG87002 x 1
LG87033 x 1
LG87032 x 1
LG87031/1 x 1
LG12262 x 2
LG12272 x 2
LG87007 x 1
LG87008 x 1
LG87009S x 1
Door Gear Set
GAVAN Code: LGSET
LG87010S x 1
Page 12 of 105
Page 13 of 105
Pressed Handle
GAVAN Code: LG87044
Page 14 of 105
Page 15 of 105
Page 16 of 105
Page 17 of 105
Page 18 of 105
Page 19 of 105
Page 20 of 105
This unit is able to be adjusted in half inch locking increments around the lock rods of the
shipping container and truck trailer swing doors providing a "tight fit" on virtually all trailers
and containers. Adjusts from 24.13cm (9 inches) to 38.1cm (15 inches) from center of lock
bar to center of lock bar. Made from 10 gauge chrome plated spring steel this unit completely
conceals the shackle of the ABLOY High Security Padlock, providing maximum security
from physical attack preventing the use of bolt cutters. This lock can be keyed alike, different
or to a master system and combined with any of our other ENFORCER High Security
Locks.
Features: Portable, requiring no permanent installation, and includes the ABLOY padlock.
Page 21 of 105
Security Seals
At GAVAN we stock several types of security seals. These are all suitable for use on
shipping container, rail wagons, bonded stores and general application.
GAVAN
All of these seals are impossible to open without destroying or visibly damaging the seal,
therefore preventing theft and or contamination of goods in transit or storage.
Personal/Company seals available with a minimum order quantity required.
(1)
(2)
(3)
(4)
GAVAN can supply other Security Seals upon request. Minimum order quantities and lead
times apply for these product requests.
Page 22 of 105
Container Flooring
Container Plywood is manufactured to comply.
Please ask your branch for current certification
PLY FLOORING 28mm
(1)
(2)
(3)
(4)
GAVAN Code: DS65L Large Head Floor Screw 60mm Long x 16mm Head
GAVAN Code: DS60S Small Head Floor Screw 65mm Long x 12mm Head
GAVAN Code: DS60W Self Tapping Floor Screw 65mm Long x 12mm Head
GAVAN Code: PDRIVE Deck Screw Phillips Bit (P3) 31mm Long
GAVAN can supply other plywood sizes, as well as Bamboo Eco plywood, upon request.
Minimum order quantities and lead times apply for these product requests.
Page 23 of 105
TARPAULINS
We stock and can manufacture both 40ft and 20ft tarpaulins using especially imported 3.2m material.
Tarps supplied by GAVAN are 630gsm which comply with current ISO standards.
We also have plans of most of the tarps used and can dispatch throughout Australia.
We can make all types of container tarps as well as open side tarps.
Page 24 of 105
Tarpaulin Products
Page 25 of 105
Door Gaskets
Page 26 of 105
Page 27 of 105
Page 28 of 105
Flat G-Strip
Galvanised Steel
25mm x 2400mm x 1.0mm
GAVAN Code: GSTRIP
Angle G-Strip
Galvanised Steel
25mm x 10mm x 2400mm x 1.0mm
GAVAN Code: GSTRIP2
Page 29 of 105
100MM BLACK
100MM WHITE
100MM BLACK ON WHITE
50MM BLACK
50MM WHITE
50MM BLACK ON WHITE
GAVAN can produce any fleet decal to suit - just fax details for a quote.
Page 30 of 105
Page 31 of 105
Decals: General
Page 32 of 105
Page 33 of 105
Page 34 of 105
Ventilators
Page 35 of 105
Silicone
Neutral silicone
Low odour
Non Corrosive
Permanently flexible
Form waterproof/weatherproof seal
Grey
White
Sikaflex silicone
Sikaflex is a polyurethane sealant/adhesive that is
available in many grades in a cartridge or sausage
form. This item is a general purpose sealant that
is great for use on metal, rubber, wood and
plastic. This product is available in many grades
and strengths.
Available in two colours:
Black FC
Black
White
Page 36 of 105
Abrasives: Cutting/Grinding
ABRASIVES: CUTTING/GRINDING
Abrasives 102mm x 2.5mm Cutting
ABRASIVES: OTHER
Twist knot Cup brush 75xM10
For all other sizes or styles please contact your local branch for more information.
Page 37 of 105
Abrasives: Sanding
ABRASIVES: SANDING
Sanding Disc 100mm 24 Grit
For all other sizes or styles please contact your local branch for more information.
