SJ-20141209142030-013-ZXUR 9000 UMTS (V4.14.10.14) Radio Parameter Reference PDF

ZXUR 9000 UMTS
Radio Network Controller
Radio Parameter Reference

Version: V4.14.10.14
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: 800@zte.com.cn
LEGAL INFORMATION
Copyright 2015 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Additionally, the contents of this document are protected by
contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit the ZTE technical support website http://support.zte.com.cn to inquire for related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No.
Revision Date
Revision Reason
R1.2
2015-11-12
Modified the Value Range and Step of the following parameters:
R1.1
20150831
3.76.11 Time to Trigger
The following chapters are new added:

l
2.1.272 Switch for notify UE when LAC/RAC changed~

2.1.273 Son Transfer Response Switch between UMTS and
LTE
2.1.275 Switch for notify UE when LAC/RAC changed
2.2.147 Switch of Whether the UE receives the Active Set

Update Message by RLC ACK of the Message~2.2.149 Switch
of the PS suppression function of CSFB
2.116.30 Cell Individual Offset for Macro and Small Concurrent

Scenario
2.130.59 Switch of PS Domain DSAR for PS Load

Control~2.130.61 EDCH User Number High Load Threshold
2.176.99 Downlink Power Threshold for Releasing from High

Load Used for the Channel Type Decision when Controlling
the UE Transitioning from the PCH State~2.176.103 Downlink
Power High Load Threshold Used for the Channel Type
SJ-20141209142030-013|2015-11-12 (R1.3)
ZTE Proprietary and Confidential
Revision No.
Revision Date
Revision Reason
Decision when Controlling the UE Transitioning from the PCH
State
The following chapters are modified:
l
2.1.271 56GResPara56
2.1.174 The Switch for Attempting on CELL_FACH for the

Second Time for the Others category service during the RRC
Establishment Stage
2.1.276 GResPara56(bit3)~ 2.1.277 GResPara56(bit4)
2.2.150 Load Filter Coefficient
2.35.2 RRC Establishment Cause
2.35.4 Service Category Based on RRC Establishment Cause
2.42.26 Event 4B Counter Threshold for CELL_DCH to PCH

Shared by Uplink and Downlink
2.130.60 Maximum Number of EDCH User Migration from

EDCH to Uplink DCH Every Time~2.130.62 EDCH User
Number High Load Threshold
2.172.24 Whether Support PS(0kbps/0kbps)
2.176.104 The Switch for Attempting on CELL_FACH for the

Second Time for the Others category service during the RRC
Establishment Stage
R1.0
2014-05-31
Serial Number: SJ-20141209142030-013

Publishing Date: 2015-11-12 (R1.2)
First edition
Contents
About This Manual ......................................................................................... I
Chapter 1 Guide to Reading This Manual ................................................ 1-1
Chapter 2 RNC Radio Parameters............................................................. 2-1
2.1 UMTS Logical Function Configuration(URncFunction) .......................................... 2-6
2.1.1 RNC Configuration Object ID .................................................................... 2-6
2.1.2 Description .............................................................................................. 2-7
2.1.3 User Label ............................................................................................... 2-8
2.1.4 RNC Identity ............................................................................................ 2-9
2.1.5 Shared Network Mode .............................................................................2-11
2.1.6 Plmn Select Method for MOCN Network Sharing...................................... 2-12
2.1.7 Type of Transport Channel for Initial RRC Connection Setup..................... 2-13
2.1.8 GPS Information Root............................................................................. 2-15
2.1.9 Duration of Valid Cell Load Info ............................................................... 2-16
2.1.10 Downlink Non-Conversational Service Maximum MAC-d PDU Size
Extended.............................................................................................. 2-18
2.1.11 Downlink Conversational Service Maximum MAC-d PDU Size
Extended.............................................................................................. 2-19
2.1.12 Uplink Conversational Service Maximum Uplink RLC PDU Size .............. 2-20
2.1.13 Uplink Conversational Service Minimum Uplink RLC PDU Size ............... 2-22
2.1.14 Uplink Non-Conversational Service Maximum Uplink RLC PDU Size ....... 2-23
2.1.15 Uplink Non-Conversational Service Minimum Uplink RLC PDU Size ........ 2-24
2.1.16 HARQ RV Configuration ....................................................................... 2-26
2.1.17 Maximum Bit Rate with HS-SCCH Less for Non-VoIP/AMR..................... 2-27
2.1.18 Emergency Call Redirect Switch............................................................ 2-29
2.1.19 Inter-RAT V1+V2 Amr Cut Decision ....................................................... 2-30
2.1.20 Intra-RAT V1+V2 Amr Cut Decision ....................................................... 2-31
2.1.21 Switch of Non Emergency CS Service Access to CELL_FACH On
RRC..................................................................................................... 2-33
2.1.22 Timer for Shifting Inter-frequency Measurement and Inter-RAT
Measurement ....................................................................................... 2-34
2.1.23 DC-HSDPA Redirection Strategy Switch ................................................ 2-36
2.1.24 the Release UE Number when Band Exceeds Limit ................................ 2-38
2.1.25 Maximum Number of Retransmissions of the RRC CONNECTION
SETUP................................................................................................. 2-39
I
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.26 Interval of Retransmission of RRC CONNECTION SETUP...................... 2-40

RELEASE COMPLETE Message (N308)................................................ 2-42
RELEASE Message .............................................................................. 2-43
2.1.29 Max CS Delay ...................................................................................... 2-45
2.1.30 Delay Time Threshold of D/D->HS/D or HS/E after HS/D or HS/E
->D/D ................................................................................................... 2-46
2.1.31 Wait Timer for Adjusting Uplink and Downlink Reconfiguration by One
Step Upward......................................................................................... 2-48
2.1.32 Wait Timer for Adjusting Uplink and Downlink Reconfiguration by One
Step Downward .................................................................................... 2-49
2.1.33 Wait Time for RADIO BEARER RECONFIGURATION COMPLETE
when CELL_DCH to CELL_FACH.......................................................... 2-51
2.1.34 IU Uplink in Sequence Delivery Indicator whether According to
Indication from CN ................................................................................ 2-52
2.1.35 Lcs over Iur Support Indicator................................................................ 2-54
2.1.36 MBMS Multicast Mode Support Indicator................................................ 2-55
2.1.37 MBMS Enhanced Broadcast Mode Support Indicator.............................. 2-56
2.1.38 MBMS over Iur Support Indicator........................................................... 2-58
2.1.39 MBMS Channel Rate Support Indicator (8kbps)...................................... 2-59
2.1.40 MBMS Channel Rate Support Indicator (16kbps).................................... 2-60
2.1.43 MBMS Channel Rate Support Indicator (128kbps) .................................. 2-64
2.1.44 MBMS Channel Rate Support Indicator (256kbps) .................................. 2-65
2.1.45 Cpich Ec/No Minimum Threshold for Intra-Frequency Handover .............. 2-66
2.1.46 Cpich Rscp Minimum Threshold for Intra-Frequency Handover ............... 2-68
2.1.47 Timer for State Query ........................................................................... 2-69
2.1.48 CBS Function Switch ............................................................................ 2-70
2.1.49 Time of Arrival Window Startpoint for PCH ............................................. 2-72
2.1.50 Time of Arrival Window Endpoint for PCH .............................................. 2-73
2.1.51 Time of Arrival Window Startpoint for FACH ........................................... 2-75
2.1.52 Time of Arrival Window Endpoint for FACH ............................................ 2-76
2.1.53 Inactivity Time of E_FACH Transmission (T321) ..................................... 2-78
2.1.54 Cycle Length of Discontinue Receiving of E-FACH ................................. 2-79
2.1.55 Length of Receiving Frames in E-FACH DRX ......................................... 2-80
2.1.56 Indication of UE with Enhanced DRX ..................................................... 2-82
2.1.57 Timer for IU Release Resource ............................................................. 2-83
II
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.58 UTRAN DRX Cycle Length Coefficient................................................... 2-85

2.1.59 Inter-Frequency Balance Switch Based on Measurement........................ 2-86
2.1.60 Inter-Frequency Balance Switch Based on Measurement with
Overlapping or Covering Relation........................................................... 2-88
2.1.61 Timer of Deactivate Compressed Mode for Balance Strategy Based On
Measurement ....................................................................................... 2-89
2.1.62 The Time Threshold that the RNC May Resend the MEASUREMENT
CONTROL RELEASE ........................................................................... 2-91
2.1.63 The Target of UE Version for Heart Beat (R4) ......................................... 2-93
2.1.68 Heart Beat Period................................................................................. 2-99
2.1.69 The Switch Indicates whether Only Judge the Downlink Traffic on Heart
Beat for Channel Switching to PCH/IDLE...............................................2-100
2.1.70 BER Target Adjust Timer in Fast OLPC SIR Target Downward
Adjustment Based on BER ...................................................................2-102
2.1.71 Time of Waiting for RADIO LINK RESTORE INDICATION......................2-103
2.1.72 Time of Waiting for CELL UPDATE After RNC Sending Radio Link
Deactivation Command for RB Setup/Reconfiguration/Release
Response Timer Expiration...................................................................2-105
2.1.73 Waiting time length for ACTIVE SET UPDATE COMPLETE ...................2-106
2.1.74 Time of Waiting for RB Setup/Reconfiguration/Release Response over
Uu Interface.........................................................................................2-108
2.1.75 Time of Waiting for RRC CONNECTION COMPLETE............................ 2-110
2.1.76 Switch of Fast Reconfiguration Function When the HS Service Cell was
Changed ............................................................................................. 2-111
2.1.77 Waiting Timer for SRNS Context Request ............................................. 2-113
2.1.78 Waiting Timer for SRNS Data Forward Command.................................. 2-114
2.1.79 Waiting Timer of SRNS for IU RELEASE COMMAND while PS service
handover from 3G to 2G ....................................................................... 2-116
2.1.80 Network Resource Identifier Bit Num in CS Domain ............................... 2-117
2.1.81 Network Resource Identifier Bit Num in PS Domain ............................... 2-119
2.1.82 GBR of AMR Service Whether to be Reserved Indicator ........................2-120
2.1.83 Location Mode ....................................................................................2-121
2.1.84 QChat Support Indicator ......................................................................2-123
2.1.85 RNC Switch of Fast Return to E-UTRAN...............................................2-124
III
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.86 Target Cell Judgment Strategy for Access/Handover Algorithm in

Shared Network ...................................................................................2-126
2.1.87 HCS Support Indicator .........................................................................2-127
2.1.88 UE's Device Type Condition Whether to be Judged Indicator when
Heart Beat Detection ............................................................................2-128
2.1.89 CDT Overload Threshold .....................................................................2-130
2.1.90 Wait Time for RECONFIGURATION COMPLETE when UE Leaving
PCH or FACH State to Enter CELL _DCH State.....................................2-131
2.1.91 RRC on HS channel with MC (include DC) Indicator ..............................2-133
2.1.92 Switch of Using DL Power Control Request Information in Iur
Interface ..............................................................................................2-134
2.1.93 The Offset of CPICH Ec/No in Iur Interface Relative to the UE
Measurement Result ............................................................................2-136
2.1.94 Switch of URA_PCH/CELL_PCH for UE of Release 99 and Release
4 .........................................................................................................2-137
2.1.95 UTRA SI Switch ..................................................................................2-139
2.1.96 Application Service Detection Period ....................................................2-140
2.1.97 The Required Minimum Total Data Number in Application Service Type
Detection.............................................................................................2-142
2.1.98 DPI pending Time................................................................................2-143
2.1.99 User-defined PLMN Selection In Case of GWCN support Indicator .........2-144
2.1.100 Multiple PLMNs is allowed In MIB or not..............................................2-146
2.1.101 Switch of RNC Send RL SETUP and RRC CONNECTION SETUP in
Parallel when Setting up RRC CONNECTION .......................................2-147
2.1.102 The Routing Select Type for UE-Based ...............................................2-149
2.1.103 CS Service Threshold for energy conservation ....................................2-150
2.1.104 UE Threshold for energy conservation ................................................2-151
2.1.105 CS Service Threshold for Board Attribution switch ...............................2-152
2.1.106 UE Threshold for Board Attribution switch ...........................................2-154
2.1.107 Time to wait Service auto hang off before Board power off ...................2-155
2.1.108 Switch of Faster L1 DCH synchronization............................................2-156
2.1.109 CMP User Admission Control Threshold in Normal Running.................2-158
2.1.110 DMP User Admission Control Threshold in Normal Running .................2-159
2.1.111 Time of Waiting for CELL UPDATE After RNC Waiting ACTIVE SET
UPDATE COMPLETE/ RECONFIGURATION COMPLETE of Hard
Handover Timer Expiration UPDATE COMPLETE Timer Expiration.........2-161
2.1.112 Virtual LAC Paging Support Indication.................................................2-162
2.1.113 Additional Size for Uplink SIR Target Increasing When Consecutive
Error TB Occurs...................................................................................2-164
IV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.114 Valid Time Window for the TB in Shield Period.....................................2-165

2.1.115 The Waiting Timer for UE Handover When Board's Power is Off ...........2-167
2.1.116 Maximum Call Capacity......................................................................2-168
2.1.117 Maximum Data Process Capacity .......................................................2-169
2.1.118 Load Balance Parameter in MSC Pool ................................................2-170
2.1.119 Load Balance Parameter in SGSN Pool ..............................................2-172
2.1.120 Switch of Optimization When Load Balance Fail ..................................2-173
2.1.121 Switch of RNC Send RL SETUP and ACTIVE SET UPDATE Parallelly
when Soft Add Handover......................................................................2-174
2.1.122 Switch of DSCR in transferring unsuccessfully from Common Status to
CELL_DCH status................................................................................2-176
2.1.123 Imei blacklist Switch...........................................................................2-177
2.1.124 Son Transfer Response Switch...........................................................2-179
2.1.125 The period of RNC starting the SON Transfer. .....................................2-180
2.1.126 Son Transfer Request Number Threshold in one second......................2-182
2.1.127 Response the Son Transfer message Number Threshold in one
second ................................................................................................2-183
2.1.128 Inter System Handover with Consideration of Eutran Load Support
Indicator ..............................................................................................2-184
2.1.129 Number of Periodic Creating Cells ......................................................2-186
2.1.130 Number of Cells Updating SIB3 When Starting the DSAR according to
the Iu ..................................................................................................2-187
2.1.131 Time Interval Updating SIB3 among Cells When Starting the DSAR
according to the Iu ...............................................................................2-189
2.1.132 Number of Cells Updating SIB3 When Stopping the DSAR According
to the Iu and When Changing the DSAR Switch ....................................2-190
2.1.133 Time Interval Updating SIB3 among Cells When Stopping the DSAR
According to the Iu and When Changing the DSAR Switch ....................2-192
2.1.134 Multi-cell E-DCH Transport Bearer Mode.............................................2-194
2.1.135 Switch of Filtering the incomplete Neighboring Cells in SIB ..................2-195
2.1.136 Admission Control Switch for High Priority Traffic when Resource
Congestion ..........................................................................................2-197
2.1.137 Inter-frequency Handover Method.......................................................2-199
2.1.138 Inter-RAT Handover Method...............................................................2-200
2.1.139 Switch of Fast Reconfiguration Function for Relocating into DRNC .......2-202
2.1.140 The Switch for the EMI Function in CDT-CR ........................................2-203
2.1.141 Inter-rat Cell Information indication Strategy ........................................2-204
2.1.142 Paging Type1 Response Timer...........................................................2-206
V
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.143 Maximum Satellite Number in Position measurement Control

Message .............................................................................................2-207
2.1.144 Switch of Permit PS Handover from LTE to UTRAN Because of
CSFB ..................................................................................................2-208
2.1.145 Switch of Optimization When UCIU ERROR........................................2-210
2.1.146 Switch of Optimization When RL FAILURE.......................................... 2-211
2.1.147 Switch of whether to discard redirection LU-Reject/Attach-Reject when
the link of subsequent Iu is break ..........................................................2-213
2.1.148 Switch of DSAR.................................................................................2-214
2.1.149 Switch off Frequency Intelligently Function ..........................................2-216
2.1.150 RNC Switch for Handover Based on UL BLER ...................................2-217
2.1.151 RNC Switch for Handover Based on UE Tx Power...............................2-218
2.1.152 Smooth admission time when sscop congestion disappeared ...............2-219
2.1.153 IMEI Based Power Control Function Switch.........................................2-221
2.1.154 Enhanced Handover Switch ..............................................................2-222
2.1.155 LoggedMDT Switch ...........................................................................2-224
2.1.156 Switch of self configuration MicroNodeb ..............................................2-225
2.1.157 Switch of self optimization MicroNodeb ..............................................2-227
2.1.158 MicroNodeb Number Threshold Used for self configuration ..................2-228
2.1.159 MicroNodeb Number Threshold Used for self optimization....................2-229
2.1.160 Rnc Load Sharing In Pool Support Indicator ........................................2-231
2.1.161 Number of PSC to Reserve for Pico Cell .............................................2-232
2.1.162 Reserved PSC Number for Pico Cell...................................................2-233
2.1.163 Function Switch of Congestion Control of HSUPA vs R99 Fairness .......2-234
2.1.164 Function Switch of RoT Adjustment Dynamically .................................2-236
2.1.165 Partner Service Detection Period ........................................................2-237
2.1.166 The Required Minimum Total Data Number in Partner Service
Detection.............................................................................................2-239
2.1.167 Partner Service Detection Pending Time .............................................2-240
2.1.168 Function Switch Used for Switching Off Pico/Micro NodeB
Intelligently ..........................................................................................2-242
2.1.169 Timer of Waiting for CS RB Setup Response over Uu Interface when
voice needs to be ciphered ...................................................................2-243
2.1.170 LTE Handover Support Sharing Switch ..............................................2-244
2.1.171 Switch for Load Balance of FACH .......................................................2-246
2.1.172 The maximum number of inter-frequency neighboring cells in network
sharing ................................................................................................2-247
2.1.173 The Switch of PS Load Control on RNC Level .....................................2-248
VI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.174 Uplink Status Judgement Switch in HSPA Serving Cell Change

Procedure ...........................................................................................2-250
2.1.175 Global Reserved Parameter 1 ............................................................2-251
2.1.183 Global Reserved Parameter 10 ..........................................................2-260
2.1.184 Global Reserved Parameter 11...........................................................2-262
2.1.201 Global Reserved Parameter 52(bit9) ...................................................2-281
2.1.209 The protocol version that network element uses ..................................2-291
2.1.210 whether to Support Iur-g Signalling Procedure.....................................2-292
VII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.211 whether to Support PS Handover........................................................2-294

2.1.212 whether to Support DTM Handover.....................................................2-295
2.1.213 Switch of IUPS Call Admission Control................................................2-296
2.1.215 Global Reserved Parameter 4(bit0).....................................................2-299
2.1.225 Global Reserved Parameter 12(bit4) ................................................... 2-311
2.1.227 Global Reserved Parameter 12(bit15) .................................................2-314
2.1.239 Son Transfer Response Switch between UMTS ans LTE......................2-330
2.1.240 The period of RNC starting the SON Transfer. .....................................2-331
2.1.241 Son Transfer Request Number Threshold in one second......................2-332
2.1.242 Response the Son Transfer message Number Threshold in one
second ................................................................................................2-334
2.1.243 Number of PSC to Reserve for Pico Cell .............................................2-335
2.1.244 Reserved PSC Number for Pico Cell...................................................2-336
2.1.245 Adjust Period for CU Load Balance(Day).............................................2-338
2.1.246 High Load threshold for CU Load Balance...........................................2-339
2.1.247 Begin Time to Adjust NodeB for CU Load Balance ..............................2-340
VIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.248 Difference Load Threshold for CU Load Balance ................................2-342

2.1.249 Switch for UE Differentiation QoS .......................................................2-343
2.1.250 E-DCH User Number Share Switch for Multi-PLMN in RNC level ..........2-345
2.1.251 The Switch to Ensure PS Service Admission in Emergency Call CSFB
Process via PS Handover .....................................................................2-346
2.1.252 The Switch of Emergency Call Identification and Admission in Priority
in SRVCC Process...............................................................................2-347
2.1.253 Switch of Fast Dormancy Enhanced for Pre-R8 ...................................2-349
2.1.254 The CIO Adjustment Switch for the Macro Small Cell Load
Balancing ............................................................................................2-350
2.1.255 The RoT Adjustment Switch for the Macro Small Cell Load
Balancing ............................................................................................2-351
2.1.256 Inter System Redirection with Consideration of Eutran Load Support
Indicator ..............................................................................................2-353
2.1.257 Whether Soft Handover Is Supported between Macro Cells with
Different Transport Time Delay Grades over Iub.....................................2-354
2.1.258 Whether Soft Handover Is Supported between a Macro Cell and a
Small cell, or between Small Cells with Different Transport Time Delay
Grades over Iub ...................................................................................2-356
2.1.259 Switch of Iu Interface Interrupt Processing (Stop Broadcasting
PLMN(s) in MIB for Inaccessible Iu-CS or Set Cell Barred) .....................2-357
2.1.260 RNC Switch of Load Triggered Handover from UMTS to LTE ...............2-359
2.1.261 Camping Strategy Switch for RNC ......................................................2-360
2.1.262 The Switch of Releasing RRC Connection in the Admission Failure
from Cell_FACH to Cell_DCH ...............................................................2-362
2.1.263 The Switch of InterRAT Energy Saving................................................2-363
2.1.264 Son Transfer Response Switch between GERAN and UMTS ...............2-364
2.1.265 RNC Switch for Setting Power Ratio for Different PLMN.......................2-366
2.1.266 Switch of acquiring SPID based on IMEI .............................................2-367
2.1.267 Switch of the Power Control Algorithm for HSPA Subscriber in
Macro-Micro Soft Handover Condition ...................................................2-368
2.1.268 Switch for notify UE when LAC/RAC changed .....................................2-370
2.1.269 The Switch of High SRB Rate in CSFB Process via PS Handover ........2-372
2.1.270 RNC Switch for MRO from LTE to UMTS Based on RIM ......................2-373
2.1.271 56GResPara56 .................................................................................2-374
2.1.273 Son Transfer Response Switch between UMTS and LTE .....................2-377
2.1.274 The Switch for Attempting on CELL_FACH for the Second Time for the
Others category service during the RRC Establishment Stage ................2-379
IX
SJ-20141209142030-013|2015-11-12 (R1.3)

2.1.276 GResPara56 (bit3).............................................................................2-382
2.1.277 GResPara56 (bit4).............................................................................2-383
2.2 Extended Info of RNC(URncInfo)......................................................................2-384
2.2.1 FACH CAC Tolerable Minimum Bit Rate..................................................2-384
2.2.2 Extended Info of RNC Object ID .............................................................2-386
2.2.3 The Switch of CQI Feedback Cycle and CQI Repetition Factor
Adjustment Based on Load...................................................................2-387
2.2.4 Switch of the RRC Connection Access Strategy For Bad Coverage ..........2-388
2.2.5 AMR Initial Date Rate Decreasing in Bad Coverage Switch......................2-390
2.2.6 Filling SAI Corresponding with CELL Consuming Radio Resources
Indicator ..............................................................................................2-391
2.2.7 E-DCH Throughput Measurement Event 4B Counter Threshold for the
HS-DSCH/E-DCH to HS-DSCH/DCH Switching .....................................2-392
2.2.8 The Switch for ARP based BLER Function..............................................2-394
2.2.9 Default ARP Segment............................................................................2-395
2.2.10 ARP Threshold of Golden Subscriber Used in Power Control ................2-397
2.2.11 ARP Threshold of Bronze Subscriber Used in Power Control .................2-398
2.2.12 Load Filter Coefficient ..........................................................................2-400
2.2.13 User Number Filter Coefficient .............................................................2-401
2.2.14 Uplink Period BER Based OLPC Algorithm Switch.................................2-403
2.2.15 SIR Target Increasing Shield Algorithm Switch ......................................2-405
2.2.16 BER Filter Coefficient ..........................................................................2-406
2.2.17 Normal OLPC Algorithm Method ..........................................................2-407
2.2.18 Switch of RXLEV-NECELL indication in oldBSS_ToNewBSS..................2-409
2.2.19 Maximum Times of DMP reselection .....................................................2-410
2.2.20 The Adjustment Period for RoT Adjustment Dynamically........................ 2-411
2.2.21 Decrease Step for RoT Adjustment Dynamically....................................2-413
2.2.22 Increase Step RoT Adjustment Dynamically ..........................................2-414
2.2.23 HSUPA Rate Threshold for RoT Adjustment Dynamically.......................2-415
2.2.24 The Trigger Time of HSUPA in Low Rate State for RoT Adjustment
Dynamically .........................................................................................2-417
2.2.25 Time of Arrival Window Endpoint for Enhanced PCH transmission
channel ...............................................................................................2-418
2.2.26 Time of Arrival Window Startpoint for Enhanced PCH transmission
channel ...............................................................................................2-420
2.2.27 Switch for Improving EUL Power at UE Power Limitation in RNC............2-421
2.2.28 R5 and above UE RRC release mode...................................................2-423
X
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.29 Switch of Forbidding AMR Deceleration Triggered by Congestion

Control ................................................................................................2-424
2.2.30 Switch of Forbidding AMR Deceleration Triggered by Overload
Control ................................................................................................2-426
2.2.31 Switch for Whether the PS DRBC based on Traffic Volume is Prohibited
for CS+PS Scene.................................................................................2-427
2.2.32 Valid Time Threshold for PS DRBC based on Traffic Volume is
Prohibited for CS+PS Scene.................................................................2-429
2.2.33 Time of Waiting for Measure Report from MicroNodeb ...........................2-430
2.2.34 AMR Rate Control Switch after Relocation ............................................2-431
2.2.35 The number of CMP for handling paging ...............................................2-433
2.2.36 E-DCH MAC-d Flow Multiplexing List Switch .........................................2-434
2.2.37 EDCH Fallback Switch for Soft Handover CAC Failure ..........................2-436
2.2.38 Switch of Reconfiguration Procedure Optimization.................................2-437
2.2.39 Switch of Reconfiguration Procedure Optimization with Macro
Diversity ..............................................................................................2-439
2.2.40 Switch of overLoad control of CMP process ..........................................2-440
2.2.41 Switch of overLoad control based Qos ..................................................2-442
2.2.42 PS Handover Mode when CS is released for Eutran CSFB Multi-RAB
Service ...............................................................................................2-443
2.2.43 Timer of Deactivate Compressed Mode for Fast Return to Eutran...........2-445
2.2.44 Modify PLMN of NAS Message Switch..................................................2-446
2.2.45 Fill Cn Information IE in Uu Message or Not ..........................................2-447
2.2.46 Switch of CFN offset Optimization when signal on HSPA channel ...........2-449
2.2.47 Function Switch of ETTI Switch due to Congestion ................................2-450
2.2.48 PCH Barred User Relative Threshold....................................................2-452
2.2.49 Switch of CS Paging Resend in PCH Status..........................................2-453
2.2.50 Timer of CS Paging Resend in PCH Status ...........................................2-455
2.2.51 Improvement Switch for Security Mode Response Timeout in Uu
Interface ..............................................................................................2-456
2.2.52 Triggering Report Times for RoT Adjustment Dynamically ......................2-458
2.2.53 Cpich Ec/No Minimum Threshold for Inter-Frequency Handover .............2-459
2.2.54 Cpich Rscp Minimum Threshold for Inter-Frequency Handover ..............2-461
2.2.55 Inter-frequency Handover Penalty Timer ...............................................2-462
2.2.56 Switch of checking the UE E-UTRA Capability.......................................2-463
2.2.57 Iur Interface Interpolation Switch When QPSK Is Used ..........................2-465
2.2.58 Cell Access Control Switch When Queue is not Empty...........................2-466
2.2.59 Switch Used for Solving CPC Non-uniform ............................................2-468
2.2.60 Iur Interface Boosting Switch When QPSK Is Used................................2-469
XI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.61 PS Handover Mode when CS is released for Eutran SRVCC Multi-RAB

Service ...............................................................................................2-470
2.2.62 Timer for CSFB Identification................................................................2-471
2.2.63 CFN offset compensation value............................................................2-473
2.2.64 Switch for CFN offset compensation function.........................................2-474
2.2.65 Switch for Forbidding Increase SIR Target of HSUPA UE .......................2-476
2.2.66 Waiting Timer of Combining the Multi RL E-DCH FP to Release from
SIR Target Increase Forbidden State.....................................................2-478
2.2.67 Waiting Timer of No Uplink E-DCH FP to Release from SIR Target
Increase Forbidden State .....................................................................2-479
2.2.68 SIP Service Optimization Switch...........................................................2-481
2.2.69 Switch of Iu IE Higher bitrates than 16 Mbps flag" Function" ...................2-482
2.2.70 Intra-frequency Handover Penalty Timer ...............................................2-484
2.2.71 CPICH Ec/No Threshold for Redirection without Measurement...............2-485
2.2.72 CPICH RSCP Threshold for Redirection without Measurement...............2-486
2.2.73 Cpich Rscp Threshold for Neighbouring Cell Monitoring.........................2-488
2.2.74 Protect Timer of RAB Setup Response .................................................2-489
2.2.75 Time of Waiting for RB Setup Response over Uu Interface .....................2-491
2.2.76 Period of Cn Invoke Trace Location Measurement .................................2-493
2.2.77 Switch of Using Pre-Configurated PLMN in CS&PS Coordination ..........2-494
2.2.78 CSMT IE for CSFB Identification Switch................................................2-495
2.2.79 Switch of statistics the inter-board repeated RRC connection request
message .............................................................................................2-497
2.2.80 The volume threshold of statistics the inter-board repeated RRC
connection request message ................................................................2-498
2.2.81 Filter Coefficient used for the filter of equivalent User Number for PS
Load control ........................................................................................2-499
2.2.82 RNC Switch of Blind Handover from Large Coverage Cell to Small
Coverage Cell......................................................................................2-501
2.2.83 MicroNodeb Number Threshold Used for self configuration ....................2-502
2.2.84 MicroNodeb Number Threshold Used for self optimization .....................2-504
2.2.85 Time Accuracy for Smart Handover ......................................................2-505
2.2.86 Get BFN Switch...................................................................................2-506
2.2.87 Update BFN Period .............................................................................2-507
2.2.88 FACH CAC Tolerable Minimum Bit Rate for High Cell Load ....................2-509
2.2.89 The PS Wait Timer to Forbid DRBC in Emergency Call CSFB Process
via PS Handover..................................................................................2-510
2.2.90 ARP Priority Level to Identify Emergency Call in SRVCC Process ..........2-512
XII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.91 The RNC Lever Switch for Attempting Switching to the CELL_FACH
State After Congestion when PS RB Establishment................................2-513
2.2.92 Cpich Ec/No Minimum Threshold for MF-HSDPA Configuration ..............2-515
2.2.93 Cpich Rscp Minimum Threshold for MF-HSDPA Configuration ...............2-516
2.2.94 Period of Load Triggered Handover or Redirection from UMTS to
LTE .....................................................................................................2-518
2.2.95 Heavy Traffic Counter Threshold for Changing Preferred Camping to
Random Camping in Multi-carriers Network ...........................................2-519
2.2.96 Light Traffic Counter Threshold for Changing Random Camping to
Preferred Camping in Multi-carriers Network..........................................2-521
2.2.97 High Speed Signalling Switch for the UE from Common State to
CELL_DCH state Triggered by CS call .................................................2-522
2.2.98 Start Time for Switch Off Carrier for InterRAT Energy Saving..................2-524
2.2.99 End Time for Switch Off Carrier for InterRAT Energy Saving...................2-525
2.2.100 switch off Priority Indicator for UTRAN and LTE for InterRAT Energy
Saving.................................................................................................2-527
2.2.101 Switch of URA_PCH/CELL_PCH for R5 UE ........................................2-528
2.2.102 Switch for Releasing the Traffic Volume Measurement Before
Transferring to PCH .............................................................................2-529
2.2.103 Indicator for the Channel Selection Strategy of UEs Switching from
PCH to Other Channel..........................................................................2-531
2.2.106 Switch of URA_PCH/CELL_PCH for R8 and Post-R8 UE .....................2-535
2.2.107 The Target RRC State of Fast Dormancy (R99/R4) ..............................2-536
2.2.108 The Target RRC State of Fast Dormancy (R5) .....................................2-537
2.2.111 The Target RRC State of Fast Dormancy (R8 and R8 Post) ..................2-541
2.2.112 Indicator for Sending the Support Capability of Different HS-SCCH in
Consecutive TTIs to Node B for REL 8 UE.............................................2-543
2.2.113 Indicator for Sending the Support Capability of HS-SCCH Orders in
HS-SCCH-less Operation to Node B for R8 and Post-R8 Ues .................2-544
2.2.114 Indicator for Sending the Support Capability of Different HS-SCCH in
Consecutive TTIs to Node B for R9 and Post-R9 UE ..............................2-546
2.2.115 Switch of Filling Frequency and Scrambling Code in Uu Message
when Entering URA-PCH .....................................................................2-547
2.2.116 Switch of Supporting Iub "Puncturing Handling in First Rate Matching
Stage" IE .............................................................................................2-548
XIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.117 The occasion of send Relocation Detect message to CN in soft

handover relocation..............................................................................2-550
2.2.118 The switch for Uu measurement of measurement identity 11.................2-551
2.2.119 SRB DCH FP Payload CRC Indication ................................................2-553
2.2.120 CS DCH FP Payload CRC Indication ..................................................2-554
2.2.121 PS DCH FP Payload CRC Indication ..................................................2-555
2.2.122 SRB EDCH FP Payload CRC Indication..............................................2-556
2.2.123 CS EDCH FP Payload CRC Indication ................................................2-557
2.2.124 PS EDCH FP Payload CRC Indication ................................................2-559
2.2.125 Switch to Control Whether RNC Releases the UE and Redirects it to
GSM Network After the UE Setup RAB Fail. ..........................................2-560
2.2.126 Switch of Whether Report Error Information of Node B to CT and
CDT ....................................................................................................2-561
2.2.127 Switch of Whether the UE receives the Active Set Update Message by
RLC ACK of the Message.....................................................................2-562
2.2.128 Mode of Intra-Frequency Hard Handover ............................................2-564
2.2.129 Switch of the PS suppression function of CSFB ...................................2-565
2.2.130 Mode of the PS suppression function of CSFB ....................................2-566
2.2.131 Switch for handling sscop congestion .................................................2-568
2.2.132 Switch for Report PM event to SigTrace .............................................2-569
2.2.133 Switch for Rel-9(onwards) handling of DL secondary HS-DSCH
(de)activation state Support Indicator ....................................................2-571
2.2.134 Absolute Directed Retry Switch ..........................................................2-572
2.2.135 UE LTE Capability Judgement Switch .................................................2-573
2.2.136 Inter-band Balance Switch in RRC Stage ............................................2-575
2.2.137 Maximum Intra-Frequency Neighboring Pico Cells Number of Macro
Cell .....................................................................................................2-576
2.2.138 Maximum Inter-Frequency Neighboring Pico Cells Number of Macro
Cell .....................................................................................................2-578
2.2.139 Ho Report of Son Transfer Request Number Threshold in one
second ................................................................................................2-579
2.2.140 Switch for Inter Frequency MRO.........................................................2-580
2.2.141 Switch for Inter RAT MRO with GSM...................................................2-582
2.2.142 Switch for Inter RAT MRO with EUTRAN.............................................2-583
2.2.143 Indicate Whether Cell Update Message Triggered by SRB with the
cause of "RLC unrecoverable error" is Counted in MRO ........................2-585
2.2.144 Reporting Interval for MRO Strategy from LTE to UMTS Based on
RIM.....................................................................................................2-586
XIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.145 Measurement Timer for MRO Strategy from LTE to UMTS Based on
RIM.....................................................................................................2-588
2.2.146 The switch of controlling whether adopt GPS location for UE which
only support StandAlone location method ..............................................2-589
2.2.147 Switch of Whether the UE receives the Active Set Update Message by
RLC ACK of the Message.....................................................................2-591
2.2.148 Mode of Intra-Frequency Hard Handover ............................................2-592
2.2.149 Switch of the PS suppression function of CSFB ...................................2-594
2.2.150 Load Filter Coefficient ........................................................................2-595
2.3 Cpu Load Control Priority based on Qos (UCpuCtrlPri) ......................................2-597
2.3.1 Cpu Load Control Priority based on Qos Object ID ..................................2-597
2.3.2 Service Type of CPU load control ...........................................................2-598
2.3.3 Event Type of CPU load control..............................................................2-599
2.3.4 Cpu Load Ctrl Priority ...........................................................................2-601
2.4 Pico Son Configuration(UPicoSonMeasCfg)......................................................2-602
2.4.1 Pico Son Configuration Object ID ...........................................................2-602
2.4.2 Pico Measurement Report Trigger Criteria ..............................................2-603
2.4.3 Intra Measurement Interval ....................................................................2-604
2.4.4 Inter Measurement Interval ....................................................................2-606
2.4.5 GSM Measurement Interval ...................................................................2-607
2.4.6 The First Fixed Time Point to Trigger Measurement.................................2-608
2.4.7 The Second Fixed Time Point to Trigger Measurement ............................2-610
2.4.8 The third Fixed Time Point to Trigger Measurement................................. 2-611
2.4.9 Num of Initial Time Points ......................................................................2-613
2.4.10 Pico Minimum User Number Threshold .................................................2-614
2.5 Relation Adding Configuration(UANR) ..............................................................2-616
2.5.1 Relation Adding Configuration Object ID .................................................2-616
2.5.2 Minimum Neighboring Utran Cell's Cpich RSCP Threshold for Pico
Cell .....................................................................................................2-617
2.5.3 Minimum Neighboring Utran Cell's Cpich EcNo Threshold for Pico
Cell .....................................................................................................2-618
2.5.4 Minimum Neighboring GSM Cell's RSSI Threshold for Pico Cell ...............2-620
2.5.5 ANR Handle Mode ................................................................................2-621
2.5.6 Delete Neighbor Cell Period of Macro Cell ..............................................2-623
2.5.7 Delete Neighbor Cell Period of Pico Cell .................................................2-624
2.5.8 Minimum Neighboring Utran Cell's Cpich RSCP Threshold for Pico
Cell .....................................................................................................2-625
2.5.9 Minimum Neighboring Utran Cell's Cpich EcNo Threshold for Pico
Cell .....................................................................................................2-627
XV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.5.10 Minimum Neighboring GSM Cell's RSSI Threshold for Pico Cell .............2-628
2.6 RNC Pool Global Configuration (URncPool) ......................................................2-630
2.6.1 RNC Pool Global Configuration Object ID ...............................................2-630
2.6.2 The Check Period of RNC Load .............................................................2-631
2.6.3 The Valid time of RNC load ....................................................................2-632
2.6.4 The OverLoad threshold of Control Plane ...............................................2-634
2.6.5 The OverLoad threshold of User Plane ...................................................2-635
2.6.6 The Ratio for Reverse Relocation of CS..................................................2-636
2.6.7 The Ratio for Reverse Relocation of PS..................................................2-638
2.6.8 The Delay Timer After Reverse Relocation .............................................2-639
2.7 Reserved User Global Configuration (URsvdUeGlobalPara)...............................2-641
2.7.1 Reserved User Global Configuration Object ID........................................2-641
2.7.2 HS-SCCH Less Switch for Reserved User ..............................................2-642
2.7.3 DTX/DRX Switch for Reserved User.......................................................2-643
2.7.4 DL DPCH Initial Power Offset for Reserved User Relative to Normal
User....................................................................................................2-645
2.7.5 CS Reserved Specific Downlink Carrier Central Frequency Indicator ........2-646
2.7.6 Reserved User Forced Handover Switch ................................................2-647
2.7.7 Reserved Specific Frequency Strategy Switch.........................................2-649
2.7.8 PS Reserved Specific Downlink Carrier Central Frequency Indicator ........2-650
2.7.9 Non-Reserved CS User Strategy Switch in RRC Procedure .....................2-651
2.7.10 Non-Reserved PS User Strategy Switch in RRC Procedure ...................2-653
2.7.11 Switch of Reserved User Forbidden MR................................................2-654
2.7.12 Switch of Reserved User Released RRC when the only Remaining SRB
on D/E.................................................................................................2-656
2.7.13 Switch for Reserved User Identification .................................................2-657
2.7.14 User Drop Switch Triggered by Reserved User......................................2-659
2.7.15 Notification Switch for Reserved User Existing ......................................2-660
2.7.16 Lowest Priority of Neighbor Cell Notified of Reserved User Existing ........2-662
2.7.17 Switch of the DCH 27.2kbps Rate whether to be Used for Reserved
Users' Initial RRC Connection Setup .....................................................2-663
2.7.18 HSUPA TTI Configuration Method for Reserved Users...........................2-665
2.7.19 Switch of SRB Transport Channel Configuration Method for Reserved
Users ..................................................................................................2-666
2.7.20 Threshold of Ec/No Requested when HSUPA 2ms TTI is Configured for
Reserved Users ...................................................................................2-667
2.7.21 Reserved User State Transfer Switch ...................................................2-669
2.7.22 Switch of Faster L1 DCH synchronization function for Reserved User ......2-670
XVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.7.23 Reserved RUB Switch .........................................................................2-671

2.7.24 UE Version for Reserved RUB..............................................................2-673
2.7.25 Downlink Reserved Bandwidth for Reserved UE's I/B Traffic ..................2-674
2.7.26 Switch of expanding PDCP downlink buffer for reserved Users...............2-676
2.7.27 Upper Limit of PDCP downlink buffer for reserved Users........................2-678
2.7.28 Overbooking priority value for reserved users........................................2-679
2.7.29 Switch of Overbooking priority value for reserved users .........................2-681
2.7.30 TCP Optimization for the reserved user ................................................2-683
2.8 Diamond User Global Configuration (UDiamondUserGlobalPara) .......................2-684
2.8.1 Diamond User Global Configuration Object ID.........................................2-684
2.8.2 DL DPCH Initial Power Offset for Diamond User Relative to Normal
User....................................................................................................2-685
2.8.3 Switch of Diamond User Forbidden MR ..................................................2-687
2.8.4 Switch for Diamond User Identification....................................................2-688
2.8.5 Switch of the DCH 27.2kbps Rate whether to be Used for Diamond
User's Initial RRC Connection Setup .....................................................2-690
2.8.6 Downlink Reserved Bandwidth for Diamond UE's I/B Traffic .....................2-691
2.8.7 Switch of expanding PDCP downlink buffer for diamond Users.................2-693
2.8.8 Upper Limit of PDCP downlink buffer for diamond Users..........................2-694
2.8.9 Overbooking priority value for diamond users..........................................2-696
2.8.10 Switch of Overbooking priority value for diamond users .........................2-698
2.8.11 Switch of Congestion Control Strategy for Diamond Users in RRC
Connection Setup ................................................................................2-699
2.9 Common E-DCH in CELL_FACH State Configuration(UEdchRcFach) ................2-701
2.9.1 Common E-DCH in CELL_FACH State Configuration Object ID ...............2-701
2.9.2 Number of Reference E-TFCI (10ms E-TTI, E-TFCI Table0).....................2-702
2.9.3 Set of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0) ..........................2-704
2.9.4 Power Offset of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0)............2-705
2.9.5 Number of Reference E-TFCI (10ms E-TTI, E-TFCI Table1).....................2-707
2.9.8 Number of Reference E-TFCI (2ms E-TTI, E-TFCI Table0).......................2-712
2.9.9 Set of Reference E-TFCIs (2ms E-TTI, E-TFCI Table0)............................2-713
2.9.11 Number of Reference E-TFCI (2ms E-TTI, E-TFCI Table1) .....................2-717
2.9.14 E-DPDCH Puncturing Limit (10ms E-TTI, E-TFCI Table0) ......................2-722
XVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.9.15 E-DPDCH Puncturing Limit (10ms E-TTI, E-TFCI Table1) ......................2-723

2.9.16 E-DPDCH Puncturing Limit (2ms E-TTI, E-TFCI Table0) ........................2-725
2.10 E-DCH in CELL_DCH State Profile(UEdchRcDchProfile) .................................2-728
2.10.1 E-DCH in CELL_DCH State Profile Object ID ........................................2-728
2.10.2 E-DCH in CELL_DCH State Profile ID...................................................2-729
2.11 E-DCH in CELL_DCH State Configuration(UEdchRcDch) ................................2-731
2.11.1 E-DCH in CELL_DCH State Configuration Object ID..............................2-731
2.11.4 E-DPDCH Puncturing Limit (10ms E-TTI, E-TFCI Table0).......................2-735
2.11.5 E-DPDCH Puncturing Limit (10ms E-TTI, E-TFCI Table1).......................2-737
2.11.8 Number of Reference E-TFCI (2ms E-TTI, E-TFCI Table0) .....................2-741
2.11.10 Power Offset of Reference E-TFCIs (2ms E-TTI, E-TFCI Table0) ..........2-745
2.11.11 Number of Reference E-TFCI (2ms E-TTI, E-TFCI Table1) ...................2-746
2.11.12 Set of Reference E-TFCIs (2ms E-TTI, E-TFCI Table1) ........................2-748
2.11.14 Number of Reference E-TFCI (10ms E-TTI, E-TFCI Table0) .................2-751
2.11.15 Set of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0) ......................2-753
2.11.16 Power Offset of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0) ........2-755
2.11.17 Number of Reference E-TFCI (10ms E-TTI, E-TFCI Table1) .................2-756
2.11.18 Set of Reference E-TFCIs (10ms E-TTI, E-TFCI Table1) ......................2-758
2.11.19 Power Offset of Reference E-TFCIs (10ms E-TTI, E-TFCI Table1) ........2-760
2.11.26 E-TFCIboost for 2ms E-TTI Table2......................................................2-771
2.11.28 Number of Reference E-TFCI (2ms E-TTI, E-TFCI Table0, QPSK
Interpolation) .......................................................................................2-774
2.11.29 Set of Reference E-TFCIs (2ms E-TTI, E-TFCI Table0, QPSK
Interpolation) .......................................................................................2-776
XVIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.11.30 Power Offset of Reference E-TFCIs (2ms E-TTI, E-TFCI Table0, QPSK
Interpolation) .......................................................................................2-778
Interpolation) .......................................................................................2-779
Interpolation) .......................................................................................2-781
Interpolation) .......................................................................................2-783
Interpolation) .......................................................................................2-784
Interpolation) .......................................................................................2-786
2.11.36 Power Offset of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0,
QPSK Interpolation) .............................................................................2-788
Interpolation) .......................................................................................2-789
Interpolation) .......................................................................................2-791
2.11.39 Power Offset of Reference E-TFCIs (10ms E-TTI, E-TFCI Table1,
QPSK Interpolation) .............................................................................2-793
Boosting).............................................................................................2-797
Boosting).............................................................................................2-799
Boosting).............................................................................................2-801
Boosting).............................................................................................2-803
Boosting).............................................................................................2-804
Boosting).............................................................................................2-806
2.11.48 Power Offset of Reference E-TFCIs for Macro-Micro Soft Handover
(2ms E-TTI,E-TFCI Table2)...................................................................2-808
(10ms E-TTI,E-TFCI Table0)................................................................. 2-811
XIX
SJ-20141209142030-013|2015-11-12 (R1.3)

(10ms E-TTI,E-TFCI Table1).................................................................2-813
(2ms E-TTI,E-TFCI Table0,QPSK Interpolation) .....................................2-818
(2ms E-TTI,E-TFCI Table0,QPSK Interpolation) .....................................2-819
(10ms E-TTI,E-TFCI Table0,QPSK Interpolation) ...................................2-821
(10ms E-TTI,E-TFCI Table1,QPSK Interpolation) ...................................2-822
(2ms E-TTI,E-TFCI Table0,QPSK Boosting)...........................................2-824
(2ms E-TTI,E-TFCI Table1,QPSK Boosting)...........................................2-826
2.12 Location Area Configuration (ULocationArea)..................................................2-828
2.12.1 Location Area Configuration Object ID ..................................................2-828
2.12.2 Location Area Code.............................................................................2-829
2.13 Routing Area Configuration (URoutingArea) ....................................................2-830
2.13.1 Routing Area Configuration Object ID ...................................................2-830
2.13.2 Routing Area Code ..............................................................................2-832
2.14 Service Area Configuration in CS+PS Domain(UServiceArea)..........................2-833
2.14.1 Service Area Configuration in CS+PS Domain Object ID........................2-833
2.14.2 Service Area Code ..............................................................................2-834
2.15 Service Area Configuration in BC Domain(UServiceAreaBc) ............................2-836
2.15.1 Service Area Configuration in BC Domain Object ID ..............................2-836
2.15.2 Service Area Code for BC Domain........................................................2-837
2.16 Logic RNC Configuration(ULogicalRnc) ..........................................................2-838
2.16.1 Logic RNC Configuration Object ID.......................................................2-838
2.16.2 AMR Rate Adjustment Switch for RNC..................................................2-840
2.16.3 Switch for QoS Negotiation/Renegotiation.............................................2-841
2.16.4 MR Function Switch.............................................................................2-842
2.16.5 Integrity Protection Algorithm (UIA1) .....................................................2-844
2.16.6 Integrity Protection Algorithm (UIA2) .....................................................2-845
2.16.7 Encryption Algorithm (UEA0)................................................................2-846
XX
SJ-20141209142030-013|2015-11-12 (R1.3)

2.16.10 AMR_NB 4.75k Use Tag ....................................................................2-850
2.16.11 AMR_NB 5.15k Use Tag.....................................................................2-852
2.16.12 AMR_NB 5.90k Use Tag ....................................................................2-853
2.16.13 AMR_NB 6.70k Use Tag ....................................................................2-854
2.16.14 AMR_NB 7.40k Use Tag ....................................................................2-856
2.16.15 AMR_NB 7.95k Use Tag ....................................................................2-857
2.16.16 AMR_NB 10.2k Use Tag ....................................................................2-858
2.16.17 AMR_NB 12.2k Use Tag ....................................................................2-860
2.16.18 AMR_WB 6.60k Use Tag....................................................................2-861
2.16.19 AMR_WB 8.85k Use Tag....................................................................2-862
2.16.20 AMR_WB 12.65k Use Tag..................................................................2-864
2.16.21 AMR_WB 14.25k Use Tag..................................................................2-865
2.16.22 AMR_WB 15.85k Use Tag..................................................................2-866
2.16.23 AMR_WB 18.25k Use Tag..................................................................2-867
2.16.24 AMR_WB 19.85k Use Tag..................................................................2-869
2.16.25 AMR_WB 23.05k Use Tag..................................................................2-870
2.16.26 AMR_WB 23.85k Use Tag..................................................................2-871
2.16.27 Tnnsf ................................................................................................2-872
2.16.28 Lower Limit of GBR for Uplink Services Used for QoS
Negotiation/Renegotiation ....................................................................2-874
2.16.29 Lower Limit of GBR for Downlink Services Used for QoS
Negotiation/Renegotiation ....................................................................2-875
2.16.30 Negotiated GBR Level Number Shared by Uplink and Downlink ...........2-876
2.16.31 CDT Function Switch .........................................................................2-878
2.16.32 CDT-IMEI Acquisition Switch ..............................................................2-879
2.16.33 Switch for RL Reference Time Adjust During Diversity Mode ................2-880
2.16.34 Handover to GSM Penalty Timer ........................................................2-882
2.16.35 Compressed Mode Configuration Strategy ..........................................2-883
2.16.36 RNC Switch for PS Handover with LTE ...............................................2-885
2.16.37 RNC SRVCC Switch ..........................................................................2-886
2.16.38 Narrow-Band AMR Initial Data Rate for High Cell Load or Bad
Coverage Area Users...........................................................................2-888
2.16.39 Wide-Band AMR Initial Data Rate for High Cell Load or Bad Coverage
Area Users ..........................................................................................2-889
2.16.40 Special Network Resource Identifier in CS Domain ..............................2-891
2.16.41 Special Network Resource Identifier in PS Domain ..............................2-892
2.16.42 THP Segment Threshold....................................................................2-894
XXI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.43 Uplink Rate Adjustment Level Number ................................................2-895

2.16.44 Uplink Rate Adjustment Level.............................................................2-897
2.16.45 Downlink Rate Adjustment Level Number............................................2-898
2.16.46 Downlink Rate Adjustment Level ........................................................2-899
2.16.47 Used Dynamic Radio Bearer Control Information Profile.......................2-901
2.16.48 Switch of CS voice over HSPA ...........................................................2-902
2.16.49 DRBC Method Switch ........................................................................2-903
2.16.50 Switch of E-TTI Switching Triggered by User Plane Throughput
Measurement ......................................................................................2-905
2.16.51 Switch for DL DCH Rate Adjustment Based on D-TCP.........................2-906
2.16.52 Switch for UL DCH Rate Adjustment Based on UE Transmission
Power .................................................................................................2-908
2.16.53 Downlink Maximum Rate Threshold of I/B Service on CELL_FACH ......2-909
2.16.54 Uplink Maximum Rate Threshold of I/B Service on RACH ................... 2-911
2.16.55 Switch for DCH Rate Adjustment Based on Traffic Volume
Measurement ......................................................................................2-912
2.16.56 HS/D->D/D or HS/E->D/D Based on Quality Measurement Switch for
I/B Traffic.............................................................................................2-914
2.16.57 HS/D->D/D or HS/E->D/D Based on Quality Measurement Switch for
S Traffic...............................................................................................2-915
2.16.58 C Traffic Rate Threshold Used for Determining NRT PS Rate Upper
Limit....................................................................................................2-917
2.16.59 NRT PS Traffic Uplink Rate Upper Limit When Low Rate C Traffic+ PS
Traffic..................................................................................................2-918
2.16.60 NRT PS Traffic Downlink Rate Upper Limit When Low Rate C Traffic+
PS Traffic ............................................................................................2-920
2.16.61 NRT PS Traffic Uplink Rate Upper Limit When High Rate C Traffic+
PS Traffic ............................................................................................2-922
2.16.62 NRT PS Traffic Downlink Rate Upper Limit When High Rate C Traffic+
PS Traffic ............................................................................................2-923
2.16.63 Switch of supporting SRB on E-DCH...................................................2-925
2.16.64 Quality Measurement Switch for VoIP/ CS Voice..................................2-926
2.16.65 Initial Rate of UL DCH........................................................................2-928
2.16.66 Initial Rate of DL DCH........................................................................2-929
2.16.67 Switch of 6.8kbps Signalling Using on DCH.........................................2-930
2.16.68
Switch of PS Service Channel Allocation for Concurrent CS+PS
...........................................................................................................2-932
XXII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.69 Online-already Service Reconfiguration Method for UE of Release 6

and after Release 6 When Multi-RAB ....................................................2-933
2.16.70 Switch of Dynamic Radio Bearer Control Based on DPI .......................2-935
2.16.71 Switch of DPI Based QoS Algorithm ...................................................2-936
2.16.72
Indicator for Whether to Release Qchat UE's Non-Qchat-RB2 PS service
When There is no Traffic Volume
...........................................................................................................2-938
2.16.73 Event 4B0 Counter Threshold for the Release of Qchat UE's
Non-Qchat-RB2 PS Service, Shared by Uplink and Downlink..................2-939
2.16.74 NACC Support Indicator.....................................................................2-940
2.16.75 PS Inter-System Handover Indicator ...................................................2-942
2.16.76 Inter-System DTM Support Indicator ...................................................2-943
2.16.77 WB-AMR Speech Support Indicator ....................................................2-944
2.16.78 PS Conversational RAB for VoIP Support Indicator ..............................2-946
2.16.79 PS Signalling RAB for IMS Support Indicator.......................................2-947
2.16.80 Service-Based Handover Support Indicator .........................................2-948
2.16.81 HSDPA HS-DPCCH ACK/NACK enhancement Support Indicator .........2-949
2.16.82 Neighbouring Cell Monitoring Support Indicator ...................................2-951
2.16.83 Four E-DPDCHs Allowed Indicator .....................................................2-952
2.16.84 Cell ID Positioning Support Indicator ...................................................2-954
2.16.85 AGPS Support Indicator .....................................................................2-955
2.16.86 Handover Based on IMSI Support Indicator .........................................2-956
2.16.87 MBMS PTP over HSDPA Support Indicator .........................................2-958
2.16.88 Inter System Handover with Consideration of Gsm Load Support
Indicator ..............................................................................................2-959
2.16.89 Fast Reconfiguration Support Indication ..............................................2-961
2.16.90 AMR Inter Frequency Handover Switch...............................................2-962
2.16.91 AMR Inter Rat Handover Switch .........................................................2-964
2.16.92 R99 RT Inter Frequency Handover Switch...........................................2-965
2.16.93 R99 NRT Inter Frequency Handover Switch ........................................2-966
2.16.94 R99 RT Inter Rat Handover Switch .....................................................2-967
2.16.95 R99 NRT Inter Rat Handover Switch...................................................2-969
2.16.96 HSDPA Inter Frequency Handover Switch...........................................2-970
2.16.97 HSDPA Inter Rat Handover Switch .....................................................2-971
2.16.98 HSUPA Inter Frequency Handover Switch...........................................2-973
2.16.99 HSUPA Inter Rat Handover Switch .....................................................2-974
2.16.100 R99 RT Inter Rat (EUTRAN) Handover Switch ..................................2-975
XXIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.101 R99 NRT Inter Rat (EUTRAN) Handover Switch ................................2-977

2.16.102 HSDPA Inter Rat (EUTRAN) Handover Switch...................................2-978
2.16.103 HSUPA Inter Rat (EUTRAN) Handover Switch...................................2-979
2.16.104 Dynamic Update PO2 Switch............................................................2-981
2.16.105 CS 64K RB Mode Switch..................................................................2-982
2.16.106 Dedicated Priority Switch..................................................................2-984
2.16.107 CDT-NAS Call Number Acquisition Switch.........................................2-985
2.16.108 CDT-NodeB Statistic Info Acquisition Switch......................................2-986
2.16.109 CDT-Last Signalling Acquisition Switch .............................................2-988
2.16.110 CDT-NAS Messages Acquisition Switch ............................................2-989
2.16.111 CDT-RAB Rate Acquisition Switch.....................................................2-990
2.16.112 Handover to E-UTRAN Penalty Timer................................................2-992
2.16.113 Switch of whether to Punish the UE that can't Camp on PCH state ......2-993
2.16.114 Switch of Whether to transfer from HS-DSCH to DCH for R5 UE's
"PS Setup before CS" Concurrent Service .............................................2-994
2.16.115 CDT Record Number Threshold Per RRC Connection........................2-996
2.16.116 Switch of the Smart Channel Switch Judgment of CELL_DCH to
CELL_FACH........................................................................................2-997
2.16.117 Time Threshold that Ue is on CELL_FACH/PCH, used for the Smart
Channel Switch Judgment of CELL_DCH to CELL_FACH ......................2-999
2.16.118 Counter Threshold for the Time Ue is on CELL_FACH/PCH exceeds
the Threshold FachPchTimeThr, Used for the Smart Channel Switch
Judgment of CELL_DCH to CELL_FACH ............................................2-1000
2.16.119 Switch of the Smart Channel Switch Judgment of URA/CELL_PCH to
CELL_DCH .......................................................................................2-1002
2.16.120 Throughput Threshold for the Smart Channel Switch Judgment of
URA/CELL_PCH to CELL_DCH..........................................................2-1003
2.16.121 Counter Threshold for the Ue Throughput doesn't Exceed the
Threshold ThroughputThr, Used for the Smart Channel Switch
Judgment of URA/CELL_PCH to CELL_DCH ......................................2-1005
2.16.122 Switch of E-TTI Switching Triggered by UE Transmit Power
Measurement ....................................................................................2-1006
2.16.123 Switch of E-TTI Switching Whether Consider UE Channel Quality
and Cell Load ....................................................................................2-1008
2.16.124 Ec/No Threshold Used for E-TTI Switching......................................2-1009
2.16.125 Switch of the Channel Selection Strategy whether to be decided
by Traffic volume indicator IE of UE's Switching from PCH to Other
Channel ............................................................................................ 2-1011
2.16.126 RSCP Threshold Used for E-TTI Switching......................................2-1012
XXIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.127 Switch of HS-DSCH/E-DCH or HS-DSCH/DCH to DCH/DCH, Used

for CS+PS Scene...............................................................................2-1014
2.16.128 Event 4B0 Counter Threshold for HS-DSCH to DCH, Used for
CS+PS Scene ...................................................................................2-1015
2.16.129 The DCH Rate of PS Reconfigured, Used for CS+PS Scene ............2-1017
2.16.130 Switch of the PS Service Channel allocation, Used for UE in the
CELL_FACH/PCH State Triggering CS Call .........................................2-1018
2.16.131 Switch of D/D->HS/D or HS/E after HS/D or HS/E ->D/D ..................2-1020
2.16.132 RNC Switch for PS Redirection with LTE .........................................2-1021
2.16.133 Switch of Transition to 0/0kps When PS Service Has No Data ..........2-1023
2.16.134 Switch for Whether Forcing the PS Service to 0/0Kbps When UE is in
Bad Coverage Area for CS+PS Scene ................................................2-1024
2.16.135 Preference For A Certain Encryption Algorithm................................2-1026
2.16.136 Encryption Algorithm for Preference................................................2-1027
2.16.137 Dedicated priority RNC Switch........................................................2-1029
2.16.138 Switch of Prohibiting PS Service Carried on HS-DSCH/E-DCH for
Concurrent CS+PS ............................................................................2-1030
2.16.139 The Uplink DCH Rate of PS Reconfigured to DCH/DCH,Used for
CS+PS Scene ...................................................................................2-1031
2.16.140 The downlink DCH Rate of PS Reconfigured to DCH/DCH,Used for
CS+PS Scene ...................................................................................2-1033
2.16.141 Switch of PS service Channel Allocation for Concurrent CS+PS for
UE in CELL_DCH State......................................................................2-1034
2.16.142 The Uplink DCH Rate of PS Reconfigured to HS-DSCH/DCH,Used
for CS+PS Scene...............................................................................2-1036
2.16.143 The Low Rate Threshold of the PS Service, Used for CS+PS
Scene ...............................................................................................2-1037
2.16.144 RNC Switch for PS Handover from LTE to UTRAN...........................2-1039
2.16.145 CPICH EcNo Threshold Used for the Channel Type Decision when
Controlling the UE Transitioning from the PCH State ............................2-1040
2.16.146 CPICH RSCP Threshold Used for the Channel Type Decision when
Controlling the UE Transitioning from the PCH State ............................2-1042
2.16.147 RSCP Threshold Used for E-TTI Switching(Channel Transition
Scene) ..............................................................................................2-1044
2.16.148 Ec/No Threshold Used for E-TTI Switching (Channel Transition
Scene) ..............................................................................................2-1045
2.17 Qos Configuration Related to Logical Iur Link(ULogicalIurQos).......................2-1047
2.17.1 Logical Iur Link Configuration Object ID ..............................................2-1047
2.17.2 Used Iur Link.....................................................................................2-1048
2.17.3 Used Transport Bearer Type Profile Related to Basic Priority ...............2-1049
XXV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.17.4 Used Dedicated Service Transport Bearer Qos Profile .........................2-1050

2.18 QOS Function(UQosFunction)......................................................................2-1052
2.18.1 QoS Function Object ID .....................................................................2-1052
2.19 Qos Basic Configuration(UBasPri) ................................................................2-1053
2.19.1 QoS Basic Configuration Object ID .....................................................2-1053
2.19.2 Basic Priority.....................................................................................2-1054
2.19.3 Power Offset of the Maximum Downlink DPCH Showing Different Basic
Priority ..............................................................................................2-1056
2.19.4 Power Offset of the Maximum Uplink DPCH Showing Different Basic
Priority ..............................................................................................2-1057
2.19.5 Equivalent HSPA Users .....................................................................2-1059
2.19.6 DCH Uplink Nominal Bit Rate .............................................................2-1060
2.19.7 DCH Downlink Nominal Bit Rate.........................................................2-1062
2.19.8 HS-DSCH Downlink Nominal Bit Rate.................................................2-1063
2.19.9 E-DCH Uplink Nominal Bit Rate..........................................................2-1065
2.20 Basic Priority Mapping Relationship(UBasPriMapping)...................................2-1066
2.20.1 Basic Priority Mapping Relationship Object ID .....................................2-1066
2.20.2 ARP Priority Level .............................................................................2-1067
2.20.3 Traffic Class ......................................................................................2-1069
2.20.4 Basic Priority.....................................................................................2-1070
2.21 Scheduling Priority Mapping Relationship Profile(USchPriMappingProfile) ......2-1072
2.21.1 Scheduling Priority Mapping Relationship Profile Object ID ..................2-1072
2.21.2 Scheduling Priority Index ...................................................................2-1073
2.22 Scheduling Priority Mapping Relationship(USchPriMapping) ..........................2-1074
2.22.1 Scheduling Priority Mapping Relationship Object ID.............................2-1074
2.22.2 Basic Priority.....................................................................................2-1076
2.22.3 Radio Bearer Type ............................................................................2-1077
2.22.4 Scheduling Priority ............................................................................2-1079
2.23 Application Priority Mapping Relationship Profile(UAppPriMappingProfile) ......2-1081
2.23.1 Application Priority Mapping Relationship Profile Object ID ..................2-1081
2.23.2 Application Priority Index....................................................................2-1082
2.23.3 Application Priority Configuration Scene..............................................2-1083
2.24 Application Priority Mapping Relationship(UAppPriMapping) ..........................2-1085
2.24.1 Application Priority Mapping Relationship Object ID .............................2-1085
2.24.2 Basic Priority.....................................................................................2-1086
2.24.3 Radio Bearer Type ............................................................................2-1087
2.24.4 Service Direction Used in Application Priority Mapping.........................2-1088
2.24.5 Rate Class ........................................................................................2-1090
XXVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.24.6 Application Priority.............................................................................2-1091

2.25 Transport Bearer Type Profile Related to Basic Priority (UTbTypeProfile) ........2-1093
2.25.1 Transport Bearer Type Profile Related to Basic Priority Object ID .........2-1093
2.25.2 Profile ID of Transport Bearer Type Profile Related to Basic Priority ......2-1095
2.25.3 Transmission Mode ...........................................................................2-1096
2.26 Transport Bearer Type Related to Basic Priority (UTbType) ............................2-1097
2.26.1 Transport Bearer Type Related to Basic Priority Object ID....................2-1097
2.26.2 Basic Priority ....................................................................................2-1098
2.26.3 Radio Bearer Type ............................................................................ 2-1100
2.26.4 Transport Bearer Type ....................................................................... 2-1101
2.26.5 DSCP for IP ..................................................................................... 2-1102
2.26.6 Uplink Reserved Bandwidth for DCH I/B (or HSPA I/B) Traffic .............. 2-1104
2.26.7 Downlink Reserved Bandwidth for DCH I/B (or HSPA I/B) Traffic .......... 2-1105
2.27 Dedicated Service Transport Bearer Qos Profile(UDedSrvTbProfile)............... 2-1106
2.27.1 Dedicated Service Transport Bearer Qos Profile Object ID ................... 2-1106
2.27.2 Transport Qos Profile parameter Index................................................ 2-1107
2.27.3 Initial Transport Network Scene .......................................................... 2-1109
2.27.4 Dedicated Service Transport Bearer Qos Profile Template Type ........... 2-1110
2.28 Dedicated Service Transport Bearer Qos Configuration(UDedSrvTb).............. 2-1111
2.28.1 Dedicated Service Transport Bearer Qos Configuration Object ID......... 2-1111
2.28.2 Traffic Category................................................................................. 2-1113
2.28.3 Transport Bearer Type for IUR Interface.............................................. 2-1115
2.28.4 Transport Bearer Type 1 for IUB Interface ........................................... 2-1116
2.28.10 DSCP for IP ................................................................................... 2-1126
2.28.11 Uplink Reserved Bandwidth for I/B Traffic .......................................... 2-1127
2.28.12 Downlink Reserved Bandwidth for I/B Traffic ..................................... 2-1128
2.29 Access Control Profile Related to Basic Priority (UBPriAcProfile).................... 2-1130
2.29.1 Access Control Profile Related to Basic Priority Object ID .................... 2-1130
2.29.2 Basic Priority AC Index ...................................................................... 2-1131
2.29.3 Initial Load Scene.............................................................................. 2-1132
2.30 Access Control Related to Basic Priority(UBPriAc)......................................... 2-1134
2.30.1 Access Control Related to Basic Priority Object ID............................... 2-1134
XXVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.30.2 Basic Priority Used in Admission Control............................................. 2-1135

2.30.3 DCH Uplink AC Threshold.................................................................. 2-1136
2.30.4 DCH Downlink AC Threshold ............................................................. 2-1138
2.30.5 E-DCH AC Threshold ........................................................................ 2-1140
2.30.6 HSDPA AC Threshold........................................................................ 2-1141
2.30.7 MBMS AC Threshold ......................................................................... 2-1143
2.30.8 MBMS Load Threshold Reference for Counting................................... 2-1144
2.30.9 Code Tree Reserved Ratio................................................................. 2-1146
2.30.10 Uplink Admission Control Threshold Based on Equivalent AMR User
Number ............................................................................................. 2-1148
2.30.11 Uplink Admission Control Threshold Based on Equivalent AMR User
Number ............................................................................................. 2-1150
2.30.12 Uplink AC Threshold for Normal Equivalent AMR Users Load............. 2-1151
2.30.13 Uplink AC Threshold for High Equivalent AMR Users Load ................ 2-1153
2.31 User Authorized PLMN+SNAC Information(UImsiSnacFilter).......................... 2-1155
2.31.1 User Authorized PLMN+SNAC Information Object ID........................... 2-1155
2.31.2 The Imsi Matched Digits Num............................................................. 2-1156
2.31.3 The Imsi Matched Digit ...................................................................... 2-1157
2.31.4 Number of Shared Network Code ....................................................... 2-1159
2.31.5 MCC of Shared Network .................................................................... 2-1160
2.31.6 MNC of Shared Network .................................................................... 2-1161
2.31.7 Shared Network Area Code................................................................ 2-1162
2.31.8 Selected PLMN for CN....................................................................... 2-1164
2.32 Reserved User Configuration (URsvdUeImsiList)........................................... 2-1165
2.32.1 Reserved User Configuration ID ......................................................... 2-1165
2.32.2 IMSI Digits Number in Reserved User List for User Identification .......... 2-1166
2.32.3 IMSI High-bit Digits in Reserved User List for User Identification........... 2-1168
2.32.4 IMSI Active Indication for IMSI in Reserved User List........................... 2-1169
2.32.5 Basic Priority of CS Domain for User in Reserved User List.................. 2-1170
2.32.6 HSPA Scheduling Priority of CS Domain for User in Reserved User
List.................................................................................................... 2-1172
2.32.7 Congestion Scheduling Priority of CS Domain for User in Reserved
User List............................................................................................ 2-1173
2.32.8 Application Priority of CS Domain for User in Reserved User List ......... 2-1174
2.32.9 Basic Priority of PS Domain Service for User in Reserved User List...... 2-1176
2.32.10 HSPA Scheduling Priority of PS Domain Service for User in Reserved
User List............................................................................................ 2-1177
XXVIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.32.11 Congestion Scheduling Priority of PS Domain Service for User in

Reserved User List ............................................................................ 2-1178
2.32.12 Application Priority of PS Domain Service for User in Reserved User
List.................................................................................................... 2-1180
2.32.13 Timer of Relocation Delay for CS Service of Reserved User ............... 2-1181
2.32.14 Timer of Relocation Delay for PS Service of Reserved User ............... 2-1182
2.33 Diamond User Configuration(UDiamondUserImsiList) .................................... 2-1184
2.33.1 Diamond User Configuration ID .......................................................... 2-1184
2.33.2 IMSI Digits Number in Diamond User List for User Identification ........... 2-1185
2.33.3 IMSI High-bit Digits in Diamond User List for User Identification ........... 2-1186
2.33.4 IMSI Active Indication for IMSI in Diamond User List............................ 2-1188
2.33.5 Basic Priority of CS Domain Service for User in Diamond User List ...... 2-1189
2.33.6 HSPA Scheduling Priority of CS Domain Service for User in Diamond
User List............................................................................................ 2-1190
2.33.7 Congestion Scheduling Priority of CS Domain Service for User in
Diamond User List ............................................................................. 2-1192
2.33.8 Application Priority of CS Domain Service for User in Diamond User
List.................................................................................................... 2-1193
2.33.9 Basic Priority of PS Domain Service for User in Diamond User List....... 2-1194
2.33.10 HSPA Scheduling Priority of PS Domain Service for User in Diamond
User List............................................................................................ 2-1196
2.33.11 Congestion Scheduling Priority of PS Domain Service for User in
Diamond User List ............................................................................. 2-1197
2.33.12 Application Priority of PS Domain Service for User in Diamond User
List.................................................................................................... 2-1199
2.34 LAC and SNAC Information(USnac) .............................................................2-1200
2.34.1 LAC and SNAC Information Object ID.................................................2-1200
2.34.2 Shared Network Area Code................................................................2-1201
2.34.3 Used Location Area ...........................................................................2-1202
2.35 Golden/Silver/Bronze Category List of RRC
Establishment(URrcCategoryMapping) .........................................................2-1204
2.35.1 RRC Establishment Category Mapping Object ID ................................2-1204
2.35.2 RRC Establishment Cause.................................................................2-1205
2.35.3 Golden/Silver/Bronze Category of RRC Establishment.........................2-1207
2.35.4 Service Category Based on RRC Establishment Cause .......................2-1209
2.36 Basic Priority List of RRC Setup category(URrcCategoryBasPriMapping)........2-1210
2.36.1 RRC Establishment Category Basic Priority Mapping Object ID............2-1210
2.36.2 Golden/Silver/Bronze Category of RRC Establishment.........................2-1212
XXIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.36.3 Basic Priority for different Golden/Silver/Bronze Category of RRC

Establishment ....................................................................................2-1213
2.36.4 RRC Establishment Cause.................................................................2-1215
2.36.5 Service Category Based on RRC Establishment Cause .......................2-1217
2.37 Roaming Ue IMSI Configuration List (URoamingIMSI) ...................................2-1218
2.37.1 Roaming Ue IMSI Configuration List Object ID ....................................2-1218
2.37.2 IMSI Digits Number for roaming uesr identification...............................2-1219
2.37.3 IMSI High-bit Digits for roaming uesr identification ...............................2-1221
2.37.4 Used Local ManagedElement Plmn Information ..................................2-1222
2.38 UE Timers and Constants Information(UUeCnst) ...........................................2-1223
2.38.1 UE Timers and Constants Information Object ID..................................2-1223
2.38.2 Waiting Time After UE Sending RRC CONNECTION REQUEST
Message (T300).................................................................................2-1224
REQUEST Message (N300) ...............................................................2-1226
2.38.4 Waiting Time for Receiving "In Sync" from L1 in Idle Mode (T312 in Idle
Mode) ...............................................................................................2-1228
2.38.5 Maximum Number of "In Sync" Received from L1 in Idle Mode (N312 in
Idle Mode) .........................................................................................2-1229
2.38.6 Waiting Time After UE Sending CELL/URA UPDATE Message
(T302) ...............................................................................................2-1231
2.38.7 Maximum Number of Retransmissions of the CELL/URA UPDATE
Message (N302) ................................................................................2-1233
2.38.8 Waiting Time After UE Sending UE CAPABILITY INFORMATION
Message (T304).................................................................................2-1234
2.38.9 Maximum Number of Retransmissions of the UE CAPABILITY
INFORMATION Message (N304) ........................................................2-1236
2.38.10 Period of Cell/URA Update When UE is in
CELL_FACH/CELL_PCH/URA_PCH State (T305) ...............................2-1238
2.38.11 Waiting Time for Cell Reselection After UE is out of Service (T307) ......2-1239
2.38.12 Waiting Time After Sending RRC CONNECTION RELEASE
COMPLETE Message in CELL_DCH State (T308)...............................2-1241
2.38.13 Waiting Time After Requesting Connection Establishment in Other
System (eg. GSM) (T309) ..................................................................2-1243
2.38.14 Waiting Time for Receiving "In Sync" from L1 in Connected Mode
(T312 in Connected Mode) .................................................................2-1244
2.38.15 Maximum Number of "In Sync" Received from L1 in Connected Mode
(N312 in Connected Mode).................................................................2-1246
2.38.16 Waiting Time After DPCCH Established in CELL_DCH State Losing
Synchronization (T313) ......................................................................2-1247
XXX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.38.17 Maximum Number of Successive "Out of Sync" Received from L1

(N313)...............................................................................................2-1249
2.38.18 Waiting Time for Completion of Cell Update When Radio Link Fails
and Radio Bearer (s) Associated with T314 Exist (T314) ......................2-1251
2.38.19 Waiting Time for Completion of Cell Update When Radio Link Fails
and Radio Bearer (s) Associated with T315 Exist (T315) ......................2-1253
2.38.20 Maximum Number of Successive "In Sync" Received from L1 During
T313 is Activated (N315) ....................................................................2-1254
2.38.21 Waiting Time for Cell Selection/Reselection After UE is out of Service
in CELL_PCH/URA_PCH State (T316)................................................2-1256
2.38.22 Switch of T323 Broadcasting ............................................................2-1258
2.38.23 Waiting Time of UE Sending message SIGNALING CONNECTION
RELEASE INDICATION (with Cause)(T323) ........................................2-1259
REQUEST Message for High Cell Load...............................................2-1261
2.38.25 Waiting Time After UE Sending RRC CONNECTION REQUEST
Message for High Cell Load................................................................2-1262
2.39 CN NAS System Information(UCnInfo)..........................................................2-1264
2.39.1 CN NAS System Information Object ID ...............................................2-1264
2.39.2 CN Domain Supported.......................................................................2-1266
2.39.3 IMSI Attach and Detach Indicator .......................................................2-1267
2.39.4 Network Mode of Operation................................................................2-1268
2.39.5 Timer for Periodic Location Update (T3212) ........................................2-1270
2.39.6 CS Domain DRX Cycle Length Coefficient ..........................................2-1272
2.39.7 PS Domain DRX Cycle Length Coefficient ..........................................2-1273
2.39.8 Modification Period Coefficient for MBMS............................................2-1275
2.40 Iu Interface Timers and Constants Information(UIuCnst) ................................2-1277
2.40.1 Iu Interface Timers and Constants Information Object ID......................2-1277
2.40.2 SRNC Wait Time for Relocation Preparation .......................................2-1278
2.40.3 SRNC Overall Protective Time for Relocation ......................................2-1280
2.40.4 Delay Time for Relocation after direct retry..........................................2-1281
2.40.5 Start time to send the forwarded PDCP SDUs in the target RNC during
relocation of SRNS ............................................................................2-1283
2.40.6 Maximum Waiting Time for RESET in RNC .........................................2-1284
2.40.7 Timer Before Sending RESET Response to CN...................................2-1285
2.40.8 Timer for Sending RESOURCE RESET Response to CN.....................2-1287
2.40.9 Timer for RESOURCE RESET Response from CN ..............................2-1288
2.40.10 Timer for Ignoring all OVERLOAD Messages or Signalling Point
Congested Information (TigOR) ..........................................................2-1290
XXXI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.40.11 Timer for Not Allowing to Increase Traffic (TinTR) ..............................2-1291

2.40.12 Maximum Number of Retransmissions of the RESOURCE RESET
Message ...........................................................................................2-1293
2.40.13 Maximum Number of Retransmissions of the RESET Message ..........2-1294
2.41 Dynamic Radio Bearer Control Information Profile(UDrbcProfile) ....................2-1296
2.41.1 Dynamic Radio Bearer Control Information Profile Object ID ................2-1296
2.41.2 Drbc Strategy Configuration Index ......................................................2-1297
2.41.3 Drbc Strategy Name ..........................................................................2-1298
2.42 Dynamic Radio Bearer Control Information(UDrbc)........................................2-1299
2.42.1 Dynamic Radio Bearer Control Information Object ID...........................2-1299
2.42.2 Event 4B Counter Threshold for HSPA Using DTX/DRX or CELL_FACH
using DRX to PCH or IDLE Shared by Uplink and Downlink..................2-1301
2.42.3 Event 4A Counter Threshold for CELL_FACH to CELL_DCH Shared by
Uplink and Downlink...........................................................................2-1302
2.42.4 Event 4A Counter Threshold for Increasing Rate on DCH or
DCH->HSPA......................................................................................2-1304
2.42.5 Event 4B Counter Threshold for Decreasing Rate on DCH ...................2-1306
2.42.6 Event 4B Counter Threshold for CELL_DCH to PCH Shared by Uplink
and Downlink.....................................................................................2-1307
2.42.7 Event 4B Counter Threshold for CELL_FACH without DRX to PCH
Shared by Uplink and Downlink...........................................................2-1309
2.42.8 Event 4B Counter Threshold for CELL_DCH to Idle Shared by Uplink
and Downlink..................................................................................... 2-1311
2.42.9 Event 4B Counter Threshold for CELL_FACH without DRX to Idle
Shared by Uplink and Downlink...........................................................2-1312
2.42.10 Time Threshold for CELL_PCH or URA_PCH to Idle..........................2-1314
2.42.11 Event 4B Counter Threshold for Cell_Dch to Cell_FACH ....................2-1316
2.42.12 Event 4A Counter Threshold for E-TTI Switching from 10ms to
2ms...................................................................................................2-1317
2.42.13 Event 4B Counter Threshold for E-TTI Switching from 2ms to
10ms.................................................................................................2-1319
2.42.14 Event A Counter Threshold for PS on DL DCH or DL AMR Decreasing
Rate Based on D-TCP........................................................................2-1320
2.42.15 Event B Counter Threshold for Restriction PS Increasing Rate on DL
DCH or Triggering DL AMR Increasing Rate Based on D-TCP ..............2-1322
2.42.16 Switch of Transferring to CELL_FACH ..............................................2-1324
2.42.17 Switch of URA_PCH/CELL_PCH Support .........................................2-1325
2.42.18 Increment Times of Event 4B0 for UE Which is not sensitive for Battery
Consumption Transferred to URA_PCH/CELL_PCH or Idle state ..........2-1327
XXXII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.42.19 Event 4B Counter Threshold for Cell_Dch to Cell_FACH for UE Using

Dtx/Drx..............................................................................................2-1329
2.42.20 Event 4B0 Counter Threshold for the Smart Channel Switch Judgment
of CELL_DCH to CELL_FACH ............................................................2-1330
DCH->HSPA for High Cell Load ..........................................................2-1332
2.42.22 Event 4B Counter Threshold for Decreasing Rate on DCH for High
Cell Load...........................................................................................2-1333
2.42.23 Event 4A Counter Threshold for CELL_FACH to CELL_DCH Shared
by Uplink and Downlink for High Cell Load...........................................2-1335
2.42.24 Event 4B Counter Threshold for Cell_Dch to Cell_FACH for High Cell
Load .................................................................................................2-1336
2.42.25 Whether the State Transition Due to Reduced Traffic Volume is
Triggered by Event 4B of Either Direction ............................................2-1338
2.42.26 Event 4B Counter Threshold for CELL_DCH to PCH Shared by Uplink
and Downlink.....................................................................................2-1340
2.43 Global Access Control Information(UGloAc) ..................................................2-1342
2.43.1 Global Access Control Information Object ID .......................................2-1342
2.43.2 True Queue Length ...........................................................................2-1343
2.43.3 Time of True Queue for Congested Service in RAB Setup Process .......2-1344
2.43.4 Time of True Queue for Congested Service Relocating into UTRAN ......2-1346
2.43.5 Maximum Time in the True Queue when Service be Forced into
Queue...............................................................................................2-1347
2.43.6 Switch of AMR Traffic Re-admission after AMR Rate Decrease ............2-1349
2.43.7 Forced Queue Switch for AMR Service ...............................................2-1350
2.43.8 Forced Queue Switch for CS 64kbps service.......................................2-1352
2.44 Hspa Configuration(UHspa) .........................................................................2-1354
2.44.1 Hspa Configuration Object ID .............................................................2-1354
2.44.2 RNC F-DPCH Support Indicator .........................................................2-1355
2.44.3 RNC Enhanced F-DPCH Support Indicator ........................................2-1356
2.44.4 RNC MIMO and DL64QAM Combined Capability Support Indicator ......2-1357
2.44.5 DPCH Code Re-Assign Support Indicator ...........................................2-1359
2.44.6 DPCH Code Re-Assign Period ...........................................................2-1360
2.44.7 DTX/DRX Switch ...............................................................................2-1361
2.44.8 DTX Switch for Speech......................................................................2-1362
2.44.9 DTX Switch for NRT ..........................................................................2-1364
2.44.10 DRX Switch for Speech....................................................................2-1365
2.44.11 DRX Switch for NRT ........................................................................2-1366
2.44.12 HS-SCCH Less Switch.....................................................................2-1368
XXXIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.13 HS-SCCH Less Switch for Non-VoIP/AMR ........................................2-1369

2.44.14 RNC Downlink Enhanced Layer 2 Support Indicator ..........................2-1370
2.44.15 RNC Uplink Enhanced Layer 2 Support Indicator...............................2-1372
2.44.16 RNC 64QAM Support Indicator.........................................................2-1373
2.44.17 RNC MIMO Support Indicator ...........................................................2-1374
2.44.18 Switch for Limiting HSDPA GBR Resource Consumption ...................2-1375
2.44.19 Support Type of Downlink RLC Flexible PDU Size Format .................2-1377
2.44.20 Support Type of Uplink RLC Flexible PDU Size Format......................2-1378
2.44.21 RNC DC+MIMO Support Indicator ....................................................2-1380
2.44.22 Dual-band or Single-Band Dual-Cell HS-DSCH Support Indication ......2-1382
2.44.23 Power Offset Relative to E-HICH in Single Link Condition for E-HICH
of Serving RLS in Macro Diversity Condition (2ms TTI).........................2-1383
of Serving RLS in Macro Diversity Condition (10ms TTI).......................2-1385
of Non-serving RLS in Macro Diversity Condition (2ms TTI) ..................2-1386
of Non-serving RLS in Macro Diversity Condition (10ms TTI) ................2-1388
2.44.27 Power Offset Relative to E-RGCH in Single Link Condition for E-RGCH
of Serving RLS in Macro Diversity Condition (2ms TTI).........................2-1389
2.44.28 Power Offset Relative to E-RGCH in Single Link Condition for E-RGCH
of Serving RLS in Macro Diversity Condition (10ms TTI).......................2-1391
2.44.29 Power Offset Relative to 10ms TTI E-RGCH in Single Link Condition
for E-RGCH of Non-serving RLS in Macro Diversity Condition ..............2-1392
2.44.30 Dynamic Updating Switch of E-AGCH Power Offset...........................2-1394
2.44.31 HSUPA Control Channel (E-AGCH, E-RGCH/E-HICH) Number Update
Period ...............................................................................................2-1395
2.44.32 Indicator for Whether to Judge Event 1F Condition When the Service
is Setup on HSPA ..............................................................................2-1397
2.44.33 Quantified E-DPCCH/DPCCH Power Offset (10ms TTI) .....................2-1399
2.44.34 Quantified E-DPCCH/DPCCH Power Offset (2ms TTI).......................2-1400
2.44.35 Power Offset for Scheduling Info (2ms TTI) .......................................2-1402
2.44.36 Power Offset for Scheduling Info (10ms TTI) .....................................2-1403
2.44.37 HS-DPCCH ACK Power Offset for Single Radio Link or Intra-NodeB
Handover ..........................................................................................2-1405
2.44.38 ACK-NACK Repetition Factor ...........................................................2-1406
2.44.39 HS-DPCCH NACK Power Offset for Single Radio Link or Intra-NodeB
Handover ..........................................................................................2-1408
2.44.40 CQI Feedback Cycle........................................................................2-1409
XXXIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.41 HS-DPCCH CQI Power Offset for Single Radio Link or Intra-NodeB
Handover .......................................................................................... 2-1411
2.44.42 CQI Repetition Factor ......................................................................2-1413
2.44.43 E-DCH Reference Power Offset .......................................................2-1414
2.44.44 TPC Command Error Rate Target .....................................................2-1416
2.44.45 HSDPA Associate CM Method..........................................................2-1417
2.44.46 HSUPA Associate CM Method..........................................................2-1419
2.44.47 HS-DPCCH ACK Power Offset for Inter-NodeB Handover..................2-1420
2.44.48 HS-DPCCH CQI Power Offset for Inter-NodeB Handover...................2-1422
2.44.49 HS-DPCCH NACK Power Offset for Inter-NodeB Handover ...............2-1423
2.44.50 Timer for Event 1D in HSPA or MBMS ..............................................2-1425
2.44.51 Code Update Period Unit to update the HS-PDSCH number based on
code occupation ratio .........................................................................2-1426
2.44.52 Period 1 (millisecond) to update the HS-PDSCH number based on
code occupation ratio .........................................................................2-1428
2.44.53 Period 2 (second) to update the HS-PDSCH number based on code
occupation ratio .................................................................................2-1429
2.44.54 HSPA Total Downlink Power Allocation Method .................................2-1430
2.44.55 Maximum Bit Rate of HSDPA Across Iur Interface .............................2-1432
2.44.56 HS-DPCCH ACK Power Offset for Macro-Micro Handover .................2-1433
2.44.57 HS-DPCCH NACK Power Offset for Macro-Micro Handover ...............2-1435
2.44.58 HS-DPCCH CQI Power Offset for Macro-Micro Handover ..................2-1436
2.44.59 Range of DPCH/F-DPCH timing .......................................................2-1438
2.44.60 RNC DB-DC+MIMO Support Indicator ..............................................2-1439
2.44.61 RNC DB-MC+MIMO Support Indicator ..............................................2-1440
2.44.62 RNC SB-MC+MIMO Support Indicator ..............................................2-1442
2.44.63 RNC HSDPA Vs R99 Code Priority Indicator .....................................2-1443
2.44.64 Switch Used to control DL DPCH Timing Adjustment .........................2-1445
2.45 Common EDCH Configuration(UCommEdch)................................................2-1447
2.45.1 Common EDCH Configuration Object ID.............................................2-1447
2.45.2 Quantified E-DPCCH/DPCCH Power Offset (10ms TTI).......................2-1448
2.45.3 Quantified E-DPCCH/DPCCH Power Offset (2ms TTI).........................2-1449
2.45.4 Power Offset for Scheduling Info (2ms TTI) .........................................2-1451
2.45.5 Power Offset for Scheduling Info (10ms TTI) .......................................2-1452
2.45.6 HS-DPCCH ACK Power Offset for Common E-DCH Transmission .......2-1454
2.45.7 ACK-NACK Repetition Factor.............................................................2-1455
2.45.8 HS-DPCCH NACK Power Offset for Common E-DCH Transmission ......2-1457
2.45.9 CQI Feedback Cycle..........................................................................2-1458
XXXV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.45.10 HS-DPCCH CQI Power Offset for Common E-DCH Transmission ......2-1460
2.45.11 CQI Repetition Factor ......................................................................2-1461
2.45.12 E-DCH Reference Power Offset .......................................................2-1463
2.45.13 TPC Command Error Rate Target .....................................................2-1464
2.45.14 Common E-DCH MAC-d Flow Multiplexing Switch .............................2-1466
2.45.15 Common E-DCH Transmission Time Interval.....................................2-1467
2.45.16 Logical Channel Type Indication for Common E-DCH MAC-d Flow ......2-1468
2.45.17 HARQ Power Offset for Common E-DCH MAC-d Flow (2ms TTI) .......2-1470
2.45.18 HARQ Power Offset for Common E-DCH MAC-d Flow (10ms TTI) ......2-1471
2.45.19 Maximum Number of Retransmissions for Common E-DCH MAC-d
Flow (2ms TTI) ..................................................................................2-1473
2.45.20 Maximum Number of Retransmissions for Common E-DCH MAC-d
Flow (10ms TTI).................................................................................2-1474
2.45.21 Common E-DCH Maximum Uplink RLC PDU Size .............................2-1476
2.45.22 Common E-DCH Minimum Uplink RLC PDU Size..............................2-1477
2.45.23 Common E-DCH Maximum Uplink MAC-C PDU Size for Fixed
PDU..................................................................................................2-1478
2.45.24 Spreading Factor Supported by Uplink Enhanced CELL_FACH ..........2-1480
2.45.25 Happy Bit Delay for Common E-DCH................................................2-1481
2.46 Limiting HSDPA GBR Resource Consumption
Profile(UGbrResLimitProfile) ........................................................................2-1483
2.46.1 Limiting HSDPA GBR Resource Consumption Profile Object ID............2-1483
2.46.2 Limiting HSDPA GBR Resource Consumption Profile ID ......................2-1484
Configuration(UGbrResLimit) .......................................................................2-1485
2.47.1 Limiting HSDPA GBR Resource Consumption Configuration Object
ID .....................................................................................................2-1485
2.47.2 Guaranteed Bit Rate Level Number of HSDPA Services for Limiting
HSDPA GBR Resource Consumption..................................................2-1487
2.47.3 Guaranteed Bit Rate Levels of HSDPA Services for Limiting HSDPA
GBR Resource Consumption ..............................................................2-1488
2.47.4 UE HS-DSCH Required Power Upper Limit for Limiting HSDPA GBR
Resource Consumption ......................................................................2-1490
2.48 MBMS Configuration(UMbms)......................................................................2-1492
2.48.1 MBMS Configuration Object ID...........................................................2-1492
2.48.2 S Traffic on PTP or PTM Switch ........................................................2-1493
2.48.3 B Traffic on PTP or PTM Switch ........................................................2-1494
2.48.4 The Minimum Rate Threshold of the SCCPCH Setup for MBMS ..........2-1496
2.48.5 MSCH Supported Switch ...................................................................2-1498
XXXVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.48.6 S Traffic Frequency Converge Switch ................................................2-1499

2.48.7 B Traffic Frequency Converge Switch ................................................2-1501
2.48.8 SCCPCH Power Offset for Soft Combining .........................................2-1502
2.48.9 SCCPCH Power Offset for Selective Combining .................................2-1504
2.48.10 Threshold for Cell in Half-island Status .............................................2-1505
2.48.11 Threshold for Cell in Island Status ....................................................2-1507
2.48.12 Downlink Switch for Dropping MBMS Services .................................2-1508
2.48.13 Counting Scope for URA_PCH ........................................................2-1510
2.48.14 Counting Scope for Cell_PCH ......................................................... 2-1511
2.48.15 Counting Scope for Cell_FACH ........................................................2-1513
2.48.16 UE Number Threshold for PTP and PTM Switch ...............................2-1514
2.48.17 Waiting Time for RRC CONNECTION SETUP Message When MBMS
is Used (T318) ..................................................................................2-1516
2.48.18 MBMS Iub Transport Bearer Multiplex Switch ...................................2-1518
2.49 UE DTX/DRX Profile(UDtxDrxProfile) ...........................................................2-1519
2.49.1 UE DTX/DRX Profile Object ID ...........................................................2-1519
2.49.2 UE DTX/DRX Configuration Index ......................................................2-1520
2.50 UE DTX/DRX Configuration(UDtxDrx)...........................................................2-1521
2.50.1 UE DTX/DRX Configuration Object ID.................................................2-1521
2.50.2 UE DTX Cycle 1 for 2ms TTI ..............................................................2-1523
2.50.3 UE DTX Cycle 1 for 10ms TTI ............................................................2-1524
2.50.4 UE DTX Cycle 2 for 2ms TTI ..............................................................2-1526
2.50.5 UE DTX Cycle 2 for 10ms TTI ............................................................2-1528
2.50.6 MAC DTX Cycle for 2ms TTI ..............................................................2-1529
2.50.7 MAC DTX Cycle for 10ms TTI ............................................................2-1531
2.50.8 Inactivity Threshold for UE DTX Cycle 2 for 2ms TTI............................2-1532
2.50.9 Inactivity Threshold for UE DTX Cycle 2 for 10ms TTI..........................2-1534
2.50.10 UE DTX Long Preamble Length........................................................2-1535
2.50.11 CQI DTX Timer................................................................................2-1537
2.50.12 Inactivity Threshold for UE DRX Cycle ..............................................2-1539
2.50.13 UE DRX Grant Monitoring ................................................................2-1540
2.50.14 UE DRX Cycle for 10ms TTI.............................................................2-1542
2.50.15 UE DRX Cycle for 2ms TTI...............................................................2-1543
2.50.16 Inactivity Threshold for UE Grant Monitoring for 2ms TTIs ..................2-1545
2.50.17 Inactivity Threshold for UE Grant Monitoring for 10ms TTIs ................2-1547
2.50.18 MAC Inactivity Threshold for 2ms TTIs..............................................2-1548
2.50.19 MAC Inactivity Threshold for 10ms TTIs ............................................2-1550
2.50.20 UE DPCCH Burst_1 for 10ms TTI.....................................................2-1552
XXXVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.50.21 UE DPCCH Burst_1 for 2ms TTI.......................................................2-1553

2.50.22 UE DPCCH Burst_2 for 10ms TTI.....................................................2-1555
2.50.23 UE DPCCH Burst_2 for 2ms TTI.......................................................2-1557
2.50.24 The HSPA Evolution Function Indication When CPC is Activated........2-1558
2.50.25 CQI Feedback Cycle When CPC is Activated and Uplink 2ms TTI ......2-1560
2.50.26 CQI Repetition Factor When CPC is Activated and Uplink 2ms TTI ......2-1562
2.50.27 CQI Feedback Cycle When CPC is Activated and Uplink 10ms TTI ......2-1564
2.50.28 CQI Repetition Factor When CPC is Activated and Uplink 10ms
TTI....................................................................................................2-1567
2.51 Power Control Profile Related to Service(USrvPcProfile)................................2-1569
2.51.1 Power Control Profile Related to Service Object ID..............................2-1569
2.51.2 Service Related Power Control Profile ID ............................................2-1570
2.51.3 Initial Load Scene..............................................................................2-1572
2.52 Power Control Related to Service(USrvPc) ...................................................2-1574
2.52.1 Power Control Related to Service Object ID ........................................2-1574
2.52.2 Sub-service Type...............................................................................2-1576
2.52.3 Uplink Inner Loop Power Control Algorithm .........................................2-1577
2.52.4 Step Size of Uplink Inner Loop Power Control .....................................2-1579
2.52.5 Uplink SIR Target Up Step Size ..........................................................2-1580
2.52.6 Uplink SIR Target Down Step Size......................................................2-1582
2.52.7 Uplink SIR Target Maximum Down Step Size ......................................2-1584
2.52.8 Uplink SIR Target Maximum Up Step Size...........................................2-1586
2.52.9 Step Size of Downlink Inner Loop Power Control .................................2-1588
2.52.10 BLER Target....................................................................................2-1590
2.52.11 Error Transport Block Number Threshold...........................................2-1592
2.52.12 Tolerance BLER Period....................................................................2-1593
2.52.13 Threshold of HARQ Failure Indication Number to Adjust SIR Target
Upward (2ms E-TTI)...........................................................................2-1595
Upward (10ms E-TTI).........................................................................2-1597
2.52.15 NHR Threshold to Adjust SIR Target Upward (10ms E-TTI) ................2-1599
2.52.16 NHR Threshold to Adjust SIR Target Downward (10ms E-TTI)............2-1601
2.52.17 NHR Threshold to Adjust SIR Target Upward (2ms E-TTI)..................2-1603
2.52.18 NHR Threshold to Adjust SIR Target Downward (2ms E-TTI) .............2-1606
2.52.19 Threshold of Sample Number to Adjust SIR Target Upward (10ms
E-TTI) ...............................................................................................2-1608
2.52.20 Threshold of Sample Number to Adjust SIR Target Downward (10ms
E-TTI) ...............................................................................................2-1610
XXXVIII
SJ-20141209142030-013|2015-11-12 (R1.3)

E-TTI) ............................................................................................... 2-1611
E-TTI) ...............................................................................................2-1613
2.52.23 Physical Channel BER Target For Normal Mode................................2-1615
2.52.24 Physical Channel BER Target For Silent Mode ..................................2-1617
2.52.25 The Number Threshold of Physical Channel BER Less Than or Equal
BER Target........................................................................................2-1619
2.52.26 Error Transport Block Number Threshold for BER Target Adjust in Fast
OLPC SIR Target Downward Adjustment Based on BER ......................2-1621
2.52.27 Transport Block Number Threshold for BER Target Adjust in Fast
OLPC SIR Target Downward Adjustment Based on BER ......................2-1622
2.52.28 BER Target Down Step Size in Fast OLPC SIR Target Downward
Adjustment Based on BER .................................................................2-1623
2.52.29 BER Target Up Step Size in Fast OLPC SIR Target Downward
Adjustment Based on BER .................................................................2-1625
2.52.30 Uplink Outer Loop PC SIR Target Adaptive Down Step Size
Switch ...............................................................................................2-1626
2.52.31 Maximum BER Target in Fast OLPC SIR Target Downward Adjustment
Based on BER ...................................................................................2-1628
2.52.32 Minimum BER Target in Fast OLPC SIR Target Downward Adjustment
Based on BER ...................................................................................2-1629
2.52.33 Uplink Outer Loop PC QE Switch For Silent Mode .............................2-1630
2.52.34 E-DCH HARQ Power Offset FDD .....................................................2-1632
2.52.35 Additional SIR Target Down Step Size ..............................................2-1634
2.52.36 Uplink SIR Target Up Step Size for R99 ............................................2-1636
2.52.37
Uplink SIR Target Up Step Size for HSUPA (2ms E-TTI)
.........................................................................................................2-1637
2.52.38 Uplink SIR Target Up Step Size for HSUPA (10ms E-TTI)...................2-1639
2.52.39 Target Number of HARQ Retransmission ..........................................2-1641
2.52.40 The Target Rate of FP HARQ Retransmission Number Over the Target
(2ms E-TTI) .......................................................................................2-1642
(10ms E-TTI) .....................................................................................2-1644
2.52.42 The BER Threshold of Increasing SIR Target in the Periodic
BER-based OLPC Algorithm...............................................................2-1646
2.52.43 The BER Threshold of Decreasing SIR Target in the Periodic
XXXIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.44 The Time Window Size in the Periodic BER-based OLPC

Algorithm...........................................................................................2-1650
2.52.45 The Number Threshold of TTIs with Data to Enable the Periodic
2.52.46 The Number Threshold of TTIs with Data to Disable the Periodic
2.52.47 The Number Threshold of Trigging SIRtarget Adjustment ...................2-1654
2.52.48 Priority Outer Loop PC Switch ..........................................................2-1655
2.52.49 SIR Target Rapid Convergence Switch..............................................2-1657
2.52.50 Additional SIR Target Down Period of the SIR Target Rapid
Convergence Function .......................................................................2-1659
2.52.51 Time Window Size of Opening Shield Period .....................................2-1660
2.52.52 Threshold of Opening Shield Period..................................................2-1662
2.52.53 Shield Period of SIR Target Increasing Shield Algorithm.....................2-1663
2.53 Power Control Related to Service for Reserved User(URsvdUserSrvPc) .........2-1664
2.53.1 Power Control Related to Service for Reserved User Object ID ............2-1664
2.53.2 Sub-service Type...............................................................................2-1666
2.53.7 Uplink Outer Loop PC SIR Target Adaptive Down Step Size Switch ......2-1674
2.53.8 DPCH Maximum DL Power ................................................................2-1675
2.53.9 DPCH Minimum DL Power.................................................................2-1677
2.53.10 DPCCH Pilot Field Eb/N0.................................................................2-1679
2.53.11 Maximum Allowed Uplink DPCH Transmission Power ........................2-1681
2.53.12 Uplink Initial SIR Target....................................................................2-1682
2.53.13 Maximum Uplink SIR Target .............................................................2-1684
2.53.14 Minimum Uplink SIR Target ..............................................................2-1686
2.53.15 BLER Target....................................................................................2-1687
2.53.16 Error Transport Block Number Threshold ..........................................2-1689
Upward (10ms E-TTI).........................................................................2-1692
Upward (2ms E-TTI)...........................................................................2-1694
XL
SJ-20141209142030-013|2015-11-12 (R1.3)

E-TTI) ...............................................................................................2-1699
E-TTI) ...............................................................................................2-1701
E-TTI) ...............................................................................................2-1706
E-TTI) ...............................................................................................2-1707
2.53.29 Physical Channel BER Target For Silent Mode .................................. 2-1711
BER Target........................................................................................2-1713
2.53.33 Initial Value for BLER Based SIR Target ............................................2-1717
2.53.34 Initial Value for Additional SIR Target ...............................................2-1719
2.53.36 Uplink SIR Target Up Step Size for HSUPA (2ms E-TTI) ....................2-1722
(2ms E-TTI) .......................................................................................2-1727
(10ms E-TTI) .....................................................................................2-1728
2.53.44 Uplink Initial SIR Target (10ms TTI HSUPA) ......................................2-1735
2.53.45 Maximum Uplink SIR Target (10ms TTI HSUPA)................................2-1736
2.53.46 Minimum Uplink SIR Target (10ms TTI HSUPA).................................2-1738
2.53.47 Initial Value for BLER Based SIR Target (10ms TTI HSUPA)...............2-1740
2.53.48 Initial Value for Additional SIR Target (10ms TTI HSUPA) ...................2-1742
2.53.49 Uplink Initial SIR Target (2ms TTI HSUPA) ........................................2-1743
2.53.50 Maximum Uplink SIR Target (2ms TTI HSUPA)..................................2-1745
2.53.51 Minimum Uplink SIR Target (2ms TTI HSUPA) ..................................2-1747
XLI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.53.52 Initial Value for BLER Based SIR Target (2ms TTI HSUPA) ................2-1748
2.53.53 Initial Value for Additional SIR Target (2ms TTI HSUPA).....................2-1750
2.54 Power Control Related to Service for Diamond User
(UDiamondUserSrvPc).................................................................................2-1753
2.54.1 Power Control Related to Service for Diamond User Object ID .............2-1753
2.54.2 Sub-service Type...............................................................................2-1755
2.54.7 Uplink Outer Loop PC SIR Target Adaptive Down Step Size Switch ......2-1762
2.54.10 DPCCH Pilot Field Eb/N0.................................................................2-1767
2.54.11 Maximum Allowed Uplink DPCH Transmission Power ........................2-1769
2.54.15 BLER Target....................................................................................2-1776
2.54.16 Error Transport Block Number Threshold ..........................................2-1778
Upward (10ms E-TTI).........................................................................2-1781
Upward (2ms E-TTI)...........................................................................2-1783
E-TTI) ...............................................................................................2-1788
E-TTI) ..............................................................................................2-1789
E-TTI) ...............................................................................................2-1794
E-TTI) ...............................................................................................2-1796
XLII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.54.29 Physical Channel BER Target For Silent Mode ..................................2-1799

BER Target........................................................................................2-1801
2.54.36 Uplink SIR Target Up Step Size for HSUPA (2ms E-TTI) .................... 2-1811
(2ms E-TTI) .......................................................................................2-1815
(10ms E-TTI) .....................................................................................2-1817
2.55 Power Control Related to Service and Diversity Mode(USrvDivPc) .................2-1842
2.55.1 Power Control Related to Service and Diversity Mode Object ID...........2-1842
2.55.2 Transmit Diversity Mode ....................................................................2-1843
2.55.5 DPCH PO1 .......................................................................................2-1849
2.55.6 DPCH PO2 .......................................................................................2-1850
XLIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.55.7 DPCH PO3 .......................................................................................2-1852

2.55.8 DPCCH Pilot Field Eb/N0...................................................................2-1854
2.55.9 Maximum Allowed Uplink DPCH Transmission Power..........................2-1855
2.55.13 E-AGCH Power Offset for TTI 2ms ...................................................2-1864
2.55.14 E-AGCH Power Offset for TTI 10ms .................................................2-1865
2.55.15 E-RGCH Power Offset for TTI 2ms in Single Link Condition ...............2-1867
2.55.16 E-RGCH Power Offset for TTI 10ms in Single Link Condition..............2-1868
2.55.17 E-HICH Power Offset for TTI 2ms in Single Link Condition .................2-1870
2.55.18 E-HICH Power Offset for TTI 10ms in Single Link Condition ...............2-1871
2.55.19 SCCPCH Power for Single Cell Reception ........................................2-1873
2.55.20 SCCPCH Power for Cell in Half-island Status ....................................2-1874
2.56 Iub Link(UIubLink) .......................................................................................2-1901
2.56.1 Used Module.....................................................................................2-1901
2.56.2 Process Id of NodeB Attached CCMP .................................................2-1902
2.56.3 NodeB Type ......................................................................................2-1903
2.56.4 Co-NodeB HS-PDSCH Code Sharing Method .....................................2-1904
2.56.5 Support Iub HS-DSCH Congestion Detection Indicator ........................2-1906
2.56.6 Support Iub E-DCH Congestion Detection Indicator .............................2-1907
2.56.7 Transport Time Delay ........................................................................2-1909
2.56.8 Transport Time Delay Jitter ................................................................ 2-1911
2.56.9 Co-NodeB HS-PDSCH Code Sharing Update Period...........................2-1912
2.56.10 Adjustment Type for DL Power Balance ............................................2-1914
XLIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.56.11 NodeB Resource Audit Timer ...........................................................2-1915

2.56.12 Diversity Control Field......................................................................2-1916
2.56.13 Time Delay of Deleting Cell When NodeB is Unreachable ..................2-1918
2.56.14 ATM Link Broken Protection Time Length..........................................2-1919
2.56.15 IP Link Broken Protection Time Length .............................................2-1921
2.56.16 Share Mode of CE Resource for Multi-Operators ...............................2-1922
2.56.17 CE Share Switch for Carrier Sharing .................................................2-1924
2.56.18 NodeB support DPI-SPI change indication ........................................2-1925
2.56.19 Associated NodeB ...........................................................................2-1927
2.56.20 Associated UtranCell List .................................................................2-1928
2.56.21 BandWidth of Iub Interface ...............................................................2-1929
2.56.22 CE High Load Threshold ..................................................................2-1930
2.56.23 Cell Group CE CAC Check Switch ....................................................2-1931
2.56.24 Backup Flag ....................................................................................2-1933
2.56.25 Backup RNC ID ...............................................................................2-1934
2.56.26 The Times of No Audit Response .....................................................2-1935
2.56.27 UE Number Threshold Used for Switching Off Pico/Micro NodeB
Intelligently ........................................................................................2-1937
2.56.28 UL Node B Throughput Threshold Used for Switching Off Pico/Micro
NodeB Intelligently .............................................................................2-1938
2.56.29 DL Node B Throughput Threshold Used for Switching Off Pico/Micro
2.56.30 E-DCH Time Based Schedule Switch................................................2-1941
2.56.31 OIC Function Switch ........................................................................2-1942
2.56.32 NodeB No. ......................................................................................2-1944
2.56.33 Adjacent Net Element Identifier ........................................................2-1945
2.56.34 Adjacent NE Version ........................................................................2-1946
2.56.35 Transport BandWidth Release Switch based on Overload ..................2-1947
2.56.36 The protocol version that network element uses ................................2-1949
2.56.37 Measurement Report Trigger Criteria for Pico Cell .............................2-1950
2.56.38 Intra Measurement Interval for Pico Cell............................................2-1951
2.56.39 Inter Measurement Interval for Pico Cell............................................2-1952
2.56.40 GSM Measurement Interval for Pico Cell...........................................2-1954
2.56.41 The First Fixed Time Point to Trigger Measurement for Pico Cell ........2-1955
2.56.42 The Second Fixed Time Point to Trigger Measurement for Pico
Cell ...................................................................................................2-1957
2.56.43 The third Fixed Time Point to Trigger Measurement for Pico Cell ........2-1959
2.56.44 Num of Initial Time Points for Pico Cell..............................................2-1961
XLV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.56.45 Pico Minimum User Number Threshold for Triggering Periodic

Measurement ....................................................................................2-1962
2.57 Logical Iub Link(ULogicalIubLink) .................................................................2-1963
2.57.1 Minimal percent of CE can be used by the PLMN ................................2-1963
2.57.2 Used Transport Bearer Type Profile Related to Basic Priority ...............2-1965
2.57.3 Used Dedicated Service Transport Bearer Qos Profile .........................2-1967
2.58 UTRAN Registration Area(UUtranRegArea) ..................................................2-1968
2.58.1 UTRAN Registration Area Object ID ...................................................2-1968
2.58.2 URA Identity......................................................................................2-1969
2.59 Traffic Volume Measurement Profile(UTrvMeasProfile)...................................2-1970
2.59.1 Traffic Volume Measurement Profile Object ID.....................................2-1970
2.59.2 Profile Id ...........................................................................................2-1972
2.60 UE Traffic Volume Period Measurement Configuration for
RACH(URachPrdUeTrv) ..............................................................................2-1973
2.60.1 UE Traffic Volume Period Measurement Configuration Object ID for
RACH ...............................................................................................2-1973
2.60.2 Measurement Report Transfer Mode ..................................................2-1974
2.60.3 Measurement Quantity ......................................................................2-1976
2.60.4 Time Interval for Taking an Average or a Variance ..............................2-1977
2.60.5 RLC Buffer Payload for Each RB .......................................................2-1979
2.60.6 Average of RLC Buffer Payload for Each RB ......................................2-1980
2.60.7 Variance of RLC Buffer Payload for Each RB .....................................2-1982
2.60.8 Amount of Reporting in Period Report Criteria .....................................2-1983
2.60.9 Reporting Interval in Period Report Criteria .........................................2-1985
2.61 UP Traffic Volume Event Measurement Configuration for
FACH(UFachEvUpTrv).................................................................................2-1986
2.61.1 UP Traffic Volume Event Measurement Configuration Object ID for
FACH ................................................................................................2-1986
2.61.8 Event Number of UE Traffic Volume Measurement .............................2-1997
2.61.9 UE Traffic Volume Measurement Event Identity ..................................2-1998
2.61.10 Traffic Volume Threshold of Event 4A/4B for FACH Channel ..............2-1999
2.61.11 Time to Trigger ...............................................................................2-2001
XLVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.61.12 Pending Time After Trigger ..............................................................2-2004

2.62 UE Traffic Volume Event Measurement Configuration for
DCH(UDchEvUeTrv) ....................................................................................2-2006
2.62.1 UE Traffic Volume Event Measurement Configuration Object ID for
DCH..................................................................................................2-2006
2.62.5 RLC Buffer Payload for Each RB ....................................................... 2-2011
2.62.10 Traffic Volume Threshold of Event 4A/4B for DCH (8kbps) .................2-2019
2.62.11 Traffic Volume Threshold of Event 4A/4B for DCH (16kbps)................2-2020
2.62.14 Traffic Volume Threshold of Event 4A/4B for DCH (128kbps)..............2-2026
2.62.17 Time to Trigger ...............................................................................2-2032
2.62.19 Traffic Volume Threshold of Event 4A/4B for DCH (CS+PS Scene) ......2-2036
2.63 UP Traffic Volume Event Measurement Configuration for
DCH(UDchEvUpTrv) ....................................................................................2-2039
2.63.1 UP Traffic Volume Event Measurement Configuration Object ID for
DCH..................................................................................................2-2039
2.63.10 Traffic Volume Threshold of Event 4A/4B for DCH (8kbps) .................2-2052
XLVII
SJ-20141209142030-013|2015-11-12 (R1.3)

2.63.17 Time to Trigger ...............................................................................2-2065
2.63.19 Traffic Volume Threshold of Event 4A/4B for DCH (CS+PS Scene) ......2-2069
2.64 UE Traffic Volume Period Measurement Configuration for
DCH(UDchPrdUeTrv)...................................................................................2-2072
2.64.1 UE Traffic Volume Period Measurement Configuration Object ID for
DCH..................................................................................................2-2072
2.65 UP Traffic Volume Measurement Configuration Number for Streaming Class
on HS-DSCH(UDedSHsdschEvUpTrv)..........................................................2-2085
2.65.1 UP Traffic Volume Measurement Configuration Number for Streaming
Class on HS-DSCH Object ID .............................................................2-2085
2.65.10 Traffic Volume Threshold of Event 4A/4B for Streaming Class on
HS-DSCH Channel ............................................................................2-2098
2.65.11 Time to Trigger ...............................................................................2-2100
2.66 UP Traffic Volume Measurement Configuration for Interactive and Background
Class on HS-DSCH(UDedIBHsdschEvUpTrv)................................................2-2103
2.66.1 UP Traffic Volume Measurement Configuration for Interactive and
Background Class on HS-DSCH Object ID ..........................................2-2103
XLVIII
SJ-20141209142030-013|2015-11-12 (R1.3)

2.66.6 Average of RLC Buffer Payload for Each RB ...................................... 2-2110
2.66.7 Variance of RLC Buffer Payload for Each RB ..................................... 2-2112
2.66.8 Event Number of UE Traffic Volume Measurement ............................. 2-2113
2.66.9 UE Traffic Volume Measurement Event Identity .................................. 2-2114
2.66.10
Traffic Volume Threshold of Event 4A/4B for Interactive and Background
Class on HS-DSCH Channel
......................................................................................................... 2-2116
2.66.11 Time to Trigger ............................................................................... 2-2118
2.67 UP Traffic Volume Measurement Configuration for HS-DSCH in
CELL_FACH(UComHsdschEvUpTrv)............................................................2-2122
2.67.1 UP Traffic Volume Measurement Configuration for HS-DSCH in
CELL_FACH Object ID .......................................................................2-2122
2.67.10 Traffic Volume Threshold of Event 4A/4B for HS-DSCH Channel in
CELL_FACH......................................................................................2-2134
2.67.11 Time to Trigger ...............................................................................2-2136
2.68 UP Throughput Event Measurement Configuration for E-TTI
Switching(UETTIEdchEvUpTrv) ....................................................................2-2140
2.68.1 UP Throughput Event Measurement Configuration for E-TTI Switching
Object ID ...........................................................................................2-2140
XLIX
SJ-20141209142030-013|2015-11-12 (R1.3)

2.68.10 Throughput Measurement Threshold for E-TTI Switching of Event
4A/4B for E-DCH Channel .................................................................2-2152
2.68.11 Time to Trigger ...............................................................................2-2154
2.69 UP Traffic Volume Measurement Configuration for E-DCH
(UDedEdchEvUpTrv) ...................................................................................2-2158
2.69.1 UP Traffic Volume Measurement Configuration Object ID for E-DCH
.........................................................................................................2-2158
2.69.10 Traffic Volume Threshold of Event 4A/4B for E-DCH Channel.............2-2170
2.69.11 Time to Trigger ...............................................................................2-2172
2.70 UP Traffic Volume Measurement Configuration for E-DCH in
CELL_FACH(UComEdchEvUpTrv) ...............................................................2-2176
2.70.1 UP Traffic Volume Measurement Configuration Object ID for E-DCH ......2-2176
2.70.10 Traffic Volume Threshold of Event 4A/4B for E-DCH Channel in
CELL_FACH......................................................................................2-2188
2.70.11 Time to Trigger ...............................................................................2-2190
L
SJ-20141209142030-013|2015-11-12 (R1.3)
2.71 E-DCH Throughput Measurement Configuration for HS-DSCH/E-DCH to

HS-DSCH/DCH Switching(UEdchtoDchUpTrv) ..............................................2-2194
2.71.1 E-DCH Throughput Measurement Configuration Object ID for
HS-DSCH/E-DCH to HS-DSCH/DCH Switching ...................................2-2194
2.71.2 Time Interval for Taking an Average or a Variance ...............................2-2195
2.71.3 Event Number of UE Traffic Volume Measurement ..............................2-2196
2.71.4 UE Traffic Volume Measurement Event Identity ...................................2-2198
2.71.5 Pending Time After Trigger ................................................................2-2199
2.71.6 Time to Trigger ..................................................................................2-2201
2.71.7 E-DCH Throughput Measurement Threshold of Event 4A/4B for
HS-DSCH/E-DCH to HS-DSCH/DCH Switching ...................................2-2203
2.71.8 Measurement Quantity.......................................................................2-2204
2.71.10 RLC Buffer Payload for Each RB ......................................................2-2207
2.71.11 Average of RLC Buffer Payload for Each RB .....................................2-2209
2.71.12 Variance of RLC Buffer Payload for Each RB.....................................2-2210
2.72 UE Traffic Volume Event Measurement Configuration for
PCH(UPchEvUeTrv) ....................................................................................2-2212
2.72.1 UE Traffic Volume Event Measurement Configuration for PCH Object
ID .....................................................................................................2-2212
2.72.2 Time Interval for Taking an Average or a Variance ...............................2-2213
2.72.3 UE Traffic Volume Measurement Event Identity ...................................2-2214
2.72.4 Event Number of UE Traffic Volume Measurement ..............................2-2216
2.72.5 Measurement Quantity.......................................................................2-2217
2.72.7
Traffic Volume Threshold of Event 4A/4B for UE on PCH State
.........................................................................................................2-2220
2.73 Intra-frequency Measurement Profile(UIntraMeasProfile) ...............................2-2222
2.73.1 Intra-frequency Measurement Profile Object ID ...................................2-2222
2.73.2 Intra-frequency Measurement Profile Identity ......................................2-2223
2.73.3 Mobility Configuration Scene ..............................................................2-2224
2.74 Intra-frequency Measurement Configuration Related to Traffic
Category(UIntraMeasSrvSpec) .....................................................................2-2226
2.74.1 Intra-frequency Measurement Configuration Related to Traffic Category
Object ID ...........................................................................................2-2226
2.74.2 Service and Bearer Type Used for Differentiating Handover
Configuration ....................................................................................2-2227
LI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.75 UE Intra-frequency Event Measurement Configuration for CPICH

Ec/No(UIntraEcNoEvMeas) ..........................................................................2-2229
2.75.1 UE Intra-frequency Event Measurement Configuration for CPICH Ec/No
Object ID ...........................................................................................2-2229
2.75.2 Filter Coefficient ................................................................................2-2230
2.75.3 Event Number of Intra-frequency Measurement...................................2-2232
2.75.4 Intra-frequency Event Identity.............................................................2-2233
2.75.5 Reporting Range Constant for Event 1A/1B.........................................2-2235
2.75.6 Weight for Event 1A/1B......................................................................2-2236
2.75.7 Hysteresis.........................................................................................2-2238
2.75.8 Threshold of the Quality of the Used Frequency for Event 1E/1F ..........2-2240
2.75.9 Reporting Deactivation Threshold for Event 1A....................................2-2242
2.75.10 Replacement Activation Threshold for Event 1C and 1J .....................2-2243
2.75.11 Time to Trigger ................................................................................2-2245
2.75.12 Amount of Reporting for Event 1A/1B/1C/1J ......................................2-2247
2.75.13 Reporting Interval for Event 1A/1B/1C/1J ..........................................2-2248
2.76 UE Intra-frequency Event Measurement Configuration for CPICH
RSCP(UIntraRscpEvMeas) ..........................................................................2-2250
2.76.1 UE Intra-frequency Event Measurement Configuration for CPICH RSCP
Object ID ...........................................................................................2-2250
2.76.3 Event Number of Intra-frequency Measurement...................................2-2253
2.76.4 Intra-frequency Event Identity.............................................................2-2255
2.76.7 Hysteresis.........................................................................................2-2260
2.76.8 Threshold of the Quality of the Used Frequency for Event 1E/1F ..........2-2261
2.76.10 Replacement Activation Threshold for Event 1C and 1J .....................2-2265
2.76.11 Time to Trigger ................................................................................2-2266
2.76.12 Amount of Reporting for Event 1A/1B/1C/1J ......................................2-2268
2.76.13 Reporting Interval for Event 1A/1B/1C/1J ..........................................2-2270
2.77 Intra-frequency Measurement Configuration Unrelated to Traffic
Category(UIntraMeasNoSrvSpec).................................................................2-2272
2.77.1 Intra-frequency Measurement Configuration Unrelated to Traffic
Category Object ID ............................................................................2-2272
2.78 UE Intra-frequency Period Measurement Configuration for CPICH
Ec/No(UIntraEcNoPrdMeas).........................................................................2-2273
LII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.78.1 UE Intra-frequency Period Measurement Configuration for CPICH

Ec/No Object ID .................................................................................2-2273
2.79 UE Intra-frequency Period Measurement Configuration for CPICH
RSCP(UIntraRscpPrdMeas) .........................................................................2-2279
2.79.1 UE Intra-frequency Period Measurement Configuration for CPICH
RSCP Object ID.................................................................................2-2279
2.80 Detected Set Measurement Configuration for CPICH
Ec/No(UIntraEcNoEvMeasForD) ..................................................................2-2286
2.80.1 Detected SetMeasurement Configuration for CPICH Ec/No Object
ID .....................................................................................................2-2286
2.80.5 Hysteresis.........................................................................................2-2292
2.80.7 Time to Trigger ..................................................................................2-2296
2.80.8 Amount of Reporting for Event 1A/1B/1C/1J........................................2-2298
2.80.9 Reporting Interval for Event 1A/1B/1C/1J ............................................2-2299
2.81 Detected Set Measurement Configuration for CPICH
RSCP(UIntraRscpEvMeasForD) ...................................................................2-2301
2.81.1 Detected SetMeasurement Configuration for CPICH RSCP Object
ID .....................................................................................................2-2301
2.81.5 Hysteresis.........................................................................................2-2308
2.81.7 Time to Trigger .................................................................................. 2-2311
2.81.8 Amount of Reporting for Event 1A/1B/1C/1J........................................2-2313
2.81.9 Reporting Interval for Event 1A/1B/1C/1J ............................................2-2314
2.82 UE Inter-frequency Measurement Profile(UInterMeasProfile)..........................2-2316
2.82.1 UE Inter-frequency Measurement Profile Object ID..............................2-2316
2.82.2 Inter-frequency Measurement Profile Identity ......................................2-2317
LIII
SJ-20141209142030-013|2015-11-12 (R1.3)

2.83 Inter-frequency Measurement Configuration Related to Traffic
Category(UInterMeaSrvSpec).......................................................................2-2320
2.83.1 Inter-frequency Measurement Configuration Related to Traffic Category
Object ID ...........................................................................................2-2320
Configuration .....................................................................................2-2321
2.84 UE Inter-frequency Event Measurement Configuration for CPICH
Ec/No(UTRAN)(UInterEcNoEvMeasforU) ......................................................2-2323
2.84.1 UE Inter-frequency Event Measurement Configuration Object ID for
CPICH Ec/No (UTRAN)......................................................................2-2323
2.84.3 Event Number of Inter-frequency Measurement...................................2-2326
2.84.4 Inter-frequency Event Identity.............................................................2-2328
2.84.5 Absolute Threshold of the Quality of the Currently Used Frequency for
2B/2D/2F...........................................................................................2-2329
2.84.6 Weight of the Currently Used Frequency for 2A/2B/2D/2F ....................2-2331
2.84.7 Hysteresis.........................................................................................2-2333
2.84.8 Time to Trigger ..................................................................................2-2334
2.84.9 Absolute Threshold of the Quality of the Non-used Frequency for
2B/2C/2E...........................................................................................2-2336
2.84.10 Weight of the Non-used Frequency for 2A/2B/2C/2E..........................2-2338
RSCP(UTRAN)(UInterRscpEvMeasforU) ......................................................2-2340
CPICH RSCP (UTRAN)......................................................................2-2340
2B/2D/2F...........................................................................................2-2346
2.85.6 Weight of the Currently Used Frequency for 2A/2B/2D/2F ....................2-2348
2.85.7 Hysteresis.........................................................................................2-2350
2.85.8 Time to Trigger ..................................................................................2-2351
2.85.9 Absolute Threshold of the Quality of the Non-used Frequency for
2B/2C/2E...........................................................................................2-2353
2.85.10 Weight of the Non-used Frequency for 2A/2B/2C/2E..........................2-2355
Ec/No(GSM)(UInterEcNoEvMeasforG)..........................................................2-2357
LIV
SJ-20141209142030-013|2015-11-12 (R1.3)

CPICH Ec/No (GSM)..........................................................................2-2357
2D/2F................................................................................................2-2363
2.86.6 Weight of the Currently Used Frequency for 2D/2F ..............................2-2365
2.86.7 Hysteresis.........................................................................................2-2367
2.86.8 Time to Trigger ..................................................................................2-2368
RSCP(GSM)(UInterRscpEvMeasforG) ..........................................................2-2370
2.87.1 Inter-frequency Event Measurement Configuration Object ID for CPICH
RSCP (GSM).....................................................................................2-2371
2D/2F................................................................................................2-2377
2.87.7 Hysteresis.........................................................................................2-2380
2.87.8 Time to Trigger ..................................................................................2-2382
Ec/No(EUTRAN)(UInterEcNoEvMeasforE) ....................................................2-2384
CPICH Ec/No (EUTRAN)....................................................................2-2384
2D/2F................................................................................................2-2390
2.88.7 Hysteresis.........................................................................................2-2394
2.88.8 Time to Trigger ..................................................................................2-2395
RSCP(EUTRAN)(UInterRscpEvMeasforE) ....................................................2-2397
CPICH RSCP (EUTRAN) ...................................................................2-2398
LV
SJ-20141209142030-013|2015-11-12 (R1.3)

2D/2F................................................................................................2-2404
2.89.7 Hysteresis.........................................................................................2-2407
2.89.8 Time to Trigger ..................................................................................2-2409
2.90 Inter-frequency Measurement Configuration Unrelated to Traffic
Category(UInterMeasNoSrvSpec)................................................................. 2-2411
2.90.1 Inter-frequency Measurement Configuration Unrelated to Traffic
Category Object ID ............................................................................ 2-2411
2.91 UE Inter-frequency Period Measurement Configuration for CPICH
Ec/No(UInterEcNoPrdMeas).........................................................................2-2413
2.91.1 UE Inter-frequency Period Measurement Configuration Object ID for
CPICH Ec/No ....................................................................................2-2413
2.92 UE Inter-frequency Period Measurement Configuration for CPICH
RSCP(UInterRscpPrdMeas) .........................................................................2-2419
2.92.1 UE Inter-frequency Period Measurement Configuration Object ID for
CPICH RSCP ....................................................................................2-2419
2.93 Inter-RAT Measurement Profile(URatMeasProfile) .........................................2-2425
2.93.1 Inter-RAT Measurement Profile Object ID............................................2-2425
2.93.2 Inter-Rat Measurement Profile Identity ................................................2-2427
2.94 Inter-RAT Measurement Configuration Related to Traffic
Category(URatMeasSrvSpec) ......................................................................2-2429
2.94.1 Inter-RAT Measurement Configuration Related to Traffic Category
Object ID ...........................................................................................2-2429
Configuration .....................................................................................2-2431
2.95 UE Inter-RAT Event Measurement Configuration for CPICH
Ec/No(GSM)(URatEcNoEvMeasforG) ...........................................................2-2433
2.95.1 UE Inter-RAT Event Measurement Configuration Object ID for CPICH
Ec/No (GSM) .....................................................................................2-2433
LVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.95.2 UTRAN Filter Coefficient ....................................................................2-2434

2.95.3 GSM Filter Coefficient........................................................................2-2436
2.95.4 Inter-RAT Measurement Event Number...............................................2-2438
2.95.5 Inter-RAT Event Identity ....................................................................2-2439
2.95.6 Absolute Threshold of the Quality of UTRAN Cell for 3A ......................2-2440
2.95.7 Weight of the UTRAN System for 3A ..................................................2-2442
2.95.8 Absolute Threshold of the Quality of Other RAT for 3A/3B/3C...............2-2444
2.95.9 Hysteresis.........................................................................................2-2446
2.95.10 Time to Trigger ................................................................................2-2448
RSCP(GSM)(URatRscpEvMeasforG) ...........................................................2-2449
RSCP (GSM).....................................................................................2-2449
2.96.3 GSM Filter Coefficient........................................................................2-2453
2.96.9 Hysteresis.........................................................................................2-2463
2.96.10 Time to Trigger ................................................................................2-2464
Ec/No(EUTRAN)(URatEcNoEvMeasforE) .....................................................2-2466
Ec/No (EUTRAN) ...............................................................................2-2466
2.97.3 EUtran Filter Coefficient .....................................................................2-2469
2.97.9 Hysteresis.........................................................................................2-2479
2.97.10 Time to Trigger ................................................................................2-2481
RSCP(EUTRAN)(URatRscpEvMeasforE)......................................................2-2483
LVII
SJ-20141209142030-013|2015-11-12 (R1.3)

RSCP (EUTRAN)...............................................................................2-2483
2.98.3 EUtran Filter Coefficient .....................................................................2-2486
2.98.9 Hysteresis.........................................................................................2-2496
2.98.10 Time to Trigger ................................................................................2-2498
2.99 Inter-RAT Measurement Configuration Unrelated to Traffic
Category(URatMeasNoSrvSpec) ..................................................................2-2500
2.99.1 Inter-RAT Measurement Configuration Unrelated to Traffic Category
Object ID ...........................................................................................2-2500
2.100 UE Inter-RAT Period Measurement Configuration for CPICH
Ec/No(URatEcNoPrdMeas) ..........................................................................2-2502
2.100.1 UE Inter-RAT Period Measurement Configuration Object ID for CPICH
Ec/No................................................................................................2-2502
2.100.2 UTRAN Filter Coefficient ..................................................................2-2503
2.100.3 GSM Filter Coefficient ......................................................................2-2505
2.100.4 EUtran Filter Coefficient ...................................................................2-2507
2.100.5 Amount of Reporting in Period Report Criteria ...................................2-2508
2.100.6 Reporting Interval in Period Report Criteria .......................................2-2510
2.101 UE Inter-RAT Period Measurement Configuration for CPICH
RSCP(URatRscpPrdMeas) .......................................................................... 2-2511
2.101.1 UE Inter-RAT Period Measurement Configuration Object ID for CPICH
RSCP................................................................................................ 2-2511
2.101.2 UTRAN Filter Coefficient ..................................................................2-2513
2.101.3 GSM Filter Coefficient ......................................................................2-2515
2.101.4 EUtran Filter Coefficient ...................................................................2-2517
2.101.6 Reporting Interval in Period Report Criteria .......................................2-2520
2.102 NodeB Common Measurement Profile(UNbComMeasProfile).......................2-2521
2.102.1 NodeB Common Measurement Profile Object ID ...............................2-2521
2.102.2 Profile Id .........................................................................................2-2523
2.102.3 Initial Load Scene ............................................................................2-2524
2.103 NodeB Common Measurement Configuration(UNbComMeas)......................2-2525
2.103.1 NodeB Common Measurement Configuration Object ID .....................2-2525
LVIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.103.2 Function of Configuration Parameters ...............................................2-2526

2.103.3 Common Measurement Object Type .................................................2-2528
2.103.4 Common Measurement Type ...........................................................2-2529
2.103.5 Measurement Filter Coefficient .........................................................2-2531
2.103.6 Report Characteristics .....................................................................2-2532
2.103.7 Choice Report Periodicity Scale........................................................2-2534
2.103.8 Report Period ..................................................................................2-2535
2.104 NodeB Dedicated Measurement Profile(UNbDedMeasProfile) ......................2-2537
2.104.1 NodeB Dedicated Measurement Profile Object ID..............................2-2537
2.104.2 Profile Id .........................................................................................2-2538
2.105 NodeB Dedicated Measurement Configuration(UNbDedMeas) .....................2-2539
2.105.1 NodeB Dedicated Measurement Configuration Object ID ...................2-2539
2.105.2 Function of configuration Parameters................................................2-2541
2.105.3 Dedicated Measurement Type ..........................................................2-2544
2.105.4 Measurement Filter Coefficient .........................................................2-2546
2.105.5 Report Characteristics .....................................................................2-2548
2.105.6 Measurement Threshold 1 of Event E/F for SIR Error.........................2-2551
2.105.7 Downlink Rate Level Threshold used for D-TCP Measurement in
DASF-PS ..........................................................................................2-2553
2.105.8 Measurement Threshold of Event A/B for Transmitted Code
Power ...............................................................................................2-2555
2.105.9 Measurement Threshold 2 of Event E/F for SIR Error.........................2-2557
2.105.10 Measurement Change Time/Measurement Hysteresis Time .............2-2559
2.105.11 Choice Report Periodicity Scale ......................................................2-2561
2.105.12 Report Period ................................................................................2-2562
2.106 External ENodeB Function(UExternalENBFunction).....................................2-2564
2.106.1 External ENodeB Function Object ID ................................................2-2564
2.106.2 ENodeB ID......................................................................................2-2565
2.106.3 ENodeB Type ..................................................................................2-2566
2.106.4 RncID .............................................................................................2-2568
2.107 External EUTRAN Cell FDD(UExternalEUtranCellFDD) ...............................2-2569
2.107.1 External EUTRAN Cell FDD Object ID ..............................................2-2569
2.107.2 EUTRAN Physical Cell Identity .........................................................2-2570
2.107.3 PLMN Number of Sharing the EUTRAN Cell .....................................2-2572
2.107.4 Mobile Country Code .......................................................................2-2573
2.107.5 Mobile Network Code.......................................................................2-2574
2.107.6 MNC BCD Code Length ...................................................................2-2575
2.107.7 EUTRAN Cell Identity ......................................................................2-2576
LIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.107.8 Eutran Frequency Band Indicator .....................................................2-2578

2.107.9 Downlink EUTRAN Absolute Radio Frequency Channel Number ........2-2580
2.107.10 Uplink EUTRAN Absolute Radio Frequency Channel Number ..........2-2583
2.107.11 Sharing Mobile Country Code .........................................................2-2586
2.107.12 Sharing Mobile Network Code ........................................................2-2588
2.107.13 sharing MNC Length ......................................................................2-2589
2.107.14 Tracking Area Code .......................................................................2-2590
2.107.15 EUTRAN Measurement Bandwidth .................................................2-2592
2.107.16 Location Area Code .......................................................................2-2593
2.107.17 Routing Area Code ........................................................................2-2594
2.107.18 Eutran Downlink Load Threshold ....................................................2-2595
2.107.19 Eutran Uplink Load Threshold ........................................................2-2597
2.108 External EUTRAN Cell TDD(UExternalEUtranCellTDD) ...............................2-2598
2.108.1 External EUTRAN Cell TDD Object ID ..............................................2-2598
2.108.3 PLMN Number of Sharing the EUTRAN Cell .....................................2-2601
2.108.6 MNC BCD Code Length ...................................................................2-2605
2.108.7 EUTRAN Cell Identity ......................................................................2-2606
2.108.11 Sharing Mobile Network Code.........................................................2-2613
2.108.13 Tracking Area Code .......................................................................2-2616
2.108.14 EUTRAN Measurement Bandwidth .................................................2-2617
2.108.15 Location Area Code .......................................................................2-2618
2.108.16 Routing Area Code ........................................................................2-2620
2.108.17 Eutran Downlink Load Threshold ....................................................2-2621
2.108.18 Eutran Uplink Load Threshold ........................................................2-2623
2.109 External RNC Function (UExternalRncFunction) ..........................................2-2624
2.109.1 External RNC Function Object ID......................................................2-2624
2.109.4 Adjacent RNC Identity......................................................................2-2628
2.109.5 Sharing Mobile Country Code...........................................................2-2629
LX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.109.6 Sharing Mobile Network Code ..........................................................2-2630

2.109.7 Used Iur Link...................................................................................2-2631
2.109.8 SRNC Diversity Combination Indicator ..............................................2-2632
2.109.9 DRNC Diversity Combination Indicator..............................................2-2634
2.110 External UTRAN Cell(UExternalUtranCellFDD)............................................2-2635
2.110.1 External UTRAN Cell Object ID.........................................................2-2635
2.110.2 Cell Identity ....................................................................................2-2636
2.110.5 RNC Identity of Adjacent cell ............................................................2-2640
2.110.6 Cell Mode........................................................................................2-2642
2.110.7 Location Area Code .........................................................................2-2643
2.110.8 Routing Area Code ..........................................................................2-2644
2.110.9 HCS_PRIO......................................................................................2-2645
2.110.10 RACH Maximum Allowed UL TX Power ..........................................2-2647
2.110.11 Qrxlevmin in SIB11.........................................................................2-2648
2.110.12 DeltaQrxlevmin in SIB11.................................................................2-2650
2.110.13 Frequency Band Indicator...............................................................2-2651
2.110.14 UUARFCN.....................................................................................2-2653
2.110.15 DUARFCN.....................................................................................2-2655
2.110.16 Cell Primary Scrambling Code ........................................................2-2657
2.110.17 Primary CPICH Power....................................................................2-2658
2.110.18 Qqualmin in SIB11 .........................................................................2-2659
2.110.19 STTD Support Indicator..................................................................2-2661
2.110.20 Closed Loop Mode 1 Support Indicator............................................2-2662
2.110.21 MNC BCD Code Length ................................................................2-2663
2.110.25 Service Area Code for CS and PS Domain ......................................2-2668
2.110.26 Used UTRAN Registration Area ......................................................2-2670
2.110.27 Shared Network Area Code Number ...............................................2-2671
2.110.28 Shared Network Area Code ............................................................2-2672
2.110.29 HSPA Support Method ...................................................................2-2674
2.110.30 F-DPCH Support Indicator ..............................................................2-2675
2.110.31 Neighboring Cell Enhanced F-DPCH Support Indicator ....................2-2676
2.110.32 MIMO Support Indicator .................................................................2-2677
LXI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.33 Mimo64Qam Support Indicator .......................................................2-2679

2.110.34 64QAM DL Support Indicator ..........................................................2-2680
2.110.35 Adjacent Cell Uplink Enhanced Layer 2 Support Indicator.................2-2681
2.110.36 Flexible MAC-d PDU Size Support Indicator ....................................2-2682
2.110.37 Dual-Cell HS-DSCH Support Indication ...........................................2-2684
2.110.38 Primary CPICH Power Configuration Tag.........................................2-2685
2.110.39 Cell Description Type .....................................................................2-2687
2.110.40 Polygon Point Number ...................................................................2-2688
2.110.41 Polygon Point Latitude Sign ............................................................2-2690
2.110.42 Degree of Polygon Point Latitude ....................................................2-2691
2.110.43 Degrees of Polygon Point Longitude ...............................................2-2692
2.110.44 Latitude Sign for Cell Center ...........................................................2-2694
2.110.45 Degree of Latitude for Cell Center ...................................................2-2695
2.110.46 Degrees of Longitude for Cell Center...............................................2-2697
2.110.47 Cell Altitude for Cell Center.............................................................2-2698
2.110.48 Direction of Altitude for Cell Center .................................................2-2700
2.110.49 Altitude accuracy ...........................................................................2-2701
2.110.50 Altitude accuracy Code...................................................................2-2702
2.110.51 Confidence ....................................................................................2-2703
2.110.52 Cell Radius....................................................................................2-2705
2.110.53 Horizontal Accuracy Code ..............................................................2-2706
2.110.54 Antenna Type ................................................................................2-2707
2.110.55 Antenna Latitude Sign ....................................................................2-2708
2.110.56 Degree of Antenna Latitude ............................................................2-2710
2.110.57 Degrees of Antenna Longitude........................................................ 2-2711
2.110.58 Antenna Altitude ............................................................................2-2712
2.110.59 Direction of Antenna Altitude ..........................................................2-2713
2.110.60 Offset Angle...................................................................................2-2715
2.110.61 Inner Angle....................................................................................2-2716
2.110.62 Switch of CS 64kbps Establishment for External UTRAN Cell ...........2-2717
2.110.63 DeltaQrxlevmin in SIB11 Configuration Tag......................................2-2719
2.110.64 TUTRAN-GPS Measurement Support Indicator................................2-2720
2.110.65 Support SRNC-NODEB HS-DSCH Congestion Detection
Indicator ............................................................................................2-2721
2.110.66 Support SRNC-NODEB E-DCH Congestion Detection Indicator........2-2723
2.110.67 2ms E-TTI Support Indicator ...........................................................2-2725
2.110.68 E-DCH SF Capability .....................................................................2-2726
2.110.69 E-DCH HARQ Combining Capability ...............................................2-2728
LXII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.70 Max UE DTX Cycle ........................................................................2-2729

2.110.71 CPC DTX-DRX Support Indicator....................................................2-2730
2.110.72 CPC HS-SCCH less Support Indicator ............................................2-2732
2.110.73 Qqualmin in SIB12 .........................................................................2-2733
2.110.74 Qrxlevmin in SIB12 ........................................................................2-2734
2.110.75 DeltaQrxlevmin in SIB12 Configuration Tag .....................................2-2736
2.110.76 DeltaQrxlevmin in SIB12 ................................................................2-2737
2.110.77 Transport Time Delay .....................................................................2-2739
2.110.78 Transport Time Delay Jitter .............................................................2-2740
2.110.79 Maximum Bit Rate on DL DCH for NRT PS RAB in External UTRAN
Cell ...................................................................................................2-2742
2.110.80 Maximum Bit Rate on UL DCH for NRT PS RAB in External UTRAN
Cell ...................................................................................................2-2743
2.110.81 Maximum Bit Rate on DL DCH for RT PS RAB in External UTRAN
Cell ...................................................................................................2-2745
2.110.82 Maximum Bit Rate on UL DCH for RT PS RAB in External UTRAN
Cell ...................................................................................................2-2746
2.110.83 Maximum Bit Rate on E-DCH for NRT PS RAB in External UTRAN
Cell ...................................................................................................2-2748
2.110.84 Maximum Bit Rate on E-DCH for RT PS RAB in External UTRAN
Cell ...................................................................................................2-2750
2.110.85 External UTRAN Cell Dual Cell+MIMO Support Indicator..................2-2751
2.110.86 Reserved Parameter 1 for External UTRAN Cell ..............................2-2753
2.110.95 Reserved Parameter 10 for External UTRAN Cell ............................2-2763
2.110.96 Sixteen QAM UL Support Indicator..................................................2-2764
2.110.97 E-DPCCH Power Boosting Support Indicator ...................................2-2765
2.110.98 Cell MIMO Precoding Weight Set Restriction Support Indicator .........2-2767
2.110.99 Geographical Area Report Type ......................................................2-2768
2.110.100 Classified Zone Indicator of DRNC cell ..........................................2-2769
2.110.101 DB DC-HSDPA Support Indicator on Iur ........................................2-2771
LXIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.102 Number of DB Secondary Serving Cell ..........................................2-2772

2.110.103 DB Secondary Serving Cell ID ......................................................2-2773
2.110.104 HSDPA Function Status................................................................2-2775
2.110.105 Number of SF=16 Used in HS-PDSCH ..........................................2-2776
2.110.106 Number of SF=128 Used in HS-SCCH ..........................................2-2777
2.110.107 DPCH STTD Indication of DRNC cell when UE actives the MIMIO
and uses P-CPICH and S-CPICH as phase reference ..........................2-2779
2.110.108 DC-HSUPA Support Indicator on Iur ..............................................2-2780
2.110.109 Separate Iur Transport Bearer Support Indicator ............................2-2781
2.110.110 E-DCH UL Flow Multiplexing Support Indicator...............................2-2783
2.110.111 DRNC Cell Type ...........................................................................2-2784
2.110.112 External UTRAN Cell Dual Band Dual Cell+MIMO Support
Indicator ............................................................................................2-2785
2.110.113 The RNC ID of Backup Cell...........................................................2-2787
2.110.114 The Cell ID of Backup Cell ............................................................2-2788
2.110.115 Multi-Cell HS-DSCH Supported Indication for the Cell over Iur ........2-2789
2.110.116 HSDPA 3 or 4 Adjacent-carrier and MIMO Capability for Single Band
over Iur..............................................................................................2-2791
2.110.117 HSDPA 3 or 4 Carrier and MIMO Capability for Dual Band over
Iur .....................................................................................................2-2792
2.110.118 Max Number of HS-DSCH Secondary Serving Cell over Iur ............2-2793
2.110.119 Possible Secondary Serving Cell ID List over Iur ............................2-2795
2.110.120 Multicell E-DCH Restriction over Iur...............................................2-2797
2.110.121 Multiflow HSDPA Supported Indication for the Cell over Iur .............2-2798
2.111 External GSM Cell(UExternalGsmCell) ........................................................2-2800
2.111.1 External GSM Cell Object ID.............................................................2-2800
2.111.2 Cell Identifier ...................................................................................2-2801
2.111.3 BCCH ARFCN .................................................................................2-2802
2.111.4 Network Colour Code .......................................................................2-2804
2.111.5 Base Station Colour Code ................................................................2-2805
2.111.6 Location Area Code .........................................................................2-2806
2.111.7 Mobile Country Code........................................................................2-2808
2.111.8 Mobile Network Code .......................................................................2-2809
2.111.9 Routing Area Code...........................................................................2-2810
2.111.10 Routing Area Colour Code ..............................................................2-2812
2.111.11 MNC BCD Code Length .................................................................2-2813
LXIV
SJ-20141209142030-013|2015-11-12 (R1.3)

2.111.15 GERAN Cell Indicator.....................................................................2-2818
2.111.16 BSC Identifier ................................................................................2-2819
2.111.17 Shared Network Area Code Number................................................2-2820
2.111.18 Shared Network Area Code ............................................................2-2821
2.111.19 Band Indicator................................................................................2-2823
2.111.20 Maximum Allowed UL TX Power .....................................................2-2824
2.111.21 HCS_PRIO ....................................................................................2-2826
2.111.22 Qrxlevmin in SIB11.........................................................................2-2827
2.111.23 DeltaQrxlevmin in SIB11 Configuration Tag ......................................2-2828
2.111.24 DeltaQrxlevmin in SIB11 .................................................................2-2830
2.111.25 Qrxlevmin in SIB12.........................................................................2-2831
2.111.26 DeltaQrxlevmin in SIB12 Configuration Tag......................................2-2833
2.111.27 DeltaQrxlevmin in SIB12.................................................................2-2834
2.111.28 Cell Individual Offset.......................................................................2-2835
2.111.29 GSM Downlink Load Threshold .......................................................2-2837
2.111.30 GSM Uplink Load Threshold ...........................................................2-2838
2.111.31 GSM Downlink RT Load Threshold..................................................2-2840
2.111.32 GSM Uplink RT Load Threshold ......................................................2-2841
2.111.33 Indoor Cell Indicator .......................................................................2-2843
2.112 UTRAN Cell(UUtranCellFDD) .....................................................................2-2844
2.112.1 UTRAN Cell Object ID......................................................................2-2844
2.112.2 Cell Identity .....................................................................................2-2845
2.112.3 Local Cell Identity ............................................................................2-2846
2.112.4 Cell Maximum Transmission Power ..................................................2-2848
2.112.5 PICH Power ....................................................................................2-2849
2.112.6 Cell Mode........................................................................................2-2850
2.112.7 Used Location Area .........................................................................2-2852
2.112.8 Used Routing Area ..........................................................................2-2853
2.112.9 Used Service Area in CS+PS Domain ...............................................2-2854
2.112.10 Frequency Band Indicator...............................................................2-2855
2.112.11 DUARFCN.....................................................................................2-2857
2.112.12 UUARFCN.....................................................................................2-2859
2.112.13 Cell Primary Scrambling Code ........................................................2-2861
2.112.14 P-CPICH Power.............................................................................2-2862
2.112.15 Primary SCH Power .......................................................................2-2863
2.112.16 Secondary SCH Power...................................................................2-2865
LXV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.17 BCH Power ...................................................................................2-2866

2.112.18 AICH Power ..................................................................................2-2868
2.112.19 Minimum Required Quality Level in the Cell (Qqualmin) ...................2-2869
2.112.20 Minimum Required Received Level in the Cell (Qrxlevmin) ...............2-2870
2.112.21 Increment to the Minimum Required Received Level in the Cell
(DeltaQrxlevmin)................................................................................2-2872
2.112.22 Cell Reserved for Operator Use ......................................................2-2873
2.112.23 STTD Support Indicator..................................................................2-2875
2.112.24 Closed Loop Mode 1 Support Indicator............................................2-2876
2.112.25 Used UTRAN Registration Area ......................................................2-2877
2.112.26 Cell Individual Offset .....................................................................2-2879
2.112.27 Used Iub Link ................................................................................2-2880
2.112.28 HCS_PRIO....................................................................................2-2881
2.112.29 PCH Power ..................................................................................2-2883
2.112.30 Address.........................................................................................2-2884
2.112.31 Quality Threshold Level for Applying Prioritised Hierarchical Cell
Reselection (QHcs) When Measurement Quantity is CPICH Ec/No .......2-2885
Reselection (QHcs) When Measurement Quantity is CPICH RSCP .......2-2887
2.112.33 Increment to the Minimum Required Received Level in the Cell
Configuration Tag...............................................................................2-2888
2.112.34 Used NodeB Common Measurement Profile....................................2-2890
2.112.35 Used Traffic Volume Measurement Profile .......................................2-2891
2.112.36 Used UE Internal Measurement Profile............................................2-2892
2.112.37 T_Cell ...........................................................................................2-2894
2.112.38 Pathloss Scenario ..........................................................................2-2895
2.112.39 Used Service Area in BC Domain....................................................2-2897
2.112.40 Sector Identity ...............................................................................2-2898
2.112.41 Cell Description Type .....................................................................2-2899
2.112.42 Polygon Point Number ...................................................................2-2900
2.112.43 Polygon Point Latitude Sign ............................................................2-2902
2.112.44 Degree of Polygon Point Latitude ....................................................2-2903
2.112.45 Degrees of Polygon Point Longitude ...............................................2-2905
2.112.46 Latitude Sign for Cell Center ...........................................................2-2906
2.112.47 Degree of Latitude for Cell Center ...................................................2-2908
2.112.48 Degrees of Longitude for Cell Center...............................................2-2909
2.112.49 Cell Altitude for Cell Center............................................................. 2-2911
2.112.50 Direction of Altitude for Cell Center .................................................2-2912
LXVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.51 Altitude accuracy ...........................................................................2-2913

2.112.52 Altitude accuracy Code...................................................................2-2915
2.112.53 Confidence ....................................................................................2-2916
2.112.54 Cell Radius....................................................................................2-2917
2.112.55 Horizontal Accuracy Code ..............................................................2-2918
2.112.56 Geographical Area Report Type ......................................................2-2919
2.112.57 Antenna Type ................................................................................2-2921
2.112.58 Antenna Latitude Sign ....................................................................2-2922
2.112.59 Degree of Antenna Latitude ............................................................2-2923
2.112.60 Degrees of Antenna Longitude........................................................2-2924
2.112.61 Antenna Altitude ............................................................................2-2925
2.112.62 Direction of Antenna Altitude...........................................................2-2927
2.112.63 Offset Angle...................................................................................2-2928
2.112.64 Inner Angle....................................................................................2-2929
2.112.65 HSPA Support Method ...................................................................2-2931
2.112.66 MBMS Support Indicator ................................................................2-2932
2.112.67 Multi-User Detection Support Indicator ............................................2-2934
2.112.68 TUTRAN-GPS Measurement Support Indicator................................2-2935
2.112.69 CS Traffic Preferred Indicator..........................................................2-2936
2.112.70 R99 PS Traffic Preferred Indicator...................................................2-2938
2.112.71 HS PS Traffic Preferred Indicator ....................................................2-2939
2.112.72 Use of HCS in Cell Reselection.......................................................2-2940
2.112.73 UE Tx Power Switch for Handover ..................................................2-2942
2.112.74 UL BLER Switch for Handover ........................................................2-2943
2.112.75 DL Tx Power Switch for Handover...................................................2-2945
2.112.76 SIB12 Indicator ..............................................................................2-2946
2.112.77 HSDPA Function Status .................................................................2-2948
2.112.78 HSUPA Function Status .................................................................2-2949
2.112.79 MBMS Function Status...................................................................2-2950
2.112.80 Used Intra-frequency Measurement Profile ......................................2-2952
2.112.81 Intra-frequency Measurement Profile Identity for Reserved User .......2-2953
2.112.82 Used UE Inter-frequency Measurement Profile ................................2-2954
2.112.83 Used Inter-RAT Measurement Profile ..............................................2-2955
2.112.84 Cell Type .......................................................................................2-2957
2.112.85 Background Noise Automatic Adjustment Scene ..............................2-2958
2.112.86 The Number of Consecutive In-Sync Indications NodeB
Received After which RL Restore Procedure Shall be Triggered
(N_INSYNC_IND) ..............................................................................2-2959
LXVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.87 The Number of Consecutive Out-of-Sync Indications NodeB

Received After which the Timer T_RLFAILURE Shall be Started
(N_OUTSYNC_IND) ..........................................................................2-2961
2.112.88 Timer Length for Trigger Radio Link Failure Procedure After NodeB
Receive N_OUTSYNC_IND Consecutive Out-of-Sync Indication
(T_RLFAILURE).................................................................................2-2963
2.112.89 Classified Zone Indicator ................................................................2-2964
2.112.90 Detected Set Handover Switch .......................................................2-2965
2.112.91 Inter-frequency Handover Tactic......................................................2-2967
2.112.92 Inter-RAT Handover Tactic..............................................................2-2968
2.112.93 Maximum Allowable Rate on DCH to be Increased to When UE is in
Macro Diversity ..................................................................................2-2970
2.112.94 Maximum Bit Rate on DL DCH for NRT PS RAB in Serving Cell........2-2971
2.112.95 Maximum Bit Rate on UL DCH for NRT PS RAB in Serving Cell........2-2973
2.112.96 UTRAN Measurement Quantity for Inter-frequency and Inter-RAT
Measurements...................................................................................2-2974
2.112.97 UTRAN Measurement Quantity for Intra-frequency
Measurements...................................................................................2-2976
2.112.98 Used Power Control Profile Related to Service ................................2-2977
2.112.99 SIB4 Indicator ................................................................................2-2979
2.112.100 SIB6 Indicator ..............................................................................2-2980
2.112.101 PCCPCH Information in SIB6 Configuration Tag.............................2-2982
2.112.102 Dynamic Persistence Level Information of SIB6 PRACH in SIB7
Configuration Tag...............................................................................2-2983
2.112.103 SIB7 Originator ............................................................................2-2985
2.112.104 Cpich Ec/No Threshold for Blind Handover ....................................2-2986
2.112.105 Cpich RSCP Threshold for Blind Handover ....................................2-2987
2.112.106 DL TPC Pattern 01 Count .............................................................2-2989
2.112.107 Cells for Reserved RUB Indicator ..................................................2-2990
2.112.108 Switch of Fast Return to Eutran when Eutran CSFB CS is
released ............................................................................................2-2992
2.112.109 Maximum Allowed UL TX Power of RACH ....................................2-2993
2.112.110 PRACH Configuration Scene ........................................................2-2995
2.112.111 DB DC-HSDPA Support Indicator ..................................................2-2997
2.112.112 Used DPI Application Service Scene Profile ...................................2-2998
2.112.113 Switch of CS Call Re-establishment Triggered by Receiving the
CELL UPDATE Message from UE when SRNC is in Stable Status........2-3000
CELL UPDATE Message from UE when SRNC is in Handover Flow ......2-3001
LXVIII
SJ-20141209142030-013|2015-11-12 (R1.3)

CELL UPDATE Message from UE when SRNC is in RAB Setup
Flow..................................................................................................2-3003
2.112.116 Switch of CS Call Re-establishment Triggered by RAN Network
when SRNC is in Stable Status ...........................................................2-3004
2.112.117 Switch of CS Call Re-establishment Triggered by RAN network
when SRNC is in Handover Flow ........................................................2-3006
2.112.118 Switch of CS Call Re-establishment Triggered by RAN network
when SRNC is in RAB Setup Flow ......................................................2-3007
CELL UPDATE Message from UE when SRNC is in RB/Trch/Phych
Reconfig Flow....................................................................................2-3009
2.112.120 Switch of PS Call Re-establishment Triggered by Receiving the
CELL UPDATE Message from UE when SRNC is in Stable Status........2-3010
CELL UPDATE Message from UE when SRNC is in Handover Flow ......2-3012
CELL UPDATE Message from UE when SRNC is in RAB Setup
Flow..................................................................................................2-3014
2.112.123 Switch of PS Call Re-establishment Triggered by RAN Network
when SRNC is in Stable Status ...........................................................2-3015
2.112.124 Switch of PS Call Re-establishment Triggered by RAN network
when SRNC is in Handover Flow ........................................................2-3017
2.112.125 Switch of PS Call Re-establishment Triggered by RAN network
when SRNC is in RAB Setup Flow ......................................................2-3018
Reconfig Flow....................................................................................2-3020
2.112.127 Virtual Location Area Code ...........................................................2-3021
2.112.128 Scenario Type..............................................................................2-3023
2.112.129 Number of the Codes with SF =128 Ordered for OCNS ..................2-3024
2.112.130 Code Node Number with SF =128 for OCNS .................................2-3025
2.112.131 Switch of CS 64kbps Establishment ..............................................2-3026
2.112.132 Cell F-DPCH Support Indicator .....................................................2-3028
2.112.133 Cell Enhanced F-DPCH Support Indicator .....................................2-3029
2.112.134 Cell 64QAM Support Indicator.......................................................2-3030
2.112.135 Cell MIMO Support Indicator .........................................................2-3031
2.112.136 Cell CPC Support Indicator ...........................................................2-3033
2.112.137 Cell HSUPA 2ms TTI Support Indicator..........................................2-3034
LXIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.138 Cell MIMO and DL64QAM Combined Capability Support

Indicator ............................................................................................2-3035
2.112.139 Dual-Cell HS-DSCH Support Indication .........................................2-3037
2.112.140 Switch of RRC Redirection Triggered by Radio Resource
Congestion ........................................................................................2-3038
2.112.141 Prior Redirect RAT Indicator..........................................................2-3040
2.112.142 Wait Time for RRC Connection Reestablishment............................2-3041
2.112.143 Downlink Enhanced CELL_FACH Support Indicator .......................2-3043
2.112.144 Uplink Enhanced CELL_FACH Support Indicator ...........................2-3044
2.112.145 Cell Dual Cell+MIMO Support Indicator .........................................2-3045
2.112.146 Radio Capacity of Cell ..................................................................2-3047
2.112.147 Cell Load Scene ..........................................................................2-3048
2.112.148 Balance Scene.............................................................................2-3049
2.112.149 SCCPCH Configuration Scene......................................................2-3051
2.112.150 Mobility Configuration Scene.........................................................2-3053
2.112.151 Cell Radius Scene........................................................................2-3054
2.112.152 Cell Available Subchannel Number Continuity Setting Indicator.......2-3056
2.112.153 Switch of Deferred SIB11/11bis/12 Support ....................................2-3058
2.112.154 Priority of Frequency Switch Off ....................................................2-3059
2.112.155 Used Access Control Profile Related to Basic Priority ....................2-3061
2.112.156 Used Scheduling Priority Mapping Relationship Profile ...................2-3062
2.112.157 Used Application Priority Mapping Relationship Profile (Load
Control) ............................................................................................2-3064
2.112.158 Used Application Priority Mapping Relationship Profile (Congestion
Control) .............................................................................................2-3065
2.112.159 Non-Reserved CS User Number Threshold When Reserved User
Exists ................................................................................................2-3067
2.112.160 Non-Reserved PS User Number Threshold When Reserved User
Exists ................................................................................................2-3068
2.112.161 Dual Cell HSUPA Support Indication .............................................2-3070
2.112.162 Switch of support the Eutran Neighbouring cell blacklist..................2-3071
2.112.163 Used HS-PDSCH Measurement Power Offset profile .....................2-3072
2.112.164 Maximum Number of Users on HS-DSCH .....................................2-3074
2.112.165 Maximum Number of Users on E-DCH .........................................2-3075
2.112.166 Cell Dual Band Dual Cell+MIMO Support Indicator .........................2-3076
2.112.167 Enhanced PCH Support Indicator..................................................2-3078
2.112.168 PICH Share Switch between Enhanced PCH and PCH...................2-3079
2.112.169 The Cell ID of Backup Cell ............................................................2-3081
LXX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.170 Cell DB-MC+MIMO Support Indicator ............................................2-3082

2.112.171 Cell SB-MC+MIMO Support Indicator ............................................2-3083
2.112.172 HSDPA 3 or 4 Carrier Supported Indication....................................2-3085
2.112.173 Switch of Fast Return to Eutran when Eutran SRVCC CS is
released ............................................................................................2-3086
2.112.174 The Number of UE Signalling Trace Data Collection Configuration
Index Related to Cell ..........................................................................2-3088
2.112.175 UE Signalling Trace Data Collection Configuration Index Related to
Cell ...................................................................................................2-3089
2.112.176 Cell Unique Identifier ....................................................................2-3090
2.112.177 Switch of Controlling HSUPA Service Initially Established on 2ms
E-TTI or 10ms E-TTI ..........................................................................2-3091
2.112.178 Sending Times of Paging Message of CS ......................................2-3092
2.112.179 Sending Times of Paging Message of PS ......................................2-3094
2.112.180 Switch of Load Balance Based on the Number of FACH UEs
(CELL_PCH/URA_PCH->CELL_FACH) ..............................................2-3095
2.112.181 Switch of Load Balance Based on the Number of FACH UEs
(CELL_DCH->CELL_FACH) ...............................................................2-3097
2.112.182 Fast Return Dch Switch ................................................................2-3098
2.112.183 Smart Handover Switch ................................................................2-3100
2.112.184 Switch of Absolute Priority based Reselection in CELL_FACH
State .................................................................................................2-3102
2.112.185 Switch of Measurement based Redirection to LTE When RRC
Setup ................................................................................................2-3103
2.112.186 Switch of Measurement based Fast Return to LTE for UE in
CELL_FACH State .............................................................................2-3104
2.112.187 Maximum Number of Users on E-DCH for High Cell Load...............2-3106
2.112.188 Load Based Adaptive RRC Parameter Adjustment Switch ..............2-3107
2.112.189 Load Based Adaptive DRBC Parameter Adjustment Switch ............2-3109
2.112.190 Load Based Adaptive Admission Control Parameter Adjustment
Switch ............................................................................................... 2-3110
2.112.191 Load Based Adaptive Paging Parameter Adjustment Switch ........... 2-3112
2.112.192 The Cell Lever Switch for Attempting Switching to the CELL_FACH
State After Congestion when PS RB Establishment.............................. 2-3113
2.112.193 Multiflow HSDPA Supported Indication .......................................... 2-3115
2.112.194 RACH Self-Optimization Function Switch....................................... 2-3116
2.112.195 Downlink E-UTRAN Absolute Radio Frequency Channel Number for
Indicating Frequency Priority............................................................... 2-3117
2.112.196 Frequency Priority for E-UTRAN Inter-RAT Handover or
Redirection ........................................................................................ 2-3119
LXXI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.197 Number of EUTRAN Centre Frequencies.......................................2-3121

2.112.198 Small Cell Interference Detection Switch .......................................2-3122
2.112.199 Preferred Carrier Indicator for Preferred Camping in Multi-carriers
Network.............................................................................................2-3124
2.112.200 Multi-Carrier Power Optimization Function Switch ..........................2-3125
2.112.201 Used SPID and priority relation Profile...........................................2-3126
2.112.202 Switch for RRC Establishment Cause Differentiation in Basic Priority
Setting ..............................................................................................2-3128
2.113 Extended Info of UTRAN Cell(UCelInfoFDD) ...............................................2-3129
2.113.1 Cell Extended Info Configuration Object ID ........................................2-3129
2.113.2 Start Time to Switch Off Frequency Intelligently .................................2-3130
2.113.3 End Time to Switch Off Frequency Intelligently ..................................2-3132
2.113.4 UE Number Threshold Used for Switching Off Frequency
Intelligently ........................................................................................2-3134
2.113.5 Trigger Time of judgment Switching On/Off Frequency Intelligently ......2-3135
2.113.6 Switch of Algorithm Used to Switch On the Frequency Intelligently ......2-3136
2.113.7 Switch of Algorithm Used to Switch Off the Frequency Intelligently ......2-3138
2.113.8 Forbidden Time of Switching Off After Switching On the Frequency ......2-3140
2.113.9 Maximum Bit Rate on DL DCH for RT PS RAB in Serving Cell............2-3141
2.113.10 Maximum Bit Rate on UL DCH for RT PS RAB in Serving Cell ..........2-3143
2.113.11 Maximum Bit Rate on E-DCH for NRT PS RAB in Serving Cell..........2-3144
2.113.12 Maximum Bit Rate on E-DCH for RT PS RAB in Serving Cell............2-3145
2.113.13 DL Controlled MBR Switch .............................................................2-3147
2.113.14 DL Controlled MBR ........................................................................2-3148
2.113.15 UL Controlled MBR Switch .............................................................2-3150
2.113.16 UL Controlled MBR ........................................................................2-3151
2.113.17 Switch of Cell Restriction ................................................................2-3153
2.113.18 Switch of Polling in Cell Restriction .................................................2-3154
2.113.19 Number of Cell Barred AC ..............................................................2-3156
2.113.20 Time Interval of Barred AC .............................................................2-3157
2.113.21 Service Handover Switch................................................................2-3159
2.113.22 Absolute Priority Reselection Criteria Switch....................................2-3160
2.113.23 Inter Frequency or Inter RAT handover Switch .................................2-3161
2.113.24 Transport Band Width for Downlink Enhanced CELL_FACH,
CELL_PCH and URA_PCH ................................................................2-3163
2.113.25 E-FACH DRX Support Indication in Cell...........................................2-3165
2.113.26 Choice Strategy in Multi-RAT Handover...........................................2-3166
2.113.27 Adding New Radio Link Judgment Switch ........................................2-3167
LXXII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.28 Reserved Bit Rate for I&B Scheduling E-DCH Traffic in Load Adaptive
Power Control Algorithm.....................................................................2-3169
2.113.29 Cell Reserved Parameter 1.............................................................2-3170
2.113.35 Cell Reserved Parameter 10...........................................................2-3177
2.113.36 Cell Reserved Parameter 11 ...........................................................2-3178
2.113.46 Shield Period for Increasing SIR Target in Threshold Algorithm .........2-3190
2.113.47 Power Offset for Downlink DPCH Initial Power Calculation when Call
Setup ................................................................................................2-3191
2.113.48 Power Offset for Downlink DPCH Initial Power Calculation when Soft
or Softer Handover.............................................................................2-3193
2.113.49 Power Offset for Downlink DPCH Initial Power Calculation when RAB
Hard Handover ..................................................................................2-3194
2.113.50 Power Offset for Downlink DPCH Initial Power Calculation when SRB
Hard Handover ..................................................................................2-3196
2.113.51 Power Offset for Downlink DPCH Initial Power Calculation when RAB
Re-Establishment...............................................................................2-3198
2.113.52 Cell Uplink Admission Control Switch ..............................................2-3199
2.113.53 Cell Downlink Admission Control Switch ..........................................2-3201
2.113.54 Cell HSDPA Throughput Admission Control Switch ..........................2-3202
2.113.55 Nominal Pathloss ...........................................................................2-3204
2.113.56
Threshold of the Users Number of the RRC Connection only in
CELL_DCH state Co-Exist in the Cell
.........................................................................................................2-3205
LXXIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.57 Background Noise Automatic Adjustment Switch .............................2-3207

2.113.58 Original Background Noise Configuration ........................................2-3209
2.113.59 Maximum Number of Users on Downlink Enhanced CELL_FACH ......2-3210
2.113.60 Reference SF Layer Used for Code Reservation in CAC ..................2-3212
2.113.61 DPCH PC Preamble Length ...........................................................2-3214
2.113.62 SRB Delay ....................................................................................2-3215
2.113.63 Cell Uplink 16QAM Support Indicator ..............................................2-3217
2.113.64 Cell Downlink Load Threshold for AMR Data Rate Decision..............2-3218
2.113.65 Cell Uplink Load Threshold for AMR Data Rate Decision ..................2-3219
2.113.66 User Number with Compressed Mode Activation for Balance Strategy
Based On Measurement.....................................................................2-3221
2.113.67 P-CPICH Power Down Step Size Used to Switch Off Frequency
Intelligently ........................................................................................2-3222
2.113.68 Time Interval between two Downgrade of P-CPICH Power Used to
Switch Off Frequency Intelligently .......................................................2-3224
2.113.69 Times of Downgrade of P-CPICH Power with Equal Step Used to
Switch Off Frequency Intelligently .......................................................2-3225
2.113.70 Default CPICH Ec/No .....................................................................2-3227
2.113.71 Common Transfer Bandwidth Discount Factor for Channel ...............2-3228
2.113.72 Intra-frequency reporting quantity SIB3 when SIB11/11bis/12 deferred
reading..............................................................................................2-3230
2.113.73 UE Inter-frequency FDD Measurement Indicator ..............................2-3231
2.113.74 UE Inter-System Measurement Indicator .........................................2-3233
2.113.75 DL Power Margin for Frequency Switch Off Judgment ......................2-3234
2.113.76 UL Interference Margin for Frequency Switch Off Judgment..............2-3235
2.113.77 DL Code Margin for Frequency Switch Off Judgment .......................2-3237
2.113.78 UL CE Margin for Frequency Switch Off Judgment...........................2-3238
2.113.79 DL CE Margin for Frequency Switch Off Judgment...........................2-3240
2.113.80 HSDPA User Number Margin for Frequency Switch Off Judgment ......2-3241
2.113.81 HSUPA User Number Margin for Frequency Switch Off Judgment ......2-3243
2.113.82 DL Power Margin for Frequency Switch On Judgment ......................2-3244
2.113.83 UL Interference Margin for Frequency Switch On Judgment..............2-3245
2.113.84 DL Code Margin for Frequency Switch On Judgment .......................2-3247
2.113.85 UL CE Margin for Frequency Switch On Judgment...........................2-3248
2.113.86 DL CE Margin for Frequency Switch On Judgment...........................2-3250
2.113.87 HSDPA User Number Margin for Frequency Switch On Judgment ......2-3251
2.113.88 HSUPA User Number Margin for Frequency Switch On Judgment ......2-3252
2.113.89 Indication of Whether the Frequency Switch Off is Allowed or Not ......2-3254
LXXIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.90 Indication of CE Evaluation for Switching Off Frequency

Intelligently ........................................................................................2-3255
2.113.91 S-CPICH Deactivation Support Indicator..........................................2-3257
2.113.92 Threshold of MIMO User Number to Deactivate the Secondary
Antenna ............................................................................................2-3258
2.113.93 Threshold of MIMO User Number to Activate the Secondary
Antenna ............................................................................................2-3259
2.113.94 Trigger Time to Activate or Deactivate the S-CPICH .........................2-3261
2.113.95 Safe Threshold for NodeB ..............................................................2-3262
2.113.96 Filtering Limit of Inter-Frequency Neighboring Cell Number ..............2-3263
2.113.97 Filtering Limit of GSM Neighboring Cell Number .............................2-3265
2.113.98 Event 1A/1C/1D of DRNC's Cells for CS Service Strategy Switch ......2-3266
2.113.99 Switch for Setting R99 Power Ratio for Different PLMN ...................2-3268
2.113.100 Switch for Limiting the Maximum R99 Power when HSDPA User
Exists ...............................................................................................2-3269
2.113.101 Offset of the Threshold Stop R99 Load Decreasing Relative to the
R99 Maximum Power when HSDPA User Exists ..................................2-3271
2.113.102 Switch of PLMN DPCH Code Sharing............................................2-3272
2.113.103 DPCCH Power Offset for Secondary UL Frequency .......................2-3274
2.113.104 Reserved Bit Rate for I&B Scheduling E-DCH Traffic ......................2-3275
2.113.105 The Button of Upating SIB completely ...........................................2-3277
2.113.106 Switch of SIB Scheduling Optimization ..........................................2-3278
2.113.107 Time To Trigger for Inter-frequency and Inter-Rat Period
Measurement ....................................................................................2-3280
2.113.108 Non-Reserved CS User Number Threshold for Reserved
Neighboring Cells...............................................................................2-3281
2.113.109 Non-Reserved PS User Number Threshold for Reserved
Neighboring Cells...............................................................................2-3283
2.113.110 Low HSDPA User Number Level Threshold....................................2-3284
2.113.111 High HSDPA User Number Level Threshold ...................................2-3286
2.113.112 Bad Coverage P-CPICH Ec/No Threshold Used for AMR Service or
RRC Connection Setup ......................................................................2-3287
2.113.113 Bad Coverage P-CPICH RSCP Threshold Used for AMR Service or
RRC Connection Setup ......................................................................2-3289
2.113.114 Cell Level PCH Switch ..................................................................2-3290
2.113.115 SIB18 Indicator ............................................................................2-3292
2.113.116 Switch of the Uplink Channel Allocation Strategy For Bad
Coverage ..........................................................................................2-3293
2.113.117 P-CPICH Ec/No Threshold for Bad E-DCH Coverage ....................2-3295
LXXV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.118 P-CPICH RSCP Threshold for Bad E-DCH Coverage ....................2-3296

2.113.119 Switch of the HS-DSCH/E-DCH to HS-DSCH/DCH Channel
Switching Triggered by UE Transmitted Power and Throughput ............2-3297
2.113.120 The Switch for Load based BLER Function ....................................2-3299
2.113.121 Default Load Level .......................................................................2-3300
2.113.122 Low RoT Level Threshold .............................................................2-3302
2.113.123 High RoT Level Threshold ............................................................2-3303
2.113.124 Uplink Low Equivalent AMR User Number Level Threshold ............2-3305
2.113.125 Uplink High Equivalent AMR User Number Level Threshold............2-3306
2.113.126 Downlink Low Load Level Threshold Used in Load Based Power
Control Parameter Configuration .........................................................2-3308
2.113.127 Downlink High Load Level Threshold Used in Load Based Power
Control Parameter Configuration .........................................................2-3310
2.113.128 Switch of TCP Optimization .......................................................... 2-3311
2.113.129 Switch of TCP Statistics................................................................2-3313
2.113.130 RoT Level Threshold Used for E-TTI Switching ..............................2-3314
2.113.131 FACH Measurement Configuration Indicator ..................................2-3315
2.113.132 The Judgement Times for HSUPA Unhappy State ..........................2-3317
2.113.133 The Trigger Threshold of User Number for HSUPA Unhappy
State .................................................................................................2-3318
2.113.134 The Trigger Threshold of User Rate for HSUPA Unhappy State ......2-3319
2.113.135 The Recovering Threshold of User Number for HSUPA Unhappy
State .................................................................................................2-3321
2.113.136 R99 Minimum Bitrate for Downgrade when Cell in HSUPA Unhappy
State .................................................................................................2-3322
2.113.137 Cell LoggedMDT Switch ...............................................................2-3324
2.113.138 Logged Measurement Configuration Ratio .....................................2-3325
2.113.139 Switch of Using the IE "Management Based MDT Allowed" ............2-3326
2.113.140 Timer for Logging Duration ...........................................................2-3328
2.113.141 Logging Interval ...........................................................................2-3329
2.113.142 Trace Identity ...............................................................................2-3330
2.113.143 Trace Collection Entity Identity ......................................................2-3331
2.113.144 Logged MDT Area Scope Type .....................................................2-3333
2.113.145 ANR Self Configuration Support Indicator for Pico Cell ...................2-3334
2.113.146 ANR Selfoptimization Support Indicator .........................................2-3335
2.113.147 PSC Self Configuration Support Indicator for Pico Cell ...................2-3336
2.113.148 Pico Cell PSC Validity Indicator .....................................................2-3338
2.113.149 PSC Self Optimization Support Indicator for Pico Cell.....................2-3339
LXXVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.150 Pico Neighboring Cell Mutual Configuration Indicator......................2-3340

