Académique Documents
Professionnel Documents
Culture Documents
Then you can find the procedure of painting inside, outside and agitator of the slurry tank b.
1. Tank Cleaning all inside ( paint remove ), we used brush disc, clothes and thinner
Pgina 2 de 31
2.
After cleaning all tank very good, we apply the first coat of paint H.B polyamide
epoxy primer on tank and agitator.
2.1 Tank Painting and report with positector device.
Pgina 3 de 31
manhole cover
Bottom
Pgina 4 de 31
side flap
side wall
Pgina 5 de 31
side wall
side wall
Pgina 6 de 31
Pgina 7 de 31
3. A After cleaning all tank very good, we apply the second coat of paint H.B
polyamide epoxy on tank and agitator.
3.1 Tank painting and report with positector device.
Pgina 8 de 31
Manhole
Pgina 9 de 31
Bottom plate
Pgina 10 de 31
Wall side
Pgina 11 de 31
side flap
Pgina 12 de 31
Pgina 13 de 31
Pgina 14 de 31
4. After cleaning all tank very good, we apply the third coat of paint H.B polyamide
epoxy on tank and agitator.
4.1 Tank painting and report with positector device.
Side plate
Pgina 15 de 31
Wall side
Pgina 16 de 31
Side plate
Pgina 17 de 31
Bottom plate
Pgina 18 de 31
Manhole cover
Pgina 19 de 31
Axis side
Pgina 20 de 31
Mixing paddles
Pgina 21 de 31
Mixing paddles
Pgina 22 de 31
5.
Tank Cleaning all outside small ring ( paint remove ), we used brush disc, clothes
and thinner
Pgina 23 de 31
Pgina 24 de 31
6. After cleaning very good, we apply the first coat of paint Epoxy polyamide zinc
on tank.
Pgina 25 de 31
Pgina 26 de 31
Pgina 27 de 31
7. After cleaning a very good, we apply the second coat of paint polyurethane on
tank
Pgina 28 de 31
Pgina 29 de 31
8. Finally completed
Pgina 30 de 31
Pgina 31 de 31
______________________
Made by : David Snchez
______________________
Approved by: J. H. Jung