Page 38 of 105
Drill Bits
Page 39 of 105
Fasteners: Rivets
We currently stock a large range of rivets. Below is a list of the most common rivets we
stock. For all other rivets please contact your local sales representative so we can source this
product for you from one of our many suppliers.
Sealed Rivets
3/16 Sealed End Rivet (Stainless)
Blind Rivets
Blind Rivet Large Flange 4.8/16.7mm
Mono Rivets
Stainless Mono Rivet 3/16
Page 40 of 105
Lock Bolts
Page 41 of 105
Aluminium Sheet
1200mmx2400mm x 1.0mm
Aluminium Sheet
1200mmx2400mm x 1.2mm
Aluminium Sheet
1200mmx2400mm x 1.6mm
1200mmx2400mm x 1.0mm
1200mmx2400mm x 1.6mm
Page 42 of 105
Corten Sheet
Corten Sheet
Corten Sheet
Corten Sheet
Corten Sheet
Corten Sheet
Corten Sheet
Corten Sheet
Corten Sheet
Sheet sizes may vary occasionally please check the size you require when ordering. GAVAN
can cut any width and length as requested.
Page 43 of 105
Roof Panels
Page 44 of 105
Page 45 of 105
Page 46 of 105
Page 47 of 105
Available in 86 and 96
GAVAN can also manufacture any size patch to suit most panel profiles.
Please contact your local sales representative for more information.
Page 48 of 105
Available in 86 and 96
GAVAN can also manufacture any size patch to suit most panel profiles.
Please contact your local sales rep for more information.
Page 49 of 105
Wall Panels
Page 50 of 105
Door Panel
Page 51 of 105
Corten Channels
Corten channels are available in standard sizes listed below or manufactured to suit your
personal needs. Please quote outside measurements when ordering manufactured channels.
CORTEN CHANNEL
Corten Channel
45x80x45x2350x4.0mm
Corten Channel
50x100x50x2350x4.0mm
Corten Channel
45x122x45x2350x4.0mm
Corten Channel
75x122x45x2350x4.0mm
Corten Channel
50x158x30x2350x4.0mm
Page 52 of 105
Corten Angles
Corten angels are available in standard sizes listed below or manufactured to suit your
personal needs. Please quote outside measurements when ordering manufactured angels.
CORTEN ANGLE
Corten Angle
100x50x2350x4.0mm
Corten Angle
115x45x2350x4.0mm
Corten Angle
120x50x2350x4.0mm
Corten Angle
150x60x2350x4.0mm
Corten Angle
50x30x2350x6.0mm
Page 53 of 105
Corten Headers
Header Channel
112.5 x 113 x 137.5 x 2420 x 4.0mm
GAVAN Code: HEADERI
Header Plate
105 x 36 x 270 x 2420 x 4.0mm
GAVAN Code: HEADERO
Page 54 of 105
GAVAN can also manufacture non standard sills and rails to meet your requirements.
Please contact your local sales representative for more information.
Page 55 of 105
GAVAN can also manufacture non standard sills and rails to meet your requirements.
Please contact your local sales representative for more information.
Page 56 of 105
Corten Rails
Steel Flatbar
12mm x 50mm x 6000mm GAVAN Code: TOPRAILFB12
16mm x 50mm x 6000mm GAVAN Code: TOPRAILFB16
Page 57 of 105
Corner Posts
Page 58 of 105
Corner Castings
Corner Castings
Item weight: 11.5kg
High quality cast steel
Shot blasted and machined on all six sides
GAVAN Codes: CCBL, CCBR, CCTL & CCTR
A
Page 59 of 105
Flatrack Parts
Part Identification
Page 60 of 105
Inner Hinge
Inner hinge assembly
Available to suit 20 and 40 Flatrack
Page 61 of 105
Outer Hinge
Inner hinge assembly
Available to suit 20 and 40 Flatrack
LEFT or RIGHT
You must identify if the part is left hand or right hand. Please use the diagram below to
identify which hinge you require when ordering through GAVAN.
Page 62 of 105
Top Plates
LEFT or RIGHT
You must identify if the part is left hand or right hand. Please use the diagram below to
identify which hinge you require when ordering through GAVAN.
Page 63 of 105
Page 64 of 105
Locking Mechanisms
Please fill in the dimensions A, B, C and D to ensure we supply the correct locking bolt.
We also need to know if the Tapered pin has a V notch 0.5mm in its circumference.
Please fill in the dimensions A, B, C, D, E. F and G to ensure we supply the correct locking
bolt. We also need to know if the Tapered pin has a V notch 0.5mm in its circumference.