2.113.151 Percentage Threshold of New Report NRT Within the Configured
Non-whitelist Cell to New Report NRT .................................................2-3342
2.113.152 Non-Reserved CS User Number Threshold for Reserved
Carrier...............................................................................................2-3343
2.113.153 Non-Reserved PS User Number Threshold for Reserved
Carrier...............................................................................................2-3345
2.113.154 Minimum Handover Ratio Threshold of Deleting Intra-frequency
Neighbor Cell.....................................................................................2-3346
2.113.155 Minimum Handover Ratio Threshold of Deleting Inter-frequency
Neighbor Cell.....................................................................................2-3348
2.113.156 Minimum Handover Ratio Threshold of Deleting GSM Neighbor
Cell ...................................................................................................2-3349
2.113.157 Minimum Handover Ratio Threshold of Deleting Eutran Neighbor
Cell ...................................................................................................2-3350
2.113.158 Period of BMC Scheduling Messages Configuration Tag.................2-3352
2.113.159 Period of BMC Scheduling Messages............................................2-3353
2.113.160 CBS Frame Offset .......................................................................2-3355
2.113.161 Period of CTCH Allocation ............................................................2-3356
2.113.162 Maximum Bit Rate allowed for Signalling in Cell .............................2-3358
2.113.163 Switch of PS Service Fast Return to Eutran when CS is released for
Eutran CSFB Multi-RAB Service .........................................................2-3360
2.113.164 Pico Cell ANR Neighboring Cell Configuration Validity Indicator ......2-3361
2.113.165 Number of Paging Indicators per PICH Frame for PCH...................2-3363
2.113.166 Number of Paging Indicators per PICH Frame for Enhanced
PCH..................................................................................................2-3364
2.113.167 Cell Code Reserved Admission Control Switch ..............................2-3366
2.113.168 Downlink Low Load Threshold Used in CPU Load Decreasing
Function ............................................................................................2-3367
2.113.169 Uplink Low Load Threshold...........................................................2-3369
2.113.170 Downlink High Rate Threshold ......................................................2-3370
2.113.171 Uplink High Rate Threshold ..........................................................2-3372
2.113.172 Switch of Radio web acceleration ..................................................2-3373
2.113.173 Cell level Switch of Partner Service Optimization............................2-3375
2.113.174 Cell Level Switch of DPI based QoS Algorithm...............................2-3376
2.113.175 Switch of Reconfiguration Procedure Optimization .........................2-3377
2.113.176 Switch of Judging Target Cell's Minimum Quality in Inter-frequency
Handover .........................................................................................2-3379
LXXVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.177 Switch of Fast Return to Eutran for PS Only when UE RRC Status
Transferring from CELL_DCH to CELL_FACH .....................................2-3380
2.113.178 Uplink Rx Gain Provided by Tower Mounted Amplifier.....................2-3382
2.113.179 Cell Level Interpolation Switch When QPSK Is Used ......................2-3383
2.113.180 Cell Level Boosting Switch When QPSK Is Used............................2-3384
2.113.181 Switch of PS Service Fast Return to Eutran when CS is released for
Eutran SRVCC Multi-RAB Service ......................................................2-3385
2.113.182 CPICH EcN0 Threshold for CFN offset compensation ....................2-3387
2.113.183 RSCP Threshold for CFN offset compensation...............................2-3388
2.113.184 Guard Time Used for Switching Off Pico/Micro NodeB
Intelligently ........................................................................................2-3390
2.113.185 DL Power Margin Used for Switching Off Pico/Micro NodeB
Intelligently ........................................................................................2-3391
2.113.186 UL Interference Margin Used for Switching Off Pico/Micro NodeB
Intelligently ........................................................................................2-3393
2.113.187 DL Code Margin Used for Switching Off Pico/Micro NodeB
Intelligently ........................................................................................2-3394
2.113.188 UL CE Margin Used for Switching Off Pico/Micro NodeB
Intelligently ........................................................................................2-3395
2.113.189 DL CE Margin Used for Switching Off Pico/Micro NodeB
Intelligently ........................................................................................2-3397
2.113.190 HSDPA User Number Margin Used for Switching Off Pico/Micro
2.113.191 HSUPA User Number Margin Used for Switching Off Pico/Micro
2.113.192 Bad Coverage P-CPICH Ec/No Threshold Used for CS+PS
Scene ...............................................................................................2-3401
2.113.193 Bad Coverage P-CPICH RSCP Threshold Used for CS+PS
Scene ...............................................................................................2-3402
2.113.194 Switch of Blind Handover triggered by Second-Try .........................2-3404
2.113.195 Intra-frequency Hard Handover Switch ..........................................2-3405
2.113.196 Switch of Redirection to Inter-frequency without Measurement for
Poor Quality of UMTS Used Frequency ...............................................2-3407
2.113.197 Switch of Redirection to GSM without Measurement for Poor Quality
of UMTS Used Frequency ..................................................................2-3408
2.113.198 Switch of Redirection to EUTRAN without Measurement for Poor
Quality of UMTS Used Frequency .......................................................2-3410
2.113.199 Maximum Number of Reported Cells on RACH .............................. 2-3411
2.113.201 Cell Reserved Parameter 7bit9 ............................................ 2-3414
LXXVIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.202 Cell Reserved Parameter 7(bit0) ...................................................2-3415

2.113.205 ANR Self Configuration Support Indicator for Pico Cell ...................2-3420
2.113.206 PSC Self Configuration Support Indicator for Pico Cell ...................2-3421
2.113.207 PSC Self Optimization Support Indicator for Pico Cell.....................2-3422
2.113.208 E-DCH User Number Share Switch for Multi-PLMN in cell level.......2-3424
2.113.209 Minimum Required Quality Level in the Cell (Qqualmin) in
SIB4/SIB12........................................................................................2-3425
2.113.210 Minimum Required Received Level in the Cell (Qrxlevmin) in
SIB4/SIB12........................................................................................2-3427
2.113.211 DeltaQrxlevmin in SIB4/SIB12 Configuration Tag............................2-3428
2.113.212 DeltaQrxlevmin in SIB4/SIB12 ......................................................2-3430
2.113.213 LAC/RAC Self Configuration Support Indicator for Pico Cell ............2-3431
2.113.214 Uplink Equivalent User Number High Load Threshold Used for
Admission Control..............................................................................2-3433
2.113.215 Uplink Equivalent User Number Load Recover Threshold Used for
Admission Control..............................................................................2-3434
2.114 Logic Cell Configuration(ULogicalCell) ........................................................2-3436
2.114.1 Logic Cell Configuration Object ID ....................................................2-3436
2.114.2 Common PLMN Indicator .................................................................2-3437
2.114.3 Used UTRAN Cell............................................................................2-3439
2.114.4 CS Domain Specific Access Class N Barred Indicator (N=015)........2-3440
2.114.5 PS Domain Specific Access Class N Barred Indicator (N=015) ........2-3441
2.114.6 Access Percent of the PLMN for Non-Supporting UEs........................2-3442
2.114.7 Switch of CS Domain DSAR .............................................................2-3444
2.114.8 Switch of PS Domain DSAR .............................................................2-3446
2.114.9 Switch of Paging and Location/Registration Restriction ......................2-3448
2.114.10 Switch of Polling in CS Domain DSAR.............................................2-3450
2.114.11 Switch of Polling in PS Domain DSAR .............................................2-3451
2.114.12 Number of Barred AC in CS Domain ...............................................2-3453
2.114.13 Number of Barred AC in PS Domain ...............................................2-3454
2.114.14 R99 Power Ratio when Carrier Sharing ...........................................2-3455
2.114.15 Dpch Code Ratio of PLMN Code sharing ........................................2-3457
2.114.16 Cell Switch of Blind Handover from Large Coverage Cell to Small
Coverage Cell....................................................................................2-3458
2.114.17 Minimal E-DCH User Number Percent Guaranteed ..........................2-3459
2.114.18 HS Power Ratio when Carrier Sharing.............................................2-3461
LXXIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.115 Neighbouring Cell(UUtranRelation) .............................................................2-3462

2.115.1 Neighbouring Cell Object ID .............................................................2-3462
2.115.2 Used External UTRAN Cell...............................................................2-3463
2.115.3 Used UTRAN Cell............................................................................2-3465
2.115.4 Share Cover Indication.....................................................................2-3466
2.115.5 Measurement Priority of Neighboring Cell..........................................2-3467
2.115.6 UE State Indicator Used for UTRAN Neighboring Cell
Configuration .....................................................................................2-3469
2.115.7 Broadcast in either SIB11 or SIB11bis ...............................................2-3471
2.115.8 Use of HCS in Cell Reselection.........................................................2-3472
2.115.9 Penalty Time in SIB11 ......................................................................2-3474
2.115.10 Temporary Offset When Measurement Quantity is CPICH RSCP
(Temporary_offset1) Broadcasted in SIB11 ..........................................2-3475
2.115.11 Temporary Offset When Measurement Quantity is CPICH Ec/No
2.115.12 Cell Individual Offset ......................................................................2-3478
2.115.13 Quality Offset 1 (Qoffset1s, n) Between Serving Cell and
Neighbouring Cell Broadcasted in SIB11 .............................................2-3479
2.115.14 Quality Offset 2 (Qoffset2s, n ) Between Serving Cell and
Reselection (Qhcs) of Neighbouring Cell When Measurement Quantity
is CPICH Ec/No Broadcasted in SIB11 ................................................2-3482
is CPICH RSCP Broadcasted in SIB11 ................................................2-3484
is CPICH Ec/No Broadcasted in SIB12 ................................................2-3486
is CPICH RSCP Broadcasted in SIB12................................................2-3487
2.115.20 Quality Offset2 (Qoffset2s, n) Between Serving Cell and Neighbouring
Cell Broadcasted in SIB12 ..................................................................2-3490
2.115.21 Penalty Time in SIB12 ....................................................................2-3492
2.115.22 Temporary Offset When Measurement Quantity is CPICH RSCP
LXXX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.115.23 Temporary Offset When Measurement Quantity is CPICH Ec/No

2.115.24 White List Cell Indicator for ANR .....................................................2-3496
2.115.25 Black List Cell Indicator for ANR .....................................................2-3497
2.115.26 Quality Offset 1 (Qoffset1s,n) Between Serving Cell and Neighbouring
Cell Broadcasted in SIB11 for Cell Random Reselection in Camping
Strategy Switch..................................................................................2-3499
2.115.27 Quality Offset 2 (Qoffset2s,n ) Between Serving Cell and
Neighbouring Cell Broadcasted in SIB11 for Cell Random Reselection in
Camping Strategy Switch ...................................................................2-3500
2.115.28 Quality Offset 1 (Qoffset1s,n) Between Serving Cell and Neighbouring
Cell Broadcasted in SIB12 for Cell Random Reselection in Camping
Strategy Switch..................................................................................2-3502
2.115.29 Quality Offset 2 (Qoffset2s,n ) Between Serving Cell and
Neighbouring Cell Broadcasted in SIB12 for Cell Random Reselection
in Camping Strategy Switch ................................................................2-3504
2.115.30 Cell Individual Offset for Macro and Small Concurrent Scenario ........2-3505
2.116 GSM Neighbouring Cell(UGsmRelation)......................................................2-3507
2.116.1 GSM Neighbouring Cell Object ID.....................................................2-3507
2.116.2 Used External GSM Cell...................................................................2-3508
2.116.3 Does Neighbouring Cell Belong to Self Physical RNC ........................2-3509
2.116.4 Share Cover Indication.....................................................................2-3510
2.116.5 Measurement Priority of Neighboring GSM Cell .................................2-3512
2.116.6 UE State Indicator Used for GSM Neighboring Cell Configuration .......2-3514
2.116.7 Broadcast in either SIB11 or SIB11bis ...............................................2-3515
2.116.8 Use of HCS in Cell Reselection.........................................................2-3517
2.116.9 Quality Offset 1 (Qoffset1s, n) Between Serving Cell and Neighbouring
Cell Broadcasted in SIB11 ..................................................................2-3518
2.116.10 Quality Threshold Level (Qhcs) of Neighbouring Cell Broadcasted in
SIB11 ................................................................................................2-3520
2.116.12 Temporary_offset1 in SIB11 ............................................................2-3523
2.116.14 Quality Threshold Level (Qhcs) of Neighbouring Cell Broadcasted in
SIB12................................................................................................2-3526
2.116.16 Temporary_offset1 in SIB12............................................................2-3529
2.116.17 White List Cell Indicator for ANR .....................................................2-3530
2.116.18 Black List Cell Indicator for ANR .....................................................2-3531
LXXXI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.117 EUTRAN Neighbouring Cell(UEUtranRelation) ............................................2-3533

2.117.1 EUTRAN Neighbouring Cell Object ID...............................................2-3533
2.117.2 Used External EUTRAN Cell TDD.....................................................2-3534
2.117.3 Used External EUTRAN Cell FDD.....................................................2-3535
2.118 Cell Selection and Reselection Information(UCelSel) ...................................2-3536
2.118.1 Cell Selection and Reselection Information Object ID .........................2-3536
2.118.2 Broadcast in either SIB3 or SIB4.......................................................2-3537
2.118.3 Measurement Quantity for Cell Selection and Reselection ..................2-3539
2.118.4 Sintrasearch Configuration Tag .........................................................2-3540
2.118.5 Intra-Frequency Measurement Trigger Threshold for Cell Reselection
(Sintrasearch) ....................................................................................2-3542
2.118.6 Sintersearch Configuration Tag .........................................................2-3543
2.118.7 Inter-Frequency Measurement Trigger Threshold for Cell Reselection
(Sintersearch) ....................................................................................2-3545
2.118.8 SsearchHCS Configuration Tag ........................................................2-3547
2.118.9 Measurement Trigger Threshold for HCS Cell Reselection
(SsearchHCS) ...................................................................................2-3548
2.118.10 Inter-System Information Configuration Tag .....................................2-3549
2.118.11 Inter-System Measurement Trigger Threshold for Cell Reselection
(Ssearch, RAT) ..................................................................................2-3551
2.118.12 SHCS, RAT Configuration Tag ........................................................2-3552
2.118.13 Inter-System Measurement Trigger Threshold for HCS Cell
Reselection (SHCS, RAT)...................................................................2-3554
2.118.14 High HCS Priority Inter-system Cell Measurement Threshold for Cell
Reselection (Slimit, SearchRAT) .........................................................2-3555
2.118.15 Qqualmin-offset Present .................................................................2-3557
2.118.16 Qqualmin-offset .............................................................................2-3559
2.118.17 Qrxlevmin-Offset Present ...............................................................2-3560
2.118.18 Qrxlevmin-offset.............................................................................2-3561
2.118.19 Reselection Hysteresis 1 of Serving Cell (QHyst1s)..........................2-3563
2.118.20 Reselection Hysteresis 1 of Serving Cell for UE in CELL_PCH or
URA_PCH State (QHyst1s, PCH) .......................................................2-3564
2.118.21 Reselection Hysteresis 1 of Serving Cell for UE in CELL_FACH State
(QHyst1s, FACH) ...............................................................................2-3566
2.118.22 Reselection Hysteresis 2 of Serving Cell (QHyst2s s) .......................2-3567
2.118.23 Reselection Hysteresis 2 of Serving Cell for UE in CELL_PCH or
URA_PCH State (QHyst2s, PCH) .......................................................2-3569
2.118.24 Reselection Hysteresis 2 of Serving Cell for UE in CELL_FACH State
(Qhyst2s, FACH)................................................................................2-3571
LXXXII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.118.25 Cell Reselection Timer Value (Treselections) ...................................2-3572

2.118.26 Cell Reselection Timer Value for UE in CELL_PCH or URA_PCH
State (Treselections, PCH) .................................................................2-3574
2.118.27 Cell Reselection Timer Value for UE in CELL_FACH State
(Treselections, FACH) ........................................................................2-3575
2.118.28 Speed Dependent Scaling Factor for Treselection Configuration
Tag ...................................................................................................2-3577
2.118.29 Speed Dependent Scaling Factor for Treselection ............................2-3578
2.118.30 Inter-frequency Scaling Factor for Treselection Configuration Tag ......2-3580
2.118.31 Inter-frequency Scaling Factor for Treselection ................................2-3581
2.118.32 Inter-RAT Scaling Factor for Treselection Configuration Tag..............2-3583
2.118.33 Inter-RAT Scaling Factor for Treselection.........................................2-3584
2.118.34 Duration for Evaluating Allowed Amount of Cell Reselection (s) in
Case of Non-HCS Usage (Non-HCS_TCRmax) ...................................2-3586
2.118.35 Maximum Number of Cell Reselections in Case of Non-HCS Usage
(Non-HCS_NCR) ...............................................................................2-3587
2.118.36 Additional Time Period Before the UE Can Revert to
Low-Mobility Measurements in Case of Non-HCS Usage
(Non-HCS_TCRmaxHyst)...................................................................2-3589
2.118.37 HCS Serving Cell Information Configuration Tag .............................2-3590
2.118.38 Duration for Evaluating Allowed Amount of Cell Reselection (s)
(TCRmax) .........................................................................................2-3592
2.118.39 Maximum Number of Cell Reselections in Case of HCS Usage
(NCR) ...............................................................................................2-3593
2.118.40 Additional Time Period Before the UE Can Exit High-mobility in Case
of HCS Usage (TCrMaxHyst) ..............................................................2-3594
2.118.41 Cell Barred Indicator ......................................................................2-3596
2.118.42 Intra-frequency Cell Reselection Indicator........................................2-3597
2.118.43 Cell Barred Time (Tbarred) .............................................................2-3598
2.118.44 Cell Reservation Extension.............................................................2-3600
2.118.45 Access Class N Barred Indicator (N=0..15) ......................................2-3601
2.118.46 GSM Scaling Factor for Treselection ...............................................2-3603
2.118.47 E-UTRA Scaling Factor for Treselection ..........................................2-3604
2.118.48 Inter-Frequency Measurement Trigger Threshold for Cell Random
Reselection (Sintersearch) in Camping Strategy Switch........................2-3606
2.118.49 Measurement Trigger Threshold for HCS Cell Random Reselection
(SsearchHCS) in Camping Strategy Switch .........................................2-3607
2.119 Hspa Configuration In A Cell(UCHspa)........................................................2-3609
2.119.1 Hspa Configuration In A Cell Object ID..............................................2-3609
LXXXIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.119.2 Number of HS-PDSCH ....................................................................2-3610

2.119.3 Minimum Number of HS-PDSCH .....................................................2-3612
2.119.4 Maximum Number of HS-PDSCH ....................................................2-3613
2.119.5 Number of E-AGCH ........................................................................2-3615
2.119.6 Number of E-RGCH/E-HICH ............................................................2-3616
2.119.7 Co-NodeB HS-PDSCH Code Sharing Indicator .................................2-3617
2.119.8 Number of HS-SCCH ......................................................................2-3619
2.119.9 HS-PDSCH Bit Rate ........................................................................2-3620
2.119.10 HSPA Total Downlink Power ..........................................................2-3622
2.119.11 Minimum HSPA Total Downlink Power ............................................2-3623
2.119.12 Maximum HSPA Total Downlink Power ...........................................2-3625
2.119.13 Target Non-serving E-DCH to Total E-DCH Power Ratio ..................2-3627
2.119.14 Maximum Target Received Total Wideband Power ..........................2-3628
2.119.15 Used Limiting HSDPA GBR Resource Consumption Profile ..............2-3630
2.119.16 SF512 Number to Increase HS-PDSCH Number..............................2-3631
2.119.17 SF512 Number to Decrease HS-PDSCH Number ............................2-3633
2.119.18 Switch for DRNC Code Re-Assignment Radio Link Release .............2-3634
2.119.19 E-AGCH Multiplexing Switch in Dedicated and Common E-DCH.......2-3636
2.119.20 Maximum Number of Users with Traffic on Common E-DCH in
Enhanced Uplink CELL_FACH State ...................................................2-3638
2.119.21 HS-PDSCH Code NodeB Assignment Support Indicator...................2-3639
2.119.22 Maximal Scheduled E-DCH User Number in CELL_DCH state
Scheduled Per E-AGCH .....................................................................2-3641
2.119.23 Switch to Increase the HSUPA Control Channel Number by
Congestion ........................................................................................2-3642
2.119.24 Maximum E-AGCH Number for Dedicated E-DCH Users..................2-3644
2.119.25 Maximum E-RGCH/HICH Number for Dedicated E-DCH Users.........2-3645
2.119.26 User Number Threshold to Increase E-AGCH Number .....................2-3647
2.119.27 User Number Threshold to Decrease E-AGCH Number....................2-3648
2.119.28 User Number Threshold to Increase E-RGCH/HICH Number ............2-3650
2.119.29 User Number Threshold to Decrease E-RGCH/HICH Number ..........2-3652
2.119.30 HSDPA Vs R99 Code Priority Indicator............................................2-3653
2.119.31 Number of PCCH transmissions......................................................2-3655
2.119.32 Enhanced PCH HS-PDSCH Power .................................................2-3656
2.119.33 Enhanced PCH HS-SCCH Power ...................................................2-3658
2.119.34 Indicator of Congestion Control of HSUPA vs R99 Fairness of cell ......2-3659
2.119.35 The upper limit of Maximum Target RTWP for RoT Adjustment
Dynamically .......................................................................................2-3661
LXXXIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.119.36 The lower limit of Maximum Target RTWP for RoT Adjustment
Dynamically .......................................................................................2-3662
2.119.37 The Switch of Uplink PS Downgrade for HSDPA User Triggered by
HSUPA Unhappy ...............................................................................2-3664
2.119.38 The Offset of the RoT Used for the Macro Small Cell Load
Balancing ..........................................................................................2-3665
2.120 MBMS Configuration In A Cell(UCMbms) ....................................................2-3667
2.120.1 MBMS Configuration In A Cell Object ID ...........................................2-3667
2.120.2 Additional Offset to Cells Belonging to the MBMS Preferred Frequency
Layer When Judging the Cell-Ranking Criterion R of Cell Reselection
for the Non-HCS Cell (Qoffmbms) .......................................................2-3668
2.120.3 Offset to the Normal HCS Priority Level Used for Cells Belonging to
the MBMS Preferred Frequency Layer When UE is in Low Mobility State
(HCS_OFFmbms) ..............................................................................2-3669
2.120.4 MBMS S-CCPCH Reserved Number (Step: S-CCPCH of 64kbps) ......2-3671
2.120.5 MBMS Traffic Number Limit..............................................................2-3672
2.120.6 MBMS Throughput Threshold...........................................................2-3673
2.120.7 Cell Counting Switch........................................................................2-3675
2.120.8 Time of Arrival Window Startpoint .....................................................2-3676
2.120.9 Time of Arrival Window Endpoint ......................................................2-3677
2.121 MBMS Service Area Configuration(UMbmsSa) ............................................2-3679
2.121.1 MBMS Service Area Configuration Object ID ....................................2-3679
2.121.2 MBMS Service Area Code................................................................2-3680
2.122 MBMS Preferred Frequency Layer Configuration(UMbmsPLFreq) ................2-3682
2.122.1 MBMS Preferred Frequency Layer Configuration Object ID ................2-3682
2.122.2 Frequency Band Indicator of the Cells in the MBMS Service Area.......2-3683
2.122.3 DUARFCN of the Cells in the MBMS Service Area.............................2-3685
2.122.4 Cell Number of a Frequency Layer in a MBMS SAC ..........................2-3687
2.122.5 Used Logic Cell ...............................................................................2-3688
2.123 MBMS Non Preferred Frequency Layer Configuration(UMbmsNPLFreq) .......2-3690
2.123.1 MBMS Non Preferred Frequency Layer Object ID..............................2-3690
2.123.2 Frequency Band Indicator of the Cells in the MBMS Service Area.......2-3691
2.123.3 DUARFCN of the Cells in the MBMS Service Area.............................2-3693
2.123.4 Cell Number of a Frequency Layer in a MBMS SAC ..........................2-3695
2.123.5 Used Logic Cell ...............................................................................2-3697
2.124 EFACH Configuration(UEFach) ..................................................................2-3698
2.124.1 EFACH Object ID ............................................................................2-3698
2.124.2 UL Interference for Common E-DCH Configured in SIB5/5bis
Indicator ............................................................................................2-3699
LXXXV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.124.3 Power Offset between the Last Preamble and the Initial Power of the
DPCCH in Enhanced Uplink CELL_FACH State...................................2-3701
2.124.4 Additional E-DCH Transmission Back Off for Common E-DCH ...........2-3702
2.124.5 Common E-DCH Resources Number................................................2-3704
2.124.6 Maximum Common E-DCH Resource Allocation Time for CCCH ........2-3705
2.124.7 E-DCH Transmission Continuation Back Off ......................................2-3707
2.124.8 Maximum Period for Collision Resolution Phase for Common
E-DCH ..............................................................................................2-3708
2.124.9 Uplink Inner Loop Power Control Algorithm in Uplink Enhanced
CELL_FACH State .............................................................................2-3710
2.124.10 Step Size of Uplink Inner Loop Power Control in Uplink Enhanced
CELL_FACH State ............................................................................. 2-3711
2.124.11 HS-PDSCH Measurement Power Offset (UL Enhanced
CELL_FACH).....................................................................................2-3713
2.124.12 Maximum Bit Rate for Common E-DCH User...................................2-3714
2.124.13 SIR Target for Common E-DCH ......................................................2-3716
2.124.14 Initial F-DPCH Power in Uplink Enhanced CELL_FACH State...........2-3717
2.124.15 Allowed UL Common MAC Flow Transport Bandwidth for the
Cell ...................................................................................................2-3719
2.124.16 ACK/NACK/CQI Support on HS-DPCCH Indicator in UL Enhanced
CELL_FACH State .............................................................................2-3720
2.125 SCCPCH Configuration(USccpch) ..............................................................2-3721
2.125.1 SCCPCH Configuration Object ID.....................................................2-3721
2.125.2 S-CCPCH Common Physical Channel ID .........................................2-3723
2.125.3 SCCPCH Usage .............................................................................2-3724
2.125.4 Maximum FACH Power ...................................................................2-3726
2.125.5 Frame Timing Offset Between SCCPCH and PCCPCH .....................2-3727
2.125.6 S-CCPCH TFCI Field Power Offset ..................................................2-3729
2.125.7 S-CCPCH Pilot Field Power Offset ...................................................2-3730
2.126 PRACH Configuration(UPrach)...................................................................2-3732
2.126.1 PRACH Configuration Object ID .......................................................2-3732
2.126.2 PRACH Common Physical Channel ID ............................................2-3733
2.126.3 Type of PRACH Preamble................................................................2-3734
2.126.4 RACH TTI ......................................................................................2-3736
2.126.5 Available Signature .........................................................................2-3737
2.126.6 PRACH Available Subchannel Number ............................................2-3739
2.126.7 PRACH Preamble Scrambling Code ................................................2-3740
2.126.8 Permitted Maximum Access Service Class .......................................2-3742
2.126.9 Available Signature Begin Index ......................................................2-3743
LXXXVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.126.10 Available Signature End Index .......................................................2-3745

2.126.11 Assigned Subchannel No. .............................................................2-3746
2.126.12 Persistence Scaling Factor Number ...............................................2-3748
2.126.13 Persistence Scaling Factor ............................................................2-3749
2.126.14 AC-to-ASC Mapping .....................................................................2-3751
2.126.15 Initial Dynamic Persistence Level ...................................................2-3752
2.126.16 Maximum Number of Preamble Ramping Cycles ............................2-3753
2.126.17 Detected Preamble Threshold .......................................................2-3755
2.126.18 PRACH Initiation Tx Power Constant Value ....................................2-3756
2.126.19 PRACH Preamble Power Ramp Step .............................................2-3758
2.126.20 Maximum Number of Preamble Being Transmitted ..........................2-3759
2.126.21 RACH Common Transport Channel ID ............................................2-3761
2.126.22 Optimized PRACH Initiation Tx Power Constant Value for RACH
Self-Optimization Function..................................................................2-3762
2.126.23 Maximum Number of Preamble Being Transmitted for RACH
2.126.24 PRACH Preamble Power Ramp Step for RACH Self-Optimization
Function ............................................................................................2-3765
2.127 AICH Configuration(UAich).........................................................................2-3766
2.127.1 AICH Configuration Object ID ...........................................................2-3766
2.127.2 AICH Common Physical Channel ID .................................................2-3767
2.127.3 AICH Transmission Timing ...............................................................2-3768
2.128 MICH Configuration(UMich) .......................................................................2-3770
2.128.1 MICH Configuration Object ID ..........................................................2-3770
2.128.2 MICH Common Physical Channel ID.................................................2-3771
2.128.3 Number of NI per Frame ..................................................................2-3772
2.128.4 MICH Power....................................................................................2-3774
2.129 Load Control Information(ULdCtrl) ..............................................................2-3775
2.129.1 Load Control Information Object ID ...................................................2-3775
2.129.2 Maximum Number of UE Decreasing Rate When Congestion.............2-3776
2.129.3 Switch for Shielding GBR Reduction Shared by Uplink and
Downlink ...........................................................................................2-3778
2.129.4 Maximum Number of Services Whose GBR Can Be Decreased in
Load Control Every Time Shared by Uplink and Downlink .....................2-3780
2.129.5 Switch of Rate Downgrade ahead of Preemption in Congestion..........2-3781
2.129.6 The Switch of Forced Handover for Online Users in Congestion .........2-3783
2.129.7 The Switch of Forced Call Drop for Online Users in Congestion..........2-3784
LXXXVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.129.8 The Switch of Forced RAB to FACH of the online I/B users in
Congestion ........................................................................................2-3786
2.129.9 Uplink Serious Overload Threshold...................................................2-3787
2.129.10 Uplink Common Overload Threshold...............................................2-3789
2.129.11 Threshold for Releasing from Uplink Overload .................................2-3790
2.129.12 Uplink Switch for Shielding Rate Reduction .....................................2-3792
2.129.13 Uplink Switch for Shielding Forced Handover ..................................2-3793
2.129.14 Uplink Switch for Shielding Forced Drop..........................................2-3795
2.129.15 Maximum Number of Degraded Uplink Load Steps Every Time ........2-3796
2.129.16 Maximum Number of Uplink Forced Handover Users Every Time ......2-3798
2.129.17 Maximum Number of Uplink Forced Drop Users Every Time.............2-3799
2.129.18 Downlink Serious Overload Threshold.............................................2-3801
2.129.19 Downlink Common Overload Threshold ..........................................2-3802
2.129.20 Threshold for Releasing from Downlink Overload.............................2-3804
2.129.21 Downlink Switch for Shielding Rate Reduction .................................2-3805
2.129.22 Downlink Switch for Shielding Forced Handover ..............................2-3807
2.129.23 Downlink Switch for Shielding Forced Drop .....................................2-3808
2.129.24 Maximum Number of Degraded Downlink Load Steps Every
Time..................................................................................................2-3810
2.129.25 Maximum Number of Downlink Forced Handover Users or Deleted
Radio Links Every Time...................................................................... 2-3811
2.129.26 Maximum Number of Downlink Forced Drop Users Every Time ........2-3813
2.129.27 Maximum FACH Power Adjustment Switch for MBMS Downlink Load
Control ..............................................................................................2-3815
2.129.28 Common Overload Threshold for HS-DSCH ....................................2-3816
2.129.29 Threshold for Releasing from HS-DSCH Overload ...........................2-3818
2.129.30 Switch of Interactive Class/Background Class RAB->FACH for
Overload ...........................................................................................2-3819
2.129.31 Maximum Users of Interactive Class/Background Class RAB->FACH
for Overload ......................................................................................2-3821
2.129.32 Algorithm of Load Decreasing.........................................................2-3823
2.129.33 Switch of Transferring Online HS-DSCH or E-DCH I/B Users to
CELL_FACH due to the User Number Limitation when Attempting to
Transfer to HS-DSCH or E-DCH during DRBC.....................................2-3824
2.129.34 Uplink Switch for Shielding E-TTI Switching.....................................2-3826
2.129.35 Maximum Number of Uplink E-TTI Switching Users Every Time........2-3828
2.129.36 RTWP Load Low Threshold............................................................2-3829
2.129.37 RTWP Load Middle Threshold ........................................................2-3830
2.129.38 RTWP Load High Threshold ...........................................................2-3832
LXXXVIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.129.39 TCP Load Low Threshold...............................................................2-3833

2.129.40 TCP Load Middle Threshold ...........................................................2-3835
2.129.41 TCP Load High Threshold ..............................................................2-3836
2.129.42 Code Load Low Threshold .............................................................2-3837
2.129.43 Code Load Middle Threshold..........................................................2-3839
2.129.44 CE Load Low Threshold.................................................................2-3840
2.129.45 CE Load Middle Threshold .............................................................2-3842
2.129.46 HSDPA User Number Low Threshold..............................................2-3843
2.129.47 HSDPA User Number Middle Threshold ..........................................2-3844
2.129.48 HSUPA User Number Low Threshold..............................................2-3846
2.129.49 HSUPA User Number Middle Threshold ..........................................2-3847
2.129.50 MBMS User Number Low Threshold ...............................................2-3849
2.129.51 MBMS User Number Middle Threshold ...........................................2-3850
2.129.52 Signal User Number Low Threshold................................................2-3852
2.129.53 Signal User Number Middle Threshold ............................................2-3853
2.129.54 The Switch of PS Load Control on Cell Level...................................2-3855
2.129.55 Downlink Load Threshold for PS Load Control.................................2-3856
2.129.56 Downlink Load Threshold for Releasing from PS Load Control .........2-3858
2.129.57 Uplink Load Threshold for PS Load Control .....................................2-3859
2.129.58 Uplink Load Threshold for Releasing from PS Load Control..............2-3861
2.129.59 Switch of PS Domain DSAR for PS Load Control .............................2-3862
2.129.60 Maximum Number of EDCH User Migration from EDCH to Uplink
DCH Every Time ................................................................................2-3864
2.129.61 The Switch of EDCH User to Uplink DCH in the Status of Uplink PS
Load Control on Cell Level..................................................................2-3865
2.129.62 EDCH User Number High Load Threshold.......................................2-3866
2.130 SCPICH Configuration(UScpich) ................................................................2-3868
2.130.1 SCPICH Configuration Object ID ......................................................2-3868
2.130.2 S-CPICH Common Physical Channel ID ...........................................2-3869
2.130.3 S-CPICH Power ..............................................................................2-3870
2.130.4 MIMO S-CPICH Power ....................................................................2-3872
2.131 EFachPch Configuration(UEFachPch) ........................................................2-3873
2.131.1 EFachPch Configuration Object ID ...................................................2-3873
2.131.2 Channel Type Indicator for Enhanced FACH/PCH Priority Queue .......2-3874
2.131.3 Discard Timer..................................................................................2-3876
2.131.4 Re-ordering Release timer (T1) ........................................................2-3877
2.131.5 Reset Timer Controlling the Reset of the MAC-ehs Reordering
Functionality ......................................................................................2-3879
LXXXIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.131.6 Discard Timer Configuration Indication ..............................................2-3880

2.131.7 MAC-ehs Queue Identity ..................................................................2-3882
2.131.8 MAC-ehs Window Size ....................................................................2-3883
2.131.9 Maximum MAC-c PDU Size for Flexible RLC PDU.............................2-3884
2.131.10 Maximum MAC-c PDU Size for Fixed RLC PDU ..............................2-3886
2.131.11 Scheduling Priority Indicator for Enhanced FACH/PCH Priority
Queue...............................................................................................2-3887
2.132 Service Function(USrvFunction) .................................................................2-3889
2.132.1 Service Function Object ID...............................................................2-3889
2.133 Service Basic Configuration(USubSrv) ........................................................2-3890
2.133.1 Service Basic Configuration Object ID...............................................2-3890
2.133.2 Sub-Service ....................................................................................2-3891
2.133.3 Service Indicator..............................................................................2-3893
2.133.4 Minimum Bit Rate ............................................................................2-3895
2.133.5 Maximum Bit Rate ...........................................................................2-3896
2.133.6 Direction .........................................................................................2-3898
2.133.7 CN Domain Indicator .......................................................................2-3900
2.133.8 Traffic Class ....................................................................................2-3901
2.133.9 P-T-M RB Release Permission .........................................................2-3903
2.133.10 Used UE DTX/DRX Profile .............................................................2-3905
2.133.11 Maximum Number of Retransmissions for E-DCH ............................2-3906
2.133.12 Uplink DCH or non-Scheduling E-DCH Traffic Eb/N0 used in
Uplink Equivalent AMR User Number Calculation Algorithm for Power
Control ..............................................................................................2-3908
2.133.13 Scheduling E-DCH Traffic Eb/N0 used in Uplink Equivalent AMR
User Number Calculation Algorithm for Power Control..........................2-3910
2.133.14 Used E-DCH in CELL_DCH State Profile ........................................ 2-3911
2.133.15 E-DCH Transmission Time Interval .................................................2-3913
2.133.16 E-DPDCH Power Offset Relative to the Combined Power of DPCCH
and E-DPCCH for 16QAM (Delta T2TP) ..............................................2-3914
2.133.17 E-DPDCH Power Offset Relative to the Combined Power of DPCCH
and E-DPCCH for QPSK (Delta T2TP) ................................................2-3916
2.133.18 Configuration Indication of RLC Reordering Timer for Multiflow
HSDPA .............................................................................................2-3918
2.133.19 RLC Reordering Timer for Multiflow HSDPA ....................................2-3919
2.134 UE Internal Measurement Profile(UUeIntMeasProfile) ..................................2-3921
2.134.1 UE Internal Measurement Profile Object ID .......................................2-3921
2.134.2 Profile Id .........................................................................................2-3922
XC
SJ-20141209142030-013|2015-11-12 (R1.3)
2.135 UE Transmitted Power Event Measurement Configuration for

AMR(UAmrEvtTPUeInt) ...............................................................................2-3924
2.135.1 UE Transmitted Power Event Measurement Configuration for AMR
Object ID ...........................................................................................2-3924
2.135.2 Measurement Report Transfer Mode.................................................2-3925
2.135.3 Filter Coefficient ..............................................................................2-3927
2.135.4 Maximum Event Number of UE Internal Measurement .......................2-3928
2.135.5 UE Internal Measurement Event Identity ...........................................2-3930
2.135.6 Time to Trigger ................................................................................2-3931
2.135.7 UE Transmitted Power Threshold .....................................................2-3933
PS(UPsEvtTPUeInt) ....................................................................................2-3934
2.136.1 UE Transmitted Power Event Measurement Configuration for PS
Object ID ...........................................................................................2-3934
2.136.6 Time to Trigger ................................................................................2-3941
Handover(UHoEvtTPUeInt) ..........................................................................2-3944
2.137.1 UE Transmitted Power Event Measurement Configuration for
Handover Object ID............................................................................2-3944
2.137.6 Time to Trigger ................................................................................2-3952
2.138 UE Rx-Tx Time Difference Period Measurement Configuration for
Location(UPrdRttUeInt)................................................................................2-3955
2.138.1 UE Rx-Tx Time Difference Period Measurement Configuration for
Location Object ID .............................................................................2-3955
2.138.5 Reporting Interval ............................................................................2-3961
XCI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.139 UE Rx-Tx Time Difference Event Measurement Configuration for

UTRAN(UEvtRttUeInt) .................................................................................2-3962
2.139.1 UE Rx-Tx Time Difference Event Measurement Configuration for
UTRAN Object ID...............................................................................2-3962
2.139.6 Time to Trigger ................................................................................2-3969
2.139.7 UE Rx-Tx Time Difference Threshold ................................................2-3971
2.140 UE Rx-Tx Time Difference Event Measurement Configuration for RL Timing
Adjustment(URlEvtRttUeInt) .........................................................................2-3972
2.140.1 UE Rx-Tx Time Difference Event Measurement Configuration for RL
Timing Adjustment Object ID...............................................................2-3972
2.140.6 Time to Trigger ................................................................................2-3980
2.140.7 UE Rx-Tx Time Difference Threshold ................................................2-3981
2.141 UE Transmitted Power Event Report for Power Limitation Judgement
(UPwrLimTPUeInt) ......................................................................................2-3983
2.141.1 UE Transmitted Power Event Report Object ID for Power Limitation
Judgment ..........................................................................................2-3983
2.141.6 Time to Trigger ................................................................................2-3990
2.142 Cell Reselection Frequency and Priority Information(UPriSel).......................2-3993
2.142.1 Cell Reselection Frequency and Priority Information Object ID ...........2-3993
2.142.2 Absolute Priority of Serving Cell for Cell Reselection..........................2-3995
2.142.3 CPICH RSCP Measurement Trigger Threshold for Absolute Priority
Reselection Criteria (Sprioritysearch1).................................................2-3996
2.142.4 CPICH EcN0 Measurement Trigger Threshold for Absolute Priority
Reselection Criteria (Sprioritysearch2).................................................2-3997
2.142.5 Serving Cell Reselection Threshold for Absolute Priority Reselection
Criteria ..............................................................................................2-3999
XCII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.142.6 Serving Cell Reselection Threshold 2 for Absolute Priority Reselection

Criteria (Threshserving, low2) .............................................................2-4000
2.142.7 Number of UTRAN Centre Frequencies ............................................2-4002
2.142.8 Downlink UTRAN Absolute Radio Frequency Channel Number ..........2-4003
2.142.9 Absolute Priority of Inter-Frequency Layers in UTRAN .......................2-4004
2.142.10 Reselection Threshold for Inter-Frequency Layers of High Priority in
UTRAN .............................................................................................2-4006
2.142.11 Reselection Threshold for Inter-Frequency Layers of Low Priority in
UTRAN .............................................................................................2-4007
2.142.12 Qqualmin of UTRAN for Cell Reselection ........................................2-4009
2.142.13 Qrxlevmin of UTRAN for Cell Reselection........................................2-4010
2.142.14 Number of GSM Frequency Groups ................................................2-4012
2.142.15 Gsm Band Indicator .......................................................................2-4013
2.142.16 GSM Starting ARFCN ....................................................................2-4014
2.142.17 Absolute Priority of Inter-RAT Layers in GERAN ..............................2-4015
2.142.18 Qrxlevmin of GSM for Cell Reselection............................................2-4017
2.142.19 Reselection Threshold for Inter-RAT Layers of High Priority in
GERAN .............................................................................................2-4018
2.142.20 Reselection Threshold for Inter-RAT Layers of Low Priority in
GERAN .............................................................................................2-4020
2.142.21 Number of EUTRAN Centre Frequencies ........................................2-4021
2.142.22 Downlink EUTRAN Absolute Radio Frequency Channel Number ......2-4022
2.142.23 Absolute Priority of Inter-RAT Layers in EUTRAN ............................2-4024
2.142.24 EUTRAN Allowed Measurement Bandwidth ....................................2-4025
2.142.25 Reselection Threshold for Inter-RAT Layers of High Priority in
EUTRAN ...........................................................................................2-4027
2.142.26 Reselection Threshold 2 for Inter-RAT Layers of High Priority in
EUTRAN (Threshx, high2) ..................................................................2-4028
2.142.27 Reselection Threshold for Inter-RAT Layers of Low Priority in
EUTRAN ...........................................................................................2-4030
2.142.28 Reselection Threshold 2 for Inter-Rat Layers of Low Priority in
EUTRAN (Threshx, low2) ...................................................................2-4031
2.142.29 Qrxlevmin of EUTRAN for Cell Reselection .....................................2-4033
2.142.30 Qqualmin of EUTRAN for Cell Reselection ......................................2-4034
2.142.31 Threshold of RSRQ indicator ..........................................................2-4036
2.142.32 E-UTRA Detection Indicator ...........................................................2-4037
2.142.33 Wider Bandwith RSRQ Measurement related Qqualmin of EUTRAN
for Cell Reselection ............................................................................2-4038
2.143 Load Balance Information(UPlBal) ..............................................................2-4040
XCIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.143.1 Load Balance Information Object ID..................................................2-4040

2.143.2 Load Balance Switch of Initial RRC Procedure ..................................2-4041
2.143.3 Load Balance Switch of RAB Assignment Procedure .........................2-4042
2.143.4 Load Balance Switch of Call Holding Procedure ................................2-4044
2.143.5 Service Balance Switch of Initial RRC Procedure...............................2-4045
2.143.6 Service Balance Switch of RAB Assignment Procedure .....................2-4047
2.143.7 Service Balance Switch of Call Holding Procedure.............................2-4048
2.143.8 Load Balance Switch for Downlink Power..........................................2-4050
2.143.9 Downlink Power Weight for Load Balance .........................................2-4051
2.143.10 Permitted Payload Difference Downlink Available Load Threshold in
Inter-frequency Cells (Power) .............................................................2-4052
2.143.11 Load Balance Switch for Uplink Interference ....................................2-4054
2.143.12 Uplink Interference Weight for Load Balance ...................................2-4055
2.143.13 Permitted Payload Difference Uplink Available Load Threshold in
Inter-frequency Cells (Interference) .....................................................2-4057
2.143.14 Load Balance Switch for Code........................................................2-4058
2.143.15 Code Weight for Load Balance .......................................................2-4059
Inter-frequency Cells (Code) ...............................................................2-4061
2.143.17 CS Balance Switch of RAB Assignment Procedure ..........................2-4062
Inter-frequency Cells (HSDPA Throughput)..........................................2-4064
2.143.19 Permitted Payload Difference Available Load Threshold in
Inter-frequency Cells (HSUPA Throughput)..........................................2-4065
2.143.20 Load Balance Switch for HSDPA Throughput ..................................2-4066
2.143.21 Load Balance Switch for CE ...........................................................2-4068
2.143.22 Load Balance Switch for Bandwidth ................................................2-4069
2.143.23 HSDPA Throughput Weight for Load Balance ..................................2-4071
2.143.24 HSUPA Throughput Weight for Load Balance ..................................2-4072
2.143.25 UTRAN Downlink Available Load Balance Threshold (Code) for
CS ....................................................................................................2-4073
2.143.26 UTRAN Downlink Available Load Balance Threshold (Code) for R99
PS ....................................................................................................2-4075
2.143.27 UTRAN Downlink Available Load Balance Threshold (Power) for
CS ....................................................................................................2-4076
2.143.28 Inter-RAT Downlink Available Load Balance Threshold (Power) for
CS ....................................................................................................2-4078
2.143.29 UTRAN Downlink Available Load Balance Threshold (Power) for R99
PS ....................................................................................................2-4079
XCIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.143.30 UTRAN Uplink Available Load Balance Threshold (Interference) for

CS ....................................................................................................2-4081
2.143.31 Inter-RAT Uplink Available Load Balance Threshold (Interference) for
CS ....................................................................................................2-4082
2.143.32 UTRAN Uplink Available Load Balance Threshold (Interference) for
R99 PS .............................................................................................2-4084
2.143.33 UTRAN Downlink Available Load Balance Threshold
(HSDPAThroughput) for HSDPA..........................................................2-4085
2.143.34 UTRAN Uplink Available Load Balance Threshold (HSUPA
Throughput) for HSUPA......................................................................2-4087
2.143.35 CS balance switch if PS release first for CS+PS Multi-Carrier
Scenario............................................................................................2-4088
2.143.36 User Number Offset of UTRAN for Balance .....................................2-4090
2.143.37 User Number Offset of GSM in Multi-Mode System for Balance ........2-4091
2.143.38 User Number Offset of GSM for Balance .........................................2-4092
2.143.39 GSM Cell's Carrier Number ............................................................2-4094
2.143.40 Dual Carrier Balance Switch of Initial RRC Procedure ......................2-4095
2.143.41 Switch of HSDPA Load Balance for Signalling on DCH in RRC
Connection Procedure........................................................................2-4096
2.143.42 HSPA+ Capability Indicator.............................................................2-4098
2.143.43 HSPA+ Balance Switch of RAB Assignment Procedure ....................2-4099
2.143.44 HSPA+ Balance Switch of Call Holding Procedure ...........................2-4101
2.143.45 HSPA+ Capacity Priority.................................................................2-4103
2.143.46 Cpich RSCP Threshold for Dual Carrier HSDPA Balance .................2-4104
2.143.47 Cpich EcNo Threshold for Dual Carrier HSDPA Balance ..................2-4106
2.143.48 Cpich RSCP Threshold for Directed Retry Triggered by Inter-RAT
Balancing ..........................................................................................2-4107
2.143.49 Cpich Ec/No Threshold for Directed Retry Triggered by Inter-RAT
Balancing ..........................................................................................2-4108
2.143.50 Code Factor in HSDPA Throughput Load Balance ........................... 2-4110
2.143.51 Power Factor in HSDPA Throughput Load Balance.......................... 2-4111
2.143.52 Factor Choice in HSDPA Throughput Load Balance (Bandwidth) ...... 2-4112
2.143.53 Load Balance Switch for HSUPA Throughput .................................. 2-4114
2.143.54 Load Balance Strategy for HSPA Service ........................................ 2-4115
2.143.55 Load Balance Switch for HSDPA User Number................................ 2-4116
2.143.56 UTRAN Downlink Available Load Balance Threshold (HSDPA User
Number) for HSPA ............................................................................ 2-4118
Inter-frequency Cells (HSDPA User Number) ....................................... 2-4119
XCV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.143.58 UTRAN to EUTRAN balance switch ................................................2-4121

2.143.59 Load Balance Switch of Handover and Call Reestablishment
Procedure .........................................................................................2-4122
2.143.60 Service Balance Switch of Handover and Call Reestablishment
Procedure .........................................................................................2-4124
2.143.61 HSPA+ Balance Switch of Handover and Call Reestablishment
Procedure .........................................................................................2-4125
2.143.62 PS+CS Balance Switch..................................................................2-4127
2.143.63 RRC Balance Strategy with Cause "Low Priority" in RRC Connection
Request ............................................................................................2-4128
2.143.64 Inter-RAT Downlink Available Load Balance Threshold (Code) for
CS ....................................................................................................2-4130
2.143.65 Directed Retry Without Load Comparison Switch .............................2-4131
2.143.66 Threshold of the Number of FACH UEs Used for FACH Load
Balance.............................................................................................2-4133
2.143.67 Threshold of CPICH Ec/N0 in the Current Cell Used for Balance
Based on the Intra-frequency Measurement Reported in RRC
CONNECTION REQUEST .................................................................2-4134
2.143.68 Threshold of CPICH Ec/N0 in the Best Neighbour Cell Used for
Balance Based on the Intra-frequency Measurement Reported in RRC
CONNECTION REQUEST .................................................................2-4136
2.143.69 Load Balance Optimization Switch for HSDPA User Number ............2-4137
2.144 MR Configuration(UMR).............................................................................2-4139
2.144.1 MR Configuration Object ID..............................................................2-4139
2.144.2 MR-UE Periodical Intra-frequency Measurement Switch.....................2-4140
2.144.3 MR-UE Periodical Internal Measurement Switch ................................2-4142
2.144.4 MR-UE Periodical Quality Measurement Switch.................................2-4143
2.144.5 MR-UE Periodical Location Measurement Switch ..............................2-4144
2.144.6 MR-UE Initial Call Measurement Switch ............................................2-4146
2.144.7 MR-UE Event Intra/Inter-frequency and Inter-rat Measurement
Switch ...............................................................................................2-4147
2.144.8 MR-UE Event Internal Measurement Switch ......................................2-4148
2.144.9 MR-UE Event Quality Measurement Switch.......................................2-4150
2.144.10 MR-UE Event Traffic Volume Measurement Switch ..........................2-4151
2.144.11 MR-UE Rnlu Periodical Quality Measurement Type Switch ...............2-4152
2.144.12 MR-UE Periodical Inter-freq Measurement Switch............................2-4153
2.144.13 MR-UE Periodical Inter-rat Measurement Switch .............................2-4155
2.144.14 MR-UE Measurement Reporting Interval .........................................2-4156
2.144.15 MR-UE Measurement Report Transfer Mode ...................................2-4157
XCVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.144.16 MR-UE Location Measurement Reporting Interval............................2-4159

2.144.17 MR Overload Threshold .................................................................2-4160
2.144.18 MR-UE Measurement Report Transfer Mode of Initial Call ................2-4162
2.144.19 MR-UE Initial Call Location Measurement Mode ..............................2-4163
2.144.20 MR-UE Periodical Location Measurement Mode ..............................2-4165
2.144.21 AMR Bler Event Measurement Switch.............................................2-4166
2.144.22 AMR Bler Event Measurement Total CRC Number...........................2-4168
2.144.23 AMR Bler Event Measurement Error CRC Number ..........................2-4169
2.144.24 AMR Bler Event Measurement Pending After Trigger CRC
Number .............................................................................................2-4170
2.144.25 Non-AMR Bler Event Measurement Switch......................................2-4172
2.144.26 Non-AMR Bler Event Measurement Total CRC Number ...................2-4173
2.144.27 Non-AMR Bler Event Measurement Error CRC Number ...................2-4174
2.144.28 Non-AMR Bler Event Measurement Pending After Trigger CRC
Number .............................................................................................2-4176
2.144.29 The Switch for the EMI Function in MR............................................2-4177
2.144.30 MR-UE AGPS Periodical Location Amount of Reporting ...................2-4178
2.144.31 CS MR-UE Acquisition Ratio ..........................................................2-4180
2.144.32 PS MR-UE Acquisition Ratio...........................................................2-4181
2.144.33 MR Service Type CS Switch ...........................................................2-4183
2.144.34 MR Service Type PS Switch ...........................................................2-4184
2.144.35 MR Service Type CS and PS Switch ...............................................2-4185
2.144.36 Period MR AGPS Location Report with Assistance Data Missing
Threshold ..........................................................................................2-4187
2.144.37 Period MR AGPS Location Report with Not Enough Threshold .........2-4188
2.144.38 MR-UE RACH Measurement Switch ...............................................2-4190
2.145 Cell MR Configuration(UCMR)....................................................................2-4191
2.145.1 Cell MR Configuration Object ID .......................................................2-4191
2.145.2 MR-UE Measurement Switch ...........................................................2-4192
2.145.3 MR-CELL Measurement Switch (Received Total Wide Band
Power) ..............................................................................................2-4194
2.145.4 MR-CELL Measurement Switch (Transmitted Carrier Power)..............2-4195
2.145.5 MR-CELL Measurement Switch (Acknowledged PRACH
preambles) ........................................................................................2-4196
2.145.6 MR-CELL Measurement Switch (UTRAN GPS Timing of Cell Frames
for UE Positioning) .............................................................................2-4197
2.145.7 MR-CELL Measurement Switch (Transmitted carrier power of all codes
not used for HS-PDSCH, HS-SCCH, E-AGCH, E-RGCH or E-HICH
transmission) .....................................................................................2-4199
XCVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.145.8 MR-CELL Measurement Switch (HS-DSCH Required Power).............2-4200

2.145.9 MR-CELL Measurement Switch (HS-DSCH Provided Bit Rate)...........2-4201
2.145.10 MR-CELL Measurement Switch (E-DCH Provided Bit Rate) .............2-4202
2.145.11 MR-CELL Measurement Switch (E-DCH Non-serving Relative Grant
Down Commands) .............................................................................2-4203
2.145.12 MR-CELL Measurement Reporting Interval Coefficient.....................2-4205
2.146 CFN Offset Configuration (UCfnOffset) .......................................................2-4206
2.146.1 CFN Offset Configuration Object ID .................................................2-4206
2.146.2 Signalling Service Type....................................................................2-4207
2.146.3 Fast ReConfiguration Scene Indicator...............................................2-4209
2.146.4 Data Retransmission Rate Factor over Uu Interface...........................2-4210
2.146.5 Packet Length Type Indicator over Uu Interface................................. 2-4211
2.146.6 CFN Offset Value.............................................................................2-4213
2.147 Handover Configuration Based on Service(USrvBasedHo)...........................2-4214
2.147.1 Handover Configuration Based on Service Object ID .........................2-4214
2.147.2 Service Handover Combination Strategy ...........................................2-4215
2.147.3 Service Handover Strategy Indicator (AMR) ......................................2-4217
2.147.4 Service Handover Strategy Indicator (CS 64K) ..................................2-4219
2.147.5 Service Handover Strategy Indicator (PS RT) ....................................2-4221
2.147.6 Service Handover Strategy Indicator (PS NRT)..................................2-4222
2.147.7 Service Handover Strategy of RNC for AMR......................................2-4224
2.147.8 Service Handover Strategy of RNC for CS64.....................................2-4226
2.147.9 Service Handover Strategy of RNC for PS RT Service .......................2-4227
2.147.10 Service Handover Strategy of RNC for PS NRT Service ...................2-4229
2.148 Application Service Type Configuration (UAppSrvType) ...............................2-4230
2.148.1 Application Service Type Configuration Object ID .............................2-4230
2.148.2 Application Service Type ..................................................................2-4231
2.148.3 Traffic Class ....................................................................................2-4233
2.148.4 ARP Priority Level ...........................................................................2-4234
2.148.5 ARP Preemption Capability ..............................................................2-4236
2.148.6 ARP Preemption Vulnerability...........................................................2-4237
2.148.7 ARP Queuing Allowed Capability ......................................................2-4239
2.148.8 Basic Priority ...................................................................................2-4240
2.148.9 Maximum SDU Size.........................................................................2-4241
2.148.10 Uplink Guaranteed Bit Rate ............................................................2-4243
2.148.11 Downlink Guaranteed Bit Rate ........................................................2-4244
2.149 QChat Service Configuration (UQChat).......................................................2-4246
2.149.1 QChat Service Configuration Object ID ............................................2-4246
XCVIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.149.2 QChat DRX Cycle Length ................................................................2-4247

2.149.3 QChat DSCP Value .........................................................................2-4248
2.149.4 QChat Dormancy Timer ...................................................................2-4249
2.149.5 Max Number of QChat UE per DMP .................................................2-4251
2.149.6 Number of Released QChat UE when Over Limit...............................2-4252
2.149.7 Post-verification Period Configuration Tag for QChat Service..............2-4253
2.149.8 SRB Delay for QChat Service...........................................................2-4255
2.149.9 DPCH PC Preamble Length for QChat Service..................................2-4256
2.150 Basic Compress Mode Configuration(UCompressMode) ..............................2-4258
2.150.1 Basic Compress Mode Configuration Object ID ................................2-4258
2.150.2 Measurement Purpose.....................................................................2-4259
2.150.3 Transmission Gap Pattern Repetition Count ......................................2-4260
2.150.4 Transmission Gap Starting Slot Number............................................2-4262
2.150.5 Transmission Gap Length 1..............................................................2-4263
2.150.6 Transmission Gap Length 2..............................................................2-4265
2.150.7 Transmission Gap Start Distance......................................................2-4268
2.150.8 Transmission Gap Pattern 1 Length ..................................................2-4269
2.150.9 UL/DL Compressed Mode Selection .................................................2-4271
2.150.10 Downlink Compressed Mode Method ..............................................2-4272
2.150.11 Uplink Compressed Mode Method ..................................................2-4274
2.150.12 Downlink Frame Type ....................................................................2-4275
2.150.13 TGCFN Offset ...............................................................................2-4277
2.150.14 TGCFN Hysteresis Coefficient ........................................................2-4278
2.150.15 Guarded CFN Interval for New RL Setup During Soft Handover........2-4279
2.150.16 Recovery Period Power Control Mode.............................................2-4281
2.150.17 Initial Transmit Power Mode ...........................................................2-4282
2.150.18 DeltaSIR1 .....................................................................................2-4284
2.150.19 DeltaSIRafter1...............................................................................2-4286
2.150.20 DeltaSIR2 .....................................................................................2-4288
2.150.21 DeltaSIRafter2...............................................................................2-4289
2.150.22 N Identify Abort..............................................................................2-4291
2.150.23 T Reconfirm Abort..........................................................................2-4292
2.151 DPI Basic Priority Mapping Relationship(UDpiBasPriMapping) .....................2-4294
2.151.1 DPI Basic Priority Mapping Relationship Object ID.............................2-4294
2.151.2 Application Service Type Priority Class .............................................2-4295
2.151.3 Basic Priority ...................................................................................2-4296
2.151.4 DPI Basic Priority ............................................................................2-4298
XCIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.152 Dynamic Radio Bearer Control Information of DPI Service(UDpiDrbc)...........2-4299

2.152.1 Dynamic Radio Bearer Control Information of DPI Service Object
ID .....................................................................................................2-4299
2.152.2 Used DPI Application Service Type...................................................2-4300
2.152.3 Used Dynamic Radio Bearer Control Information Profile.....................2-4301
2.153 CS/PS Pool Routing Function(UCNPoolRoutingFunction) ............................2-4303
2.153.1 CS/PS Pool Routing Function Object ID ............................................2-4303
2.154 Configuration of IDNNS route to Cs/Ps Pool(UIDNNSRouting) .....................2-4304
2.154.1 Configuration of IDNNS route to Cs/Ps Pool Object ID .......................2-4304
2.154.2 Start Value of IDNNS .......................................................................2-4305
2.154.3 End Value of IDNNS ........................................................................2-4306
2.154.4 Resource Pool Identifier in CS Domain .............................................2-4308
2.154.5 Resource Pool Identifier in PS Domain..............................................2-4309
2.155 Configuration of IMSI route to Cs/Ps Pool(UIMSIRouting) ............................2-4310
2.155.1 Configuration of IMSI route to Cs/Ps Pool Object ID...........................2-4310
2.155.2 IMSI Map Rule No ........................................................................... 2-4311
2.155.3 The Imsi Matched Digit ....................................................................2-4313
2.155.4 The Imsi Mask Flag .........................................................................2-4314
2.156 Eutran Neighbouring Cell Black List(UENbrBlkList) ......................................2-4318
2.156.1 Eutran Neighbouring Cell Black List Object ID ...................................2-4318
2.156.2 State Indicator Used for EUTRAN Blacklist Cell Configuration ............2-4319
2.156.5 Number of EUTRAN Blacklist Cells Per Frequency ............................2-4325
2.157 Imei for Black List (UImeiBlkList) ................................................................2-4328
2.157.1 Imei for Black List Object ID .............................................................2-4328
2.157.2 IMEI Length ....................................................................................2-4329
2.157.3 IMEI................................................................................................2-4330
2.157.4 IMEI Utility Switch for Barring Uu Periodical Quality Measurement ......2-4331
2.157.5 IMEI Utility Switch for Barring CS Load Balance ................................2-4333
2.157.6 IMEI Utility Switch for Power Control .................................................2-4334
2.157.7 IMEI Utility Extension .......................................................................2-4336
2.157.8 IMEI Related Offset of Uplink Maximum SIR Target ...........................2-4337
2.157.9 IMEI Related Offset of Uplink Minimum SIR Target ............................2-4338
2.157.10 IMEI Related Offset of Downlink Maximum DPCH Power .................2-4340
C
SJ-20141209142030-013|2015-11-12 (R1.3)
2.157.11 IMEI Related Offset of Downlink Minimum DPCH Power ..................2-4341

2.157.12 IMEI Utility Switch for Considering Load When Configure Power
Control Parameters ............................................................................2-4343
2.157.13 IMEI Utility Switch for Barring Uu AGPS Periodical Location
Measurement in the MR function.........................................................2-4344
2.157.14 Switch for Prohibiting FACH Load Balance Based on IMEI
(CELL_PCH/URA_PCH->CELL_FACH) ..............................................2-4346
2.157.15 IMEI Utility Switch for Turn on Uu Period MR AGPS Location
Measurement with Absolute Priority in the MR function.........................2-4347
2.157.16 IMEI Utility Switch for Indicating Whether Transitioning to PCH is
Allowed .............................................................................................2-4349
2.157.17 Switch for Prohibiting DC-HSUPA Based on IMEI ............................2-4350
2.157.18 Switch for Prohibiting Enhanced Downlink CELL_FACH Based on
IMEI ..................................................................................................2-4351
2.157.19 Switch for Prohibiting UL DTX and DL DRX Based on IMEI ..............2-4353
2.157.20 Switch for Prohibiting F-DPCH Based on IMEI .................................2-4354
2.157.21 Indicator for Indicating Whether Signalling Connection is Released
after SCRI is Received by the RNC Which is Configured Based on
IMEI ..................................................................................................2-4355
2.158 Imei TAC List for SPID(UImeiTacSPID) .......................................................2-4357
2.158.1 Imei TAC List for SPID Object ID ......................................................2-4357
2.158.2 Length of IMEI TAC .........................................................................2-4358
2.158.3 Imei TAC.........................................................................................2-4360
2.158.4 Used RAN Priority When UE in Dedicated State ................................2-4361
2.158.5 SPID configured by RNC..................................................................2-4362
2.159 RAN Priority When UE in Dedicated State(UDePri)......................................2-4363
2.159.1 RAN Priority When UE in Dedicated State Object ID ..........................2-4363
2.159.2 RNC SPID ......................................................................................2-4365
2.159.3 Number of EUTRAN Centre Frequencies ..........................................2-4366
2.159.4 EUTRAN Frequency Band Indicator..................................................2-4367
2.159.6 Dedicated Priority of EUTRAN..........................................................2-4373
2.159.7 Number of UTRAN Centre Frequencies ............................................2-4374
2.159.8 UTRAN Frequency Band Indicator ....................................................2-4375
2.159.9 UTRAN UARFCN of the downlink carrier frequency ..........................2-4376
2.159.10 Dedicated Priority of UTRAN ..........................................................2-4378
2.159.11 Number of GSM Band ....................................................................2-4379
2.159.12 Gsm Band Indicator .......................................................................2-4381
2.159.13 Dedicated Priority of GSM ..............................................................2-4382
CI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.159.14 Priority Group ID............................................................................2-4383

2.159.15 BCCH ARFCN...............................................................................2-4385
2.160 HS-PDSCH Measurement Power Offset Profile(UMPOProfile)......................2-4386
2.160.1 HS-PDSCH Measurement Power Offset Profile Object ID ..................2-4386
2.160.2 HS-PDSCH Measurement Power Offset Profile ID .............................2-4388
2.161 HS-PDSCH Measurement Power Offset Configuration (UMPO)....................2-4389
2.161.1 HS-PDSCH Measurement Power Offset Configuration Object ID ........2-4389
2.161.2 Actual Configuration of HSDPA Evolution Function of UE in the Cell
(64QAM) ...........................................................................................2-4390
(MIMO)..............................................................................................2-4392
(DC-HSDPA) .....................................................................................2-4393
2.161.5 HS-PDSCH Measurement Power Offset............................................2-4394
2.162 PLMN Group(PlmnGroup) ..........................................................................2-4396
2.162.1
Mobile Country Code
.........................................................................................................2-4396
2.163 Module(Module) ........................................................................................2-4398
2.163.1 Module No ......................................................................................2-4398
2.163.2 mbms service flag............................................................................2-4400
2.164 Local ManagedElement Plmn Information(UPlmnSpecFunction)...................2-4401
2.164.1 Used Local PLMN Group .................................................................2-4401
2.165 Radio Network Layer User Plane Global Parameters(URnluCfg)...................2-4402
2.165.1 The Threshold of Consecutive Lost SID Duration...............................2-4402
2.166 NBAP Link(UNbapLink)..............................................................................2-4404
2.166.1 Use Type ........................................................................................2-4404
2.166.2 Bear Type of Preferred NBAP Link....................................................2-4405
2.166.3 Preferred UniSaalTp NBAP Link .......................................................2-4406
2.166.4 Preferred SctpAssociation NBAP Link ...............................................2-4407
2.166.5 Bear Type of First Standby NBAP Link ..............................................2-4409
2.166.6 First Standby UniSaalTp NBAP Link .................................................2-4410
2.166.7 First Standby SctpAssociation NBAP Link ......................................... 2-4411
2.166.8 Bear Type of Second Standby NBAP Link .........................................2-4412
2.166.9 Second Standby UniSaalTp NBAP Link ............................................2-4413
2.166.10 Second Standby SctpAssociation NBAP Link ..................................2-4415
2.166.11 NodeB Communication Port No. .....................................................2-4416
CII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.166.12 Sctp Stream No. ............................................................................2-4417

2.167 Iucs Link(UIucsLink) ..................................................................................2-4418
2.167.1 Additional Transport Time Delay .......................................................2-4418
2.167.2 Additional Transport Time Delay Jitter ...............................................2-4419
2.167.3 Load Unload Status in CS Domain....................................................2-4421
2.168 Iups Link(UIupsLink) ..................................................................................2-4425
2.168.1 Additional Transport Time Delay .......................................................2-4425
2.168.2 Additional Transport Time Delay Jitter ...............................................2-4426
2.168.3 Load Unload Status in PS Domain....................................................2-4427
2.168.6 Method of Identify EUtran cell...........................................................2-4431
2.169 Logical MSC Link(ULogicalMscLink) ...........................................................2-4432
2.169.1 Preference CN Office Flag in CS Domain ..........................................2-4432
2.169.2 Default Office Flag in CS Domain .....................................................2-4433
2.169.3 Capacity Weight in CS Domain.........................................................2-4435
2.169.4 Number of Network Resource Identifier in CS Domain .......................2-4436
2.169.5 Network Resource Identifier in CS Domain........................................2-4438
2.170 Logical Iups Link(ULogicalIupsLink) ............................................................2-4440
2.170.1 Preference CN Office Flag in PS Domain ..........................................2-4440
2.170.2 Default Office Flag in PS Domain......................................................2-4442
2.170.3 Capacity Weight in PS Domain .........................................................2-4443
2.170.4 Number of Network Resource Identifier in PS Domain .......................2-4444
2.170.5 Network Resource Identifier in PS Domain ........................................2-4446
2.171 Iur Link(UIurLink) .......................................................................................2-4448
2.171.1 Adjacent Net Element Identifier ........................................................2-4448
2.171.2 Adjacent NE Version ........................................................................2-4449
2.171.3 DCH ID Offset Indicator ...................................................................2-4451
2.171.4 Timer of Relocation Delay for CS Service..........................................2-4452
2.171.5 Timer of Relocation Delay for PS Service ..........................................2-4453
2.171.6 Whether Support Hard-handover With Relocation for CS Service .......2-4455
2.171.7 Whether Support HSDPA Iur Interface Process .................................2-4456
2.171.8 Whether Support HSUPA Iur Interface Process .................................2-4458
CIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.171.9 Whether Support one-way and bidirectional conversion by means of

DCH MODIFY ...................................................................................2-4459
2.171.10 Whether Support Hard Handover DSCR .........................................2-4461
2.171.11 Whether SRNC forcing Iur transport bearer to be established during
Intra-DRNS Serving HS-DSCH Radio Link Change ..............................2-4462
2.171.12 Whether Need to Send AGPS Synchronization Information .............2-4463
2.171.13 Whether Use DSCR for PS Service When UE all RLs Have Moved to
DRNC ...............................................................................................2-4465
2.171.14 Whether Support AMR/VoIP over HSPA ..........................................2-4466
2.171.15 Support Accompanying Compressed Mode or Dedicated
Compressed Mode.............................................................................2-4467
2.171.16 Whether Support UE not Involved Relocation for CS Service............2-4469
2.171.17 Whether Support UE not Involved Relocation for PS Service ............2-4470
2.171.18 Whether Support Fast Reconfiguration............................................2-4472
2.171.19 Whether Support User Plane Sending Control Frame.......................2-4473
2.171.20 Whether the DRNC supports the optimized TCP function .................2-4474
2.171.21 Whether Process 1A/1C/1D Event of DRNC's Cell ...........................2-4476
2.171.22 Whether Process Intra-Frequency Events of DRNC's Cell in RRC
Procedure .........................................................................................2-4477
2.171.23 Whether Activate Compressed Mode for CS Service When Radio
Link via IUR Exists ............................................................................2-4478
2.171.24 Whether Support PS (0kbps/0kbps) ................................................2-4480
2.171.25 Whether Support Hard-handover With Relocation for PS Service ......2-4481
2.171.26 Whether Support DPI-SPI Change..................................................2-4482
2.171.27 Whether Support Virtual LAC Paging ..............................................2-4484
2.171.28 Whether Support Periodically Send FP Data....................................2-4485
2.171.29 Whether Support Reserved User Notify Indication over Iur ...............2-4486
2.171.30 Whether Support Diamond User Notify Indication over Iur ................2-4488
2.171.31 Whether Support RNC forward PDCP data when Relocation ............2-4489
2.171.32 Whether Support DPCCH BER Report at DRNC..............................2-4490
2.171.33 Whether Support CELL_FACH .......................................................2-4492
2.171.34 Whether Support URA_PCH...........................................................2-4493
2.171.35 Whether Support CELL_PCH .........................................................2-4494
2.171.36 Load Sharing Method between RNC ...............................................2-4495
2.171.37 The Valid time of RNC load ............................................................2-4496
2.171.38 The OverLoad threshold of Control Plane........................................2-4498
2.171.39 The OverLoad threshold of User Plane ...........................................2-4499
2.171.40 Transport BandWidth Release Switch based on Overload ................2-4500
CIV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.171.41 The protocol version that network element uses...............................2-4502

2.171.42 Whether Support MF-HSDPA .........................................................2-4503
2.171.43 Secondary Serving Cell List Filling Principle Indicator.......................2-4504
2.171.44 Cell Update Message Transfer over Iur Indicator..............................2-4506
2.171.45 Inter Frequency MRO Supported Indicator ......................................2-4507
2.171.46 PCI, TAC and PLMN List Filling Principle Indicator ...........................2-4508
2.172 Iurg Link(UIurgLink) ...................................................................................2-4510
2.172.2 The protocol version that network element uses ................................ 2-4511
2.172.3 Whether Support Iur-g Signalling Procedure......................................2-4513
2.172.4 Neighboring BSC Whether Support PS Handover..............................2-4514
2.172.5 Neighboring BSC Whether Support DTM Handover ...........................2-4516
2.173 UE Model Category List of UE Model ID Code(UUeCategoryMapping)..........2-4517
2.173.1 UE Model Identification Code ...........................................................2-4517
2.173.2 UE Model Label...............................................................................2-4518
2.173.3 UE Model Category .........................................................................2-4520
2.174 HSPA Scheduling Priority Indication List for different UE Model
Category(UUeCategorySpiMapping) .............................................................2-4521
2.174.1 UE Model Category .........................................................................2-4521
2.174.2 HSPA Scheduling Priority Indication for different UE Model
Category ...........................................................................................2-4523
2.175 Extended Information 2 of UTRAN Cell(UExtCelInfoFDD) ............................2-4524
2.175.1 CELL_FACH Absolute Priority Measurement Indicator .......................2-4524
2.175.2 E-UTRA Frequency RACH Reporting Quantity ..................................2-4526
2.175.3 E-UTRA Frequency RACH Reporting Threshold for RSRP .................2-4527
2.175.4 E-UTRA Frequency RACH Reporting Threshold for RSRQ ................2-4529
2.175.5 RACH Reporting Priority for Measurmented Cells ..............................2-4530
2.175.6 QqualminEUTRA-WB Configuration Tag ...........................................2-4532
2.175.7 Wait Time for RRC Connection Reestablishment for High Cell
Load .................................................................................................2-4534
2.175.8 Sending Times of Paging Message of CS for High Cell Load ..............2-4535
2.175.9 Sending Times of Paging Message of PS for High Cell Load ..............2-4537
2.175.10 Threshold of the Users Number of the RRC Connection only in
CELL_DCH state Co-Exist in the Cell for High Cell Load ......................2-4538
2.175.11 Maximum Bit Rate on DL DCH for NRT PS RAB in Serving Cell for
High Cell Load ...................................................................................2-4540
2.175.12 Maximum Bit Rate on E-DCH for NRT PS RAB in Serving Cell for
High Cell Load ...................................................................................2-4542
CV
SJ-20141209142030-013|2015-11-12 (R1.3)
2.175.13 Maximum Bit Rate on UL DCH for NRT PS RAB in Serving Cell for
High Cell Load ...................................................................................2-4543
2.175.14 Downlink High Power Threshold for Load Based Adaptive Parameter
Adjustment ........................................................................................2-4545
2.175.15 Downlink Power Threshold for Releasing from High Load for Load
Based Adaptive Parameter Adjustment ...............................................2-4546
2.175.16 Uplink High RoT Threshold for Load Based Adaptive Parameter
Adjustment ........................................................................................2-4548
2.175.17 Uplink RoT Threshold for Releasing from High Load for Load Based
Adaptive Parameter Adjustment..........................................................2-4549
2.175.18 Uplink High Equivalent AMR User Quantity Threshold for Load Based
Adaptive Parameter Adjustment..........................................................2-4551
2.175.19 Uplink Equivalent AMR User Quantity Threshold for Releasing from
High Load for Load Based Adaptive Parameter Adjustment ..................2-4552
2.175.20 Whether Reporting Information for State CELL_DCH is Broadcast in
SIB ...................................................................................................2-4554
2.175.21 Switch of Balance Based on the Intra-frequency Measurement
Reported in RRC CONNECTION REQUEST .......................................2-4556
2.175.22 Whether Traffic Volume Measurement System Information is
Broadcast in SIB 12 ...........................................................................2-4557
2.175.23 The Offset of the CIO Used for the Macro Small Cell Load
Balancing ..........................................................................................2-4559
2.175.24 Uplink High RoT Threshold for Macro Small Cell Load Balancing ......2-4560
2.175.25
Uplink RoT Threshold for Releasing from High Load for Macro Small Cell
Load Balancing
.........................................................................................................2-4562
2.175.26 Downlink Power High Load Threshold for Macro Small Cell Load
Balancing ..........................................................................................2-4564
2.175.27
Downlink Power Threshold for Releasing from High Load for Macro Small
Cell Load Balancing
.........................................................................................................2-4565
2.175.28 Whether Cell Selection and Re-selection Info about Intra-frequency
Neighbouring Cells is Broadcast in SIB 12 ...........................................2-4567
2.175.29 Whether Cell Selection and Re-selection Info about Inter-frequency
Neighbouring Cells is Broadcast in SIB 12 ...........................................2-4569
2.175.30 The Switch for Attempting on CELL_FACH for the Second Time for
the PS service during the RRC Establishment Stage ............................2-4571
CVI
SJ-20141209142030-013|2015-11-12 (R1.3)
2.175.31 Switch of Iu Interface Interrupt Processing at Cell Level (Stop

Broadcasting PLMN(s) in MIB for Inaccessible Iu-CS or Set Cell
Barred)..............................................................................................2-4572
2.175.32 RTWP Threshold to Enter Uplink High Load State in RACH
2.175.33 RTWP Threshold to Recover to Uplink Normal Load State in RACH
2.175.34 Switch of Considering Frequency Priority in UMTS->E-UTRAN
Inter-RAT Handover or Redirection......................................................2-4577
2.175.35 Switch of Load Triggered Handover from UMTS to LTE....................2-4578
2.175.36 Power Threshold for Releasing from Downlink High Load for Load
Triggered Handover from UMTS to LTE ...............................................2-4580
2.175.37 Downlink High Power Threshold for Load Triggered Handover from
UMTS to LTE .....................................................................................2-4581
2.175.38 RoT Threshold for Releasing from Uplink High Load for Load
Triggered Handover from UMTS to LTE ...............................................2-4583
2.175.39 Uplink High RoT Threshold for Load Triggered Handover from UMTS
to LTE ...............................................................................................2-4584
2.175.40 CPICH Ec/N0 Threshold for Small Cell Pilot Pollution Detection........2-4586
2.175.41 CPICH RSCP Threshold for Small Cell Pilot Pollution Detection .......2-4587
2.175.42 Uplink Serious Interference Threshold for Small Cell Interference
Detection...........................................................................................2-4589
2.175.43 Camping Strategy Switch for Cell....................................................2-4590
2.175.44 Heavy Traffic Threshold for Number of RRC Connection Request for
Camping Strategy Switch in Multi-carriers Network...............................2-4591
2.175.45 Light Traffic Threshold for Number of RRC Connection Request for
Camping Strategy Switch in Multi-carriers Network...............................2-4593
2.175.46 Heavy Traffic Threshold for Ratio of RRC Connection Reject due to
Admission Failure to RRC Connection Request ...................................2-4595
2.175.47 Light Traffic Threshold for Ratio of RRC Connection Reject due to
Admission Failure to RRC Connection Request ...................................2-4596
2.175.48 Fast Return to Cell-DCH for CS MO Initial Direct Transfer Switch ......2-4598
2.175.49 Fast Return to Cell-DCH for CS MT Initial Direct Transfer Switch ......2-4599
2.175.50 DCH Downlink AC Threshold Offset for CS .....................................2-4601
2.175.51 DCH Downlink AC Threshold Offset for PS......................................2-4602
the Others category service during the RRC Establishment Stage.........2-4604
2.175.53 Uplink Admission Threshold of GSM Neighboring Cell .....................2-4605
2.175.54 Downlink Admission Threshold of GSM Neighboring Cell .................2-4607
CVII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.175.55 User Number Offset of UTRAN to GSM for InterRAT Energy

Saving...............................................................................................2-4608
2.175.56 CS User Number Threshold for InterRAT Energy Saving ..................2-4609
2.175.57 PS User Number Threshold for InterRAT Energy Saving .................. 2-4611
2.175.58 Switch On Algorithm for InterRAT Energy Saving .............................2-4612
2.175.59 Power Offset of the PLMN Admission Threshold Relative to the
Downlink DCH Admission Threshold ...................................................2-4613
2.175.60 Maximum R99 Power When Downlink Power Shared by Different
PLMNs (no HSDPA UE) .....................................................................2-4615
2.175.61 Switch for Setting HS Power Ratio for Different PLMN .....................2-4616
2.175.62 Quality Judgement Switch for Target Radio Link of Event 1D ............2-4618
2.175.63 Statistic Window Size for RoT Average Filtering in RTWP and Uplink
Equivalent AMR User Number jointly Admission Control Based UL
CAC..................................................................................................2-4619
2.175.64 Switch of Fast Return to Eutran for PS when UE RRC Status
Transferring to PCH/IDLE (CELL_PCH/URA_PCH/idle)........................2-4621
2.175.65 Switch for Updating the Power Offset of Reference E-TFCIs When
Macro-Micro Soft Handover ................................................................2-4622
2.175.66 Inter-frequency Balance Switch for Uplink High Load Small Cell .......2-4624
2.175.67 Uplink RoT Threshold for Releasing from High Load for Small Cell
Inter-frequency Balance .....................................................................2-4625
2.175.68 Uplink High RoT Threshold for Small Cell Inter-frequency
Balance.............................................................................................2-4627
2.175.69 Uplink Equivalent AMR User Quantity Threshold for Releasing from
High Load for Small Cell Inter-frequency Balance.................................2-4628
2.175.70 Uplink High Equivalent AMR User Quantity Threshold for Small Cell
Inter-frequency Balance .....................................................................2-4630
2.175.71 Switch of Uplink Control Channel Quality based OLPC for HSPA
Subscriber in Macro-Micro Soft Handover Condition.............................2-4631
2.175.72 Threshold for Uplink and Downlink Coverage Imbalance in
Macro-Micro Soft Handover Area ........................................................2-4633
2.175.73 High Load Cell Maximum Allowed SIR Target Increasing Value of
HSPA Subscriber in Macro-Micro Soft Handover Condition ...................2-4635
2.175.74 Low Load Cell Maximum Allowed SIR Target Increasing Value of
HSPA Subscriber in Macro-Micro Soft Handover ..................................2-4636
2.175.75 RoT Threshold for Releasing from High Load for Determining the
Maximum Allowed SIR Target Increasing Value of HSPA Subscriber ......2-4638
2.175.76 High RoT Threshold for Determining the Maximum Allowed SIR
Target Increasing Value of HSPA Subscriber........................................2-4639
CVIII
SJ-20141209142030-013|2015-11-12 (R1.3)
2.175.77 SIR Target Increasing Value when Macro-Micro Soft Handover

Happen in Uplink and Downlink Coverage Imbalance Area ...................2-4641
2.175.78 SIR Target Margin for Triggering HSPA Uplink Control Channel
Quality based OLPC in Macro-Micro Soft Handover Condition ..............2-4642
2.175.79 Uplink Rx Gain ..............................................................................2-4644
2.175.80
Automatic Neighboring Pico Cell's Priority Configuration of Macro Cells
.........................................................................................................2-4646
2.175.81 Switch for bubble noise detect and correct function ..........................2-4647
2.175.82 Offset for Threshold of the Quality of the Used Frequency for Event
1E.....................................................................................................2-4649
2.175.83 Blind Fast Return to LTE penalty Switch ..........................................2-4650
2.175.84 Blind redirection to LTE Timer 2 ......................................................2-4651
2.175.85 PS in CELL_DCH Blind Fast Return to LTE Switch ..........................2-4652
2.175.86 Blind redirection to LTE Timer 1 (Short) ...........................................2-4654
2.175.87 Blind redirection to LTE Timer 1 (Long) ...........................................2-4655
2.175.88 2D/2F RSCP Threshold Offset for Inter Frequency Handover ...........2-4656
2.175.89 2D/2F Ec/No Threshold Offset for Inter Frequency Handover............2-4658
2.175.90 The Controlling Switch of the Rate Upgrading of the PS Service,
Used for CS+PS Scene ......................................................................2-4659
2.175.91 Event 1D Use CIO Indicator ...........................................................2-4661
2.175.92 Maximum R99 Power When Downlink Power Shared by Different
PLMNs (There is HSDPA UE) .............................................................2-4662
2.175.93 Cell Switch for MRO from LTE to UMTS Based on RIM ....................2-4664
2.175.94 User Number with Compressed Mode Activation for MRO Strategy
from LTE to UMTS Based on RIM .......................................................2-4665
2.175.95 Maximum Number of Users on FACH..............................................2-4667
2.175.96 Fach Admission Control Switch ......................................................2-4668
2.175.97 FACH Measurement Occasion Cycle Length Coefficient...................2-4670
2.175.98 Channel Quality Evaluation Switch of RRC Balance.........................2-4671
2.175.99 Downlink Power Threshold for Releasing from High Load Used for
the Channel Type Decision when Controlling the UE Transitioning from
the PCH State....................................................................................2-4673
the PS service during the RRC Establishment Stage ............................2-4675
2.175.101 Downlink Power Threshold for Releasing from High Load Used for
the Channel Type Decision when Controlling the UE Transitioning from
the PCH State....................................................................................2-4677
CIX
SJ-20141209142030-013|2015-11-12 (R1.3)
2.175.102 Uplink RoT Threshold for Releasing from High Load Used for the
Channel Type Decision when Controlling the UE Transitioning from the
PCH State .........................................................................................2-4679
2.175.103 Downlink Power High Load Threshold Used for the Channel Type
Decision when Controlling the UE Transitioning from the PCH State ......2-4681
the Others category service during the RRC Establishment Stage.........2-4683
2.176 SPID and PriGroup relationship Profile(USPIDPriGProfile) ...........................2-4684
2.176.1 SPID and priority relation Profile Identity ...........................................2-4684
2.177 SPID and PriGroup relationship(USPIDPriG) ...............................................2-4686
2.177.1 SPID Index......................................................................................2-4686
2.177.4 Priority Group ID..............................................................................2-4690
2.177.5 T322 Configuration Tag....................................................................2-4691
2.177.6 Valid time for dedicated prioritiesT322 ...................................... 2-4692
CX
SJ-20141209142030-013|2015-11-12 (R1.3)
About This Manual

Manual Description
Describes parameters of ZXUR 9000 UMTS radio resource management, including the
meaning, managed object, range and step, default value, related feature and service or
node impact of ZXUR 9000 UMTS parameters.
What is in This Manual

This manual contains the following chapters:
Chapter
Summary
Chapter 1, Guide to Reading
Introduces the classification of radio parameters and how the
This Manual
parameters are described in this manual
Chapter 2, RNC Radio
Describe the ZXUR 9000 UMTS radio parameters
Parameters
Intended Audience
l
l
l
l
Network planners
Field engineers
System engineers
Shift operators
I
SJ-20141209142030-013|2015-11-12 (R1.3)
This page intentionally left blank.
II
SJ-20141209142030-013|2015-11-12 (R1.3)
Chapter 1
Guide to Reading This

Manual
Parameter table template is shown in Table 1-1. Parameter description in this manual is
based on the following template.
Table 1-1 How to Read Parameter Table
Radio Parameter Name
Full Name
Name of the parameter shown on user interface
Abbreviated Name
Parameter name in wireless network plan document (XML)
Managed Object
Managed object class the parameters belongs to

Data Item Description
3GPP Name
Parameter name in 3GPP specifications
3GPP Reference
3GPP specifications reference
Description
A brief introduction of the parameter
Instance
The instance for which the parameter is configured.
Related Feature Number
The parameter feature number related to the wireless network
Related Feature Name
The parameter feature name related to the wireless network
Related Feature Guide
The parameter feature guide related to the wireless network
Value Range and Step
The value range and step of the parameter
Unit
the value unit of the parameter
Default Value
The default value, as initially set by the system, if not explicitly set
at MO creation
Related Parameters
Other parameter(s) that can influence the described parameter
Restriction with Related
Relation between related parameters
Parameters
Data Type
Data Type of the Parameter
1-1
SJ-20141209142030-013|2015-11-12 (R1.3)
ZXUR 9000 UMTS Radio Parameter Reference
TYPE
The parameter is divided into the following four category:

Fixed the parameter value can be set default and need not adjust
normally
Fixed-keep monitoringthe parameter value can be initially set
default and adjust later according to network performance
Network Planning & Optimization: the value is set according to
Network planning and optimization
Don't Carethe parameter need not care
Negotiation With CN
Indication whether the parameter should cordite with core network

setting
Function Switch
Indication whether the parameter isaswitch parameter
Configuration Rule and
A briefconfiguration rule introduction for the parameter
Adjustment Suggestion
Default Value Configuration
The reason forthe default value setting
Reason
Change Take Effect
Indicate when the new value will take effect after the parameter
value is modified
Service or Node Impact
Indicate whether the service or node is affected when the parameter

valued is modified
Equipment Impaction Level
The equipment impaction when the parameter value is modified can

be divided into four level according to the object impacted
0: Indicate no impaction when the parameter is modified
1: Indicate impaction on the cell when the parameter is modified
2: Indicate impaction on the Node B when the parameter is modified
3: Indicate impaction on the RNC when the parameter is modified
Service Impaction Level
The service impaction when the parameter value is modified can

be divided into four level
0: Indicate no impaction on the active user and idle user when the
parameter is modified
1: Indicate impaction on the idle user but no impaction on the active
user
2: Indicate no impaction on the idle user and impaction on the
active user. The ongoing service will interrupt but the service can
be resume in short time (60s) for example the user can re-initial
the service at once
3: Indicate impaction on the idle user and the active user. The
network service will interrupt for some time and will resume later
How to Impact
The detail description of the impaction after the parameter value

is modified
Access
Indication whether the parameter can be read (Read), written (Write)

or modified after created (Restricted)
1-2
SJ-20141209142030-013|2015-11-12 (R1.3)
Chapter 1 Guide to Reading This Manual
OMC Access path
Path for how toAccess the parameter in OMC
Parameter Modifying Version
Whether this parameter is modified in this version
Parameter Modifying Detail
Modification details of this parameter in this version
In this manual, it is recommended to use Abbreviated Name as keyword to query

information of target parameters.
1-3
SJ-20141209142030-013|2015-11-12 (R1.3)
This page intentionally left blank.
1-4
SJ-20141209142030-013|2015-11-12 (R1.3)
Chapter 2
RNC Radio Parameters

Table of Contents
UMTS Logical Function Configuration(URncFunction)................................................2-6
Extended Info of RNC(URncInfo)............................................................................2-384
Cpu Load Control Priority based on Qos (UCpuCtrlPri) ..........................................2-597
Pico Son Configuration(UPicoSonMeasCfg)...........................................................2-602
Relation Adding Configuration(UANR)....................................................................2-616
RNC Pool Global Configuration (URncPool) ...........................................................2-630
Reserved User Global Configuration (URsvdUeGlobalPara)...................................2-641
Diamond User Global Configuration (UDiamondUserGlobalPara)...........................2-684
Common E-DCH in CELL_FACH State Configuration(UEdchRcFach)....................2-701
E-DCH in CELL_DCH State Profile(UEdchRcDchProfile) .......................................2-728
E-DCH in CELL_DCH State Configuration(UEdchRcDch) ......................................2-731
Location Area Configuration (ULocationArea).........................................................2-828
Routing Area Configuration (URoutingArea) ...........................................................2-830
Service Area Configuration in CS+PS Domain(UServiceArea) ...............................2-833
Service Area Configuration in BC Domain(UServiceAreaBc) ..................................2-836
Logic RNC Configuration(ULogicalRnc)..................................................................2-838
Qos Configuration Related to Logical Iur Link(ULogicalIurQos) ............................2-1047
QOS Function(UQosFunction)..............................................................................2-1052
Qos Basic Configuration(UBasPri)........................................................................2-1053
Basic Priority Mapping Relationship(UBasPriMapping) .........................................2-1066
Scheduling Priority Mapping Relationship Profile(USchPriMappingProfile) ...........2-1072
Scheduling Priority Mapping Relationship(USchPriMapping) ................................2-1074
Application Priority Mapping Relationship Profile(UAppPriMappingProfile) ...........2-1081
Application Priority Mapping Relationship(UAppPriMapping) ................................2-1085
Transport Bearer Type Profile Related to Basic Priority (UTbTypeProfile) .............2-1093
Transport Bearer Type Related to Basic Priority (UTbType)..................................2-1097
Dedicated Service Transport Bearer Qos Profile(UDedSrvTbProfile) .................... 2-1106
Dedicated Service Transport Bearer Qos Configuration(UDedSrvTb) ................... 2-1111
Access Control Profile Related to Basic Priority (UBPriAcProfile) ......................... 2-1130
Access Control Related to Basic Priority(UBPriAc) ............................................... 2-1134
User Authorized PLMN+SNAC Information(UImsiSnacFilter) ............................... 2-1155
Reserved User Configuration (URsvdUeImsiList) ................................................. 2-1165
Diamond User Configuration(UDiamondUserImsiList) .......................................... 2-1184
LAC and SNAC Information(USnac) .....................................................................2-1200
Golden/Silver/Bronze Category List of RRC
Establishment(URrcCategoryMapping).................................................................2-1204
Basic Priority List of RRC Setup category(URrcCategoryBasPriMapping) ............2-1210
2-1
SJ-20141209142030-013|2015-11-12 (R1.3)
Roaming Ue IMSI Configuration List (URoamingIMSI)..........................................2-1218

UE Timers and Constants Information(UUeCnst)..................................................2-1223
CN NAS System Information(UCnInfo) .................................................................2-1264
Iu Interface Timers and Constants Information(UIuCnst) ......................................2-1277
Dynamic Radio Bearer Control Information Profile(UDrbcProfile)..........................2-1296
Dynamic Radio Bearer Control Information(UDrbc) ..............................................2-1299
Global Access Control Information(UGloAc) .........................................................2-1342
Hspa Configuration(UHspa)..................................................................................2-1354
Common EDCH Configuration(UCommEdch) ......................................................2-1447
Limiting HSDPA GBR Resource Consumption Profile(UGbrResLimitProfile) ........2-1483
Limiting HSDPA GBR Resource Consumption Configuration(UGbrResLimit) .......2-1485
MBMS Configuration(UMbms)..............................................................................2-1492
UE DTX/DRX Profile(UDtxDrxProfile) ...................................................................2-1519
UE DTX/DRX Configuration(UDtxDrx) ..................................................................2-1521
Power Control Profile Related to Service(USrvPcProfile)......................................2-1569
Power Control Related to Service(USrvPc)...........................................................2-1574
Power Control Related to Service for Reserved User(URsvdUserSrvPc)..............2-1664
Power Control Related to Service for Diamond User (UDiamondUserSrvPc)........2-1753
Power Control Related to Service and Diversity Mode(USrvDivPc).......................2-1842
Iub Link(UIubLink) ................................................................................................2-1901
Logical Iub Link(ULogicalIubLink) .........................................................................2-1963
UTRAN Registration Area(UUtranRegArea) .........................................................2-1968
Traffic Volume Measurement Profile(UTrvMeasProfile).........................................2-1970
UE Traffic Volume Period Measurement Configuration for
RACH(URachPrdUeTrv).......................................................................................2-1973
UP Traffic Volume Event Measurement Configuration for FACH(UFachEvUpTrv) .2-1986
UE Traffic Volume Event Measurement Configuration for DCH(UDchEvUeTrv) ....2-2006
UP Traffic Volume Event Measurement Configuration for DCH(UDchEvUpTrv) ....2-2039
UE Traffic Volume Period Measurement Configuration for DCH(UDchPrdUeTrv)..2-2072
UP Traffic Volume Measurement Configuration Number for Streaming Class on
HS-DSCH(UDedSHsdschEvUpTrv)......................................................................2-2085
UP Traffic Volume Measurement Configuration for Interactive and Background
Class on HS-DSCH(UDedIBHsdschEvUpTrv) ......................................................2-2103
UP Traffic Volume Measurement Configuration for HS-DSCH in
CELL_FACH(UComHsdschEvUpTrv) ...................................................................2-2122
UP Throughput Event Measurement Configuration for E-TTI
Switching(UETTIEdchEvUpTrv)............................................................................2-2140
UP Traffic Volume Measurement Configuration for E-DCH (UDedEdchEvUpTrv) .2-2158
UP Traffic Volume Measurement Configuration for E-DCH in
CELL_FACH(UComEdchEvUpTrv).......................................................................2-2176
E-DCH Throughput Measurement Configuration for HS-DSCH/E-DCH to
HS-DSCH/DCH Switching(UEdchtoDchUpTrv).....................................................2-2194
UE Traffic Volume Event Measurement Configuration for PCH(UPchEvUeTrv).....2-2212
Intra-frequency Measurement Profile(UIntraMeasProfile) .....................................2-2222
2-2
SJ-20141209142030-013|2015-11-12 (R1.3)
Chapter 2 RNC Radio Parameters
Intra-frequency Measurement Configuration Related to Traffic

Category(UIntraMeasSrvSpec).............................................................................2-2226
UE Intra-frequency Event Measurement Configuration for CPICH
Ec/No(UIntraEcNoEvMeas) ..................................................................................2-2229
RSCP(UIntraRscpEvMeas) ..................................................................................2-2250
Intra-frequency Measurement Configuration Unrelated to Traffic
Category(UIntraMeasNoSrvSpec) ........................................................................2-2272
UE Intra-frequency Period Measurement Configuration for CPICH
Ec/No(UIntraEcNoPrdMeas).................................................................................2-2273
RSCP(UIntraRscpPrdMeas) .................................................................................2-2279
Detected Set Measurement Configuration for CPICH
Ec/No(UIntraEcNoEvMeasForD) ..........................................................................2-2286
RSCP(UIntraRscpEvMeasForD)...........................................................................2-2301
UE Inter-frequency Measurement Profile(UInterMeasProfile)................................2-2316
Inter-frequency Measurement Configuration Related to Traffic
Category(UInterMeaSrvSpec) ..............................................................................2-2320
UE Inter-frequency Event Measurement Configuration for CPICH
Ec/No(UTRAN)(UInterEcNoEvMeasforU) .............................................................2-2323
RSCP(UTRAN)(UInterRscpEvMeasforU) .............................................................2-2340
Ec/No(GSM)(UInterEcNoEvMeasforG).................................................................2-2357
RSCP(GSM)(UInterRscpEvMeasforG) .................................................................2-2370
Ec/No(EUTRAN)(UInterEcNoEvMeasforE)...........................................................2-2384
RSCP(EUTRAN)(UInterRscpEvMeasforE) ...........................................................2-2397
Inter-frequency Measurement Configuration Unrelated to Traffic
Category(UInterMeasNoSrvSpec) ........................................................................ 2-2411
UE Inter-frequency Period Measurement Configuration for CPICH
Ec/No(UInterEcNoPrdMeas).................................................................................2-2413
RSCP(UInterRscpPrdMeas) .................................................................................2-2419
Inter-RAT Measurement Profile(URatMeasProfile)................................................2-2425
Inter-RAT Measurement Configuration Related to Traffic
Category(URatMeasSrvSpec) ..............................................................................2-2429
UE Inter-RAT Event Measurement Configuration for CPICH
Ec/No(GSM)(URatEcNoEvMeasforG) ..................................................................2-2433
RSCP(GSM)(URatRscpEvMeasforG)...................................................................2-2449
2-3
SJ-20141209142030-013|2015-11-12 (R1.3)

Ec/No(EUTRAN)(URatEcNoEvMeasforE) ............................................................2-2466
RSCP(EUTRAN)(URatRscpEvMeasforE).............................................................2-2483
Inter-RAT Measurement Configuration Unrelated to Traffic Category(URatMeasNoSrvSpec)..........................................................................................................2-2500
UE Inter-RAT Period Measurement Configuration for CPICH
Ec/No(URatEcNoPrdMeas) ..................................................................................2-2502
RSCP(URatRscpPrdMeas) .................................................................................. 2-2511
NodeB Common Measurement Profile(UNbComMeasProfile) ..............................2-2521
NodeB Common Measurement Configuration(UNbComMeas) .............................2-2525
NodeB Dedicated Measurement Profile(UNbDedMeasProfile)..............................2-2537
NodeB Dedicated Measurement Configuration(UNbDedMeas).............................2-2539
External ENodeB Function(UExternalENBFunction) .............................................2-2564
External EUTRAN Cell FDD(UExternalEUtranCellFDD) .......................................2-2569
External EUTRAN Cell TDD(UExternalEUtranCellTDD) .......................................2-2598
External RNC Function (UExternalRncFunction) ..................................................2-2624
External UTRAN Cell(UExternalUtranCellFDD) ....................................................2-2635
External GSM Cell(UExternalGsmCell).................................................................2-2800
UTRAN Cell(UUtranCellFDD)...............................................................................2-2844
Extended Info of UTRAN Cell(UCelInfoFDD)........................................................2-3129
Logic Cell Configuration(ULogicalCell) .................................................................2-3436
Neighbouring Cell(UUtranRelation) ......................................................................2-3462
GSM Neighbouring Cell(UGsmRelation)...............................................................2-3507
EUTRAN Neighbouring Cell(UEUtranRelation).....................................................2-3533
Cell Selection and Reselection Information(UCelSel) ...........................................2-3536
Hspa Configuration In A Cell(UCHspa).................................................................2-3609
MBMS Configuration In A Cell(UCMbms) .............................................................2-3667
MBMS Service Area Configuration(UMbmsSa).....................................................2-3679
MBMS Preferred Frequency Layer Configuration(UMbmsPLFreq)........................2-3682
MBMS Non Preferred Frequency Layer Configuration(UMbmsNPLFreq)..............2-3690
EFACH Configuration(UEFach) ............................................................................2-3698
SCCPCH Configuration(USccpch)........................................................................2-3721
PRACH Configuration(UPrach) ............................................................................2-3732
AICH Configuration(UAich)...................................................................................2-3766
MICH Configuration(UMich)..................................................................................2-3770
Load Control Information(ULdCtrl)........................................................................2-3775
SCPICH Configuration(UScpich) ..........................................................................2-3868
EFachPch Configuration(UEFachPch)..................................................................2-3873
Service Function(USrvFunction) ...........................................................................2-3889
Service Basic Configuration(USubSrv) .................................................................2-3890
UE Internal Measurement Profile(UUeIntMeasProfile) ..........................................2-3921
UE Transmitted Power Event Measurement Configuration for
AMR(UAmrEvtTPUeInt)........................................................................................2-3924
2-4
SJ-20141209142030-013|2015-11-12 (R1.3)
UE Transmitted Power Event Measurement Configuration for

PS(UPsEvtTPUeInt) .............................................................................................2-3934
UE Transmitted Power Event Measurement Configuration for Handover(UHoEvtTPUeInt).................................................................................................................2-3944
UE Rx-Tx Time Difference Period Measurement Configuration for
Location(UPrdRttUeInt) ........................................................................................2-3955
UE Rx-Tx Time Difference Event Measurement Configuration for
UTRAN(UEvtRttUeInt)..........................................................................................2-3962
UE Rx-Tx Time Difference Event Measurement Configuration for RL Timing
Adjustment(URlEvtRttUeInt) .................................................................................2-3972
UE Transmitted Power Event Report for Power Limitation Judgement
(UPwrLimTPUeInt) ...............................................................................................2-3983
Cell Reselection Frequency and Priority Information(UPriSel) ..............................2-3993
Load Balance Information(UPlBal)........................................................................2-4040
MR Configuration(UMR) .......................................................................................2-4139
Cell MR Configuration(UCMR) .............................................................................2-4191
CFN Offset Configuration (UCfnOffset).................................................................2-4206
Handover Configuration Based on Service(USrvBasedHo)...................................2-4214
Application Service Type Configuration (UAppSrvType) .......................................2-4230
QChat Service Configuration (UQChat) ................................................................2-4246
Basic Compress Mode Configuration(UCompressMode) ......................................2-4258
DPI Basic Priority Mapping Relationship(UDpiBasPriMapping).............................2-4294
Dynamic Radio Bearer Control Information of DPI Service(UDpiDrbc)..................2-4299
CS/PS Pool Routing Function(UCNPoolRoutingFunction) ....................................2-4303
Configuration of IDNNS route to Cs/Ps Pool(UIDNNSRouting) .............................2-4304
Configuration of IMSI route to Cs/Ps Pool(UIMSIRouting) ....................................2-4310
Eutran Neighbouring Cell Black List(UENbrBlkList) ..............................................2-4318
Imei for Black List (UImeiBlkList) ..........................................................................2-4328
Imei TAC List for SPID(UImeiTacSPID) ................................................................2-4357
RAN Priority When UE in Dedicated State(UDePri) ..............................................2-4363
HS-PDSCH Measurement Power Offset Profile(UMPOProfile) .............................2-4386
HS-PDSCH Measurement Power Offset Configuration (UMPO) ...........................2-4389
PLMN Group(PlmnGroup) ....................................................................................2-4396
Module(Module) ...................................................................................................2-4398
Local ManagedElement Plmn Information(UPlmnSpecFunction) ..........................2-4401
Radio Network Layer User Plane Global Parameters(URnluCfg) ..........................2-4402
NBAP Link(UNbapLink) ........................................................................................2-4404
Iucs Link(UIucsLink) .............................................................................................2-4418
Iups Link(UIupsLink).............................................................................................2-4425
Logical MSC Link(ULogicalMscLink) ....................................................................2-4432
Logical Iups Link(ULogicalIupsLink) .....................................................................2-4440
Iur Link(UIurLink)..................................................................................................2-4448
Iurg Link(UIurgLink)..............................................................................................2-4510
UE Model Category List of UE Model ID Code(UUeCategoryMapping).................2-4517
2-5
SJ-20141209142030-013|2015-11-12 (R1.3)
HSPA Scheduling Priority Indication List for different UE Model

Category(UUeCategorySpiMapping) ....................................................................2-4521
Extended Information 2 of UTRAN Cell(UExtCelInfoFDD) ....................................2-4524
SPID and PriGroup relationship Profile(USPIDPriGProfile)...................................2-4684
SPID and PriGroup relationship(USPIDPriG)........................................................2-4686
2.1 UMTS Logical Function

Configuration(URncFunction)
2.1.1 RNC Configuration Object ID
Full Name
RNC Configuration Object ID
Abbreviated Name
URncFunctionId
Managed Object
UMTS Logical Function Configuration(URncFunction)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the RNC configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
It must be unique under the parent object and cannot be modified.
2-6
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
Immediately at Commit
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration
N/A
N/A
2.1.2 Description
Full Name
Description
Abbreviated Name
description
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter describes the object.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Fixed
2-7
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
It cannot be modified. Normally, it is set to a service field or a
combination of service fields, for example, RNCID=1001.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.1.3 User Label

Full Name
User Label
Abbreviated Name
userLabel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the user label of the object.
Instance
RNC
N/A
N/A
N/A
0..80
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-8
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
string
Parameter Type
Fixed-keep monitoring
Negotiation With CN
No
Function Switch
No
It is defined by the user.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.4 RNC Identity

Full Name
RNC Identity
Abbreviated Name
rncid
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-9
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is the NE identifier, and is coded independently for

each type of NE.
If the NE type is MSCSERVER, SGSN, or MSCSERVER & SGSN,
the value range is 04095. The value of MCC [] + MNC [] + NeId []
cannot be same for different CN nodes.
If the NE type is MGW, the value range is 409665535.
If the NE type is RNC, the value range is 04095.
If the NE type is NODEB, the value range is 065535.
If the NE type is BME, the value range is 065535.
Instance
NE Office
ZWF21-30-021
Iu Flex
Iu Flex FG
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
PLmnNum of rncNeInfo, MCC[8] of rncNeInfo, MNCBcdCodeLen[8]

of rncNeInfo, MNC[8] of rncNeInfo, NeId[8] of rncNeInfo
MCC[8], MNCBcdCodeLen[8], MNC[8], NeId[8] is a list. the max
Parameters
element number of list is 8. the valid element number is PlmNum .
Data Type
long
Parameter Type
Network Planning&Optimization
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the NEID of the NE.
Configuration rule: It is configured according to the network planning

result.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-10
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.1.5 Shared Network Mode

Full Name
Shared Network Mode
Abbreviated Name
sharedNetMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the network sharing mode. There are

three network sharing modes: Gateway Core Network (GWCN),
Multi-Operator Core Network (MOCN), and Multi-PLMN. Both radio
access networks and core networks are shared in GWCN mode.
Only radio access networks are shared in MOCN mode. MOCN and
GWCN belong to shared carrier network sharing, and Multi-PLMN
belongs to dedicated carrier network sharing.
Instance
RNC
ZWF21-30-100
Basic RAN Sharing Support
RAN Sharing FG
0: GWCN
1: MOCN
2: Multi Plmn
0xFF: No Shared Network
Unit
N/A
Default Value
0xFF: No Shared Network
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-11
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter configures the network sharing
mode.
Configuration rule: network sharing mode.
The parameter values are as follows:
MOCN: supports shared carrier and dedicated carrier network
sharing. The RNC is connected to multiple operators' CNs, and
selects operators for UEs that do not support network sharing.
GWCN: supports shared carrier and dedicated carrier network
sharing. The CN can be shared among multiple operators, and
selects operators for UEs that do not support network sharing.
Multi Plmn: only supports dedicated carrier network sharing. The
RNC routes UEs to the operator CN that the cell belongs to.
0xFF: Network sharing is not used. The value must be 0xFF when
the network sharing feature is not licensed.
This parameter is a license parameter, and is closed by default.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.6 Plmn Select Method for MOCN Network Sharing

Full Name
Plmn Select Method for MOCN Network Sharing
Abbreviated Name
plmnSelectMethod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the PLMN selection method, when the

MOCN mode is used for network sharing.
2-12
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-30-103
RAN Sharing with Shared Carrier
RAN Sharing with Shared Carrier FG
0: IMSI-based CS & PS Coordination

1: Random Selection
Unit
N/A
Default Value
0: IMSI-based CS & PS Coordination
Related Parameters
SharedNetMode of rncFunction
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the PLMN selection
method when an MOCN is used for network sharing.

Configuration rule: When an MOCN is used for network sharing, if
PS and CS domain registration coordination is implemented by the
CN, set this parameter to 1. Otherwise, set this parameter to 0.
in most networks, CN dont implemented PS and CS domain
Reason
registration coordination
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.7 Type of Transport Channel for Initial RRC Connection Setup

2-13
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Type of Transport Channel for Initial RRC Connection Setup
Abbreviated Name
initRrcOnDch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the type of transport channel and signaling

rate for initial RRC connection setup.
Instance
RNC
ZWF21-04-004
ZWF21-04-014
ZWF21-01-020
ZWF23-01-041
ZWF26-01-010
Dynamic Radio Bearer Control

Adaptive Radio Bearer
27.2Kbps High Speed Signaling RB
F-DPCH & SRB over HSDPA
Enhanced F-DPCH
Dynamic Radio Bearer Control FG

Adaptive Radio Bearer FG
High Speed Signaling FG
F-DPCH & SRB over HSDPA FG
Enhanced F-DPCH FG
0: Forced to CELL_DCH and Using DCH/DCHLow Rate Signalling

1: Forced to CELL_DCH and Using DCH/DCH with 13.6k Signalling
2: Forced to FACH
3: Not Forced, Using DCH/DCH with DCH/DCH Low Rate Signalling
on Cell_DCH State
4: Not Forced, Using DCH/DCH with 13.6k Signalling on Cell_DCH
State
5: Forced to CELL_DCH and Using DCH/DCH with 27.2k Signalling
6: Not Forced, Using DCH/DCH with 27.2k Signalling on Cell_DCH
State
7: Forced to HSPA
8: Not Forced, Using HSPA Signalling on CELL_DCH state
Unit
N/A
Default Value
Forced to CELL_DCH and Using DCH/DCH with 13.6k Signalling
Related Parameters
N/A
2-14
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the type of the channel and the
signaling rate for initial RRC connection setup.

Related factors: resource usage and call delay.
Adjustment suggestion: High-rate signaling can effectively speed
up the establishment of RRC connection and shorten the call delay.
However, it requires more radio resources than low-rate signaling
does. It is recommended to use high-rate signaling because the
process of establishing a RRC connection is very short.
The default value is set to lower the call delay.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.8 GPS Information Root

Full Name
GPS Information Root
Abbreviated Name
gpsInfoRoot
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates where RNC can get GPS information from.
2-15
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-10-002
LCS with A-GPS
Location Service FG
0: Self
1: Neighbouring RNC;
2: Exterior Network
Unit
N/A
Default Value
Self
Related Parameters
GpsInfoRoot, GpsCardType
Only when GpsInfoRoot set 0 (self), GpsCardType is valid.
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It is used in AGPS positioning. It is configured according to AGPS
information attainment from RNC or reference network.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.9 Duration of Valid Cell Load Info

Full Name
Duration of Valid Cell Load Info
Abbreviated Name
cellLdInfoVldTim
2-16
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.413
Description
This parameter indicates the duration of the inter-sys cells load

information which is valid to use.before updating.
Instance
RNC
ZWF21-03-026
Target cell Load based inter-RAT HO
Target Cell Load Based Inter-RAT HO FG
(0..65535)s, step 1s
Unit
Default Value
600s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
when this parameter is configured, it needs to think of the Load
information Validity in the configured duration.If the duration is too

long, the load information validity is not guaranteed, and if the
duration is too short, the load information can't be fully used.
consider both the Validity and synchronization frequency of the cell
Reason
load.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-17
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.10 Downlink Non-Conversational Service Maximum MAC-d PDU

Size Extended
Full Name
Downlink Non-Conversational Service Maximum MAC-d PDU Size

Extended
Abbreviated Name
nonCMaxPduSize
Managed Object

3GPP Name
Maximum MAC-d PDU Size Extended
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the maximum extended MAC-d PDU Size

in octets for non-conversational services when an extended MAC
level PDU Size is used. The larger the parameter is, the smaller the
header overhead is, and the fewer the resources are occupied, but
the higher the probability of causing PDU transmission mistakes is.
The smaller the parameter is, the larger the header overhead is, and
the more the resources are occupied.
Instance
RNC
ZWF26-01-002
Improved DL L2 Support
HSPA Enhanced L2 FG
(1..1505)bytes, step 1byte
Unit
bytes
Default Value
600
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-18
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: maximum extended MAC-d PDU Size of
non-conversational services.
Related factors: header overhead, and service quality.
The larger the parameter is, the smaller the header overhead is,
so the resources are saved. But when the radio channel quality
becomes poor, PDU transmission mistakes will be caused.
The smaller the parameter is, the larger the header overhead is,
and so it is a waste of resource.
The default parameter value is set based on the header overhead
Reason
and service quality.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.11 Downlink Conversational Service Maximum MAC-d PDU Size

Extended
Full Name
Downlink Conversational Service Maximum MAC-d PDU Size

Extended
Abbreviated Name
cMaxPduSize
Managed Object

3GPP Name
Maximum MAC-d PDU Size Extended
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the maximum number of MAC-D PDU

bytes when the downlink conversational service needs to extend
the size of MAC-D PDU.
Instance
RNC
ZWF26-01-002
2-19
SJ-20141209142030-013|2015-11-12 (R1.3)
HSPA Enhanced L2 FG
Unit
bytes
Default Value
65
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum size of extended MAC-d
PDUs for conversational services.

Related factors: header consumption and quality of service.
If this parameter is set to a greater value, the header consumption is
smaller, and the resources are saved. However, it is likely to cause
PDU transmission errors when the radio channel is in poor quality.
If this parameter is set to a smaller value, the header consumption is
larger, and the resources are wasted.
The default value is set based on head overhead and service quality.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.12 Uplink Conversational Service Maximum Uplink RLC PDU

Size
2-20
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Uplink Conversational Service Maximum Uplink RLC PDU Size
Abbreviated Name
cMaxUlPduSize
Managed Object

3GPP Name
Largest UL RLC PDU size
3GPP Reference
TS 25.331
Description
This parameter indicates the Uplink Conversational service

maximum size in octets of the uplink RLC PDU in the flexible RLC
PDU size mode.
Instance
RNC
ZWF26-02-002
Improved UL L2 support
HSPA Enhanced L2 FG
Unit
bytes
Default Value
124
Related Parameters
CMinUlPduSize of rncFunction
CMaxUlPduSize > CMinUlPduSize
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Uplink conversational service maximum MAC-d PDU
size extended
Related Factor: The header consumption and the quality of service.
The value of the parameter is larger, the header consumption is
smaller, and it saves resources; but it is easier to result in PDU
transmission mistake when the radio channel quality becomes bad.
The value of the parameter is smaller, the header consumption is
larger, and its a waste of resources.
The header consumption and the quality of service are considered
Reason
to define this parameter.
Change Take Effect
New Connection
No
2-21
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.13 Uplink Conversational Service Minimum Uplink RLC PDU

Size
Full Name
Uplink Conversational Service Minimum Uplink RLC PDU Size
Abbreviated Name
cMinUlPduSize
Managed Object

3GPP Name
Minimum UL RLC PDU size
3GPP Reference
TS 25.331
Description
This parameter indicates the Uplink Conversational service

minimum size in octets of the uplink RLC PDU in the flexible RLC
PDU size mode.
Instance
RNC
ZWF26-02-002
HSPA Enhanced L2 FG
Unit
bytes
Default Value
Related Parameters
CMaxUlPduSize of rncFunction
CMaxUlPduSize > CMinUlPduSize
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-22
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: Uplink conversational service minimum MAC-d PDU size
extended
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.14 Uplink Non-Conversational Service Maximum Uplink RLC

PDU Size
Full Name
Uplink Non-Conversational Service Maximum Uplink RLC PDU Size
Abbreviated Name
nonCMaxUlPduSize
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the Uplink Non-Conversational service

maximum size in octets of the uplink RLC PDU in the flexible RLC
PDU size mode.
Instance
RNC
ZWF26-02-002
2-23
SJ-20141209142030-013|2015-11-12 (R1.3)
HSPA Enhanced L2 FG
Unit
bytes
Default Value
244
Related Parameters
NonCMinUlPduSize of rncFunction
NonCMaxUlPduSize > NonCMinUlPduSize
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Uplink non-conversational service maximum MAC-d PDU
size extended
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.15 Uplink Non-Conversational Service Minimum Uplink RLC

PDU Size
Full Name
Uplink Non-Conversational Service Minimum Uplink RLC PDU Size

2-24
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
nonCMinUlPduSize
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the Uplink Non-Conversational service

minimum size in octets of the uplink RLC PDU in the flexible RLC
PDU size mode.
Instance
RNC
ZWF26-02-002
HSPA Enhanced L2 FG
Unit
bytes
Default Value
21
Related Parameters
NonCMaxUlPduSize of rncFunction
NonCMaxUlPduSize > NonCMinUlPduSize
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Uplink non-conversational service minimum MAC-d PDU
size extended
Reason
Change Take Effect
New Connection
No
2-25
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.16 HARQ RV Configuration

Full Name
HARQ RV Configuration
Abbreviated Name
harqRvConfig
Managed Object

3GPP Name
HARQ RV Configuration; HARQ Info for E-DCH
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the RV configuration selected by

RNC when the E-DCH Harq Combining Capability IE in AUDIT
RESPONSE returned by NodeB takes the value of IR and Chase
Combining Capable
Instance
RNC
ZWF25-01-A
HSUPA Introduction Package
HSUPA Introduction FG
0: RV0
1: RV Table
Unit
N/A
Default Value
1: RV Table
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-26
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Function: This parameter indicates the RV configuration selected
by RNC when the E-DCH Harq Combining Capability IE in AUDIT

RESPONSE returned by NodeB takes the value of IR and Chase
Combining Capable.Configuration Rule: According to the gain
comparison between RV0 and RV table.
It is concluded by simulation that using RV table obtains more
retransmission combination gain than using RV0.
It is concluded by simulation that using RV table obtains more
Reason
retransmission combination gain than using RV0. So default value

is set to 'RV Table'.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.17 Maximum Bit Rate with HS-SCCH Less for Non-VoIP/AMR

Full Name
Maximum Bit Rate with HS-SCCH Less for Non-VoIP/AMR
Abbreviated Name
maxRateWithNVHs
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-27
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum bit rate with HS-SCCH Less
for Non-VoIP/AMR.
Non-VoIP/AMR services are allowed to use HS-SCCH Less function
only when the following conditions are all satisfied:
(1) HS-SCCH Less Switch is "On";
(2) HS-SCCH Less Switch for Non-VoIP/AMR is "On";
(3) The assigned maximum bit rate is less than Max Bit Rate with
HS-SCCH Less for Non-VoIP/AMR.
Instance
RNC
ZWF26-01-005
HS-SCCH-less Operation
Continuous Packet Connectivity FG
(16, 32, 64, 128, 256, 384) kbps
Unit
kbps
Default Value
64 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the maximum bit rate with
HS-SCCH Less for Non-VoIP/AMR.

Configuration Rule: Considering together cell and service
throughput, gain brought by HS-SCCH Less.
If This parameter is set too large, code number will become the
bottleneck and transmission power will increase so as to make the
user throughput and cell throughput decrease.If the parameter is too
small, the advantage of the HS-SCCH less will be not obvious.
Considering together cell and service throughput, gain brought by
Reason
HS-SCCH Less.
Change Take Effect
New Connection
No
How to Impact
N/A
2-28
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.1.18 Emergency Call Redirect Switch

Full Name
Emergency Call Redirect Switch
Abbreviated Name
emgCallRdtSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the RRC Redirect for emergency call

function switch.
Instance
RNC
ZWF21-01-021
ZWF21-10-003
RRC Connection Redirect

Emergency Call Re-direct to GSM
Connection Management FG
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-29
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: the switch of the emergency call RRC
redirection function.
Parameter controlling factor: If GSM can provide more accurate
location service, this parameter can be set to 1 for higher location
quality, or else it shall be set to 0.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.19 Inter-RAT V1+V2 Amr Cut Decision

Full Name
Inter-RAT V1+V2 Amr Cut Decision
Abbreviated Name
interRatV1V2AmrCut
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Specifies the Amr cut decision when IuUP version including V1+V2
in the inter-RAT case
Instance
RNC
ZWF21-04-005
AMR Rate Controlling
NB-AMR Rate Control FG

WB-AMR Rate Control FG
1: cut
2: not cut
Unit
N/A
2-30
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
1: cut
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Function: This parameter specifies the Amr cut decision when IuUP
version including V1+V2 in the inter-RAT case.

Configuration Rule: The parameter indicates whether to cut AMR
set or not when both Verion1 and Version2 are supported by the CN
during the 2G to 3G Relocation procedure.
Cutting Amr set is more compatible for inter-RAT cases.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.20 Intra-RAT V1+V2 Amr Cut Decision

Full Name
Intra-RAT V1+V2 Amr Cut Decision
Abbreviated Name
intraRatV1V2AmrCut
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-31
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
Specifies the Amr cut decision when IuUP version including V1+V2
in the intra-RAT case
Instance
RNC
ZWF21-04-005
ZWF21-04-014


1: cut
2: not cut
Unit
N/A
Default Value
2: not cut
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Function: This parameter specifies the Amr cut decision when IuUP
version including V1+V2 in the intra-RAT case.

Configuration Rule: The parameter indicates whether to cut AMR
set or not when both Verion1 and Version2 are supported by the CN
in the RAB assignment or intra system Relocation procedure.
For intra-RAT cases, usually, the related equipment are our
Reason
products, so not cutting Amr is selected.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-32
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.1.21 Switch of Non Emergency CS Service Access to CELL_FACH

On RRC
Full Name
Switch of Non Emergency CS Service Access to CELL_FACH On

RRC
Abbreviated Name
csRrcOnFachSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether non-emergency CS service

access to CELL_FACH on RRC process is supported. If this switch
is "Off": RRC connection of the non-emergency CS service cannot
be created on FACH/RACH or HS-DSCH/RACH.
Instance
RNC
ZWF21-04-004
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
InitRrcOnDch of rncFunction
When InitRrcOnDch is set to 2 (Forced to FACH), this parameter is
Parameters
invalid.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-33
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets whether to establish RRC connection
of non-emergent conversational class service on the Cell_FACH

channel.
Related factors: user experience and the successful ratio of RRC
connection.
This parameter is introduced for IPHONE, when RRC connection
is established in FACH status, and after the conversational class
service is establieshed it is switched from Cell_FACH to Cell_DCH,
there will be noise.
Configuration rule: If the switch is on, if the RRC connection fails to
be established in DCH status, the RRC connection attempts to be
established in the Cell_FACH status, which increases the successful
ratio of RRC connection, but IPHONE noises cannot be avoided.
If the switch is off, if the RRC connection fails to be established in
DCH status, non-emergent RRC connection is not allowed to be
established in Cell_FACH status, which decreases the successful
ratio of RRC connection, but IPHONE noises can be removed.
The default value is set to on to improve the success rate of RRC
Reason
connections.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.22 Timer for Shifting Inter-frequency Measurement and

Inter-RAT Measurement
Full Name
Timer for Shifting Inter-frequency Measurement and Inter-RAT

Measurement
Abbreviated Name
t4ShifIfLteGsmMea
Managed Object

2-34
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the interval between the events that

the RNC performs inter-frequency measurement, GSM inter-RAT
measurement and EUTRAN inter-RAT measurement.
When inter-frequency is prior to inter-RAT, the timer is initialized
after the RNC performs inter-frequency measurement. If the quality
of non-used frequency is poor within the timer duration, the RNC will
perform inter-RAT measurement.
When EUTRAN inter-RAT is prior to inter-frequency, the timer is
initialized after the RNC performs EUTRAN inter-RAT measurement.
If the timer is expiry, the RNC will perform inter-frequency
measurement.
Instance
RNC
ZWF21-03-003
ZWF21-03-004
ZWF21-03-110
Inter-Frequency Hard Handover

Inter-RAT Mobility
Handover with LTE
Handover Control FG
Handover with LTE FG
1..20, step 1
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-35
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: timer of stopping the current measurement and
starting another measurement after inter-frequency measurement or

EUTRAN inter-RAT measurement is activated.
Related factors: service performance
The smaller the parameter is, the easier it is for RNC to stop the
current measurement and start another measurement.
The larger the parameter is, the harder it is for RNC to stop the
current measurement and start another measurement.
Adjustment suggestion:
In some special scenarios where UEs can't report inter-frequency
or EUTRAN inter-RAT measurement, this parameter should be
set to an appropriate value, so that UEs can be handed over to
another frequency or system neighboring cell, the startup time of
compressed mode can be reduced, and call drop can be avoided.
The default parameter value is set based on the start time of
Reason
compressed mode and service performance.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.1.23 DC-HSDPA Redirection Strategy Switch

Full Name
DC-HSDPA Redirection Strategy Switch
Abbreviated Name
dcRedirectStaSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-36
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the DC redirection policy switch. If the

switch is "On", and the UE supports DC but the current cell does
not, then the RNC will redirect the UE to another frequency that
supports DC through the RRC Connection Reject procedure.
Instance
RNC
ZWF26-02-004
DC-HSDPA
DC-HSDPA FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: dual carrier redirection policy switch.
Effect:
When the switch is "On", UEs can be redirected to an adjacent cell
that supports DC-HSDPA, which can provide better user experience.
When the switch is "Off", UEs cannot be redirected to an adjacent
cell that supports DC-HSDPA.
The default parameter value is set based on the actual networking
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-37
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.24 the Release UE Number when Band Exceeds Limit

Full Name
the Release UE Number when Band Exceeds Limit
Abbreviated Name
bwOvldRelUeNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of UE in a cell whose

transport resource will be released while transport path is overload.
Instance
RNC
ZWF21-04-010
Congestion Control
Congestion Control FG
0..255, 255 means resource release is not limited by UE number

when band limitation is exceeded.
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the maximum number of UE
in a cell whose transport resource will be released while transport

path is overload.
Configuration Rule: The parameter should be set according to the
actual configuration of the transport resource.
The parameter should be set according to the actual configuration
Reason
of the transport resource.
Change Take Effect
New Connection
No
2-38
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
It will be changed that the maximum number of UE in a cell whose

transport resource will be released while transport path is overload.
Access
Read/Write
OMC Access path
N/A
N/A
2.1.25 Maximum Number of Retransmissions of the RRC

CONNECTION SETUP
Full Name
Maximum Number of Retransmissions of the RRC CONNECTION

SETUP
Abbreviated Name
rrcSetupRetraNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates maximum number of retransmissions of

the RRC CONNECTION SEUTP message
Instance
RNC
ZWF21-01-002
Connection Setup and Release
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-39
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter indicates the value of the timer that specifies the
RNC waiting time for the response after the RNC sends an RRC
CONNECTION SETUP message.
The timer is started when the RNC sends an RRC CONNECTION
SETUP message, and stopped on receipt of an RRC CONNECTION
SETUP COMPLETE message sent by the UE.
At expiry of this timer, if the number of RRC CONNECTION SETUP
retransmissions has not exceeded the RrcSetupRetraNum (the
threshold value), the RNC will resend the RRC CONNECTION
SETUP message. Otherwise, the RNC will release the RRC
connection of this UE.
The default value is 2 times, which is set based on the reception
Reason
probability of the UE, number of RRC CONNECTION SETUP

messages over the Uu interface, and the system capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.26 Interval of Retransmission of RRC CONNECTION SETUP

Full Name
Interval of Retransmission of RRC CONNECTION SETUP
Abbreviated Name
tRrcSetupRetran
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-40
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
RNC waiting time for the response after the RNC sends an RRC
CONNECTION SETUP message.
SETUP message, and stopped on receipt of an RRC CONNECTION
SETUP COMPLETE message sent by the UE.
At expiry of this timer, if the number of RRC CONNECTION SETUP
retransmissions has not exceeded the RrcSetupRetraNum (the
threshold value), the RNC will resend the RRC CONNECTION
SETUP message. Otherwise, the RNC will release the RRC
connection of this UE.
Instance
RNC
ZWF21-01-002
0..100, step 1; Unit: 100ms
Unit
100ms
Default Value
700ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the timer interval for
resending the next RRC CONNECTION SETUP after the first RRC
CONNECTION SETUP is sent.
Related factors: RRC CONNECTION SETUP reception probability
of the UE, number of RRC CONNECTION SETUP messages over
the Uu interface, and the system capacity.
Configuration rule: if this parameter value is too low, the Uu
interface will have excessive messages, leading to higher system
consumption. And the UE has more chance to receive the RRC
CONNECTION SETUP message. If this parameter value is too
high, the system consumption is lower, but the UE has less chance
to receive the RRC CONNECTION SETUP message. And the
success rate of RRC establishment will be lower.
2-41
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is 700 ms, which is set based on the reception
Reason
probability of the UE, number of RRC CONNECTION SETUP

messages over the Uu interface, and the system capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

CONNECTION RELEASE COMPLETE Message (N308)
Full Name

RELEASE COMPLETE Message (N308)
Abbreviated Name
n308
Managed Object

3GPP Name
N308
3GPP Reference
TS 25.331
Description
This parameter indicates the maximum number of retransmissions

of the RRC CONNECTION RELEASE COMPLETE message.
Instance
RNC
ZWF21-01-001
System Information Broadcasting
1..8
Unit
N/A
Default Value
Related Parameters
N/A
2-42
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: the maximum number of retransmissions of the
RRC CONNECTION RELEASE COMPLETE message.

Related factors: success rate and time delay of RRC connection
release.
A larger parameter value helps to increase the success rate of
RRC connection release, but may cause excessive message
retransmission on the Uu interface and longer time delay in RRC
connection release.
A smaller parameter value helps to reduce the volume of messages
retransmitted on the Uu interface, decrease the time delay in RRC
connection release, and allow a UE to return to IDLE mode soon,
but may cause a lower success rate of RRC connection release.
The default value is set based on the success rate and time delay of
Reason
RRC connection release.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

CONNECTION RELEASE Message
Full Name

RELEASE Message
Abbreviated Name
nReTran
2-43
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of times that the

RRC CONNECTION RELEASE message is retransmitted.
Instance
RNC
ZWF21-01-002
1..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum number
of times that the RRC CONNECTION RELEASE is retransmitted.

Related factors: RRC CONNECTION RELEASE reception
probability of the UE, number of messages on the Uu interface,
and the system capacity.
Configuration rule: if the parameter value is too high, the Uu
interface will have excessive messages, leading to high system
resource consumption. If the parameter value is too low, the UE
cannot receive RRC CONNECTION RELEASE in time due to the
lower reception probability, and cannot release the resources in
time, which may affect the initializing of subsequent services.
If the RNC cannot receive RRC CONNECTION RELEASE
COMPLETE within 500ms after the RNC resends RRC
CONNECTION RELEASE for NreTran times, the RNC considers
that the RRC connection has been released, and then it will releases
local resources.
2-44
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is 3 times, which is set based on the reception
Reason
probability of the UE, number of messages on the Uu interface,

and the system capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.29 Max CS Delay

Full Name
Max CS Delay
Abbreviated Name
maxCsDelay
Managed Object

3GPP Name
Max CS Delay
3GPP Reference
TS 25.331
Description
This parameter indicates the time of determining the maximum

buffering of the voice frames in PDCP when CS voice is carried on
HS-DSCH/E-DCH. If the data cannot be transferred in time when
CS counter times out, the data packet will be discarded.
Instance
RNC
ZWF26-02-005
CS over HSPA
CS over HSPA FG
(20..200)ms, step 10ms
Unit
ms
Default Value
60ms
Related Parameters
N/A
2-45
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum buffering delay for the CS
voice service over the HSPA.

Related factor: quality of service .
This parameter is used to help UE for jitter management of voice
frames.
Configuration rule: If the value of this parameter is too large, the
maximum time delay on the PDCP layer becomes longer, which
affects the CS voice service quality.
If the value of this parameter is too small, the maximum time delay
on the PDCP layer becomes shorter.
Because of CS12. 2K services are sent every 20 ms periodically,
Reason
and three packets are sent together. Therefore, the value of this
parameter is 60 ms.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.30 Delay Time Threshold of D/D->HS/D or HS/E after HS/D or

HS/E ->D/D
Full Name
Delay Time Threshold of D/D->HS/D or HS/E after HS/D or HS/E

->D/D
Abbreviated Name
dToHsDelayThr
Managed Object

2-46
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
A timer is started after the channel quality or traffic triggers switching

from HS-DSCH/E-DCH or HS-DSCH/DCH to DCH/DCH. After
the timer expires, switching from DCH/DCH to HS-DSCH/E-DCH
or HS-DSCH/DCH is allowed. This parameter indicates the timer
duration.
Instance
RNC
ZWF21-05-026
Service Optimization for Multi-RAB
Voice service Optimization for Multi-RAB FG
(0..65535)s, step 1s
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the delay time for switching from switching
from DCH/DCH to HS-DSCH/E-DCH or HS-DSCH/DCH after

switching from HS-DSCH/E-DCH or HS-DSCH/DCH to DCH/DCH
is triggered.
Related factors: user experience and dropped-call rate.
Configuration rule: If this parameter is set to a smaller value, it is
easier to trigger switching from DCH/DCH to HS-DSCH/E-DCH or
HS-DSCH/DCH based on the traffic volume after switching from
HS-DSCH/E-DCH or HS-DSCH/DCH to DCH/DCH is triggered, and
it is easier to cause the ping-pong adjustment and increase the
dropped-call rate.
If this parameter is set to a larger value, it is more difficult to trigger
switching from DCH/DCH to HS-DSCH/E-DCH or HS-DSCH/DCH
based on the traffic volume after switching from HS-DSCH/E-DCH
or HS-DSCH/DCH to DCH/DCH is triggered, which affects the user
experience.
2-47
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on user experience and the risk of
Reason
call drops.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.31 Wait Timer for Adjusting Uplink and Downlink

Reconfiguration by One Step Upward
Full Name
Wait Timer for Adjusting Uplink and Downlink Reconfiguration by

One Step Upward
Abbreviated Name
upUdRecfgTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates when uplink or downlink meets the

requirements for rate adjustment (increase), the wait timer for
waiting the opposite direction reconfiguration by one step.
Instance
RNC
ZWF21-04-004
0..65535, step 1; Unit: 100ms
Unit
100ms
Default Value
30
Related Parameters
N/A
2-48
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the wait timer for increase rate of uplink
and downlink reconfiguration by one step. You can reduce the

number of times of reconfiguration.
Related factors: number of times of reconfiguration and user
experience.
Configuration rule: If this parameter is set to a larger value, it is
easier to trigger uplink and downlink reconfiguration by one step,
and reduce the times of reconfigurations, but the responses to user
traffic requirements are also slower, and it is more difficult to trigger
rate increase, which affects the user experience.
If this parameter is set to a smaller value, it is more difficult to trigger
uplink and downlink reconfiguration by one step, but the responses
to user traffic requirements become faster, and it is easier to trigger
rate increase, which improves the user experience.
The default value takes reconfiguration times and user experience
Reason
into consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.32 Wait Timer for Adjusting Uplink and Downlink

Reconfiguration by One Step Downward
Full Name
Wait Timer for Adjusting Uplink and Downlink Reconfiguration by

One Step Downward
2-49
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
dnUdRecfgTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates when uplink or downlink meets the

requirements for rate adjustment (reduce) first, it is the waiting timer
for waiting the opposite direction reconfiguration by one step.
Instance
RNC
ZWF21-04-004
0..65535, step 1; Unit: 100ms
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the wait timer for decrease rate of uplink
and downlink reconfiguration by one step, which can reduce the

number of times of reconfiguration.
Related factors: times of reconfiguration and resource usage.
Configuration rule: If this parameter is set to a larger value, it
is easier to trigger uplink and downlink reconfiguration by one
step, and reduce the number of times of reconfigurations, but the
response to user traffic requirement becomes slower, it is more
difficult to trigger rate decrease, and the resource usage is affected.
If this parameter is set to a smaller value, it is more difficult to trigger
uplink and downlink reconfiguration by one step, but the responses
to user traffic requirements become faster, it is easier to trigger rate
decrease, and the resource usage is high.
The default value is set based on reconfiguration times and resource
Reason
utilization.
2-50
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.33 Wait Time for RADIO BEARER RECONFIGURATION

COMPLETE when CELL_DCH to CELL_FACH
Full Name
Wait Time for RADIO BEARER RECONFIGURATION COMPLETE

when CELL_DCH to CELL_FACH
Abbreviated Name
tRbRecfgCmpDtoF
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time period when an RNC

waits to receive the RADIO BEARER RECONFIGURATION
COMPLETE message from the air interface when the RNC
initiates a reconfiguration for a UE to transfer from CELL_DCH to
CELL_FACH.
Instance
RNC
N/A
N/A
(1..60)s, step 1s
Unit
Default Value
15s
Related Parameters
N/A
2-51
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: wait time for an RNC to receive the RADIO
BEARER RECONFIGURATION COMPLETE message from the air

interface when the RNC initiates a reconfiguration for the UE to
transfer from CELL_DCH to CELL_FACH.
Related factors: round-trip time delay between the UE and UTRAN,
success rate and time delay of RRC status transferring.
A larger parameter value helps to improve the success rate of
RRC status transferring, but may cause longer waiting time and
time delay.
A smaller parameter value helps to reduce wait time and time delay,
but may cause lower success rate of RRC status transferring.
The default value is set based on the round-trip time delay between
Reason
the UE and UTRAN, success rate and time delay of RRC status
transferring.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.34 IU Uplink in Sequence Delivery Indicator whether According

to Indication from CN
Full Name
IU Uplink in Sequence Delivery Indicator whether According to

Indication from CN
Abbreviated Name
iuUlInSeqDlvInd
2-52
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether Iu uplink data is delivered in

sequence based on indication of RAB assignment from CN. While
Instance
RNC
ZWF22-03-017
QoS Based Route
RNC IP UTRAN FG
0: false
1: true
Unit
N/A
Default Value
1: true
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The function of the parameter is to get configuration of sending
IUPS data in order from CN

The parameter is configured to be consistent with CN configuration
of sending IUPS data
If the value of the parameter is up to cn, RNC will follow CN's
indication of IUPS data in order
If the value of the parameter is not up to cn, RNC will decide to send
IUPS data in order by OMCR's configuration
Packets of IU service are defined by CN is preferred.
Reason
Change Take Effect
Ongoing Connection(at new RAB)
No
How to Impact
N/A
2-53
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.1.35 Lcs over Iur Support Indicator

Full Name
Lcs over Iur Support Indicator
Abbreviated Name
rncLcsOverIurSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
his parameter indicates if RNC supports UE location measurement

over Iur interface in LCS Function.
Instance
RNC
ZWF21-10-005
LCS over Iur
Location Service FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
when this parameter is configured, it needs to consider that if RNC
require ue to report the location measurement result when the UE

has radio link in DRNC.
2-54
SJ-20141209142030-013|2015-11-12 (R1.3)
This function is decided by Users.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.36 MBMS Multicast Mode Support Indicator

Full Name
MBMS Multicast Mode Support Indicator
Abbreviated Name
multicastSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter indicates if RNC supports MBMS Multicast Mode
Instance
RNC
ZWF24-01-003
MBMS Multicast Mode
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-55
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates if RNC supports MBMS Multicast
Mode.
Configuration: If RNC supports MBMS Multicast function, the value
should be set to "Support"
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.37 MBMS Enhanced Broadcast Mode Support Indicator

Full Name
MBMS Enhanced Broadcast Mode Support Indicator
Abbreviated Name
eBroadcastSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter indicates whether the RNC supports MBMS

enhanced broadcast mode (broadcast with a counting procedure).
Based on the number of MBMS UEs that receive broadcast services
in enhanced broadcast mode, the RNC determines the transmission
mode to be used (PTP or PTM).
Counting-free broadcast services can only use PTM transmission
mode.
2-56
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF24-02-002
MBMS Enhanced Broadcast Mode
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether to support MBMS enhanced
broadcast.
Related factors: downlink code resources, power resources, and
number of users who receive the broadcast service.
If this function is not enabled, the broadcast service is transmitted
only in PTM mode. In PTM mode, to ensure the QoS, the FACH
channel that carries MBMS services has a stronger downlink
transmission power. If the number of users who receive the
broadcast service is limited, the transmission power is wasted.
If this function is enabled, when the number of users is limited,
the PTP transmission mode is used, which means that users use
their dedicated resources (DCH or HS-DSCH) in a cell to receive
the broadcast service. The resource used by each user is smaller
than that in the PTM mode. If a large number of users receive the
broadcast service, the dedicated channel cannot be used because
the total radio resources required by the dedicated channel will
exceed the resources required by the common channel. In this
case, the transmission mode is switched over to PTM.
If MBMS is not configured, this parameter is invalid.
N/A
Reason
Change Take Effect
No
0
2-57
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.38 MBMS over Iur Support Indicator

Full Name
MBMS over Iur Support Indicator
Abbreviated Name
mbmsIurSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter indicates if RNC supports MBMS UE registration

over Iur function.
Instance
RNC
ZWF24-02-005
MBMS over Iur
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-58
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates whether RNC supports MBMS
UE registration over Iur function.

Configuration Rule: If RNC supports MBMS UE registration over Iur
function, the value should be set to "Support"
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.39 MBMS Channel Rate Support Indicator (8kbps)

Full Name
MBMS Channel Rate Support Indicator (8kbps)
Abbreviated Name
mbms8kRateSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether 8 kbps channel parameters for

MBMS services in PTM transmission mode are supported.
Instance
RNC
ZWF24-01-001
MBMS Services
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
2-59
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: it indicates whether 8 kbps channel parameters
for MBMS services in PTM transmission mode is supported.

Related factors: It should be configured based on the rate of the
required MBMS services.
This parameter is set to "Not Support" by default.
Reason
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
mbms16kRateSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
2-60
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF24-10-001
MBMS 16kbps Channel Rate
MBMS FG
0: Not Support
1: Support 256k MBMS Service)/Support 256k MBMS Service)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: it indicates whether 16 kbps channel
parameters for MBMS services in PTM transmission mode is

supported.
Related factorse: It should be configured based on the rate of the
Reason
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
2-61
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
mbms32kRateSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF24-10-002
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

supported.
Reason
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
2-62
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
mbms64kRateSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF24-10-003
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

supported.
2-63
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
mbms128kRateSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF24-10-004
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-64
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A

supported.
Reason
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
mbms256kRateSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF24-10-005
MBMS FG
2-65
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Supported
1: Supported
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

supported.
Reason
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.45 Cpich Ec/No Minimum Threshold for Intra-Frequency

Handover
Full Name
Cpich Ec/No Minimum Threshold for Intra-Frequency Handover
Abbreviated Name
intraHoEcNoThrd
Managed Object
2-66
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum Cpich EcNo threshold for

intra-frequency handovers. If the reported Cpich EcNo is lower than
IntraHoEcNoThrd or Cpich RSCP is lower than IntraHoRscpThrd,
no intra-frequency handover will be triggered.
Instance
RNC
ZWF21-03-050
Handover Optimization in Weak Coverage
Handover Optimization in Weak Coverage FG
(-24 0)dB step by 1dB
Unit
dB
Default Value
-15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Cpich Ec/N0 minimum threshold for
intra-frequency handover
If the reported Cpich EcNo is lower than IntraHoEcNoThrd or Cpich
RSCP is lower than IntraHoRscpThrd, intra-frequency handover
will not be triggered.
Related factors: user experience and network features
If this parameter is too small, it is easier for UEs to hand over, but
handover failures may occur.
If this parameter is too large, it is more difficult for UEs to hand over,
but call drop may occur.
The default parameter value is set based on the network planning
Reason
and user experience.
Change Take Effect
No
2-67
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.46 Cpich Rscp Minimum Threshold for Intra-Frequency

Handover
Full Name
Cpich Rscp Minimum Threshold for Intra-Frequency Handover
Abbreviated Name
intraHoRscpThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

IntraHoEcNoThrd or Cpich RSCP is lower than IntraHoRscpThrd,
no intra-frequency handover will be triggered.
Instance
RNC
ZWF21-03-050
(-115-25)dBm, step by 1dBm
Unit
dBm
Default Value
-108
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-68
SJ-20141209142030-013|2015-11-12 (R1.3)
intra-frequency handover
If the reported Cpich EcNo is lower than IntraHoEcNoThrd or Cpich
RSCP is lower than IntraHoRscpThrd, intra-frequency handover
will not be triggered.
If this parameter is too small, it is easier for UEs to hand over, but
handover failures may occur.
If this parameter is too large, it is more difficult for UEs to hand over,
but call drop may occur.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.47 Timer for State Query

Full Name
Timer for State Query
Abbreviated Name
tcnquery
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for State Query.

When in FAIL status, the CN Monitor Module should check the
signaling point and user service status periodically according to
timer Tcnquery.
Instance
RNC
N/A
2-69
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
10..6000, step 1; Unit: 100ms
Unit
100ms
Default Value
1800
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the timer for CN
Restore.
Related factors: IU interface parameter.
The greater the parameter value, the longer the responding time
when the CN is inaccessible.
The greater the parameter value, the shorter the responding time
when the CN is inaccessible.
The default value of this parameter corresponds to that set on the
Reason
ZTE-CN. This parameter can also be set as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.48 CBS Function Switch

Full Name
CBS Function Switch
Abbreviated Name
cbsSwitch
2-70
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for the Cell Broadcast Service
(CBS) function. If it is set to "1" (On), the RNC supports the CBS
function. If it is set to "0" (Off), the RNC does not support the CBS
function.
Instance
RNC
ZWF21-02-025
Cell Broadcast Service
Cell Broadcast Service FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: RNC-level switch for the CBS function.
Configuration rule: This parameter should be set to "1" (On) if the

operator purchases this feature.
Adjustment suggestion: When this function is enabled, the RNC
allows the cell broadcast service to be provided.
This is a license parameter and should be set based on the
Reason
requirements of an operator.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-71
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.1.49 Time of Arrival Window Startpoint for PCH

Full Name
Time of Arrival Window Startpoint for PCH
Abbreviated Name
pchToAWS
Managed Object

3GPP Name
ToAWS
3GPP Reference
TS 25.433
Description
Time of Arrival Window Startpoint (TOAWS) is the window startpoint.

DL DATA FRAMES are expected to be received after this window
endpoint. A data frame arriving before TOAWS gives a TIMING
ADJUSTMENT control frame response to the RNC and the downlink
data frame may be discarded by the NodeB.
This parameter and the parameter UIubLink.timeDelayJitter
determine the earliest acceptable arrival time of PCH data frames
(such as paging) in a NodeB of the RNC.
Instance
RNC
ZWF21-03-005
Cell Selection & Re-Selection
NodeB Management FG
(0..1279)ms, step 1ms
Unit
ms
Default Value
44ms
Related Parameters
TOAWS
The FACH TOAWS and PCH TOAWS MUST be configured to be
Parameters
the same value in one CELL.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-72
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter is configured in accordance with the ability that the
RNC/NodeB processes PCH data frames.

If the value is too small, the RNC cannot send downlink PCH data
frames to the NodeB in time, and the probability that PCH data
(such as paging type1) is successfully sent on the Uu interface will
decrease.
If the value is too large, downlink PCH frames will be stored in the
RNC/NodeB for a long time, and the delay of PCH data (such as
paging type1) will be increased.
The default is set in accordance with the ability that the RNC/NODEB
Reason
processes PCH data frames.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.50 Time of Arrival Window Endpoint for PCH

Full Name
Time of Arrival Window Endpoint for PCH
Abbreviated Name
pchToAWE
Managed Object

3GPP Name
ToAWE
3GPP Reference
TS 25.433
Description
Time of Arrival Window Endpoint (TOAWE) is the window endpoint.

DL DATA FRAMES are expected to be received before this window
endpoint. A data frame arriving after TOAWE gives a TIMING
This parameter controls the latest acceptable arrival time of PCH
data frames (such as paging) in a NodeB of the RNC.
2-73
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-03-005
NodeB Management FG
(0..2559)ms, step 1ms
Unit
ms
Default Value
8ms
Related Parameters
TOAWE
The FACH TOAWE and PCH TOAWE MUST be configured to be
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
NodeB processes PCH data frames.

If the value is too small, the NodeB cannot process downlink PCH
data frames in time, and the probability that PCH data (such as
paging type1) is successfully sent on the Uu interface will decrease.
If the value is too large, downlink PCH frames will be stored in the
NodeB for a long time, and the delay of PCH data (such as paging
type1) will be increased.
The default is set in accordance with the ability that the NODEB
Reason
processes PCH data frames.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-74
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.51 Time of Arrival Window Startpoint for FACH

Full Name
Time of Arrival Window Startpoint for FACH
Abbreviated Name
fachToAWS
Managed Object

3GPP Name
ToAWS
3GPP Reference
TS 25.433
Description

startpoint. A data frame arriving before TOAWS gives a TIMING
This parameter and the parameter UIubLink.timeDelayJitter
determine the earliest acceptable arrival time of a FACH DATA FP
in a NodeB of the RNC.
Instance
RNC
ZWF21-03-005
NodeB Management FG
(0..1279)ms, step 1ms
Unit
ms
Default Value
44ms
Related Parameters
TOAWS
The FACH TOAWS and PCH TOAWS MUST be configured to be
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-75
SJ-20141209142030-013|2015-11-12 (R1.3)
RNC/NodeB processes FACH data frames.

If the value is too small, the RNC cannot send downlink FACH data
frames to the NodeB in time, and the quality of service over the
FACH common transport channel will decline. For example, the
downlink throughput in CELL_FACH state and the RRC CONN
SETUP success ratio will be decreased.
If the value is too large, downlink data will be stored in the
RNC/NodeB for a long time, and the delay of service over the FACH
common transport channel will be increased. For example, the
delay of downlink data in CELL_FACH state will be increased.
The default is set in accordance with the ability that the RNC/NODEB
Reason
processes FACH data frames.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.52 Time of Arrival Window Endpoint for FACH

Full Name
Time of Arrival Window Endpoint for FACH
Abbreviated Name
fachToAWE
Managed Object

3GPP Name
ToAWE
3GPP Reference
TS 25.433
2-76
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

This parameter controls the latest acceptable arrival time of a FACH
DATA FP in a NodeB of the RNC.
Instance
RNC
ZWF21-03-005
NodeB Management FG
(0..2559)ms, step 1ms
Unit
ms
Default Value
8ms
Related Parameters
TOAWE
The FACH TOAWE and PCH TOAWE MUST be configured to be
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
NodeB processes FACH data frames.

If the value is too small, the NodeB cannot process downlink FACH
data frames in time, and the quality of service over the FACH
common transport channel will decline. For example, the downlink
throughput in CELL_FACH state and the RRC CONN SETUP
success ratio will be decreased.
If the value is too large, downlink FACH data frames will be stored in
the NodeB for a long time, and the delay of service over the FACH
common transport channel will be increased. For example, the
delay of downlink data in CELL_FACH state will be increased.
The default is set in accordance with the ability that the NODEB
Reason
processes FACH data frames.
Change Take Effect
No
2-77
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.53 Inactivity Time of E_FACH Transmission (T321)

Full Name
Inactivity Time of E_FACH Transmission (T321)
Abbreviated Name
t321
Managed Object

3GPP Name
T321
3GPP Reference
TS 25.331
Description
This parameter indicates when the deactivation time of DRX is used,

the UE enters the E-FACH status, if timeout happens.
Instance
RNC
ZWF26-02-006
Enhanced UE DRX
Enhanced UE DRX FG
(100, 200, 400, 800)
Unit
ms
Default Value
200ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-78
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the deactivation time of E_FACH
transmission.
Related factors: UE power consumption and user experience.
If this parameter is set to a greater value, it is more difficult for
the UE to enter the discontinuous reception state, and the UE
consumes more power.
If this parameter is set to a smaller value, it is easier for the UE to
enter the discontinuous reception state and the UE consumes less
power. However, the user experience may be affected.
The default value takes Ue power consumption and user experience
Reason
into consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.54 Cycle Length of Discontinue Receiving of E-FACH

Full Name
Cycle Length of Discontinue Receiving of E-FACH
Abbreviated Name
drxCycleLength
Managed Object

3GPP Name
HS-DSCH DRX cycleFACH
3GPP Reference
TS 25.331
Description
This parameter indicates the lengths of the periods that are not
received continuously in the E-FACH DRX status.
Instance
RNC
ZWF26-02-006
Enhanced UE DRX
Enhanced UE DRX FG
2-79
SJ-20141209142030-013|2015-11-12 (R1.3)
(4, 8, 16, 32 )frames
Unit
frames
Default Value
8frames
Related Parameters
RxBurstlength of rncFunction
RxBurstlength<DrxCycleLength
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the period of the discontinuous reception.

If this parameter is set to a greater value, the period of discontinuous
reception is longer, and the UE consumes less power. However, the
user experience may be affected.
If this parameter is set to a smaller value, the period of discontinuous
reception is shorter, and the user experience is better. In this case,
the UE consumes more power.
Reason
into consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.55 Length of Receiving Frames in E-FACH DRX

Full Name
Length of Receiving Frames in E-FACH DRX
Abbreviated Name
rxBurstlength
Managed Object

2-80
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
HS-DSCH Rx burstFACH
3GPP Reference
TS 25.331
Description
This parameter indicates the received frames of each DRX cycle

length period. In E-FACH DRX status, this parameter indicates the
received frame length in the discontinuous transmission period.
Instance
RNC
ZWF26-02-006
Enhanced UE DRX
Enhanced UE DRX FG
(1, 2, 4, 8, 16) frames
Unit
frames
Default Value
4frames
Related Parameters
DrxCycleLength of rncFunction
RxBurstlength< DrxCycleLength
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the period of discontinuous reception.

If this parameter is set to a greater value, the number of frames
received in the discontinuous reception period is larger, and the user
experience is better. In this case, the UE consumes more power.
If this parameter is set to a smaller value, the number of frames
received in the discontinuous reception is smaller, and the UE
consumes less power. However, the user experience may be
affected.
Reason
into consideration.
Change Take Effect
No
How to Impact
N/A
2-81
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.1.56 Indication of UE with Enhanced DRX

Full Name
Indication of UE with Enhanced DRX
Abbreviated Name
ueDrxInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates whether the discontinuous receiving of

E_FACH can be used by all E_FACH users.
The value"0"means only UL E_FACH user can use DRX.
The value"1"means all UL E_FACH user can use DRX.
Instance
RNC
ZWF26-02-006
Enhanced UE DRX
Enhanced UE DRX FG
0: only UL E_Fach UE support

1: support all E_FACH
Unit
N/A
Default Value
1: support all E_FACH
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-82
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the indication of UE using DRX.
The recommended value is 1, so that all E_FACH UEs using DRX

can consume less power when the Enhanced DRX function is used.
The default value takes E-FACH status and Ue power consumption
Reason
into consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.57 Timer for IU Release Resource

Full Name
Timer for IU Release Resource
Abbreviated Name
tiureldelay
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time delay for releasing the resources
in the Iu interface.
Time1 indicates the time point that the RNC receives the CN
DOWNLINK DIRECT TRANSFER message or the UE UPLINK
DIRECT TRANSFER message, and Time2 indicates the time point
that the RNC receives the IU RELEASE COMMAND message from
CN.
If Time2-Time1>=IuRelDelay, then the RNC will release the Iu
interface resource after receiving the IU RELEASE COMMAND
message. If Time2-Time1<IuRelDelay, the RNC will set a timer
whose value is IuRelDelay- (Time2-Time1), and release Iu resources
after the timer expires.
Instance
RNC
2-83
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-01-004
NAS Message Transfer
1..50, step 1; Unit: 100ms
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the time delay for
releasing the resources in the Iu interface.

Related factors: time interval for receiving the CN IuRelCmd after
the RNC receives the CN downlink direct transmission message or
the UE uplink direct transmission message.
Configuration rule: if this parameter value is too small, the resources
in the Iu interface will be released too fast, which makes the
processing failure of the UE direct transmission such as location
update failure. Subsequently, the PS paging establishment may fail.
If this parameter value is too high, the resource in the Iu interface
will be released too slowly, decreasing the resource utilization in
the Iu interface.
The default value is 300 ms, which is set based on the on-site
Reason
testing result.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-84
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.58 UTRAN DRX Cycle Length Coefficient

Full Name
UTRAN DRX Cycle Length Coefficient
Abbreviated Name
kUtran
Managed Object

3GPP Name
UTRAN DRX cycle length coefficient
3GPP Reference
TS 25.331
Description
This parameter is used for the discontinuous reception of UE in the

connection mode. This parameter is used to calculate the paging
occasion, that is, a constant required in monitoring the PICH cycle.
The discontinuous reception cycle is 2k frames. In the connection
mode, k is the minimum value in CS domain DRX cycle length
coefficient, PS domain DRX cycle length coefficient, and UTRAN
DRX cycle length coefficient.
Instance
RNC
ZWF21-01-003
Paging
3..9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-85
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter is used for the discontinuous reception
of UE in the connection modem and is a constant required in

monitoring the PICH cycle. The discontinuous reception cycle is 2^k
frames. In the connection mode, k is the minimum value among the
DRX cycle length coefficient of the attached domains, and UTRAN
DRX cycle length coefficient.
Configuration Rule: Considering UE's paging occasion and power
consumption of UE.
The smaller value means the more UE paging occasion, but more
power will be consumed, and the vice versa.
Consider both UE's paging occasion and power consumption of UE.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.59 Inter-Frequency Balance Switch Based on Measurement

Full Name
Inter-Frequency Balance Switch Based on Measurement
Abbreviated Name
rabMeaBalStaSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates balance switch based on measurement.

If this switch is on, neighboring cells with "neighbor" or "contained
in" relation use measurement-based balance; neighboring cells with
"Overlap" or "Covers" relation may also use measurement-based
balance only if CoverMeaBalSwch is on too. Otherwise, only blind
handover-based balance will be performed to the neighboring cells
with "Overlap" or "Covers" relation.
2-86
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-04-011
Load Balancing
Load Balancing FG
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the inter-frequency balance switch based
on the measurement.
Related factor: Set this parameter based on coverage of neighboring
cell.
If this switch is on, neighboring cells with "neighbor" or "contained
in" relation use measurement-based balance; neighboring cells with
"Overlap" or "Covers" relation may also use measurement-based
balance only if the CoverMeaBalSwch switch is on too. If the switch
is off, only blind handover-based balance will be performed for the
neighboring cells with "Overlap" or "Covers" relation.
The default value is set based on the neighboring cell coverage.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-87
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.60 Inter-Frequency Balance Switch Based on Measurement

with Overlapping or Covering Relation
Full Name
Inter-Frequency Balance Switch Based on Measurement with

Overlapping or Covering Relation
Abbreviated Name
coverMeaBalSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates balance switch based on measurement.

If the RabMeaBalStaSwch and CoverMeaBalSwch is on, balance
based on measurement will be performed to the neighboring cells
with overlapping or covering relation, otherwise, balance based
on blind handover will be performed to the neighboring cells with
overlapping or covering relation.
Instance
RNC
ZWF21-04-011
Load Balancing
Load Balancing FG
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-88
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the inter-frequency balance switch based
on measurement with overlapping or covering relation.

Related factor: Set this parameter based on success rate of blind
handover based measurement balance.
If the RabMeaBalStaSwch and CoverMeaBalSwch switches are on,
measurement-based balance will be performed for neighboring cells
with overlapping or covering relation; blind handover based balance
will be performed for neighboring cells with overlapping or covering
relation. Measurement-based balance can improve the successful
rate of balance for the UE on cell's boundary, but the procedure is
more complicated and delay is longer than that of blind handover
based balance.
The default value is set based on the success rate of blind handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.61 Timer of Deactivate Compressed Mode for Balance Strategy

Based On Measurement
Full Name
Timer of Deactivate Compressed Mode for Balance Strategy Based

On Measurement
Abbreviated Name
measBalTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-89
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates timer of deactivating compressed mode

for the balance strategy based on measurement. When the timer
expires, if no inter-frequency event (2C) is reported, the RNC will
determine whether compressed mode is deactivated based on
current signal quality.
Instance
RNC
ZWF21-04-011
Load Balancing
Load Balancing FG
1..255, step 1
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: sets the timer of deactivate compressed mode
for the balance strategy based on measurement.

Related factor: Set this parameter based on the time of compressed
mode active and the UE measurement.
If this parameter is set to a smaller value, the activation time
of compressed mode is shorter and the UE may not finish
measurement. If this parameter is set to a larger value, the activation
time of compressed mode is longer but which impact cell throughput.
The default value is set based on the duration to start the
Reason
compression mode measurement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-90
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.1.62 The Time Threshold that the RNC May Resend the
MEASUREMENT CONTROL RELEASE
Full Name
The Time Threshold that the RNC May Resend the MEASUREMENT
CONTROL RELEASE
Abbreviated Name
tResndMeaCtrlRel
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the time when an RNC

resends the MEASUREMENT CONTROL RELEASE message.
When the RNC sends the MEASUREMENT CONGROL RELEASE
message for a measurement ID, the time stamp is recorded. If the
RNC receives the report with the measurement ID, it compares
the current time with the recorded time. If the difference between
the current time and the recorded time exceeds the threshold
configured, the MEASUREMENT CONTROL RELEASE message
is resent; otherwise, this measurement report is discarded and the
MEASUREMENT CONTROL RELEASE message is not resent.
This parameter is used to control the sending frequency for the
MEASUREMENT CONTROL RELEASE message.
Instance
RNC
ZWF21-03-001
ZWF21-03-003
ZWF21-03-004
ZWF21-03-110
Soft/Softer Handover
Inter-RAT Mobility
Handover with LTE
Handover Control FG
(1..255)s, step 1s
Unit
2-91
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
30s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: time threshold for an RNC to resend the
MEASUREMENT CONTROL RELEASE message.

and the number of the Measurement Control Failure messages on
the Uu interface.
A smaller parameter value helps to reduce the time delay
for the RNC to resend the MEASUREMENT CONTROL
RELEASE message and helps to ensure the UE to receive the
MEASUREMENT CONTROL RELEASE message sooner and to
release the specified measurement sooner, but may increase the
number of the MEASUREMENT CONTROL FAILURE messages
on the Uu interface.
A larger parameter value helps to decrease the number of the
MEASUREMENT CONTROL FAILURE messages on the Uu
interface, but may increase the time delay for the RNC to resend the
MEASUREMENT CONTROL RELEASE message and for the UE to
release the specified measurement.
Reason
the UE and UTRAN, and the number of the Measurement Control

Failure messages on the Uu interface.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-92
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.63 The Target of UE Version for Heart Beat (R4)

Full Name
The Target of UE Version for Heart Beat (R4)
Abbreviated Name
heartBeatUeVerR4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to execute heart beat detections

to the UE of R4 version and the versions before. "0": The heart beat
detection is not executed. "1" The heart beat detection is executed.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: False;
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the version number of the UE for
heartbeat detection.
As a solution to signaling storm, this parameter indicates the version
number of the UE for heartbeat detection.
It is not recommended to perform heartbeat detection on the UE
when the signaling load is not high.
If the signaling load is not high, heartbeat detection to the UE is not
Reason
recommended. Because it will increase the system load.
Change Take Effect
Ongoing Connection
No
2-93
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
heartBeatUeVerR5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

to the UE of R5 version. "0": The heart beat detection is not
executed. "1" The heart beat detection is executed.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: False;
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-94
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
heartBeatUeVerR6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: False;
1: True
2-95
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
heartBeatUeVerR7
Managed Object

3GPP Name
N/A
2-96
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description

Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: False;
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-97
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
heartBeatUeVerR8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

to the UE of R8 version and the later versions. "0": The heart beat
detection is not executed. "1" The heart beat detection is executed.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: False;
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Reason
Change Take Effect
Ongoing Connection
No
2-98
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.68 Heart Beat Period

Full Name
Heart Beat Period
Abbreviated Name
heartBeatFreq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period of UE heart beat detection.

In order to avoid UE (before R8) sending signaling Connection
Release Indication (SCRI) and releasing signaling connections
initiatively, RNC would operate heart beat detection when there is
no data transmission with CN. UE will not send SCRI if there is data.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0..65535, step 1; Unit: 100ms
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-99
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: sets the period of heartbeat detection.
According to tests, the UE will send an SCRI message after four

to five seconds when there is no data. Therefore, this parameter
should be set to a value smaller than this value to prevent the UE
from sending the SCRI message to release the network connection.
If this parameter is too small, the heartbeat detection will be
performed frequently, which causes a waste of resources.
The default value is set to extend the period for the heartbeat
Reason
detection when UE does not send the SCRI messages.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.69 The Switch Indicates whether Only Judge the Downlink

Traffic on Heart Beat for Channel Switching to PCH/IDLE
Full Name
The Switch Indicates whether Only Judge the Downlink Traffic on

Heart Beat for Channel Switching to PCH/IDLE
Abbreviated Name
onlyDnOnHB
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to only judge the downlink traffic

on heart beat detection for channel switching to PCH/IDLE.
If it is on: no need to consider the restriction of uplink traffic on heart
beat for the channel switching to PCH/IDLE.
If it is off: the channel switching to PCH/IDLE needs to consider the
uplink measurement report restriction on heart beat detection.
2-100
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets whether the UE for heartbeat detection
only considers the downlink service when it switches to the PCH

or IDLE state.
According to tests, the UE does not generate uplink packages for
heartbeat detection data, and the uplink and downlink traffic volume
measurement will not be affected when the UE switches to the PCH
or IDLE state. Therefore, set the OnlyDnOnHB parameter to 0: off.
Verified by the detection, UE does not generate uplinks packets for
Reason
the heartbeat data or effect the service amount measurement based

on the uplink and downlink transferring to PCH/IDLE. Therefore, set
OnlyDnOnHB to "0: Off".
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-101
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.70 BER Target Adjust Timer in Fast OLPC SIR Target Downward
Adjustment Based on BER
Full Name
BER Target Adjust Timer in Fast OLPC SIR Target Downward

Abbreviated Name
berTargAdpTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER target adjustment timer in the

fast BER-based SIR target downward adjustment algorithm for
outer loop power control. When the timer expires, the BER target
is adjusted.
Instance
RNC
N/A
N/A
Parameter for future use
(0..1000)ms, step 10ms
Unit
ms
Default Value
500ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
This parameter is not used in this version.
N/A
Reason
Change Take Effect
No
2-102
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.71 Time of Waiting for RADIO LINK RESTORE INDICATION

Full Name
Time of Waiting for RADIO LINK RESTORE INDICATION
Abbreviated Name
tWaitRlRestore
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
RNC waiting time for the response of the RADIO LINK RESTORE
INDICATION message.
There are three application scenarios as follows:
1. If the RNC receives a RADIO LINK SETUP RESPONSE message
from the NodeB/DRNC, the RNC should wait for the RADIO LINK
RESTORE INDICATION message from the NodeB/DRNC.
2. If the RNC receives a RADIO LINK ADD RESPONSE message
from the NodeB/DRNC, and the added RL belongs to a new RlSet,
the RNC should wait for the RADIO LINK RESTORE INDICATION
message from the NodeB/DRNC.
3. If the RNC receives a RADIO LINK FAILURE INDICATION
message from the NodeB/DRNC, and the failure cause is synchronisation_failure or not_enough_user_plane_processing_resources,
the RNC should wait for the RADIO LINK RESTORE INDICATION
message from the NodeB/DRNC.
Instance
RNC
ZWF21-01-002
1..200, step 1; Unit: 100ms
2-103
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
100ms
Default Value
100 (100ms)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the time duration for
the RNC waiting for the response of the RADIO LINK RESTORE
INDICATION message.
Configuration rule: the synchronization time during the Uu interface
synchronization, the user experiences, and the call reestablishment
time.
If the parameter value is too small, the failure rate of the RL
synchronization and the call drop rate will be increased. If this
parameter is too high, the success rate of RL synchronization
will be increased, but the RNC will waiting for a long time when
the Uu interface quality is poor, increasing the time delay for call
reestablishment and affecting the user experiences.
The default value is 3 s, which is set based on the synchronization
Reason
time over the Uu interface, the user experiences, and the call
reestablishment time.
Change Take Effect
Ongoing Connection(at new radio link)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-104
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.72 Time of Waiting for CELL UPDATE After RNC

Sending Radio Link Deactivation Command for RB
Setup/Reconfiguration/Release Response Timer Expiration
Full Name
Time of Waiting for CELL UPDATE After RNC Sending Radio Link
Deactivation Command for RB Setup/Reconfiguration/Release
Response Timer Expiration
Abbreviated Name
tWaitCelUpUuExp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
waiting time for a CELL UPDATE message from the UE after the
RNC sends an RL deactivation command.
The RNC may initiate a call reestablishment procedure and send an
RL deactivation command to NodeB at expiry of the timer that waits
for an RB establishment /RB release/reconfiguration (non-hard
switchover) message from the Uu interface.
The timer starts when the RNC sends an RL deactivation command,
and stops on receipt of a CELL UPDATE message. If the RNC does
not receive a CELL UPDATE message from the UE at expiry of the
timer, the UE RRC is released.
Instance
RNC
ZWF21-01-008
Radio Connection Re-establishment
Radio Connection Re-establishment FG
1..500, step 1; Unit: 100ms
Unit
100ms
Default Value
100 (100ms)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-105
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the value of the timer
that specifies the waiting time for a CELL UPDATE message from
the UE after the RNC sends an RL deactivation command.
Related factors: the Uu interface out-of-sync time detected by the
UE, the user experiences, and the call reestablishment time.
If the parameter value is too small, the probability of the UE CELL
UPDATE will be reduced, and the call drop rate will be increased.
If this parameter is too high, the success rate of the UE CELL
UPDATE will be increased, but the RNC will wait for a long time
when the Uu interface quality is poor, increasing the time delay for
call reestablishment and affecting the user experiences.
The default value is set based on the Uu interface out-of-sync
Reason
time detected by the UE, the user experience, and the call
reestablishment time.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.73 Waiting time length for ACTIVE SET UPDATE COMPLETE

Full Name
Waiting time length for ACTIVE SET UPDATE COMPLETE
Abbreviated Name
tWaitActSetUpCmp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-106
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
The RNC initiates a RB re-establishment procedure at expiry of the

timer that waits for an active set update complete message from the
Uu interface. This parameter indicates the value of the timer that
specifies the waiting time for a CELL UPDATE message from the
UE after the RNC sends an RL deactivation command.
The timer is started when the RNC sends an RL deactivation
command, and stopped on receipt of a CELL UPDATE message. If
the RNC does not receive a CELL UPDATE message from the UE
at expiry of the timer, the UE RRC is released.
Instance
RNC
ZWF21-01-008
10..200, step 1; Unit: 100ms
Unit
100ms
Default Value
100 (100ms)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the value of the
timer that is used by the RNC to wait for ACTIVE SET UPDATE
COMPLETE.
Configuration rule: The time needed for physical layer
synchronization during soft handover, the user experience, and the
call reestablishment time must be considered.
If the value is too small, the probability that the RNC receives an
ACTIVE SET UPDATE COMPLETE message will be reduced and
the call drop ratio will increase.
If the value is too large, the probability that the RNC receives an
ACTIVE SET UPDATE COMPLETE message will be improved. But
when the Uu interface quality becomes bad, the call reestablishment
waiting time or the time before user redial will be prolonged due to
unnecessary waiting, which decreases the user experience.
2-107
SJ-20141209142030-013|2015-11-12 (R1.3)
The synchronization time during soft handover, the user experience,
Reason
and the call reestablishment time are considered to define the

default.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.74 Time of Waiting for RB Setup/Reconfiguration/Release

Response over Uu Interface
Full Name
Time of Waiting for RB Setup/Reconfiguration/Release Response

over Uu Interface
Abbreviated Name
waitRbCompTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of the timer that is used by the
RNC to wait for an RB release/reallocation (non-hard handover)
message from the Uu interface.
The timer is started when the RNC sends a RADIO BEARER
RELEASE, RADIO BEARER RECONFIGURATION, TRANSPORT
CHANNEL RECONFIGURATION, or PHYSICAL CHANNEL
RECONFIGURATION message to a UE.
The timer is stopped when the RNC receives a RADIO BEARER
RELEASE COMPLETE, RADIO BEARER RECONFIGURATION
COMPLETE, TRANSPORT CHANNEL RECONFIGURATION
COMPLETE, or PHYSICAL CHANNEL RECONFIGURATION
COMPLETE from the UE.
At expiry of the timer, the RNC sends a Radio Link Deactivation
Command to all RLS.
2-108
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-01-008
(1..10)s, step 1s
Unit
Default Value
5s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
that is used by the RNC to wait for an RB release/reallocation

(non-hard handover) complete message from the Uu interface.
Configuration rule: The message transmission time over the Uu
interface, UE processing time, user experience, and the call
reestablishment time must be considered.
If the value is too small, the probability that the RNC receives an RB
release/reallocation complete message will be reduced, and the call
drop ratio will increase.
If the value is too large, the probability that the RNC receives an
RB release/reallocation complete message will be improved. But
when the Uu interface quality becomes bad, the call reestablishment
waiting time or the time before user redial will be prolonged due to
unnecessary waiting, which decreases the user experience.
The default value is 5s, which is determined in accordance with the
Reason
message transmission time over the Uu interface, UE processing

time, user experience, and the call reestablishment time.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-109
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.1.75 Time of Waiting for RRC CONNECTION COMPLETE

Full Name
Time of Waiting for RRC CONNECTION COMPLETE
Abbreviated Name
tRrcConSetupExp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the value of the timer that is used to wait
for the completion of RRC connection setup.
SETUP message.
The timer is stopped when the RNC receives an RRC CONNECTION
SETUP COMPLETE message.
At expiry of the timer, the Radiolink is released.
Instance
RNC
ZWF21-01-002
10..100, step 1; Unit: 100ms
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-110
SJ-20141209142030-013|2015-11-12 (R1.3)
that is used by the RNC to wait for RRC CONNECTION SETUP

COMPLETE.
Configuration rule: The message transmission time over the Uu
interface, UE processing time, and the user experience must be
considered.
If the value is too small, the probability that the RNC receives an
RRC CONNECTION SETUP COMPLETE message will be reduced
and the RRC connection setup failure ratio will increase.
If the value is too large, the probability that the RNC receives
an RRC CONNECTION SETUP COMPLETE message will be
improved. But when the Uu interface quality becomes bad, the UE
re-access time will be prolonged due to unnecessary waiting, which
decreases the user experience.
The default value is 5s, which is determined in accordance with the
Reason
message transmission time over the Uu interface, UE processing

time, and the user experience.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.76 Switch of Fast Reconfiguration Function When the HS

Service Cell was Changed
Full Name
Switch of Fast Reconfiguration Function When the HS Service Cell

was Changed
Abbreviated Name
celChgFastCfgInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-111
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the fast reconfiguration is enabled

when the HS serving cell changes.
Instance
RNC
ZWF21-01-024
RL Fast Reconfiguration
RL Fast Reconfiguration FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether the fast
reconfiguration is enabled when the HS serving cell changes.

