Académique Documents
Professionnel Documents
Culture Documents
Third Semester
(B.E. Aeronautical Engineering / Automobile Engineering / Industrial Engineering /
Industrial Engineering and Management / Manufacturing Engineering / Mechanical
Engineering / Mechanical and Automation Engineering / Mechatronics Engineering /
Production Engineering)
Time: 3 Hrs.
(50)
(50)
(50)
(50)
(ii)
(iii)
(100)
(ii)
(iii)
(100)
5. Conduct an experiment on Gear Pump at constant speed and determine its maximum
efficiency and the corresponding discharge. Also draw the following characteristic
curves:
(i)
(ii)
(iii)
(100)
(ii)
(iii)
(100)
7. Conduct performance test on Pelton Wheel Turbine at constant speed and determine
its maximum efficiency. Also draw the following operating characteristic curves:
(i)
Discharge Vs Efficiency
(ii)
(100)
8. Conduct performance test on Francis Turbine at constant speed and determine its
maximum efficiency. Also draw the following operating characteristic curves:
(i)
Discharge Vs Efficiency
(ii)
(100)
9. Conduct performance test on Kaplan Turbine at constant speed and determine its
maximum efficiency. Also draw the following operating characteristic curves:
(i)
Discharge Vs Efficiency
(ii)
(100)
10. Conduct performance test on Pelton Wheel Turbine at constant head and draw the
following main characteristic curves:
(i)
(ii)
(iii)
(100)
11. Determine the coefficient of discharge of the given Orificemeter and draw the
following characteristic curves:
(i)
(ii)
(iii)
(100)
12. Determine the coefficient of discharge of the given Venturimeter and draw the
following characteristic curves:
(i)
(ii)
(iii)
13. (a) Determine the percentage error in Rotameter with actual flow rate.
(b) Determine the friction factor for a given set of pipes.
(100)
(50)
(50)
(50)
(50)
15. (a) Determine the mean efficiency of the given Centrifugal Pump.
(50)
(50)
16. (a) Determine the mean efficiency of the given Submersible Pump.
(50)
(50)
17. (a) Determine the mean efficiency of the given Reciprocating Pump.
(50)
(b) Determine the percentage error in Rotameter with actual flow rate.
(50)
18. (a) Determine the mean efficiency of the given Gear Pump.
(50)
(50)
19. (a) Conduct load test on Francis Turbine and determine its efficiency.
(50)
(b) Determine the percentage error in Rotameter with actual flow rate.
(50)
20. (a) Conduct load test on Kaplan Turbine and determine its efficiency.
(b) Determine the friction factor for a given set of pipes.
(50)
(50)
Marks Allocation
Aim /
Procedure
20
Experimental
Setup /
Tabulation
20
Readings /
Result /
Calculation
Graph
30
20
Viva-Voce
Total
10
100