Page 65 of 105
Page 66 of 105
Page 67 of 105
Flatrack: Twistlock
Page 68 of 105
11mtr
13mtr
15mtr
Page 69 of 105
Transport Chain
9mtr Combo Buckets
(includes grab hooks)
8mm chain
GAVAN Code: RT-CHAIN8G70COM
10mm chain
GAVAN Code: RTCHAIN10G70COM
Chain by the Meter
8mm chain
GAVAN Code: RT-CHAIN8MMG70
10mm chain
GAVAN Code: RT-CHAIN10MMG70
Page 70 of 105
GAVAN currently carry three standard sizes of refrigerated container drain plugs.
All chains come with 200mm long pull chain.
DRAIN PLUGS
Top measurement
Base measurement
32mm
29mm
38mm
32mm
42mm
35mm
Page 71 of 105
Foam Products
Page 72 of 105
Page 73 of 105
Page 74 of 105
Page 75 of 105
Page 76 of 105
Page 77 of 105
102mm High
GAVAN Code: RFIB102
125mm High
GAVAN Code: RFIB125
Page 78 of 105
Page 79 of 105
Top Section
GAVAN Code: RFAFT & RFAFT1.8
Bottom Section
GAVAN Code: RFAFB & RFAFB1.8
Page 80 of 105
Reefer Panels
Page 81 of 105
Page 82 of 105
Page 83 of 105
Page 84 of 105
Reefer Covings
Page 85 of 105
Page 86 of 105
Page 87 of 105
Tank Parts
GAVAN Products has access to a very extensive range of suppliers and spare parts used for
the repair of tank containers as well as road tankers. Please contact your local branch for a
full brochure and prices on your tank part requirements.
Page 88 of 105
Odour Neutraliser
Page 89 of 105
Cargo Bars
Secure-A-Load Jacking Bars are the fast and easy way to secure your cargo
In a shipping container or for use in Trucks these light reusable cargo bars can be positioned
anywhere inside the container or truck. With a few clicks the bar is firmly positioned and
stops the movement of your cargo.
Page 90 of 105
Desiccants
Superdry container desiccants available in a hanging pole or convenient bags
Superdry desiccants absorb 130% of its own weight
Page 91 of 105
Page 92 of 105
1200 mm x 2100 mm
Features
Turbo Fill Valve
Benefits
Expands and contracts with change in temperature and altitude
Cost Savings as can be reused
Conforms to shape of cargo
Quick inflation
No sharp object required to deflate bag
Sidewall loading designed for maximum bracing
100% Recyclable
Custom sizes available
Custom logo printing on each vinyl dunnage air bag (Min order quantities apply)
Page 93 of 105
Inflator guns are avialbale in styles to suit both vinyl and paper
(1) Vinyl dunnage bag inflator gun
Inflates bag up to 4 times faster than any other bag on the market
Simply pull tab on valve for rapid deflation or use Turbo Filler to vacuum the air
out in seconds
Self-regulated, no gauging required and impossible to over inflate this bag
No tightening or turning required on this valve! Simply pull out tab on valve to
inflate and push in when bag is fully inflated! It's that easy!
The totally re-designed Turbo Filler is manufactured from a durable nylon
6 material, strong enough to withstand any dock handling
Page 94 of 105
All ramps are manufactured with a tough and durable 4mm thick box frame under section
with a 5.0mm thick chequer plate top.
For reefer ramps please contact your local branch to discuss options our standard size
available below.
2220mm Wide x 2700 Long x 218mm High
Page 95 of 105
Industrial Absorbents
Page 96 of 105
Page 97 of 105
Safety glasses
We can currently supply in three colours clear, smoke and amber.
Available in many styles upon request.
Clear
Smoke
Amber
Page 98 of 105
X-Large
Page 99 of 105
or its transport contractors delivery vehicle arrives at the Drop Spot; GAVAN reserves the right to
charge the Purchaser any costs which it incurs as a result of any delay by the Purchaser in unloading
the Goods or where unloading of the Goods cannot be effected, including, if applicable, a return
delivery fee at the prevailing freight rates; the unloading of Goods at a Drop Spot is the Purchasers
responsibility at its own cost and risk but GAVAN or its transport contractor may, without liability to
the Purchaser, unload the Goods at the Drop Spot if the Purchaser requests GAVAN to do so or is
absent from the Drop Spot at the time GAVAN or its transport contractor wishes to unload and, the
Purchaser releases and forever discharges GAVAN and its transport contractor from and against any
claim, cause of action or liability arising out of the unloading of Goods at the Drop Spot; where the
Purchaser attends GAVANs premises to acquire the Goods, GAVAN may, in its absolute discretion;
deliver the Goods into or onto or on the Purchasers vehicle in which case risk in the Goods passes to
the Purchaser and delivery is effected when the Goods are set down in or on the Purchasers vehicle;
or deliver the Goods by setting them down alongside the Purchasers vehicle in which case risk in the
Goods passes to the Purchaser and delivery is effected when the Goods are set down alongside the
Purchasers vehicle notwithstanding that GAVANs staff may, on request, assist the Purchaser to load
the Goods into or onto the Purchasers vehicle. Goods ordered for collection will be held for a
maximum period of 10 business days. Handling Safety GAVAN products may be sharp, heavy or
hazardous, therefore it is recommended that protective clothing, heavy-duty cut resistant gloves and
appropriate manual handling techniques or a lifting plan be used when handling material.