Configuration rule: This parameter must be configured depending
on whether the Node B supports the fast reconfiguration function.
If the Node B supports fast reconfiguration when the HS serving cell
changes, the parameter is set to On. If the Node B does not support
fast reconfiguration, the parameter is set to Off.
The default value is "Off" because the Node B does not generally
Reason
support fast reconfiguration.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-112
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.77 Waiting Timer for SRNS Context Request

Full Name
Waiting Timer for SRNS Context Request
Abbreviated Name
tWaitContextReq
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the duration for waiting for the SRNS
CONTEXT REQUEST message.
Enabled: This timer is enabled when the cell is relocated to another
RAT.
Expiration: When an IU RELEASE REQ message is transmitted,
another timer for waiting for IU RELEASE COMMAND from CN
is enabled.
Disabled: The timer is disabled when the SRNS receives an SRNS
CONTEXT REQUEST message.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
1..500, step 1; Unit: 100ms
Unit
100ms
Default Value
200
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-113
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the duration for
waiting for SRNS CONTEXT REQUEST.

The greater the value, the longer the wireless resources allocated to
the RNC are suspended.
The smaller the value, the shorter the wireless resources allocated
to the RNC are suspended. However, if the value is too small, the
SGSN may not have enough time to send the SRNS CONTEXT
REQUEST message, which affects service quality.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.78 Waiting Timer for SRNS Data Forward Command

Full Name
Waiting Timer for SRNS Data Forward Command
Abbreviated Name
tWaitDataFwd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-114
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the duration for waiting for the SRNS DATA
FORWARD COMMAND message.
Enabled: This timer is enabled after the SRNS transmits the
CONTEXT RESPONSE message to the CN.
Expiration: When an IU RELEASE REQ message is transmitted,
the timer for waiting for the IU RELEASE COMMAND message
from CN is enabled.
Disabled: The timer is disabled when the SRNS receives the SRNS
DATA FORWARD COMMAND message.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
1..500, step 1; Unit: 100ms
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the maximum time for
waiting for SRNS DATA FORWARD COMMAND.

CN may not have enough time to finish SRNS DATA FORWARD
COMMAND.
Reason
Change Take Effect
New Connection
No
2-115
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.79 Waiting Timer of SRNS for IU RELEASE COMMAND while PS

service handover from 3G to 2G
Full Name
Waiting Timer of SRNS for IU RELEASE COMMAND while PS

service handover from 3G to 2G
Abbreviated Name
tWaitRelCmd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the duration for waiting for the IU RELEASE
COMMAND message. Enabled: This timer is enabled after the
SRNS receives the DATA FORWARD COMMAND message or the
timer that waits for the DATA FORWARD COMMAND message
expires. Expiration: This timer expires when the Iu resource is
released.
Disabled: This timer is disabled when the SRNS receives the IU
RELEASE COMMAND message.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
1..500, step 1; Unit: 100ms
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-116
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the maximum time for
waiting for IU RELEASE COMMAND during the relocation of SRNS.

CN may not have enough time to complete the reallocation flow.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.80 Network Resource Identifier Bit Num in CS Domain

Full Name
Network Resource Identifier Bit Num in CS Domain
Abbreviated Name
csNriBitNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-117
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
An NRI identifies a single CN node in a pool area of the CS/PS

domain. It is allocated by the CN node and included in TMSI/P-TMSI
to inform UEs. The NRI length is variable (010 bits, the highest
bit is the 23rd bit of TMSI/P-TMSI). The number of bits in an NRI
is configured according to the pool area network and the NRI
allocation strategy in the CN node. The NRI length should be same
in all CN nodes of a CS/PS pool area.
Instance
NE Office
ZWF21-30-021
Iu Flex
Iu Flex FG
0..10, 0: not Support IU FLEX
Unit
N/A
Default Value
Related Parameters
N/A
All the CnNriBitNum of single domain have the same value
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter configures the NRI bit length
of the CS/PS node.

Configuration rule: This parameter should be negotiated with the CN,
and is only configured when the NE type is MSCSERVER/SGSN.
No influx is used by default, and this parameter should be negotiated
Reason
with the CN.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-118
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.81 Network Resource Identifier Bit Num in PS Domain

Full Name
Network Resource Identifier Bit Num in PS Domain
Abbreviated Name
psNriBitNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
An NRI identifies a single CN node in a pool area of the CS/PS

domain. It is allocated by the CN node and included in TMSI/P-TMSI
to inform UEs. The NRI length is variable (010 bits, the highest bit
is the 23rd bit of TMSI/P-TMSI). The number of bits in an NRI is
configured according to the pool area network and the NRI allocation
strategy in the CN node. The NRI length should be same in all CN
nodes of a CS/PS pool area. The number of NRI bits is configured
according to the pool area network and the NRI allocation strategy
in the CN node.
Instance
RNC
ZWF21-30-021
Iu Flex
Iu Flex FG
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter configures the NRI bit length
of the PS node.
Configuration rule: This parameter should be negotiated with the
CN, and is only configured when the NE type is SGSN.
no influx is used by default, and this parameter need to be
Reason
negotiated with CN
2-119
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.82 GBR of AMR Service Whether to be Reserved Indicator

Full Name
GBR of AMR Service Whether to be Reserved Indicator
Abbreviated Name
amrGbrResInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the GBR rate assigned by the CN

is forcibly reserved in Iu UP V1 mode, when the GBR rate assigned
by the CN does not match the AMR rate configured by RNC.
Instance
RNC
ZWF21-04-005

0: False
1: True
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-120
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether to reserve the GBR rate of
the AMR service.

Configuration rule:
If the switch is on, in Iu UP V1 mode, when the GBR rate that the
CN specifies for the AMR service does not match the AMR rate
configured by the RNC, the GBR rate specified by the CN is forcibly
reserved. In this case, the AMR service can still attempt to access
at the GBR rate after the access failure at the maximum bit rate.
If the switch is off, in Iu UP V1 mode, when the GBR rate that the
CN specifies for the AMR service does not match the AMR rate
configured by the RNC, the GBR rate specified by the CN will not
be forcibly reserved.
This switch is set to off only when the Iur interface does not support
the GBR rate specified by the CN.
The default value is set to 1. Because it is set to 0 only when the
Reason
IUR interfaces of the other manufactures do not support the GBR

rates allocated by CN.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.83 Location Mode

Full Name
Location Mode
Abbreviated Name
locModeSwch
Managed Object

2-121
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates Location Mode Method.The Location mode

method includes RNC location and SAS location.RNC location uses
RNC inner location module to position, and SAS location supports
SAS centric mode, which uses SAS to choice position method (eg,
cell ID , AGPS etc.) and accomplish position.
Instance
RNC
ZWF21-10-008
Iu-pc Support
Location Service FG
0: RNC Location Mode

1: SAS Location Mode
Unit
N/A
Default Value
0: RNC Location Mode
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
This is configured according to operator's requirement. RNC
Location Mode needn't add SAS but it will increase RNC CPU load
by location service.SAS Location Mode will add IUPC interface
between RNC and SAS which will increase message volume
on IUPC. In SAS Location Mode, position method and position
calculation is in SAS, which also decrease RNC CPU load.
Choosing RNC location mode, RNC will support location service
Reason
when RNC is not configured SAS device.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-122
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.1.84 QChat Support Indicator

Full Name
QChat Support Indicator
Abbreviated Name
qChatSupportInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether QChat is supported.
Instance
RNC
ZWF21-02-030
PTT Service Support
QCHAT FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether QChat is supported.
Related factors: the Qchat function switch.

If the RNC needs to support the Qchat function, set the parameter
to 1. Otherwise, set it to 0.
License parameter, and set according to the operators requirement.
Reason
2-123
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.85 RNC Switch of Fast Return to E-UTRAN

Full Name
RNC Switch of Fast Return to E-UTRAN
Abbreviated Name
fastRetEUtranSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a global switch that enables or disables fast return

of UE to the EUTRAN.
When this switch is turned on, the RNC in a network with both
UMTS and EUTRAN deployed can instruct a UE to fast return to the
EUTRAN upon a CS release after the UE is handed over from the
EUTRAN to the UTRAN due to CSFB or SRVCC.
When this switch is turned off, the RNC in a network with both
UMTS and EUTRAN deployed will not instruct a UE to fast return to
the EUTRAN upon a CS release after the UE is handed over from
the EUTRAN to the UTRAN due to CSFB or SRVCC.
Instance
RNC
ZWF21-03-111
Fast Return to LTE
Fast Return to LTE FG
0: Off
1: On
Unit
N/A
2-124
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates whether fast return to
the EUTRAN is enabled.

Configuration rule: The network planning and requirement must
be considered.
If this switch is turned on, the RNC in a network with both UMTS and
EUTRAN deployed can instruct a UE to fast return to the EUTRAN
upon a CS release after the UE is handed over from the EUTRAN to
the UTRAN due to CSFB or SRVCC. The fast return feature allows
a UE to return to the EUTRAN quickly upon release of voice service
in the 3G network, providing a better user experience.
If this switch is turned off, the RNC in a network with both UMTS
and EUTRAN deployed will not instruct a UE to fast return to the
EUTRAN upon a CS release after the UE is handed over from
the EUTRAN to the UTRAN due to CSFB or SRVCC. The UE
will remain in the 3G network or slowly return to the LTE network
through cell reselection.
The default is set to "Off". The fast return feature is controlled by a
Reason
license.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-125
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.86 Target Cell Judgment Strategy for Access/Handover

Algorithm in Shared Network
Full Name
Target Cell Judgment Strategy for Access/Handover Algorithm in

Shared Network
Abbreviated Name
shaNetTarCelStra
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the determination policy for

access/handover to the target cell in a shared network.
Instance
RNC
ZWF21-30-102
Shared Networks Access Control
RAN Sharing FG
0: Judgment Based on Authorization Information

1: Judgment Based on Selected PLMN
Unit
N/A
Default Value
0: Judgment Based on Authorization Information
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: determination policy for access/handover to the
target cell in a shared network

Related factors: network planning of the operator, configuration
complexity
In a shared network if the determination policy is based on
authorization information, this parameter is set to 0. If the
determination policy is based on selected PLMN, the parameter
is set to 1.
2-126
SJ-20141209142030-013|2015-11-12 (R1.3)
The default parameter value is set based on the network planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.87 HCS Support Indicator

Full Name
HCS Support Indicator
Abbreviated Name
hcsSupportInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether HCS is supported or not in cell

reselection and handover. HCS is a mechanism that divides cells
into different layers. In the case of cell reselection and handover,
the UE at high speed can be handed over to the cell with low priority
to improve system capacity and ensure timely reselection/handover.
Instance
RNC
ZWF21-03-021
Hierarchical Cell Structures
Hierarchical Cell Structures FG
0: Not Support HCS

1: Support HCS in Cell Reselection, Not Support HCS in Handover
2: Not Support HCS in Cell Reselection, Support HCS in Handover
3: Support HCS in Cell Reselection, Support HCS in Handover
Unit
N/A
Default Value
0: Not Support HCS

2-127
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: whether HCS is supported or not in cell
reselection and handover

Related factors: movement speeds of UEs, handover/reselection
timeliness
In the case of cell reselection and handover, UEs at high speeds
can be handed over to the cell with low priority HCS to ensure timely
handovers and service continuity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.88 UE's Device Type Condition Whether to be Judged Indicator

when Heart Beat Detection
Full Name
UE's Device Type Condition Whether to be Judged Indicator when

Heart Beat Detection
Abbreviated Name
deviceTypeInd
Managed Object

3GPP Name
N/A
2-128
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates whether to judge the IE "Device type" in

the message "RRC Connection Setup Complete", when judge the
conditions should be satisfied for UE which is performed heart beat
detection.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets whether to check the device type of the UE
before the heartbeat detection.

Related factors: corresponding factors.
When the R7 fast dormancy suppressing function checks whether
to perform heartbeat detection on the UE, it identifies the data card
through the Device Type information element. However, some
mobile phones can also report this information element. Therefore,
the heartbeat detection may fail to be performed on the UE because
the UE has reported this information element. In this case, this
parameter should be used. It is recommended to set this parameter
to 0, which means not checking the device type of the UE before
the heartbeat detection.
The default value is set to avoid the situation that the heartbeat
Reason
detection to UE is required, but it is not executed because the UE

reports the cell.
Change Take Effect
Ongoing Connection
No
2-129
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.89 CDT Overload Threshold

Full Name
CDT Overload Threshold
Abbreviated Name
cdtOvdThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CDT overload control function.
Instance
RNC
ZWF21-20-013
Call Detail Trace (CDT) Data Report
CDT FG
(1..100)%, step 1%
Unit
Default Value
100
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-130
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: network planning & optimization parameter, the
CPU overload threshold of the CDT function.

Related factors: RNC system performance, data size of the CDT.
The larger the parameter is, the higher the CPU overload threshold
is, the later the RNC stops sending out the CDT data, and the
larger the data size is, but the greater the influence on RNC system
performance is.
The smaller the parameter is, the lower the CPU overload threshold
is, and the slighter the influence of data acquisition of the CDT
function on RNC system performance is, but the earlier the RNC
stops sending out the CDT data, and the smaller the data size is.
The default value is set based on the RNC system performance
Reason
and data size of the CDT.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.90 Wait Time for RECONFIGURATION COMPLETE when UE

Leaving PCH or FACH State to Enter CELL _DCH State
Full Name
Wait Time for RECONFIGURATION COMPLETE when UE Leaving

PCH or FACH State to Enter CELL _DCH State
Abbreviated Name
tReCfgLevCmnStat
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the SRNC waiting time for the

RECONFIGURATION COMPLETE message from the UE when the
UE leaves PCH or FACH state and enters CELL_DCH state.
2-131
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
(1..60)s, step 1s
Unit
Default Value
5s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: SRNC waiting time for the RECONFIGURATION
COMPLETE message from the UE when the UE leaves PCH or

FACH state and enters CELL_DCH state.
Related factors: channel transferring success rate and time delay.
The larger the parameter is, the longer the waiting time is. This can
increase the channel transferring success rate, but may prolong the
transferring procedure time delay.
The smaller the parameter value is, the shorter the waiting time is.
This can shorten the transferring procedure time delay, but may
decrease the channel transferring success rate.
The default value is set based on the channel switching success
Reason
rate and time delay.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-132
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.91 RRC on HS channel with MC (include DC) Indicator

Full Name
RRC on HS channel with MC (include DC) Indicator
Abbreviated Name
rrcOnHsMc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates when RRC on HS channel whether it is

also allowed to setup on multi-cell (include dual-cell). When it is
"True", if multi-cell (include dual-cell) has already been selected
during RRC procedure, there is no change during RAB assignment
procedure. When it is "False", multi-cell (include dual-cell) will be
selected during RAB assignment procedure.
Instance
RNC
ZWF26-02-004
ZWF26-04-001
DC-HSDPA
4C-HSDPA
DC-HSDPA FG
4C-HSDPA FG
0: FALSE
1: TRUE
Unit
N/A
Default Value
0: FALSE
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-133
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates when RRC on
HS channel whether it is also allowed to setup on multi-cell

(include dual-cell). When it is "True", if multi-cell (include dual-cell)
has already been selected during RRC procedure, there is no
change during RAB assignment procedure. When it is "False",
multi-cell (include dual-cell) will be selected during RAB assignment
procedure.
Rule: If it is expected to have multi-cell during RRC procedure, this
parameter is set as "True". However, in this case, multi-cell only
in the same frequency band can be selected. If this parameter is
set as "False", multi-cell can be selected from differenct frequency
bands during RAB assignment procedure.
The default value is set based on whether Multi-cell (include
Reason
dual-cell) is used during RRC procedure.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.92 Switch of Using DL Power Control Request Information in

Iur Interface
Full Name
Switch of Using DL Power Control Request Information in Iur

Interface
Abbreviated Name
iurPwrCtlReqSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-134
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether to enable or disable the downlink

power balancing function through the Power Control Request
message on the Iur interface. When this function is enabled, the
DRNC can send the DL POWER CONTROL REQUEST message
received from the Iur interface to the Node B. When this function
is disabled, the DRNC will discard the DL POWER CONTROL
REQUEST message received from the Iur interface.
Instance
RNC
ZWF21-04-008
Downlink Power Balancing
Power Control FG
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether to enable or
disable the downlink power balancing function through the Power

Control Request message on the Iur interface.
Related factors: This parameter must be configured by taking the
link quality of the DRNC into consideration.
When this function is enabled, the DRNC can send the DL POWER
CONTROL REQUEST message received from the Iur interface to
the Node B.
When this function is disabled, the DRNC will discard the DL
POWER CONTROL REQUEST message received from the Iur
interface.
When this functon is enabled on the SRNC side, you can disable
it if the link quality is poor or even the call drop rate rises on the
DRNC side. The downlink power balancing can be determined by
the DRNC.
According to the 3GPP protocols, the downlink power balancing
Reason
parameter needs to be obtained from the SRNC.
2-135
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Ongoing Connection(at new radio link in DRNC)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.93 The Offset of CPICH Ec/No in Iur Interface Relative to the

UE Measurement Result
Full Name
The Offset of CPICH Ec/No in Iur Interface Relative to the UE

Measurement Result
Abbreviated Name
iurEcNoDelta
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the offset of the CPICH Ec/No of the Iur
interface relative to the measured value of the UE. The CPICH
Ec/No of the Iur interface is obtained by subtracting the CPICH
Ec/No measured by the UE from the offset.
Instance
RNC
ZWF21-04-009
Power Control
Power Control FG
(0..30)dB, step 1dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
2-136
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the offset of the
CPICH Ec/No of the Iur interface relative to the measured value

of the UE. The CPICH Ec/No of the Iur interface is obtained by
subtracting the CPICH Ec/No measured by the UE from the offset.
Related factors: This parameter must be configured by taking
both the link quality of the DRNC and power waste avoidance into
consideration.
If this parameter is too big, the initial transmit power will be relatively
great on the DRNC link, which will cause power waste.
If this parameter is too small, the initial transmit power will be
relatively small on the DRNC link, which will affect service quality.
Adjustment suggestion: When some problems (for example, call
drop) occur because the initial transmit power of the DRNC link is
too low, you can increase this parameter properly.
Usually, the default value of this parameter can meet the link quality
Reason
requirement of the DRNC and avoid power waste.
Change Take Effect
Ongoing Connection(at new radio link in DRNC)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.94 Switch of URA_PCH/CELL_PCH for UE of Release 99 and

Release 4
Full Name
Switch of URA_PCH/CELL_PCH for UE of Release 99 and Release

4
Abbreviated Name
r99R4PchSwch
2-137
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the switch to

URA_PCH/CELL_PCH is allowed for the UE of Release
99 and Release 4."0" means the switching to URA_PCH/CELL_PCH
is not allowed for the UE of Release 99 and Release, and "1" means
to be allowed.
Instance
RNC
ZWF21-04-004
0: Not Allowed
1: Allowed
Unit
N/A
Default Value
0: Not Allowed
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets whether to allow R99 and R4 terminals to
switch to the URA_PCH state.

If the switch is set to off, when the PCH is enabled, the R99 and R4
terminals are not allowed to switch to the PCH when there is no data
on them. If there are R99 and R4 terminals that are incompatible
with the PCH state in the network, the call drop ratio can be reduced.
If the switch is set to on, when the PCH is enabled, the R99 and
R4 terminals are allowed to switch to the PCH when there is no
data on them.
If some R99 and R4 terminals are incompatible with the PCH state,
it is recommended to set this switch to off.
Verified by the test, there is compatibility issue between the
Reason
R99-type terminals and PCH status. "Not Allowed" is recommended

so as to directly transfer to the idle status.
2-138
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.95 UTRA SI Switch

Full Name
UTRA SI Switch
Abbreviated Name
utraSISwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the switch that enables or disables the UTRA

SI function.
If the function is disabled, the RNC does not respond to UTRA SI
requests from the ENB, and the system information of RNC cells
will not be sent to the eNode B.
If the function is enabled, the RNC responds to UTRA SI requests
from the ENB, and the system information of RNC cells will be sent
to the eNode B.
Instance
Rnc
ZWF21-03-100
Cell reselection with LTE
Cell reselection with LTE FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
2-139
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter determines whether the RNC
responds to UTRA SI requests from the ENB.

Configuration rule: This parameter is configured depending on
whether the UTRA SI function is required in the network.
The default is set to "Off", which can be modified in accordance
Reason
with the decision of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.96 Application Service Detection Period

Full Name
Application Service Detection Period
Abbreviated Name
appSrvDetcPrid
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the detection period which is used by user

plane for application service detection.
Instance
RNC
ZWF27-01-003
2-140
SJ-20141209142030-013|2015-11-12 (R1.3)
Deep Packet Inspection in RNC
Deep Packet Inspection in RNC FG
(0..65535)ms, step 20ms
Unit
ms
Default Value
1280
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the detection period which is
used by user plane for application service detection.

The related factor: The fluctuation of data stream, how important to
report the application service type in time.
The larger the parameter, the smaller the influence of the fluctuation
of data stream. But in this case, the result may not be reported
in time and the DPI handle in RNC may be delayed so leading to
bad user experience.
The smaller the parameter is, the easier the result is influenced by
the fluctuation of data stream. But in this case, the result could be
reported in time and good user experience is achieved.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-141
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.97 The Required Minimum Total Data Number in Application

Service Type Detection
Full Name
The Required Minimum Total Data Number in Application Service

Type Detection
Abbreviated Name
totalDataNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the total data number should be reached

during one application service detection period. If the total data
number is smaller than this parameter, the application service
detection should not be implemented in this detection period.
Instance
RNC
ZWF27-01-003
Unit
bytes
Default Value
100
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the total data number should be
reached during one application service detection period.

Related Factor:
N/A
Reason
Change Take Effect
New Connection
No
2-142
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.98 DPI pending Time

Full Name
DPI pending Time
Abbreviated Name
dpiPendingTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum time that the user plane
reports the application service type to control plane again after last
report.
Instance
RNC
ZWF27-01-003
(0..65535)ms, step 20ms
Unit
ms
Default Value
4000
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-143
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the minimum time that the user
plane reports the application service type to control plane again

after last report.
The related factor: The efficiency of application service type
detection, the time that the data stream to be stable after the RRM
QoS adjustment triggered by the change of application service type.
The larger the parameter is, the application service type may not be
reported in time. But on the other hand, the data stream has more
time to be stable, so the detection result is more efficient.
The smaller the parameter is, the application service type detection
is more frequently. The detection result can be reported in time.
But the data stream may have no enough time to be stable, the
efficiency of result may be influenced.
The efficiency of application service type detection and the time
Reason
that the data stream to be stable after the RRM QoS adjustment
triggered by the change of application service type are considered
to configure this parameter.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.99 User-defined PLMN Selection In Case of GWCN support

Indicator
Full Name
User-defined PLMN Selection In Case of GWCN support Indicator
Abbreviated Name
defPlmnInGwcnInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-144
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
The RNC may select a PLMN for a UE based on its IMSI. This
parameter indicates whether the RNC supports user-defined PLMN
selection.
Instance
RNC
ZWF21-30-100
Basic RAN Sharing Support
RAN Sharing FG
0: False
1: True
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the RNC
supports user-defined PLMN selection in GWCN mode.

Configuration rule: the network sharing function switch.
If the RNC is in GWCN mode, the home PLMN of UEs can be
configured based on the IMSI on the OMC. Therefore, the CN does
not need to be modified. If the RNC needs to support this function,
set the value to 1. Otherwise, it is set to 0.
In Most Case, user-defined is not needed
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-145
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.100 Multiple PLMNs is allowed In MIB or not

Full Name
Multiple PLMNs is allowed In MIB or not
Abbreviated Name
mulPlmnInMIBInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC can broadcast multiple

PLMNs in the MIB.
Instance
RNC
ZWF21-30-103
0: False
1: True
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether the RNC can
broadcast multiple PLMNs in the MIB.

Configuration rule: the legality of shared carrier network sharing.
For some networks, shared carrier network sharing is illegal.
Therefore, the MIB cannot broadcast multiple PLMNs. If this
restriction exists, set the value to 1. Otherwise, set it to 0.
consider shared carrier sharing is legal
Reason
Change Take Effect
No
0
2-146
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.101 Switch of RNC Send RL SETUP and RRC CONNECTION

SETUP in Parallel when Setting up RRC CONNECTION
Full Name
Switch of RNC Send RL SETUP and RRC CONNECTION SETUP

in Parallel when Setting up RRC CONNECTION
Abbreviated Name
parallelRrcSetup
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch that determines whether the send RL

SETUP and RRC CONNECTION SETUP in parallel over the Iub
and Uu interfaces during RRC connection setup.
When the switch is turned on, the RNC sends an RRC CONN
SETUP message over the Uu interface and an RL SETUP message
over the Iub interface in parallel during the RRC connection setup
procedure if the DCH is used as the signaling bearer. The parallel
message transmission reduces the delay during RRC connection
setup.
When the switch is turned off, the RRC connection setup procedure
is performed in sequence, meaning that the RNC sends an RRC
CONN SETUP message over the Uu interface only after successful
RL setup on the Iub interface.
Instance
RNC
ZWF21-01-002
0: Off
1: On
2-147
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
supports parallel transmission of messages over the Iub and Uu

interfaces during RRC connection setup.
on whether it is required to reduce the RRC connection setup delay.
When the switch is turned on, the RNC sends an RRC CONN
SETUP message over the Uu interface and an RL SETUP message
over the Iub interface in parallel during the RRC connection setup
procedure if the DCH is used as the signaling bearer. The parallel
message transmission reduces the delay during RRC connection
setup.
The RRC connection setup procedure fails if the RL setup on the
Iub interface fails.
When the switch is turned off, the RRC connection setup procedure
is performed in sequence, meaning that the RNC sends an RRC
CONN SETUP message over the Uu interface only after successful
RL setup on the Iub interface. If the RL setup on the Iub interface
fails, the RNC can attempt to select another cell for RRC connection
setup again.
This function is not required in most scenarios.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-148
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.1.102 The Routing Select Type for UE-Based

Full Name
The Routing Select Type for UE-Based
Abbreviated Name
routeTypeUEBased
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the UE feature used for routing.
Instance
RNC
ZWF21-30-103
0: None
1: Use IMSI
2: Use IDNNS
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the UE feature used
for routing.
Configuration rule: Only value 0 is set.
Only value 0 is set
Reason
Change Take Effect
Unmodifiable
No
2-149
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.103 CS Service Threshold for energy conservation

Full Name
CS Service Threshold for energy conservation
Abbreviated Name
csThdForEngCon
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates maximum CS service number when the

board is permit power off based on energy conservation.
Instance
RNC
ZWF21-20-020
RNC Dynamic Load Energy Saving
Dynamic Load Energy Saving FG
0..65535
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-150
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: Only the CS service number is less than the parameter
value, the Board is permitted power off.

The larger the Value, the easier the board power off and the more
the CS service drop.
The smaller the Value, the more difficult the board power off and the
less the CS service drop.
Only when the UE is little the board is permit power off. So the CS
Reason
service number threshold is set low and decrease the impact on

call drop KPI.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.104 UE Threshold for energy conservation

Full Name
UE Threshold for energy conservation
Abbreviated Name
ueThdForEngCon
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates maximum UE context number when the

board is permit power off based on energy conservation.
Instance
RNC
ZWF21-20-020
0..65535
Unit
N/A
2-151
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Only the UE context number is less than the parameter

the UE rrc connection drop.
less the UE rrc connection drop.
Only when the UE is little the board is permit power off. So the UE
Reason
number threshold is set low and decrease the impact on call drop
KPI.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.105 CS Service Threshold for Board Attribution switch

Full Name
CS Service Threshold for Board Attribution switch
Abbreviated Name
csThdForAttSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-152
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates maximum CS service number when the

board is permit power off based on board attribution switch.
Instance
RNC
ZWF21-20-022
RNC CP/UP Dynamic Resource Optimization
0..65535
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Only the CS service number is less than the parameter

the CS service drop.
less the CS service drop.
Consider to decrease the impact on call drop KPI, the CS service
Reason
number threshold is set low.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-153
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.106 UE Threshold for Board Attribution switch

Full Name
UE Threshold for Board Attribution switch
Abbreviated Name
ueThdForAttSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates maximum UE context number when the

board is permit power off based on board attribution switch.
Instance
RNC
ZWF21-20-022
RNC CP/UP Dynamic Resource Optimization
0..65535
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Only the UE context number is less than the parameter

the UE rrc connection drop.
less the UE rrc connection drop.
Consider to decrease the impact on call drop KPI, the UE number
Reason
threshold is set low.
Change Take Effect
New Connection
No
2-154
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.107 Time to wait Service auto hang off before Board power off
Full Name
Time to wait Service auto hang off before Board power off
Abbreviated Name
brdPwrOffWaitTim
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Before the board power off, it will delay a period which the parameter
is configured in order that most service auto hang off.thus will
decrease the call drop rate.
Instance
RNC
ZWF21-20-020
(0..65535)s, step 1s
Unit
Default Value
90
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-155
SJ-20141209142030-013|2015-11-12 (R1.3)
function: This parameter indicates the delay time that RNC waits the
service auto release before the board power off.

If the time is set longer, UE number to auto release is more and
drop rate is lower.But the power off procedure is longer.If the power
off is based on attribution switch, it will cause the load of the other
attribution boards heavier.
If the time is set shorter, the board power off procedure is faster, and
the UE drop rate will increase.
mostly, the duration time of a CS service is about 90s.So RNC
Reason
consider decrease the UE call drop rate as well as make the board
power off procedure short.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.108 Switch of Faster L1 DCH synchronization

Full Name
Switch of Faster L1 DCH synchronization
Abbreviated Name
fastL1SyncSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the faster L1 DCH synchronization

function is enabled.
If this function is enabled, the RNC fills the Post-verification period
IE with TRUE during the DCH synchronization procedure, which
instructs the UE to perform faster L1 DCH synchronization.
If this function is disabled, the RNC does not set the Post-verification
period IE during the DCH synchronization procedure.
2-156
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-01-019
Faster L1 Synchronization
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the fast layer
1 synchronization function is enabled.

Configuration rule: The UE compatibility must be considered during
configuration.
If this switch is turned on, the layer 1 synchronization delay during
the DCH synchronization procedure can be reduced, but UEs not
supporting the fast layer 1 synchronization function may fail to
complete the DCH synchronization.
If this switch is turned off, the layer 1 synchronization delay during
the DCH synchronization procedure cannot be reduced.
The default is set to "Off" to avoid the incompatibility problem caused
Reason
by UEs that do not support the Post-verification period.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-157
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.109 CMP User Admission Control Threshold in Normal Running

Full Name
CMP User Admission Control Threshold in Normal Running
Abbreviated Name
norCmpUserAcThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the admission control threshold of the

number of users for the CMP board in normal operating state.
If the parameter is set to 0, the threshold is invalid, meaning that the
admission control based on the number of users is not required.
If the parameter is set to a non-zero value, the number of RRC
connection requests admitted by the CMP board per second cannot
exceed this threshold.
If the number of RRC connection requests received by the CMP
board per second exceeds this threshold, the extra part will be
directly refused.
Instance
RNC
ZWF21-01-002
(0..65535)times, step 1times
Unit
times
Default Value
V3: 480
V4: 2000
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-158
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the admission control
threshold of the number of users for the CMP board in normal

operating state.
Configuration rule: This parameter must be configured to an
appropriate value that will not cause a sharp increase of the system
load or a surge in signaling messages between boards.
If the value is too large, the load to be processed by the CMP
board increases sharply and a surge of signaling messages occurs
between boards. If the value is too small, the processing capability
of the CMP cannot be fully used, which may result in user access
failure.
The default is set in accordance with the maximum processing
Reason
capacity of the CMP board.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.110 DMP User Admission Control Threshold in Normal Running

Full Name
DMP User Admission Control Threshold in Normal Running
Abbreviated Name
norDmpUserAcThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-159
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the admission control threshold of the

number of users for the DMP board in normal operating state.
If the parameter is set to 0, the threshold is invalid, meaning that the
admission control based on the number of users is not required.
If the parameter is set to a non-zero value, the number of RRC
connection requests admitted by the DMP board per second cannot
exceed this threshold.
If the number of RRC connection requests received by the DMP
board per second exceeds this threshold, the extra part will be
directly refused.
Instance
RNC
ZWF21-01-002
(0..65535)times, step 1times
Unit
times
Default Value
V3: 120
V4: 100
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the admission control
threshold of the number of users for the DMP board in normal

operating state.
Configuration rule: This parameter must be configured to an
appropriate value that will not cause a sharp increase of the system
load or a surge in signaling messages between boards.
If the value is too large, the load to be processed by the DMP board
will increase sharply and a surge of signaling messages will occur
between boards. If the value is too small, the processing capability
of the DMP cannot be fully used, which may result in user access
failure.
The default is set in accordance with the maximum processing
Reason
capacity of the DMP board.
Change Take Effect
New Connection
2-160
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.111 Time of Waiting for CELL UPDATE After RNC Waiting

ACTIVE SET UPDATE COMPLETE/ RECONFIGURATION
COMPLETE of Hard Handover Timer Expiration UPDATE
COMPLETE Timer Expiration
Full Name
Time of Waiting for CELL UPDATE After RNC Waiting ACTIVE SET
UPDATE COMPLETE/ RECONFIGURATION COMPLETE of Hard
Handover Timer Expiration UPDATE COMPLETE Timer Expiration
Abbreviated Name
tWaitCelUpRlDact
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the waiting time length for CELL UPDATE
after RNC sending Radio Link Deactivation command after RB
Setup/Reconfiguration/Release Response Timer Expiration.
Start: The timer is started when the RNC sends a Radio Link
Deactivation command.
Stop: The timer is stopped on receipt of a CELL UPDATE message.
Expiry: If the RNC does not receive a CELL UPDATE message
from the UE at expiry of the timer, the RRC connection of the UE
is released.
Instance
RNC
ZWF21-01-008
2-161
SJ-20141209142030-013|2015-11-12 (R1.3)
1..500, step 1; Unit: 100ms
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The larger the parameter is, the longer the time it takes to wait for
the CELL UPDATE message from the UE is, the longer the call delay
is, and the higher the success rate for the call-reestablishment is.
The default value is set based on the call delay and call
Reason
re-establishment success rate.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.112 Virtual LAC Paging Support Indication

Full Name
Virtual LAC Paging Support Indication
Abbreviated Name
vLacPaingInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-162
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether this RNC supports virtual LAC

paging.
Instance
RNC
ZWF21-01-030
Expand Paging Area
Expanded Paging Area FG
0: No Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
supports virtual LAC paging.

Configuration rule: the function switch. If the RNC supports the
virtual LAC paging function, set the parameter to 1. Otherwise, set
it to 0.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-163
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.113 Additional Size for Uplink SIR Target Increasing When

Consecutive Error TB Occurs
Full Name
Additional Size for Uplink SIR Target Increasing When Consecutive

Error TB Occurs
Abbreviated Name
sirUpAddStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the additional step size to increase the

uplink SIR target if consecutive error TBs occur. If the last two
error TBs are consecutive when the SIR target will be increased,
the additional step size must be added to the SIR target increase
step size.
Instance
RNC
ZWF21-04-009
Power Control
Power Control FG
(0..1)dB, step 0.1dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-164
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the additional step
size to increase the uplink SIR target if consecutive error TBs occur.
Related factors: service quality and system capacity.
If the value is high, the SIR target is increased more rapidly
when consecutive error TBs occur. Accordingly, service quality is
improved, but system capacity is decreased.
If the value is low, the SIR target is increased more slowly when
consecutive error TBs occur. Accordingly, system capacity is
improved, but service quality is affected.
Adjustment suggestion: If an addition step size is not required when
consecutive error TBs occur, the value is set to 0 dB. If an addition
step size is required when consecutive error TBs occur, the value is
set to 0.1dB (or other values).
The value 0 indicates that an additional step size is not required for
Reason
increasing the SIR target in case of the occurrence of consecutive

error TBs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.114 Valid Time Window for the TB in Shield Period

Full Name
Valid Time Window for the TB in Shield Period
Abbreviated Name
validTimTbCovPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-165
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the valid time window for TBs in the
shielding period. In the time window after the shielding period of SIR
target increase, if the SIR target is increased again, an addition step
size is added to the SIR target increase step size. This additional
step size is calculated according to the error TB number in and
beyond the shielding period.
Instance
RNC
ZWF21-04-009
Power Control
Power Control FG
0..65535, step 1; Unit 10ms
Unit
10 ms
Default Value
0ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the valid time window
for TBs in the shielding period.

If the value is too high, the SIR target increase step size in the
second time may be increased even if the interval between
consecutive SIR target increases is long, which affects system
capacity.
If the value is too low, the SIR target increase step size in the second
time may be increased only when the interval between consecutive
SIR target increases is very short, which affects service quality.
Adjustment suggestion: If the SIR target increase step size does not
need to be increased when consecutive SIR target increase occurs,
the value is set to 0.
If the SIR target increase step size needs to be increased when
consecutive SIR target increase occurs, the value is set to 40 (400
ms).
The value 0 indicates that the SIR target increase step size does not
Reason
need to be increased when consecutive SIR target increase occurs.
Change Take Effect
2-166
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.115 The Waiting Timer for UE Handover When Board's Power is

Off
Full Name
The Waiting Timer for UE Handover When Board's Power is Off
Abbreviated Name
boardPwrOffHoTmr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for waiting UEs hand over to 2G
or DSCR when a board is powered off. When the timer expires,
the CS service releases the RRC, and the PS service releases the
DSCR.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0..65535)s, step 1s
Unit
Default Value
10s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-167
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: timer for waiting UEs hand over to 2G or DSCR
when a board is powered off

Related factors: user experience and power-off time
The smaller this parameter is, the faster the board is powered off,
and the worse the user experience is. The larger this parameter is,
the more slowly the board is powered off, and the better the user
experience is.
The default parameter value is set based on the power-off time and
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.116 Maximum Call Capacity

Full Name
Maximum Call Capacity
Abbreviated Name
maxCallCapability
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum call processing capacity of

the object.
Instance
RNC
N/A
N/A
N/A
2-168
SJ-20141209142030-013|2015-11-12 (R1.3)
0..65535
Unit
KErl
Default Value
237
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
It should be set according to the actual conditions.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.117 Maximum Data Process Capacity

Full Name
Maximum Data Process Capacity
Abbreviated Name
maxThroughput
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum data processing capacity of

the object.
2-169
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
N/A
0..65535
Unit
Mbyte/s
Default Value
5250
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.118 Load Balance Parameter in MSC Pool

Full Name
Load Balance Parameter in MSC Pool
Abbreviated Name
mscpoolBalanceNum
Managed Object
2-170
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Load Balance parameter of the object

in MSC Pool.
Instance
RNC
N/A
N/A
N/A
0..100
Unit
Default Value
[100, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Related Parameters
N/A
N/A
Parameters
Data Type
long[16]
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-171
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.119 Load Balance Parameter in SGSN Pool

Full Name
Load Balance Parameter in SGSN Pool
Abbreviated Name
sgsnpoolBalanceNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Load Balance parameter of the object

in SGSN Pool.
Instance
RNC
N/A
N/A
N/A
0..100
Unit
Default Value
[100, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Related Parameters
N/A
N/A
Parameters
Data Type
long[16]
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-172
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.1.120 Switch of Optimization When Load Balance Fail

Full Name
Switch of Optimization When Load Balance Fail
Abbreviated Name
balFailOpSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch that enables or disables optimization upon

load balancing failure during the RAB establishment procedure.
When the switch is turned on, the RNC attempts to establish a
RAB on the original carrier if load balancing occurs during an
RAB establishment procedure but the UE responds with a failure
message.
When the switch is turned off, the RNC determines that an RAB
establishment procedure fails if load balancing occurs during the
procedure but the UE responds with a failure message.
Instance
RNC
ZWF21-04-011
Load Balancing
Load Balance FG
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-173
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: This parameter indicates whether the
optimization function is enabled for load balancing failure during the

RAB establishment procedure.
Configuration rule: The network requirements must be considered
during configuration.
If this switch is turned on, the optimization can improve the RAB
establishment success ratio when the load balancing strategy is
used during the RAB establishment procedure.
If this switch is turned off, the optimization will not be performed
and no improvement of RAB establishment success ratio can be
achieved.
The default is set to "Off". The optimization function can be enabled
Reason
in accordance with the network requirement.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.121 Switch of RNC Send RL SETUP and ACTIVE SET UPDATE

Parallelly when Soft Add Handover
Full Name
Switch of RNC Send RL SETUP and ACTIVE SET UPDATE

Parallelly when Soft Add Handover
Abbreviated Name
parallelSoftHO
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-174
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is a switch that determines whether the RNC

supports parallel transmission of messages over the Iub and Uu
interfaces during soft handover.
When the switch is turned on, the RNC sends an active set update
message over the Uu interface and an RL SETUP message over
the Iub interface in parallel during the soft handover procedure.
When the switch is turned off, the RNC completes the RL SETUP
procedure on the Iub interface first, and then starts the active set
update procedure on the Uu interface.
Instance
RNC
ZWF21-03-001
Handover control FG
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
supports parallel transmission of RL SETUP and ActiveSet Update

messages during the Soft Add procedure.
on whether it is required to reduce the delay during the soft handover
procedure.
When the switch is turned on, the RNC sends an ActiveSet Update
message over the Uu interface and an RL SETUP message over
the Iub interface in parallel during the Soft Add procedure. The
parallel message transmission reduces the delay during the Soft
Add procedure.
When the switch is turned off, the RNC triggers an RL SETUP
procedure on the Iub interface, and then triggers an ActiveSet
Update procedure on the Uu interface.
2-175
SJ-20141209142030-013|2015-11-12 (R1.3)
The default is set to "On" because this function can be used to
Reason
reduce the soft handover delay in most scenarios.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.122 Switch of DSCR in transferring unsuccessfully from

Common Status to CELL_DCH status
Full Name
Switch of DSCR in transferring unsuccessfully from Common Status

to CELL_DCH status
Abbreviated Name
dscrInCmnToDedSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the function switch for an RNC to execute

a DSCR procedure when a UE fails to transfer from common
connected RRC status to dedicated connected RRC status and
returns a configuration-related failure cause.
Instance
RNC
ZWF21-03-008
Directed Signaling Connection Re-establishment
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
0: off
2-176
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for an RNC to execute a DSCR
procedure when a UE fails to transfer from common connected

RRC status to dedicated connected RRC status and returns a
configuration-related failure cause.
Related factors: the number of UE RRC status transferring
failures in case of UE RRC status transferring failure with a
configuration-related failure cause.
If the parameter is set to "1" (On), the function is enabled. When
a UE fails to transfer from common RRC status to dedicated
RRC status and returns a specified cause (such as configuration
unsupported, protocol error, invalid configuration, or configuration
incomplete), the RNC executes a DSCR procedure. In this case,
the UE enters IDLE status and re-establishes an RRC connection,
which protects the UE from remaining in common status with no
chance of transferring large amount of data.
If this parameter is set to "0" (Off), the function is disabled.
The default value is set to "0" (Off). This function can be enabled
Reason
as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.123 Imei blacklist Switch

2-177
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Imei blacklist Switch
Abbreviated Name
imeiBlackSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter is the switch of IMEI blacklist. When this switch is

on, the UEs saved in IMEI blacklist could use different strategy in
some specified using cases.e.g.CS forbidden to be balanced during
RAB assignment.
Instance
Rnc
ZWF27-02-001
User Equipment Fault Aversion
User Equipment Fault Aversion FG
0: off
1: on
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the switch of IMEI blacklist.
Related factor: Set this parameter based on whether the IMEI shall
use different strategy in specified using case.
If the switch is on, then the IMEI shall use different strategy in some
specified using cases.e.g.CS forbidden to be balanced during RAB
assignment.
If the switch is off, all UE use same strategy.
The default value is set based on the carrier requirements.
Reason
Change Take Effect
No
2-178
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.124 Son Transfer Response Switch

Full Name
Son Transfer Response Switch
Abbreviated Name
sonTransRespSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch for response to LTE SON Transfer

requests.
If this switch is turned off, the RNC will discard all received SON
Transfer request messages without response.
If this switch is turned on, the RNC will send a response message
containing the required cell load information to the LTE upon
receiving a SON Transfer request message.
Instance
RNC
ZWF21-03-026
0: False
1: True
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-179
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
responds to SON Transfer request messages from the LTE.

whether the SON Transfer function is required in the network.
Adjustment suggestion: Negotiation with the operator is required to
determine whether to enable this function.
The default is set to "False", which can be modified in accordance
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.125 The period of RNC starting the SON Transfer.

Full Name
The period of RNC starting the SON Transfer.
Abbreviated Name
sonTransReqPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time interval that the RNC uses the
SON Transfer function to query inter-RAT cell load information.
Instance
RNC
ZWF21-03-026
2-180
SJ-20141209142030-013|2015-11-12 (R1.3)
(0..65535) s, step: 1 s
Unit
Default Value
300
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Because the load of a cell changes dynamically,
the RNC cannot query the cell load information in real time. The
RNC can only periodically query cell load information.
Related factors: Two factors must be considered: the load
information accuracy of inter-RAT neighbor cells, and load increase
due to a large number of messages caused by the SON Transfer
function. The two factors must be balanced.
If the value is too large, the inter-RAT neighbor cell load information
stored at the RNC may be inaccurate, which may cause an incorrect
handover decision.
If the value is too small, the load to be processed by the RNC boards
and the number of messages between the boards may increase,
may have a negative impact on the entire system.
The default value is set based on the maximum processing capacity
Reason
of hardware and the accuracy of load information about LTE

neighboring cells.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Version4.14.10.12/Version3.14.10.12
EC614004009989
2-181
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.126 Son Transfer Request Number Threshold in one second

Full Name
Son Transfer Request Number Threshold in one second
Abbreviated Name
sonTransReqNumThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the number of messages

per second that initiate a query of load information of inter-RAT cells.
If the number of query messages in the RNC exceeds this threshold,
the extra messages are discarded.
Instance
RNC
ZWF21-03-026
(0..65535), step: 1
Unit
times
Default Value
20
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter is used for flow control.
Related factors: This parameter must be set to an appropriate value,

which does not cause a great increase in the system load or in the
number of messages between boards.
Adjustment suggestion: If the value is too large, both the system
load and the number of messages between boards will increase
greatly. If the value is too small, the RNC cannot obtain the load
information of inter-RAT cells in a timely manner, which may affect
handover timeliness.
The default value is set based on the maximum inter-board
Reason
processing capacity.
2-182
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
EC614004009989
2.1.127 Response the Son Transfer message Number Threshold

in one second
Full Name
Response the Son Transfer message Number Threshold in one

second
Abbreviated Name
sonTransRespNumThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

per second that are received from the inter-RAT for querying the
load information of RNC cells.
If the number of query request messages received from the
inter-RAT exceeds this threshold, the RNC discards the extra
messages.
Instance
RNC
ZWF21-03-026
(0..65535), step: 1
Unit
times
Default Value
20
Related Parameters
N/A
2-183
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No

greatly. If the value is too small, the RNC cell load information
cannot be sent to inter-RAT cells in a timely manner, which may
affect handover timeliness.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
EC614004009989
2.1.128 Inter System Handover with Consideration of Eutran Load

Support Indicator
Full Name
Inter System Handover with Consideration of Eutran Load Support

Indicator
Abbreviated Name
ldBsdEutranHOInd
Managed Object

2-184
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to consider the load state of the

target cell when the RNC determines the inter-RAT handover.
Instance
RNC and PLMN
ZWF21-03-026
Target cell Load based inter-RAT HO FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: inter-RAT handovers based on EUTRAN load
Effect:
If the parameter is "On", the handover will be more efficient. The
UMTS can acquire the load condition in EUTRAN, the inter-RAT
handover based on EUTRAN load is taken into consideration in
order to avoid access failure in EUTRAN caused by overload in
EUTRAN system. However, at the same time UEs may drop calls
because they are forbidden to hand over to EUTRAN.
If the parameter is "Off", access to EUTRAN may fail due to overload
of GMS.
The default parameter value is set based on user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-185
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.1.129 Number of Periodic Creating Cells

Full Name
Number of Periodic Creating Cells
Abbreviated Name
numPeriodCreatCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of cells that can be established

per unit time on the power-on phase of the system.
Instance
RNC
ZWF21-20-003
Cell Management
Node Management FG
V3: 0..200, step 1;

V4: 0..400, step 1
Unit
times
Default Value
V3: 6
V4: 6
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-186
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter limits the number of cells that
can be established per unit time on the power-on phase of the RNC.
Configuration rule: The parameter must be configured to an
appropriate value that ensures successful establishment of all cells.
In addition, the establishment of too many cells at a time must be
prevented because it may cause a surge of access requests and a
sharp increase of load on the boards.
If the value is too large, too may cells will be established per unit
time, which may cause a surge of access requests and a sharp
increase of load on the boards.
If the value is too small, the RNC will take a long time to enter the
proper operating status after power on, which may cause call drops
during a long period and commercial services will be abnormal.
The default is set to ensure that the RNC can successfully establish
Reason
all cells without causing a surge of access requests, a sharp

increase of board load, or the deterioration of KPIs.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.130 Number of Cells Updating SIB3 When Starting the DSAR

according to the Iu
Full Name
Number of Cells Updating SIB3 When Starting the DSAR according

to the Iu
Abbreviated Name
startDsarCelNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-187
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the number of cells that update SIB3

each time to broadcast DSAR related IEs when the Iu interface is
overloaded or is not accessible.
Instance
RNC
ZWF21-01-018
Domain Specific Access Restriction (DSAR)
Domain Specific Access Restriction FG
1..65535
Unit
N/A
Default Value
50
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Number of cells that update SIB3 when the lu
interface is overloaded or inaccessible.

Related factors: the load of the lu interface and the air interface
signaling of other carrier frequencies or systems.
The smaller the parameter value, the shorter the time interval for
updating SIB3 when the lu interface is overloaded or inaccessible.
Therefore, the load of the lu interface decreases quickly, it is more
likely to result in an lu interface overload ping-pong situation, and the
signaling messages on the air interface of other carrier frequencies
or systems may increase tremendously within a very short period.
The bigger the parameter value, the longer the time interval for
updating SIB3. Therefore, the load of the lu interface decreases
slowly, it is more unlikely to result in an lu interface overload
ping-pong situation, and the signaling messages on the air
interface of other carrier frequencies or systems may not increase
tremendously within a very short period.
This parameter is set based on the load of Iu interface and the
Reason
signaling on the air interface of other frequencies/systems.
Change Take Effect
No
2-188
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.131 Time Interval Updating SIB3 among Cells When Starting

the DSAR according to the Iu
Full Name
Time Interval Updating SIB3 among Cells When Starting the DSAR
according to the Iu
Abbreviated Name
startDsarCelInt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time interval for updating SIB3 each
time among cells to broadcast DSAR related IEs when the Iu
interface is overloaded or is not accessible.
Instance
RNC
ZWF21-01-018
(1..65535)s, step 1s
Unit
Default Value
20
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-189
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: the time interval of cells that update SIB3 when
the lu interface is overloaded or inaccessible.

Related factors: the load of the lu interface and the air interface
signaling of other carrier frequencies/systems.
updating SIB3 when the lu interface is overloaded or inaccessible.
Therefore, the load of the lu interface decreases quickly, it is more
likely to result in an lu interface overload ping-pong situation,
and the signaling messages on the air interface of other carrier
frequencies/systems may increase tremendously within a very short
period.
updating SIB3. Therefore, the load of the lu interface decreases
ping-pong situation, and the signaling messages on the air interface
of other carrier frequencies/systems may not increase tremendously
within a very short period.
Reason
signaling on the air interface of other frequencies/systems.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.132 Number of Cells Updating SIB3 When Stopping the DSAR

According to the Iu and When Changing the DSAR Switch
Full Name
Number of Cells Updating SIB3 When Stopping the DSAR According

to the Iu and When Changing the DSAR Switch
Abbreviated Name
stopDsarCelNum
Managed Object

2-190
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of cells that update SIB3 each
time to remove DSAR related IEs if the Iu interface recovers from
the overloaded state or becomes accessible, or to broadcast or
remove DSAR related IEs if the parameter of DSAR (for example,
enable or disable DSAR at cell level) is modified through NetNumen.
Instance
RNC
ZWF21-01-018
1..65535
Unit
N/A
Default Value
40
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Number of cells whose SIB3 need to be updated
when the Iu interface recovers from the overloaded or inaccessible

status, or when the DSAR switch is modified through NetNumen.
Related factors: the load of the lu interface and the signaling
messages on the Uu interface of the frequency, and the signaling
messages on the air interface of other carrier frequencies/systems
(for the case of enabling DSAR through NetNumen).
The bigger the parameter value, the more the number of cells that
update SIB3 when the lu interface is recovered from overloaded or
inaccessible, or when the DSAR is disabled through NetNumen.
Therefore, the load of the lu interface increases faster, it is more
likely to result in an lu interface overload ping-pong situation, and
the signaling messages on the air interface of this system may
increase tremendously within a very short period.
The smaller the parameter value, the less the number of cells that
update SIB3 when the lu interface is recovered from overloaded
or inaccessible status, or when the DSAR is disabled through
NetNumen. Therefore, the load of the lu interface increases slowly,
2-191
SJ-20141209142030-013|2015-11-12 (R1.3)
it is more unlikely to result in an lu interface overload ping-pong

situation, and the signaling messages on the air interface of this
system may not increase tremendously within a very short period.
For the case of enabling DSAR though NetNumen, it is similar to
StartDsarCelNum.
Reason
signaling on the air interface.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.133 Time Interval Updating SIB3 among Cells When Stopping

the DSAR According to the Iu and When Changing the DSAR
Switch
Full Name
Time Interval Updating SIB3 among Cells When Stopping the DSAR
According to the Iu and When Changing the DSAR Switch
Abbreviated Name
stopDsarCelInt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time interval for updating SIB3 each
time to remove DSAR related IEs if the Iu interface recovers from
the overloaded state or becomes accessible, or to broadcast or
remove DSAR related IEs if the parameter of DSAR (for example,
enable or disable DSAR at cell level) is modified through NetNumen.
Instance
RNC
ZWF21-01-018
2-192
SJ-20141209142030-013|2015-11-12 (R1.3)
(1..65535)s, step 1s
Unit
Default Value
30
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: the time interval of cells whose SIB3 need to
be updated when the lu interface is recovered from overloaded or

inaccessible status, or when the DSAR switch is modified through
NetNumen.
Related factors: the load of the lu interface, the signaling messages
on the Uu interface of the frequency, and the signaling messages on
the air interface of other carrier frequencies/systems (for the case of
enabling DSAR through NetNumen).
updating SIB3 when the lu interface is recovered from overloaded
or inaccessible status or when the DSAR is disabled through
NetNumen. Therefore, the load of the lu interface may increases
quickly, and it is more likely to result in an lu interface overload
ping-pong situation, and the signaling messages on the Uu interface
of the frequency may increase tremendously within a very short
period.
updating SIB3. Therefore, the load of the lu interface increases
ping-pong situation, and the signaling messages on the Uu interface
of the frequency may not increase tremendously within a very short
period.
For the case of enabling DSAR though NetNumen, it is similar to
StartDsarCelInt.
Reason
signaling on the air interface.
Change Take Effect
No
2-193
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.134 Multi-cell E-DCH Transport Bearer Mode

Full Name
Multi-cell E-DCH Transport Bearer Mode
Abbreviated Name
mulEdchTrBearMod
Managed Object

3GPP Name
multi-cell E-DCH Transport Bearer Mode
3GPP Reference
TS 25.331
Description
This parameter indicates the bearer mode of multi-cell E-DCH

transmission.
If the value is set to Separate Iub Transport Bearer Mode or
Separate Iur Transport Bearer Mode, the mac-d flows from the
primary and secondary frequencies use separate Iubs or Iurs as
transmission bearers.
If the value is set to UL Flow Multiplexing Mode, the mac-d flows
from the primary and secondary frequencies are multiplexed on one
Iub or Iur as a transmission bearer.
Instance
RNC
ZWF26-03-004
DC-HSUPA
DC-HSUPA FG
0: Separate Iub/Iur Transport Bearer Mode

1: UL Flow Multiplexing Mode
Unit
N/A
Default Value
0: Separate Iub/Iur Transport Bearer Mode
Related Parameters
N/A
2-194
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the bearer mode of
multi-cell E-DCH transmission.

Related factors: transmission bearer capacity.
If Node B supports UL Flow Multiplexing Mode and Separate Iub
Transport Bearer Mode (or "Separate Iur Transport Bearer Mode"),
this parameter is valid.
If the value is Separate Iub/Iur Transport Bearer Mode, the mac-d
flows from the primary and secondary frequencies use separate
Iubs or Iurs as transmission bearers, which does not increase the
requirement of transmission bearers.
If the value is set to UL Flow Multiplexing Mode, the mac-d flows
from the primary and secondary frequencies are multiplexed on one
Iub or Iur as a transmission bearer, which minimizes transmission
bearer resources.
Separate Iub/Iur Transport Bearer Mode does not increase the
Reason
requirement of transmission bearers.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.135 Switch of Filtering the incomplete Neighboring Cells in SIB

Full Name
Switch of Filtering the incomplete Neighboring Cells in SIB
Abbreviated Name
fltIncmpNbrCelSwit
2-195
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the switch of filtering the incomplete

neighboring cells in SIB.If the value of the parameter is 1 (On), RNC
will filter the neighboring cells configured incompletely in SIB .If the
value of the parameter is 0 (Off), RNC will be unable to get the
information of the neighboring cells configured incompletely in SIB
successfully and will fail to send SIB information.
Instance
RNC
ZWF21-01-001
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: The parameter is the control switch of RNC
triggering to filter the incomplete neighboring cells in SIB.

Parameter controlling factor:
The parameter is added in order to avoid the cell rebuilding caused
by incomplete neighbor cell configuration in SIB.
If the function switch is turned on, then the neighboring cells
configured incompletely will be filtered in the process of SIB filling
out. Though the neighboring cells incompletely is configured in
OMMR, UE can not detect the neighboring cells.
If the function switch is turned off, SIB information will be filled out
unsuccessfully when there are the neighboring cells configured
incompletely and the cell maybe will be rebuilt repeatly until the
neighboring cell information is configured completely.
2-196
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value 1(On) is suggested for avoiding the cell rebuilding
Reason
caused by incomplete neighbor cell configuration in SIB.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.136 Admission Control Switch for High Priority Traffic when

Resource Congestion
Full Name
Admission Control Switch for High Priority Traffic when Resource

Congestion
Abbreviated Name
highPriAcSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the admission control switch for high

priority traffic in the case of E-DCH user number resource
congestion in CELL_DCH state. If this parameter is set to "1: On"
and the number of E-DCH users is limited, higher priority E-DCH
users can use E-DCH resources while lower priority users migrate
to DCH channels or CELL_FACH state to guarantee the UL QoS of
higher priority users. Notes: The priority here means the Scheduling
Priority (SchPrio). The high priority E-DCH user here means that
the SchPrio of the new E-DCH user is higher than that of an online
E-DCH user.
Instance
RNC
ZWF25-04-001
Admission Control for HSUPA Service
2-197
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: admission control switch for high priority
traffic in the case of E-DCH user number resource congestion

in CELL_DCH state. If this parameter is set to "1: On" and the
number of E-DCH users is limited, higher priority E-DCH users can
use E-DCH resources while lower priority users migrate to DCH
channels or CELL_FACH state to guarantee the UL QoS of higher
priority UEs.
Notes: The priority here means the Scheduling Priority (SchPrio).
The high priority E-DCH user here means that the SchPrio of the
new E-DCH user is higher than that of an online E-DCH user.
Related factors: whether the high priority E-DCH service is set up
on E-DCH when the number of E-DCH users is limited.
If the parameter is set to "On", the high priority E-DCH service will
be set up on E-DCH when the number of E-DCH users is limited
and low priority E-DCH users exist in the cell. If the parameter is
set to "Off", the high priority E-DCH service will be set up on other
channels except E-DCH when the number of E-DCH users is limited.
This is a new function. To ensure the system runs properly, the
Reason
default value is set to "Off".
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-198
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.1.137 Inter-frequency Handover Method

Full Name
Inter-frequency Handover Method
Abbreviated Name
interHoMth
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the inter-frequency handover

uses the periodical method or event method. If this parameter is
set to periodical method, inter-frequency measurement reports
are periodically reported. If this parameter is set to event method,
inter-frequency measurement reports are reported by triggering
the event.
Instance
RNC
ZWF21-03-003
Handover Control FG
0: Periodical Method
1: Event Method
Unit
N/A
Default Value
Event Method
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-199
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: whether the inter-frequency handover uses the
periodical method or event method

Related factors: signaling overhead and flexibility of handover
algorithm
If this parameter is set to periodical method, inter-frequency
measurement reports are periodically reported. The advantage of
the periodical measurement report mode is that handover algorithm
can be more flexible. The disadvantage is that it increases the
signaling overhead of the air interface.
The default parameter value is set based on signaling overhead and
Reason
flexibility of handover policies.
Change Take Effect
Ongoing Connection(at best cell changed)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.138 Inter-RAT Handover Method

Full Name
Inter-RAT Handover Method
Abbreviated Name
intRatHoMth
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the inter-RAT handover uses

the periodical method or event method. If this parameter is set to
periodical method, inter-RAT measurement reports are periodically
reported. If this parameter is set to event method, inter-RAT
measurement reports are reported by triggering the event.
Instance
RNC
2-200
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
0: Periodical Method
1: Event Method
Unit
N/A
Default Value
Event Method
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: whether the inter-RAT handover uses the
periodical method or event method

Related factors: signaling overhead and flexibility of handover
algorithm
If this parameter is set to periodical method, inter-RAT measurement
reports are periodically reported. The advantage of the periodical
measurement report mode is that handover algorithm can be more
flexible. The disadvantage is that it increases the signaling overhead
of the air interface.
The default parameter value is set based on signaling overhead and
Reason
flexibility of handover policies.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-201
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.139 Switch of Fast Reconfiguration Function for Relocating

into DRNC
Full Name
Switch of Fast Reconfiguration Function for Relocating into DRNC
Abbreviated Name
relocFastCfgInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the fast reconfiguration function

is enabled during relocation to the DRNC.
Instance
RNC
ZWF21-01-024
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter is a switch that enables or
disables the fast reconfiguration function for relocating to the DRNC.

on whether the RNC and the Node B support fast reconfiguration.
When this switch is turned on, fast configuration is enabled
for relocating to the DRNC. Compared to synchronization
reconfiguration, the fast reconfiguration for relocation reduces
the probability that the relocation message is blocked on the Uu
interface due to measurement and control messages and improves
the relocation success ratio.
2-202
SJ-20141209142030-013|2015-11-12 (R1.3)
The fast reconfiguration for relocation can be enabled only when

both the RNC and the Node B support fast reconfiguration.
When this switch is turned off, the synchronization reconfiguration
is used for relocation. Compared to fast reconfiguration, the
synchronization reconfiguration increases the probability that
the relocation message is blocked on the Uu interface due to
measurement and control messages.
The default is set to "Off" because the fast reconfiguration function
Reason
is rarely used in most scenarios.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.140 The Switch for the EMI Function in CDT-CR

Full Name
The Switch for the EMI Function in CDT-CR
Abbreviated Name
emiMeasInCDTSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to collect data related to EMI at

CDT-CR level. CDT-EMI is used to assess the average QoS of a UE
in a voice call. When calculating the EMI, the NetMAX optimization
tool is required.
Instance
RNC
N/A
N/A
EMI FG
2-203
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether to collect data to assess
the average QoS of a voice call for each UE.

Related factors: the EMI data collection requirements and the CPU
load of the DMP.
This function is enabled when it is required. If this function is
Reason
enabled, the CPU load of the DMP board will increase.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.141 Inter-rat Cell Information indication Strategy

Full Name
Inter-rat Cell Information indication Strategy
Abbreviated Name
ratCelInfoSwch
Managed Object

3GPP Name
N/A
2-204
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
If the inter-RAT measurement is initialized, and an intra-frequency

handover is triggered, the inter-RAT measurement will be
updated/modified. The RNC may receive UE reports based
on original inter-RAT measurement configuration due to the
transmission delay of radio interface. RatCelInfoSwch is used to
control the policy. If it is set to 1, the measurement report based
on original inter-RAT measurement configuration will be handled
to improve handover timeliness.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: If the inter-RAT measurement is initialized,
and an intra-frequency handover is triggered, the inter-RAT

measurement will be updated/modified. The RNC may receive UE
reports based on original inter-RAT measurement configuration
due to the transmission delay of radio interface. RatCelInfoSwch
is used to control the policy. If it is set to "On", the measurement
report based on original inter-RAT measurement configuration will
be handled, which may cause a handover to improper cells.
Related factors: mobile continuity
When the switch is Off, the inter-RAT measurement reports will not
be handled.
The default parameter value is set based on mobile continuity.
Reason
Change Take Effect
2-205
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.142 Paging Type1 Response Timer

Full Name
Paging Type1 Response Timer
Abbreviated Name
paging1RspTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for the RNC to receive the
response to a Type 1 Paging message.
Instance
RNC
ZWF21-01-003
Paging
(1..60)s, step 1s
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-206
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the timer for the RNC
to receive the response to a Type 1 Paging message. If the timer

value is too small, the RNC may not receive the response message
before the timer expires. If the timer value is too large, it may waste
system time and cause instance release.
This parameter is set according to previously used values.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.143 Maximum Satellite Number in Position measurement

Control Message
Full Name
Maximum Satellite Number in Position measurement Control

Message
Abbreviated Name
maxCfgSatNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of satellites in a

Positioning Measurement Control message.
Instance
RNC
ZWF21-10-002
LCS with A-GPS
Location Service FG
1..16
2-207
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter Function: This parameter indicates the maximum number
of satellites in a Positioning Measurement Control message. If the

parameter value is too small, it is not good for UE positioning. If the
parameter value is too large, the Uu Measurement Control message
is too long and may block other Uu messages.
This parameter is set to 6 according to the laboratory test result.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.144 Switch of Permit PS Handover from LTE to UTRAN Because

of CSFB
Full Name
Switch of Permit PS Handover from LTE to UTRAN Because of

CSFB
Abbreviated Name
psL2USwchByCs
Managed Object

2-208
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch that determines whether CSFB-triggered

PS handover from the LTE is allowed.
When this switch is turned on, CSFB-triggered PS handover from
the eNode B to the RNC is allowed, and the subsequent CS traffic
access to the RNC is allowed too.
When the switch is turned off, CSFB-triggered PS handover from
the eNode B to the RNC is not allowed.
Instance
RNC
ZWF21-03-101
CS Fallback from LTE Support
CS Fallback from LTE Support FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
allows CSFB-triggered PS handover from the LTE to the UTRAN.

Configuration rule: The function requirement of the operator and
the license controlling the function must be considered during
configuration.
If this function is enabled, the voice call completion ratio between
LTE and UMTS will be increased, and the PS service drop ratio will
be decreased. If this function is disabled, LTE users must release
PS traffic before reselecting the UMTS network, which results in a
delay of service response and influences the user experience.
This function can be enabled only when the operator has purchased
Reason
the required license.
Change Take Effect
New Connection
No
2-209
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.145 Switch of Optimization When UCIU ERROR

Full Name
Switch of Optimization When UCIU ERROR
Abbreviated Name
uciuErrorOpSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the functional switch that enables or

disables the optimization of slow service release in case of UCIU
ERROR.
Instance
RNC
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-210
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the functional switch
that enables or disables the optimization of slow service release in

case of UCIU ERROR. When the optimization is enabled, the RNC,
upon receipt of a UCIU ERROR message when waiting for the
completion of an active set update, immediately initiates a service
release procedure instead of triggering the call re-establishment
after making a decision of handling the call drop.
Related factor: whether the function is enabled.
Configuration effect: The optimization function allows faster service
release when the RNC receives a UCIU ERROR message during
the active set update procedure, which speeds up service release
and improves the resource utilization.
The default setting is "0: Off", and can be changed to "1: On" as
Reason
needed.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.146 Switch of Optimization When RL FAILURE

Full Name
Switch of Optimization When RL FAILURE
Abbreviated Name
rlFailureOpSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the functional switch that enables or

disables the optimization of slow service release in case of RL
FAILURE.
Instance
RNC
2-211
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the functional switch
that enables or disables the optimization of slow service release in

case of RL FAILURE. When the optimization is enabled, the RNC,
upon receipt of an RL FAILURE message during the active set
update procedure, immediately initiates a service release procedure
instead of triggering call re-establishment after making a decision
of handling the call drop.
Configuration effect: The optimization function allows faster service
release when the RNC receives an RL FAILURE message during
the active set update procedure, which speeds up service release
and improves the resource utilization.
The default setting is "0: Off", and can be changed to "1: On" as
Reason
needed.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-212
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.147 Switch of whether to discard redirection

LU-Reject/Attach-Reject when the link of subsequent
Iu is break
Full Name
Switch of whether to discard redirection LU-Reject/Attach-Reject

when the link of subsequent Iu is break
Abbreviated Name
discCNUpdReject
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether RNC discards redirection

LU-Reject/Attach-Rej when the link of subsequent Iu is broken.
Instance
RNC
ZWF21-30-103
0: Discard
1: No Discard
Unit
N/A
Default Value
0: Discard
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-213
SJ-20141209142030-013|2015-11-12 (R1.3)
discards rerouting LU-Reject/Attach-Rej when the link of subsequent

Iu is broken.
Related factors: Whether the carrier requires the UE to continue
doing LU/Attach or not. If the carry requires update attempts, set
it to discard rerouting LU-Reject/Attach-Rej. In some networks,
if rerouting LU-Reject/Attach-Rej is not discarded, it may be
considered by customers as rejected by the PLMN, and thus they
may stop location update attempts.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.148 Switch of DSAR

Full Name
Switch of DSAR
Abbreviated Name
dsarSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the DSAR function is enabled at

the RNC level.
When this function is enabled, if the Iu-PS or Iu-CS is overloaded or
interrupted, the RNC notifies users of different access classes not
to access services in this domain through SIB3 messages based
on the configuration of each cell.
Instance
RNC
2-214
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-01-018
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the DSAR
function is enabled at the RNC level.

Related factor: the carrier's requirements.
Adjustment suggestion: To restrict UEs of the specified access
class not to initiate INITIAL DIRECT TRANSFER messages when
the lu interface is overloaded, or indicate UEs to reselect another
frequency or the RAT system when the Iu-CS is interrupted and thus
the cell is barred, enable this function.
This function is under control of the license. By default, it is disabled.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-215
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.149 Switch off Frequency Intelligently Function

Full Name
Switch off Frequency Intelligently Function
Abbreviated Name
closeFreFunSwit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable or disable the intelligent

carrier closing function. The value "1: On" means that automatically
closing a cell is allowed.
Instance
RNC
ZWF21-20-017
Intelligent Carrier Power off/on
Intelligent Carrier Power off/on FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether to enable the
intelligent carrier closing function.

Configuration rule: This function is controlled by the license. If
the operator has purchased this function, the operator has the
permission to provide this function.
Adjustment suggestion: Enabling this function can save power.
It must be configured by a network planning and optimization
Reason
engineer according to the operator's power saving requirements.
Change Take Effect
No
2-216
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.150 RNC Switch for Handover Based on UL BLER

Full Name
RNC Switch for Handover Based on UL BLER
Abbreviated Name
rncUlBlerHoSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the global handover switch based on the

uplink BLER. If this switch is turned off, the function is disabled.
If this switch is turned on, the RNC checks the cell-level switch
UlBlerHoSwch, and then determines whether to enable the function.
Instance
RNC
ZWF21-03-013
Quality Based Handover
Quality Based Handover FG
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-217
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: This parameter indicates the global handover
switch based on the uplink BLER.

Related factor: license. This switch can be enabled only after the
carrier has purchased the license.
After this switch is turned on, the service performance can be
ensured in the scenario where the uplink BLER is very high but
the service QoS is poorer.
The default setting is based on whether the carrier has purchased
Reason
the license.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.151 RNC Switch for Handover Based on UE Tx Power

Full Name
RNC Switch for Handover Based on UE Tx Power
Abbreviated Name
rncTxPwrHoSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the global handover switch based on the

UE transmit power. When this switch is turned off, the function
is disabled. When this switch is turned on, the RNC checks the
cell-level switch UlPwrHoSwch/DlPwrHoSwch, and then determines
whether to enable the function.
Instance
RNC
ZWF21-03-012
2-218
SJ-20141209142030-013|2015-11-12 (R1.3)
Transmitted Power Based Handover
Transmitted Power Based Handover FG
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the global handover
switch based on the UE transmit power.

Related factor: license. This switch can be enabled only after the
carrier has purchased the license.
After this switch is turned on, the service performance can be
ensured in the scenario where the uplink/downlink power is very
high but the service QoS is poorer.
The default setting is based on whether the carrier has purchased
Reason
the license.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.152 Smooth admission time when sscop congestion

disappeared
2-219
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Smooth admission time when sscop congestion disappeared
Abbreviated Name
sscopSmoothTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the duration that it takes to admit all UEs
after the SSCOP link congestion disappears.
Instance
N/A
ZWF21-04-001
Admission Control
Admission Control FG
(0..600)s, step 1s
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the duration it takes to
admit all UEs after SSCOP link congestion disappears.

Configuration rule: SSCOP congestion level, user capacity, and
system security.
If the value is greater, the restoration duration after SSCOP
congestion disappears is shorter, the probability of SSCOP
congestion is lower, and the system is more secure.
If the value is smaller, the restoration duration after SSCOP
congestion disappears is longer, the probability of SSCOP
congestion is higher, and the system is less secure.
The default value considers system security first of all.
Reason
Change Take Effect
No
2-220
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.153 IMEI Based Power Control Function Switch

Full Name
IMEI Based Power Control Function Switch
Abbreviated Name
imeiPcFunSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for the IMEI-based power

control function. When this switch is turned on, power control
parameters can be configured based on the IMEI.
Instance
Rnc
ZWF27-02-001
User Equipment Fault Aversion
User Equipment Fault Aversion FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-221
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the switch for the
IMEI-based power control function. If this switch is turned on, the

power control parameters can be configured based on the IMEI.
Configuration rule: set it as needed.
If this switch is turned on, different power control parameters can be
configured for different subscribers based on the IMEI.
If this switch is turned off, different power control parameters cannot
be configured for different subscribers based on the IMEI.
Set it as needed.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.154 Enhanced Handover Switch

Full Name
Enhanced Handover Switch
Abbreviated Name
enhanceHoSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-222
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
The parameter indicates a license switch that controls several

enhanced handover functions:
1: If the RNC is waiting reconfiguration complete message from
UE, and receives an ACK of AM RLC, then it will consider the UU
procedure is completed.
2: When the signal quality of the currently used frequency is poor,
whether intra-frequency handover will be performed.
3: When the signal quality of the currently used frequency is poor,
whether HSPA serving cell change will be performed.
4: When the signal quality of the currently best cell is poor, whether
redirection without measurement will be performed.
Instance
RNC
ZWF21-03-050
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: license switch that controls several enhanced
handover functions
Related factors: requirements of the operator (commercial affairs)
The default parameter value is set based on the requirements of
Reason
the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-223
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.1.155 LoggedMDT Switch

Full Name
LoggedMDT Switch
Abbreviated Name
loggedMDTSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RNC switch corresponding to the

LoggedMDT function. If this switch is turned on, the RNC may
send a LOGGING MEASUREMENT CONFIGURATION message
to a UE that supports the LoggedMDT function. When the UE
enters IDLE, CELL_PCH, or URA_PCH state, it performs the logged
measurement. In "camp normally" state, the UE logs measurement
results. If the measurement results are available, the UE informs
the RNC through the "Logged Meas Available" IE by sending
RRCConnectionSetupComplete, CELL UPDATE, URA UPDATE,
HANDOVER TO UTRAN COMPLETE, MEASUREMENT REPORT,
and UTRAN MOBILITY INFORMATION CONFIRM messages.
The RNC can send a UE INFORMATION REQUEST message to
request the UE to report logged measurement results. The network
side can optimize the network through measurement results.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
2-224
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the RNC switch
corresponding to the LoggedMDT function.

Related factor: network optimization.
Adjustment suggestion: To optimize the network by using the
LoggedMDT function, enable the switch.
The default setting is "0: Off".
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.156 Switch of self configuration MicroNodeb

Full Name
Switch of self configuration MicroNodeb
Abbreviated Name
mnbSelfCfgSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-225
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether MicroNodeb Self Configuration

is enabled.
If this function is enabled, the RNC supports the automatic
configuration of the PSC and neighboring cell information about
the micro NodeB.
If this function is disabled, the PSC and neighboring cell information
about the micro NodeB should be manually configured.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether MicroNodeb
Self Configuration is enabled.

Configuration rule: set it based on the network planning.
the micro NodeB. This improves the O&M efficiency and network
performance, and reduces the number of maintenance engineers
for network maintenance.
The default setting is based on the network planning.
Reason
Change Take Effect
No
2-226
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.157 Switch of self optimization MicroNodeb

Full Name
Switch of self optimization MicroNodeb
Abbreviated Name
mnbSelfOptmSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether MicroNodeb Self Optimization

is enabled.
the micro NodeB.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-227
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: This parameter indicates whether MicroNodeb
Self Optimization is enabled.

the micro NodeB. This improves the O&M efficiency and network
performance, and reduces the number of maintenance engineers
for network maintenance.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.158 MicroNodeb Number Threshold Used for self configuration

Full Name
MicroNodeb Number Threshold Used for self configuration
Abbreviated Name
mnbThrdSelfCfg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the MicroNodeb number threshold used

for the self configuration per process in unit time.
Instance
RNC
N/A
2-228
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
(1..65535)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the MicroNodeb
number threshold used for the self configuration every five seconds.
Related factor: The effect caused by the self configuration of the
micro NodeB on the load of the RNC.
The larger the setting, the higher the load of the RNC.
The smaller the setting, the lower the load of the RNC.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.159 MicroNodeb Number Threshold Used for self optimization

Full Name
MicroNodeb Number Threshold Used for self optimization
Abbreviated Name
mnbThrdSelfOptm
2-229
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the MicroNodeb number threshold used

for the self optimization per process in unit time.
Instance
RNC
N/A
N/A
(1..65535)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
number threshold used for the self optimization every five seconds.
Related factor: The effect caused by the self optimization of the
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-230
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.1.160 Rnc Load Sharing In Pool Support Indicator

Full Name
Rnc Load Sharing In Pool Support Indicator
Abbreviated Name
rncLdInPoolSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to provide the load sharing

between RNCs in the RNC POOL.
Instance
Rnc
ZWF21-30-207
RNC Pool for resource sharing
RNC Pool for resource sharing FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether to provide the load sharing
between RNCs in the RNC POOL.

Configuration rule: If the load sharing function is needed, set the
parameter to 1. If the load sharing function is unnecessary, set the
parameter to 0.
By default, the load sharing function is not provided.
Reason
2-231
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.161 Number of PSC to Reserve for Pico Cell

Full Name
Number of PSC to Reserve for Pico Cell
Abbreviated Name
reservedPscNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of PSCs that need to be

reserved.
Instance
RNC
N/A
N/A
Small Cell Package
0DBS_RR_MAX_NUM_PSC
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Don't Care
Negotiation With CN
No
2-232
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: This parameter indicates the number of PSCs
reserved for a PICO cell. The value 0 indicates that no PSC is

reserved, and the DBS_RR_MAX_NUM_PSC parameter is set to
50.
Configuration rule: This parameter is determined in network
planning.
The default value is set based on network planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.1.162 Reserved PSC Number for Pico Cell

Full Name
Reserved PSC Number for Pico Cell
Abbreviated Name
reservedPsc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a reserved PSC number.
Instance
RNC
N/A
N/A
Small Cell Package
0..511
Unit
N/A
2-233
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
N/A
Related Parameters
ReservedPscNum
The valid length of the array is determined by the ReservedPscNum
Parameters
parameter.
Data Type
WORD
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the reserved PSC
number.
planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.1.163 Function Switch of Congestion Control of HSUPA vs R99

Fairness
Full Name
Function Switch of Congestion Control of HSUPA vs R99 Fairness
Abbreviated Name
upaR99FarSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-234
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the switch of the fairness congestion

control algorithm for HSUPA and R99 users.
Instance
RNC
ZWF25-01-036
DCH/HSUPA Fairness
DCH/HSUPA Fairness FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the switch of the
fairness congestion control algorithm for HSUPA and R99 users.

Related factor: the carrier's operation strategy.
If this parameter is set to "0: Off", R99 services have a higher
priority than HSUPA services in resource allocation, and the user
experiences of HSUPA services cannot be guaranteed. If this
parameter is set to "1: On", the fairness between R99 and HSUPA
services is considered: When the cell enters HSUPA unhappy state,
the rate of R99 services is properly restricted, so that the user
experiences of HSUPA services can be improved.
The default setting is based on the carrier's operation strategy.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-235
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.1.164 Function Switch of RoT Adjustment Dynamically

Full Name
Function Switch of RoT Adjustment Dynamically
Abbreviated Name
rotAdjstSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the function switch for adjusting the RoT
dynamically.
Instance
RNC
ZWF21-04-015
Dynamic RoT Control
Dynamic RoT Control FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-236
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the function switch for
adjusting the RoT dynamically.

Related factors: HSUPA throughput and the uplink coverage of the
cell.
If this switch is turned off, the RoT is a fixed value. If the RoT is set
too large, the uplink coverage of the cell is affected. If the RoT is set
too small, the HSUPA throughput is lower.
If this switch is turned on, the RoT is dynamically adjusted in
accordance with the services in the cell, and the optimum uplink
coverage and HSUPA throughput are obtained.
The default setting is based on the HSUPA throughput and the
Reason
coverage of the cell uplink.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.165 Partner Service Detection Period

Full Name
Partner Service Detection Period
Abbreviated Name
partnerSrvPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the user-plane's detection period when

partner service detection independent on DPI is used.
Instance
RNC
ZWF27-04-004
Cooperative Service Optimization
2-237
SJ-20141209142030-013|2015-11-12 (R1.3)
Cooperative Service Optimization FG
(0..65535)ms, step 20ms
Unit
ms
Default Value
1280
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the user-plane's
detection period for partner service detection independent of DPI.

Related factors: fluctuation of data stream and importance to report
the partner service in time.
If this parameter is set to a greater value, the impact of service
data traffic fluctuation on detection results is less, and detection
results are more accurate. However, the partner-based policy in
RNC is started later, and service experience may be affected. If
this parameter is set to a smaller value, the impact of service
data traffic fluctuation on the detection results is greater, and the
accuracy of detection results may be affected. When detection
results are accurate, the result could be reported in time and good
user experience is achieved.
N/A
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-238
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.166 The Required Minimum Total Data Number in Partner

Service Detection
Full Name
The Required Minimum Total Data Number in Partner Service

Detection
Abbreviated Name
partnerDataNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the total amount of data that should be

reached during one partner service detection period when partner
service detection independent of DPI is used. If the data amount
does not reach this threshold within one detection period, partner
service detection is not implemented.
Instance
RNC
ZWF27-04-004
1..65535
Unit
Byte
Default Value
100
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-239
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the threshold used to
determine whether to perform partner service detection.

Related factors: difficulty and accuracy of partner service detection.
If this parameter is set to a greater value, it is more difficult to
meet the determination conditions for partner service detection, so
timeliness of the partner-based policy is affected. However, the
amount of sampling data is increased, which ensures the detection
result accuracy of main-stream services.
If this parameter is set to a smaller value, it is easier to meet
the determination conditions for partner service detection, so the
partner-based policy can be started in time. However, the amount
of sampling data is reduced, which affects the detection result
accuracy of main-stream services.
The default value is set based on the difficulty and accuracy of
Reason
partner service detection.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.167 Partner Service Detection Pending Time

Full Name
Partner Service Detection Pending Time
Abbreviated Name
partnerPendTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum interval at which the user

plane reports the partner service to the control plane when partner
service detection independent of DPI is used.
2-240
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF27-04-004
(0..65535)ms, step 20ms
Unit
ms
Default Value
4000
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the minimum interval
at which the user plane reports the partner service to the control
plane.
Related factors: timeliness of partner service detection, and the
time that the service traffic used to be stable after the RRM QoS is
triggered by the change of the partner service.
If this parameter is set to a greater value, partner service detection
is performed at greater intervals, and the detection timeliness is
affected. However, service traffic during detection is more stable,
and the validity of detection results is improved. If this parameter
is set to a smaller value, partner service detection is performed
at smaller intervals, so detection is performed in time. However,
service traffic during detection may be not stable, and the validity
of detection results is affected.
The default value is set based on the timeliness of partner service
Reason
detection, and the time that the service traffic used to be stable after
the RRM QoS is triggered by the change of the partner service.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-241
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.1.168 Function Switch Used for Switching Off Pico/Micro NodeB

Intelligently
Full Name
Function Switch Used for Switching Off Pico/Micro NodeB

Intelligently
Abbreviated Name
pMCloseFunSwit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to support switching off the

Pico/Micro Node B intelligently.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: functional switch for switching off a pico/micro
Node B intelligently
Related factor: requirement on the power saving
2-242
SJ-20141209142030-013|2015-11-12 (R1.3)
It must be configured by a network planning and optimization
Reason
engineer according to the operator's power saving requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.169 Timer of Waiting for CS RB Setup Response over Uu

Interface when voice needs to be ciphered
Full Name
Timer of Waiting for CS RB Setup Response over Uu Interface when

voice needs to be ciphered
Abbreviated Name
waitVoiceRbCompT
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates Time of Waiting for CS RB Setup Response

over Uu Interface when voice needs to be ciphered.
Instance
RNC
N/A
N/A
Services and Radio Access Bearers FG
10..1000, step 1; Unit: 100ms
Unit
100ms
Default Value
26
Related Parameters
N/A
N/A
Parameters
2-243
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the time for the RNC
for waiting for the CS RB setup response over the Uu interface when
voice (including AMR, WAMR, and video call) needs to be ciphered.
Related factors: RAB setup success ratio and user experience
If the value is too small, the probability that the RNC receives
an RB Setup Complete message will be reduced and the service
connection setup success ratio will decrease.
If the value is too large, the probability that the RNC receives an RB
Setup Complete will be increased. However, if the RNC receives the
RB Setup Complete message too late (exceeding a CFN period),
the probability of inconsistency between UEs and RNCs TM RB
HFN value will be increased, leading to encipher and decipher error,
long noise in voice, and bad user experience.
This parameter is set according to RAB setup success ratio and
Reason
user experience.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.170 LTE Handover Support Sharing Switch

Full Name
LTE Handover Support Sharing Switch
Abbreviated Name
shareExLteSwch
Managed Object

3GPP Name
N/A
2-244
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates whether UMTS-to-LTE handovers are

restricted to selected PLMNs.
Instance
RNC
ZWF21-30-101
RAN Sharing with Dedicated Carrier
RAN Sharing FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether UMTS-to-LTE
handovers are restricted to selected PLMNs. It must be configured

according to the network plan of the operator.
Related factors: If network sharing is enabled and the restriction on
UMTS-to-LTE handovers is required, this parameter must be set to
On. Otherwise, this parameter must be set to Off.
The default value is set according to the network plan.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2-245
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.171 Switch for Load Balance of FACH

Full Name
Switch for Load Balance of FACH
Abbreviated Name
fachLBSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the FACH load balancing feature

is enabled on a global basis. If this switch is enabled in a multicarrier
network, and cells in the network have overlapping or inclusive
coverage, the FACH load can be balanced among these cells
according to the numbers of UEs in CELL_FACH state.
Instance
RNC
ZWF21-04-033
Load Balancing for CELL_FACH
ZTE UMTS FACH Load Balancing Feature Guide
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-246
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: RNC-level switch that enables or disables the
FACH load balancing feature in case of multicarrier network.

Related factors: resources used for bearing UEs in CELL_FACH
state and the numbers of CELL_FACH UEs in each cell.
If this switch is enabled, FACH load balancing based on the number
of CELL_FACH UEs is allowed among cells with overlapping
coverage. The FACH load balancing feature can prevent too many
CELL_FACH UEs in some cells while too few CELL_FACH UEs in
the other cells. However, the balancing procedure causes a delay
and increases the number of cell update messages in the target
cells.
The default value is set according to the actual network. By default,
Reason
this switch is disabled.
Change Take Effect
Ongoing Connection(at next state transition to FACH)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.1.172 The maximum number of inter-frequency neighboring cells

in network sharing
Full Name
The maximum number of inter-frequency neighboring cells in

network sharing
Abbreviated Name
shaNetMaxInterNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of inter-frequency

neighbor cells in case of network sharing.
Instance
RNC
2-247
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-30-100
RAN Sharing FG
Enumerated (32[0], 64[1])
Unit
N/A
Default Value
32
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: the maximum number of supported
inter-frequency neighbor cells in case of network sharing.

Related factors: network sharing.
If the parameter is set to 32, the network sharing supports 32
inter-frequency neighbor cells.
If the parameter is set to 64, the network sharing supports 64
inter-frequency neighbor cells.
The default value is set according to the application of network
Reason
sharing.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.1.173 The Switch of PS Load Control on RNC Level

Full Name
The Switch of PS Load Control on RNC Level

2-248
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
psLoadCtlSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether PS load control is enabled. This

RNC-level switch determines whether PS load control is performed.
If this switch is enabled, PS load control is performed.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: RNC-level PS load control switch.
Related factors: user experience on different services.

If user experience on CS services degrades due to heavy uplink or
downlink load in a cell, it is recommended to enable this switch to
improve user experience on CS services.
The default value is set to Off. This parameter is configured
Reason
according to the operator requirement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-249
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.1.174 Uplink Status Judgement Switch in HSPA Serving Cell

Change Procedure
Full Name
Uplink Status Judgement Switch in HSPA Serving Cell Change

Procedure
Abbreviated Name
hsSrvChgUlStaJud
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch that is used for controlling whether to

judge target' cell status in HSPA serving cell change procedure. If
the uplink is signed as "RL unrecoverable", the HSPA serving cell
will not change to this cell.
Instance
RNC
ZWF21-03-050
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-250
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: Uplink Status Judgement Switch in HSPA
Serving Cell Change Procedure

Related factors: Handover success rate
This parameter is a switch that is used for controlling whether to
judge target' cell status in HSPA serving cell change procedure. If
the uplink is signed as "RL unrecoverable", the HSPA serving cell
will not change to this cell.
Default value is set to "Off" and should be updated according to
Reason
the need of the operators.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.1.175 Global Reserved Parameter 1

Full Name
Global Reserved Parameter 1
Abbreviated Name
gResPara1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Golbal Reserved Parameter 1
Instance
RNC
N/A
N/A
0..255
Unit
N/A
2-251
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reserved parameter, default value equal 0
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
2-252
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
The reserved parameter is used to config "board user admission
control method" in this version. Value 0 is respond RRC

CONNECTION REJECT when user num exceed upper limit in valid
period; value 1 is discard RRC CONNECTION REQUEST
Default value equal 0
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara3
Managed Object

2-253
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter Function: This parameter indicates the HSUPA adaptive
transmission algorithm.
Configuration Rule: It needs to consider whether need to configure
HARQ power offset based on the E-DCH user number and
reconfigure HSUPA OLPC prameters when E-DCH user number
change.
If algorithm 1 is used (GResPara3 is 0), only HSUPA OLPC
parameters is adaptively changed according to the E-DCH
user number in the cell. But HSUPA OLPC parameters can be
reconfigured according to the E-DCH user number. The defect is
HARQ power offset can not be configured according to the E-DCH
user number.
If algorithm 2 is used (GResPara3 is not 0), HSUPA OLPC
parameters and HARQ power offset is configured according to
the E-DCH user number in the cell when service setup. But after
service setup, the HSUPA OLPC parameters and HARQ power
offset cannot be reconfigured.
Adjustment Suggestion: When HARQ power offset is need to be
configured according to the E-DCH user number like HSUPA OLPC
parameters, algorothm 2 can be used.
Reconfigure HSUPA OLPC prameters when E-DCH user number
Reason
change is priority.
2-254
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-255
SJ-20141209142030-013|2015-11-12 (R1.3)
The reserved parameter is used to config "BER target adjustment
switch" in this version.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-256
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
The reserved parameter is used to config "board user admission
control threshold" in this version. Value range is 0 to 65535
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
2-257
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
2-258
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara9
Managed Object

3GPP Name
N/A
2-259
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
2-260
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
gResPara10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-261
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
gResPara11
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-262
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
gResPara13
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
2-263
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
2-264
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
2-265
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara16
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
2-266
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara17
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
2-267
SJ-20141209142030-013|2015-11-12 (R1.3)
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara18
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
2-268
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara19
Managed Object
2-269
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..2^32-1
Unit
N/A
Default Value
V3: 30
V4: 250
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-270
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
gResPara20
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-271
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
GResPara41
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the switch that controls whether a UE receives an

Active Set Update message through the RLC ACK of the message.
0: The function is disabled.
1: The function is enabled.
The function means that in the Active Set Update procedure, if the
user plane receives the RLC ACK message of an Active Set Update
message, the RNC regards that the Active Set Update procedure
is successful after the waiting for an Active Set Update Complete
message times out.
Instance
RNC
ZWF21-03-050
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-272
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: the switch that controls whether a UE receives
an Active Set Update message through the RLC ACK of the

message.
0: This function is disabled.
1: This function is enabled.
Related factors: whether this function is required.
The default value is "0: Off". The parameter value should be set in
Reason
accordance with the operator's requirements.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gResPara42
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
1..16
Unit
N/A
Default Value
2-273
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
The reserved parameter is used to config "Max Number of Satellite
Info in measurement control message " in this version. Value range

is 1 to 16
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara43
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
2-274
SJ-20141209142030-013|2015-11-12 (R1.3)
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara45
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-275
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
Instance
RNC
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara46
2-276
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-277
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
gResPara49
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-278
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
gResPara50
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
2-279
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara51
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum reduced E-DPDCH gain

factor of a single-carrier UE or a DC-HSUPA UE on the primary
carrier. Mapping between the value of this parameter and Minimum
Reduced E-DPDCH Gain Factor is as follows:
0[8/15] 1[11/15], 2[15/15], 3[21/15], 4[30/15], 5[42/15],
6[60/15],(greater than or equal to) 7[84/15]</cf>0 to 8/15, 1 to
11/15, 2 to 15/15, 3 to 21/15, 4 to 30/15, 5 to 42/15, 6 to 60/15, and
(greater than or equal to) 7 to 84/15.
Instance
RNC
ZWF25-01-A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
2-280
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: minimum reduced E-DPDCH gain factor of a
single-carrier UE or a DC-HSUPA UE on the primary carrier

Related factors: rate of the HSUPA service and dropped-call rate
A larger parameter value indicates a higher power allocated to
E-DPDCH when the power of HSUPA UEs is restricted and higher
HSUPA data rate. However, if the parameter value is set too large,
the power of the control channel may be decreased and call drops
may occur in severe cases.
If the parameter is set too small, the power of the data channel may
be low when the power of HSUPA UEs is restricted, and thus the
data rate of the HSUPA service cannot be guaranteed.
The default value generally meets the data rate requirement.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.201 Global Reserved Parameter 52(bit9)

Full Name
Global Reserved Parameter 52(bit9)
Abbreviated Name
gRESPARA52
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Golbal Reserved Parameter 52.
Instance
RNC
2-281
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-001
Admission Control
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: controls whether the congestion cause is
considered in high priority blocking.

Related factors: ratio of successful RAB establishment.
The recommended value is "on". If parameter is set to "on", users
with lower priority can attempt to access the network even if users
with higher priority fail in CAC. This can increase the ratio of
successful RAB establishment.
Congestion causes are considered in high priority blocking to avoid
Reason
unnecessary high priority blocking and increase the service access

rate.
Change Take Effect
New connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

2-282
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
gResPara53
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum reduced E-DPDCH gain

factor of a DC-HSUPA UE on the secondary carrier. Mapping
between the value of this parameter and Minimum Reduced
E-DPDCH Gain Factor is as follows:
0 to 8/15, 1 to 11/15, 2 to 15/15, 3 to 21/15, 4 to 30/15, 5 to 42/15, 6
to 60/15, and (greater than or equal to) 7 to 84/15.
Instance
RNC
ZWF25-01-A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: minimum reduced E-DPDCH gain factor of a
DC-HSUPA UE on the secondary carrier

Related factors: rate of the HSUPA service and dropped-call rate
A larger parameter value indicates a higher power allocated to
E-DPDCH when the power of HSUPA UEs is restricted and higher
HSUPA data rate. However, if the parameter value is set too large,
the power of the control channel may be decreased and call drops
may occur in severe cases.
If the parameter is set too small, the power of the data channel may
be low when the power of HSUPA UEs is restricted, and thus the
data rate of the HSUPA service cannot be guaranteed.
2-283
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value generally meets the data rate requirement.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara54
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
2-284
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara55
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
2-285
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara57
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
2-286
SJ-20141209142030-013|2015-11-12 (R1.3)
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara58
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
2-287
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
gResPara59
Managed Object
2-288
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-289
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
gResPara60
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-290
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.1.209 The protocol version that network element uses

Full Name
The protocol version that network element uses
Abbreviated Name
ProVer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the protocol version used by the RNC.
Instance
RNC
N/A
N/A
Basic Id Parameter
10: R98
20: R99
30: R4
40: R5
50: R6
60: R7
70: R8
80: R9
Unit
N/A
Default Value
80: R9
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Unused parameter.
2-291
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.210 whether to Support Iur-g Signalling Procedure

Full Name
whether to Support Iur-g Signalling Procedure
Abbreviated Name
BscIurgSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a BSC supports an Iur-g signalling

procedure or not. If the BSC supports the Iur-g signalling procedure,
the SRNC executes ZTE-specific 3G-to-2G CS service handover
procedure through the Iur-g interface. During the optimized
procedure, the SRNC interacts with the BSC directly to allow the
BSC to reserve resources in advance. Then the SRNC initiates
Uu interface handover (from UTRAN) command and Iu interface
standard relocation-out procedure. This optimized procedure helps
decrease handover delay. During BSC resources reservation, the
BSC also returns NACC related data, cell capacity and load data in
the response message to the SRNC.
This parameter is used in multimode.
Instance
RNC
ZWF21-03-014
Enhanced Iur-g
Enhanced Iur-g FG
2-292
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Disable
1: Enable
Unit
N/A
Default Value
0: Disable
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch of BSC's support of an Iur-g signalling
procedure. (used in multimode)

Related factors: ZTE BSC interaction, and initiation of ZTE-specific
3G-to-2G CS service handover through the Iur-g interface.
If this parameter is set to "1", the SRNC executes ZTE-specific
3G-to-2G CS service handover procedure through the Iur-g
interface. During the optimized procedure, the SRNC interacts with
the BSC directly to allow the BSC to reserve resources in advance.
Then the SRNC initiates Uu interface handover (from UTRAN)
command and Iu interface standard relocation-out procedure. This
optimized procedure helps decrease handover delay. During BSC
resources reservation, the BSC also returns NACC related data, cell
capacity and load data in the response message to the SRNC.
If this parameter is set to "0" (Off), the function is disabled.
The default value is set to "0". This function can be enabled as
Reason
required.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-293
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.211 whether to Support PS Handover

Full Name
whether to Support PS Handover
Abbreviated Name
BscPsSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BSC supports PS inter-RAT

handover. 0No; 1Yes.
Instance
RNC
ZWF21-03-023
PS handover with GSM
PS handover with GSM FG
0: Disable
1: Enable
Unit
N/A
Default Value
0: Disable
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: PS inter-RAT handover capability (for
multimode systems)
Related factors: service continuity, user experience, GSM
equipment capability
If the parameter is set to "On", when a UE with PS service moves
to an inter-RAT adjacent cell, the PS service is handed over to the
inter-RAT cell, which ensures service continuity and improves user
experience.
If the parameter is set to "Off", the PS service will be interrupted
when the UE is handed over to GERAN via cell reselection
procedure.
2-294
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.212 whether to Support DTM Handover

Full Name
whether to Support DTM Handover
Abbreviated Name
BscDTMSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the BSC supports DTM (Dual

Transfer Mode), that is, whether the inter-RAT handover for both
CS domain services and PS domain services at the same time is
supported. 0No; 1Yes.
Instance
RNC
ZWF21-03-024
DTM Handover with GSM
DTM Handover with GSM FG
0: Disable
1: Enable
Unit
N/A
Default Value
0: Disable
Related Parameters
N/A
2-295
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: CS+PS inter-RAT handover capability (for
multimode systems)
Related factors: service continuity, user experience, GSM
equipment capability
If the parameter is set to "On", when a UE with CS and PS services
moves to an inter-RAT adjacent cell, the CS and PS services
are handed over to the inter-RAT cell at the same time via DTM
mechanism, which ensures service continuity and improves user
experience.
If the parameter is set to "Off", the PS service will be interrupted
when the UE is handed over to GERAN via cell reselection
procedure.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.1.213 Switch of IUPS Call Admission Control

Full Name
Switch of IUPS Call Admission Control
Abbreviated Name
IupsCacInd
Managed Object

2-296
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the IUPS call admission control switch.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
[0, 1]
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Set the switch as on when IUPS call admission control feature is
needed..
This parameter should be configured according to the actual
Reason
requirements of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

2-297
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
GResPara41
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the switch that controls whether a UE receives an

Active Set Update message through the RLC ACK of the message.
The function means that in the Active Set Update procedure, if the
user plane receives the RLC ACK message of an Active Set Update
message, the RNC regards that the Active Set Update procedure
is successful after the waiting for an Active Set Update Complete
message times out.
Instance
RNC
ZWF21-03-050
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: the switch that controls whether a UE receives
an Active Set Update message through the RLC ACK of the

message.
0: This function is disabled.
1: This function is enabled.
Related factors: whether this function is required.
Reason
2-298
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit0: controls whether UEs of Release 6 are allowed to be switched

to the URA_PCH/CELL_PCH status.
0: allowed, 1: not allowed.
Instance
RNC
ZWF21-04-004
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
2-299
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
Bit0: This parameter controls whether UEs of Release 6 are allowed
to be switched to the URA_PCH/CELL_PCH status.

The default value is set based on the assumption that there is no
Reason
incompatible UE of 3GPP release 6 on the PCH.
Change Take Effect
Ongoing connection (At state transition to PCH)
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit1: controls whether UEs of Release 7 are allowed to be switched

to the URA_PCH/CELL_PCH status.
Instance
RNC
ZWF21-04-004
0..255
Unit
N/A
2-300
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Bit1: This parameter controls whether UEs of Release 7 are allowed
to be switched to the URA_PCH/CELL_PCH status.

Reason
incompatible UE of 3GPP release 7 on the PCH.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit2: controls whether UEs of Release 8 and later releases are

allowed to be switched to the URA_PCH/CELL_PCH status.
2-301
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-04-004
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Bit2: This parameter controls whether UEs of Release 8 and later
releases are allowed to be switched to the URA_PCH/CELL_PCH

status.
Reason
incompatible UE of 3GPP release 8 and later releases on the PCH.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit3
2-302
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit3: the target RRC status of fast dormancy (R99/R4).

0: The URA_PCH/CELL_PCH is preferred. 1: The CELL_FACH is
preferred.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Bit3: the target RRC status of fast dormancy (R99/R4).

preferred.
Reason
incompatible UE of 3GPP release 99 or release 4 whose status is

transferred from the CELL_DCH to the PCH due to the triggering of
fast dormancy.
Change Take Effect
Ongoing connection (At state transition triggered by fast dormancy)
No
How to Impact
N/A
Access
read/write
OMC Access path
2-303
SJ-20141209142030-013|2015-11-12 (R1.3)
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit4: the target RRC status of fast dormancy (R5).

preferred.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Bit4: the target RRC state of fast dormancy (R5). 0: The
URA_PCH/CELL_PCH is preferred. 1: The CELL_FACH is

preferred.
Reason
incompatible UE of 3GPP release 5 whose status is transferred from

the CELL_DCH to the PCH due to the triggering of fast dormancy.
2-304
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit5: the target RRC status of fast dormancy (R6). 0: The

preferred.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
2-305
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No

preferred.
Reason

Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

preferred.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0..255
2-306
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

preferred.
Reason
incompatible UE of 3GPP release 7 whose status is transferred

from the CELL_DCH to the PCH.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA4bit7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-307
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

preferred.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

preferred.
Reason

Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added
2-308
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
GResPara12bit2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit2: controls whether to enable the Absolute Directed Retry

function.
0: off, which means the Absolute Directed Retry function is disabled.
1: on, which means the Absolute Directed Retry function is enabled.
Default: 0.
Instance
RNC
ZWF21-05-021
Directed Retry to GSM
Directed Retry to GSM FG
0..65535
Unit
N/A
Default Value
4096
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: Bit2 of this parameter controls whether to
enable the Absolute Directed Retry function.

Related factors: whether the Directed Retry function is enabled (this
function is only enabled in Cuba.)
0: off, which means that the Absolute Directed Retry function is
disabled.
1: on, which means that the Absolute Directed Retry function is
enabled.
By default, the function is disabled. Enable this function when it
is required.
2-309
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
GRESPARA12bit3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit3: controls whether the "Different HS-SCCH in consecutive TTIs"

support capability of Release 8 UEs is sent to the Node B.
0: off
1: on
Instance
RNC
ZWF23-01-A
HSDPA Introduction Package
HSDPA Introduction FG
0..65535
Unit
N/A
Default Value
4096 (bit12=1)
Related Parameters
N/A
N/A
Parameters
2-310
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
support capability of Release 8 UEs is sent to the Node B.

0: off
1: on
The default value is set based on the condition that the HS-SCCH
Reason
Less feature is disabled.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
GRESPARA12bit4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit4: controls whether the "HS-SCCH orders in HS-SCCH-less

operation" support capability of UEs of Release 8 and later releases
is sent to the Node B.
0: off
1: on
Instance
RNC
2-311
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF26-01-007
ZWF26-01-008
UL DTX
DL DRX
0..65535
Unit
N/A
Default Value
4096 (bit12=1)
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Bit4: controls whether the "HS-SCCH orders in HS-SCCH-less
operation" support capability of UEs of Release 8 and later releases

is sent to the Node B.
0: off
1: on
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name

2-312
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
GRESPARA12bit6
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

support capability of UEs of Release 9 and later releases is sent
to the Node B.
0: off
1: on
Instance
RNC
ZWF23-01-A
0..65535
Unit
N/A
Default Value
4096 (bit12=1)
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter controls whether the "Different HS-SCCH in
consecutive TTIs" support capability of UEs of Release 9 and later

releases is sent to the Node B.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
2-313
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
GResPara12bit15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit15: This parameter is the switch of determining a UE's capability

when UE's capability is not obtained.
0: off, which means that the UE does not support LTE.
1: If the "CSFB Information" IE is contained in the Relocation
Request message, the UE's capabilities are regarded as "Support of
E-UTRA FDD/TDD".
Default: 0.
Instance
RNC
ZWF21-03-111
Fast Return to LTE
0..65535
Unit
N/A
Default Value
4096
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-314
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter is the switch of determining a
UE's capability when UE's capability is not obtained.

Related factors: For a UE that is handed over from LTE to UTRAN
due to CSFB, if the function of fast return to LTE needs to be
performed for this UE even if the UE's capability is not obtained,
then the switch can be turned on.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
GResPara44bit2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit2: controls whether inter-band (changing the working frequency

band to U2100) inter-frequency balancing is allowed in the initial
RRC procedure.
0: off, which means inter-band balancing is not allowed.
1: on, Inter-band balancing to an inter-frequency adjacent cell that
belongs to the U2100 band is allowed.
Default: 0.
Instance
RNC
ZWF21-04-011
ZWF21-04-022
2-315
SJ-20141209142030-013|2015-11-12 (R1.3)
Load Balancing
Frequency Priority
Load Balance FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is used to control whether inter-band (changing the
working frequency band to U2100) inter-frequency balancing is

allowed in the initial RRC procedure.
Related factors: whether the function is enabled. The function is
disabled by default.
Because U2100 is a frequency band supported by default in UMTS,
it is recommended to enable this function, which allows inter-band
(changing the working frequency band to U2100) inter-frequency
balancing, and improves load and service distribution in the initial
RRC procedure.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added
2-316
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
GresPara44bit4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter control whether the PS suppression function is

enabled during CSFB.
0: off, which means that the PS suppression function is disabled.
1: on, which means that the PS suppression function is enabled.
Instance
RNC
ZWF21-03-101
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter controls whether to enable the
PS suppression function during CSFB.

Related factors: If the duration of CSFB requires to be shortened,
then this function can be enabled.
The default value is the normal choice.
Reason
Change Take Effect
New Connection
No
2-317
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
GresPara44bit7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit7: controls when the UE is in the CELL_FACH or CELL_PCH

status, if it initiates or receives a CS call, whether the SRB on the
DCH can use the high speed signaling before the CS RB setup
is completed.
0: off, 1: on.
Instance
RNC
ZWF21-05-026
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-318
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter controls when the UE is in the CELL_FACH or
CELL_PCH status, if it initiates or receives a CS call, whether the

SRB on the DCH can use the high speed signaling before the CS
RB setup is completed.
Related factors: CS call setup delay and success ratio and PS
service user experience.
If CS call KPIs are more important, turn on the switch. If PS service
user experience is more important, turn off the switch.
The default value is set based on the user experience with
Reason
throughput.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
Grespara47bit12
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If SSCOP link congestion occurs, processing new RRC requests

worsens the congestion. This parameter controls whether to process
RRC requests from the Node B after SSCOP link congestion occurs.
If this parameter is set to "0", the RNC does not accept RRC
requests. If this parameter is set to "1", the RNC accepts RRC
requests.
Instance
RNC
ZWF21-04-001
2-319
SJ-20141209142030-013|2015-11-12 (R1.3)
Admission Control
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter controls whether to continue
the procedure of processing RRC requests from the Node B when

SSCOP link congestion occurs.
Related factors: RRC success rate and system security.
If the parameter is set to 0, SSCOP link congestion will worsen, and
the RRC success rate will increase.
If the parameter is set to 1, SSCOP link congestion will be relieved,
and the RRC success rate will decrease.
If some Node Bs have seriously insufficient SSCOP link bandwidth,
set the parameter to 1. Otherwise, set the parameter to 0.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added
2-320
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
gRESPARA47bit14
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to control the mode of intra-frequency hard

handover.
0: timing re-initialized intra-frequency mode
1: timing-maintained intra-frequency mode
Instance
RNC
ZWF21-03-002
Intra-Frequency Hard Handover
Handover Control FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: controls the synchronization mode of
intra-frequency hard handover.

Related factor: This parameter is set in accordance with experience.
The default value is 0 (Timing re-initialized).
Reason
Change Take Effect
New Connection
No
2-321
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
Grespara47bit15
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit15: When a UE with RRC connected moves and the LAC/RAC is

changed, the RNC should notify the UE through an RRC message.
This parameter controls whether the RNC notifies UE or not when
the LAC/RAC is changed. If the parameter is set to "0", the RNC
does not notify the UE. If the parameter is set to "1", the RNC
notifies the UE.
Instance
RNC
ZWF21-03-001
ZWF21-03-003
ZWF21-03-002
Handover Control FG
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-322
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
notifies a UE when the LAC/RAC is changed.

Related factors: LAC/RAC notification and network load.
If the parameter is set to 0, the RRC-connected UE cannot know the
exact LAC/RAC, and the network load is low.
If the parameter is set to 1, the RRC-connected UE can know the
exact LAC/RAC, and the network load is high.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA48bit8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Bit8: a channel selection policy for switching a UE from the PCH

to another channel.
0: switching to the CELL_DCH is preferred; 1: switching to the
CELL_FACH is preferred.
2-323
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-04-004
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Network Planing&Optimization
Negotiation With CN
No
Function Switch
No
Parameter function: an indicator for the channel selection policy of
switching a UE from the PCH to another channel.

Related factors: user experience and resource utilization ratio.
If the Cell_DCH is preferred, user experience can be guaranteed,
but more resources are consumed. If the Cell_FACH is preferred,
user experience cannot be guaranteed, but fewer resources are
consumed.
Reason
throughput.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

2-324
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
gRESPARA52bit0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the value of bit0 is "0", R5 UEs are not allowed to be switched

to the PCH. If the value of bit0 is "1", R5 UEs are allowed to be
switched to the PCH.
Instance
RNC
ZWF21-04-004
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: controls whether R5 UEs are allowed to be
switched to the PCH.

Related factors: PCH compatibility of R5 UEs.
When the system supports the URA_PCH/CELL_PCH on, if R5 UEs
do not have the compatibility problem, it is recommended to allow
R5 UEs to be switched to the PCH.
The default value is set based on the assumption that there are
Reason
some incompatible UEs of 3GPP release 5 on the PCH.
Change Take Effect
No
How to Impact
N/A
2-325
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA52bit1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the value of bit1 is "0", the traffic volume measurement delivered

to a UE is released before the UE is switched to the PCH. If the
value of bit1 is "1", the traffic volume measurement delivered to a
UE is not released before the UE is switched to the PCH.
Instance
RNC
ZWF21-04-004
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-326
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: controls whether to release the traffic volume
measurement before the UE is switched to the PCH.

The recommended value is "0: Release the traffic volume
measurement before switching to PCH" for potential incompatible
UEs on the PCH.
The default value is set based on the assumption that there are
Reason
some incompatible UEs on the PCH.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
gRESPARA52bit9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Golbal Reserved Parameter 52.
Instance
RNC
ZWF21-04-001
Admission Control
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
2-327
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
WORD
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: controls whether the congestion cause is
considered in high priority blocking.

Related factors: ratio of successful RAB establishment.
The recommended value is "on". If parameter is set to "on", users
with lower priority can attempt to access the network even if users
with higher priority fail in CAC. This can increase the ratio of
successful RAB establishment.
Congestion causes are considered in high priority blocking to avoid
Reason
unnecessary high priority blocking and increase the service access

rate.
Change Take Effect
New connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added

Full Name
Abbreviated Name
GresPara56bit0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-328
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
Bit0: controls whether the HS-DSCH/E-DCH is prohibited for the PS

in a PS + CS simultaneous service. If it is set to "1", a UE supporting
the HS-DSCH/E-DCH is prohibited to use the HS-DSCH/E-DCH for
the PS setup or reconfiguration in a PS + CS simultaneous service.
0: off 1
1: on
Instance
RNC
ZWF21-05-026
0..2^32-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
DWORD
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a switch for prohibiting the PS
service carried on the HS-DSCH/E-DCH when there are concurrent

CS and PS services.
Related factors: user experience and call drop rate.
This parameter is introduced to solve the problems of the high
CS call drop rate when there are concurrent PS and CS services
carried on the HS-DSCH/E-DCH, and the poor user experience with
throughput when there are concurrent PS and CS services carried
on the DL DCH/UL DCH.
Reason
throughput.
Change Take Effect
Ongoing connection (At RB setup or reconfiguration for a CS+PS

simultaneous service)
No
How to Impact
N/A
2-329
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
V4.13.10.15/V3.13.10.15
Added
2.1.239 Son Transfer Response Switch between UMTS ans LTE

Full Name
Son Transfer Response Switch between UMTS ans LTE
Abbreviated Name
ulsonTransRespSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the response to LTE SON

Transfer requests.
If this switch is turned off, the RNC discards all received SON
Transfer request messages without response.
If this switch is turned on, the RNC sends a response message
Instance
RNC
ZWF21-03-026
0: False; 1: True
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-330
SJ-20141209142030-013|2015-11-12 (R1.3)
responds to SON Transfer request messages sent from the LTE.

Related factors: Whether this parameter is enabled or not depends
on whether the SON Transfer function is required in the network.
determine whether this function should be enabled.
The default value is set to "0: Off", which can be modified by the
Reason
operator as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
EC614004009989
2.1.240 The period of RNC starting the SON Transfer.

Full Name
The period of RNC starting the SON Transfer.
Abbreviated Name
sonTransReqPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time interval that the RNC uses the
SON Transfer function to query inter-RAT cell load information.
Instance
RNC
ZWF21-03-026
(0..65535) s, step: 1 s
Unit
2-331
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
300
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Because the load of a cell changes dynamically,
the RNC cannot query the cell load information in real time. The
RNC can only periodically query cell load information.
Related factors: Two factors must be considered: the load
information accuracy of inter-RAT neighbor cells, and load increase
due to a large number of messages caused by the SON Transfer
function. The two factors must be balanced.
If the value is too large, the inter-RAT neighbor cell load information
stored at the RNC may be inaccurate, which may cause an incorrect
handover decision.
If the value is too small, the load to be processed by the RNC boards
and the number of messages between the boards may increase,
may have a negative impact on the entire system.
The default value is set based on the maximum processing capacity
Reason
of hardware and the accuracy of load information about LTE

neighboring cells.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
EC614004009989
2.1.241 Son Transfer Request Number Threshold in one second

2-332
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Son Transfer Request Number Threshold in one second
Abbreviated Name
sonTransReqNumThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

per second that initiate a query of load information of inter-RAT cells.
Instance
RNC
ZWF21-03-026
(0..65535), step: 1
Unit
times
Default Value
20
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No

greatly. If the value is too small, the RNC cannot obtain the load
information of inter-RAT cells in a timely manner, which may affect
handover timeliness.
Reason
Change Take Effect
No
2-333
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
EC614004009989
2.1.242 Response the Son Transfer message Number Threshold

in one second
Full Name
Response the Son Transfer message Number Threshold in one

second
Abbreviated Name
sonTransRespNumThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

per second that are received from the inter-RAT for querying the
load information of RNC cells.
If the number of query request messages received from the
inter-RAT exceeds this threshold, the RNC discards the extra
messages.
Instance
RNC
ZWF21-03-026
(0..65535), step: 1
Unit
times
Default Value
20
Related Parameters
N/A
N/A
Parameters
2-334
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No

greatly. If the value is too small, the RNC cell load information
cannot be sent to inter-RAT cells in a timely manner, which may
affect handover timeliness.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
EC614004009989
2.1.243 Number of PSC to Reserve for Pico Cell

Full Name
Number of PSC to Reserve for Pico Cell
Abbreviated Name
reservedPscNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of PSCs that need to be

reserved.
2-335
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
Small Cell Package
0DBS_RR_MAX_NUM_PSC
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the number of PSCs
reserved for a PICO cell. The value 0 indicates that no PSC is

reserved, and the DBS_RR_MAX_NUM_PSC parameter is set to
50.
planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.1.244 Reserved PSC Number for Pico Cell

2-336
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Reserved PSC Number for Pico Cell
Abbreviated Name
reservedPsc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a reserved PSC number.
Instance
RNC
N/A
N/A
Small Cell Package
0..511
Unit
N/A
Default Value
N/A
Related Parameters
ReservedPscNum
The valid length of the array is determined by the ReservedPscNum
Parameters
parameter.
Data Type
WORD
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the reserved PSC
number.
planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-337
SJ-20141209142030-013|2015-11-12 (R1.3)
add
2.1.245 Adjust Period for CU Load Balance(Day)

Full Name
Adjust Period for CU Load Balance(Day)
Abbreviated Name
cuAdjustPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Traffic varies from one NodeB to another and the load on CUs is
different after a period of operation. Therefore, a NodeB needs to be
adjusted among CUs to balance the load on them. This parameter
indicates the period for NodeB adjustment.
Instance
RNC
N/A
N/A
N/A
0..1000
Unit
Day
Default Value
90
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
2-338
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter sets the period for Node B
adjustment between CUs.

Related factors: system stability and CU load difference.
The larger the value is, the less frequently Node B adjustment is
performed, the better the system stability is, and the larger the CU
load difference is. The smaller
the value is, the more frequently Node B adjustment is performed,
the worse the system stability is, and the smaller the CU load
difference is.
The default value is set based on the system stability and CU load
Reason
difference.
Change Take Effect
No
How to Impact
N/A
Access
N/A
OMC Access path
Add
2.1.246 High Load threshold for CU Load Balance

Full Name
High Load threshold for CU Load Balance
Abbreviated Name
cuAdjustHighThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
indicates the high load threshold of CUs. Once the load on CUs
exceeds this threshold, NodeB adjustment is made.
Instance
RNC
N/A
2-339
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
1..100
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the upper CU load
threshold, after which is reached will Node B adjustment be started.

Related factors: system stability and CU Load difference.
difference is.
Reason
difference.
Change Take Effect
No
How to Impact
N/A
Access
N/A
OMC Access path
Add
2.1.247 Begin Time to Adjust NodeB for CU Load Balance

2-340
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Begin Time to Adjust NodeB for CU Load Balance
Abbreviated Name
nbAdjustTime
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is an array with the elements of hour, minute, and

second. It indicates the start time to adjust a NodeB among CUs.
It is usually set to be a time point in the early morning when there
are a relatively small number of active UEs.
Instance
RNC
N/A
N/A
N/A
hour nbAdjustTime[0] (0..23), step: 1

min nbAdjustTime[1] (0..59), step: 1
sec nbAdjustTime[2] (0..59), step: 1
Unit
hour:min:sec
Default Value
[2 10 0] (The time is 2: 10: 00)
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the starting time of
Node B adjustment between CUs.

Related factors: system stability and traffic load.
This time is usually defined as the morning there are a relatively
small traffic load.
The default value is set based on the system stability and traffic load.
Reason
Change Take Effect
No
2-341
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
N/A
OMC Access path
Add
2.1.248 Difference Load Threshold for CU Load Balance

Full Name
Difference Load Threshold for CU Load Balance
Abbreviated Name
cuDiffLoadThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
indicates the allowed load difference threshold of CUs for NodeB
adjustment.
Instance
RNC
N/A
N/A
N/A
1..100
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-342
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the threshold of the
allowed maximum load difference between CUs when Node B

adjustment is performed.
Related factor: system stability and CU Load difference.
difference is.
Reason
difference.
Change Take Effect
No
How to Impact
N/A
Access
N/A
OMC Access path
Add
2.1.249 Switch for UE Differentiation QoS

Full Name
Switch for UE Differentiation QoS
Abbreviated Name
ueDiffSwtch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the UE differentiation QoS

function.
In the ZTE network, specific HSPA SPI values can be set for
different UE models.
Instance
RNC
ZWF21-05-030
2-343
SJ-20141209142030-013|2015-11-12 (R1.3)
UE based differentiated Qos
UE Based Differentiated QoS FG
0: Off
1: On
Unit
NA
Default Value
0:Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the UE
differentiation QoS function is enabled.

Related factors: whether to provide special HSPA SPI value for
specific model of UE.
Effects: In the ZTE network, specific HSPA SPI value can be set for
different UE model. This parameter controls whether the function
is enabled.
If the function is enabled, special HSPA SPI can be set for specific
model of UE.
If the function is disabled, special HSPA SPI cannot be set for
specific model of UE.
The default value is set because this function sets special HSPA
Reason
SPIs for specific UE models without differentiating UE priorities.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-344
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.250 E-DCH User Number Share Switch for Multi-PLMN in RNC

level
Full Name
E-DCH User Number Share Switch for Multi-PLMN in RNC level
Abbreviated Name
edchUeNumShareSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables E-DCH UE sharing for multiple

PLMNs at the RNC level.
If this parameter and UCelInfoFDD.edchUeNumShareSwch are
both set to "1: On", the minimum percentage of the number of
E-DCH UEs can be guaranteed for every PLMN in the cell.
Instance
RNC
ZWF21-30-105
Operator Specific HSUAP User Number for Shared Carrier
RAN Sharing FG
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is RNC-level switch for
E-DCH user sharing multiple PLMNs. If this parameter and

UCelInfoFDD.edchUeNumShareSwch are both set to "1: On", the
minimum E-DCH user number percent can be guaranteed for every
PLMN in the cell.
Related factor: network deployment requirements of the carrier.
Adjustment suggestion: This parameter is set according to the
requirements of the carrier.
2-345
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set because the function is not used in most
Reason
networks.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.1.251 The Switch to Ensure PS Service Admission in Emergency

Call CSFB Process via PS Handover
Full Name
The Switch to Ensure PS Service Admission in Emergency Call

CSFB Process via PS Handover
Abbreviated Name
csfbPSHOEmgCalSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the function that ensures PS

service admission in an emergency call CSFB process during a PS
handover. If this parameter is set to "1: On", a PS service can be
preferentially admitted in an emergency call CSFB process during a
PS handover.
Instance
RNC
ZWF21-03-101
0: Off
1: On
Unit
NA
2-346
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the switch that ensures PS
service admission in the Emergency Call CSFB process with PS

handover.
Related factors: emergency call user experience.
it is recommended that this function is enabled to improve
emergency call user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.252 The Switch of Emergency Call Identification and Admission

in Priority in SRVCC Process
Full Name
The Switch of Emergency Call Identification and Admission in

Priority in SRVCC Process
Abbreviated Name
sRVCCEmgCalSwch
Managed Object

3GPP Name
N/A
2-347
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter enables or disables emergency call identification and

admission by priority during an SRVCC process. If this parameter
is set to "1: On", the system identifies whether a CS call is an
emergency call or not. If the CS call is identified as an emergency
call, it is admitted as a service with the feature of emergency calls.
Instance
RNC
ZWF21-03-120
SR-VCC
SR-VCC FG
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets the switch of emergency
call identification and admission in priority in the SRVCC process.

Related factor: emergency call user experience.
it is recommended that this function is enabled to improve
emergency call user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-348
SJ-20141209142030-013|2015-11-12 (R1.3)
Add
2.1.253 Switch of Fast Dormancy Enhanced for Pre-R8

Full Name
Switch of Fast Dormancy Enhanced for Pre-R8
Abbreviated Name
preR8FdEnhSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables enhanced fast dormancy for

Pre-R8 UEs.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: Off
1: On
Unit
NA
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a function switch used to
set whether to enable the function of fast dormancy enhanced for

Pre-R8 or not.
Related factors: It is configured according to whether the operator
has purchased the license.
If the switch is enabled, a pre-R8 UE can be executed fast dormancy
after it sends an SCRI. It helps avoid signaling storm caused by
multiple setup request attempts.
2-349
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.254 The CIO Adjustment Switch for the Macro Small Cell Load
Balancing
Full Name
The CIO Adjustment Switch for the Macro Small Cell Load Balancing
Abbreviated Name
macroSmallCIOSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables CIO adjustment for a micro cell

during a macro-micro cell load balancing process.
Instance
RNC
ZWF21-03-001
Handover Control FG
0: Off
1: On
Unit
NA
Default Value
Off
Related Parameters
N/A
N/A
Parameters
2-350
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a switch used to set whether
to enable the adjustment of the CIO of a small cell during the

macro/small cell load balancing.
When the downlink load of the macro cell is high, a larger CIO
configured for a small cell helps shunt the small cell load.
When the load of the macro cell is low, a lower CIO configured for a
small cell helps avoid deteriorated downlink performance when the
small cell works as the serving link.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.255 The RoT Adjustment Switch for the Macro Small Cell Load
Balancing
Full Name
The RoT Adjustment Switch for the Macro Small Cell Load Balancing
Abbreviated Name
macroSmallRoTSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-351
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter enables or disables RoT adjustment for a micro cell

during a macro-micro cell load balancing process.
Instance
RNC
ZWF21-03-001
Handover Control FG
0: Off
1: On
Unit
NA
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a switch used to set whether
to adjust the RoT of a small cell during the macro/small cell load
balancing.
When the uplink load of the macro cell is high, a lower RoT is
configured for the small cell to avoid the decrease in the service
level in the macro cell due to too much interference on the macro cell
caused by the scheduling of a large amount of data in the small cell.
When the uplink load of the macro cell is low, a higher RoT is
configured for the small cell to make the small cell shunt more load
of the macro cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
2-352
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Add
2.1.256 Inter System Redirection with Consideration of Eutran Load

Support Indicator
Full Name
Inter System Redirection with Consideration of Eutran Load Support

Indicator
Abbreviated Name
ldBsdEutraRediInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to consider the load of the

target cell or not when the RNC determines E-UTRAN inter-RAT
redirection.
Instance
RNC
ZWF21-03-026
Inter-system Cell Load based Target Cell Choosing
0: Not Supported
1: Supported
Unit
NA
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-353
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether to consider
the cell load or not during the E-UTRAN inter-RAT redirection.

If the parameter is set to "1: Supported", the UMTS can acquire the
load condition in EUTRAN, and the inter-RAT redirection based on
EUTRAN load is considered to avoid access failure in EUTRAN
caused by overload in the EUTRAN system. However, UEs may
drop calls because they are forbidden to redirect to the EUTRAN
system.
If the parameter is set to "0: Not Supported", access to the EUTRAN
system may fail due to EUTRAN overload.
The default value is set based on user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.257 Whether Soft Handover Is Supported between Macro Cells

with Different Transport Time Delay Grades over Iub
Full Name
Whether Soft Handover Is Supported between Macro Cells with

Different Transport Time Delay Grades over Iub
Abbreviated Name
sHOforMIubTimeSpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-354
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether soft handovers can be executed

between the macro cells with different transport time delays (20 ms
and 100 ms) over the Iub interface.
If it is set to "1: Supported", soft handovers can be executed
between the macro cells with the transport time delays of 20 ms and
100 ms over the Iub interface. Otherwise, soft handovers are not
executed between these macro cells.
In this version, soft handovers over the Iur interface are not executed
between the macro cells with different transport time delays.
Instance
RNC
ZWF21-03-001
Handover Control FG
0: Not Supported;
1: Supported
Unit
NA
Default Value
0: Not Supported
Related Parameters
UIubLink.TimeDelay
The parameter UIubLink.TimeDelay is set to "20 ms" or "100 ms" for
Parameters
the reported cells and the cells in an active set.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Related factors: the service quality during the handover, the number
of soft handover over the Iur interface.

Configuration rule: If the feature is enabled, the macro cells in the
same RNC with different transport time delay of 20 ms and 100
ms over Iub can be added in one active set, and then the soft
handover can be performed to improve the service quality during
the handover. But the soft handover is not performed for cells with
different transport time delays under the DRNC, thus the number of
soft handovers over the Iur interface may decrease.
The default value is set because this function is used under license.
Reason
Change Take Effect
Ongoing Connection(at a new Incoming Measurement Report of

1A, 1C or 1D)
No
2-355
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.258 Whether Soft Handover Is Supported between a Macro

Cell and a Small cell, or between Small Cells with Different
Transport Time Delay Grades over Iub
Full Name
Whether Soft Handover Is Supported between a Macro Cell and a

Small cell, or between Small Cells with Different Transport Time
Delay Grades over Iub
Abbreviated Name
sHOforSIubTimeSpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether soft handovers can be executed

between a macro cell and a micro cell or between micro cells with
different transport time delays (20 ms and 100 ms) over the Iub
interface.
If it is set to "1: Supported", soft handovers can be executed
between a macro cell and a micro cell or between micro cells with
the transport time delays of 20 ms and 100 ms over the Iub interface.
Otherwise, soft handovers are not executed between these cells.
In this version, soft handovers over the Iur interface are not executed
between the cells with different transport time delays.
Instance
RNC
ZWF28-01-002
Macro/Small Cell Handover Optimization
Small Cell Package FG
0: Not Supported;
1: Supported
2-356
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
NA
Default Value
0: Not Supported
Related Parameters
UIubLink.TimeDelay
The parameter UIubLink.TimeDelay is set to "20 ms" or "100 ms" for
Parameters
the reported cells and the cells in an active set.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Related factors: the service quality during the handover, the number
of soft handover over the Iur interface.

Configuration rule: If the feature is enabled, the macro cells and
the micro cells, or the micro cells in the same RNC with different
transport time delay of 20 ms and 100 ms over Iub can be added
in one active set, and then the soft handover can be performed
to improve the service quality during the handover. But the soft
handover is not performed for cells with different transport time
delays under the DRNC, thus the number of soft handovers over
the Iur interface may decrease.
Reason
Change Take Effect
Ongoing Connection(at a new Incoming Measurement Report of

1A, 1C or 1D)
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.259 Switch of Iu Interface Interrupt Processing (Stop

Broadcasting PLMN(s) in MIB for Inaccessible Iu-CS or Set
Cell Barred)
2-357
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Switch of Iu Interface Interrupt Processing (Stop Broadcasting

PLMN(s) in MIB for Inaccessible Iu-CS or Set Cell Barred)
Abbreviated Name
iuIntrptProcSwh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the feature of Iu interface

interruption processing at the RNC level. With this feature enabled,
broadcasting of a PLMN with all the Iu-CS interfaces inaccessible
in MIB is stopped or the cells are configured with "Barred" if all the
Iu-CS interfaces of the PLMNs are inaccessible. The DSAR function
is not triggered for a PLMN not broadcast in MIB.
If an Iu-PS interface interruption for a PLMN occurs and if an Iu-CS
interface for the PLMN is accessible, whether PS DSAR for the
PLMN is triggered or not depends on the parameter settings of the
DSAR feature in the PS domain.
If this feature and the CS DSAR feature are both enabled, Iu-CS
interface interruption is handled with this feature instead of the CS
DSAR feature.
Instance
RNC
ZWF21-01-010
Iu Interface Interruption Protection
Iu Interface Interruption Protection FG
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-358
SJ-20141209142030-013|2015-11-12 (R1.3)
Related factors: the number of UEs supporting DSAR in the network.
Configuration rule: The DSAR feature must be supported by UEs.

If this feature is enabled, for a PLMN in which Iu-CS interfaces are
inaccessible, all UEs can identify the updated SIBs triggered by
Iu-CS interface interruption and then reselect another accessible
PLMN timely no matter whether DSAR is supported.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.260 RNC Switch of Load Triggered Handover from UMTS to LTE

Full Name
RNC Switch of Load Triggered Handover from UMTS to LTE
Abbreviated Name
loadTrgU2LRncSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RNC-level switch for load-triggered

handover from UMTS to LTE. When this parameter is set to "1: On"
and the cell load is high, the UEs that support LTE handover or
redirect to an LTE neighboring cell.
Instance
RNC
ZWF21-03-030
Load Based PS HO to LTE
2-359
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the RNC-level switch of
load-triggered handover from UMTS to LTE. It is used as the license.

Related factors: system capacity and user experience
If the function is enabled, when the cell load is high, PS service
handover or redirection to LTE will be triggered to reduce the UMTS
cell load and increase the system capacity, but the probability of
call drops caused by handover will increase, which may affect user
experience.
Adjustment suggestion: This function should be enabled when the
UMTS cell load is high and there are LTE neighbor cells.
The default value is set to reduce the impact on user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.261 Camping Strategy Switch for RNC

Full Name
Camping Strategy Switch for RNC

2-360
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
campStrgyRncSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to automatically adjust the

camping strategy of a cell or not. If the parameter is set to "1: On",
the camping strategy of a cell is changed from preferred camping
to random camping in heavy traffic scenario, and back to preferred
camping in light traffic scenario. If the parameter is set to "0: Off",
the camping strategy of a cell is not allowed to be automatically
adjusted.
Instance
RNC
ZWF21-01-011
Load Adaptive Camping strategy
Load Adaptive Camping strategy FG
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets the switch of whether to
automatically adjust the cell camping strategy.

Related factor: according to whether the operator has purchased
the license.
This parameter is a license parameter and the default value is set
Reason
based on the operator's requirements.
Change Take Effect
No
2-361
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.262 The Switch of Releasing RRC Connection in the Admission

Failure from Cell_FACH to Cell_DCH
Full Name
The Switch of Releasing RRC Connection in the Admission Failure

from Cell_FACH to Cell_DCH
Abbreviated Name
fACH2DCHRelRRCSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables RRC connection release

caused by admission failures during a transition from Cell_FACH to
Cell_DCH. If this parameter is set to "1: On", the RRC connection is
released after an admission failure in the Cell_DCH state.
Instance
RNC
ZWF21-04-010
Congestion Control
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
2-362
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the switch of releasing RRC
connection due to admission rejection when the UE state changes

from Cell_FACH to Cell_DCH.
Related factoruplink interference.
This function is suggested to be enabled to reduce uplink
interference.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.263 The Switch of InterRAT Energy Saving

Full Name
The Switch of InterRAT Energy Saving
Abbreviated Name
intRatEnergSavSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the switch for inter-RAT energy saving. If this

parameter is set to "1: GU Energy Saving" or "2: UL Energy
Saving" or "3: GUL Energy Saving", the inter-RAT carrier shutdown
algorithm is executed.
Instance
RNC
N/A
N/A
2-363
SJ-20141209142030-013|2015-11-12 (R1.3)
parameters for future
0: Off
1: GU Energy Saving
2: UL Energy Saving
3: GUL Energy Saving
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the switch of the inter-RAT
energy saving function.

Related factorpower saving requirement.
The function is suggested to be enabled to if it is required to save
energy.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.264 Son Transfer Response Switch between GERAN and UMTS

Full Name
Son Transfer Response Switch between GERAN and UMTS
Abbreviated Name
guSonTransRespSwch
2-364
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the SON Transfer procedure

between GERAN and UMTS.
If this parameter is set to "0: Off", the RNC discards all received
SON Transfer request messages and does not initiate a SON
Transfer procedure between GERAN and UMTS.
If this parameter is set to "1: On", the RNC sends a response
message when receiving a SON Transfer request message and
initiates a SON Transfer procedure between GERAN and UMTS.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter determines whether support
SON Transfer procedure between GERAN and UMTS.

whether the SON Transfer function is required in the networkeg
GUL energy saving function needs the switch turn on..
Adjustment suggestion: For GUL energy saving function switch is
off ,the default value of the switch is off .
The default is set to "False", which can be modified in accordance
Reason
Change Take Effect
New Connection
2-365
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
read/write
OMC Access path
EC614004009989
2.1.265 RNC Switch for Setting Power Ratio for Different PLMN
Full Name
RNC Switch for Setting Power Ratio for Different PLMN
Abbreviated Name
pwrRatioPlmnSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RNC-level switch for setting the power
ratio for multiple PLMNs during carrier sharing. If this parameter is
set to "1: On", the power ratio for multiple PLMNs must be satisfied
in the case of power congestion.
Instance
RNC
ZWF21-30-104
Operator Specific Power Resource for Shared Carrier
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
2-366
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets the RNC-level switch for
setting power ratios of different PLMNs in carrier sharing.

Related factors: operator requirements.
If the function is enabled, the power ratios of different PLMNs must
be guaranteed in power congestion.
If the function is disabled, the power ratios of different PLMNs does
not need to be guaranteed.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.266 Switch of acquiring SPID based on IMEI

Full Name
Switch of acquiring SPID based on IMEI
Abbreviated Name
spidImeiSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the SPID acquisition function

based on IMEIs. If the switch is set to "1: On", the RNC acquires
the SPID of a UE based on the UE's IMEI.
Instance
RNC
ZWF27-02-002
User Dedicated Frequency Priority

2-367
SJ-20141209142030-013|2015-11-12 (R1.3)
User Dedicated Frequency Priority FG

Idle Mode and Common Channel Behavior FG
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets whether to acquire SPID
based on IMEI.
Related factors: UE IMEI
When the dedicated priority function is enabled, if the RNC cannot
acquire the SPID of UE from the CN, this function can be enabled
to make the RNC acquire RNCSPID information according to the
UE IMEI.
The default value is set based on the operator's requirements.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.267 Switch of the Power Control Algorithm for HSPA Subscriber

in Macro-Micro Soft Handover Condition
2-368
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Switch of the Power Control Algorithm for HSPA Subscriber in

Macro-Micro Soft Handover Condition
Abbreviated Name
hsMicMacPcAlgSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RNC-level switch for the power control
algorithm for HSPA subscribers during macro-micro soft handover.
When an HSPA UE performs soft handover between macro and
micro cells, enabling of this function can avoid quality degradation of
the uplink control channel caused by coverage imbalance between
the uplink and downlink. The following two algorithms are used
only when this RNC-level switch is set to "1: On": uplink control
channel quality based OLPC for HSDPA UEs during macro-micro
soft handover and power offset updating of reference E-TFCI for
HSUPA UEs during macro-micro soft handover.
Instance
RNC
ZWF28-01-002
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-369
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter is the RNC-level switch of the
power control algorithm for HSPA subscribers in macro/small soft

handover.
Related factors: downlink service throughput of HSPA subscribers,
system capacity.
If this parameter is enabled, the problem of low HSDPA service
throughput due to bad HS-DPCCH/DPCCH quality in the serving
cell during macro/small soft handover can be resolved. But the
interference on the small cell will increase because the UE transmit
power increases.
If this parameter is disabled, the problem of low HSDPA service
throughput due to bad HS-DPCCH/DPCCH quality in the serving
cell during macro/small soft handover cannot be resolved. But
the interference on the small cell will not increase because the
UE transmit power does not increase, thus the system capacity
is guaranteed.
The default value is set based on the system capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add

Full Name
Switch for notify UE when LAC/RAC changed
Abbreviated Name
notifyUeRacChg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-370
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the RNC notifies a UE or not when

the UE in RRC Connected mode moves and the LAC/RAC changes.
Instance
RNC
N/A
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Whether the RNC notifies a UE or not when the
UE in RRC Connected mode moves and the LAC/RAC changes.

Related factors: timeliness of LAC/RAC perception and network load
If this parameter is set to "0: Off", RRC-connected UEs cannot
detect the exact LAC/RAC and the network load is low.
If this parameter is set to "1: On", RRC-connected UEs can detect
the exact LAC/RAC immediately and the network load is high.
Default value is set to "0:Off" and should be updated according to
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2-371
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.269 The Switch of High SRB Rate in CSFB Process via PS

Handover
Full Name
The Switch of High SRB Rate in CSFB Process via PS Handover
Abbreviated Name
csfbPSHoHighRateSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables high SRB rate control during a

CSFB-triggered PS handover. If this parameter is set to "1: On", the
high SRB rate is used in a CSFB process.
Instance
RNC
ZWF21-03-101
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for high SRB rate control during a
CSFB-triggered PS handover
Related factor: call delay
It is recommended to enable this function to enhance user
experience.
Reason
Change Take Effect
No
2-372
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.270 RNC Switch for MRO from LTE to UMTS Based on RIM
Full Name
RNC Switch for MRO from LTE to UMTS Based on RIM
Abbreviated Name
rIMBdL2UMRORncSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the function of "MRO from LTE

to UMTS Based on RIM". If both this parameter and the cell-level
parameter rIMBdL2UMROCelSw are set to "1: On" , the "MRO
from LTE to UMTS Based on RIM" function is enabled. In this
case, LTE measurement is initiated and measurement reports are
judged according to some criterions. The results of judgment are
fed back to LTE through a RIM process to optimize the parameters
in the LTE system. If this parameter or the cell-level parameter
rIMBdL2UMROCelSw is set to "0: Off", the "MRO from LTE to
UMTS Based on RIM" function is disabled.
Instance
RNC
N/A
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
2-373
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for the function of "MRO from LTE to
UMTS Based on RIM" at the RNC level

Related factor: network planning requirements
Adjustment suggestion: The parameter is set based on actual
network planning.
The default value is set based on actual network planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.1.271 56GResPara56
Full Name
56GResPara56
Abbreviated Name
GresPara56
Managed Object
URncFunction
3GPP Name
N/A
3GPP Reference
N/A
2-374
SJ-20141209142030-013|2015-11-12 (R1.3)

Description
Bit2: This parameter indicates whether an incoming handover

failure in the 2G system is a call drop when the RNC does not send
any relocation complete message after sending a relocation ACK
message.
0: No, 1: Yes.
Instance
RNC
NA
NA
NA
0..255
Unit
N/A
Default Value
0:00:00
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
NO
Function Switch
Yes
Bit2 function of the parameter: the switch of function that whether
the counter of call drop is counted when incoming inter-RAT

handovers aren't completed after RNC have sent the message of
Relocation ACK.
Parameter controlling factor: the function is on or off
Parameter setting suggestion: the function should be on the
demand of operator.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-375
SJ-20141209142030-013|2015-11-12 (R1.3)

V4.14.10.14
Modify

Full Name
Abbreviated Name
notifyUeRacChg
Managed Object
URncFunction
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets whether the RNC notifies a UE when the

LAC/RAC is changed because the UE in RRC Connected mode
moves.
Instance
RNC
ZWF21-03-001
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
No
2-376
SJ-20141209142030-013|2015-11-12 (R1.3)


Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.06
Add
2.1.273 Son Transfer Response Switch between UMTS and LTE

Full Name
Son Transfer Response Switch between UMTS and LTE
Abbreviated Name
ulsonTransRespSwch
Managed Object
URncFunction
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to response to LTE SON Transfer

requests.
If this switch is turned off, the RNC discards all received SON
Transfer request messages without any response.
If this switch is turned on, the RNC sends a response message
Instance
RNC
2-377
SJ-20141209142030-013|2015-11-12 (R1.3)

ZWF21-03-026
0: False; 1: True
Unit
N/A
Default Value
0:00:00
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
No
responds to SON Transfer request messages sent from the LTE.

Related factors: Whether this parameter is enabled or not depends
on whether the SON Transfer function is required in the network.
determine whether this function should be enabled.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.04
Add
2-378
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.274 The Switch for Attempting on CELL_FACH for the Second

Time for the Others category service during the RRC
Establishment Stage
Full Name
The Switch for Attempting on CELL_FACH for the Second Time for
the Others category service during the RRC Establishment Stage
Abbreviated Name
rrcOthersSndFachSw
Managed Object
UExtCelInfoFDD
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to attempt the second admission

in CELL_FACH for other services during the RRC establishment
stage. If the switch is set to '1: Second Admission on FACH is
Allowed', and if the RRC signaling of the PS service is denied
by the CELL_DCH, the second admission is conducted on the
CELL_FACH.
Instance
UTRAN Cell
ZWF21-01-012
Flexible RRC Control
Flexible RRC Control FG
0: Second Admission on FACH is not Allowed;

1: Second Admission on FACH is Allowed
Unit
Default Value
1: Second Admission on FACH is Allowed
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
No
2-379
SJ-20141209142030-013|2015-11-12 (R1.3)

Parameter function: This parameter is the switch for attempting
second-time admission in CELL_FACH for the Others service during

the RRC establishment stage. When the switch is set as '1: Second
Admission on FACH is Allowed', if the RRC signaling of the PS
service is denied by the CELL_DCH, it can be attempted again on
the CELL_FACH.
Related factors: the cell load and RRC establishment success ratio.
If the load is very high, the second-time admission function on
FACH can be disabled.
The default value is set because the load in a cell is generally
Reason
acceptable. For an overloaded cell, the default value should be

modified manually.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>UTRAN Cell->Extended Information 2 of UTRAN Cell
V4.14.10.14
Modify

Full Name
Abbreviated Name
notifyUeRacChg
Managed Object
URncFunction
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC notifies a UE when the

UE in RRC Connected mode moves and the LAC/RAC is changed.
Instance
RNC
ZWF21-03-001
2-380
SJ-20141209142030-013|2015-11-12 (R1.3)

Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.06
Add
2-381
SJ-20141209142030-013|2015-11-12 (R1.3)
2.1.276 GResPara56 (bit3)

Full Name
GResPara56
Abbreviated Name
gResPara56
Managed Object
URncFunction
3GPP Name
N/A
3GPP Reference
N/A
Description
bit3: This parameter indicates the configuration mode of

compressed mode parameters in the hard handover process,
including associated and dedicated modes.
0: associated mode;
1: dedicated mode.
The default value is 0.
Instance
RNC
ZWF21-03-010
Compressed Mode
0..255
Unit
N/A
Default Value
bit3: 0
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
RF
bit3
Parameter function: This parameter indicates the configuration

mode of compressed mode parameters in the hard handover
process, associated mode or dedicated mode.
Parameter controlling factor: performance impact.
Parameter setting suggestion: The associated mode is used
by default. But if the system performance is affected due to
configuring compressed mode parameters in associated mode, the
configuration mode is set to the dedicated mode.
2-382
SJ-20141209142030-013|2015-11-12 (R1.3)

The default value is consistent with the former strategy.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.14
Modify
2.1.277 GResPara56 (bit4)

Full Name
GResPara56
Abbreviated Name
gResPara56
Managed Object
URncFunction
3GPP Name
N/A
3GPP Reference
N/A
Description
bit4: This parameter indicates the configuration mode of

compressed mode parameters in the processes other than the
state transition (from common state to dedicated state) and hard
handover processes, including associated and dedicated modes.
Instance
RNC
ZWF21-03-010
Compressed Mode
0..255
Unit
N/A
Default Value
bit4: 0
Related Parameters
N/A
2-383
SJ-20141209142030-013|2015-11-12 (R1.3)

N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
RF
bit4
Parameter function: This parameter indicates the configuration

mode of compressed mode parameters in other processes other
than the state transition from common state to dedicated state and
hard handover processes, associated mode or dedicated mode.
Parameter controlling factor: performance impact.
Parameter setting suggestion: The associated mode is used
by default. But if the system performance is affected due to
configuring compressed mode parameters in associated mode, the
configuration mode is set to the dedicated mode.
The default value is consistent with the former strategy.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.14
Modify
2.2 Extended Info of RNC(URncInfo)

2.2.1 FACH CAC Tolerable Minimum Bit Rate
Full Name
FACH CAC Tolerable Minimum Bit Rate
Abbreviated Name
fachCacToMinRate
2-384
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
Extended Info of RNC(URncInfo)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum data rate threshold for new
traffic accessing the FACH. If the data rate of each service on the
FACH is lower than the parameter value due to FACH overload, new
traffic will be forbidden to access the FACH.
Instance
RNC
ZWF21-04-001
Admission Control
(100, 200, , 14400)bps, step 100bps
Unit
bps
Default Value
200bps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
If the average data rate of users in CELL_FACH state is lower than
this parameter due to congestion caused by too many users on the

FACH, new traffic will be forbidden to access the FACH.
The larger the parameter is, the fewer the users that can access the
FACH are. The smaller the parameter is, the lower the minimum
data rate that can be guaranteed is.
This parameter should be set based on the average data rate on the
FACH and number of users to be carried on the FACH.
The default parameter value is set based on the number of users
Reason
that are carried on the FACH.
Change Take Effect
No
2-385
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Extended Info of RNC
N/A
N/A
2.2.2 Extended Info of RNC Object ID

Full Name
Extended Info of RNC Object ID
Abbreviated Name
URncInfoId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the extended RNC

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-386
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2.2.3 The Switch of CQI Feedback Cycle and CQI Repetition Factor
Adjustment Based on Load
Full Name
The Switch of CQI Feedback Cycle and CQI Repetition Factor

Adjustment Based on Load
Abbreviated Name
cqiFeedbaLoadSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for adjusting the CQI feedback
cycle and CQI repetition factor based on the load. When this switch
is turned on, the CQI feedback cycle and CQI repetition factor
should be determined based on the uplink load and the HSDPA
subscriber quantity.
Instance
RNC
ZWF23-01-015
HSDPA CQI Adjustment
0: Off
1: On
Unit
N/A
2-387
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the switch for
adjusting the CQI feedback cycle and CQI repetition factor based
on the load.
Configuration rule: uplink capacity.
If this switch is turned on, the CQI feedback cycle and CQI repetition
factor should be determined based on the uplink load and the
HSDPA subscriber quantity, so that the uplink performance can be
improved.
If this switch is turned off, the CQI feedback cycle and CQI repetition
factor cannot be adjusted, which may affect the uplink capacity.
The default setting is based on the uplink service quality.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.4 Switch of the RRC Connection Access Strategy For Bad

Coverage
Full Name
Switch of the RRC Connection Access Strategy For Bad Coverage
Abbreviated Name
badCovRrcSwch
2-388
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of the RRC connection access

strategy for bad coverage.
If BadCovRrcSwch is "1: On", and if the poor coverage condition
that "the P-CPICH Ec/N0 UE reported is no more than BadCovEcN0
or the P-CPICH RSCP UE reported is no more than BadCovRscp "
is satisfied, RRC connection will be set up with DCH 3.4Kbps rate.
Otherwise, RRC connection will be set up in accordance with the
value of InitRrcOnDch.
Instance
RNC
ZWF21-04-014
0: Off
1: ON
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: controls the RRC access policy in case of poor
coverage.
If the switch is on, RRC connection is established on DCH at the rate
of 3.4 kbps for poor coverage, which improves the RRC connection
setup success ratio.
A new function which is set to off by default.
Reason
Change Take Effect
Ongoing Connection
No
2-389
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.5 AMR Initial Date Rate Decreasing in Bad Coverage Switch

Full Name
AMR Initial Date Rate Decreasing in Bad Coverage Switch
Abbreviated Name
amrBadCovSwh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to reduce the initial AMR access

rate in poor coverage areas.
Instance
UTRAN Cell
ZWF21-04-014
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
2-390
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates whether to reduce the initial AMR
access rate in poor coverage areas.

Related factors: call traffic volume and coverage of the cell.
In a cell where the call traffic volume is high and coverage is pool,
enabling this function is recommended.
The default value is set based on the call traffic volume and
Reason
coverage of the cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.6 Filling SAI Corresponding with CELL Consuming Radio

Resources Indicator
Full Name
Filling SAI Corresponding with CELL Consuming Radio Resources

Indicator
Abbreviated Name
initUEFiDAcSai
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates RNC supports filling SAI corresponding

to at least one of the cells from which the UE is consuming radio
resources.
Instance
RNC
ZWF21-01-004
NAS Message Transfer
2-391
SJ-20141209142030-013|2015-11-12 (R1.3)
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
supports filling SAI corresponding to at least one of the cells from

which the UE is consuming radio resources.
Related factors: It is a functional switch. If it is set to 1, the RNC
fills SAI corresponding to at least one of the cells from which the
UE is consuming radio resources. If it is set to 0, the RNC fills SAI
corresponding to the cells from which the UE sends RRC Complete.
Set it based on the carrier's requirement.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.7 E-DCH Throughput Measurement Event 4B Counter Threshold

for the HS-DSCH/E-DCH to HS-DSCH/DCH Switching
2-392
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
E-DCH Throughput Measurement Event 4B Counter Threshold for

the HS-DSCH/E-DCH to HS-DSCH/DCH Switching
Abbreviated Name
eToD4BtimesThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates E-DCH throughput measurement event

4B counter threshold for the HS-DSCH/E-DCH to HS-DSCH/DCH
Channel Switching. When the system receives consecutive
EToD4BtimesThr throughput measurement reports (event 4B) on
the E-DCH from the user plane, and event 6A is reported by UE, the
UE will be switched from HS-DSCH/E-DCH to HS-DSCH/DCH.
Instance
RNC
ZWF21-04-014
1..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the threshold of E-DCH throughput
measurement reports (event 4B) for triggering the switching from

HS-DSCH/E-DCH to HS-DSCH/DCH.
When the system receives a throughput measurement report (event
4B) for consecutive EToD4BtimesThr times on the E-DCH from the
user plane, and Event 6A is reported by the UE, the UE is switched
from HS-DSCH/E-DCH to HS-DSCH/DCH.
the channel switching from HS-DSCH/E-DCH to HS-DSCH/DCH.
If this parameter is set to a smaller value, it is easier to trigger the
channel switching from HS-DSCH/E-DCH to HS-DSCH/DCH.
2-393
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.8 The Switch for ARP based BLER Function

Full Name
The Switch for ARP based BLER Function
Abbreviated Name
blerArpSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for the BLER function based
on the subscriber's Allocation/Retention Priority (ARP). When the
switch is turned on, the service target BLERs of subscribers vary
with their ARPs (meaning that different power control parameters
are used).
Instance
RNC
ZWF21-04-013
Load Adaptive Power Control
Load Adaptive Power Control FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
2-394
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the switch for the
BLER function based on the subscriber's ARP.

Configuration rule:
If the switch is turned on, service target BLERs vary among
subscribers with different ARPs (meaning that different power
control parameters are used).
When the switch is turned off, power control parameters are
obtained without distinguishing ARPs.
Adjustment suggestion: set it as needed.
Set it as needed.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.9 Default ARP Segment

Full Name
Default ARP Segment
Abbreviated Name
defaultArpSeg
Managed Object

2-395
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the default Allocation/Retention Priority

(ARP) level. When the switch for the ARP-based BLER function is
turned off, power control parameters are obtained based on the
default ARP level. ARP levels are golden, silver, and bronze from
highest to lowest.
Instance
RNC
ZWF21-04-013
0: Golden;
1: Silver;
2: Bronze
Unit
N/A
Default Value
1: Silver
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter specifies the default ARP level.
When the switch for the ARP-based BLER function is turned off,
power control parameters are obtained based on the default ARP
level. From the highest to lowest priorities, ARP levels are golden,
silver, and bronze.
Configuration rule:
If this parameter is set to 0, it means that the power control
parameters corresponding to golden-priority subscribers are used
in the cell. The service quality is better, but the system capacity
is lower.
parameters corresponding to silver-priority subscribers are used
in the cell. Both of the service quality and system capacity are
considered.
parameters corresponding to bronze-priority subscribers are used
2-396
SJ-20141209142030-013|2015-11-12 (R1.3)
in the cell. The service quality is poorer, but the system capacity is
larger.
The default setting is based on the system capacity and the service
Reason
quality.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.10 ARP Threshold of Golden Subscriber Used in Power Control

Full Name
ARP Threshold of Golden Subscriber Used in Power Control
Abbreviated Name
arpGoldPc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Allocation/Retention Priority (ARP)

threshold for golden-level subscribers in the power control algorithm.
The ARP of golden-level subscribers is less than or equal to this
threshold.
Instance
RNC
ZWF21-04-013
1..15
Unit
N/A
Default Value
2-397
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
ArpBronzePc
ArpGoldPc <= ArpBronzePc
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the ARP threshold for
golden-priority subscribers in the power control algorithm. The ARP

of golden-priority subscribers is less than or equal to this threshold.
Configuration rule:
The smaller the setting is, the fewer subscribers are defined as
golden-priority subscribers. This means that fewer subscribers have
better service quality, and the system capacity is higher.
The larger the setting is, the more subscribers are defined as
golden-priority subscribers. This means that more subscribers have
better service quality, but the system capacity is lower.
This parameter is invalid if BlerArpSwitch is set to 0.
Reason
quality.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.11 ARP Threshold of Bronze Subscriber Used in Power Control

Full Name
ARP Threshold of Bronze Subscriber Used in Power Control
Abbreviated Name
arpBronzePc
Managed Object

2-398
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Allocation/Retention Priority (ARP)

threshold for bronze-level subscribers in the power control algorithm.
The ARP of bronze-level subscribers is larger than this threshold.
The ARP of silver-level subscribers is less than or equal to the
ARP threshold for bronze-level subscribers but larger than the ARP
threshold for golden-level subscribers.
Instance
RNC
ZWF21-04-013
1..15
Unit
N/A
Default Value
Related Parameters
ArpGoldPc
ArpGoldPc <= ArpBronzePc
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the ARP threshold
for bronze-priority subscribers in the power control algorithm. The

ARP of bronze-priority subscribers is larger than this threshold.
TheARP of silver-priority subscribers is less than or equal to the
ARP threshold for bronze-priority subscribers but larger than the
ARP threshold for golden-priority subscribers.
Configuration rule:
The smaller the setting is, the more subscribers are defined as
bronze-priority subscribers. This means that more subscribers have
poorer service quality, and the system capacity is higher.
The larger the setting is, the fewer subscribers are defined as
bronze-priority subscribers. This means that fewer subscribers have
poorer service quality, and the system capacity is lower.
This parameter is invalid when BlerArpSwitch is set to 0.
2-399
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
quality.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Load Filter Coefficient
Abbreviated Name
loadFilterCoeff
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the load filter coefficient, used in the

filtering of the uplink RoT and downlink effective load.
The calculation of filtering is as follows:
F (n) = (1-a) * F (n-1) + a * M (n)
Where:
F (n) is the updated filtered measurement result.
F (n-1) is the last filtered measurement result.
M (n) is the new load measurement result received.
a is the filter coefficient.
Instance
RNC
ZWF21-04-013
0..1, step 0.01
2-400
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
.5
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the load filter
coefficient, used in the filtering of the uplink RoT and downlink

effective load.
Configuration rule: The filtering results can be guaranteed and the
measurement results can be reflected in time.
The larger the setting, the greater effect on the load filter result
caused by the new load measurement result.
The smaller the setting, the less effect on the load filter result
The default setting is based on the actual application.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.13 User Number Filter Coefficient

Full Name
User Number Filter Coefficient
Abbreviated Name
userNumFilterCoeff
2-401
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the filter coefficient for the subscriber

quantity. It is used in the filtering of the equivalent uplink subscriber
quantity.
F (n) = (1-a) * F (n-1) + a * M (n)
Where:
F(n) is the updated filtered result.
F(n-1) is the last filtered result.
M (n) is the new equivalent uplink subscriber quantity.
Instance
RNC
ZWF23-01-015
ZWF21-04-013


0..1, step 0.01
Unit
N/A
Default Value
.5
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-402
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the filter coefficient for
the subscriber quantity. It is used in the filtering of the equivalent

uplink subscriber quantity.
The larger the setting, the greater effect on the filtering result of the
equivalent uplink subscriber quantity caused by the new equivalent
The smaller the setting, the less effect on the filtering result of the
equivalent uplink subscriber quantity caused by the new equivalent
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.14 Uplink Period BER Based OLPC Algorithm Switch

Full Name
Uplink Period BER Based OLPC Algorithm Switch
Abbreviated Name
olpcBerSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the periodic BER-based OLPC algorithm

switch. The algorithm is used in OLPC when no data or less data
is available.
Instance
RNC
2-403
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-016
Power Control Algorithm Enhancement
Power Control Algorithm Enhancement FG
0: Off;
1: On
Unit
N/A
Default Value
0: Off;
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the periodic
BER-based OLPC algorithm switch. The algorithm is used in OLPC

when no data or less data is available.
Related factors: service quality and the system capacity.
If the function is enabled, the SIR target can be decreased when no
data is available. This improves the system capacity but affects
the service quality.
The service quality is considered first in the default setting.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-404
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.15 SIR Target Increasing Shield Algorithm Switch

Full Name
SIR Target Increasing Shield Algorithm Switch
Abbreviated Name
shieldPeriodSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the SIR target increasing shield algorithm

switch. When this switch is turned on, if the total upward adjustment
quantity of the SIR target in a time window (outSirTimWinSize)
exceeds the threshold (outSirThresh), the SIR target cannot be
increased in the following shield period.
Instance
RNC
ZWF21-04-016
0: Off;
1: On
Unit
N/A
Default Value
0: Off;
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the SIR target
increasing shield algorithm switch.

The SIR target increasing shield algorithm is used to control the
speed of adjusting the SIR target to a larger value. This improves
the system capacity but affects the service quality.
Reason
2-405
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.16 BER Filter Coefficient

Full Name
BER Filter Coefficient
Abbreviated Name
berFilterCoeff
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER filter coefficient for physical

channels. It is used in BER filter of the OLPC based on the BERs
periodically reported. The filter formula is BER[n] = (1 - a) *
BER[n - 1] + a * BER (where, a is the filter coefficient, BER is the
measurement result, and BER[n] is the filter result).
Instance
RNC
ZWF21-04-016
(0..1), step 0.01
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-406
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the BER filter
coefficient for physical channels.

Related factors: BE fluctuation.
If the value is too large, the BER fluctuation is greater.
If the value is too small, the BER fluctuation cannot be reflected
in time.
The default setting should ensure that the BER change is reflected
Reason
and the BER fluctuation is reduced.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.17 Normal OLPC Algorithm Method

Full Name
Normal OLPC Algorithm Method
Abbreviated Name
olPcAlg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the algorithm of normal outer loop power

control to be used. There are two types of algorithm: BLER Target
Algorithm and Threshold Algorithm.
Instance
RNC
2-407
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-009
ZWF25-04-006
ZWF21-04-016
Power Control
Power Allocation for HSUPA
Power Control FG
0: BLER Target Algorithm

1: Threshold Algorithm
Unit
N/A
Default Value
1: Threshold Algorithm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter specifies the algorithm of
normal outer loop power control to be used. There are two types of
algorithm: BLER Target Algorithm and Threshold Algorithm.
Related factors: BLER target, SIR target adjustment speed, and
stability of SIR or BLER.
The BLER target algorithm makes the BLER approach to the BLER
target, and the SIR target adjustment is at high speed.
In the threshold algorithm, the SIR target adjustment is at slow
speed, but the SIR and BLER stability is good.
The threshold algorithm can satisfy the stability requirement of the
Reason
SIR and BLER.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-408
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.2.18 Switch of RXLEV-NECELL indication in oldBSS_ToNewBSS

Full Name
Switch of RXLEV-NECELL indication in oldBSS_ToNewBSS
Abbreviated Name
rxlevNecellInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch that determines whether to fill the

oldBSS_ToNewBSS information with the RXLEV-NECELL indication
during a 3G-to-2G handover.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
1: on
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-409
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether to fill
oldBSS_ToNewBSS with the RXLEV-NECELL indication during a

3G-to-2G handover.
on whether the GSM network supports the RXLEV-NECELL
information element.
The RXLEV-NECELL information element helps the GSM network
select an appropriate carrier.
The default is set to "On".
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.19 Maximum Times of DMP reselection

Full Name
Maximum Times of DMP reselection
Abbreviated Name
dmpReSelTimes
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When a UE accesses an RNC, the UE selects a DMP. If the selected

DMP fails to serve the UE, the UE needs to reselect a DMP. This
parameter indicates the maximum number of times that the UE
reselects a DMP.
Instance
RNC
N/A
N/A
2-410
SJ-20141209142030-013|2015-11-12 (R1.3)
Basic Parameter
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the maximum number of times that
the UE reselects a DMP.

Related factors: CPU LOAD of the DMP board and RRC
establishment success rate.
If this parameter is set to a greater value, the CPU LOAD of the DMP
board is heavier, and the RRC establishment success rate is higher.
If this parameter is set to a smaller value, the CPU LOAD of the DMP
board is lighter, and the RRC establishment success rate is lower.
The default value is set based on the "light CPU LOAD first" rule.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.20 The Adjustment Period for RoT Adjustment Dynamically

Full Name
The Adjustment Period for RoT Adjustment Dynamically
2-411
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
rotAdjstPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period for adjusting the RoT

dynamically. When the period is ended, the RNC determines
whether the RoT should be adjusted.
Instance
RNC
ZWF21-04-015
Dynamic RoT Control
0..255
Unit
Default Value
30s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the period for
adjusting the RoT dynamically.

Related factor: HSUPA throughput and the coverage of the uplink
cell.
The larger the RoT, the larger the uplink interference and the larger
E-DCH throughput of the cell. The smaller the RoT, the smaller the
uplink interference and the smaller E-DCH throughput of the cell.
The default setting is based on the HSUPA throughput and the
Reason
coverage of the cell uplink.
Change Take Effect
Ongoing Connection(at next adjustment period)
No
How to Impact
N/A
2-412
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.2.21 Decrease Step for RoT Adjustment Dynamically

Full Name
Decrease Step for RoT Adjustment Dynamically
Abbreviated Name
rotDcrsStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for adjusting the RoT dynamically
to a smaller value.
Instance
RNC
ZWF21-04-015
Dynamic RoT Control
(0.. 10)dB, step 0.1dB
Unit
dB
Default Value
0.5dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-413
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the step for adjusting
the RoT dynamically to a smaller value.

Related factor: granularity for adjusting the RoT.
The larger the setting, the larger granularity for adjusting the RoT to
a smaller value. This may cause a smaller E-DCH throughput. The
smaller the setting, the smaller granularity for adjusting the RoT to a
smaller value. This may not improve the coverage obviously.
The default setting is based on the granularity of decreasing the RoT.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.22 Increase Step RoT Adjustment Dynamically

Full Name
Increase Step RoT Adjustment Dynamically
Abbreviated Name
rotIncrsStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for adjusting the RoT dynamically
to a larger value.
Instance
RNC
ZWF21-04-015
Dynamic RoT Control
(0.. 10)dB, step 0.1dB

2-414
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
0.3dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the step for adjusting
the RoT dynamically to a larger value.

Related factor: granularity for adjusting the RoT.
The larger the setting, the larger granularity for adjusting the RoT
to a larger value. This may cause limited coverage. The smaller
the setting, the smaller granularity for adjusting the RoT to a larger
value. This may not improve the E-DCH throughput obviously.
The default setting is based on the granularity of increasing the RoT.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.23 HSUPA Rate Threshold for RoT Adjustment Dynamically

Full Name
HSUPA Rate Threshold for RoT Adjustment Dynamically
Abbreviated Name
hsupaRteThdforRot
Managed Object

2-415
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the HSUPA rate threshold for the RoT
dynamic adjustment.
Instance
RNC
ZWF21-04-015
Dynamic RoT Control
0..65535
Unit
kbps
Default Value
32 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the HSUPA rate
threshold for the RoT dynamic adjustment.

Related factors: HSUPA services that report event 6A and operate
at a lower speed are considered as interferences.
The larger the setting, the more easily HSUPA services are
considered as interferences. The smaller the setting, the less easily
HSUPA services are considered as interferences.
The default setting is based on the difficulty at which HSUPA
Reason
services are considered as interferences.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-416
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.2.24 The Trigger Time of HSUPA in Low Rate State for RoT
Adjustment Dynamically
Full Name
The Trigger Time of HSUPA in Low Rate State for RoT Adjustment
Dynamically
Abbreviated Name
rotLwRatTrigTim
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the triggering time of the HSUPA in low

rate state for the RoT dynamic adjustment.
Instance
RNC
ZWF21-04-015
Dynamic RoT Control
0..255
Unit
Default Value
10s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-417
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the triggering time of
the HSUPA in low rate state for the RoT dynamic adjustment.
Related Factor: rate fluctuation of HSUPA users.
The larger the setting, the less easily the RoT judgment is influenced
by rate fluctuation of HSUPA users (but the rate change is less
sensitive). The smaller the setting, the more easily the RoT
judgment is influenced by rate fluctuation of HSUPA users (but the
rate change is more sensitive).
The default setting is based on the rate fluctuation of HSUPA users.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.25 Time of Arrival Window Endpoint for Enhanced PCH

transmission channel
Full Name
Time of Arrival Window Endpoint for Enhanced PCH transmission

channel
Abbreviated Name
epchToAWE
Managed Object

3GPP Name
ToAWE
3GPP Reference
TS 25.433
2-418
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

This parameter controls the latest time when the PCCH data (such
as paging data) on the enhanced CELL_FACH arrives at the
receiving window of the Node B.
Instance
RNC
N/A
N/A
parameter for future use
(0..2559)ms, step 1ms
Unit
ms
Default Value
8ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: The parameter is configured according to the
capability of the NodeB processing the PCCH data on the enhanced

CELL_FACH.
If the setting is too small, the NodeB cannot process the PCCH
data on the enhanced CELL_FACH in time, and the probability that
the PCCH data on the enhanced CELL_FACH is successfully sent
over the Uu interface decreases.
If the setting is too large, downlink PCCH data is stored in the
RNC/NodeB for a longer time and the time delay for transporting the
PCCH data (such as paging type1) on the enhanced CELL_FACH
increases.
The default setting is based on the Node B's capability to process
Reason
the enhanced PCH data frames.
Change Take Effect
Yes
2-419
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.26 Time of Arrival Window Startpoint for Enhanced PCH

transmission channel
Full Name
Time of Arrival Window Startpoint for Enhanced PCH transmission

channel
Abbreviated Name
epchToAWS
Managed Object

3GPP Name
ToAWS
3GPP Reference
TS 25.433
Description

endpoint. A data frame arriving before TOAWS gives a TIMING
This parameter and the vsDataUIubLink.timeDelayJitter parameter
jointly determine the earliest time when the PCCH data (such as
paging data) on the enhanced CELL_FACH arrives at the receiving
window of the Node B.
Instance
RNC
N/A
N/A
(0..1279)ms, step 1ms
Unit
ms
Default Value
44ms
Related Parameters
N/A
2-420
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter and the vsDataUIubLink.timeDelayJitter parameter
Parameters
jointly determine the earliest time when the PCCH data (such as
paging data) on the enhanced CELL_FACH arrives at the receiving
window of the Node B.
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: The parameter is configured according to the
capability of the RNC/NODEB processing the PCCH data on the

enhanced CELL_FACH.
If the setting is too small, the RNC cannot send the PCCH data
on the enhanced CELL_FACH in time, and the probability that the
PCCH data (such as paging type1) on the enhanced CELL_FACH is
successfully sent over the Uu interface decreases.
If the setting is too large, downlink PCCH data is stored in the
RNC/NodeB for a longer time and the time delay for transporting the
PCCH data (such as paging type1) on the enhanced CELL_FACH
increases.
The default setting is based on the RNC/NodeB's capability to
Reason
process the enhanced PCH data frames.
Change Take Effect
Yes
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.27 Switch for Improving EUL Power at UE Power Limitation

in RNC
Full Name
Switch for Improving EUL Power at UE Power Limitation in RNC
2-421
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
rncImpEulPwrSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC improves the EUL power
when the UE power is restricted.
Instance
RNC
ZWF25-01-A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
improves the EUL power when the UE power is restricted.

Related factor: whether the RNC and neighboring RNCs support
improving the EUL power when the UE power is restricted.
This parameter is set to "1: On" only if the RNC and neighboring
RNCs support improving the EUL power when the UE power is
restricted.
The default setting is "0: Off". It can also be set to "1: On" based on
Reason
whether the RNC has the capability.
Change Take Effect
No
How to Impact
N/A
2-422
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.2.28 R5 and above UE RRC release mode

Full Name
R5 and above UE RRC release mode
Abbreviated Name
r5PchRrcRelMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RRC release mode of UEs of R5 or

later versions in PCH state.
Instance
RNC
ZWF21-01-002
0: RRC release
1: direct paging release
Unit
N/A
Default Value
0: RRC release
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-423
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter indicates the RRC release mode of UEs of R5 or
later versions in PCH state.

Related factor: compatibility of UEs that support R5 or later versions.
The value 0 indicates using the RRC release procedure. The RNC
sends PT1 to the PCH UE. After the UE enters a non-PCH state,
the RNC sends an RRC Release message to the UE.
The value 1 indicates using the direct paging release procedure.
The RNC sends a PT1 message including the Paging Release
Indicator IE to a UE. The UE can release the RRC directly. This
function is introduced in R5. For UEs that do not support R5, the
system may crash or a call may be dropped.
The default value is set based on UEs on the existing network.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.29 Switch of Forbidding AMR Deceleration Triggered by

Congestion Control
Full Name
Switch of Forbidding AMR Deceleration Triggered by Congestion

Control
Abbreviated Name
conForbAmrSwit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-424
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether to forbid AMR deceleration

triggered by congestion control. If this parameter is set to
"forbidden", AMR is not decelerated when congestion control
outputs a deceleration command.
Instance
RNC
ZWF21-04-010
ZWF25-01-033
Congestion Control
Adaptive HSUPA TTI
Adaptive HSUPA TTI FG
0: not forbidden
1: forbidden
Unit
N/A
Default Value
0: not forbidden
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether to forbid AMR deceleration
triggered by congestion control.

Related factors: user experience and system capacity.
If the parameter is set to "not forbidden", AMR deceleration can
be triggered by congestion control, and the user experience may
be affected.
If the parameter is set to "forbidden", AMR deceleration cannot be
triggered by congestion control. As a result, soft resources may not
be released, and the system capacity may be affected.
The default value ("not forbidden") is set based on the system
Reason
capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
2-425
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.2.30 Switch of Forbidding AMR Deceleration Triggered by

Overload Control
Full Name
Switch of Forbidding AMR Deceleration Triggered by Overload

Control
Abbreviated Name
loadForAmrSwit
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to forbid AMR deceleration

triggered by overload control. If this parameter is set to "forbidden",
AMR is not decelerated when overload control outputs a
deceleration command.
Instance
RNC
ZWF21-04-002
Overload Control
Overload Control FG
0: not forbidden
1: forbidden
Unit
N/A
Default Value
0: not forbidden
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-426
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: indicates whether to forbid AMR deceleration
triggered by overload control.

Related factors: user experience and system capacity.
If the parameter is set to "not forbidden", AMR deceleration can
be triggered by overload control, and the user experience may be
affected.
If the parameter is set to "forbidden", AMR deceleration cannot be
triggered by overload control. As a result, soft resources may not be
released, and the system capacity may be affected.
The default value ("not forbidden") is set based on the system
Reason
capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.31 Switch for Whether the PS DRBC based on Traffic Volume is

Prohibited for CS+PS Scene
Full Name
Switch for Whether the PS DRBC based on Traffic Volume is

Abbreviated Name
psDrbcProhSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether PS DRBC based on traffic volume

is forbidden for the CS+PS scenario.
Instance
RNC
2-427
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-05-026
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether PS DRBC based on traffic
volume is forbidden for the CS+PS scenario.

Related factors: user experience, resource utilization and
dropped-call rate.
If the parameter is set to "1: On", for the CS+PS scenario, PS DRBC
based on traffic volume is forbidden. This reduces the number of
times that information is reconfigured, and the dropped-call rate
of the CS service is reduced. However, DRBS for the PS service
is forbidden, so the resource utilization may be low and the user
experience may be poor.
The default value is set based on the user experience and resource
Reason
utilization.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-428
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.32 Valid Time Threshold for PS DRBC based on Traffic Volume

is Prohibited for CS+PS Scene
Full Name
Valid Time Threshold for PS DRBC based on Traffic Volume is

Abbreviated Name
psDrbcProhTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the valid time in which PS DRBC based on

traffic volume is forbidden for the CS+PS scenario.
Instance
RNC
ZWF21-05-026
1..65535
Unit
Default Value
90
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the valid time in which PS DRBC
based on traffic volume is forbidden for the CS+PS scenario.

Related factors: user experience, resource utilization and
dropped-call rate.
If this parameter is set to a greater value, for the CS+PS scenario,
the time in which PS DRBC based on traffic volume is forbidden
is longer. This reduces the number of times that information is
reconfigured, and the dropped-call rate of the CS service is reduced.
However, DRBS for the PS service is forbidden, so the resource
utilization may be low and the user experience may be poor.
2-429
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on the dropped-call rate.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.33 Time of Waiting for Measure Report from MicroNodeb

Full Name
Time of Waiting for Measure Report from MicroNodeb
Abbreviated Name
tWaitMNMeasRpt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for waiting for a measurement

report from a micro base station after the RNC sends a Measure
Control message to the micro base station.
Instance
RNC
N/A
N/A
1..60 setp: 1
Unit
min
Default Value
2(min)
Related Parameters
N/A
N/A
Parameters
2-430
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the timer for waiting for a
measurement report from a micro base station after the RNC sends
a Measure Control message to the micro base station.
Related factor: time cost that the micro base station used for sniffer
measurement.
If the value of the parameter is too small, the micro base station
may not finish private measurement. As a result, the RNC cannot
receive the measurement report from the micro base station, and
the cell cannot be established.
If the value of the parameter is too great, the time used for establish
the cell may be too long.
The default value is set based on the time that the micro base
Reason
station uses to finish sniffer measurement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.34 AMR Rate Control Switch after Relocation

Full Name
AMR Rate Control Switch after Relocation
Abbreviated Name
intraRlocAmrRtCtrl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-431
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether narrowband or broadband AMR

service rate changes are allowed after incoming-office relocation in
the system. The value 0 indicates that narrowband or broadband
AMR service rate changes are allowed. The value 1 indicates that
narrowband or broadband AMR service rate changes are disallowed.
Instance
RNC
ZWF21-04-005

0: AMR Rate Changing is Allowed after Relocation

1: AMR Rate Changing is Not Allowed after Relocation
Unit
N/A
Default Value
0: AMR Rate Changing is Allowed after Relocation
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether narrowband or broadband
AMR service rate changes are allowed after incoming-office

relocation in the system. The value 0 indicates that narrowband or
broadband AMR service rate changes are allowed. The value 1
indicates that narrowband or broadband AMR service rate changes
are disallowed.
Related factor: UE compatibility. If rate changes result in no voice
during calls on some UEs after relocation, the value should be set to
disallow narrowband or broadband AMR service rate changes.
The default value should be set not to change the original system
Reason
policy, indicating that narrowband or broadband AMR service rate

changes are allowed.
Change Take Effect
New Connection
No
How to Impact
N/A
2-432
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.2.35 The number of CMP for handling paging

Full Name
The number of CMP for handling paging
Abbreviated Name
cmpNumforPaging
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of CMP modules that process

PAGING messages from IU or IUR interfaces. The value "1"
indicates that PAGING messages are processed by the local board,
meaning that the CMP module located on the transmission link that
receives PAGING messages.
Instance
RNC
ZWF21-01-003
Paging
1..128
Unit
N/A
Default Value
V3: 4
V4: 1
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-433
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates the number of CMP modules that
process PAGING messages.

Related factors: number of PAGING messages from the IU interface
and user-plane CPU load.
The value "1" indicates that PAGING messages are processed
by the local board, meaning that the CMP module located on the
transmission link that receives PAGING messages.
If this parameter is set to a greater value, the number of PAGING
messages from the IU interface processed by the RNC is greater,
and the user-plane CPU load is heavier.
If this parameter is set to a smaller value, the number of PAGING
messages from the IU interface processed by the RNC is smaller,
and the user-plane CPU load is lighter.
The default value is set based on the network paging capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.36 E-DCH MAC-d Flow Multiplexing List Switch

Full Name
E-DCH MAC-d Flow Multiplexing List Switch
Abbreviated Name
edchMACdmulti
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for the E-DCH MAC-d Flow
multiplexing list.
2-434
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF25-01-A
0: All bits are set 0;

1: All bits are set 1;
2: Take the value set by algorithm
Unit
N/A
Default Value
1: All bits are set 1
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates the switch for the E-DCH MAC-d Flow
multiplexing list.
Related factors: CE resources and system throughput.
If the parameter is set to "0", MAC-D flows are not multiplexed, and
the CE resource utilization is low. However, even if resources for
services are sufficient, only one MAC-D flow can be sent within each
TTI. The throughput is reduced.
If the parameter is set to "1", MAC-D flows are multiplexed, and the
CE resource utilization is high. Multiple MAC-D flows can be sent
within each TTI. The throughput is improved.
If the parameter is set to "2", the multiplexing list is determined
through an algorithm, and the throughput is between the above
throughputs.
CE resources are not the bottleneck in actual scenarios.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-435
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.2.37 EDCH Fallback Switch for Soft Handover CAC Failure

Full Name
EDCH Fallback Switch for Soft Handover CAC Failure
Abbreviated Name
e2DSHOSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether or not another soft handover

is executed after a 2 ms E-DCH fallback to 10 ms E-DCH or an
E-DCH fallback to DCH in the case of E-DCH soft handover CAC
failures during a soft handover
Instance
RNC
ZWF25-01-A
CS over HSPA FG
DC-HSUPA FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-436
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter determines whether or not
another soft handover is executed after a 2 ms E-DCH fallback to 10

ms E-DCH or an E-DCH fallback to DCH in the case of E-DCH soft
handover CAC failures during a soft handover.
Related factor: success rate of handover
Configuration rule: If the EDCH soft handover admission fails:
If this parameter is set to "1: On", another soft handover is executed
after a 2 ms E-DCH fallback to 10 ms E-DCH or an E-DCH fallback
to DCH.
If this parameter is set to "0: Off", a hard handover is executed.
The default value is set based on handover successful rate.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.38 Switch of Reconfiguration Procedure Optimization

Full Name
Switch of Reconfiguration Procedure Optimization
Abbreviated Name
syncRecfgSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-437
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the RNC optimizes the

synchronization reconfiguration procedure.
In the synchronization reconfiguration procedure, the RNC notifies
the network to perform the handover after it confirms that the UE
receives the downlink air interface configuration message (the RNC
receives the RLC ACK message of the air interface configuration
message through the user plane from the UE). This means that
the RNC delays sending the RadioLinkReconfigurationCommit
message until it receives the uplink RLC Ack message from the UE.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether to enable optimization for the
synchronization reconfiguration procedure.

Related factors: downlink and uplink data resending rates on the
Uu interface.
If downlink data resending rate on the Uu interface is higher than
the uplink resending rate, after this function is enabled, the success
rate of the reconfiguration procedure increases.
If uplink data resending rate on the Uu interface is higher than the
downlink resending rate, after this function is enabled, the success
rate of the reconfiguration procedure decreases.
By default, this parameter is set to "0: Off". This parameter can
Reason
be set to "1: On" if necessary.
Change Take Effect
New Connection
No
2-438
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.39 Switch of Reconfiguration Procedure Optimization with

Macro Diversity
Full Name
Switch of Reconfiguration Procedure Optimization with Macro

Diversity
Abbreviated Name
recfgOptMacroDiv
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable optimization for the

macro diversity synchronization reconfiguration procedure in the
RAB SETUP scenario.
In the existing RNC synchronization reconfiguration procedure,
only when all RLs are configured successfully, the reconfiguration
procedure is considered as successful. If reconfiguration for one RL
fails, the reconfiguration procedure is considered as failed.
After the reconfiguration procedure is optimized, if reconfiguration
for some RLs fail, the RNS can continue finishing the reconfiguration
procedure.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
2-439
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: whether to enable optimization for the macro
diversity synchronization reconfiguration procedure in the RAB

SETUP scenario.
Related factor: whether the function is necessary.
Benefit: improves the success rate of the macro diversity
synchronization reconfiguration procedure and the service-setup
success rate.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.40 Switch of overLoad control of CMP process

Full Name
Switch of overLoad control of CMP process
Abbreviated Name
procLoadCtrolSwch
Managed Object

3GPP Name
N/A
2-440
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates whether the overload control of the CMP

process is supported.
Instance
RNC
N/A
N/A
Processor Overload Control FG
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the overload
control of the CMP process is supported.

If this function is enabled, the RNC controls the CPU load of the
CMP board based on the process load. This implements overload
control when the CMP board is not heavily loaded but a process
is heavily loaded.
If this function is disabled, the RNC controls the CPU load of the
CMP board only when the CMP board is heavily loaded.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-441
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.2.41 Switch of overLoad control based Qos

Full Name
Switch of overLoad control based Qos
Abbreviated Name
qosLoadCtrolSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the QoS-based overload control is

supported.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-442
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: his parameter indicates whether the QoS-based
overload control is supported.

If this function is enabled, when the CPU is overloaded, some
indexes (such as the call drop rate) of the higher-priority service
are improved.
If this function is enabled, when the CPU is overloaded, the QoS of
the higher-priority service is not improved.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.42 PS Handover Mode when CS is released for Eutran CSFB

Multi-RAB Service
Full Name
PS Handover Mode when CS is released for Eutran CSFB

Multi-RAB Service
Abbreviated Name
csfbPsHo2LteMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the mode of PS handover from UTRAN to

Eutran. PS handover or redirection can be adopted based on UE
capability.
Instance
RNC
ZWF21-03-111
2-443
SJ-20141209142030-013|2015-11-12 (R1.3)
Fast Return to LTE
0: PS Handover
1: Redirection
Unit
N/A
Default Value
0: PS Handover
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the handover mode from UTRAN to
EUTRAN for the CSFB service. PS Handover or Redirection mode

can be used based on the UE capability.
Related factors: UE capability, service performance, and carrier's
requirements.
For PS Handover mode, the handover delay is smaller, but some
UEs may not support the capability. For Redirection mode, services
need to be interrupted, but all UEs support the capability.
This parameter should be set according to UE capability, QOS and
Reason
Operator requirement
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-444
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.43 Timer of Deactivate Compressed Mode for Fast Return to

Eutran
Full Name
Timer of Deactivate Compressed Mode for Fast Return to Eutran
Abbreviated Name
psHoLteMeasTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for deactivating compressed

mode for Fast Return to EUTRAN. If compressed mode is initialized
due to Fast Return to EUTRAN, the timer is activated. If no event
(3C) is reported when the timer expires, the RNC determines
whether to deactivate compressed mode based on the current
signal quality.
Instance
RNC
ZWF21-03-111
Fast Return to LTE
(1..255)s, step 1s
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-445
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates the timer for deactivating compressed
mode for Fast Return to EUTRAN.

Related factors: activation period of compressed mode and UE
measurement period.
If this parameter is set to a smaller value, the activation period
of compressed mode is shorter, and the UE may not finish
measurement. If this parameter is set to a greater value, the
activation period of compressed mode is longer, and the cell
throughput may be affected.
The time of compressed mode active and UE measurement is
Reason
considered to define this default value.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.44 Modify PLMN of NAS Message Switch

Full Name
Modify PLMN of NAS Message Switch
Abbreviated Name
modNasPlmnSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the cell has multiple PLMNs, this parameter indicates whether the
RNC changes the PLMN in a NAS message to the Common PLMN.
Instance
RNC
ZWF21-30-103
2-446
SJ-20141209142030-013|2015-11-12 (R1.3)
0: don't modify
1: modify
Unit
N/A
Default Value
1: modify
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether to modify
the PLMN in an NAS message.

Related factors: UE compatibility.
A pre-R6 UE does not recognize any non-Common PLMN.
Therefore, if a cell has multiple PLMNs, when a pre-R6 UE accesses
a non-Common PLMN CN, the UE cannot make a call.
If a cell has multiple PLMNs, set the value to 1. Otherwise, set it to 0.
The default value considers UE compatibility.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.45 Fill Cn Information IE in Uu Message or Not

Full Name
Fill Cn Information IE in Uu Message or Not
2-447
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
fillCnInfoSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether CN Information is carried in

air-interface messages sent to UEs.
Instance
RNC
ZWF21-30-103
0: don't fill
1: fill
Unit
N/A
Default Value
1: fill
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether to fill the CN
Information IE in a Uu message.
A UE can obtain information about the registered PLMN from the
CN Information IE in a Uu message. When a cell has multiple
PLMNs, some UEs may obtain wrong interpretation through the CN
Information IE and drop out of the network.
Therefore, if a cell has multiple PLMNs, set the value to 1.
Otherwise, set it to 0.
The default value considers UE compatibility.
Reason
Change Take Effect
No
2-448
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.46 Switch of CFN offset Optimization when signal on HSPA

channel
Full Name
Switch of CFN offset Optimization when signal on HSPA channel
Abbreviated Name
CfnOfSigOnHspaSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable the optimization function

for the CFN offset used for sending air-interface messages when
signaling is transmitted over the HSPA channel.
Instance
RNC
ZWF21-01-002
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-449
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: indicates whether to enable the optimization
function for the CFN offset used for sending air-interface messages
when signaling is transmitted over the HSPA channel.
Related factors: whether it is necessary to optimize the delay of
the air-interface synchronization reconfiguration procedure when
signaling is transmitted over the HSPA channel.
If the optimization function is enabled, when signaling is transmitted
over the HSPA channel, the delay of the air-interface synchronization
reconfiguration procedure can be shortened, including the service
setup delay.
If the optimization function is disabled, when signaling is transmitted
over the HSPA channel, the delay of the air-interface synchronization
reconfiguration procedure cannot be shortened.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.47 Function Switch of ETTI Switch due to Congestion

Full Name
Function Switch of ETTI Switch due to Congestion
Abbreviated Name
ettiCongSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-450
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the switch for triggering an ETTI switching

due to a congestion.
Instance
RNC
ZWF25-04-004
ZWF25-01-033
Congestion Control Strategy for HSUPA

Adaptive HSUPA TTI
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
triggering an ETTI transition due to a congestion.

Related factor: network resource allocation optimization.
If the switch is turned on, an ETTI transition is triggered to save
some network resources for higher-priority users when a congestion
occurs.
The default setting is based on the network resource allocation
Reason
optimization.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-451
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.2.48 PCH Barred User Relative Threshold

Full Name
PCH Barred User Relative Threshold
Abbreviated Name
pchBarredUsrThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the relative threshold of the number of

PCH users who are barred from the PCH.
When the actual number of users on the DMP board exceeds the
product of the on-line user number index of the physical board of the
DMP logical processor and this relative threshold, all the users on
the board are barred to transfer to PCH status.
Instance
RNC
ZWF21-04-004
(0..100)%
Unit
Default Value
70
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-452
SJ-20141209142030-013|2015-11-12 (R1.3)
If this parameter is set to a smaller value, the number of UEs that
are barred from the PCH is greater. This ensures that more new
calls can be accessed to the system, but the barred UEs become
IDLE later. If the barred UEs re-send RRC requests, the signaling
load of the system is increased.
If this parameter is set to a greater value, the number of UEs that
are barred from the PCH is smaller. This reduces the probability
that the barred UEs become IDLE, but the number of new calls that
the system supports is reduced.
The default value is set based on the number of new calls that the
Reason
system supports and the signaling load.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.49 Switch of CS Paging Resend in PCH Status

Full Name
Switch of CS Paging Resend in PCH Status
Abbreviated Name
pchCsPageRsdSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for CS paging resending in PCH

status.
Instance
RNC
ZWF21-01-003
Paging
2-453
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates the switch for CS paging resending
in PCH status.
Related factor: paging success rate.
If this parameter is set to "1: On", an RNC resends Paging Type 1
with an IMSI when the RNC fails to page a UE in PCH status with a
URNTI. This increases the paging success rate and shortens the
paging delay, but may affects the Uu interface performance due to a
large number of paging messages on the Uu interface. If the paging
success rate decreases greatly after the PCH function is enabled,
enable this function.
If this parameter value is set to "0: Off", the RNC does not perform
the above resending operation.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-454
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.50 Timer of CS Paging Resend in PCH Status

Full Name
Timer of CS Paging Resend in PCH Status
Abbreviated Name
pchCsPageRsdTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer for CS paging resending in PCH

status.
Instance
RNC
ZWF21-01-003
Paging
1..255, step 1; Unit: 100ms
Unit
100ms
Default Value
16
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the timer for CS paging resending in
PCH status. When receiving a CS paging request in PCH status, an

RNC sends Paging Type 1 with a URNTI and starts this timer. When
receiving a paging response, the RNC stops this timer. When this
timer expires, the RNC resends Paging Type 1 with an IMSI.
Related factors: paging success rate and paging delay.
If this parameter is set to a greater value, the time period for the
RNC to wait the CELL UPDATE message is longer, IMSI paging is
resent later, and the paging delay is longer.
If this parameter is set to a smaller value, the time period for the RNC
to wait the CELL UPDATE message is shorter, IMSI paging is resent
earlier, and the paging delay is shorter. However, if the value of this
2-455
SJ-20141209142030-013|2015-11-12 (R1.3)
parameter is too small, paging may be resent before the UE sends a

CELL UPDATE message. As a result, the resent paging is invalid.
The default value is set based on the paging success rate and
Reason
paging delay.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.51 Improvement Switch for Security Mode Response Timeout

in Uu Interface
Full Name
Improvement Switch for Security Mode Response Timeout in Uu

Interface
Abbreviated Name
secModeTimeoutOpSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the optimization switch for security mode

response message timeout in Uu interface when there are two
connections in Iu interface.
If the switch is off, the RNC releases the UE when the Security
Mode Response message times out in Uu interface when there are
two connections in Iu interface.
If the switch is on, the RNC sends a Security Mode rejection
message to the CN when Security Mode Response message times
out in Uu interface when there are two connections in Iu interface.
Instance
RNC
ZWF21-01-006/ZWF21-01-005
2-456
SJ-20141209142030-013|2015-11-12 (R1.3)
Integrity Protection/Ciphering
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
TS 25.331: "RRC Protocol Specification"
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter indicates the optimization switch for security mode
response message timeout in Uu interface when there are two

connections in Iu interface.
If the switch is off, the RNC releases the UE when the Security
Mode Response message times out in Uu interface when there are
two connections in Iu interface.
If the switch is on, the RNC sends a Security Mode rejection
message to the CN when Security Mode Response message times
out in Uu interface when there are two connections in Iu interface.
Related factor: radio quality in Uu interface.
If the radio quality in Uu interface is good, turn on the switch that
may improve the drop rate because of Security Mode Response
message timeout in Uu interface when there are two connections
in Iu interface.
By default, this function is disabled.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-457
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.2.52 Triggering Report Times for RoT Adjustment Dynamically

Full Name
Triggering Report Times for RoT Adjustment Dynamically
Abbreviated Name
rotTrigTimes
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of triggering reports for RoT

dynamic adjustments. When the adjustment period for dynamic
RoT adjustments expires, if the current RTWP is not lower than
the MT-RTWP, the MT-RTWP may be increased only when the
successive rotTrigTimes-1 RTWP measurement values are not
lower than the MT-RTWP.
Instance
RNC
ZWF21-04-015
Dynamic RoT Control
1..255
Unit
N/A
Default Value
Related Parameters
UNbComMeas.RptPrd
URncInfo.rotAdjstPrd
(rotTrigTimes-1)*RptPrd <= rotAdjstPrd, which means that when
Parameters
you configure rotTrigTimes, ensure that the rotTrigTimes-1 public

measurements (the measurement period is RptPrd) are completed
within the rot adjustment period.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-458
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the number of
triggering reports for RoT dynamic adjustments. To avoid the

ping-pong changes of the RTWP states caused by fluctuated Node
B measurement reports, RoT dynamic adjustments triggering report
times (rotTrigTimes) is set. When the adjustment period for dynamic
RoT adjustments expires, if the current RTWP is not lower than
the MT-RTWP, the MT-RTWP may be increased only when the
successive rotTrigTimes-1 RTWP measurement values are not
lower than the MT-RTWP.
Related factors: the time for increasing the MT-RTWP and the
accuracy of the RTWP state.
The smaller the parameter is, the less accurate the judgment of
the RTWP state will be. However, the MT-RTWP can be increased
more quickly. The greater the parameter is, the more accurate
the judgment of the RTWP state will be. However, the MT-RTWP
is increased slowly.
The default value is set based on the HSUPA throughput and the
Reason
uplink coverage. With this value, the adjustment of the RTWP is

performed more cautiously. The RTWP will not increase until the
adjustment is triggered and maintained for a period of time.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.53 Cpich Ec/No Minimum Threshold for Inter-Frequency

Handover
Full Name
Cpich Ec/No Minimum Threshold for Inter-Frequency Handover
Abbreviated Name
interHoEcNoThrd
Managed Object
2-459
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Cpich EcNo minimum threshold for

inter frequency handover. If reported Cpich EcNo is less than
InterHoEcNoThrd or Cpich RSCP is less than InterHoRscpThrd,
inter frequency handover will not be triggered.
Instance
RNC
ZWF21-03-003
Handover Control FG
(-24..0)dB, step 1dB
Unit
dB
Default Value
-13
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

InterHoEcNoThrd or Cpich RSCP is lower than InterHoRscpThrd,
intra-frequency handover will not be triggered.
Related factors: user experience and network features.
If this parameter is too small , UE can be handed over easily, which
may cause call-drop.
This default value be set according to network planning and user
Reason
experience
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-460
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.2.54 Cpich Rscp Minimum Threshold for Inter-Frequency

Handover
Full Name
Cpich Rscp Minimum Threshold for Inter-Frequency Handover
Abbreviated Name
interHoRscpThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

no intra-frequency handover is triggered.
Instance
RNC
ZWF21-03-003
Handover Control FG
(-120..-25)dBm, step 1dBm
Unit
dBm
Default Value
-108
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-461
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: Cpich RSCP minimum threshold for

intra-frequency handover will not be triggered.
Related factors: user experience and network features.
If this parameter is too small , UE can be handed over easily, which
may cause call-drop.
This default value be set according to network planning and user
Reason
experience
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.55 Inter-frequency Handover Penalty Timer

Full Name
Inter-frequency Handover Penalty Timer
Abbreviated Name
hoToInterPenTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates that this timer is enabled upon an

intra-frequency handover failure. The RNC does not handle
intra-frequency measurement reports until the timer expires.
Instance
RNC
ZWF21-03-003
Handover Control FG
2-462
SJ-20141209142030-013|2015-11-12 (R1.3)
(0..65535)s, step 1s
Unit
Default Value
20s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Handover interval after an intra-frequency
handover failure.
Related factor: system resources.
The larger the parameter value, the longer the interval of the next
handover after an intra-frequency handover failure, which may
increase call drop possibility due to worse system quality. If the
parameter is set to a small value, the next handover will be triggered
shortly after a handover failure. Repeated handover failures will
occur, which wastes system resources.
System resource and handover success rate are considered to
Reason
define this default value.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.56 Switch of checking the UE E-UTRA Capability

Full Name
Switch of checking the UE E-UTRA Capability
2-463
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
cheEutraCapiSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the switch for checking the UE E-UTRA Capability

before initiating a PS handover procedure from UMTS to LTE. If the
function is enabled, the RNC checks whether the UE reports the UE
E-UTRA Capability. If the UE E-UTRA Capability is reported, the PS
handover procedure is permitted.
Instance
RNC
ZWF21-03-110
ZWF21-03-111
Handover with LTE

Fast Return to LTE

0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: switch for checking the UE E-UTRA Capability
before initiating a PS handover procedure from UMTS to LTE.

Related factor: UE compatibility
If the UE has compatibility problems and cannot report the UE
E-UTRA Capability, failure of PS handover from UMTS to LTE
will occur. In this case, it is recommended to turn on this switch,
and initiate a PS handover procedure only when the "UE E-UTRA
Capability" IE is acquired.
The default value is set based on UE compatibility.
Reason
2-464
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.57 Iur Interface Interpolation Switch When QPSK Is Used

Full Name
Iur Interface Interpolation Switch When QPSK Is Used
Abbreviated Name
qpskInterpoIurSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Iur interface switch of interpolation

when QPSK is used.
Instance
RNC
ZWF25-04-006
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
qpskBoostIurSwch
qpskBoostIurSwch can be enabled only when qpskInterpoIurSwch
Parameters
is enabled.
Data Type
long
Parameter Type
Fixed
2-465
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
Yes
Function Switch
Yes
Parameter function: Iur interface switch of interpolation when QPSK
is used.
Configuration rule: If the system performance is verified to be better
when using QPSK interpolation, the function should be enabled.
The function is disabled initially. It can be enabled after being
Reason
verified.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.58 Cell Access Control Switch When Queue is not Empty

Full Name
Cell Access Control Switch When Queue is not Empty
Abbreviated Name
qNotEptyCacSwth
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is cell access control switch, and it is used when

the CAC queue is not empty. It indicates whether the new service
request is processed by Call Admission Control (CAC) algorithm or
is put into the queue directly when the CAC queue is not empty.
Instance
RNC
ZWF21-04-001
Admission Control
2-466
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Refuse or Queue
1: Allow CS Traffic, Refuse or Queue PS Traffic
2: Allow
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
This parameter is cell access control switch, and it is used when
the CAC queue is not empty. It indicates whether the new service
request is processed by Call Admission Control (CAC) algorithm or
is put into the queue directly when the CAC queue is not empty.
Because the period of queue scheduling is very short and the cell
load will be very high when the queue is not empty, the CS service
will be processed by Call Admission Control (CAC) algorithm for its
shorter delay requirement and higher priority, the PS service will
be put into the queue directly.
The CS service should be processed by Call Admission Control
Reason
(CAC) algorithm because of its shorter delay requirement and

higher priority. The PS service can be put into the queue directly
to be scheduled based on the service priority when resource is in
congested state.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-467
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.59 Switch Used for Solving CPC Non-uniform

Full Name
Switch Used for Solving CPC Non-uniform
Abbreviated Name
cpcRecovSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch used for solving CPC

non-uniformity between Node B and UE. If the switch is turned on,
the RNC will solve the CPC non-uniformity problem.
Instance
RNC
ZWF26-01-007
ZWF26-01-008
UL DTX
DL DRX
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for solving CPC non-uniformity between
Node B and UE. If the switch is turned on, the RNC will solve the
CPC non-uniformity problem.
Configuration rule: As a new feature, the parameter is set to "Off "
by default to avoid the compatibility between UEs and RAN. When
the compatibility between UEs and RAN are confirmed adequately
this function is suggested to be enabled.
As a new feature, the parameter is set to "Off " by default to ensure
Reason
smooth upgrade.
2-468
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.60 Iur Interface Boosting Switch When QPSK Is Used

Full Name
Iur Interface Boosting Switch When QPSK Is Used
Abbreviated Name
qpskBoostIurSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Iur interface switch of boosting when

QPSK is used.
Instance
RNC
ZWF25-04-006
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
qpskInterpIurSwch
qpskBoostIurSwch can be enabled only when qpskInterpIurSwch
Parameters
is enabled.
Data Type
long
Parameter Type
Fixed
2-469
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
Yes
Function Switch
Yes
Parameter function: Iur interface switch of boosting when QPSK
is used.
Configuration rule: If the system performance is verified to be better
when using QPSK boosting, the function should be enabled.
The function is disabled initially. It can be enabled after being
Reason
verified.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.61 PS Handover Mode when CS is released for Eutran SRVCC

Multi-RAB Service
Full Name
PS Handover Mode when CS is released for Eutran SRVCC

Multi-RAB Service
Abbreviated Name
srvccPsHo2LteMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover mode from UTRAN to

EUTRAN for the SRVCC service. PS Hanover or Redirection mode
Instance
RNC
ZWF21-03-111
Fast Return to LTE

2-470
SJ-20141209142030-013|2015-11-12 (R1.3)
0: PS Handover
1: Redirection
Unit
N/A
Default Value
0: PS Handover
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the handover mode from UTRAN to
EUTRAN for the SRVCC service. PS Hanover or Redirection mode

Related factors: UE capability, service performance, and carrier's
requirements.
For PS Hanover mode, the handover delay is smaller, but some UEs
may not support the capability. For Redirection mode, services need
to be interrupted, but all UEs support the capability.
This parameter should be set according to UE capability, QOS and
Reason
Operator requirement
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.62 Timer for CSFB Identification

2-471
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Timer for CSFB Identification
Abbreviated Name
csfbIdentifyTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used for CSFB identification. When pre-redirection

information is not indicated in RRC connection request, if the time
between RRC connection request and CS RAB assignment is not
greater than the parameter, the service is indicated CSFB.
Instance
RNC
ZWF21-03-111
Fast Return to LTE
0..65535 s
Unit
Default Value
10s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: identifies CSFB
Related factors: average RAB establishment time

A large value indicates a large possibility of CSFB identification,
which may cause unnecessary fast return to EUTRAN. A small
value indicates a small possibility of CSFB identification, which may
cause CSFB to fail to fast return to EUTRAN.
This parameter should be set according to average RAB establish
Reason
time.
Change Take Effect
No
2-472
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.63 CFN offset compensation value

Full Name
CFN offset compensation value
Abbreviated Name
cfnOffsetComp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates CFN offset compensation value.

The value is bigger, the CFN offset is bigger;
The value is smaller, the CFN offset is smaller.
Instance
RNC
ZWF21-01-002
0..255
Unit
frames
Default Value
10, 10, 15, 15, 15, 20, 20, 20, 25, 25, 30, 30, 40
Related Parameters
N/A
N/A
Parameters
Data Type
long[13]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-473
SJ-20141209142030-013|2015-11-12 (R1.3)
Main function: This parameter indicates CFN offset compensation
value.
When the radio environment is bad, signalling transmission cost
more time because of more retransmission, so the CFN offset value
need increased.
Influence factor: the radio environment and the number of
retransmission
The smaller the parameter is, the CFN offset value may too
short, if the number of retransmission is much when the radio
environment is bad, when the activation time arrival in UTRAN, the
UE doesn't receive the reconfiguratin message, which may cause
the reconfigruation procedure failure.
The bigger the parameter is, the CFN offset value may too long,
which may cause unnecessary wait time of UTRAN and may cause
handover not in time
, which may cause drop.
The function is used when signal rate is 13.4k.
The default value is set based on the on-site situations. The value
Reason
can be modified by actual situdation.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.64 Switch for CFN offset compensation function

Full Name
Switch for CFN offset compensation function
Abbreviated Name
cfnOffsetCompSwch
Managed Object

3GPP Name
N/A
2-474
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the switch for the CFN offset compensation
function.
Instance
RNC
ZWF21-01-002
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates the switch for the CFN offset compensation
function.
After this switch is turned on, the reconfigured CFN offset is added
with a compensation value CfnOffsetComp when the radio quality
is bad.
Related factors: CFN offset compensation value(CfnOffsetComp),
Threshold for CFN offset compensation(CfnCompEcNoThrd,
CfnCompRscpThrd)
When the switch is turned on:
If threshold is too high to trigger CFN offset compensation or
the CFN offset compensation value is too small, the effect of the
function is not obvious.
If threshold is too low, which is easy to trigger CFN offset
compensation, or the CFN offset compensation value is too large,
the call drop rate may increase due to delayed handover because of
unnecessary waiting of the RNC.
This parameter is set based on the network planning.
Reason
Change Take Effect
New Connection
No
2-475
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.65 Switch for Forbidding Increase SIR Target of HSUPA UE

Full Name
Switch for Forbidding Increase SIR Target of HSUPA UE
Abbreviated Name
forbidHsSirIncSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for forbidding the increase of

SIR target of HSUPA UE. After the switch is turned on, if the RNC
receives the indication from Node B to forbid HSUPA UE from
increasing the SIR target, then the SIR target of HSUPA UE cannot
be increased.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-476
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
forbidding the increase of SIR target of HSUPA UE. After the switch
is turned on, if the RNC receives the indication from Node B to forbid
HSUPA UE from increasing the SIR target, then the SIR target of
HSUPA UE cannot be increased.
Related factors: HSUPA service quality and system capacity.
If the switch is turned on, the SIR target will not be increased when
the HSUPA UE power reaches the upper limit, and the E-DPDCH
power will not be reduced. In this way the HSUPA UE rate is
improved when the power is limited. Also, if the SIR target cannot
be increased, the system capacity will be improved.
If the switch is turned off, the SIR target will be increased when
the HSUPA UE power reaches the upper limit and the E-DPDCH
power will be reduced. In this way the HSUPA service quality will
be affected.
Adjustment suggestion: If the HSUPA UE power limitation always
occurs and the HSUPA service performance is affected, this function
can be enabled to improve the service quality when the UE power is
limited.
The default setting is based on the algorithm used before version
Reason
upgrade.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-477
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.66 Waiting Timer of Combining the Multi RL E-DCH FP to

Release from SIR Target Increase Forbidden State
Full Name
Waiting Timer of Combining the Multi RL E-DCH FP to Release from

SIR Target Increase Forbidden State
Abbreviated Name
noNHR13MulRlTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the waiting timer of combining the multi

RL E-DCH FP to release from the SIR target increase forbidden
state. When the HSUPA UE is in the multi RL state, this timer starts
after receiving an indication from a Node B to release SIR target
increase. If the timer expires and no forbidden SIR target increase
indication is received, the SIR target increasing will be allowed.
Instance
RNC
N/A
N/A
(0..1000)ms, step 20ms
Unit
ms
Default Value
60ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-478
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the waiting timer of
combining the multi RL E-DCH FP to release from the SIR target

increase forbidden state.
Related factors: time delay of different RLs and the service quality.
If the waiting time is too long, releasing SIR target increase will
wait too long time in case of UE with multi RLs, which affects the
service quality.
If the waiting time is too short, it will have no time to collect the FPs
with NHR (Number of HARQ Retransmission) from all NodeBs, and
the system will make an incorrect decision if the link delays are quite
different in macro diversity status.
The default value can ensure that there is enough time to collect the
Reason
FPs from all RLs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.67 Waiting Timer of No Uplink E-DCH FP to Release from SIR

Target Increase Forbidden State
Full Name
Waiting Timer of No Uplink E-DCH FP to Release from SIR Target

Increase Forbidden State
Abbreviated Name
noEdchFpTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-479
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the waiting timer of no uplink E-DCH FP

to release from SIR target increase forbidden state. When the
HSUPA UE in the SIR target increase forbidden state, if the time of
no E-DCH FP received is longer than this waiting timer, the SIR
target increasing will be allowed.
Instance
RNC
N/A
N/A
(0..60000)ms, step 20ms
Unit
ms
Default Value
500ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the waiting timer of
no uplink E-DCH FP to release from SIR target increase forbidden

state.
Related factors: concurrent DCH service quality and system
capacity.
If the waiting time is too long, releasing SIR target increase will wait
too long time when the UE has no E-DCH FP, and during the waiting
time the UE power might be reduced to a normal level, and if the UE
has a DCH service, the DCH service quality might be affected.
If the waiting time is too short, releasing SIR target increase
immediately when there is no E-DCH FP. In this case, the system
might make a wrong decision and enable SIR target to be increased,
which affects the system capacity.
In the default waiting time, the radio condition might be changed,
Reason
and UE power might be not limited.
Change Take Effect
No
2-480
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.68 SIP Service Optimization Switch

Full Name
SIP Service Optimization Switch
Abbreviated Name
sipOptSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the strategy for single SIP service. If the
value is 1, SIP is allowed to perform channel transition as normal
PS I service. If the value is 0, SIP is not allowed to perform channel
transition.
Instance
RNC
ZWF21-02-A
VoIP Package
IMS Service FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-481
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: strategy for single SIP service If the value is 1,
SIP is allowed to perform channel transition as normal PS I service.

If the value is 0, SIP is not allowed to perform channel transition.
Related factors: resource usage and service characteristics
If the value is 0, SIP will always maintain 8 kbps and has a high
priority.
If the value is 1, SIP is allowed to perform channel transition as
normal PS I service. SIP may be transmitted to IDLE based on
traffic measurement report to release related resource.
This default value is set according to the resource usage and
Reason
service features.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.69 Switch of Iu IE Higher bitrates than 16 Mbps flag" Function"

Full Name
Switch of Iu IE Higher bitrates than 16 Mbps flag" Function"
Abbreviated Name
iu16mIeSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates whether to support the "Higher bitrates

than 16 Mbps flag" IE on the Iu interface.
The value 1 means that the RNC supports the function. The RNC
will carry the "Higher bitrates than 16 Mbps flag" IE in the Initial
Direct Transfer and Relocation Complete messages.
The value 0 means that the RNC doesn't support the function.
2-482
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
0: Off
1: ON
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
Parameter function: functional switch of "Higher bitrates than 16
Mbps flag" IE on the Iu interface

Related factor: Iu interface compatibility
If the CN supports this Iu IE, the function can be set to 1 to be
enabled.
If the CN does not support this Iu IE, the function must be set to 0
to be disabled.
It is recommended to set this parameter to 0. If the RNC carries
this Iu IE, the Relocation Complete decode error bug may occur
on some old version CNs.
This parameter is set to 0 to maximize Iu interface comparability.
Reason
The RNC can enable this function only if the CN supports this IE.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-483
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.70 Intra-frequency Handover Penalty Timer

Full Name
Intra-frequency Handover Penalty Timer
Abbreviated Name
hoToIntraPenTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the penalty duration of intra-frequency

handover failure. When a link to be added into the active set is
rejected in Event 1A/1C, the timer is initiated, and the RNC will not
handle the intra-frequency measurement event 1A/1C reported by
this rejected cell until the timer expires.
Instance
RNC
ZWF21-03-001
Handover Control FG
(0..255)s, step 1s
Unit
Default Value
5s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Function: This parameter specifies the prohibition handover timer
after adding a new link into the active set fails. After a new link fails
to be added into the active set, the next attempt is allowed after the
time interval specified by this parameter.
Related factor: system resources.
If the parameter is set to large value, the interval of the next
handover after a link is rejected to be added into the active set
in Event 1A/1C is long, which may increase call drop possibility
due to worse system quality. If the parameter is set to a small
value, the next handover will be triggered shortly after a handover
2-484
SJ-20141209142030-013|2015-11-12 (R1.3)
failure. Repeated handover failures will occur, which wastes system

resources.
The default parameter value is set based on the system resources
Reason
and handover success rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.2.71 CPICH Ec/No Threshold for Redirection without

Measurement
Full Name
CPICH Ec/No Threshold for Redirection without Measurement
Abbreviated Name
rediNoMeaEcNoThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CPICH Ec/No threshold that is used

for determining non-measurement-based redirection. In case of only
PS service, the RNC does not perform non-measurement-based
redirection if the best cell's CPICH Ec/No is larger than
RediNoMeaEcNoThd and the CPICH RSCP is larger than
RediNoMeaRscpThd.
Instance
RNC
ZWF21-03-050

2-485
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
-16
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: CPICH Ec/No threshold used for determining
non-measurement-based redirection.
Related factors: user experience and network characteristics.
If the parameter is too large, non-measurement-based redirection
is performed even if the used frequency quality is not poor. In this
case, the UE cannot be served by a more appropriate cell through a
measurement-based handover.
If the parameter is too small, non-measurement-based redirection is
not performed even if the used frequency quality is very poor. In this
case, a call drop may occur during a measurement-based handover.
The default value is set according to the network plan and user
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.72 CPICH RSCP Threshold for Redirection without Measurement

Full Name
CPICH RSCP Threshold for Redirection without Measurement
Abbreviated Name
rediNoMeaRscpThd
2-486
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CPICH RSCP threshold that is used

for determining non-measurement-based redirection. In case of only
PS service, the RNC does not perform non-measurement-based
redirection if the best cell's CPICH Ec/No is larger than
RediNoMeaEcNoThd and the CPICH RSCP is larger than
RediNoMeaRscpThd.
Instance
RNC
ZWF21-03-050
Unit
dBm
Default Value
-111
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: CPICH RSCP threshold used for determining
non-measurement-based redirection.
Related factors: user experience and network characteristics.
If the parameter is too large, non-measurement-based redirection
is performed even if the used frequency quality is not poor. In this
case, the UE cannot be served by a more appropriate cell through a
measurement-based handover.
If the parameter is too small, non-measurement-based redirection is
not performed even if the used frequency quality is very poor. In this
case, a call drop may occur during a measurement-based handover.
The default value is set according to the network plan and user
Reason
experience.
Change Take Effect
2-487
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.73 Cpich Rscp Threshold for Neighbouring Cell Monitoring

Full Name
Cpich Rscp Threshold for Neighbouring Cell Monitoring
Abbreviated Name
nbrCellMonRscpThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CPICH RSCP threshold that is used to

determine statistics of neighbor cells during neighbor cell monitoring.
If the CIPCH RSCP reported by a neighbor cell is smaller than
NbrCellMonRscpThrd, this measurement report is not recorded.
Instance
RNC
ZWF21-20-012
Neighbouring Cell Monitoring
Neighboring Cell Monitoring Feature Guide
(-120..-25)dBm, step by 1dBm
Unit
dBm
Default Value
-108
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-488
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: CIPCH RSCP threshold used for determining
statistics of neighbor cells. If the CIPCH RSCP reported by

a neighbor cell is smaller than NbrCellMonRscpThrd, this
measurement report is not recorded.
Related factors: precision for determining a missing neighbor cell.
If this parameter is too small, a neighbor cell with poor signal quality
may be determined as a missing neighbor cell and recorded in the
report of missing neighbor cells.
If this parameter is too large, a missing neighbor cell may not be
detected.
The default value is set according to the precision for determining
Reason
a missing neighbor cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.74 Protect Timer of RAB Setup Response

Full Name
Protect Timer of RAB Setup Response
Abbreviated Name
rabSetupTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-489
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the timer that is used to control the wait
time before the RNC sends an RAB Setup Response after receiving
an RAB Setup Request through the Iu interface.
This timer is started when the RNC receives an RAB Setup Request
through the Iu interface.
This timer is stopped when the RNC sends an RAB Setup Response
through the Iu interface.
At expiry of this timer, the RNC sends an RAB Setup Failure
response through the Iu interface.
Instance
RNC
N/A
N/A
(1..100)s, step 1s
Unit
Default Value
14
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: the timer used to control the wait time before
the RNC sends an RAB Setup Response after receiving an RAB

Setup Request through the Iu interface.
Related factors: RAB setup success ratio and user experience.
If the parameter is too small, the timer expires after a short time
period, which increases the probability of RAB Setup Failure
response from the RNC and decreases the RAB setup success
ratio. However, user experience is good due to timely release of
resources at the RNC side.
If the parameter is too large, the timer expires after a long time
period, which decreases the probability of RAB Setup Failure
response from the RNC without influencing the RAB setup success
ratio. However, user experience may degrade due to delayed
release of resources at the RNC side.
Note: The value of URncFunction.RabSetupTimer must be larger
than that of URncFunction.waitRbStTimer.
2-490
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set according to the RAB setup success ratio
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.75 Time of Waiting for RB Setup Response over Uu Interface

Full Name
Time of Waiting for RB Setup Response over Uu Interface
Abbreviated Name
waitRbStTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timer that is used to control the wait
time before the RNC receives an RB Setup Response message
over the Uu interface.
This timer is started when the RNC sends an RB Setup message
to a UE.
This timer is stopped when the RNC receives an RB Setup response
from the UE.
At expiry of this timer, the RNC determines that an RB setup failure
occurs at the Uu interface.
Instance
RNC
ZWF21-01-008
(1..100)s, step 1s
2-491
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
Default Value
5s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: the timer used to control the wait time before
the RNC receives an RB Setup response over the Uu interface.

Related factors: message transmission time over the Uu interface,
UE processing time, user experience, and call reestablishment time.
If the parameter is too small, the probability that the RNC receives
an RB Setup response decreases and the call drop ratio increases.
If the parameter is too large, the probability that the RNC receives
an RB Setup response increases. However, if the Uu interface
quality degrades, call re-establishment or redial is delayed due
to unnecessary wait time, which results in degradation of user
experience.
Note: The value of URncFunction.RabSetupTimer must be larger
than that of URncFunction.waitRbStTimer.
The default value is set to 5 (seconds) according to the message
Reason
transmission time over the Uu interface, UE processing time, user

experience, and call re-establishment time.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2-492
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.76 Period of Cn Invoke Trace Location Measurement

Full Name
Period of Cn Invoke Trace Location Measurement
Abbreviated Name
cnInLocaMeasPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cycle of periodic UE location

measurement (RTT + UE RxTx) triggered by CN Invoke Trace.
Instance
RNC
ZWF21-20-015
CN Invoked UE Trace
ZTE UMTS CN Invoked UE Trace Feature Guide
(2..600)s, step 1s
Unit
Default Value
30s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: the cycle of periodic UE location measurement
triggered by the CN Invoke Trace feature.

Related factors: balance between UE movement speed and
measurement frequency.
The smaller the parameter is, the more frequently the UE location
measurement is performed. A small parameter value is used for
location measurement of fast-moving UEs. The larger the parameter
is, the less frequently the UE location measurement is performed.
A large parameter value is used for location measurement of
slow-moving UEs.
The default is a middle value because the movement speed of a
Reason
UE cannot be predicted.
2-493
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.77 Switch of Using Pre-Configurated PLMN in CS&PS

Coordination
Full Name
Switch of Using Pre-Configurated PLMN in CS&PS Coordination
Abbreviated Name
prePlmnConSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the preconfigured PLMN

information is used during IMSI-based CS and PS coordination in
case of network sharing.
Instance
RNC
ZWF21-30-100
RAN Sharing FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
2-494
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
preconfigured PLMN information is used.

Related factors: roaming protocol.
This parameter is set to 1 if UEs support different CS and PS
roaming protocols in case of network sharing. Otherwise, this
parameter is set to 0.
This switch is disabled by default.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.78 CSMT IE for CSFB Identification Switch

Full Name
CSMT IE for CSFB Identification Switch
Abbreviated Name
csmtIdentifySwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the CSMT IE is used for CSFB

identification. If this parameter is set to 1 and the CSMT IE is
detected in an NAS message LOCATION UPDATING REQUEST by
the RNC, a CSFB service is identified.
2-495
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-03-111
Fast Return to LTE
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: CSFB identification by CSMT.
Related factors: correct CN configuration.

In case of correct CN configuration, this parameter is set to On to
improve the accuracy of CSFB service identification. In case of
incorrect CN configuration, this parameter is set to Off to avoid
erroneous identification.
The default value is set according to CN configuration.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2-496
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.79 Switch of statistics the inter-board repeated RRC connection

request message
Full Name
Switch of statistics the inter-board repeated RRC connection

request message
Abbreviated Name
intBrdRrcReqReSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC counts RRC connection

establishment requests that are retransmitted between boards.
Instance
RNC
N/A
N/A
Connection Management
0: OFF
1: ON
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch used to enable or disable statistics of
RRC connection establishment requests retransmitted between

boards.
Related factors: This parameter is configured to improve the RRC
connection establishment success ratio according to the number
of RRC connection establishment requests retransmitted between
boards in the network.
2-497
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set to 1, meaning that the switch is enabled. The
Reason
statistics of RRC connection establishment requests retransmitted

between boards can improve the RRC connection establishment
success ratio.
Change Take Effect
Immediately at commit
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.80 The volume threshold of statistics the inter-board repeated

RRC connection request message
Full Name
The volume threshold of statistics the inter-board repeated RRC

connection request message
Abbreviated Name
intBrdRrcReqReThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a threshold used for controlling the traffic

increase caused by the statistics of retransmitted RRC connection
establishment requests between boards.
Instance
RNC
N/A
N/A
Connection Management
V3: 5..200
V4: 5..400
Unit
times
2-498
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
V3: 30
V4: 250
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: threshold used for limiting the increase of
inter-board traffic caused by the statistics of RRC connection

establishment requests between boards.
Related factors: This parameter is configured to reduce the impact
of too many inter-board messages on the system load.
The default value is set according to the highest inter-board
Reason
processing capacity of the hardware.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.81 Filter Coefficient used for the filter of equivalent User

Number for PS Load control
Full Name
Filter Coefficient used for the filter of equivalent User Number for
PS Load control
Abbreviated Name
psLCUsrNumFiltCoef
Managed Object

2-499
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the filter coefficient of the number of uplink

equivalent users for PS load control.
The filter formula is as follows:
F(n) = (1 - a) F(n-1) + a M(n)
Where,
F(n) indicates the filtering result.
F(n-1) indicates the previous filtering result.
M(n) indicates the latest number of uplink equivalent users.
a indicates the filter coefficient, which is determined by this
parameter.
Instance
RNC
N/A
N/A
0..1, step 0.01
Unit
N/A
Default Value
.5
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: filter coefficient used for filtering the number of
uplink equivalent users for PS load control.

Configuration rule: This parameter must be configured to ensure the
filtering effect and timely statistics of equivalent users.
The larger the parameter is, the greater effect on the filtering result
the latest number of uplink equivalent users has.
The smaller the parameter is, the smaller effect on the filtering result
the latest number of uplink equivalent users has.
The default value is set according to the requirement that the weight
Reason
of historical load for determining the cell load is 50%.
Change Take Effect
No
2-500
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.82 RNC Switch of Blind Handover from Large Coverage Cell

to Small Coverage Cell
Full Name
RNC Switch of Blind Handover from Large Coverage Cell to Small

Coverage Cell
Abbreviated Name
lar2SmlCovBHoRncSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether RNC-level blind handovers from

a large-coverage cell to a small-coverage cell are allowed. If the
signal quality of a large-coverage cell reaches a certain threshold, a
blind handover is performed to transfer the UE to a small-coverage
cell on the same site for load sharing.
Instance
RNC
ZWF21-04-036
Inter Band Offload
Inter Band Offload FG
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
2-501
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter controls RNC-level blind
handovers from a large-coverage cell to a small-coverage cell.

Related factors: load sharing.
In case of a site with both large-coverage cells and small-coverage
cells, blind handovers are performed to transfer UEs to a
small-coverage cell if the signal quality of a large-coverage cell
reaches a certain threshold. Through blind handovers, the RNC
achieves load sharing by distributing the load in the central area to
small-coverage cells and the load in edge areas to large-coverage
cells.
The default value is set according to the load distribution in the
Reason
network.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.2.83 MicroNodeb Number Threshold Used for self configuration

Full Name
MicroNodeb Number Threshold Used for self configuration
Abbreviated Name
mnbThrdSelfCfg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-502
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the threshold number of micro NodeBs

used for self configuration in unit time.
Instance
RNC
N/A
N/A
(1..65535)
Unit
NA
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
number threshold used for the self configuration in timer interval

of flow control.
Related factor: The effect caused by the self configuration of the
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2-503
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.84 MicroNodeb Number Threshold Used for self optimization

Full Name
MicroNodeb Number Threshold Used for self optimization
Abbreviated Name
mnbThrdSelfOptm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold number of micro NodeBs

used for self optimization in unit time.
Instance
RNC
N/A
N/A
(1..65535)
Unit
NA
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
number threshold used for the self optimization in timer interval of

flow control.
Related factor: The effect caused by the self optimization of the
Reason
Change Take Effect
No
0
2-504
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
add
2.2.85 Time Accuracy for Smart Handover

Full Name
Time Accuracy for Smart Handover
Abbreviated Name
SmartHoTimeAccu
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the tolerant time accuracy for controlling

smart handover.
Instance
RNC
ZWF21-03-001
Smart Soft Handover FG
065535
Unit
ms
Default Value
20
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
2-505
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter sets the time accuracy for
smart handover.
Related factor: processing delay.
The parameter is related to processing delay. The smaller the
processing delay is, the more accurate the target handover cell is.
The default value is set based on the delay in processing.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.86 Get BFN Switch

Full Name
Get BFN Switch
Abbreviated Name
getBfnSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the RNC to obtain the BFN of

cells.
When this parameter is set to ""1: On"", the RNC obtains the BFN of
this RNC and its neighboring cells.
Instance
RNC
ZWF21-03-001
2-506
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
NA
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets whether the function of
obtaining cell BFN is enabled.

Related factor: If the small cell function is required, this function
must be enabled.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.87 Update BFN Period

Full Name
Update BFN Period
Abbreviated Name
updateBFNPeriod
Managed Object

2-507
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to control the period of updating a cell BFN

in the DBS.
A larger parameter value indicates a longer period of updating a
cell BFN in the DBS.
Instance
RNC
ZWF21-03-001
10180
Unit
minute
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the period of updating cell
BFN information to the DBS.

Related factors: the clock drift between the RNC and NodeB.
If the clock drift is very large, this parameter should be set to a small
value; otherwise, the parameter can be set to a large value.
The default value is set based on the clock drift between the RNC
Reason
and the NodeB.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-508
SJ-20141209142030-013|2015-11-12 (R1.3)
Add
2.2.88 FACH CAC Tolerable Minimum Bit Rate for High Cell Load
Full Name
FACH CAC Tolerable Minimum Bit Rate for High Cell Load
Abbreviated Name
fachCacToMinRateHL
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum data rate threshold for new
service accessing the FACH when the load of a cell is high. If the
data rate of each service on the FACH is lower than this threshold
due to FACH overload, the new service is forbidden to access the
FACH.
Instance
RNC
ZWF21-04-039
Load Adaptive Congestion Control
Load Adaptive Congestion Control FG
(100, 200, , 14400) bps, step: 100 bps
Unit
bps
Default Value
100bps
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-509
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: When the cell is in high load stateif the
average data rate of users in CELL_FACH state is lower than this

parameter due to congestion caused by too many users on the
FACH, new traffic will be forbidden to access the FACH.
Related factors: The larger the parameter value is, the fewer the
users that can access the FACH are. The smaller the parameter
value is, the lower the minimum data rate that can be guaranteed is.
Adjustment suggestion: This parameter is set based on the average
data rate on the FACH and the number of users to be carried on
the FACH.
The default value is set based on the number of UEs carried on
Reason
the FACH.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.89 The PS Wait Timer to Forbid DRBC in Emergency Call CSFB

Process via PS Handover
Full Name
The PS Wait Timer to Forbid DRBC in Emergency Call CSFB

Process via PS Handover
Abbreviated Name
tmrCSFBPSEmgWait
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-510
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the PS waiting timer to forbid DRBC in an

emergency call CSFB process during a PS handover. The timer
starts after a PS service is successfully relocated. The PS service is
forbidden from executing DRBC until the timer expires.
Instance
RNC
ZWF21-03-101
(0..255) s, step: 1 s
Unit
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the timer for prohibiting
DRBC for PS services in the Emergency Call CSFB process with

PS handover.
Related factors: emergency call user experience.
If the parameter value is large, it helps improve the success rate
of CS emergency call admission, but it may affect PS service
experience.
If the parameter value is too small, it may cause CS emergency
call admission to fail.
The default value is set based on the time gap between a successful
Reason
PS relocation and the initiation of CS assignment.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-511
SJ-20141209142030-013|2015-11-12 (R1.3)
Add
2.2.90 ARP Priority Level to Identify Emergency Call in SRVCC

Process
Full Name
ARP Priority Level to Identify Emergency Call in SRVCC Process
Abbreviated Name
sRVCCEmgCalARP
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ARP priority level to identify an

emergency call during an SRVCC process. If it matches the ARP
configured by the CN, the SRVCC is considered as an emergency
call.
Instance
RNC
ZWF21-03-120
SR-VCC
SR-VCC FG
0..15
Unit
NA
Default Value
Related Parameters
sRVCCEmgCalSwch
This parameter is valid only when sRVCCEmgCalSwch is set to
Parameters
"1: On".
Data Type
BYTE
Parameter Type
Negotiation With CN
Yes
Function Switch
No
2-512
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter sets the ARP priority of an emergency call
for identification in the SRVCC process.

Related factorsto be negotiated with the CN.
The value needs to be negotiated with the CN. Only when the
parameter value matches the ARP value configured at the CN will a
call be considered as an emergency call in the SRVCC process.
The default value is set because the value "0" is not used and can
Reason
be configured to identify a CS service as an emergency call.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.91 The RNC Lever Switch for Attempting Switching to

the CELL_FACH State After Congestion when PS RB
Establishment
Full Name
The RNC Lever Switch for Attempting Switching to the CELL_FACH

State After Congestion when PS RB Establishment
Abbreviated Name
toFachbyCongSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is an RNC-level switch that is used for determining

whether to attempt CELL_FACH admission for PS RB establishment
or not when the network is congested.
Instance
RNC
ZWF21-04-037
2-513
SJ-20141209142030-013|2015-11-12 (R1.3)
Admission Control Enhancement in Resource Congestion
0: Off
1: On
Unit
NA
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a RNC-level switch that
is used for controlling whether to attempt the admission of the

CELL_FACH state for the PS RB establishment when the network
is congested.
This function helps prevent the PS service from attempting RRC
connections too many times after it is denied in CELL_DCH. It helps
reduce the network signaling load.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-514
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.92 Cpich Ec/No Minimum Threshold for MF-HSDPA

Configuration
Full Name
Cpich Ec/No Minimum Threshold for MF-HSDPA Configuration
Abbreviated Name
confMfEcNoThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum Cpich EcN0 threshold for

MF-HSDPA configuration.
If the configurations of Multicell (MC) and Multiflow (MF) are in
conflict with each other, the system determines the quality of the
assisting serving cell in an MF cell pair. If Cpich EcN0 is higher than
confMfEcNoThrd and Cpich RSCP is higher than confMfRscpThrd,
this MF cell pair can be considered as a candidate.
The conflict configuration principle is as follows: MC is configured to
three carriers or four carriers. MC is dual carriers and MF supports
only single-frequency MF.
Instance
RNC
ZWF26-05-001
Multi-Flow HSDPA
Multiflow HSDPA FG
(-24 0) dB, step: 1 dB
Unit
dB
Default Value
-8
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-515
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: this parameter is used to determine whether an
MF cell pair is valid. For the assisting serving cell of the MF cell pair,
if Cpich Ec/N0 is higher than confMfEcNoThrd and Cpich RSCP is
higher than confMfRscpThrd, the MF cell pair can be a candidate,
otherwise, the MF cell pair is not considered.
Related factors: user experience and network planning
If this parameter value is too small, an MF cell pair with poor
performance may be configured, which affects user experience.
If this parameter value is too large, there may be no available MF
cell pairs, and MF-HSDPA cannot be applied.
The default value is set based on network planning and user
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.93 Cpich Rscp Minimum Threshold for MF-HSDPA

Configuration
Full Name
Cpich Rscp Minimum Threshold for MF-HSDPA Configuration
Abbreviated Name
confMfRscpThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-516
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the minimum Cpich RSCP threshold for

MF-HSDPA configuration.
If the configurations of Multicell (MC) and Multiflow (MF) are in
conflict with each other, the system determines the quality of the
assisting serving cell in an MF cell pair. If Cpich EcN0 is higher than
confMfEcNoThrd and Cpich RSCP is higher than confMfRscpThrd,
this MF cell pair can be considered as a candidate.
The conflict configuration principle is as follows: MC is configured to
three carriers or four carriers. MC is dual carriers and MF supports
only single-frequency MF.
Instance
RNC
ZWF26-05-001
Multi-Flow HSDPA
Multiflow HSDPA FG
(-115-25) dBm, step: 1 dBm
Unit
dBm
Default Value
-80
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: this parameter is used to determine whether an
MF cell pair is valid. For the assisting serving cell of the MF cell pair,
if Cpich Ec/N0 is higher than confMfEcNoThrd and Cpich RSCP is
higher than confMfRscpThrd, the MF cell pair can be a candidate,
otherwise, the MF cell pair is not considered.
Related factors: user experience and network planning
If this parameter value is too small, an MF cell pair with poor
performance may be configured, which affects user experience.
If this parameter value is too large, there may be no available MF
cell pairs, and MF-HSDPA cannot be applied.
The default value is set based on network planning and user
Reason
experience.
Change Take Effect
No
2-517
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.94 Period of Load Triggered Handover or Redirection from

UMTS to LTE
Full Name
Period of Load Triggered Handover or Redirection from UMTS to

LTE
Abbreviated Name
loadTrg2LtePeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period of load-triggered handover

or redirection from UMTS to LTE. If the cell load is high, UEs are
periodically handed over or redirected to LTE neighboring cells in
priority order.
Instance
RNC
ZWF21-03-030
Load Based PS HO to LTE
(0..100) s, step: 1 s
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
2-518
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the period of load-triggered
handover or redirection from UMTS to LTE.

Related factors: system capacity and user experience.
If the parameter value is smaller than the time from sending the
measurement control to completing the handoverthe effect of load
reducing is not satisfactory when the period expiresand more
UEs will be chosen to be perform handover. Thus user experience
is affected.
If the parameter value is larger than the time from sending the
measurement control to completing the handoverthe rate of load
reducing is also reduced. Thus the system capacity is affected.
The default value is set based on the system capacity and user
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.95 Heavy Traffic Counter Threshold for Changing Preferred

Camping to Random Camping in Multi-carriers Network
Full Name
Heavy Traffic Counter Threshold for Changing Preferred Camping

to Random Camping in Multi-carriers Network
Abbreviated Name
pre2RdoHyTrfThd
Managed Object

3GPP Name
N/A
2-519
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the threshold for the number of times

that a cell in the heavy traffic state to change preferred camping to
random camping in a multi-carrier network. For a cell of preferred
carriers, if the number of times that the traffic of a cell meets the
conditions of heavy traffic over consecutive periods of time exceeds
the threshold indicated by this parameter, the camping strategy of
the cell is changed from preferred camping to random camping.
Instance
RNC
ZWF21-01-011
1255
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the heavy traffic counter
threshold for changing preferred camping to random camping in a

multi-carrier network.
Related factor: timeliness of camping strategy change, user
experience, and UE battery consumption.
The smaller the parameter value is, the faster it is to respond to the
heavy traffic state and the easier it is to trigger the camping strategy
switch. But frequent system information update may increase UE
battery consumption.
The larger the parameter value is, the slower it is to respond to the
heavy traffic state and the more difficult it is to trigger the camping
strategy switch and increase the access success rate. Thus user
experience is affected.
The default value is set based on the timeliness of camping strategy
Reason
change, user experience, and battery consumption of UEs.
Change Take Effect
2-520
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.96 Light Traffic Counter Threshold for Changing Random

Camping to Preferred Camping in Multi-carriers Network
Full Name
Light Traffic Counter Threshold for Changing Random Camping to

Preferred Camping in Multi-carriers Network
Abbreviated Name
rdo2PreLtTrfThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold for the number of times that
a cell in the light traffic state to change random camping to preferred
camping in a multi-carrier network. For a cell of preferred carriers,
if the number of times that the traffic of a cell and its neighboring
cells which share the load meets the conditions of light traffic over
consecutive periods of time exceeds the threshold indicated by this
parameter, the camping strategy of the cell is changed from random
camping to preferred camping.
Instance
RNC
ZWF21-01-011
1255
Unit
NA
Default Value
8
2-521
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the light traffic counter
threshold for changing random camping to preferred camping in a

multi-carrier network.
Related factor: timeliness of camping strategy change, user
experience, and UE battery consumption.
The smaller the parameter value is, the faster it is to respond to the
light traffic state and the easier it is to trigger the camping strategy
switch. But the frequent system information update may increase
UE battery consumption.
The larger the parameter value is, the slower it is to respond to the
light traffic state and the more difficult it is to trigger the camping
strategy switch. In this case, the service distribution among cells
may be affected, which is related to the actual balancing strategy.
The default value is set based on the timeliness of camping strategy
Reason
change, user experience, and battery consumption of UEs.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.97 High Speed Signalling Switch for the UE from Common State
to CELL_DCH state Triggered by CS call
2-522
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
High Speed Signalling Switch for the UE from Common State to

CELL_DCH state Triggered by CS call
Abbreviated Name
highSignalSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the SRB on DCH can use high
speed signaling before the CS RB setup is completed when a UE in
CELL_FACH or CELL_PCH state initiates or receives a CS call.
Instance
RNC
ZWF21-05-026
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates that, when a UE is in
the CELL_FACH or CELL_PCH state, if it initiates or receives a CS

call, whether the SRB on the DCH can use high-speed signaling
before the CS RB setup is completed.
Related factor: CS call setup delay and success rate, PS service
user experience.
To have good KPIs of CS calls, the switch should be enabled.
To have good PS service user experience, the switch should be
disabled.
The default value is set to "0: Off". If the delay in CS call setup
Reason
is too long or the success rate of CS call setup is too low, it can
be set to "1: On".
2-523
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.98 Start Time for Switch Off Carrier for InterRAT Energy Saving
Full Name
Start Time for Switch Off Carrier for InterRAT Energy Saving
Abbreviated Name
tStartIntRatEngSav
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the start time of carrier shutdown for

inter-RAT energy saving. When the time reaches this value,
the RNC starts to determine whether the inter-RAT carrier
shutdown conditions are satisfied. If yes, the carrier is shut down.
TIME_STRUCT_LENGTH_OF_CLOSE_FREQ = 3 (three elements:
hour, minute, and second).
Instance
RNC
N/A
N/A
hour tStartIntRatEngSavF[0] (0..23), step: 1

min tStartIntRatEngSav[1] (0..59), step: 1
sec tStartIntRatEngSav[2] (0..59), step: 1
Unit
hour:min:sec
Default Value
[22 0 0] (The time is 22: 00: 00)
Related Parameters
N/A
2-524
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Function: Start Time for Switch Off carrier for InterRAT Energy
Saving
consideration factorsnetwork planning and optimization
parameters. This parameter can be configured according to the
actual conditions. A carrier can be closed usually when the traffic
of a cell is relatively low.
The default value is set based on network planning (at a low-traffic
Reason
time generally, for example, 10 p.m. to 7 a.m.).
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.99 End Time for Switch Off Carrier for InterRAT Energy Saving
Full Name
End Time for Switch Off Carrier for InterRAT Energy Saving
Abbreviated Name
tEndIntRatEngSav
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-525
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the end time of carrier shutdown for

inter-RAT energy saving. When the time reaches this value, the
RNC does not determine whether to shut down the carrier or not.
TIME_STRUCT_LENGTH_OF_CLOSE_FREQ = 3 (three elements:
hour, minute, and second).
Instance
RNC
N/A
N/A
hour tEndIntRatEngSav[0] (0..23), step: 1

min tEndIntRatEngSav[1] (0..59), step: 1
sec tEndIntRatEngSav[2] (0..59), step: 1
Unit
hour:min:sec
Default Value
[7 0 0] (The time is 7: 00: 00)
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Function: End Time for Switch Off carrier for InterRAT Energy Saving
consideration factorsnetwork planning and optimization

parameters.
This parameter can be configured according to the actual conditions.
A carrier can be opened when the traffic of a cell is relatively high.
Reason
time generally, for example, 10 p.m. to 7 a.m.).
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-526
SJ-20141209142030-013|2015-11-12 (R1.3)
Add
2.2.100 switch off Priority Indicator for UTRAN and LTE for
InterRAT Energy Saving
Full Name
switch off Priority Indicator for UTRAN and LTE for InterRAT Energy
Saving
Abbreviated Name
ulIntRATSavPrioInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the priority of UTRAN and LTE shutdown

for inter-RAT energy saving.
Instance
RNC
N/A
N/A
0: Lte prior to UTRAN switch off

1: UTRAN prior to LTE switch off
Unit
NA
Default Value
0:Lte prior to UTRAN switch off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function:Switch Off Priority Indicator for UTRAN and LTE
for InterRAT Energy Saving

Related factors: network coverage situation.
Generally, the UTRAN system provides a wider coverage than the
LTE systemthus the LTE carriers can be closed first.
2-527
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on network coverage.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.101 Switch of URA_PCH/CELL_PCH for R5 UE

Full Name
Switch of URA_PCH/CELL_PCH for R5 UE
Abbreviated Name
r5UePchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not an R5 UE is allowed to

switch to the URA_PCH/CELL_PCH state.
Instance
RNC
ZWF21-04-004
0: Not Allowed
1: Allowed
Unit
NA
Default Value
0: Not Allowed
Related Parameters
N/A
N/A
Parameters
2-528
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether an R5 UE is
allowed to transit to the URA_PCH/CELL_PCH state.

Related factor: R5 UE PCH compatibility.
If the system supports UE transition to the URA_PCH/CELL_PCH
state, if an R5 UE have no compatibility problems, it is suggested to
allow the R5 UE to transit to the PCH state.
The default value is set to "0: Not Allowed". If there is no
Reason
compatibility problem for R5 UEs, the default value can be modified

to "1: Allowed".
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.102 Switch for Releasing the Traffic Volume Measurement

Before Transferring to PCH
Full Name
Switch for Releasing the Traffic Volume Measurement Before

Transferring to PCH
Abbreviated Name
relTvmPchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-529
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether or not to release the traffic volume

measurement sent to a UE previously before the UE transitions
to the PCH state.
Instance
RNC
ZWF21-04-004
0: Release the traffic volume measurement before switching to PCH

1: Not release the traffic volume measurement before switching
to PCH
Unit
NA
Default Value
0:Release the traffic volume measurement before switching to PCH
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether to release the
traffic measurement issued to the UE previously before transiting

the UE to the PCH state.
Related factor: The UE performance after transiting to the PCH
state.
The default value is set to "0: Release the traffic volume
Reason
measurement before switching to PCH". If the performance is better

without releasing the traffic volume measurement before the UE's
transition to the PCH state, the default value can be modified to "1:
Not release the traffic volume measurement before switching to
PCH".
Change Take Effect
No
How to Impact
N/A
Access
read/write
2-530
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Add
2.2.103 Indicator for the Channel Selection Strategy of UEs

Switching from PCH to Other Channel.
Full Name
Indicator for the Channel Selection Strategy of UEs Switching from

PCH to Other Channel.
Abbreviated Name
chSelFromPchInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the indicator of the channel selection strategy

when a UE switches from a PCH to other channels.
Instance
RNC
ZWF21-04-004
0: Preferred to Cell_DCH
1: Preferred to Cell_FACH
Unit
NA
Default Value
0:Preferred to Cell_DCH
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-531
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter is the indicator for the channel
selection strategy of controlling a UE to transit from the PCH to

another channel.
Related factor: user experience, radio resource utilization.
If the Cell_DCH is preferred, user experience can be guaranteed,
but more resources will be consumed. If the Cell_FACH is preferred,
user experience cannot be guaranteed, but less resources will be
consumed.
The default value is set based on user experience. It can be modified
Reason
to "1: Preferred to Cell_FACH" for less resource consumption.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.04: Add
V4.14.10.09: Modify the upgrading strategy of URncInfo.chSelFromPchInd

Full Name
Abbreviated Name
r6UePchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF21-04-004

2-532
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Allowed
1: Allowed
Unit
NA
Default Value
1: Allowed
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes

state, if an R6 UE has compatibility problems, it is suggested not to
The default value is set to "1: Allowed". If there is a compatibility
Reason
problem for R6 UEs, the default value can be modified to "0: Not
Allowed".
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add

Full Name
2-533
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
r7UePchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF21-04-004
0: Not Allowed
1: Allowed
Unit
NA
Default Value
1: Allowed
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes

state, if an R7 UE has compatibility problems, it is suggested not to
Reason
problem for R7 UEs, the default value can be modified to "0: Not
Allowed".
Change Take Effect
No
How to Impact
N/A
2-534
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
Add
2.2.106 Switch of URA_PCH/CELL_PCH for R8 and Post-R8 UE

Full Name
Switch of URA_PCH/CELL_PCH for R8 and Post-R8 UE
Abbreviated Name
r8UePchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not an R8 and Post-R8 UE are

allowed to switch to the URA_PCH/CELL_PCH state.
Instance
RNC
ZWF21-04-004
0: Not Allowed
1: Allowed
Unit
NA
Default Value
1: Allowed
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-535
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether an R8 and
Post-R8 UE is allowed to transit to the URA_PCH/CELL_PCH state.

Related factor: R8 and Post-R8 UE PCH compatibility.
state, if an R8 and Post-R8 UE has compatibility problems, it is
suggested not to allow the R8 and Post-R8 UE to transit to the
PCH state.
Reason
problem for R8 and Post-R8 UEs, the default value can be modified
to "0: Not Allowed".
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.107 The Target RRC State of Fast Dormancy (R99/R4)

Full Name
The Target RRC State of Fast Dormancy (R99/R4)
Abbreviated Name
r99R4RrcStaDorm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the target RRC state of channel transition

triggered by fast dormancy for R99/R4 UEs.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
2-536
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Prior to URA_PCH/CELL_PCH
1: Prior to CELL_FACH
Unit
NA
Default Value
0:Prior to URA_PCH/CELL_PCH
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the target RRC state
of fast dormancy for R99/R4 UEs.

Related factors: resource consumption, the duration for a UE to
change from the dormancy state to the service state.
If the URA_PCH/CELL_PCH is preferred, less resources are
consumed but the duration for a UE to change from the dormancy
state to the service state is longer. If the CELL_FACH is preferred,
more resources are consumed but the duration for a UE to change
from the dormancy state to the service state is shorter.
The default value is set to reduce resource consumption.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.108 The Target RRC State of Fast Dormancy (R5)

Full Name
The Target RRC State of Fast Dormancy (R5)

2-537
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
r5RrcStaDorm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by fast dormancy for R5 UEs.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
of fast dormancy for R5 UEs.

Reason
Change Take Effect
No
2-538
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add

Full Name
Abbreviated Name
r6RrcStaDorm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-539
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add

Full Name
Abbreviated Name
r7RrcStaDorm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
ZWF21-01-027
Fast Dormancy
2-540
SJ-20141209142030-013|2015-11-12 (R1.3)
Fast Dormancy FG
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes

Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.111 The Target RRC State of Fast Dormancy (R8 and R8 Post)
2-541
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
The Target RRC State of Fast Dormancy (R8 and R8 Post)
Abbreviated Name
r8StaDorm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by fast dormancy for R8 and Post-R8 UEs.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
of fast dormancy for R8 and R8 Post UEs.

Reason
Change Take Effect
No
2-542
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.112 Indicator for Sending the Support Capability of Different

HS-SCCH in Consecutive TTIs to Node B for REL 8 UE
Full Name
Indicator for Sending the Support Capability of Different HS-SCCH

in Consecutive TTIs to Node B for REL 8 UE
Abbreviated Name
r8ScchCapSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not the support capability of

"different HS-SCCH in consecutive TTIs" is sent to a Node B for
R8 UEs.
Instance
RNC
ZWF23-01-A
0: Off
1: On
Unit
NA
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
2-543
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
REL8-version support capability of different HS-SCCH in

consecutive TTIs is sent to the Node B.
If the Node B supports the feature, the RNC sends the capability to
the Node B for scheduling.
The default value is set because NodeBs support the feature by
Reason
default.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add/Modify Default Value
2.2.113 Indicator for Sending the Support Capability of HS-SCCH

Orders in HS-SCCH-less Operation to Node B for R8 and
Post-R8 Ues
Full Name
Indicator for Sending the Support Capability of HS-SCCH Orders in

HS-SCCH-less Operation to Node B for R8 and Post-R8 Ues
Abbreviated Name
r8ScchOrdCapSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

"HS-SCCH orders in HS-SCCH-less operation" is sent to a Node
B for the UEs of REL 8 or later.
2-544
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF26-01-005
0: Off
1: On
Unit
NA
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
REL8-version support capability of HS-SCCH orders in

HS-SCCH-less operation is sent to the Node B.
Reason
default.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-545
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.114 Indicator for Sending the Support Capability of Different

HS-SCCH in Consecutive TTIs to Node B for R9 and Post-R9
UE
Full Name
Indicator for Sending the Support Capability of Different HS-SCCH

in Consecutive TTIs to Node B for R9 and Post-R9 UE
Abbreviated Name
r9ScchCapSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

"different HS-SCCH in consecutive TTIs" is sent to a Node B for R9
and Post-R9 UEs.
Instance
RNC
ZWF23-01-A
0: Off
1: On
Unit
NA
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
R9-and-Post-R9-version support capability of different HS-SCCH in

consecutive TTIs is sent to the Node B.
Reason
default.
2-546
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2.2.115 Switch of Filling Frequency and Scrambling Code in Uu

Message when Entering URA-PCH
Full Name
Switch of Filling Frequency and Scrambling Code in Uu Message

when Entering URA-PCH
Abbreviated Name
uuFreqScUraPchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not the RNC fills in the

frequency and scrambling code in a Uu message when a UE
transitions to the URA-PCH.
If this parameter is set to "1: On", the RNC fills in the frequency
and scrambling code.
If this parameter is set to "0: Off", the RNC does not fill in the
frequency and scrambling code.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
NA
2-547
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets whether to set frequency
and scrambling code information in the Uu message when entering

the URA-PCH state.
Parameter controlling factor: UE compatibility problem.
Value 0 means not setting frequency and scrambling code
information in the Uu message when entering the URA-PCH state.
Value 1 means setting frequency and scrambling code information
in the Uu message when entering the URA-PCH state.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.116 Switch of Supporting Iub "Puncturing Handling in First

Rate Matching Stage" IE
Full Name
Switch of Supporting Iub "Puncturing Handling in First Rate

Matching Stage" IE
Abbreviated Name
iubPh1stRmSwch
2-548
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not the RNC supports the

"Puncturing Handling in First Rate Matching Stage" IE over the Iub
interface.
If this parameter is set to "1: On", the RNC fills in the IE.
If this parameter is set to "0: Off", the RNC does not fill in the IE.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
1:On
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets whether to support the
"Puncturing Handling in First Rate Matching Stage" IE on the Iub

interface.
Related factors: Iub interface compatibility.
Value 0 means that the RNC supports the "Puncturing Handling
in First Rate Matching Stage" IE on the Iub interface. The RNC
will carry the IE of "Puncturing Handling in First Rate Matching
Stage=TRUE" in the Iub message when the RNC cannot get the
UE's HS-DSCH category.
Value 1 means that the RNC does not support the IE on the Iub
interface.
The default value is set to "1: On", which can be modified by the
Reason
Change Take Effect

2-549
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.117 The occasion of send Relocation Detect message to CN

in soft handover relocation
Full Name
The occasion of send Relocation Detect message to CN in soft

handover relocation
Abbreviated Name
sendDetetOcca
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time when the DRNC sends

a Relocation Detect message to the CN during a soft
handover relocation procedure. When the DRNC receives a
UtranMobilityInformationConfirm message from a UE, it sends
a Relocation Detect message to the CN; or when the DRNC
receives a Relocation Commit message from the SRNC, it sends a
Relocation Detect message to the CN.
Instance
RNC
N/A
N/A
N/A
0: When DRNC received UtranMobilityInformationConfirm message

from UE, then send Relocation Detect message to CN;
1: When DRNC received Relocation Commit message from SRNC,
then send Relocation Detect message to CN.
2-550
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
NA
Default Value
0: when DRNC received UtranMobilityInformationConfirm message

from UE, then send Relocation Detect message to CN;
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter sets at what moment a Relocation Detect message
should be sent to the CN in the soft handover relocation procedure.

Sending a Relocation Detect message before receiving a UMI
Confirm Message can relieve the packet loss problem.
The default value is set because packet loss is not serious in most
Reason
cases during a soft handover and relocation procedure of a UE.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.118 The switch for Uu measurement of measurement identity 11

Full Name
The switch for Uu measurement of measurement identity 11
Abbreviated Name
startMeasId11Sw
Managed Object

3GPP Name
N/A
2-551
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the global control switch to determine

whether or not to start Uu measurement for measurement identity 11.
Instance
RNC
N/A
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
If you need to measure the detecting set, start the measurement
of Uu ID11.
The default value is set because starting ID11 Uu measurement
Reason
may increase the processing load of the Uu interface.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-552
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.119 SRB DCH FP Payload CRC Indication

Full Name
SRB DCH FP Payload CRC Indication
Abbreviated Name
srbDchCrcInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not to make a payload CRC

check on the DCH FP frames carried on the SRB.
Instance
RNC
N/A
N/A
N/A
0: CRC Included; 1: CRC not included
Unit
NA
Default Value
0CRC Included
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
In most cases, the RNC requires a payload CRC check of FP frames
to confirm the transmission link quality. If the CPU load of the RNLU
processing board is heavy, the RNC may not perform the payload
CRC check of FP frames to reduce the CPU load.
The default value is set to detect the quality of a transmission link.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
2-553
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
Add
2.2.120 CS DCH FP Payload CRC Indication

Full Name
CS DCH FP Payload CRC Indication
Abbreviated Name
csDchCrcInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

check on the DCH FP frames carried by CS services.
Instance
RNC
N/A
N/A
N/A
Unit
NA
Default Value
0CRC Included
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-554
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.121 PS DCH FP Payload CRC Indication

Full Name
PS DCH FP Payload CRC Indication
Abbreviated Name
psDchCrcInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

check on the DCH FP frames carried by PS services.
Instance
RNC
N/A
N/A
N/A
Unit
NA
Default Value
0CRC Included
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
2-555
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.122 SRB EDCH FP Payload CRC Indication

Full Name
SRB EDCH FP Payload CRC Indication
Abbreviated Name
srbEDchCrcInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

check on the EDCH FP frames carried on the SRB.
Instance
RNC
N/A
N/A
N/A
2-556
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
NA
Default Value
0CRC Included
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.123 CS EDCH FP Payload CRC Indication

Full Name
CS EDCH FP Payload CRC Indication
Abbreviated Name
csEDchCrcInd
Managed Object

3GPP Name
N/A
2-557
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description

check on the EDCH FP frames carried by CS services.
Instance
RNC
N/A
N/A
N/A
Unit
NA
Default Value
0CRC Included
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-558
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.124 PS EDCH FP Payload CRC Indication

Full Name
PS EDCH FP Payload CRC Indication
Abbreviated Name
psEDchCrcInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

check on the EDCH FP frames carried by PS services.
Instance
RNC
N/A
N/A
N/A
Unit
NA
Default Value
0CRC Included
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
2-559
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
Add
2.2.125 Switch to Control Whether RNC Releases the UE and

Redirects it to GSM Network After the UE Setup RAB Fail.
Full Name
Switch to Control Whether RNC Releases the UE and Redirects it to

GSM Network After the UE Setup RAB Fail.
Abbreviated Name
rediToGsmRabFailSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not the RNC releases a UE

and redirects it to GSM neighbor cells after the UE fails to set up
a RAB procedure.
Instance
RNC
N/A
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-560
SJ-20141209142030-013|2015-11-12 (R1.3)
the parameter function: controls whether RNC releases the UE and
redirects it to GSM neighbor cells after the UE setup RAB fail.

Parameter controlling factor: If some specail UE setup RAB fail
repeatly in 3G network, the function may be OPEN and redirects
the UE to
GSM network to try to setup RAB.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.126 Switch of Whether Report Error Information of Node B to

CT and CDT
Full Name
Switch of Whether Report Error Information of Node B to CT and

CDT
Abbreviated Name
nodebErrInfoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not the RNC reports error

information of a NodeB to the associated CT and CDT.
Instance
RNC
N/A
N/A
N/A
2-561
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
NA
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter function: switch of report error information of Nodeb
to CDT and CT.

Parameter controlling factor: whether the CT\CDT needs the error
information of Nodeb.
Value FALSE: RNC doesn't report error information of Nodeb to
CDT and CT.
Value TRUE: RNC report error information of Nodeb to CDT and CT.
The default value is normal choice.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.127 Switch of Whether the UE receives the Active Set Update

Message by RLC ACK of the Message.
2-562
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Switch of Whether the UE receives the Active Set Update Message

by RLC ACK of the Message.
Abbreviated Name
aSUByRlcAckSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not a UE receives an Active Set

Update message through an RLC ACK in the active set.
During an update procedure of the active set, if the user plane
receives an RLC ACK of an Active Set Update message, the RNC
regards that the Active Set Update procedure is successful after the
timer waiting for the Active Set Update Complete message expires.
Instance
RNC
ZWF21-03-050
0: Off
1: On
Unit
NA
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Main function: the switch of whether the UE receives the Active Set
Update message by RLC ACK of the message.

0---close the function.
1--open the function.
Influence factor: whether the function is need.
Reason
2-563
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.128 Mode of Intra-Frequency Hard Handover

Full Name
Mode of Intra-Frequency Hard Handover
Abbreviated Name
modeOfIntraHardHO
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the mode of intra-frequency hard handover.

0: Timing re-initialized
1: Timing re-maintained
Instance
RNC
Handover Control FG
ZWF21-03-002
0: Timing re-initialised
1: Timing-maintained
Unit
NA
Default Value
0:Timing re-initialised
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
2-564
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function of the parameter: controls the synchronization mode of

Parameter controlling factor: This parameter is set according to
experience.
The default value is 0 (Timing re-initialised).
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.129 Switch of the PS suppression function of CSFB

Full Name
Switch of the PS suppression function of CSFB
Abbreviated Name
csfbPsSuppSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the PS suppression function

during a CSFB procedure.
0: PS suppression is disabled.
1: PS suppression is enabled.
Instance
RNC

2-565
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-101
0: Off
1: On
Unit
NA
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: control whether open the PS suppression function during
CSFB.
Configuration Rule: If the during time of CSFB is to be shorten,
then the function can be open.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.130 Mode of the PS suppression function of CSFB

Full Name
Mode of the PS suppression function of CSFB
Abbreviated Name
csfbModeOfPsSupp
2-566
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the mode of PS suppression during a

CSFB procedure.
0: SCRI
1: Discard
Instance
RNC
N/A
N/A
N/A
0: SCRI;
1: disard.
Unit
NA
Default Value
0: SCRI
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter function: controls the mode of PS suppression
function during CSFB.

Parameter controlling factor:
0: When RNC receive message of PS domain in Uu interface, RNC
will save.
1: When RNC receive message of PS domain in Uu interface, RNC
will disard the message.
Reason
Change Take Effect
New Connection
No
2-567
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.131 Switch for handling sscop congestion

Full Name
Switch for handling sscop congestion
Abbreviated Name
sscopCgtSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates switch for continue RRC Requset

procedure from the NodeB when sscop link congestion happened.
Instance
RNC
ZWF21-04-001
Admission Control
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-568
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter sets whether the RRC Request
process from the Node B is handled when the SSCOP link is

congested.
Related factors: RRC success rate, system security.
Configuration rule:
If the parameter is set to 0, the SSCOP link congestion will worsen,
and the RRC success rate will increase.
If the parameter is set to 1, the SSCOP link congestion will be
relieved, and the RRC success rate will decrease.
If there are some sites suffering from serious SSCOP bandwidth
congestions, this parameter is set to 1; otherwise, this parameter
is set to 0.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.132 Switch for Report PM event to SigTrace

Full Name
Switch for Report PM event to SigTrace
Abbreviated Name
pmEvtTraceSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
when SigTrace is started, the PM event can be report. This

parameter indicate the PM event will be report the SigTrace or not.
Instance
RNC
2-569
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets whether the PM event will
be reported to the signaling tracing system.

Related factors: CPU performance, difficulty in locating problems.
If the parameter is set to 0, the PM event is not reported to the
signaling tracing system, which may decrease the CPU load but
increase the difficulty in locating problems.
If the parameter is set to 1, the PM event is reported to the signaling
tracing system, which may increase the CPU load but decrease
the difficulty in locating problems.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-570
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.133 Switch for Rel-9(onwards) handling of DL secondary

HS-DSCH (de)activation state Support Indicator
Full Name
Switch for Rel-9(onwards) handling of DL secondary HS-DSCH

(de)activation state Support Indicator
Abbreviated Name
r9UeSndCelDctvSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to support the activation and

deactivation of DL secondary HS-DSCH for the UEs of Rel-9 and
later. If this parameter is set to "1: On", the RNC sends a support
indicator to a NodeB to allow the NodeB to activate or deactivate DL
secondary HS-DSCH for the UEs of Rel-9 and later; otherwise, the
RNC does not send the indicator to the NodeB and the NodeB does
not active or deactivate DL secondary HS-DSCH for these UEs.
Instance
RNC
ZWF26-02-004
DC-HSDPA
DC-HSDPA FG
0: Off
1: On
Unit
NA
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is used for UE compatibility. If there are some UEs
not compatible with this feature, this parameter is set to "0:Off";

otherwise, this parameter is set to "1:On".
2-571
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set because NodeBs support the feature and
Reason
there is no compatibility problem for UEs by default.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2.2.134 Absolute Directed Retry Switch

Full Name
Absolute Directed Retry Switch
Abbreviated Name
absDirectRetrySw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the absolute directed retry

function.
0: Absolute directed retry is disabled.
1: Absolute directed retry is enabled.
Instance
RNC
ZWF21-05-021
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
2-572
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets whether to use the function
of Absolute Directed Retry (not open to the public).

Related factor: whether the function is enabled or not. (this function
is enabled only for Cuba.)
0: the function is disabled.
1: the function is enabled.
The default value is 0.
This parameter is enabled when needed.
This is a new function and the default value is set to "0: Off".
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.135 UE LTE Capability Judgement Switch

Full Name
UE LTE Capability Judgement Switch
Abbreviated Name
ueLteCapJugSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-573
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter enables or disables UE capability determination

when the capability of the UE is not obtained.
0: The UE does not support the LTE capability.
1: If the "CSFB Information" IE is contained in a Relocation Request
message, the capability of the UE is considered as "Support of
E-UTRA FDD/TDD".
Instance
RNC
ZWF21-03-111
Fast Return to LTE
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the switch of identifying the
capability of a UE when the UE capability is not acquired.

Related factor: For a UE that performs handover from the LTE
system to the UTRAN system due to CSFB, if the function of fast
return to LTE is required for the UE even if the UE capability is not
acquired, this switch can be enabled.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
2-574
SJ-20141209142030-013|2015-11-12 (R1.3)
Modify the English GUI Name and Logical name
2.2.136 Inter-band Balance Switch in RRC Stage

Full Name
Inter-band Balance Switch in RRC Stage
Abbreviated Name
rrcInterBandBlaSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables inter-band (from the operating

frequency band to U2100) inter-frequency balancing during an initial
RRC procedure.
0: Inter-band balancing is disabled.
1: Inter-band balancing to the inter-frequency adjacent cell in the
band U2100 is enabled.
Instance
RNC
ZWF21-04-011
ZWF21-04-022
Load Balancing
Frequency Priority
Load Balance FG
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-575
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter sets whether inter-band (from
the operating frequency band to U2100) inter-frequency balancing is

permitted in the initial RRC stage.
Because U2100 is the default supported frequency band in the
UMTS, it is recommended that the function is enabled in most
cases, in other words, inter-band (from the operating frequency
band to U2100) inter-frequency balancing is allowed, which makes
a better load and service distribution in the initial RRC stage.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.137 Maximum Intra-Frequency Neighboring Pico Cells Number

of Macro Cell
Full Name
Maximum Intra-Frequency Neighboring Pico Cells Number of Macro

Cell
Abbreviated Name
maxIntraPicNbrNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of intra-frequency

neighboring pico cells that can be configured for a macro cell.
Instance
CELL
N/A
2-576
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Small Cell Package
0..32
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: maximum number of intra-frequency
neighboring pico cells that can be configured for a macro cell

Related factors: handover performance between macro-macro cells
and handover performance between macro-pico cells
Configuration rule: A larger parameter value indicates the greater
number of pico neighboring cells that can be configured for macro
cells, higher success rate of macro-pico cell handover, and lower
success rate of macro-macro cell handover. A smaller parameter
value indicates the smaller number of pico neighboring cells that can
be configured for macro cells, higher success rate of macro-macro
cell handover, and lower success rate of macro-pico cell handover.
The default value is set based on the handover performance.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2-577
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.138 Maximum Inter-Frequency Neighboring Pico Cells Number

of Macro Cell
Full Name
Maximum Inter-Frequency Neighboring Pico Cells Number of Macro

Cell
Abbreviated Name
maxInterPicNbrNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of inter-frequency

neighboring pico cells that can be configured for a macro cell.
Instance
CELL
N/A
N/A
Small Cell Package
0..32
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: maximum number of inter-frequency
neighboring pico cells that can be configured for a macro cell

Related factors: handover performance between macro-macro cells
and handover performance between macro-pico cells
Configuration rule: A larger parameter value indicates the greater
number of pico neighboring cells that can be configured for macro
cells, higher success rate of macro-pico cell handover, and lower
success rate of macro-macro cell handover. A smaller parameter
value indicates the smaller number of pico neighboring cells that can
be configured for macro cells, higher success rate of macro-macro
cell handover, and lower success rate of macro-pico cell handover.
2-578
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on the handover performance.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.2.139 Ho Report of Son Transfer Request Number Threshold in

one second
Full Name
Ho Report of Son Transfer Request Number Threshold in one

second
Abbreviated Name
sonTraHoReThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of Ho Report messages per

second that initiate a query of load information of inter-RAT cells.
Instance
RNC
N/A
N/A
N/A
1..30
Unit
N/A
Default Value
10
2-579
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: used for flow control
Related factors: load of the ROMP board

Adjustment suggestion: If the value is too large, the load of the
ROMP board increases sharply. If the value is too small, the RNC
cannot send the Ho Report messages to the LTE system in time.
The default value is set based on the maximum board processing
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.140 Switch for Inter Frequency MRO

Full Name
Switch for Inter Frequency MRO
Abbreviated Name
interFreqMroSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-580
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter enables or disables inter-frequency MRO. If this

parameter is set to "1: True", the events used for inter-frequency
MRO are output to CDT files.
Instance
RNC
N/A
N/A
N/A
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Related factors: Whether or not the inter-frequency MRO function
is enabled and whether or not URncFunction.IntRatHoMth is set to

"0: Periodical Method".
If this function is enabled, the parameters used for inter-frequency
handover can be optimized automatically. In this case,
the CPU usage of the RNC may be high. In addition,
URncFunction.IntRatHoMth should be set to "0: Periodical Method".
This parameter is set based on the operator's requirements.
This parameter is a new functional switch and the default value is
Reason
set to "0: Off".
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
2-581
SJ-20141209142030-013|2015-11-12 (R1.3)
Add
2.2.141 Switch for Inter RAT MRO with GSM

Full Name
Switch for Inter RAT MRO with GSM
Abbreviated Name
interRatGSMMroSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables inter-RAT MRO of GSM

systems. If this parameter is set to "1: True", the events used for
inter-RAT MRO of GSM systems are output to CDT files.
Instance
RNC
N/A
N/A
N/A
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-582
SJ-20141209142030-013|2015-11-12 (R1.3)
Related factors: Whether or not the inter-RAT MRO (GSM) function
is enabled and whether or not URncFunction.IntRatHoMth is set to

"0: Periodical Method".
If this function is enabled, the parameters used for inter-RAT
handover to EUTRAN can be optimized automatically. In this
case, the CPU usage of the RNC may be high. In addition,
Reason
set to "0: Off".
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.142 Switch for Inter RAT MRO with EUTRAN

Full Name
Switch for Inter RAT MRO with EUTRAN
Abbreviated Name
interRatEutraMroSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables inter-RAT MRO of EUTRAN

systems. If this parameter is set to "1: True", the events used for
inter-RAT MRO of GSM systems are output to CDT files.
Instance
RNC
N/A
N/A
2-583
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Related factors: Whether or not the inter-RAT MRO (EUTRAN)
function is enabled and whether or not URncFunction.IntRatHoMth

is set to "0: Periodical Method".
If this function is enabled, the parameters used for inter-RAT
handover to EUTRAN can be optimized automatically. In this
case, the CPU usage of the RNC may be high. In addition,
Reason
set to "0: Off".
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-584
SJ-20141209142030-013|2015-11-12 (R1.3)
2.2.143 Indicate Whether Cell Update Message Triggered by SRB

with the cause of "RLC unrecoverable error" is Counted in
MRO
Full Name
Indicate Whether Cell Update Message Triggered by SRB with the

cause of "RLC unrecoverable error" is Counted in MRO
Abbreviated Name
mroRlcErrorUsedInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not a Cell Update message

triggered by an SRB with the cause of "RLC unrecoverable error" is
counted in the inter-frequency MRO algorithm.
Instance
RNC
N/A
N/A
N/A
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-585
SJ-20141209142030-013|2015-11-12 (R1.3)
Related factors: Whether or not the inter-frequency MRO function is
enabled and whether or not a Cell Update message triggered by the

SRB with the cause of "RLC unrecoverable error" is involved in the
inter-frequency MRO function.
If the inter-frequency MRO function is disabled, this parameter
is invalid. If the inter-frequency MRO function is enabled, this
parameter determines whether or not a Cell Update message
triggered by the SRB with the cause of "RLC unrecoverable error" is
involved in the inter-frequency MRO function.
It is recommended that this parameter be set to "1: True" to facilitate
the triggering of inter-frequency MRO events.
This parameter is invalid if the inter-frequency MRO function is
Reason
disabled. The default value is set to make inter-frequency MRO

events can be triggered easily if the inter-frequency MRO function
is enabled.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.144 Reporting Interval for MRO Strategy from LTE to UMTS

Based on RIM
Full Name
Reporting Interval for MRO Strategy from LTE to UMTS Based on

RIM
Abbreviated Name
prdRptIntvl4MRO
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-586
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the reporting interval of periodic reporting

criteria for the MRO strategy from LTE to UMTS based on RIM.
Instance
RNC
N/A
N/A
N/A
(250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000,
20000, 24000, 28000, 32000, 64000) ms
Unit
ms
Default Value
2000
Related Parameters
URncInfo.meaTim4L2UMRO
URncInfo.prdRptIntvl4MRO < URncInfo.meaTim4L2UMRO 1000
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: reporting interval of periodic reporting criteria
for the MRO strategy from LTE to UMTS based on RIM

Related factors: radio resources of the Uu interface and the
effectiveness of the function
During the LTE measurement for the MRO from LTE to UMTS based
on RIM, the first measurement report is the most important. If the
parameter value is too small, the UE does not report the cell quality
or only reports the quality of few cells because there is no enough
time for measurement. In this case, the result may be incorrect or
incomplete and parameter optimization may be affected in the LTE
system. In addition, more radio resources may be consumed over
the Uu interface due to shorter reporting interval.
If the parameter value is too large, the cell quality cannot be fed
back in time due to long reporting interval. In this case, the following
requirement of information feedback through a RIM process cannot
be met: "the cell quality is always better than a certain level".
The default value is set based on the resource utilization and the
Reason
effectiveness of the function.
Change Take Effect
No
2-587
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.145 Measurement Timer for MRO Strategy from LTE to UMTS

Based on RIM
Full Name
Measurement Timer for MRO Strategy from LTE to UMTS Based

on RIM
Abbreviated Name
meaTim4L2UMRO
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum LTE inter-RAT measurement

time for the MRO from LTE to UMTS allowed by the UMTS system.
When this timer expires, the LTE inter-RAT measurement based on
the MRO from LTE to UMTS is stopped immediately.
Instance
RNC
N/A
N/A
N/A
(1..255) s, step: 1 s
Unit
Default Value
10
Related Parameters
URncInfo.prdRptIntvl4MRO
URncInfo.prdRptIntvl4MRO < URncInfo.meaTim4L2UMRO 1000
Parameters
Data Type
BYTE
Parameter Type
2-588
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: maximum LTE inter-RAT measurement time for
the MRO from LTE to UMTS allowed by the UMTS system

Related factors: cell throughput and the effectiveness of the function
A smaller value indicates a shorter measurement time. In this case,
the result and feedback information may be inaccurate.
A larger value indicates a longer activation time of the compressed
mode and lower cell throughput.
The default value is set based on cell throughput and the
Reason
effectiveness of the function.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.2.146 The switch of controlling whether adopt GPS location for

UE which only support StandAlone location method
Full Name
The switch of controlling whether adopt GPS location for UE which

only support StandAlone location method
Abbreviated Name
saUEGPSlcSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-589
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is used to decide whether adopt GPS location

method for the UE which does not support UEB AGPS location
method but supports "Standalone" location method.
0:not adopt GPS location method; 1:adopt GPS location
method.performed.
Instance
RNC
ZWF21-10-002
LCS with A-GPS
ZTE UMTS Location Service with AGPS

FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
FunctionThis parameter is used to decide whether adopt GPS
location method for the UE which does not support UEB AGPS
location method but supports "Standalone" location method.
Configuration ruleAdoption GPS location can improve location
accuracy for those UEs with only "Standalone" location capability.
However few types of UEs with only "Standalone" capability have
incompatibility problem when GPS location was adopted. So deafult
value "0" is recommendated. If you intend enabling this function,
IMEI blacklist function could be used meanwhile when you find
incompatibility problem.
Default value 0in order to avoid incompatibility problem on few
Reason
type of Ues
Change Take Effect
New Connection
No
How to Impact
N/A
2-590
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
Add
2.2.147 Switch of Whether the UE receives the Active Set Update

Message by RLC ACK of the Message
Full Name
Switch of Whether the UE receives the Active Set Update Message

by RLC ACK of the Message.
Abbreviated Name
aSUByRlcAckSw
Managed Object
URncInfo
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a UE receives an Active Set

Update message through the RLC ACK message of the message in
the active set.
0: Disabled,
1: Enabled.
During an update procedure of the active set, if the user plane
receives an RLC ACK message of an Active Set Update message,
the RNC determines that the Active Set Update procedure is
successful after the timer of waiting for the Active Set Update
Complete message expires.
Instance
RNC
ZWF21-03-050
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
2-591
SJ-20141209142030-013|2015-11-12 (R1.3)

N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
Yes
Main function: the switch of whether the UE receives the Active Set
Update message by RLC ACK of the message.

0---close the function.
1--open the function.
Influence factor: whether the function is need.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.04
Add
2.2.148 Mode of Intra-Frequency Hard Handover

Full Name
Mode of Intra-Frequency Hard Handover
Abbreviated Name
modeOfIntraHardHO
Managed Object
URncInfo
3GPP Name
N/A
3GPP Reference
N/A
2-592
SJ-20141209142030-013|2015-11-12 (R1.3)

Description
This parameter indicates the synchronization mode for an

0: Timing re-initialized,
1: Timing re-maintained.
Instance
RNC
ZWF21-03-002
Handover Control FG
1: Timing-maintained
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
Yes
Function of the parameter: controls the synchronization mode of

Parameter controlling factor: This parameter is set according to
experience.
The default value is 0 (Timing re-initialised).
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.04
2-593
SJ-20141209142030-013|2015-11-12 (R1.3)

Add
2.2.149 Switch of the PS suppression function of CSFB

Full Name
Switch of the PS suppression function of CSFB
Abbreviated Name
csfbPsSuppSw
Managed Object
URncInfo
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable the PS suppression

function during CSFB.
0: Disabled,
1: Enabled.
Instance
RNC
ZWF21-03-101
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
Yes
Function: control whether open the PS suppression function during
CSFB.
Configuration Rule: If the during time of CSFB is to be shorten,
then the function can be open.
2-594
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.04
Add

Full Name
Load Filter Coefficient
Abbreviated Name
loadFilterCoeff
Managed Object
URncInfo
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the load filter coefficient, used in the

filtering of the uplink RoT and downlink effective load.
F (n) = (1-a) * F (n-1) + a * M (n)
Where:
F (n) is the updated filtered measurement result.
F (n-1) is the last filtered measurement result.
M (n) is the new load measurement result received.
Instance
RNC
ZWF21-04-013
ZWF25-01-033

Adaptive HSUPA TTI
2-595
SJ-20141209142030-013|2015-11-12 (R1.3)


0..1, step: 0.01
Unit
N/A
Default Value
12:00:00
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
No
Parameter function: This parameter indicates the load filter
coefficient, used in the filtering of the uplink RoT and downlink

effective load.
The larger the setting, the greater effect on the load filter result
The smaller the setting, the less effect on the load filter result
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.13.10.13
Modify
2-596
SJ-20141209142030-013|2015-11-12 (R1.3)
2.3 Cpu Load Control Priority based on Qos

(UCpuCtrlPri)
2.3.1 Cpu Load Control Priority based on Qos Object ID
Full Name
Cpu Load Control Priority based on Qos Object ID
Abbreviated Name
UCpuCtrlPriId
Managed Object
Cpu Load Control Priority based on Qos (UCpuCtrlPri)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the CPU load control

priority based on QoS.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-597
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Cpu Load Control Priority based
on Qos
N/A
N/A
2.3.2 Service Type of CPU load control

Full Name
Service Type of CPU load control
Abbreviated Name
serviceType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the service type of the QoS-based

overload control.
Instance
RNC
N/A
N/A
0: RRC, register
1: RRC, CS
2: RRC, normal
3: RRC, emergency call
4: CS and PS voice, include VOIP, QCHAT
5: PS S
6: PS I/B
7: reserved
Unit
N/A
Default Value
CpuCtrlPri
Related Parameters
N/A
2-598
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the service type of
the QoS-based overload control.

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
on Qos
N/A
N/A
2.3.3 Event Type of CPU load control

Full Name
Event Type of CPU load control
Abbreviated Name
eventType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the event type of the QoS-based overload

control.
Instance
RNC
2-599
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
0: RRC CONN REQ

1: Iur RL SETUP, RELCOATION REQUEST;
2: DRBC;
3: intra-freq report;
4: inter-freq report;
5: inter-sys report;
6: reserved 1;
7: reserved 2
Unit
N/A
Default Value
CpuCtrlPri
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the event type of the
QoS-based overload control.

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
on Qos
N/A
N/A
2-600
SJ-20141209142030-013|2015-11-12 (R1.3)
2.3.4 Cpu Load Ctrl Priority

Full Name
Cpu Load Ctrl Priority
Abbreviated Name
cpuLdCtrlPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the priority of the QoS-based overload

control.
Instance
RNC
N/A
N/A
0: low Priority
1: high Priority
2: URGENT;
Unit
N/A
Default Value
CpuCtrlPri
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the priority of the
QoS-based overload control.

Reason
Change Take Effect
No
2-601
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
on Qos
N/A
N/A
2.4 Pico Son Configuration(UPicoSonMeasCfg)

2.4.1 Pico Son Configuration Object ID
Full Name
Pico Son Configuration Object ID
Abbreviated Name
UPicoSonMeasCfgId
Managed Object
Pico Son Configuration(UPicoSonMeasCfg)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the Pico Son configuration.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-602
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Pico Son Configuration
N/A
N/A
2.4.2 Pico Measurement Report Trigger Criteria

Full Name
Pico Measurement Report Trigger Criteria
Abbreviated Name
picoMeaRptCriteria
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the mode in which the RNC triggers the
Pico cell to perform measurement, periodical triggering or fixed time
triggering.
Instance
RNC
N/A
N/A
0: Periodical triggering
1: fixed time triggering
Unit
N/A
Default Value
2-603
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the mode in which
the RNC triggers the Pico cell to perform measurement, periodical

triggering or fixed time triggering.
The default setting is "0: Periodical triggering", which can obtain
Reason
information about neighboring cells in time and facilitate the

optimization of the PSC and neighboring cells.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.4.3 Intra Measurement Interval

Full Name
Intra Measurement Interval
Abbreviated Name
picoIntraRptPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the intra-frequency measurement interval

(in hours) when periodical triggering mode is used.
2-604
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
(0.5..96)hours, step 0.5hour
Unit
hour
Default Value
8hour
Related Parameters
PicoMeaRptCriteria
This parameter is valid only if the PicoMeaRptCriteria parameter is
Parameters
set to "0: Periodical triggering".
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the intra-frequency
measurement interval (in hours) when periodical triggering mode

is used.
Configuration rule: accuracy of the SON algorithm and user
experiences (the measurement may cause calls to drop). If the
setting is too large, the accuracy of the SON algorithm may be
affected. If the setting is too small, user experiences may be
affected.
The default setting is based on the accuracy of the SON algorithm
Reason
and the user experience.
Change Take Effect
Yes
How to Impact
measurement needs to close RF, this may causes call drop when
Access
Read/Write
OMC Access path
N/A
N/A
2-605
SJ-20141209142030-013|2015-11-12 (R1.3)
2.4.4 Inter Measurement Interval

Full Name
Inter Measurement Interval
Abbreviated Name
picoInterRptPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the inter-frequency measurement interval

Instance
RNC
N/A
N/A
Unit
hour
Default Value
4hour
Related Parameters
PicoMeaRptCriteria
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the inter-frequency

is used.
Configuration rule: accuracy of the SON algorithm and user
experiences (the measurement may cause calls to drop). If the
setting is too large, the accuracy of the SON algorithm may be
affected. If the setting is too small, user experiences may be
affected.
Reason
and the user experience.
Change Take Effect
Yes
2-606
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
measurement needs to close RF, this may causes call drop.
Access
Read/Write
OMC Access path
N/A
N/A
2.4.5 GSM Measurement Interval

Full Name
GSM Measurement Interval
Abbreviated Name
picoGsmRptPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the GSM measurement interval (in hours)

when periodically triggering mode is used.
Instance
RNC
N/A
N/A
Unit
hour
Default Value
4hour
Related Parameters
PicoMeaRptCriteria
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-607
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the GSM
measurement interval (in hours) when periodically triggering mode

is used.
Configuration rule: accuracy of the SON algorithm and the pico
performance. If the setting is too large, the accuracy of the SON
algorithm may be affected. If the setting is too small, the pico
performance may be affected.
Reason
and the pico cell performance.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.4.6 The First Fixed Time Point to Trigger Measurement

Full Name
The First Fixed Time Point to Trigger Measurement
Abbreviated Name
initialTimePoint1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the first fixed time point to

trigger the intra-frequency, inter-frequency, and inter-rat
measurement when fixed time triggering mode is used.
DBS_RR_INITIALTIME_STRUCT_LENGTH_PICOMEAS is set to
3, indicating the time array with three elements of hour, minute and
second.
Instance
RNC
N/A
2-608
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Hour : the first element[0], value range[0, 59]

Minute: the second element[1], value range[0, 59]
Second: the third element[2], value range[0, 59]
Unit
hour: min: sec
Default Value
[1 0 0] (namely 1: 0: 0)
Related Parameters
1, PicoMeaRptCriteria
2, InitTimePointNum
1. This parameter is valid only if the PicoMeaRptCriteria parameter
Parameters
is set to "1: fixed time triggering".

2. The InitTimePointNum parameter determines the validity of
configured time points:
(1) When InitTimePointNum is set to 1, only InitialTimePoint1 is
valid, and InitialTimePoint2 and InitialTimePoint3 are invalid.
(2) When InitTimePointNum is set to 2, only InitialTimePoint1 and
InitialTimePoint2 are valid, and InitialTimePoint3 is invalid.
(3) When InitTimePointNum is set to 3, InitialTimePoint1,
InitialTimePoint2, and InitialTimePoint3 are valid.
3. The first element (hour) ranges between 0 and 23. If the setting
is larger than 23, a message appears, indicating that the setting is
invalid.
Data Type
long[DBS_RR_INITIALTIME_STRUCT_LENGTH_PICOMEAS]
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the first fixed time
point to trigger the intra-frequency, inter-frequency, and inter-rat

Configuration rule: set it based on the network planning. Generally,
the number of online users is least at 1 AM.
The default setting is based on the network planning (generally,
Reason
1 AM).
Change Take Effect
Yes
How to Impact
2-609
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.4.7 The Second Fixed Time Point to Trigger Measurement

Full Name
The Second Fixed Time Point to Trigger Measurement
Abbreviated Name
initialTimePoint2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the second fixed time point to

second.
Instance
RNC
N/A
N/A

Unit
hour: min: sec
Default Value
[11 0 0] (namely 11: 0: 0)
Related Parameters
2, InitTimePointNum
2-610
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

invalid.
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the second fixed time

the number of online users is less at 11 AM.
Reason
11 AM).
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.4.8 The third Fixed Time Point to Trigger Measurement

2-611
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
The third Fixed Time Point to Trigger Measurement
Abbreviated Name
initialTimePoint3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the third fixed time point to

second.
Instance
RNC
N/A
N/A

Unit
hour: min: sec
Default Value
[16 0 0](namely 16: 0: 0)
Related Parameters
2, InitTimePointNum
Parameters

invalid.
Data Type
Parameter Type
Don't Care
2-612
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the third fixed time

the number of online users is less at 4 PM.
Reason
4 PM).
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.4.9 Num of Initial Time Points

Full Name
Num of Initial Time Points
Abbreviated Name
initTimePointNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of time points at which

measurement is triggered when fixed time triggering mode is used.
Instance
RNC
N/A
N/A
2-613
SJ-20141209142030-013|2015-11-12 (R1.3)
1..DBS_RR_MAX_NUM_POINT_INITIALTIME_PICOMEAS
Unit
N/A
Default Value
Related Parameters
PicoMeaRptCriteria
Parameters
set to "1: fixed time triggering".
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the number of time
points at which measurement is triggered.

Configure rule: set it based on the network planning.
The default setting is based on the network planning. At the setting
Reason
time point the network is idlest.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.4.10 Pico Minimum User Number Threshold

Full Name
Pico Minimum User Number Threshold
Abbreviated Name
picoMinUsrNumThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-614
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Pico Minimum User Number Threshold.

In periodic triggering mode, when the number of total users of all
cells of the Pico is less than this parameter, the RNC can trigger
periodic measurement.
Instance
RNC
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
PicoMeaRptCriteria
This parameter is valid only when the PicoMeaRptCriteria parameter
Parameters
is set to "0: Periodical triggering".
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the Pico Minimum User Number
Threshold. In periodic triggering mode, when the number of total

users of all cells of the Pico is less than this parameter, the RNC can
trigger periodic measurement.
Configuration rule: This parameter should be configured based
on the accuracy of the SON algorithm and influence on users. If
the threshold is greater, the SON algorithm is more accurate, and
measurement is triggered earlier. If this parameter is set to a smaller
value, fewer calls are disconnected.
The default value is set based on the accuracy of the SON algorithm
Reason
and influence on users.
Change Take Effect
Yes
How to Impact
bigger threshold more call drop
Access
Read/Write
OMC Access path
2-615
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.5 Relation Adding Configuration(UANR)

2.5.1 Relation Adding Configuration Object ID
Full Name
Relation Adding Configuration Object ID
Abbreviated Name
UANRId
Managed Object
Relation Adding Configuration(UANR)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the neighbor cell addition

configuration.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
2-616
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Relation Adding Configuration
N/A
N/A
2.5.2 Minimum Neighboring Utran Cell's Cpich RSCP Threshold

for Pico Cell
Full Name
Minimum Neighboring Utran Cell's Cpich RSCP Threshold for Pico

Cell
Abbreviated Name
cpichRscpMinThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum CPICH RSCP threshold

when a UTRAN neighboring cell is added. A neighboring cell can
be added only when its measured signal quality is greater than or
equal to this threshold.
Instance
RNC
N/A
N/A
Small Cell Package
(-120..-25) dBm
Unit
dbm
Default Value
-106
Related Parameters
N/A
2-617
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the minimum CPICH
RSCP threshold when a UTRAN neighbor cell is added. A neighbor

cell can be added only when its measured signal quality is not
smaller than the threshold.
Related factor: handover success ratio.
Configuration rule: The larger the value is, the more difficult it is to
add a cell to the neighbor cell list (the handover may fail due to lack
of proper neighbor cells). The smaller the value is, the easier it is
to add a cell with poorer quality to the neighbor cell list, which may
cause the handover to such cells to fail.
The default value is set based on the success rate of handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.5.3 Minimum Neighboring Utran Cell's Cpich EcNo Threshold

for Pico Cell
Full Name
Minimum Neighboring Utran Cell's Cpich EcNo Threshold for Pico

Cell
Abbreviated Name
cpichEcNoMinThrd
Managed Object

2-618
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum CPICH EcN0 threshold

Instance
RNC
N/A
N/A
Small Cell Package
(-24..0) dB
Unit
db
Default Value
-11
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the minimum CICH
Ec/N0 threshold when a UTRAN neighbor cell is added. A neighbor

Reason
Change Take Effect
No
2-619
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
add
2.5.4 Minimum Neighboring GSM Cell's RSSI Threshold for Pico

Cell
Full Name
Minimum Neighboring GSM Cell's RSSI Threshold for Pico Cell
Abbreviated Name
gsmRssiMinThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum GSM RSSI threshold when a

GSM neighboring cell is added. A neighboring cell can be added
only when its measured signal quality is greater than or equal to
this threshold.
Instance
RNC
N/A
N/A
Small Cell Package
(-115..-25 ) dBm
Unit
dbm
Default Value
-110
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-620
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the minimum GSM
RSSI threshold when a GSM neighbor cell is added. A neighbor cell

can be added only when its measured signal quality is not smaller
than the threshold.
Configuration rule: The larger the value is, the more difficult to add
cells to the neighbor cell list (the handover may fail due to lack of
proper neighbor cells). The smaller the value is, the easier it is to
add a cell with poorer quality to the neighbor cell list, which may
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.5.5 ANR Handle Mode

Full Name
ANR Handle Mode
Abbreviated Name
anrMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-621
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the ANR processing mode, options:

0: controlled mode
1: automatic mode
The controlled mode needs manual intervention, and neighbour
relation can be changed only after manual confirmation. The
automatic mode is that neighbour relation is automatically changed
through the algorithm.
Instance
RNC
N/A
N/A
0: controlled mode
1: automatic mode
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the ANR processing
mode, options:
0: automatic mode
1: controlled mode
The controlled mode needs manual intervention, and neighbour
relation can be changed only after manual confirmation. The
automatic mode is that neighbour relation is automatically changed
through the algorithm.
Reason
Change Take Effect
No
How to Impact
N/A
2-622
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.5.6 Delete Neighbor Cell Period of Macro Cell

Full Name
Delete Neighbor Cell Period of Macro Cell
Abbreviated Name
tWaitDelMacNbrPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the neighboring cells deleting period for

macro cell. When the period is ended, some neighboring cells are
deleted based on the KPI statistics.
Instance
RNC
N/A
N/A
(1..255)day
Unit
day
Default Value
15day
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-623
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the neighboring cells
deleting period for macro cell.

Related factor: timeliness of neighboring cells.
Configuration rule: The larger the setting, the less timeliness of
neighboring cell updates, causing the handover to be affected. The
smaller the setting, the more frequent neighboring cell updates,
which may cause the ping-pong addition or deletion of neighboring
cells (not good for system stability).
The default setting is based on the timeliness of neighboring cells.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.5.7 Delete Neighbor Cell Period of Pico Cell

Full Name
Delete Neighbor Cell Period of Pico Cell
Abbreviated Name
tWaitDelPicoNbrPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the neighboring cells deleting period for

micro cell. When the period is ended, some neighboring cells are
deleted based on the KPI statistics.
Instance
RNC
N/A
N/A
2-624
SJ-20141209142030-013|2015-11-12 (R1.3)
(1..255)day
Unit
day
Default Value
15day
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the neighboring cells
deleting period for micro cell.

Related factor: timeliness of neighboring cells.
Configuration rule: The larger the setting, the less timeliness of
neighboring cell updates, causing the handover to be affected. The
smaller the setting, the more frequent neighboring cell updates,
which may cause the ping-pong addition or deletion of neighboring
cells (not good for system stability).
The default setting is based on the timeliness of neighboring cells.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.5.8 Minimum Neighboring Utran Cell's Cpich RSCP Threshold

for Pico Cell
2-625
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Minimum Neighboring Utran Cell's Cpich RSCP Threshold for Pico

Cell
Abbreviated Name
cpichRscpMinThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum CPICH RSCP threshold

Instance
RNC
N/A
N/A
Small Cell Package
(-120..-25) dBm
Unit
dbm
Default Value
-106
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the minimum CPICH
RSCP threshold when a UTRAN neighbor cell is added. A neighbor

Reason
2-626
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.5.9 Minimum Neighboring Utran Cell's Cpich EcNo Threshold

for Pico Cell
Full Name
Minimum Neighboring Utran Cell's Cpich EcNo Threshold for Pico

Cell
Abbreviated Name
cpichEcNoMinThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum CPICH EcN0 threshold

Instance
RNC
N/A
N/A
Small Cell Package
(-24..0) dB
Unit
db
Default Value
-11
Related Parameters
N/A
2-627
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the minimum CICH
Ec/N0 threshold when a UTRAN neighbor cell is added. A neighbor

Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
add
2.5.10 Minimum Neighboring GSM Cell's RSSI Threshold for Pico

Cell
Full Name
Minimum Neighboring GSM Cell's RSSI Threshold for Pico Cell
Abbreviated Name
gsmRssiMinThrd
Managed Object

2-628
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum GSM RSSI threshold when a

GSM neighboring cell is added. A neighboring cell can be added
only when its measured signal quality is greater than or equal to
this threshold.
Instance
RNC
N/A
N/A
Small Cell Package
(-115..-25 ) dBm
Unit
dbm
Default Value
-110
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the minimum GSM
RSSI threshold when a GSM neighbor cell is added. A neighbor cell

can be added only when its measured signal quality is not smaller
than the threshold.
Configuration rule: The larger the value is, the more difficult to add
cells to the neighbor cell list (the handover may fail due to lack of
proper neighbor cells). The smaller the value is, the easier it is to
add a cell with poorer quality to the neighbor cell list, which may
Reason
Change Take Effect
No
How to Impact
N/A
2-629
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
add
2.6 RNC Pool Global Configuration (URncPool)

2.6.1 RNC Pool Global Configuration Object ID
Full Name
RNC Pool Global Configuration Object ID
Abbreviated Name
URncPoolId
Managed Object
RNC Pool Global Configuration (URncPool)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the global RNC Pool

configuration.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-630
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->RNC Pool Global Configuration
N/A
N/A
2.6.2 The Check Period of RNC Load

Full Name
The Check Period of RNC Load
Abbreviated Name
rncLdCheckPrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period of checking load of the RNC. If

the RNC is overloaded, the call transfer procedure is started.
Instance
RNC
ZWF21-30-207
1..65535
Unit
Default Value
60
Related Parameters
RncLdValidTime
2-631
SJ-20141209142030-013|2015-11-12 (R1.3)
The value of the RncLdCheckPrd parameter must be smaller than
Parameters
that of the RncLdValidTime parameter.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the period of checking load of the
RNC.
Related factors: load sharing effect and system load.
If this parameter is set to a greater value, the period of checking
load between RNCs is longer, the response to system overload is
slower, and the load sharing effect is poorer.
If this parameter is set to a smaller value, the period of checking
load between RNCs is shorter, the response to system overload is
faster, and the load sharing effect is better.
The default value is set based on the load sharing effect.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.6.3 The Valid time of RNC load

Full Name
The Valid time of RNC load
Abbreviated Name
rncLdValidTime
Managed Object

3GPP Name
N/A
2-632
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates The Valid time of RNC load. The RNC
periodically calculates LOAD. When the Load Check Timer
expires, if the period of LOAD calculated the last time exceeds this
parameter, the LOAD of the RNC is considered to be invalid.
Instance
RNC
ZWF21-30-207
1..65535
Unit
Default Value
90
Related Parameters
RncLdCheckPrd
The value of the RncLdCheckPrd parameter must be smaller than
Parameters
that of the RncLdValidTime parameter.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter Function: indicates The Valid time of RNC load.
Related factors: load sharing effect and reliability.

If this parameter is set to a greater value, the validity period of load
between RNCs is longer, the load sharing effect is better, and the
Reliability is lower.
If this parameter is set to a smaller value, the validity period of load
between RNCs is shorter, the load sharing effect is poorer, and the
Reliability is higher.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-633
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.6.4 The OverLoad threshold of Control Plane

Full Name
The OverLoad threshold of Control Plane
Abbreviated Name
poolCpOverThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates The OverLoad threshold of Control Plane.

The RNC periodically calculates LOAD. When the Load Check
Timer expires, if the LOAD calculated the last time exceeds this
parameter, the RNC is considered to be OverLoad.
Instance
RNC
ZWF21-30-207
1..100
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-634
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates The OverLoad threshold of Control
Plane.
Related factors: load sharing effect and additional load.
If this parameter is set to a greater value, the additional load of this
function is smaller, and the load sharing effect is poorer.
If this parameter is set to a smaller value, the additional load of this
function is greater, and the load sharing effect is better.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.6.5 The OverLoad threshold of User Plane

Full Name
The OverLoad threshold of User Plane
Abbreviated Name
poolUpOverThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates The OverLoad threshold of User Plane.

The RNC periodically calculates LOAD. When the Load Check
Timer expires, if the LOAD calculated the last time exceeds this
parameter, the RNC is considered to be OverLoad.
Instance
RNC
ZWF21-30-207
2-635
SJ-20141209142030-013|2015-11-12 (R1.3)
1..100
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates The OverLoad threshold of User
Plane.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.6.6 The Ratio for Reverse Relocation of CS

Full Name
The Ratio for Reverse Relocation of CS
Abbreviated Name
csRRelocRatio
2-636
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After the RNC initiates call transfer, this parameter indicates the
ratio of the number of CS subscribers transferred at a time to the
number of all CS subscribers.
Instance
RNC
ZWF21-30-207
0..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicate the Ratio for Reverse Relocation of CS.

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-637
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.6.7 The Ratio for Reverse Relocation of PS

Full Name
The Ratio for Reverse Relocation of PS
Abbreviated Name
psRRelocRatio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After the RNC initiates call transfer, this parameter indicates the
ratio of the number of PS subscribers transferred at a time to the
number of all PS subscribers.
Instance
RNC
ZWF21-30-207
0..100
Unit
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-638
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicate the Ratio for Reverse Relocation of PS.

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.6.8 The Delay Timer After Reverse Relocation

Full Name
The Delay Timer After Reverse Relocation
Abbreviated Name
rRelocDelayTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When a UE is transferred from one RNC to another RNC in the

POOL, the UE cannot be relocated during the time specified by
this parameter.
Instance
RNC
ZWF21-30-207
1..65535
2-639
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
Default Value
1800
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the Delay Timer After Reverse
Relocation.
Related factors: user experience, IUR interface load, and the effect
of load sharing performed among RNCs.
If this parameter is set to a greater value, the IUR interface load is
heavier, the user experience is poorer, and the effect of load sharing
performed among RNCs is better.
If this parameter is set to a smaller value, the IUR interface load is
lighter, the user experience is better, and the effect of load sharing
performed among RNCs is poorer.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-640
SJ-20141209142030-013|2015-11-12 (R1.3)
2.7 Reserved User Global Configuration

(URsvdUeGlobalPara)
2.7.1 Reserved User Global Configuration Object ID
Full Name
Reserved User Global Configuration Object ID
Abbreviated Name
URsvdUeGlobalParaId
Managed Object
Reserved User Global Configuration (URsvdUeGlobalPara)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the global reserved user

configuration.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-641
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Reserved User Global
Configuration
N/A
N/A
2.7.2 HS-SCCH Less Switch for Reserved User

Full Name
HS-SCCH Less Switch for Reserved User
Abbreviated Name
rsvdLessCfgSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether reserved subscribers can use

the HS-SCCH Less.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
2-642
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: when HS-SCCH LESS is used, the control
load of the HS-SCCH is decreased, and thus, the capacity can

be increased and the HSDPA real time service delay is reduced.
However, because the TB size is fixed, the transmission efficiency
may be reduced because too many bits are filled. In addition, the
data can be retransmitted at most twice to avoid the increase of
the bit error rate. This function should be enabled if the use of
HS-SCCH LESS can provide better user experience and HS-SCCH
LESS is required by the carrier for the reserved subscribers.
By default, this function is disabled. Whether to enable this function
Reason
is determined by the user experience and whether the carrier allows

reserved subscribers to use this function.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.3 DTX/DRX Switch for Reserved User

Full Name
DTX/DRX Switch for Reserved User
Abbreviated Name
rsvdDtxdrxCfgSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether reserved subscribers can use

the DTX/DRX.
Instance
RNC
N/A
2-643
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether reserved
subscribers can use the DTX/DRX.

Configuration rule: The use of DTX and DRX is to increase
the system capacity by reducing power-control efficiency. The
function should be enabled if user's QoS experience is better when
DTX/DRX is used and DTX/DRX is required by the carrier for the
reserved subscribers.
By default, this function is disabled. Whether to enable this function
Reason
is determined by the user experience and whether the carrier allows

reserved subscribers to use this function.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2-644
SJ-20141209142030-013|2015-11-12 (R1.3)
2.7.4 DL DPCH Initial Power Offset for Reserved User Relative to

Normal User
Full Name
DL DPCH Initial Power Offset for Reserved User Relative to Normal

User
Abbreviated Name
rsvdUserPwrOffset
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DL DPCH initial power offset of a

reserved subscriber compared to that of a normal subscriber. When
the initial downlink power of a reserved subscriber is calculated,
the power offset must be added to the initial downlink power of a
normal subscriber.
Instance
RNC
N/A
N/A
(-50..50)dB, step 0.1dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-645
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the DL DPCH initial
power offset of a reserved subscriber compared to that of a normal

subscriber. When the initial downlink power of a reserved subscriber
is calculated, the power offset must be added to the initial downlink
power of a normal subscriber.
Related factors: Whether the initial downlink power of reserved
subscribers must be higher than that of normal subscribers.
The higher the value is, the higher the initial downlink power for
The lower the value is, the lower the initial downlink power for
The system capacity is considered to define this default value.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.5 CS Reserved Specific Downlink Carrier Central Frequency

Indicator
Full Name
CS Reserved Specific Downlink Carrier Central Frequency Indicator
Abbreviated Name
rsvDlArfcnforCsInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the downlink central frequency of CS

reserved carrier.
2-646
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
0..16383
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: downlink central frequency of the reserved
carrier
Related factor: set it based on the network planning of the carrier.
This parameter should be set according to operator network
Reason
deployment.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.6 Reserved User Forced Handover Switch

Full Name
Reserved User Forced Handover Switch
2-647
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
rsvForcedHoSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the forced handover policy is

enabled for the reserved carrier frequency. When the switch is
turned on, the RNC will hand over non-reserved users that exceed
the threshold to a non-reserved carrier.
Instance
RNC
N/A
N/A
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: forced handover strategy switch for the
reserved carrier frequency

Related factors: reserved user performance, non-reserved user
performance
When the switch is turned on, the RNC will hand over non-reserved
users that exceed the threshold to a non-reserved carrier. This can
guarantee the performance of reserved users.
This parameter should be set according to reserved users
Reason
performance and non-reserved user performance.
Change Take Effect
No
2-648
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.7 Reserved Specific Frequency Strategy Switch

Full Name
Reserved Specific Frequency Strategy Switch
Abbreviated Name
rsvSpecFreqSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When VipSpecFreqSwch is true, the RNC will balance reserved

users to reserved carrier frequency. Non-reserved user will be
balanced to Non-reserved carrier frequency in the case of high load.
Instance
RNC
N/A
N/A
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-649
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: switch of strategy for reserved carrier frequency
Reason
deployment.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.8 PS Reserved Specific Downlink Carrier Central Frequency

Indicator
Full Name
PS Reserved Specific Downlink Carrier Central Frequency Indicator
Abbreviated Name
rsvDlArfcnforPsInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the downlink central frequency of PS

reserved carrier.
Instance
RNC
N/A
N/A
0..16383
Unit
N/A
2-650
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: downlink central frequency of the reserved
carrier
Reason
deployment.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.9 Non-Reserved CS User Strategy Switch in RRC Procedure

Full Name
Non-Reserved CS User Strategy Switch in RRC Procedure
Abbreviated Name
rrcNonRsvCsStra
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-651
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is the switch of non-reserved CS user load balance

strategy in RRC procedure. If the switch is turned on, the reserved
user load balance strategy for non-reserved CS users is performed
in RRC procedure.
Instance
RNC
N/A
N/A
0: Off
1: ON
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch of non-reserved CS user load balance
strategy in RRC procedure

Related factor: application scenario
If the switch is turned off, the reserved user load balance strategy
for non-reserved CS users is not performed in RRC procedure.
If the switch is turned on, the reserved user load balance strategy
for non-reserved CS users is performed in RRC procedure.
actual scene
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
2-652
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.7.10 Non-Reserved PS User Strategy Switch in RRC Procedure

Full Name
Non-Reserved PS User Strategy Switch in RRC Procedure
Abbreviated Name
rrcNonRsvPsStra
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the switch of non-reserved PS user load balance

strategy in RRC procedure. If the switch is turned on, the reserved
user load balance strategy for non-reserved PS users is performed
in RRC procedure.
Instance
RNC
N/A
N/A
0: Off
1: ON
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
2-653
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: switch of non-reserved PS user load balance
strategy in RRC procedure

Related factor: application scenario
If the switch is turned off, the reserved user load balance strategy
for non-reserved PS users is not performed in RRC procedure.
If the switch is turned on, the reserved user load balance strategy
for non-reserved PS users is performed in RRC procedure.
actual scene
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.11 Switch of Reserved User Forbidden MR

Full Name
Switch of Reserved User Forbidden MR
Abbreviated Name
mrBarSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for forbidding reserved users

from MR collection.
If the switch is turned on, reserved users are forbidden from MR
collection.
If the switch is turned off, reserved users are not forbidden from
MR collection.
Instance
RNC
2-654
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
0: Off
1: ON
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
This parameter controls whether reserved users are forbidden from
MR.
Related factors: switch of reserved user test. If the reserved user
test starts, this function needs to be enabled.
The value 0 indicates that the function is disabled.
The value 1 indicates that the function is enabled.
By default, the function is disabled. Enable this function when
required.
The default value is set to meet the requirement of reserved users'
Reason
performance.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2-655
SJ-20141209142030-013|2015-11-12 (R1.3)
2.7.12 Switch of Reserved User Released RRC when the only

Remaining SRB on D/E
Full Name
Switch of Reserved User Released RRC when the only Remaining

SRB on D/E
Abbreviated Name
onlySrbRrcRelSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a functional switch that controls whether to

release a reserved user's RRC when the user has only remaining
SRB on D/E..
If the switch is turned on, the RNC will release a reserved user' RRC
when it has only remaining SRB on D/E.
If the switch is turned off, the RNC will not release a reserved user'
RRC when it has only remaining SRB on D/E.
Instance
RNC
N/A
N/A
0: Off
1: ON
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
2-656
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter controls whether to release a reserved user's RRC
when the user has only remaining SRB on D/E..

Related factors: switch of reserved user test. If the reserved user
test starts, this function needs to be enabled.
required.
The default value is set to meet the requirement of reserved users'
Reason
performance.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.13 Switch for Reserved User Identification

Full Name
Switch for Reserved User Identification
Abbreviated Name
rsvdUeLstSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Parameter Function: This parameter indicates whether the

Reserved user identification function is open or not.
In ZTE network, specific IMSI can be added to the Reserved User
List, for which special QoS parameters(e.g .priority parameters,
power control paramaters) can be set.This parameter is used to
control whether to active the Reserved User identification function.
2-657
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter Function: This parameter indicates whether the
Reserved user identification function is open or not.

Related factors: whether to provide special QoS service for
specific users. In ZTE network, specific IMSI can be added to the
Reserved User List, for which special QoS parameters(e.g .priority
parameters, power control paramaters) can be set.
Adjustment suggestion: if the function is set to "1: On", and
Reserved Users exist in the network, the performance of common
users may be worse(the service online maybe dropped and new
ordinary service maybe access failed); if the function is set to "0:
Off", no Reserved Users exist in the network.
If the function is opened, the performance of common users may be
Reason
worse (the service online maybe dropped and new ordinary service
maybe access failed). So the feature is not activated by default.
Change Take Effect
Yes
How to Impact
Call drop and call setup failed
Access
Read/Write
2-658
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Configuration
N/A
N/A
2.7.14 User Drop Switch Triggered by Reserved User

Full Name
User Drop Switch Triggered by Reserved User
Abbreviated Name
dropForRsvdUeSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the forced call drop will be

triggered when the number of online non-reserved PS users in
CELL_DCH state is larger than the threshold and reserved users
exist in the cell.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-659
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: whether the forced call drop will be triggered
when the number of online non-reserved PS users in CELL_DCH

state is larger than the threshold and reserved users exist in the cell.
Related factors: performance requirements of reserved users and
non-reserved users.
If the parameter is set to "On", the forced call drop will be triggered
when the number of online non-reserved users in CELL_DCH state
is larger than the threshold and reserved users exist in the cell.
Otherwise, it will not be triggered.
For the dafault value of RsvdUeLstSwitch is "off", this parameter
Reason
is invalid. The default value of this parameter is set to "on" to

guarantee the performance of the reserved user once the value of
RsvdUeLstSwitch is set to "on".
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.15 Notification Switch for Reserved User Existing

Full Name
Notification Switch for Reserved User Existing
Abbreviated Name
rsvdUeEstNtfSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-660
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether to notify neighboring cells when

reserved users exist in the cell. If the parameter is set to "1: On",
the neighboring cells are notified to lower the load and guarantee
the performance of reserved users. If the parameter is set to "Off",
the neighboring cells are not notified.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: whether to notify neighboring cells when
reserved users exist in the cell.

non-reserved users.
If the parameter is set to "On", the neighboring cells are notified of
reserved users to lower the load and guarantee the performance of
reserved users. If the parameter is set to "Off", the neighboring
cells are not notified.
For the dafault value of RsvdUeLstSwitchis "off", this parameter
Reason
is invalid. The default value of this parameter is set to "on" to

Change Take Effect
Yes
How to Impact
2-661
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.16 Lowest Priority of Neighbor Cell Notified of Reserved User

Existing
Full Name
Lowest Priority of Neighbor Cell Notified of Reserved User Existing
Abbreviated Name
rsvdUeNtfNbrPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the lowest priority of neighboring cells to

be notified when reserved users exist in the cell. The priority here
means the Measurement Priority (MeasPrio) of neighboring cells.
Only the neighboring cell whose Measurement Priority is equal to or
higher than the priority will be notified.
Instance
RNC
N/A
N/A
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-662
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: lowest priority of neighboring cells to be notified
when reserved users exist in the cell. Note: the priority here means
the measurement priority (MeasPrio) of neighboring cells. Only the
neighboring cell whose measurement priority is equal to or higher
than the priority will be notified.
non-reserved users.
The larger the parameter is, the more the cells that will be affected
when reserved users exist in the cell are, and the higher the
probability of ensuring the performance of reserved users is. The
smaller the parameter is, the fewer the cells that will be affected
when reserved users exist in the cell are, and the lower the
probability of ensuring the performance of reserved users is.
For the dafault value of RsvdUeLstSwitchis "off", this parameter
Reason
is invalid. The default value of this parameter is set to "2" to

Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.17 Switch of the DCH 27.2kbps Rate whether to be Used for

Reserved Users' Initial RRC Connection Setup
Full Name
Switch of the DCH 27.2kbps Rate whether to be Used for Reserved

Users' Initial RRC Connection Setup
Abbreviated Name
rsvdUeRrcSrb272Swch
Managed Object
2-663
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DCH 27.2 kbps Rate whether to be

used for reserved Users initial RRC Connection Setup.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Function: Sets whether the resvered user uses the DCH 27.2kbps
rate during the initial RRC connection setup.

If the switch is on, the resvered user signaling can be established
faster, which occupies more resources.
The reason of the parameter's default value is to consider the
Reason
utilization ratio of radio resource.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
2-664
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.7.18 HSUPA TTI Configuration Method for Reserved Users

Full Name
HSUPA TTI Configuration Method for Reserved Users
Abbreviated Name
rsvdUeEttiCfgMeth
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the HSUPA E-TTI configuration method

for reserved users.
Instance
RNC
N/A
N/A
0: off
1: E-TTI is allocated based on CPICH Ec/No, and 2ms/10ms TTI
transfer is allowed
2: 2ms E-TTI is fixed allocated, and 2ms/10ms TTI transfer isn't
allowed
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch of HSUPA E-TTI configuration method
for reserved users.

Related factors: user experiences and the resource utilization.
2ms TTI can provide a good user experience to reserved users, but
may influence the utilization ratio of radio resources.
2-665
SJ-20141209142030-013|2015-11-12 (R1.3)
The default setting considers whether to process reserved users
Reason
specially.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.19 Switch of SRB Transport Channel Configuration Method for

Reserved Users
Full Name
Switch of SRB Transport Channel Configuration Method for

Reserved Users
Abbreviated Name
rsvdUeSrbCfgSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the SRB transport channel configuration

method for reserved users. If the value is "On", SRB will be carried
on DCH during RAB period for reserved users.
Instance
RNC
N/A
N/A
0: off
1: on
Unit
N/A
2-666
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the SRB transport
channel configuration method for reserved users.

Related factors: dropped-call rate and the resource utilization.
SRB on DCH can decrease the call drop ratio but may influence the
utilization ratio of code resources.
The default setting considers whether to process reserved users
Reason
specially.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.20 Threshold of Ec/No Requested when HSUPA 2ms TTI is

Configured for Reserved Users
Full Name
Threshold of Ec/No Requested when HSUPA 2ms TTI is Configured

for Reserved Users
Abbreviated Name
rsvdUeEttiEcNoThd
Managed Object

2-667
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of Ec/No requested for

HSUPA 2ms TTI. When rsvdUeEttiCfgMeth is "1", only when the
CPICH Ec/No that UE reported is more than the threshold, 2ms TTI
can be used for reserved User.
Instance
RNC
N/A
N/A
(-24..0)dB, step 0.5dB
Unit
dB
Default Value
-7
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the threshold of Ec/No
requested for HSUPA 2ms TTI.When rsvdUeEttiCfgMeth is "1", only

when the CPICH Ec/No that UE reported is more than the threshold,
2ms TTI can be used for reserved User.
A larger value indicates that it is difficult to use 2ms TTI, affecting
the user experience.
A small value indicates that it is easy to use 2ms TTI, affecting the
call drop ratio because of bad channel quality.
The default setting is based on the dropped-call rate and the user
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-668
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Configuration
N/A
N/A
2.7.21 Reserved User State Transfer Switch

Full Name
Reserved User State Transfer Switch
Abbreviated Name
rsvdUeStateChgSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of reserved user state transition.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
2-669
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the switch of
reserved user state transition. If the parameter is set to 0:

Off, reserved users cannot switch from CELL_DCH state to
CELL_FACH/CELL_PCH/URA_PCH/IDLE state. If the parameter is
set to 1: On, reserved users can switch from CELL_DCH state to
CELL_FACH/CELL_PCH/URA_PCH/IDLE state.
Related factors: PS performance of reserved users
Adjustment suggestion: This parameter is a RNC global switch
and should be set based on reserved user PS test requirements.
It is suggested to set the parameter to 0: Off to guarantee the PS
performance of reserved users.
Reserved users only exist in test cases. To guarantee the test
Reason
performance, the state transition function is disabled.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.22 Switch of Faster L1 DCH synchronization function for

Reserved User
Full Name
Switch of Faster L1 DCH synchronization function for Reserved User
Abbreviated Name
rsvdFastL1SyncSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the faster L1 DCH synchronization

function is enabled for Reserved users.
2-670
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-05-027
VIP Qos
Reserved User QoS Guarantee FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the faster L1
DCH synchronization function is enabled for Reserved users.
The faster DCH synchronization function is disabled by default
Reason
because not all UEs support the faster DCH synchronization

function.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.23 Reserved RUB Switch

2-671
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Reserved RUB Switch
Abbreviated Name
rubRsvdSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to reserve RUB resources for

a specific UE.
If this parameter is set to 1 (switched on), RUB resources are
reserved for a specific UE.
If this parameter is set to 0 (switched off), all UEs must obtain RUB
resources from the resource pool.
Instance
Rnc
N/A
N/A
0: Off
1: Switch On , RUP Reserved for high-version UE
2: Switch On, RUP Reserved for VIP User
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter is used for test and
demonstration. It is configured in accordance with the actual

condition on field.
If the function is enabled, the UEs for which RUB resources are
reserved can obtain sufficient user plane resources.
If the function is disabled, all UEs will obtain RUB resources from the
resource pool. Whether a UE can obtain sufficient RUB resources
depends on the number of UEs.
2-672
SJ-20141209142030-013|2015-11-12 (R1.3)
This function is disabled by default because it is only for
Reason
demonstration.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.24 UE Version for Reserved RUB

Full Name
UE Version for Reserved RUB
Abbreviated Name
rubRsvdNeedUEVer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the earliest protocol version of UEs that

are allowed to use reserved RUB resources.
UEs with this version or later versions are allowed to use reserved
RUB resources.
Instance
Rnc
N/A
N/A
2-673
SJ-20141209142030-013|2015-11-12 (R1.3)
0: No Reserved RUB
1: R3
2: R4
3: R5
4: R6
5: R7
6: R8
7: R9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
demonstration. The protocol version must be determined in

accordance with the actual condition on field.
Reason
demonstration.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.25 Downlink Reserved Bandwidth for Reserved UE's I/B Traffic

2-674
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Downlink Reserved Bandwidth for Reserved UE's I/B Traffic
Abbreviated Name
rsvDlResBwd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The Iub/Iur overbooking function controls the downlink throughput

of all UEs of a Node B and ensures that the downlink throughput
does not exceed the downlink bandwidth of the Iub/Iur transport
network. In Iub/Iur overbooking, the downlink throughput of a UE's
PS streaming service, interactive service, and background service
is influenced by multiple factors, such as QoS, traffic requirement,
radio resource capacity, transport network bandwidth, and the
application priority adjustment coefficient.
This parameter indicates the downlink transport network bandwidth
reserved for PS services of reserved users. The reserved bandwidth
allows more transport resources to be allocated to the reserved
UEs for QoS improvement.
Instance
RNC
N/A
N/A
(0..65535) kbps, step 1 kbps
Unit
kbps
Default Value
200 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-675
SJ-20141209142030-013|2015-11-12 (R1.3)
This default value is set according to the expected QoS improvement
for a reserved UE and the usage of Iub/Iur transport network

resources when the Iub/Iur transport network bandwidth is limited.
When the Iub/Iur transport network bandwidth is limited, the larger
this parameter is set to, the heavier the downlink traffic allowed for
reserved UEs becomes. The QoS of the reserved UEs is improved
but the usage of transmission resources may be reduced.
When the Iub/Iur transport network bandwidth is limited, the smaller
this parameter is set to, the lighter the downlink traffic allowed for
reserved UEs becomes. The QoS of the reserved UEs is reduced
but the usage of transmission resources may be increased.
Reason
for a reserved UE and the usage of Iub/Iur transport network

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.26 Switch of expanding PDCP downlink buffer for reserved

Users
Full Name
Switch of expanding PDCP downlink buffer for reserved Users
Abbreviated Name
rsvExpPdcpBufSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-676
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
To ensure the QoS, an RNC allocates an IU downlink data buffer for

each PS service to store the downlink service data that is received
from the SGSN or GGSN but is not sent to the UE.
If this switch is turned on, the PDCP buffer for the downlink data of
reserved subscribers PS services can be extended.
Instance
RNC
N/A
N/A
N/A
0, 1
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The default value of this parameter is set based on reserved
subscribers PS service quality and board resource usage.

If this switch is turned off, for the same PS service, the IU downlink
buffer allocated for a reserved subscriber and a common subscriber
is the same. The downlink buffer limit may affect the QoS of the
reserved subscriber but less board memory resources are used.
If this switch is turned on, for the same PS service, more IU downlink
buffer is allocated for a reserved subscriber than a common
subscriber (UDiamondUserGlobalPara.DmdPdcpDlBufLmt sets the
upper limit of the buffer). The QoS of the reserved subscriber may
be improved but more board memory resources may be used.
This default value is set according to reserved subscribers PS
Reason
service quality and board resource usage.
Change Take Effect
New Connection
No
2-677
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.27 Upper Limit of PDCP downlink buffer for reserved Users

Full Name
Upper Limit of PDCP downlink buffer for reserved Users
Abbreviated Name
rsvPdcpDlBufLmt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

This parameter sets the upper limit of the IU downlink data buffer for
every PS service of a reserved subscriber.
Instance
RNC
N/A
N/A
N/A
0..20000000
Unit
byte
Default Value
3000000
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-678
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
The default value of this parameter is set based on reserved

For the same PS service, the larger this parameter is set to, the more
the IU downlink buffer allocated for a reserved subscriber becomes
(the maximum buffer is 20 MB). The QoS of the reserved subscriber
may be improved but more board memory resources may be used.
For the same PS service, the smaller this parameter is set to, the
smaller the difference between the IU downlink buffer allocated for
a reserved subscriber and a common subscriber becomes. The
downlink buffer limit may affect the QoS of the reserved subscriber
but less board memory resources are used.
This default value is set according to reserved subscribers PS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.28 Overbooking priority value for reserved users

Full Name
Overbooking priority value for reserved users
Abbreviated Name
rsvOverBookPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-679
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
The Iub/Iur overbooking function of the RNC limits the downlink

traffic of all UE services from an SRNC to a NodeB (or DRNS) to
ensure that the downlink traffic is not heavier than the traffic that the
downlink bandwidth of the transport network can support. During
overbooking, the downlink traffic of a UE's PS streaming, interactive,
and background services are affected by multiple factors such as
QoS, traffic requirements, radio resource capacity, and transport
network bandwidth.
This parameter indicates the overbooking priority value for a
reserved subscriber's PS services borne on HS-DSCHs. Through
this parameter, the reserved subscriber can make more requests
for PS streaming, interactive, and background services and the
transport network bandwidth for the reserved subscriber can be
increased.
Instance
RNC
N/A
N/A
N/A
1.0..10.0, step: 0.1
Unit
N/A
Default Value
2.0
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set according to the expected QoS improvement
for a reserved subscriber and the usage of Iub/Iur transport network

this parameter is set to, the heavier the downlink traffic allowed
for a reserved subscriber becomes. The QoS of the reserved
subscriber is improved but the usage of transmission resources
may be reduced.
this parameter is set to, the lighter the downlink traffic allowed
for a reserved subscriber becomes. The QoS of the reserved
2-680
SJ-20141209142030-013|2015-11-12 (R1.3)
subscriber is reduced but the usage of transmission resources may

be increased.
Reason

Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.7.29 Switch of Overbooking priority value for reserved users

Full Name
Switch of Overbooking priority value for reserved users
Abbreviated Name
rsvOverBookPriSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

network bandwidth.
If this switch is turned on, a reserved subscriber can make more
requests for PS streaming, interactive, and background services
and the transport network bandwidth for the reserved subscriber
during lub/lur transport network congestion can be increased.
2-681
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
N/A
0, 1
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

If this switch is turned on, a reserved subscriber can make more
during lub/lur transport network congestion and the usage of
transport network resources may be reduced.
If this switch is turned off, a reserved subscriber can make less
transport network resources may be increased.
Reason

Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-682
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Configuration
N/A
N/A
2.7.30 TCP Optimization for the reserved user

Full Name
TCP Optimization for the reserved user
Abbreviated Name
vipTcpOptSwch
Managed Object

3GPP Name
N/A
3GPP Reference
RFC793
Description
This parameter indicates whether to enable the TCP optimization for

reserved subscribers. For reserved subscribers, when the Uplink
ACK Duplicating Switch or the Downlink Local Retransmission
Switch or the Uplink ACK Splitting Switch, or the Local TCP Agent
Optimization Switch needs to be turned on, you can turn on this
TCP optimization switch for reserved subscribers or turn on the
RNC-level TCP optimization switch.
Instance
RNC
N/A
N/A
N/A
0, 1
0: TCP Optimization for all users
1: TCP Optimization for reserved users
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-683
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
If this switch is turned on, the data transmission rate is increased.
However, the CPU load is also increased.

If this switch is turned off, the data transmission rate is reduced.
However, the CPU load is also reduced.
This default value is set according to the data transmission rate
Reason
and the CPU load.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8 Diamond User Global Configuration

(UDiamondUserGlobalPara)
2.8.1 Diamond User Global Configuration Object ID
Full Name
Diamond User Global Configuration Object ID
Abbreviated Name
UDiamondUserGlobalParaId
Managed Object
Diamond User Global Configuration (UDiamondUserGlobalPara)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the global diamond user

configuration.
Instance
RNC
2-684
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Diamond User Global
Configuration
N/A
N/A
2.8.2 DL DPCH Initial Power Offset for Diamond User Relative to

Normal User
Full Name
DL DPCH Initial Power Offset for Diamond User Relative to Normal

User
2-685
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
dmdUserPwrOffset
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DL DPCH initial power offset of a

diamond subscriber compared to that of a normal subscriber. When
the initial downlink power of a diamond subscriber is calculated,
the power offset must be added to the initial downlink power of a
normal subscriber.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
(-50..50)dB, step 0.1dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the DL DPCH initial
power offset of a diamond subscriber compared to that of a normal

subscriber. When the initial downlink power of a diamond subscriber
is calculated, the power offset must be added to the initial downlink
power of a normal subscriber.
Related factors: Whether the initial downlink power of diamond
subscribers must be higher than that of normal subscribers.
The higher the value is, the higher the initial downlink power of
diamond subscribers.
The lower the value is, the lower the initial downlink power of
The system capacity is considered in setting this default value.
Reason
2-686
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.3 Switch of Diamond User Forbidden MR

Full Name
Switch of Diamond User Forbidden MR
Abbreviated Name
mrBarSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for forbidding diamond users

from MR collection.
If the switch is turned on, diamond users are forbidden from MR
collection.
If the switch is turned off, diamond users are not forbidden from
MR collection.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0: Off
1: ON
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
2-687
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter controls whether diamond users are forbidden from
MR.
Related factor: whether to enable the function
required.
The default value is set to meet the requirement of diamond users'
Reason
performance.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.4 Switch for Diamond User Identification

Full Name
Switch for Diamond User Identification
Abbreviated Name
dmdUeLstSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-688
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the diamond user list function is

enabled. In the ZTE network, specific IMSIs can be set to diamond
user, and special QoS parameters(for example priority and power
control) can be set for these users. This parameter controls whether
the function is enabled.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the diamond
user list function is enabled.

Related factors: whether to provide special QoS service for specific
users.
Effects: In the ZTE network, specific IMSIs can be added to the
diamond user list, and special QoS parameters (for example priority
and power control parameters) can be set for these users.
If the function is enabled, special QoS parameters can be set for
diamond users.
If the function is disabled, no diamond user exists in the network.
If the function is enabled, a special QoS policy will be used for
Reason
the diamond users. However, this may have a bad influence on

common users. The default value is set to "Off". This parameter can
be set to "1" based on the requirements of an operator.
Change Take Effect
No
2-689
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.5 Switch of the DCH 27.2kbps Rate whether to be Used for

Diamond User's Initial RRC Connection Setup
Full Name
Switch of the DCH 27.2kbps Rate whether to be Used for Diamond

User's Initial RRC Connection Setup
Abbreviated Name
dmdUeRrcSrb272Swch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the DCH 27.2 kbps rate is used
for diamond users initial RRC connection setup.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-690
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: indicates whether the DCH 27.2 kbps rate is
used for diamond users initial RRC connection setup.

Configuration effect:
Enabling this function can speed up the diamond user's signaling
setup process during RRC connection, but it occupies more power
resources.
The default value is set based on the resource utilization.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.6 Downlink Reserved Bandwidth for Diamond UE's I/B Traffic

Full Name
Downlink Reserved Bandwidth for Diamond UE's I/B Traffic
Abbreviated Name
dmdDlResBwd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-691
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
The Iub/Iur overbooking function controls the downlink throughput

of all UEs of a Node B and ensures that the downlink throughput
does not exceed the downlink bandwidth of the Iub/Iur transport
network. In Iub/Iur overbooking, the downlink throughput of a UE's
PS streaming service, interactive service, and background service
is influenced by multiple factors, such as QoS, traffic requirement,
radio resource capacity, transport network bandwidth, and the
application priority adjustment coefficient.
This parameter indicates the downlink transport network bandwidth
reserved for PS services of diamond users. The reserved bandwidth
allows more transport resources to be allocated to the diamond
UEs for QoS improvement.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
Unit
kbps
Default Value
20 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
for a diamond UE and the usage of Iub/Iur transport network

this parameter is set to, the heavier the downlink traffic allowed for
diamond UEs becomes. The QoS of the diamond UEs is improved
but the usage of transmission resources may be reduced.
this parameter is set to, the lighter the downlink traffic allowed for
diamond UEs becomes. The QoS of the diamond UEs is reduced
but the usage of transmission resources may be increased.
2-692
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
for a diamond UE and the usage of Iub/Iur transport network

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.7 Switch of expanding PDCP downlink buffer for diamond Users

Full Name
Switch of expanding PDCP downlink buffer for diamond Users
Abbreviated Name
dmdExpPdcpBufSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

If this switch is turned on, the PDCP buffer for the downlink data of
diamond subscribers PS services can be extended.
Instance
RNC
ZWF21-05-027
VIP User Priority
VIP Qos FG
0, 1
0: Off
1: On
2-693
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The default value of this parameter is set based on diamond

If this switch is turned off, for the same PS service, the IU downlink
buffer allocated for a diamond subscriber and a common subscriber
is the same. The downlink buffer limit may affect the QoS of the
diamond subscriber but less board memory resources are used.
If this switch is turned on, for the same PS service, more downlink
buffer is allocated for a diamond subscriber than a common
subscriber (UDiamondUserGlobalPara.DmdPdcpDlBufLmt sets the
upper limit of the buffer). The QoS of the diamond subscriber may
be improved but more board memory resources may be used.
This default value is set according to diamond subscribers PS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.8 Upper Limit of PDCP downlink buffer for diamond Users

2-694
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Upper Limit of PDCP downlink buffer for diamond Users
Abbreviated Name
dmdPdcpDlBufLmt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

This parameter sets the upper limit of the IU downlink data buffer
every PS service of a diamond subscriber.
Instance
RNC
ZWF21-05-027
VIP User Priority
VIP Qos FG
0..20000000
Unit
byte
Default Value
3000000
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The default value of this parameter is set based on diamond

For the same PS service, the larger this parameter is set to, the more
the IU downlink buffer allocated for a diamond subscriber becomes
(the maximum buffer is 20 MB). The QoS of the diamond subscriber
may be improved but more board memory resources may be used.
For the same PS service, the smaller this parameter is set to, the
smaller the difference between the IU downlink buffer allocated for
a diamond subscriber and a common subscriber becomes. The
downlink buffer limit may affect the QoS of the diamond subscriber
but less board memory resources are used.
2-695
SJ-20141209142030-013|2015-11-12 (R1.3)
This default value is set according to diamond subscribers PS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.9 Overbooking priority value for diamond users

Full Name
Overbooking priority value for diamond users
Abbreviated Name
dmdOverBookPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

network bandwidth.
This parameter indicates the overbooking priority value for a
diamond subscriber's PS services borne on High-Speed Downlink
Shared Channels (HS-DSCHs). Through this parameter, the
transport network bandwidth for the diamond subscriber can be
increased.
Instance
RNC
2-696
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-05-027
VIP User Priority
VIP Qos FG
1.0..10.0, step: 0.1
Unit
N/A
Default Value
2.0
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
for a diamond subscriber and the usage of Iub/Iur transport network

this parameter is set to, the heavier the downlink traffic allowed
for a diamond subscriber becomes. The QoS of the diamond
subscriber is improved but the usage of transmission resources
may be reduced.
this parameter is set to, the lighter the downlink traffic allowed
for a diamond subscriber becomes. The QoS of the diamond
subscriber is reduced but the usage of transmission resources may
be increased.
Reason

Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
2-697
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.8.10 Switch of Overbooking priority value for diamond users

Full Name
Switch of Overbooking priority value for diamond users
Abbreviated Name
dmdOverBookPriSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

network bandwidth.
If this switch is turned on, a diamond subscriber can make more
and the transport network bandwidth for the diamond subscriber
during lub/lur transport network congestion can be increased.
Instance
RNC
ZWF21-05-027
VIP User Priority
VIP Qos FG
0, 1
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-698
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
Yes

If this switch is turned on, a diamond subscriber can make more
transport network resources may be reduced.
If this switch is turned off, a diamond subscriber can make less
transport network resources may be increased.
Reason

Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.8.11 Switch of Congestion Control Strategy for Diamond Users in

RRC Connection Setup
Full Name
Switch of Congestion Control Strategy for Diamond Users in RRC

Connection Setup
Abbreviated Name
dmdUeRrcCongSwch
Managed Object
2-699
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the congestion control strategy

is used for diamond users during RRC connection setup in case of
signaling congestion. If this switch is enabled, congestion control
is performed. If this switch is disabled, no congestion control is
performed.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: congestion control switch for diamond users
during RRC connection setup.