Material Safety Data Sheets are available on request from GAVAN. Where GAVAN or its transport
contractor enters the Purchasers premises or the premises of a third party nominated by the Purchaser
as a delivery point, the Purchaser releases GAVAN from any claim the Purchaser may at any time
have had against GAVAN but for this release in respect of damage occasioned to the Purchasers
premises or injury to persons arising out of the delivery by GAVAN or its transport contract or of
Goods to such premises; and indemnifies and holds GAVAN harmless from and against any loss,
damage or liability suffered or incurred by GAVAN in respect of damage occasioned to the third
partys premises or injury to persons arising out of the delivery by GAVAN or its transport contractor
of Goods to the premises of the third party except for and to the extent that such loss, damage or
liability suffered or incurred by GAVAN arises out of the negligence or wilful misconduct of
GAVAN or its transport contractor. Days after the specific collection date. If the Goods are not
collected by that time, they may be delivered to (at GAVAN's option) the Purchasers warehouse
location or store or to a store selected by GAVAN and all costs incurred by GAVAN in relation to the
holding and delivery of the Goods shall be charged to and be paid by the Purchaser. The Goods are at
the Purchasers risk from the time at which they are delivered to the Purchaser or its nominee.
The Purchaser shall not have any claim against GAVAN for damages or any other remedy for breach
of contract. Force Majeure shall mean an act of God, war, fire, strike, lockout, trade or industrial
disputes, government, interference, lack of production capacity or raw materials, transport delays,
accidents, breakdown of plant or machinery, non-delivery or shortage of supplies or any other cause
beyond GAVANs control. Non stock items are not returnable by the Purchaser to GAVAN. GAVAN
may in its discretion accept the return of stock items and in so doing may charge the Purchaser a
restocking charge The Purchaser shall not cancel any order received by the Seller without the consent
of the Seller first being obtained. In the event of the Seller agreeing to accept a return of the goods,
these shall be returned to the Seller at the expense of the Purchaser, and the Seller shall credit the
Purchasers account with an amount equal to ninety (90) per centum of the invoiced value of the
returned goods, less any expense incurred in having the goods returned or effecting and repairing any
damaged goods.
Unless otherwise agreed in writing by the Seller, the Purchaser shall pay the Seller the amount owed
for goods supplied to the Purchaser as set out on the Sellers invoice within twenty (20) days from the
end of the month in which the goods are supplied (the Due Date). The Seller extends no credit to
the Purchaser beyond the Due Date. In the event that the Purchaser fails to pay the total amount owing
in respect to goods supplied by the Due Date, the seller may require the Purchaser to pay the Seller by
way of liquidated damages a default charge being a sum which is calculated by the application of a
daily percentage rate of 12% compounded daily on the unpaid balance of the amount due from the
Due Date until the total is paid in full. GAVAN and the Purchaser may conduct business by
Version: 1.04 2015 AU
Electronic Data Interchange (EDI). The Purchaser agrees that if it has EDI capability with GAVANs
EDI is the preferred method of conducting business. GAVAN and the Purchaser agree that EDI will
be conducted in accordance with the terms of any Electronic Trading Partner Agreement to which
they are parties and into which these Conditions of sale are incorporated.
In the event of the Purchasers defaults under these Terms and Conditions, the Purchaser shall pay to
the Seller upon demand all costs and expenses including all recovery and legal costs (assessed on a
solicitor and own client basis) incurred by the Seller in the enforcement of its rights hereunder.
The liability of the Seller for damages out of the contract shall be limited to the costs of rectification
of any faulty workmanship or material other replacement of any faulty goods and the Seller accepts
no responsibility or liability whatsoever including liability for negligence, goods that do not
correspond with the description on the Sellers invoice and/or on the packaging of the goods sold or
any liability for consequential loss however arising.