Related factors: user experience.
If this switch is enabled, congestion control is performed for
diamond users, which improves user experience of diamond users
but degrades user experience of common users. If this switch is
disabled, user experience of diamond users may be affected in case
of congestion.
The default value is set according to stability of performance
Reason
indicators and user experience of diamond users.
Change Take Effect
New Connection
No
2-700
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
V4.13.10.15/V3.13.10.15
ADD
2.9 Common E-DCH in CELL_FACH State

Configuration(UEdchRcFach)
2.9.1 Common E-DCH in CELL_FACH State Configuration Object ID
Full Name
Common E-DCH in CELL_FACH State Configuration Object ID
Abbreviated Name
UEdchRcFachId
Managed Object
Common E-DCH in CELL_FACH State Configuration(UEdchRcFach)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the common E-DCH in

CELL_FACH state configuration.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-701
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Common E-DCH in

CELL_FACH State Configuration
N/A
N/A
2.9.2 Number of Reference E-TFCI (10ms E-TTI, E-TFCI Table0)

Full Name
Number of Reference E-TFCI (10ms E-TTI, E-TFCI Table0)
Abbreviated Name
rEtfcNumTti10T0
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the number of reference E-TFCIs when the

UE is configured with 10 ms E-TTI and E-TFCI table0. The UE uses
the configured reference E-TFCI and the power offset to calculate
the quantized value ed of the E-DPDCH power factor for each
E-TFC. For details, refer to TS25.214.
Instance
RNC
ZWF26-02-003
2-702
SJ-20141209142030-013|2015-11-12 (R1.3)
Enhanced UL CELL_FACH
Enhanced UL CELL_FACH FG
1..MAX_REF_ETFC
Where MAX_REF_ETFC is the maximum number of reference
E-TFCs and MAX_REF_ETFC=8.
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reference E-TFCIs when the UE is configured with 10 ms E-TTI

and E-TFCI table0.
Related factors: E-DCH service quality and uplink capacity of the
system.
The power of an E-TFCI is calculated most accurately based on
the reference E-TFCI with the same SF. Therefore, ensure that the
values of reference E-TFCIs are retrieved at the SF changing point
in an E-TFCI table.
If this parameter is set to a greater value, the number of reference
E-TFCIs is greater, the calculation of the E-DPDCH power is more
accurate, and the number of messages on the Uu interface is
greater.
If this parameter is set to a smaller value, the number of reference
E-TFCIs is smaller, the calculation of the E-DPDCH power is less
smaller.
The default value is set based on the E-DCH service quality and
Reason
uplink capacity of the system.
Change Take Effect
New Connection
No
How to Impact
N/A
2-703
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A
2.9.3 Set of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0)

Full Name
Set of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0)
Abbreviated Name
rEtfciTti10T0
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates a set of the reference E-TFCIs when

the UE is configured with 10 ms E-TTI and E-TFCI table0. The
UE uses the configured reference E-TFCI and the power offset to
calculate the quantized value ed of the E-DPDCH power factor for
each E-TFC. For details, refer to TS25.214. The MAX_REF_ETFC
parameter is the maximum number of reference E-TFCs, and the
value is 8.
Instance
RNC
ZWF26-02-003
0..127
Unit
N/A
Default Value
[1, 12, 48, 60, 77, 88]
Related Parameters
rEtfcNumTti10T0
The number of valid array elements of this parameter is determined
Parameters
by the rEtfcNumTti10T0 parameter, and the values of the elements

in the array must be different. The value 1 must exist.
Data Type
long[DBS_RR_MAX_REF_ETFC]
2-704
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates a set of the reference
E-TFCIs when the UE is configured with 10 ms E-TTI and E-TFCI

table0.
Related factor: The number of elements in the REtfciTti10T0 array
is determined by the REtfcNumTti10T0 parameter. The power of an
E-TFCI is calculated most accurately based on the reference E-TFCI
with the same SF. Therefore, ensure that the values of reference
E-TFCIs are retrieved at the SF changing point in an E-TFCI table.
Inappropriate reference E-TFCIs result in inaccurate power
calculation.
The default value is set based on the SF changing point in the
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.9.4 Power Offset of Reference E-TFCIs (10ms E-TTI, E-TFCI

Table0)
Full Name
Power Offset of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0)
Abbreviated Name
rEtfciPOTti10T0
Managed Object

3GPP Name
Reference E-TFCI Power Offset
2-705
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset of the reference E-TFCI

when the UE is configured with 10 ms E-TTI and E-TFCI table0. The
value is 8.
Instance
RNC
ZWF26-02-003
0..29
Unit
N/A
Default Value
[3, 6, 12, 13, 15, 16]
Related Parameters
rEtfcNumTti10T0
Parameters

in the array can be the same.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the power offset of
the reference E-TFCI when the UE is configured with 10 ms E-TTI

and E-TFCI table0.
system.
If this parameter is set to a greater value, the reference E-TFCI
power is greater, the uplink interference is greater, and the system
capacity is smaller.
If this parameter is set to a smaller value, the reference E-TFCI
power is smaller, and the service quality is poorer.
Reason
Change Take Effect
New Connection
2-706
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti10T1
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
RNC
ZWF26-02-003
1..MAX_REF_ETFC
Unit
N/A
Default Value
2-707
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table1.
system.
in an E-TFCI table.
greater.
smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-708
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
rEtfciTti10T1
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
RNC
ZWF26-02-003
0..120
Unit
N/A
Default Value
[0, 1, 5, 14, 41, 56, 72, 98]
Related Parameters
rEtfcNumTti10T1
Parameters

in the array must be different. The value 1 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-709
SJ-20141209142030-013|2015-11-12 (R1.3)

table1.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Table1)
Full Name
Abbreviated Name
rEtfciPOTti10T1
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-710
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

value is 8.
Instance
RNC
ZWF26-02-003
0..29
Unit
N/A
Default Value
[0, 6, 8, 11, 13, 15, 14, 16]
Related Parameters
rEtfcNumTti10T1
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table1.
system.
Reason
Change Take Effect
New Connection
No
2-711
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti2T0
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
RNC
ZWF26-02-003
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-712
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reference E-TFCIs when the UE is configured with 2 ms E-TTI and

E-TFCI table0.
system.
in an E-TFCI table.
greater.
smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-713
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rEtfciTti2T0
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates a set of the reference E-TFCIs when the

E-TFC. For details, refer to TS25.214. The MAX_REF_ETFC
value is 8.
Instance
RNC
ZWF26-02-003
0..127
Unit
N/A
Default Value
[1, 26, 39, 45, 51, 70, 79, 122]
Related Parameters
rEtfcNumTti2T0
Parameters
by the rEtfcNumTti2T0 parameter, and the values of the elements in

the array must be different. The value 1 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-714
SJ-20141209142030-013|2015-11-12 (R1.3)

table0.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Table0)
Full Name
Abbreviated Name
rEtfciPOTti2T0
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-715
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

value is 8.
Instance
RNC
ZWF26-02-003
0..29
Unit
N/A
Default Value
[9, 12, 13, 13, 13, 12, 13, 16]
Related Parameters
rEtfcNumTti2T0
Parameters

the array can be the same.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table0.
system.
Reason
Change Take Effect
New Connection
No
2-716
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti2T1
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
RNC
ZWF26-02-003
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-717
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

E-TFCI table1.
system.
in an E-TFCI table.
greater.
smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-718
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rEtfciTti2T1
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
RNC
ZWF26-02-003
0..125
Unit
N/A
Default Value
[1, 3, 16, 28, 36, 54, 62, 109]
Related Parameters
rEtfcNumTti2T1
Parameters

the array must be different. The value 1 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-719
SJ-20141209142030-013|2015-11-12 (R1.3)

table1.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Table1)
Full Name
Abbreviated Name
rEtfciPOTti2T1
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-720
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

value is 8.
Instance
RNC
ZWF26-02-003
0..29
Unit
N/A
Default Value
[11, 12, 14, 15, 12, 13, 12, 17]
Related Parameters
rEtfcNumTti2T1
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table1.
system.
Reason
Change Take Effect
New Connection
No
2-721
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.9.14 E-DPDCH Puncturing Limit (10ms E-TTI, E-TFCI Table0)

Full Name
E-DPDCH Puncturing Limit (10ms E-TTI, E-TFCI Table0)
Abbreviated Name
eplTti10T0
Managed Object

3GPP Name
PLnon-max; Puncture Limit
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the E-DCH Puncture Limitation (EPL)

when the UE is configured with 10 ms E-TTI and E-TFCI table0.
This parameter limits the amount of puncturing that is applied to
avoid multicode transmission or to use a higher spreading factor.
The actually-allowed puncturing in % is (1-EPL)*100.
Instance
RNC
ZWF26-02-003
(44..100)%, step 4%
Unit
Default Value
64
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-722
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the E-DCH Puncture
Limitation (EPL) when the UE is configured with 10 ms E-TTI and

E-TFCI table0.
system.
If this parameter is set to a greater value, the actual puncturing
percentage is smaller, and the uplink transmitting power is greater.
This generates unnecessary interference, and affects the uplink
capacity.
If this parameter is set to a smaller value, the actual puncturing
percentage is greater, and the uplink transmitting power is smaller.
This affects the service quality.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eplTti10T1
Managed Object

3GPP Name
2-723
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
RNC
ZWF26-02-003
(44..100)%, step 4%
Unit
Default Value
64
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

E-TFCI table1.
system.
capacity.
Reason
Change Take Effect
New Connection
No
2-724
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eplTti2T0
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

when the UE is configured with 2 ms E-TTI and E-TFCI table0. This
parameter limits the amount of puncturing that is applied to avoid
multicode transmission or to use a higher spreading factor. The
actually-allowed puncturing in % is (1-EPL)*100.
Instance
RNC
ZWF26-02-003
(44..100)%, step 4%
Unit
Default Value
56
Related Parameters
N/A
N/A
Parameters
2-725
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

E-TFCI table0.
system.
capacity.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eplTti2T1
Managed Object

2-726
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
RNC
ZWF26-02-003
(44..100)%, step 4%
Unit
Default Value
56
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

E-TFCI table1.
system.
capacity.
Reason
Change Take Effect
New Connection
2-727
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.10 E-DCH in CELL_DCH State

Profile(UEdchRcDchProfile)
2.10.1 E-DCH in CELL_DCH State Profile Object ID
Full Name
E-DCH in CELL_DCH State Profile Object ID
Abbreviated Name
UEdchRcDchProfileId
Managed Object
E-DCH in CELL_DCH State Profile(UEdchRcDchProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the E-DCH in CELL_DCH

state profile.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-728
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->E-DCH in CELL_DCH State
Profile
N/A
N/A
2.10.2 E-DCH in CELL_DCH State Profile ID

Full Name
E-DCH in CELL_DCH State Profile ID
Abbreviated Name
profileId
Managed Object
E-DCH in CELL_DCH State Profile(UEdchRcDchProfile)

3GPP Name
N/A
3GPP Reference
N/A
2-729
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the E-DCH reference configuration index

for an HSUPA service. The E-DCH reference configuration points to
a set of configurations for the E-DCH Puncture Limitation, Number of
Reference E-TFCI, Indication of Reference E-TFCIs, and Reference
E-TFCI PO parameters, all these parameters are configured for
combinations of E-TTIs and E-TFCI tables.
Instance
Service Related
ZWF25-04-006
1.. MAX_NUM_EDCH_REFCONFIG_INDEX
where, MAX_NUM_EDCH_REFCONFIG_INDEX =50
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the E-DCH reference configuration
index.
Related factor: The value of this parameter varies with E-DCH
reference configurations.
Adjustment suggestion: This parameter is a primary key and cannot
be modified.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Restricted
2-730
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Profile
N/A
N/A
2.11 E-DCH in CELL_DCH State

Configuration(UEdchRcDch)
2.11.1 E-DCH in CELL_DCH State Configuration Object ID
Full Name
E-DCH in CELL_DCH State Configuration Object ID
Abbreviated Name
UEdchRcDchId
Managed Object
E-DCH in CELL_DCH State Configuration(UEdchRcDch)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the E-DCH in CELL_DCH

state configuration.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-731
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Profile->E-DCH in CELL_DCH State Configuration
N/A
N/A

Full Name
Abbreviated Name
eplTti2T0
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
2-732
SJ-20141209142030-013|2015-11-12 (R1.3)
(44..100)%, step 4%
Unit
Default Value
56
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

E-TFCI table0.
system.
capacity.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-733
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
eplTti2T1
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
(44..100)%, step 4%
Unit
Default Value
56
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-734
SJ-20141209142030-013|2015-11-12 (R1.3)

E-TFCI table1.
system.
capacity.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
eplTti10T0
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-735
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF25-04-006
(44..100)%, step 4%
Unit
Default Value
64
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

E-TFCI table0.
system.
capacity.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
2-736
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
eplTti10T1
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
(44..100)%, step 4%
Unit
Default Value
64
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-737
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

E-TFCI table1.
system.
capacity.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
eplTti2T2
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-738
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
(44..100)%, step 4%
Unit
Default Value
44
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

E-TFCI table2.
system.
capacity.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
2-739
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
eplTti2T3
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
(44..100)%, step 4%
Unit
Default Value
56
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-740
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

E-TFCI table3.
system.
capacity.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti2T0
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-741
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

E-TFCI table0.
system.
in an E-TFCI table.
greater.
smaller.
2-742
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfciTti2T0
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
2-743
SJ-20141209142030-013|2015-11-12 (R1.3)
0..127
Unit
N/A
Default Value
[1, 26, 39, 45, 51, 70, 79, 122]
Related Parameters
rEtfcNumTti2T0
Parameters

the array must be different. At least one value which is not larger
than 113 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

table0.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-744
SJ-20141209142030-013|2015-11-12 (R1.3)

Table0)
Full Name
Abbreviated Name
rEtfciPOTti2T0
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[9, 12, 13, 13, 13, 12, 13, 16]
Related Parameters
rEtfcNumTti2T0
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-745
SJ-20141209142030-013|2015-11-12 (R1.3)

and E-TFCI table0.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti2T1
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-746
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

E-TFCI table1.
system.
in an E-TFCI table.
greater.
smaller.
2-747
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfciTti2T1
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
2-748
SJ-20141209142030-013|2015-11-12 (R1.3)
0..125
Unit
N/A
Default Value
[1, 3, 16, 28, 36, 54, 62, 109]
Related Parameters
rEtfcNumTti2T1
Parameters

than 85 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

table1.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-749
SJ-20141209142030-013|2015-11-12 (R1.3)

Table1)
Full Name
Abbreviated Name
rEtfciPOTti2T1
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[11, 12, 14, 15, 12, 13, 12, 17]
Related Parameters
rEtfcNumTti2T1
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-750
SJ-20141209142030-013|2015-11-12 (R1.3)

and E-TFCI table1.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti10T0
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-751
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table0.
system.
in an E-TFCI table.
greater.
smaller.
2-752
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfciTti10T0
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
2-753
SJ-20141209142030-013|2015-11-12 (R1.3)
0..127
Unit
N/A
Default Value
[1, 12, 48, 60, 77, 88]
Related Parameters
rEtfcNumTti10T0
Parameters

in the array must be different. At least one value which is not larger
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

table0.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-754
SJ-20141209142030-013|2015-11-12 (R1.3)

Table0)
Full Name
Abbreviated Name
rEtfciPOTti10T0
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[3, 6, 12, 13, 15, 16]
Related Parameters
rEtfcNumTti10T0
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-755
SJ-20141209142030-013|2015-11-12 (R1.3)

and E-TFCI table0.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti10T1
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-756
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table1.
system.
in an E-TFCI table.
greater.
smaller.
2-757
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfciTti10T1
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
2-758
SJ-20141209142030-013|2015-11-12 (R1.3)
0..120
Unit
N/A
Default Value
[0, 1, 5, 14, 41, 56, 72, 98]
Related Parameters
rEtfcNumTti10T1
Parameters

than 54 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

table1.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-759
SJ-20141209142030-013|2015-11-12 (R1.3)

Table1)
Full Name
Abbreviated Name
rEtfciPOTti10T1
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[0, 6, 8, 11, 13, 15, 14, 16]
Related Parameters
rEtfcNumTti10T1
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-760
SJ-20141209142030-013|2015-11-12 (R1.3)

and E-TFCI table1.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti2T2
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-761
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

E-TFCI table2.
system.
in an E-TFCI table.
greater.
smaller.
2-762
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfciTti2T2
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
2-763
SJ-20141209142030-013|2015-11-12 (R1.3)
0..127
Unit
N/A
Default Value
[0, 1, 20, 40, 60 , 80, 110, 127]
Related Parameters
rEtfcNumTti2T2, edchRefConfigIdx, etfciBstTti2T2, rEtfciPOTti2T2
Parameters

than 98 must exist.
When the edchRefConfigIdx parameter is the same, the
corresponding rEtfciPOTti2T2[n] of the element in rEtfciTti2T2[]
which is less than or equal to etfciBstTti2T2 must be less than or
equal to 29.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

table2.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-764
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Table2)
Full Name
Abbreviated Name
rEtfciPOTti2T2
Managed Object

3GPP Name
Reference E-TFCI PO
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
0..31
Unit
N/A
Default Value
[0, 2, 5, 10, 15, 20, 25, 30]
Related Parameters
rEtfcNumTti2T2, edchRefConfigIdx, rEtfciTti2T2, etfciBstTti2T2
Parameters

When the edchRefConfigIdx parameter is the same and
rEtfciTti2T2[n] is less than or equal to etfciBstTti2T2, the
corresponding rEtfciPOTti2T2[n] value must be less than or equal to
29.
Data Type
2-765
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table2.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfcNumTti2T3
Managed Object

3GPP Name
N/A
2-766
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

E-TFCI table3.
system.
in an E-TFCI table.
greater.
2-767
SJ-20141209142030-013|2015-11-12 (R1.3)

smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rEtfciTti2T3
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
2-768
SJ-20141209142030-013|2015-11-12 (R1.3)
16QAM for HSUPA FG
0..124
Unit
N/A
Default Value
[1, 35, 51, 76, 96, 112, 115]
Related Parameters
rEtfcNumTti2T3, edchRefConfigIdx, etfciBstTti2T3, rEtfciPOTti2T3
Parameters

than 62 must exist.
equal to 29.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

table3.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-769
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Table3)
Full Name
Abbreviated Name
rEtfciPOTti2T3
Managed Object

3GPP Name
Reference E-TFCI PO
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
0..31
Unit
N/A
Default Value
[12, 10, 6, 12, 16, 20, 21]
Related Parameters
Parameters

When the edchRefConfigIdx parameter is the same and
rEtfciTti2T3[n] is less than or equal to etfciBstTti2T3, the
corresponding rEtfciPOTti2T3[n] value must be less than or equal to
29.
2-770
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

and E-TFCI table3.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.11.26 E-TFCIboost for 2ms E-TTI Table2

Full Name
E-TFCIboost for 2ms E-TTI Table2
Abbreviated Name
etfciBstTti2T2
Managed Object

3GPP Name
E-TFCI BetaEC Boost; E-TFCI boost
2-771
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the E-TFCI threshold used for the selection
of quantization of amplitude ratio table for E-DPCCH power offset
when the UE is configured with 2 ms E-TTI and E-TFCI table2,
beyond which boosting of E-DPCCH is enabled
Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
0..127
Unit
N/A
Default Value
110
Related Parameters
edchRefConfigIdx, rEtfciTti2T2, rEtfciPOTti2T2
Parameters

equal to 29.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the E-TFCI threshold
used for the selection of quantization of amplitude ratio table for

E-DPCCH power offset when the UE is configured with 2 ms E-TTI
and E-TFCI table2, beyond which boosting of E-DPCCH is enabled.
Related factors: the E-DCH service quality and cell uplink capacity.
If the parameter is too big, it will affect the pilot quality of some high
rate services, and affect the throughput.
If the parameter is too small, it will waste the UE power, increase the
uplink interference.
Reason
Change Take Effect
New Connection
No
2-772
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
etfciBstTti2T3
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the E-TFCI threshold used for selecting

the extended quantization table for the E-DPCCH power offset
When the E-TFCI exceeds this threshold, the extended quantization
table is used.
Instance
Service Related
ZWF26-01-004
16QAM in HSUPA
16QAM for HSUPA FG
0..127
Unit
N/A
Default Value
35
Related Parameters
edchRefConfigIdx, rEtfciTti2T3, rEtfciPOTti2T3
Parameters

equal to 29.
Data Type
long
2-773
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
used for selecting the extended quantization table for the E-DPCCH
power offset when the UE is configured with 2 ms E-TTI and E-TFCI
table3. When the E-TFCI exceeds this threshold, the extended
quantization table is used.
system.
If this parameter is set to a greater value, the quality of pilot
frequency for some high-speed services is affected, and the
throughput is affected. If this parameter is set to a smaller value,
uplink power and interference are increased.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.11.28 Number of Reference E-TFCI (2ms E-TTI, E-TFCI Table0,

QPSK Interpolation)
Full Name
Number of Reference E-TFCI (2ms E-TTI, E-TFCI Table0, QPSK

Interpolation)
Abbreviated Name
rEtfcNum2T0QIp
Managed Object

2-774
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the number of reference E-TFCIs when 2

ms E-TTI, E-TFCI table0, QPSK and interpolation are used. The
each E-TFC. For details, refer to TS25.214.
Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
ms E-TTI, E-TFCI table0, QPSK and interpolation are used.

system.
in an E-TFCI table.
greater.
2-775
SJ-20141209142030-013|2015-11-12 (R1.3)

smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Interpolation)
Full Name
Set of Reference E-TFCIs (2ms E-TTI, E-TFCI Table0, QPSK

Interpolation)
Abbreviated Name
rEtfci2T0QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates a set of reference E-TFCIs when 2 ms

E-TTI, E-TFCI table0, QPSK and interpolation are used. The UE
uses the configured reference E-TFCI and the power offset to
value is 8.
Instance
Service Related
2-776
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF25-04-006
0..127
Unit
N/A
Default Value
[1, 13, 64, 102, 114, 122, 123]
Related Parameters
rEtfcNum2T0QIp
Parameters
by the rEtfcNum2T0QIp parameter, and the values of the elements

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates a set of reference
E-TFCIs when 2 ms E-TTI, E-TFCI table0, QPSK and interpolation

are used.
Related factor: The number of elements in the rEtfciTti2T3 array is
determined by the fEtfcNumTti2T3 parameter. The power of an
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-777
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Table0, QPSK Interpolation)
Full Name
Power Offset of Reference E-TFCIs (2ms E-TTI, E-TFCI Table0,

QPSK Interpolation)
Abbreviated Name
rEtfcPO2T0QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset of reference E-TFCIs

when 2 ms E-TTI, E-TFCI table0, QPSK and interpolation are
used. The UE uses the configured reference E-TFCI and the
power offset to calculate the quantized value ed of the E-DPDCH
power factor for each E-TFC. For details, refer to TS25.214. The
MAX_REF_ETFC parameter is the maximum number of reference
E-TFCs, and the value is 8.
Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[12, 12, 12, 10, 13, 15, 16]
Related Parameters
rEtfcNum2T0QIp
Parameters

Data Type
Parameter Type
Negotiation With CN
No
2-778
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
reference E-TFCIs when 2 ms E-TTI, E-TFCI table0, QPSK and

interpolation are used.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

QPSK Interpolation)
Full Name

Interpolation)
Abbreviated Name
rEtfcNum2T1QIp
Managed Object

3GPP Name
N/A
2-779
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

system.
in an E-TFCI table.
greater.
2-780
SJ-20141209142030-013|2015-11-12 (R1.3)

smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Interpolation)
Full Name

Interpolation)
Abbreviated Name
rEtfci2T1QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
2-781
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF25-04-006
0..125
Unit
N/A
Default Value
[1, 16, 62, 85, 106, 109]
Related Parameters
rEtfcNum2T1QIp
Parameters

than 85 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

are used.
determined by the rEtfcNumTti2T3 parameter. The power of an
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-782
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name

QPSK Interpolation)
Abbreviated Name
rEtfcPO2T1QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[12, 12, 10, 12, 15, 16]
Related Parameters
rEtfcNum2T1QIp
Parameters

Data Type
Parameter Type
Negotiation With CN
No
2-783
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

QPSK Interpolation)
Full Name

Interpolation)
Abbreviated Name
rEtfcNum10T0QIp
Managed Object

3GPP Name
N/A
2-784
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

system.
in an E-TFCI table.
greater.
2-785
SJ-20141209142030-013|2015-11-12 (R1.3)

smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.11.35 Set of Reference E-TFCIs (10ms E-TTI, E-TFCI Table0,

QPSK Interpolation)
Full Name

Interpolation)
Abbreviated Name
rEtfci10T0QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
2-786
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF25-04-006
0..127
Unit
N/A
Default Value
[1, 12, 48, 60, 77, 88]
Related Parameters
rEtfcNum10T0QIp
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

are used.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-787
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name

QPSK Interpolation)
Abbreviated Name
rEtfcPO10T0QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[3, 6, 12, 13, 15, 16]
Related Parameters
rEtfcNum10T0QIp
Parameters

Data Type
Parameter Type
Negotiation With CN
No
2-788
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

QPSK Interpolation)
Full Name

Interpolation)
Abbreviated Name
rEtfcNum10T1QIp
Managed Object

3GPP Name
N/A
2-789
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

system.
in an E-TFCI table.
greater.
2-790
SJ-20141209142030-013|2015-11-12 (R1.3)

smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.11.38 Set of Reference E-TFCIs (10ms E-TTI, E-TFCI Table1,

QPSK Interpolation)
Full Name

Interpolation)
Abbreviated Name
rEtfci10T1QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

value is 8.
Instance
Service Related
2-791
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF25-04-006
0..120
Unit
N/A
Default Value
[1, 5, 19, 41, 55, 71, 98]
Related Parameters
rEtfcNum10T1QIp
Parameters

than 54 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

are used.
determined by the rEtfcNumTti2T3 parameter. The power of an
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-792
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name

QPSK Interpolation)
Abbreviated Name
rEtfcPO10T1QIp
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF25-04-006
0..29
Unit
N/A
Default Value
[3, 6, 11, 13, 15, 13, 14]
Related Parameters
rEtfcNum10T1QIp
Parameters

Data Type
Parameter Type
Negotiation With CN
No
2-793
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
etfciBstTti2T0
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.433
2-794
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the E-TFCI threshold when 2ms E-TTI

and E-TFCI table0 are used for selecting the extended quantization
table for the E-DPCCH power offset. When the E-TFCI exceeds this
threshold and QPSK boosting is used, the extended quantization
table is used.
Instance
Service Related
ZWF25-04-006
0..127
Unit
N/A
Default Value
102
Related Parameters
UEdchRcDchProfile.profileId, rEtfci2T0Qb, rEtfcPO2T0Qb
Under the same UEdchRcDchProfile.profileId parameter, the
Parameters
corresponding rEtfcPO2T0Qb[n] of the element in rEtfci2T0Qb[]

equal to 29.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
when 2ms E-TTI and E-TFCI table0 are used for selecting the
extended quantization table for the E-DPCCH power offset. When
the E-TFCI exceeds this threshold, the extended quantization table
is used.
system.
Reason
Change Take Effect
New Connection
No
2-795
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
etfciBstTti2T1
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the E-TFCI threshold when 2ms E-TTI

and E-TFCI table0 are used for selecting the extended quantization
table for the E-DPCCH power offset. When the E-TFCI exceeds this
threshold and QPSK boosting is used, the extended quantization
table is used.
Instance
Service Related
ZWF25-04-006
0..125
Unit
N/A
Default Value
62
Related Parameters
UEdchRcDchProfile.profileId, rEtfci2T1Qb, rEtfcPO2T1Qb
Under the same UEdchRcDchProfile.profileId parameter, the
Parameters
corresponding rEtfcPO2T1Qb[n] of the element in rEtfci2T1Qb[]

equal to 29.
Data Type
long
2-796
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
when 2ms E-TTI and E-TFCI table0 are used for selecting the
extended quantization table for the E-DPCCH power offset. When
the E-TFCI exceeds this threshold, the extended quantization table
is used.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

QPSK Boosting)
Full Name

Boosting)
Abbreviated Name
rEtfcNum2T0Qb
Managed Object

2-797
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the number of reference E-TFCIs when

2ms E-TTI, E-TFCI table0, QPSK and Boosting are used. The
Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
reference E-TFCIs when 2ms E-TTI, E-TFCI table0, QPSK and

Boosting are used.
system.
in an E-TFCI table.
greater.
2-798
SJ-20141209142030-013|2015-11-12 (R1.3)

smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Boosting)
Full Name

Boosting)
Abbreviated Name
rEtfci2T0Qb
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-799
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the set of reference E-TFCIs when 2ms

E-TTI, E-TFCI table0, QPSK and Boosting are used. The UE uses
value is 8.
Instance
Service Related
ZWF25-04-006
0..127
Unit
N/A
Default Value
[1, 64, 102, 114, 122, 123, 127]
Related Parameters
rEtfcNum2T0Qb, UEdchRcDchProfile.profileId, rEtfcPO2T0Qb,

etfciBstTti2T0
Parameters
by the rEtfcNum2T0Qb parameter, and the values of the elements

Under the same UEdchRcDchProfile.profileId, the corresponding
rEtfcPO2T0Qb[n] of the element in rEtfci2T0Qb[] which is less than
or equal to etfciBstTti2T0 must be less than or equal to 29.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the set of reference
E-TFCIs when 2ms E-TTI, E-TFCI table0, QPSK and Boosting are
used.
Related factor: The power of an E-TFCI is calculated most
accurately based on the reference E-TFCI with the same SF.
Therefore, ensure that the values of reference E-TFCIs are retrieved
at the SF changing point in an E-TFCI table.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
2-800
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Table0, QPSK Boosting)
Full Name

QPSK Boosting)
Abbreviated Name
rEtfcPO2T0Qb
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

when 2ms E-TTI, E-TFCI table0, QPSK and Boosting are used. The
value is 8.
Instance
Service Related
ZWF25-04-006
0..31
2-801
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
[12, 12, 10, 8, 13, 14, 20]
Related Parameters
rEtfcNum2T0Qb, UEdchRcDchProfile.profileId, rEtfci2T0Qb,

etfciBstTti2T0
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

Boosting are used.
system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-802
SJ-20141209142030-013|2015-11-12 (R1.3)

QPSK Boosting)
Full Name

Boosting)
Abbreviated Name
rEtfcNum2T1Qb
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the number of reference E-TFCIs when

2ms E-TTI, E-TFCI table1, QPSK and Boosting are used. The
Instance
Service Related
ZWF25-04-006
1..MAX_REF_ETFC
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-803
SJ-20141209142030-013|2015-11-12 (R1.3)

Boosting are used.
system.
in an E-TFCI table.
greater.
smaller.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Boosting)
Full Name

Boosting)
Abbreviated Name
rEtfci2T1Qb
2-804
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the set of reference E-TFCIs when 2ms

E-TTI, E-TFCI table1, QPSK and Boosting are used. The UE uses
value is 8.
Instance
Service Related
ZWF25-04-006
0..125
Unit
N/A
Default Value
[1, 16, 62, 85, 106, 109, 125]
Related Parameters
rEtfcNum2T1Qb, UEdchRcDchProfile.profileId, rEtfcPO2T1Qb,

etfciBstTti2T1
Parameters

in the array must be different.At least one value which is not larger
than 85 must exist.
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-805
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the set of reference
E-TFCIs when 2ms E-TTI, E-TFCI table1, QPSK and Boosting are
used.
Related factors: The power of an E-TFCI is calculated most
accurately based on the reference E-TFCI with the same SF.
Therefore, ensure that the values of reference E-TFCIs are retrieved
at the SF changing point in an E-TFCI table.
calculation.
Reason
E-TFCI table.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Table1, QPSK Boosting)
Full Name

QPSK Boosting)
Abbreviated Name
rEtfcPO2T1Qb
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-806
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

when 2ms E-TTI, E-TFCI table1, QPSK and Boosting are used. The
value is 8.
Instance
Service Related
ZWF25-04-006
0..31
Unit
N/A
Default Value
[12, 12, 11, 9, 13, 14, 16]
Related Parameters

etfciBstTti2T1
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

Boosting are used.
system.
Reason
Change Take Effect
New Connection
2-807
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.11.48 Power Offset of Reference E-TFCIs for Macro-Micro Soft

Handover (2ms E-TTI,E-TFCI Table2)
Full Name
Power Offset of Reference E-TFCIs for Macro-Micro Soft Handover

(2ms E-TTI,E-TFCI Table2)
Abbreviated Name
rEtfciPOTti2T2MMSH
Managed Object

3GPP Name
Reference E-TFCI PO
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

during a macro-micro soft handover of a UE when the UE is
configured with 2 ms E-TTI and E-TFCI table2. The UE uses the
configured reference E-TFCI and the power offset to calculate the
quantized value ed of the E-DPDCH power factor for each E-TFC.
For details, refer to TS25.214. MAX_REF_ETFC is the maximum
number of reference E-TFCs and the value of it is 8.
Instance
Service Related
ZWF28-01-002
0..31
2-808
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
NA
Default Value
[0, 2, 5, 10, 15, 20, 25, 30]
Related Parameters
Parameters

In the UEdchRcDch array, for the same value of the
edchRefConfigIdx parameter, the rEtfciPOTti2T2MMSH[n]
corresponding to the elements in rEtfciTti2T2[] which are less than
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the power offset of the
reference E-TFCI for a UE in macro/small soft handover state when

the UE is configured with 2 ms E-TTI and E-TFCI table 2.
Related factors: E-DCH service quality, system uplink capacity.
The larger the parameter value is, the larger the reference E-TFCI
power is, the larger the uplink interference is, and the smaller the
system capacity is.
The smaller the parameter value is, the smaller the reference
E-TFCI power is, and the worse the service quality is.
Reason
the uplink capacity of the system.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-809
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name

Abbreviated Name
rEtfciPOTti2T3MMSH
Managed Object

3GPP Name
Reference E-TFCI PO
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF28-01-002
0..31
Unit
NA
Default Value
[12, 10, 6, 12, 16, 20, 21]
Related Parameters
Parameters

In the UEdchRcDch array, for the same value of the
edchRefConfigIdx parameter, the rEtfciPOTti2T3MMSH[n]
corresponding to the elements in rEtfciTti2T3[] which are less than
Data Type
BYTE
Parameter Type
Negotiation With CN
No
2-810
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No

system capacity is.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add

Full Name

Abbreviated Name
rEtfciPOTti10T0MMH
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-811
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF28-01-002
0..29
Unit
NA
Default Value
[3, 6, 12, 13, 15, 16]
Related Parameters
rEtfcNumTti10T0
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

system capacity is.
Reason
Change Take Effect
No
How to Impact
N/A
2-812
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
Add

Full Name

Abbreviated Name
rEtfciPOTti10T1MMH
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF28-01-002
0..29
Unit
NA
Default Value
[0,6,8,11,13,15,14,16]
Related Parameters
rEtfcNumTti10T1
2-813
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

system capacity is.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add

Full Name

Abbreviated Name
rEtfciPOTti2T0MMSH
2-814
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF28-01-002
0..29
Unit
NA
Default Value
[9, 12, 13, 13, 13, 12, 13, 16]
Related Parameters
rEtfcNumTti2T0
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

system capacity is.
2-815
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add

Full Name

Abbreviated Name
rEtfciPOTti2T1MMSH
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

Instance
Service Related
ZWF28-01-002

2-816
SJ-20141209142030-013|2015-11-12 (R1.3)
0..29
Unit
NA
Default Value
[11,12,14,15,12,13,12,17]
Related Parameters
rEtfcNumTti2T1
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

system capacity is.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-817
SJ-20141209142030-013|2015-11-12 (R1.3)

Handover (2ms E-TTI,E-TFCI Table0,QPSK Interpolation)
Full Name

(2ms E-TTI,E-TFCI Table0,QPSK Interpolation)
Abbreviated Name
rEtfcPO2T0QIpMMSH
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset of the reference

E-TFCI during a macro-micro soft handover of a UE when the
UE is configured with 2 ms E-TTI and E-TFCI table0, and QPSK
modulation and interpolation are used. The UE uses the configured
reference E-TFCI and the power offset to calculate the quantized
value ed of the E-DPDCH power factor for each E-TFC. For details,
refer to TS25.214. MAX_REF_ETFC is the maximum number of
reference E-TFCs and the value of it is 8.
Instance
Service Related
ZWF28-01-002
0..29
Unit
NA
Default Value
[12, 12, 12, 10, 13, 15, 16]
Related Parameters
rEtfcNum2T0QIp
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-818
SJ-20141209142030-013|2015-11-12 (R1.3)

the UE is configured with 2 ms E-TTI, E-TFCI table 0, QPSK, and
interpolation.
system capacity is.
Reason
Change Take Effect
No
How to Impact
N/A
Access
N/A
OMC Access path
Add

Full Name

Abbreviated Name
rEtfcPO2T1QIpMMSH
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-819
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF28-01-002
0..29
Unit
NA
Default Value
[12, 12, 10, 12, 15, 16]
Related Parameters
rEtfcNum2T1QIp
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the power offset of the
reference E-TFCI during a macro-micro soft handover of a UE when

the UE is configured with 2 ms E-TTI and E-TFCI table1, and QPSK
modulation and interpolation are used.
system
A greater value indicates a higher reference E-TFCI power, greater
uplink interference, and lower system capacity.
A smaller value indicates a lower reference E-TFCI power and
worse service quality.
Reason
Change Take Effect
No
2-820
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
N/A
OMC Access path
Add

Full Name

Abbreviated Name
rEtfcPO10T0QIpMMSH
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

configured with 10 ms E-TTI and E-TFCI table0, and QPSK
Instance
Service Related
ZWF28-01-002
0..29
Unit
NA
Default Value
[3, 6, 12, 13, 15, 16]

2-821
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
rEtfcNum10T0QIp
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
N/A
the reference E-TFCI during a macro-micro soft handover of a UE

when the UE is configured with 10 ms E-TTI and E-TFCI table0, and
QPSK modulation and interpolation are used.
system
Reason
Change Take Effect
No
How to Impact
N/A
Access
N/A
OMC Access path
Add

2-822
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name

Abbreviated Name
rEtfcPO10T1QIpMMSH
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

configured with 10 ms E-TTI and E-TFCI table1, and QPSK
Instance
Service Related
ZWF28-01-002
0..29
Unit
NA
Default Value
[3, 6, 11, 13, 15, 13, 14]
Related Parameters
rEtfcNum10T1QIp
Parameters

Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-823
SJ-20141209142030-013|2015-11-12 (R1.3)
the reference E-TFCI during a macro-micro soft handover of a UE

when the UE is configured with 10 ms E-TTI and E-TFCI table1, and
QPSK modulation and interpolation are used.
system
Reason
Change Take Effect
No
How to Impact
N/A
Access
N/A
OMC Access path
Add

Handover (2ms E-TTI,E-TFCI Table0,QPSK Boosting)
Full Name

(2ms E-TTI,E-TFCI Table0,QPSK Boosting)
Abbreviated Name
rEtfcPO2T0QbMMSH
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-824
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

modulation and Boosting are used. The UE uses the configured
Instance
Service Related
ZWF28-01-002
0..31
Unit
NA
Default Value
[12,12,10,8,13,14,20]
Related Parameters

etfciBstTti2T0
Parameters

For the same value of UEdchRcDchProfile.profileId, the
rEtfcPO2T0QbMMSH[n] corresponding to the elements in
rEtfci2T0Qb[] which are less than or equal to etfciBstTti2T0 must be
less than or equal to 29.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

modulation and Boosting are used.
system
2-825
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
N/A
OMC Access path
Add

Handover (2ms E-TTI,E-TFCI Table1,QPSK Boosting)
Full Name

(2ms E-TTI,E-TFCI Table1,QPSK Boosting)
Abbreviated Name
rEtfcPO2T1QbMMSH
Managed Object

3GPP Name
Reference E-TFCI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

modulation and Boosting are used. The UE uses the configured
Instance
Service Related
ZWF28-01-002
2-826
SJ-20141209142030-013|2015-11-12 (R1.3)
0..31
Unit
NA
Default Value
[1212119131416]
Related Parameters

etfciBstTti2T1
Parameters

For the same value of UEdchRcDchProfile.profileId, the
rEtfcPO2T1QbMMSH[n] corresponding to the elements in
rEtfci2T1Qb[] which are less than or equal to etfciBstTti2T1 must be
less than or equal to 29.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No

modulation and Boosting are used.
system
Reason
Change Take Effect
No
How to Impact
N/A
Access
N/A
2-827
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Add
2.12 Location Area Configuration (ULocationArea)

2.12.1 Location Area Configuration Object ID
Full Name
Location Area Configuration Object ID
Abbreviated Name
ULocationAreaId
Managed Object
Location Area Configuration (ULocationArea)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the Location Area

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-828
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Location Information Configuration->Location Area Configuration
N/A
N/A
2.12.2 Location Area Code

Full Name
Location Area Code
Abbreviated Name
lac
Managed Object
Location Area Configuration (ULocationArea)

3GPP Name
LAC; Location Area Code
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the code of the location area where a cell
is located.
To locate where an MS is, the areas covered by a PLMN are divided
into multiple location areas that are identified by Location Area
Codes (LACs). An LAC is a part of an LAI (that is, LAI = MCC +
MNC + LAC). There are multiple cells within a location area.
Instance
UTRAN Cell
N/A
N/A
Basic Parameter
1..0xfffd, 0xffff
2-829
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
N/A
Related Parameters
MCC of utranCell, MNC of utranCell, LAC of utranCell
LAI = MCC + MNC + LAC
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: network planning and optimization parameter,
location area code.

Related factor: network deployment of an operator.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.13 Routing Area Configuration (URoutingArea)

2.13.1 Routing Area Configuration Object ID
Full Name
Routing Area Configuration Object ID
Abbreviated Name
URoutingAreaId
Managed Object
Routing Area Configuration (URoutingArea)

3GPP Name
N/A
2-830
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the object ID of the Routing Area

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
->Routing Area Configuration
N/A
N/A
2-831
SJ-20141209142030-013|2015-11-12 (R1.3)
2.13.2 Routing Area Code

Full Name
Routing Area Code
Abbreviated Name
rac
Managed Object
Routing Area Configuration (URoutingArea)

3GPP Name
RAC; Routing Area Code
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the code of the routing area where a cell is
located. It is valid only when PS services are supported. A Routing
Area Code (RAC) identifies a routing area within a location area in a
PLMN of GSM-MAP type. It is used in packet services. An RAC is a
part of an RAI (that is, RAI = PLMN-ID + LAC + RAC). An RAC is
set by an operator through the RNC O&M.
Instance
UTRAN Cell
N/A
N/A
Basic Parameter
0..255
Unit
N/A
Default Value
N/A
Related Parameters
MCC of utranCell, MNC of utranCell, LAC of utranCell, RAC of

utranCell
RAI = MCC + MNC + LAC+ RAC
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
routing area code.

N/A
Reason
2-832
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
->Routing Area Configuration
N/A
N/A
2.14 Service Area Configuration in CS+PS

Domain(UServiceArea)
2.14.1 Service Area Configuration in CS+PS Domain Object ID
Full Name
Service Area Configuration in CS+PS Domain Object ID
Abbreviated Name
UServiceAreaId
Managed Object
Service Area Configuration in CS+PS Domain(UServiceArea)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the CS+PS Domain

Service Area configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-833
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
->Service Area Configuration in CS+PS Domain
N/A
N/A
2.14.2 Service Area Code

Full Name
Service Area Code
Abbreviated Name
sac
Managed Object
Service Area Configuration in CS+PS Domain(UServiceArea)

3GPP Name
SAC; Service Area Code
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
2-834
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the CS + PS domain service area code.

Service area code uniquely identifies one or several cells belonging
to the same Location Are (LA). Service area code indicates the UE
location for CN. SAC belongs to SAI (SAI = PLMN-ID + LAC + SAC).
SAC is set by the operator via RNC O&M. One cell may belong to
one or two SACs: One is CS + PS domain SAC and the other is BC
domain SAC. One of them must be CS + PS domain SAC.
Instance
RNC
N/A
N/A
Basic ID parameter
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Function: Service area code for CS and PS domain
Configuration Rule: This parameter should be set according to

network deployment.
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
->Service Area Configuration in CS+PS Domain
N/A
2-835
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.15 Service Area Configuration in BC

Domain(UServiceAreaBc)
2.15.1 Service Area Configuration in BC Domain Object ID
Full Name
Service Area Configuration in BC Domain Object ID
Abbreviated Name
UServiceAreaBcId
Managed Object
Service Area Configuration in BC Domain(UServiceAreaBc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the BC Domain Service

Area configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
2-836
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
->Service Area Configuration in BC Domain
N/A
N/A
2.15.2 Service Area Code for BC Domain

Full Name
Service Area Code for BC Domain
Abbreviated Name
sacbc
Managed Object
Service Area Configuration in BC Domain(UServiceAreaBc)

3GPP Name
3GPP Reference
TS 25.419;
TS 23.003
Description
This parameter indicates the Service Area Code (SAC) for the
BC domain that the cell is referenced. This parameter should be
configured if the cell supports the Cell Broadcast Service (CBS).
Otherwise, it is not necessary.
An SACPC uniquely identifies one or multiple cells that belong to
the same Location Area (LA). An SAC indicates the UE location for
the Core Network (CN). An SAC is a part of an SAI (that is, SAI =
PLMN-ID + LAC + SAC). The SAC is set by an operator through the
RNC O&M. A cell can belong to one or two SAs, corresponding to
one or two SACs respectively. If a cell belongs to two SAs, one
SAC is used in the BC domain and the other in the CS+PS domain.
If a cell belongs to one SA, the SAC must be used in the CS+PS
domain. The SA of the BC domain contains only one cell.
Instance
RNC
ZWF21-02-025
2-837
SJ-20141209142030-013|2015-11-12 (R1.3)
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: network planning and optimization parameter.
This parameter should be configured if the cell supports the CBS.

N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
->Service Area Configuration in BC Domain
N/A
N/A
2.16 Logic RNC Configuration(ULogicalRnc)

2.16.1 Logic RNC Configuration Object ID
Full Name
Logic RNC Configuration Object ID
2-838
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
ULogicalRncId
Managed Object
Logic RNC Configuration(ULogicalRnc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the logical RNC

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->Logic RNC Configuration
N/A
N/A
2-839
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.2 AMR Rate Adjustment Switch for RNC

Full Name
AMR Rate Adjustment Switch for RNC
Abbreviated Name
amrRncAdjust
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether AMR rate adjustment is supported

in the RNC.
Instance
RNC and PLMN
ZWF21-04-005

0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
Yes
Function: This parameter indicates whether AMR rate adjustment
is supported or not.
Configuration: If the multi-rate AMR are supported and the CS
voices traffic load is very high, for example DPCH no code is
frequently took place, that dynamic AMR rate adjustment could
effectively reduce the system load, the function should be open.
Usually, the benefit of AMR rate adjustment for the capacity is not
Reason
so great.
Change Take Effect
New Connection
No
2-840
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.3 Switch for QoS Negotiation/Renegotiation

Full Name
Switch for QoS Negotiation/Renegotiation
Abbreviated Name
qosNegRenegSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the QoS negotiation during RAB

establishment or relocation and the QoS renegotiation during the
conversation after the service is established are permitted by the
RNC. If QoS negotiation is allowed, during RAB establishment or
relocation RNC will negotiate MBR and GBR to the approviate rate
level according to the method set by CN. If Qos renegotiation is
allowed, RNC can initiate adjusting MBR or GBR according to the
radio resource condition. The value of the parameter can be set as
allowing both or not allowing either, or only allowing one of the two,
which are set according to the requirement of the operator.
Instance
RNC
ZWF21-05-020
RAB Negotiation & Re-negotiation
RAB Negotiation & Re-negotiation FG
0: Switch Off QoS Negotiation, Switch Off QoS Renegotiation

1: Switch Off QoS Negotiation, Switch On QoS Renegotiation
2: Switch On QoS Negotiation, Switch Off QoS Renegotiation
3: Switch On QoS Negotiation, Switch On QoS Renegotiation
Unit
N/A
2-841
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Switch Off QoS Negotiation, Switch Off QoS Renegotiation
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether the QoS negotiation
during RAB establishment or relocation and the QoS renegotiation

during the conversation after the service is established are permitted
by the RNC.
Configuration Rule: The open or close of RAB QoS
negotiation/renegotiation depends on the demand of operator.
By default RAB QoS negotiation/renegotiation are all closed which
Reason
should be adjusted according to the demand of operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.4 MR Function Switch

Full Name
MR Function Switch
Abbreviated Name
mrSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-842
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the switch for the MRR acquisition function.
If it is set to "1" (On), the RNC supports the MRR acquisition
function. If it is set to "0" (Off), the RNC does not support the MRR
acquisition function.
Instance
RNC and PLMN
ZWF21-20-014
Measurement Report(MR) Data Report
Measurement Report(MR) Data Report FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
switch for the MRR function.

allows the MRR acquisition service to be provided. The MRR
acquisition function may influence the RNC system performance
to some extent.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-843
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.16.5 Integrity Protection Algorithm (UIA1)

Full Name
Integrity Protection Algorithm (UIA1)
Abbreviated Name
integrityAlgUIA1
Managed Object

3GPP Name
Integrity protection algorithm; Integrity Protection Algorithm
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter indicates a switch that controls whether the RNC

supports the integrity protection algorithm UIA1.
Instance
RNC and PLMN
ZWF21-01-006
Integrity Protection
0: Not Supported UIA1

1: Supported UIA1
Unit
N/A
Default Value
1: Supported UIA1
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
2-844
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter controls whether the RNC

Related factors: integrity requirements of operators.
Configuration rule: UIA1 indicates that the integrity algorithm 1 is
offered.
This parameter is an interconnection parameter, which must be
configured by negotiating with CN.
The default value is UIA1, which is a general configuration on
Reason
sites. You can configure this parameter based on the integrity

requirements of operators.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.6 Integrity Protection Algorithm (UIA2)

Full Name
Integrity Protection Algorithm (UIA2)
Abbreviated Name
integrityAlgUIA2
Managed Object

3GPP Name
Integrity protection algorithm; Integrity Protection Algorithm
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter indicates a switch that controls whether the RNC

Instance
RNC and PLMN
ZWF21-01-026/ZWF21-01-006
Integrity Protection Algorithm UIA2/Integrity Protection
2-845
SJ-20141209142030-013|2015-11-12 (R1.3)
UEA2 and UIA2 FG/Connection Management FG

1: Supported UIA2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter controls whether the RNC

Related factors: integrity requirements of operators.
Configuration rule: UIA2 indicates that the integrity algorithm 2 is
offered.
This parameter is an interconnection parameter, which must be
configured by negotiating with CN.
The default value is not UIA2, which is a general configuration on
Reason
sites. You can configure this parameter based on the integrity

requirements of operators.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.7 Encryption Algorithm (UEA0)

2-846
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Encryption Algorithm (UEA0)
Abbreviated Name
encryAlgUEA0
Managed Object

3GPP Name
Encryption Algorithm
3GPP Reference
TS 25.413
Description
This parameter indicates encryption algorithm 0 that the RNC

supports.
Instance
RNC
ZWF21-01-005
Ciphering
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the encryption algorithm
supported by the RNC.

Related factors: Encryption requirements of the operator.
UEA0: no encryption; UEA1: encryption with algorithm 1.
This parameter must be configured by negotiating with the CN.
The default value supports UEA0 and UEA1. It is the configuration
Reason
used universally. It can be set based on the carrier's encryption

requirements.
Change Take Effect
No
How to Impact
N/A
2-847
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
encryAlgUEA1
Managed Object

3GPP Name
3GPP Reference
TS 25.413
Description

supports.
Instance
RNC and PLMN
ZWF21-01-005
Ciphering
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
2-848
SJ-20141209142030-013|2015-11-12 (R1.3)

Related factors: Encryption requirements of the carrier.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
encryAlgUEA2
Managed Object

3GPP Name
3GPP Reference
TS 25.413
Description

supports.
Instance
RNC and PLMN
ZWF21-01-025/ZWF21-01-005
UEA2 and UIA2 FG/Ciphering
UEA2 and UIA2 FG/Connection Management FG
0: Not Support
1: Support
Unit
N/A
2-849
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No

Related factors: Encryption requirements of the operator.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.10 AMR_NB 4.75k Use Tag

Full Name
AMR_NB 4.75k Use Tag
Abbreviated Name
amrNbMode0UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-850
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the RNC supports AMR 4.75 kbps
in Iu UP version 1. It is used in the user plane initialization process
of RAB establishment or SRNS relocation.
Instance
RNC and PLMN
ZWF21-02-001
ZWF21-04-005
CS Conversational RAB for AMR Speech


0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: it indicates whether AMR 4.75 kbps is used.
Related factors: AMR rate in normal case.

Adjustment suggestion: The normal rate for narrowband AMR
services is 12.2 kbps, and other rates can be set to "Not Used". If
the Iu UP Mode version is 2, this parameter is invalid.
The AMR rate for narrowband AMR services in normal case is 12.2
Reason
kbps, and other rates can be set to "Not Used"..
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-851
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
amrNbMode1UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC and PLMN

ZWF21-02-001
ZWF21-04-005


0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
2-852
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrNbMode2UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC and PLMN
ZWF21-02-001
ZWF21-04-005

2-853
SJ-20141209142030-013|2015-11-12 (R1.3)

0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrNbMode3UseTag
2-854
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC and PLMN

ZWF21-02-001
ZWF21-04-005


0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
2-855
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrNbMode4UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC and PLMN

ZWF21-02-001
ZWF21-04-005


0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
2-856
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrNbMode5UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC and PLMN
ZWF21-02-001
ZWF21-04-005

2-857
SJ-20141209142030-013|2015-11-12 (R1.3)

0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrNbMode6UseTag
2-858
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC and PLMN

ZWF21-02-001
ZWF21-04-005


0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
2-859
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrNbMode7UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC and PLMN

ZWF21-02-001
ZWF21-04-005


0: Not Used
1: Used
Unit
N/A
Default Value
Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
2-860
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.18 AMR_WB 6.60k Use Tag

Full Name
AMR_WB 6.60k Use Tag
Abbreviated Name
amrWbMode0UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports AMR-WB 6.60

kbps in Iu UP version 1. It is used in the user plane initialization
process of RAB establishment or SRNS relocation.
Instance
RNC and PLMN
ZWF21-02-020
WB-AMR Speech Support
2-861
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Used
1: Used
Unit
N/A
Default Value
Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
This parameter indicates whether WB AMR 6.60 kbps is used or
not. WB AMR 12.65 kbps/8.85 kbps/6.6 kbps is most frequently

used. And other AMR modes can be set to "Not used".
WB AMR 12.65 kbps/8.85 kbps/6.6 kbps is most frequently used.
Reason
And other AMR rates can be set to "Not used".
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrWbMode1UseTag
Managed Object

3GPP Name
N/A
2-862
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
Default Value
Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-863
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
amrWbMode2UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
Default Value
Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
2-864
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrWbMode3UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
2-865
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrWbMode4UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
2-866
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrWbMode5UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-867
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-868
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
amrWbMode6UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
2-869
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrWbMode7UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
2-870
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
amrWbMode8UseTag
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC and PLMN
ZWF21-02-020
0: Not Used
1: Used
Unit
N/A
2-871
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.27 Tnnsf
Full Name
Tnnsf
Abbreviated Name
tNnsf
Managed Object

3GPP Name
TNNSF
3GPP Reference
TS 25.413
2-872
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the longest duration that the RNC may
store the Permanent NAS UE Identity IE (and the related Global
CN-ID IE) when the NNSF is active.
Instance
RNC and PLMN
ZWF21-30-021
Iu Flex
Iu Flex FG
1..255s, step 1s
Unit
Default Value
10s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter configures the influx NAS node
selection timer.
Related factors: the time tolerance of CS paging CN.
If the value is greater, the success rate of paging without a TMSI is
higher, the number of cached IMSIs in the RNC is larger, and the
occupied memory is larger.
It the value is smaller, the success rate of paging without a TMSI
is lower, the number of cached IMSIs in the RNC is smaller, and
the occupied memory is smaller.
The default value is configured according to 3GPP protocols.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-873
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.16.28 Lower Limit of GBR for Uplink Services Used for QoS
Negotiation/Renegotiation
Full Name
Lower Limit of GBR for Uplink Services Used for QoS

Abbreviated Name
ulLowLimNegGBR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the lower limit of guaranteed bit rate used
for QoS negotiation/renegotiation for uplink services.
Instance
RNC
ZWF21-05-020
[8, 16, 32, 64, 128, 144, 256, 384, 512, 711, 1024, 1399, 1448,
2048, 2886, 3072, 4096, 5760, 11520] kbps
Unit
kbps
Default Value
64 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the lower limit of guaranteed bit
rate used for QoS negotiation/renegotiation for uplink services.

Configuration Rule: Considering user experience and the successful
rate of access.
The higher the parameter, the better user experience and the lower
access successful rate when system load is high. And vice versa.
2-874
SJ-20141209142030-013|2015-11-12 (R1.3)
The value is a tradeoff between user experience and the access
Reason
success rate.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.29 Lower Limit of GBR for Downlink Services Used for QoS
Full Name
Lower Limit of GBR for Downlink Services Used for QoS

Abbreviated Name
dlLowLimNegGBR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the lower limit of guaranteed bit rate used
for QoS negotiation/renegotiation for Downlink services
Instance
RNC
ZWF21-05-020
[8, 16, 32, 64, 128, 144, 256, 384, 512, 711, 1024, 1399, 1448,
2048, 2886, 3072, 4096, 5760, 11520] kbps
Unit
kbps
Default Value
64 kbps
Related Parameters
N/A
2-875
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the lower limit of guaranteed bit
rate used for QoS negotiation/renegotiation for Downlink services.

This parameter is only valid when CN indicates unspecified
negotiation method of GBR to RNC.
Configuration Rule: Considering user experience and the successful
rate of access.
The higher the parameter, the better user experience and the lower
access successful rate when system load is high. And vice versa.
The value is a tradeoff between user experience and the access
Reason
success rate.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.30 Negotiated GBR Level Number Shared by Uplink and

Downlink
Full Name
Negotiated GBR Level Number Shared by Uplink and Downlink
Abbreviated Name
negGBRLevNum
Managed Object

3GPP Name
N/A
2-876
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the level number of the negotiated

guaranteed bit rate. When 'Discrete values' method is set by
CN, RNC determines the negotiated GBR levels according to
the the alternative GBR values given by CN and the value of the
parameter.This parameter is shared by uplink and downlink.
Instance
RNC
ZWF21-05-020
1..17
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the level number of the
negotiated guaranteed bit rate. This parameter is shared by uplink

and downlink.
Configuration Rule: Considering user experience when upgrading
UE's GBR and the smoothness of the raise of system load when
upgrading GBR.
The more level number, the smoother increment to the system load
when upgrading the GBR, but the worse the user experience.The
configuration of the parameter is a tradeoff between above two
factors.
Tradeoff of user experience when upgrading UE's GBR and the
Reason
smoothness of the raise of system load when upgrading GBR.
Change Take Effect
New Connection
No
How to Impact
N/A
2-877
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.16.31 CDT Function Switch

Full Name
CDT Function Switch
Abbreviated Name
cdtSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch for the CDT call record
acquisition function. If it is set to "1" (On), the RNC supports the
CDT call record acquisition function. If it is set to "0" (Off), the RNC
does not support the CDT call record acquisition function.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-878
SJ-20141209142030-013|2015-11-12 (R1.3)
switch for the CDT function.

allows the CDT call record acquisition service to be provided.
The default value is set to "0" (Off) to decrease the influence on the
Reason
RNC system performance. This parameter can be set to "1" (On)

as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.32 CDT-IMEI Acquisition Switch

Full Name
CDT-IMEI Acquisition Switch
Abbreviated Name
cdtImeiAcqSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of IMEI acquisition for the CDT
call record function. If it is set to "1" (On), the RNC supports the
IMEI acquisition function.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
2-879
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
switch of the IMEI acquisition for the CDT function.

Related factors: On/Off status of the IMEI acquisition function and
RNC system performance.
If the IMEI acquisition function is enabled, the RNC collects IMEI
numbers for UE action analysis. However, the RNC system
performance may be influenced.
The default value is set to "0" (Off) to decrease the influence on the
Reason

as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.33 Switch for RL Reference Time Adjust During Diversity Mode

Full Name
Switch for RL Reference Time Adjust During Diversity Mode
2-880
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
rlRefTimeAjtSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to adjust the radio link reference

time in macro diversity mode. It is used to prevent the radio link
sending/receiving time in macro diversity mode from locating outside
the receiving time window. When this parameter is set to Off, the UE
internal measurement (Event 6G/6F) used to trigger the radio link
reference time adjustment is not performed. When this parameter
is set to On, the UE internal measurement (Event 6G/6F) used
to trigger the radio link reference time adjustment is performed.
Note: The UE internal measurement and UE quality measurement
(DL BLER) share the same measurement ID (4). When both
measurements are performed, the UE internal measurement (Event
6G/6F) takes precedence.
Instance
RNC
ZWF21-03-001
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-881
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicator of whether to adjust the radio link
reference time in macro diversity mode

Related factors:
When the parameter is set to On, poor downlink quality of a UE or
even call drop due to UE mobility or clock skew between NodeBs
can be avoided.
When the parameter is set to Off, call drop due to UE mobility or
clock skew between NodeBs may occur.
The default parameter value is set based on the service
Reason
performance.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.34 Handover to GSM Penalty Timer

Full Name
Handover to GSM Penalty Timer
Abbreviated Name
hoToGsmPenTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates that this timer is initialized upon handover

failure from UMTS to GSM. The RNC will not handle inter-RAT
measurement reports until the timer expires.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
2-882
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
0..65535s step 1s
Unit
Default Value
20s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: timer of forbidding handover after inter-RAT
handover failure
Related factors: system resources
If the parameter is set to a large value, the next handover will be
triggered a long time after the inter-RAT handover fails, which may
increase the probability of call drop because the system quality
becomes poor. If the parameter is set to a small value, the next
handover will be triggered shortly after the inter-RAT handover
fails. Repeated handover failures will occur, which will occupy more
system resources.
The default parameter value is set based on the system resources
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.35 Compressed Mode Configuration Strategy

2-883
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Compressed Mode Configuration Strategy
Abbreviated Name
compMdCfgStra
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether inter-frequency and inter-RAT

compressed modes are configured to UE simultaneously or not
when inter-frequency and inter-RAT neighboring cells exist.
Instance
RNC
ZWF21-03-010
Compressed Mode
Handover Control FG
0: Configure Inter-Frequency and Inter-Rat compressed mode

simultaneously
1: Configure Inter-Frequency and Inter-Rat compressed mode
individually
Unit
N/A
Default Value
Configure Inter-Frequency and Inter-Rat compressed mode

simultaneously
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
If some venders don't support inter-frequency or inter-RAT
compressed mode that configured at the same time via IUR, the
value is 1, otherwise the value is 0.
Parameter function: compressed mode configuration policy via IUR
Effect: compatibility of different equipment vendors
If the parameter is set to 0, the RNC will configure two types of
accompanying compressed modes (inter-frequency and inter-RAT).
If both SRNC and DRNC belong to ZTE, this parameter should be
set to 0.
If the parameter is set to 1, the RNC will configure only one type of
accompanying compressed mode (inter-frequency or inter-RAT)
2-884
SJ-20141209142030-013|2015-11-12 (R1.3)
based on the specific value of IfOrRatHoSwch. When DRNC

belongs to another equipment vendor, this parameter should be
set to 0.
The default parameter value is set based on actual networking
Reason
requirements and compatibility of equipment vendors.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.36 RNC Switch for PS Handover with LTE

Full Name
RNC Switch for PS Handover with LTE
Abbreviated Name
rncPsHoLteSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates whether RNC supports PS handovers from

UTRAN to LTE.
Instance
RNC
ZWF21-03-110
Handover with LTE
0: Off
1: On
Unit
N/A
Default Value
0: Off
2-885
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for PS handover to LTE
Related factors: actual network planning

Adjustment suggestion: This parameter is set based on the actual
planning requirements.
The default parameter value is set based on the actual network
Reason
planning.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.37 RNC SRVCC Switch

Full Name
RNC SRVCC Switch
Abbreviated Name
rncSrvccSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates whether RNC supports the SRVCC function

of TE->Utran to provide continuity of voice services between LTE
and Utran.
2-886
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-03-120
SR-VCC
SR-VCC FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: RNC SRVCC switch

The parameter indicates whether RNC supports SRVCC. If the
parameter is "On", voice services in EUTRAN will be allowed to
be handed over to Utran. If the parameter is "Off", voice services
in EUTRAN will not be allowed to be handed over to Utran, which
may cause call drop.
Reason
planning.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-887
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.38 Narrow-Band AMR Initial Data Rate for High Cell Load or
Bad Coverage Area Users
Full Name
Narrow-Band AMR Initial Data Rate for High Cell Load or Bad
Coverage Area Users
Abbreviated Name
nAmrInitialRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to determine the initial AMR service rate for
accessing narrow-band AMR services when the cell load is high.
When the cell effective downlink load is larger than AmrDlLdThrd
or the effective uplink load is larger than AmrUlLdThrd, the new
narrow-band AMR will be accessed with the discounting data rate
of NAmrInitialRate.
When URncInfo.AmrBadCovSwh is set to "Supported" and the
best cell CPICH Ec/No is smaller than or equal to BadCovEcN0,
or the best cell CPICH RSCP is smaller than or equal to
UCelInfoFDD.BadCovRscp, the new NB-AMR will be accessed with
the discounting data rate of NAmrInitialRate.
Instance
RNC and PLMN
ZWF21-04-014
0: 4.75 kbps
1: 5.15 kbps
2: 5.90 kbps
3: 6.70 kbps
4: 7.40 kbps
5: 7.95 kbps
6: 10.2 kbps
7: 12.2 kbps
Unit
kbps
Default Value
5.90 kbps
Related Parameters
N/A
N/A
Parameters
2-888
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: is used to determine the initial rate for
accessing the narrowband AMR service when the cell load is high or
the user is in bad coverage area.
If this parameter is set to a greater value, the AMR access rate is
higher, and the quality of service is better.
If this parameter is set to a smaller value, the AMR access rate is
lower, and the system volume can be increased.
The default value takes service quality and system capacity into
Reason
consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.39 Wide-Band AMR Initial Data Rate for High Cell Load or Bad
Coverage Area Users
Full Name
Wide-Band AMR Initial Data Rate for High Cell Load or Bad
Coverage Area Users
Abbreviated Name
wAmrInitialRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-889
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is used to determine the initial AMR service rate for
accessing wide-band AMR services when the cell load is high.
When the cell effective downlink load is larger than AmrDlLdThrd
or the effective uplink load is larger than AmrUlLdThrd, the new
wide-band AMR will be accessed with the discounting data rate
of WAmrInitialRate.
When URncInfo.AmrBadCovSwh is set to "Supported" and the
best cell CPICH Ec/No is smaller than or equal to BadCovEcN0,
or the best cell CPICH RSCP is smaller than or equal to
UCelInfoFDD.BadCovRscp, the new NB-AMR and WB-AMR will
be accessed with the discounting data rate of WAmrInitialRate
seperately.
Instance
RNC and PLMN
ZWF21-04-014
0: 6.60 kbps
1: 8.85 kbps
2: 12.65 kbps
3: 14.25 kbps
4: 15.85 kbps
5: 18.25 kbps
6: 19.85 kbps
7: 23.05 kbps
8: 23.85 kbps
Unit
kbps
Default Value
6.60 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-890
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: is used to determine the initial rate for
accessing the broadband AMR service when the cell load is high or
the user is in bad coverage area.
If this parameter is set to a greater value, the AMR access rate is
higher, and the quality of service is better.
If this parameter is set to a smaller value, the AMR access rate is
lower, and the system volume can be increased.
The default value takes service quality and system capacity into
Reason
consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.40 Special Network Resource Identifier in CS Domain

Full Name
Special Network Resource Identifier in CS Domain
Abbreviated Name
csNullNri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the "null-NRI" value of the CS domain.

When the RNC receives a message with "null-NRI", the NAS node
selection function is used to select a CN node.
Instance
RNC and PLMN
ZWF21-30-021
Iu Flex
2-891
SJ-20141209142030-013|2015-11-12 (R1.3)
Iu Flex FG
0..1023, 0XFFFF is invalid value
Unit
N/A
Default Value
0xFFFF
Related Parameters
R_IuInfo->-CsNri
Except invalid value (0XFFFF), the parameter value can't equal with
Parameters
CsNri that configured in R_IuInfo.
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter configures the "null-NRI" value
of the CS domain.
CN, and is configured according to the configurations of the CS
domain.
Reason
negotiated with CN
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.41 Special Network Resource Identifier in PS Domain

Full Name
Special Network Resource Identifier in PS Domain
Abbreviated Name
psNullNri
Managed Object
2-892
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the "null-NRI" value of the PS domain.

When the RNC receives a message with "null-NRI", the NAS node
selection function is used to select a CN node.
Instance
RNC and PLMN
ZWF21-30-021
Iu Flex
Iu Flex FG
0..1023, 0XFFFF is invalid value
Unit
N/A
Default Value
0xFFFF
Related Parameters
R_IuInfo->-PsNri
Except invalid value (0XFFFF), the parameter value can't equal with
Parameters
PsNri that configured in R_IuInfo.
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter configures the "null-NRI" value
of the PS domain.
CN, and is configured according to the PS domain configurations.
Reason
negotiated with CN
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-893
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.16.42 THP Segment Threshold

Full Name
THP Segment Threshold
Abbreviated Name
thpThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Traffic Handling Priority (THP) segment

threshold. The THP will be mapped by the RNC to different THP
segments based on this parameter. It can simplify the Basic Priority
mapping where Basic Priority is mapped from THP segment instead
of THP.
Instance
RNC
ZWF21-05-002
RAB QoS Parameters Mapping
QOS Guarantee FG
1..15
Unit
N/A
Default Value
[5, 10]
Related Parameters
THPThresh [0], THPThresh [1]
THPThresh [0]< THPThresh [1]
Parameters
Data Type
long[DBS_RR_THP_SEGMENT-1]
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
2-894
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: Traffic Handling Priority (THP) segment
threshold. The THP will be mapped by RNC to different THP

segments based on this parameter that is used in the mapping of
the Basic Priority (BP). For THPs in the same THP segment, the
same BP value will be mapped
Related factors: Basic Priority of different THP users, requirements
of the operator.
Effect: This parameter indicates the THP segment threshold. It
should be set based on the operators requirements (THP value
and category).
Adjustment suggestion: This parameter is a QoS parameter, and
should be set based on requirements of the operator. If the operator
has no specific QoS requirements, the default value is used.
The different between THP thresholds should be as large as
Reason
possible so that it is easy to add new THP values.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.43 Uplink Rate Adjustment Level Number

Full Name
Uplink Rate Adjustment Level Number
Abbreviated Name
ulRateAdjLevNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of DRBC uplink rate adjustment

levels, meaning the number of available uplink DCH rate levels.
2-895
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC and PLMN
ZWF21-04-004
1..MAX_NUM_RATE_ADJUST, MAX_NUM_RATE_ADJUST=6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of uplink DRBC rate levels.
Related factors: data throughput requirement, resource usage, and

call completion ratio.
Adjustment suggestion: More rate levels can ensure that the
radio resources are more evenly distributed. However, if there
are too many rate levels, the radio resources may be frequently
redistributed. Generally, three rate levels can satisfy the throughput
requirement, avoid a waste of resources, and ensure that the radio
resources are rationally distributed.
The default value is set based on data throughput requirements,
Reason
resource utilization rate, and successful call rate.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-896
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.44 Uplink Rate Adjustment Level

Full Name
Uplink Rate Adjustment Level
Abbreviated Name
ulRateAdjLev
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the adjustment levels of the uplink DRBC

rate. The Uplink rate adjustment range is limited by this parameter.
MAX_NUM_RATE_ADJUST=6.
Instance
RNC and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
[16, 64, 384] kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_RATE_ADJUST]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the uplink DRBC rate level.

Adjustment suggestion: More rate levels can ensure that the
radio resources are more evenly distributed. However, if there
are too many rate levels, the radio resources may be frequently
redistributed. Generally, three rate levels can satisfy the throughput
requirement, avoid a waste of resources, and ensure that the radio
resources are rationally distributed.
Reason
2-897
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.45 Downlink Rate Adjustment Level Number

Full Name
Downlink Rate Adjustment Level Number
Abbreviated Name
dlRateAdjLevNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of DRBC downlink rate

adjustment levels, meaning the number of available downlink DCH
rate levels.
Instance
RNC and PLMN
ZWF21-04-004
1..MAX_NUM_RATE_ADJUST, MAX_NUM_RATE_ADJUST=6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-898
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of downlink DRBC rate levels.

Adjustment suggestion: The downlink channel codes are limited.
Therefore, more rate levels can ensure that the radio resources are
more evenly distributed. However, if there are too many rate levels,
the radio resources may be frequently redistributed. Generally, four
rate levels can satisfy the throughput requirement, avoid a waste
of resources, and ensure that the radio resources are rationally
distributed.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.46 Downlink Rate Adjustment Level

Full Name
Downlink Rate Adjustment Level
Abbreviated Name
dlRateAdjLev
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the adjustment levels of the downlink

DRBC rate. The downlink rate adjustment range is limited by this
parameter. MAX_NUM_RATE_ADJUST=6.
2-899
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
[8, 64, 128, 384] kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_RATE_ADJUST]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the downlink DRBC rate level.

Adjustment suggestion: The downlink channel codes are limited.
Therefore, more rate levels can ensure that the radio resources are
more evenly distributed. However, if there are too many rate levels,
the radio resources may be frequently redistributed. Generally, four
rate levels can satisfy the throughput requirement, avoid a waste
of resources, and ensure that the radio resources are rationally
distributed.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-900
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.47 Used Dynamic Radio Bearer Control Information Profile

Full Name
Used Dynamic Radio Bearer Control Information Profile
Abbreviated Name
refUDrbcProfile
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Drbc strategy used by Non-DPI scene.
Instance
RNC and PLMN
ZWF21-04-004
N/A
Unit
N/A
Default Value
DRBC Strategy for not DPI Scene
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the configuration index.
Configure an index number.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-901
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.16.48 Switch of CS voice over HSPA

Full Name
Switch of CS voice over HSPA
Abbreviated Name
amrOverHspaSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether CS voiceAMR can be carried on

HS-DSCH/E-DCH or HS-DSCH/DCH.
On: the CS voiceAMR can be carried on HS-DSCH/E-DCH or
HS-DSCH/DCH.
Off: CS voiceAMR cannot be carried on HS-DSCH/E-DCH or
HS-DSCH/DCH.
Instance
RNC
ZWF26-02-005
CS over HSPA
CS over HSPA FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-902
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets whether to enable the CS voice service
on the HSPA.
Configuration rule: If the switch is on, the system capacity is
extended, but the voice service quality is affected. It is used in
a high capacity scenario.
If the switch is off, the voice service quality becomes better. It is
used in a middle or small capacity scenario.
The function is controlled by whether the operator has purchased
the license.
The default value is set to off to improve the quality of voice services.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.49 DRBC Method Switch

Full Name
DRBC Method Switch
Abbreviated Name
drbcSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch which indicates whether the dynamic

radio bearer control algorithm is supported for the uplink and
downlink services.
Instance
RNC
2-903
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


0: Switch Off in UL & Switch Off in DL

1: Switch Off in UL & Switch On in DL
2: Switch On in UL & Switch Off in DL
3: Switch On in UL & Switch On in DL
Unit
N/A
Default Value
3: Switch On in UL & Switch On in DL
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the DRBC algorithm switch.
Configuration rule: If the switch is on, the dynamic adjustment

of radio resources is implemented, which improve the effective
resource usage.
If the switch is off, the dynamic adjustment of radio resource cannot
be implemented, and the effective resource usage is low.
The default value is set to distribute the resources as reasonable
Reason
as possible.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-904
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.16.50 Switch of E-TTI Switching Triggered by User Plane

Throughput Measurement
Full Name
Switch of E-TTI Switching Triggered by User Plane Throughput

Measurement
Abbreviated Name
ettiTraffVolSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of E-TTI switching triggered by

user plane throughput measurement. If this parameter is set to "On",
the function of E-TTI switching triggered by user plane throughput
measurement is valid. For the I/B service in the commercial network,
the 2 ms E-TTI UE can use 10 ms E-TTI initially and be switched
to 2 ms afterwards by throughput measurement. If it is set to "Off",
the function of E-TTI switching triggered by user plane throughput
measurement is invalid and RNC determines to use 2 ms or 10 ms
in accordance with the UE capability. E-TTI configuration of the
service in the OMC-R when the service is built initially.
Instance
RNC
ZWF25-01-033
ZWF26-03-004
Adaptive HSUPA TTI

DC-HSUPA

DC-HSUPA FG
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
2-905
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the switch for E-TTI switching based on
the user-plane throughput.

Configuration rule:
If the switch is on, the E-TTI can be dynamically adjusted based
on the user-plane throughput, and the system throughput can be
increased.
If the switch is off, the E-TTI cannot be dynamically adjusted but the
number of E-TTI reconfigurations can be reduced.
The default value is set to off to reduce the E-TTI reconfigurations.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.51 Switch for DL DCH Rate Adjustment Based on D-TCP

Full Name
Switch for DL DCH Rate Adjustment Based on D-TCP
Abbreviated Name
dlPwrDasf
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-906
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether DL DCH rate adjustment for

PS services based on D-TCP measurement is supported. If this
switch is "Off", it is invalid for DCH rate adjustment based on D-TCP
measurement; otherwise, valid.
Instance
RNC
ZWF21-04-004
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
dchAdjRateSwch
When dchAdjRateSwch is set to 0, this parameter is invalid.
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the downlink DCH rate adjustment switch
based on the D-TCP.

Configuration rule: If the switch is on, when the D-TCP is too high,
the system can reduce the downlink rate of services based on the
D-TCP, which decreases the call drop rate, but affects the user
experience.
If the switch is off, the downlink rate of services cannot be reduced
based the D-TCP, which does not affect the user experience, but
may increase the call drop ratio when the user channel quality is
very poor.
The default value is set to on to reduce the risk of call drop.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-907
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.16.52 Switch for UL DCH Rate Adjustment Based on UE

Transmission Power
Full Name
Switch for UL DCH Rate Adjustment Based on UE Transmission

Power
Abbreviated Name
ulPwrDasf
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether UL DCH rate adjustment for PS

services based on UE transmission power is supported. If this
switch is "Off", it is invalid for DCH rate adjustment based on UE
transmission power.Otherwise, it is valid.
Instance
RNC
ZWF21-04-004
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
dchAdjRateSwch
When dchAdjRateSwch is set to 0, this parameter is invalid.
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-908
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets whether to enable the uplink DCH rate
adjustment switch based on D-TCP.

Configuration rule: If the switch is on, the system can reduce the
uplink rate of services based the D-TCP when the D-TCP is high,
which decreases the call drop ratio, but affects the user experience.
If the switch is off, the system cannot reduce the downlink rate of
services based D-TCP, it doesn't influence the user experience,
but it may increase the risk of call drop when the user's channel
quality is very bad.
The default value is set to on to reduce the risk of call drop.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.53 Downlink Maximum Rate Threshold of I/B Service on

CELL_FACH
Full Name
Downlink Maximum Rate Threshold of I/B Service on CELL_FACH
Abbreviated Name
rfach
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-909
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the downlink maximum rate

threshold for I/B service established on CELL_FACH. When
interactive/background service is set up initially, if the downlink
maximum bit rate is lower than the threshold, allocate FACH for the
service. Otherwise, allocate HS-DSCH/EDCH, HS-DSCH/DCH or
DCH/DCH in accordance with UE capability.
Instance
RNC
ZWF21-04-004
Unit
kbps
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum downlink rate for the I/B
class service established in Cell_FACH status.

Related factors: user experience and resource usage.
Configuration Rule:
If this parameter is set to a smaller value, the traffic is more difficult
to be established in Cell_FACH status, and the user experience is
better, but it may cause resource waste.
If this parameter is set to a larger value, the traffic is easier to
be established in Cell_FACH status, and you can make best of
common resources, but the user experience is affected.
The default value is set based on the resource utilization ratio and
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
2-910
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.16.54 Uplink Maximum Rate Threshold of I/B Service on RACH

Full Name
Uplink Maximum Rate Threshold of I/B Service on RACH
Abbreviated Name
rrach
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink maximum rate threshold for I/B
service established on CELL_FACH. When interactive/background
service is set up initially, if the uplink maximum bit rate is lower than
the threshold, allocate FACH for the service. Otherwise, allocate
HS-DSCH/EDCH, HS-DSCH/DCH or DCH/DCH in accordance with
UE capability.
Instance
RNC
ZWF21-04-004
Unit
kbps
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-911
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the maximum uplink rate for the I/B class
service established in Cell_FACH status.

Configuration rule: If this parameter is set to a smaller value, the
traffic is more difficult to be established in Cell_FACH status, and
the user experience is better, but it may cause resource waste.
If this parameter is set to a larger value, the traffic is easier to
be established in Cell_FACH status, and you can make best of
common resources, but the user experience is affected.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.55 Switch for DCH Rate Adjustment Based on Traffic Volume

Measurement
Full Name
Switch for DCH Rate Adjustment Based on Traffic Volume

Measurement
Abbreviated Name
dchAdjRateSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether DCH rate adjustment based on

traffic volume measurement is supported.
If this switch is "Off", it is invalid for DCH rate adjustment based on
traffic volume measurement. Otherwise, it is valid.
2-912
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-04-004
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the DCH rate adjustment switch based
on the traffic volume triggering.

Configuration rule: If the switch is on, the service rate can be
modified based on the traffic requirements, and the effective system
resource usage can be increased.
If the switch is off, the service rate can not be modified based on the
traffic requirements, and the effective system resource usage is low.
The default value is set to on to improve the effective resource
Reason
utilization of the system.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-913
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.56 HS/D->D/D or HS/E->D/D Based on Quality Measurement

Switch for I/B Traffic
Full Name
HS/D->D/D or HS/E->D/D Based on Quality Measurement Switch

for I/B Traffic
Abbreviated Name
iBChQSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether transferring from HS-DSCH to

DCH for interactive/ background service based on event 1F is
allowed. If this switch is "On" and the uplink transport channel is
E-DCH, interactive/ background service will transfer from HSPA
including HS-DSCH /E-DCH and HS-DSCH/DCH to DCH /DCH
based on event 1F.
Instance
RNC
ZWF23-01-A
ZWF25-01-A

0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-914
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets whether to switch traffic from the
HS/D->D/Dor from HS/E->D/D based on channel quality

measurement for I/B services.
Because the HSPA uses the high-order modulation, its
anti-interference capability is poorer than that of the DCH.
Configuration rule: If the switch is on, the traffic is switched over
from the HSPA to the DCH when the channel quality is poor. The
transition can improve the voice service quality, but decrease the
system capacity and may even increases the call drop ratio.
If the switch is off, the above transition is not allowed when the
channel quality is poor.
The default value is set to off to off to reduce the risk of call drop.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.57 HS/D->D/D or HS/E->D/D Based on Quality Measurement

Switch for S Traffic
Full Name
HS/D->D/D or HS/E->D/D Based on Quality Measurement Switch

for S Traffic
Abbreviated Name
sChQSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-915
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether transferring from HS-DSCH to

DCH for streaming service based on event 1F is allowed. If this
switch is "On", and the uplink transport channel is E-DCH, streaming
service will transfer from HSPA include HS-DSCH /E-DCH and
HS-DSCH/DCH to DCH /DCH based on event 1F.
Instance
RNC
ZWF23-01-A
ZWF25-01-A

0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets whether to switch traffic from HS/D->D/D
or from HS/E->D/D channel based on channel quality measurement.

Configuration rule: If the switch is on, the service quality is improved,
but the system capacity is decreased.
If the switch is off, the system capacity is increased, but the service
quality is affected.
The default value is set to off to improve the system capacity.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-916
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.16.58 C Traffic Rate Threshold Used for Determining NRT PS

Rate Upper Limit
Full Name
C Traffic Rate Threshold Used for Determining NRT PS Rate Upper

Limit
Abbreviated Name
cRateThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If the conversational class services (PS or CS) and the

Streaming/Interactive/Background class PS services erupt
simultaneously, and use DCH/DCH+DCH/DCH channel. This
parameter is used to determine the rate threshold of the
conversational class service of the rate upper-limit of the I/B PS
services.
If the rate of the conversational class service is smaller
than the threshold, rate upper-limit of the I/B PS service
uses DlPsRateLmtLowC/UlPsRateLmtLowC. If the rate
of the conversational class service is larger than the
threshold, the rate upper-limit of the I/B PS service uses
DlPsRateLmtHighC/UlPsRateLmtHighC.
Instance
RNC
ZWF21-04-004
Unit
kbps
Default Value
32
Related Parameters
N/A
2-917
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the conversational traffic rate threshold
used for determining upper limit of the NRT PS for the conversational
class and PS multi-call service.
Related factors: quality of conversational class service and I/B
class PS services.
Configuration rule: If this parameter is set too large, the rate of PS
services can increase to a higher rate, which affects the I/B class
PS service quality.
If this parameter is set too small, the rate of PS services is limited to
a low rate, which affects the user experience.
The default value of the parameter is 32K. Because 32K is an
Reason
intermediate value between AMR 12.2K and CS64K.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.59 NRT PS Traffic Uplink Rate Upper Limit When Low Rate C
Traffic+ PS Traffic
Full Name
NRT PS Traffic Uplink Rate Upper Limit When Low Rate C Traffic+
PS Traffic
Abbreviated Name
ulPsRateLmtLowC
Managed Object

2-918
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the I/B PS uplink rate upper

limit when Multi-RABs are conversational (CS or PS) +
streaming/interactive/background PS and the rate of the
conversational service is low, in which case, the sum of the uplink
rates of all the I/B PS services cannot exceed this threshold.
Whether the rate of the conversational service is considered as low
or high is determined in accordance with "C Traffic Rate Threshold
Used for Determining NRT PS Rate Upper Limit".
Instance
RNC
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
128
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the upper limit of the NRT PS traffic uplink
rate for low-rate conversational class service and PS multi-call

service.
class PS services.
Configuration rule: If this parameter is set to a larger value, the PS
service rate can be faster, which affects the quality of the low-rate
conversational class service.
If this parameter is set to a small value, the PS service rate is
restricted, which affects the user experience.
Adjustment suggestion: It is recommended that DlPSRateLmtHighC
is smaller than DlPSRateLmtLowC.
2-919
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on the qualities of conversational
Reason
class services and I/B-class services.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.60 NRT PS Traffic Downlink Rate Upper Limit When Low Rate
C Traffic+ PS Traffic
Full Name
NRT PS Traffic Downlink Rate Upper Limit When Low Rate C

Traffic+ PS Traffic
Abbreviated Name
dlPsRateLmtLowC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the I/B PS downlink rate upper

conversational service is low, in which case, the sum of the downlink
Instance
RNC
ZWF21-04-004
2-920
SJ-20141209142030-013|2015-11-12 (R1.3)
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
128
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the upper limit of the NRT PS traffic
downlink rate for low-rate conversational class service and PS

multi-call service.
class PS services.
service rate can be faster, which affects the quality of the low-rate
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-921
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.61 NRT PS Traffic Uplink Rate Upper Limit When High Rate C
Traffic+ PS Traffic
Full Name
NRT PS Traffic Uplink Rate Upper Limit When High Rate C Traffic+
PS Traffic
Abbreviated Name
ulPsRateLmtHighC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the I/B PS uplink rate upper

conversational service is high, in which case, the sum of the uplink
Instance
RNC
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
64
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-922
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the upper limit of the NRT PS traffic uplink
rate for high-rate conversational class service and PS multi-call

service.
class PS services.
service rate can be faster, which affects the quality of the high-rate
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.62 NRT PS Traffic Downlink Rate Upper Limit When High Rate
C Traffic+ PS Traffic
Full Name
NRT PS Traffic Downlink Rate Upper Limit When High Rate C

Traffic+ PS Traffic
Abbreviated Name
dlPsRateLmtHighC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-923
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the I/B PS downlink rate upper

conversational service is high, in which case, the sum of the
downlink rates of all the I/B PS services cannot exceed this
threshold. Whether the rate of the conversational service is
considered as low or high is determined in accordance with "C Traffic
Rate Threshold Used for Determining NRT PS Rate Upper Limit".
Instance
RNC
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
64
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the upper limit of the NRT PS traffic
downlink rate for the high-rate conversational class service and PS

multi-call service.
class PS services.
service rate can be faster, which affects the quality of the high-rate
Reason
class and I/B class services.
Change Take Effect
Ongoing Connection
No
2-924
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.63 Switch of supporting SRB on E-DCH

Full Name
Switch of supporting SRB on E-DCH
Abbreviated Name
srbOnEdchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether SRB beared on transport channel

E-DCH is allowed or not. When the minimum SF is E-DCH is
2sf2+2sf4, this parameter is useless. For SrbOnEdchSwch is "On",
and both cell and UE support F-DPCH, the signaling is mapped to
E-DCH/HS-DSCH. Otherwise, it is mapped to DCH/E-DCH, the
signaling is mapped to HS-DSCH/E-DCH or beared on DCH/E-DCH,
otherwise on DCH/DCH.
Instance
RNC
ZWF25-02-011
ZWF26-03-004
SRB over HSUPA

DC-HSUPA
SRB over HSUPA FG

DC-HSUPA FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
2-925
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets whether to allow signaling services to be
established on the E-DCH channel.

Configuration rule: If the switch is on, signaling services can be
established on the E-DCH, which saves DCH channel resource.
If the switch is off, the signaling services can be established on the
E-DCH channel only when the minimum SF is 2SF2+2SF4.
The function is controlled by whether the operator has purchased
the license.
This parameter is set depending on whether the operator has
Reason
bought the license.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.64 Quality Measurement Switch for VoIP/ CS Voice

Full Name
Quality Measurement Switch for VoIP/ CS Voice
Abbreviated Name
cChQSwch
Managed Object

3GPP Name
N/A
2-926
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates whether conversational class services

(VoIP/CS voice) allow the channel transitions in accordance with the
1F event of the channel quality.
If the switch is turned on, the HS-DSCH/E-DCH or HS-DSCH/DCH
channel carried on the conversational class services (VoIP/CS
voice) will be transferred to the DCH/DCH channel based on the 1F
event of the channel quality. Otherwise, it is not allowed.
Instance
RNC
ZWF21-02-A
ZWF26-02-005
VoIP Package
CS over HSPA
IMS Service FG
CS over HSPA FG
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets whether to enable the quality measurement
switch for the VoIP/CS voice service.

Because HSPA uses the high-order modulation, its anti-interference
capability is poorer than that of the DCH.
Configuration rule: If the switch is on, the traffic is transited from
HSPA to DCH when the channel quality is poor. The transition can
improve the voice service quality, but decrease the system capacity
and may even increase the call drop ratio.
If the switch is off, the above transition is not allowed when the
channel quality is poor.
The default value is set to on to improve the quality of voice services.
Reason
Change Take Effect
Ongoing Connection
2-927
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.65 Initial Rate of UL DCH

Full Name
Initial Rate of UL DCH
Abbreviated Name
initialRateUl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the UL initial access rate when DCH

creating services.
Instance
RNC
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
DrbcScene
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-928
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: sets the initial rate of UL DCH.
Related factors: user experience and the resource usage.

initial rate of UL DCH is slower, which affects the user experience.
If this parameter is set to a larger value, the initial rate of UL DCH is
faster, which improves the user experience, but may cause resource
waste and system load increment.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.66 Initial Rate of DL DCH

Full Name
Initial Rate of DL DCH
Abbreviated Name
initialRateDl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DL initial access rate when DCH

creating services.
Instance
RNC
ZWF21-04-004

2-929
SJ-20141209142030-013|2015-11-12 (R1.3)
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
DrbcScene
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the initial rate of DL DCH.

initial rate of DL DCH is slower, which affects the user experience.
If this parameter is set to a larger value, the initial rate of DL DCH is
faster, which improves the user experience, but may cause resource
waste and system load increment.
Reason
utilization ratio of radio resource and the user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.67 Switch of 6.8kbps Signalling Using on DCH

Full Name
Switch of 6.8kbps Signalling Using on DCH
Abbreviated Name
dchSig68Swch
Managed Object

2-930
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to replace 3.4 kbps signaling with

6.8 kbps signaling during RRC connection setup when signaling is
carried on DCH or when RB has been created when signaling is
carried on DPCH alone.
Instance
RNC
ZWF21-04-004
High Speed Signaling FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the switch of using 6.8 kbps signaling on
DCH.
Configuration rule:
If the switch is on, when signaling is created on DCH, or when the
RB is created and the signaling is only carried on DPCH, the 6.8
kbps signaling can be replaced by 3.4 kbps signaling. In this case,
the signaling flow becomes faster but uses more power resources.
If the switch is off, when the signaling is created on DCH, or when
the RB is created and the signaling is only carried on DPCH, the 6.8
kbps signaling cannot be used.
The default value takes resource utilization rate into consideration.
Reason
Change Take Effect
Ongoing Connection
No
2-931
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.68
Switch of PS Service Channel Allocation for Concurrent CS+P
S
Full Name
Switch of PS Service Channel Allocation for Concurrent CS+PS
Abbreviated Name
csPlusPsSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to control PS service channel allocation

for concurrent CS+PS. If the parameter is on, for CS service first
and then PS service triggered scenario, allocate DCH/DCH for
the PS service; For PS service first and then CS service triggered
scene, and if PS is on HS, perform the HS to DCH reconfiguration.
Otherwise, HS-DSCH/EDCH, HS-DSCH/DCH or DCH/DCH for PS
service is allocated in accordance with UE capability.
Instance
RNC and PLMN
ZWF21-05-026
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
2-932
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the switch for allocating the PS service
channel when there are concurrent CS and PS services.

This parameter is introduced to solve the problem that the CS call
drop rate when there are concurrent CS and PS services is higher
than that when there are only CS services.
If the CS call drop rate is high when there are concurrent CS and
PS services, the switch can be turned on, but this may affect the
experience of PS service users.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.69 Online-already Service Reconfiguration Method for UE of

Release 6 and after Release 6 When Multi-RAB
Full Name
Online-already Service Reconfiguration Method for UE of Release 6

and after Release 6 When Multi-RAB
Abbreviated Name
r6MulRabRcfgMeth
Managed Object

2-933
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to control online-already service

reconfiguration method for UE of R6 and after R6 when multi-RAB.
For the scene that it needs to reconfigure the already online service
at the same time during the setup of new service, if the parameter is
set to "0" , it means it takes RB Setup method, and then both the
online-already service reconfiguration and new service built by the
RADIO BEARER SETUP message in one step. If the parameter
is set to "1", it means it takes RB reconfiguration method, it first
performs the online-already service reconfiguration by RADIO
BEARER RECONFIGURATION message, and then performs new
service built by the RADIO BEARER SETUP message.
Instance
RNC and PLMN
ZWF21-05-026
0: RB Setup Method
1: RB Reconfiguration Method
Unit
N/A
Default Value
0: RB Setup Method
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the method for reconfiguring the online
services when there are concurrent services on the UE in R6 or

later versions.
If the UE is compatible, RB Setup is recommended, to reduce the
message on the air interface when the HS-DSCH is switched to
the DCH.
The default value is set based on UE compatibility.
Reason
Change Take Effect
Ongoing Connection
No
2-934
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.70 Switch of Dynamic Radio Bearer Control Based on DPI

Full Name
Switch of Dynamic Radio Bearer Control Based on DPI
Abbreviated Name
dpiDrbcSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch which indicates whether the dynamic

radio bearer control algorithm based on DPI is supported .
Instance
RNC
ZWF27-03-002
Application Aware DRBC
Application Aware Dynamic Radio Bearer Control FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-935
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates whether to apply different DRBC
strategies to the service types identified through DPI.

If the switch is on, different DRBC strategies can be applied to the
service types identified through DPI, ensuring a better resource
usage and user experience.
If the switch is off, different DRBC strategies cannot be applied to
the service types identified through DPI.
This switch should be configured based on whether the operator
has purchased the corresponding license.
This parameter can be adjusted depending on whether the operator
Reason
has purchased the required license.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.71 Switch of DPI Based QoS Algorithm

Full Name
Switch of DPI Based QoS Algorithm
Abbreviated Name
dpiQoSSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of DPI based QoS algorithm.
Instance
RNC and PLMN
ZWF27-01-100
Application Aware QoS
Application Aware QoS FG
2-936
SJ-20141209142030-013|2015-11-12 (R1.3)
0: OFF
1: ON
Unit
N/A
Default Value
0: OFF
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether the RNC supports DPI
based QoS algorithm or not.

The related factor: The requirement for differentiation of application
services.
The more detailed application service information is achieved by
RNC with DPI function. By this way, the different QoS strategies may
be executed to different application services in terms of application
service characteristics to get the better network performance.
Besides, the multi-stream schedule algorithm is implemented. With
it, the different data streams within one RAB will be scheduled
according to the application service type priority.
This parameter is a value-added function based on QoS algorithm
Reason
of DPI, which can be adjusted in accordance with the requirement

of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-937
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.72
Indicator for Whether to Release Qchat UE's Non-Qchat-RB2
PS service When There is no Traffic Volume
Full Name
Indicator for Whether to Release Qchat UE's Non-Qchat-RB2 PS

service When There is no Traffic Volume
Abbreviated Name
nonQchatPsRelInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the non-Qchat-RB2 PS service

will be released when it has no traffic volume.
Instance
RNC and PLMN
ZWF21-02-030
PTT Service Support
QCHAT FG
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates whether to release the PS I/B service
of non-QChat RB2 when there is no traffic volume.

It is recommended to release the PS I/B service of non-QChat
RB2 when there is no traffic volume, to increase the number of
concurrent PS services and to reduce the delay on the air interface.
The default value is set based on the number of common PS
Reason
services.
2-938
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.73 Event 4B0 Counter Threshold for the Release of Qchat UE's
Non-Qchat-RB2 PS Service, Shared by Uplink and Downlink
Full Name
Event 4B0 Counter Threshold for the Release of Qchat UE's

Non-Qchat-RB2 PS Service, Shared by Uplink and Downlink
Abbreviated Name
nQchatRel4B0Times
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the event 4B0 counter threshold that

needed will be released, when non-Qchat-RB2 PS service has no
traffic volume.
Instance
RNC and PLMN
ZWF21-02-030
PTT Service Support
QCHAT FG
1..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-939
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the threshold for triggering the 4B event
when the load of the RLC buffer is 0. This threshold is used to

determine whether to release the PS I/B service of non-QChat RB2.
Both uplink and downlink use this threshold.
If this parameter is set to a smaller value, the PS I/B service of
non-QChat RB2 is released at a faster speed when there is no
traffic volume.
If this parameter is set to a greater value, the PS I/B service of
non-QChat RB2 is released at a slower speed when there is no
traffic volume.
This parameter is mainly applicable to QChat RB1 release.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.74 NACC Support Indicator

Full Name
NACC Support Indicator
Abbreviated Name
naccSuppInd
Managed Object

3GPP Name
N/A
2-940
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter indicates whether provide the NACC(Network

Assisted Cell Change)function.0 indicates not support, 1 indicates
support.
Instance
RNC and PLMN
ZWF21-03-025
NACC
NACC FG
0: Not Supported
1: Support
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
It is related with the NACC function.if license supported NACC
function and RNC support NACC this parameter is configured 1,

else 0.
In case that license support, NACC helps UE reselect to 2G system.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-941
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.75 PS Inter-System Handover Indicator

Full Name
PS Inter-System Handover Indicator
Abbreviated Name
psInterSysHoSuppInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.413
Description
This parameter indicates whether PS inter-RAT handover is

supported. 0 Not supported; 1 Supported.
Instance
RNC
ZWF21-03-023
PS handover with GSM
PS handover with GSM FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: PS inter-system handover indicator
Related factors: service continuity, user experience

If the parameter is set to Supported, PS inter-RAT handover is
supported, which reduces service interruption time, improves the
continuity of PS services with high QoS requirements, and enhances
user experience.
If the parameter is set to Not Supported, PS services are interrupted
for a period of time because the UE needs to hand over to GERAN
by using the cell reselection procedure.
Reason
2-942
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.76 Inter-System DTM Support Indicator

Full Name
Inter-System DTM Support Indicator
Abbreviated Name
dtmSuppInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.413
Description
This parameter indicates whether DTM (Dual Transfer Mode) is

supported during an inter-RAT handover, which means that whether
an inter-RAT handover for both CS services and PS services at the
same time is supported. 0 - Not supported; 1 - Supported.
Instance
RNC
ZWF21-03-024
DTM Handover
DTM Handover with GSM FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
2-943
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicator of whether DTM is supported during
inter-RAT handover for both CS and PS services

Related factors: UE capability of supporting GSM, user experience,
and service continuity
If the parameter is set to Supported, when a UE moves, it can
perform inter-RAT handover simultaneously for both CS and PS
services by using the DTM mechanism, which ensures service
continuity and improve user experience.
If the parameter is set to Not Supported, PS services are interrupted
for a period of time because the UE needs to hand over to GERAN
by using the cell reselection procedure.
The default parameter value is set based on UE capability of
Reason
supporting GSM.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.77 WB-AMR Speech Support Indicator

Full Name
WB-AMR Speech Support Indicator
Abbreviated Name
wAmrSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331
2-944
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates if RNC supports WB-AMR Speech
Instance
RNC
ZWF21-02-020
0: Not upported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates if RNC supports WB-AMR
Speech
Configuration: If RNC supports WAMR, the value should be set
to "Support"
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-945
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.78 PS Conversational RAB for VoIP Support Indicator

Full Name
PS Conversational RAB for VoIP Support Indicator
Abbreviated Name
psConvTraSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates if RNC supports PS Conversational RAB

for VoIP
Instance
RNC
ZWF21-02-A
VoIP Package
IMS Service FG
0: Not upported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates if RNC supports PS
Conversational RAB for VoIP

Configuration: If RNC supports PS Conversational RAB for VoIP
and this function is paid, the value should be set to "Support"
PS domain VOIP service will be supported if the parameter is set
to "Supported".
N/A
Reason
Change Take Effect
No
0
2-946
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.79 PS Signalling RAB for IMS Support Indicator

Full Name
PS Signalling RAB for IMS Support Indicator
Abbreviated Name
psSigForImsInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.413
Description
This parameter indicates if RNC supports PS Signalling RAB for IMS
Instance
RNC
ZWF21-02-A
VoIP Package
IMS Service FG
0: Not upported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-947
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates if RNC supports PS Signalling
RAB for IMS

Configuration: If RNC supports PS Signalling RAB for IMS and this
function is paid, the value should be set to "Support"
Ps domain IMS signalling service will be supported if the parameter
is set to "Supported".
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.80 Service-Based Handover Support Indicator

Full Name
Service-Based Handover Support Indicator
Abbreviated Name
srvBasedHoInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an RNC supports a service-based

handover.
Instance
RNC
ZWF21-05-022
Service-Based Handover
Service-Based Handover FG
0: Not upported
1: Supported
2-948
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: service-based handover support indicator
Related factors:
If the parameter is set to Supported, the RNC can distribute services
on the UMTS and GSM systems based on service-based handover
policies. For example, AMR services on the GSM system and data
services on the UMTS system.
If the parameter is set to Not Supported, the RNC does not perform
service-based handover policies.
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.81 HSDPA HS-DPCCH ACK/NACK enhancement Support

Indicator
Full Name
HSDPA HS-DPCCH ACK/NACK enhancement Support Indicator
Abbreviated Name
ackNackEncInd
2-949
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter indicates whether HSDPA HS-DPCCH ACK/NACK

enhancement is supported by RNC. For R6 version and beyond,
HARQ preamble is added when ACK/NACK is sent in uplink, mode
1 means ACK/NACK enhancement is used, so as to increase the
reception accuracy of ACK/NACK. Only when this parameter is set
as 'Supported', can mode 1 be configured.
Instance
RNC
ZWF23-01-042
HSDPA HS-DPCCH ACK/NACK enhancement
HSDPA HS-DPCCH ACK/NACK enhancement FG
0: Not upported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether HSDPA HS-DPCCH
ACK/NACK enhancement is supported by RNC. For R6 version

and beyond, HARQ preamble is added when ACK/NACK is sent in
uplink, mode 1 means ACK/NACK enhancement is used, so as
to increase the reception accuracy of ACK/NACK. Only when this
parameter is set as 'Supported', can mode 1 be configured.
Configuration Rule: This parameter is configured according to
whether the operator has purchased the HSDPA HS-DPCCH
ACK/NACK enhancement license.
HSDPA HS-DPCCH ACK/NACK enhancement license is closed by
Reason
default, and will be opened when the operator has purchased the
license.
2-950
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.82 Neighbouring Cell Monitoring Support Indicator

Full Name
Neighbouring Cell Monitoring Support Indicator
Abbreviated Name
nbrCellMonSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an RNC should monitor

neighboring cells. When the parameter is set to 1, the RNC starts
to monitor the neighboring cells.
Instance
RNC
ZWF21-03-001
ZWF21-20-012
Neighboring Cell Monitoring
Handover Control FG
Neighboring Cell Monitoring FG
0: Not upported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
2-951
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: neighboring cell monitoring support indicator
Related factors:
If the parameter is set to Supported, the RNC monitors whether
neighboring cells are correctly configured to guarantee UE's service
continuity, avoid unnecessary interference, and reduce call drop
rate.
If the parameter is set to Not Supported, the RNC does not monitor
neighboring cells.
The default parameter value is set based on the actual network plan.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.83 Four E-DPDCHs Allowed Indicator

Full Name
Four E-DPDCHs Allowed Indicator
Abbreviated Name
fourEChAllowedInd
Managed Object

3GPP Name
N/A
2-952
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.413
Description
This parameter is used to control whether the UE can use

2SF2+2SF4 (at this time, the signaling must be carried on EDCH). 1:
The 2SF2+2SF4 can be used. 0: The 2SF2+2SF4 cannot be used.
Instance
RNC and PLMN

ZWF25-01-024
ZWF25-02-011
HSUPA 2ms TTI & 5.76Mbps Peak Bit Rate

SRB over HSUPA
HSUPA 2ms TTI & 5.76Mbps Peak Bit Rate FG

SRB over HSUPA FG
0: Not Allowed
1: Allowed
Unit
N/A
Default Value
1: Allowed
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets whether the UE can use 2SF2+2SF4.
Related factor: whether the operator purchases the license of

2SF2+2SF4.
If this parameter is set to 1, the UE is allowed to use 2SF2+2SF4,
and the peak rate 5.76 Mbps can be achieved.
If this parameter is set to 0, the UE is not allowed to use 2SF2+2SF4,
and the peak rate 5.76 Mbps cannot be achieved.
Configured in accordance with whether the operator has bought
Reason
the license of 2SF2+2SF4.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
2-953
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.16.84 Cell ID Positioning Support Indicator

Full Name
Cell ID Positioning Support Indicator
Abbreviated Name
cidLcsMethodInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After a positioning algorithm is selected, this parameter is used to

determine whether the positioning algorithm is supported.
Instance
RNC and PLMN
ZWF21-10-001
LCS with Cell ID & RTT
Location Service FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-954
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter is related to the positioning function and should
be configured based on the accuracy of positioning. CELL ID is

a low-accuracy positioning mode, while AGPS is a high-accuracy
positioning mode.
This parameter is a license parameter and should be set based
Reason
on the operators requirements.
Change Take Effect
Ongoing Connection(at next positioning transaction)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.85 AGPS Support Indicator

Full Name
AGPS Support Indicator
Abbreviated Name
agpsLcsMethodInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
After a positioning algorithm is selected, this parameter is used to

determine whether the positioning algorithm is supported.
Instance
RNC and PLMN
ZWF21-10-002
LCS with A-GPS
Location Service FG
0: Not Supported
1: Supported
Unit
N/A
2-955
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
This parameter is related to the positioning function and should
be configured based on the accuracy of positioning. CELL ID is

a low-accuracy positioning mode, while AGPS is a high-accuracy
positioning mode.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.86 Handover Based on IMSI Support Indicator

Full Name
Handover Based on IMSI Support Indicator
Abbreviated Name
basedImsiHoInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-956
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the IMSI-based handover is

supported.
Instance
RNC
ZWF21-03-022
IMSI based Handover
IMSI based Handover FG
0: Not upported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicator of whether the IMSI-based handover is
supported. It is used to determine whether a UE is allowed to access

or be handed over to an unauthorized cell based on the UEs IMSI.
Related factors:
When the parameter is set to Supported, some UEs are not allowed
to access or hand over to unauthorized cells based on IMSIs of
UEs, which may lead to the increase of the call rejection rate and
the handover failure rate.
When the parameter is set to Not Supported, UEs can access or
hand over to any cell.
This feature is not used.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-957
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.16.87 MBMS PTP over HSDPA Support Indicator

Full Name
MBMS PTP over HSDPA Support Indicator
Abbreviated Name
ptpOverHSInd
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331
Description
This parameter indicates whether MBMS PTP services can

be carried on the HS-DSCH channel in multicast or enhanced
broadcast services.
If this switch is set to "On" and PTP is selected, the RNC allocates
HS-DSCH for the UEs that support HS-DSCH.
If this switch is set to "Off" and PTP is selected, the RNC only
allocates DCH to carry MBMS PTP services.
Instance
RNC and PLMN
ZWF24-02-004
MBMS PTP over HSDPA
MBMS FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-958
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: It indicates whether the MBMS PTP service can
be carried on HSDPA to increase the transmission rate of MBMS

services.
Related factors: the transmission rate of MBMS services.
If this function is enabled, MBMS services can be carried by the
HSDPA channel, and thus the transmission rate is increased.
If this function is disabled, MBMS services cannot be carried by the
HSDPA channel, and thus the downlink transmission rate is limited.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.88 Inter System Handover with Consideration of Gsm Load

Support Indicator
Full Name
Inter System Handover with Consideration of Gsm Load Support

Indicator
Abbreviated Name
ldBsdIntSysHOInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an RNC should consider the load

state of the target cell when it determines to perform an inter-RAT
handover.
Instance
RNC
2-959
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-026
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicator of support for inter-system handover
with consideration of GSM load

Related factors:
If the parameter is set to Supported, the load of the target GSM cell
can be considered during handover from UMTS to GSM, to avoid
access failure due to overload in the GSM system. At the same
time, call drop may occur due to the limit of handover to GSM.
If the parameter is set to Not Supported, access failure may occur
due to overload in the GSM system.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-960
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.89 Fast Reconfiguration Support Indication

Full Name
Fast Reconfiguration Support Indication
Abbreviated Name
fastRecfgSptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter is the switch of fast reconfiguration function.

If the switch ON, RNC use fast reconfiguration in reconfiguration
procedure when NODEB and DRNC support fast reconfiguration
also.
If the switch OFF, RNC use synchronization reconfiguration in
reconfiguration procedure.
Instance
RNC and PLMN
ZWF21-01-024
0: not supported
1: supported
Unit
N/A
Default Value
0: not supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-961
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the switch that
controls whether the RNC selects the fast reconfiguration function.

Related factors: whether the RNC, NodeB and DRNC support the
fast reconfiguration function.
If this switch is enabled, the fast reconfiguration is enabled during
the reconfiguration procedure. The UE and UTRAN reconfiguration
take effects after the Uu synchronization succeeds, which may
shorten the time delay of reconfiguration procedure.
However, this function may consume more downlink scrambling
codes.
If this switch is disabled, the synchronous reconfiguration is enabled
in during the reconfiguration procedure. The UE and UTRAN
reconfiguration take effects after the activated CFN expires.
This parameter is disabled by default because the fast
Reason
reconfiguration is rarely used in most scenarios.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.90 AMR Inter Frequency Handover Switch

Full Name
AMR Inter Frequency Handover Switch
Abbreviated Name
amrIfHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-frequency AMR handover

is allowed or not.
2-962
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-03-003
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: AMR inter-frequency handover switch
Effect:
When the parameter is set to "On", the service continuity can be
ensured, and services of better quality can be provided for users.
In multi-carrier scenarios, the parameter is set to "Off" to avoid AMR
inter-frequency handover. This can simplify multi-carrier policies,
reduce the number of times that the compressed mode is activated,
and reduce the effect on system capacity.
The default parameter value is set based on the service continuity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-963
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.91 AMR Inter Rat Handover Switch

Full Name
AMR Inter Rat Handover Switch
Abbreviated Name
amrRatHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT AMR handover is

allowed or not.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: AMR inter-RAT handover switch
Effect:
In multi-system scenarios, the parameter is set to "Off" to avoid
AMR inter-RAT handover. This can simplify multi-system policies,
Reason
Change Take Effect
2-964
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.92 R99 RT Inter Frequency Handover Switch

Full Name
R99 RT Inter Frequency Handover Switch
Abbreviated Name
r99RtIfHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-frequency R99 RT

handover is allowed or not.
Instance
RNC
ZWF21-03-003
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-965
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: R99 RT inter-frequency handover switch
Effect:
In multi-carrier scenarios, the parameter is set to "Off" to avoid R99
RT inter-frequency handover. This can simplify multi-carrier policies,
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.93 R99 NRT Inter Frequency Handover Switch

Full Name
R99 NRT Inter Frequency Handover Switch
Abbreviated Name
r99NrtIfHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-frequency R99 NRT

Instance
RNC
ZWF21-03-003
2-966
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: R99 NRT inter-frequency handover switch
Effect:
In multi-carrier scenarios, the parameter is set to "Off" to avoid
R99 NRT inter-frequency handover. This can simplify multi-carrier
policies, reduce the number of times that the compressed mode is
activated, and reduce the effect on system capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.94 R99 RT Inter Rat Handover Switch

2-967
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
R99 RT Inter Rat Handover Switch
Abbreviated Name
r99RtRatHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT R99 RT handover is

allowed or not.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: R99 RT inter-RAT handover switch
Effect:
In multi-system scenarios, the parameter is set to "Off" to avoid R99
RT inter-RAT handover. This can simplify multi-system policies,
Reason
Change Take Effect
No
2-968
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.95 R99 NRT Inter Rat Handover Switch

Full Name
R99 NRT Inter Rat Handover Switch
Abbreviated Name
r99NrtRatHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT R99 NRT handover

is allowed or not.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-969
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: R99 NRT inter-RAT handover switch
Effect:
In multi-system scenarios, the parameter is set to "Off" to avoid R99
NRT inter-RAT handover. This can simplify multi-system policies,
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.96 HSDPA Inter Frequency Handover Switch

Full Name
HSDPA Inter Frequency Handover Switch
Abbreviated Name
hsdpaIfHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-frequency HSDPA

Instance
RNC
ZWF21-03-003
Handover Control FG
2-970
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: HSDPA inter-frequency handover switch
Effect:
HSDPA inter-frequency handover. This can simplify multi-carrier
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.97 HSDPA Inter Rat Handover Switch

Full Name
HSDPA Inter Rat Handover Switch
2-971
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
hsdpaRatHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT HSDPA handover is

allowed or not.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: HSDPA inter-RAT handover switch
Effect:
HSDPA inter-frequency handover considering that the GSM system
data capacity is limited. This can simplify multi-system policies,
Reason
Change Take Effect
No
2-972
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.98 HSUPA Inter Frequency Handover Switch

Full Name
HSUPA Inter Frequency Handover Switch
Abbreviated Name
hsupaIfHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-frequency HSUPA

Instance
RNC
ZWF21-03-003
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-973
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: HSUPA inter-frequency handover switch
Effect:
HSUPA inter-frequency handover. This can simplify multi-carrier
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.99 HSUPA Inter Rat Handover Switch

Full Name
HSUPA Inter Rat Handover Switch
Abbreviated Name
hsupaRatHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT HSUPA handover is

allowed or not.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
2-974
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: HSUPA inter-RAT handover switch
Effect:
HSUPA inter-frequency handover considering that the GSM system
data capacity is limited. This can simplify multi-system policies,
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.100 R99 RT Inter Rat (EUTRAN) Handover Switch

Full Name
R99 RT Inter Rat (EUTRAN) Handover Switch

2-975
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
r99RtEutraHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT R99 RT EUTRAN

Instance
RNC
ZWF21-03-110
Handover with LTE
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: R99 RT inter-RAT (EUTRAN) handover switch

This parameter indicates whether R99 RT EUTRAN inter-RAT
handover is allowed or not.If the parameter is "On", R99 RT services
will be allowed to be handed over to Eutran. If the parameter is
"Off", R99 RT will not be allowed to be handed over to Eutran, which
Reason
planning.
Change Take Effect
No
2-976
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.101 R99 NRT Inter Rat (EUTRAN) Handover Switch

Full Name
R99 NRT Inter Rat (EUTRAN) Handover Switch
Abbreviated Name
r99NrtEtraHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT R99 NRT EUTRAN

Instance
RNC
ZWF21-03-110
Handover with LTE
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-977
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: R99 NRT inter-RAT (EUTRAN) handover switch

This parameter indicates whether R99 NRT EUTRAN inter-RAT
handover is allowed or not.If the parameter is "On", R99 NRT
services will be allowed to be handed over to Eutran. If the
parameter is "Off", R99 NRT will not be allowed to be handed over
to Eutran, which may cause call drop.
Reason
planning.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.102 HSDPA Inter Rat (EUTRAN) Handover Switch

Full Name
HSDPA Inter Rat (EUTRAN) Handover Switch
Abbreviated Name
hsdpaEutraHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT HSDPA EUTRAN

Instance
RNC
ZWF21-03-110
Handover with LTE
2-978
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: HSDPA inter-RAT (EUTRAN) handover switch

This parameter indicates whether HSDPA EUTRAN inter-RAT
handover is allowed or not.If the parameter is "On", HSDPA services
"Off", HSDPA will not be allowed to be handed over to Eutran, which
Reason
planning.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.103 HSUPA Inter Rat (EUTRAN) Handover Switch

2-979
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
HSUPA Inter Rat (EUTRAN) Handover Switch
Abbreviated Name
hsupaEutraHoSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an inter-RAT HSUPA EUTRAN

Instance
RNC
ZWF21-03-110
Handover with LTE
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: HSUPA inter-RAT (EUTRAN) handover switch

This parameter indicates whether HSUPA EUTRAN inter-RAT
handover is allowed or not.If the parameter is "On", HSUPA services
"Off", HSUPA will not be allowed to be handed over to Eutran, which
Reason
planning.
Change Take Effect
No
2-980
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.104 Dynamic Update PO2 Switch

Full Name
Dynamic Update PO2 Switch
Abbreviated Name
dynaUpdtPO2Sw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to dynamically adjust the

PO2.PO2 is the power offset of the DPCH TPC field relative to the
data field.
Instance
RNC and PLMN
ZWF21-04-009
Power Control
Power Control FG
0: Off (Not Need Dynamic Update)

1: On (Need Dynamic Update)
Unit
N/A
Default Value
0: Off (Not Need Dynamic Update)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-981
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: This parameter indicates whether to
dynamically adjust the PO2.

Related factors: system capacity and Iub-interface bandwidth.
If this parameter is enabled, system capacity will be optimized but
the Iub interface will be added with an extra control frame (RADIO
INTERFACE PARAMETER UPDATE).
If this parameter is disabled, the transmit power of the DPCH TPC
field will be wasted but the Iub interface does not need to be added
with an extra control frame (RADIO INTERFACE PARAMETER
UPDATE).
When a cell is constrained by its downlink power resources, it is
recommended to enable this function.
Enabling or disabling this function depends primarily on the
Reason
bandwidth of the Iub interface.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.105 CS 64K RB Mode Switch

Full Name
CS 64K RB Mode Switch
Abbreviated Name
cs64RbModeSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-982
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the switch for CS 64k RB mode. If it is set

to "1", the RNC supports the SCUDIF function.
Instance
RNC
ZWF21-05-024
Video Call Fallback to Speech
Video Call Fallback to Speech FG
0: Not Support SCUDIF

1: Support SCUDIF, CS64 Service Established by a RB
Unit
N/A
Default Value
0: Not Support SCUDIF
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
Parameter function: switch for the SCUDIF (video call fall back)
function.
Related factor: On/Off status of the SCUDIF function.
If this parameter is set to "0", the RNC does not support the SCUDIF
function.
If this parameter is set to "1", the RNC supports the SCUDIF
function. When a UE shifts to a 2G coverage area from a 3G
network, the RNC initiates the Video Call Fallback to Speech
process according to the algorithm strategy for handover control.
When the service is fallen back to the AMR, the RNC initiates an
inter-system handover process for the AMR.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-983
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.16.106 Dedicated Priority Switch

Full Name
Dedicated Priority Switch
Abbreviated Name
dePriSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter is the switch of dedicated priority. When this function

is on, it could make expected UE camp on some frequency when
UEs leave CELL_DCH.
Instance
RNC
ZWF27-02-002
0: off
1: on
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-984
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: The parameter is the switch of dedicated
priority.
Rule: According to the requirement of operator. When operators
expect UE could camp on some frequency when it leaves
CELL_DCH, they can use this function.
The default value is set based on the carrier requirements.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.107 CDT-NAS Call Number Acquisition Switch

Full Name
CDT-NAS Call Number Acquisition Switch
Abbreviated Name
cdtNasCallNoAcqSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of NAS call number acquisition

for the CDT call record function.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
0: Off
1: On
Unit
N/A
2-985
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
1: on
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
switch of specific information acquisition for the CDT function.

Related factors: On/Off status of the information acquisition function
and RNC system performance.
If this parameter is set to "1" (On), the RNC system performance is
affected due to NAS coding stream analysis.
The default value is set to "0" (Off) to decrease the influence on
Reason

as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.108 CDT-NodeB Statistic Info Acquisition Switch

Full Name
CDT-NodeB Statistic Info Acquisition Switch
Abbreviated Name
cdtNodebStaInfoAcqSw
Managed Object

3GPP Name
N/A
2-986
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the switch of NodeB statistics acquisition

for the CDT call record function.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

affected due to NodeB statistics collection.
Reason

as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-987
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.16.109 CDT-Last Signalling Acquisition Switch

Full Name
CDT-Last Signalling Acquisition Switch
Abbreviated Name
cdtLastSigAcqSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of the last Iu/Uu signalling

acquisition for the CDT call record function.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
0: Off
1: On
Unit
N/A
Default Value
1: on
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

affected due to signalling stream logging.
2-988
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason

as required.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.110 CDT-NAS Messages Acquisition Switch

Full Name
CDT-NAS Messages Acquisition Switch
Abbreviated Name
cdtNasMsgSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the NAS message acquisition switch for

the CDT CR function.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
0: Off
1: On
Unit
N/A
Default Value
1: on
Related Parameters
N/A
2-989
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a network planning and
optimization parameter, used to indicate the NAS message

acquisition switch for the CDT CR function.
Related factors: whether the switch is turned on and the RNC
performance.
If this switch is turned on, the RNC performance is affected due to
the logging of signaling message code streams.
The default setting is "1: on", so that more information can be
Reason
collected without affecting the RNC performance.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.111 CDT-RAB Rate Acquisition Switch

Full Name
CDT-RAB Rate Acquisition Switch
Abbreviated Name
cdtRabRateSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-990
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the RAB rate acquisition switch for the
CDT CR function.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
0: Off
1: On
Unit
N/A
Default Value
1: on
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the RAB rate
acquisition switch for the CDT CR function.

Related factors: whether the switch is turned on and the RNC
performance.
If this switch is turned on, the RNC performance is affected due to
the logging of signaling message code streams.
The default setting is "1: on", so that more information can be
Reason
collected without affecting the RNC performance.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-991
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.112 Handover to E-UTRAN Penalty Timer

Full Name
Handover to E-UTRAN Penalty Timer
Abbreviated Name
hoToEutraPenTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates that this timer, specific to UEs, is initialized

upon handover failure from UMTS to EUTRAN. The RNC will not
handle EUTRAN inter-RAT measurement reports until the timer
expires.
Instance
RNC
ZWF21-03-110
Handover with LTE
(0..65535)s, step 1s
Unit
Default Value
20s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the interval to permit
the next handover after an inter-RAT handover fails.

Related factors: system resource, call drop rate, and handover
success rate
If the parameter is set to a large value, the interval to permit the
next handover is long, which may increase call-drop possibility due
to worse system quality.
If the parameter is set to a small value, the next handover will
be triggered shortly after the inter-RAT handover fails. Repeated
handover failures will occur, which will occupy more system
resources.
2-992
SJ-20141209142030-013|2015-11-12 (R1.3)
The default parameter value is set based on the system resources,
Reason
call drop rate, and handover success rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.113 Switch of whether to Punish the UE that can't Camp on

PCH state
Full Name
Switch of whether to Punish the UE that can't Camp on PCH state
Abbreviated Name
punishUePchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to punish the UE that cant camp

on PCH state.If PunishUePchSwch is"1: on", when UE is switched
to PCH from other state, count the time that UE is on PCH state. If
UE is switched to other channel when the time is less than 1 second,
UE will be not allowed to switch to PCH state again during the call
period to avoid the ping-pong between PCH and other state.
Instance
RNC
ZWF21-04-004
0: off
1: on
Unit
N/A
2-993
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets whether to punish the UE that cannot
stays in PCH status.

It is recommended to enable this switch, which can avoid ping-pong
adjustment.
Ping-pong can be avoided.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.114 Switch of Whether to transfer from HS-DSCH to DCH for

R5 UE's "PS Setup before CS" Concurrent Service
Full Name
Switch of Whether to transfer from HS-DSCH to DCH for R5 UE's

"PS Setup before CS" Concurrent Service
Abbreviated Name
csPlusPsR5UeSwch
Managed Object

3GPP Name
N/A
2-994
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates whether to transfer from HSDSCH to DCH

for R5 UE's "PS Setup before CS" when CsPlusPsSwch is on. For
the PS setup before CS scene, if both of CsPlusPsR5UeSwch and
CsPlusPsSwch are on, PS will downgrade from HSDSCH to DCH,
otherwise not.
Instance
RNC
ZWF21-05-026
0: off
1: on
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets whether to transfer from HS-DSCH to DCH
if a R5 UE is set to "PS Setup before CS".

Related factors: number of reconfiguration attempts and call drop
ratio.
It is recommended to disable this switch to decrease the call drop
ratio because of reconfiguration.
Off is recommended to reduce the call drops caused by fallback
Reason
reconfiguration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-995
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.16.115 CDT Record Number Threshold Per RRC Connection

Full Name
CDT Record Number Threshold Per RRC Connection
Abbreviated Name
cdtNumThdPerRrc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the number of CDT

records for each RRC connection.
Instance
RNC and PLMN
ZWF21-20-013
CDT FG
1..255
Unit
N/A
Default Value
255
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-996
SJ-20141209142030-013|2015-11-12 (R1.3)
threshold of the number of CDT records for each RRC connection.

Related factors: the average number of RABs per RRC connection,
whether to record all RAB information, and CDT data volume in the
RNC system.
If this parameter is set to a value other than "1" or "255", up to N
CDT records are logged for an RRC connection.
If this parameter is set to "1", only one CDT record is logged for
an RRC connection and RAB information may be lost. Multi CDT
records are not supported in that case.
If this parameter is set to "255", all RAB information is logged for
an RRC connection.
Note: Up to six pieces of information can be logged in a CDR record.
The default value is set to "255" to log all RAB information for an
Reason
RRC connection.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.116 Switch of the Smart Channel Switch Judgment of

CELL_DCH to CELL_FACH
Full Name
Switch of the Smart Channel Switch Judgment of CELL_DCH to

CELL_FACH
Abbreviated Name
smartD2FSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-997
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the Smart Channel Switch of

CELL_DCH to CELL_FACH is on or not.
Instance
RNC
N/A
N/A
0: off
1: on
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Function: Switch of the Smart Channel Switch of CELL_DCH to
CELL_FACH
Configuration Rule: It needs to consider the user experiences and
the utilization ratio of radio resources.
If the function is on, it can improve the utilization ratio of radio
resources.
And at the same time, the parameter dToFachThd is recommended
to be set to larger.
The reason of the parameter's default value is to consider the user
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-998
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.16.117 Time Threshold that Ue is on CELL_FACH/PCH, used

for the Smart Channel Switch Judgment of CELL_DCH to
CELL_FACH
Full Name
Time Threshold that Ue is on CELL_FACH/PCH, used for the Smart

Channel Switch Judgment of CELL_DCH to CELL_FACH
Abbreviated Name
fachPchTimeThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time threshold that Ue is on

CELL_FACH/PCH, used for the smart channel switch judgment
of CELL_DCH to CELL_FACH. If the time that Ue is on
CELL_FACH/PCH exceeds this threshold, and continuously satisfies
this condition SmartD2FtimesThr times, then the smart channel
switch strategy will be performed for the UE's next judgment of
CELL_DCH to CELL_FACH.
Instance
RNC
N/A
N/A
1..65535
Unit
Default Value
30
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-999
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: Time Threshold that Ue is on CELL_FACH/PCH, used for
the Smart Channel Switch Judgment of CELL_DCH to CELL_FACH

The value is larger, the smart channel switch of CELL_DCH to
CELL_FACH is more difficult;
The value is smaller, the smart channel switch of CELL_DCH to
CELL_FACH is easier.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.118 Counter Threshold for the Time Ue is on CELL_FACH/PCH

exceeds the Threshold FachPchTimeThr, Used for the Smart
Full Name
Counter Threshold for the Time Ue is on CELL_FACH/PCH exceeds

the Threshold FachPchTimeThr, Used for the Smart Channel Switch
Judgment of CELL_DCH to CELL_FACH
Abbreviated Name
smartD2FtimesThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1000
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the counter threshold for the time Ue is

on CELL_FACH/PCH exceeds the threshold FachPchTimeThr,
used for the smart channel switch judgment of CELL_DCH to
CELL_FACH. If the time that Ue is on CELL_FACH/PCH exceeds
FachPchTimeThr threshold, and continuously satisfies this condition
SmartD2FtimesThr times, then the smart channel switch strategy
will be performed for the UE's next judgment of CELL_DCH to
CELL_FACH.
Instance
RNC
N/A
N/A
1..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Function: Counter Threshold for the Time Ue is on CELL_FACH/PCH
exceeds the Threshold FachPchTimeThr, Used for the Smart

The value is larger, the smart channel switch of CELL_DCH to
CELL_FACH is more difficult;
The value is smaller, the smart channel switch of CELL_DCH to
CELL_FACH is easier.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
2-1001
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.16.119 Switch of the Smart Channel Switch Judgment of

URA/CELL_PCH to CELL_DCH
Full Name
Switch of the Smart Channel Switch Judgment of URA/CELL_PCH

to CELL_DCH
Abbreviated Name
smartP2DSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the smart channel switch of

URA/CELL_PCH to CELL_DCH is on or not.
Instance
RNC
N/A
N/A
0: off
1: on
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-1002
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: Switch of the Smart Channel Switch Judgment of
If the function is on, it can make the small data service be setup on
CELL_FACH and improve the utilization ratio of radio resources, but
also it may influence the user experience.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.120 Throughput Threshold for the Smart Channel Switch

Judgment of URA/CELL_PCH to CELL_DCH
Full Name
Throughput Threshold for the Smart Channel Switch Judgment of

Abbreviated Name
throughputThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1003
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the throughput threshold for the smart

channel switch judgment of URA/CELL_PCH to CELL_DCH. If
Ue's throughput does not exceed this threshold, and continuously
satisfies this condition SmartP2DtimesThr times, then next time
when the Ue has datas and needs to leave URA/CELL_PCH, the
Ue will be switched to CELL_FACH; Otherwise, the Ue will be
switched to CELL_DCH.
Instance
RNC
N/A
N/A
1..2^31
Unit
byte
Default Value
2048
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Function: Throughput Threshold for the Smart Channel Switch

The value is larger, the easier the small data service is setup
on CELL_FACH , and it can improve the utilization ratio of radio
resources, but also it may influence the user experience.;
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-1004
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.16.121 Counter Threshold for the Ue Throughput doesn't Exceed

the Threshold ThroughputThr, Used for the Smart Channel
Switch Judgment of URA/CELL_PCH to CELL_DCH
Full Name
Counter Threshold for the Ue Throughput doesn't Exceed the

Threshold ThroughputThr, Used for the Smart Channel Switch
Abbreviated Name
smartP2DtimesThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the counter threshold for the Ue throughput

doesn't exceed the threshold ThroughputThr, used for the smart
channel switch judgment of URA/CELL_PCH to CELL_DCH. If
Ue's throughput does not exceed this threshold ThroughputThr,
and continuously satisfies this condition SmartP2DtimesThr
times, then next time when the Ue has datas and needs to
leave URA/CELL_PCH, the Ue will be switched to CELL_FACH;
Otherwise, the Ue will be switched to CELL_DCH.
Instance
RNC
N/A
N/A
1..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1005
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Function: Counter Threshold for the Ue Throughput doesn't Exceed
the Threshold ThroughputThr, Used for the Smart Channel Switch

The value is smaller, the easier the small data service is setup
on CELL_FACH , and it can improve the utilization ratio of radio
resources, but also it may influence the user experience.;
The value is larger, the easier the data service is setup on
CELL_DCH , and it can improve the user experience, but also it may
influence the utilization ratio of radio resources.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.122 Switch of E-TTI Switching Triggered by UE Transmit

Power Measurement
Full Name
Switch of E-TTI Switching Triggered by UE Transmit Power

Measurement
Abbreviated Name
ettiUePwrSwch
Managed Object

2-1006
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the E-TTI transition switch based on the

UE transmit power. If this parameter is set to On, the switch is
enabled. If this parameter is set to Off, the switch is disabled.
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the E-TTI transition
switch based on the UE transmit power.

If this parameter is set to On, the dynamic E-TTI adjustment based
on the UE transmit power measurement can be implemented, and
the system capacity is increased.
If this parameter is set to Off, the dynamic E-TTI adjustment based
on the UE transmit power measurement cannot be implemented,
and the number of occurrences of the E-TTI reconfiguration is
reduced.
The reason that the default setting is "0: Off" is to reduce the times
Reason
of the E-TTI reconfiguration.
Change Take Effect
New Connection
No
How to Impact
N/A
2-1007
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.16.123 Switch of E-TTI Switching Whether Consider UE Channel

Quality and Cell Load
Full Name
Switch of E-TTI Switching Whether Consider UE Channel Quality

and Cell Load
Abbreviated Name
ettiQualLoadSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the UE channel quality and cell

loads are considered during the E-TTI transition. If this parameter is
set to On, when 10ms E-TTI transits to 2ms E-TTI, the UE channel
quality and cell loads should be considered as restrictive conditions.
If this parameter is set to Off, the considerations are not taken into
account.
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-1008
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the UE
channel quality and cell load are considered during the E-TTI
transition.
If this function is enabled, when 10ms E-TTI transits to 2ms E-TTI,
the UE channel quality must be good and the cell load must be
normal, which can improve the system capacity.
If this function is disabled, the UE channel quality and cell load are
not considered in the E-TTI transition, and more users use 2ms
E-TTI.
The reason that the default setting is "0: Off" is to improve the
Reason
system throughput.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.124 Ec/No Threshold Used for E-TTI Switching

Full Name
Ec/No Threshold Used for E-TTI Switching
Abbreviated Name
ettiEcN0Thres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Ec/N0 threshold for E-TTI transition. If

the CPICH Ec/N0 reported by the UE is higher than the threshold,
the UE channel quality is good. Otherwise, it is bad.
2-1009
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI
(-24..0)dB
Unit
dB
Default Value
-11
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the Ec/N0 threshold
for the E-TTI transition. If the CPICH Ec/N0 reported by the UE

is higher than the threshold, the UE channel quality is good.
Otherwise, it is bad.
Related factors: users' QoS experiences and the system throughput.
If the threshold is set too high, it is very difficult for users to satisfy
the good channel condition. This means that it is more difficult
to use 2ms E-TTI, which affects users' QoS experiences. If the
threshold is set too low, it is easier to use 2ms E-TTI, but the system
The default setting is based on the user's QoS experience and the
Reason
system throughput.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1010
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.125 Switch of the Channel Selection Strategy whether to be

decided by Traffic volume indicator IE of UE's Switching from
PCH to Other Channel
Full Name
Switch of the Channel Selection Strategy whether to be decided by

Traffic volume indicator IE of UE's Switching from PCH to Other
Channel
Abbreviated Name
pchToOtherTVISw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter controls whether the channel selection strategy is

determined by the traffic volume indicator IE when a UE transits
from PCH to another channel.
Instance
RNC
ZWF21-04-004
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1011
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter controls whether the channel
selection strategy is determined by the traffic volume indicator IE

when a UE transits from PCH to another channel.
Related factor: user experiences and the resource utilization.
If this function is enabled, when the UE (R6 and later versions)
transits from PCH to another channel, if the cell update message
carries the ""Traffic volume indicator"" IE(value: True), services are
carried in Cell_DCH status and the resource utilization is higher
(however, the user experiences may be affected). Otherwise,
services are carried in Cell_FACH status.
If this function is disabled, when the UE (R6 and later versions)
transits from PCH to another channel, the RNC determines whether
to establish the UE in dedicated or common status based on the
global switch without considering ""Traffic volume indicator"" IE
carried in the cell update message.
The default setting is based on the user experience and the radio
Reason
resource utilization.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.126 RSCP Threshold Used for E-TTI Switching

Full Name
RSCP Threshold Used for E-TTI Switching
Abbreviated Name
ettiRscpThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1012
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the RSCP threshold for E-TTI transition. If

the CPICH RSCP reported by the UE is higher than the threshold,
the UE channel quality is good. Otherwise, it is bad.
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI
(-120..-25 )dBm
Unit
dBm
Default Value
-88
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the RSCP threshold
for the E-TTI transition. If the CPICH RSCP reported by the UE

Otherwise, it is bad.
Configuration effect: users' QoS experiences and the system
throughput.
Reason
system throughput.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1013
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.16.127 Switch of HS-DSCH/E-DCH or HS-DSCH/DCH to DCH/DCH,

Used for CS+PS Scene
Full Name
Switch of HS-DSCH/E-DCH or HS-DSCH/DCH to DCH/DCH, Used

for CS+PS Scene
Abbreviated Name
csPsSceHsToDSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of switching an

HS-DSCH/E-DCH or HS-DSCH/DCH to a DCH/DCH, used for the
CS+PS scenario. For the CS+PS scenario, if this parameter is set
to "1: On", when there is no data, the PS service is switched from
the HS to the DCH.
Instance
RNC
ZWF21-05-026
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1014
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates the switch of switching an
HS-DSCH/E-DCH or HS-DSCH/DCH to a DCH/DCH, used for the

CS+PS scenario.
If the switch is on, for the CS+PS scenario, the channel transition
from the HS to the DCH can be implemented based on the traffic
volume. This reduces the impact on the CS dropped-call rate
caused by changes of the HS serving cell. However, this may also
affect the PS user experience.
If the switch is off, for the CS+PS scenario, the channel transition
from the HS to the DCH cannot be implemented based on the traffic
volume. Changes of the HS serving cell affect the CS dropped-call
rate.
The default value is set based on the PS user experience.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.128 Event 4B0 Counter Threshold for HS-DSCH to DCH, Used

for CS+PS Scene
Full Name
Event 4B0 Counter Threshold for HS-DSCH to DCH, Used for

CS+PS Scene
Abbreviated Name
hsToDE4B0timeThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1015
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum number of times (a 4B0

threshold) that the HS-DSCH/E-DCH or HS-DSCH/DCH can be
switched to the DCH/DCH, used for the CS+PS scenario.
Instance
RNC
ZWF21-05-026
1..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the maximum number of times (a 4B0
threshold) that the HS-DSCH/E-DCH or HS-DSCH/DCH can be

switched to the DCH/DCH, used for the CS+PS scenario.
Related factors: user experience and impact of changes of the
HS-DSCH serving cell on the CS dropped-call rate.
If this parameter is set to a greater value, it is more difficult to trigger
switching the HS-DSCH to the DCH, and changes of the HS-DSCH
serving cell affect the CS dropped-call rate.
If this parameter is set to a smaller value, it is easier to trigger
switching the HS-DSCH to the DCH. However, the data fluctuation
results in ping-pong reconfiguration.
The default value is set based on the user experience and impact of
Reason
changes of the HS-DSCH serving cell on the CS dropped-call rate.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-1016
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.16.129 The DCH Rate of PS Reconfigured, Used for CS+PS Scene

Full Name
The DCH Rate of PS Reconfigured, Used for CS+PS Scene
Abbreviated Name
csPsSceDchRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the rate after the PS service is reallocated

to the DCH, used for CS+PS scenario.
Instance
RNC
ZWF21-05-026
(0, 8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1017
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates the rate after the PS service is
reallocated to the DCH, used for CS+PS scenario.

Related factors: user experience and resource utilization.
If this parameter is set to a smaller value, the rate of the PS service
becomes smaller after the PS service is reconfigured to the DCH,
and the user experience is poorer. However, the impact of the PS
service on the CS service is less.
If this parameter is set to a greater value, the rate of the PS
service becomes greater after the PS service is reconfigured to the
DCH, and the user experience is better. However, this may waste
resources and the system load may increase.
The default value is set based on the resource utilization and user
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.130 Switch of the PS Service Channel allocation, Used for UE

in the CELL_FACH/PCH State Triggering CS Call
Full Name
Switch of the PS Service Channel allocation, Used for UE in the

CELL_FACH/PCH State Triggering CS Call
Abbreviated Name
fchPchUeCsPsSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1018
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the switch of the PS service channel

allocation when a UE in CELL_FACH state initiates the CS service.
If this parameter is set to "1: On", when a UE in CELL_FACH state
initiates the CS service, the PS service is reconfigured to the DCH,
and the rate is determined by the csPsSceDchRate parameter.
Instance
RNC
ZWF21-05-026
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the switch of the PS service channel
allocation when a UE in CELL_FACH state initiates the CS service.

If this parameter is set to "1: On", when a UE in CELL_FACH
state initiates the CS service, the system allocates the PS service
to the DCH instead of the HS channel. This reduces the impact
of HS-DSCH serving cell changes on the CS dropped-call rate.
However, the PS user experience is affected.
If this parameter is set to "0: Off", when a UE in CELL_FACH state
initiates the CS service, the system allocates the PS service to the
HS channel. HS serving cell changes affect the CS dropped-call
rate.
The default value is set based on the PS user experience.
Reason
Change Take Effect
Ongoing Connection
No
2-1019
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.131 Switch of D/D->HS/D or HS/E after HS/D or HS/E ->D/D

Full Name
Switch of D/D->HS/D or HS/E after HS/D or HS/E ->D/D
Abbreviated Name
dToHsDelaySwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to disallow the DCH/DCH to be

switched to the HS-DSCH/E-DCH or HS-DSCH/DCH after traffic
triggers switching from the HS-DSCH/E-DCH or HS-DSCH/DCH
to the DCH/DCH. If this parameter is set to "1: On", after traffic
triggers switching from the HS-DSCH/E-DCH or HS-DSCH/DCH
to the DCH/DCH, only when the dToHsDelayThr timer expires,
the DCH/DCH can be switched to the HS-DSCH/E-DCH or
HS-DSCH/DCH.
Instance
RNC
ZWF21-05-026
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-1020
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the switch of disallowing the DCH/DCH
to be switched to the HS-DSCH/E-DCH or HS-DSCH/DCH

after traffic triggers switching from the HS-DSCH/E-DCH or
HS-DSCH/DCH to the DCH/DCH.
If this parameter is set to "0: Off", after switching from the
HS-DSCH/E-DCH or HS-DSCH/DCH to the DCH/DCH is triggered,
it is more likely to trigger switching from the DCH/DCH to the
HS-DSCH/DCH or HS-DSCH/E-DCH. This results in ping-pong
adjustments and increases the risk of call drops.
If the switch is set to "1: On", after switching from the
HS-DSCH/E-DCH or HS-DSCH/DCH to the DCH/DCH is triggered,
, it is less likely to trigger switching from the DCH/DCH to the
HS-DSCH/DCH or HS-DSCH/E-DCH. However, this affects the user
experience.
The default value is set based on the user experience.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.132 RNC Switch for PS Redirection with LTE

Full Name
RNC Switch for PS Redirection with LTE
Abbreviated Name
rncPsRediLteSw
Managed Object

2-1021
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates whether the RNC supports PS redirection

with LTE. If the function is enabled, UEs supporting EUTRAN
measurement are permitted to be handed over to EUTRAN through
a redirection procedure. However, when RncPsHoLteSw and
RncPsRediLteSw are both "On", those UEs supporting PS handover
with EUTRAN will be switched to EUTRAN through a PS handover
procedure.
Instance
RNC
ZWF21-03-110
Handover with LTE
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for PS redirection to LTE
Related factor: network planning.

Adjustment suggestion: This parameter should be set based on
the network planning. When the conditions of PS handover from
UMTS to LTE are met but the UE or RNC side does not support PS
handover to LTE, it is recommended to turn on this switch if the UE
supporting LTE measurement is expected to obtain services in LTE.
This parameter is set based on the network planning.
Reason
Change Take Effect
No
2-1022
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.16.133 Switch of Transition to 0/0kps When PS Service Has No

Data
Full Name
Switch of Transition to 0/0kps When PS Service Has No Data
Abbreviated Name
noDataPs00Swch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the PS traffic rate can be

degraded to 0/0 kbps if there is no PS traffic. If this switch is
enabled, and the uplink and downlink traffic of a PS I/B service
is 0 in case of concurrent CS and PS services or concurrent PS
services, the PS traffic rate is decreased to 0/0 kbps. Otherwise, the
PS traffic rate is decreased to the DRBC minimum rate. If a link
exists at the DRNC side, the PS traffic rate can be decreased to 0/0
kbps only when the DRNC also supports PS 0/0.
Instance
RNC and PLMN
ZWF21-05-026
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
2-1023
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the PS traffic
rate can be degraded to 0/0 kbps if there is no PS traffic.

Related factors: user experience and service access rate.
If this switch is enabled, the PS traffic rate is decreased to 0/0
kbps in case of no PS traffic, which can result in degradation of
user experience on PS services. However, more resources can
be transferred to other services to improve the service access
rate. If this switch is disabled, the PS traffic rate is decreased to
the DRBC minimum rate in case of no PS traffic, which ensures
user experience on PS services. However, fewer resources can
be transferred to other services, which causes a decrease of the
service access rate.
The default value is set according to user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.16.134 Switch for Whether Forcing the PS Service to 0/0Kbps

When UE is in Bad Coverage Area for CS+PS Scene
Full Name
Switch for Whether Forcing the PS Service to 0/0Kbps When UE

is in Bad Coverage Area for CS+PS Scene
Abbreviated Name
csPsBadCovSwch
Managed Object
2-1024
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the PS traffic rate is forcibly

decreased to 0/0 kbps and kept unchanged in case of concurrent
CS and PS services if the corresponding UE is located in a weak
coverage area.
Instance
RNC and PLMN
ZWF21-05-026
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter determines whether the PS
traffic rate is forcibly decreased to 0/0 kbps and kept unchanged in

case of concurrent CS and PS services if the corresponding UE is
located in a weak coverage area.
Related factors: user experience on CS and PS services and
service access rate.
If this switch is enabled and the UE is located in a weak coverage
area, the PS traffic rate is forcibly decreased to 0/0 kbps in case of
concurrent CS and PS services and no increase of the PS traffic
rate is allowed. User experience on PS services degrades but user
experience on CS services is ensured. More resources can be
transferred to other services to improve the service access rate. If
this switch is disabled and the UE is located in a weak coverage
area, the PS traffic rate is not zero in case of concurrent CS and
PS services. User experience on PS services can be ensured.
However, more resources are consumed on PS services, which
2-1025
SJ-20141209142030-013|2015-11-12 (R1.3)
may result in degradation of user experience on CS services and

decrease of the service access rate.
The default value is set according to user experience on PS services.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.16.135 Preference For A Certain Encryption Algorithm

Full Name
Preference For A Certain Encryption Algorithm
Abbreviated Name
perferEncryAlgSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC is allowed to give

preference to a specific encryption algorithm.
Instance
RNC and PLMN
ZWF21-01-005
Ciphering
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
2-1026
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the RNC is
allowed to give preference to a specific encryption algorithm.

Related factors: network plan.
If this switch is enabled, the RNC selects the preferred encryption
algorithm for UEs as configured for the RNC.
If this switch is disabled, the RNC selects an encryption algorithm
according to the priorities configured by the CN.
The default value is set according to the common encryption
Reason
algorithm used in the network. This parameter can be configured

according to the actual encryption requirements of the operator.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.16.136 Encryption Algorithm for Preference

Full Name
Encryption Algorithm for Preference
Abbreviated Name
perferEncryAlg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1027
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the encryption algorithm that the RNC

prefers.
Instance
RNC and PLMN
ZWF21-01-005
Ciphering
0: UEA0
1: UEA1
2: UEA2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: encryption algorithm preferred by the RNC.
Related factors: network plan.

This parameter is set for the RNC if the operator requires a preferred
encryption algorithm.
The default value is set according to the common encryption
Reason
algorithm used in the network. This parameter can be configured

according to the actual encryption requirements of the operator.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2-1028
SJ-20141209142030-013|2015-11-12 (R1.3)
2.16.137 Dedicated priority RNC Switch

Full Name
Dedicated priority RNC Switch
Abbreviated Name
dePriRncSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter is an RNC-level switch that determines whether the

dedicated priority function is enabled or not. When this function is
enabled, the UEs in CELL_DCH state can camp on a frequency
after the UEs leave CELL_DCH.
Instance
RNC
ZWF27-02-002
0: Off
1: On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: The parameter is the RNC switch of dedicated
priority.
RuleAccording to the requirement of operator. When operators
expect UE could camp on some frequency when it leaves
CELL_DCH, they can use this function.
Reason
Change Take Effect
No
2-1029
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.16.138 Switch of Prohibiting PS Service Carried on

HS-DSCH/E-DCH for Concurrent CS+PS
Full Name
Switch of Prohibiting PS Service Carried on HS-DSCH/E-DCH for

Concurrent CS+PS
Abbreviated Name
csPlusPsHSEProhSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the HS-DSCH/E-DCH is prohibited

for a PS service in a concurrent CS and PS service scenario.
If it is set to "1: On", the UEs supporting the HS-DSCH/E-DCH
is prohibited to use the HS-DSCH/E-DCH for PS setup or
reconfiguration in a concurrent CS and PS service scenario. When
the HS-DSCH/DCH is used, the uplink DCH rate is the value of
ULogicalRnc.csPsSceHSDUlDchR.
Instance
RNC and PLMN
ZWF21-05-026
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
CsPlusPsSwch
2-1030
SJ-20141209142030-013|2015-11-12 (R1.3)
If csPlusPsHSEProhSwch and CsPlusPsSwch are both set to "1:
Parameters
On", only csPlusPsHSEProhSwch takes effect for the HSDPA UEs

establishing concurrent CS and PS services.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter is introduced to solve the problem of high CS call

drop rate on the HS-DSCH/E-DCH and improve the user experience
of downlink services carried on the DCH when there are concurrent
CS and PS services.
The default value is set based on the user experience about
Reason
throughput.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.16.139 The Uplink DCH Rate of PS Reconfigured to

DCH/DCH,Used for CS+PS Scene
Full Name
The Uplink DCH Rate of PS Reconfigured to DCH/DCH,Used for

CS+PS Scene
Abbreviated Name
csPsSceUlDchRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1031
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the uplink rate after a PS service is

reallocated to the DCH. It is used for the concurrent CS and PS
service scenario.
Instance
RNC
ZWF21-05-026
(0, 8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
16 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
Word
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the uplink DCH rate
after the PS service is reallocated to the DCH/DCH. It is used in

CS+PS scenarios.
and the user experience is worse. However, the impact of the PS
If this parameter is set to a larger value, the rate of the PS service
becomes faster after the PS service is reconfigured to the DCH, and
the user experience is better. However, It may waste resources
and increase the system load.
The default value is set based on resource utilization and user
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
2-1032
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
ADD
2.16.140 The downlink DCH Rate of PS Reconfigured to

DCH/DCH,Used for CS+PS Scene
Full Name
The downlink DCH Rate of PS Reconfigured to DCH/DCH,Used

for CS+PS Scene
Abbreviated Name
csPsSceDlDchRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink rate after a PS service is

reallocated to the DCH. It is used for the concurrent CS and PS
service scenario.
Instance
RNC
ZWF21-05-026
(0, 8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
8 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
Word
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1033
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the the downlink DCH
rate after the PS service is reallocated to the DCH/DCH. It is used in

CS+PS scenarios.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
ADD
2.16.141 Switch of PS service Channel Allocation for Concurrent

CS+PS for UE in CELL_DCH State
Full Name
Switch of PS service Channel Allocation for Concurrent CS+PS for

UE in CELL_DCH State
Abbreviated Name
dchUeCsPsSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1034
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is used to control channel allocation of PS services

for the UEs in CELL_DCH state when CS and PS services occur
concurrently. If this parameter is set to "1: On", the DCH/DCH is
allocated for the PS service if the PS service occurs after the CS
service. If the CS service occurs after the PS service and if the PS
service is carried on the HS, the HS is reconfigured to the DCH. If
this parameter is set to "0: Off", HS-DSCH/EDCH, HS-DSCH/DCH,
or DCH/DCH is allocated to the PS service based on the capability
of the UE.
Instance
RNC and PLMN
ZWF21-05-026
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
byte
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is used to control PS service
channel allocation in concurrent CS+PS cases for UEs in the

CELL_DCH State.
This parameter is introduced to solve the problem that the CS
dropped-call rate in the case of concurrent CS and PS services is
higher than that in the case of CS services.
If the CS dropped-call rate is higher in the case of concurrent CS
and PS services, this parameter is enabled, but it may affect the
user experience of PS services.
Reason
Change Take Effect
No
2-1035
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
add
2.16.142 The Uplink DCH Rate of PS Reconfigured to

HS-DSCH/DCH,Used for CS+PS Scene
Full Name
The Uplink DCH Rate of PS Reconfigured to HS-DSCH/DCH,Used

for CS+PS Scene
Abbreviated Name
csPsSceHSDUlDchR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink DCH rate after a PS service is

reallocated to the HS-DSCH/DCH. It is used for the concurrent CS
and PS service scenario.
Instance
RNC
ZWF21-05-026
(0, 8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
16 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
Parameter Type
2-1036
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the uplink DCH rate
after the PS service is reallocated to the HS-DSCH/DCH. It is used

in CS+PS scenarios.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
ADD
2.16.143 The Low Rate Threshold of the PS Service, Used for

CS+PS Scene
Full Name
The Low Rate Threshold of the PS Service, Used for CS+PS Scene
Abbreviated Name
csPsLowRateThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1037
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the low rate threshold of a PS service in a

concurrent CS and PS service scenario. In the concurrent CS and
PS service scenario with the PS service on DCH/DCH, if the UL
and DL DCH rates of the PS service are less than or equal to this
threshold, the rate of the PS service is considered to be low.
Instance
RNC and PLMN
ZWF21-05-026
(0, 8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
0 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
byte
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: low rate threshold of a PS service in a
concurrent CS and PS service scenario

In the concurrent CS and PS service scenario with the PS service
on DCH/DCH, if the UL and DL DCH rates of the PS service are
less than or equal to this threshold, the rate of the PS service is
considered to be low.
Related factors: operator's requirements and user experience with
PS services
If the parameter value is too large, the low rate conditions of the PS
service during a concurrent CS and PS procedure can be satisfied
too easily. In this case, the new measurement for the concurrent CS
and PS scenario (different from the measurement for the DRBC of a
single PS service) is used although the actual PS rate is not quite
low, which may decrease the user experience with the PS service.
If the parameter value is too small, the low rate conditions of the
PS service during a concurrent CS and PS procedure cannot be
satisfied easily. In this case, the old measurement for the DRBC of
a single PS service may be still used although the actual PS rate
is quite low, which may decrease the user experience with the PS
service.
2-1038
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on user experience with PS services.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.16.144 RNC Switch for PS Handover from LTE to UTRAN

Full Name
RNC Switch for PS Handover from LTE to UTRAN
Abbreviated Name
rncPsHoL2UtraSw
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates whether the RNC supports PS handovers

from LTE to UTRAN or not.
Instance
RNC and PLMN
ZWF21-03-110
Handover with LTE
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
2-1039
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for PS handovers from LTE to UTRAN
Related factor: network planning requirements

Adjustment suggestion: The parameter is set based on actual
network planning.
The default value is set based on actual network planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.16.145 CPICH EcNo Threshold Used for the Channel Type

Decision when Controlling the UE Transitioning from the
PCH State
Full Name
CPICH EcNo Threshold Used for the Channel Type Decision when
Controlling the UE Transitioning from the PCH State
Abbreviated Name
pchEcN0Thres
Managed Object
ULogicalRnc
3GPP Name
N/A
3GPP Reference
N/A
2-1040
SJ-20141209142030-013|2015-11-12 (R1.3)

Description
This parameter indicates the CPICH Ec/No threshold used to

determine the channel type when the UE is transitioned from the
PCH state. If the CPICH Ec/N0 reported by the UE is higher than
the threshold, the UE channel quality is good. Otherwise, it is bad.
When URncInfo.chSelFromPchInd is set to "3: Based on the Cell
Load and the Channel Quality", the UE is transitioned from PCH
state to the CELL_DCH state only when the channel quality is good
and the uplink and downlink load of the cell is normal; otherwise, the
UE is transitioned to the CELL_FACH state.
Instance
RNC
ZWF21-04-004
-24..0dB
Unit
dB
Default Value
-12 dB
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
Yes
Parameter function: This parameter indicates the CPICH Ec/No
threshold used for the channel type decision when controlling the UE
transitioning from the PCH state. If the CPICH Ec/N0 reported by
the UE is higher than the threshold, the UE channel quality is good.
Otherwise, it is bad.When URncInfo.chSelFromPchInd takes the
value of "3: Based on the Cell Load and the Channel Quality", only
when the channel quality is good and the uplink and downlink load of
the cell is normal, can the UE be transitioned from PCH state to the
CELL_DCH, otherwise it is transitioned to the CELL_FACH state.
Related factors: user experiences and the resource consumption.
the good channel condition. This means that it is more difficult to
be transitioned from PCH to the CELL_DCH, which affects user
experiences. If the threshold is set too low, it is more easily to be
2-1041
SJ-20141209142030-013|2015-11-12 (R1.3)

transitioned from PCH to the CELL_DCH, but more resource may
be consumed.
The default setting is based on the user experiences and the
Reason
resource consumption.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.14P01B001
Add
2.16.146 CPICH RSCP Threshold Used for the Channel Type

Decision when Controlling the UE Transitioning from the
PCH State
Full Name
CPICH RSCP Threshold Used for the Channel Type Decision when
Controlling the UE Transitioning from the PCH State
Abbreviated Name
pchRscpThres
Managed Object
ULogicalRnc
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RSCP threshold for transition from

PCH. If the CPICH RSCP reported by the UE is higher than the
threshold, the UE channel quality is good. Otherwise, it is bad.
When URncInfo.chSelFromPchInd is set to "3: Based on the Cell
Load and the Channel Quality", the UE is transitioned from PCH
state to the CELL_DCH state only when the channel quality is good
and the uplink and downlink load of the cell is normal; otherwise the
UE is transitioned to the CELL_FACH state.
2-1042
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
RNC
ZWF21-04-004
(-120..-25 )dBm
Unit
dBm
Default Value
-90 dBm
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
Yes
for transition from PCH. If the CPICH RSCP reported by the UE

Otherwise, it is bad.When URncInfo.chSelFromPchInd takes the
value of "3: Based on the Cell Load and the Channel Quality", only
when the channel quality is good and the uplink and downlink load of
the cell is normal, can the UE be transitioned from PCH state to the
CELL_DCH, otherwise it is transitioned to the CELL_FACH state.
Related factors: user experiences and the resource consumption.
the good channel condition. This means that it is more difficult to
be transitioned from PCH to the CELL_DCH, which affects user
experiences. If the threshold is set too low, it is more easily to be
transitioned from PCH to the CELL_DCH, but more resource may
be consumed.
The default setting is based on the user experiences and the
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
2-1043
SJ-20141209142030-013|2015-11-12 (R1.3)

Access
read/write
OMC Access path
V4.14.10.14P01B001
Add
2.16.147 RSCP Threshold Used for E-TTI Switching(Channel

Transition Scene)
Full Name
RSCP Threshold Used for E-TTI Switching(Channel Transition

Scene)
Abbreviated Name
ettiRscpThresChTr
Managed Object
ULogicalRnc
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RSCP threshold for E-TTI transition

used for channel transition to E-DCH. If the CPICH RSCP reported
by the UE is higher than the threshold, the UE channel quality is
good; otherwise, the UE channel quality is poor.
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI
(-120..-25 )dBm
Unit
dBm
Default Value
-90dBm
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
2-1044
SJ-20141209142030-013|2015-11-12 (R1.3)

Function Switch
Yes
for E-TTI transition used for channel transition to E-DCH. If the

CPICH RSCP reported by the UE is higher than the threshold, the
UE channel quality is good. Otherwise, it is bad.
Configuration effect: users' QoS experiences and the system
throughput.
Reason
system throughput.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V4.14.10.14P01B001
Add
2.16.148 Ec/No Threshold Used for E-TTI Switching (Channel

Transition Scene)
Full Name
Ec/No Threshold Used for E-TTI Switching (Channel Transition

Scene)
Abbreviated Name
ettiEcN0ThresChTr
Managed Object
ULogicalRnc
3GPP Name
N/A
3GPP Reference
N/A
2-1045
SJ-20141209142030-013|2015-11-12 (R1.3)

Description
This parameter indicates the Ec/N0 threshold for E-TTI transition

used for channel transition to E-DCH. If the CPICH Ec/N0 reported
by the UE is higher than the threshold, the UE channel quality is
good; otherwise, the UE channel quality is poor.
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI
-24..0dB
Unit
dB
Default Value
-13 dB
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
Yes
Parameter function: This parameter indicates the Ec/N0 threshold
for E-TTI transition used for channel transition to E-DCH. If the

CPICH Ec/N0 reported by the UE is higher than the threshold, the
UE channel quality is good. Otherwise, it is bad.
Related factors: users' QoS experiences and the system throughput.
Reason
system throughput.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
2-1046
SJ-20141209142030-013|2015-11-12 (R1.3)

OMC Access path
V4.14.10.14P01B001
Add
2.17 Qos Configuration Related to Logical Iur

Link(ULogicalIurQos)
2.17.1 Logical Iur Link Configuration Object ID
Full Name
Logical Iur Link Configuration Object ID
Abbreviated Name
ULogicalIurQosId
Managed Object
Qos Configuration Related to Logical Iur Link(ULogicalIurQos)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the logical Iur link

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1047
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->Qos Configuration Related to
Logical Iur Link
N/A
N/A
2.17.2 Used Iur Link

Full Name
Used Iur Link
Abbreviated Name
refUIurLink
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates reference to UIurLink object.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1048
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Logical Iur Link
N/A
N/A
2.17.3 Used Transport Bearer Type Profile Related to Basic Priority

Full Name
Used Transport Bearer Type Profile Related to Basic Priority
Abbreviated Name
refUTbTypeProfile
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the referenced UTbTypeProfile object

when the RNC office obtains transport QoS according to the
ARP/THP/TC. It is valid only when UpQosMapType of the UIurLink
object is set to 1.
2-1049
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Configure this parameter according to the transport type and QoS
mapping type on the Iur interface. This parameter is valid only when
UpQosMap of the UIurLink object is set to 1.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Logical Iur Link
N/A
N/A
2.17.4 Used Dedicated Service Transport Bearer Qos Profile

Full Name
Used Dedicated Service Transport Bearer Qos Profile
2-1050
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
refUDedSrvTbProfile
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the transport layer QoS profile parameter

mapping index for each adjacent Iur NE.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
enum: 0..255
Unit
N/A
Default Value
Set as 0 if the parameter is invalid, otherwise set default value for

various transmission scenarios: IP: 1 ATM+IP: 3 ATM: 4
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
When it is required to directly map the transmission layer QoS the
parameter from upper layer service type, this parameter should be

configured.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1051
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Logical Iur Link
N/A
N/A
2.18 QOS Function(UQosFunction)

2.18.1 QoS Function Object ID
Full Name
QoS Function Object ID
Abbreviated Name
UQosFunctionId
Managed Object
QOS Function(UQosFunction)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the QoS function.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1052
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->QOS Function
N/A
N/A
2.19 Qos Basic Configuration(UBasPri)

2.19.1 QoS Basic Configuration Object ID
Full Name
QoS Basic Configuration Object ID
Abbreviated Name
UBasPriId
Managed Object
Qos Basic Configuration(UBasPri)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the QoS basic priority

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1053
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->QOS Function->Qos Basic Configuration
N/A
N/A
2.19.2 Basic Priority

Full Name
Basic Priority
Abbreviated Name
basicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Basic Priority, used for identifying

the Basic Priority of a parameter in the configuration, and is not
adjustable.
Instance
RNC
2-1054
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-010
ZWF21-04-024
ZWF23-04-003
Congestion Control
User Differentiated Power Control
Load Balance for HSDPA Service
User Differentiated Power Control FG
0..DBS_RR_MAX_BP-1
Unit
N/A
Default Value
QosSeg
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates the Basic Priority, used for identifying
the Basic Priority of a parameter in the configuration, and is not

adjustable.
This parameter indicates the Basic Priority, and the values 015
Reason
must be configured.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1055
SJ-20141209142030-013|2015-11-12 (R1.3)
2.19.3 Power Offset of the Maximum Downlink DPCH Showing

Different Basic Priority
Full Name
Power Offset of the Maximum Downlink DPCH Showing Different

Basic Priority
Abbreviated Name
maxDlDpchPO
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power offset between the maximum

transmit power of the services with different basic priorities and the
DPCH maximum downlink transmit power.Therefore, users with
different priorities can have different maximum transmit powers.
Instance
RNC
ZWF21-04-024
(-50..0)dB, step 0.1dB
Unit
dB
Default Value
QosSeg
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1056
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the power offset
between the maximum transmit power of the services with different

basic priorities and the DPCH maximum downlink transmit power.
Related factors: system capacity and service quality
If the parameter value is too big, the actual maximum downlink
transmit power will be too big, which may affect system capacity.
If the parameter value is too small, the actual maximum downlink
transmit power will be too small, which may affect system capacity.
This parameter must be configured according to different maximum
downlink transmit power requirements for users with different basic
priorities. If there is no need to differentiate any maximum downlink
transmit power based on basic priorities, this parameter can be set
to 0.
When this parameter is set to 0, it indicates that there is no need
Reason
to differentiate any maximum downlink transmit power based on

basic priorities.
Change Take Effect
Ongoing Connection(at new radio link, radio link reconfiguration)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.19.4 Power Offset of the Maximum Uplink DPCH Showing

Different Basic Priority
Full Name
Power Offset of the Maximum Uplink DPCH Showing Different Basic

Priority
Abbreviated Name
maxUlDpchPO
Managed Object

3GPP Name
N/A
2-1057
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the power offset between the maximum

transmit power of the services with different basic priorities and
the DPCH maximum uplink transmit power.Therefore, users with
different priorities can have different maximum transmit powers.
Instance
RNC
ZWF21-04-024
Unit
dB
Default Value
QosSeg
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
between the maximum transmit power of the services with different

basic priorities and the DPCH maximum uplink transmit power.
If the parameter value is too big, the actual maximum uplink transmit
power will be too big, which may affect system capacity.
If the parameter value is too small, the actual maximum uplink
transmit power will be too small, which may affect system capacity.
This parameter must be configured according to different maximum
uplink transmit power requirements for users with different basic
priorities. If there is no need to differentiate any maximum uplink
transmit power based on basic priorities, this parameter can be set
to 0.
When this parameter is set to 0, it indicates that there is no need
Reason
to differentiate any maximum uplink transmit power based on basic

priorities.
Change Take Effect
Ongoing Connection(at new RB setup, RB configuration)
No
2-1058
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.19.5 Equivalent HSPA Users

Full Name
Equivalent HSPA Users
Abbreviated Name
hspaEquHsUser
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the equivalent HSPA users, which will be

used for calculating HSDPA throughput in load balance.
MAX_BP is the maximum number of the basic priorities, which is
set to 16.
Instance
UTRAN Cell
ZWF23-04-003
Load Balance for HSDPA Service
0.1..10, step 0.1
Unit
N/A
Default Value
[1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
2-1059
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: number of equivalent HSPA users
Related factors: basic priority

The larger the parameter is, the more resources the service will
occupy. The RNC will select a cell with more remaining resources
and accesses it.
The smaller the parameter is, the fewer resources the service will
occupy. The RNC will select a cell with more remaining resources
and accesses it.
Adjustment suggestion: For high priority users, for example, GBR
service, the parameter value can be more than 1.
The default parameter value is set based on load balance and
Reason
scenarios.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.19.6 DCH Uplink Nominal Bit Rate

Full Name
DCH Uplink Nominal Bit Rate
Abbreviated Name
ulNormBitRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1060
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the nominal bit rate of uplink

interactive/background services on DCH, which is related to the
Basic Priority. The higher the basic priority, the higher the nominal
bit rate of the service. In the DRBC scheduling, online services need
to be sorted. The services with a current rate smaller than the NBR
are put into the foremost set (set1), the services with a current rate
equal to the NBR are put into set2, and the services with a current
rate larger than the NBR are put into the last set (set3). The services
in each set are sorted according to their scheduling priorities (SP).
The foremost service is scheduled first.
Instance
RNC
ZWF21-04-010
Congestion Control
Unit
kbps
Default Value
QosSeg
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the nominal bit rate of
uplink interactive/background services on DCH.

Related factors: BP-related data throughput, and user experience.
The larger the BP-related parameter value, the higher the
corresponding data throughput, and the user experience is
improved.
The smaller the BP-related parameter value, the lower the
corresponding data throughput, and the user experience is affected.
The access delay of high priority users is decreased as far as
Reason
possible.
The BP-related data throughput and user experience are considered
to define this default value.
Change Take Effect
No
2-1061
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.19.7 DCH Downlink Nominal Bit Rate

Full Name
DCH Downlink Nominal Bit Rate
Abbreviated Name
dlNormBitRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Nominal Bit Rate (NBR) of downlink

interactive/background services on a DCH. It is mapped from the
Basic Priority. Traffic with a higher basic priority has a higher NBR.
DRBC queue scheduling needs to sequence online services. The
services with a current rate lower than the NBR are put into the
foremost set (set1), the services with a current rate equal to the
NBR are put into set2, and the services with a current rate higher
than the NBR are put into the last set (set3). Then the services in
each set are sequenced according to their Scheduling Priorities
(SPs). The service ranking foremost is scheduled first.
Instance
RNC
ZWF21-04-010
Congestion Control
Unit
kbps
Default Value
QosSeg
Related Parameters
N/A
2-1062
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the NBR of downlink
interactive/background services on a DCH.

Related factors: Basic Priority (BP)-related data throughput and
user experience.
If the parameter value related to a BP large, data throughput of
users with this BP is high and user experience is good.
If the parameter value related to a BP is small, data throughput of
users with this BP is low and user experience is bad.
Data throughput related to the basic priority and user perception
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.19.8 HS-DSCH Downlink Nominal Bit Rate

Full Name
HS-DSCH Downlink Nominal Bit Rate
Abbreviated Name
hsNormBitRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1063
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Nominal Bit Rate (NBR) of

interactive/background services on an HS-DSCH, which is related to
the basic priority. A higher-priority service has a higher NBR. The
hsNormBitRate is used as the minimum guaranteed bit rate for the
rapid scheduling of the NodeB HSDPA.
Instance
RNC
ZWF23-05-001
ZWF23-05-003
QoS Mapping for HSDPA Service

HSDPA Nominal Bit Rate for I/B Service
Unit
kbps
Default Value
QosSeg
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the nominal bit rate
(NBR) for interactive/background services on an HS-DSCH.

Related factors: data throughput related to the basic priority and
user perception.
If the parameter value related to a certain basic priority is larger, the
data throughput related to the basic priority and the user perception
will be improved.
If the parameter value related to a certain basic priority is smaller,
the data throughput related to the basic priority and the user
perception will be reduced.
For the default value of this parameter, data throughput related to
Reason
the basic priority and user perception are considered.
Change Take Effect
No
How to Impact
N/A
2-1064
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.19.9 E-DCH Uplink Nominal Bit Rate

Full Name
E-DCH Uplink Nominal Bit Rate
Abbreviated Name
edchNormBitRate
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Nominal Bit Rate (NBR) of

interactive/background services on an E-DCH, which is related to
the basic priority. A higher-priority service has a higher NBR. The
edchNormBitRate is used as the minimum guaranteed bit rate for
the rapid scheduling of the Node B HSUPA.
Instance
RNC
ZWF25-05-001
ZWF25-04-001
ZWF25-05-002
QoS Mapping for HSUPA Service

HSUPA Nominal Bit Rate for I/B Service
Unit
kbps
Default Value
QosSeg
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-1065
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the nominal bit rate
(NBR) for interactive/background services on an E-DCH.

Related factors: data throughput related to the basic priority and
user perception
If the parameter value related to a certain basic priority is larger, the
data throughput related to the basic priority and the user perception
will be improved.
If the parameter value related to a certain basic priority is smaller,
the data throughput related to the basic priority and the user
perception will be reduced.
For the default value of this parameter, data throughput related to
Reason
the basic priority and user perception are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.20 Basic Priority Mapping

Relationship(UBasPriMapping)
2.20.1 Basic Priority Mapping Relationship Object ID
Full Name
Basic Priority Mapping Relationship Object ID
Abbreviated Name
UBasPriMappingId
Managed Object
Basic Priority Mapping Relationship(UBasPriMapping)

3GPP Name
N/A
2-1066
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the object ID of the QoS basic priority

mapping relationship.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->Basic Priority Mapping Relationship
N/A
N/A
2.20.2 ARP Priority Level

2-1067
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
ARP Priority Level
Abbreviated Name
arpPL
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the priority level of Allocation/Retention

Priority (ARP), which matches the Iu parameter from CN. Values of
the Allocation/Retention Priority-->Priority Level parameter: spare
(0), highest (1), .., lowest (14), no priority (15). If the RNC receives
the value 0, it will convert 0 into 14.
Instance
RNC
ZWF21-05-002
QOS Guarantee FG
1..15
Unit
N/A
Default Value
BP_Default
Related Parameters
TrafficClass
All combinations of valid ArpPL and valid TrafficClass values must
Parameters
have a record in the UBasPriMapping object.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is the segment of Allocation/Retention Priority
(ARP) used in the mapping of Basic Priority (all combinations of

valid ArpPL and TrafficClass values must have a record in the
UBasPriMapping object), and is not adjustable.
In the mapping of Basic Priority, all the combinations of valid ARP
Reason
PL values and valid TrafficClass values must be set. This parameter

is not adjustable.
Change Take Effect
No
2-1068
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.20.3 Traffic Class

Full Name
Traffic Class
Abbreviated Name
trafficClass
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the traffic class comes from Traffic class
and THP(Traffic Handling Priority) in RAB assignment request. The
meaning of every value refer to the value range for this parameter.
Instance
RNC and PLMN
ZWF21-05-002
QOS Guarantee FG
0: Voice
1: Video
2: Streaming
3: Background
4..MAX_THP_SEGMENT+3, corresponding to the values of THP
segment of interactive services 1..MAX_THP_SEGMENT
19: Session Initiation Protocol
Unit
N/A
Default Value
BP_Default
Related Parameters
ArpPL
All combinations of valid ArpPL and TrafficClass values must have a
Parameters
record in the UBasPriMapping object.
Data Type
long
2-1069
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is the Traffic Class used in the mapping of Basic
Priority (all combinations of valid ArpPL and TrafficClass values must

have a record in the UBasPriMapping object), and is not adjustable.
This parameter is a QoS parameter and should be set based on
Reason
the operator's requirements. The default value comes from the

CSL's requirements in HK. If the operator has no specific QoS
requirement, the default value can be used in ordinary networks. In
the mapping of Basic Priority, all the combinations of valid ARPSeg
values and valid TrafficClass values must be set. This parameter is
not adjustable.
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A

Full Name
Basic Priority
Abbreviated Name
basicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Basic Priority, mapped from parameters

in RAB Assignment Request, such as ARP, Traffic Class and THP.
It is used for mapping Application Priority, Scheduling Priority, and
Access Control Priority in RRM.
2-1070
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC and PLMN
ZWF21-05-002
QOS Guarantee FG
0..15
Unit
N/A
Default Value
BP_Default
Related Parameters
ArpPL
TrafficClass
All combinations of valid ArpPL and valid TrafficClass values must
Parameters
have a record in the UBasPriMapping object.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: Basic Priority, mapped from RAB Assignment
Request, for example, ARP, Traffic Class and THP, used for mapping
Application Priority, Scheduling Priority, and Access Control Priority
in RRM.
Related factors: priorities of users with different ARP, Traffic Class
and THP in occupying radio resources.
Effect: The higher the Basic Priority is, the higher the priority of the
user is in occupying radio resources. The lower the Basic Priority is,
the lower the priority of the user is in occupying radio resources.
Adjustment suggestion: The principle is that the higher the ARP is,
the higher the Basic Priority is. For the same ARP, the higher the
TrafficClass (C>S>I>B) is, the higher the Basic Priority is. Therefore,
the higher the Basic Priority is, the higher the QoS priority that can
be enjoyed by the user is.
This parameter is a QoS parameter and should be set based on the
Reason
requirements of the operator. Adjustment suggestion of the default

value: For the same traffic class, the higher the ARPSeg is, and the
higher the Basic Priority is. For the same ARPSeg, the higher the
priority of traffic class is (C>S>I (the smaller the THP value is, the
higher the THP priority is)>B), the higher the Basic Priority is. If the
operator has no specific QoS requirement, the default value can
meet the general QoS requirements.
Change Take Effect
No
2-1071
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.21 Scheduling Priority Mapping Relationship

Profile(USchPriMappingProfile)
2.21.1 Scheduling Priority Mapping Relationship Profile Object ID
Full Name
Scheduling Priority Mapping Relationship Profile Object ID
Abbreviated Name
USchPriMappingProfileId
Managed Object
Scheduling Priority Mapping Relationship Profile(USchPriMappingProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the scheduling priority

mapping relationship profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
2-1072
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->QOS Function->Scheduling Priority

Mapping Relationship Profile
N/A
N/A
2.21.2 Scheduling Priority Index

Full Name
Scheduling Priority Index
Abbreviated Name
profileId
Managed Object
Scheduling Priority Mapping Relationship Profile(USchPriMappingProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the index in the Scheduling Priority

configuration. There are several different sets of Scheduling Priority
parameters at RNC level and different cells can use this parameter
to index different sets of configurations.
Instance
UTRAN Cell and PLMN
ZWF21-05-003
2-1073
SJ-20141209142030-013|2015-11-12 (R1.3)
Differentiated Service
QOS Guarantee FG
0..255
Unit
N/A
Default Value
SP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates the Scheduling Priority index, and the
value should be unique in RNC.
This parameter indicates the index in the Scheduling Priority
Reason
configuration. One set of parameters are configured by default.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2.22 Scheduling Priority Mapping

Relationship(USchPriMapping)
2.22.1 Scheduling Priority Mapping Relationship Object ID
2-1074
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Scheduling Priority Mapping Relationship Object ID
Abbreviated Name
USchPriMappingId
Managed Object
Scheduling Priority Mapping Relationship(USchPriMapping)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the scheduling priority

Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
2-1075
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Mapping Relationship Profile->Scheduling Priority Mapping
Relationship
N/A
N/A

Full Name
Basic Priority
Abbreviated Name
basicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Basic Priority, mapped from parameters

in RAB Assignment Request, for example, ARP, Traffic Class and
THP. It is used for mapping Scheduling Priority used in RRM.
Instance
UTRAN Cell and PLMN
ZWF21-05-003
QOS Guarantee FG
0..15
Unit
N/A
Default Value
SP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1076
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: Basic Priority used in the mapping of
Scheduling Priority (Scheduling Priority is mapped from Basic

Priority and Bear Type).
Related factors: Scheduling Priority of different Basic Priority users,
Adjustment suggestion: This parameter is the Basic Priority used in
the mapping of Scheduling Priority (Scheduling Priority is mapped
from Basic Priority and Bear Type), and is not adjustable. It is
suggested to use the default value if there is no special requirement.
In the mapping of Scheduling Priority, all the combinations of valid
Reason
BearerType values (DCH, HSPA, MBMS), and BasicPrio values

must be set. This parameter is not adjustable.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Relationship
N/A
N/A
2.22.3 Radio Bearer Type

Full Name
Radio Bearer Type
Abbreviated Name
bearerType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the radio bearer type, which is used for
mapping the Scheduling Priority.
Instance
UTRAN Cell and PLMN
2-1077
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-05-003
QOS Guarantee FG
0: DCH
1: HSPA
2: MBMS
Unit
N/A
Default Value
SP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: radio bearer type used in mapping of
Scheduling Priority (Scheduling Priority is mapped from Basic

Priority and Bear Type).
Related factors: Scheduling Priority of different Basic Priority users,
Adjustment suggestion: This parameter is the Bear Type used in the
mapping of Scheduling Priority (Scheduling Priority is mapped from
Basic Priority and Bear Type), and is not adjustable. It is suggested
to use the default value if there is no special requirement.
This parameter indicates a radio bearer type (DCH, HSPA or
Reason
MBMS). In the mapping of Scheduling Priority, all the combinations

of valid BearerType values and BasicPrio values must be set. This
parameter is not adjustable.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Relationship
2-1078
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.22.4 Scheduling Priority

Full Name
Scheduling Priority
Abbreviated Name
schPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Scheduling Priority (SP) mapped from

Basic Priority (BP) and bearer type. It is used for scheduling the real
queue and pre-emption.
Instance
UTRAN Cell and PLMN
ZWF21-05-003
QOS Guarantee FG
0..15
Unit
N/A
Default Value
SP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1079
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: Scheduling Priority mapped from Basic Priority
and Bearer Type, used for selecting pre-empted users in the

case of radio resource congestion, or scheduling users in the
access-refused queue to attempt to access the cell.
Related factors: Scheduling Priority of different Basic Priority and
Bearer Type Users, requirements of the operator.
Effect: This parameter indicates the Scheduling Priority that is
mapped from Basic Priority and Bearer Type. The higher the
parameter is, the higher the probability of being scheduled is, and
the higher the access success rate is. The smaller the parameter
is, the lower the probability of being scheduled is, and the lower the
access success rate is.
Adjustment suggestion: This parameter is the Basic Priority used in
the mapping of Scheduling Priority (Scheduling Priority is mapped
from Basic Priority and Bear Type), and is not adjustable. It is
suggested to use the default value if there is no special requirement.
Reason
the operator's requirements. Adjustment suggestion of the default

value: For the same Basic Priority, the higher the BearerType
(DCH, HSPA, MBMS) is, the higher the SchPrio is. For the same
BearerType, the higher the Basic Priority is, the higher the SchPrio
is. If the operator has no specific QoS requirement, the default value
can meet the general QoS requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Relationship
N/A
N/A
2-1080
SJ-20141209142030-013|2015-11-12 (R1.3)
2.23 Application Priority Mapping Relationship

Profile(UAppPriMappingProfile)
2.23.1 Application Priority Mapping Relationship Profile Object ID
Full Name
Application Priority Mapping Relationship Profile Object ID
Abbreviated Name
UAppPriMappingProfileId
Managed Object
Application Priority Mapping Relationship Profile(UAppPriMappingProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the application priority

mapping relationship profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-1081
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->QOS Function->Application Priority

N/A
N/A
2.23.2 Application Priority Index

Full Name
Application Priority Index
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the index in the Application Priority

configuration. There are several different sets of Application Priority
parameters at RNC level and different cells can use this parameter
to index these different sets of configurations separately. The
configuration parameter indicated by this index is used for selecting
users in congestion control and load control.
Instance
UTRAN Cell and PLMN
ZWF21-05-003
QOS Guarantee FG
0..255
Unit
N/A
Default Value
AP_Default
Related Parameters
N/A
N/A
Parameters
2-1082
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is the Application Priority configuration index. The
parameter value should be unique in RNC.
This parameter indicates an index in the Application Priority
Reason
configuration. By default, two sets of parameters are set (one for

congestion control and the other for overload control).
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2.23.3 Application Priority Configuration Scene

Full Name
Application Priority Configuration Scene
Abbreviated Name
intialAppPriUsingScene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the scenario of the Application Priority.

0: scenario used for load control algorithm; 1: scenario used for
congestion control algorithm.
Instance
RNC
ZWF21-05-003
2-1083
SJ-20141209142030-013|2015-11-12 (R1.3)
QOS Guarantee FG
0: Application Priority Configuration for Load Control

1: Application Priority Configuration for Congestion Control
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: scenario of the Application Priority. 0: scenario
used for load control algorithm. 1: scenario used for congestion

control algorithm.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2-1084
SJ-20141209142030-013|2015-11-12 (R1.3)
2.24 Application Priority Mapping

Relationship(UAppPriMapping)
2.24.1 Application Priority Mapping Relationship Object ID
Full Name
Application Priority Mapping Relationship Object ID
Abbreviated Name
UAppPriMappingId
Managed Object
Application Priority Mapping Relationship(UAppPriMapping)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the application priority

Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-1085
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path

Mapping Relationship Profile->Application Priority Mapping
Relationship
N/A
N/A

Full Name
Basic Priority
Abbreviated Name
basicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Basic Priority. It is used in the mapping

of the Application Priority.
Instance
UTRAN Cell
ZWF21-05-003
QOS Guarantee FG
0..15
Unit
N/A
Default Value
AP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1086
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter indicates the Basic Priority used in the mapping of
Application Priority, and is not adjustable.
In the mapping of Application Priority, all the combinations of valid
Reason
BearerType values, BasicPrio values, direction (UL or DL) values

and rateClass values must be set. This parameter is not adjustable.
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path

Relationship
N/A
N/A

Full Name
Radio Bearer Type
Abbreviated Name
bearerType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the radio bearer type, which is used for
mapping the Application Priority.
Instance
UTRAN Cell and PLMN
ZWF21-05-003
QOS Guarantee FG
0: DCH
1: HSPA
2: MBMS
2-1087
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
AP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is the radio bearer type used in the mapping of
Application Priority, and is not adjustable.
This parameter indicates the radio bearer type (DCH, HSPA or
Reason
MBMS). In the mapping of Application Priority, all the combinations

of valid BearerType values, BasicPrio values, direction (UL or DL)
values and rateClass values must be set. This parameter is not
adjustable.
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path

Relationship
N/A
N/A
2.24.4 Service Direction Used in Application Priority Mapping

Full Name
Service Direction Used in Application Priority Mapping
Abbreviated Name
direction
Managed Object

2-1088
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the service direction used in the mapping

of Application Priority. The Application Priority of an uplink is
mapped from the uplink rate, and that of a downlink is mapped from
the downlink rate.
Instance
UTRAN Cell and PLMN
ZWF21-05-003
QOS Guarantee FG
0: Uplink
1: Downlink
Unit
N/A
Default Value
AP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
This parameter indicates the service direction used in Application
Priority mapping. The uplink Application Priority is mapped from

the uplink rate, and downlink Application Priority is mapped from
the downlink rate.
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read
2-1089
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Relationship
N/A
N/A
2.24.5 Rate Class

Full Name
Rate Class
Abbreviated Name
rateClass
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the rate class used for mapping of Basic
Priority. Each class corresponds to a rate segment, that is, the
corresponding rate class will be used for mapping of Basic Priority
when the rate is within the rate segment.
Instance
UTRAN Cell
ZWF21-05-003
QOS Guarantee FG
0: <=16 kbps
1: (16, 64] kbps
2: (64, 128] kbps
3: (128, 384] kbps
4: >384 kbps
Unit
N/A
Default Value
AP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-1090
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: rate class used for mapping of Basic Priority.
This parameter is not adjustable, only be used to determine the

Basic Priority corresponding to each value of the parameter.
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path

Relationship
N/A
N/A
2.24.6 Application Priority

Full Name
Application Priority
Abbreviated Name
appPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Application Priority, which is mapped

from Basic Priority, bearer type and rate segment. It is used in load
control and congestion control. The Application Priority makes it
possible to provide higher rate to users with higher priority and lower
rate to users with lower priority.
Instance
UTRAN Cell and PLMN
2-1091
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-05-003
QOS Guarantee FG
0..15
Unit
N/A
Default Value
AP_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: Application Priority, which is mapped from
Basic Priority, BearType, Direction (DL or UL) and RateSeg, used

in overload control and congestion control for selecting users when
the cell load is high.
Related factor: When users with different Basic Priority, BearType,
and RateSeg exist at the same time, and the cell load is high, the
QoS of a certain type of users will be downgraded.
Effect: This parameter indicates the Application Priority mapped
from BearType (the Application Priority of MBMS is the highest, then
the Application Priority of HSPA, the Application Priority of DCH is
the lowest), Basic Priority (the higher the Basic Priority is, the higher
the Application Priority is), Direction (DL or UL) and RateSeg (the
higher the rate is, the lower the priority is). The higher the Application
Priority is, the lower the probability of being selected as the object
whose load is to be decreased is, and the higher the probability
of guaranteeing the QoS of high priority users is. The lower the
Application Priority is, the higher the probability of being selected
as the object whose load is to be decreased is, and the lower the
probability of guaranteeing the QoS of high priority users is.
should be set based on requirements of the operator.
2-1092
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
the operator's requirements. Adjustment suggestion of the default

value: Under the condition that the Basic Priority is divided into five
segments, and the Bearer Type is the same, the higher the Basic
Priority is, the higher the Application Priority is. Under the condition
that the Basic Priority is the same, the higher the priority of the
Bearer Type (MBMS > HSPA > DCH) is, the higher the Application
Priority is. If the operator has no specific QoS requirement, the
default value can meet the general QoS requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Relationship
N/A
N/A
2.25 Transport Bearer Type Profile Related to Basic

Priority (UTbTypeProfile)
2.25.1 Transport Bearer Type Profile Related to Basic Priority
Object ID
Full Name
Transport Bearer Type Profile Related to Basic Priority Object ID
Abbreviated Name
UTbTypeProfileId
Managed Object
Transport Bearer Type Profile Related to Basic Priority

(UTbTypeProfile)
3GPP Name
N/A
3GPP Reference
N/A
2-1093
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the object ID of the transport bearer type

profile related to basic priority.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->QOS Function->Transport Bearer Type
Profile Related to Basic Priority
N/A
N/A
2-1094
SJ-20141209142030-013|2015-11-12 (R1.3)
2.25.2 Profile ID of Transport Bearer Type Profile Related to Basic

Priority
Full Name
Profile ID of Transport Bearer Type Profile Related to Basic Priority
Abbreviated Name
profileId
Managed Object

(UTbTypeProfile)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the basic priority transport bearer type

index.
Instance
RNC
ZWF22-01-011
Transmission Path Protection on Iub
Transmission Path Protection on Iub FG
enum: 0..255
Unit
N/A
Default Value
default value for various transmission scenarios: ATM: 0 IP: 3

ATM+IP: 2
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Configure the basic priority transport bearer type index.
N/A
Reason
Change Take Effect
Unmodifiable
No
2-1095
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2.25.3 Transmission Mode

Full Name
Transmission Mode
Abbreviated Name
intialTransportModeScene
Managed Object

(UTbTypeProfile)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the transmission mode applicable to this

mapping, such as ATM, IP, and ATM+IP.
Instance
RNC
N/A
N/A
Basic Parameter
0, 1, 2, 3, 4, 5, 6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-1096
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the transmission mode.
Configuration rule: Configure this parameter according to the actual

The default value is applicable to the most common scenario.
Reason
This parameter should be configured according to the operating

environment.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2.26 Transport Bearer Type Related to Basic Priority

(UTbType)
2.26.1 Transport Bearer Type Related to Basic Priority Object ID
Full Name
Transport Bearer Type Related to Basic Priority Object ID
Abbreviated Name
UTbTypeId
Managed Object
Transport Bearer Type Related to Basic Priority (UTbType)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the transport bearer type

related to basic priority.
Instance
RNC
N/A
N/A
2-1097
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Profile Related to Basic Priority ->Transport Bearer Type Related
to Basic Priority
N/A
N/A

Full Name
Basic Priority
Abbreviated Name
basicPrio
Managed Object

2-1098
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the basic priority, which is a service priority

mapped from RAB parameters such as ARP, traffic class and THP.
It is used in other RRM priority mappings.
Instance
RNC
ZWF22-01-010
IP/ATM Hybrid Transmission
IP/ATM Hybrid Transmission FG
enum: (1..MAX_BP)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is the same as the basic priority and will be used to
map the transport bearer type in the following process. Zero is the
highest priority and 15 is the lowest priority. This parameter can
only be deleted with the relative items of the mapping, and cannot
be modified.
The default value is not usable. This parameter should be
Reason
configured according to the operating environment.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read
OMC Access path
to Basic Priority
2-1099
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Radio Bearer Type
Abbreviated Name
bearerType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Radio bearer type, range: DCH, HSPA, and MBMS.
Instance
RNC
ZWF22-01-010
enum:
0: DCH
1: HSPA
2: MBMS
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
The parameter is the same as the radio bearer type and will be
used to map transport bearer type in the following process. This

parameter can only be deleted with the relative items of the
mapping, and cannot be modified. The MBMS option is invalid for
an adjacent RNC NE.
2-1100
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason

environment.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read
OMC Access path
to Basic Priority
N/A
N/A
2.26.4 Transport Bearer Type

Full Name
Transport Bearer Type
Abbreviated Name
tbType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Transport bearer type, range: ATM and IP.
Instance
RNC
ZWF22-01-010
enum:
DBS_TBEARERTYPE_ATM (0): ATM
DBS_TBEARERTYPE_IPV4 (1): IPV4
Unit
N/A
2-1101
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
In the dual stack scenario, the TbType values of DBS_TBEAR-
ERTYPE_ATM and DBS_TBEARERTYPE_IP mean "ATM

Bear Type will be first selected" and "IP Bear Type will be first
selected" respectively. Therefore, even when TbType is set to
DBS_TBEARERTYPE_ATM, a valid value of IP DSCP should also
be configured.
Reason

environment.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path
to Basic Priority
N/A
N/A
2.26.5 DSCP for IP

Full Name
DSCP for IP
Abbreviated Name
ipDscp
Managed Object
2-1102
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DSCP value of the dedicated service

when the basic priority QoS mapping is used. It is available when
the transport bearer type is IP.
Instance
RNC
ZWF22-03-015
DiffServ Based QoS
RNC IP UTRAN FG
0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
The definition of DSCP varies with the router. Confirm the definition
of DSCP together with the operator.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
to Basic Priority
N/A
2-1103
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.26.6 Uplink Reserved Bandwidth for DCH I/B (or HSPA I/B) Traffic
Full Name
Uplink Reserved Bandwidth for DCH I/B (or HSPA I/B) Traffic
Abbreviated Name
ulResBwd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink bandwidth reserved for DCH

or HSPA I/B Traffic.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
Unit
kbps
Default Value
1 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Negotiate with operator to set the parameter. A larger value
increases the guaranteed bandwidth of an I/B service, but decreases

the total number of services that the system can accept.
Reason

environment.
Change Take Effect
New Connection
No
2-1104
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
to Basic Priority
N/A
N/A
2.26.7 Downlink Reserved Bandwidth for DCH I/B (or HSPA I/B)
Traffic
Full Name
Downlink Reserved Bandwidth for DCH I/B (or HSPA I/B) Traffic
Abbreviated Name
dlResBwd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink bandwidth reserved for DCH

or HSPA I/B Traffic.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
Unit
kbps
Default Value
1 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-1105
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Negotiate with operator to set the parameter. A larger value
increases the guaranteed bandwidth of an I/B service, but decreases

the total number of services that the system can accept.
Reason

environment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
to Basic Priority
N/A
N/A
2.27 Dedicated Service Transport Bearer Qos

Profile(UDedSrvTbProfile)
2.27.1 Dedicated Service Transport Bearer Qos Profile Object ID
Full Name
Dedicated Service Transport Bearer Qos Profile Object ID
Abbreviated Name
UDedSrvTbProfileId
Managed Object
Dedicated Service Transport Bearer Qos Profile(UDedSrvTbProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the dedicated service

transport bearer QoS profile.
2-1106
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->QOS Function->Dedicated Service

Transport Bearer Qos Profile
N/A
N/A
2.27.2 Transport Qos Profile parameter Index

Full Name
Transport Qos Profile parameter Index
Abbreviated Name
profileId
2-1107
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the transport QoS profile parameter index.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
1..48
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is generated by the system.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2-1108
SJ-20141209142030-013|2015-11-12 (R1.3)
2.27.3 Initial Transport Network Scene

Full Name
Initial Transport Network Scene
Abbreviated Name
intialTransportNetScene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial transport network scenario when

this mapping is used. There are 6 values that indicate 6 different
scenarios.
Instance
RNC
ZWF22-01-011
0..6
0: Two IP Paths
1: Three IP Paths
2: One ATM Path and Two IP Paths
3: Two ATM Paths
4: One IPOE Path and One IPOFE Path
5: One ATM Path and One IP Path
6: IUR traffic based on IPV6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Different values represent different transport network scenarios. For
example, 0 means the transport network scenario of double-VLAN

with IP, and 1 means three-VLAN with IP.
2-1109
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason

environment.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2.27.4 Dedicated Service Transport Bearer Qos Profile Template

Type
Full Name
Dedicated Service Transport Bearer Qos Profile Template Type
Abbreviated Name
templateType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the template type of the dedicated service

transport bearer QoS profile.
Instance
RNC
N/A
N/A
N/A
0, 1
Unit
N/A
Default Value
Related Parameters
N/A
2-1110
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2.28 Dedicated Service Transport Bearer Qos

Configuration(UDedSrvTb)
2.28.1 Dedicated Service Transport Bearer Qos Configuration
Object ID
Full Name
Dedicated Service Transport Bearer Qos Configuration Object ID
Abbreviated Name
UDedSrvTbId
Managed Object
Dedicated Service Transport Bearer Qos Configuration(UDedSrvTb)

3GPP Name
N/A
2-1111
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the object ID of the dedicated service

transport bearer QoS configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Transport Bearer Qos Profile->Dedicated Service Transport Bearer
Qos Configuration
N/A
N/A
2-1112
SJ-20141209142030-013|2015-11-12 (R1.3)
2.28.2 Traffic Category

Full Name
Traffic Category
Abbreviated Name
trafficCategory
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the traffic category of the mapping in use.
Instance
RNC
ZWF22-01-011
0 CS R99 Signal
1 HSDPA Signal
2 HSUPA Signal
3 R99 AMR
4 HSDPA AMR
5 HSUPA AMR
6 R99 Video
7 HSDPA Video
8 HSUPA Video
9 R99 CS conversational(D side)
10 R99 CS streaming
11 R99 PS conversational
12 R99 PS streaming
13 R99 PS interactive high priority
14 R99 PS interactive middle priority
15 R99 PS interactive low priority
16 R99 PS background
17 HSDPA conversational
18 HSDPA streaming HSDPA
19 HSDPA interactive high priority HSDPA
20 HSDPA interactive middle priority
21 HSDPA interactive low priority
22 HSDPA background
23 HSUPA conversational
24 HSUPA streaming HSUPA
25 HSUPA interactive high priority
2-1113
SJ-20141209142030-013|2015-11-12 (R1.3)
26 HSUPA interactive middle priority

27 HSUPA interactive low priority
28 HSUPA background
29 MBMS streaming
30 MBMS interactive high priority
31 MBMS interactive middle priority
32 MBMS interactive low priority
33 MBMS background
34 IMS Signalling
35 CS RsvdUser
36 PS RsvdUser
37 PS R99 Signalling
38 CS DimdUser
39 PS DimdUser
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Different values represent different traffic categories.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read
OMC Access path

Qos Configuration
N/A
2-1114
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.28.3 Transport Bearer Type for IUR Interface

Full Name
Transport Bearer Type for IUR Interface
Abbreviated Name
tbType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the transport bearer type for the Iur
interface.
Instance
RNC
ZWF22-01-011
enum:
DBS_TBEARERTYPE_ATM (0): ATM
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter should be configured according to the transport
bearer type of the IUR Interface.
N/A
Reason
Change Take Effect
New Connection
2-1115
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A
2.28.4 Transport Bearer Type 1 for IUB Interface

Full Name
Transport Bearer Type 1 for IUB Interface
Abbreviated Name
tbTypePara1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the first-priority transport bearer type for

the Iub interface.
Instance
RNC
ZWF22-01-011
2-1116
SJ-20141209142030-013|2015-11-12 (R1.3)
Enum value:
DBS_PATHTYPE_IPDOMAIN1
DBS_PATHTYPE_ATMRT
DBS_PATHTYPE_ATMNRT1
DBS_PATHTYPE_ATMMIX
0-Invalid
Unit
N/A
Default Value
set as DBS_PATHTYPE_IPDOMAIN1 when ProfileIndex

= 1 or 2, set as DBS_PATHTYPE_ATMRT when ProfileIndex
=3 or 4
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is limited by the transport network scenario. For
example, if the scenario is double-VLAN, the parameter can only

be set to IP domain 1 or IP domain 2. Please negotiate with the
operator to know its requirements, and then set the parameter. The
default value can satisfy most requirements. TbTypePara1 means
the first selected transport bearing type, TbTypePara2 means the
second, and so on.
Reason

environment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1117
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Qos Configuration
N/A
N/A

Full Name
Abbreviated Name
tbTypePara2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the second-priority transport bearer type

for the Iub interface.
Instance
RNC
ZWF22-01-011
Enum value:
DBS_PATHTYPE_ATMRT
DBS_PATHTYPE_ATMMIX
0-Invalid
Unit
N/A
Default Value

=3 or 4
Related Parameters
N/A
2-1118
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

second, and so on.
Reason

environment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A

Full Name
Abbreviated Name
tbTypePara3
Managed Object

3GPP Name
N/A
2-1119
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the third-priority transport bearer type for

the Iub interface.
Instance
RNC
ZWF22-01-011
Enum value:
DBS_PATHTYPE_ATMRT
DBS_PATHTYPE_ATMMIX
0-Invalid
Unit
N/A
Default Value

=3 or 4
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

second, and so on.
Reason

environment.
2-1120
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A

Full Name
Abbreviated Name
tbTypePara4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the fourth-priority transport bearer type

for the Iub interface.
Instance
RNC
ZWF22-01-011
2-1121
SJ-20141209142030-013|2015-11-12 (R1.3)
Enum value:
DBS_PATHTYPE_ATMRT
DBS_PATHTYPE_ATMMIX
0-Invalid
Unit
N/A
Default Value

=3 or 4
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

second, and so on.
Reason

environment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1122
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Qos Configuration
N/A
N/A

Full Name
Abbreviated Name
tbTypePara5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the fifth-priority transport bearer type for

Iub interface.
Instance
RNC
ZWF22-01-011
Enum value:
DBS_PATHTYPE_ATMRT
DBS_PATHTYPE_ATMMIX
0-Invalid
Unit
N/A
Default Value

=3 or 4
Related Parameters
N/A
2-1123
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

second, and so on.
Reason

environment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A

Full Name
Abbreviated Name
tbTypePara6
Managed Object

3GPP Name
N/A
2-1124
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the sixth-priority transport bearer type for

the Iub interface.
Instance
RNC
ZWF22-01-011
Enum value:
DBS_PATHTYPE_ATMRT
DBS_PATHTYPE_ATMMIX
0-Invalid
Unit
N/A
Default Value

=3 or 4
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

second, and so on.
Reason

environment.
2-1125
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A
2.28.10 DSCP for IP

Full Name
DSCP for IP
Abbreviated Name
ipDscp
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DSCP value of the dedicated service

when the mapping is used according to the traffic category.
Instance
RNC
ZWF22-03-015
DiffServ Based QoS
RNC IP UTRAN FG
Enum value: 0..63
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-1126
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
The DSCP definition varies with the router. Confirm the definition of
DSCP together with the operator.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A
2.28.11 Uplink Reserved Bandwidth for I/B Traffic

Full Name
Uplink Reserved Bandwidth for I/B Traffic
Abbreviated Name
iBUlResBwd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink bandwidth reserved for I/B traffic.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
2-1127
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
kbps
Default Value
0 for Non I/B service or HSDPA (TrafficCategory set as 19, 20, 21,
22) I/B service , 1 kbps for other I/B service
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Negotiate with the operator to set the parameter.
The default value is applicable to most scenarios.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A
2.28.12 Downlink Reserved Bandwidth for I/B Traffic

Full Name
Downlink Reserved Bandwidth for I/B Traffic
Abbreviated Name
iBDlResBwd
Managed Object

2-1128
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink bandwidth reserved for I/B

traffic.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
Unit
kbps
Default Value
0 for Non I/B service or HSUPA (TrafficCategory set as 25, 26, 27,
28) I/B service , 1 kbps for other I/B service
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Negotiate with the operator to set the parameter.
The default value is applicable to most scenarios.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Qos Configuration
N/A
N/A
2-1129
SJ-20141209142030-013|2015-11-12 (R1.3)
2.29 Access Control Profile Related to Basic Priority

(UBPriAcProfile)
2.29.1 Access Control Profile Related to Basic Priority Object ID
Full Name
Access Control Profile Related to Basic Priority Object ID
Abbreviated Name
UBPriAcProfileId
Managed Object
Access Control Profile Related to Basic Priority (UBPriAcProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the admission control

profile related to basic priority.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-1130
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->QOS Function->Access Control Profile
Related to Basic Priority
N/A
N/A
2.29.2 Basic Priority AC Index

Full Name
Basic Priority AC Index
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the index of the admission control

parameter related to the Basic Priority. For different requirements,
the set of parameters can be configured differently. Different cells
can use this parameter to index different configurations. The set of
parameters corresponding to this index is mapped from the Basic
Priority.
Instance
UTRAN Cell , PLMN, and Basic Priority Related
ZWF21-04-001
ZWF23-04-001
ZWF25-04-001
ZWF24-01-A
Admission Control
Admission Control for HSDPA Service
MBMS Introduction Package
MBMS FG
0..255
2-1131
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
BPriAc
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is only an index of CAC threshold and the value
should be unique in RNC.
This parameter indicates the cell index for admission control. By
Reason
default, one set of parameters are set.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2.29.3 Initial Load Scene

Full Name
Initial Load Scene
Abbreviated Name
intialloadscene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1132
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Initial Load Scene applicable to the

CAC threshold and other parameters, 0: Normal Load Cell; 1: High
Load Cell.
Instance
RNC
N/A
N/A
Basic ID parameter
0: Normal Load Cell

1: High Load Cell
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: Initial Load Scene applicable to the CAC
threshold and other parameters. 0: Normal Load Cell; 1: High

Load Cell.
This parameter is only used for ogject index during the MO creation
stage, not related to admission control threshold
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2-1133
SJ-20141209142030-013|2015-11-12 (R1.3)
2.30 Access Control Related to Basic Priority(UBPriAc)

2.30.1 Access Control Related to Basic Priority Object ID
Full Name
Access Control Related to Basic Priority Object ID
Abbreviated Name
UBPriAcId
Managed Object
Access Control Related to Basic Priority(UBPriAc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the admission control

related to basic priority.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-1134
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
Related to Basic Priority ->Access Control Related to Basic Priority
N/A
N/A
2.30.2 Basic Priority Used in Admission Control

Full Name
Basic Priority Used in Admission Control
Abbreviated Name
basicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Basic Priority used in the admission

control algorithm. Its value range is 016, where 015 is the real
value range for the Basic Priority, and 16 means handover.
Instance
UTRAN Cell and Basic Priority Related
ZWF21-04-001
ZWF23-04-001
ZWF25-04-001
ZWF24-01-A
Admission Control
MBMS FG
0..16
Where 0..15 is the real value range for the Basic Priority and 16
means handover.
Unit
N/A
2-1135
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
BPriAc
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
This parameter is the Basic Priority used in the mapping of AC
threshold, and is not adjustable.
This parameter is a QoS parameter and should be set based on the
Reason
operator's requirements. The default value comes from the CSL's

requirements in HK. If the operator has no specific QoS requirement,
the default value can be used in ordinary networks. This parameter
is the Basic Priority used in the mapping of AC threshold. All the
Basic Priority values must be set.
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.30.3 DCH Uplink AC Threshold

Full Name
DCH Uplink AC Threshold
Abbreviated Name
dchUlAcThresh
Managed Object

3GPP Name
N/A
2-1136
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the uplink RTWP threshold for DCH

admission. If the uplink interference exceeds this admission control
threshold, new service requests on DCH will not be admitted. This
parameter is set based on the Basic Priority.
Instance
ZWF21-04-001
Admission Control
(0.. 62)dB, step 0.1dB
Unit
dB
Default Value
BPriAc
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: uplink RTWP threshold for DCH admission
control.
If the uplink interference exceeds the admission control threshold,
new services on DCH will not be admitted. Different uplink RTWP
thresholds for DCH admission can be set for different BP users, and
some surplus can be reserved for overload control (the overload
threshold should be higher than the admission control threshold).
Related factors: UL DCH capacity, UL RTWP resource utilization
priority for users of different Basic Priorities, whether the cell will
be overloaded.
Effect: The larger the parameter is, the larger the uplink capacity
is, and the easier it is for the cell to be overloaded. The smaller the
parameter is, the smaller the uplink capacity is.
Adjustment suggestion: Because the RTWP reported from NodeB
fluctuates widely, to avoid error admission refusal, it is suggested
to set the UL DCH AC threshold to a larger value, for example the
default value, to disable the UL AC function in an indirect way.
2-1137
SJ-20141209142030-013|2015-11-12 (R1.3)
Because the RTWP reported from NodeB fluctuates widely, to avoid
Reason
error admission refusal, it is suggested to set the UL DCH AC

threshold to a large value, for example the default value, to disable
the UL AC function in an indirect way.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.30.4 DCH Downlink AC Threshold

Full Name
DCH Downlink AC Threshold
Abbreviated Name
dchDlAcThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink TCP threshold for DCH

admission. If the downlink power exceeds this admission control
threshold, new service requests on DCH will not be admitted. This
Instance
ZWF21-04-001
Admission Control
(1.. 100)%, step 1%
Unit
Default Value
BPriAc
2-1138
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
HsdpaAcThresh
HsdpaAcThresh >= DchDlAcThresh
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: downlink TCP CAC threshold for DCH
admission, a percentage relative to the maximum cell TCP. Different

downlink TCP thresholds for DCH admission can be set for different
BP users, and some surplus can be reserved for overload control
(the overload threshold should be higher than the admission control
threshold).
Related factors: power resource utilization rate (DL DCH capacity),
power resource utilization priority for users of different Basic Priority,
whether the cell will be overloaded.
Effect: The larger the parameter is, the larger the downlink capacity
parameter is, the smaller the downlink capacity is.
has no specific QoS requirement, the default value should be used.
(The handover threshold is higher than ordinary threshold. Keep the
cell capacity as high as possible under the condition that the cell
is not overloaded.)
Adjustment suggestion: 1. The handover CAC threshold should be
Reason
higher than the ordinary CAC threshold. 2. Get the highest cell
capacity under the condition that the cell is not overloaded.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1139
SJ-20141209142030-013|2015-11-12 (R1.3)
2.30.5 E-DCH AC Threshold

Full Name
E-DCH AC Threshold
Abbreviated Name
edchAcThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink RTWP threshold for E-DCH

admission. If the uplink interference exceeds this admission control
threshold, new service requests on E-DCH will not be admitted. This
Instance
ZWF25-04-001
(0.. 62)dB, step 0.1dB
Unit
dB
Default Value
BPriAc
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: uplink RTWP threshold for E-DCH admission
control. If the uplink interference exceeds the admission control

threshold, new services on E-DCH will not be admitted. Different
uplink RTWP thresholds for E-DCH admission can be set for
different services and BP users, and some surplus can be reserved
for overload control (the overload threshold should be higher than
the admission control threshold).
Related factors: UL E-DCH capacity, UL RTWP resource utilization
be overloaded.
2-1140
SJ-20141209142030-013|2015-11-12 (R1.3)
Adjustment suggestion: Because the RTWP reported from NodeB
fluctuates widely, to avoid error admission refusal, it is suggested to
set the UL E-DCH AC threshold to a larger value, for example the
default value, to disable the UL AC function in an indirect way.
Because the RTWP reported from NodeB fluctuates widely, to avoid
Reason
error admission refusal, it is suggested to set the UL E-DCH AC

threshold to a large value, for example the default value, to disable
the UL AC function in an indirect way.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.30.6 HSDPA AC Threshold

Full Name
HSDPA AC Threshold
Abbreviated Name
hsdpaAcThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink TCP threshold for HS-DSCH

threshold, new service requests on HS-DSCH will not be admitted.
This parameter is set based on the Basic Priority.
Instance
2-1141
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF23-04-001
(1..100)%, step 1%
Unit
Default Value
BPriAc
Related Parameters
DchDlAcThresh
HsdpaAcThresh >= DchDlAcThresh
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: downlink TCP threshold for HS-DSCH
admission control. If the downlink power exceeds the admission

control threshold, new services on HS-DSCH will not be admitted.
Different downlink TCP thresholds for HS-DSCH admission can
be set for different BP users, and some surplus can be reserved
for overload control (the overload threshold should be higher than
the admission control threshold).
Related factors: power resource utilization rate (DL HS-DSCH
capacity), power resource utilization priority for users of different
Basic Priorities, whether the cell will be overloaded.
Effect: The larger the parameter is, the larger the Streaming HSDPA
capacity is, and the easier it is for the cell to be overloaded. The
smaller the parameter is, the smaller the Streaming HSDPA capacity
is.
is not overloaded.)
Reason
Change Take Effect
No
2-1142
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.30.7 MBMS AC Threshold

Full Name
MBMS AC Threshold
Abbreviated Name
mbmsAcThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink TCP threshold for MBMS

threshold, new service requests on MBMS will not be admitted. This
Instance
ZWF24-01-A
MBMS FG
(1.. 100)%, step 1%
Unit
Default Value
BPriAc
Related Parameters
threshRefCount
ThreshRefCount<= MbmsAcThresh
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-1143
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: downlink TCP threshold for MBMS admission.
If the downlink power exceeds the admission control threshold, new

MBMS services will not be admitted. This parameter is set based
on the Basic Priority. Some surplus can be reserves for overload
control (the overload threshold should be higher than the admission
control threshold).
Related factors: power resource utilization rate (DL MBMS
capacity), power resource utilization priority for users of different
Basic Priorities, whether the cell will be overloaded.
Effect: The larger the parameter is, the larger the MBMS capacity
parameter is, the smaller the MBMS capacity is.
is not overloaded.)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.30.8 MBMS Load Threshold Reference for Counting

Full Name
MBMS Load Threshold Reference for Counting
Abbreviated Name
threshRefCount
2-1144
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the MBMS load threshold for

counting/recounting. If the cell load is greater than the threshold
indicated by this parameter, counting/recounting will be performed
and the PTP/PTM mode will be switched over based on the
counting/recounting result (PTM is switched to PTM mode based on
the counting/recounting result).
Instance
ZWF24-01-A
MBMS FG
(1.. 100)%, step 1%
Unit
Default Value
BPriAc
Related Parameters
MbmsAcThresh
ThreshRefCount<= MbmsAcThresh
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: MBMS load threshold for counting/recounting.
If the cell load is greater than the threshold indicated by this

parameter, counting/recounting will be performed and the PTP/PTM
mode will be switched over based on the counting/recounting result.
Related factors: QoS and capacity of MBMS.
Effect: The larger the parameter is, the better the MBMS QoS is,
and the smaller the MSMS capacity is. The smaller the parameter
is, and the poorer the MBMS QoS is.
(Keep the cell capacity as high as possible under the condition that
the MBMS QoS can be guaranteed.)
2-1145
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter is a QoS parameter. Adjustment suggestion: Get
Reason
the highest cell capacity under the condition that good traffic QoS
can be ensured.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.30.9 Code Tree Reserved Ratio

Full Name
Code Tree Reserved Ratio
Abbreviated Name
codeTreeResRto
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Code Tree Reserved Ratio, which

is used in the admission control algorithm based on Code Tree
Reserved Ratio, to reserve some code resources for users of a
certain service type. Another parameter used in this algorithm is the
reference SF layer, which indicates the SF of the reserved codes.
These two parameters should be used together, and the number
of reserved codes for the reference SF layer can be calculated by
using the Code Tree Reserved Ratio. This parameter is set based
on the Basic Priority.
Instance
ZWF21-04-001
ZWF23-01-A
ZWF24-01-A
2-1146
SJ-20141209142030-013|2015-11-12 (R1.3)
Admission Control
MBMS FG
(0..100)%, step 1%
Unit
Default Value
BPriAc
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: Code Resource Reserved Ratio, relative to
the operator's cell QoS strategy.

(When the Code Resource Occupied Ratio reaches the
CodeTreeResRto, the lower priority DCH service will be forbidden
to access the cell to reserve code resources for the higher priority
DCH service and to improve the access success rate of the higher
priority DCH service.)
Related factors: rejection rate of the high priority DCH service, code
resource occupancy.
Effect: The more the reserved code resources are, the fewer the
code resources that can be used by the DCH service of the current
priority are, and the more the code resource that can be used by the
DCH service of the priority higher than the current priority are. The
fewer the reserved code resources are, the more the code resources
that can be used by the DCH service of the current priority are, and
the fewer the code resource that can be used by the DCH service of
the priority higher than the current priority are.
Adjustment suggestion: This parameter is a QoS parameter
and should be set based on requirements of the operator. If the
operator has no specific QoS requirements, it is suggested to set
the parameter to "0" (not reserved), so that code resources can be
used by all users.
To maximize the utilization of code resources, the default value is set
Reason
to "0" (not reserved) so that all users can use the code resources.
2-1147
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.30.10 Uplink Admission Control Threshold Based on Equivalent

AMR User Number
Full Name
Uplink Admission Control Threshold Based on Equivalent AMR

User Number
Abbreviated Name
ulEquUserCacThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink admission control threshold

based on the equivalent AMR user number. If the equivalent AMR
user number exceeds this threshold after a new service is admitted,
the new service request will be rejected. The rejected service
request will be released or queued based on its QoS property. This
parameter is set based on the basic priority.
Instance
UTRAN Cell
ZWF21-04-001
ZWF25-04-001
Admission Control
Admission Control Based on Uplink Equivalent AMR User Number

FG
2-1148
SJ-20141209142030-013|2015-11-12 (R1.3)
1..255
Unit
N/A
Default Value
80
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether the cell
supports the Enhanced PCH function. This function is configured

based on the carrier's requirements.
Related factors: enhanced PCH capability of the cell and the
carrier's requirements (commercial agreement).
Adjustment suggestion: This parameter indicates whether the cell
supports the Enhanced PCH function and is not adjustable. This
function can improve the PCH performance and shorten the paging
delay. It is recommended to enable this function if possible.
The default value is set to the maximum AMR users that can be
Reason
supported per cell in a commercial network.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1149
SJ-20141209142030-013|2015-11-12 (R1.3)
2.30.11 Uplink Admission Control Threshold Based on Equivalent

AMR User Number
Full Name
Uplink Admission Control Threshold Based on Equivalent AMR

User Number
Abbreviated Name
ulEquUserCacThrd
Managed Object
UBPriAc
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink admission control threshold

based on the number of equivalent AMR users. If the number of
equivalent AMR users exceeds this threshold after a new service is
admitted, the new service request is rejected. The rejected call can
be released or queued based on its QoS priority. This parameter is
set based on the basic priority.
Instance
UTRAN Cell
ZWF21-04-001
ZWF25-04-001
Admission Control

FG
1..255
Unit
NA
Default Value
BPriAc
Related Parameters
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
NO
Function Switch
No
2-1150
SJ-20141209142030-013|2015-11-12 (R1.3)


function can improve the PCH performance and shorten the paging
The default value is set to the maximum AMR users that can be
Reason
supported per cell in a commercial network.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
UR14.1.05
Modify
2.30.12 Uplink AC Threshold for Normal Equivalent AMR Users

Load
Full Name
Uplink AC Threshold for Normal Equivalent AMR Users Load
Abbreviated Name
ulHighLdAcThresh
Managed Object
UBPriAc
3GPP Name
N/A
3GPP Reference
N/A
2-1151
SJ-20141209142030-013|2015-11-12 (R1.3)

Description
This parameter indicates the uplink AC threshold for normal load of

equivalent AMR users. If the load of uplink equivalent AMR users is
in normal state and the RoT of the cell exceeds this threshold, the
new uplink service requests in CELL_DCH state are not admitted.
This parameter is set based on the Basic Priority.
Instance
ZWF21-04-001
ZWF25-04-001
ZWF21-04-038
Admission Control
Equivalent User Number Based Admission Control

FG
(0.. 62)dB, step 0.1dB
Unit
dB
Default Value
BPriAc
Related Parameters
ulLowLdAcThresh

Parameters
Data Type
WORD
Parameter Type
Fixed
Negotiation With CN
NO
Function Switch
No
Parameter function: This parameter indicates the uplink AC
threshold for Normal Equivalent AMR Users Load. If the uplink

equivalent AMR users number load is in normal state and the RoT
of the cell exceeds this threshold, new uplink service requests
in CELL_DCH state will not be admitted.Different AC thresholds
can be set for users with different priorities, and some surplus is
reserved for overload control (the overload threshold should be
higher than the admission control threshold).
Related factors: UL RoT capacity, UL RoT resource utilization
be overloaded.
2-1152
SJ-20141209142030-013|2015-11-12 (R1.3)

Adjustment suggestion: The scene that the RoT load is high when
the equivalent AMR users number is in normal load state means
that the external interference is much for the cell. To improve the
cell's capacity, this parameter should be set to a larger value.
To improve the cell's capacity with larger external interference, this
Reason
parameter should be set to a larger value.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
V3.14.10.01B001
Add
2.30.13 Uplink AC Threshold for High Equivalent AMR Users Load

Full Name
Uplink AC Threshold for High Equivalent AMR Users Load
Abbreviated Name
ulLowLdAcThresh
Managed Object
UBPriAc
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink AC threshold for high load of

equivalent AMR users. If the load of uplink equivalent AMR users
is high and the RoT of the cell exceeds this threshold, the new
uplink service requests in CELL_DCH state are not admitted. This
Instance
ZWF21-04-001
ZWF25-04-001
ZWF21-04-038
2-1153
SJ-20141209142030-013|2015-11-12 (R1.3)

Admission Control
Equivalent User Number Based Admission Control

FG
(0.. 62)dB, step 0.1dB
Unit
dB
Default Value
BPriAc
Related Parameters
ulHighLdAcThresh

Parameters
Data Type
WORD
Parameter Type
Fixed
Negotiation With CN
NO
Function Switch
No
Parameter function: This parameter indicates the uplink AC
threshold for high equivalent AMR users load. If the uplink

equivalent AMR users number load is in high state and the RoT
of the cell exceeds this threshold, new uplink service requests
in CELL_DCH state will not be admitted.Different AC thresholds
can be set for users with different priorities, and some surplus is
reserved for overload control (the overload threshold should be
higher than the admission control threshold).
Related factors: UL RoT capacity, UL RoT resource utilization
be overloaded.
Adjustment suggestion: The scene that the RoT load is high when
the equivalent AMR users number is in high load state means that
the RoT load is mainly from the services of the cell. To guarantee the
service's quality online, this parameter should be set to a less value.
To improve the service performance for the cell whose RoT load
Reason
ismainly from the services of the cellc, this parameter should be

set to a less value.
Change Take Effect
New Connection
No
2-1154
SJ-20141209142030-013|2015-11-12 (R1.3)

How to Impact
N/A
Access
read/write
OMC Access path
V3.14.10.01B001
Add
2.31 User Authorized PLMN+SNAC

Information(UImsiSnacFilter)
2.31.1 User Authorized PLMN+SNAC Information Object ID
Full Name
User Authorized PLMN+SNAC Information Object ID
Abbreviated Name
UImsiSnacFilterId
Managed Object
User Authorized PLMN+SNAC Information(UImsiSnacFilter)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of authorized user

PLMN+SNAC relationship table.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1155
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->User Authorized PLMN+SNAC
Information
N/A
N/A
2.31.2 The Imsi Matched Digits Num

Full Name
The Imsi Matched Digits Num
Abbreviated Name
imsiMatchedDgtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When IMSI-based handover is performed, the RNC compares and

matches IMSIs. This parameter indicates the number of matched
IMSI digits.
Instance
RNC
2-1156
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-022
IMSI based Handover
1..15
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the IMSI range.
Configuration rule: When IMSI-based handover is enabled, this

parameter should be set. Otherwise, do not set it.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.31.3 The Imsi Matched Digit

Full Name
The Imsi Matched Digit
Abbreviated Name
imsiMatchedDigit
2-1157
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When IMSI-based handover is performed, the RNC compares and

matches IMSIs. This parameter indicates the matched digits in an
IMSI.
Instance
RNC
ZWF21-03-022
IMSI based Handover
0..9
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long[15]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the IMSI range length.

N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
2-1158
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.31.4 Number of Shared Network Code

Full Name
Number of Shared Network Code
Abbreviated Name
sNACNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of SNACs.
Instance
RNC
ZWF21-03-022
IMSI based Handover
0..10
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the number of SNACs.

N/A
Reason
Change Take Effect
New Connection
No
0
2-1159
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.31.5 MCC of Shared Network

Full Name
MCC of Shared Network
Abbreviated Name
sMCC
Managed Object

3GPP Name
MCC; Mobile Country Code
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the MCC of the network that is shared by

UEs that have the same MCC + MNC + Extend Information Digits
Num + Extend Information.
Instance
RNC
ZWF21-03-022
IMSI based Handover
0..999
Unit
N/A
Default Value
460
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_SPLMNSNAC]
Parameter Type
2-1160
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter indicates the shared MCC.
Configuration rule: If IMSI-based handover is enabled, this

China MCC
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.31.6 MNC of Shared Network

Full Name
MNC of Shared Network
Abbreviated Name
sMNC
Managed Object

3GPP Name
MNC; Mobile Network Code
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the MCC of the network that is shared by

Instance
RNC
ZWF21-03-022
2-1161
SJ-20141209142030-013|2015-11-12 (R1.3)
IMSI based Handover
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter indicates the shared MNC.

N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.31.7 Shared Network Area Code

Full Name
Shared Network Area Code
Abbreviated Name
sNAC
Managed Object
2-1162
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
SNAC; Shared Network Area Code
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the SNAC of the network that is shared by

Instance
RNC
ZWF21-03-022
IMSI based Handover
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter configures the authorized
SNAC.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1163
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Information
N/A
N/A
2.31.8 Selected PLMN for CN

Full Name
Selected PLMN for CN
Abbreviated Name
refUPlmnSpecFunction
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In a network sharing scenario, when IMSI-based handover is

executed, different SNACs can be used if the same IMSI registers in
different operators. This parameter indicates the registered PLMN
in the CN. If this parameter is not configured, the same SNAC is
used for all operators.
Instance
RNC
ZWF21-03-022
IMSI based Handover
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1164
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: registered PLMN in the CN
Configuration rule: If different operators must use different SNACs

for the same IMSI, this parameter must be configured. Otherwise, it
does not need to configure.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
N/A
OMC Access path
Information
Add
2.32 Reserved User Configuration (URsvdUeImsiList)

2.32.1 Reserved User Configuration ID
Full Name
Reserved User Configuration ID
Abbreviated Name
URsvdUeImsiListId
Managed Object
Reserved User Configuration (URsvdUeImsiList)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the reserved user

configuration.
Instance
RNC
N/A
N/A
N/A
2-1165
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Reserved User Configuration
N/A
N/A
2.32.2 IMSI Digits Number in Reserved User List for User

Identification
Full Name
IMSI Digits Number in Reserved User List for User Identification
Abbreviated Name
imsiDgtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1166
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the number of IMSI digits in a reserved

user list for user identification, which is used in conjunction with
the ImsiDgt[15] in the URsvdUeImsiList to determine whether an
IMSI is in the reserved user list. In the ZTE network, special QoS
parameters (for example, priority and power control) can be set
for IMSI in the reserved user list.
Instance
RNC
N/A
N/A
1..15
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates number of IMSI digits
in the reserved user list for user identification.

Related factor: IMSI range of reserved users.
Effects: the larger the parameter is, the less users in one Reserved
User List group is. the smaller theparameter is, the more users in
one Reserved User List group is.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1167
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.32.3 IMSI High-bit Digits in Reserved User List for User

Identification
Full Name
IMSI High-bit Digits in Reserved User List for User Identification
Abbreviated Name
imsiDgt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the IMSI high-bit digits in a reserved

user list for user identification, which is used in conjunction with
the ImsiDgtNum in the URsvdUeImsiList to determine whether an
IMSI is in the reserved user list. In the ZTE network, special QoS
for IMSI in the reserved user list.
Instance
RNC
N/A
N/A
0..9
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long[15]
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1168
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: IMSI high-order digits in the reserved user list
for user identification.

Related factors: user IMSI and number of IMSI digits.
Adjustment suggestion: This parameter should be set according to
the user IMSI and the number of IMSI digits to be identified.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.4 IMSI Active Indication for IMSI in Reserved User List

Full Name
IMSI Active Indication for IMSI in Reserved User List
Abbreviated Name
imsiActiveInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the IMSI activation indication for IMSIs

in the reserved user list. Only the users with active IMSI in the
reserved user list are reserved users.
Instance
RNC
N/A
N/A
0: Not Active
1: Active
2-1169
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
in the reserved user list. Only the users with active IMSI in the
reserved user list are reserved users.
This parameter indicates the IMSI active indication for IMSI in a
Reason
reserved user list. The default value is "not active". Whether to

activate the user should be decided by the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.5 Basic Priority of CS Domain for User in Reserved User List

Full Name
Basic Priority of CS Domain for User in Reserved User List
Abbreviated Name
csBasicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1170
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the basic priority of CS Domain service for

the Reserved User.
Instance
RNC
N/A
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter Function: This parameter indicates the basic priority of
services in the CS domain for the reserved user.

Related factor: basic priority of services in the CS domain for the
reserved user.
Effects: The larger the parameter is, the higher the UE priority in
using system resources is. The smaller the parameter is, the lower
the UE priority in using system resources is.
The users in the reserved user list have higher priority than common
Reason
users, so the default value is set to the highest priority.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1171
SJ-20141209142030-013|2015-11-12 (R1.3)
2.32.6 HSPA Scheduling Priority of CS Domain for User in Reserved

User List
Full Name
HSPA Scheduling Priority of CS Domain for User in Reserved User

List
Abbreviated Name
csHspaSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the HSPA Scheduling priority of CS

Domain service for the Reserved User.
Instance
RNC
N/A
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter Function: This parameter indicates the HSPA scheduling
priority of services in the CS domain for the reserved user.

Related factor: HSPA scheduling priority of services in the CS
domain for the reserved user.
Reason
Change Take Effect
New Connection
2-1172
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.7 Congestion Scheduling Priority of CS Domain for User in

Reserved User List
Full Name
Congestion Scheduling Priority of CS Domain for User in Reserved

User List
Abbreviated Name
csCgtSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Congestion Scheduling priority of CS

Domain service for the Reserved User.
Instance
RNC
N/A
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
2-1173
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter Function: This parameter indicates the congestion
scheduling priority of services in the CS domain for the reserved

user.
Related factor: congestion scheduling priority of services in the CS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.8 Application Priority of CS Domain for User in Reserved User

List
Full Name
Application Priority of CS Domain for User in Reserved User List
Abbreviated Name
csAppPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the application priority of CS Domain

service for Reserved User.
Instance
RNC
2-1174
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter Function: This parameter indicates the application
priority of services in the CS domain for the reserved user.

Related factor: application priority of services in the CS domain for
the reserved user.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1175
SJ-20141209142030-013|2015-11-12 (R1.3)
2.32.9 Basic Priority of PS Domain Service for User in Reserved

User List
Full Name
Basic Priority of PS Domain Service for User in Reserved User List
Abbreviated Name
psBasicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the basic priority of PS Domain Service for

the Reserved User.
Instance
RNC
N/A
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
services in the PS domain for the reserved user.

Related factor: basic priority of services in the PS domain for the
reserved user.
Reason
Change Take Effect
New Connection
No
2-1176
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.10 HSPA Scheduling Priority of PS Domain Service for User

in Reserved User List
Full Name
HSPA Scheduling Priority of PS Domain Service for User in

Reserved User List
Abbreviated Name
psHspaSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the HSPA Scheduling priority of PS

Domain Service for the Reserved User.
Instance
RNC
N/A
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-1177
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
priority of services in the PS domain for the reserved user.

Related factor: HSPA scheduling priority of services in the PS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.11 Congestion Scheduling Priority of PS Domain Service for

User in Reserved User List
Full Name
Congestion Scheduling Priority of PS Domain Service for User in

Reserved User List
Abbreviated Name
psCgtSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Congestion Scheduling priority of PS

Domain Service for the Reserved User.
Instance
RNC
N/A
2-1178
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
scheduling priority of services in the PS domain for the reserved

user.
Related factor: congestion scheduling priority of services in the PS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1179
SJ-20141209142030-013|2015-11-12 (R1.3)
2.32.12 Application Priority of PS Domain Service for User in

Reserved User List
Full Name
Application Priority of PS Domain Service for User in Reserved User

List
Abbreviated Name
psAppPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the application priority of PS Domain

Service for the Reserved User.
Instance
RNC
N/A
N/A
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
priority of services in the PS domain for the reserved user.

Related factor: application priority of services in the PS domain for
the reserved user.
Reason
Change Take Effect
New Connection
2-1180
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.13 Timer of Relocation Delay for CS Service of Reserved User

Full Name
Timer of Relocation Delay for CS Service of Reserved User
Abbreviated Name
rsvCsReDelayTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the length of the relocation delay timer for
the CS service of reserved users.
Instance
RNC
N/A
N/A
0..65535, step 1
Unit
100ms
Default Value
30
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-1181
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: If all radio links are handed over to DRNC, CS
relocation is performed for reserved users when this timer is expired.

Related factors: user experience, service interruption
The larger the parameter is, the more slowly the relocation is
triggered. The smaller the parameter is, the faster the relocation
is triggered.
Adjustment suggestion: For the CS service of reserved users, to
avoid service interruption and improve user experience, it is not
suggested to perform relocation.
Reserved Users' experence and service interruption are considered
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.32.14 Timer of Relocation Delay for PS Service of Reserved User

Full Name
Timer of Relocation Delay for PS Service of Reserved User
Abbreviated Name
rsvPsReDelayTimer
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the length of the relocation delay timer for
the PS service of reserved users.
Instance
RNC
N/A
2-1182
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0..65535, step 1
Unit
100ms
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: If all radio links handover to DRNC, PS
relocation is performed for Reserved users when this Timer is

expired.
Related factors: user experience, service interruption
The larger the parameter is, the more slowly the relocation is
triggered. The smaller the parameter is, the faster the relocation
is triggered.
Adjustment suggestion: For reserved users, to avoid service
interruption and improve user experience, it is not suggested to
perform relocation.
Reserved users' experence and service interruption are considered
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1183
SJ-20141209142030-013|2015-11-12 (R1.3)
2.33 Diamond User

Configuration(UDiamondUserImsiList)
2.33.1 Diamond User Configuration ID
Full Name
Diamond User Configuration ID
Abbreviated Name
UDiamondUserImsiListId
Managed Object
Diamond User Configuration(UDiamondUserImsiList)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the diamond user

configuration.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-1184
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Diamond User Configuration
N/A
N/A
2.33.2 IMSI Digits Number in Diamond User List for User

Identification
Full Name
IMSI Digits Number in Diamond User List for User Identification
Abbreviated Name
imsiDgtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of IMSI digits in the diamond

user list for user identification, which is used in conjunction with the
ImsiDgt[15] in the UDiamondUserImsiList to determine whether an
IMSI is in the diamond user list. In the ZTE network, special QoS
for IMSI in the diamond user list.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
1..15
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-1185
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: number of IMSI digits in the diamond user list
for user identification.

Related factors: IMSI range of users in the diamond user list.
The larger the parameter is, the fewer users in the diamond user list
are. The smaller the parameter is, the more users in the diamond
user list are.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.33.3 IMSI High-bit Digits in Diamond User List for User

Identification
Full Name
IMSI High-bit Digits in Diamond User List for User Identification
Abbreviated Name
imsiDgt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1186
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the IMSI high-order digits in diamond

user list for user identification, which is used in conjunction with the
ImsiDgtNum in the UDiamondUserImsiList to determine whether an
IMSI is in the diamond user list. In the ZTE network, special QoS
parameters (for example, priority and power control) can be set for
or IMSI in the diamond user list.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..9
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long[15]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: IMSI high-order digits in the diamond user list
for user identification

Related factors: user IMSI and number of IMSI digits.
This parameter should be set according to the user IMSI and the
number of IMSI digits to be identified.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1187
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.33.4 IMSI Active Indication for IMSI in Diamond User List

Full Name
IMSI Active Indication for IMSI in Diamond User List
Abbreviated Name
imsiActiveInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the IMSI Active Indication for IMSI in

diamond user list, only the users with active IMSI in diamond user
list are diamond users.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0: Not Active
1: Active
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
in the diamond user list. Only the users with active IMSI in the
diamond user list are diamond users.
This parameter indicates the IMSI active indication for IMSI in a
Reason
diamond user list. The default value is "not active". Whether to

activate the user should be decided by the operator.
Change Take Effect
New Connection
2-1188
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.33.5 Basic Priority of CS Domain Service for User in Diamond

User List
Full Name
Basic Priority of CS Domain Service for User in Diamond User List
Abbreviated Name
csBasicPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the basic priority of services in the CS

domain for users in the diamond user list. The basic priority of the
diamond user comes from this parameter.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-1189
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
services in the CS domain for the diamond user.

Related factor: basic priority of services in the CS domain for the
diamond users.
The users in the diamond user list have higher priority than common
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.33.6 HSPA Scheduling Priority of CS Domain Service for User

in Diamond User List
Full Name
HSPA Scheduling Priority of CS Domain Service for User in

Diamond User List
Abbreviated Name
csHspaSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the HSPA scheduling priority of services

in the CS domain for users in the diamond user list. The HSPA
scheduling priority of services in the CS domain for diamond users
comes from this parameter.
2-1190
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
priority of services in the CS domain for the diamond user.

Related factors: HSPA scheduling priority of services in the CS
domain for the diamond user.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1191
SJ-20141209142030-013|2015-11-12 (R1.3)
2.33.7 Congestion Scheduling Priority of CS Domain Service for

User in Diamond User List
Full Name
Congestion Scheduling Priority of CS Domain Service for User in

Diamond User List
Abbreviated Name
csCgtSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the congestion scheduling priority of

services in the CS domain for users in the diamond User List. The
congestion scheduling priority of services in the CS domain for
diamond users comes from this parameter.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
scheduling priority of services in the CS domain for the diamond

user.
Related factor: congestion scheduling priority of CS services for
the diamond user.
2-1192
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.33.8 Application Priority of CS Domain Service for User in

Diamond User List
Full Name
Application Priority of CS Domain Service for User in Diamond User

List
Abbreviated Name
csAppPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the application priority of services in the

CS domain for users in in the diamond user list. The application
priority of services in the CS domain for diamond users comes from
this parameter.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
2-1193
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
priority of services in the CS domain for the diamond user.

Related factor: application priority of CS services for the diamond
user.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.33.9 Basic Priority of PS Domain Service for User in Diamond

User List
Full Name
Basic Priority of PS Domain Service for User in Diamond User List
Abbreviated Name
psBasicPrio
Managed Object

3GPP Name
N/A
2-1194
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the basic priority of services in the PS

domain for users in the diamond user list. The basic priority of
services in the PS domain for diamond users comes from this
parameter.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
services in the PS domain for the diamond user.

Related factor: basic priority of services in the PS domain for the
diamond user.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1195
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.33.10 HSPA Scheduling Priority of PS Domain Service for User

in Diamond User List
Full Name
HSPA Scheduling Priority of PS Domain Service for User in

Diamond User List
Abbreviated Name
psHspaSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the HSPA scheduling priority of services

in the PS domain for users in the diamond user list. The basic
priority of services in the PS domain for diamond users comes from
this parameter.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1196
SJ-20141209142030-013|2015-11-12 (R1.3)
priority of services in the PS domain for the diamond user.

Related factor: HSPA scheduling priority of services in the PS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.33.11 Congestion Scheduling Priority of PS Domain Service for

User in Diamond User List
Full Name
Congestion Scheduling Priority of PS Domain Service for User in

Diamond User List
Abbreviated Name
psCgtSchPrio
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the congestion scheduling priority of

services in the PS domain for users in the diamond user list. The
congestion scheduling priority of services in the PS domain for
diamond users comes from this parameter.
Instance
RNC
ZWF21-05-027
2-1197
SJ-20141209142030-013|2015-11-12 (R1.3)
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
scheduling priority of services in the PS domain for the diamond

user.
Related factor: congestion scheduling priority of services in the PS
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1198
SJ-20141209142030-013|2015-11-12 (R1.3)
2.33.12 Application Priority of PS Domain Service for User in

Diamond User List
Full Name
Application Priority of PS Domain Service for User in Diamond User

List
Abbreviated Name
psAppPri
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the application priority of services in the

PS domain for users in the diamond user list. The application
priority of services in the PS domain for diamond users comes from
this parameter.
Instance
RNC
ZWF21-05-027
VIP Qos
VIP Qos FG
0..15
Unit
N/A
Default Value
15
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
priority of services in the PS domain for the diamond user.

Related factors: application priority of services in the PS domain for
the diamond user.
2-1199
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.34 LAC and SNAC Information(USnac)

2.34.1 LAC and SNAC Information Object ID
Full Name
LAC and SNAC Information Object ID
Abbreviated Name
USnacId
Managed Object
LAC and SNAC Information(USnac)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the LAC and SNAC

relationship table.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1200
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->LAC and SNAC Information
N/A
N/A

Full Name
Abbreviated Name
snac
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the SNAC that the location area belongs
to. One LAC can belong to up to four SNACs.
Instance
RNC
2-1201
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-022
IMSI based Handover
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the authorized
SNAC.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.34.3 Used Location Area

Full Name
Used Location Area
Abbreviated Name
refULocationArea
2-1202
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter identifies a location area. An LAC is a component of

an LAI (LAI = MCC + MNC + LAC).
Instance
RNC
ZWF21-03-022
IMSI based Handover
1..0xfffd, 0xffff
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string[DBS_RR_MAX_NUM_LAC_PER_SNAC]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the authorized LAC.

N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1203
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.35 Golden/Silver/Bronze Category List of RRC

Establishment(URrcCategoryMapping)
2.35.1 RRC Establishment Category Mapping Object ID
Full Name
RRC Establishment Category Mapping Object ID
Abbreviated Name
URrcCategoryMappingId
Managed Object
Golden/Silver/Bronze Category List of RRC Establishment(URrcCategoryMapping)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the RRC establishment

category mapping.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1204
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->Golden/Silver/Bronze Category

List of RRC Establishment
N/A
N/A

Full Name
RRC Establishment Cause
Abbreviated Name
rrcSetupCause
Managed Object

3GPP Name
Establishment cause
3GPP Reference
TS 25.331
Description
This parameter indicates the cause for an RRC connection

establishment request. The establishment cause is map to an
establishment category (golden, silver, or bronze), which is used to
identify the priority for the RRC connection establishment request.
Instance
RNC and PLMN
ZWF21-05-003
ZWF21-01-012
QOS Guarantee FG
2-1205
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Originating Conversational Call,

1: Originating Streaming Call,
2: Originating Interactive Call,
3: Originating Background Call,
4: Originating Subscribed traffic Call,
5: Terminating Conversational Call,
6: Terminating Streaming Call,
7: Terminating Interactive Call,
8: Terminating Background Call,
9: Emergency Call,
10: Inter-RAT cell re-selection,
11: Inter-RAT cell change order,
12: Registration,
13: Detach,
14: Originating High Priority Signalling,
15: Originating Low Priority Signalling,
16: Call re-establishment,
17: Terminating High Priority Signalling,
18: Terminating Low Priority Signalling,
19: Terminating cause unknown,
20: MBMS reception,
21: MBMS ptp RB request,
22: Delay Tolerant Access,
23: Others
Unit
N/A
Default Value
RrcCategory_Default
Related Parameters
RrcSetupCategory
Every value of RrcSetupCause must have one corresponding value
Parameters
of RrcSetupCategory.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1206
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter is used for mapping an RRC
connection establishment request to a category according to the

cause. The category determines the priority of the corresponding
RRC connection establishment request.
Related factors: basic priorities corresponding to different causes
of RRC connection establishment requests.
Adjustment suggestion: Each RRC connection establishment cause
must be mapped to a category. This parameter must be configured
according to the operator requirements.
In accordance with the common priority classification, RRC
Reason
establishment for CS service belong to one category, RRC

establishment for PS service belong to another category, and RRC
establishment due to the other causes belong to the third category.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read only
OMC Access path

V4.14.10.14
Modify
2.35.3 Golden/Silver/Bronze Category of RRC Establishment

Full Name
Golden/Silver/Bronze Category of RRC Establishment
Abbreviated Name
rrcSetupCategory
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the category of an RRC connection

establishment cause. The category is used to identify the priority for
the RRC connection establishment.
2-1207
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC and PLMN
N/A
N/A
0: Golden RRC
1: Silver RRC
2: Bronze RRC
Unit
N/A
Default Value
RrcCategory_Default
Related Parameters
RrcSetupCause
Every value of RrcSetupCause must have one corresponding value
Parameters
of RrcSetupCategory.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

RRC establishment request.
Reason

establishment due to the other causes belong to the thrid category.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1208
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

V4.13.10.15/V3.13.10.15
ADD

Full Name
Service Category Based on RRC Establishment Cause
Abbreviated Name
rrcSetupServiceCat
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the service categories (CS Call, PS Call,

and Others) based on RRC connection establishment causes. For
different categories, whether to attempt CELL_FACH access or not
after admission rejection on CELL_DCH can be flexibly configured.
Instance
RNC and PLMN
ZWF21-01-012
0: CS Call
1: PS Call
2: Others
Unit
NA
Default Value
RrcCategory_Default
Related Parameters
RrcSetupCause
Every RrcSetupCause value must be configured with an
Parameters
rrcSetupServiceCat value.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1209
SJ-20141209142030-013|2015-11-12 (R1.3)
connection establishment request to a service category according to

the request cause.
Related factor: service type of the corresponding RRC establishment
request.
must be mapped to a service category. This parameter must be
configured according to the operator requirements.
The default value is set based on RRC establishment causes: "0:
Reason
CS Call" for a CS service, "1: PS Call" for a PS service, and "2:

Others" for the causes other than these two categories.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path

V4.14.10.14
Modify
2.36 Basic Priority List of RRC Setup

category(URrcCategoryBasPriMapping)
2.36.1 RRC Establishment Category Basic Priority Mapping Object
ID
Full Name
RRC Establishment Category Basic Priority Mapping Object ID
Abbreviated Name
URrcCategoryBasPriMappingId
Managed Object
Basic Priority List of RRC Setup category(URrcCategoryBasPriMapping)

3GPP Name
N/A
2-1210
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the object ID of the RRC establishment

category basic priority mapping.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->Basic Priority List of RRC Setup
category
N/A
N/A
2-1211
SJ-20141209142030-013|2015-11-12 (R1.3)
2.36.2 Golden/Silver/Bronze Category of RRC Establishment

Full Name
Golden/Silver/Bronze Category of RRC Establishment
Abbreviated Name
rrcSetupCategory
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the basic priority corresponding to an RRC

connection establishment category (golden, silver, or bronze).
Instance
RNC and PLMN
N/A
N/A
0: Golden RRC
1: Silver RRC
2: Bronze RRC
Unit
N/A
Default Value
RrcCategory_Default
Related Parameters
BPforRrcCategory
Every value of RrcSetupCategory must have one corresponding
Parameters
value of BPforRrcCategory.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the basic priority
corresponding to an RRC connection establishment category.

Effect: The higher the basic priority is, the better QoS the
corresponding RRC connection establishment request has. The
lower the basic priority is, the lower priority the corresponding RRC
connection establishment request has for using radio resources.
2-1212
SJ-20141209142030-013|2015-11-12 (R1.3)
Adjustment suggestion: A basic priority must be configured for each

RRC connection establishment category. This parameter must be
The default value is the same as the default priority before this
Reason
parameter is added in this version. The default value is set to the

largest value because the basic priority of signaling is generally
higher than services.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
category
V4.13.10.15/V3.13.10.15
ADD
2.36.3 Basic Priority for different Golden/Silver/Bronze Category

of RRC Establishment
Full Name
Basic Priority for different Golden/Silver/Bronze Category of RRC

Establishment
Abbreviated Name
bPforRrcCategory
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the basic priority corresponding to an RRC

connection establishment category.
Instance
RNC and PLMN
N/A
N/A
2-1213
SJ-20141209142030-013|2015-11-12 (R1.3)
0..15
Unit
N/A
Default Value
RrcCategory_Default
Related Parameters
RrcSetupCategory
Every value of RrcSetupCategory must have one corresponding
Parameters
value of BPforRrcCategory.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the basic priority
corresponding to an RRC establishment category.

Effect: The higher the basic priority is, the better QoS the
corresponding RRC connection establishment request has. The
lower the basic priority is, the lower priority the corresponding RRC
connection establishment request has for using radio resources.
Adjustment suggestion: A basic priority must be configured for each
RRC connection establishment category. This parameter must be
The default value is the same as the default priority before this
Reason
parameter is added in this version. The default value is set to the

largest value because the basic priority of signaling is generally
higher than services.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
category
V4.13.10.15/V3.13.10.15
ADD
2-1214
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
RRC Establishment Cause
Abbreviated Name
rrcSetupCause
Managed Object
URrcCategoryMapping
3GPP Name
Establishment cause
3GPP Reference
TS 25.331
Description
This parameter indicates the cause for initiating an RRC connection

establishment request. The establishment cause is mapped to a
category, to identify the priority of the RRC connection establishment
request.
Instance
RNC and PLMN
ZWF21-05-003
ZWF21-01-012
QOS Guarantee FG
0:Originating Conversational Call,

1:Originating Streaming Call,
2:Originating Interactive Call,
3:Originating Background Call,
4:Originating Subscribed traffic Call,
5:Terminating Conversational Call,
6:Terminating Streaming Call,
7:Terminating Interactive Call,
8:Terminating Background Call,
9:Emergency Call,
10:Inter-RAT cell re-selection,
11:Inter-RAT cell change order,
12:Registration,
13:Detach,
14:Originating High Priority Signalling,
15:Originating Low Priority Signalling,
16:Call re-establishment,
17:Terminating High Priority Signalling,
18:Terminating Low Priority Signalling,
19:Terminating cause unknown,
20:MBMS reception,
21:MBMS ptp RB request,
2-1215
SJ-20141209142030-013|2015-11-12 (R1.3)

22:Delay Tolerant Access,
23:Others
Unit
N/A
Default Value
RrcCategory_Default
Related Parameters
RrcSetupCategory
RrcSetupCauseRrcSetupCategory
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
No

RRC connection establishment request.
Reason

establishment due to the other causes belong to the third category.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read only
OMC Access path

V4.14.10.14
Add
2-1216
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Service Category Based on RRC Establishment Cause
Abbreviated Name
rrcSetupServiceCat
Managed Object
URrcCategoryMapping
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the service categories (CS Call, PS Call,

and Others) based on RRC connection establishment causes. For
different categories, whether to attempt CELL_FACH access after
admission rejection on CELL_DCH can be flexibly configured.
Instance
RNC and PLMN
ZWF21-01-012
0: CS Call
1: PS Call
2: Others
Unit
N/A
Default Value
RrcCategory_Default
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
NO
Function Switch
No
connection establishment request to a service category according to

the request cause.
Related factor: service type of the corresponding RRC establishment
request.
must be mapped to a service category. This parameter must be
2-1217
SJ-20141209142030-013|2015-11-12 (R1.3)

The default value is set based on RRC establishment causes: "0:
Reason
CS Call" for a CS service, "1: PS Call" for a PS service, and "2:

Others" for the causes other than these two categories.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path

V4.14.10.14
Modify
2.37 Roaming Ue IMSI Configuration List

(URoamingIMSI)
2.37.1 Roaming Ue IMSI Configuration List Object ID
Full Name
Roaming Ue IMSI Configuration List Object ID
Abbreviated Name
URoamingIMSIId
Managed Object
Roaming Ue IMSI Configuration List (URoamingIMSI)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the roaming UE IMSI

configuration list.
Instance
RNC
N/A
N/A
N/A
2-1218
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Roaming Ue IMSI Configuration
List
N/A
N/A
2.37.2 IMSI Digits Number for roaming uesr identification

Full Name
IMSI Digits Number for roaming uesr identification
Abbreviated Name
roamImsiDigNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1219
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the number of first IMSI digits that are
used for matching during IMSI-based CS and PS coordination in
case of network sharing.
Instance
RNC
ZWF21-30-100
RAN Sharing FG
1..15
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: the number of first digits in an IMSI that are
used for matching.

Related factors: This parameter is configured according to the
required IMSIs if the RNC supports selecting CNs by IMSI.
The default value is set according to the network deployment of
Reason
the operator.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
List
V4.13.10.15/V3.13.10.15
ADD
2-1220
SJ-20141209142030-013|2015-11-12 (R1.3)
2.37.3 IMSI High-bit Digits for roaming uesr identification

Full Name
IMSI High-bit Digits for roaming uesr identification
Abbreviated Name
roamImsiDig
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the values of matched digits during

IMSI-based CS and PS coordination in case of network sharing.
Instance
RNC
ZWF21-30-100
RAN Sharing FG
0..9
Unit
N/A
Default Value
N/A
Related Parameters
RoamImsiDigNum
The number of RoamImsiDig configured is determined by the value
Parameters
of RoamImsiDigNum
Data Type
long[15]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: values of matched digits in IMSIs.
Related factors: This parameter is configured according to the

required IMSIs if the RNC supports selecting CNs by IMSI.
Reason
the operator.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1221
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
List
V4.13.10.15/V3.13.10.15
ADD
2.37.4 Used Local ManagedElement Plmn Information

Full Name
Used Local ManagedElement Plmn Information
Abbreviated Name
refUPlmnSpecFunction
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the PLMN assigned for UEs by the RNC
during IMSI-based CS and PS coordination in case of network
sharing.
Instance
RNC
ZWF21-30-100
RAN Sharing FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1222
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the PLMN assigned
for network sharing.

Related factors: This parameter is configured according to
the roaming protocol supported by IMSIs if the RNC supports
IMSI-based CS and PS coordination.
Reason
the operator.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
List
V4.13.10.15/V3.13.10.15
ADD
2.38 UE Timers and Constants Information(UUeCnst)

2.38.1 UE Timers and Constants Information Object ID
Full Name
UE Timers and Constants Information Object ID
Abbreviated Name
UUeCnstId
Managed Object
UE Timers and Constants Information(UUeCnst)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of UE counter and timer

constants information.
Instance
RNC
N/A
N/A
2-1223
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->UE Timers and Constants
Information
N/A
N/A
2.38.2 Waiting Time After UE Sending RRC CONNECTION

REQUEST Message (T300)
Full Name
Waiting Time After UE Sending RRC CONNECTION REQUEST

Message (T300)
Abbreviated Name
t300
Managed Object
2-1224
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
T300
3GPP Reference
TS 25.331
Description
This parameter indicates the time period for a UE to wait after it

sends the RRC CONNECTION SETUP REQUEST message.
The UE starts the timer T300 after transmitting the RRC
CONNECTION SETUP REQUEST message. If the timer expires,
the UE retransmits the RRC CONNECTION SETUP REQUEST
message. If the number of retransmissions of this message is
greater than N300, the UE enters Idle mode.
Start: This UE timer is started when the RRC CONNECTION
REQUEST message is transmitted for reasons other than MBMS
reception.
Stop: This UE timer is stopped when the RRC CONNECTION
SETUP message is received.
Expiry: If the number of retransmissions of the RRC CONNECTION
REQUEST message is less than N300, the RRC CONNECTION
REQUEST message is retransmitted; otherwise, the UE enters Idle
mode.
Instance
RNC
ZWF21-01-001
OMCR: (100[0], 200[1], 400[2], 600[3], 800[4], 1000[5], 1200[6],

1400[7], 1600[8], 1800[9], 2000[10], 3000[11], 4000[12], 6000[13],
8000[14])ms, RNC: (0..14)
Unit
ms
Default Value
2000ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1225
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: time period for a UE to wait after it sends the
RRC CONNECTION SETUP REQUEST message.

Related factor: round-trip time delay between the UE and UTRAN.
A larger parameter value means a longer waiting time and a longer
delay in UE's retransmission of the RRC CONNECTION REQUEST
message. If the RRC connection fails to be established when the
RRC CONNECTION REQUEST message is transmitted for the first
time, the time delay in RRC connection setup will be long.
A smaller parameter value may cause a waste of the UL RACH
resources and DL common channel resources and interference with
the UL and DL due to UE's useless retransmission of the RRC
CONNECTION REQUEST message.
Reason
the UE and UTRAN.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A

CONNECTION REQUEST Message (N300)
Full Name

REQUEST Message (N300)
Abbreviated Name
n300
Managed Object

3GPP Name
N300
3GPP Reference
TS 25.331
2-1226
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

of the RRC CONNECTION SETUP REQUEST message.
greater than N300, the UE enters Idle mode.
Instance
RNC
ZWF21-01-001
(0..7)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
RRC CONNECTION SETUP REQUEST message.

Related factors: success rate and time delay of RRC connection
setup.
A larger parameter value helps to increase the success rate of RRC
connection setup, but may cause excessive message retransmission
on the Uu interface and longer time delay in RRC connection setup.
retransmitted on the Uu interface and decrease the time delay in
RRC connection setup, but may cause a lower success rate of RRC
connection setup.
Reason
RRC connection setup.
Change Take Effect
No
2-1227
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.4 Waiting Time for Receiving "In Sync" from L1 in Idle Mode
(T312 in Idle Mode)
Full Name
Waiting Time for Receiving "In Sync" from L1 in Idle Mode (T312 in
Idle Mode)
Abbreviated Name
t312Idle
Managed Object

3GPP Name
T312
3GPP Reference
TS 25.331
Description
This parameter indicates the UE timer in idle mode.

In Idle mode, before establishing a dedicated channel, the UE
should receive consecutive N312Idle "in sync" indications from L1
before the T312Idle expires.
Start: When the UE starts to establish a dedicated CH, the timer
is started.
Stop: When the UE detects N312 "in sync" indications from L1,
the timer is stopped.
Expiry: When the criteria for physical channel establishment failure
are fulfilled, the timer expires.
Instance
RNC
ZWF21-01-001
(1..15)s, step 1s
Unit
Default Value
2s
Related Parameters
N/A
2-1228
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: Waiting Time for Receiving "In Sync" from L1 in
Idle Mode.
Related factors: time delay and success rate of the dedicated CH
establishment, time delay and success rate of the RRC connection
setup.
If the parameter is set to a small value, this helps to shorten the
synchronization procedure, but may cause the UE to give up
checking synchronization and indicate the establishment failure,
and thus the success rate of the dedication CH establishment is
decreased.
If the parameter is set to a large value, this helps the UE try to check
synchronization, and thus the success rate is increased. But this will
prolong the synchronization procedure.
The default value is set based on the time delay and success rate of
Reason
the dedicated CH establishment.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.5 Maximum Number of "In Sync" Received from L1 in Idle

Mode (N312 in Idle Mode)
2-1229
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Maximum Number of "In Sync" Received from L1 in Idle Mode

(N312 in Idle Mode)
Abbreviated Name
n312Idle
Managed Object

3GPP Name
N312
3GPP Reference
TS 25.331
Description
This parameter indicates the maximum number of the "In Sync"

indications successively received from layer 1 in Idle mode before
the timer T312Idle expires.
Instance
RNC
ZWF21-01-001
OMCR: (1[0], 2[1], 4[2], 10[3], 20[4], 50[5], 100[6], 200[7], 400[8],
600[9], 800[10], 1000[11]); RNC: ( 0..11)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: the maximum number of the "In Sync"
indications successively received from layer 1 in Idle mode before

the timer T312Idle expires.
Related factors: time delay and accuracy of the establishment of
dedicated CHs, time delay in RRC connection setup on dedicated
CHs, the number of call re-establishments, and call-drop rate.
A smaller parameter value helps to speed up the establishment
process of dedicated CHs, but may cause lower synchronization
accuracy, the greater number of call re-establishments, and higher
call-drop rate.
A larger parameter value helps to improve the synchronization
accuracy, but may cause longer time delay in the establishment
of dedicated CHs.
2-1230
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on the time delay and accuracy of the
Reason
establishment of dedicated CHs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.6 Waiting Time After UE Sending CELL/URA UPDATE Message

(T302)
Full Name
Waiting Time After UE Sending CELL/URA UPDATE Message

(T302)
Abbreviated Name
t302
Managed Object

3GPP Name
T302
3GPP Reference
TS 25.331
Description

sends the CELL/URA UPDATE message.
The UE starts the timer T302 after transmitting the CELL
UPDATE/URA UPDATE message. If the timer expires, the UE
retransmits the CELL UPDATE/URA UPDATE message. If the
number of retransmissions of this message is greater than N302,
the UE enters Idle mode.
Start: This UE timer is started when the CELL UPDATE/URA
UPDATE message is transmitted.
Stop: This UE timer is stopped when the CELL UPDATE/URA
UPDATE message is received.
Expiry: If the number of retransmissions of the CELL UPDATE/URA
UPDATE message is less than N302, the CELL UPDATE/URA
2-1231
SJ-20141209142030-013|2015-11-12 (R1.3)
UPDATE message is retransmitted; otherwise, the UE enters Idle

mode.
Instance
RNC
ZWF21-01-001
OMCR: (100[0], 200[1], 400[2], 600[3], 800[4], 1000[5], 1200[6],

1400[7], 1600[8], 1800[9], 2000[10], 3000[11], 4000[12], 6000[13],
8000[14])ms; RNC: ( 0..14)
Unit
ms
Default Value
1000ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
CELL UPDATE/URA UPDATE message.

A smaller parameter value helps to reduce the waiting time for UE's
retransmission and to shorten the update procedure, but may cause
the greater number of retransmissions on the Uu interface.
A larger parameter value helps to reduce the number of
retransmissions, but may prolong the waiting time for UE's
retransmission and the CELL /URA update.
Reason
the UE and UTRAN.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1232
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Information
N/A
N/A
2.38.7 Maximum Number of Retransmissions of the CELL/URA

UPDATE Message (N302)
Full Name
Maximum Number of Retransmissions of the CELL/URA UPDATE

Message (N302)
Abbreviated Name
n302
Managed Object

3GPP Name
N302
3GPP Reference
TS 25.331
Description

of the CELL UPDATE/URA UPDATE message.
A UE starts the timer T302 after transmitting the CELL UPDATE/URA
UPDATE message. If the timer expires, the UE retransmits the CELL
UPDATE/URA UPDATE message. If the number of retransmissions
of this message is greater than N302, the UE enters Idle mode.
Instance
RNC
ZWF21-01-001
(0..7)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-1233
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
CELL UPDATE/URA UPDATE message.

Related factors: success rate and time delay of CELL/URA update.
A larger parameter value helps to increase the success rate of
CELL/URA update to prevent a UE from entering IDLE mode due to
an update failure, but may cause excessive message retransmission
on the Uu interface and longer time delay in CELL/URA update.
retransmitted on the Uu interface and decrease the time delay
in CELL/URA update, but may result in a lower success rate of
CELL/URA update and cause a UE to enter IDLE mode due to an
update failure.
Reason
CELL/URA update.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.8 Waiting Time After UE Sending UE CAPABILITY

INFORMATION Message (T304)
Full Name
Waiting Time After UE Sending UE CAPABILITY INFORMATION

Message (T304)
Abbreviated Name
t304
Managed Object

3GPP Name
T304
2-1234
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

sends the UE CAPABILITY INFORMATION message.
The UE starts the timer T304 after transmitting the UE CAPABILITY
INFORMATION message. If the timer expires, the UE retransmits
the UE CAPABILITY INFORMATION message. If the number of
retransmissions of this message is greater than N304, the UE
initiates a CELL UPDATE procedure due to a radio link failure.
Start: This UE timer is started when the UE CAPABILITY
INFORMATION message is transmitted.
Stop: This UE timer is stopped when the UE CAPABILITY
INFORMATION CONFIRM message is received.
Expiry: If the number of retransmissions of the UE CAPABILITY
INFORMATION message is less than N304, the UE CAPABILITY
INFORMATION message is retransmitted; otherwise, the UE
initiates a cell update procedure.
Instance
RNC
ZWF21-01-001
OMCR: (100[0], 200[1], 400[2], 1000[3], 2000[4])ms; RNC: ( 0..4)
Unit
ms
Default Value
2000ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
UE CAPABILITY INFORMATION message.

A smaller parameter value helps to reduce the waiting time for UE's
retransmission and to shorten the enquiry procedure, but may cause
the greater number of retransmissions.
A larger parameter value helps to reduce the number of
retransmissions on the Uu interface, but may prolong the waiting
time for UE's retransmission and the enquiry.
2-1235
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
the UE and UTRAN.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.9 Maximum Number of Retransmissions of the UE CAPABILITY

INFORMATION Message (N304)
Full Name
Maximum Number of Retransmissions of the UE CAPABILITY

INFORMATION Message (N304)
Abbreviated Name
n304
Managed Object

3GPP Name
N304
3GPP Reference
TS 25.331
Description

of the UE CAPABILITY INFORMATION message.
A UE starts the timer T304 after transmitting the UE CAPABILITY
INFORMATION message. If the timer expires, the UE retransmits
the UE CAPABILITY INFORMATION message. If the number of
retransmissions of this message is greater than N304, the UE
initiates a CELL UPDATE procedure due to a radio link failure.
Instance
RNC
ZWF21-01-001
2-1236
SJ-20141209142030-013|2015-11-12 (R1.3)
(0..7)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
UE CAPABILITY INFORMATION message.

Related factors: success rate and time delay of UE capability
enquiry.
A larger parameter value helps to increase the success rate
of UE capability enquiry, but may cause excessive message
retransmission on the Uu interface and longer time delay in UE
capability enquiry.
retransmitted on the Uu interface and decrease the time delay in
UE capability enquiry, but may cause a lower success rate of UE
capability enquiry.
The default value is set based on the success rate and time delay
Reason
of UE capability enquiry.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2-1237
SJ-20141209142030-013|2015-11-12 (R1.3)
2.38.10 Period of Cell/URA Update When UE is in

CELL_FACH/CELL_PCH/URA_PCH State (T305)
Full Name
Period of Cell/URA Update When UE is in

CELL_FACH/CELL_PCH/URA_PCH State (T305)
Abbreviated Name
t305
Managed Object

3GPP Name
T305
3GPP Reference
TS 25.331
Description
This parameter indicates the time period for Cell/URA update when
a UE is in CELL_FACH/CELL_PCH/URA_PCH state.
If the timer T305 expires and the UE detects the "out of service
area" indication, the UE starts the timer T307.
Start: This UE timer is started when the UE enters CELL_FACH,
URA_PCH, or CELL_PCH state, or when the CELL UPDATE
CONFIRM/URA UPDATE CONFIRM message is received.
Stop: This UE timer is stopped when the UE enters CELL_DCH or
Idle state.
Expiry: If the timer T307 is not activated and the UE detects the
"in service area" indication, the UE transmits the CELL UPDATE
message. Otherwise, if the timer T307 is not activated, the UE
starts it.
Instance
RNC
ZWF21-01-001
OMCR: ( No update[0], 5[1], 10[2], 30[3], 60[4], 120[5], 360[6],

720[7])minutes, RNC: (0..7), step 1
Unit
min
Default Value
5min
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-1238
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: time period for Cell/URA update when a UE is
in CELL_FACH/CELL_PCH/URA_PCH state.
Related factor: time delay in detection of losing connection between
the UE and UTRAN.
A larger parameter value helps to reduce the signalling load on
the Uu interface, but may postpone the detection of UE's losing
connection with the RNC.
A smaller parameter value helps to detect the UE's losing connection
with the RNC, but may increase the signalling load on the Uu
interface.
The default value is set based on general tolerant time delay in
Reason
detection of losing connection between a UE and UTRAN.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.11 Waiting Time for Cell Reselection After UE is out of Service

(T307)
Full Name
Waiting Time for Cell Reselection After UE is out of Service (T307)
Abbreviated Name
t307
Managed Object

3GPP Name
T307
3GPP Reference
TS 25.331
2-1239
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the time period for a UE to attempt to

re-enter a service area after it is out of service.
If the timer T305 expires and the UE detects the "out of service
area" indication, the UE starts the timer T307. During the running of
the timer T307, if the UE detects the "in service area" indication, it
stops this timer. If the timer T307 expires, the UE enters Idle mode.
Start: This UE timer is started when the timer T305 expires and the
UE detects the "out of service area" indication.
Stop: This UE timer is stopped when the UE detects the "in service
area" indication.
Expiry: If this timer expires, the UE enters Idle mode.
Instance
RNC
ZWF21-01-001
OMCR: (5[0], 10[1], 15[2], 20[3], 30[4], 40[5], 50[6])s , RNC: ( 0..6)
Unit
Default Value
30s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: time period for a UE to attempt to re-enter a
service area after it is out of service.

Related factor: time delay for the UE to attempt to re-enter the
service area.
A smaller parameter value helps to shorten the time delay when the
UE attempts to re-enter the service area, but may cause the UE to
enter IDLE mode early due to a reselection failure.
A larger parameter value helps to prevent the UE from entering
IDLE mode early, but may cause longer time delay when the UE
attempts to re-enter the service area.
The default value is set based on the time delay for a UE to attempt
Reason
to re-enter a service area.
Change Take Effect
No
2-1240
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.12 Waiting Time After Sending RRC CONNECTION RELEASE

COMPLETE Message in CELL_DCH State (T308)
Full Name
Waiting Time After Sending RRC CONNECTION RELEASE

COMPLETE Message in CELL_DCH State (T308)
Abbreviated Name
t308
Managed Object

3GPP Name
T308
3GPP Reference
TS 25.331
Description

sends the RRC CONNECTION RELEASE COMPLETE message in
CELL_DCH state.
CONNECTION RELEASE COMPLETE message. If the timer
expires, the UE retransmits the RRC CONNECTION RELEASE
COMPLETE message. If the number of retransmissions of this
message is greater than N308, the UE enters Idle mode.
RELEASE COMPLETE message is transmitted.
Stop: This UE timer is not stopped.
RELEASE COMPLETE message is less than N308, the RRC
CONNECTION RELEASE COMPLETE message is retransmitted;
otherwise, the UE enters Idle mode.
Instance
RNC
ZWF21-01-001
2-1241
SJ-20141209142030-013|2015-11-12 (R1.3)
OMCR: (40[0], 80[1], 160[2], 320[3])ms, RNC: (0..3)
Unit
ms
Default Value
40ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: time period for a UE to wait after it sends
the RRC CONNECTION RELEASE COMPLETE message in

CELL_DCH state.
Related factor: time delay in RRC connection release.
A smaller parameter value helps to shorten the time delay in RRC
connection release to allow the UE to transfer to IDLE mode from
CELL_DCH soon.
A larger parameter value causes a longer time delay in RRC
connection release and postpones the UE's transfer to IDLE mode
from CELL_DCH.
The default value is set based on the time delay in RRC connection
Reason
release.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2-1242
SJ-20141209142030-013|2015-11-12 (R1.3)
2.38.13 Waiting Time After Requesting Connection Establishment

in Other System (eg. GSM) (T309)
Full Name
Waiting Time After Requesting Connection Establishment in Other

System (eg. GSM) (T309)
Abbreviated Name
t309
Managed Object

3GPP Name
T309
3GPP Reference
TS 25.331
Description

sends the request for connection establishment in other systems
(for example, GSM).
Start: This UE timer is started when the CELL CHANGE ORDER
FROM UTRAN message is received.
Stop: This UE timer is stopped when the UE receives a successful
response to the connection establishment request from other
systems.
Expiry: The UE resumes the connection to UTRAN.
Instance
RNC
ZWF21-01-001
(1..8)s , step 1s
Unit
Default Value
8s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1243
SJ-20141209142030-013|2015-11-12 (R1.3)
request for connection establishment in other systems (for example,

GSM).
Related factors: success rate and time delay of PS inter-RAT
handover from 3G to 2G.
A larger parameter value helps the UE access 2G networks, but
may cause a longer time delay and lower service quality.
A smaller parameter value helps to reduce the time delay in
handover and improve the service quality, but may cause a lower
success rate of handover.
The default value is set based on the success rate of PS inter-RAT
Reason
handover from 3G to 2G.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.14 Waiting Time for Receiving "In Sync" from L1 in Connected

Mode (T312 in Connected Mode)
Full Name
Waiting Time for Receiving "In Sync" from L1 in Connected Mode

(T312 in Connected Mode)
Abbreviated Name
t312Connected
Managed Object

3GPP Name
T312
3GPP Reference
TS 25.331
2-1244
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the waiting time for a UE to receive "In

Sync" indications from layer 1 in connected mode.
In Connected mode, before establishing dedicated CHs, the UE
should consecutively receive N312Connected "In Sync" indications
from layer 1 before the timer T312Connected expires.
Start: This UE timer is started when the UE starts to establish
dedicated CHs.
Stop: This UE timer is stopped when the UE detects N312 "In Sync"
indications from layer 1.
Expiry: The criteria for physical channel establishment failure are
fulfilled.
Instance
RNC
ZWF21-01-001
(1..15)s , step 1s
Unit
Default Value
1s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: waiting time for a UE to receive "In Sync"
indications from layer 1 in connected mode.

Related factors: time delay and success rate of establishment of
dedicated CHs, time delay and success rate of transfer to dedicated
CHs.
A smaller parameter value helps to shorten the synchronization
procedure, but may cause the UE to abandon synchronization
detection early and to indicate an establishment failure, and thus the
success rate of establishment of dedicated CHs is decreased.
A larger parameter value helps the UE to attempt synchronization
detection and to increase the success rate of the establishment of
dedicated CHs, but may prolong the synchronization.
The default value is set based on the time delay and success rate of
Reason
the establishment of dedicated CHs.
2-1245
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.15 Maximum Number of "In Sync" Received from L1 in

Connected Mode (N312 in Connected Mode)
Full Name
Maximum Number of "In Sync" Received from L1 in Connected

Mode (N312 in Connected Mode)
Abbreviated Name
n312Connected
Managed Object

3GPP Name
N312
3GPP Reference
TS 25.331
Description

indications successively received from layer 1 in Connected mode
before the timer T312Connected expires.
Instance
RNC
ZWF21-01-001
OMCR: (1[0], 2[1], 4[2], 10[3], 20[4], 50[5], 100[6], 200[7], 400[8],
600[9], 800[10], 1000[11]); RNC: (0..11)
Unit
N/A
Default Value
Related Parameters
N/A
2-1246
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
indications successively received from layer 1 in Connected mode

before the timer T312Connected expires.
Related factors: time delay and accuracy of the establishment of
dedicated CHs, time delay in status transfer to dedicated CHs, the
number of call re-establishments, and call-drop rate.
A smaller parameter value helps to speed up the establishment
process of dedicated CHs, but may cause lower synchronization
accuracy, the greater number of call re-establishments, and higher
call-drop rate.
accuracy, but may cause longer time delay in the establishment
of dedicated CHs.
The default value is set based on the time delay and accuracy of the
Reason
establishment of dedicated CHs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.16 Waiting Time After DPCCH Established in CELL_DCH State

Losing Synchronization (T313)
2-1247
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Waiting Time After DPCCH Established in CELL_DCH State Losing

Synchronization (T313)
Abbreviated Name
t313
Managed Object

3GPP Name
T313
3GPP Reference
TS 25.331
Description
This parameter indicates the UE timer.

In CELL_DCH state, after receiving N313 consecutive "out of sync"
indications from L1, the UE should start T313. During the running
of T313, upon receiving N315 successive "in sync" indications from
L1, the UE should stop and reset timer T313. If timer T313 expires,
the UE should consider it as a "Radio link failure".
Start: When the UE detects consecutive N313 "out of sync"
indications from L1, the timer is started.
Stop: When the UE detects consecutive N315 "in sync" indications
from L1, the timer is stopped.
Expiry: When the criteria for Radio Link failure are fulfilled, the
timer expires.
Instance
RNC
ZWF21-01-001
(0..15)s , step 1s
Unit
Default Value
3s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1248
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: Waiting Time After DPCCH Established in
CELL_DCH State Losing Synchronization.

Related factors: time delay and veracity of the RL failure indication.
If the parameter is set to a small value, this helps to quicken the UE
reporting RL failure, and trigger call-reestablishment to guarantee
the service quality, but may cause redundant call-reestablishment
due to radio quality fluctuation.
If the parameter is set to a large value, this helps to increase the
accuracy and avoid redundant call-reestablishment, but postpones
the UE reporting RL failure and subsequent call-reestablishment.
As a result, the service quality may not be guaranteed.
The default value is set based on the time delay and accuracy of
Reason
the RL failure indication.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.17 Maximum Number of Successive "Out of Sync" Received

from L1 (N313)
Full Name
Maximum Number of Successive "Out of Sync" Received from L1

(N313)
Abbreviated Name
n313
Managed Object

3GPP Name
N313
3GPP Reference
TS 25.331
2-1249
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum number of the "Out of Sync"

indications successively received by a UE from layer 1.
In CELL_DCH state, the UE starts the timer T313 if it consecutively
receives N313 "Out of Sync" indications from layer 1. During
the running of T313, the UE stops and resets the timer T313 if it
successively receives N315 "In Sync" indications from layer 1. If the
timer T313 expires, the UE considers it as a "Radio link failure".
Instance
RNC
ZWF21-01-001
OMCR: (1[0], 2[1], 4[2], 10[3], 20[4], 50[5], 100[6], 200[7]); RNC:
(0..7)
Unit
N/A
Default Value
50
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: the maximum number of the "Out of Sync"
indications successively received by a UE from layer 1.

Related factors: time delay and accuracy of the RL failure
indications, the number of call re-establishments, and call-drop rate.
A smaller parameter value helps to speed up the process of RL
failure reporting and to trigger call re-establishment for better service
quality, but may cause the greater number of call re-establishments
and higher call-drop rate due to radio quality fluctuation.
A larger parameter value helps to improve the accuracy, but may
cause the time delay in reporting of RL failure indications and in call
re-establishment, and thus lower service quality.
The default value is set based on the time delay and accuracy of RL
Reason
failure indications.
Change Take Effect
No
2-1250
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.18 Waiting Time for Completion of Cell Update When Radio

Link Fails and Radio Bearer (s) Associated with T314 Exist
(T314)
Full Name
Waiting Time for Completion of Cell Update When Radio Link Fails
and Radio Bearer (s) Associated with T314 Exist (T314)
Abbreviated Name
t314
Managed Object

3GPP Name
T314
3GPP Reference
TS 25.331
Description

Start: When the criteria for radio link failure are fulfilled, the timer
is started if radio bearers that are associated with T314 exist, or if
RRC connection exists only in the CS domain.
Stop: When the Cell Update procedure has been completed, the
timer is stopped.
Expiry: If timer T302 is running, the UE should continue awaiting
CELL UPDATE CONFIRM or URA UPDATE CONFIRM message
from UTRAN.
If timer T302 is not running and timer T315 is running, the UE should
release radio bearers that are associated with T314.
If timers T302 and T315 are not running, UE should release all its
radio resources and enter Idle mode.
Instance
RNC
ZWF21-01-001
2-1251
SJ-20141209142030-013|2015-11-12 (R1.3)
OMCR: (0[0], 2[1], 4[2], 6[3], 8[4], 12[5], 16[6], 20[7])s

RNC: (0..7)
Unit
Default Value
4s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: Waiting Time for Completion of Cell Update
When Radio Link Fails and Radio Bearer(s) Associated with T314
Exist.
Related factors: whether the service is applicable to
call-reestablishment or not, success rate of call-reestablishment,
call-drop rate, and time delay of the CS RB release.
If the parameter is set to a large value, this helps to postpone the UE
releasing the CS RB, increase the success rate of cell update and
call-reestablishment, and decrease call-drop rate, but may prolong
the release in the case of call-reestablishment failure.
If the parameter is set to a small value, this helps to quicken the
release of the CS RB, but may cause the UE to release the CS RB
prematurely and decrease the success rate of call-reestablishment.
The default value is set based on whether the service is applicable to
Reason
call-reestablishment or not, the success rate of call-reestablishment,

and time delay of the CS RB release.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
2-1252
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.38.19 Waiting Time for Completion of Cell Update When Radio

Link Fails and Radio Bearer (s) Associated with T315 Exist
(T315)
Full Name
Waiting Time for Completion of Cell Update When Radio Link Fails
and Radio Bearer (s) Associated with T315 Exist (T315)
Abbreviated Name
t315
Managed Object

3GPP Name
T315
3GPP Reference
TS 25.331
Description

Start: When the criteria for radio link failure are fulfilled, the timer
is started if radio bearers that are associated with T314 exist, or if
RRC connection exists only in the PS domain.
Stop: When the Cell Update procedure has been completed, the
timer is stopped.
Expiry: If timer T302 is running, the UE should continue awaiting
CELL UPDATE CONFIRM or URA UPDATE CONFIRM message
from UTRAN. If timer T302 is not running and timer T314 is running,
the UE should release radio bearers that are associated with T315.
If timers T302 and T314 are not running, UE should release all its
radio resources and enter Idle mode.
Instance
RNC
ZWF21-01-001
OMCR: (0[0], 10[1], 30[2], 60[3], 180[4], 600[5], 1200[6], 1800[7])s

RNC: (0..7)
Unit
Default Value
30s
Related Parameters
N/A
N/A
Parameters
2-1253
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: Waiting Time for Completion of Cell Update
When Radio Link Fails and Radio Bearer (s) Associated with T315
Exist.
Related factors: whether the service is applicable to
call-reestablishment or not, success rate of call-reestablishment,
call-drop rate, and time delay of the PS RB release.
If the parameter is set to a large value, this helps to postpone the UE
releasing the PS RB, increase the success rate of cell update and
call-reestablishment, and decrease call-drop rate, but may prolong
the release in the case of call-reestablishment failure.
If the parameter is set to a small value, this helps to quicken the
release of the PS RB, but may cause the UE to release the PS RB
prematurely and decrease the success rate of call-reestablishment.
The default value is set based on whether the service is applicable to
Reason
call-reestablishment or not, the success rate of call-reestablishment,

and time delay of the PS RB release.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.20 Maximum Number of Successive "In Sync" Received from

L1 During T313 is Activated (N315)
Full Name
Maximum Number of Successive "In Sync" Received from L1 During

T313 is Activated (N315)
2-1254
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
n315
Managed Object

3GPP Name
N315
3GPP Reference
TS 25.331
Description

indications successively received by a UE from layer 1 during the
time period when the timer T313 is activated.
In CELL_DCH state, the UE starts the timer T313 if it consecutively
receives N313 "Out of Sync" indications from layer 1. During
the running of T313, the UE stops and resets the timer T313 if it
successively receives N315 "In Sync" indications from layer 1. If the
timer T313 expires, the UE considers it as a "Radio link failure".
Instance
RNC
ZWF21-01-001
OMCR: (1[0], 2[1], 4[2], 10[3], 20[4], 50[5], 100[6], 200[7], 400[8],
600[9], 800[10], 1000[11]); RNC: (0..11)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
indications successively received by a UE from layer 1 during the

time period when the timer T313 is activated.
Related factors: synchronization time delay and accuracy of
dedicated CHs, the number of call re-establishments, and call-drop
rate.
A smaller parameter value helps to speed up the synchronization
process, but may cause lower synchronization accuracy, the greater
number of RL FAIL IND indications and call re-establishments, and
higher call-drop rate.
2-1255
SJ-20141209142030-013|2015-11-12 (R1.3)

accuracy, but may cause longer time delay in synchronization.
The default value is set based on the synchronization time delay
Reason
and accuracy of dedicated CHs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.21 Waiting Time for Cell Selection/Reselection After UE is out

of Service in CELL_PCH/URA_PCH State (T316)
Full Name
Waiting Time for Cell Selection/Reselection After UE is out of

Service in CELL_PCH/URA_PCH State (T316)
Abbreviated Name
t316
Managed Object

3GPP Name
T316
3GPP Reference
TS 25.331
Description

Start: When the UE detects "out of service area" in URA_PCH or
CELL_PCH state, the timer is started.
Stop: When the UE detects "in service area", the timer is stopped.
Expiry: The UE initiates the cell update procedure if "in service
area" is detected. Otherwise the UE starts timer T317, and transits
to CELL_FACH state. The UE initiates the cell update procedure
when it detects "in service area".
Instance
RNC
ZWF21-01-001
2-1256
SJ-20141209142030-013|2015-11-12 (R1.3)
OMCR: (0[0], 10[1], 20[2], 30[3], 40[4], 50[5], Infinity[6] )s

RNC: (0..6)
Unit
Default Value
0s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: Waiting Time for Cell Selection/Reselection
After UE is out of Service in CELL_PCH/URA_PCH State.

Related factors: time delay of cell reselection in PCH status.
If the parameter is set to a large value, this helps the UE perform
cell reselection while keeping in PCH status.
If the parameter is set to a small value, this helps to shorten the time
during which the UE keeps in PCH status, and let the UE transfer to
FACH status as soon as possible when the UE is out of service.
If the parameter is set to 0, the UE can transfer to CELL_FACH
status immediately after it is out of service area in PCH status. The
reason for triggering cell reselection in FACH status is "re-entering
service area".
The default value is set based on the consideration that the UE can
Reason
enter FACH status as soon as possible to trigger cell reselection

in this status.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
2-1257
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.38.22 Switch of T323 Broadcasting

Full Name
Switch of T323 Broadcasting
Abbreviated Name
t323Swch
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.331
Description
This parameter indicates whether the Fast Dormancy is enabled.

On: RNC sends T323 to UE by using SIB1 and UTRAN mobility
information.
Off: RNC does not send T323 to UE.
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1258
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates whether the Fast Dormancy function
is enabled.
Configuration rule:
If the switch is on, the UE supporting the Fast Dormancy function
can enter an efficient power consumption state when there is no PS
data as quickly as possible. However, this may cause ping-pong
adjustment.
If the switch is off, the UE cannot enter an efficient power
consumption state as quickly as possible when there is no PS data.
However, this can avoid ping-pong adjustment and provide better
user experience.
The default value is set to off to provide a better user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.38.23 Waiting Time of UE Sending message SIGNALING

CONNECTION RELEASE INDICATION (with Cause)(T323)
Full Name
Waiting Time of UE Sending message SIGNALING CONNECTION

RELEASE INDICATION (with Cause)(T323)
Abbreviated Name
t323
Managed Object

3GPP Name
T323
3GPP Reference
TS 25.331
2-1259
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the interval of reporting signaling

connection release indication (with cause). As UE in connection
mode with only PS domain, but not PS data transmission within a
certain time, if T323 is not enabled, UE sends signaling connection
release indication (with cause) to switch states to start T323. If
there is no data transmission before T323 timeout and UE is still
in connection mode, then resend signaling connection release
indication (with cause).
Instance
RNC
ZWF21-01-027
Fast Dormancy
Fast Dormancy FG
0, 5, 10, 20, 30, 60, 90, 120 s
Unit
Default Value
10s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the length of time that the UE waits before
sending the Signaling Connection Release Indication message with

the cause value.
Related factor: loopback delay between the UE and the UTRAN.
If this parameter is set to a large value, the UE has to wait for a long
time before resending the Signaling Connection Release Indication
message. In this case, the time that the UE enters an efficient power
consumption state when there is no PS data will also be delayed.
If this parameter is set to a smaller value, the UE may frequently
resend the Signaling Connection Release Indication message,
which causes a waste of resources.
The default value is set based on the round trip time between UE
Reason
and UTRAN.
Change Take Effect
No
2-1260
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A

CONNECTION REQUEST Message for High Cell Load
Full Name

REQUEST Message for High Cell Load
Abbreviated Name
n300HighLoad
Managed Object

3GPP Name
N300
3GPP Reference
TS 25.331
Description

of an RRC CONNECTION SETUP REQUEST message when the
cell load is high.
greater than N300, the UE transitions to the Idle state.
Instance
RNC
ZWF21-04-039
(0..7)
Unit
NA
Default Value
Related Parameters
N/A
2-1261
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the maximum number of
retransmissions of the RRC CONNECTION SETUP REQUEST

message when the cell is in high load state.
Related factor: success rate of RRC connection setup, system
capacity.
If the parameter value is large, it helps increase the RRC connection
setup success rate, but it may cause excessive message
retransmissions on the Uu interface, which then increases the cell
load and reduces the system capacity.
If the parameter value is small, it helps reduce the number of
messages retransmitted on the Uu interface, which then reduces
the cell load and increases the system capacity, but it may lower the
RRC connection setup success rate.
The default value is set based on the success rate of RRC
Reason
connection setup and system capacity.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Information
Add
2.38.25 Waiting Time After UE Sending RRC CONNECTION

REQUEST Message for High Cell Load
2-1262
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Waiting Time After UE Sending RRC CONNECTION REQUEST

Message for High Cell Load
Abbreviated Name
t300HighLoad
Managed Object

3GPP Name
T300
3GPP Reference
TS 25.331
Description

sends an RRC CONNECTION SETUP REQUEST message when
the cell load is high.
greater than N300, the UE transitions to Idle state.
REQUEST message is transmitted for reasons other than MBMS
reception.
Stop: This UE timer is stopped when the RRC CONNECTION
SETUP message is received.
REQUEST message is less than or equal to N300, the RRC
CONNECTION REQUEST message is retransmitted; otherwise, the
UE transitions to the Idle state.
Instance
RNC
ZWF21-04-039
OMCR: (100[0], 200[1], 400[2], 600[3], 800[4], 1000[5], 1200[6],

1400[7], 1600[8], 1800[9], 2000[10], 3000[11], 4000[12], 6000[13],
8000[14])ms, RNC: (0..14)
Unit
ms
Default Value
3000ms
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
2-1263
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the time period for a UE
to wait after it sends an RRC CONNECTION SETUP REQUEST

message when the cell is in high load state.
system capacity.
If the parameter value is large, it indicates a longer waiting time and
a longer delay before the UE retransmits the RRC CONNECTION
REQUEST messageand it may increase the system capacity.
If the RRC connection fails to be established when the RRC
CONNECTION REQUEST message is transmitted for the first time,
the time delay in RRC connection setup will be prolonged.
If the parameter value is small, it may cause useless retransmissions
of RRC CONNECTION REQUEST messages, which results in a
waste of uplink RACH resources and downlink common channel
resources, and causes uplink/downlink interference to increase.
Reason
the UE and UTRAN, and the system capacity.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Information
Add
2.39 CN NAS System Information(UCnInfo)

2.39.1 CN NAS System Information Object ID
Full Name
CN NAS System Information Object ID
Abbreviated Name
UCnInfoId
2-1264
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
CN NAS System Information(UCnInfo)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the CN NAS information.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->CN NAS System Information
N/A
N/A
2-1265
SJ-20141209142030-013|2015-11-12 (R1.3)
2.39.2 CN Domain Supported

Full Name
CN Domain Supported
Abbreviated Name
cnDomain
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CN domain supported by PLMN.
Instance
RNC and PLMN
ZWF21-01-001
0: CS Domain
1: PS Domain
2: CS +PS Domain
Unit
N/A
Default Value
2: CS +PS Domain
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter indicates the CN domain
supported by PLMN.
Related factors: CN domain configuration based on PLMN.
The default value is CS+PS domain. This parameter should be
Reason
configured based on the actual PLMN capability.
Change Take Effect
Yes
2-1266
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
1, the connection in Iu interface may be invalid; 2, the CN DOMAIN

in SIB1 may change, and affect whether the UE can access the
UTRAN.
Access
Read/Write
OMC Access path
N/A
N/A
2.39.3 IMSI Attach and Detach Indicator

Full Name
IMSI Attach and Detach Indicator
Abbreviated Name
attIndCs
Managed Object

3GPP Name
ATT
3GPP Reference
TS 24.008
Description
This parameter indicates whether to use IMSI attach and detach

procedure. TRUE: When the UE is switched off or the SIM card is
unplugged, it sends an IMSI detach message to the network side.
When the UE is switched on, if the UE is still in the registration
district where it is deactivated, the UE shall apply IMSI attach to the
location register. Otherwise, the UE does reguler location register.
Instance
RNC and PLMN
ZWF21-01-001
0: Not Apply IMSI Attach and Detach Procedure

1: Apply IMSI Attach and Detach Procedure
Unit
N/A
Default Value
1: Apply IMSI Attach and Detach Procedure
Related Parameters
N/A
N/A
Parameters
2-1267
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter indicates whether to use IMSI
attach and detach procedure. This parameter indicates whether to

use IMSI attach and detach procedure. TRUE: When the UE is
switched off or the SIM card is unplugged, it sends an IMSI detach
message to the network side. When the UE is switched on, if the
UE is still in the registration district where it is deactivated, the UE
shall apply IMSI attach to the location register. Otherwise, the UE
does reguler location register.
Related factors: UE power consumption, and system resource
consumption due to redundant paging.
Configuration rule: If this parameter is configured to 1, the CN will
not send unnecessary paging attempts to UEs. If this parameter
is configured to 0, the CN may send redundant paging attempts
to UEs.
The default value is 1, which is set to avoid the CN sends
Reason
unnecessary paging attempts to UEs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.39.4 Network Mode of Operation

Full Name
Network Mode of Operation
Abbreviated Name
nmoPs
Managed Object
2-1268
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
NMO
3GPP Reference
TS 24.008
Description
This parameter indicates the whether the Gs interface (between the

MSC server and the SGSN) is available.
Network operation mode 1 indicates that the Gs interface is
available, while Network Operation Mode 2 indicates that the Gs
interface is not available.
When the Gs interface is available, the CN can support the LA/RA
combined update, which means, when the UE with a CS connection
trigger attaching to the SGSN, the SGSN
will trigger the location update procedure of CS domain.
Instance
RNC and PLMN
ZWF21-01-001
0: Network Mode of Operation I

1: Network Mode of Operation II
Unit
N/A
Default Value
1: Network Mode of Operation II
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the whether
the Gs interface (between the MSC server and the SGSN) is

available.Network operation mode 1 indicates that the Gs interface
is available, while Network Operation Mode 2 indicates that the Gs
interface is not available.
Related factors: network deployment of operators
Configuration rule: if the Gs interface is configured, the CN supports
the LA/RA combined update of the CS and PS domain.
Adjustment suggestion: at present, most of manufactures did not put
the Gs interface into commercial application. It is not recommended
to configure the Gs interface.
2-1269
SJ-20141209142030-013|2015-11-12 (R1.3)
When the Gs interface is available, the CN can support the LA/RA

combined update, which means, when the UE with a CS connection
trigger attaching to the SGSN, the SGSN
will trigger the location update procedure of CS domain.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.39.5 Timer for Periodic Location Update (T3212)

Full Name
Timer for Periodic Location Update (T3212)
Abbreviated Name
t3212Cs
Managed Object

3GPP Name
T3212
3GPP Reference
TS 24.008
Description
This parameter indicates the value of the timer that controls the
periodic location update. The location update occurs in the system
due to two reasons: 1. UE finds the location area has changed
(different LAC). 2. the network specifies that the MS should update
the location periodically. The T3212 controls the time duration for
updating the location periodically.
Instance
RNC and PLMN
ZWF21-01-001
2-1270
SJ-20141209142030-013|2015-11-12 (R1.3)
OMCR: ( 0, 0.1..25.5)hours, step 0.1hour

RNC: D=P*10
(0..255)
Unit
hours
Default Value
1hour
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
Yes
Function Switch
No
that controls the periodic location update.

Related factors: UE location information that can be obtained by
the network in time, the timer whose duration is less than the CN
location update period, and the system resource consumption.
Configuration rule: if this parameter value is too high, the CN paging
will fail, decreasing the network KPI. If this parameter value is too
small, the periodic location update will be performed frequently,
increasing the system resource consumption.
Adjustment suggestion: this parameter is an interconnection
parameter, which must be configured by negotiating with CN. It
should be less than the time duration of the CN location update
period.
The default value of this parameter is set based on the following
Reason
factors: whether the network can obtain the UE location information

in time, the timer whose duration is less than the CN location update
period, and the system resource consumption.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1271
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.39.6 CS Domain DRX Cycle Length Coefficient

Full Name
CS Domain DRX Cycle Length Coefficient
Abbreviated Name
kcs
Managed Object

3GPP Name
CN domain specific DRX cycle length coefficient
3GPP Reference
TS 25.331
Description
This parameter indicates the CS domain DRX cycle length

coefficient.
This parameter is used for the difficult reception of UE in the idle
mode and Cell_PCH / URA_PCH mode. This parameter is used
to calculate the paging occasion, that is, a constant required in
monitoring the PICH cycle. The difficult reception cycle is 2^k
frames.
In the idle mode, if UE has attached in CS domain and PS domain,
then k is the minimum value in CS domain DRX cycle length
coefficient, PS domain DRX cycle length coefficient. If UE has
attached only in one domain (CS domain or PS domain), then k is
attached domain DRX cycle length coefficient.
In the connection mode, k is the minimum value in CS domain DRX
cycle length coefficient, PS domain DRX cycle length coefficient,
and UTRAN DRX cycle length coefficient.
Instance
RNC and PLMN
ZWF21-01-003
Paging
6..9
Unit
N/A
Default Value
Related Parameters
Kcs of R8CnInfo, Kps of R8CnInfo, MbmsModPrdCoeff of R8CnInfo
2-1272
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
Parameter function: This parameter indicates the CS domain DRX
cycle length coefficient, used for listening to PICHs periods in idle

mode and CELL_PCH/URA_PCH mode.
Related factors: UE power consumption in CS domain, speed of UE
paging responding, and interference to the system.
Configuration rule: the greater the parameter value is, the more
slowly UE paging responds in CS domain, increasing the time delay
for call establishment and affecting user experiences. Also, the
downlink interference may occur due to redundant paging in CN.
However, the UE power consumption will be lower.
The lower the parameter values is, the faster UE paging responds in
CS domain, decreasing the time delay for call establishment. But
the UE will frequently detect the PICH, increasing the UE power
consumption.
The default value is a mean value selected based on the UE power
Reason
consumption in CS domain and the paging response speed.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.39.7 PS Domain DRX Cycle Length Coefficient

Full Name
PS Domain DRX Cycle Length Coefficient
Abbreviated Name
kps
2-1273
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
CN domain specific DRX cycle length coefficient
3GPP Reference
TS 25.331
Description
This parameter indicates the PS domain DRX cycle length coefficient,

used for UE DRX in both idle mode and Cell_PCH/URA_PCH mode.
This parameter is used for calculating the paging occasion (meaning
a constant required in the cycle for listening to PICHs). The DRX
cycle is 2^k frames.
In the idle mode, if UE has attached in CS domain and PS domain,
then k is the minimum value of the CN domain specific DRX cycle
length coefficient between CS domain and PS domain.
If UE has attached only in one domain (CS domain or PS domain),
then k is DRX cycle length coefficient in the attached domain.
In connected mode, the UE selects the minimum of "UTRAN DRX
cycle length coefficient" and "CN domain specific DRX cycle length
coefficient" of the domain where the attach operation has been
performed.
Instance
RNC and PLMN
ZWF21-01-003
Paging
6..9
Unit
N/A
Default Value
Related Parameters
Kcs of R8CnInfo, Kps of R8CnInfo, MbmsModPrdCoeff of R8CnInfo
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
2-1274
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the PS domain DRX
cycle length coefficient, used for listening to PICHs periods in idle

mode and CELL_PCH/URA_PCH mode.
Related factors: UE power consumption in PS domain, speed of UE
paging responding, and interference to the system.
Configuration rule: the greater the parameter value is, the more
slowly UE paging responds in PS domain, increasing the time delay
for call establishment and affecting user experiences. Also, the
downlink interference may occur due to redundant paging in CN.
However, the UE power consumption will be lower.
The lower the parameter values is, the faster UE paging responds in
PS domain, decreasing the time delay for call establishment. But
the UE will frequently detect the PICH, increasing the UE power
consumption.
The default value is a mean value selected based on the UE power
Reason
consumption in CS domain and the paging response speed.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.39.8 Modification Period Coefficient for MBMS

Full Name
Modification Period Coefficient for MBMS
Abbreviated Name
mbmsModPrdCoeff
Managed Object

3GPP Name
Modification period coefficient; Modification Period
3GPP Reference
TS 25.331;
TS 25.433;
TS 25.346
2-1275
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the modification period coefficient for

MBMS. MBMS modification period equals to 2^k*10ms, where k is
the modification period coefficient for MBMS. A modification period
to start from the frame with the SFN value fulfills the following
equation: SFN mod 2^k = 0.
Instance
RNC
ZWF24-01-A
MBMS FG
7..10
Unit
N/A
Default Value
Related Parameters
Kcs of CnInfo
Kps of CnInfo
MbmsModPrdCoeff >= max (Kcs, Kps).
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the modification period coefficient for
MBMS.
Related factors: timeliness of information update and UE power
consumption.
If this parameter is set to a greater value, the modification period for
MBMS is longer, and the timeliness of information update is worse.
If this parameter is set to a smaller value, the modification period for
MBMS is shorter, and the timeliness of information update is better,
but the UE consumes more power.
The default value takes information update timeliness and user UE
Reason
power consumption into consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-1276
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.40 Iu Interface Timers and Constants

Information(UIuCnst)
2.40.1 Iu Interface Timers and Constants Information Object ID
Full Name
Iu Interface Timers and Constants Information Object ID
Abbreviated Name
UIuCnstId
Managed Object
Iu Interface Timers and Constants Information(UIuCnst)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of Iu-interface timers and

constants information.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1277
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>PLMN Relating Configuration->Iu Interface Timers and Constants
Information
N/A
N/A
2.40.2 SRNC Wait Time for Relocation Preparation

Full Name
SRNC Wait Time for Relocation Preparation
Abbreviated Name
tRelocprep
Managed Object

3GPP Name
TRELOCprep
3GPP Reference
TS 25.413
Description
This parameter specifies the maximum time of the Relocation

Preparation procedure in the source RNC..When the SRNC
transmits a RELOCATION REQUIRED message to the CN,
timer Trelocprep is enabled. When receiving the RELOCATION
COMMAND message, the source RNC stops timer Trelocprep, and
terminates the Relocation Preparation procedure. If there is no
response from the CN to the RELOCATION REQUIRED message
before timer Trelocprep expires in the source RNC, the source
RNC cancels the Relocation Preparation procedure by initiating
the Relocation Cancel procedure with the appropriate value for the
Cause IE, e.g. "Trelocprep expiry".
Instance
RNC
2-1278
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-004
SRNS Relocation
Handover Control FG
1..300, step 1; Unit: 100ms
Unit
100ms
Default Value
60
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: IU interface parameter. This parameter
specifies the maximum time of the relocation preparation procedure

in the SRNC. When the SRNC sends the RELOCATION REQUIRED
message, the Trelocprep timer is enabled. When receiving the
RELOCATION COMMAND message, the RNC must disable the
Trelocprep timer and terminate the relocation preparation procedure.
If there is no response from the CN to the RELOCATION REQUIRED
message before timer Trelocprep expires in the SRNC, the SRNC
cancels the relocation preparation procedure by initiating the
relocation cancel procedure with "Trelocprep expiry" as the cause.
Related factors: Procedure delay and success rate of the relocation
procedure.
The greater the parameter value, the longer time the reallocation
preparation requires. With a greater timer, the success rate of
reallocation can be improved, but the delay is also improved.
The smaller the parameter value, the shorter time the reallocation
preparation requires. With a smaller timer, the success rate of
reallocation is decreased, and the delay is also decreased.
Reason
ZTE-CN. This parameter can also be set through negotiating with

the CN.
Change Take Effect
New Connection
No
2-1279
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.3 SRNC Overall Protective Time for Relocation

Full Name
SRNC Overall Protective Time for Relocation
Abbreviated Name
tRelocoverall
Managed Object

3GPP Name
TRELOCoverall
3GPP Reference
TS 25.413
Description
This parameter specifies the maximum time for protecting the entire
relocation procedure in the SRNC.
When receiving the RELOCATION COMMAND message the
source RNC stops timer Trelocprep, starts timer Trelocoverall and
terminates the Relocation Preparation procedure. If the CN fails
to start the Iu Release process after timer Trelocoverall expires,
the source RNC initiates the Iu Release Request procedure with
TRELOCoverall expiry as the cause.
Instance
RNC
ZWF21-03-004
SRNS Relocation
Handover Control FG
1..300, step 1; Unit: 100ms
Unit
100ms
Default Value
80
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-1280
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: IU interface parameter. It specifies the
maximum time for protecting the overall Relocation procedure in

the source RNC. Once the RELOCATION COMMAND message
is received, the source RNC stops timer Trelocprep, starts timer
Trelocoverall and terminates the Relocation Preparation procedure.
If the Iu Release procedure is not initiated towards the source RNC
from the CN before timer Trelocoverall expires, the source RNC
initiates the Iu Release Request procedure towards the CN with
"Trelocoverall expiry" as the cause.
Related factors: Reallocation procedure delay.
The smaller the parameter value, the shorter time the RNC
resources are suspended. However, if the value of this parameter
is too small, the CN does not have the time to complete the
reallocation procedure.
In normal cases, set it to 8 seconds.
Reason

the CN.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.4 Delay Time for Relocation after direct retry

Full Name
Delay Time for Relocation after direct retry
Abbreviated Name
tDrRetryRelocDelay
2-1281
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the longest duration for RAB queuing in the
RNC. The RNC returns an RAB failure message if the timer expires.
Instance
RNC and PLMN
N/A
N/A
1..300, step 1; Unit: 100ms
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2-1282
SJ-20141209142030-013|2015-11-12 (R1.3)
2.40.5 Start time to send the forwarded PDCP SDUs in the target
RNC during relocation of SRNS
Full Name
Start time to send the forwarded PDCP SDUs in the target RNC
during relocation of SRNS
Abbreviated Name
tDatafwd
Managed Object

3GPP Name
TDATAfwd
3GPP Reference
TS 25.413
Description
This parameter specifies the time to start sending the forwarded

PDCP SDUs in the target RNC during the relocation of SRNS.
During the relocation of the SRNS, the target RNC starts
the timer that equals to the value of the parameter after the
target RNC receives the UE's response, for example, the
RadioBearReconfigComplete message. After the timer expires,
the Target RNC begins to send the forwarded PDCP-SDUs to UE
including the Iu DL PDCP-SDUs.
Instance
RNC
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(1..300)ms, step 1ms
Unit
ms
Default Value
80
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
2-1283
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter specifies the time to start
sending the forwarded PDCP SDUs in the target RNC during the
relocation of the SRNS.
Related factors: general transmission delay and quality in uu
interface.
In normal cases, set it to 80 ms.
The default value is consistent with the commercial experience.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.6 Maximum Waiting Time for RESET in RNC

Full Name
Maximum Waiting Time for RESET in RNC
Abbreviated Name
tRafc
Managed Object

3GPP Name
TRafC
3GPP Reference
TS 25.413
Description
This parameter specifies the maximum time for waiting for the reset
procedure in the RNC.
After the RNC transmits a RESET message to the CN, if it fails to
receive the RESET ACKNOWLEDGE message within the time of
"Maximum Waiting Time for RESET in RNC", the RNC retransmits
the RESET message. If the number of times that the RESET
message is transmitted exceeds the maximum times, the RNC
terminates the process and reports the failure to the operation and
maintenance system.
2-1284
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
(1..120)s, step 1s
Unit
Default Value
8s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: IU interface parameter.
Related factors: RESET processing delay on the CN side. This

parameter value must be greater than the RESET process delay
in the CN.
Reason

the CN.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.7 Timer Before Sending RESET Response to CN

2-1285
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Timer Before Sending RESET Response to CN
Abbreviated Name
tRatc
Managed Object

3GPP Name
TRatC
3GPP Reference
TS 25.413
Description
This parameter specifies a guard period in the RNC before the RNC
transmits a RESET ACKNOWLEDGE message to the CN.
After the guard period of TRatC seconds, a RESET
ACKNOWLEDGE message is returned to the CN, indicating that all
references at the UTRAN have been cleared.
Instance
RNC
N/A
N/A
(5..60)s, step 1s
Unit
Default Value
18s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Related factors: RESET processing delay. The value of this

parameter must be equal or larger than the RESET process delay in
the RNC, and shall be smaller than the corresponding parameter
value in the CN. In normal cases, the value is set to 20 seconds.
Reason

the CN.
Change Take Effect
New Connection
No
2-1286
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.8 Timer for Sending RESOURCE RESET Response to CN

Full Name
Timer for Sending RESOURCE RESET Response to CN
Abbreviated Name
tResetDelay
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies a guard period in the RNC before sending

a RESET RESOURCE ACKNOWLEDGE message.
After guard period Tresetdelay, a RESET RESOURCE
ACKNOWLEDGE message is returned to the CN, indicating that all
references at the UTRAN have been cleared.
Instance
RNC
N/A
N/A
50..600, step 1; Unit: 100ms
Unit
100ms
Default Value
80
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-1287
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: IU interface parameter. This parameter sets the
protection time for the RNC to process the RESET RESOURCE

message received from the CN.
Related factors: processing delay of the global Iu procedure.
The greater the parameter value, the longer time the CN is
disconnected from RNC.
If the parameter value is too small, the RNC may not have enough
time to release the resource.
Reason

the CN.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.9 Timer for RESOURCE RESET Response from CN

Full Name
Timer for RESOURCE RESET Response from CN
Abbreviated Name
tResetwait
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1288
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter specifies the maximum time for the Reset Resource
procedure in the RNC.
After the RNC transmits a RESET RESOURCE message to the
CN, if it fails to receive the RESET RESOURCE ACKNOWLEDGE
message within period Tresetwait, the RNC retransmits the RESET
RESOURCE message. If the number of times that the RESET
RESOURCE message is retransmitted exceeds the maximum
times, the RNC terminates the procedure.
Instance
RNC
N/A
N/A
0..1200, step 1; Unit: 100ms
Unit
100ms
Default Value
50
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
Yes
Function Switch
N/A
Related factors: processing delay of the global Iu procedure.

A larger value helps to decrease message retransmission, but may
cause long time of RNC waiting.
A smaller value helps to decrease the waiting delay in the RNC, but
may cause that the CN may not have enough time to complete the
procedure and cause redundant message retransmission.
Reason

the CN.
Change Take Effect
New Connection
No
How to Impact
N/A
2-1289
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.10 Timer for Ignoring all OVERLOAD Messages or Signalling

Point Congested Information (TigOR)
Full Name
Timer for Ignoring all OVERLOAD Messages or Signalling Point

Congested Information (TigOR)
Abbreviated Name
tigOR
Managed Object

3GPP Name
TigOR
3GPP Reference
TS 25.413
Description
This parameter indicates the timer for ignoring OVERLOAD

messages or signaling point congestion information .When this timer
is enabled, all OVERLOAD messages or signaling point congestion
information are ignored.
Instance
RNC
N/A
N/A
(0..255)s, step 5s
Unit
Default Value
60
Related Parameters
TinTR
TigOR<=TinTR
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
2-1290
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: This parameter is used for ignoring OVERLOAD
messages.
Related factors: IU interface parameter. The value affects the
responding rate for decreasing the load of the CN. Currently, the
value of the CN is 10 seconds.
The greater the value, the slower the RNC responds to the Overload
message of the CN, and the slower the load of the RNC is reduced.
The smaller the value, the faster the RNC responds to the Overload
message of the CN, and the faster the load of the RNC is reduced.
This may easily trigger the ping-pong effect. Therefore, an
appropriate responding delay is required.
Reason

the CN.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.11 Timer for Not Allowing to Increase Traffic (TinTR)

Full Name
Timer for Not Allowing to Increase Traffic (TinTR)
Abbreviated Name
tinTR
Managed Object

3GPP Name
TinTR
3GPP Reference
TS 25.413
2-1291
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates a timer. When this timer is enabled, traffic

cannot be increased.
When this timer is enabled, the traffic cannot be increased in the
RNC system.
Instance
RNC
N/A
N/A
(0..300)s, step 10s
Unit
Default Value
100
Related Parameters
TigOR
TigOR<=TinTR
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: The timer for not allowing to increase traffic.
Related factors: IU interface parameter. The value affects the

responding rate for decreasing the load of the CN. Currently, the
value of the CN is 30 seconds.
The greater the parameter value, the slower the RNC load recovers.
The smaller the parameter, the easier the RNC triggers load
recovery, and the faster the services recover.
Reason

the CN.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
2-1292
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.40.12 Maximum Number of Retransmissions of the RESOURCE

RESET Message
Full Name
Maximum Number of Retransmissions of the RESOURCE RESET

Message
Abbreviated Name
nRepeatresrst
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

RESET RESOURCE message is retransmitted.
After the RNC transmits a RESET RESOURCE message to the CN,
if it fails to receive the RESET ACKNOWLEDGE message within
the waiting period, the RNC retransmits the RESET RESOURCE
message. If the number of times that the RESET RESOURCE
message is retransmitted exceeds the maximum times, the RNC
maintenance system.
Instance
RNC
N/A
N/A
1..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
Yes
2-1293
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
of times that RESET RESOURCE is retransmitted to the CN.

The greater the parameter value, the more times that the RNC
retransmits RESET RESOURCE to the CN if it does not receive
RESET RESOURCE ACKNOWLEDGE.
The smaller the parameter value, the less times that the RNC
retransmits RESET RESOURCE to the CN if it does not receive
RESET RESOURCE ACKNOWLEDGE.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.40.13 Maximum Number of Retransmissions of the RESET

Message
Full Name
Maximum Number of Retransmissions of the RESET Message
Abbreviated Name
nRepeatrst
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1294
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the number of times that the RESET

message is retransmitted.
After the RNC transmits a RESET message to the CN, if it fails to
receive the RESET ACKNOWLEDGE message within the time of
"Maximum Waiting Time for RESET in RNC", the RNC retransmits
the RESET message. If the number of times that the RESET
message is retransmitted exceeds the maximum times, the RNC
maintenance system.
Instance
RNC
N/A
N/A
1..5
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
of times that RESET is retransmitted to the CN .

The greater the parameter value, the more times that the RNC
retransmits RESET to the CN if it does not receive RESET
ACKNOWLEDGE.
The smaller the parameter value, the less times that the RNC
retransmits RESET to the CN if it does not receive RESET
ACKNOWLEDGE.
Reason
Change Take Effect
New Connection
No
2-1295
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Information
N/A
N/A
2.41 Dynamic Radio Bearer Control Information

Profile(UDrbcProfile)
2.41.1 Dynamic Radio Bearer Control Information Profile Object ID
Full Name
Dynamic Radio Bearer Control Information Profile Object ID
Abbreviated Name
UDrbcProfileId
Managed Object
Dynamic Radio Bearer Control Information Profile(UDrbcProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the dynamic radio bearer

control information profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-1296
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Global Information Configuration->Dynamic Radio Bearer Control
Information Profile
N/A
N/A
2.41.2 Drbc Strategy Configuration Index

Full Name
Drbc Strategy Configuration Index
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DRBC strategy configuration index.
Instance
RNC
ZWF21-04-004
0..255
Unit
N/A
Default Value
DRBC
2-1297
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the configuration index.
Configure an index number.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Restricted
OMC Access path
Information Profile
N/A
N/A
2.41.3 Drbc Strategy Name

Full Name
Drbc Strategy Name
Abbreviated Name
drbcStragyName
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DRBC strategy name.
Instance
RNC
ZWF21-04-004
2-1298
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the DRBC strategy name.
This parameter is mainly used to display the name and usage of a

set of DRBC parameters, which can be defined by users as required.
DRB strategy name
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Information Profile
N/A
N/A
2.42 Dynamic Radio Bearer Control Information(UDrbc)

2.42.1 Dynamic Radio Bearer Control Information Object ID
Full Name
Dynamic Radio Bearer Control Information Object ID
2-1299
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
UDrbcId
Managed Object
Dynamic Radio Bearer Control Information(UDrbc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of dynamic radio bearer

control information.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Information Profile->Dynamic Radio Bearer Control Information
N/A
2-1300
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.42.2 Event 4B Counter Threshold for HSPA Using DTX/DRX or

CELL_FACH using DRX to PCH or IDLE Shared by Uplink
and Downlink
Full Name
Event 4B Counter Threshold for HSPA Using DTX/DRX or

CELL_FACH using DRX to PCH or IDLE Shared by Uplink and
Downlink
Abbreviated Name
dxHsBo0E4bThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the event 4B counter threshold for HSPA

using DTX/DRX or CELL_FACH using DRX to PCH or IDLE shared
by uplink and downlink. For the HSPA UE using the DTX/DRX
and CELL_FACH using enhanced UE DRX, if the measured RLC
buffer payload of the uplink and downlink is zero, and the triggering
times of the event 4B reaches this threshold, UE will be transferred
from HSPA or CELL_FACH to PCH or IDLE, and the PCH state is
preferred.
Instance
RNC
ZWF26-01-007
ZWF26-01-008
UL DTX
DL DRX
1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
dToFachThd
dToFachThd<=DxHsBo0E4bThd
Parameters
Data Type
long
Parameter Type
2-1301
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the counter threshold of event 4B that
the RLC buffering payload is 0, and determines the transition from

HS-DSCH/E-DCH using DTX/DRX to PCH or Cell_FACH using DRX
to PCH or IDLE status change.
easier to trigger transition from HS-DSCH/E-DCH using DTX/DRX to
PCH or Cell_FACH using DRX to PCH or IDLE based on the traffic
volume, and the resources are released faster, but the DTX/DRX or
Cell_FACH DRX function can not be utilized fully.
If this parameter is set to a larger value, it is more difficult to
trigger transition from HS-DSCH/E-DCH using DTX/DRX to PCH or
Cell_FACH using DRX to PCH or IDLE based on the traffic volume,
thus DTX/DRX or Cell_FACH DRX can be used fully and the user
experience is good, but the release of radio resource is slow, which
affects the resource usage.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.3 Event 4A Counter Threshold for CELL_FACH to CELL_DCH

Full Name
Event 4A Counter Threshold for CELL_FACH to CELL_DCH Shared

by Uplink and Downlink
2-1302
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
fachE4aThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the event 4A counter threshold for

CELL_FACH->CELL_DCH. For the UE in CELL_FACH state, if the
measured RLC buffer payload of the uplink or downlink exceeds the
event 4A threshold, and the triggering times reaches this threshold,
UE will be transferred from CELL_FACH->CELL_DCH.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1303
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the counter threshold used to trigger event
4A that the status is changed from Cell_FACH to CELL_DCH.

responses to user requirements are faster, and it is easier to trigger
transition from Cell_FACH to CELL_DCH, but it may cause resource
waste.
If this parameter is set to a larger value, the responses to user
requirements are slower, and it is more difficult to trigger transition
from Cell_FACH to CELL_DCH, which affects the user experience.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

DCH->HSPA
Full Name
Event 4A Counter Threshold for Increasing Rate on DCH or

DCH->HSPA
Abbreviated Name
dchE4aThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1304
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

increasing rate on DCH or DCH->HSPA. For the UE using DCH in
both directions, if the times of the measured RLC buffer payload of
the uplink or downlink is larger than the 4A threshold exceed the
threshold indicated by this parameter, UE's data rate on DCH will be
increased or UE will be transferred from DCH to HSPA.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


1..255
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the counter threshold for 4A events used
for DCH rate increase or transition from DCH to HSPA.

responses to user requirements are faster, and it is easier to trigger
rate increase or channel transition, but it may cause resource waste.
If this parameter is set to a larger value, the responses to user
requirements are slower, and it is more difficult to trigger rate
increase or channel transition, which affects the user experience.
Reason
user experience.
Change Take Effect
Ongoing Connection
2-1305
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.5 Event 4B Counter Threshold for Decreasing Rate on DCH

Full Name
Event 4B Counter Threshold for Decreasing Rate on DCH
Abbreviated Name
dchE4bThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the event 4B counter threshold for

decreasing rate on DCH. For the UE used DCH in both directions,
if the times of the measured RLC buffer payload of the uplink or
downlink is less than the 4B threshold exceed the threshold indicated
by this parameter, UE's data rate on DCH will be decreased.
Instance
RNC
ZWF21-04-004
1..255
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
2-1306
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets counter threshold for 4B event used for
DCH rate decrease.

Configuration rule: If this parameter is set to a smaller value,
it is easier to trigger the rate decrease, which affects the user
experience.
the rate decrease, which improves the user experience, but may
cause resource waste.
The default value takes resource utilization and user experience
Reason
into consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.6 Event 4B Counter Threshold for CELL_DCH to PCH Shared

Full Name
Event 4B Counter Threshold for CELL_DCH to PCH Shared by

Uplink and Downlink
Abbreviated Name
dToPchThd
Managed Object

3GPP Name
N/A
2-1307
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description

CELL_DCH to PCH shared by uplink and downlink. For the UE
in CELL_DCH state, if the measured RLC buffer payload of the
uplink and downlink is zero, and the triggering times of the event
4B reaches this threshold, UE will be transferred from CELL_DCH
to PCH.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
DToIdleThd, dToFachThd
1)dToFachThd<=dToPchThd
Parameters
2)dToPchThd<=dToIdleThd
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the counter threshold for event 4B that

Cell_DCH to PCH.
Configuration rule: If this parameter is set to a smaller value, it
is easier to trigger transition from Cell_DCH to PCH based on
the traffic volume, and the resources are released faster, but it
also is easier to cause the ping-pong adjustment because of the
fluctuations of traffic volume.
transition from Cell_DCH to PCH based on the traffic volume, which
2-1308
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.7 Event 4B Counter Threshold for CELL_FACH without DRX

to PCH Shared by Uplink and Downlink
Full Name
Event 4B Counter Threshold for CELL_FACH without DRX to PCH

Abbreviated Name
fToPchThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

CELL_FACH without Enhanced UE DRX to PCH shared by uplink
and downlink. For the UE in CELL_FACH state, if the measured
RLC buffer payload of the uplink and downlink is zero, and the
triggering times of the event 4B reaches this threshold, UE will be
transferred from CELL_FACH to PCH.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A
2-1309
SJ-20141209142030-013|2015-11-12 (R1.3)


1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
fToIdleThd
fToPchThd<=fToIdleThd
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Cell_FACH to PCH.
easier to trigger transition from Cell_FACH to PCH based on the
traffic volume, and the resources are released faster, but it is easier
to cause ping-pong adjustment because of the fluctuations of traffic
volume.
transition from Cell_FACH to PCH based on the traffic volume,
which affects the resource usage.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-1310
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.42.8 Event 4B Counter Threshold for CELL_DCH to Idle Shared

Full Name
Event 4B Counter Threshold for CELL_DCH to Idle Shared by

Uplink and Downlink
Abbreviated Name
dToIdleThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

CELL_DCH to idle state shared by uplink and downlink when PCH
is not supported by UE or UTRAN. For the UE in CELL_DCH state,
if the measured RLC buffer payload of the uplink and downlink is
zero, and the triggering times of the event 4B reaches this threshold,
UE will be transferred from CELL_DCH to idle state.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
DToPchThd
2-1311
SJ-20141209142030-013|2015-11-12 (R1.3)
DToPchThd <DToIdleThd
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Cell_DCH to Idle.
easier to trigger transition from Cell_DCH to Idle based on the traffic
volume, and the resources are released faster, but it also is easier
to cause the ping-pong adjustment because of the fluctuations of
traffic volume, and increase the Uu signaling load.
transition from Cell_DCH to Idle based on the traffic volume, and it is
also easier to cause resource waste and affect the resource usage.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.9 Event 4B Counter Threshold for CELL_FACH without DRX

to Idle Shared by Uplink and Downlink
Full Name
Event 4B Counter Threshold for CELL_FACH without DRX to Idle

2-1312
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
fToIdleThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

CELL_FACH without enhanced UE DRX to idle state shared by
uplink and downlink when PCH is not supported. For the UE in
CELL_FACH state, if the UE or system does not support the PCH,
the measured RLC buffer payload of the uplink and downlink is zero,
and the triggering times of the event 4B reaches this threshold, UE
will be transferred from CELL_FACH to idle state.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
fToPchThd
;
fToPchThd<=fToIdleThd
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1313
SJ-20141209142030-013|2015-11-12 (R1.3)

Cell_FACH to IDLE.
easier to trigger transition from Cell_FACH to Idle based on the traffic
volume, and the resources are released faster, but it easier to cause
ping-pong adjustment because of the fluctuations of traffic volume.
transition from Cell_FACH to Idle based on the traffic volume, and it
is easier to cause resource waste, which affects the resource usage.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.10 Time Threshold for CELL_PCH or URA_PCH to Idle

Full Name
Time Threshold for CELL_PCH or URA_PCH to Idle
Abbreviated Name
pchHoldTimeThr
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1314
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the time threshold of UE staying in

CELL_PCH or URA_PCH for the judgment of transferring from
CELL_PCH or URA_PCH to idle.
If the time of UE having stayed in CELL_PCH or URA_PCH exceeds
the threshold indicated by this parameter, UE will be transferred
from CELL_PCH or URA_PCH to Idle.
Instance
RNC
ZWF21-04-004
(1..65535)s, step 1s
Unit
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the timers for triggering the transition from
CELL_PCH or URA_PCH to Idle.

Configuration rule: If this parameter is set to a larger value, the
PCH status stays for a longer time when there is no data. For the
service connection and release originated frequently, signaling
resources are saved because the RRC connection setup process
is not required.
If this parameter is set to a smaller value, the PCH status stays for a
shorter time, it is easier to enter Idle status, and the RRC connection
setup process is required when a new service is originated.
The default value takes intervals of general services into
Reason
consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
2-1315
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.42.11 Event 4B Counter Threshold for Cell_Dch to Cell_FACH

Full Name
Event 4B Counter Threshold for Cell_Dch to Cell_FACH
Abbreviated Name
dToFachThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

CELL_DCH to CELL_FACH. For the UE using CELL_DCH, if the
times of the measured RLC buffer payload of the downlink and the
uplink is smaller than their event 4Bs threshold separately, which
exceeds the threshold indicated by this parameter, the UE will be
transferred from CELL_DCH to CELL_FACH. For the streaming
service, it is forbidden to be transitioned to CELL_FACH, i.e. this
parameter is invalid.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


1..65535
Unit
N/A
Default Value
DRBC
2-1316
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
dxHsBo0E4bThd
, dToPchThd
1)dToFachThd<=DxHsBo0E4bThd
Parameters
2)dToFachThd<=dToPchThd
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum number of triggering times
for transition from Cell_DCH to Cell_FACH.

easier to switch Cell_DCH status to Cell_FACH status based on the
traffic volume, and the resources are released faster, but it may
cause ping-pong adjustment because of traffic volume fluctuation.
If this parameter is set to a larger value, it is more difficult to switch
Cell_DCH status to Cell_FACH status based on the traffic volume,
which affects the resource usage.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.12 Event 4A Counter Threshold for E-TTI Switching from 10ms

to 2ms
Full Name
Event 4A Counter Threshold for E-TTI Switching from 10ms to 2ms
2-1317
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
ettiEaThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

switching E-TTI from 10 ms to 2 ms. For the UE using E-DCH, if the
times of the measured user plane E-DCH throughput is larger than
the 4A threshold exceeding the threshold indicated by this parameter
and 10 ms E-TTI is used, UE's E-TTI will be switched to 2 ms.
Instance
RNC
ZWF25-01-033
ZWF26-03-004
Adaptive HSUPA TTI

DC-HSUPA

DC-HSUPA FG
1..255
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the event 4A counter threshold for
triggering the switching of E-TTI from 10 ms to 2ms.

Related factor: user experience.
the switching of E-TTI from 10 ms to 2 ms, and the user experience
will be affected.
switching of E-TTI from 10 ms to 2 ms. However, it is likely to cause
ping-pong adjustment due to the data volume fluctuation.
The default value takes user experience and ping-pong adjustment
Reason
into consideration.
2-1318
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.13 Event 4B Counter Threshold for E-TTI Switching from 2ms

to 10ms
Full Name
Event 4B Counter Threshold for E-TTI Switching from 2ms to 10ms
Abbreviated Name
ettiEbThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

switching E-TTI from 2 ms to 10 ms. For the UE using E-DCH, if the
times of the measured user plane E-DCH throughput is less than the
4B threshold exceeding the threshold indicated by this parameter
and 10ms E-TTI is used, UE's E-TTI will be switched to 10 ms.
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI
1..255
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
2-1319
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the event 4B counter threshold for
triggering the switching of E-TTI from 2 ms to 10 ms.

the switching of E-TTI from 2 ms to 10 ms, and the resource usage
will be affected.
switching of E-TTI from 2 ms to 10 ms. However, it is likely to cause
ping-pong adjustment due to the data volume fluctuation.
The default value takes resource utilization rate and user experience
Reason
into consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.14 Event A Counter Threshold for PS on DL DCH or DL AMR

Decreasing Rate Based on D-TCP
Full Name
Event A Counter Threshold for PS on DL DCH or DL AMR

Decreasing Rate Based on D-TCP
Abbreviated Name
dtcpEaThd
Managed Object

2-1320
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the reported times of threshold of DTCP

measurement event A. If the times of the event A that only uses
TCP is larger than this threshold, the speed of downlink PS or AMR
will be reduced.
Instance
RNC
ZWF21-04-004
ZWF21-04-005


1..255
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the counter threshold of event A that the
DCH rate decrement is triggered on the DL DCH based on the

D-TCP.
Related factors: user experience and call drop ratio.
easier to decrease the rate based on the D-TCP, but it is easier to
cause unnecessary rate decrease and affect the user experience.
If this parameter is set to a larger value, it is more difficult to decrease
the rate based on the D-TCP, and may increase the call drop ratio.
The default value takes user experience and risk of call drop into
Reason
consideration.
Change Take Effect
Ongoing Connection
No
2-1321
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.15 Event B Counter Threshold for Restriction PS Increasing

Rate on DL DCH or Triggering DL AMR Increasing Rate Based
on D-TCP
Full Name
Event B Counter Threshold for Restriction PS Increasing Rate on

DL DCH or Triggering DL AMR Increasing Rate Based on D-TCP
Abbreviated Name
dtcpEbThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the event B counter threshold of

consecutive DTCP reports. If the times of dedicated transmitted
code power is less than the event B threshold exceed the threshold
indicated by this parameter, it will trigger the downlink AMR
increasing rate or allow PS services to increase rate on DL DCH
based on traffic volume report.
Instance
RNC
ZWF21-04-004
ZWF21-04-005


1..255
2-1322
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the counter threshold of event B that the
DCH rate increment is restricted on the DL DCH based on the

D-TCP.
easier to trigger rate increment based on traffic volume, but it is
easier to cause ping-pong adjustment with rate decrease based on
D-TCP because of power fluctuation.
If this parameter is set to a larger value, it is more difficult to recover
from status of high transmission power, and thus it is difficult
to trigger rate increment based on traffic volume and the user
The default value is set based on user experience and ping-pong
Reason
adjustment.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1323
SJ-20141209142030-013|2015-11-12 (R1.3)
2.42.16 Switch of Transferring to CELL_FACH

Full Name
Switch of Transferring to CELL_FACH
Abbreviated Name
fachSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the other channels can be

transferred to CELL_FACH.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A
ZWF21-01-027

Fast Dormancy

Fast Dormancy FG
0: Off
1: On
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1324
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets whether other channels can be switched to
CELL_FACH.
Configuration rule: If the switch is on, the low rate traffic can be
carried in Cell_FACH status, and dedicated resources can be saved,
but it may increase the call drop ratio because there is no power
control in Cell_FACH status.
If the switch is off, the low rate traffic cannot be carried in Cell_FACH
status, and the effective resource usage becomes lower.
The default value is set to off to provide a better user experience.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.17 Switch of URA_PCH/CELL_PCH Support

Full Name
Switch of URA_PCH/CELL_PCH Support
Abbreviated Name
pchSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether URA_PCH/CELL_PCH is

supported or not.
Supported: The traffic can be carried on PCH channel when there
is no data.
Not supported: The traffic cannot be carried on PCH channel when
there is no data.
2-1325
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-04-004
ZWF21-01-027

Fast Dormancy

Fast Dormancy FG
0: Not Support
1: Only Support URA_PCH
2: Only Support CELL_PCH
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets whether to support URA_PCH/CELL_PCH.
Turn on the function, the UE can be transferred to PCH state when

there is no data transmission, and RRC connection setup process
is no need when there is data transmission.
Configuration rule: For the scene of frequent service setup and
release, if the switch is on, it will save radio resource of Uu interface,
but there is Cell Update in PCH state which may occupy some
resource.
Turn off the function, the UE cannotbe transferred to PCH state
when there is no data transmission, and it is transferred to Idle
state, and RRC connection setup process is need when there is
data transmission.
The default value is set to off. Because the RRC connection can be
Reason
quickly established without influencing the user experience, and

there is no cell update in idle status.
Change Take Effect
Ongoing Connection
No
2-1326
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.18 Increment Times of Event 4B0 for UE Which is not sensitive

for Battery Consumption Transferred to URA_PCH/CELL_PCH
or Idle state
Full Name
Increment Times of Event 4B0 for UE Which is not sensitive for

Battery Consumption Transferred to URA_PCH/CELL_PCH or Idle
state
Abbreviated Name
deltaNumE4B0Thd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the offset times of event 4B0 for UE

which is not sensitive for battery consumption is transferred to
URA_PCH/CELL_PCH or idle state based on the traffic volume
measurement. It is relative to other UEs. For this kind of UE,
the value of this parameter is larger, the transition for the UE to
URA_PCH or idle is more difficult.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A


2-1327
SJ-20141209142030-013|2015-11-12 (R1.3)
0..65535
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of times that the 4B0 event for
transferring the UE insensitive to power consumption to the PCH

state or idle state can be offset.
If this parameter is set to a greater value, it is more difficult to
transfer the UE that is insensitive to power consumption to the
PCH state to idle state, the user experience is better, and the UE
consumes more power.
If this parameter is set to a smaller value, it is easier to transfer the
UE that is insensitive to the power consumption to the PCH state
or idle state, the UE consumes less power, but the user experience
may be affected.
Reason
into consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1328
SJ-20141209142030-013|2015-11-12 (R1.3)

for UE Using Dtx/Drx
Full Name
Event 4B Counter Threshold for Cell_Dch to Cell_FACH for UE

Using Dtx/Drx
Abbreviated Name
dtxdrxToFachThd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

CELL_DCH to CELL_FACH for the UE which is using Dtx/Drx.
For the UE using Dtx/Drx, if the times of the measured RLC
buffer payload of the uplink and the downlink which is smaller
than the event 4Bs threshold exceed the threshold indicated by
this parameter, the UE will be transferred from CELL_DCH to
CELL_FACH.
Instance
RNC
ZWF26-01-007
ZWF26-01-008
UL DTX
DL DRX
1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1329
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the threshold for triggering the transition
from the Cell_DCH for the UE using the DTX/DRX function to the
Cell_FACH.
If this parameter is set to a smaller value, it is more likely to trigger
the transition from the Cell_DCH to the Cell_FACH based on the
traffic volume, and resources will be released faster. However, this
may cause ping-pong adjustment due to the fluctuation of traffic
volume.
If this parameter is set to a greater value, it is less likely to trigger the
transition from the Cell_DCH to the Cell_FACH based on the traffic
volume. In this case, the resource usage is affected.
Because the DTX/DRX function uses less resources, this parameter
can be configured to a relatively large value.
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.42.20 Event 4B0 Counter Threshold for the Smart Channel Switch
Full Name
Event 4B0 Counter Threshold for the Smart Channel Switch

Abbreviated Name
fastToFtimesThr
Managed Object

3GPP Name
N/A
2-1330
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the Event 4B0 counter threshold for the
smart channel switch judgment of CELL_DCH to CELL_FACH.
Instance
RNC
N/A
N/A
1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Function: Event 4B0 Counter Threshold for Cell_Dch to Cell_FACH.

The value of this parameter is smaller, it will be easier to trigger
Cell_DCH->Cell_Fach based on traffic volume measurement, and
the release of radio resource is also faster, but it also will be easier
to result in ping-pong adjustment because of the fluctuations of
traffic volume;
The value of this parameter is larger, it will be more difficult to trigger
Cell_DCH ->Cell_Fach based on traffic volume measurement, and
influence the utilization ratio of radio resources.
And at the same time, the parameter dToFachThd is recommended
to be set to larger.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
2-1331
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

DCH->HSPA for High Cell Load
Full Name
Event 4A Counter Threshold for Increasing Rate on DCH or

DCH->HSPA for High Cell Load
Abbreviated Name
dchE4aThdHighLoad
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of times that event

4A for triggering rate increase on DCH or DCH->DCH/HSPA
transition occurs when the cell load is high. For the UEs on DCH in
both directions, if the number of times that the measured RLC buffer
payload of the uplink or downlink is larger than the 4A threshold
exceeds the threshold indicated by this parameter, the data rate on
DCH is increased or the UE transmits from DCH to HSPA.
Instance
RNC
ZWF21-04-039
1..255
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
2-1332
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the threshold for 4A events
used for DCH rate increase or transition from DCH to HSPA when
the cell is in high load state.
Configuration rule: The smaller the parameter value is, the faster
the response to user requirements is, and the easier it is to trigger
rate increase or channel transition, but it may cause resource waste.
The larger the parameter value is, the slower the response to user
requirements is, and the more difficult it is to trigger rate increase or
channel transition, which may affect the user experience.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.42.22 Event 4B Counter Threshold for Decreasing Rate on DCH

for High Cell Load
Full Name
Event 4B Counter Threshold for Decreasing Rate on DCH for High

Cell Load
Abbreviated Name
dchE4bThdHighLoad
Managed Object

2-1333
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

4B for triggering rate decrease on DCH occurs when the cell load is
high. For the UEs on DCH in both directions, if the number of times
that the measured RLC buffer payload of the uplink or downlink is
lower than the 4B threshold exceeds the threshold indicated by this
parameter, the data rate on DCH is decreased.
Instance
RNC
ZWF21-04-039
1..255
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the threshold for 4B events
used for DCH rate decrease when the cell is in high load state.
Configuration rule: The smaller the parameter value is, the easier it
is to trigger the rate decrease, which may affect the user experience.
The larger the parameter value is, the more difficult it is to trigger
the rate decrease, which may improve the user experience, but it
may cause resource waste.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
2-1334
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path
Add
2.42.23 Event 4A Counter Threshold for CELL_FACH to CELL_DCH

Shared by Uplink and Downlink for High Cell Load
Full Name
Event 4A Counter Threshold for CELL_FACH to CELL_DCH Shared

by Uplink and Downlink for High Cell Load
Abbreviated Name
fachE4aThdHighLoad
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

4A for triggering CELL_FACH -> CELL_DCH transition occurs
when the cell load is high. For the UEs in CELL_FACH state, if the
number of times that the measured RLC buffer payload of the uplink
or downlink is greater than the 4A threshold exceeds the threshold
indicated by this parameter, the UEs transmit from the CELL_FACH
state to the CELL_DCH state.
Instance
RNC
ZWF21-04-039
1..65535
Unit
NA
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
WORD
2-1335
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the threshold used to
trigger event 4A that causes the status to change from Cell_FACH

to CELL_DCH when the cell is in high load state.
Configuration rule: The smaller the parameter value is, the faster
the response to user requirements is, and the easier it is to trigger
transition from Cell_FACH to CELL_DCH, but it may cause resource
waste.
The larger the parameter value is, the slower the response to user
requirements is, and the more difficult it is to trigger transition from
Cell_FACH to CELL_DCH, which may affect the user experience.
Reason
experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add

for High Cell Load
Full Name
Event 4B Counter Threshold for Cell_Dch to Cell_FACH for High

Cell Load
Abbreviated Name
dToFachThdHighLoad
Managed Object

2-1336
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

4B for triggering CELL_DCH -> CELL_FACH transition occurs
when the cell load is high. For the UEs in CELL_DCH state, if the
number of times that the measured RLC buffer payload of the uplink
and downlink is less than their respective 4B threshold exceeds
the threshold indicated by this parameter, the UEs transmit from
the CELL_DCH state to the CELL_FACH state. For the streaming
service, transition to CELL_FACH is not allowed and therefore this
parameter is invalid.
Instance
RNC
ZWF21-04-039
1..65535
Unit
NA
Default Value
Related Parameters
dToPchThd
dToFachThdHighLoad <= dToPchThd
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the maximum number of
times of triggering event 4B that causes transition from Cell_DCH to

Cell_FACH when the cell is in high load state.
Configuration rule: The smaller the parameter value is, the easier it
is to switch from Cell_DCH status to Cell_FACH status based on the
traffic volume, and the faster the resources are released, but it may
cause ping-pong adjustment due to traffic volume fluctuation.
The larger the parameter value is, the more difficult it is to switch
from Cell_DCH status to Cell_FACH status based on the traffic
volume, which may affect the resource usage.
Reason
experience.
2-1337
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.42.25 Whether the State Transition Due to Reduced Traffic

Volume is Triggered by Event 4B of Either Direction
Full Name
Whether the State Transition Due to Reduced Traffic Volume is

Triggered by Event 4B of Either Direction
Abbreviated Name
drbcTrigByEiDir4b
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not the state transition to

CELL_FACH/CELL_PCH/URA_PCH/IDLE and the state transition
from HS-DSCH/E-DCH or HS-DSCH/DCH to DL DCH/UL DCH in a
concurrent CS and PS service scenario due to reduced traffic can
be triggered by events 4B/4B0 in either direction.
If this parameter is set to "0: False", the mentioned state transitions
can only be triggered by events 4B/4B0 from the user plane in the
downlink when all channel transition conditions (for example, traffic
volume in the uplink and downlink) are met.
If this parameter is set to "1: True", the mentioned state transitions
can be triggered by 4B/4B0 measurement reports from the uplink
or from the user plane in the downlink when all channel transition
conditions (for example, traffic volume in the uplink and downlink)
are met.
Instance
RNC
2-1338
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-004
ZWF23-04-004
ZWF25-04-005
ZWF21-05-026
ZWF26-01-011
ZWF26-02-003
Dynamic Radio Bearer Control/

Dynamic Channel Type Transfer for HSDPA Service/
Dynamic Channel Type Transfer for HSUPA
Service/
Service Optimization for Multi-RAB/Enhanced DL CELL_FACH/Enhanced UL CELL_FACH
Dynamic Radio Bearer Control FG/

ZTE UMTS HSDPA Introduction Feature Guide/ZTE UMTS HSUPA
Introduction Guide/
0: False
1: True
Unit
NA
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Related factors: resource utilization, state transition, and user
experience
If this parameter is set to "0: False", the related state transitions
can be triggered only by events 4B/4B0 from the user plane in the
downlink. In this case, the state transition is slow and the release of
resources and the experience of other users are affected.
If this parameter is set to "1: True", the related state transitions can
be triggered by events 4B/4B0 from the downlink or uplink. In this
case, the state transition quickens. However, the subsequent events
4A and related state transitions may increase.
Reason
Change Take Effect
Immediately at commit at commit

2-1339
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.42.26 Event 4B Counter Threshold for CELL_DCH to PCH Shared

Full Name
Event 4B Counter Threshold for CELL_DCH to PCH Shared by

Uplink and Downlink
Abbreviated Name
dToPchThd
Managed Object
UDrbc
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the event 4B counter threshold used to

determine whether the UE is transitioned from the CELL_DCH state
to PCH state. This threshold is shared by uplink and downlink. For
the UE in CELL_DCH state, if the measured RLC buffer payload of
the uplink and downlink is zero, and the number of times that the
event 4B is triggered reaches this threshold, the UE is transferred
from the CELL_DCH state to PCH state.
Instance
RNC
ZWF21-04-004
ZWF23-01-A
ZWF25-01-A
ZWF21-05-026
2-1340
SJ-20141209142030-013|2015-11-12 (R1.3)



1..65535
Unit
N/A
Default Value
DRBC
Related Parameters
DToIdleThd, dToFachThd

Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
NO
Function Switch
No

Cell_DCH to PCH.
Configuration rule: If this parameter is set to a smaller value, it
is easier to trigger transition from Cell_DCH to PCH based on
the traffic volume, and the resources are released faster, but it
also is easier to cause the ping-pong adjustment because of the
fluctuations of traffic volume.
transition from Cell_DCH to PCH based on the traffic volume, which
Reason
user experience.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
2-1341
SJ-20141209142030-013|2015-11-12 (R1.3)

Access
read/write
OMC Access path
V4.11.20.01
Modify
2.43 Global Access Control Information(UGloAc)

2.43.1 Global Access Control Information Object ID
Full Name
Global Access Control Information Object ID
Abbreviated Name
UGloAcId
Managed Object
Global Access Control Information(UGloAc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of global admission control

information.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-1342
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Global Access Control Information
N/A
N/A
2.43.2 True Queue Length

Full Name
True Queue Length
Abbreviated Name
qLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of the congested

calls in the true queue.
Instance
RNC
ZWF21-04-010
Congestion Control
0..32, 0 means queuing function is not supported
Unit
N/A
Default Value
16
Related Parameters
N/A
2-1343
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
of the congested calls in the true queue.

Related factors: successful call rate, and access time delay.
If the parameter value is larger, it will improve the successful call
rate but affect the access time delay.
When call requests are congested, the smaller the parameter value,
the lower the successful call rate, and the shorter the access delay.
The successful call rate and the access time delay are considered
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.43.3 Time of True Queue for Congested Service in RAB Setup

Process
Full Name
Time of True Queue for Congested Service in RAB Setup Process
Abbreviated Name
tTrueQ
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1344
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum wait time in the true queue
after the call setup request is refused by the Call Admission Control
(CAC) algorithm.
Instance
RNC
ZWF21-04-010
Congestion Control
(1..60)s, step 1s
Unit
Default Value
10s
Related Parameters
N/A
Configuration Note: The parameter value should not be longer than
Parameters
RAB response waiting timer of CN.
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: This parameter indicates the maximum wait
time in the true queue after the call setup request is refused by the
Call Admission Control (CAC) algorithm.
Related factors: successful call rate, and the access time delay.
When call requests are congested, the larger the parameter value,
the higher the successful call rate, and the longer the access delay.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1345
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.43.4 Time of True Queue for Congested Service Relocating into

UTRAN
Full Name
Time of True Queue for Congested Service Relocating into UTRAN
Abbreviated Name
tTrueQReloc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum wait time in the true queue
for an incoming relocation after the relocation request is refused by
the Call Admission Control (CAC) algorithm.
"0" means no queue process is executed for an incoming relocation.
Instance
RNC
ZWF21-04-010
Congestion Control
(0..60)s, step 1s
Unit
Default Value
4s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
N/A
2-1346
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the maximum wait
time in the true queue for an incoming relocation after the relocation
request is refused by the Call Admission Control (CAC) algorithm.
When call requests are congested, the larger the parameter value,
the higher the successful call rate, and the longer the access delay.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.43.5 Maximum Time in the True Queue when Service be Forced

into Queue
Full Name
Maximum Time in the True Queue when Service be Forced into

Queue
Abbreviated Name
tTrueQForced
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1347
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum time in the true queue when
a service is forced into a queue. In the condition that there is no
queue information or the assigned RAB has no queue ability in the
RAB assignment information, if the forced queue switch is set to
"On", this RAB has the queue ability, and this parameter indicates
the maximum time in the true queue.
Instance
RNC
ZWF21-05-023
ZWF21-04-010
RAB Queuing
Congestion Control
(1..60)s, step 1s
Unit
Default Value
6s
Related Parameters
N/A
This parameter must be smaller than or equal to the RAB response
Parameters
waiting timer length which is configured in CN.
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Parameter function: This parameter indicates the maximum time
in the true queue when a service is forced into a queue. In the

condition that there is no queue information or the assigned RAB
has no queue ability in the RAB assignment information, if the forced
queue switch is set to "On", this RAB has the queue ability, and this
parameter indicates the maximum time in the true queue.
The larger the parameter value, the higher the successful call rate,
but the access time delay is increased.
The smaller the parameter value, the lower the successful call rate,
and the access time delay is decreased.
As an interconnection parameter, this parameter must be configured
less than or equal to the CN wait timer for the RAB response.
Reason
Change Take Effect
No
2-1348
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.43.6 Switch of AMR Traffic Re-admission after AMR Rate

Decrease
Full Name
Switch of AMR Traffic Re-admission after AMR Rate Decrease
Abbreviated Name
amrDnRateAcSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates when AMR traffic is being admitted and

this switch is on, if MaxBR is used but the admission fails due to soft
resource limitation, the lowest assigned rate is used for carrying
out admission again.
Instance
RNC
ZWF21-04-001
Admission Control
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-1349
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a switch that enables AMR
traffic re-admission after AMR rate decrease.

Related factors:
If this switch is turned on, after the access with the maximum bit rate
is rejected, the AMR service tries to access with the lowest assigned
rate. In this way, the AMR call success rate is increased.
If this switch is turned off, after the access with the maximum bit rate
is rejected, an AMR service call fails.
By enabling this function, the AMR service call success rate can
Reason
be increased.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.43.7 Forced Queue Switch for AMR Service

Full Name
Forced Queue Switch for AMR Service
Abbreviated Name
forcQueSwiAMR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1350
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the forced queue switch for AMR services.
In the condition that there is no queue information or the assigned
RAB has no queue ability in the AMR RAB assignment information,
if the forced queue switch is set to "On", this AMR service has the
queue ability. If the forced queue switch is set to "Off", this AMR
service has not the queue ability.
Instance
RNC
ZWF21-05-023
ZWF21-04-010
RAB Queuing
Congestion Control
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the forced queue
switch for AMR services. In the condition that there is no queue

information or the assigned RAB has no queue ability in the AMR
RAB assignment information, if the forced queue switch is set to
"On", this AMR service has the queue ability. If the forced queue
switch is set to "Off", this AMR service has not the queue ability..
Related factors: AMR service successful call rate, and differentiation
of queue ability for AMR services.
If the function is enabled, the AMR RAB has the queue ability
in any case so that the successful call rate is increased but the
differentiation of queue ability for AMR services cannot be achieved.
If the function is disabled, the AMR RAB has not the queue ability
when there is no queue information or no queue ability in the AMR
RAB assignment information. As a result, the successful call rate is
decreased but the differentiation of queue ability for AMR services
can be achieved.
2-1351
SJ-20141209142030-013|2015-11-12 (R1.3)
The AMR service successful call rate and the differentiation of queue
Reason
ability for AMR services are considered to define this default value.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.43.8 Forced Queue Switch for CS 64kbps service

Full Name
Forced Queue Switch for CS 64kbps service
Abbreviated Name
forcQueSwiCS64
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the forced queue switch for CS 64 kbps

service. In the condition that there is no queue information or the
RAB be assigned has no queue ability in the CS 64 kbps service
RAB assignment information, if the forced queue switch is "On",
then this CS 64 kbps service has the queue ability.
Instance
RNC
ZWF21-05-023
ZWF21-04-010
RAB Queuing
Congestion Control
0: Off
1: On
Unit
N/A
2-1352
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the forced queue
switch for CS 64 kbps services. In the condition that there is no

queue information or the assigned RAB has no queue ability in
the CS 64 kbps service RAB assignment information, if the forced
queue switch is set to "On", this CS 64 kbps service has the queue
ability. If the forced queue switch is set to "Off", this CS 64 kbps
service has not the queue ability.
Related factors: successful call rate for CS64k services, and
differentiation of queue ability for CS64k services.
If the function is enabled, the CS64k RAB has the queue ability
in any case so that the successful call rate for CS64k services is
increased but the differentiation of queue ability for CS64k services
can not be achieved.
If the function is disabled, the CS64k RAB has not the queue ability
when there is no queue information or no queue ability in the CS64k
RAB assignment information. As a result, the successful call rate for
CS64k services is decreased but the differentiation of queue ability
for CS64k services can be achieved.
The CS64k service successful call rate and the differentiation of
Reason
queue ability for CS64k services are considered to define this

default value.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1353
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44 Hspa Configuration(UHspa)

2.44.1 Hspa Configuration Object ID
Full Name
Hspa Configuration Object ID
Abbreviated Name
UHspaId
Managed Object
Hspa Configuration(UHspa)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of global HSPA information.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-1354
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Hspa Configuration
N/A
N/A
2.44.2 RNC F-DPCH Support Indicator

Full Name
RNC F-DPCH Support Indicator
Abbreviated Name
rncFdpchSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports the F-DPCH

or not.
Instance
RNC
ZWF23-01-041
ZWF23-04-004

Dynamic Channel Type Transfer for HSDPA Service

0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1355
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: RNC level function switch of F-DPCH
Configuration Rule: It should be set to "Supported" if the operator

pays for this feature.
Adjustment Suggestion: Multiple HSDPA users could use the same
F-DPCH so that more code is saved.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.3 RNC Enhanced F-DPCH Support Indicator

Full Name
RNC Enhanced F-DPCH Support Indicator
Abbreviated Name
rncEfdpchSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports the Enhanced

F-DPCH or not.
Instance
RNC
ZWF26-01-010
ZWF23-04-004
Enhanced F-DPCH
Enhanced F-DPCH FG
2-1356
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: RNC level function switch of Enhanced F-DPCH

pays for this feature.
Adjustment Suggestion: More HSDPA users could multiplex on the
same E-F-DPCH comparing to F-DPCH
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.4 RNC MIMO and DL64QAM Combined Capability Support

Indicator
Full Name
RNC MIMO and DL64QAM Combined Capability Support Indicator
Abbreviated Name
rncMimo64QamInd
Managed Object
2-1357
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether RNC supports to activate downlink

64QAM and MIMO at the same time
Instance
RNC
ZWF26-02-001
Combination of 64QAM and MIMO
Combination of 64QAM and MIMO FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether RNC supports to
activate downlink 64QAM and MIMO at the same time.

Configuration Rule:
It should be set to "Supported" if the RNC supports activate MIMO
and 64QAM at the same time.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1358
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.44.5 DPCH Code Re-Assign Support Indicator

Full Name
DPCH Code Re-Assign Support Indicator
Abbreviated Name
codeReAssInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the function to re-assign the

downlink DPCH channelization code in HSDPA cell is supported
or not.
Instance
RNC
ZWF23-04-006
Code Allocation for HSDPA
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
CodeReAssPrd, CodeReAssHy
CodeReAssPrd, CodeReAssHy are valid only if CodeReAssInd is
Parameters
set to "1: Support".
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether the function to re-assign
the downlink DPCH channelization code in HSDPA cell is supported

or not. It should be set to "Supported" if the operator bought this
feature.
N/A
Reason
Change Take Effect
2-1359
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.6 DPCH Code Re-Assign Period

Full Name
DPCH Code Re-Assign Period
Abbreviated Name
codeReAssPrd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period to judge whether to re-assign

the channelization codes of one or several downlink DPCH.
Instance
RNC
ZWF23-04-006
(5..65535)s, step 5s
Unit
Default Value
10s
Related Parameters
CodeReAssInd
Valid only when CodeReAssInd is set to "1: Support"
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-1360
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Function: Indicate the period to judge whether to re-assign the
DPCH code.
Configuration Rule:
The smaller the value is, the shorter the interval is to judge whether
to re-assign the DPCH code.
The smaller the value is, the longer the interval is to judge whether
to re-assign the DPCH code.
Adjustment Suggestion: It should be set to smaller value if the
HSDPA throughput congestion is frequently happened.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.7 DTX/DRX Switch

Full Name
DTX/DRX Switch
Abbreviated Name
dtxDrxSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the DTX/DRX switch indicating whether DTX/DRX

is allowed to be used. When the value of the switch is "On",
DTX/DRX is allowed to be used by the system; otherwise DTX/DRX
is not allowed to be used.
Instance
RNC
2-1361
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF26-01-007
ZWF26-01-008
UL DTX
DL DRX
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter is the DTX/DRX switch indicating whether
DTX/DRX is allowed to be used.

Configuration Rule: Open or close DTX/DRX function according to
the requirement of the operator.
Default value is "Closed", which should be adjusted according to
Reason
the requirement of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.8 DTX Switch for Speech

2-1362
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
DTX Switch for Speech
Abbreviated Name
rtDtxSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the DTX switch for real time speech services
indicating whether DTX is allowed to be used. When the value of
the switch is "On", the speechreal time services are allowed to use
DTX, otherwise not allowed.
Instance
RNC
ZWF26-01-007
UL DTX
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter is the DTX switch for non-realtime
services indicating whether DTX is allowed to be used.

Configuration Rule: According to the actual requirement of the
operator.
According to the actual requirement of the operator.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
2-1363
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.44.9 DTX Switch for NRT

Full Name
DTX Switch for NRT
Abbreviated Name
nrtDtxSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the DTX switch for non-realtime services indicating

whether DTX is allowed to be used. When the value of the switch is
"On", the non-realtime services are allowed to use DTX, otherwise
not allowed.
Instance
RNC
ZWF26-01-007
UL DTX
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-1364
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter is the DTX switch for non-realtime
services indicating whether DTX is allowed to be used.

Configuration Rule: According to actual requirement of the operator.
DTX switch for non-realtime services is closed by default, which
Reason
should be adjusted according to the actual requirement of the

operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.10 DRX Switch for Speech

Full Name
DRX Switch for Speech
Abbreviated Name
rtDrxSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Function: for real time speech services indicating whether DRX is

allowed to be used. The switch is only valid when RtDtxSwch is
on. DRX function can prolong the UE's battery life.Because DRX
is used only when DTX is used, the DTX/DRX can reduce uplink
interference.
operator.
Instance
RNC
ZWF26-01-008
DL DRX
2-1365
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
RtDtxSwch of HSPA
Only valid when RtDtxSwch is 'On"
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: for real time speech services indicating whether DRX is
allowed to be used.
operator.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.11 DRX Switch for NRT

Full Name
DRX Switch for NRT
Abbreviated Name
nrtDrxSwch
Managed Object
2-1366
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
Function: for non-real time speech services indicating whether DRX

is allowed to be used. The switch is only valid when RtDtxSwch is
on. DRX function can prolong the UE's battery life.Because DRX
is used only when DTX is used, the DTX/DRX can reduce uplink
interference.
operator.
Instance
RNC
ZWF26-01-008
DL DRX
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
NrtDtxSwch of HSPA
Only valid when NrtDtxSwch is 'On"
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter is the DRX switch for non-realtime
services indicating whether DTX/DRX is allowed to be used.

Configuration Rule: According to actual requirement of the operator.
DTX/DRX switch for non-realtime services is closed by default,
Reason
which should be adjusted according to the actual requirement of

the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
2-1367
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.44.12 HS-SCCH Less Switch

Full Name
HS-SCCH Less Switch
Abbreviated Name
hsscLessSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch which indicates whether HS-SCCH Less

is allowed to be used by the RNC
Instance
RNC
ZWF26-01-005
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-1368
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter is a switch which indicates whether
HS-SCCH Less is allowed to be used by the RNC.

Configuration Rule: According to whether the operator has
purchased the HS-SCCH Less license.
HS-SCCH Less is closed by default, which should be adjusted if the
Reason
operator has purchased the HS-SCCH Less license.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.13 HS-SCCH Less Switch for Non-VoIP/AMR

Full Name
HS-SCCH Less Switch for Non-VoIP/AMR
Abbreviated Name
nvHsscLessSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is HS-SCCH Less switch for non-VoIP/AMR

services. When the value of the switch is "On", other services
except VoIP/AMR are allowed to use HS-SCCH Less, otherwise
not allowed.
Instance
RNC
ZWF26-01-005
0: Off
1: On
2-1369
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter is HS-SCCH Less switch for
non-VoIP/AMR services.
operator.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.14 RNC Downlink Enhanced Layer 2 Support Indicator

Full Name
RNC Downlink Enhanced Layer 2 Support Indicator
Abbreviated Name
rncDlEnL2Ind
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1370
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the RNC supports the Downlink

Enhanced Layer 2 function or not.
Instance
RNC
ZWF26-01-002
HSPA Enhanced L2 FG
0: Not Support
1: Support
Unit
N/A
Default Value
1: Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
The function of this parameter: This parameter indicates whether
the RNC supports the Downlink Enhanced Layer 2 function or not.

The involved factor for setting this parameter: Layer2 Enhancement
is the basic function for all HSPA+ functions. So the default value is
Supported. And HSPA+ function activation does not depend on this
parameter's value.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1371
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.15 RNC Uplink Enhanced Layer 2 Support Indicator

Full Name
RNC Uplink Enhanced Layer 2 Support Indicator
Abbreviated Name
rncUlEnL2Ind
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports the Uplink

Enhanced Layer 2 function or not.
Instance
RNC
ZWF26-02-002
HSPA Enhanced L2 FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
RncDlEnL2Ind
RncUlEnL2Ind can only be set as 'Supported' only when
Parameters
RncDlEnL2Ind is 'Supported'.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether the RNC supports the
uplink enhanced layer 2 function or not.

Related Factor: Cell throughput.
The uplink enhanced layer 2 function can improve the cell uplink
throughput. It's suggested to be set to "support" as soon as the
equipment supports.
It is set to 'Not Support' by default for some Ues are not fully
Reason
compatible with this feature currently.
Change Take Effect
New Connection
No
0
2-1372
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.16 RNC 64QAM Support Indicator

Full Name
RNC 64QAM Support Indicator
Abbreviated Name
rnc64QAMInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports the 64QAM

function or not.
Instance
RNC
ZWF26-01-001
64QAM for HSDPA
64QAM for HSDPA FG
0: Not Support
1: Support
Unit
N/A
Default Value
1: Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-1373
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: RNC level function switch of 64QAM

pay for this feature.
Adjustment Suggestion: Supporting this function will increase the
HSDPA throughput.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.17 RNC MIMO Support Indicator

Full Name
RNC MIMO Support Indicator
Abbreviated Name
rncMIMOInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports the MIMO

function or not.
Instance
RNC
ZWF26-01-003
HSDPA MIMO
HSDPA MIMO FG
0: Not Support
1: Support
Unit
N/A
2-1374
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
1: Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: RNC level function switch of MIMO

pay for this feature.
Adjustment Suggestion: Supporting this function will increase the
HSDPA throughput.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.18 Switch for Limiting HSDPA GBR Resource Consumption

Full Name
Switch for Limiting HSDPA GBR Resource Consumption
Abbreviated Name
hsGBRLimitSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1375
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is a switch indicating whether the HSDPA GBR

resource consumption limitation algorithm is supported when
HSDPA GBR users are in bad radio conditions.
Instance
RNC
ZWF23-04-002
Overload Control for HSDPA Service
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It is the switch of the HSDPA GBR resource
consumption limitation function.

Related factors:
Considering the cell capacity, if there is a need to limit the resource
consumption of the HSDPA GBR service, the switch should be
turned on.
To avoid the impact on the quality of HSDPA GBR services in the
Reason
initial stage, this function should be disabled.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1376
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.19 Support Type of Downlink RLC Flexible PDU Size Format

Full Name
Support Type of Downlink RLC Flexible PDU Size Format
Abbreviated Name
rlcSizeSuptType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the type of RLC PDU Size (Flexible Size or
Fixed Size). If the parameter is set to Flexible Size, the overhead
of the MAC header can be reduced, and the Iub throughput can
be improved. Therefore, it is suggested to use Flexible Size for
services. For signaling, Fixed Size is suggested due to little MAC
header overhead. (In 3GPP Rel-9 and later, signaling can only use
Fixed Size.)
Instance
RNC
ZWF26-01-002
HSPA Enhanced L2 FG
1: Signalling Fixed Mode, Service Flexible Mode

2: Signalling and Conversational Service Fixed Mode, other Service
Flexible Mode
3: All Fixed Mode
Unit
N/A
Default Value

Flexible Mode
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1377
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: support type of RLC PDU Size format (Flexible
Size or Fixed Size).

Related factors: UE compatibility, traffic performance.
Effect: This parameter indicates the support type of RLC PDU Size
format. For traffic with big data packets, if the parameter is set to
Flexible Size, the overhead of the MAC header can be reduced,
and the Iub throughput can be improved. For traffic with small data
packets, if the parameter is set to Flexible Size, the gain is not
obvious. It is suggested to set the parameter to Fixed Size.
Adjustment suggestion: This parameter indicates the support
type of RLC PDU Size format. If the parameter is set to Flexible
Size, the overhead of the MAC header can be reduced, and the
Iub throughput can be improved. Therefore, for conversational
services, it is suggested to use Fixed Size, and for other services, it
is suggested to use Flexible Size. For signaling, it is specified that
only the Fixed Size can be used in 3GPP Rel-9 and later.
This parameter indicates the type of RLC PDU Size (Flexible Size or
Reason
Fixed Size). If the parameter is set to Flexible Size, the overhead

of the MAC header can be reduced, and the Iub throughput can be
improved. Therefore, for conversational services, it is suggested
to use Fixed Size; and for other services, it is suggested to use
Flexible Size. For signaling, Fixed Size can only be used in 3GPP.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.20 Support Type of Uplink RLC Flexible PDU Size Format

Full Name
Support Type of Uplink RLC Flexible PDU Size Format
Abbreviated Name
ulRlcSizeSptType
Managed Object
2-1378
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the support type of RLC flexible PDU size
format for uplink signalling and service.
Instance
RNC
ZWF26-02-002
HSPA Enhanced L2 FG
1: Signalling Fixed Mode, Service Flexible Mode

Flexible Mode
3: All Fixed Mode
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
The function of this parameter: This parameter indicates the support
type of RLC PDU size format for signalling and service. (Flexible
Size or Fixed Size)
Related factors: UE capability; traffic performance.
Effect: This parameter indicates the support type of RLC PDU size
format for signalling and service.For traffic, Flexible Size can reduce
the MAC head cost and improve the Iub throughput; For signalling,
Fixed Size is suggested to use for little MAC head cost.
Adjustment suggestion: This parameter indicates the support type of
RLC PDU size format for signalling and service. Traffic is suggested
to set to Flexible Size, for Flexible Size can reduce the MAC head
cost and improve the Iub throughput; For signalling, Fixed Size is
suggested to use for little MAC head cost. (Flexible Size is only for
traffic, and signalling can only use Fixed Size in 3GPP Release
9 or later.)
2-1379
SJ-20141209142030-013|2015-11-12 (R1.3)
his parameter indicates the support type of RLC PDU size format for
Reason
signalling and service. Traffic is suggested to set to Flexible Size,

for Flexible Size can reduce the MAC head cost and improve the Iub
throughput; For signalling, Fixed Size is suggested to use for little
MAC head cost. (Flexible Size is only for traffic, and signalling can
only use Fixed Size in 3GPP Release 9 or later.)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.21 RNC DC+MIMO Support Indicator

Full Name
RNC DC+MIMO Support Indicator
Abbreviated Name
rncDcMimoSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports simultaneous

activation for Dual Cell and MIMO.
The rate of 84Mbps peak throughput using 10MHz bandwidth in
downlink is possible in the DC-HSDPA+MIMO+64QAM combination.
Instance
RNC
ZWF26-03-001
Combination of DC-HSDPA with MIMO and 64QAM
Combination of DC-HSDPA with MIMO and 64QAM FG
0: Not Supported
1: Supported
2-1380
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
1: Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether Dual Cell and MIMO can
be activated simultaneously in the RNC.

Related factors: network layout and HSDPA throughput of UEs.
When the parameter is set to "Supported", the RNC supports the
function of activating Dual Cell and MIMO simultaneously in the
Radio Link Setup message or Radio Link Reconfiguration message,
which can increase the HSDPA throughput of UEs, otherwise, the
RNC does not support the function.
RncMIMOInd only indicates whether the RNC supports the MIMO
function and DcHsdschSptInd only indicates whether the RNC
supports the Dual Cell function, but even both parameters are set
to "Supported", it does not mean that the cell can simultaneously
activate the MIMO and Dual Cell functions in a radio link.
The equipment is equipped with one antenna, so the MIMO function
Reason
is not supported.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1381
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.22 Dual-band or Single-Band Dual-Cell HS-DSCH Support

Indication
Full Name
Dual-band or Single-Band Dual-Cell HS-DSCH Support Indication
Abbreviated Name
dcOrDbHsdschSptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the Dual-Cell HS-DSCH

(Single-Band or Dual-Band) function is supported. This is a
RNC-level switch, which must be set to "1: Supported" if the
Dual-Cell HS-DSCH is used in the RNC.
Instance
RNC
ZWF26-02-004
ZWF26-03-002
DC-HSDPA
Dual-Band DC-HSDPA
DC-HSDPA FG
Dual-Band DC-HSDPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-1382
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether Dual-Cell
HS-DSCH (Single-Band or Dual-Band) is supported, depending on

whether the Dual-Cell HS-DSCH function is enabled.
Related factor: whether the Dual-Cell HS-DSCH (Single-Band or
Dual-Band) function is enabled.
Adjustment suggestion: This parameter is the RNC-level switch for
the Dual-Cell HS-DSCH function, and it is nonadjustable.
It is a function switch and the function is disabled by default.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.23 Power Offset Relative to E-HICH in Single Link Condition for

E-HICH of Serving RLS in Macro Diversity Condition (2ms TTI)
Full Name
Power Offset Relative to E-HICH in Single Link Condition for E-HICH

of Serving RLS in Macro Diversity Condition (2ms TTI)
Abbreviated Name
poEhichSerRls2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power offset of the E-HICH (TTI = 2

ms) on the serving RLS relative to the E-HICH (TTI = 2 ms) on a
single link, in the case of macro diversity.
Instance
RNC
ZWF25-04-006
2-1383
SJ-20141209142030-013|2015-11-12 (R1.3)
(-63.75 .. +63.75)dB, step 0.25dB
Unit
dB
Default Value
7dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
E-HICH (TTI = 2 ms) on the serving RLS relative to the E-HICH (TTI
= 2 ms) on a single link, in the case of macro diversity.
Related factors: This parameter must be configured to ensure
that the transmit power of the serving RLS E-HICH (TTI = 2 ms)
is sufficient to meet the minimum requirement of the E-HICH
(According to the 3Gpp 25.101 protocol, MISS ACK should be equal
to or smaller than 5%). System capacity should also be considered.
If the parameter value is too small, the minimum E-HICH
performance requirement cannot be satisfied.
If the parameter value is too large, it will result in power waste and
affect system capacity.
The default value of this parameter meets the minimum E-HICH
Reason
performance requirement described in the 3Gpp 25.101 protocol

and meets the system capacity requirement.
Change Take Effect
Ongoing Connection(at soft handover happen)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1384
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.24 Power Offset Relative to E-HICH in Single Link Condition

for E-HICH of Serving RLS in Macro Diversity Condition (10ms
TTI)
Full Name

of Serving RLS in Macro Diversity Condition (10ms TTI)
Abbreviated Name
poEhichSerRls10
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power offset of the E-HICH (TTI= 10

ms) on the serving RLS relative to the E-HICH (TTI= 10 ms) on a
Instance
RNC
ZWF25-04-006
(-63.75 .. +63.75)dB, step 0.25dB
Unit
dB
Default Value
7dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1385
SJ-20141209142030-013|2015-11-12 (R1.3)
E-HICH (TTI = 10 ms) on the serving RLS relative to the E-HICH

(TTI = 10 ms) on a single link, in the case of macro diversity.
that the transmit power of the serving RLS E-HICH (TTI = 10
ms) is sufficient to meet the minimum requirement of the E-HICH
(According to the 3Gpp 25.101 protocol, MISS ACK should be equal
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

for E-HICH of Non-serving RLS in Macro Diversity Condition
(2ms TTI)
Full Name

of Non-serving RLS in Macro Diversity Condition (2ms TTI)
Abbreviated Name
poEhichNoSerRl2
Managed Object
3GPP Name
N/A
2-1386
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description

ms) on the non-serving RLS relative to the E-HICH (TTI = 2 ms) on
a single link, in the case of macro diversity.
Instance
RNC
ZWF25-04-006
(-63.75 .. +63.75)dB, step 0.25dB
Unit
dB
Default Value
8dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
E-HICH (TTI = 2 ms) on the non-serving RLS relative to the E-HICH

Related factors: This parameter must be configured to ensure that
the transmit power of the non-serving RLS E-HICH (TTI = 2 ms) is
sufficient to meet the minimum requirement (According to the 3Gpp
25.101 protocol, MISS ACK should be equal to or smaller than 5%).
System capacity should also be considered.
Reason

Change Take Effect
Ongoing Connection(at next radio link addition request or next radio

link re-configuration request and soft handover happen.)
No
0
2-1387
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

for E-HICH of Non-serving RLS in Macro Diversity Condition
(10ms TTI)
Full Name

of Non-serving RLS in Macro Diversity Condition (10ms TTI)
Abbreviated Name
poEhichNoSerRl10
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

ms) on the non-serving RLS relative to the E-HICH (TTI = 10 ms) on
Instance
RNC
ZWF25-04-006
(-63.75 .. +63.75)dB, step 0.25dB
Unit
dB
Default Value
8dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
2-1388
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
the E-HICH (TTI = 10 ms) on the non-serving RLS relative to the

E-HICH (TTI = 10 ms) on a single link, in the case of macro diversity.
the transmit power of the non-serving RLS E-HICH (TTI = 10 ms) is
sufficient to meet the minimum requirement (According to the 3Gpp
25.101 protocol, MISS ACK should be equal to or smaller than 5%).
System capacity should also be considered.
Reason

Change Take Effect

No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.27 Power Offset Relative to E-RGCH in Single Link Condition

for E-RGCH of Serving RLS in Macro Diversity Condition
(2ms TTI)
Full Name
Power Offset Relative to E-RGCH in Single Link Condition for

E-RGCH of Serving RLS in Macro Diversity Condition (2ms TTI)
Abbreviated Name
poErgchSerRls2
Managed Object
2-1389
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power offset of the E-RGCH (TTI = 2

ms) on the serving RLS relative to the E-RGCH (TTI = 2 ms) on a
Instance
RNC
ZWF25-04-006
(-63.75 .. +63.75)dB, step 0.25dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
E-RGCH (TTI = 2 ms) on the serving RLS relative to the E-RGCH

that the transmit power of the serving RLS E-RGCH (TTI = 2 ms)
is sufficient to meet the minimum requirement of the E-RGCH
(According to the 3Gpp 25.101 protocol, MISS UP should be equal
If the parameter value is too small, the minimum E-RGCH
The default value of this parameter meets the minimum E-RGCH
Reason

Change Take Effect
No
2-1390
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.28 Power Offset Relative to E-RGCH in Single Link Condition

for E-RGCH of Serving RLS in Macro Diversity Condition
(10ms TTI)
Full Name
Power Offset Relative to E-RGCH in Single Link Condition for

E-RGCH of Serving RLS in Macro Diversity Condition (10ms TTI)
Abbreviated Name
poErgchSerRls10
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power offset of the E-RGCH (TTI = 10

ms) on the serving RLS relative to the E-RGCH (TTI = 10 ms) on
Instance
RNC
ZWF25-04-006
(-63.75 .. +63.75)dB, step 0.25dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
2-1391
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
E-RGCH (TTI = 10 ms) on the serving RLS relative to the E-RGCH

that the transmit power of the serving RLS E-RGCH (TTI = 10
ms) is sufficient to meet the minimum requirement of the E-RGCH
(According to the 3Gpp 25.101 protocol, MISS UP should be equal
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.29 Power Offset Relative to 10ms TTI E-RGCH in Single Link

Condition for E-RGCH of Non-serving RLS in Macro Diversity
Condition
Full Name
Power Offset Relative to 10ms TTI E-RGCH in Single Link Condition

for E-RGCH of Non-serving RLS in Macro Diversity Condition
Abbreviated Name
poErgchNonSerRls
Managed Object
2-1392
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power offset of the E-RGCH on the

non-serving RLS relative to the E-RGCH (TTI = 10 ms) on a single
link, in the case of macro diversity.
Instance
RNC
ZWF25-04-006
(-63.75 .. +63.75)dB, step 0.25dB
Unit
dB
Default Value
6dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
E-RGCH on the non-serving RLS relative to the E-RGCH (TTI = 10

ms) on a single link, in the case of macro diversity.
the transmit power of the non-serving E-RGCH is sufficient to meet
the minimum requirement of the E-RGCH (According to the 3Gpp
25.101 protocol, MISS DOWN should be equal to or smaller than
5%). System capacity should also be considered.
Reason

Change Take Effect

No
2-1393
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.30 Dynamic Updating Switch of E-AGCH Power Offset

Full Name
Dynamic Updating Switch of E-AGCH Power Offset
Abbreviated Name
eagchPOUptSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to dynamically adjust the power

offset of the E-AGCH.
Instance
RNC
N/A
N/A
0: Off (Not Need Dynamic Adjustment)

1: On (Need Dynamic Adjustment)
Unit
N/A
Default Value
Off (Not Need Dynamic Adjustment)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
2-1394
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether to
dynamically adjust the power offset of the E-AGCH.