All conditions and warranties contained in or implied by any statue or rule of law are hereby expressly
excluded and negated provided that nothing in these Terms and Condition shall exclude, restrict or
modify and condition, warranty, or liability which may at the time by implied where to do so is illegal
or would render any provision of the contract void.
Payments made by credit card may be subject to a surcharge. GAVAN is committed to ensuring that
credit card details collected from the Purchaser are stored in a secure manner. GAVAN will take
reasonable steps to protect the credit card details it holds from misuse and loss and from unauthorised
access, modifications and disclosure during the sale and payment of products and services to
GAVAN.
In cases where the Seller accepts the responsibility for delivery by rail, ship, aircraft or other vehicle,
the Purchaser will be responsible for the immediate examination of the goods supplied after the arrival
at their destination and in the event of any goods arriving in a damaged condition, the Purchaser must
notify the Seller in writing within seven (7) days of the delivery and all queries regarding goods
supplied, invoicing or shortages must be advised within seven (7) days of delivery. Where the Seller
accepts responsibility for delivery of the goods, the Seller shall not be liable to the Purchaser in
relation to any defective goods unless notice of such defectiveness has been given within seven (7)
days of receipt of the goods by the Purchaser. In the event of the Seller delivering the goods to the
Purchasers nominated carrier the Purchaser shall be responsible for the expense of that carrier, and
the Seller shall be liable only to replace defective or faulty goods and not goods damaged in transit.
Goods ordered shall be supplied ex-stock of the Seller but should the Seller be out of stock at the time
required for that delivery, any undelivered stock shall be placed on back order and delivered when
they become available, unless the Purchaser within two (2) working days of the receipt of the invoice
showing the back order, notifies the Seller that the Purchaser no longer requires such goods. No claim
for short deliveries will be accepted unless notified within seven (7) days of receipt of the goods.
Notwithstanding anything to the contrary express or implied in these Terms and Conditions:Retention of Title; The Purchaser agrees that legal and equitable title to the Goods is retained by
GAVAN until GAVAN receives payment in full from the Purchaser for the Goods and all other
monies owing by the Purchaser to GAVAN at any time. Property in all goods supplied by the Seller to
the Purchaser shall remain with the Seller and shall not pass to the Purchaser until the Seller has
received payment in full for the goods and until all outstanding debts owed by the Purchaser to the
Seller arising from the operation of the Account have been paid; Until such time as the Seller has
received payment in full for all the goods and until all outstanding debts owed by the Purchaser to the
Seller arising from the operation of the Account have been paid the Purchaser shall hold all the goods
bailee for the Seller and shall store and identify all the goods in a manner which enables them to be
clearly identified as goods to the Seller; In the event that the Purchaser commits an act of bankruptcy,
or where the Purchaser is a company has a receiver appointed to it or goes into liquidation, the Seller
shall be entitled to immediate possession of all the goods supplied by it to the Purchaser remaining at
the time in possession of the Purchase and is authorised to enter upon the Purchasers premises to
collect such goods without prejudice to any other rights of the Seller; If the Seller retakes possession
of any of the goods pursuant to the clause above mentioned, the Seller shall have the right to sell the
goods to any other party; If the Purchaser fails to make full payment for any goods supplied the cost
of recovering the full payment shall be borne by the Purchaser.
The Purchaser agrees to notify the Seller in writing of any change in ownership of the Purchaser
within seven (7) days from the date of such change and indemnifies the Seller against any loss or
damage incurred by it as a result of the Purchasers failure to notify the Seller of any change the
Purchaser and any associated person shall remain responsible to the Seller for the payment in full of
any amount due under the Contract for any goods or services ordered in the name of the Purchaser or
in the name of such associated person. All International ISO Container products supplied by the Seller
to the Purchaser shall be for use on internationally owned and operated shipping containers
temporarily imported into Australia, the Purchaser agrees to advise at the time of placing an order for
goods if they are to be used on containers which are not internationally owned and operated and
indemnifies the seller from and against any and all claims, suits, actions or demands, including, but
without limitation, demands for payment of excises, duties, taxes and charges, arising from the use of
the goods supplied on containers within Australia. Nothing in these Conditions shall constitute
GAVAN as a subcontractor of the Purchaser. GAVANs obligations are limited to those of a material
supplier.
The law applicable to the agreement between GAVAN and the Purchaser is the law of the State or
Territory in which the Goods are delivered. GAVAN and the Purchaser submit to the jurisdiction of
the relevant State or Territory courts.
2012-12-10-16:52:55