Related factors: HSUPA service quality, system capacity, and
Iub-interface reconfiguration
If this function is enabled, in the case of a single link, the E-AGCH
Power Offset is eagchPOTti2 (TTI = 2 ms) or eagchPOTti10 (TTI
= 10 ms); however, in the case of the DCH macro diversity, the
E-AGCH Power Offset is eagchPOTti2 (TTI = 2 ms) + MacroDivGain
or eagchPOTti10 (TTI = 10 ms) + MacroDivGain. This can gurantee
service quality and optimize system capacity. MacroDivGain is the
macro diversity gain of the downlink dedicated channel, whose
value is 0dB.
If this function is disabled, the E-AGCH Power Offset is eagchPOTti2
(TTI = 2 ms) or eagchPOTti10 (TTI = 10 ms), regardless of whether
it is in the case of a single link or in the DCH macro diversity. This
can eliminate the Iub-interface reconfiguration.
If the E-AGCH Power Offset is not adjusted, it can eliminate the
Reason
Iub-interface reconfiguration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.31 HSUPA Control Channel (E-AGCH, E-RGCH/E-HICH)

Number Update Period
Full Name
HSUPA Control Channel (E-AGCH, E-RGCH/E-HICH) Number

Update Period
Abbreviated Name
hsupaCtrChUptPrd
Managed Object
2-1395
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period for determining whether to

adjust the number of E-AGCHs and E-RGCHs/E-HICHs.
Instance
RNC
ZWF25-04-007
Code Allocation for HSUPA
(6..65532)s, step 6s
Unit
Default Value
12s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the period for determining whether to
adjust the number of E-AGCHs and E-RGCHs/E-HICHs.

Configuration rule:
This parameter should be configured based on the changes in the
amount of HSUPA services (for example, through the corresponding
counter observing the number of HSUPA services for which
requests are admitted within a period of time), so that the changes
in the number of E-AGCHs and E-RGCHs/E-HICHs meet the
requirements of HSUPA users.
If the parameter is set too large, the number of E-AGCHs and
E-RGCHs/E-HICHs cannot be adjusted in time, leading to a limit to
the capacity of HSUPA users.
If the value is too small, the system frequently determines whether
E-AGCHs and E-RGCHs/E-HICHs need to be adjusted. Excessive
system resources (such as CPU) are consumed.
A 12-second interval can satisfy the HSUPA service requirement and
Reason
avoid adjusting the number of E-AGCHs and E-RGCHs/E-HICHs

frequently.
Change Take Effect
No
2-1396
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.32 Indicator for Whether to Judge Event 1F Condition When

the Service is Setup on HSPA
Full Name
Indicator for Whether to Judge Event 1F Condition When the Service

is Setup on HSPA
Abbreviated Name
event1fHsInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to judge event 1F condition when

the service is setup on HSPA.
Instance
RNC
ZWF23-01-A
ZWF25-01-A
ZWF23-01-041
ZWF26-01-010

Enhanced F-DPCH
Enhanced F-DPCH FG
0: False
1: True
2-1397
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates whether to check the 1F event when
the service is established on HSPA.

If the switch is on, the system decides whether to establish the
service on the HS-DSCH/E-DCH based on the channel quality.
However, the number of unnecessary channel transitions may
increase due to changes of the channel quality.
If the switch is off, as long as both the UE and the cell
support HS-DSCH/E-DCH, the service can be created on the
HS-DSCH/E-DCH. In this case, the number of unnecessary channel
transitions will not increase.
Based on the field experience, the recommended configuration is
0, which means that the 1F event will not be checked to reduce the
number of channel transitions.
The default value is set to reduce the times of channel transitions.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1398
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.33 Quantified E-DPCCH/DPCCH Power Offset (10ms TTI)

Full Name
Quantified E-DPCCH/DPCCH Power Offset (10ms TTI)
Abbreviated Name
edpcchPOTti10
Managed Object
3GPP Name
E-DPCCH/DPCCH power offset; E-DPCCH Power Offset
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the quantified E-DPCCH/DPCCH power

offset configured for the 10 ms E-DCH transmission time interval.
Instance
RNC
ZWF25-04-006
0..8
Unit
N/A
Default Value
Related Parameters
edpcchPOTti2
edpcchPOTti2 > edpcchPOTti10
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the quantified
E-DPCCH/DPCCH power offset configured for the 10ms E-TTI.

Related factors: The parameter value should ensure that the missed
detection rate is less than 0.2 percent and avoid unnecessary power
waste.
If the parameter value is too large, the E-DPCCH transmit power
is too large and the missed detection rate is small. However,
unnecessary interference is generated and the system capacity
is reduced.
2-1399
SJ-20141209142030-013|2015-11-12 (R1.3)
If the parameter value is too small, the E-DPCCH transmit power is

too small and the missed detection rate is too large, which cannot
be satisfy service quality requirements.
The default value of this parameter meets the requirements that
Reason
the missed detection rate is smaller than 0.2% and minimum

interference is generated.
Change Take Effect
Ongoing Connection(at next Radio Link Setup Request or next

Radio Link Addition Request or next Radio Link Re-configuration
Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
edpcchPOTti2
Managed Object
3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

offset configured for the 2 ms E-DCH transmission time interval.
Instance
RNC
ZWF25-04-006
2-1400
SJ-20141209142030-013|2015-11-12 (R1.3)
0..8
Unit
N/A
Default Value
Related Parameters
edpcchPOTti10
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
E-DPCCH/DPCCH power offset configured for the 2 ms E-TTI.

Related factors: The parameter value should ensure that the missed
detection rate is less than 0.2 percent and avoid unnecessary power
waste.
If the parameter value is too large, the E-DPCCH transmit power
is too large and the missed detection rate is small. However,
unnecessary interference is generated and the system capacity
is reduced.
If the parameter value is too small, the E-DPCCH transmit power is
too small and the missed detection rate is too large, which cannot
be satisfy service quality requirements.
The default value of this parameter meets the requirements that
Reason
the missed detection rate is smaller than 0.2% and minimum

interference is generated.
Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1401
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.35 Power Offset for Scheduling Info (2ms TTI)

Full Name
Power Offset for Scheduling Info (2ms TTI)
Abbreviated Name
scheInfoPOTti2
Managed Object
3GPP Name
E-DCH Power Offset for Scheduling Info; Power Offset for

Scheduling Info
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the scheduling information power offset

configured for 2 ms E-TTI. When no MACd PDUs are included in the
same MACe PDU, a UE uses the configured scheduling information
power offset as the HARQ power offset to calculate the E-DPDCH
transmit power.
Instance
RNC
ZWF25-04-006
0..6
Unit
N/A
Default Value
Related Parameters
scheInfoPOTti10
scheInfoPOTti2 >= scheInfoPOTti10
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1402
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the scheduling
information power offset configured for 2 ms E-TTI.

Related factors: This parameter is used to ensure that the 2 ms
TTI scheduling information is demodulated correctly, and to avoid
unnecessary power waste.
If the parameter value is too large, power is wasted and the system
capacity is reduced.
If the parameter value is too small, the scheduling information is not
correctly demodulated and the service quality is affected.
System capacity and service quality are considered.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
scheInfoPOTti10
Managed Object
3GPP Name

Scheduling Info
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the scheduling information power offset

configured for 10 ms E-TTI. When no MACd PDUs are included
in the same MACe PDU, a UE uses the configured scheduling
information power offset as the HARQ power offset to calculate the
E-DPDCH transmit power.
2-1403
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF25-04-006
0..6
Unit
N/A
Default Value
Related Parameters
scheInfoPOTti2
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the scheduling
information power offset configured for 10 ms E-TTI.

Related factors: This parameter is used to ensure that the 10 ms
TTI scheduling information is demodulated correctly, and to avoid
unnecessary power waste.
If the parameter value is too large, power is wasted and the system
capacity is reduced.
If the parameter value is too small, the scheduling information is not
correctly demodulated and the service quality is affected.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1404
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.37 HS-DPCCH ACK Power Offset for Single Radio Link or

Intra-NodeB Handover
Full Name
HS-DPCCH ACK Power Offset for Single Radio Link or Intra-NodeB

Handover
Abbreviated Name
ackPwrOffset
Managed Object
3GPP Name
ACK Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset of the HS-DPCCH ACK

field relative to the DPCCH, when the UE has a single link or is in
the intraNode B handover status.
Instance
RNC
ZWF23-04-005
Power Allocation for HSDPA
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1405
SJ-20141209142030-013|2015-11-12 (R1.3)
HS-DPCCH ACK field relative to the DPCCH, when the UE has a

single link or is in the intraNode B handover status.
Related factors: The parameter value should satisfy the requirement
for the correct reception rate and system capacity.
If the parameter value is too large, the uplink power is wasted,
the uplink interference is increased, and the uplink cell capacity
is reduced.
If the parameter value is too small, the receiving quality of the
HS-DPCCH ACK field is affected.
The default value meets the requirements that the ACK error rate P
Reason
(Ack->Nack/Dtx) is smaller than 1 percent and the uplink interference

is small. P (Ack->Nack/Dtx) = (UE_ack-NodeB_ack)/UE_ack,
where UE_ack is the number of ACKs transmitted by UEs in the
HS-DPCCHl and NodeB_ack is the number of ACKs decoded by
the Node B.
Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.38 ACK-NACK Repetition Factor

Full Name
ACK-NACK Repetition Factor
Abbreviated Name
anackRepFactor
Managed Object
3GPP Name
2-1406
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the ACK-NACK repetition factor, which is

the number of consecutive repetitions of the same ACK-NACK.
Instance
RNC
ZWF23-04-005
1..4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the ACK-NACK
repetition factor, which means the number of consecutive repetitions

of ACK and NACK.
Related factors: system capacity and service quality.
If the parameter value is too large, new data's ACK and NACK
that are fed back to the network is reduced and system capacity
is affected.
If the parameter value is too small, the probability of ACK and NACK
being decoded correctly is small and service quality is affected.
Reason
Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
2-1407
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.44.39 HS-DPCCH NACK Power Offset for Single Radio Link or

Full Name
HS-DPCCH NACK Power Offset for Single Radio Link or

Abbreviated Name
nackPwrOffset
Managed Object
3GPP Name
NACK Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset configuration of the

HS-DPCCH NACK field when the UE has a single link or is in the
intraNode B handover status. It is a power offset relative to the
DPCCH.
Instance
RNC
ZWF23-04-005
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1408
SJ-20141209142030-013|2015-11-12 (R1.3)
HS-DPCCH NACK field relative to the DPCCH, when the UE has a

is reduced.
HS-DPCCH NACK field is affected.
Reason

the Node B.
Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.40 CQI Feedback Cycle

Full Name
CQI Feedback Cycle
Abbreviated Name
cqiCycle
Managed Object
3GPP Name
CQI Feedback Cycle k
2-1409
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the CQI feedback cycle, and is used to

determine the time to send a CQI. The value 0 indicates that the UE
does not perform channel quality feedback.
This parameter is a 3-tuple. The elements in this array are used
in different load levels. The corresponding relations between the
elements and load levels are as follows:
Element 1: low load.
Element 2: medium load.
Element 3: high load.
The preceding load includes both uplink load and the number of
HSDPA users.
Instance
RNC
ZWF23-01-015
(0[0], 2[1], 4[2], 8[3], 10[4], 20[5], 40[6], 80[7], 160[8], 16[9], 32[10],
64[11]) ms
Unit
ms
Default Value
[2, 8, 8]ms
Related Parameters
DtxDrx: : dtxCyc2Tti10, DtxDrx: : dtxCyc2Tti2, CqiRepFactor
1. If cqiCycle[0] is not 0, the physical value of cqiCycle[0] is greater
Parameters
than or equal to the double of cqiRepFactor[0].

4. cqiCycle[0]<= cqiCycle[1] <= cqiCycle[2].
Data Type
long[3]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1410
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the CQI feedback
cycle.
Related factors: impact of a feedback cycle on downlink throughput
and uplink interference.
CQI Feedback Cycle and CQI Repetition Factor determine the
feedback time of the same CQI.
If the parameter value is too large, a UE sends a new CQI after
a long cycle, the accuracy of HSDPA scheduling is reduced, and
downlink throughput is affected.
If the parameter value is too small, the CQI is more likely to reflect
the actual channel quality, and HSDPA scheduling is more accurate.
However, more uplink interference is generated accordingly.
Downlink throughput and uplink interference are considered.
Reason
Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.41 HS-DPCCH CQI Power Offset for Single Radio Link or

Full Name
HS-DPCCH CQI Power Offset for Single Radio Link or Intra-NodeB

Handover
Abbreviated Name
cqiPwrOffset
Managed Object
3GPP Name
CQI Power Offset
2-1411
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.433
Description

HS-DPCCH CQI field when the UE has a single link or is in the
intraNode B handover status. It is a power offset relative to the
DPCCH.
Instance
RNC
ZWF23-04-005
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
HS-DPCCH CQI field relative to the DPCCH, when the UE has a

Related factors: The parameter value should ensure that the
HS-DPCCH CQI information can be received correctly, and should
avoid unnecessary power waste.
The parameter value should satisfy the requirements for the correct
reception probability, coverage, and system capacity.
If the parameter value is too large, more interference is generated
and system capacity is reduced.
If the parameter value is too small, the reception quality is bad.
The default parameter value should satisfy the requirements for the
Reason
correct reception probability, coverage, and system capacity.
Change Take Effect

Request)
No
2-1412
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.42 CQI Repetition Factor

Full Name
CQI Repetition Factor
Abbreviated Name
cqiRepFactor
Managed Object
3GPP Name
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the CQI repetition factor, which is the

number of consecutive repetitions of the same CQI.
This parameter is a 3-tuple. The elements in this array are used in
different load conditions. The corresponding relationships between
the elements and load levels are as follows:
Element 1: low load
Element 2: medium load
Element 3: high load
HSDPA users.
Instance
RNC
ZWF23-01-015
1..4
Unit
N/A
Default Value
[1 1 1]
Related Parameters
cqiCycle
2-1413
SJ-20141209142030-013|2015-11-12 (R1.3)
1. When cqiCycle[0] is not 0, the physical value of cqiCycle[0] >= 2
Parameters
* cqiRepFactor[0].
* cqiRepFactor[1].
* cqiRepFactor[2].
Data Type
long[3]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the CQI repetition
factor.
Related factors: the impact on HSDPA service quality.
response time of the same CQI.
HSDPA service quality is affected.
If the parameter value is too small, the probability of CQI being
decoded correctly is small and the HSDPA service quality is affected.
This default value satisfies the requirement for the HSDPA service
Reason
quality.
Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.43 E-DCH Reference Power Offset

2-1414
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
E-DCH Reference Power Offset
Abbreviated Name
edchRefPO
Managed Object
3GPP Name
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the E-DCH reference power offset, which

is used to estimate the E-DPDCH power of E-TFCI without decoding
MAC-e PDUs.
Instance
RNC
ZWF25-04-006
0..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the E-DCH reference
power offset. It is used to estimate the uplink load increase caused

by the MAC-e PDUs that are not decoded.
If the parameter value is large, the calculated E-DPDCH transmit
power is large and the system capacity is small.
If the parameter value is small, the calculated E-DPDCH transmit
power is small and the service quality is bad.
Reason
Change Take Effect

Request)
2-1415
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.44 TPC Command Error Rate Target

Full Name
TPC Command Error Rate Target
Abbreviated Name
tpcErrTarget
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the F-DPCH TPC command error rate

target, and is used to adjust the SIR target of the F-DPCH.
Instance
RNC
ZWF23-01-041

Enhanced F-DPCH
(0.01..0.1), step 0.01
Unit
N/A
Default Value
.05
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
2-1416
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: This parameter is the F-DPCH TPC error rate
used for F-DPCH OLPC.

Related factors: uplink channel quality and system downlink
capacity.
If the parameter value is too large, the TPC error rate on F-DPCH
increases greatly and uplink channel quality is affected.
If the parameter value is too small, the transmission power of
F-DPCH increases greatly and downlink system capacity is affected.
Uplink channel quality and downlink system capacity are considered.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.45 HSDPA Associate CM Method

Full Name
HSDPA Associate CM Method
Abbreviated Name
hsdpaCmAssoMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1417
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the method to associate HSDPA with

the compression mode. When the parameter is set to Serial, it
means that the compression mode is not supported when HSDPA
is used. In this case, the compression mode can be enabled only
when HS-DSCH falls back to DCH. When the parameter is set to
Parallel, it means that the compression mode is supported when
HSDPA is used.
Instance
RNC
ZWF23-01-A
0: Serial
1: Parallel
Unit
N/A
Default Value
Parallel
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicator of whether HSDPA and the
compression mode can be used simultaneously

Related factors: cell capability, UE capability, and HSDPA
throughput
When this parameter is set to "Serial", HSDPA and the compression
mode cannot be used simultaneously. HS-DSCH needs to fall back
to DCH before the compression mode can be enabled, which has
an impact on HSDPA throughput.
When this parameter is set to "Parallel", HSDPA and the
compression mode can be used simultaneously.
Adjustment suggestion: Whether HSDPA and the compression
mode can be used simultaneously depends on the NodeB capability.
ZTE products support this capability. It is not suggested to adjust
this parameter.
The default parameter value is set based on cell capability, UE
Reason
capability, and HSDPA throughput.
Change Take Effect
2-1418
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.46 HSUPA Associate CM Method

Full Name
HSUPA Associate CM Method
Abbreviated Name
hsupaCmAssoMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the method to associate HSUPA with the

compression mode. When the parameter is set to Serial, it means
that the compression mode is not supported when HSUPA is used.
In this case, the compression mode can be enabled only when
E-DCH falls back to DCH. When the parameter is set to Parallel,
it means that the compression mode is supported when HSUPA
is used.
Instance
RNC
ZWF23-01-A
ZWF25-01-A

0: Serial
1: Parallel
Unit
N/A
2-1419
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
1: Parallel
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicator of whether HSUPA and the
compression mode can be used simultaneously

Related factors: cell capability, UE capability, and UE performance
When this parameter is set to "Serial", HSUPA and the compression
mode cannot be used simultaneously. EDCH needs to fall back to
DCH before the compression mode can be enabled, which has an
impact on HSUPA throughput.
When this parameter is set to "Parallel", HSUPA and the
compression mode can be used simultaneously.
The default parameter value is set based on cell capability, UE
Reason
capability, and HSUPA throughput.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.47 HS-DPCCH ACK Power Offset for Inter-NodeB Handover

Full Name
HS-DPCCH ACK Power Offset for Inter-NodeB Handover
Abbreviated Name
interAckPwrOfst
Managed Object
2-1420
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
ACK Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description

HS-DPCCH ACK field when the UE is in the interNode B handover
status. It is a power offset relative to the DPCCH.
Instance
RNC
ZWF23-04-005
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
HS-DPCCH ACK field relative to the DPCCH when UEs are in the
intraNode B handover status.
is reduced.
HS-DPCCH ACK field is affected.
Reason

the Node B.
Change Take Effect
Ongoing Connection(at next inter-NodeB handover)
2-1421
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.48 HS-DPCCH CQI Power Offset for Inter-NodeB Handover

Full Name
HS-DPCCH CQI Power Offset for Inter-NodeB Handover
Abbreviated Name
interCqiPwrOfst
Managed Object
3GPP Name
CQI Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description

HS-DPCCH CQI field when the UE is in the interNode B handover
status. It is a power offset relative to the DPCCH.
Instance
RNC
ZWF23-04-005
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-1422
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
HS-DPCCH CQI field relative to the DPCCH when UEs are in the
Related factors: The parameter value should ensure that the
HS-DPCCH CQI information can be received correctly, and should
avoid unnecessary power waste.
The parameter value should satisfy the requirements for the correct
reception probability, coverage, and system capacity.
If the parameter value is too large, more interference is generated
and system capacity is reduced.
If the parameter value is too small, the reception quality is bad.
The default parameter value should satisfy the requirements for the
Reason
correct reception probability, coverage, and system capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.49 HS-DPCCH NACK Power Offset for Inter-NodeB Handover

Full Name
HS-DPCCH NACK Power Offset for Inter-NodeB Handover
Abbreviated Name
interNackPwrOfst
Managed Object
3GPP Name
NACK Power Offset
3GPP Reference
TS 25.423;
TS 25.433
2-1423
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

HS-DPCCH NACK field when the UE is in the interNode B
handover status. It is a power offset relative to the DPCCH.
Instance
RNC
ZWF23-04-005
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
HS-DPCCH NACK field relative to the DPCCH when UEs are in the
is reduced.
HS-DPCCH NACK field is affected.
Reason

the Node B.
Change Take Effect
No
How to Impact
N/A
2-1424
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.44.50 Timer for Event 1D in HSPA or MBMS

Full Name
Timer for Event 1D in HSPA or MBMS
Abbreviated Name
t1d
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
For HSPA, this parameter indicates the minimum time interval

required for the change of HSPA serving cells or the transition
between the HS and DCH channels to avoid excessively frequent
HSPA serving cell changes or channel transitions.
For MBMS, this parameter indicates the minimum time interval
required for the change between two best MBMS cells due to the
1d event to avoid excessively frequent changes between the PTP
and PTM bearer types.
Instance
RNC
ZWF23-03-001
ZWF24-01-021
ZWF25-03-002
HS-DSCH serving cell change

MBMS Mobility
E-DCH Serving cell change inside Active Set
MBMS FG
(0..65535)s, step 1
Unit
Default Value
0s
Related Parameters
N/A
2-1425
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: minimum time interval required for HSPA
serving cell change.

Related factors: HSPA throughput, risk of the ping-pong effect
during handover
The greater the parameter value is, the more slowly the HSPA
serving cell changes, which has an impact on HSPA throughput. The
smaller the parameter value is, the more rapidly the HSPA serving
cell changes, which may lead to ping-pong handover of HSPA
serving cells and also have an impact on the system performance.
Adjustment suggestion: When a UE is in the high-mobility state, this
parameter should be set to a small value to ensure user experience
and avoid call drop.
The default parameter value is set based on HS throughput, risk of
Reason
the ping-pong effect of the serving HSPA cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.51 Code Update Period Unit to update the HS-PDSCH number

based on code occupation ratio
Full Name
Code Update Period Unit to update the HS-PDSCH number based

on code occupation ratio
2-1426
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
codeUptPrdUnit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the unit of time period to judge whether the
code occupation ratio satisfies the criteria to adjust the HS-PDSCH
number based on code occupation ratio.
Instance
RNC
ZWF23-04-006
0: ms
1: s
Unit
N/A
Default Value
1: s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: The parameter indicates the time unit of CodeUptPrd.
It is enough to change the HS-PDSCH number on a second level.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1427
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.44.52 Period 1 (millisecond) to update the HS-PDSCH number

based on code occupation ratio
Full Name
Period 1 (millisecond) to update the HS-PDSCH number based on

code occupation ratio
Abbreviated Name
codeUptPrdms
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time period to judge whether the

Instance
RNC
ZWF23-04-006
(100..60000)ms, step 100ms
Unit
ms
Default Value
2000ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1428
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: The parameter indicates the period in ms to judge whether
to adjust the HS-PDSCH number.

Configuration Rule:
If it is too long, the HS-PDSCH number cannot be adjusted in time.
If it is too short, frequent HS-PDSCH number adjustment will take
too much system resource such as CPU.
2 second can satisfy the HSDPA service throughput requirement
Reason
and will not change the HS-PDSCH number too frequently.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.53 Period 2 (second) to update the HS-PDSCH number based

on code occupation ratio
Full Name
Period 2 (second) to update the HS-PDSCH number based on code

occupation ratio
Abbreviated Name
codeUptPrds
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time period to judge whether the

Instance
RNC
ZWF23-04-006
2-1429
SJ-20141209142030-013|2015-11-12 (R1.3)
(1..65535)s, step 1s
Unit
Default Value
2s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: The parameter indicates the period in second to judge
whether to adjust the HS-PDSCH number.

Configuration Rule:
If it is too long, the HS-PDSCH number cannot be adjusted in time.
If it is too short, frequent HS-PDSCH number adjustment will take
too much system resource such as CPU.
2 second can satisfy the HSDPA service throughput requirement
Reason
and will not change the HS-PDSCH number too frequently.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.54 HSPA Total Downlink Power Allocation Method

Full Name
HSPA Total Downlink Power Allocation Method
Abbreviated Name
hsdschTotPwrMeth
Managed Object
2-1430
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the allocation method for HS-PDSCH

and HS-SCCH Total Power (when HSUPA is not supported) or
HS-PDSCH, HS-SCCH, E-AGCH, E-RGCH and E-HICH Total
Power (when HSUPA is supported). There are two methods:
1. RNC dynamic assignment method: The RNC dynamically adjusts
the HSPA total downlink power based on such factors as power
balance, power congestion and overload. The HSPA total downlink
power configured in OMCR is only an initial value.
2. Node B assignment method: The RNC does not send the
configuration of the HSPA total downlink power to Node B. Node B
allocates the power freely.
Instance
RNC
ZWF23-04-005
ZWF23-04-007

Congestion Control Strategy for HSDPA
1: RNC Dynamic Assigning Mode

2: NodeB Assigning Mode
Unit
N/A
Default Value
2: NodeB Assigning Mode
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the allocation method
for the HSPA total power.

Related factors:
The RNC dynamic assignment mode is a method of assigning
HSDPA total power by the RNC instead of Node B.
The Node B assignment mode can make full use of the power
resource.
2-1431
SJ-20141209142030-013|2015-11-12 (R1.3)
The Node B assignment mode can make full use of the power
Reason
resource.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.55 Maximum Bit Rate of HSDPA Across Iur Interface

Full Name
Maximum Bit Rate of HSDPA Across Iur Interface
Abbreviated Name
hsdpaIurMBR
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate of HS-DSCH across

Iur interface. This parameter is used by DRNC to adjust code
resource.If serving cell is at the DRNC side, this parameter can be
used in flow control in Iub interface.
Instance
RNC
ZWF23-01-A
Unit
kbps
Default Value
3650
Related Parameters
N/A
2-1432
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum allowed bit rate of the
HSDPA service through the Iur Interface.

The maximum bit rate of HSDPA traffic is not transmitted over the
Iur interface. This parameter is used to calculate available code
resources of the HS-PDSCH.
maximum bit rate of HSDPA traffic is faster, which improves the
HSDPA user experience, but affects the R99 user experience.
If this parameter is set to a smaller value, the maximum bit rate of
HSDPA traffic is slower, which affects the HSDPA user experience,
but improves the HSDPA user experience.
The default value is set based on R99 and HSPA user experience.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.56 HS-DPCCH ACK Power Offset for Macro-Micro Handover

Full Name
HS-DPCCH ACK Power Offset for Macro-Micro Handover
Abbreviated Name
interMacMicAckPO
Managed Object
2-1433
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
ACK Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset of the HS-DPCCH ACK

field relative to the DPCCH when the UE is in a Macro-Micro
handover and the serving HS-DSCH cell is a macro cell.
Instance
RNC
ZWF23-04-005
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
HS-DPCCH ACK field relative to the DPCCH when the UE is in a

Macro-Micro handover and the serving HS-DSCH cell is a macro
cell.
Related factor: Both the specified successful receiving ratio and the
system capacity should be considered.
If the setting is too large, the uplink power may be wasted, the
uplink interference is increased, and the uplink capacity of the cell
is reduced.
If the setting is too small, the receiving quality of the HS-DPCCH
ACK field is affected.
The default setting is based on the correct receiving probability,
Reason
coverage, and the system capacity.
Change Take Effect
Ongoing Connection(at next Macro-Micro handover)
No
2-1434
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.57 HS-DPCCH NACK Power Offset for Macro-Micro Handover

Full Name
HS-DPCCH NACK Power Offset for Macro-Micro Handover
Abbreviated Name
interMacMicNackPO
Managed Object
3GPP Name
NACK Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset of the HS-DPCCH NACK

Instance
RNC
ZWF23-04-005
0..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1435
SJ-20141209142030-013|2015-11-12 (R1.3)
HS-DPCCH NACK field relative to the DPCCH when the UE is in a

cell.
Related factor: Both the specified successful receiving ratio and the
system capacity should be considered.
is reduced.
NACK field is affected.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.58 HS-DPCCH CQI Power Offset for Macro-Micro Handover

Full Name
HS-DPCCH CQI Power Offset for Macro-Micro Handover
Abbreviated Name
interMacMicCqiPO
Managed Object
3GPP Name
CQI Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset of the HS-DPCCH CQI

2-1436
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF23-04-005
0..10
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
HS-DPCCH CQI field relative to the DPCCH when the UE is in a

cell.
Related factor: specified successful receiving ratio and the system
capacity.
is reduced.
CQI field is affected.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1437
SJ-20141209142030-013|2015-11-12 (R1.3)
2.44.59 Range of DPCH/F-DPCH timing

Full Name
Range of DPCH/F-DPCH timing
Abbreviated Name
rangeofDpchTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DPCH/F-DPCH timing range, meaning

that DPCH/F-DPCH timing is evenly located in the range of
(rangeofDpchTime-1)*256 chips from slots 0, 3, 6, 9, and 12.
Instance
RNC
ZWF25-01-035
HSUPA Scheduling based on HARQ Synchronization
HSUPA Scheduling based on HARQ Synchronization FG
1..10, step 1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the DPCH/F-DPCH
timing range, meaning that the DPCH/F-DPCH timing is evenly

located in the range of (rangeofDpchTime-1)*256 chips from slots
0, 3, 6, 9, and 12.
Related factors: throughput of the E-DCH, the downlink DPCH pilot
peak-to-average power ratio, and the code resource multiplexing
for the F-DPCH.
The larger the setting, the lower the downlink DPCH pilot
peak-to-average power ratio and higher code resource utilization for
the F-DPCH. However, the uplink interferences between E-DCH
users are greater, and the throughput of the E-DCH is lower.
2-1438
SJ-20141209142030-013|2015-11-12 (R1.3)
The smaller the setting, the higher the downlink DPCH pilot
peak-to-average power ratio and less code resource utilization for
the F-DPCH. However, the uplink interferences between E-DCH
users are smaller, and the throughput of the E-DCH is larger.
The default setting is based on the downlink DPCH pilot
Reason
peak-to-average power ratio and the F-DPCH code resource. If

the time offset of the 2ms TTI is within 512 chips, the TDM method
can be applied to the 2ms TTI.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.60 RNC DB-DC+MIMO Support Indicator

Full Name
RNC DB-DC+MIMO Support Indicator
Abbreviated Name
rncDbMimoSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RNC supports activating the

DB-DC and MIMO functions at the same time.
Instance
RNC
ZWF26-04-002
Combination of DB DC-HSDPA and MIMO
Combination of DB DC-HSDPA and MIMO FG
0: Not Supported
1: Supported
2-1439
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
1: Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether the RNC supports activating
the DC and MIMO functions at the same time.

Related factors: network deployment, HSDPA throughput of the UE.
If this parameter is set to "Supported", the RNC supports activating
the DC and MIMO functions at the same time during radio link setup
or reconfiguration to increase the HSDPA throughput of the UE.
The DcHsdschSptInd parameter indicates whether the RNC
supports the DC function, and the RncMIMOInd parameter indicates
whether the RNC supports the MIMO function. However, even if
both the two parameters are set to "Supported", this does not mean
that the MIMO and DC functions can be activated for a radio link
at the same time.
This is a License parameter. This parameter is set as required. The
Reason
default value is "Not Supported".
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.61 RNC DB-MC+MIMO Support Indicator

2-1440
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
RNC DB-MC+MIMO Support Indicator
Abbreviated Name
rncDbMcMimoSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

DB-MC and MIMO functions at the same time.
Instance
RNC
ZWF26-04-003
Combination of 4C-HSDPA and MIMO
Combination of 4C-HSDPA and MIMO FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
1: Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

at the same time.
2-1441
SJ-20141209142030-013|2015-11-12 (R1.3)
When the parameters for the RNC level and Cell level functions
Reason
exist at the same time, the parameter for the RNC level function
should be set to "Supported".
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.62 RNC SB-MC+MIMO Support Indicator

Full Name
RNC SB-MC+MIMO Support Indicator
Abbreviated Name
rncSbMcMimoSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

SB-MC and MIMO functions at the same time.
Instance
RNC
ZWF26-04-003
0: Not Supported
1: Supported
Unit
N/A
Default Value
1: Supported
Related Parameters
N/A
2-1442
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

at the same time.
When the parameters for the RNC level and Cell level functions
Reason
exist at the same time, the parameter for the RNC level function
should be set to "Supported".
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.63 RNC HSDPA Vs R99 Code Priority Indicator

Full Name
RNC HSDPA Vs R99 Code Priority Indicator
Abbreviated Name
rncHsR99CdPriInd
2-1443
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an RNC determines the priorities

of the HSDPA service and the R99 PS service during code resource
allocation for the services.
Instance
RNC
ZWF23-05-004
DCH/HSDPA Fairness
DCH/HSDPA Fairness FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
HsVsR99CdPriInd
HsVsR99CdPriInd can be set to "Supported" only when
Parameters
rncHsR99CdPriInd is set to "Supported".
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether to determine
priorities of the HSDPA and R99 services during code resource

allocation for the services.
Related factor: priority of the HSDPA service relative to that of the
R99 services.
If this parameter is set to "Supported", when the number of currently
used HS-PDSCHs is less than the code fairness threshold during the
adjustment of the number of HS-PDSCHs and the rate increasing of
the R99 services, the HSDPA service has a higher priority in using
the codes in the code tree.
If this parameter is set to "Not Supported" and the dynamic
adjustment range of HSDPA codes is met, the number of
HS-PDSCHs is reduced preferentially during the adjustment of the
number of HS-PDSCHs and the rate increasing of the R99 services.
Adjustment suggestion: This parameter can be set to "Supported" if
the operator values user experience of the HSDPA service.
2-1444
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.44.64 Switch Used to control DL DPCH Timing Adjustment

Full Name
Switch Used to control DL DPCH Timing Adjustment
Abbreviated Name
chip256adjust
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether DL DPCH timing adjustment (a

timing advance or delay of 256 chips) is allowed during radio link
reconfiguration from DPCH to F-DPCH or TDM-based E-DCH
scheduling for reconfiguration to HSUPA 2ms TTI.
Instance
RNC
ZWF25-01-035
ZWF23-01-041


0: No Adjust
1: Adjust
Unit
N/A
2-1445
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: No Adjust
Related Parameters
rncFdpchSupInd,
edchTdmSwch
Only when the rncFdpchSupInd or the edchTdmSwch is set to "1:
Parameters
On", the chip256adjust is valid.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is set to 0 (No Adjust) if some UEs cannot complete

DL DPCH timing adjustment to achieve a timing advance or
delay of 256 chips required by the network side during radio link
reconfiguration from DPCH to F-DPCH or TDM-based E-DCH
scheduling for reconfiguration to HSUPA 2ms TTI.
This parameter is set to 1 (Adjust) if no incompatible UE exists in the
network, to improve the code utilization of F-DPCH by adjusting 256
chips during radio link reconfiguration or increase the scheduling
probability of UEs during TDM-based E-DCH scheduling.
The default value is set to 0 on assumption that some UEs do not
Reason
support DL DPCH timing adjustment (timing advance or timing

delay) during radio link reconfiguration from DPCH to F-DPCH or
TDM-based E-DCH scheduling for reconfiguration to 2ms HSUPA.
Change Take Effect
Ongoing Connection(at next radio link reconfiguration)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2-1446
SJ-20141209142030-013|2015-11-12 (R1.3)
2.45 Common EDCH Configuration(UCommEdch)

2.45.1 Common EDCH Configuration Object ID
Full Name
Common EDCH Configuration Object ID
Abbreviated Name
UCommEdchId
Managed Object
Common EDCH Configuration(UCommEdch)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the common EDCH

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-1447
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Common EDCH Configuration
N/A
N/A

Full Name
Abbreviated Name
edpcchPOTti10
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.433
Description

offset configured for the Common E-DCH (TTI = 10 ms).
Instance
RNC
ZWF26-02-003
0..8
Unit
N/A
Default Value
Related Parameters
edpcchPOTti2
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1448
SJ-20141209142030-013|2015-11-12 (R1.3)
E-DPCCH/DPCCH power offset configured for the Common E-DCH

(TTI = 10 ms).
that the missed detection rate is smaller than 0.2% and avoid
unnecessary interference.
If the parameter value is too big, the E-DPCCH transmit power will
be too big. Although the missed detection rate will be very low,
unnecessary interference will be generated and system capacity
will be reduced.
If the parameter value is too small, the E-DPCCH transmit power
will be too small and the missed detection rate is too high, which
cannot satisfy service quality requirements.
The default value of this parameter can ensure that the missed
Reason
detection rate is smaller than 0.2% and minimum interference is

generated.
Change Take Effect
Yes
How to Impact
Physical shared channel reconfiguration will be triggered, and

SIB5/5bis will change.
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
edpcchPOTti2
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.433
2-1449
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

offset configured for the Common E-DCH (TTI = 2 ms).
Instance
RNC
ZWF26-02-003
0..8
Unit
N/A
Default Value
Related Parameters
edpcchPOTti10
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
E-DPCCH/DPCCH power offset configured for the Common E-DCH

(TTI = 2 ms).
that the missed detection rate is smaller than 0.2% and avoid
unnecessary interference.
If the parameter value is too big, the E-DPCCH transmit power will
be too big. Although the missed detection rate will be very low,
unnecessary interference will be generated and system capacity
will be reduced.
If the parameter value is too small, the E-DPCCH transmit power
will be too small and the missed detection rate is too high, which
cannot satisfy service quality requirements.
The default value of this parameter can ensure that the missed
Reason
detection rate is smaller than 0.2% and minimum interference is

generated.
Change Take Effect
Yes
How to Impact

2-1450
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
scheInfoPOTti2
Managed Object

3GPP Name

Scheduling Info
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the power offset for scheduling information

configured for Common E-DCH (TTI = 2 ms). When no MACd PDU
is contained in the MACe PDU, the UE calculates the E-DPDCH
transmit power using the power offset for scheduling information as
the HARQ power offset.
Instance
RNC
ZWF26-02-003
0..6
Unit
N/A
Default Value
Related Parameters
scheInfoPOTti10
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1451
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the power offset for
scheduling information configured for the Common E-DCH (TTI =

2 ms).
that the scheduling information (TTI = 2 ms) can be properly
demodulated and unnecessary power waste can be avoided.
If the parameter value is too big, it will cause unnecessary power
waste and reduce system capacity.
If the parameter value is too small, the scheduling information
cannot be properly demodulated and service quality is affected.
For the default value of this parameter, system capacity and service
Reason
quality are considered.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
scheInfoPOTti10
Managed Object

3GPP Name

Scheduling Info
3GPP Reference
TS 25.331;
TS 25.433
2-1452
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the power offset for scheduling information

configured for Common E-DCH (TTI = 10 ms). When no MACd PDU
is contained in the MACe PDU, the UE calculates the E-DPDCH
transmit power using the power offset for scheduling information as
the HARQ power offset.
Instance
RNC
ZWF26-02-003
0..6
Unit
N/A
Default Value
Related Parameters
scheInfoPOTti2
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the power offset for
scheduling information configured for the Common E-DCH (TTI =

10 ms).
that the scheduling information (TTI = 10 ms) can be properly
demodulated and unnecessary power waste can be avoided.
If the parameter value is too big, it will cause unnecessary power
waste and reduce system capacity.
If the parameter value is too small, the scheduling information
cannot be properly demodulated and service quality is affected.
Reason
Change Take Effect
Yes
How to Impact

2-1453
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.45.6 HS-DPCCH ACK Power Offset for Common E-DCH

Transmission
Full Name
HS-DPCCH ACK Power Offset for Common E-DCH Transmission
Abbreviated Name
ackPwrOffset
Managed Object

3GPP Name
ACK Power Offset
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the power offset of the HS-DPCCH

ACK field relative to the DPCCH during the Common E-DCH
transmission.
Instance
RNC
ZWF26-02-003
0..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1454
SJ-20141209142030-013|2015-11-12 (R1.3)
HS-DPCCH ACK field relative to the DPCCH during the Common

E-DCH transmission.
Related factors: This parameter must be configured to meet a
certain reception success rate and system capacity requirements.
If the parameter value is too big, it will cause power waste, generate
uplink interference, and reduce uplink cell capacity.
If the parameter value is too small, it will affect the reception quality
of the HS-DPCCH ACK field.
The default value of this parameter can achieve the ACK error
Reason
rate P (Ack->Nack/Dtx)<1%, in which P (Ack->Nack/Dtx) =

(UE_ack-NodeB_ack)/UE_ack). UE_ack represents the number
of ACKs sent from the UE through the HS-DPCCH. NodeB_ack
represents the number of ACKs demodulated on the NodeB side. In
addition, it will generate minimum uplink interference.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.7 ACK-NACK Repetition Factor

Full Name
Abbreviated Name
anackRepFactor
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.433
2-1455
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the ACK-NACK repetition factor during the

Common E-DCH transmission, which is the number of times for
consecutively transmitting the same ACK-NACK.
Instance
RNC
ZWF26-02-003
1..4
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the ACK/NACK
repetition factor during the Common E-DCH transmission.

If the number of the ACK and NACK retransmissions is too big,
it will reduce new ACKs and NACKs returned to the network and
If the number of the ACK and NACK retransmissions is too small, it
will reduce the probability of correctly demodulating the ACK/NACK
and affect system capacity.
Reason
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
2-1456
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.45.8 HS-DPCCH NACK Power Offset for Common E-DCH

Transmission
Full Name
HS-DPCCH NACK Power Offset for Common E-DCH Transmission
Abbreviated Name
nackPwrOffset
Managed Object

3GPP Name
NACK Power Offset
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the power offset of the HS-DPCCH

NACK field relative to the DPCCH during the Common E-DCH
transmission.
Instance
RNC
ZWF26-02-003
0..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1457
SJ-20141209142030-013|2015-11-12 (R1.3)
HS-DPCCH NACK field relative to the DPCCH during the Common

E-DCH transmission.
Related factors: This parameter must be configured to meet a
certain reception success rate and system capacity requirements.
If the parameter value is too big, it will cause power waste, generate
uplink interference, and reduce uplink cell capacity.
If the parameter value is too small, it will affect the reception quality
of the HS-DPCCH NACK field.
The default value of this parameter can achieve the ACK error
Reason
rate P (Ack->Nack/Dtx)<1%, in which P (Ack->Nack/Dtx) =

(UE_ack-NodeB_ack)/UE_ack). UE_ack represents the number
of ACKs sent from the UE through the HS-DPCCH. NodeB_ack
represents the number of ACKs demodulated on the NodeB side. In
addition, it will generate minimum uplink interference.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.9 CQI Feedback Cycle

Full Name
CQI Feedback Cycle
Abbreviated Name
cqiCycle
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.433
2-1458
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the CQI feedback cycle for common

E-DCH transmission. It determines the time of sending the CQI.
When the value is 0, the UE does not provide feedback about the
channel quality.
Instance
RNC
ZWF26-02-003
(0[0], 2[1], 4[2], 8[3], 10[4], 20[5], 40[6], 80[7], 160[8], 16[9], 32[10],
64[11]) ms
Unit
ms
Default Value
[2 10 20]ms
Related Parameters
CqiRepFactor
Parameters
* cqiRepFactor[0].
* cqiRepFactor[1].
* cqiRepFactor[2].
4. cqiCycle[0]<= cqiCycle[1] <= cqiCycle[2];
Data Type
long[3]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
cycle for common E-DCH transmission. The parameter is a 3-tuple,

and only the second element is valid for common E-DCH.
If the value is too high, the UE sends a new CQI after a long cycle,
which reduces the accuracy of HSDPA scheduling and affects
downlink throughput.
If the value is too low, the CQI is more likely to reflect the actual
channel quality, and HSDPA scheduling is more accurate. However,
more uplink interference is generated accordingly.
Reason
2-1459
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.10 HS-DPCCH CQI Power Offset for Common E-DCH

Transmission
Full Name
HS-DPCCH CQI Power Offset for Common E-DCH Transmission
Abbreviated Name
cqiPwrOffset
Managed Object

3GPP Name
CQI Power Offset
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the power offset of an HS-DPCCH CQI

field relative to DPCCH for common E-DCH transmission.
Instance
RNC
ZWF26-02-003
0..8
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-1460
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
an HS-DPCCH CQI field relative to DPCCH for common E-DCH

transmission.
Related factors: The parameter value makes sure that the
HS-DPCCH CQI field can be properly received and minimize power
consumption.
The parameter value must satisfy the requirements for the rated
receiving probability, coverage and system capacity.
If the value is too high, more uplink interference is generated and
the system capacity is reduced.
If the value is too low, the receiving quality is poor.
This default value satisfies the requirements for the rated receiving
Reason
probability, coverage and system capacity.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.11 CQI Repetition Factor

Full Name
Abbreviated Name
cqiRepFactor
Managed Object

3GPP Name

2-1461
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the CQI repetition factor for common

E-DCH transmission, meaning the number of consecutive repetitions
of one CQI.
Instance
RNC
ZWF26-02-003
1..4
Unit
N/A
Default Value
[1 1 1]
Related Parameters
cqiCycle
Parameters
* cqiRepFactor[0].
* cqiRepFactor[1].
* cqiRepFactor[2].
Data Type
long[3]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
factor for common E-DCH transmission. The parameter is a 3-tuple,

and only the second element is valid for common E-DCH
Related factors: impact of a CQI repetition factor on the service
quality of enhanced CELL_FACH
CQI Feedback Cycle and CQI. Repetition Factor determine the
If the value is too high, the UE sends a new CQI after a long cycle,
which reduces the accuracy of HSDPA scheduling and affects the
service quality of enhanced CELL_FACH.
If the value is too low, the probability of the CQI to be decoded
properly is small, and the service quality of enhanced CELL_FACH
is also affected.
This default value satisfies the requirement for enhanced
Reason
CELL_FACH service quality.
Change Take Effect
2-1462
SJ-20141209142030-013|2015-11-12 (R1.3)
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.12 E-DCH Reference Power Offset

Full Name
Abbreviated Name
edchRefPO
Managed Object

3GPP Name
3GPP Reference
TS 25.433
Description
This parameter indicates the common E-DCH reference power

offset, which is used to estimate the E-DPDCH power of E-TFCI
without decoding MAC-e PDUs.
Instance
RNC
ZWF26-02-003
0..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-1463
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the E-DCH reference
power offset. It is used to estimate the increased uplink loads

caused by the MAC-e PDUs which are not decoded.
With the rise of the value, the calculated E-DPDCH transmission
power increases and the system capacity decreases.
With the drop of the value, the calculated E-DPDCH transmission
power decreases and the service quality becomes worse.
Reason
Change Take Effect
Yes
How to Impact
Physical shared channel reconfiguration will be triggered
Access
Read/Write
OMC Access path
N/A
N/A
2.45.13 TPC Command Error Rate Target

Full Name
TPC Command Error Rate Target
Abbreviated Name
tpcErrTarget
Managed Object

3GPP Name
F-DPCH TPC command error rate target
3GPP Reference
TS 25.331
Description
This parameter indicates the F-DPCH TPC command error rate

target for common E-DCH transmission, and is used to adjust the
SIR target of F-DPCH.
Instance
RNC
2-1464
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF26-02-003
(0.01..0.1), step 0.01
Unit
N/A
Default Value
.05
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter is the F-DPCH TPC error rate
target for common E-DCH transmission.

Related factors: uplink channel quality and downlink system
capacity.
If the value is too high, the TPC error rate on F-DPCH increase
greatly, which affects uplink channel quality.
If the value is too low, the transmission power of F-DPCH increase
greatly, which affects downlink system capacity.
Uplink channel quality and downlink system capacity are considered.
Reason
Change Take Effect
No
How to Impact
SIB5/5bis will change
Access
Read/Write
OMC Access path
N/A
N/A
2-1465
SJ-20141209142030-013|2015-11-12 (R1.3)
2.45.14 Common E-DCH MAC-d Flow Multiplexing Switch

Full Name
Common E-DCH MAC-d Flow Multiplexing Switch
Abbreviated Name
cEdchMultiSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the MAC-d flow carrying DTCH

and the MAC-d flow carrying DCCH are allowed to be multiplexed in
the same MAC-i PDU when common E-DCH is used.
Instance
RNC
ZWF26-02-003
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates whether the MAC-d flow carrying
DTCH and the MAC-d flow carrying DCCH are allowed to be

multiplexed in the same MAC-i PDU when common E-DCH is used.
Configuration Rule: Considering the rate of the DTCH data and
uplink interference.
If DTCH and DCCH are allowed to be in one MAC-i PDU, DTCH can
be sent out more quick, at the expense of more uplink interference.
If DTCH and DCCH are not allowed to be in one MAC-i PDU, DTCH
can be sent out slower and less uplink interference is produced.
Considering the rate of the DTCH data and uplink interference.
Reason
2-1466
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Yes
How to Impact
Physical shared channel reconfiguration will be triggered and

Access
Read/Write
OMC Access path
N/A
N/A
2.45.15 Common E-DCH Transmission Time Interval

Full Name
Common E-DCH Transmission Time Interval
Abbreviated Name
ettiComEdch
Managed Object

3GPP Name
E-DCH Transmission Time Interval; E-TTI
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the common E-DCH transmission time

interval.
According to the specification there are two kind of E-TTI, which are
10ms and 2ms E-TTIs. 10ms E-TTI is mandatory and it should be
supported by all UEs and all cells which support E-DCH and 2ms
E-TTI is optional for cell, is mandatory for UE. When 2ms E-TTI
is supported by the capability of the Node B, the value of E-TTI
configured in the OMCR should be used, otherwise 10ms E-TTI
should be applied.
Instance
RNC
ZWF26-02-003
(2, 10)ms
2-1467
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
ms
Default Value
10ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the common E-DCH
transmission time interval used when Node B and UE both support

2ms E-TTI.
Configuration Rule: According to user throughput, delay and uplink
interference.
2ms E-TTI can provide higher user throughput or lower delay but can
bring more uplink interference. 10ms E-TTI can provide less user
throughput or higher delay but can bring less uplink interference.
According to user throughput, delay and uplink interference.
Reason
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.16 Logical Channel Type Indication for Common E-DCH

MAC-d Flow
Full Name
Logical Channel Type Indication for Common E-DCH MAC-d Flow
2-1468
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
ulLchTypeInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the logical channel type indicator for common

E-DCH MAC-d flow.
Instance
RNC
ZWF26-02-003
0: CCCH(CCCH)
1: DCCH(DCCH)
2: DTCH(DTCH)
Unit
N/A
Default Value
[0, 1, 2]
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_CEDCH_LOGICALCHANNEL]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
This parameter is the logical channel type indicator for common
E-DCH MAC-d flow.

Configuration Rule: This parameter is basic identification parameter,
should not be modified.
This parameter is basic identification parameter, should not be
Reason
modified.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
2-1469
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.45.17 HARQ Power Offset for Common E-DCH MAC-d Flow (2ms
TTI)
Full Name
HARQ Power Offset for Common E-DCH MAC-d Flow (2ms TTI)
Abbreviated Name
cEdchHarqPOTti2
Managed Object

3GPP Name
E-DCH MAC-d flow power offset; E-DCH HARQ Power Offset FDD
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the HARQ power offset for common

E-DCH MAC-d flow when 2ms E-TTI is used.
Instance
RNC
ZWF26-02-003
0..6
Unit
N/A
Default Value
[6, 6, 6]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1470
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the E-DCH HARQ power offset
of the MAC-D flow carried by common E-DCH when 2ms E-TTI

is used, which is used to compute the quantized gain factor ed
of E-DPDCH.
Related Factor: service quality, system capacity.
If the parameter value is larger, the E-DPDCH transmission power
will be larger.Accordingly, it will improve the service quality but affect
the system capacity.
If the parameter value is smaller, the E-DPDCH transmission power
will be smaller. Accordingly, it will improve the system capacity but
affect the service quality.
The service quality and the system capacity are considered to
Reason
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.18 HARQ Power Offset for Common E-DCH MAC-d Flow (10ms
TTI)
Full Name
HARQ Power Offset for Common E-DCH MAC-d Flow (10ms TTI)
Abbreviated Name
cEdchHarqPOTti10
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-1471
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the HARQ power offset for common

E-DCH MAC-d flow when 10ms E-TTI is used.
Instance
RNC
ZWF26-02-003
0..6
Unit
N/A
Default Value
[6, 6, 6]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the E-DCH HARQ power offset
of the MAC-D flow carried by common E-DCH when 10ms E-TTI

is used, which is used to compute the quantized gain factor ed
of E-DPDCH.
Related Factor: service quality, system capacity.
If the parameter value is larger, the E-DPDCH transmission power
will be larger.Accordingly, it will improve the service quality but affect
If the parameter value is smaller, the E-DPDCH transmission power
will be smaller. Accordingly, it will improve the system capacity but
affect the service quality.
The service quality and the system capacity are considered to
Reason
Change Take Effect
Yes
How to Impact

Access
Read/Write
2-1472
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.45.19 Maximum Number of Retransmissions for Common E-DCH

MAC-d Flow (2ms TTI)
Full Name
Maximum Number of Retransmissions for Common E-DCH MAC-d

Flow (2ms TTI)
Abbreviated Name
cEdchMaxRetrTti2
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

for common E-DCH MAC-d flow when 2ms E-TTI is used.
Instance
RNC
ZWF26-02-003
0..15
Unit
N/A
Default Value
[3, 3, 3]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1473
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the maximum number of
retransmissions for the MAC-D flow carried by common E-DCH

when 2ms E-TTI is used.
Related Factor: data accuracy, service data throughput;
If the parameter value is larger, there is more times of HARQ
retransmission. Accordingly, it will improve the data accuracy but
affect the service data throughput.
If the parameter value is smaller, there is less times of HARQ
retransmission. Accordingly, it will improve the data throughput but
affect the data accuracy.
The data accuracy and the throughput are considered to define
Reason
this default value.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.20 Maximum Number of Retransmissions for Common E-DCH

MAC-d Flow (10ms TTI)
Full Name
Maximum Number of Retransmissions for Common E-DCH MAC-d

Flow (10ms TTI)
Abbreviated Name
cEdchMaxRetrTti10
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-1474
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

for common E-DCH MAC-d flow when 10ms E-TTI is used.
Instance
RNC
ZWF26-02-003
0..15
Unit
N/A
Default Value
[3, 3, 3]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the maximum number of
retransmissions for the MAC-D flow carried by common E-DCH

when 10ms E-TTI is used.
Related Factor: data accuracy, service data throughput;
If the parameter value is larger, there is more times of HARQ
retransmission. Accordingly, it will improve the data accuracy but
affect the service data throughput.
If the parameter value is smaller, there is less times of HARQ
retransmission. Accordingly, it will improve the data throughput but
affect the data accuracy.
The data accuracy and the throughput are considered to define
Reason
this default value.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
2-1475
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.45.21 Common E-DCH Maximum Uplink RLC PDU Size

Full Name
Common E-DCH Maximum Uplink RLC PDU Size
Abbreviated Name
cEdchMaxRlcSize
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the maximum size in octets of the RLC

PDU in the flexible RLC PDU size mode used in common E-DCH.
Instance
RNC
ZWF26-02-003
Unit
bytes
Default Value
[124, 124, 600]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the maximum size in octets of
the RLC PDU in the flexible RLC PDU size mode used in common
E-DCH.
Configuration Rule: Considering data rate and packet error rate.
Relative larger value can improve the supported rate, but it cannot
be set too large, because, in order to avoid the influence of the error
of PLC PDU made by too more MAC segmentations when the radio
condition becomes worse.
2-1476
SJ-20141209142030-013|2015-11-12 (R1.3)
Considering data rate and packet error rate.
Reason
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.22 Common E-DCH Minimum Uplink RLC PDU Size

Full Name
Common E-DCH Minimum Uplink RLC PDU Size
Abbreviated Name
cEdchMinRlcSize
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the minimum size in octets of the RLC

PDU in the flexible RLC PDU size mode used in common E-DCH.
Instance
RNC
ZWF26-02-003
Unit
bytes
Default Value
[21, 21, 45]
Related Parameters
N/A
N/A
Parameters
2-1477
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the minimum size in octets of
the RLC PDU in the flexible RLC PDU size mode used in common
E-DCH.
Configuration Rule: Considering transmission performance when
power is limited and the L2 overhead.
Relative smaller value can improve the transmission performance
when UE power is limited. But it cannot be set too small, in order
to avoid too large L2 overhead.
Considering transmission performance when power is limited and
Reason
the L2 overhead.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.23 Common E-DCH Maximum Uplink MAC-C PDU Size for

Fixed PDU
Full Name
Common E-DCH Maximum Uplink MAC-C PDU Size for Fixed PDU
Abbreviated Name
cEchMxMcSizFix
Managed Object

3GPP Name
Maximum MAC-c PDU Size Extended / MAC PDU Size Extended
2-1478
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the maximum size (in bytes) of the uplink
MAC-C PDU in fixed RLC PDU size mode over the common E-DCH.
Instance
RNC
ZWF26-02-003
Unit
bytes
Default Value
[18, 18, 82]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the maximum size (in
bytes) of the uplink MAC-C PDU on the common E-DCH when the
fixed RLC PDU size mode is used.
Configuration rule: The data rate and the packet error rate must
be considered.
A large parameter can improve the supported rate. A too large
parameter is not allowed because RLC PDU errors may be caused
by too many MAC segmentations when the radio condition becomes
bad during RLC PDU retransmission.
The default value is set based on the data rate and the packet
Reason
error rate.
Change Take Effect
Yes
How to Impact

Access
Read/Write
2-1479
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.45.24 Spreading Factor Supported by Uplink Enhanced

CELL_FACH
Full Name
Spreading Factor Supported by Uplink Enhanced CELL_FACH
Abbreviated Name
ulEfachSF
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the spreading factor supported by Uplink

enhanced CELL_FACH.
Instance
RNC
ZWF26-02-003
0: 2SF4( 2SF4)
1: 2SF2( 2SF2)
2: 2SF2+2SF4(2SF2+2SF4)
Unit
N/A
Default Value
0: 2SF4( 2SF4)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1480
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the spreading factor supported
by Uplink enhanced CELL_FACH.

Configuration Rule: Considering the user rate and uplink CE
The smaller the SF, the higher data rate may be obtained, but the
larger the CE resource will be cost. The larger the SF, the lower
data rate may be obtained, but the less the CE resource will be cost.
Considering the user rate and uplink CE resource consumption.
Reason
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.45.25 Happy Bit Delay for Common E-DCH

Full Name
Happy Bit Delay for Common E-DCH
Abbreviated Name
happyBitDelCEdch
Managed Object

3GPP Name
Happy bit delay condition
3GPP Reference
TS 25.331;
TS 25.321
Description
This parameter indicates the delay time configured in the RNC for
the UE to send the Happy bit in the uplink enhanced CELL_FACH
state. After the E-TFC selection is complete, the current
authorization will be estimated within the period of time (Happy
bit delay condition) configured in the RRC for the MAC. For more
information, refer to TS25.321.
2-1481
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF26-02-003
(2ms[0], 10ms[1], 20ms[2], 50ms[3], 100ms[4], 200ms[5], 500ms[6],

1000ms[7])
Unit
ms
Default Value
50ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the delay time
configured in the RNC for the UE to send the Happy bit in the uplink
enhanced CELL_FACH state.
Related factors: service delay, uplink power overhead for
transmitting the Happy bit
The greater this parameter, the longer the service delay and the
smaller uplink power overhead for transmitting the Happy bit.
The smaller this parameter, the shorter the service delay and the
greater uplink power overhead for transmitting the Happy bit.
Service delay and uplink power overhead for transmitting the Happy
Reason
bit are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1482
SJ-20141209142030-013|2015-11-12 (R1.3)

Profile(UGbrResLimitProfile)
2.46.1 Limiting HSDPA GBR Resource Consumption Profile Object
ID
Full Name
Limiting HSDPA GBR Resource Consumption Profile Object ID
Abbreviated Name
UGbrResLimitProfileId
Managed Object
Limiting HSDPA GBR Resource Consumption Profile(UGbrResLimitProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the HSDPA GBR resource

consumption suppression profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-1483
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Measurement Configuration->Limiting

HSDPA GBR Resource Consumption Profile
N/A
N/A
2.46.2 Limiting HSDPA GBR Resource Consumption Profile ID

Full Name
Limiting HSDPA GBR Resource Consumption Profile ID
Abbreviated Name
profileId
Managed Object
Limiting HSDPA GBR Resource Consumption Profile(UGbrResLimitProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of the GBR resource consumption

limitation parameter profile. According to different requirements
for GBR resource consumption limitation, the same set of GBR
resource consumption limitation parameters has multiple sets of
configurations. This parameter can be used to index different
configurations.
Instance
UTRAN Cell
ZWF23-04-002
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1484
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the ID of the GBR
resource consumption limitation parameter profile.

Related factors: Different configurations of HSDPA GBR resource
consumption limitation parameters must have different profile IDs.
be modified.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

HSDPA GBR Resource Consumption Profile
N/A
N/A

Configuration(UGbrResLimit)
2.47.1 Limiting HSDPA GBR Resource Consumption Configuration
Object ID
Full Name
Limiting HSDPA GBR Resource Consumption Configuration Object

ID
Abbreviated Name
UGbrResLimitId
2-1485
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
Limiting HSDPA GBR Resource Consumption Configuration(UGbrResLimit)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the HSDPA GBR resource

consumption suppression configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

HSDPA GBR Resource Consumption Profile->Limiting HSDPA GBR
Resource Consumption Configuration
2-1486
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.47.2 Guaranteed Bit Rate Level Number of HSDPA Services for

Limiting HSDPA GBR Resource Consumption
Full Name
Guaranteed Bit Rate Level Number of HSDPA Services for Limiting

HSDPA GBR Resource Consumption
Abbreviated Name
hsGBRLevNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the guaranteed bit rate level number of

HSDPA services. It is used in resources consumption control of
HSDPA GBR services.
Instance
UTRAN Cell
ZWF23-04-002
1..MAX_NUM_HS_GBR, MAX_NUM_HS_GBR=33
Unit
N/A
Default Value
12
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1487
SJ-20141209142030-013|2015-11-12 (R1.3)
GBR levels of HSDPA services for limiting HSDPA GBR resource

consumption.
Related factors: The number of HSDPA GBR levels is based on
the requirements of HSDPA GBR services for different resource
consumption limits. Too few levels cannot meet the requirements of
different services. Too many levels are not necessary.
If this parameter is large, the number of HSDPA GBR levels is large.
If this parameter is small, the number of HSDPA GBR levels is small.
The default GBR level number is 12, which is big enough to meet
Reason
the requirement of different HSDPA GBR resource consumption

limits on different HSDPA GBR services.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.47.3 Guaranteed Bit Rate Levels of HSDPA Services for Limiting

Full Name
Guaranteed Bit Rate Levels of HSDPA Services for Limiting HSDPA

GBR Resource Consumption
Abbreviated Name
hsGBRLev
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1488
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the guaranteed bit rate levels of HSDPA

services. It is used in resources consumption control of HSDPA
GBR services. MAX_NUM_HS_GBR=33.
Instance
UTRAN Cell
ZWF23-04-002
13600, 23850, 38800, 64000, 128000, 384000, 768000, 900000,

1200000, 1800000, 3650000, 4096000, 6144000, 7200000,
8640000, 10100000, 14000000, 17600000, 21096000, 42192000
Unit
bps
Default Value
[23850, 38800, 64000, 128000, 384000, 768000, 1200000,

3650000, 7200000, 10100000, 14000000, 21096000] bps
Related Parameters
hsGBRLevNum
hsGBRLev[0]< hsGBRLev[1]< hsGBRLev[2]<< hsGBRLev[hsG-
Parameters
BRLevNum-1], where hsGBRLevNum > 1.
Data Type
long[DBS_RR_MAX_NUM_HS_GBR]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the GBR levels of
HSDPA services for limiting HSDPA GBR resource consumption.

Related factors: During the configuration of GBR levels, resource
consumption limit requirements of different HSDPA GBR services
should be considered. Services with similar GBR resource
consumption should be allocated to the same GBR level. The GBR
level relationships are hsGBRLev [0] < hsGBRLev [1] < hsGBRLev
[2] << hsGBRLev [hsGBRLevNum-1]. The bigger the GBR level,
the higher the HS-DSCH Required Power Per UE Weight threshold
(ueHsReqPwrUplim).
The default GBR levels can satisfy the requirement for different
Reason
HSDPA GBR resource consumption limits on different HSDPA GBR

services, and the services with similar GBR resource consumption
are allocated to the same GBR level.
Change Take Effect
No
2-1489
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.47.4 UE HS-DSCH Required Power Upper Limit for Limiting

Full Name
UE HS-DSCH Required Power Upper Limit for Limiting HSDPA

GBR Resource Consumption
Abbreviated Name
ueHsReqPwrUplim
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the upper limit to the required power for
limiting HSDPA GBR resource consumption, and is expressed in
the form of CPICH transmit power offset. If the required transmit
power of a UE's HSDPA GBR service is higher than this threshold,
this UE is consuming resources excessively and the resource
consumption by this UE should be reduced. One threshold is set for
each HSDPA service GBR level (hsGBRLev[MAX_NUM_HS_GBR],
MAX_NUM_HS_GBR = 33) one by one.
Instance
UTRAN Cell
ZWF23-04-002
(-35..+15)dB, step 0.1dB
Unit
dB
Default Value
[3, 3.5, 4, 4.5, 5, 5.5 , 6, 6.5, 7, 7.5, 8, 8.5]dB
Related Parameters
N/A
2-1490
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
double[DBS_RR_MAX_NUM_HS_GBR]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the upper limit to the
required power for limiting HSDPA GBR resource consumption.

Related factors: The requirements of HSDPA GBR services for
different resource consumption limits should be considered.
Services with similar GBR resource consumption should be
allocated to the same GBR level. The GBR level relationships
are hsGBRLev [0] < hsGBRLev [1] < hsGBRLev [2] <<
hsGBRLev [hsGBRLevNum-1]. The higher the GBR level,
the higher the HS-DSCH Required Power Per UE Weight
threshold (ueHsReqPwrUplim). Therefore, ueHsReqPwrUplim
[0] <= ueHsReqPwrUplim [1] <= ueHsReqPwrUplim [2] <=<=
ueHsReqPwrUplim [hsGBRLevNum-1].
The default value of this parameter can satisfy the requirement
Reason
of different HSDPA GBR resource consumption limits on

different HSDPA GBR services, and ueHsReqPwrUplim
[0] <= ueHsReqPwrUplim [1] <= ueHsReqPwrUplim [2]
<=<=ueHsReqPwrUplim [11].
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-1491
SJ-20141209142030-013|2015-11-12 (R1.3)
2.48 MBMS Configuration(UMbms)

2.48.1 MBMS Configuration Object ID
Full Name
MBMS Configuration Object ID
Abbreviated Name
UMbmsId
Managed Object
MBMS Configuration(UMbms)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of global MBMS configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-1492
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->MBMS Configuration
N/A
N/A
2.48.2 S Traffic on PTP or PTM Switch

Full Name
S Traffic on PTP or PTM Switch
Abbreviated Name
sOnPTP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether streaming services can be carried

by PTP.
If this switch is set to "On", PTP or PTM transmission can be
selected for the streaming services.
If this switch is set to "Off", streaming services can only be carried
by PTM.
Instance
RNC
ZWF24-02-003
MBMS Bearer Type Selection and Transition
MBMS FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1493
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: It indicates whether streaming services can be
carried by PTP. Services are mapped on the DCH or HS-DSCH in

PTP, and on the FACH in PTM.
Related factors: downlink code and power resource.
If the operator enables this function, streaming services are carried
in PTP or PTM according to the number of UEs responding the
counting.
If the operator disables this function, streaming services are carried
in PTM. The downlink code and power resource may be less, but
the soft handover cannot be used.
If the MBMS is not used, this parameter is invalid.
Generally, the rate of MBMS Streaming services is high.
Reason
If the services are carried by PTP, they consume more resources. So

the default value is set to disable the PTP function for simplification.
MBMS streaming services are carried in PTM.
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.3 B Traffic on PTP or PTM Switch

Full Name
B Traffic on PTP or PTM Switch
Abbreviated Name
bOnPTP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1494
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether MBMS background services can

be carried by PTP.
If this switch is set to "On", PTP or PTM transmission can be
selected for the background service.
If this switch is set to "Off", only PTM transmission can be used.
When PTP is adopted, each UE should be allocated with dedicated
resources, and MBMS background services are mapped on the
DCH or HS-DSCH.
When PTM is adopted, MBMS background services are mapped
on the FACH.
Instance
RNC
ZWF24-02-003
MBMS FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether MBMS background
services can be carried by PTP. Services are mapped on the DCH or

HS-DSCH in PTP mode, and mapped on the FACH in PTM mode.
Related factors: Downlink Code Resource, and downlink Power
Resource.
If the parameter is set to "On", when the number of the counted
MBMS UEs is less than the PThreUENum parameter, the code
resource and power consumption in PTP are less than those
consumed in PTM and the RNC decides whether to adopt PTP.
If the parameter is set to "Off", only PTM can be used for MBMS
background services.
The rate of MBMS background services is often low. So PTM
Reason
transmission is adopted for simplification.
2-1495
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.4 The Minimum Rate Threshold of the SCCPCH Setup for

MBMS
Full Name
The Minimum Rate Threshold of the SCCPCH Setup for MBMS
Abbreviated Name
mbmsMinRate
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum rate threshold of a newly

established S-CCPCH channel for MBMS services.
Instance
RNC
ZWF24-01-031
MBMS Admission Control
MBMS FG
(16[0], 32[1], 64[2], 128[3], 256[4], 348[5]) kbps
Unit
kbps
Default Value
64
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-1496
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: It indicates the minimum rate of a newly
established S-CCPCH channel for MBMS services in order to avoid

the frequent deletion or re-establishment of the S-CCPCH channel.
Related factors: number of times that the S-CCPCH channel is
deleted and established, and resource usage rate.
The bigger the parameter value, the higher the rate of the
S-CCPCH channel. With a higher rate, more MBMS services can
be carried by one S-CCPCH channel, and the frequent deletion or
re-establishment of the S-CCPCH channel can be avoided. But if
the properties (TTI and TB size) of MBMS services differ greatly,
services of different properties are mapped to different S-CCPCH
channels, which waste the downlink resource.
The smaller the parameter value, the lower the rate of the S-CCPCH
channel. With a lower rate, limited MBMS services can be carried
by one S-CCPCH channel, and this S-CCPCH channel may be
deleted or established frequently. But if the properties (TTI and TB
size) of MBMS services differ greatly, the wasted resources on each
S-CCPCH channel are limited, and the downlink resources can be
fully used.
The default value is set in accordance with the utilization of
Reason
S-CCPCH and the number of times for deleting and establishing

a physical channel.
Change Take Effect
New MBMS Session
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1497
SJ-20141209142030-013|2015-11-12 (R1.3)
2.48.5 MSCH Supported Switch

Full Name
MSCH Supported Switch
Abbreviated Name
mschSptSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether an MSCH (MBMS

point-to-multipoint Scheduling Channel) is supported or not.
The MSCH is used for the MBMS scheduling information of PTM
downlink transmission from network to UEs in the RRC Connected
Mode or Idle Mode. With the MBMS scheduling information, the
system can notify UEs to perform discontinuous reception of MTCH
and lower the power consumption of UEs.
This parameter is only applied to background services, because
streaming services cannot be transmitted discontinuously due to
QoS attributes.
Instance
RNC
ZWF24-01-004
MBMS Scheduling Information
MBMS FG
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1498
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: it indicates whether MSCH is supported or not.
This function can make UE receive in the DRX mode to save the
power consumption of UEs.
Related factors: power consumption of UEs and QoS of DRX
services.
If the operator enables the function, UEs can receive the MBMS
service in DRX, which can save the power consumption of UEs, but
the data may be discarded if not scheduled in time.
If the operator disables the function, UEs cannot receive the MBMS
service in DRX, which cannot save the power consumption of UEs.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.6 S Traffic Frequency Converge Switch

Full Name
S Traffic Frequency Converge Switch
Abbreviated Name
sFreqConvSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1499
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether frequency convergence is

applied to MBMS streaming services. In a multi-frequency sector,
one frequency may be selected as the preferred one to carry
MBMS streaming services. The system indicates the UEs in non
CELL_DCH to converge to the preferred frequency to receive
MBMS streaming services. When MBMS sessions are over, the
UEs go back to the original cell by performing cell reselection.
Instance
RNC
ZWF24-01-007
Frequency Layer Convergence and Dispersion
MBMS FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It is a switch to control whether the Frequency
Convergence function is applied to MBMS streaming services.

Related factors: downlink power resource, and RNC computation
load.
If the operator enables this function, the RNC chooses the preferred
frequency, and a UE receives the service in soft-combining more
easily. The required power of S-CCPCH will be lower, but the RNC
computation load is higher.
If the operator disables this function, the RNC does not choose the
preferred frequency, and a UE receives the service in soft-combining
more difficultly. The required power of S-CCPCH will be higher, but
the RNC computation load is lower.
The RNC computation load is considered.
Reason
Change Take Effect
New MBMS Session
No
2-1500
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.7 B Traffic Frequency Converge Switch

Full Name
B Traffic Frequency Converge Switch
Abbreviated Name
bFreqConvSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the background traffic frequency convergence

switch.
This parameter indicates whether frequency convergence is applied
to MBMS background services.
In a multi-frequency sector, one frequency may be selected as the
preferred one to carry MBMS background services. The system
indicates the UEs in non CELL_DCH to converge to the preferred
frequency to receive MBMS background services. When MBMS
sessions are over, the UEs go back to the original cell by performing
cell reselection.
Instance
RNC
ZWF24-01-007
Frequency Layer Convergence and Dispersion
MBMS FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
2-1501
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It is a switch to control whether the Frequency
Convergence function is applied to MBMS background services. If

multiple intra-frequency neighboring cells send the same MBMS in
PTM, the UE can soft-combine the signals from these cells to save
the downlink power.
Related factors: power resource, and preferred frequency layer
computation load on the RNC if no preferred frequency configured.
If this function is enabled, the probability of UE receiving services in
soft-combining is higher, so that the S-CCPCH sends services with
less power, but the RNC computation load is higher.
The RNC computation load is considered.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.8 SCCPCH Power Offset for Soft Combining

Full Name
SCCPCH Power Offset for Soft Combining
Abbreviated Name
pwrForSoftCom
Managed Object
2-1502
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power of SCCPCH that is used to

bear MTCH information when the soft combination receiving mode
is used. This parameter is the offset related to SCCPCH Power
for Single Cell Reception.
Instance
RNC
ZWF24-01-033
MBMS Power Allocation
MBMS FG
Unit
dB
Default Value
-7dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter is related to MBMS, and
indicates the power of the SCCPCH that is used to bear MTCH

information when the soft combination mode is used for reception.
If the parameter value is large, the transmit power of the
MTCH-bearing SCCPCH is large when the selective combination
mode is used for reception, and the system capacity is reduced.
If the parameter value is small, the transmit power of the
MTCH-bearing SCCPCH is small when the selective combination
mode is used for reception, and the service quality is affected.
Reason
Change Take Effect
No
2-1503
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.9 SCCPCH Power Offset for Selective Combining

Full Name
SCCPCH Power Offset for Selective Combining
Abbreviated Name
pwrForSelCom
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the power of the SCCPCH that is used to

bear MTCH information when the selective combination mode is
used for reception. This parameter is the offset related to SCCPCH
Power for Single Cell Reception.
Instance
RNC
ZWF24-01-033
MBMS FG
Unit
dB
Default Value
-5 dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1504
SJ-20141209142030-013|2015-11-12 (R1.3)
indicates the power of the SCCPCH that is used to bear MTCH

information when the selective combination mode is used for
reception.
If the parameter value is large, the transmit power of the
MTCH-bearing SCCPCH is large when the selective combination
mode is used for reception, and the system capacity is reduced.
If the parameter value is small, the transmit power of the
MTCH-bearing SCCPCH is small when the selective combination
mode is used for reception, and the service quality is affected.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.10 Threshold for Cell in Half-island Status

Full Name
Threshold for Cell in Half-island Status
Abbreviated Name
threshForHalfIsd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1505
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the threshold for determining whether a

cell enters half-island status. A cell enters half-island status when
the number of neighboring cells that transmit the same MBMS
service is smaller than or equal to this threshold, but greater than
the Threshold for Cell in Island Status parameter. This parameter is
used for configuring appropriate power in this status.
Instance
RNC
ZWF24-01-033
MBMS FG
0..15
Unit
N/A
Default Value
Related Parameters
threshForIsd
threshForHalfIsd > threshForIsd
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: MBMS-related parameter. This parameter
indicates the threshold for determining whether a cell enters

half-island status.
If this parameter is set to a too great value, a cell may use the
transmit power of the half-island status, which may affect system
capacity due to a large amount of power consumption.
If this parameter is set to a too small value, a cell may use the
transmit power of the normal combined state, which may affect the
quality of the MBMS service.
Reason
Change Take Effect
No
How to Impact
N/A
2-1506
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.48.11 Threshold for Cell in Island Status

Full Name
Threshold for Cell in Island Status
Abbreviated Name
threshForIsd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold for determining whether

a cell enters island status. A cell enters island status when the
number of neighboring cells that transmit the same MBMS service is
smaller than or equal to this threshold. This parameter is used for
configuring appropriate power in this status.
Instance
RNC
ZWF24-01-033
MBMS FG
0..15
Unit
N/A
Default Value
Related Parameters
threshForHalfIsd
threshForHalfIsd > ThreshForIsd
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1507
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: MBMS-related parameter. This parameter
indicates the threshold for determining whether a cell enters island

status.
If this parameter is set to a too great value, a cell may use the
transmit power of the island status, which may affect system
capacity due to a large amount of power consumption.
If this parameter is set to a too small value, a cell may use the
transmit power of the half-island status, which may affect the quality
of the MBMS service.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.12 Downlink Switch for Dropping MBMS Services

Full Name
Downlink Switch for Dropping MBMS Services
Abbreviated Name
dlMbmsDropSw
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the MBMS services are allowed to

be released forcefully (which means that the S-CCPCH channel of
MBMS services is released) during MBMS overload control.
Instance
RNC
ZWF24-01-035
2-1508
SJ-20141209142030-013|2015-11-12 (R1.3)
MBMS Overload Control
MBMS FG
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether to drop MBMS
services during MBMS overload control. RNC selects a number

(dlMaxDrpUsrNum) of RABs with the lowest load control priority
from all non-MBMS and MBMS services as candidates for release.
Related factors: downlink load, load control priority, and the drop
rate of MBMS services.
If this function is enabled, the RNC can drop MBMS services
after executing the power decrease policy. The cell load can be
decreased quickly but the drop rate of MBMS services will increase.
If this function is disabled, the RNC cannot drop MBMS services and
thus the cell load decreases slowly.
The default value is set to reduce the load quickly.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1509
SJ-20141209142030-013|2015-11-12 (R1.3)
2.48.13 Counting Scope for URA_PCH

Full Name
Counting Scope for URA_PCH
Abbreviated Name
urapchCount
Managed Object
3GPP Name
Connected mode counting scope
3GPP Reference
TS 25.331
Description
This parameter indicates whether the UEs in URA_PCH state are

required to send MBMS counting responses if these UEs expect to
receive MBMS services. The RNC counts the number of such UEs
and then determines the transmission mode (PTP or PTM).
Instance
RNC
ZWF24-02-003
MBMS FG
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether UEs in URA_PCH state are
required to send MBMS counting response if these UEs expect to

receive MBMS services.
Related factors: downlink code resources, power resources, and
load of response messages returned by the UEs on the Uu interface.
If this function is enabled, the UEs in URA_PCH state return
messages to receive this MBMS service, so that the users who need
this service can be counted. This service is easier to be transmitted
in PTM mode, which saves the downlink code resources and power
2-1510
SJ-20141209142030-013|2015-11-12 (R1.3)
resources. But if more UEs need this service, the load of the Uu
interface in uplink will increase.
If this function is disabled, the UEs in URA_PCH state do not
respond to the counting message and the users who need this
service cannot be counted so that it is difficult to reach the threshold
of counted MBMS UE number used for switching between PTP and
PTM, which increases the requirements on downlink code resources
and power resources.
The default value is set to make more UEs to respond the
Reason
counting/recounting requests, so that MBMS services can be easier

to be transmitted in PTM mode.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.14 Counting Scope for Cell_PCH

Full Name
Counting Scope for Cell_PCH
Abbreviated Name
cellpchCount
Managed Object
3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates whether UEs in CELL_PCH who expect

to receive the MBMS service are required to send MBMS Counting
Response. An RNC counts the number of UEs and decides to
adopt PTP or PTM.
Instance
RNC
2-1511
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF24-02-003
MBMS FG
0: False
1: True
Unit
N/A
Default Value
2: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: It indicates whether UEs in CELL_PCH state
are required to send MBMS Counting response.

Related factors: Downlink Code Resource, Power Resource, and
message load of MBMS on the Uu interface in uplink.
If the operator enables this function, the UEs in CELL_PCH respond
to the counting, and the number of UEs is increased. It is easier
to use the PTM for MBMS services, and the downlink codes and
power resource are reduced, but the uplink load of Uu increases
more quickly.
If the operator disables this function, the UEs in CELL_PCH do
not respond to the counting. It is more difficult to use the PTM for
MBMS services, and the downlink codes and power resource are
increased, but the uplink load of Uu increases more slowly.
The default value is set in order to make more UEs to respond the
Reason
counting/recounting, so that the MBMS service will transport in

PTM more easily.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1512
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.48.15 Counting Scope for Cell_FACH

Full Name
Counting Scope for Cell_FACH
Abbreviated Name
cellfachCount
Managed Object
3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates whether UEs in CELL_FACH who expect

to receive the MBMS service are required to send MBMS Counting
Response. An RNC counts the number of UEs and decides to
adopt PTP or PTM.
Instance
RNC
ZWF24-02-003
MBMS FG
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1513
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: it indicates whether UEs in CELL_FACH state
are required to send MBMS counting response.

Related factors: Downlink Code Resource, Power Resource, and
message load of MBMS on the Uu interface in uplink.
If the operator enables this function, the UEs in CELL_FACH
respond to the counting, and the number of UEs is increased. It
is easier to use the PTM for MBMS services, and the downlink
codes and power resource are reduced, but the uplink load of Uu
increases more quickly.
If the operator disables this function, the UEs in CELL_FACH do
not respond to the counting. It is more difficult to use the PTM for
MBMS services, and the downlink codes and power resource are
increased, but the uplink load of Uu increases more slowly.
The default value is set to make more UEs respond to the counting,
Reason
so that the MBMS service can be transmitted in PTM more easily.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.16 UE Number Threshold for PTP and PTM Switch

Full Name
UE Number Threshold for PTP and PTM Switch
Abbreviated Name
pThreUENum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1514
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the number threshold of counted MBMS

UEs used for switching between PTP and PTM.
If the number of the counted MBMS UEs is larger than or equal
to this threshold, and the related conditions are met, PTP will be
switched to PTM.
If the number of counted MBMS UEs is smaller than this threshold
and non-zero, and the related conditions are met, PTM will be
switched to PTP.
Instance
RNC
ZWF24-02-003
MBMS FG
1..64
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: It indicates the threshold of UE number used
for switching between PTP and PTM in order to control the rate of
transferring between PTP and PTM.
Related factors: downlink code and power resource.
The larger the parameter, the more difficult the transfer from PTP
to PTM, the easier the transfer from PTM to PTP, and the more
required code and power resources.
The smaller the parameter, the easier the transfer from PTP to PTM,
the more difficult the transfer from PTM to PTP, and the less the
required code and power resources.
PTM is used for simplification.
Reason
Change Take Effect
No
2-1515
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.48.17 Waiting Time for RRC CONNECTION SETUP Message When

MBMS is Used (T318)
Full Name
Waiting Time for RRC CONNECTION SETUP Message When

MBMS is Used (T318)
Abbreviated Name
t318
Managed Object
3GPP Name
T318
3GPP Reference
TS 25.331
Description
Timer T318 starts on the transmission of RRC CONNECTION

REQUEST with the cause "MBMS reception" and stops on the
reception of RRC CONNECTION SETUP. If T318 expires, UE enters
idle mode and does not send RRC CONNECTION REQUEST any
more.
Instance
RNC
ZWF24-01-001
MBMS Services
MBMS FG
(250[0], 500[1], 750[2], 1000[3], 1250[4], 1500[5], 1750[6], 2000[7],

3000[8], 4000[9], 6000[10], 8000[11], 10000[12], 12000[13],
16000[14]) ms
Unit
ms
Default Value
1000
Related Parameters
N/A
N/A
Parameters
2-1516
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: It is a timer that starts from the time when the
RRC Connection request message with cause "MBMS reception"

is sent to the time when the RRC connection setup message is
received.
Related factors: RRC Success Ratio, the duration from the time
when a UE initiates an RRC connection request message to the
time when the UE changes to the IDLE mode if the timer expires,
and the round-trip delay between UE and UTRAN.
The bigger the parameter value, the longer the duration for waiting
the RRC CONNECTION SETUP message. In this case, the UE has
more chance to receive the RRC CONNECTION SETUP message,
but the UE requires more time to become the idle mode if the timer
expires, which affects user experience.
The smaller the parameter value, the shorter the duration for waiting
the RRC CONNECTION SETUP message. In this case, the UE has
less chance to receive the RRC CONNECTION SETUP message,
but the UE requires less time to become the idle mode if the timer
expires, and the RRC establishment ratio will reduce.
It is set according to the probability of RRC connection successfully,
Reason
the time of UE wait to idle mode after RRC connection request and
the round-trip delay between UE and UTRAN.
It is set in accordance with the following factors: RRC Success
Ratio, the duration from the time when a UE initiates an RRC
connection request message to the time when the UE changes to
the IDLE mode if the timer expires, and the round-trip delay between
UE and UTRAN.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1517
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.48.18 MBMS Iub Transport Bearer Multiplex Switch

Full Name
MBMS Iub Transport Bearer Multiplex Switch
Abbreviated Name
mbmsIubMultSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch indicating whether Iub transport bearer

multiplexing is used on the Iub interface
Instance
RNC
ZWF24-01-A
MBMS FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter is a switch indicating whether Iub transport
bearer multiplexing is used on the Iub interface.

Configuration Rule: According to whether the Node B supports Iub
transport bearer multiplexing.
This switch is opened by default which should be adjusted according
Reason
to whether the Node B support Iub transport bearer multiplexing.
Change Take Effect
2-1518
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.49 UE DTX/DRX Profile(UDtxDrxProfile)

2.49.1 UE DTX/DRX Profile Object ID
Full Name
UE DTX/DRX Profile Object ID
Abbreviated Name
UDtxDrxProfileId
Managed Object
UE DTX/DRX Profile(UDtxDrxProfile)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UE DTX/DRX profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-1519
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->UE DTX/DRX Profile
N/A
N/A
2.49.2 UE DTX/DRX Configuration Index

Full Name
UE DTX/DRX Configuration Index
Abbreviated Name
profileId
Managed Object
UE DTX/DRX Profile(UDtxDrxProfile)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is UE DTX/DRX configuration Index which indicates

a set of DTX/DRX parameters. Each service obtains the DTX/DRX
parameters according to the UE DTX/DRX configuration index.
Instance
Service Related
ZWF26-01-007
ZWF26-01-008
UL DTX
DL DRX
2-1520
SJ-20141209142030-013|2015-11-12 (R1.3)
1.. MAX_NUM_DTXDRX_CONFIG_INDEX
Where MAX_NUM_DTXDRX_CONFIG_INDEX =50.
Unit
N/A
Default Value
Non-realtime: 1
Realtime: 2
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter is UE DTX/DRX configuration Index which
indicates a set of DTX/DRX parameters.

Configuration Rule: Numbering the different sets of DTX/DRX
parameters of the system. Services of the same QoS should be
configured with the same index.
Numbering the different sets of DTX/DRX parameters of the
Reason
system. Realtime and non-realtime services having different QoS

requirement and using different index separately.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->UE DTX/DRX Profile
N/A
N/A
2.50 UE DTX/DRX Configuration(UDtxDrx)

2.50.1 UE DTX/DRX Configuration Object ID
2-1521
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
UE DTX/DRX Configuration Object ID
Abbreviated Name
UDtxDrxId
Managed Object
UE DTX/DRX Configuration(UDtxDrx)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UE DTX/DRX

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->UE DTX/DRX Profile->UE DTX/DRX
Configuration
2-1522
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.50.2 UE DTX Cycle 1 for 2ms TTI

Full Name
UE DTX Cycle 1 for 2ms TTI
Abbreviated Name
dtxCyc1Tti2
Managed Object
3GPP Name
UE DTX cycle 1
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the DTX cycle used by the UE when the
UE activates uplink DTX mode 1 in the case of 2 ms E-DCH TTI.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 4, 5, 8, 10, 16, 20) subframe
Unit
subframe
Default Value
Non-realtime: 4 subframe
Realtime: 4 subframe
Related Parameters
UDtxDrxProfile.profileId, dtxCyc2Tti2, burst1Tti2, macDtxCycTti2,

drxCycleTti2
Under the same UDtxDrxProfile.profileId and same cpcHspaEInd,
Parameters
dtxCyc2Tti2 must be divisible by dtxCyc1Tti2.

burst1Tti2 must be smaller than or equal to dtxCyc1Tti2.
dtxCyc1Tti2 must be divisible by macDtxCycTti2, or macDtxCycTti2
must be divisible by dtxCyc1Tti2.
drxCycleTti2 must be divisible by dtxCyc1Tti2, or dtxCyc1Tti2 must
be divisible by drxCycleTti2.
Data Type
long
2-1523
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the DTX cycle used
by the UE when the UE activates uplink DTX mode 1 in the case of

2 ms E-DCH TTI.
Related factor: the uplink power and the speed for a UE to transit to
continuous transmission mode.
A large value indicates a long DTX cycle 1 used by the UE when
E-DCH TTI is 2ms. In case of long DTX cycle 1, more uplink
power is saved, but a long time is needed for the UE to transit to
continuous transmission.
A small value indicates a short DTX cycle 1 used by the UE when
E-DCH TTI is 2ms. In case of short DTX cycle 1, more uplink
power is consumed, but the UE can quickly transit to continuous
transmission.
The default value is set based on the uplink power and the speed of
Reason
transition to continuous transmission.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A

Full Name
Abbreviated Name
dtxCyc1Tti10
Managed Object
2-1524
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
UE DTX cycle 1
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the UE DTX cycle 1 for 10ms TTI. When
E-DCH TTI is 10ms and UL DTX mode is active, if UE enters DTX
mode controlled by UL DTX mode 1, UE will use the value indicated
by this parameter as DTX cycle 1.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 5, 10, 20) subframe
Unit
subframe
Default Value
Related Parameters
DtxDrxConfigIdx, DtxCyc2Tti10, Burst1Tti10, MacDtxCycTti10,

DrxCycleTti10
Parameters
dtxCyc2Tti10 must be the interger multiple of dtxCyc1Tti10 or can

be intergerly divided by dtxCyc1Tti10
burst1Tti10 must be less than or equal to dtxCyc1Tti10
drxCycleTti10 must be the interger multiple of dtxCyc1Tti10 or can
be intergerly divided by dtxCyc1Tti10.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the UE DTX cycle 1 for 10ms
TTI. When E-DCH TTI is 10ms and UL DTX mode is active, if UE

enters DTX mode controlled by UL DTX mode 1, UE will use the
value indicated by this parameter as DTX cycle 1.
Configuration Rule: Considering uplink power and the speed for UE
to transit to continuous transmission.
The larger this parameter is, the longer the cycle period when UE
is in DTX cycle 1 using 10ms E-TTI, the more power is saved but
2-1525
SJ-20141209142030-013|2015-11-12 (R1.3)
when UE transits to continous transmission the more delay will be

obtained. And vice versa.
Considering uplink power and the speed for UE to transit to
Reason
continuous transmission.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A

Full Name
Abbreviated Name
dtxCyc2Tti2
Managed Object
3GPP Name
UE DTX cycle 2
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
Instance
Service Related
ZWF26-01-007
UL DTX
(4, 5, 8, 10, 16, 20, 32, 40, 64, 80, 128, 160) subframe
2-1526
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
subframe
Default Value
Related Parameters
UHspa: : cqiCycle
Under the same UDtxDrxProfile.profileId and same
Parameters
cpcHspaEInd, dtxCyc2Tti2 must be divisible by one-half

cqiCycleCpcTti2 (cqiCycleCpcTti2/2), or one-half cqiCycleCpcTti2
(cqiCycleCpcTti2/2) must be divisible by dtxCyc2Tti2.
cqiCycleCpcTti2 contains three elements. Each of them must have
the preceding constraint relationships with dtxCyc2Tti2.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the UE DTX cycle 2 for 2ms TTI.
When E-DCH TTI is 2ms and UL DTX mode is active, if UE enters

DTX mode controlled by UL DTX mode 2, UE will use the value
indicated by this parameter as DTX cycle 2.
Configuration Rule: Considering uplink power and the accuracy of
the power when UE transiting to continuous transmission.
when UE transits to continous transmission the less accurate the
power. And vice versa.
Considering uplink power and the accuracy of the power when UE
Reason
transiting to continuous transmission.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2-1527
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
dtxCyc2Tti10
Managed Object
3GPP Name
UE DTX cycle 2
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
Instance
Service Related
ZWF26-01-007
UL DTX
(5, 10, 20, 40, 80, 160) subframe
Unit
subframe
Default Value
Related Parameters
UHspa: : cqiCycle
Parameters
dtxCyc2Tti10 must be divisible by one-half cqiCycleCpcTti10

(cqiCycleCpcTti10/2), or one-half cqiCycleCpcTti10
(cqiCycleCpcTti10/2) must be divisible dtxCyc2Tti10.
cqiCycleCpcTti10 contains three elements. Each of them must have
the preceding constraint relationships with dtxCyc10Tti10.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1528
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the UE DTX cycle 2 for 10ms
TTI. When E-DCH TTI is 10ms and UL DTX mode is active, if UE

enters DTX mode controlled by UL DTX mode 2, UE will use the
value indicated by this parameter as DTX cycle 2.
Configuration Rule: Considering uplink power and the accuracy of
the power when UE transiting to continuous transmission.
when UE transits to continous transmission the less accurate the
power. And vice versa.
Considering uplink power and the accuracy of the power when UE
Reason
transiting to continuous transmission.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.6 MAC DTX Cycle for 2ms TTI

Full Name
MAC DTX Cycle for 2ms TTI
Abbreviated Name
macDtxCycTti2
Managed Object
3GPP Name
MAC DTX Cycle
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-1529
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the MAC DTX cycle for which the UE
performs E-TFC selection periodically if the E-DCH TTI is 2 ms.
After the UE activates uplink DTX mode and does not send data for
continuous "MAC Inactivity Threshold-1" E-DCH TTIs, it selects an
E-TFC every "MAC DTX cycle" subframes. If the E-DCH TTI is 2
ms, the MAC DTX cycle is equal to MAC DTX Cycle for 2 ms TTI.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 4, 5, 8, 10, 16, 20) subframe
Unit
subframe
Default Value
Related Parameters
UDtxDrxProfile.profileId, dtxCyc1Tti2
Parameters
dtxCyc1Tti2 must be divisible by macDtxCycTti2, or macDtxCycTti2

must be divisible by dtxCyc1Tti2.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the MAC DTX cycle
for which the UE performs E-TFC selection periodically when the

E-DCH TTI is 2 ms.
Related factors: power consumption of the UE and data
transmission timeliness.
If the parameter is set to a large value, less uplink power will be
consumed, but the data transmission will be less timely.
If the parameter is set to a small value, more uplink power will be
consumed, but the data transmission will be more timely.
The default value is set based on the power consumption of the UE
Reason
and the data transmission timeliness.
Change Take Effect
New Connection
No
How to Impact
N/A
2-1530
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.7 MAC DTX Cycle for 10ms TTI

Full Name
MAC DTX Cycle for 10ms TTI
Abbreviated Name
macDtxCycTti10
Managed Object
3GPP Name
MAC DTX Cycle
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the MAC DTX cycle for 10ms TTI. When
UL DTX mode is active, if no E-DCH transmission has been
performed for the last MAC Inactivity Threshold-1 E-TTIs, UE will
perform E-TFC selection periodically in each MAC DTX cycle.
When E-DCH TTI is 10ms, MAC DTX cycle equals to MAC DTX
cycle for 10ms TTI.
Instance
Service Related
ZWF26-01-007
UL DTX
(5, 10, 20) subframe
Unit
subframe
Default Value
Related Parameters
DtxDrxConfigIdx, DtxCyc1Tti10
N/A
Parameters
Data Type
long
2-1531
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the MAC DTX cycle for 10ms
TTI. When UL DTX mode is active, if no E-DCH transmission has

been performed for the last MAC Inactivity Threshold-1 E-TTIs, UE
will perform E-TFC selection periodically in each MAC DTX cycle.
Configuration Rule: Considering power consumption of UE and the
timeliness of data transmission.
Configuration Rule: When 10ms E-TTI is used, the larger the
parameter, the less uplink power will be consumed, but the data
transmission will be delayed to some extent. And vice versa.
Considering power consumption of UE and the timeliness of data
Reason
transmission.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.8 Inactivity Threshold for UE DTX Cycle 2 for 2ms TTI

Full Name
Inactivity Threshold for UE DTX Cycle 2 for 2ms TTI
Abbreviated Name
dtxCyc2InactTrd2
Managed Object
3GPP Name
Inactivity Threshold for UE DTX cycle 2
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-1532
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the inactivity threshold for UE DTX cycle

2 for 2ms TTI. If there has no any E-DCH transmission for the
number of E-DCH TTIs indicated by this parameter, UE will use
UE DTX cycle 2 as DTX cycle, i.e. UE will transmit DPCCH burst
in each UE DTX cycle 2.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 2, 4, 8, 16, 32, 64, 128, 256) TTIs
Unit
TTI
Default Value
Non-realtime: 32 TTIs
Realtime: 32 TTIs
Related Parameters
DtxDrxConfigIdx, DtxLongPreLegth
Parameters
if dtxLongPreLegth is set to 4 or 15, dtxCyc2InactTrd2 must be

greater than or equal to 8 TTIs.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the inactivity threshold for UE
DTX cycle 2 for 2ms TTI. If there has no any E-DCH transmission
for the number of E-DCH TTIs indicated by this parameter, UE will
use UE DTX cycle 2 as DTX cycle, i.e. UE will transmit DPCCH
burst in each UE DTX cycle 2.
Configuration Rule: Considering uplink power consumption and the
timeliness for data transmission.
When using 2ms E-TTI, the larger the parameter is, the stricter for
UE to enter DTX cycle 2, and the more power is consumed, but once
there is data, it can be sent out more immediately. And vice versa.
Considering uplink power consumption and the timeliness for data
Reason
transmission.
Change Take Effect
New Connection
No
How to Impact
N/A
2-1533
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.9 Inactivity Threshold for UE DTX Cycle 2 for 10ms TTI

Full Name
Inactivity Threshold for UE DTX Cycle 2 for 10ms TTI
Abbreviated Name
dtxCyc2InactTrd10
Managed Object
3GPP Name
Inactivity Threshold for UE DTX cycle 2
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the inactivity threshold at which the UE

enters DTX status controlled by UE DTX cycle 2 in the case of 10
ms E-DCH TTI.When the UE detects that no E-DCH data is sent
for continuous "Inactivity Threshold for UE DTX cycle 2" TTIs, it
performs the DTX in accordance with the DTX cycle determined by
UE DTX cycle 2. This means that the UE sends a DPCCH burst
every "UE DTX cycle 2" TTIs.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 2, 4, 8, 16, 32, 64, 128, 256) TTIs
Unit
TTI
Default Value
Realtime: 8 TTIs
Related Parameters
UDtxDrxProfile.profileId, dtxLongPreLegth
Parameters

2-1534
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the inactivity threshold
for the UE to transit to the DTX state controlled by UE DTX cycle 2

in the case of 10 ms E-DCH TTI.
Related factors: uplink power consumption and data transmission
timeliness.
If the parameter is set to a large value, the condition will be stricter
for the UE to transit to DTX cycle 2 in the case of 10 ms E-TTI. In
this case, more uplink power will be consumed, but data can be
transmitted more quickly.
If the parameter is set to a small value, the condition will be less
strict for the UE to transit to DTX cycle 2 for 10 ms E-TTI. In this
case, less uplink power will be consumed, but data transmission is
relatively delayed.
The default value is set based on the uplink power consumption and
Reason
the data transmission timeliness.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.10 UE DTX Long Preamble Length

Full Name
UE DTX Long Preamble Length
Abbreviated Name
dtxLongPreLegth
Managed Object
2-1535
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
UE DTX long preamble length
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the number of time slots during which the
UE (in DTX status controlled by UE DTX cycle 2) preferentially
sends DPCCHs if E-DCH data is to be sent.
Instance
Service Related
ZWF26-01-007
UL DTX
(2, 4, 15) slots
Unit
slot
Default Value
Realtime: 4 TTIs
Related Parameters
UDtxDrxProfile.profileId, dtxCyc2InactTrd2, dtxCyc2InactTrd10
Parameters

greater than or equal to 8 TTIs, and dtxCyc2InactTrd10 must be
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
slots during which the UE (in DTX status controlled by UE DTX cycle
2) preferentially sends DPCCHs if E-DCH data is to be sent.
Related factors: uplink power consumption and whether the DPCCH
power can be synchronized with the current channel quality before
the UE resumes data transmission from the DTX cycle 2 state.
The larger the parameter value is, the more uplink power
consumption is, but the better the DPCCH power synchronization
with the current channel quality is when the UE resumes data
transmission from the DTX cycle 2 state.
The smaller the parameter is, the less uplink power consumption
is, but the DPCCH power may not be fully synchronized with the
current channel quality when the UE resumes data transmission
from the DTX cycle 2 state.
2-1536
SJ-20141209142030-013|2015-11-12 (R1.3)
The uplink power consumption and whether the DPCCH power can
Reason
be fully synchronized with the current channel quality when the

UE resumes data transmission from the DTX cycle 2 status are
considered for defining the default.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.11 CQI DTX Timer

Full Name
CQI DTX Timer
Abbreviated Name
cqiDtxTimer
Managed Object
3GPP Name
CQI DTX Timer
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the time period during which CQI reporting
has a higher priority than DTX. After the UE detects the HS-SCCH
transmitting non-HS-SCCH order information intended to itself or
successfully decodes an HS-PDSCH, it starts the CQI DTX timer.
When this timer is operating, CQI reporting has a higher priority
than DTX. When this timer is expired, CQI reporting has a lower
priority than DTX, meaning that CQI reporting can take place in
the non-DPCCH gap length only.
Instance
Service Related
ZWF26-01-007
2-1537
SJ-20141209142030-013|2015-11-12 (R1.3)
UL DTX
(0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, Infinity) subframe
Unit
subframe
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the time duration
during which CQI reports have higher priority than the DTX mode.
Configuration rule: The uplink power and the accuracy of channel
quality information obtained for downlink scheduling must be
considered during configuration.
A larger parameter means a longer time duration, which results
in increased uplink power but more accurate channel quality
information obtained for downlink scheduling.
A smaller parameter means a shorter time duration, which results
in decreased uplink power but less accurate channel quality
information obtained for downlink scheduling.
The default value is set based on the uplink power and the accuracy
Reason
of channel quality obtained for downlink scheduling.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2-1538
SJ-20141209142030-013|2015-11-12 (R1.3)
2.50.12 Inactivity Threshold for UE DRX Cycle

Full Name
Inactivity Threshold for UE DRX Cycle
Abbreviated Name
drxCycInactTrd
Managed Object
3GPP Name
Inactivity Threshold for UE DRX cycle
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

listens to the HS-SCCH status every "UE DRX cycle" subframes.
If the UE does not receive consistent control information within
continuous "Inactivity Threshold for UE DRX cycle" subframes, the
received TFRI value corresponds to the HS-SCCH transmitting
non-HS-SCCH order information, or the UE fails to decode the
HS-PDSCH intended to itself, it can switch to DRX status (meaning
that it listens to HS-SCCHs periodically).
Instance
Service Related
ZWF26-01-008
DL DRX
(0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512)subframe
Unit
subframe
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1539
SJ-20141209142030-013|2015-11-12 (R1.3)
for transferring the UE to the status of HS-SCCH monitoring every

UE DRX cycle subframes.
Configuration rule: The time used by the UE to transfer to
discontinuous reception and the accuracy of downlink discontinuous
transmission judgment must be considered during configuration.
A larger parameter indicates a longer duration of continuous
HS-SCCH monitoring every UE DRX cycle subframes. In this case,
longer time is required for the UE to transfer to the discontinuous
reception state, but the downlink discontinuous transmission
judgment is more accurate.
A smaller parameter indicates a shorter duration of continuous
HS-SCCH monitoring every UE DRX cycle subframes. In this case,
shorter time is required for the UE to transfer to the discontinuous
reception state, but the downlink discontinuous transmission
judgment is less accurate.
The default value is set based on the time used by the UE to
Reason
transit to discontinuous reception and the accuracy of downlink

discontinuous transmission judgment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.13 UE DRX Grant Monitoring

Full Name
UE DRX Grant Monitoring
Abbreviated Name
drxGrantMon
Managed Object
2-1540
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
UE DRX Grant Monitoring
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates whether the UE (in HS-SCCH DRX mode)

listens to the full E-AGCH of the E-DCH serving cell when the
beginning of the E-AGCH or E-RGCH transmission overlaps an
HS-SCCH reception subframe.
Instance
Service Related
ZWF26-01-008
DL DRX
0: False
1: True
Unit
N/A
Default Value
Non-realtime: True
Realtime: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates whether the UE (in
HS-SCCH DRX mode) listens to the full E-AGCH of the E-DCH

serving cell when the beginning of the E-AGCH or E-RGCH
transmission overlaps an HS-SCCH reception subframe.
Related factors: demodulation performance and the battery life of
the UE.
If the parameter value is set to False, the UE will receive part
E-AGCH or E-RGCH when the beginning of the E-AGCH or E-RGCH
overlaps with an HS-SCCH reception subframe. Compared with
the full reception of the E-AGCH or E-RGCH (the parameter value
is set to True), the part reception degrades both the demodulation
performance and the performance of uplink services obtaining
scheduling grants but prolongs the battery life of the UE.
The default value is set based on the demodulation performance
Reason
and the battery life of the UE.

2-1541
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.14 UE DRX Cycle for 10ms TTI

Full Name
UE DRX Cycle for 10ms TTI
Abbreviated Name
drxCycleTti10
Managed Object
3GPP Name
UE DRX cycle
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the period during which the UE listens to

HS-SCCHs when the E-DCH TTI is 10 ms. When the UE enters
downlink DRX status, it listens to HS-SCCHs every "UE DRX cycle"
subframes.
Instance
Service Related
ZWF26-01-008
DL DRX
(4, 5, 8, 10, 16, 20) subframe
Unit
subframe
Default Value
2-1542
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
UDtxDrxProfile.profileId
dtxCyc1Tti10
Parameters
drxCycleTti10 must be divisible by DtxCyc1Tti10, or dtxCyc1Tti10

must be divisible by drxCycleTti10.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the period during
which the UE listens to HS-SCCHs when the E-DCH TTI is 10 ms.

Related factors: the frequency of monitoring the HS-SCCH when
UE is in downlink discontinuous reception status, and the time that
UE takes for transition to the continuous reception status.
If the parameter is set to a large value, the UE monitors the
HS-SCCH at a low frequency when it is in downlink DRX, and takes
a long time for transition to continuous reception.
If the parameter is set to a small value, the UE monitors the
HS-SCCH at a high frequency when it is in downlink DRX status,
and takes a short time for transition to continuous reception.
The default value is set based on the frequency of monitoring the
Reason
HS-SCCH when the UE is in downlink DRX status and the time used
by the UE to transit to continuous reception.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.15 UE DRX Cycle for 2ms TTI

2-1543
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
UE DRX Cycle for 2ms TTI
Abbreviated Name
drxCycleTti2
Managed Object
3GPP Name
UE DRX cycle
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the period during which the UE listens

to HS-SCCHs when the E-DCH TTI is 2 ms. When the UE enters
downlink DRX status, it listens to HS-SCCHs every "UE DRX cycle"
subframes.
Instance
Service Related
ZWF26-01-008
DL DRX
(4, 5, 8, 10, 16, 20) subframe
Unit
subframe
Default Value
Related Parameters
UDtxDrxProfile.profileId
dtxCyc1Tti2
Parameters
drxCycleTti2 must be the interger multiple of dtxCyc1Tti2 or can be

intergerly divided by dtxCyc1Tti2.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1544
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the period during
which the UE listens to HS-SCCHs when the E-DCH TTI is 2 ms.

Related factors: the frequency of monitoring the HS-SCCH when
UE is in downlink discontinuous reception status, and the time that
UE takes for transition to the continuous reception status.
If the parameter is set to a large value, the UE monitors the
HS-SCCH at a low frequency when it is in downlink DRX, and takes
a long time for transition to continuous reception.
If the parameter is set to a small value, the UE monitors the
HS-SCCH at a high frequency when it is in downlink DRX status,
and takes a short time for transition to continuous reception.
The default value is set based on the frequency of monitoring the
Reason
HS-SCCH when the UE is in downlink DRX status and the time used
by the UE to transit to continuous reception.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.16 Inactivity Threshold for UE Grant Monitoring for 2ms TTIs

Full Name
Inactivity Threshold for UE Grant Monitoring for 2ms TTIs
Abbreviated Name
gMonInactTrd2
Managed Object
3GPP Name
Inactivity Threshold for UE Grant Monitoring
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-1545
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

shall monitor the full E-AGCH of the E-DCH serving cell and all
E-RGCH(s) of all cells in the E-DCH active set for the number of
"Inactivity Threshold for UE Grant Monitoring" TTIs in the case
of 2 ms E-TTI after the UE sends data through E-DCH under the
scheduling of the Node B.
Instance
Service Related
ZWF26-01-007
UL DTX
(0, 1, 2, 4, 8, 16, 32, 64, 128, 256 ) TTIs
Unit
TTIs
Default Value
Realtime: 32 TTIs
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
at which the UE shall monitor the full E-AGCH of the E-DCH serving
cell and all E-RGCH(s) of all cells in the E-DCH active set for the
number of "Inactivity Threshold for UE Grant Monitoring" TTIs in the
case of 2 ms E-TTI after the UE sends data through E-DCH under
the scheduling of the Node B.
timeliness.
If the parameter is set to a large value, more UE power will be
consumed, but data can be transmitted more timely.
If the parameter is set to a small value, less UE power will be
Reason
Change Take Effect
New Connection
No
2-1546
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.17 Inactivity Threshold for UE Grant Monitoring for 10ms TTIs

Full Name
Inactivity Threshold for UE Grant Monitoring for 10ms TTIs
Abbreviated Name
gMonInactTrd10
Managed Object
3GPP Name
Inactivity Threshold for UE Grant Monitoring
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the inactivity threshold at which the

UE listens to the full E-AGCH of the E-DCH serving cell and full
E-RGCHs of the E-DCH active set after the data on E-DCH is sent
when E-DCH TTI is 10 ms. After E-DCH is scheduled, the UE
listens to full E-AGCH of the E-DCH serving cell and full E-RGCHs
of the E-DCH active set in the "Inactivity Threshold for UE Grant
Monitoring" E-TTIs.
Instance
Service Related
ZWF26-01-007
UL DTX
(0, 1, 2, 4, 8, 16, 32, 64, 128, 256 ) TTIs
Unit
TTIs
Default Value
Realtime: 8 TTIs
Related Parameters
N/A
2-1547
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
for the UE to monitor the full E-AGCH in the E-DCH serving cell
and the full E-RGCH in the E-DCH active set after the E-DCH is
scheduled for data transmission in the case of 10 ms ETTI.
timeliness.
If the parameter is set to a large value, more UE power will be
consumed, but data can be transmitted more timely.
If the parameter is set to a small value, less UE power will be
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.18 MAC Inactivity Threshold for 2ms TTIs

Full Name
MAC Inactivity Threshold for 2ms TTIs
Abbreviated Name
macInaThre2
Managed Object
2-1548
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
MAC Inactivity Threshold
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the MAC inactivity threshold at which the

UE performs E-TFC selection every "MAC DTX cycle" TTIs when
E-DCH TTI is 2 ms. After the UE activates uplink DTX mode and
does not send data for continuous "MAC Inactivity Threshold-1"
E-DCH TTIs, it performs E-TFC selection every "MAC DTX cycle"
subframes.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 2, 4, 8, 16, 32, 64, 128, 256, 512, Infinity) TTIs
Unit
TTIs
Default Value
Realtime: 32 TTIs
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the MAC inactivity
threshold when E-DCH TTI is 2 ms. When the UL DTX mode is

active, if no E-DCH transmission has been performed for the number
of continuous E-TTIs indicated by this parameter minus 1, the UE
will perform E-TFC selection periodically every MAC DTX cycle.
timeliness.
If the parameter is set to a large value, the condition is stricter for
the UE to enter uplink DTX, more uplink power will be consumed,
but data can be transmitted more immediately.
If the parameter is set to a small value, the condition is less strict for
the UE to enter uplink DTX, less uplink power will be consumed, but
data transmission will be less immediately.
2-1549
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on the power consumption and data
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.19 MAC Inactivity Threshold for 10ms TTIs

Full Name
MAC Inactivity Threshold for 10ms TTIs
Abbreviated Name
macInaThre10
Managed Object
3GPP Name
MAC Inactivity Threshold
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the MAC Inactivity Threshold based on

which the UE performs E-TFC selection at intervals of the specified
number (determined by the MAC DTX cycle parameter) of TTIs
when the E-DCH TTI is 10 ms. After the UE activates uplink DTX
mode and does not send data for continuous "MAC Inactivity
Threshold-1" E-DCH TTIs, it performs E-TFC selection at intervals
determined by the specified number (determined by the MAC DTX
cycle parameter) of subframes.
Instance
Service Related
ZWF26-01-007
UL DTX

2-1550
SJ-20141209142030-013|2015-11-12 (R1.3)
(1, 2, 4, 8, 16, 32, 64, 128, 256, 512, Infinity) TTIs
Unit
TTIs
Default Value
Realtime: 8 TTIs
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the MAC Inactivity Threshold based
on which the UE performs E-TFC selection at intervals of the

specified number (determined by the MAC DTX cycle parameter) of
TTIs when the E-DCH TTI is 10 ms.
timeliness.
If the parameter is set to a greater value, the condition for the UE
to enter uplink DTX is stricter, more uplink power is consumed, and
data can be transmitted more immediately.
If the parameter is set to a small value, the condition for the UE to
enter uplink DTX is looser, less uplink power is consumed, and data
transmission is less immediately.
The default value is set based on the power consumption and data
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2-1551
SJ-20141209142030-013|2015-11-12 (R1.3)
2.50.20 UE DPCCH Burst_1 for 10ms TTI

Full Name
UE DPCCH Burst_1 for 10ms TTI
Abbreviated Name
burst1Tti10
Managed Object
3GPP Name
UE DPCCH burst_1
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the number of DPCCH subframes for the

radio link synchronization when E-TTI is 10 ms and the UE is in
DTX status controlled by UE DTX Cycle 1. When the UE is in DTX
status controlled by UE DTX Cycle 1, it sends a DPCCH burst every
"UE DTX Cycle 1" subframes. The length of the DPCCH burst
is UE DPCCH Burst_1.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 2, 5) subframe
Unit
subframe
Default Value
Related Parameters
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1552
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the number of DPCCH
subframes used for radio link synchronization when the UE is in

DTX mode controlled by UE DTX Cycle 1 and 10 ms E-TTI is used.
Configuration rule: The uplink power and the accuracy of
synchronization with the current channel must be considered during
configuration.
A larger parameter indicates a longer time for sending DPCCH
subframes during radio link synchronization in DTX mode controlled
by UE DTX Cycle 1, which results in higher uplink power and more
accurate synchronization with the current channel.
A smaller parameter indicates a shorter time for sending DPCCH
by UE DTX Cycle 1, which results in lower uplink power and less
Reason
of synchronization with the current channel.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A

Full Name
Abbreviated Name
burst1Tti2
Managed Object
3GPP Name
UE DPCCH burst_1
2-1553
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

radio link synchronization when E-TTI is 2 ms and the UE is in DTX
status controlled by UE DTX Cycle 1. When the UE is in DTX status
controlled by UE DTX Cycle 1, it sends a DPCCH burst every "UE
DTX Cycle 1" subframes. The length of the DPCCH burst is UE
DPCCH Burst_1.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 2, 5) subframe
Unit
subframe
Default Value
Related Parameters
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
subframes used for radio link synchronization when the UE is in

DTX mode controlled by UE DTX Cycle 1 and 2ms E-TTI is used.
synchronization with the the current channel quality must be
considered during configuration.
accurate synchronization with the current channel quality.
accurate synchronization with the current channel quality.
2-1554
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A

Full Name
Abbreviated Name
burst2Tti10
Managed Object
3GPP Name
UE DPCCH burst_2
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

radio link synchronization when E-TTI is 10 ms and the UE is in
DTX status controlled by UE DTX Cycle 2. When the UE is in DTX
status controlled by UE DTX Cycle 2, it sends a DPCCH burst every
"UE DTX Cycle 2" subframes. The length of the DPCCH burst
is UE DPCCH Burst_2.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 2, 5) subframe
2-1555
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
subframe
Default Value
Related Parameters
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
subframes used for radio link synchronization when the UE is in DTX

mode controlled by UE DTX Cycle 2 and an E-TTI of 10 ms is used.
configuration.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2-1556
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
burst2Tti2
Managed Object
3GPP Name
UE DPCCH burst_2
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description

radio link synchronization when E-TTI is 2 ms and the UE is in DTX
status controlled by UE DTX Cycle 2. When the UE is in DTX status
controlled by UE DTX Cycle 2, it sends a DPCCH burst every "UE
DTX Cycle 2" subframes. The length of the DPCCH burst is UE
DPCCH Burst_2.
Instance
Service Related
ZWF26-01-007
UL DTX
(1, 2, 5) subframe
Unit
subframe
Default Value
Related Parameters
Parameters
Burst2Tti2 must be smaller than or equal to DtxCyc2Tti2.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1557
SJ-20141209142030-013|2015-11-12 (R1.3)
subframes used for radio link synchronization when the UE is in DTX

mode controlled by UE DTX Cycle 2 and an E-TTI of 2 ms is used.
configuration.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
Configuration
N/A
N/A
2.50.24 The HSPA Evolution Function Indication When CPC is

Activated
Full Name
The HSPA Evolution Function Indication When CPC is Activated
Abbreviated Name
cpcHspaEInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1558
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
The parameter indicates whether and which HSPA evolution function

is activated when the CPC function is activated. Each value of this
parameter relates to a different configuration of the parameters
in UDtxDrx. When the CPC is activated, the configuration of the
parameters in UDtxDrx should be got according to whether the other
HSPA evolution function (3C/4C/MF-3C/MF-4C) is activated. When
3C or 4C or MF-3C or MF-4C is activated, the configuration of the
parameters in UDtxDrx should be got according to cpcHspaEInd=1,
otherwise, the configuration of the parameters in UDtxDrx should be
got according to cpcHspaEInd=0.
Instance
RNC
ZWF26-01-007
UL DTX
0: 3C/4C/MF-3C/MF-4C is not activated

1: 3C/4C/MF-3C/MF-4C is activated
Unit
N/A
Default Value
DtxDrx
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter Function: The parameter indicates whether and which
HSPA evolution function is activated when the CPC function is

activated.
be modified.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
2-1559
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
restriction
OMC Access path
Configuration
Add
2.50.25 CQI Feedback Cycle When CPC is Activated and Uplink

2ms TTI
Full Name
CQI Feedback Cycle When CPC is Activated and Uplink 2ms TTI
Abbreviated Name
cqiCycleCpcTti2
Managed Object
3GPP Name
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the CQI feedback cycle when CPC function
is activated and the uplink TTI is 2ms, and it is used to determine
the time to send a CQI. The value 0 indicates that the UE does not
perform channel quality feedback.
HSDPA users.
Instance
RNC
ZWF26-01-007
UL DTX
(0, 2, 4, 8, 10, 20, 40, 80, 160, 16, 32, 64) ms
Unit
ms
2-1560
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
When cpcHspaEInd=0: [2,8,8]ms

Related Parameters
dtxCyc2Tti2, cqiRepFacCpcTti2, cpcHspaEInd, UDtxDrxProfile.profileId
Under same UDtxDrxProfile.profileId:
Parameters
1.If cpcHspaEInd is 0 and cqiCycleCpcTti2[0] is not 0, the physical

value of cqiCycleCpcTti2[0] is greater than or equal to the double
of cqiRepFacCpcTti2[0].
2. If cpcHspaEInd is 0 andcqiCycleCpcTti2[1] is not 0, the physical
4. If cpcHspaEInd is 1 and cqiCycleCpcTti2[0] is not 0, the
physical value of cqiCycleCpcTti2[0] is greater than or equal to the
4*cqiRepFacCpcTti2[0].
5. If cpcHspaEInd is 1 andcqiCycleCpcTti2[1] is not 0, the
7. Under the same cpcHspaEInd, cqiCycleCpcTti2[0]<=
cqiCycleCpcTti2[1] <= cqiCycleCpcTti2[2].
8. Under the same cpcHspaEInd, dtxCyc2Tti2 must be divisible
by one-half cqiCycleCpcTti2 (cqiCycleCpcTti2/2), or one-half
cqiCycleCpcTti2 (cqiCycleCpcTti2/2) must be divisible by
dtxCyc2Tti2. cqiCycleCpcTti2 contains three elements. Each
of them must have the preceding constraint relationships with
dtxCyc2Tti2.
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1561
SJ-20141209142030-013|2015-11-12 (R1.3)
cycle.
Reason
Change Take Effect

Request)
No
How to Impact
N/A
Access
read/write
OMC Access path
Configuration
Add
2.50.26 CQI Repetition Factor When CPC is Activated and Uplink

2ms TTI
Full Name
CQI Repetition Factor When CPC is Activated and Uplink 2ms TTI
Abbreviated Name
cqiRepFacCpcTti2
Managed Object
3GPP Name
2-1562
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the CQI repetition factor when CPC

function is activated and the uplink TTI is 2ms, which is the number
of consecutive repetitions of the same CQI.
Element 1: low load
HSDPA users.
Instance
RNC
ZWF26-01-007
UL DTX
1..4
Unit
N/A
Default Value
When cpcHspaEInd=0: [1 1 1]
Related Parameters
cqiCycleCpcTti2, cpcHspaEInd, UDtxDrxProfile.profileId
Parameters
1. If cpcHspaEInd is 0 and cqiCycleCpcTti2[0] is not 0, the physical

2-1563
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
factor.
Reason
quality.
Change Take Effect

Request)
No
How to Impact
N/A
Access
read/write
OMC Access path
Configuration
Add
2.50.27 CQI Feedback Cycle When CPC is Activated and Uplink

10ms TTI
Full Name
CQI Feedback Cycle When CPC is Activated and Uplink 10ms TTI
Abbreviated Name
cqiCycleCpcTti10
Managed Object
2-1564
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the CQI feedback cycle when CPC function
is activated and the uplink TTI is 10ms, and it is used to determine
the time to send a CQI. The value 0 indicates that the UE does not
perform channel quality feedback.
HSDPA users.
Instance
RNC
ZWF26-01-007
UL DTX
(0, 2, 4, 8, 10, 20, 40, 80, 160, 16, 32, 64) ms
Unit
ms
Default Value

Related Parameters
dtxCyc2Tti10, cqiRepFacCpcTti10, cpcHspaEInd, UDtxDrxProfile.profileId
Parameters

double of cqiRepFacCpcTti10[1].
2-1565
SJ-20141209142030-013|2015-11-12 (R1.3)

physical value of cqiCycleCpcTti10[2] is greater than or equal to
the 4*cqiRepFacCpcTti10[10].
8. Under the same cpcHspaEInd, dtxCyc2Tti10 must be
divisible by one-half cqiCycleCpcTti10 (cqiCycleCpcTti10/2), or
one-half cqiCycleCpcTti10 (cqiCycleCpcTti10/2) must be divisible
dtxCyc10Tti10.
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
cycle.
Reason
Change Take Effect

Request)
No
How to Impact
N/A
Access
read/write
2-1566
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Configuration
Add
2.50.28 CQI Repetition Factor When CPC is Activated and Uplink

10ms TTI
Full Name
CQI Repetition Factor When CPC is Activated and Uplink 10ms TTI
Abbreviated Name
cqiRepFacCpcTti10
Managed Object
3GPP Name
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the CQI repetition factor when CPC

function is activated and the uplink TTI is 10ms, which is the number
of consecutive repetitions of the same CQI.
Element 1: low load
HSDPA users.
Instance
RNC
ZWF26-01-007
UL DTX
1..4
Unit
N/A
Default Value
Related Parameters
cqiCycleCpcTti10, cpcHspaEInd, UDtxDrxProfile.profileId
2-1567
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
factor.
Reason
quality.
Change Take Effect

Request)
No
2-1568
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Configuration
Add
2.51 Power Control Profile Related to

Service(USrvPcProfile)
2.51.1 Power Control Profile Related to Service Object ID
Full Name
Power Control Profile Related to Service Object ID
Abbreviated Name
USrvPcProfileId
Managed Object
Power Control Profile Related to Service(USrvPcProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the service-related power

control profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-1569
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Service Function->Power Control Profile
Related to Service
N/A
N/A
2.51.2 Service Related Power Control Profile ID

Full Name
Service Related Power Control Profile ID
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the ID of the service-related power control

parameter profile. A profile corresponds to a set of service-related
power control parameters. Each cell obtains service-related power
control parameters according to this parameter.
Instance
UTRAN Cell and Service Related
ZWF21-04-009
Power Control
Power Control FG
2-1570
SJ-20141209142030-013|2015-11-12 (R1.3)
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
Parameters
1.If cpcHspaEInd is 0 and cqiCycleCpcTti2[0] is not 0, the physical

8. Under the same cpcHspaEInd, dtxCyc2Tti2 must be divisible
by one-half cqiCycleCpcTti2 (cqiCycleCpcTti2/2), or one-half
cqiCycleCpcTti2 (cqiCycleCpcTti2/2) must be divisible by
dtxCyc2Tti2.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter is the ID of the service-related
power control parameter profile.

Adjustment suggestion: This parameter is automatically generated,
and cannot be modified.
N/A
Reason
2-1571
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
Related to Service
N/A
N/A

Full Name
Initial Load Scene
Abbreviated Name
intialloadscene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial load scene for the parameters in
SrvPcProfile. In normal load scene, the service quality is high. In
high load scene, in order to increase system capacity, the service
quality will be lower than that in normal load scene.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Power Control FG
0: Normal Load Cell

1: High Load Cell
Unit
N/A
Default Value
Related Parameters
N/A
2-1572
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the initial load scene
for the parameters in SrvPcProfile.

Related factors: based on service quality and system capacity
that can be provided by the power control parameters in the
USrvPcProfile.
If the service quality is poor but the system capacity is high, the
value is set to high load scene. If the service quality is good but the
system capacity is low, the value is set to normal load scene.
Most of cells are normal load cells.
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
2-1573
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Related to Service
N/A
N/A
2.52 Power Control Related to Service(USrvPc)

2.52.1 Power Control Related to Service Object ID
Full Name
Power Control Related to Service Object ID
Abbreviated Name
USrvPcId
Managed Object
Power Control Related to Service(USrvPc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the service-related power

control.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
Parameters

2-1574
SJ-20141209142030-013|2015-11-12 (R1.3)

8. Under the same cpcHspaEInd, dtxCyc2Tti10 must be
divisible by one-half cqiCycleCpcTti10 (cqiCycleCpcTti10/2), or
one-half cqiCycleCpcTti10 (cqiCycleCpcTti10/2) must be divisible
dtxCyc10Tti10.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Related to Service->Power Control Related to Service
N/A
N/A
2-1575
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.2 Sub-service Type

Full Name
Sub-service Type
Abbreviated Name
srvType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the type of sub-services. It is used to

number each sub-service.0..5 are used for signaling services and
6..250 are used for single services. Odd numbers are configured
for downlink services and even numbers are configured for uplink
services.
Instance

ZWF21-04-009
ZWF23-01-041
Power Control
Enhanced F-DPCH
Power Control FG
0..65534
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
Parameters

2-1576
SJ-20141209142030-013|2015-11-12 (R1.3)

Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter identifies the type of a service.
Related factors: 0..5 are used for signaling services and 6..250 are
used for single services.Odd numbers are configured for downlink
services and even numbers are configured for uplink services.IDs
vary with different services.
be modified.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2.52.3 Uplink Inner Loop Power Control Algorithm

Full Name
Uplink Inner Loop Power Control Algorithm
Abbreviated Name
ulIlPcAlg
Managed Object
2-1577
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Power Control Algorithm
3GPP Reference
TS 25.331
Description
This parameter indicates which uplink inner loop power control

algorithm is used. In the case of algorithm 1, inner loop power
control is performed every time slot. In the case of algorithm 2, inner
loop power control is performed every 5 time slots.
Instance
ZWF21-04-009
Power Control
Power Control FG
1: Algorithm 1
2: Algorithm 2
Unit
N/A
Default Value
Algorithm 1
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates which uplink inner
loop power control algorithm is used. In the case of algorithm 1,

inner loop power control is done every time slot. In the case of
algorithm 2, inner loop power control is done every 5 time slots.
Related factors: wireless scenario.
Algorithm 1 is suit for the quick channel fading wireless scenario.
Algorithm 2 is suit for the slow channel fading wireless scenario.
The wireless environment is considered.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
2-1578
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.52.4 Step Size of Uplink Inner Loop Power Control

Full Name
Step Size of Uplink Inner Loop Power Control
Abbreviated Name
tpcStepSize
Managed Object

3GPP Name
TPC step size
3GPP Reference
TS 25.331
Description
This parameter indicates the adjustment step for uplink inner loop
power control. It needs to be configured, only when algorithm 1 is
selected for uplink inner loop power control. Because the default
step in algorithm 2 is 1, this parameter is not needed.
Instance
ZWF21-04-009
Power Control
Power Control FG
(1, 2)dB
Unit
dB
Default Value
1dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1579
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the adjustment step
for uplink inner loop power control.

If the parameter value is too large, the power may be decreased to
a low level that affects service quality, and may be increased to a
high level that wastes the power resource and decreases system
capacity.
If the parameter value is too small, the power may be decreased
so slow that the power resource is wasted and system capacity
is affected, and may be increased so slow that service quality is
affected.
Service quality and system capacity are considered.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.5 Uplink SIR Target Up Step Size

Full Name
Uplink SIR Target Up Step Size
Abbreviated Name
ulSirTargUpStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1580
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the step for increasing the SIR target
of uplink outer loop power control. To restore communication
quality as soon as possible when the communication environment
worsens and to lower the communication quality slowly (to make it
more reliable) when the environment improves, the increasing and
decreasing steps are set asymmetrically and separately.
This parameter is a 9-tuple. Each element is used for different load
levels and user priorities as follows:
Element 1: low load and golden-level user
Element 2: low load and silver-level user
Element 3: low load and bronze-level user
Element 4: medium load and golden-level user
Element 5: medium load and silver-level user
Element 6: medium load and bronze-level user
Element 7: high load and golden-level user
Element 8: high load and silver-level user
Element 9: high load and bronze-level user
Instance
ZWF21-04-009
ZWF21-04-016
ZWF21-04-013
Power Control
Power Control FG / Load Adaptive Power Control FG / Power

Control Algorithm Enhancement FG
(0.1..0.5)dB, step 0.1dB
Unit
dB
Default Value
TrfPc
Related Parameters
srvType, MaxSirTargUpStep
For uplink services,
Parameters
UlSirTargUpStep[0] <= MaxSirTargUpStep[0];

UlSirTargUpStep[8] <= MaxSirTargUpStep[8]
Data Type
double[DBS_RR_MAX_NUM_LOADARPLEVEL]
2-1581
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the step for increasing
the SIR target of uplink outer loop power control.

If the value is too high, the SIR target may be exaggerated, and
the power resource may be wasted and thus the system capacity
is reduced.
If the value is too low, the SIR target is increased slowly, which
reduces service quality.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.6 Uplink SIR Target Down Step Size

Full Name
Uplink SIR Target Down Step Size
Abbreviated Name
ulSirTargDnStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1582
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the step for decreasing the SIR target
of uplink outer loop power control. To restore communication
quality as soon as possible when the communication environment
worsens and to lower the communication quality slowly (to make it
more reliable) when the environment improves, the increasing and
decreasing steps are set asymmetrically and separately.
Instance
ZWF21-04-009
ZWF21-04-016
ZWF21-04-013
Power Control
Power Control FG / Load Adaptive Power Control FG / Power

Control Algorithm Enhancement FG
(0.1..0.5)dB, step 0.1dB
Unit
dB
Default Value
TrfPc
Related Parameters
srvType, maxSirTargDnStep
Parameters
ulSirTargDnStep[0] <= maxSirTargDnStep[0];

ulSirTargDnStep[8] <= maxSirTargDnStep[8].
Data Type
2-1583
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the step for
decreasing the SIR target of uplink outer loop power control.

If the value is too high, the SIR target may be decreased to a low
level that affects the service quality.
If the value is too low, when the SIR target is decreased slowly,
the power resource may be wasted and thus the system capacity
is reduced.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.7 Uplink SIR Target Maximum Down Step Size

Full Name
Uplink SIR Target Maximum Down Step Size
Abbreviated Name
maxSirTargDnStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1584
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum step for decreasing the SIR
target of uplink outer loop power control.
Instance
ZWF21-04-009
ZWF21-04-013
Power Control
Power Control FG / Load Adaptive Power Control FG
(0.1..1)dB, step 0.1dB
Unit
dB
Default Value
0.6 dB
Related Parameters
srvType, ulSirTargDnStep, swchAdaptiveStep
Parameters

ulSirTargDnStep[8] <= maxSirTargDnStep[8].
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1585
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the maximum step for
decreasing the SIR target of uplink outer loop power control.

If the value is too high, the decreasing accuracy is affected, which
results in reduced demodulation performance, and thus service
quality is reduced.
If the value is too low, the decreasing speed is slow, which affects
If swchAdaptiveStep is set to 0, the parameter is invalid.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.8 Uplink SIR Target Maximum Up Step Size

Full Name
Uplink SIR Target Maximum Up Step Size
Abbreviated Name
maxSirTargUpStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1586
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum step size for increasing the
uplink SIR target.
Instance
ZWF21-04-009
ZWF21-04-013
Power Control
(0.1..1)dB, step 0.1dB
Unit
dB
Default Value
UL services and signalling with the maximum bit rate no more than
384 kbps: 0.6dB;
Others: 0.3dB
Related Parameters
SrvType, UlSirTargUpStep
For uplink services:
Parameters

UlSirTargUpStep[8] <= MaxSirTargUpStep[8].
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1587
SJ-20141209142030-013|2015-11-12 (R1.3)
increasing the uplink SIR target.

If the value is too high, the SIR target increase step size is larger
when consecutive error TBs or consecutive SIR target increase
occurs. Accordingly, the service quality is improved, but the system
capacity is affected.
If the value is too low, the SIR target increase step size is small
occurs. Accordingly, the system capacity is increased, but the
service quality is affected.
The default value is set based on the service quality and the system
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.9 Step Size of Downlink Inner Loop Power Control

Full Name
Step Size of Downlink Inner Loop Power Control
Abbreviated Name
tpcDlStep
Managed Object

3GPP Name
FDD TPC Downlink Step Size;
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the adjustment step for downlink inner

loop power control. Normally, the value is smaller in good channel
conditions than in bad channel conditions.
2-1588
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-04-009
Power Control
Power Control FG
(0.5[0], 1[1], 1.5[2], 2[3])dB
Unit
dB
Default Value
1dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
for downlink inner loop power control.

If the parameter value is too large, the power may be decreased to
a low level that affects service quality, and may be increased to a
high level that wastes the power resource and affects the system
capacity.
If the parameter value is too small, the power may be decreased
so slow that the power resource is wasted and system capacity
is affected, and may be increased so slow that service quality is
affected.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1589
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.52.10 BLER Target

Full Name
BLER Target
Abbreviated Name
blerTarget
Managed Object

3GPP Name
BLER Quality value; BLER
3GPP Reference
TS 25.331;
TS 25.423
Description
This parameter indicates the Block Error Ratio (BLER) target of

a transport channel, and is the benchmark for outer loop power
control. In the case of a service with multiple subflows, this
parameter is applicable to the first subflow.
The signaling value is Log10 (transport channel BLER quality
target). That is, the physical value P in TS 25.331 is Log10 (actual
value); the scalar value D in TS 25.331 is P*10; the value configured
in the database is D+63; the actual value configured on the OMCR
is 10^P, and is listed in exponential form, refer to the table in value
range.
Calculation method:
BLEREVAL=1: 63;
BLER=10.^ ( (BLEREVAL-63)/10);
S=[BLEREVAL; BLER]'
Instance

ZWF21-04-009
ZWF21-04-013
2-1590
SJ-20141209142030-013|2015-11-12 (R1.3)
Power Control
BLERtarget Value Range
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_LOADARPLEVEL]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the Block Error Ratio
(BLER) target of a service.

If the value is high, the system capacity is increased but the service
If the value is low, the service quality is improved but the system
capacity is decreased.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1591
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.11 Error Transport Block Number Threshold

Full Name
Error Transport Block Number Threshold
Abbreviated Name
errorThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the error transport block number threshold

in outer loop power control that uses the threshold algorithm. If the
number of error blocks exceeds the threshold within a period, the
RNC increases the SIR target immediately.
Instance
ZWF21-04-009
ZWF21-04-013
Power Control
(1..50)TBs, step 1TB
Unit
TBs
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
2-1592
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: This parameter indicates the error transport
block number threshold in outer loop power control that uses the
threshold algorithm.
If the parameter value is large, it is difficult to trigger the increase of
the target SIR, which decreases the service quality but increases
If the parameter value is small, it is easy to trigger the increase of
the target SIR, which improves the service quality but reduces the
system capacity.
Reason
capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.12 Tolerance BLER Period

Full Name
Tolerance BLER Period
Abbreviated Name
blerAccpPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1593
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the error block tolerance period in outer

loop power control that uses the threshold algorithm. If the tolerance
period does not expire but the number of error blocks is larger than
the error block threshold, the Signal-to-Interference Ratio (SIR)
target is increased. If the tolerance period expires and the number
of error blocks is smaller than the error block threshold, the SIR
target is decreased. Otherwise, the SIR target is not adjusted.
Instance
ZWF21-04-009
ZWF21-04-013
Power Control
(1..65535)TBs, step 1TBs
Unit
TBs
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1594
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the error block
tolerance period in outer loop power control that uses the threshold
algorithm.
If the parameter value is large, it is difficult to trigger the decrease of
the target SIR, which increases the service quality but decreases
If the parameter value is small, it is easy to trigger the decrease of
the target SIR, which reduces the service quality but improves the
system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.13 Threshold of HARQ Failure Indication Number to Adjust

SIR Target Upward (2ms E-TTI)
Full Name
Threshold of HARQ Failure Indication Number to Adjust SIR Target

Upward (2ms E-TTI)
Abbreviated Name
thrHarqFailTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1595
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the threshold of HARQ failure number

for increasing the SIR target when E-TTI is 2 ms. If the number of
HARQ failures exceeds the threshold within the time window, the
RNC increases the SIR target. It is applicable to the services carried
on the E-DCH.
Instance
ZWF25-04-006
ZWF21-04-013

HSUPA Introduction FG / Load Adaptive Power Control FG
0..255
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1596
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the threshold of HARQ
failure number for increasing the SIR target when E-TTI is 2 ms.
system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Upward (10ms E-TTI)
Abbreviated Name
thrHarqFailTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1597
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the threshold of HARQ failure number for

increasing the SIR target when E-TTI is 10 ms. If the number of
HARQ failures exceeds the threshold within the time window, the
RNC increases the SIR target. It is applicable to the services carried
on the E-DCH.
Instance
ZWF25-04-006
ZWF21-04-013

0..255
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1598
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the threshold of HARQ
failure number for increasing the SIR target when E-TTI is 10 ms.
system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.15 NHR Threshold to Adjust SIR Target Upward (10ms E-TTI)

Full Name
NHR Threshold to Adjust SIR Target Upward (10ms E-TTI)
Abbreviated Name
nhrThrUpTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1599
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the NHR threshold for increasing the SIR
target when E-TTI is 10 ms. If the NHR is larger than the threshold,
the RNC increases the SIR target. It is applicable to the services
carried on the E-DCH.
Instance

ZWF25-04-006
ZWF21-04-013

(0..15), step 0.01
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
nhrThrDownTti10, srvType
Parameters
nhrThrDownTti10[0] <= nhrThrUpTti10[0];

NhrThrUpTti10 [0]<= NhrThrUpTti10 [1]<= NhrThrUpTti10 [2];
2-1600
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the Number of HARQ Retransmissions
(NHR) threshold for increasing the SIR target when E-TTI is 10 ms.
system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.16 NHR Threshold to Adjust SIR Target Downward (10ms

E-TTI)
Full Name
NHR Threshold to Adjust SIR Target Downward (10ms E-TTI)
Abbreviated Name
nhrThrDownTti10
Managed Object

3GPP Name
N/A
2-1601
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the Number of HARQ Retransmissions

(NHR) threshold for decreasing the SIR target when E-TTI is 10 ms.
If the NHR is smaller than the threshold, the RNC decreases the
SIR target. It is applicable to the services carried on the E-DCH.
Instance

ZWF25-04-006
ZWF21-04-013

(0..15), step 0.01
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
nhrThrUpTti10, srvType
Parameters

NhrThrDownTti10 [0]<= NhrThrDownTti10 [1]<= NhrThrDownTti10
[2];
[5];
2-1602
SJ-20141209142030-013|2015-11-12 (R1.3)

[8];
[6];
[7];
[8].
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the Number of HARQ Retransmissions
If the parameter value is large, it is easy to trigger the decrease
of the target SIR, which reduces the service quality but increases
If the parameter value is small, it is difficult to trigger the decrease
of the target SIR, which improves the service quality but reduces
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

2-1603
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
nhrThrUpTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the NHR threshold for increasing the SIR
target when E-TTI is 2 ms. If the NHR is larger than the threshold,
the RNC increases the SIR target. It is applicable to the services
carried on the E-DCH.
Instance
ZWF25-04-006
ZWF21-04-013

(0..15), step 0.01
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
nhrThrDownTti2, srvType
2-1604
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

NhrThrUpTti2 [2]<= NhrThrUpTti2 [5]<= NhrThrUpTti2 [8].
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the Number of HARQ
Retransmissions (NHR) threshold for increasing the SIR target

when E-TTI is 2 ms.
system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1605
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.52.18 NHR Threshold to Adjust SIR Target Downward (2ms E-TTI)

Full Name
Abbreviated Name
nhrThrDownTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

If the NHR is smaller than the threshold, the RNC decreases the
SIR target. It is applicable to the services carried on the E-DCH.
Instance
ZWF25-04-006
ZWF21-04-013

(0..15), step 0.01
Unit
N/A
2-1606
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
TrfPcLoadScene
Related Parameters
nhrThrUpTti2, srvType
Parameters

NhrThrUpTti2 [2]<= NhrThrUpTti2 [5]<= NhrThrUpTti2 [8].
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Retransmissions (NHR) threshold for decreasing the SIR target

when E-TTI is 2 ms.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1607
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.52.19 Threshold of Sample Number to Adjust SIR Target Upward

(10ms E-TTI)
Full Name
Threshold of Sample Number to Adjust SIR Target Upward (10ms

E-TTI)
Abbreviated Name
upThrSampNumTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum sample number for increasing

the SIR target when E-TTI is 10 ms. The SIR target cannot be
increased unless the sample number is larger than or equal to the
threshold. When HARQ retransmission (including when the number
of HARQ retransmissions is 0) or failure is recorded once, a sample
is obtained.
Instance
ZWF25-04-006
ZWF21-04-013

2-1608
SJ-20141209142030-013|2015-11-12 (R1.3)
0..255
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the minimum sample number for
increasing the SIR target when E-TTI is 10 ms.

system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1609
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.20 Threshold of Sample Number to Adjust SIR Target

Downward (10ms E-TTI)
Full Name
Threshold of Sample Number to Adjust SIR Target Downward

(10ms E-TTI)
Abbreviated Name
dwThrSampNumTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum sample number for

decreasing the SIR target when E-TTI is 10 ms. The SIR target
cannot be decreased unless the sample number is larger than or
equal to the threshold. When HARQ retransmission (including when
the number of HARQ retransmissions is 0) or failure is recorded
once, a sample is obtained.
Instance

ZWF25-04-006
ZWF21-04-013

0..255
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
2-1610
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the minimum sample
number for decreasing the SIR target when E-TTI is 10 ms.

system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

(2ms E-TTI)
Full Name

E-TTI)
Abbreviated Name
upThrSampNumTti2
Managed Object

2-1611
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description

the SIR target when E-TTI is 2 ms. The SIR target cannot be
increased unless the sample number is larger than or equal to the
threshold. When HARQ retransmission (including when the number
of HARQ retransmissions is 0) or failure is recorded once, a sample
is obtained.
Instance
ZWF25-04-006
ZWF21-04-013

0..255
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1612
SJ-20141209142030-013|2015-11-12 (R1.3)
number for increasing the SIR target when E-TTI is 2 ms.

system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Threshold of Sample Number to Adjust SIR Target Downward (2ms

E-TTI)
Abbreviated Name
dwThrSampNumTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1613
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

decreasing the SIR target when E-TTI is 2 ms. The SIR target
cannot be decreased unless the sample number is larger than or
equal to the threshold. When HARQ retransmission (including when
the number of HARQ retransmissions is 0) or failure is recorded
once, a sample is obtained.
Instance
ZWF25-04-006
ZWF21-04-013

0..255
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1614
SJ-20141209142030-013|2015-11-12 (R1.3)
number for decreasing the SIR target when E-TTI is 2 ms.

system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.23 Physical Channel BER Target For Normal Mode

Full Name
Physical Channel BER Target For Normal Mode
Abbreviated Name
qePhyBerTarNorm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1615
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the BER target for a physical channel

outside the Valid Time Windows when the FP Mode is normal. It
is the base of the outer loop power control method that uses the
physical channel BER. If QE-Selector is "Selected" and a transport
channel BER is available, the transport channel BER is the base of
uplink data frame Quality Estimation (QE). If no transport channel
BER is available for the selected DCH, the physical channel BER is
used for QE. If QE-Selector is set to "Non-selected", the physical
channel BER is used for uplink data frame QE. When mixed
services are used, the combined method takes the minimum value
among all the qePhyBerTarNorm values of the mixed services, and
signaling is excluded.
Instance
N/A
N/A
(0..100)%, step 0.1%
Unit
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the BER target for
a physical channel outside the Valid Time Windows when the

FP Mode is normal. It is the base of the outer loop power control
method that uses the physical channel BER.
of the SIR target. Accordingly, system capacity is increased but
If the parameter value is small, it is difficult to trigger the decrease of
the SIR target. Accordingly, service quality is improved but system
Reason
2-1616
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.24 Physical Channel BER Target For Silent Mode

Full Name
Physical Channel BER Target For Silent Mode
Abbreviated Name
qePhyBerTarSil
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

within the valid time window when the FP mode is silent. The
BER target is used in outer loop power control based on Quality
Estimation (QE). If QE-Selector is "Selected" and a transport
channel BER is available, the transport channel BER is the base
of uplink data frame QE. If no transport channel BER is available
for the selected DCH, the physical channel BER is used for QE. If
QE-Selector is set to "Non-selected", the physical channel BER is
used as a basis for estimating the quality of uplink data frames. If
mixed services are used, the minimum value in qePhyBerTarSil of
each service is combined, and signaling is excluded.
2-1617
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
ZWF21-04-009
ZWF21-04-013
Power Control
(0..100)%, step 0.1%
Unit
Default Value
TrfPcLoadScene
Related Parameters
minBerTarge, maxBerTarget
minBerTarge<= qePhyBerTarSil<= maxBerTarget
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the BER target for a
physical channel within the valid time window when the FP mode
is silent. The BER target is used in outer loop power control based
on QE.
Reason
capacity.
Change Take Effect
No
2-1618
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.25 The Number Threshold of Physical Channel BER Less Than

or Equal BER Target
Full Name
The Number Threshold of Physical Channel BER Less Than or

Equal BER Target
Abbreviated Name
qeCntThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
the physical channel BER is less than or equal to the BER target
in the QE-based uplink outer loop power control algorithm. If the
number of times that the physical channel BER is less than or equal
to the BER target is greater than or equal to the threshold, the RNC
decreases the SIR target immediately.
Instance
2-1619
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-009
ZWF21-04-013
Power Control
1..20
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the threshold for the number of times
that the physical channel BER is less than or equal to the BER
target in the QE-based uplink outer loop power control algorithm.
system capacity.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1620
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.52.26 Error Transport Block Number Threshold for BER Target

Adjust in Fast OLPC SIR Target Downward Adjustment Based
on BER
Full Name
Error Transport Block Number Threshold for BER Target Adjust in

Fast OLPC SIR Target Downward Adjustment Based on BER
Abbreviated Name
berErrorTbThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the error block number threshold for BER
target adjustment in the fast BER-based SIR target downward
adjustment algorithm for outer loop power control. If the number of
error blocks is larger than the threshold within a period, the BER
target is decreased.
Instance
N/A
N/A
Unit
TBs
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1621
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.27 Transport Block Number Threshold for BER Target Adjust

in Fast OLPC SIR Target Downward Adjustment Based on
BER
Full Name
Transport Block Number Threshold for BER Target Adjust in Fast

OLPC SIR Target Downward Adjustment Based on BER
Abbreviated Name
berTbThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

for BER target adjustment in the fast BER-based SIR target
downward adjustment algorithm for outer loop power control. If
the transport block number is larger than neither berTbThresh
nor berErrorTbThresh, the BER target is kept. If the transport
block number is larger than berTbThresh but not larger than
berErrorTbThresh, the BER target is adjusted according to the
cause for triggering the BER target adjustment: If the triggering
cause is receiving an instruction for increasing the SIR target, the
BER target is decreased; otherwise, the BER target is increased.
Instance

2-1622
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
Unit
TBs
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.28 BER Target Down Step Size in Fast OLPC SIR Target
Downward Adjustment Based on BER
Full Name
BER Target Down Step Size in Fast OLPC SIR Target Downward
2-1623
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
berTargDnStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER target decrease step in the fast
BER-based SIR target downward adjustment algorithm for outer
loop power control. When the channel quality worsens, the BER
target is decreased according to this step to reduce the possibility
that the BER-based outer loop power control algorithm triggers the
decrease of the SIR target.
Instance
N/A
N/A
0..50
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1624
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.52.29 BER Target Up Step Size in Fast OLPC SIR Target

Downward Adjustment Based on BER
Full Name
BER Target Up Step Size in Fast OLPC SIR Target Downward

Abbreviated Name
berTargUpStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER target increase step in the fast
loop power control. When the channel quality improves, the BER
target is increased according to this step to increase the possibility
that the BER-based outer loop power control algorithm triggers the
decrease of the SIR target.
Instance
N/A
N/A
0..50
Unit
N/A
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-1625
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Switch
Full Name
Uplink Outer Loop PC SIR Target Adaptive Down Step Size Switch
Abbreviated Name
swchAdaptiveStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the adaptive downward SIR target

adjustment step is used in uplink outer loop power control.
2-1626
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
ZWF21-04-009
ZWF21-04-013
Power Control
0: Off
1: On
Unit
N/A
Default Value
0, 0, 0, 0, 0, 0, 0, 0, 0
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the adaptive
downward SIR target adjustment step is used in uplink outer loop

power control.
If this function is enabled, the SIR target decreases rapidly when
service quality is good, and thus system capacity is increased.
If this function is disabled, the downward SIR target adjustment step
is fixed and service quality remains relatively good.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1627
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.52.31 Maximum BER Target in Fast OLPC SIR Target Downward

Full Name
Maximum BER Target in Fast OLPC SIR Target Downward

Abbreviated Name
maxBerTarget
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum BER target in the fast

loop power control. This parameter value is used to restrict the
adjustment range of the BER target.
Instance
N/A
N/A
(0..100)%, step 0.1%
Unit
Default Value
TrfPcLoadScene
Related Parameters
minBerTarget, qePhyBerTarSil
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1628
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.32 Minimum BER Target in Fast OLPC SIR Target Downward

Full Name
Minimum BER Target in Fast OLPC SIR Target Downward

Abbreviated Name
minBerTarget
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum BER target in the fast

loop power control. This parameter value is used to restrict the
adjustment range of the BER target.
Instance
N/A
N/A
(0..100)%, step 0.1%

2-1629
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
Default Value
TrfPcLoadScene
Related Parameters
maxBerTarget, qePhyBerTarSil
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.33 Uplink Outer Loop PC QE Switch For Silent Mode

Full Name
Uplink Outer Loop PC QE Switch For Silent Mode
Abbreviated Name
ulOlPcQESwchSil
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1630
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether Quality Estimation (QE) based

Uplink Outer Loop Power Control (OLPC) is enabled or disabled
within the valid time window when the FP mode is silent. If
BLER-based OLPC is invalid, the OLPC that is based on the BER of
a physical channel can be used.
Instance
ZWF21-04-009
ZWF21-04-013
Power Control
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-1631
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether the QE-based
OLPC is enabled or disabled within the valid time window when the
FP mode is silent.
If the function is enabled, the SIR target can be decreased based
on the BER of a physical channel when the TB number does not
satisfy BLERAccpPeriod, which speeds up the decrease of the SIR
target. Accordingly, the system capacity is improved, but the service
If the function is disabled, the SIR target can be decreased only
when the number of TBs satisfies BLERAccpPeriod and the number
of error TBs is less than ErrorThres, which slows down the decrease
of the SIR target. Accordingly, the system capacity is decreased,
but the service quality is improved.
Adjustment suggestion: If the uplink capacity of the system is
limited, you can enable this function.
For the default value of this parameter, service quality is preferably
Reason
considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.34 E-DCH HARQ Power Offset FDD

Full Name
E-DCH HARQ Power Offset FDD
Abbreviated Name
edchHarqPOFdd
Managed Object

3GPP Name
2-1632
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the E-DCH HARQ power offset in FDD

mode. It is used to calculate the quantized gain factor ed of
E-DPDCH. For detailed descriptions, refer to TS25.214.
Instance
Service Related
ZWF25-04-006
ZWF21-04-013

0..6
Unit
N/A
Default Value
2ms E-TTI traffic: [6, 6, 6, 6, 6, 6, 6, 6, 6]

10ms E-TTI traffic: [6, 6, 6, 6, 6, 6, 6, 6, 6]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1633
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the E-DCH HARQ
power offset in FDD mode. It is used to calculate the quantized gain

factor ed of E-DPDCH.
The larger the parameter is, the higher the E-DPDCH transmission
power is, the higher the quality of service is, but the lower the
system capacity is.
The smaller the parameter is, the lower the E-DPDCH transmission
power is, the lower the quality of service is, but the higher the
system capacity is.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.35 Additional SIR Target Down Step Size

Full Name
Additional SIR Target Down Step Size
Abbreviated Name
addiSIRDownStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downward adjustment step size of the

additional SIR target in the SIR-target rapid convergence algorithm.
Instance
ZWF21-04-016
2-1634
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
0.1dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the downward
adjustment step size of the additional SIR target in the SIR-target

rapid convergence algorithm.
If the value is too high, the initial SIR target is decreased too rapidly,
which may affect the service quality.
If the value is too low, the initial SIR target is decreased too slowly,
which may affect the system capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1635
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.36 Uplink SIR Target Up Step Size for R99

Full Name
Uplink SIR Target Up Step Size for R99
Abbreviated Name
ulSirStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the adjustment step size of the uplink SIR
target in the R99 OLPC algorithm based on the BLER target.
This parameter is a nine-element array. These elements are used in
different load levels and user priorities. The corresponding relations
of the elements and load levels are as follows:
Element 1: low load, gold medal user
Element 2: low load, silver medal user
Element 3: low load, bronze medal user
Element 4: medium load, gold medal user
Element 5: medium load, silver medal user
Element 6: medium load, bronze medal user
Element 7: high load, gold medal user
Element 8: high load, silver medal user
Element 9: high load, bronze medal user
Instance
ZWF21-04-016
ZWF21-04-013

Power Control Algorithm Enhancement FG / Load Adaptive Power

Control FG
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.3, 0.3, 0.3, 0.3, 0.3, 0.3, 0.3, 0.3, 0.3]dB
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-1636
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
size of the uplink SIR target in the R99 OLPC algorithm based on
the BLER target.
If the value is too high, the SIR target is adjusted too rapidly, which
affects the system capacity.
If the value is too low, the SIR target is adjusted too slowly, which
affects the service quality.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.37
Full Name
Abbreviated Name
ulSirStepTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1637
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the uplink SIR target up step size of 2 ms

E-TTI HSUPA services in the HSUPA OLPC algorithm based on the
Number of HARQ Retransmission (NHR) target.
Instance

ZWF21-04-016
ZWF21-04-013


Control FG
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1]dB
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the step size for
adjusting the HSUPA SIR target (2 ms ETTI).

2-1638
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.38 Uplink SIR Target Up Step Size for HSUPA (10ms E-TTI)
Full Name
Abbreviated Name
ulSirStepTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-1639
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.3, 0.3, 0.3, 0.3, 0.3, 0.3, 0.3, 0.3, 0.3]dB
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1640
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.39 Target Number of HARQ Retransmission

Full Name
Target Number of HARQ Retransmission
Abbreviated Name
targetRetranNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the target number of HARQ

retransmissions.
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(0..15)
Unit
N/A
Default Value
[0, 0, 0, 0, 0, 0, 0, 0, 0]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-1641
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: This parameter indicates the target number of
HARQ retransmissions.
Related factors: service quality, the system capacity, and the
maximum number of E-DCH retransmissions.
If the value is too high, the number of HARQ retransmissions is too
large, which affects the service quality.
If the value is too low, the system capacity is affected.
The setting should be less than or equal to the maximum number
of E-DCH transmissions.
The default setting is based on the service quality and the system
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.40 The Target Rate of FP HARQ Retransmission Number Over

the Target (2ms E-TTI)
Full Name
The Target Rate of FP HARQ Retransmission Number Over the

Target (2ms E-TTI)
Abbreviated Name
fpTargErrorTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1642
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the target rate of 2 ms TTI FP HARQ

retransmission number over the FP HARQ retransmission number
target in the HSUPA OLPC algorithm based on the Number of
HARQ Retransmission (NHR) target.
Instance

ZWF21-04-016
ZWF21-04-013


Control FG
(0..100)%, step 0.1%
Unit
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the target rate of
2 ms TTI FP HARQ retransmission number over the FP HARQ

retransmission number target in the HSUPA OLPC algorithm based
on the Number of HARQ Retransmission (NHR) target.
If the value is too high, the service quality is affected.
If the value is too small, the system capacity is affected.
2-1643
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Target (10ms E-TTI)
Abbreviated Name
fpTargErrorTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-1644
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance

ZWF21-04-016
ZWF21-04-013


Control FG
(0..100)%, step 0.1%
Unit
Default Value
TrfPcLoadScene
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

retransmission number target in the HSUPA OLPC algorithm based
on the Number of HARQ Retransmission (NHR) target.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1645
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

BER-based OLPC Algorithm
Full Name
The BER Threshold of Increasing SIR Target in the Periodic

Abbreviated Name
berTargetUpThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER threshold for increasing the

SIR target in the periodic BER-based OLPC algorithm. When the
periodic BER-based OLPC algorithm takes effect, if the consecutive
berCntThres BERs are greater than this threshold, the SIR target
should be increased.
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(0..100)%, step 0.1%
2-1646
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
Default Value
TrfPcLoadScene
Related Parameters
BerTargetDnThres
Parameters
BerTargetDnThres[0]<=BerTargetUpThres[0];
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the BER threshold
for increasing the SIR target in the periodic BER-based OLPC

algorithm. When the periodic BER-based OLPC algorithm takes
effect, if the consecutive berCntThres BERs are greater than this
threshold, the SIR target should be increased.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1647
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
The BER Threshold of Decreasing SIR Target in the Periodic

Abbreviated Name
berTargetDnThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER threshold for decreasing the

SIR target in the periodic BER-based OLPC algorithm. When the
periodic BER-based OLPC algorithm takes effect, if the consecutive
berCntThres BERs are lower than this threshold, the SIR target
should be decreased.
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(0..100)%, step 0.1%
Unit
Default Value
TrfPcLoadScene
Related Parameters
BerTargetUpThres
2-1648
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the BER threshold
for decreasing the SIR target in the periodic BER-based OLPC

algorithm. When the periodic BER-based OLPC algorithm takes
effect, if the consecutive berCntThres BERs are lower than this
threshold, the SIR target should be decreased.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1649
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.44 The Time Window Size in the Periodic BER-based OLPC

Algorithm
Full Name
The Time Window Size in the Periodic BER-based OLPC Algorithm
Abbreviated Name
timWinSize
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time window size in the periodic

BER-based OLPC algorithm. If the number of TTIs with data in this
time window is less than ttiNumThreshOpen, the BER algorithm
takes effect. If the number of TTIs with data in this time window is
more than ttiNumThreshCls, the BER algorithm does not take effect.
Instance
ZWF21-04-016
(0..8)s, step 0.1s
Unit
Default Value
1s
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the time window size
in the periodic BER-based OLPC algorithm.

Related factors: number of TTIs with data.
If the value is too large, the BER algorithm is less easily triggered.
If the value is too small, the BER algorithm is more frequently
triggered..
The default setting should ensure that the BER algorithm is triggered
Reason
at the proper time.
2-1650
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.45 The Number Threshold of TTIs with Data to Enable the

Periodic BER-based OLPC Algorithm
Full Name
The Number Threshold of TTIs with Data to Enable the Periodic

Abbreviated Name
ttiNumThreshOpen
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the TTI quantity threshold for enabling

the periodic BER-based OLPC algorithm. If the number of TTIs
with data in the timWinSize is less than ttiNumThreshOpen, the
BER algorithm takes effect.
Instance
ZWF21-04-016
(0..200)
Unit
N/A
Default Value
Related Parameters
TtiNumThreshCls
2-1651
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
TtiNumThreshOpen<=TtiNumThreshCls;
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the TTI quantity
threshold for enabling the periodic BER-based OLPC algorithm.

Related factors: number of TTIs with data and the time window size.
If the value is too large, the BER algorithm is more frequently
triggered.
If the value is too small, the BER algorithm is less easily triggered.
The default setting should ensure that the BER algorithm is triggered
Reason
at the proper time.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.46 The Number Threshold of TTIs with Data to Disable the

Periodic BER-based OLPC Algorithm
Full Name
The Number Threshold of TTIs with Data to Disable the Periodic

Abbreviated Name
ttiNumThreshCls
Managed Object

3GPP Name
N/A
2-1652
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the TTI quantity threshold for disabling the
periodic BER-based OLPC algorithm. If the number of TTIs with
data in the timWinSize is greater than ttiNumThreshCls, the BER
algorithm does not take effect.
Instance
ZWF21-04-016
(0..200)
Unit
N/A
Default Value
Related Parameters
TtiNumThreshOpen
Parameters
TtiNumThreshOpen<=TtiNumThreshCls;
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the TTI quantity
threshold for disabling the periodic BER-based OLPC algorithm.

Related factors: number of TTIs with data and the time window size.
If the value is too large, the BER algorithm is less easily disabled.
If the value is too low, the BER algorithm is more easily disabled.
The default setting should ensure that the BER algorithm is disabled
Reason
at the proper time.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1653
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.52.47 The Number Threshold of Trigging SIRtarget Adjustment

Full Name
The Number Threshold of Trigging SIRtarget Adjustment
Abbreviated Name
berCntThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the number of times of

triggered SIR target adjustment. In the OLPC based on periodic
BERs, if the continuous BERs satisfy the SIR target increase (or
decrease) requirement, and the BER number reaches the threshold,
the SIR target can be increased (or decreased).
Instance
ZWF21-04-016
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1654
SJ-20141209142030-013|2015-11-12 (R1.3)
number of times of triggered SIR target adjustment.

If the value is too high, the SIR target adjustment is difficultly
triggered when the algorithm based on the periodic BER takes
effect, which cannot satisfy the requirement of radio condition
change. When the BER algorithm is enabled, if the SIR target is
small, the service quality may be degraded. If the SIR target is big,
the system capacity may be decreased due to power waste.
If the value is too low, the SIR target is adjusted frequently due to
the rapid BER change when the algorithm based on the periodic
BER takes effect. In this case, the service quality or system capacity
may be affected because the SIR does not reflect the change of
real radio condition.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.48 Priority Outer Loop PC Switch

Full Name
Priority Outer Loop PC Switch
Abbreviated Name
olPCPrioSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1655
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the switch for priority Outer Loop Power
Control (OLPC). OLPC includes normal OLPC and priority OLPC.
Normal OLPC must be enabled by default, and priority OLPC is
optional. 0: Off; 1: On
Instance
ZWF21-04-016
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the switch for priority
OLPC.
Related factors: system capacity.
When the function is enabled, if Windup occurs (that is, the SIR
cannot be converged to the SIR target), priority OLPC can be
triggered by the SIR error F event. The setting stops increasing of
the SIR target, and shortens the time for decreasing the SIR target
after the radio condition recovers. Accordingly, the system capacity
is improved.
Adjustment suggestion: The function is enabled if Windup frequently
occurs.
The system capacity can satisfy the requirement when the function
Reason
is disabled.
Change Take Effect
No
How to Impact
N/A
2-1656
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.52.49 SIR Target Rapid Convergence Switch

Full Name
SIR Target Rapid Convergence Switch
Abbreviated Name
sirRapidConvSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the OLPC algorithm switch for SIR-target

rapid convergence. If the function is enabled, the initial SIR target
can be rapidly decreased to the SIR target based on the BLER.
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
2-1657
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off;
1: On
Unit
N/A
Default Value
[0, 0, 0, 0, 0, 0, 0, 0, 0]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the OLPC algorithm
switch for SIR-target rapid convergence. If the function is enabled,

the initial SIR target can be rapidly decreased to the SIR target
based on the BLER.
If the function is enabled, the initial SIR target can be rapidly
decreased to the SIR target based on the BLER of the service. This
improves the system capacity but affects the initial channel quality
of the service.
limited, enable the function. If the system is in low-load status,
disable the function. Whether the fast convergence algorithm is
enabled is determined when the first RL is established and is not
changed any longer. Therefore, the switch is determined based on
the service or signaling configuration of the RL when users switch to
CELL-DCH status (meaning the 13.6k signaling configuration).
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1658
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.52.50 Additional SIR Target Down Period of the SIR Target Rapid
Convergence Function
Full Name
Additional SIR Target Down Period of the SIR Target Rapid

Convergence Function
Abbreviated Name
addiSIRDownPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downward adjustment period of the

In the SIR-target rapid convergence algorithm, the additional SIR
target is decreased periodically, this parameter indicates the period.
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(20..1000)ms, setp 20ms
Unit
ms
Default Value
[100ms, 100ms, 100ms, 100ms, 100ms, 100ms, 100ms, 100ms,

100ms]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1659
SJ-20141209142030-013|2015-11-12 (R1.3)
adjustment period of the additional SIR target in the SIR-target rapid

convergence algorithm.
If the value is too low, the initial SIR target is decreased too rapidly,
If the value is too high, the initial SIR target is decreased too slowly,
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.51 Time Window Size of Opening Shield Period

Full Name
Time Window Size of Opening Shield Period
Abbreviated Name
outSirTimWinSize
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time window size for enabling the
shield period in the SIR target increasing shield algorithm when the
target BLER-based OLPC is used. If the total upward adjustment
quantity of the SIR target in a time window (outSirTimWinSize)
exceeds outSirThresh, the SIR target cannot be increased in the
following shield period.
2-1660
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-04-016
(0..2000)ms, step 1ms
Unit
ms
Default Value
400ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the time window size
for enabling the shield period in the SIR target increasing shield
algorithm when the target BLER-based OLPC algorithm is used.
Related factors: service model and the application scenario.
If the value is too large, the shield action is more frequently triggered.
If the value is too small, the shield action cannot be triggered.
The default setting should ensure that the shielding action is
Reason
triggered at the proper time.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1661
SJ-20141209142030-013|2015-11-12 (R1.3)
2.52.52 Threshold of Opening Shield Period

Full Name
Threshold of Opening Shield Period
Abbreviated Name
outSirThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold for enabling the shield

period in the SIR target increasing shield algorithm when the target
BLER-based OLPC is used. If the total upward adjustment quantity
of the SIR target in a time window (outSirTimWinSize) exceeds
outSirThresh, the SIR target cannot be increased in the following
shield period.
Instance
ZWF21-04-016
(0.1..10)dB, step 0.1dB
Unit
dB
Default Value
2dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the threshold for
enabling the shield period in the SIR target increasing shield

algorithm when the target BLER-based OLPC algorithm is used.
Related factors: service model and the application scenario.
If the value is too large, the shield action cannot be triggered.
If the value is too small, the shield action is more frequently triggered.
The default setting should ensure that the shielding action is
Reason
triggered at the proper time.
2-1662
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.52.53 Shield Period of SIR Target Increasing Shield Algorithm

Full Name
Shield Period of SIR Target Increasing Shield Algorithm
Abbreviated Name
shieldPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the shield period in the SIR target

increasing shield algorithm when the target BLER-based OLPC is
used. If the total upward adjustment quantity of the SIR target in a
time window (outSirTimWinSize) exceeds outSirThresh, the SIR
target cannot be increased in the following shield period.
Instance
ZWF21-04-016
(0..2000)ms, step 1ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
2-1663
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the shield period in the
SIR target increasing shield algorithm when the target BLER-based

OLPC algorithm is used.
If the value is too large, the service quality is affected.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53 Power Control Related to Service for Reserved

User(URsvdUserSrvPc)
2.53.1 Power Control Related to Service for Reserved User Object
ID
Full Name
Power Control Related to Service for Reserved User Object ID
Abbreviated Name
URsvdUserSrvPcId
2-1664
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
Power Control Related to Service for Reserved User(URsvdUserSrvPc)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the power control related

to services for reserved users.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Service Function->Power Control Related
to Service for Reserved User
N/A
2-1665
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Sub-service Type
Abbreviated Name
srvType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the sub-service type by numbering each

sub-service. The numbers 0...5 are used for signaling services,
and 6...250 are used for single services. Odd numbers are used
to configure downlink services, while even numbers are used to
configure uplink services.
Instance
Service Related
N/A
N/A
0..65534
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1666
SJ-20141209142030-013|2015-11-12 (R1.3)
Related factors: Numbers 0...5 are used for signaling services, and
6...250 are used for single services. Odd numbers are configured
services. Different services have different IDs.
be modified.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulSirTargUpStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1667
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the step for increasing the SIR target of
uplink outer loop power control for reserved subscribers. To restore
communication quality as soon as possible when the communication
environment worsens and to lower the communication quality
slowly (to make it more reliable) when the environment improves,
the increasing and decreasing steps are set asymmetrically and
separately.
Instance
Service Related
N/A
N/A
(0.1..0.5)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MaxSirTargUpStep of WhiteTrfPc;
Parameters

Data Type
double[DBS_RR_MAX_NUM_LOADLEVEL]
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
the SIR target of uplink outer loop power control for reserved
subscribers.
If the value is too high, when the SIR target is increased, the value
may be over-increased, and the power resource may be wasted and
thus the system capacity is reduced.
2-1668
SJ-20141209142030-013|2015-11-12 (R1.3)
The service quality and system capacity for reserved subscribers
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulSirTargDnStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for decreasing the SIR target of
uplink outer loop power control for reserved subscribers. To restore
separately.
Instance
Service Related
2-1669
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
(0.1..0.5)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MaxSirTargDnStep of WhiteTrfPc
Parameters
UlSirTargDnStep[0]<= MaxSirTargDnStep[0];
UlSirTargDnStep[2]<= MaxSirTargDnStep[2].
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
decreasing the SIR target of uplink outer loop power control for
If the value is too high, when the SIR target is decreased, the value
may be over-decreased, and thus service quality is reduced.
If the value is too low, when the SIR target is decreased, the power
resource may be wasted and thus the system capacity is reduced.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1670
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
maxSirTargDnStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
target of uplink outer loop power control for reserved subscribers.
Instance
Service Related
N/A
N/A
(0.1..1)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, UlSirTargDnStep of WhiteTrfPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1671
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the maximum step
for decreasing the SIR target of uplink outer loop power control for
quality is reduced.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
maxSirTargUpStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1672
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
uplink SIR target.
Instance
Service Related
N/A
N/A
(0.1..1)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, UlSirTargUpStep of WhiteTrfPc
Parameters

Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No

The default parameter value is set based on the service quality and
Reason
Change Take Effect
No
2-1673
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Switch
Full Name
Abbreviated Name
swchAdaptiveStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the adaptive downward

adjustment step for the SIR target is used in uplink outer loop power
control for reserved subscribers.
Instance
Service Related
N/A
N/A
0: Off
1: On
Unit
N/A
2-1674
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_LOADLEVEL]
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
downward adjustment step for the SIR target is used in uplink outer
loop power control for reserved subscribers.
service quality is good and system capacity is increased.
If this function is disabled, the SIR target decrease step is fixed and
service quality remains relatively good.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.8 DPCH Maximum DL Power

Full Name
DPCH Maximum DL Power
Abbreviated Name
maxDlDpchPwr
Managed Object

2-1675
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Maximum DL Power; Maximum DL TX Power
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the maximum transmission power of the

downlink DPCH for reserved subscribers. When downlink inner loop
power control is performed, new transmit power must be smaller
than or equal to the configured DPCH Maximum DL Power. If the
newly calculated transmit power is larger than the configured DPCH
Maximum DL Power, set it to be equal to the configured DPCH
Maximum DL Power.
Instance
Service Related
N/A
N/A
(-35..15)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MinDlDpchPwr of WhiteTrfPc
For downlink services:
Parameters
MaxDlDpchPwr[0]>= MinDlDpchPwr[0];
MaxDlDpchPwr[2]>= MinDlDpchPwr[2].
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1676
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the maximum
transmission power of the downlink DPCH for reserved subscribers.

Related factors: service quality and system capacity. This parameter
ensures that the minimum power requirement of UEs at the edge of
the cell is met so that the maximum path loss can be overcome.
If the maximum power of the service is too high, the service obtains
a very high power when the radio signal is very poor, and the
capacity of the cell is reduced.
If the maximum power of the service is too low, the power of the
service cannot satisfy requirements in different conditions.
Reason
are considered.
Change Take Effect
Ongoing Connection(at date rate level change)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.9 DPCH Minimum DL Power

Full Name
DPCH Minimum DL Power
Abbreviated Name
minDlDpchPwr
Managed Object

3GPP Name
Minimum DL Power
3GPP Reference
TS 25.423;
TS 25.433
2-1677
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the minimum transmission power of the

downlink DPCH for reserved subscribers. When downlink inner
loop power control is performed, new transmit power must be larger
than or equal to the configured DPCH Minimum DL Power. If the
newly calculated transmit power is lower than the configured DPCH
Minimum DL Power, set it to be equal to the configured DPCH
Minimum DL Power.
Instance
Service Related
N/A
N/A
(-35..15)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MaxDlDpchPwr of WhiteTrfPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the minimum
transmission power of the downlink DPCH for reserved subscribers.

Related factors: call drop rate and system capacity.
If the value is too high, the power cannot be decreased to a suitable
level and the cell capacity is reduced.
If the value is too low, the call drop rate may increase because
excessive decrease of the power may cause the power to be unable
to return to normal level.
2-1678
SJ-20141209142030-013|2015-11-12 (R1.3)
The call drop rate and system capacity for reserved subscribers
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.10 DPCCH Pilot Field Eb/N0

Full Name
DPCCH Pilot Field Eb/N0
Abbreviated Name
dpcchPilotEbN0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quality factor of the uplink DPCCH

pilot field for reserved subscribers, which is used for calculating the
uplink DPCCH power offset upon new call access.
Instance
Service Related
N/A
N/A

2-1679
SJ-20141209142030-013|2015-11-12 (R1.3)
(-30..+30)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the quality factor of
the uplink DPCCH pilot field for reserved subscribers.

Related factors: service quality and system capacity (because
Eb/N0 of the DPCCH PILOT field varies with different radio
environments).
If the value is large, the service transmission power is high but the
system capacity is reduced.
If the value is small, the service transmission power is low and
Adjustment suggestion: If the cell uplink capacity is limited, the
value of this parameter can be reduced.
The balance between service quality and system capacity for
Reason
reserved subscribers is considered because Eb/N0 of the DPCCH

pilot field varies with radio environments, and thus the average
value is recommended.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1680
SJ-20141209142030-013|2015-11-12 (R1.3)
2.53.11 Maximum Allowed Uplink DPCH Transmission Power

Full Name
Maximum Allowed Uplink DPCH Transmission Power
Abbreviated Name
maxUlDpchPwr
Managed Object

3GPP Name
Maximum allowed UL TX power; Maximum Allowed UL Tx Power
3GPP Reference
TS 25.331;
TS 25.423
Description
This parameter indicates the maximum DPCH uplink transmit power

allowed for reserved subscribers. When uplink inner loop power
control is performed, the transmit power newly calculated by a UE
may be larger than this parameter. In this case, the UE can only use
this parameter for transmitting signals.
Instance
Service Related
N/A
N/A
(-50..33)dBm, step 1dBm
Unit
dBm
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1681
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the maximum allowed
UE uplink transmit power for reserved subscribers.

Related factors: uplink service quality, system capacity, and uplink
coverage.
If this parameter is too small, the service quality is reduced.
If this parameter is too large, uplink interference is increased and
cell capacity is decreased.
The real maximum transmit power is configured to the smaller value
between maxUlDpchPwr and the UE transmit power capability.
Normally, the maximum uplink transmit power of a UE is 24 dBm.
Reason
The default value is 33 dBm, which does not limit the uplink transmit
power of the UE.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.12 Uplink Initial SIR Target

Full Name
Uplink Initial SIR Target
Abbreviated Name
ulInitSIR
Managed Object

3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
2-1682
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the R99 service initial SIR target of the
uplink physical channel for reserved subscribers. The SIR target is
the criterion of uplink inner loop power control. The value affects the
convergence speed of power control.
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulMaxSIR, ulMinSIR, srvType of URsvdUserSrvPc
Parameters
ulMaxSIR[0]>ulInitSIR[0]>ulMinSIR[0];
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the R99 service initial
SIR target of the uplink physical channel for reserved subscribers.

Related factors: uplink synchronization and uplink cell capacity. The
initial SIR target of the service should be close to the normal level of
the SIR target to speed up the initial convergence of the SIR target.
If the value is too high, the transmit power is increased excessively in
the initial service setup period and thus the cell capacity is reduced.
If the value is too low, uplink synchronization requires more time and
even may fail because the transmit power is too low in the initial
service setup period.
Uplink synchronization and uplink cell capacity are considered.
Reason
2-1683
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.13 Maximum Uplink SIR Target

Full Name
Maximum Uplink SIR Target
Abbreviated Name
ulMaxSIR
Managed Object

3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the maximum uplink target SIR of R99

service for reserved subscribers, which is used to restrict the range
of the SIR target in outer loop power control.
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
2-1684
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulInitSIR, ulMinSIR, srvType of URsvdUserSrvPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum uplink
SIR target, and is used to prevent the SIR target from increasing to
an ultra-high value.
Related factors: service quality and uplink cell capacity.
If the value is too high, the SIR target and uplink transmit power are
too high, which affects the cell capacity.
If the value is too low, the SIR target is so low that the uplink
demodulation requirement cannot be satisfied, which affects service
quality and uplink coverage.
Service quality and uplink system capacity are considered.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1685
SJ-20141209142030-013|2015-11-12 (R1.3)
2.53.14 Minimum Uplink SIR Target

Full Name
Minimum Uplink SIR Target
Abbreviated Name
ulMinSIR
Managed Object

3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the minimum uplink target SIR of R99

service for reserved subscribers, which is used to restrict the range
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulInitSIR, ulMaxSIR, srvType of URsvdUserSrvPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1686
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the minimum uplink
SIR target, and is used to prevent the SIR target from decreasing to
an extremely low value.
If the parameter value is too large, the SIR target cannot be
decreased to a suitable value and thus the cell capacity is affected
due to the high transmit power.
If the value is too low, the SIR target is so low that it takes longer
time for the SIR target to increase from the minimum value to the
normal working level, which affects service quality.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.15 BLER Target

Full Name
BLER Target
Abbreviated Name
blerTarget
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423
2-1687
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Block Error Ratio (BLER) target

for reserved subscribers, and is the benchmark for outer loop
power control. In the case of a service with multiple subflows, this
value); the scalar value D in TS 25.331 is P*10; value configured in
the database = D+63; actual value configured on the UI is 10^P, and
is listed in exponential form, refer to the table in value range.
Calculation method:
BLEREVAL=1: 63;
S=[BLEREVAL; BLER]'
Instance
Service Related
N/A
N/A
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
(BLER) target for reserved subscribers.

2-1688
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
errorThresh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

in outer loop power control that uses the threshold algorithm
for reserved subscribers. If the number of error blocks exceeds
the threshold within a period, the RNC increases the SIR target
immediately.
Instance
Service Related
N/A
2-1689
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Unit
TBs
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
threshold algorithm for reserved subscribers.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1690
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
blerAccpPeriod
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the error block tolerance period in outer

loop power control that uses the threshold algorithm for reserved
subscribers. If the tolerance period does not expire but the
number of error blocks is larger than the error block threshold,
the Signal-to-Interference Ratio (SIR) target is increased. If
the tolerance period expires and the number of error blocks is
smaller than the error block threshold, the SIR target is decreased.
Otherwise, the SIR target is not adjusted.
Instance
Service Related
N/A
N/A
(1..65535)TBs, step 1TB
Unit
TBs
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1691
SJ-20141209142030-013|2015-11-12 (R1.3)
algorithm for reserved subscribers.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Upward (10ms E-TTI)
Abbreviated Name
thrHarqFailTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1692
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the threshold of the HARQ failure number

for increasing the SIR target for reserved subscribers when E-TTI is
10 ms. If the number of HARQ failures exceeds the threshold within
the time window, the RNC increases the SIR target. It is applicable
to the services carried on the E-DCH.
Instance
Service Related
N/A
N/A
0..255
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
HARQ failure number for increasing the SIR target for reserved
subscribers when E-TTI is 10 ms.
system capacity.
Reason
are considered.
Change Take Effect
No
2-1693
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Upward (2ms E-TTI)
Abbreviated Name
thrHarqFailTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

for increasing the SIR target for reserved subscribers when E-TTI is
Instance
Service Related
N/A
N/A
2-1694
SJ-20141209142030-013|2015-11-12 (R1.3)
0..255
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
HARQ failure number for increasing the SIR target for reserved
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1695
SJ-20141209142030-013|2015-11-12 (R1.3)

E-TTI)
Full Name
Abbreviated Name
nhrThrDownTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

(NHR) threshold for decreasing the SIR target for reserved
subscribers when E-TTI is 10 ms. When the NHR is smaller than
the threshold, the RNC decreases the SIR target. It is applicable to
the services carried on the E-DCH.
Instance
Service Related
N/A
N/A
(0..15), step 0.01
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, NhrThrUpTti10[] of WhiteTrfPc,

NhrThrDownTti10[] of WhiteTrfPc
1.For uplink services: nhrThrDownTti10[0]<= nhrThrDownTti10[1]<=
Parameters
nhrThrDownTti10[2].
2.For uplink services:
nhrThrDownTti10[0] <= nhrThrUpTti10[0],
nhrThrDownTti10[2] <= nhrThrUpTti10[2].
Data Type
Parameter Type
Don't Care
2-1696
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Retransmissions (NHR) threshold for decreasing the SIR target for

reserved subscribers when E-TTI is 10 ms.
If the parameter value is big, it is easy to trigger the decrease of
the target SIR, which reduces the service quality but increases the
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
nhrThrUpTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1697
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

(NHR) threshold for increasing the SIR target for reserved
subscribers when E-TTI is 10 ms. If the NHR is larger than the
threshold, the RNC increases the SIR target. It is applicable to the
services carried on the E-DCH.
Instance
Service Related
N/A
N/A
(0..15), step 0.01
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters

1.For uplink services: NhrThrUpTti10[0]<= NhrThrUpTti10[1]<=
Parameters
NhrThrUpTti10[2].
2.For uplink services: NhrThrDownTti10[0] <= NhrThrUpTti10[0]
NhrThrDownTti10[1] <= NhrThrUpTti10[1]
NhrThrDownTti10[2] <= NhrThrUpTti10[2].
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Retransmissions (NHR) threshold for increasing the SIR target for

system capacity.
2-1698
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

(10ms E-TTI)
Full Name

E-TTI)
Abbreviated Name
upThrSampNumTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

the SIR target for reserved subscribers when E-TTI is 10 ms.
The SIR target cannot be increased unless the sample number is
larger than or equal to the threshold. When HARQ retransmission
(including when the number of HARQ retransmissions is 0) or failure
is recorded once, a sample is obtained.
2-1699
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
Service Related
N/A
N/A
0..255
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
number for increasing the SIR target for reserved subscribers when
E-TTI is 10 ms.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1700
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name

(10ms E-TTI)
Abbreviated Name
dwThrSampNumTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

decreasing the SIR target for reserved subscribers when E-TTI is 10
ms. The SIR target cannot be decreased unless the sample number
is larger than or equal to the threshold. When HARQ retransmission
Instance
Service Related
N/A
N/A
0..255
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1701
SJ-20141209142030-013|2015-11-12 (R1.3)
number for decreasing the SIR target for reserved subscribers when
E-TTI is 10 ms.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
nhrThrDownTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1702
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

(NHR) threshold for decreasing the SIR target for reserved
subscribers when E-TTI is 2 ms. If the NHR is smaller than the
threshold, the RNC decreases the SIR target. It is applicable to the
Instance
Service Related
N/A
N/A
(0..15), step 0.01
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters

1.For uplink services: NhrThrDownTti2[0] <= NhrThrDownTti2[1] <=
Parameters
NhrThrDownTti2[2]
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No

system capacity.
2-1703
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
nhrThrUpTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

(NHR) threshold for increasing the SIR target for reserved
Instance
Service Related
N/A
2-1704
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
(0..15), step 0.01
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters

1.For uplink services: NhrThrUpTti2[0] <= NhrThrUpTti2[1] <=
Parameters
NhrThrUpTti2[2]
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No

system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1705
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

(2ms E-TTI)
Full Name

E-TTI)
Abbreviated Name
upThrSampNumTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

the SIR target for reserved subscribers when E-TTI is 2 ms. The
SIR target cannot be increased unless the sample number is
Instance
Service Related
N/A
N/A
0..255
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
2-1706
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
number for increasing the SIR target for reserved subscribers when
E-TTI is 2 ms.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

E-TTI)
Abbreviated Name
dwThrSampNumTti2
Managed Object

2-1707
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

decreasing the SIR target for reserved subscribers when E-TTI is 2
Instance
Service Related
N/A
N/A
0..255
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
number for decreasing the SIR target for reserved subscribers when
E-TTI is 2 ms.
system capacity.
2-1708
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulOlPcQESwchSil
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

for reserved subscribers within the valid time window when the FP
mode is silent. If BLER-based OLPC is invalid, the OLPC that is
based on the BER of a transmission channel can be used.
Instance
Service Related
N/A
2-1709
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0: Off
1: On
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
OLPC is enabled or disabled for reserved subscribers within the

valid time window when the FP mode is silent.
satisfy blerAccpPeriod, which speeds up the decrease of the SIR
when the number of TBs satisfies blerAccpPeriod and the number of
error TBs is less than errorThresh, which slows down the decrease
Service quality is considered first.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1710
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
qePhyBerTarSil
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

within the valid time window when the FP mode is silent. The
BER target is used in outer loop power control based on QE. If
QESelector is set to Selected and a transmission channel BER
is available, the transmission channel BER is the base for QE of
uplink data frames. If no transport channel BER is available for
the selected DCH, the physical channel BER is used for QE. If
QESelector is set to "Non-selected", the physical channel BER is
used for QE of uplink data frames. If mixed services are used, the
minimum value in QePhyBerTarSil of each service is combined,
and signaling is excluded.
Instance
Service Related
N/A
N/A
(0..100)%, step 0.1%
2-1711
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
physical channel within the valid time window when the FP mode
is silent. The BER target is used in outer loop power control based
on QE.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1712
SJ-20141209142030-013|2015-11-12 (R1.3)

or Equal BER Target
Full Name

Equal BER Target
Abbreviated Name
qeCntThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
the physical channel BER is less than or equal to the BER target in
the QE-based uplink outer loop power control algorithm for reserved
subscribers. If the number of times that the physical channel BER is
less than or equal to the BER target is greater than or equals to the
threshold, the RNC decreases the SIR target immediately.
Instance
Service Related
N/A
N/A
1..20
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1713
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the threshold for the
number of times that the physical channel BER is less than or equal
to the BER target in the QE-based uplink outer loop power control
algorithm for reserved subscribers.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
edchHarqPOFDD
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
2-1714
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the E-DCH HARQ power offset for reserved
subscribers in FDD mode. It is used to calculate the quantized
gain factor ed of E-DPDCH. For the detailed descriptions, refer to
TS25.214.
Instance
Service Related
N/A
N/A
0..6
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
power offset for reserved subscribers in FDD mode. It is used to

calculate the quantized gain factor ed of E-DPDCH.
system capacity is.
system capacity is.
Reason
are considered.
Change Take Effect
New Connection
No
2-1715
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
addiSIRDownStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
N/A
N/A
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
2-1716
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.33 Initial Value for BLER Based SIR Target

Full Name
Initial Value for BLER Based SIR Target
Abbreviated Name
initBlerSIR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1717
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the initial value of the BLER-based SIR

target of R99 services for reserved subscribers in the SIR-target
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulMinSIR, ulMaxSIR
For uplink service:
Parameters
ulMinSIR[0]<=initBlerSIR[0]+initSirAdd[0]<=ulMaxSIR[0];
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the initial value of the
BLER-based SIR target of R99 services for reserved subscribers in

the SIR-target rapid convergence algorithm.
Related factors: uplink synchronization and uplink cell capacity.
Adjustment suggestion: The initial SIR target should be close to the
normal level of the SIR target that meets the needs of the service
BLER target.
Reason
2-1718
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.34 Initial Value for Additional SIR Target

Full Name
Initial Value for Additional SIR Target
Abbreviated Name
initSirAdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial value of the additional SIR target
of R99 services for reserved subscribers in the SIR-target rapid
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
2-1719
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulMinSIR, ulMaxSIR
For uplink service:
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
additional SIR target of R99 services for reserved subscribers in the

SIR-target rapid convergence algorithm.
Adjustment suggestion: The initial value of the additional SIR target
of the service can be set to a higher value when the service setup
success rate is low.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1720
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
ulSirStep
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
target in the R99 algorithm based on the BLER target.
Instance
Service Related
N/A
N/A
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.3, 0.3, 0.3]dB
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1721
SJ-20141209142030-013|2015-11-12 (R1.3)
size of the uplink SIR target in the R99 algorithm based on the
BLER target.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
ulSirStepTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1722
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
N/A
N/A
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.1, 0.1, 0.1]dB
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
2-1723
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
ulSirStepTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
N/A
N/A
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.3, 0.3, 0.3]dB
Related Parameters
N/A
N/A
Parameters
Data Type
2-1724
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
targetRetranNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1725
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

retransmissions.
Instance
Service Related
N/A
N/A
(0..15)
Unit
N/A
Default Value
[0, 0, 0]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Related factors: service quality, system capacity, and maximum
number of E-DCH retransmissions.
The value of this parameter should be less than or equal to the
maximum number of E-DCH transmissions.
Reason
Change Take Effect
No
How to Impact
N/A
2-1726
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Target (2ms E-TTI)
Abbreviated Name
fpTargErrorTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
N/A
N/A
(0..100)%, step 0.1%
Unit
Default Value
[10%, 10%, 10%]
Related Parameters
N/A
2-1727
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No

retransmission number target.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Target (10ms E-TTI)
Abbreviated Name
fpTargErrorTti10
Managed Object

2-1728
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
N/A
N/A
(0..100)%, step 0.1%
Unit
Default Value
[1%, 1%, 1%]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
2-1729
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Abbreviated Name
berTargetUpThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER threshold for increasing SIR target
in the periodic BER-based OLPC algorithm. When the periodic
BER-based OLPC is effective, if the consecutive berCntThres BERs
are greater than this threshold, the SIR target should be increased.
Instance
Service Related
N/A
N/A
(0..100)%, step 0.1%
Unit
%
2-1730
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
URsvdUserSrvPc
Related Parameters
BerTargetDnThres
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the BER threshold for
increasing SIR target in the periodic BER-based OLPC algorithm.

When the periodic BER-based OLPC is effective, if the consecutive
berCntThres BERs are greater than this threshold, the SIR target
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

2-1731
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name

Abbreviated Name
berTargetDnThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER threshold for decreasing

SIR target in the periodic BER-based OLPC algorithm. When
the periodic BER-based OLPC is effective, if the consecutive
Instance
Service Related
N/A
N/A
(0..100)%, step 0.1%
Unit
Default Value
URsvdUserSrvPc
Related Parameters
BerTargetUpThres
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1732
SJ-20141209142030-013|2015-11-12 (R1.3)
decreasing SIR target in the periodic BER-based OLPC algorithm.

When the periodic BER-based OLPC is effective, if the consecutive
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
berCntThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the number of times for

triggering SIR target adjustments. In the periodic BER based OLPC,
if the continuous BERs satisfy the SIR target increase (or decrease)
requirement, and the BER number reaches the threshold, the SIR
target can be increased (or decreased).
2-1733
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
Service Related
N/A
N/A
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
number of times for triggering SIR target adjustments.

Related factors: The quality of service and the system capacity
must be considered.
If the value is too high, the SIR target adjustment is difficult to be
triggered when the periodic BER based algorithm is effective, which
cannot satisfy the requirement of radio condition change. When the
BER algorithm is enabled, if the SIR target is low, the service quality
may be reduced. If the SIR target is high, the system capacity may
be decreased due to power waste.
the rapid BER change when the periodic BER based algorithm is
effective. In this case, the service quality or system capacity may
be affected because the SIR does not reflect the change of the real
radio condition.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1734
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.53.44 Uplink Initial SIR Target (10ms TTI HSUPA)

Full Name
Uplink Initial SIR Target (10ms TTI HSUPA)
Abbreviated Name
ulInitSIRTti10
Managed Object

3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the 10 ms TTI HSUPA service initial SIR

target of the uplink physical channel for reserved subscribers. The
SIR target is the criterion of uplink inner loop power control. The
value affects the convergence speed of power control.
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulMaxSIRTti10, ulMinSIRTti10, srvType of URsvdUserSrvPc
2-1735
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
ulMaxSIRTti10[0]>ulInitSIRTti10[0]>ulMinSIRTti10[0];
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the 10 ms TTI HSUPA
service initial SIR target of the uplink physical channel for reserved
subscribers.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.45 Maximum Uplink SIR Target (10ms TTI HSUPA)

Full Name
Maximum Uplink SIR Target (10ms TTI HSUPA)

2-1736
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
ulMaxSIRTti10
Managed Object

3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the maximum uplink target SIR of 10 ms

TTI HSUPA service for reserved subscribers, which is used to
restrict the range of the SIR target in outer loop power control.
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulInitSIRTti10, ulMinSIRTti10, srvType of URsvdUserSrvPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-1737
SJ-20141209142030-013|2015-11-12 (R1.3)
target SIR of 10 ms TTI HSUPA service for reserved subscribers,

and is used to prevent the SIR target from increasing to an ultra-high
value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.46 Minimum Uplink SIR Target (10ms TTI HSUPA)

Full Name
Minimum Uplink SIR Target (10ms TTI HSUPA)
Abbreviated Name
ulMinSIRTti10
Managed Object

3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
2-1738
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the minimum uplink target SIR of 10 ms

TTI HSUPA service for reserved subscribers, which is used to
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulInitSIRTti10, ulMaxSIRTti10, srvType of URsvdUserSrvPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
target SIR of 10 ms TTI HSUPA service for reserved subscribers,

and is used to prevent the SIR target from decreasing to an ultra-low
value.
Reason
2-1739
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.53.47 Initial Value for BLER Based SIR Target (10ms TTI HSUPA)
Full Name
Initial Value for BLER Based SIR Target (10ms TTI HSUPA)
Abbreviated Name
initBlerSIRTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

target of 10 ms TTI HSUPA services for reserved subscribers in the
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
2-1740
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulMinSIRTti10, ulMaxSIRTti10
For uplink service:
Parameters
ulMinSIRTti10[0]<=initBlerSIRTti10[0]+initSirAddTti10[0]<=ulMaxSIRTti10[0];
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
BLER-based SIR target of 10 ms TTI HSUPA services for reserved

subscribers in the SIR-target rapid convergence algorithm.
BLER target.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1741
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.53.48 Initial Value for Additional SIR Target (10ms TTI HSUPA)
Full Name
Initial Value for Additional SIR Target (10ms TTI HSUPA)
Abbreviated Name
initSirAddTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
of 10 ms TTI HSUPA services for reserved subscribers in the
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
For uplink service:
Parameters
Data Type
2-1742
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
additional SIR target of 10 ms TTI HSUPA services for reserved

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulInitSIRTti2
Managed Object

2-1743
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
Description

target of the uplink physical channel for reserved subscribers. The
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulMaxSIRTti2, ulMinSIRTti2, srvType of URsvdUserSrvPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
service initial SIR target of the uplink physical channel for reserved
subscribers.
2-1744
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMaxSIRTti2
Managed Object

3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the maximum uplink target SIR of 2 ms TTI

HSUPA service for reserved subscribers, which is used to restrict
the range of the SIR target in outer loop power control.
Instance
Service Related
2-1745
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulInitSIRTti2, ulMinSIRTti2, srvType of URsvdUserSrvPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
target SIR of 2 ms TTI HSUPA service for reserved subscribers, and

is used to prevent the SIR target from increasing to an ultra-high
value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1746
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
ulMinSIRTti2
Managed Object

3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the minimum uplink target SIR of 2 ms TTI

HSUPA service for reserved subscribers, which is used to restrict
Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
ulInitSIRTti2, ulMaxSIRTti2, srvType of URsvdUserSrvPc
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
2-1747
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
target SIR of 2 ms TTI HSUPA service for reserved subscribers, and

is used to prevent the SIR target from decreasing to an ultra-low
value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initBlerSIRTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1748
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
N/A
N/A
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
For uplink service:
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
BLER-based SIR target of 2 ms TTI HSUPA services for reserved

BLER target.
2-1749
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initSirAddTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial value of the additional SIR

Instance
Service Related
N/A
N/A

2-1750
SJ-20141209142030-013|2015-11-12 (R1.3)
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
URsvdUserSrvPc
Related Parameters
For uplink service:
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the initial value of
the additional SIR target of 2 ms TTI HSUPA services for reserved

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1751
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
sirRapidConvSwi
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

rapid convergence for reserved subscribers. If the function is
enabled, the initial SIR target can be rapidly decreased to the SIR
target based on the BLER.
Instance
N/A
N/A
0: Off;
1: On
Unit
N/A
Default Value
URsvdUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Don't Care
Negotiation With CN
No
2-1752
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
switch for SIR-target rapid convergence for reserved subscribers.

decreased to the SIR target based on the BLER.
of the service.
Adjustment suggestion: The service quality is considered first for
reserved subscribers. It is recommended to turn off the switch.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.54 Power Control Related to Service for Diamond

User (UDiamondUserSrvPc)
2.54.1 Power Control Related to Service for Diamond User Object ID
Full Name
Power Control Related to Service for Diamond User Object ID
Abbreviated Name
UDiamondUserSrvPcId
Managed Object
Power Control Related to Service for Diamond User

(UDiamondUserSrvPc)
2-1753
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

to services for diamond users.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
to Service for Diamond User
N/A
N/A
2-1754
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Sub-service Type
Abbreviated Name
srvType
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the sub-service type by numbering each

sub-service. The numbers 0...5 are used for signaling services,
and 6...250 are used for single services. Odd numbers are used
to configure downlink services, while even numbers are used to
configure uplink services.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0..65534
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Related factors: Numbers 0...5 are used for signaling services, and
6...250 are used for single services. Odd numbers are configured
services. Different services have different IDs.
be modified.
N/A
Reason
2-1755
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulSirTargUpStep
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for increasing the SIR target of
uplink outer loop power control for diamond subscribers. To restore
environment worsens and to lower the communication quality slowly
(for higher reliability) when the environment improves, the increasing
and decreasing steps are set asymmetrically and separately.
Instance
Service Related
ZWF21-05-027
VIP Qos
2-1756
SJ-20141209142030-013|2015-11-12 (R1.3)
VIP Qos FG
(0.1..0.5)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MaxSirTargUpStep of WhiteTrfPc;
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
the SIR target of uplink outer loop power control for diamond
subscribers.
If the value is too high, when the SIR target is increased, the value
may be over-increased, and the power resource may be wasted and
thus the system capacity is reduced.
The service quality and system capacity for diamond subscribers
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1757
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
ulSirTargDnStep
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the step for decreasing the SIR target of
uplink outer loop power control for diamond subscribers. To restore
separately.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0.1..0.5)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MaxSirTargDnStep of WhiteTrfPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-1758
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
decreasing the SIR target of uplink outer loop power control for
If the value is too high, when the SIR target is decreased, the value
may be over-decreased, and thus service quality is reduced.
If the value is too low, when the SIR target is decreased, the power
resource may be wasted and thus the system capacity is reduced.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
maxSirTargDnStep
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1759
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
target of uplink outer loop power control for diamond subscribers.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0.1..1)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, UlSirTargDnStep of WhiteTrfPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum step
for decreasing the SIR target of uplink outer loop power control for
quality is reduced.
Reason
are considered.
Change Take Effect
No
2-1760
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
maxSirTargUpStep
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
uplink SIR target.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0.1..1)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, UlSirTargUpStep of WhiteTrfPc
2-1761
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

The default parameter value is set based on the service quality and
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Switch
Full Name
2-1762
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
swchAdaptiveStep
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the adaptive downward

adjustment step for the SIR target is used in uplink outer loop power
control for diamond subscribers.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0: Off
1: On
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
SrvType of WhiteTrfPc
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
Yes
downward adjustment step for the SIR target is used in uplink outer
loop power control for diamond subscribers.
service quality is good, and thus the system capacity is increased.
If this function is disabled, the downward SIR target adjustment step
is fixed and the service quality remains relatively good.
2-1763
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
maxDlDpchPwr
Managed Object

(UDiamondUserSrvPc)
3GPP Name
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the maximum DPCH downlink transmit

power for diamond subscribers. When downlink inner loop power
control is performed, new transmit power must be smaller than or
equal to the configured DPCH Maximum DL Power. If the newly
calculated transmit power is larger than the configured DPCH
Maximum DL Power, set it to be equal to the configured DPCH
Maximum DL Power.
2-1764
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-35..15)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MinDlDpchPwr of WhiteTrfPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum DPCH
downlink transmit power for diamond subscribers.

Related factors: service quality and system capacity. This parameter
ensures that the minimum power requirement of UEs at the edge of
the cell is met so that the maximum path loss can be overcome.
If the maximum power of the service is too high, the service
maintains a very high power when the radio signal is very poor, and
the capacity of the cell is reduced.
If the maximum power of the service is too low, the power of the
service cannot satisfy requirements in different conditions.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1765
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
minDlDpchPwr
Managed Object

(UDiamondUserSrvPc)
3GPP Name
Minimum DL Power
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the minimum DPCH downlink transmit

power for diamond subscribers. When downlink inner loop power
control is performed, the new transmit power must be larger than
or equal to the configured DPCH Minimum DL Power. If the newly
calculated transmit power is lower than the configured DPCH
Minimum DL Power, set it to be equal to the configured DPCH
Minimum DL Power.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-35..15)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
SrvType of WhiteTrfPc, MaxDlDpchPwr of WhiteTrfPc

2-1766
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the minimum DPCH
downlink transmit power for diamond subscribers.

Related factors: call drop rate and system capacity.
If the value is too low, the call drop rate may increase because the
excessive decrease of the power may cause the power to be unable
to return to normal level.
The call drop rate and system capacity for diamond subscribers
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
dpcchPilotEbN0
2-1767
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quality factor of the uplink DPCCH

pilot field for diamond subscribers, which is used for calculating the
uplink DPCCH power offset upon new call access.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-30..+30)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
the uplink DPCCH pilot field for diamond subscribers.

environments).
If the value is large, the service transmit power is high but the
If the value is small, the service transmit power is low and service
2-1768
SJ-20141209142030-013|2015-11-12 (R1.3)

The balance between service quality and system capacity for
Reason
diamond subscribers is considered because Eb/N0 of the DPCCH

pilot field varies with radio environments, and thus the average
value is recommended.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
maxUlDpchPwr
Managed Object

(UDiamondUserSrvPc)
3GPP Name
3GPP Reference
TS 25.331;
TS 25.423
2-1769
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the maximum DPCH uplink transmit power

allowed for diamond subscribers. When uplink inner loop power
control is performed, the transmit power newly calculated by a UE
may be larger than this parameter. In this case, the UE can only use
this parameter for transmitting signals.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
Unit
dBm
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum DPCH
uplink transmit power allowed for diamond subscribers.

Related factors: uplink service quality, system capacity, and uplink
coverage.
Normally, the maximum uplink transmit power of a UE is 24 dBm.
Reason
The default value is 33 dBm, which does not limit the uplink transmit
power of the UE.
Change Take Effect
2-1770
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulInitSIR
Managed Object

(UDiamondUserSrvPc)
3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the R99 service initial SIR target of the
uplink physical channel for diamond subscribers. The SIR target is
the criterion of uplink inner loop power control. The value affects the
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB

2-1771
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulMaxSIR, ulMinSIR, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the R99 service initial
SIR target of the uplink physical channel for diamond subscribers.

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1772
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
ulMaxSIR
Managed Object

(UDiamondUserSrvPc)
3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the maximum uplink target SIR of R99

service for diamond subscribers, which is used to restrict the range
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulInitSIR, ulMinSIR, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1773
SJ-20141209142030-013|2015-11-12 (R1.3)
SIR target of R99 service for diamond subscribers, and is used to

prevent the SIR target from increasing to an ultra-high value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMinSIR
Managed Object

(UDiamondUserSrvPc)
3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
2-1774
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the minimum uplink target SIR of R99

service for diamond subscribers, which is used to restrict the range
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulInitSIR, ulMaxSIR, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
SIR target of R99 service for diamond subscribers, and is used to

prevent the SIR target from decreasing to an extreme low value.
Reason
Change Take Effect
2-1775
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.54.15 BLER Target

Full Name
BLER Target
Abbreviated Name
blerTarget
Managed Object

(UDiamondUserSrvPc)
3GPP Name
3GPP Reference
TS 25.331;
TS 25.423
Description
This parameter indicates the Block Error Ratio (BLER) target

for diamond subscribers, and is the benchmark for outer loop
power control. In the case of a service with multiple subflows, this
value); the scalar value D in TS 25.331 is P*10; value configured in
the database = D+63; actual value configured on the UI is 10^P, and
is listed in exponential form, refer to the table in value range.
Calculation method:
BLEREVAL=1: 63;
S=[BLEREVAL; BLER]'
2-1776
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
(BLER) target for diamond subscribers.

Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1777
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
errorThresh
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

in outer loop power control that uses the threshold algorithm
for diamond subscribers. If the number of error blocks exceeds
the threshold within a period, the RNC increases the SIR target
immediately.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
Unit
TBs
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1778
SJ-20141209142030-013|2015-11-12 (R1.3)
threshold algorithm for diamond subscribers.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
blerAccpPeriod
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1779
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the error block tolerance period in

outer loop power control that uses the threshold algorithm for
diamond subscribers. If the tolerance period does not expire but
the number of error blocks is larger than the error block threshold,
the Signal-to-Interference Ratio (SIR) target is increased. If
the tolerance period expires and the number of error blocks is
smaller than the error block threshold, the SIR target is decreased.
Otherwise, the SIR target is not adjusted.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(1..65535)TBs, step 1TB
Unit
TBs
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
algorithm for diamond subscribers.
system capacity.
2-1780
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Upward (10ms E-TTI)
Abbreviated Name
thrHarqFailTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

for increasing the SIR target for diamond subscribers when E-TTI is
2-1781
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0..255
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
HARQ failure number for increasing the SIR target for diamond
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1782
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name

Upward (2ms E-TTI)
Abbreviated Name
thrHarqFailTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

for increasing the SIR target for diamond subscribers when E-TTI is
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0..255
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1783
SJ-20141209142030-013|2015-11-12 (R1.3)
HARQ failure number for increasing the SIR target for diamond
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

E-TTI)
Full Name
Abbreviated Name
nhrThrDownTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1784
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

(NHR) threshold for decreasing the SIR target for diamond
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..15), step 0.01
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters

1.For uplink services: nhrThrDownTti10[0]<= nhrThrDownTti10[1]<=
Parameters
nhrThrDownTti10[2].
2.For uplink services:
nhrThrDownTti10[2] <= nhrThrUpTti10[2].
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

diamond subscribers when E-TTI is 10 ms.
system capacity.
2-1785
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
nhrThrUpTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

(NHR) threshold for increasing the SIR target for diamond
Instance
Service Related
ZWF21-05-027
2-1786
SJ-20141209142030-013|2015-11-12 (R1.3)
VIP Qos
VIP Qos FG
(0..15), step 0.01
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters

1.For uplink services: NhrThrUpTti10[0]<= NhrThrUpTti10[1]<=
Parameters
NhrThrUpTti10[2].
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1787
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

(10ms E-TTI)
Full Name

E-TTI)
Abbreviated Name
upThrSampNumTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

the SIR target for diamond subscribers when E-TTI is 10 ms. The
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0..255
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
2-1788
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
number for increasing the SIR target for diamond subscribers when
E-TTI is 10 ms.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

(10ms E-TTI)
Abbreviated Name
dwThrSampNumTti10
Managed Object

(UDiamondUserSrvPc)
2-1789
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

decreasing the SIR target for diamond subscribers when E-TTI is 10
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0..255
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
number for decreasing the SIR target for diamond subscribers when
E-TTI is 10 ms.
system capacity.
2-1790
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
nhrThrDownTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

(NHR) threshold for decreasing the SIR target for diamond
Instance
Service Related
ZWF21-05-027
2-1791
SJ-20141209142030-013|2015-11-12 (R1.3)
VIP Qos
VIP Qos FG
(0..15), step 0.01
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters

1.For uplink services: NhrThrDownTti2[0] <= NhrThrDownTti2[1] <=
Parameters
NhrThrDownTti2[2]
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1792
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
nhrThrUpTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

(NHR) threshold for increasing the SIR target for diamond
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..15), step 0.01
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters

1.For uplink services: NhrThrUpTti2[0] <= NhrThrUpTti2[1] <=
Parameters
NhrThrUpTti2[2]
Data Type
2-1793
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No

system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

(2ms E-TTI)
Full Name

E-TTI)
Abbreviated Name
upThrSampNumTti2
Managed Object

(UDiamondUserSrvPc)
2-1794
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

the SIR target for diamond subscribers when E-TTI is 2 ms. The
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0..255
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
number for increasing the SIR target for diamond subscribers when
E-TTI is 2 ms.
system capacity.
2-1795
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

E-TTI)
Abbreviated Name
dwThrSampNumTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

decreasing the SIR target for diamond subscribers when E-TTI is 2
2-1796
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0..255
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
number for decreasing the SIR target for diamond subscribers when
E-TTI is 2 ms.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1797
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
ulOlPcQESwchSil
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

for diamond subscribers within the valid time window when the FP
mode is silent. If BLER-based OLPC is invalid, the OLPC that is
based on the BER of a transmission channel can be used.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
0: Off
1: On
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1798
SJ-20141209142030-013|2015-11-12 (R1.3)
OLPC is enabled or disabled for diamond subscribers within the

valid time window when the FP mode is silent.
satisfy blerAccpPeriod, which speeds up the decrease of the SIR
when the number of TBs satisfies blerAccpPeriod and the number of
error TBs is less than errorThresh, which slows down the decrease
Service quality is firstly considered.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
qePhyBerTarSil
Managed Object

(UDiamondUserSrvPc)
2-1799
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

within the valid time window when the FP mode is silent. The BER
target is used in QE-based outer loop power control. If QESelector
is set to Selected and a transmission channel BER is available,
the transmission channel BER is the base for QE of uplink data
frames. If no transport channel BER is available for the selected
DCH, the physical channel BER is used for QE. If QESelector is
set to "Non-selected", the physical channel BER is used for QE
of uplink data frames. If mixed services are used, the minimum
value in QePhyBerTarSil of each service is combined, and signaling
is excluded.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..100)%, step 0.1%
Unit
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1800
SJ-20141209142030-013|2015-11-12 (R1.3)
physical channel within the valid time window when the FP mode is
silent. The BER target is used in QE-based outer loop power control.
system capacity.
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

or Equal BER Target
Full Name

Equal BER Target
Abbreviated Name
qeCntThres
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1801
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the determination threshold for adjusting

the SIR target based on the number of times that the physical
channel BER is less than or equal to the BER target in the QE-based
uplink outer loop power control algorithm for diamond subscribers. If
the number of times that the physical channel BER is less than or
equal to the BER target is greater than or equal to the threshold, the
RNC decreases the SIR target immediately.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
1..20
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the determination
threshold for adjusting the SIR target based on the number of times
that the physical channel BER is less than or equal to the BER
target in the QE-based uplink outer loop power control algorithm
for diamond subscribers.
system capacity.
2-1802
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
edchHarqPOFdd
Managed Object

(UDiamondUserSrvPc)
3GPP Name
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the E-DCH HARQ power offset for diamond
subscribers in FDD mode. It is used to calculate the quantized
gain factor ed of E-DPDCH. For the detailed descriptions, refer to
TS25.214.
Instance
Service Related
2-1803
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-05-027
VIP Qos
VIP Qos FG
0..6
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
power offset for diamond subscribers in FDD mode. It is used to

calculate the quantized gain factor ed of E-DPDCH.
system capacity is.
system capacity is.
Reason
are considered.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1804
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
addiSIRDownStep
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
2-1805
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
initBlerSIR
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

target of R99 services for diamond subscribers in the SIR-target
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
2-1806
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
UDiamondUserSrvPc
Related Parameters
ulMinSIR, ulMaxSIR
For uplink service:
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
BLER-based SIR target of R99 services for diamond subscribers in

the SIR-target rapid convergence algorithm.
BLER target.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1807
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
initSirAdd
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
of R99 services for diamond subscribers in the SIR-target rapid
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulMinSIR, ulMaxSIR
For uplink service:
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1808
SJ-20141209142030-013|2015-11-12 (R1.3)
additional SIR target of R99 services for diamond subscribers in the

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulSirStep
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1809
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
target in the R99 algorithm based on the BLER target.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.3, 0.3, 0.3]dB
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
size of the uplink SIR target in the R99 algorithm based on the
BLER target.
Reason
Change Take Effect
No
How to Impact
N/A
2-1810
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
ulSirStepTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.1, 0.1, 0.1]dB
Related Parameters
N/A
N/A
Parameters
Data Type
2-1811
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
ulSirStepTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1812
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0.0..5.0)dB, step 0.1dB
Unit
dB
Default Value
[0.3, 0.3, 0.3]dB
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
2-1813
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
targetRetranNum
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

retransmissions.
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..15)
Unit
N/A
Default Value
[0, 0, 0]
Related Parameters
N/A
N/A
Parameters
Data Type
2-1814
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Related factors: service quality, system capacity, and maximum
number of E-DCH retransmissions.
The value of this parameter should be less than or equal to the
maximum number of E-DCH transmissions.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Target (2ms E-TTI)
Abbreviated Name
fpTargErrorTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
2-1815
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..100)%, step 0.1%
Unit
Default Value
[10%, 10%, 10%]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
2-1816
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Target (10ms E-TTI)
Abbreviated Name
fpTargErrorTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..100)%, step 0.1%
Unit
Default Value
[1%, 1%, 1%]

2-1817
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Abbreviated Name
berTargetUpThres
Managed Object

(UDiamondUserSrvPc)
2-1818
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER threshold for increasing the

SIRtarget in the periodic BER-based OLPC algorithm. When
the periodic BER-based OLPC takes effect, if the consecutive
berCntThres BERs are greater than this threshold, the SIRtarget
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..100)%, step 0.1%
Unit
Default Value
UDiamondUserSrvPc
Related Parameters
BerTargetDnThres
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
increasing SIR target in the periodic BER-based OLPC algorithm.

When the periodic BER-based OLPC takes effect, if the consecutive
berCntThres BERs are greater than this threshold, the SIRtarget
2-1819
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name

Abbreviated Name
berTargetDnThres
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the BER threshold for decreasing the

SIR target in the periodic BER-based OLPC algorithm. When
the periodic BER-based OLPC takes effect, if the consecutive
2-1820
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(0..100)%, step 0.1%
Unit
Default Value
UDiamondUserSrvPc
Related Parameters
BerTargetUpThres
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
decreasing SIR target in the periodic BER-based OLPC algorithm.

When the periodic BER-based OLPC takes effect, if the consecutive
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1821
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
berCntThres
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the number of times for

triggering SIR target adjustments. In the periodic BER based OLPC,
if the continuous BERs satisfy the SIR target increase (or decrease)
requirement, and the BER number reaches the threshold, the SIR
target can be increased (or decreased).
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
1..20
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1822
SJ-20141209142030-013|2015-11-12 (R1.3)
number of times for triggering SIR target adjustments.

Related factors: The quality of service and the system capacity
must be considered.
If the value is too high, the SIR target adjustment is difficult to be
triggered when the periodic BER based algorithm is effective, which
cannot satisfy the requirement of radio condition change. When the
BER algorithm is enabled, if the SIR target is low, the service quality
may be reduced. If the SIR target is high, the system capacity may
be decreased due to power waste.
the rapid BER change when the periodic BER based algorithm is
effective. In this case, the service quality or system capacity may
be affected because the SIR does not reflect the change of the real
radio condition.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulInitSIRTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
UL SIR Target
2-1823
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.433
Description

target of the uplink physical channel for diamond subscribers. The
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulMaxSIRTti10, ulMinSIRTti10, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
service initial SIR target of the uplink physical channel for diamond
subscribers.
2-1824
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMaxSIRTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description

TTI HSUPA service for diamond subscribers, which is used to
Instance
Service Related
2-1825
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulInitSIRTti10, ulMinSIRTti10, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
target SIR of 10 ms TTI HSUPA service for diamond subscribers,

and is used to prevent the SIR target from increasing to an ultra-high
value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1826
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
ulMinSIRTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
Description

TTI HSUPA service for diamond subscribers, which is used to
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulInitSIRTti10, ulMaxSIRTti10, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-1827
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
target SIR of 10 ms TTI HSUPA service for diamond subscribers,

and is used to prevent the SIR target from decreasing to an ultra-low
value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initBlerSIRTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1828
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

target of 10 ms TTI HSUPA services for diamond subscribers in the
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
For uplink service:
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
BLER-based SIR target of 10 ms TTI HSUPA services for diamond

BLER target.
2-1829
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initSirAddTti10
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
2-1830
SJ-20141209142030-013|2015-11-12 (R1.3)
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
For uplink service:
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
additional SIR target of 10 ms TTI HSUPA services for diamond

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1831
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
ulInitSIRTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
Description

target of the uplink physical channel for diamond subscribers. The
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulMaxSIRTti2, ulMinSIRTti2, srvType of UDiamondUserSrvPc
Parameters
Data Type
2-1832
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
service initial SIR target of the uplink physical channel for diamond
subscribers.
The initial SIR target of the service should be close to the normal
level of the SIR target to speed up the initial convergence of the
SIR target.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMaxSIRTti2
Managed Object

(UDiamondUserSrvPc)
2-1833
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the maximum uplink target SIR of 2 ms TTI

HSUPA service for diamond subscribers, which is used to restrict
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulInitSIRTti2, ulMinSIRTti2, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
target SIR of 2 ms TTI HSUPA service for diamond subscribers, and

is used to prevent the SIR target from increasing to an ultra-high
value.
2-1834
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMinSIRTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the minimum uplink target SIR of 2 ms TTI

HSUPA service for diamond subscribers, which is used to restrict
Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
2-1835
SJ-20141209142030-013|2015-11-12 (R1.3)
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
ulInitSIRTti2, ulMaxSIRTti2, srvType of UDiamondUserSrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
target SIR of 2 ms TTI HSUPA service for diamond subscribers, and

is used to prevent the SIR target from decreasing to an ultra-low
value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1836
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
initBlerSIRTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
For uplink service:
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1837
SJ-20141209142030-013|2015-11-12 (R1.3)
BLER-based SIR target of 2 ms TTI HSUPA services for diamond

BLER target.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initSirAddTti2
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
2-1838
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
Service Related
ZWF21-05-027
VIP Qos
VIP Qos FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
UDiamondUserSrvPc
Related Parameters
For uplink service:
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
the additional SIR target of 2 ms TTI HSUPA services for diamond

2-1839
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
sirRapidConvSwi
Managed Object

(UDiamondUserSrvPc)
3GPP Name
N/A
3GPP Reference
N/A
Description

rapid convergence for diamond subscribers. If the function is
enabled, the initial SIR target can be rapidly decreased to the SIR
target based on the BLER.
Instance
ZWF21-05-027
VIP Qos
2-1840
SJ-20141209142030-013|2015-11-12 (R1.3)
VIP Qos FG
0: Off;
1: On
Unit
N/A
Default Value
UDiamondUserSrvPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
Yes
switch for SIR-target rapid convergence for diamond subscribers.

decreased to the SIR target based on the BLER.
of the service.
Adjustment suggestion: The service quality is considered first for
reserved subscribers. It is recommended to turn off the switch.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1841
SJ-20141209142030-013|2015-11-12 (R1.3)
2.55 Power Control Related to Service and Diversity

Mode(USrvDivPc)
2.55.1 Power Control Related to Service and Diversity Mode Object
ID
Full Name
Power Control Related to Service and Diversity Mode Object ID
Abbreviated Name
USrvDivPcId
Managed Object
Power Control Related to Service and Diversity Mode(USrvDivPc)

3GPP Name
N/A
3GPP Reference
N/A
Description

to diversity mode and service type.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-1842
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
Related to Service->Power Control Related to Service->Power
Control Related to Service and Diversity Mode
N/A
N/A
2.55.2 Transmit Diversity Mode

Full Name
Transmit Diversity Mode
Abbreviated Name
txDivMod
Managed Object

3GPP Name
Diversity Mode; Transmit Diversity Indicator
3GPP Reference
TS 25.433;
TS 25.423;
TS 25.211
Description
This parameter indicates the transmit diversity mode used by this

set of power control parameters that are related to the diversity
mode and service.
Instance
UTRAN Cell, Service and Diversity Mode Related
ZWF21-04-009
Power Control
Power Control FG
0: None
1: STTD
2: Closed Loop Mode 1
Unit
N/A
Default Value
DivPc
Related Parameters
N/A
2-1843
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the transmit diversity
mode used by this set of power control parameters that are related
to the diversity mode and service.
Related factors: whether transmit diversity is in use and which
diversity mode is in use.
be modified.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
maxDlDpchPwr
Managed Object

3GPP Name
2-1844
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the maximum DPCH downlink transmit

power. When downlink inner loop power control is performed, the
new transmit power must be smaller than or equal to the configured
DPCH Maximum DL Power. If the newly calculated transmit power
is larger than the configured DPCH Maximum DL Power, set it to
be equal to the configured one.
Instance
ZWF21-04-005
ZWF21-04-009
ZWF21-04-013

Power Control
Power Control FG
(-35..15)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
minDlDpchPwr, srvType of SrvPc
2-1845
SJ-20141209142030-013|2015-11-12 (R1.3)
For downlink services,
Parameters
maxDlDpchPwr[0]>=minDlDpchPwr[0];
maxDlDpchPwr[8]>=minDlDpchPwr[8].
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum
downlink DPCH transmit power.

Related factors: service quality and cell capacity. Configuration rule:
This parameter should ensure that the minimum power requirement
of UEs at the edge of the cell is met so that the maximum path loss
can be overcome.
If the maximum transmit power of the service is too high, the service
obtains a very high transmit power when the radio signal is very
poor, and the cell capacity is reduced.
If the maximum transmit power of the service is too low, the
transmit power of the service cannot satisfy requirements in different
conditions.
Reason
capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-1846
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
minDlDpchPwr
Managed Object

3GPP Name
Minimum DL Power
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the minimum DPCH downlink transmit

power. When downlink inner loop power control is performed, the
new transmit power must be larger than or equal to the configured
DPCH Minimum DL Power. If the newly calculated transmit power
is lower than the configured DPCH Minimum DL Power, set it to
be equal to the configured one.
Instance

ZWF21-04-009
ZWF21-04-013
Power Control
Power Control FG/ Load Adaptive Power Control FG
(-35..15)dB, step 0.1dB
Unit
dB
Default Value
DivPc
2-1847
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
maxDlDpchPwr, srvType of SrvPc
For downlink services,
Parameters
maxDlDpchPwr[8]>=minDlDpchPwr[8].
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the minimum downlink
DPCH transmit power.

Related factors: service dropped-call rate and cell capacity.
If the value is too low, the dropped-call rate may increase because
the excessive decrease of the power may cause the power to be
unable to return to normal level.
The service dropped-call rate and the system capacity are
Reason
considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1848
SJ-20141209142030-013|2015-11-12 (R1.3)
2.55.5 DPCH PO1

Full Name
DPCH PO1
Abbreviated Name
dpchPO1
Managed Object

3GPP Name
PO1
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset between the downlink

DPCH TFCI field and the DPCH data field.
Instance

ZWF21-04-009
ZWF21-04-013
Power Control
(0..6)dB, step 0.25dB
Unit
dB
Default Value
DivPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-1849
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
between the downlink DPCH TFCI field and the DPCH data field.
Related factors: service quality and cell capacity. Because the
control field is the foundation of correctly demodulating data field
information, the power of the control field is higher than that of the
data field.
If the parameter value is too small, TFCI information cannot be
demodulated correctly and service quality is affected.
If the parameter value is too large, power is wasted and cell capacity
is affected.
Adjustment suggestion: When the cell downlink capacity is limited,
the value of this parameter can be reduced.
Reason
capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.55.6 DPCH PO2

Full Name
DPCH PO2
Abbreviated Name
dpchPO2
Managed Object

3GPP Name
PO2
3GPP Reference
TS 25.423;
TS 25.433
2-1850
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the power offset between the DL DPCH

TPC field and the DPCH data field.
Instance
ZWF21-04-009
ZWF21-04-013
Power Control
OMCR: (0..6)dB, step 0.25dB; RNC: D=P*40..24
Unit
dB
Default Value
DivPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
DL DPCH TPC field relative to the DPCH data field.

Related factors: service quality and cell capacity.
Because the control field is the foundation of correctly demodulating
data field information, the power of the control field is higher than
that of the data field.
If the parameter value is too small, TPC information cannot be
demodulated correctly and the service quality is affected.
If the parameter value is too large, power is wasted and the cell
2-1851
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.55.7 DPCH PO3

Full Name
DPCH PO3
Abbreviated Name
dpchPO3
Managed Object

3GPP Name
PO3
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset between the DL DPCH

pilot field and the DPCH data field.
2-1852
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance

ZWF21-04-009
ZWF21-04-013
Power Control
OMCR: (0..6)dB, step 0.25dB; RNC: D=P*40..24
Unit
dB
Default Value
DivPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
DL DPCH pilot field relative to the DPCH data field.

Related factors: service quality and cell capacity.
Because the control field is the foundation of correctly demodulating
data field information, the power of the control field is higher than
that of the data field.
If the parameter value is too small, pilot information cannot be
demodulated correctly and the service quality is affected.
If the parameter value is too large, power is wasted and the cell
Reason
capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1853
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
dpcchPilotEbN0
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quality factor of the uplink DPCCH pilot
field, which is used for calculating the uplink DPCCH power offset
upon new call access.
Instance
ZWF21-04-009
ZWF21-04-013
Power Control
(-30..+30)dB, step 0.1dB
Unit
dB
2-1854
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
DivPc
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
the uplink DPCCH pilot field.

environments).
If the value is large, the service transmitted power is high but the
If the value is small, the service transmit power is low and service
The balance between service quality and system capacity is
Reason
considered because Eb/N0 of the DPCCH pilot field varies with

radio environments, and thus the average value is recommended.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

2-1855
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
maxUlDpchPwr
Managed Object

3GPP Name
3GPP Reference
TS 25.331;
TS 25.423
Description
This parameter indicates the maximum DPCH uplink transmit

power allowed for a UE. When uplink inner loop power control is
performed, the transmit power newly calculated by a UE may be
larger than this parameter. In this case, the UE can only use this
parameter for transmitting signals.
Instance

ZWF21-04-005
ZWF21-04-009
ZWF21-04-013

Power Control
Power Control FG
Unit
dBm
Default Value
DivPc
Related Parameters
N/A
2-1856
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
transmit power allowed for a UE.

Related factors: uplink service quality, cell capacity, and uplink
coverage.
Normally, the maximum uplink transmit power of a UE is 24 dBm,
Reason
while the default value is 33 dBm. The purpose is to not limit the
uplink transmit power of the UE.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulInitSIR
2-1857
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the initial SIR target of the uplink physical
channel of the R99 service. The SIR target is the criterion of uplink
inner loop power control. The value affects the convergence speed
of power control.
Instance
ZWF21-04-009
ZWF21-04-016
ZWF21-04-013
Power Control
Power Control FG / Power Control Algorithm Enhancement FG /

(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulMaxSIR, ulMinSIR, srvType of SrvPc
2-1858
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
ulMaxSIR[8]>ulInitSIR[8]>ulMinSIR[8].
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the initial SIR target of
the uplink physical channel of the R99 service.

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1859
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
ulMaxSIR
Managed Object

3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the maximum uplink SIR target of the R99
service, which is used to restrict the range of the SIR target in outer
loop power control.
Instance

ZWF21-04-009
ZWF21-04-016
ZWF21-04-013
Power Control

(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulInitSIR, ulMinSIR, srvType of SrvPc
2-1860
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
SIR target, and is used to prevent the SIR target from increasing to
an ultra-high value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1861
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
ulMinSIR
Managed Object

3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
Description
This parameter indicates the minimum uplink SIR target of the R99
service, which is used to restrict the range of the SIR target in outer
loop power control.
Instance

ZWF21-04-009
ZWF21-04-016
ZWF21-04-013
Power Control

(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulInitSIR, ulMaxSIR, srvType of SrvPc
2-1862
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
SIR target of the R99 service, and is used to prevent the SIR target
from decreasing to an extreme low value.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1863
SJ-20141209142030-013|2015-11-12 (R1.3)
2.55.13 E-AGCH Power Offset for TTI 2ms

Full Name
E-AGCH Power Offset for TTI 2ms
Abbreviated Name
eagchPOTti2
Managed Object

3GPP Name
E-AGCH Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset configured for the

E-AGCH in 2 ms E-TTI, and is relative to the DL DPCCH pilot field.
Instance
ZWF25-04-006
(-32 .. +31.75)dB, step 0.25dB
Unit
dB
Default Value
DivPc
Related Parameters
eagchPOTti10, srvType of SrvPc
For downlink services, eagchPOTti2>eagchPOTti10
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
configured for the E-AGCH in 2 ms E-TTI, and is relative to the DL

DPCH pilot field.
Related factors: This parameter should ensure that the E-AGCH
power (for 2 ms TTI) is large enough to satisfy the minimum
requirement for E-AGCH detection (according to the 3GPP 25.101
protocol, BLER should be equal to or less than 1 percent). The
system capacity should also be considered.
If the parameter value is too small, the minimum requirement for
E-AGCH performance cannot be satisfied.
If the parameter value is too large, power is wasted and system
2-1864
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value meets the minimum requirement for E-AGCH
Reason
performance described in the 3GPP 25.101 protocol, and meets

the system capacity requirement.
Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.55.14 E-AGCH Power Offset for TTI 10ms

Full Name
E-AGCH Power Offset for TTI 10ms
Abbreviated Name
eagchPOTti10
Managed Object

3GPP Name
E-AGCH Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the power offset configured for the

E-AGCH in 10 ms E-TTI, and is relative to the DL DPCCH pilot field.
Instance
ZWF25-04-006
(-32 .. +31.75)dB, step 0.25dB
Unit
dB
2-1865
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
DivPc
Related Parameters
eagchPOTti2, srvType of SrvPc
For downlink services, eagchPOTti2>eagchPOTti10
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
configured for the E-AGCH in 10 ms E-TTI, and is relative to the

DL DPCH pilot field.
Related factors: This parameter should ensure that the E-AGCH
requirement for E-AGCH detection (according to the 3GPP 25.101
protocol, BLER is equal to or less than 1 percent). The system
capacity should also be considered.
E-AGCH performance cannot be satisfied.
The default value meets the minimum requirement for E-AGCH
Reason

Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1866
SJ-20141209142030-013|2015-11-12 (R1.3)
2.55.15 E-RGCH Power Offset for TTI 2ms in Single Link Condition
Full Name
E-RGCH Power Offset for TTI 2ms in Single Link Condition
Abbreviated Name
ergchPOTti2
Managed Object

3GPP Name
E-RGCH Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the E-RGCH power offset configured for 2

ms TTI, and is relative to pilot bits on the downlink DPCCH.
Instance
ZWF25-04-006
(-32 .. +31.75)dB, step 0.25dB
Unit
dB
Default Value
DivPc
Related Parameters
ergchPOTti10, srvType of SrvPc
For downlink services, ergchPOTti2>ergchPOTti10
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
configured for the E-RGCH in the 2 ms TTI and single link

conditions, and is relative to the DL DPCH pilot field.
Related factors: This parameter should ensure that the E-RGCH
requirement for E-RGCH (according to the 3GPP 25.101 protocol,
MISS UP should be equal to or less than 5 percent). The system
E-RGCH performance cannot be satisfied.
2-1867
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value meets the minimum requirement for E-RGCH
Reason

Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.55.16 E-RGCH Power Offset for TTI 10ms in Single Link Condition
Full Name
E-RGCH Power Offset for TTI 10ms in Single Link Condition
Abbreviated Name
ergchPOTti10
Managed Object

3GPP Name
E-RGCH Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the E-RGCH power offset configured for

10 ms TTI, and is relative to the DL DPCCH pilot field.
Instance
ZWF25-04-006
(-32 .. +31.75)dB, step 0.25dB
Unit
dB
2-1868
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
DivPc
Related Parameters
ergchPOTti2, srvType of SrvPc
For downlink services, ergchPOTti2>ergchPOTti10
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
configured for the E-RGCH in the 10 ms TTI and single link

Related factors: This parameter should ensure that the E-RGCH
requirement for E-RGCH (according to the 3GPP 25.101 protocol,
MISS UP should be equal to or less than 5 percent). The system
E-RGCH performance cannot be satisfied.
The default value meets the minimum requirement for E-RGCH
Reason

Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1869
SJ-20141209142030-013|2015-11-12 (R1.3)
2.55.17 E-HICH Power Offset for TTI 2ms in Single Link Condition
Full Name
E-HICH Power Offset for TTI 2ms in Single Link Condition
Abbreviated Name
ehichPOTti2
Managed Object

3GPP Name
E-HICH Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the E-HICH power offset configured in

the 2 ms TTI and single link conditions, and is relative to the DL
DPCCH pilot field.
Instance
ZWF25-04-006
(-32 .. +31.75)dB, step 0.25dB
Unit
dB
Default Value
DivPc
Related Parameters
ehichPOTti10, srvType of SrvPc
For downlink services, ehichPOTti2>ehichPOTti10
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
configured for the E-HICH in the 2 ms TTI and single link conditions,
and is relative to the DL DPCH pilot field.
Related factors: This parameter should ensure that the E-HICH
requirement for E-HICH (according to the 3GPP 25.101 protocol,
MISS ACK should be equal to or less than 1 percent). The system
E-HICH performance cannot be satisfied.
2-1870
SJ-20141209142030-013|2015-11-12 (R1.3)

The default value meets the minimum requirement for E-HICH
Reason

Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.55.18 E-HICH Power Offset for TTI 10ms in Single Link Condition
Full Name
E-HICH Power Offset for TTI 10ms in Single Link Condition
Abbreviated Name
ehichPOTti10
Managed Object

3GPP Name
E-HICH Power Offset
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the E-HICH power offset configured in

the 10 ms TTI and single link conditions, and is relative to the DL
DPCCH pilot field.
Instance
ZWF25-04-006
2-1871
SJ-20141209142030-013|2015-11-12 (R1.3)
(-32 .. +31.75)dB, step 0.25dB
Unit
dB
Default Value
DivPc
Related Parameters
ehichPOTti2, srvType of SrvPc
For downlink services, ehichPOTti2>ehichPOTti10
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
configured for the E-HICH in the 10 ms TTI and single link

Related factors: This parameter should ensure that the E-HICH
power in the single link condition (for 10 ms TTI) is large enough
to satisfy the minimum requirement for E-HICH (according to the
3GPP 25.101 protocol, MISS ACK should be equal to or less than 1
percent). The system capacity should also be considered.
E-HICH performance cannot be satisfied.
The default value meets the minimum requirement for E-HICH
Reason

Change Take Effect

Request)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-1872
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.55.19 SCCPCH Power for Single Cell Reception

Full Name
SCCPCH Power for Single Cell Reception
Abbreviated Name
pwrForSglCell
Managed Object

3GPP Name
Max FACH Power
3GPP Reference
TS 25.433
Description
This parameter indicates the transmit power of the MTCH-bearing

SCCPCH when the cell is in island status.
UEs can receive the same service from multiple neighboring cells
transmitting the same MBMS service and benefit from the soft
combination or selective combination, which requires less SCCPCH
transmission power. However, in the case when none neighboring
cells transmit the same service, UEs are in island status. In this
case, the RNC should use the power indicated by this parameter to
meet the QoS requirements of the MBMS service.
Instance
ZWF24-01-033
MBMS FG
(-35..15)dB, step 1
Unit
dB
Default Value
DivPc
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1873
SJ-20141209142030-013|2015-11-12 (R1.3)
indicates the SCCPCH transmit power (dB) in the case of single

cell reception.
Related factors: MBMS service quality and cell capacity when the
cell in single cell status.
Adjustment suggestion: When the cell is in single cell status, there
is no soft or selective combination gain. Therefore, the SCCPCH
power should be relatively large.
If the parameter value is too small, the MBMS service quality is
lowered when the cell is in dingle cell status.
If the parameter value is too large, the cell capacity is decreased.
The MBMS service quality and cell capacity when the cell is in the
Reason
single cell status are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.55.20 SCCPCH Power for Cell in Half-island Status

Full Name
SCCPCH Power for Cell in Half-island Status
Abbreviated Name
pwrForHalfIsd
Managed Object

3GPP Name
Max FACH Power
3GPP Reference
TS 25.433
2-1874
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the transmit power of the MTCH-bearing

SCCPCH when the local cell is in semi-island status. The RNC
should use the power indicated by this parameter when the cell
is in semi-island status, which means only few neighboring cells
are transmitting the same MBMS service and the gain of soft or
selective combination is small.
Instance
ZWF24-01-033
MBMS FG
(-8..0)dB, step 1dB
Unit
dB
Default Value
DivPc
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
indicates the SCCPCH transmit power for the cell that is in

half-island status.
Related factors: MBMS service quality and cell capacity when the
cell is in half-island status.
Adjustment suggestion: When the cell is in half-island status, only
few neighboring cells are transmitting the same MBMS service and
the gain of soft or selective combination is small. Therefore, the
SCCPCH transmit power cannot be too small.
If the parameter value is too small, the MBMS service quality is
lowered when the cell is in half-island status.
If the parameter value is too big, the cell capacity is decreased.
When the cell does not support MBMS, this parameter is invalid.
The MBMS service quality and cell capacity when the cell is in the
Reason
half-island status are considered.
Change Take Effect
No
2-1875
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
initBlerSIR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

target of R99 services in the SIR-target rapid convergence algorithm.
Instance
ZWF21-04-016
ZWF21-04-013

2-1876
SJ-20141209142030-013|2015-11-12 (R1.3)

Control FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulMinSIR, ulMaxSIR
For uplink service:
Parameters
ulMinSIR[8]<=initBlerSIR[8]+initSirAdd[8]<=ulMaxSIR[8]
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
the BLER-based SIR target of R99 services in the SIR-target rapid

Related factors: uplink synchronization and the uplink cell capacity.
If the value is too low, uplink synchronization requires a longer time
and even may fail because the transmit power is too low in the initial
normal level of the SIR target that meets the need of the service
BLER target.
The default setting is based on the uplink synchronization and the
Reason
uplink cell capacity.
Change Take Effect
New Connection
No
How to Impact
N/A
2-1877
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
initSirAdd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
of R99 services in the SIR-target rapid convergence algorithm.
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(-8.2..17.3)dB, step 0.1dB
2-1878
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
DivPc
Related Parameters
ulMinSIR, ulMaxSIR
For uplink service:
Parameters
ulMinSIR[8]<=initBlerSIR[8]+initSirAdd[8]<=ulMaxSIR[8]
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
the additional SIR target of R99 services in the SIR-target rapid

of the service can be set to a higher value when the setup success
rate of the service is lower.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1879
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulInitSIRTti10
Managed Object

3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the 10 ms TTI HSUPA service initial

SIR target of the uplink physical channel. The SIR target is the
criterion of uplink inner loop power control. The value affects the
Instance
ZWF25-04-006
ZWF21-04-016
ZWF21-04-013

2-1880
SJ-20141209142030-013|2015-11-12 (R1.3)
HSUPA Introduction FG / Power Control Algorithm Enhancement

FG / Load Adaptive Power Control FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulMaxSIRTti10, ulMinSIRTti10, srvType of SrvPc
Parameters
ulMaxSIRTti10[8]>ulInitSIRTti10[8]>ulMinSIRTti10[8].
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
service initial SIR target of the uplink physical channel.

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1881
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMaxSIRTti10
Managed Object

3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
Description

TTI HSUPA service, which is used to restrict the range of the SIR
target in outer loop power control.
Instance
ZWF25-04-006
ZWF21-04-016
ZWF21-04-013


2-1882
SJ-20141209142030-013|2015-11-12 (R1.3)
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulInitSIRTti10, ulMinSIRTti10, srvType of SrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
SIR target of the 10 ms TTI HSUPA service, and is used to prevent

the SIR target from increasing to an ultra-high value.
The larger the setting, the larger the SIR target. This may cause a
higher uplink transmit power and affect the system capacity.
The smaller the setting, the smaller the SIR target. This may cause
the uplink demodulation requirement not to be satisfied, which
affects the service quality and uplink coverage.
The default value is set based on the service quality and uplink
Reason
capacity of the system.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1883
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMinSIRTti10
Managed Object

3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
Description

Instance
ZWF25-04-006
ZWF21-04-016
ZWF21-04-013


2-1884
SJ-20141209142030-013|2015-11-12 (R1.3)
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulInitSIRTti10, ulMaxSIRTti10, srvType of SrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

the SIR target from decreasing to an ultra-low value.
If the value is too large, the SIR target cannot decrease to a proper
value. This may cause a higher transmit power and affect the
system capacity.
If the value is too small, the SIR target may be too small, which may
take a longer time for it to increase from the minimum value to the
value at the normal working level and affect the system capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1885
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initBlerSIRTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the initial value of the BLER-based

SIR target of 10 ms TTI HSUPA services in the SIR-target rapid
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(-8.2..17.3)dB, step 0.1dB
2-1886
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
DivPc
Related Parameters
For uplink service:
Parameters
ulMinSIRTti10[8]<=initBlerSIRTti10[8]+initSirAddTti10[8]<=ulMaxSIRTti10[8]
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
the BLER-based SIR target of 10 ms TTI HSUPA services in the

BLER target.
Reason
Change Take Effect
New Connection
2-1887
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initSirAddTti10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
of 10 ms TTI HSUPA services in the SIR-target rapid convergence
algorithm.
Instance

ZWF21-04-016
ZWF21-04-013
2-1888
SJ-20141209142030-013|2015-11-12 (R1.3)


Control FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
For uplink service:
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
additional SIR target of 10 ms TTI HSUPA services in the SIR-target

2-1889
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulInitSIRTti2
Managed Object

3GPP Name
UL SIR Target
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the 2 ms TTI HSUPA service initial

SIR target of the uplink physical channel. The SIR target is the
criterion of uplink inner loop power control. The value affects the
2-1890
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
ZWF25-04-006
ZWF21-04-016
ZWF21-04-013


(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulMaxSIRTti2, ulMinSIRTti2, srvType of SrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1891
SJ-20141209142030-013|2015-11-12 (R1.3)
service initial SIR target of the uplink physical channel.

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMaxSIRTti2
Managed Object

3GPP Name
Maximum Uplink SIR
3GPP Reference
TS 25.423
2-1892
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
ZWF25-04-006
ZWF21-04-016
ZWF21-04-013


(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulInitSIRTti2, ulMinSIRTti2, srvType of SrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-1893
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

the SIR target from increasing to an ultra-high value.
The larger the setting, the larger the SIR target. This may cause a
higher uplink transmit power and affect the system capacity.
The smaller the setting, the smaller the SIR target. This may cause
the uplink demodulation requirement not to be satisfied, which
affects the service quality and uplink coverage.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
ulMinSIRTti2
Managed Object

3GPP Name
Minimum Uplink SIR
3GPP Reference
TS 25.423
2-1894
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
ZWF25-04-006
ZWF21-04-016
ZWF21-04-013


(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
ulInitSIRTti2, ulMaxSIRTti2, srvType of SrvPc
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-1895
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

the SIR target from decreasing to an ultra-low value.
If the value is too large, the SIR target cannot decrease to a proper
value. This may cause a higher transmit power and affect the
system capacity.
If the value is too small, the SIR target may be too small, which may
take a longer time for it to increase from the minimum value to the
value at the normal working level and affect the system capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initBlerSIRTti2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-1896
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the initial value of the BLER-based

SIR target of 2 ms TTI HSUPA services in the SIR-target rapid
Instance
ZWF21-04-016
ZWF21-04-013


Control FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
For uplink service:
Parameters
2-1897
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
the BLER-based SIR target of 2 ms TTI HSUPA services in the

BLER target.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
Full Name
Abbreviated Name
initSirAddTti2
2-1898
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
of 2 ms TTI HSUPA services in the SIR-target rapid convergence
algorithm.
Instance

ZWF21-04-016
ZWF21-04-013


Control FG
(-8.2..17.3)dB, step 0.1dB
Unit
dB
Default Value
DivPc
Related Parameters
For uplink service:
Parameters
2-1899
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
additional SIR target of 2 ms TTI HSUPA services in the SIR-target

Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1900
SJ-20141209142030-013|2015-11-12 (R1.3)
2.56 Iub Link(UIubLink)

2.56.1 Used Module
Full Name
Used Module
Abbreviated Name
refModule
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates reference to Module object.
Instance
RNC
N/A
N/A
Basic ID parameter
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates reference to Module object.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-1901
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration->Iub

Link
N/A
N/A
2.56.2 Process Id of NodeB Attached CCMP

Full Name
Process Id of NodeB Attached CCMP
Abbreviated Name
procInstancNo
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the process ID to which the Node B

belongs in the CCMP module.
Instance
RNC
N/A
N/A
Basic Id Parameter
V4: 1..DBS_RR_MAX_NUM_PROC
V3: 1
DBS_RR_MAX_NUM_PROC is 6
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1902
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the process ID to
which the Node B belongs in the CCMP module. Configuration

rule: This parameter must be configured depending on the network
deployment. In addition, the following conditions must be met: The
number of Node Bs in the same Proc of the same module cannot
exceed DBS_RR_MAX_NUM_NODEB_PER_RROC (V3: 500, V4:
200).
The BHCA load should be balanced among Procs on the same
board.
N/A
Reason
Change Take Effect
Yes
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.3 NodeB Type

Full Name
NodeB Type
Abbreviated Name
nodeBType
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Node B type.
Instance
Node B
ZWF21-20-002
Node B Resource Management
Node B Resource Management FG
2-1903
SJ-20141209142030-013|2015-11-12 (R1.3)
0: General NodeB
1: Pico Node B
2: Home NodeB
Unit
N/A
Default Value
0: General NodeB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Configuration Rule: Generally, this parameter is set to "General
NodeB"
Suggestion for setting this parameter: not suggest to adjust
The parameter should be set to "General NodeB"
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.4 Co-NodeB HS-PDSCH Code Sharing Method

Full Name
Co-NodeB HS-PDSCH Code Sharing Method
Abbreviated Name
hsSharMethod
Managed Object
Iub Link(UIubLink)
2-1904
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the control method to share the HS-PDSCH

channelization codes among the cells of the same Node B.
Instance
Node B
ZWF23-04-021
Code Sharing between Cells
Code Sharing between Cells FG
0: Not Sharing
1: RNC Control
Unit
N/A
Default Value
0: Not Sharing
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates the control method to share the
HS-PDSCH channelization codes among the cells of the same

Node B.
Configuration Rule: HSDPA traffic load of the cells of the same
Node B
Adjustment Suggestion: If the total HSDPA traffic load of the cells of
the same Node B is not higher than the maximum capacity of these
cells, the parameter could be set to "Sharing".
This function could save the operator capex. But the hardware
resource for each cell is less than the normal cell so the HSDPA
through will be lower than the normal cell. So it is suggested not to
support this function in hot area.
Usually, it should be set to "Not sharing" unless the operator is
Reason
required to use this function.
Change Take Effect
No
2-1905
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.5 Support Iub HS-DSCH Congestion Detection Indicator

Full Name
Support Iub HS-DSCH Congestion Detection Indicator
Abbreviated Name
hsdschSuptCgtDetInd
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
In HS-DSCH congestion control, the SRNC detects congestion

(such as packet loss) in the downlink transport network between
the SRNC and the NodeB for a PS service over HS-DSCH. If
downlink congestion is detected, the SRNC will adjust the downlink
throughput by controlling the service rate. After the transport
network is relieved, the SRNC controls the service rate to recover
the downlink throughput. The HS-DSCH congestion control function
allows the SRNC to adjust the downlink throughput in time when
detecting downlink traffic fluctuation in the transport network to avoid
a continuous decline in service quality due to network congestion.
This parameter determines whether to enable the HS-DSCH
congestion control function between the RNC and a NodeB. This
function can be enabled when the downlink packet loss ratio is high
in the transport network between the RNC and the NodeB.
Instance
Node B
ZWF23-05-002
HSDPA Flow Control
Overbooking on Iux FG
0: Not Supported
1: Supported
Unit
N/A
2-1906
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
This parameter can be set to "Supported" for a NodeB when the
following conditions are met:

1: The NodeB supports the HS-DSCH congestion control function.
2: The parameter UIubLink.timeDelay is configured to an
appropriate value that matches the transport delay between the
RNC and the NodeB.
If the parameter is set to "Supported" for the NodeB, the PS service
rate over HS-DSCH will be controlled when downlink congestion
occurs in the transport network between the SRNC and the NodeB.
This function can be enabled when the downlink packet loss ratio is
high in the transport network between the RNC and the NodeB.
The default is set to "Not Supported" because the HS-DSCH
Reason
congestion control function is not stable in most Node Bs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.6 Support Iub E-DCH Congestion Detection Indicator

Full Name
Support Iub E-DCH Congestion Detection Indicator
Abbreviated Name
edchSuptCgtDetInd
2-1907
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
In E-DCH congestion control, the SRNC detects congestion (such

as packet loss) in the uplink transport network between the SRNC
and the NodeB for a packet service over E-DCH. When transmission
network congestion is either detected or relieved, the rate control of
the service may try to be performed to adjust the uplink throughput.
The E-DCH congestion control function allows the RNS to adjust the
uplink throughput in time when detecting uplink traffic fluctuation
in the transport network to avoid a continuous decline in service
quality due to network congestion.
This parameter determines whether to enable the E-DCH congestion
control function between the RNC and a NodeB. This function can
be enabled when the uplink packet loss ratio is high in the transport
network between the RNC and the NodeB.
Instance
Node B
ZWF25-05-004
HSUPA Flow Control
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-1908
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter can be set to "Supported" for a NodeB when the
following conditions are met:

1: The NodeB supports the E-DCH congestion control function.
2: The parameters UIubLink.timeDelay and UIubLink.timeDelayJitter
are configured to appropriate values that match the transport delay
and the transport delay jitter between the SRNC and the NodeB.
If the parameter is set to "Supported" for the NodeB, the PS service
rate over E-DCH will be controlled when uplink congestion occurs in
the transport network between the SRNC and the NodeB.
This function can be enabled when the uplink packet loss ratio is
high in the transport network between the RNC and the NodeB.
The default is set to "Not Supported" because the E-DCH congestion
Reason
control function is not stable in most Node Bs.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.7 Transport Time Delay

Full Name
Transport Time Delay
Abbreviated Name
timeDelay
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
The transport network delay between the RNC and the related
NodeB influences the quality of service, such as the downlink
throughput.
This parameter indicates the transport network delay between the
RNC and the related NodeB.
2-1909
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
Node B
ZWF21-03-002
ZWF22-01-005
ZWF22-01-006
ZWF22-01-004

Transport CAC
Overbooking on Iub/Iur
Iu/Iub interface via satellite
Handover Control FG
RNC Transmission Overview FG
Iu/Iub interface via satellite FG
OMCR: 20ms, 100ms, 400ms; RNC: 0..2
Unit
ms
Default Value
20ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is configured in accordance with the maximum
transport network delay between the RNC and the related NodeB.
If the value is too large, some transport network faults may be
detected much later and the quality of service will decline.
If the value is too small, some transport network faults may be
detected much earlier and the quality of service will decline.
If the transport network delay is improperly configured for the NodeB
and DRNS, a wrong soft/hard handover decision may be made and
the quality of service will decline.
The default is applicable in most scenarios.
Reason
Change Take Effect
Yes
2-1910
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
The Related common transport channel will be reconfiged.
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.8 Transport Time Delay Jitter

Full Name
Transport Time Delay Jitter
Abbreviated Name
timeDelayJitter
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
The transport network delay jitter between the RNC and the related
NodeB influences the quality of service over DL DCH/FACH/PCH,
influences the E-DCH transport congestion detect and influences
the quality of Iur service.
This parameter indicates the transport delay jitter between the RNC
and the related NodeB.
Instance
Node B
ZWF21-03-005
ZWF22-01-005
ZWF22-01-006
ZWF22-01-004

Transport CAC
NodeB Management FG
RNC Transmission Overview FG
Unit
ms
2-1911
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
5ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
transport network jitter between the RNC and the related NodeB.
If the value is too small, the probability that downlink
DCH/FACH/PCH data is successfully sent on the Uu interface
will be decreased, and the quality of service on the downlink
DCH/FACH/PCH will decline. On the other hand, some transport
network faults may be detected much earlier and the quality of
service will decline.
If the value is too large, downlink DCH/FACH/PCH data frames will
be stored in the NodeB for a long time, and the delay of service will
be increased. On the other hand, some transport network faults may
be detected much later and the quality of service will decline.
Reason
Change Take Effect
Yes
How to Impact
The Related common transport channel will be reconfiged.
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.9 Co-NodeB HS-PDSCH Code Sharing Update Period

Full Name
Co-NodeB HS-PDSCH Code Sharing Update Period
2-1912
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
hsSharUptPrd
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the period to update the HS-PDSCH code

number to share for each one of the cells of the same Node B.
Instance
Node B
ZWF23-04-021
(5..65535)s, step 5s
Unit
Default Value
20s
Related Parameters
HsSharMethod
Valid only when HsSharMethod is set to "RNC Control"
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the period to update the
HS-PDSCH code number to share for each one of the cells of the
same Node B.
Configuration Rule: The parameter should be set to guarantee that
the HS-PDSCH number adjustment can track the HSDPA throughput
violation of different cells, but should not set too small which may
lead to adjust the HS-PDSCH number over frequently. The smaller
this parameter is, the more frequently the max HS-PDSCH numbers
of different cells are changed.
N/A
Reason
Change Take Effect
No
2-1913
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.10 Adjustment Type for DL Power Balance

Full Name
Adjustment Type for DL Power Balance
Abbreviated Name
adjType
Managed Object
Iub Link(UIubLink)
3GPP Name
Power Adjustment Type
3GPP Reference
TS 25.423;
TS 25.433
Description
This parameter indicates the balancing type of the DL power. None

indicates there is no need to balance the DL power. Common
indicates to balance the DL power and the balanced radio links use
the same power.
Instance
Node B
ZWF21-04-008
Power Control FG
0: None
1: Common
Unit
N/A
Default Value
Common
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-1914
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: This parameter indicates the balancing type of
the DL power.
Related factors: The value of this parameter is based on the need
and purpose of power balancing.
This parameter indicates the balancing type of the DL power. None
indicates there is no need to balance the DL power. Common
indicates to balance the DL power and the balanced radio links
using the same power.
The power balancing type (common) can resolve the power drifting
Reason
problem when the UE is in macro diversity status.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.11 NodeB Resource Audit Timer

Full Name
NodeB Resource Audit Timer
Abbreviated Name
auditTimer
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates an audit timer of the NodeB resource. The

RNC audits the NodeB resource periodically based on the value of
this timer.
Instance
Node B
ZWF21-20-002
2-1915
SJ-20141209142030-013|2015-11-12 (R1.3)
Node B Management FG
200..65535, step 1; Unit: 100ms
Unit
100ms
Default Value
300, unit: 100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the audit timer of
Node B resource, periodically auditing the NodeB resource.

Related factors: timer interval that the NodeB sends the audit
response.
Configuration rule: if the parameter value is high, the RNC cannot
obtain the NodeB resource in time.
If the parameter value is low, the NodeB and RNC consume more
system resources.
The default value is set based on the timer interval that the NodeB
Reason
sends the audit responses and the system cost.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.12 Diversity Control Field

2-1916
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Diversity Control Field
Abbreviated Name
divContrlField
Managed Object
Iub Link(UIubLink)
3GPP Name
3GPP Reference
TS 25.433
Description
When there is already an existing radio link and another radio link
needs to be established, this parameter indicates whether this radio
link is combined with the existing one at a Node B. If they are
combined, the radio link uses the Iub interface resources of the
existing radio link and does not establish a new FP connection.
Instance
Node B
ZWF21-01-002
0: May
1: Must
2: Must not
Unit
N/A
Default Value
May
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicator of the combination of softer handover
Related factors: softer handover combination gain in macro diversity

mode
There are two methods of softer handover combination. One is
the combination of signals at the NodeB receiver, which gives the
maximum gain. The other is the combination at the RNC, which
gives a relatively smaller gain than the first method.
If the parameter is set to "May", the NodeB determines whether
to perform the softer handover combination with the maximum
proportional gain based on its own physical conditions.
2-1917
SJ-20141209142030-013|2015-11-12 (R1.3)
If the parameter is set to "Must", it is mandatory that the NodeB

performs the softer handover combination with the maximum
proportional gain that is usually used in tests.
If the parameter is set to "Must not", the NodeB is not allowed
to perform the softer handover combination with the maximum
proportional gain.
Adjustment suggestion: It is not suggested to adjust this parameter.
The default parameter value is set based on the softer handover
Reason
combination gain in macro diversity mode.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.13 Time Delay of Deleting Cell When NodeB is Unreachable

Full Name
Time Delay of Deleting Cell When NodeB is Unreachable
Abbreviated Name
tWaitNBReach
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
Specifies the time delay of deleting cell resource when Node B is

unreachable.
Start: RNC detects the link of transport layer between RNC and
NodeB is disconnected.
Stop: RNC detects the link of transport layer between RNC and
NodeB is restored.
At expiry: RNC will delete cell resources about the NodeB which link
of transport layer is disconnected.
2-1918
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
NodeB
ZWF21-01-002
NodeB Management FG
100..65535, step 1; Unit: 100ms
Unit
100ms
Default Value
600
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
setting according transport quality
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.14 ATM Link Broken Protection Time Length

Full Name
ATM Link Broken Protection Time Length
Abbreviated Name
tAtmRelLinkPro
Managed Object
Iub Link(UIubLink)
2-1919
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates timer length of delay process when ATM

link broken.
Start: When NBNM received AAL link broken indication, the timer
is started.
Expiration: If NCP link broken, NBNM notified NBLOMM that NCP
is unavailable; If CCP link broken, NBNM notified NBLOMM that
CCP is available
Stop: When NBNM received AAL establish confirm indication, the
timer is killed.
Instance
RNC
ZWF21-20-002
1..500, step 1; Unit: 100ms
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
The bigger the parameter is, the better the UTRAN can avoid the
cell out of service for NCP break when ATM transport .
according to the transport delay jitter from a RNC to a related NodeB
Reason
that ATM/IP is usually be used.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1920
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Link
N/A
N/A
2.56.15 IP Link Broken Protection Time Length

Full Name
IP Link Broken Protection Time Length
Abbreviated Name
tIpRelLinkPro
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates timer length of delay process when IP

link broken.
Start: When NBNM received association link broken indication, the
timer is started.
Expiration: If NCP link broken, NBNM notified NBLOMM that NCP
is unavailable; If CCP link broken, NBNM notified NBLOMM that
CCP is available
Stop: When NBNM received association link establish confirm
indication, the timer is killed.
Instance
RNC
ZWF21-01-002
1..500, step 1; Unit: 100ms
Unit
100ms
Default Value
100
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-1921
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
The bigger the parameter is, the better the UTRAN can avoid the
cell out of service for NCP break when IP transport .
according to the transport delay jitter from a RNC to a related NodeB
Reason
that ATM/IP is usually be used.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.16 Share Mode of CE Resource for Multi-Operators

Full Name
Share Mode of CE Resource for Multi-Operators
Abbreviated Name
ceShareMode
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the shared mode of CE resources for

multiple operators. If this parameter is set to "0", a minimal CE
percentage should be guaranteed for the operators no matter
whether CE resources are congested or not, which can ensure that
a minimal CE percentage for an operator cannot be used by other
operators at any time. If this parameter is set to "1", a minimal
CE percentage should be guaranteed for the operator only when
CE resources are congested, which can ensure that a minimal
CE percentage can be used by each operator in the case of CE
congestion and the CE utilization rate can be improved when CE
resources are not congested.
Instance
Node B
2-1922
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-30-121
Operator Specific CE Resource
RAN Sharing FG
0: Minimal CE Percentage should be guaranteed for operators

whether CE Resource is congested or not
1: Minimal CE Percentage should be guaranteed for operators only
when CE Resource is congested
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: shared mode of CE resources for multiple
operators. If this parameter is set to "0", a minimal CE percentage

should be guaranteed for the operators no matter whether CE
resources are congested or not, which can ensure that a minimal CE
percentage for an operator cannot be used by other operators at any
time. If this parameter is set to "1", a minimal CE percentage should
be guaranteed for the operators when CE resources are congested.
Related factors: requirements of the operator.
If this parameter is set to "0", a minimal CE percentage should
be guaranteed for the operators no matter whether CE resources
are congested, which can ensure that a minimal CE percentage
for an operator cannot be used by other operators at any time.
If this parameter is set to "1", a minimal CE percentage should
be guaranteed for the operators only when CE resources are
congested, which can ensure that a minimal CE percentage can
be used by each operator in the case of CE congestion and the
CE utilization rate can be improved when CE resources are not
congested.
Adjustment suggestion: This parameter is set based on
N/A
Reason
Change Take Effect
New Connection
2-1923
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.17 CE Share Switch for Carrier Sharing

Full Name
CE Share Switch for Carrier Sharing
Abbreviated Name
ceShareSwitch
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CE shared switch for carrier sharing. If

this parameter is set to "1: On", every PLMN can reserve minimal
CE percentage in the CE shared scenario for carrier sharing. If this
parameter is set to "0: Off", every PLMN cannot reserve any CE in
the CE shared scenario for carrier sharing, and the CE will be used
based on the First-Arrive-First-Get rule.
Instance
Node B
ZWF21-30-121
RAN Sharing FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
2-1924
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: CE shared switch for carrier sharing. If this
parameter is set to "1: On", every PLMN can reserve minimal CE

percentage in the CE shared scenario for carrier sharing.
Related factors: requirements of the operator.
If this parameter is set to "1: On", every PLMN can reserve minimal
CE percentage in the CE shared scenario for carrier sharing. If this
parameter is set to "0: Off", every PLMN cannot reserve any CE in
the CE shared scenario for carrier sharing. The CE will be used
based on the First-Arrive-First-Get rule.
Adjustment suggestion: This parameter is set based on
The function is turned off by default because it is not used in most
Reason
networks.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.18 NodeB support DPI-SPI change indication

Full Name
NodeB support DPI-SPI change indication
Abbreviated Name
sptDpiSpiChgInd
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
2-1925
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the switch for the DPI-SPI change function.
If it is set to "1", a NodeB supports ZTE-defined SPI change
procedure in the DPI function. If it is set to "0", a NodeB does not
support ZTE-defined SPI change procedure.
Instance
NE Office
ZWF27-01-100
0: Not support DPI-SPI change

1: Support DPI-SPI change
Unit
N/A
Default Value
0: not support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: switch for the DPI-SPI change function.
Related factor: capability of a NodeB. If the NodeB supports the

ZTE-defined DPI-SPI change, this parameter is set to "1"; otherwise,
it is set to "0".
The default value is set to ensure maximum compatibility.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2-1926
SJ-20141209142030-013|2015-11-12 (R1.3)
2.56.19 Associated NodeB

Full Name
Associated NodeB
Abbreviated Name
iubLinkNodeBFunction
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Node B associated with the object.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1927
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Link
N/A
N/A
2.56.20 Associated UtranCell List

Full Name
Associated UtranCell List
Abbreviated Name
iubLinkUtranCell
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the UtranCell list associated with the

object.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-1928
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.21 BandWidth of Iub Interface

Full Name
BandWidth of Iub Interface
Abbreviated Name
Bandwidth
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the bandwidth of the Iub interface.
Instance
RNC
N/A
N/A
N/A
0..65535
Unit
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1929
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.22 CE High Load Threshold

Full Name
CE High Load Threshold
Abbreviated Name
ceHighLdThr
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CE High Load Threshold. If the CE

load is less than or equal to this threshold, CE CAC based on Cell
Group is not performed. If the CE load is greater than this threshold,
CE CAC based on Cell Group is performed.
Instance
NodeB
ZWF21-04-001
ZWF25-04-001
Admission Control
(0..100)%, step 0.1%
Unit
%
2-1930
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
60
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the CE high load
threshold. If the CE load is less than or equal to this threshold, CE

CAC based on Cell Group is not performed; else, CE CAC based on
Cell Group is performed.
Related factors: RNC CPU load and probability of RL Failure due to
NodeB Cell Group CE Limited.
If this parameter is to a greater value, the probability of RL Failure
due to NodeB Cell Group CE Limited is higher. This affects the
radio performance KPI of the network. If this parameter is set to a
smaller value, unnecessary CAC may be performed for the cell,
which wastes system CPU resources.
The default value is set based on the RNC CPU load and probability
Reason
of RL Failure due to NodeB Cell Group CE Limited.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.23 Cell Group CE CAC Check Switch

Full Name
Cell Group CE CAC Check Switch
Abbreviated Name
celGrpCeChkSwch
2-1931
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Cell Group CE CAC Check Switch. If

this parameter is set to "0: Off", Cell Group CE CAC Check is not
performed. If this parameter is set to "1: On", Cell Group CE CAC
Check is performed.
Instance
Node B
ZWF21-04-001
ZWF25-04-001
Admission Control
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the cell group CE
CAC check switch. If this parameter is set to "0: Off", Cell Group CE
CAC Check is not performed. If this parameter is set to "1: On", Cell
Group CE CAC Check is performed.
Related factor: accuracy of Cell Group CE CAC in RNC.
The more accurate of Cell Group CE CAC in RNC, the less
probability of RL Failure caused by NodeB Cell Group CE Limited,
and the higher CE use rate.
It is a function switch and the function is disabled by default.
Reason
Change Take Effect
New Connection
No
2-1932
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.24 Backup Flag

Full Name
Backup Flag
Abbreviated Name
backupflag
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the backup flag of the object.
Instance
RNC
N/A
N/A
N/A
0..2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-1933
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path

Link
N/A
N/A
2.56.25 Backup RNC ID

Full Name
Backup RNC ID
Abbreviated Name
backuprncId
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the RNCID of the backup RNC if there is a

backup RNC. The value 65535 indicates that this attribute is invalid.
Instance
External UTRAN Cell
ZWF21-30-206
RNC Pool for Node Redundancy
RNC Pool for Node Redundancy FG
0..65535
Unit
N/A
Default Value
65535
Related Parameters
N/A
2-1934
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: sets the backup cell of the Adjacent RNC Cell if
the RNC Backup function is needed.

Related factor: the corresponding backup cell if the RNC Backup
function is needed.
Initially, the RNC POOL function is not started.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path

Link
N/A
N/A
2.56.26 The Times of No Audit Response

Full Name
The Times of No Audit Response
Abbreviated Name
noAuditRespTimes
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of no audit response times

after which the RNC will delete and re-establish the cells of the
NodeB.
Instance
Node B
2-1935
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-20-002
Node Management FG
1..65535
Unit
N/A
Default Value
65535
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: number of no audit response times
Related factor: reliable Node B detection

If the parameter is large, the capability to detect abnormal situations
is strong, the possibility of out of service is small, but the duration
inconsistency state is long.
If the parameter is small, the capability to detect abnormal situations
is weak, the possibility of out of service is large, but the duration
inconsistency state is short.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2-1936
SJ-20141209142030-013|2015-11-12 (R1.3)
2.56.27 UE Number Threshold Used for Switching Off Pico/Micro

NodeB Intelligently
Full Name
UE Number Threshold Used for Switching Off Pico/Micro NodeB

Intelligently
Abbreviated Name
pmUeNumThreshClose
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the UE number threshold used for

switching off Pico/Micro Node B intelligently. Pico/Micro Node Bs
can be switched off only when the number of UEs is smaller than
the threshold.
Instance
Node B
N/A
N/A
(1..100), step 1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the UE number
threshold used for switching off Pico/Micro Node B intelligently.

Related factor:
If the parameter value is too small, it is difficult to meet the
requirement for switching off the Pico/Micro cell, thus affecting
power saving.
If the parameter value is too large, it is easy to meet the requirement
for switching off the Pico/Micro cell, and the Pico/Micro cell's users
experience will be influenced.
2-1937
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on the power-saving requirement
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.28 UL Node B Throughput Threshold Used for Switching Off

Pico/Micro NodeB Intelligently
Full Name
UL Node B Throughput Threshold Used for Switching Off Pico/Micro

NodeB Intelligently
Abbreviated Name
pmUlThptThreshClose
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the UL Node B throughput threshold used

for switching off Pico/Micro Node B intelligently. Pico/Micro Node
Bs can be switched off only when the uplink throughput is lower
than the threshold.
Instance
Node B
N/A
N/A
Unit
kbps
Default Value
258
2-1938
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: UL Node B throughput threshold used for
switching off Pico/Micro Node B intelligently.

Related factor:
power saving.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.29 DL Node B Throughput Threshold Used for Switching Off

Pico/Micro NodeB Intelligently
Full Name
DL Node B Throughput Threshold Used for Switching Off Pico/Micro

NodeB Intelligently
Abbreviated Name
pmDlThptThreshClose
Managed Object
Iub Link(UIubLink)
2-1939
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DL Node B throughput threshold used

for switching off Pico/Micro Node B intelligently. Pico/Micro Node
Bs can be switched off only when the downlink throughput is lower
than the threshold.
Instance
Node B
N/A
N/A
Unit
kbps
Default Value
300
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: DL Node B throughput threshold used for
switching off Pico/Micro Node B intelligently.

Related factor:
power saving.
Reason
Change Take Effect
No
How to Impact
N/A
2-1940
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.30 E-DCH Time Based Schedule Switch

Full Name
E-DCH Time Based Schedule Switch
Abbreviated Name
edchTdmSwch
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the E-DCH schedule based on time

division multiplex function.
If this function is enabled, the RNC controls the uplink transmission
time indirectly by controlling the distribution range of DPCH/F-DPCH
timing in the downlink direction (DL-UL timing offset = 1024 chips).
This can reduce the uplink interferences among E-DCH users,
which causes the throughput to increase in the uplink direction.
Instance
Node B
ZWF25-01-035
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-1941
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: This parameter indicates the E-DCH schedule
based on time division multiplex function.

Related factors: throughput of the E-DCH and downlink DPCH pilot
peak-to-average power ratio.
If this function is enabled, the RNC controls the uplink transmission
time indirectly by controlling the distribution range of DPCH/F-DPCH
timing in the downlink direction (DL-UL timing offset = 1024 chips).
This can reduce the uplink interferences among E-DCH users,
which causes the throughput in the uplink direction to increase.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.31 OIC Function Switch

Full Name
OIC Function Switch
Abbreviated Name
oICSwitch
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
2-1942
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the Overhead Interference

Cancellation (OIC) feature is enabled.
If the parameter is set to 1, the OIC feature is enabled for the Node
B.
If the parameter is set to 0, the OIC feature is disabled for the Node
B.
Instance
RNC
N/A
N/A
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: OIC switch.
Related factor: whether the OIC feature needs to be enabled.

If the parameter is set to 1, the OIC feature is enabled for the
Node B. The non-serving radio link of an HSDPA user can use
the specified information about the serving radio link for overhead
interference cancellation.
If the parameter is set to 0, the OIC feature is disabled for the Node
B.
This parameter can be set to 1 if the OIC feature is required.
Reason
Otherwise, this parameter shall be set to 0.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-1943
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Link
V4.13.10.15/V3.13.10.15
ADD
2.56.32 NodeB No.

Full Name
NodeB No.
Abbreviated Name
nodeBNo
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the NodeB No. of the cell.
Instance
NodeB
ZWF21-20-002
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Main function: This parameter indicates the Node B number, which
is valid in RNC.
Influence factor: the value should set by the network
Planning&Optimization.
N/A
Reason
2-1944
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

Link
N/A
N/A
2.56.33 Adjacent Net Element Identifier

Full Name
Adjacent Net Element Identifier
Abbreviated Name
AneId
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of an adjacent network element.
Instance
RNC
N/A
N/A
Basic Id Parameter
1..2047
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-1945
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: This parameter indicates an adjacent network
element ID. Configuration rule: This parameter must be configured

depending on the network deployment.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

Link
N/A
N/A
2.56.34 Adjacent NE Version

Full Name
Adjacent NE Version
Abbreviated Name
Version
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates adjacent NE version information.
Instance
NE Office
N/A
N/A
Basic Parameter
0: New Version(3.09)
1: Old Version 1(300)
2: Old Version 2(310)
255: Other Version
2-1946
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
0: New Version(3.09)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: network planning parameter, Iub interface
parameter.
Related factor: version of the NodeBs.
The default value is set to "0" (New Version) to adapt to most of
Reason
the interfacing application cases.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.35 Transport BandWidth Release Switch based on Overload

Full Name
Transport BandWidth Release Switch based on Overload
Abbreviated Name
BandRelSwitch
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
2-1947
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Transport BandWidthRelease Switch

based on Overload for Iub interface
Instance
NE Office
ZWF21-04-010
Congestion Control
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the Transport
BandWidthRelease Switch based on Overload for Iub interface

Related factor: The parameter should be set according to the actual
configuration of the transport resource.
The parameter should be set according to the actual configuration
Reason
of the transport resource.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2-1948
SJ-20141209142030-013|2015-11-12 (R1.3)
2.56.36 The protocol version that network element uses

Full Name
The protocol version that network element uses
Abbreviated Name
ProVer
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the protocol version used by the network

element connected to the Iub interface.
Instance
RNC
N/A
N/A
Basic Id Parameter
10: R98
20: R99
30: R4
40: R5
50: R6
60: R7
70: R8
80: R9
Unit
N/A
Default Value
80: R9
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Unused parameter.
N/A
Reason
Change Take Effect
2-1949
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Link
N/A
N/A
2.56.37 Measurement Report Trigger Criteria for Pico Cell

Full Name
Measurement Report Trigger Criteria for Pico Cell
Abbreviated Name
picoMeaRptCriteria
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the way in which the RNC triggers a Pico
cell to report measurement information, that is, periodical triggering
or fixed time triggering.
Instance
CELL
N/A
N/A
Small Cell Package
1: fixed time triggering
Unit
NA
Default Value
0Periodical triggering
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Don't Care
2-1950
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the mode in which
the RNC triggers a Pico cell to perform measurement and report

measurement data. The mode can be periodical triggering or
fixed-time triggering in idle hours.
Configuration rule: The configuration is determined in network
planning.
The default value is set to "0: Periodical triggering", which helps
Reason
obtain information about neighboring cells in time and optimize

PSCs and neighboring cells.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path

Link
add
2.56.38 Intra Measurement Interval for Pico Cell

Full Name
Intra Measurement Interval for Pico Cell
Abbreviated Name
picoIntraRptPrd
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the intra-frequency measurement interval

Instance
CELL
N/A
N/A
2-1951
SJ-20141209142030-013|2015-11-12 (R1.3)
Small Cell Package
(0.5..96) hours, step: 0.5 hour
Unit
hour
Default Value
8hour
Related Parameters
PicoMeaRptCriteria
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the intra-frequency

is used.
Configuration rule: The configuration must ensure both the accuracy
of the SON algorithm and user experience (the measurement may
cause calls to drop). To ensure the algorithm accuracy, the interval
must be as short as possible. To ensure user experience, the
interval must be as long as possible.
Reason
Change Take Effect
Yes
How to Impact
measurement needs to close RF, this may causes call drop when
Access
read/write
OMC Access path

Link
add
2.56.39 Inter Measurement Interval for Pico Cell

Full Name
Inter Measurement Interval for Pico Cell
2-1952
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
picoInterRptPrd
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the inter-frequency measurement interval

Instance
CELL
N/A
N/A
(0.5..96) hours, step: 0.5 hour
Unit
hour
Default Value
4hour
Related Parameters
PicoMeaRptCriteria
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the inter-frequency

is used.
of the SON algorithm and user experience (the measurement may
cause calls to drop). To ensure the algorithm accuracy, the interval
must be as short as possible. To ensure user experience, the
interval must be as long as possible.
Reason
Change Take Effect
Yes
How to Impact
2-1953
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path

Link
add
2.56.40 GSM Measurement Interval for Pico Cell

Full Name
GSM Measurement Interval for Pico Cell
Abbreviated Name
picoGsmRptPrd
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the GSM measurement interval (in hours)

when periodical triggering mode is used.
Instance
CELL
N/A
N/A
(0.5..96) hours, step: 0.5hour
Unit
hour
Default Value
4hour
Related Parameters
PicoMeaRptCriteria
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-1954
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the GSM
measurement interval (in hours) when periodically triggering mode

is used.
of the SON algorithm and the pico performance. To ensure the
algorithm accuracy, the interval must be as short as possible.
To ensure the pico performance, the interval must be as long as
possible.
Reason
and the performance of pico cells.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path

Link
add
2.56.41 The First Fixed Time Point to Trigger Measurement for

Pico Cell
Full Name
The First Fixed Time Point to Trigger Measurement for Pico Cell
Abbreviated Name
initialTimePoint1
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the first fixed time point to

trigger an intra-frequency, inter-frequency, and inter-rat
3, indicating the time array with three elements of hour, minute,
and second.
2-1955
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
CELL
N/A
N/A
Hour: the first element[0], value range [0, 59]

Minute: the second element[1], value range [0, 59]
Second: the third element[2], value range [0, 59]
Unit
hour:min:sec
Default Value
[1 0 0] (namely 1: 0: 0)
Related Parameters
1,PicoMeaRptCriteria
2,InitTimePointNum
1. This parameter is valid only when the PicoMeaRptCriteria
Parameters
parameter is set to "1: fixed time triggering".

2. The InitTimePointNum parameter determines the validity of the
(1) When InitTimePointNum is set to "1", only InitialTimePoint1 is
(2) When InitTimePointNum is set to "2", only InitialTimePoint1 and
(3) When InitTimePointNum is set to "3", InitialTimePoint1,
3. The first array element (hour) ranges from 0 to 23. If the element
is set to a value greater than 23, a message appears, indicating
that the value is invalid.
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the first fixed time
point when the intra-frequency, inter-frequency, or inter-RAT

measurement is triggered if the mode of fixed-time triggering in idle
hours is used.
Configuration rule: It is determined in network planning. Generally,
the number of online users is the smallest at 1 AM.
Reason
time, for example, 1 a.m.).
Change Take Effect
Yes
0
2-1956
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
Access
read/write
OMC Access path

Link
adduse these three parameters InitialTimePoint1

InitialTimePoint2InitialTimePoint3 to replace those three
parameters InitialTimeHourInitialTimeMinInitialTimeSec in
V4.13.10.01
2.56.42 The Second Fixed Time Point to Trigger Measurement for

Pico Cell
Full Name
The Second Fixed Time Point to Trigger Measurement for Pico Cell
Abbreviated Name
initialTimePoint2
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the second fixed time point to

and second.
Instance
CELL
N/A
N/A

Unit
hour:min:sec
Default Value
[11 0 0] (namely 11: 0: 0)
2-1957
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
2,InitTimePointNum
Parameters

Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the second fixed
time point when the intra-frequency, inter-frequency, or inter-RAT

hours is used.
the number of online users is smaller at 11 AM.
Reason
time, for example, 11 p.m.).
Change Take Effect
Yes
How to Impact
Access
read/write
OMC Access path

Link
2-1958
SJ-20141209142030-013|2015-11-12 (R1.3)

V4.13.10.01
2.56.43 The third Fixed Time Point to Trigger Measurement for

Pico Cell
Full Name
The third Fixed Time Point to Trigger Measurement for Pico Cell
Abbreviated Name
initialTimePoint3
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the third fixed time point to

and second.
Instance
CELL
N/A
N/A

Unit
hour:min:sec
Default Value
[16 0 0]namely 16: 0: 0)
Related Parameters
2,InitTimePointNum
2-1959
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the third fixed
time point when the intra-frequency, inter-frequency, or inter-RAT

hours is used.
the number of online users is smaller at 4 PM.
Reason
time, for example, 16 p.m.).
Change Take Effect
Yes
How to Impact
Access
read/write
OMC Access path

Link

V4.13.10.01
2-1960
SJ-20141209142030-013|2015-11-12 (R1.3)
2.56.44 Num of Initial Time Points for Pico Cell

Full Name
Num of Initial Time Points for Pico Cell
Abbreviated Name
initTimePointNum
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of time points at which

measurement is triggered when fixed time triggering mode is used.
Instance
CELL
N/A
N/A
1DBS_RR_MAX_NUM_POINT_INITIALTIME_PICOMEAS
Unit
NA
Default Value
Related Parameters
PicoMeaRptCriteria
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
points at which measurement is triggered when the mode of

fixed-time triggering in idle hours is used.
Configure rule: It is determined in network planning.
The default value is set based on network planning (at the lowest
Reason
traffic time by default).
Change Take Effect
No
How to Impact
N/A
2-1961
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
read/write
OMC Access path

Link
add
2.56.45 Pico Minimum User Number Threshold for Triggering

Periodic Measurement
Full Name
Pico Minimum User Number Threshold for Triggering Periodic

Measurement
Abbreviated Name
picoMinUsrNumThrd
Managed Object
Iub Link(UIubLink)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the minimum number of UEs in a pico

NodeB. In periodic triggering mode, the RNC does not trigger
periodic measurement until the number of UEs in all cells of a pico
NodeB is less than the value of this parameter.
Instance
CELL
N/A
N/A
Small Cell Package
0..255
Unit
NA
Default Value
Related Parameters
PicoMeaRptCriteria
Parameters
Data Type
BYTE
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-1962
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: In periodic triggering mode, when the number
of users of all cells of a Pico is smaller than the parameter value, the
periodic measurement is triggered.
Configuration rule: The configuration must ensure the accuracy of
the SON algorithm, and cannot affect too many online users. The
larger the threshold is, the more accurate the SON algorithm is, and
the measurement is triggered earlier. The smaller the threshold is,
the fewer online users are affected and the fewer calls are dropped.
Reason
and the impact on users.
Change Take Effect
Yes
How to Impact
bigger threshold more call drop
Access
read/write
OMC Access path

Link
Add
2.57 Logical Iub Link(ULogicalIubLink)

2.57.1 Minimal percent of CE can be used by the PLMN
Full Name
Minimal percent of CE can be used by the PLMN
Abbreviated Name
minCEPercent
Managed Object
Logical Iub Link(ULogicalIubLink)

3GPP Name
N/A
3GPP Reference
N/A
2-1963
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the minimum percentage of CE that can be

used by the PLMN for RAN Sharing while carrier sharing. When the
CeShareSwitch parameter is set to "1" and CEShareMode to "0", the
minimum percentage of CE can only be used by the corresponding
operator (PLMN) and cannot be occupied by other operators at
any time. When the CeShareSwitch parameter is set to "1" and
CEShareMode to "1", the parameter is invalid if CE resources
are not congested. In the case of CE congestion, the minimum
percentage of CE can only be used by the operator (PLMN) and
cannot be occupied by other operators. When the CeShareSwitch
parameter is set to "0", the parameter is invalid.
Instance
Node B
ZWF21-30-121
RAN Sharing FG
(0..100)%, step 0.1%
Unit
Default Value
N/A
Related Parameters
CeShareSwitch
CEShareMode
If CeShareSwitch is "0", this parameter is invalid. Otherwise, the
Parameters
sum of the parameter values in the same NodeB should be equal

to or less than 100%. When CeShareSwitch is set to "1" and
CEShareMode to "0", the minimum percentage of CE can only be
used by the operator (PLMN) and cannot be occupied by other
operators at any time. When CeShareSwitch is set to "1" and
CEShareMode to "1", this parameter is invalid if CE resources
percentage of CE can only be used by the operator (PLMN).
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1964
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: minimum percentage of CE used by a PLMN
for RAN sharing while carrier sharing. When CeShareSwitch is set

to "1" and CEShareMode to "0", the minimum percentage of CE
can only be used by the operator (PLMN) and cannot be occupied
by other operators at any time. When CeShareSwitch is set to "1"
and CEShareMode to "1", this parameter is invalid if CE resources
percentage of CE can only be used by the operator (PLMN). When
CeShareSwitch is set to "0", this parameter is invalid.
Related factors: minimum percentage of CE used by a PLMN, and
Effect: This parameter indicates the minimum percentage of CE
used by a PLMN for RAN sharing while carrier sharing. The larger
the parameter is, the more the CE resources that can be used by
the PLMN are. The smaller the parameter is, the fewer the CE
resources that can be used by the PLMN are.
Adjustment suggestion: This parameter should be set based on the
requirements of each operator.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Local ManagedElement Plmn Information->Logical Iub Link
N/A
N/A
2.57.2 Used Transport Bearer Type Profile Related to Basic Priority

Full Name
Used Transport Bearer Type Profile Related to Basic Priority
Abbreviated Name
refUTbTypeProfile
Managed Object

2-1965
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the referenced UTbTypeProfile object

when the NE office obtains transport QoS according to the
ARP/THP/TC. It is valid only when UpQosMapType of the UIubLink
object is set to 1.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Configure this parameter according to the transport type and QoS
mapping type on the Iub interface. This parameter is valid only when
UpQosMap of the UIubLink object is set to 1.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-1966
SJ-20141209142030-013|2015-11-12 (R1.3)
2.57.3 Used Dedicated Service Transport Bearer Qos Profile

Full Name
Used Dedicated Service Transport Bearer Qos Profile
Abbreviated Name
refUDedSrvTbProfile
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the transport layer QoS profile parameter

mapping index for each adjacent Iub NE.
Instance
RNC
ZWF22-01-005
Transport CAC
Transport CAC FG
enum: 0..255
Unit
N/A
Default Value
Set as 0 if the parameter is invalid, otherwise set default value for

various transmission scenarios: IP: 1 ATM+IP: 3 ATM: 4
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
When it is required to directly map the transmission layer QoS
parameter from the upper layer service type, this parameter should
be configured.
N/A
Reason
Change Take Effect
New Connection
No
2-1967
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.58 UTRAN Registration Area(UUtranRegArea)

2.58.1 UTRAN Registration Area Object ID
Full Name
UTRAN Registration Area Object ID
Abbreviated Name
UUtranRegAreaId
Managed Object
UTRAN Registration Area(UUtranRegArea)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UTRAN Registration

Area configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-1968
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Location Information Configuration->UTRAN Registration Area
N/A
N/A
2.58.2 URA Identity

Full Name
URA Identity
Abbreviated Name
ura
Managed Object
UTRAN Registration Area(UUtranRegArea)

3GPP Name
URA-ID; URA ID; URA Identity
3GPP Reference
TS 25.423;
TS 25.331;
TS 25.401
Description
UTRAN registration area ID. One cell can belong to at most four
URAs (MAX_URA=4). Different UE that resides in this cell can
belong to different URA.
Instance
UTRAN Cell
ZWF21-20-003
Cell Management
Location Service FG
0..65535
Unit
N/A
2-1969
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
N/A
Related Parameters
URANum of R6SrvCel, URA[4] of R6SrvCel
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
The parameter is must be Network planned.One cell can belong to
at most four URAs (MAX_URA=4)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Location Information Configuration->UTRAN Registration Area
N/A
N/A
2.59 Traffic Volume Measurement

Profile(UTrvMeasProfile)
2.59.1 Traffic Volume Measurement Profile Object ID
Full Name
Traffic Volume Measurement Profile Object ID
Abbreviated Name
UTrvMeasProfileId
Managed Object
Traffic Volume Measurement Profile(UTrvMeasProfile)

3GPP Name
N/A
2-1970
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the object ID of the traffic volume

measurement profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Measurement Configuration->Traffic

Volume Measurement Profile
N/A
N/A
2-1971
SJ-20141209142030-013|2015-11-12 (R1.3)
2.59.2 Profile Id
Full Name
Profile Id
Abbreviated Name
profileId
Managed Object
Traffic Volume Measurement Profile(UTrvMeasProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates traffic volume measurement profile identity
Instance
RNC
ZWF21-04-004
ZWF25-01-033
ZWF21-04-014

Adaptive HSUPA TTI

0..9
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets a MO identity.
Ensure that it is unique under its parent object.
The profile ID.
Reason
Change Take Effect
Unmodifiable
No
0
2-1972
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path

Volume Measurement Profile
N/A
N/A
2.60 UE Traffic Volume Period Measurement

Configuration for RACH(URachPrdUeTrv)
2.60.1 UE Traffic Volume Period Measurement Configuration Object
ID for RACH
Full Name
UE Traffic Volume Period Measurement Configuration Object ID

for RACH
Abbreviated Name
URachPrdUeTrvId
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UE traffic volume

period measurement configuration for RACH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-1973
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Volume Measurement Profile->UE Traffic Volume Period
Measurement Configuration for RACH
N/A
N/A
2.60.2 Measurement Report Transfer Mode

Full Name
Measurement Report Transfer Mode
Abbreviated Name
measRptTrMod
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
3GPP Reference
TS 25.331
2-1974
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the RLC mode that is used by the traffic
volume measurement report. If the AM mode is used, when RNC
receives the SDU with wrong SDU labels (not continuous), it
can ask the UE to transmit the SDU again. If the UM mode is
used, the retransmission is not needed. In general, the important
measurements must use the AM mode to report the measurement
result. Otherwise, only the UM mode is available (reduce the data
traffic for the measurement report and improve the system capacity).
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: Acknowledged Mode RLC

1: Unacknowledged Mode RLC
Unit
N/A
Default Value
Acknowledged Mode RLC
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the measurement report transfer mode.
Related factor: success rate of measurement report.

The recommended configuration is Acknowledged Mode RLC, in
which retransmission is supported.
The default value takes the reported measurement report success
Reason
rate into consideration.
Change Take Effect
Ongoing Connection(at Next measurement control)
No
How to Impact
N/A
2-1975
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A
2.60.3 Measurement Quantity

Full Name
Measurement Quantity
Abbreviated Name
measQuantity
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
Measurement quantity
3GPP Reference
TS 25.331
Description
This parameter indicates the measurement object of the traffic

volume measurement that UE performs.For the definitions of RLC
buffer payload, Average RLC buffer payload, and Variance of RLC
buffer payload, please refer to the 3GPP TS25.321 protocol.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


1: RLC buffer payload,

2: Average RLC buffer payload
3: Variance of RLC buffer payload
Unit
N/A
Default Value
RLC buffer payload
Related Parameters
N/A
N/A
Parameters
2-1976
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the measurement quantity of traffic
volume measurement.
The recommended configuration on the UE side is RLC buffer
payload, so that the data volume changes can be promptly
responded.
The recommended configuration on the RNC user plane is average
RLC buffer payload, so that the traffic volume measurement is more
correct and the usage of resources is more reasonable.
Variance of RLC buffer payload is currently not supported.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.60.4 Time Interval for Taking an Average or a Variance

Full Name
Time Interval for Taking an Average or a Variance
Abbreviated Name
averageTime
Managed Object

RACH(URachPrdUeTrv)
2-1977
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
Time Interval to take an average or a variance
3GPP Reference
TS 25.331
Description
This parameter indicates the average time window for the

measurement, which is only valid when the measurement quantity is
Average RLC buffer payload or Variance of RLC buffer payload.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
20ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the time interval for taking an average.

If this parameter is set to a greater value, the data appears
smoother. This filters out large data fluctuations. However, if this
time interval is too long, the response to the users data request will
be slow, and the user experience will be affected.
If this parameter is set to a smaller value, it is faster to respond to
the users data request. However, this may cause unnecessary
adjustment and affect the resource usage.
Reason
user experience.
Change Take Effect
No
2-1978
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.60.5 RLC Buffer Payload for Each RB

Full Name
RLC Buffer Payload for Each RB
Abbreviated Name
rptRlcBufInd
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
RLC Buffer Payload for each RB
3GPP Reference
TS 25.331
Description
This parameter indicates whether RLC Buffer Payload is reported in

the traffic volume measurement.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-1979
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates whether to report the RLC buffer
payload in the traffic volume measurement.

The recommended configuration on the terminal is to report RLC
buffer payload, so that the RNC can determine the 4B0 event for the
traffic volume measurement on the UE side. When the UE reports a
4B event, and the RLC buffer payload is 0, the RNC considers the
event as an uplink 4B0 event.
The default value takes the judgment conditions of UE-side 4B0
Reason
events into consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.60.6 Average of RLC Buffer Payload for Each RB

Full Name
Average of RLC Buffer Payload for Each RB
Abbreviated Name
rptRlcAveInd
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
Average of RLC Buffer Payload for each RB
3GPP Reference
TS 25.331
Description
This parameter indicates whether the Average of RLC Buffer

Payload is reported in the traffic volume measurement.
2-1980
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates whether to report the average of RLC
buffer payload in the traffic volume measurement.

Related factor: air interface resources.
The average of RLC buffer payload in the traffic volume
measurement on the UE side is not recommended to be reported so
that the air interface resources can be saved.
measurement on the RNC user plane can be reported because it
does not use the air interface resources.
The default value takes the resource utilization rate into
Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-1981
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A
2.60.7 Variance of RLC Buffer Payload for Each RB

Full Name
Variance of RLC Buffer Payload for Each RB
Abbreviated Name
rptRlcVarInd
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
Variance of RLC Buffer Payload for each RB
3GPP Reference
TS 25.331
Description
This parameter indicates whether Variance of RLC Buffer Payload is

reported in the traffic volume measurement.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-1982
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: indicates whether to report the variance of RLC

The terminal is not recommended to report the variance of RLC
buffer payload, so that the air interface resources can be saved.
Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.60.8 Amount of Reporting in Period Report Criteria

Full Name
Amount of Reporting in Period Report Criteria
Abbreviated Name
prdRptAmount
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description
This parameter indicates the times for reporting periodic reports.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A
2-1983
SJ-20141209142030-013|2015-11-12 (R1.3)


1, 2, 4, 8, 16, 32, 64, Infinity
Unit
N/A
Default Value
Infinity
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of times that periodic reports
can be reported.
Related factors: air interface resources and user experience.
If this parameter is set to a greater value, there are a greater number
of periodic reports. In this case, more air interface resources will
be used.
If this parameter is set to a smaller value, there are a smaller
number of periodic reports. In this case, the system will make a
slower response to the UE's traffic volume request, and the user
experience will be affected.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-1984
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.60.9 Reporting Interval in Period Report Criteria

Full Name
Reporting Interval in Period Report Criteria
Abbreviated Name
prdRptInterval
Managed Object

RACH(URachPrdUeTrv)
3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description
This parameter indicates the UE reporting interval in periodic

reporting mode.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000,
20000, 24000, 28000, 32000, 64000)ms
Unit
ms
Default Value
8000ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1985
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the interval at which periodic reports are
reported.
If this parameter is set to a smaller value, the periodic reports will be
reported more frequently. In this case, more air interface resources
will be used.
If this parameter is set to a greater value, the periodic reports will
be reported less frequently. In this case, the system will make a
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.61 UP Traffic Volume Event Measurement

Configuration for FACH(UFachEvUpTrv)
2.61.1 UP Traffic Volume Event Measurement Configuration Object
ID for FACH
Full Name
UP Traffic Volume Event Measurement Configuration Object ID for

FACH
Abbreviated Name
UFachEvUpTrvId
Managed Object
UP Traffic Volume Event Measurement Configuration for

FACH(UFachEvUpTrv)
2-1986
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UP traffic volume event

measurement configuration for FACH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Volume Measurement Profile->UP Traffic Volume Event
Measurement Configuration for FACH
N/A
N/A
2-1987
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
measRptTrMod
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A



Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1988
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

volume measurement that RNC user plane performs.For the
definitions of RLC buffer payload, Average RLC buffer payload, and
Variance of RLC buffer payload, please refer to the 3GPP TS25.321
protocol.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A
2-1989
SJ-20141209142030-013|2015-11-12 (R1.3)



Unit
N/A
Default Value
Average RLC buffer payload
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

2-1990
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-1991
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
2-1992
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-004
ZWF23-01-A


0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-1993
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-1994
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
2-1995
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-004
ZWF23-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-1996
SJ-20141209142030-013|2015-11-12 (R1.3)
2.61.8 Event Number of UE Traffic Volume Measurement

Full Name
Event Number of UE Traffic Volume Measurement
Abbreviated Name
measEvtNum
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates event number of UE traffic volume

measurement in RNC user plane.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


1..MAX_UE_TRV_MEAS_EVENT
where MAX_UE_TRV_MEAS_EVENT=2
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of traffic volume measurement
events.
Related factors: 3GPP definition and measurement requirement.
The number of traffic volume measurement events is determined by
the type of the measurement event to be delivered.
When the DRBC function is enabled, both 4a and 4b events need to
be configured, so that the DRBC function operates more effectively.
2-1997
SJ-20141209142030-013|2015-11-12 (R1.3)
The default configuration can make DRBC operate more effectively.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.61.9 UE Traffic Volume Measurement Event Identity

Full Name
UE Traffic Volume Measurement Event Identity
Abbreviated Name
meaEvtId
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
Traffic volume event identity
3GPP Reference
TS 25.331
Description
This parameter indicates the event identity of the traffic volume

measurement performed by UE.
MAX_UE_TRV_MEAS_EVENT is the maximum number of UE
traffic volume measurement event, which equals to 2.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


2-1998
SJ-20141209142030-013|2015-11-12 (R1.3)
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_UE_TRV_MEAS_EVENT]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the measurement event identity.

The identity of a traffic volume measurement event is determined by
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.61.10 Traffic Volume Threshold of Event 4A/4B for FACH Channel

Full Name
Traffic Volume Threshold of Event 4A/4B for FACH Channel
Abbreviated Name
rptThres
2-1999
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description
This parameter indicates the reporting threshold of event 4A and

4B for traffic volume measurement on FACH channel. If the traffic
volume becomes larger than the threshold of event 4A, a report of
4A event will be triggered; and if the traffic volume becomes smaller
than the threshold of event 4B, a report of 4B event will be triggered.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[256, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2000
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the traffic volume threshold of event 4A/4B
for non-DCH channel.

If the threshold of 4A event is set to a smaller value, the system
makes a faster response to the users service request, and it
takes less time for the system to start increasing the bandwidth,
providing a better user experience. However, this may cause a
waste of resources due to unnecessary bandwidth increases. If this
parameter is set to a greater value, the system makes a slower
response to the users service request, and it takes more time for
the system to start increasing the bandwidth, providing a poorer
user experience.
If the threshold of 4B event is set to a greater value, the system
makes a faster response to the users service request, and it takes
less time for the system to start reducing the occupied bandwidth.
In this case, the user experience is likely to be affected due to
unnecessary bandwidth reductions. If this parameter is set to a
smaller value, the system makes a slower response to the users
service request, and it takes more time for the system to start
reducing the occupied bandwidth, causing a lower usage of radio
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2001
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
This parameter indicates the time difference between having

detected the event generation and reporting the event. Only when
the event generation is detected and still meets all requirements of
event triggering after Time to trigger, the event can be triggered
and reported. The larger which equals to, the stricter the judgment
is for the event to be triggered. The parameter should be set in
accordance with the actual requirements. Sometimes, if it is set too
large, the quality of calls may decrease.
Where MAX_UE_TRV_MEAS_EVENT is the maximum number
of UE traffic volume measurement event, which equals to 2. This
parameter indicates the time difference from the event being
detected to the event being reported. Only when the event is
detected and still meets all requirements of event triggering within
the triggering duration, the event can be triggered and reported.
The larger which equals to, the stricter the judgment is for the event
to be triggered. The parameter must be set in accordance with the
actual requirements. If it is too large, the quality of calls may be
influenced.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[80, 2560]ms
Related Parameters
N/A
2-2002
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the trigger time of 4A/4B event.

If the trigger time of 4A event is set to a smaller value, the system
user experience.
If the trigger time of 4B event is set to a smaller value, the system
greater value, the system makes a slower response to the users
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2003
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.61.12 Pending Time After Trigger

Full Name
Pending Time After Trigger
Abbreviated Name
pendingTime
Managed Object

FACH(UFachEvUpTrv)
3GPP Name
Pending time after trigger
3GPP Reference
TS 25.331
Description
This parameter indicates the pending time after trigger. This timer is
started in the UE when a measurement report has been triggered by
a given event. The UE is then forbidden to send new measurement
reports triggered by the same event during this time period, instead
the UE waits until the timer expires. MAX_UE_TRV_MEAS_EVENT
is the maximum number of UE traffic measurement event, which
equals to 2.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[4000, 1000] ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2004
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the pending time of 4A and 4B events.

If the pending time of 4A event is set to a smaller value, the system
user experience.
If the pending time of 4B event is set to a smaller value, the system
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2005
SJ-20141209142030-013|2015-11-12 (R1.3)
2.62 UE Traffic Volume Event Measurement

Configuration for DCH(UDchEvUeTrv)
2.62.1 UE Traffic Volume Event Measurement Configuration Object
ID for DCH
Full Name
UE Traffic Volume Event Measurement Configuration Object ID for

DCH
Abbreviated Name
UDchEvUeTrvId
Managed Object
UE Traffic Volume Event Measurement Configuration for

DCH(UDchEvUeTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UE traffic volume event

measurement configuration for DCH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2006
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

Volume Measurement Profile->UE Traffic Volume Event
Measurement Configuration for DCH
N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


2-2007
SJ-20141209142030-013|2015-11-12 (R1.3)

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
2-2008
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A



Unit
N/A
Default Value
RLC buffer payload
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
2-2009
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(20, 40, .., 260)ms, step 20ms
2-2010
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name

2-2011
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
rptRlcBufInd
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
2-2012
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
2-2013
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

DCH(UDchEvUeTrv)
2-2014
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2015
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2016
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

2-2017
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2018
SJ-20141209142030-013|2015-11-12 (R1.3)
2.62.10 Traffic Volume Threshold of Event 4A/4B for DCH (8kbps)

Full Name
Traffic Volume Threshold of Event 4A/4B for DCH (8kbps)
Abbreviated Name
rptThres0
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

4B for traffic volume measurement on DCH whose rate is 8 kbps.
If the traffic volume becomes larger than the threshold of event
4A, a report of 4A event will be triggered; and if the traffic volume
becomes smaller than the threshold of event 4B, a report of 4B
event will be triggered.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[64, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2019
SJ-20141209142030-013|2015-11-12 (R1.3)
for DCH channel (rate: 8 kbps).

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2020
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres1
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

4B for traffic volume measurement on DCH whose rate is 16 kbps
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[128, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2021
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2022
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres2
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[256, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2023
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2024
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres3
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[512, 32] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2025
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2026
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres4
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description
This parameter indicates the reporting threshold of event 4A and 4B

for traffic volume measurement on DCH whose rate is 128 kbps.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[1k, 32] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2027
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2028
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres5
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[2k, 64] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2029
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2030
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres6
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[8k, 128] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2031
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2032
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
This parameter indicates the time difference from the event being
influenced.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[320, 2560]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2033
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
2-2034
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
pendingTime
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the pending time after triggered. This

timer is started in the UE when a measurement report has been
triggered by a given event. The UE is then forbidden to send
new measurement reports triggered by the same event during
this time period, instead the UE waits until the timer expires.
traffic measurement event, which equals to 2.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2035
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.62.19 Traffic Volume Threshold of Event 4A/4B for DCH (CS+PS

Scene)
2-2036
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Traffic Volume Threshold of Event 4A/4B for DCH (CS+PS Scene)
Abbreviated Name
rptThresCsPs
Managed Object

DCH(UDchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description
This parameter indicates the reporting threshold of events 4A and

4B for traffic volume measurement on DCH in the concurrent CS
and PS service scenario with the low PS service rate. If the traffic
volume is greater than the threshold of event 4A, a report of event
4A is triggered. If the traffic volume is less than the threshold of
event 4B, a report of event 4B is triggered.
traffic volume measurement events, with the value of 2.
Instance
UTRAN Cell
ZWF21-05-026
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
Bytes
Default Value
[2k, 64] Bytes
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2037
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: reporting threshold of events 4A and 4B for
traffic volume measurement on DCH in the concurrent CS and PS

service scenario with the low PS service rate.
If the traffic volume is greater than the threshold of event 4A, a
report of event 4A is triggered. If the traffic volume is less than the
threshold of event 4B, a report of event 4B is triggered.
Related factors: user experience and resource utilization
A smaller value for event 4A indicates a faster response to user's
service requests, less time for the system to start increasing
bandwidth, and better user experience. However, resources may
be wasted due to unnecessary bandwidth increases. A greater
value indicates a slower response to user's service requests, more
time for the system to start increasing bandwidth, and worse user
experience.
A greater value for event 4B indicates a faster response to user's
service requests and less time for the system to start decreasing
bandwidth. However, the user experience may be worse due to
unnecessary bandwidth decreases. A smaller value indicates a
slower response to user's service requests, more time for the system
to start decreasing bandwidth, and lower resource utilization.
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path

Add
2-2038
SJ-20141209142030-013|2015-11-12 (R1.3)
2.63 UP Traffic Volume Event Measurement

Configuration for DCH(UDchEvUpTrv)
2.63.1 UP Traffic Volume Event Measurement Configuration Object
ID for DCH
Full Name
UP Traffic Volume Event Measurement Configuration Object ID for

DCH
Abbreviated Name
UDchEvUpTrvId
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration for DCH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2039
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


2-2040
SJ-20141209142030-013|2015-11-12 (R1.3)

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
2-2041
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

protocol.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A



Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
2-2042
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


2-2043
SJ-20141209142030-013|2015-11-12 (R1.3)
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2044
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
2-2045
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
2-2046
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

DCH(UDchEvUpTrv)
2-2047
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2048
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2049
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

2-2050
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2051
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
rptThres0
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[128, 16] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2052
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2053
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres1
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

4B for traffic volume measurement on DCH whose rate is 16 kbps
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[128, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2054
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2055
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres2
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[256, 16] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2056
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2057
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres3
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[1024, 16] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2058
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2059
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres4
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[2k, 64] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2060
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2061
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres5
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[2k, 256] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2062
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2063
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
rptThres6
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[8k, 128] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2064
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2065
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
influenced.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[320, 2560]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2066
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
2-2067
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
pendingTime
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
equals to 2.
Instance
UTRAN Cell
ZWF21-04-004
ZWF23-01-A


(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2068
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.63.19 Traffic Volume Threshold of Event 4A/4B for DCH (CS+PS

Scene)
2-2069
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Traffic Volume Threshold of Event 4A/4B for DCH (CS+PS Scene)
Abbreviated Name
rptThresCsPs
Managed Object

DCH(UDchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description
This parameter indicates the reporting threshold of events 4A and

4B for traffic volume measurement on DCH in the concurrent CS
and PS service scenario with the low PS service rate. If the traffic
volume is greater than the threshold of event 4A, a report of event
4A is triggered. If the traffic volume is less than the threshold of
event 4B, a report of event 4B is triggered.
traffic volume measurement events, with the value of 2.
Instance
UTRAN Cell
ZWF21-05-026
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
Bytes
Default Value
[2k, 256] Bytes
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2070
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: reporting threshold of events 4A and 4B for
traffic volume measurement on DCH in the concurrent CS and PS

service scenario with the low PS service rate.
If the traffic volume is greater than the threshold of event 4A, a
report of event 4A is triggered. If the traffic volume is less than the
threshold of event 4B, a report of event 4B is triggered.
Related factors: user experience and resource utilization
A smaller value for event 4A indicates a faster response to user's
service requests, less time for the system to start increasing
bandwidth, and better user experience. However, resources may
be wasted due to unnecessary bandwidth increases. A greater
value indicates a slower response to user's service requests, more
time for the system to start increasing bandwidth, and worse user
experience.
A greater value for event 4B indicates a faster response to user's
service requests and less time for the system to start decreasing
bandwidth. However, the user experience may be worse due to
unnecessary bandwidth decreases. A smaller value indicates a
slower response to user's service requests, more time for the system
to start decreasing bandwidth, and lower resource utilization.
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path

Add
2-2071
SJ-20141209142030-013|2015-11-12 (R1.3)
2.64 UE Traffic Volume Period Measurement

Configuration for DCH(UDchPrdUeTrv)
2.64.1 UE Traffic Volume Period Measurement Configuration Object
ID for DCH
Full Name
UE Traffic Volume Period Measurement Configuration Object ID

for DCH
Abbreviated Name
UDchPrdUeTrvId
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UE traffic volume

period measurement configuration for DCH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2072
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


2-2073
SJ-20141209142030-013|2015-11-12 (R1.3)

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
2-2074
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A



Unit
N/A
Default Value
RLC buffer payload
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
2-2075
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(20, 40, .., 260)ms, step 20ms
2-2076
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
ms
Default Value
20ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name

2-2077
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
rptRlcBufInd
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
2-2078
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
2-2079
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

does not use any air interface resources.
Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

DCH(UDchPrdUeTrv)
2-2080
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2081
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptAmount
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description
This parameter indicates the times for reporting periodic reports.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


1, 2, 4, 8, 16, 32, 64, Infinity
Unit
N/A
Default Value
Infinity
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2082
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the number of times that periodic reports
can be reported.
If this parameter is set to a greater value, there are a greater number
of periodic reports. In this case, more air interface resources will
be used.
If this parameter is set to a smaller value, there are a smaller
number of periodic reports. In this case, the system will make a
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptInterval
Managed Object

DCH(UDchPrdUeTrv)
3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description
This parameter indicates the UE reporting interval in periodic

reporting mode.
2-2083
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-A


(250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000,
20000, 24000, 28000, 32000, 64000)ms
Unit
ms
Default Value
4000ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the interval at which periodic reports are
reported.
If this parameter is set to a smaller value, the periodic reports will be
reported more frequently. In this case, more air interface resources
will be used.
If this parameter is set to a greater value, the periodic reports will
be reported less frequently. In this case, the system will make a
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2084
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A
2.65 UP Traffic Volume Measurement

Configuration Number for Streaming Class
on HS-DSCH(UDedSHsdschEvUpTrv)
2.65.1 UP Traffic Volume Measurement Configuration Number for
Streaming Class on HS-DSCH Object ID
Full Name
UP Traffic Volume Measurement Configuration Number for

Streaming Class on HS-DSCH Object ID
Abbreviated Name
UDedSHsdschEvUpTrvId
Managed Object

Streaming Class on HS-DSCH(UDedSHsdschEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UP traffic volume

measurement configuration for streaming services on HS-DSCH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
2-2085
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Volume Measurement Profile->UP Traffic Volume Measurement
Configuration Number for Streaming Class on HS-DSCH
N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2086
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
Instance
UTRAN Cell
ZWF23-01-A

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2087
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

protocol.
Instance
UTRAN Cell
ZWF23-01-A

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-2088
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2089
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
UTRAN Cell
ZWF23-01-A
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2090
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2091
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A

2-2092
SJ-20141209142030-013|2015-11-12 (R1.3)
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2093
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
0
2-2094
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement.
Instance
UTRAN Cell
ZWF23-01-A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-2095
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2096
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
UTRAN Cell
ZWF23-01-A
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2097
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.65.10 Traffic Volume Threshold of Event 4A/4B for Streaming

Class on HS-DSCH Channel
Full Name
Traffic Volume Threshold of Event 4A/4B for Streaming Class on

HS-DSCH Channel
Abbreviated Name
rptThres
Managed Object

3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

for traffic volume measurement for Streaming Class on HS-DSCH
Channel. If the traffic volume becomes larger than the threshold of
event 4A, a report of 4A event will be triggered; and if the traffic
volume becomes smaller than the threshold of event 4B, a report of
4B event will be triggered.
Instance
UTRAN Cell
ZWF23-01-A
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[12K, 256] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-2098
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2099
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
influenced.
Instance
UTRAN Cell
ZWF23-01-A
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[2560, 2560]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2100
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
2-2101
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
pendingTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
equals to 2.
Instance
UTRAN Cell
ZWF23-01-A
(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
2-2102
SJ-20141209142030-013|2015-11-12 (R1.3)

resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.66 UP Traffic Volume Measurement Configuration

for Interactive and Background Class on
HS-DSCH(UDedIBHsdschEvUpTrv)
2.66.1 UP Traffic Volume Measurement Configuration for Interactive
and Background Class on HS-DSCH Object ID
Full Name
UP Traffic Volume Measurement Configuration for Interactive and

Background Class on HS-DSCH Object ID
Abbreviated Name
UDedIBHsdschEvUpTrvId
Managed Object

Background Class on HS-DSCH(UDedIBHsdschEvUpTrv)
2-2103
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration for interactive and background services
on HS-DSCH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration for Interactive and Background Class on HS-DSCH
N/A
2-2104
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF23-01-A

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2105
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
2-2106
SJ-20141209142030-013|2015-11-12 (R1.3)

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2107
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
averageTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
user experience.
2-2108
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
2-2109
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

3GPP Name

2-2110
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2111
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2112
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement.
Instance
UTRAN Cell
ZWF23-01-A
2-2113
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name

2-2114
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF23-01-A
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
2-2115
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.66.10
Traffic Volume Threshold of Event 4A/4B for Interactive and
Background Class on HS-DSCH Channel
Full Name
Traffic Volume Threshold of Event 4A/4B for Interactive and

Background Class on HS-DSCH Channel
Abbreviated Name
rptThres
Managed Object

3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

4B for traffic volume measurement for Interactive and Background
Class on HS-DSCH Channel. If the traffic volume becomes larger
than the threshold of event 4A, a report of 4A event will be triggered;
and if the traffic volume becomes smaller than the threshold of event
4B, a report of 4B event will be triggered.
Instance
UTRAN Cell
ZWF23-01-A
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
2-2116
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
bytes
Default Value
[6K, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2117
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
influenced.
Instance
UTRAN Cell
ZWF23-01-A
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[2560, 2560]ms
Related Parameters
N/A
2-2118
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2119
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
pendingTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
equals to 2.
Instance
UTRAN Cell
ZWF23-01-A
(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2120
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2121
SJ-20141209142030-013|2015-11-12 (R1.3)
2.67 UP Traffic Volume Measurement Configuration for

HS-DSCH in CELL_FACH(UComHsdschEvUpTrv)
2.67.1 UP Traffic Volume Measurement Configuration for HS-DSCH
in CELL_FACH Object ID
Full Name

CELL_FACH Object ID
Abbreviated Name
UComHsdschEvUpTrvId
Managed Object

CELL_FACH(UComHsdschEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration for HS-DSCH in CELL_FACH state.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2122
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration for HS-DSCH in CELL_FACH
N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF26-01-011
Enhanced DL CELL_FACH
Enhanced DL CELL_FACH FG

Unit
N/A
2-2123
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

3GPP Name
2-2124
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

protocol.
Instance
UTRAN Cell
ZWF26-01-011

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
Reason
user experience.
Change Take Effect
No
0
2-2125
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-01-011
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2126
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

2-2127
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF26-01-011
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2128
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-01-011
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
2-2129
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-01-011
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
2-2130
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2131
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement.
Instance
UTRAN Cell
ZWF26-01-011
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2132
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-01-011
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

2-2133
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.67.10 Traffic Volume Threshold of Event 4A/4B for HS-DSCH

Channel in CELL_FACH
Full Name
Traffic Volume Threshold of Event 4A/4B for HS-DSCH Channel

in CELL_FACH
Abbreviated Name
rptThres
Managed Object

3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

4B for traffic volume measurement on HS-DSCH Channel in
CELL_FACH. If the traffic volume becomes larger than the threshold
of event 4A, a report of 4A event will be triggered; and if the traffic
volume becomes smaller than the threshold of event 4B, a report of
4B event will be triggered.
Instance
UTRAN Cell
ZWF26-01-011
2-2134
SJ-20141209142030-013|2015-11-12 (R1.3)
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[2k, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
2-2135
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
influenced.
Instance
UTRAN Cell
ZWF26-01-011
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
2-2136
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
ms
Default Value
[2560, 2560]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2137
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
pendingTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
equals to 2.
Instance
UTRAN Cell
ZWF26-01-011
(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
2-2138
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2139
SJ-20141209142030-013|2015-11-12 (R1.3)
2.68 UP Throughput Event Measurement Configuration

for E-TTI Switching(UETTIEdchEvUpTrv)
2.68.1 UP Throughput Event Measurement Configuration for E-TTI
Switching Object ID
Full Name

Switching Object ID
Abbreviated Name
UETTIEdchEvUpTrvId
Managed Object

Switching(UETTIEdchEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UP throughput event

measurement configuration for E-TTI switching.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2140
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

Volume Measurement Profile->UP Throughput Event Measurement
Configuration for E-TTI Switching
N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI

Unit
N/A
2-2141
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

3GPP Name
2-2142
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

protocol.
Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
Reason
user experience.
Change Take Effect
No
0
2-2143
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
260ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2144
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

2-2145
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2146
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
2-2147
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
2-2148
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2149
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement.
Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2150
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

2-2151
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.68.10 Throughput Measurement Threshold for E-TTI Switching of

Event 4A/4B for E-DCH Channel
Full Name
Throughput Measurement Threshold for E-TTI Switching of Event

4A/4B for E-DCH Channel
Abbreviated Name
thoughThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

for throughput measurement on E-DCH. If the throughput becomes
larger than the threshold of event 4A, a report of 4A event will be
triggered; and if the throughput becomes smaller than the threshold
of event 4B, a report of 4B event will be triggered.
Where MAX_UE_TRV_MEAS_EVENT is the maximum number of
UE throughput measurement event, which equals to 2.
Instance
RNC
ZWF25-01-033
Adaptive HSUPA TTI

2-2152
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
kbps
Default Value
[1500 700] kbps
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the threshold of 4A/4B event for the
throughput measurement of E-DCH.

user experience.
resources.
Reason
user experience.
Change Take Effect
Ongoing Connection(at next measurement control)
No
How to Impact
N/A
2-2153
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
influenced.
Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[1280, 1280]ms
Related Parameters
N/A
2-2154
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2155
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
pendingTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
equals to 2.
Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI
(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2156
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2157
SJ-20141209142030-013|2015-11-12 (R1.3)

E-DCH (UDedEdchEvUpTrv)
2.69.1 UP Traffic Volume Measurement Configuration Object ID
for E-DCH
Full Name
UP Traffic Volume Measurement Configuration Object ID for E-DCH
Abbreviated Name
UDedEdchEvUpTrvId
Managed Object
UP Traffic Volume Measurement Configuration for E-DCH

(UDedEdchEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration for E-DCH.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2158
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration for E-DCH
N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF25-01-A

Unit
N/A
2-2159
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
2-2160
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

protocol.
Instance
UTRAN Cell
ZWF25-01-A

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
Reason
user experience.
Change Take Effect
No
0
2-2161
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-A
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2162
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

2-2163
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF25-01-A
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2164
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-A
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
2-2165
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-A
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
2-2166
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
2-2167
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement.
Instance
UTRAN Cell
ZWF25-01-A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2168
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF25-01-A
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

2-2169
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.69.10 Traffic Volume Threshold of Event 4A/4B for E-DCH Channel

Full Name
Traffic Volume Threshold of Event 4A/4B for E-DCH Channel
Abbreviated Name
rptThres
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

for traffic volume measurement on E-DCH channel. If the traffic
volume becomes larger than the threshold of event 4A, a report of
4A event will be triggered; and if the traffic volume becomes smaller
than the threshold of event 4B, a report of 4B event will be triggered.
Instance
UTRAN Cell
ZWF25-01-A
2-2170
SJ-20141209142030-013|2015-11-12 (R1.3)
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[2k, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
2-2171
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
influenced.
Instance
UTRAN Cell
ZWF25-01-A
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[2560, 2560]ms
2-2172
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

2-2173
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
pendingTime
Managed Object

(UDedEdchEvUpTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
equals to 2.
Instance
UTRAN Cell
ZWF25-01-A
(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2174
SJ-20141209142030-013|2015-11-12 (R1.3)

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2175
SJ-20141209142030-013|2015-11-12 (R1.3)

E-DCH in CELL_FACH(UComEdchEvUpTrv)
2.70.1 UP Traffic Volume Measurement Configuration Object ID
for E-DCH
Full Name
UP Traffic Volume Measurement Configuration Object ID for E-DCH
Abbreviated Name
UComEdchEvUpTrvId
Managed Object

CELL_FACH(UComEdchEvUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration for E-DCH in CELL_FACH state.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2176
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration for E-DCH in CELL_FACH
N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
Instance
UTRAN Cell
ZWF26-02-003

Unit
N/A
2-2177
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

3GPP Name
2-2178
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

protocol.
Instance
UTRAN Cell
ZWF26-02-003

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
volume measurement.
responded.
Reason
user experience.
Change Take Effect
No
0
2-2179
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-02-003
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2180
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

2-2181
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF26-02-003
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2182
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-02-003
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
2-2183
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-02-003
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
2-2184
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

Reason
consideration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2185
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement.
Instance
UTRAN Cell
ZWF26-02-003
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
events.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2186
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF26-02-003
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

2-2187
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.70.10 Traffic Volume Threshold of Event 4A/4B for E-DCH

Channel in CELL_FACH
Full Name
Traffic Volume Threshold of Event 4A/4B for E-DCH Channel in

CELL_FACH
Abbreviated Name
rptThres
Managed Object

3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

for traffic volume measurement on E-DCH Channel in CELL_FACH.
UE traffic volume measurement event, which equals to 2.
Instance
UTRAN Cell
ZWF26-02-003
2-2188
SJ-20141209142030-013|2015-11-12 (R1.3)
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[2k, 8] bytes
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
2-2189
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
influenced.
Instance
UTRAN Cell
ZWF26-02-003
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
2-2190
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
ms
Default Value
[2560, 2560]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2191
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
pendingTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
equals to 2.
Instance
UTRAN Cell
ZWF26-02-003
(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
2-2192
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A

user experience.
resources.
Reason
user experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2193
SJ-20141209142030-013|2015-11-12 (R1.3)
2.71 E-DCH Throughput Measurement Configuration

for HS-DSCH/E-DCH to HS-DSCH/DCH
Switching(UEdchtoDchUpTrv)
2.71.1 E-DCH Throughput Measurement Configuration Object ID for
HS-DSCH/E-DCH to HS-DSCH/DCH Switching
Full Name
E-DCH Throughput Measurement Configuration Object ID for

Abbreviated Name
UEdchtoDchUpTrvId
Managed Object
E-DCH Throughput Measurement Configuration for

HS-DSCH/E-DCH to HS-DSCH/DCH Switching(UEdchtoDchUpTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the E-DCH throughput

measurement configuration for HS-DSCH/E-DCH to HS-DSCH/DCH
switching.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2194
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Volume Measurement Profile->E-DCH Throughput Measurement
Configuration for HS-DSCH/E-DCH to HS-DSCH/DCH Switching
N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the time interval for taking an average or

a variance, which is only valid when the measurement quantity is
"Average RLC buffer payload" or "Variance of RLC buffer payload".
Instance
UTRAN Cell
ZWF21-04-014
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
2-2195
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the time interval for
taking an average or a variance.

The larger the setting, the more smooth the data obtained. This
filters out large data fluctuations. However, if the time interval is too
large, the time to respond to users' data requests is longer, and
user experiences are affected.
The smaller the setting, the faster to respond to users' data requests.
However, this may cause unnecessary adjustment and affect the
resource utilization.
The default setting is based on the resource utilization and the user
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measEvtNum
2-2196
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of UE traffic volume

measurement events at the RNC's user plane.
Instance
UTRAN Cell
ZWF21-04-014
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the number of traffic
volume measurement events. No adjustment is required.
This parameter indicates the number of traffic volume measurement
Reason
events, and no adjustment is required.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

2-2197
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

measurement performed by the UE.
MAX_UE_TRV_MEAS_EVENT indicates the maximum number of
UE traffic volume measurement events, and it should be set to 2.
Instance
UTRAN Cell
ZWF21-04-014
(4a, 4b)
Unit
N/A
Default Value
[4a, 4b]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2198
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the measurement
event identity.
Related factors: 3GPP protocol and the measurement requirement.
The traffic volume event identity is determined by the type of the
measurement event to be delivered.
When the DRBC function is enabled, both events 4a and 4b need
to be configured, so that the DRBC function can operate more
effectively.
The default setting should ensure that the DRBC can operate more
Reason
effectively.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
pendingTime
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2199
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the pending time of an event if a report has

been triggered by the event. Within this time period, new reports
triggered by the same event are not sent.
The MAX_UE_TRV_MEAS_EVENT parameter indicates the
maximum number of UE traffic volume measurement events. The
value is 2.
Instance
UTRAN Cell
ZWF21-04-014
(250, 500, 1000, 2000, 4000, 8000, 16000) ms
Unit
ms
Default Value
[2000, 4000]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: pending time of event 4A or 4B.

If this parameter is set to a smaller value for event 4A, the system
responds to service requests of users faster and triggers bandwidth
increasing faster. This provides better user experience, but this
may waste resources due to unnecessary bandwidth increase. If
this parameter is set to a greater value for event 4A, the system
responds to service requests of users slower and triggers bandwidth
increasing slower. This provides poorer user experience.
If this parameter is set to a smaller value for event 4B, the system
reducing faster. This may affect the user experience due to
unnecessary bandwidth reduction. If this parameter is set to a
greater value for event 4B, the system responds to service requests
of users slower and triggers bandwidth reducing slower. This results
in low resource utilization.
Reason
experience.
Change Take Effect
2-2200
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
This parameter indicates the difference between the time when

the event occurrence is detected and the time when the event
is reported. Only when the events is detected and meets all the
triggering conditions within the triggering duration indicated by this
parameter, the event is triggered and reported.
If the Time to trigger parameter is set to a greater value, the
judgment conditions of the event is stricter. The parameter should
be set as required, because an excessively great value may
decrease the communication quality of users.
The MAX_UE_TRV_MEAS_EVENT parameter indicates the
maximum number of UE traffic volume measurement events. The
value is 2.
Instance
UTRAN Cell
ZWF21-04-014
2-2201
SJ-20141209142030-013|2015-11-12 (R1.3)
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000) ms
Unit
ms
Default Value
[2560, 2560]ms
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the triggering time of event 4A or 4B.

If this parameter is set to a smaller value for event 4A, the system
increasing faster. This provides better user experience, but this
may waste resources due to unnecessary bandwidth increase. If
this parameter is set to a greater value for event 4A, the system
responds to service requests of users slower and triggers bandwidth
increasing slower. This provides poorer user experience.
If this parameter is set to a smaller value for event 4B, the system
reducing faster. This may affect the user experience due to
unnecessary bandwidth reduction. If this parameter is set to a
greater value for event 4B, the system responds to service requests
of users slower and triggers bandwidth reducing slower. This results
in low resource utilization.
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2202
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A
2.71.7 E-DCH Throughput Measurement Threshold of Event 4A/4B

for HS-DSCH/E-DCH to HS-DSCH/DCH Switching
Full Name
E-DCH Throughput Measurement Threshold of Event 4A/4B for

Abbreviated Name
thoughThres
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the E-DCH channel throughput

measurement threshold of Event 4A/4B for switching from
HS-DSCH/E-DCH to HS-DSCH/DCH. If the throughput is larger
than the threshold of event 4A, a report of event 4A is triggered. If
the throughput is smaller than the threshold of event 4B, a report
of event 4B is triggered. The MAX_UE_TRV_MEAS_EVENT
parameter indicates the maximum number of UE throughput
measurement events. The value is 2.
Instance
RNC
ZWF21-04-014
Unit
kbps
Default Value
[128 16] kbps
Related Parameters
N/A
N/A
Parameters
2-2203
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates the E-DCH channel throughput
measurement threshold of Event 4A/4B for switching from

HS-DSCH/E-DCH to HS-DSCH/DCH.
If the threshold for event 4A is set to a smaller value, the system
responds to service requests of users faster, and provides better
user experience. However, this consumes more system resources.
If the threshold for event 4A is set to a greater value, the system
responds to service requests of users slower, and provides poorer
user experience. This consumes less system resources.
If the threshold for event 4B is set to a greater value, the system
responds to service requests of users faster. However, the user
experience may be affected due to fast bandwidth reduction. If the
threshold for event 4B is set to a smaller value, the system responds
to service requests of users slower. This results in lower resource
utilization.
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2204
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
measQuantity
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the measurement quantity of the traffic

volume measurement that the UE performs. For more information
about the RLC buffer payload, Average RLC buffer payload, and
Variance of RLC buffer payload, refer to the 3GPP TS25.321
protocol.
Instance
UTRAN Cell
ZWF21-04-014

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
quantity of the traffic volume measurement that the UE performs.

responded.
The recommended configuration on the RNC user plane is Average
2-2205
SJ-20141209142030-013|2015-11-12 (R1.3)
The default setting is based on the resource utilization and the user
Reason
experience.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the RLC mode used in reporting traffic

volume measurement reports. If AM mode is used, when the RNC
receives an SDU with a wrong SDU label (discontinuous), the RNC
can request the UE to retransmit the SDU. If UM mode is used, the
retransmission is not required. In general, important measurement
results are reported in AM mode, and other measurement results
and reported in UM mode (this can reduce the traffic volume caused
by measurement reports and increase the system capacity).
Instance
UTRAN Cell
ZWF21-04-014

2-2206
SJ-20141209142030-013|2015-11-12 (R1.3)

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
report transfer mode.

Related factors: success ratio of sending measurement reports.
The AM mode is recommended, meaning that retransmission is
supported.
The default setting is based on the success rate of reporting
Reason
measurement results.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcBufInd
2-2207
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates whether to report the RLC Buffer Payload

parameter in traffic volume measurement.
Instance
UTRAN Cell
ZWF21-04-014
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates whether to report the RLC Buffer
Payload parameter in traffic volume measurement.

The recommended configuration for a terminal is to report the RLC
buffer payload, so that the RNC can determine event 4B0 for traffic
volume measurement at the UE side. When a UE reports event 4B
and the RLC buffer payload is 0, the RNC considers that the event
is an uplink event 4B0.
The default value is set based on the judgment conditions of event
Reason
4B0 at the UE side.
Change Take Effect
No
How to Impact
N/A
2-2208
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcAveInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates whether to report the Average of RLC

Buffer Payload parameter in traffic volume measurement.
Instance
UTRAN Cell
ZWF21-04-014
0: False
1: True
Unit
N/A
Default Value
1: True
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2209
SJ-20141209142030-013|2015-11-12 (R1.3)

Related factor: air interface resources and the requirement of the
measurement.
The default value is set based on resource consumption.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
rptRlcVarInd
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates whether to report the Variance of RLC

2-2210
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-04-014
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates whether to report the Variance of RLC

For a terminal, reporting the Variance of RLC Buffer Payload
parameter is not recommended. This saves air interface resources.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2211
SJ-20141209142030-013|2015-11-12 (R1.3)
2.72 UE Traffic Volume Event Measurement

Configuration for PCH(UPchEvUeTrv)
2.72.1 UE Traffic Volume Event Measurement Configuration for
PCH Object ID
Full Name
UE Traffic Volume Event Measurement Configuration for PCH

Object ID
Abbreviated Name
UPchEvUeTrvId
Managed Object

PCH(UPchEvUeTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UE traffic volume event

measurement configuration for PCH.
Instance
RNC
N/A
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2212
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path

Measurement Configuration for PCH
N/A
N/A

Full Name
Abbreviated Name
averageTime
Managed Object

PCH(UPchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the time interval for taking an average or

a variance, which is only valid when the measurement quantity is
Instance
UTRAN Cell
ZWF21-04-004
(20, 40, .., 260)ms, step 20ms
Unit
ms
Default Value
100ms
Related Parameters
N/A
N/A
Parameters
2-2213
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: Time Interval for Taking an Average

The larger the value, then the more smoothly the data amount, and
it can filter out the larger fluctuations, but if the time is too long, the
response to user data amount demand is slow. The smaller the
value, the faster the response to user data amount demand, but it is
also easier to result in unnecessary adjustment, and it may influence
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

PCH(UPchEvUeTrv)
3GPP Name

2-2214
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-04-004
(4a, 4b)
Unit
N/A
Default Value
[4a]
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: Measurement event identity
Related factor: 3GPP definition and measurement demand.

This parameter is traffic volume Measurement event identity.The
configuration should be set according to measurement demand.
When DRBC is on, both the event 4a and 4b are generally
configured, in order to make the DRBC function more effective.
The default value can make the DRBC function more effective..
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

2-2215
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

PCH(UPchEvUeTrv)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement.
Instance
UTRAN Cell
ZWF21-04-004
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
This parameter is traffic measurement events quantity, and there is
no need to adjust.
This parameter is traffic measurement events quantity, and there is
Reason
no need to adjust.
Change Take Effect
2-2216
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measQuantity
Managed Object

PCH(UPchEvUeTrv)
3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the measurement quantity of the traffic

volume measurement that UE performs.
Instance
UTRAN Cell
ZWF21-04-004

Unit
N/A
Default Value
RLC buffer payload
Related Parameters
N/A
N/A
Parameters
2-2217
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: The measurement quantity of the traffic volume
measurement that RNC UP performs

payload, it can fast respond to the change of data amount
RLC buffer payload, it can make the traffic volume measurement
more correctly, and then the utilization of radio resources more
rationally.
Variance of RLC buffer payload is not supported now.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
measRptTrMod
Managed Object

PCH(UPchEvUeTrv)
2-2218
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the RLC mode of the traffic volume

measurement report. If the value is AM RLC, RNC can request
UE for retransmission after receiving the error SDU label (not
continuous). If the value is UM RLC, the retransmission is not
required. Usually, report the results of the important measurements
in AM mode and those less important in UM mode (to reduce the
traffic volume of the measurement report and increase the system
capacity).
Instance
UTRAN Cell
ZWF21-04-004

Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: Measurement Report Transfer Mode
Configuration Rule: It needs to consider the successful ratio of

measurement report.
The recommended configuration is Acknowledged Mode RLC , it
can retransmission.
Reason
successful ratio of measurement report.
Change Take Effect
No
2-2219
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.72.7
Full Name
Abbreviated Name
rptThres
Managed Object

PCH(UPchEvUeTrv)
3GPP Name
Reporting Threshold
3GPP Reference
TS 25.331
Description

4B for traffic volume measurement for Interactive and Background
Class on HS-DSCH Channel. If the traffic volume becomes larger
than the threshold of event 4A, a report of 4A event will be triggered;
and if the traffic volume becomes smaller than the threshold of event
4B, a report of 4B event will be triggered.
Instance
UTRAN Cell
ZWF21-04-004
(8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K,
24K, 32K, 48K , 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K)
bytes
Unit
bytes
Default Value
[256] bytes
2-2220
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Traffic Volume Threshold of Event 4A for PCH state.

utilization ratio of radio resources.
The smaller the threshold of event 4A is , the faster response that
system will make to user's demand , and the faster that system
will increase the bandwidth, and the better the user experience is,
but it also easier to result in a waste of radio resources because
of unnecessary bandwidth increase; The larger the threshold of
event 4A is , the slower response that system will make to user's
demand, and the slower that system will increase the bandwidth,
the worse the user experience is;
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2221
SJ-20141209142030-013|2015-11-12 (R1.3)
2.73 Intra-frequency Measurement

Profile(UIntraMeasProfile)
2.73.1 Intra-frequency Measurement Profile Object ID
Full Name
Intra-frequency Measurement Profile Object ID
Abbreviated Name
UIntraMeasProfileId
Managed Object
Intra-frequency Measurement Profile(UIntraMeasProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the intra-frequency

Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-2222
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Measurement Configuration->Intrafrequency Measurement Profile
N/A
N/A
2.73.2 Intra-frequency Measurement Profile Identity

Full Name
Intra-frequency Measurement Profile Identity
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the profile ID of a set of intra-frequency

measurement parameters. Each cell obtains the intra-frequency
measurement parameters in accordance with the profile ID.
Instance
UTRAN Cell
ZWF21-03-001
ZWF21-03-002
Handover Control FG
0..99
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-2223
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: profile ID of a set of intra-frequency
measurement parameters
Related factors: It should be unique under the parent object.
Reason
planning.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2.73.3 Mobility Configuration Scene

Full Name
Mobility Configuration Scene
Abbreviated Name
intialHoCelSelScene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates typical handovers and cell reselection

scenarios. For each scenario, the corresponding parameter can
be set to different values.
Instance
UTRAN Cell
ZWF21-03-001
ZWF21-03-002
2-2224
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
0: Outdoor Scene
1: High-Mobility Outdoor Scene
2: Indoor Scene
3: Subway/ tunnel Scene
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: scenario indicator for handovers/reselection
Related factor: actual networking requirements

0: outdoor scenario
1: expressway scenario
2: indoor scenario
3: subway/tunnel scenario
networking requirements.
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
N/A
N/A
2-2225
SJ-20141209142030-013|2015-11-12 (R1.3)
2.74 Intra-frequency Measurement Configuration

Related to Traffic Category(UIntraMeasSrvSpec)
2.74.1 Intra-frequency Measurement Configuration Related to
Traffic Category Object ID
Full Name

Category Object ID
Abbreviated Name
UIntraMeasSrvSpecId
Managed Object

Category(UIntraMeasSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration related to traffic categories.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2226
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Measurement Configuration->Intrafrequency Measurement Profile->Intra-frequency Measurement
Configuration Related to Traffic Category
N/A
N/A

Configuration
Full Name
Service and Bearer Type Used for Differentiating Handover

Configuration
Abbreviated Name
srvCategory
Managed Object

Category(UIntraMeasSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter distinguishes handover parameter configurations

based on services and bearer types. Handover-related parameter
configurations, for example, handover triggering threshold,
hysteresis, vary based on different service characteristics. Based
on the real-time feature, channel types and the number of RABs,
services are divided into nine types for different parameter
configurations. The value 0xff corresponds to the periodical
measurement or detected set measurement, which must be used
in all services.
Instance
ZWF21-03-001
Handover Control FG
2-2227
SJ-20141209142030-013|2015-11-12 (R1.3)
0: RT RAB Including Voice

1: RT RAB Excluding Voice
2: Single NRT on DL DCH/UL DCH
3: Single NRT RAB on DL HS-DSCH/UL DCH
4: Single NRT RAB on DL HS-DSCH/UL E-DCH
5: All Multi-NRT RAB on DL DCH/UL DCH
6: Multi-NRT RAB, HSPA is Involved and only DCHs are Used in UL
7: Multi-NRT RAB, HSPA is Involved and E-DCH is Used in UL
8: Multi Rab Including CS and PS
0xff: Not Related to Service Type
Unit
N/A
Default Value
CIntraDefault
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: services and bearer types used for
differentiating handover configurations during intra-frequency

measurement
Related factors: actual conditions for network planning and network
optimization
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path
Configuration Related to Traffic Category
N/A
N/A
2-2228
SJ-20141209142030-013|2015-11-12 (R1.3)
2.75 UE Intra-frequency Event Measurement

Configuration for CPICH Ec/No(UIntraEcNoEvMeas)
2.75.1 UE Intra-frequency Event Measurement Configuration for
CPICH Ec/No Object ID
Full Name

Ec/No Object ID
Abbreviated Name
UIntraEcNoEvMeasId
Managed Object

Ec/No(UIntraEcNoEvMeas)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of intra-frequency

measurement configuration of UE events for which the
measurement quantity is CPICH Ec/No.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
2-2229
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Configuration Related to Traffic Category->UE Intra-frequency
Event Measurement Configuration for CPICH Ec/No
N/A
N/A
2.75.2 Filter Coefficient

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description
This parameter indicates the filtering factor that UE performs the

L3 filtering on the measurement results of the intra-frequency
measurement.
UE executes intra-frequency measurement on L1 in the fixed
cycle (measure several points in one measurement cycle and
L1 filters the measurement results. This method can be decided
by UE freely). Then L1 reports to L3 at intervals and L3 filters
the latest measurement results and the measurement results
saved previously. The filtering shall be performed according to the
following formula described in 3GPP TS 25.331: "RRC Protocol
Specification": Fn= (1-a)*Fn-1+a*Mn , a = 1/2^ (k/2) .
Fn is the updated filtered measurement result
Fn-1 is the previous filtered measurement result
Mn is the latest received measurement result
2-2230
SJ-20141209142030-013|2015-11-12 (R1.3)
a = 1/2^ (k/2), where the value of k is the Filter Coefficient.

NOTE: if k is set to 0 that will mean no layer 3 filtering.
This formula indicates that the smaller the value of the filtering factor
is, the larger effect the current measurement result will have on
the measurement result reported to RNC (periodical report) or the
judgment (event report).
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
(0[0], 1[1], 2[2], 3[3], 4[4], 5[5], 6[6], 7[7], 8[8], 9[9], 11[10], 13[11],
15[12], 17[13], 19[14])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the filtering factor of the layer 3
measurement filtering.
Related factor: Set this parameter based on vendor experience,
which can ensure filtering effects and reflect measurement
timeliness.
If the parameter is set to a larger value, the measurement has
less influence on final intra-frequency measurement results. If the
parameter is set to a smaller value, the measurement has greater
influence on final intra-frequency measurement results.
It is not recommended to modify this parameter.
The default value is set based on the actual on-site conditions.
Reason
Change Take Effect
No
2-2231
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.75.3 Event Number of Intra-frequency Measurement

Full Name
Event Number of Intra-frequency Measurement
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates number of events required to be configured

for the set of the intra-frequency measurement parameters for a
certain purpose. The number of the events is related to the purpose
of the measurement and the judgment method of the soft handover.
The measurement parameter of the soft handover is related to the
number of the events in the soft handover algorithm.
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
1..MAX_INTRA_MEAS_EVENT
Where MAX_INTRA_MEAS_EVENT =7.
Unit
N/A
Default Value
Intra_Default
2-2232
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of events required to be
configured for a intra-frequency measurement ID.

Related factor: Set this parameter based on measurement usage.
Set this parameter based on the number of events used during
intra-frequency handover, which means based on the measurement
usage.
It is recommended not to modify this parameter.
The default value is set based on the measurement usage.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.75.4 Intra-frequency Event Identity

Full Name
Intra-frequency Event Identity
Abbreviated Name
meaEvtId
Managed Object

2-2233
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Intra-frequency event identity
3GPP Reference
TS 25.331
Description
This parameter indicates the event ID triggered by the

intra-frequency measurement.
MAX_INTRA_MEAS_EVENT indicates the maximum number of
intra-frequency measurement event, which is 7.
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
1a[0], 1b[1], 1c[2], 1d[3], 1e[4], 1f[5], 1j[6]
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_INTRA_MEAS_EVENT]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the measurement event ID.
Related factor: Set this parameter based on the definition of the

3GPP protocol.
This parameter indicates intra-frequency events defined in protocol.
One array bit corresponds to one event.
The default value is set based on the 3GPP definition.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2234
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.75.5 Reporting Range Constant for Event 1A/1B

Full Name
Reporting Range Constant for Event 1A/1B
Abbreviated Name
rptRange
Managed Object

3GPP Name
Reporting Range Constant
3GPP Reference
TS 25.331
Description
This parameter indicates the reporting range for event 1a/1b, used
to control the extent of difficulty in adding a cell into the active set or
dropping a cell from the active set. 1a is easier but 1b is harder to
trigger when this value increases; and vice versa.
intra-frequency measurement events, which is 7.
Instance
ZWF21-03-001
ZWF21-20-012
Handover Control FG
(0..14.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
2-2235
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
double[DBS_RR_MAX_INTRA_MEAS_EVENT]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets soft handover addition and deletion.
Related factor: Set this parameter based on the soft handover area
size, soft handover percentage, and soft handover success rate.
(1)1A event: If this parameter is set to a smaller value, it is
more difficulty to trigger this event, and thus the soft handover
area becomes smaller and calls are easier to be dropped. If this
parameter is set to a larger value, it is easier to trigger this event,
and thus the soft handover area becomes larger and soft handover
ratio increases. In this case, the consumption of system capacity
and soft handover success rate increase.
(2)1B event: If this parameter is set to a smaller value, it is easier to
trigger this event, and ping-pang handover is easier to occur. If this
parameter is set to a larger value, it is more difficulty to trigger this
event, and useless links in active set consume system resources
and capacity.
The default value is set based on the proper soft handover ratio, soft
Reason
handover success ratio, and the system capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.75.6 Weight for Event 1A/1B

2-2236
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Weight for Event 1A/1B
Abbreviated Name
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter is used for quality judgment of event 1a and 1b,

which indicates the weight of the best cell in the quality judgment
and is related to the measurement quantity and the event type.
Instance
ZWF21-03-001
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the weight for evaluating cell's quality.
Related factor: Set this parameter based on cell's quality and

handover success rate.
For 1A and 1B event, if this parameter is set to a smaller value, the
weight of the best cell is bigger during signaling quality evaluation.
The weight of other cells is smaller, and thus the handover success
rate increases.
If this parameter is set to a larger value, the weight of the best cell is
smaller during signaling quality evaluation. The weight of other cells
is bigger, which may cause an handover error.
2-2237
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on the handover success ratio.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.75.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description
This parameter indicates the hysteresis used when judging whether

to trigger the event. This parameter makes it different between the
status to trigger an event and the status to leave the event, so as to
avoid the trigger status change due to very small change.
The larger the value is, the larger the difference between the status
to trigger the event and the status to leave the event will be.
This parameter is related to the measurement quantity and the
event type.
Different events are configured separately and can be configured
with different hysteresis
2-2238
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-001
ZWF21-03-002
ZWF21-20-012
Handover Control FG
(0..7.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: delays the reporting of handover events,
decreases the average number of handover events, and avoids

mistaken handover.
Related factor: Set this parameter based on the average number
of handover events, the handover success rate, the UE moving
speed, and handover area size.
If this parameter is set to a larger value, an inter-frequency event is
unlikely to be triggered, the average number of times of handover
event decreases, and calls are more likely to be dropped.
If this parameter is set to a smaller value, an inter-frequency event
is likely to be triggered, the average number of handover events
increases, and the handover event may occur mistakenly.
Suggestion: For the scenario that the handover area is small or the
UE moves fast, this parameter should be set smaller, and vice versa.
The default value is set based on the handover success ratio and
Reason
normal rate scenario.
Change Take Effect
No
2-2239
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.75.8 Threshold of the Quality of the Used Frequency for Event

1E/1F
Full Name
Threshold of the Quality of the Used Frequency for Event 1E/1F
Abbreviated Name
threshUsedFreq
Managed Object

3GPP Name
Threshold used frequency
3GPP Reference
TS 25.331
Description
This parameter indicates the absolute threshold value used for

event 1e/1f.
If the pilot signaling quality is better than this threshold for a moment,
event 1e is triggered, DL DCH/UL DCH will be switched to DL
HS-DSCH/UL E-DCH or DL HS-DSCH/UL DCH.
If the pilot signaling quality is poorer than this threshold for a
moment, event 1f is triggered, DL HS-DSCH/UL E-DCH or DL
HS-DSCH/UL DCH will be switched to DL DCH/UL DCH.
Instance
ZWF23-04-004
CPICH Ec/No: (-24..0) dB, step 1dB
2-2240
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: delays the delivery of handover event, and
reduces the average number of handover events.

Related factor: Set this parameter based on average number of
times of handover and handover success ratio.
For 1E, the bigger this parameter is, the harder is to trigger this
event; otherwise, the smaller this parameter is, the easier is to
trigger this event.
For 1F, the bigger this parameter is, the easier is to trigger this
event; otherwise, the smaller this parameter is, the harder is to
trigger this event.
When event is easier to be triggered, average handover times and
handover success rate increase, but more system resources are
consumed.
The default value is set based on the average number of handover
Reason
events and handover success ratio.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2241
SJ-20141209142030-013|2015-11-12 (R1.3)
2.75.9 Reporting Deactivation Threshold for Event 1A

Full Name
Reporting Deactivation Threshold for Event 1A
Abbreviated Name
rptDeactThr
Managed Object

3GPP Name
Reporting deactivation threshold
3GPP Reference
TS 25.331
Description
This parameter indicates the maximum number of the cells that

can exist in active set. When the UE detects that one cell in the
monitoring set satisfies the threshold of event 1a, it first judges
whether the number of the cells in the current active set is not
bigger than the value indicated by this parameter. If so, event 1a is
triggered. If not, event 1a is not triggered.
Instance
ZWF21-03-001
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7)
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2242
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: control the maximum number of cells in active
set
Related factor: Set this parameter based on proper macro gain
When the UE detects that one cell in the monitoring set satisfies
the threshold of event 1a, it first judges whether the number of the
cells in the current active set is not bigger than the value indicated
by this parameter. If so, event 1a is triggered. If not, event 1a
is not triggered.For the maximum number of radio links in DCH
active set is 3, this parameter configuration should be match with
the maximum number of radio links in DCH active set, which is
maximum number of radio links in DCH active set 1.
The default value is set based on the proper macro gain.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.75.10 Replacement Activation Threshold for Event 1C and 1J

Full Name
Replacement Activation Threshold for Event 1C and 1J
Abbreviated Name
rplcActThr
Managed Object

3GPP Name
Replacement activation threshold
3GPP Reference
TS 25.331
2-2243
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the minimum number of the cells that can
exist in the DCH active set when event 1c is triggered, or in the
E-DCH active set when event 1j is triggered. When UE detects that
one cell satisfies the trigger threshold of event 1c/1j, it first checks
whether the number of the cells in the current active set is smaller
than the value indicated by this parameter. If so, event 1c/1j is not
triggered. If the value is 0, the parameter is invalid.
intra-frequency measurement event, which is 7
Instance
ZWF21-03-001
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7)
Unit
N/A
Default Value
Intra_Default
Related Parameters
meaEvtId of Intra
When MeaEvtId is 1J, rplcActThr is 0, 1, 2, 3, or 4.
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: controls the time to replace radio links.
Related factor: Set this parameter based on proper macro gain, and
number of times of soft handover.
The maximum number of radio links in DCH active set is 3, the
parameter for 1C event is configured to the maximum number. In
this case, radio link replacement is triggered only when the number
of radio links in active set reaches to the maximum number. This
replacement enhances macro gain and reduces average number of
times of handover.
This parameter is invalid for event 1J.
The default value is set based on the proper macro gain and number
Reason
of times of soft handover.
Change Take Effect
No
2-2244
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description

event triggering after Time to trigger, the event can be triggered and
reported. The larger the value is, the stricter the judgment is for
the event to be triggered. The parameter should be set according
to the actual requirements. Sometimes, if it is set too large, the
quality of calls may decrease.
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
2-2245
SJ-20141209142030-013|2015-11-12 (R1.3)
(0[0], 10[1], 20[2], 40[3], 60[4], 80[5], 100[6], 120[7], 160[8], 200[9],
240[10], 320[11], 640[12], 1280[13], 2560[14], 5000[15])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
decreases average number of handover events, and avoids

mistaken handover.
handover events, the handover success rate, the UE moving speed,
and handover area size.
If this parameter is set to a larger value, the duration that the
handover is delayed increases, the average number of times of
handover event decreases, and calls may be dropped.
If this parameter is set to a smaller value, the average number of
handover events increases, and an handover error may occur.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2246
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.75.12 Amount of Reporting for Event 1A/1B/1C/1J

Full Name
Amount of Reporting for Event 1A/1B/1C/1J
Abbreviated Name
evtRptAmount
Managed Object

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description
This parameter indicates the maximum number of times that a

measurement report is sent after event 1a/1b/1c/1j is triggered
(because they are reported periodically). After event 1a/1b/1c/1j is
triggered, the UE reports the measurement results according to the
report intervals. If the number of times that an event is reported
exceeds the value of this parameter, the UE stops reporting the
measurement results. If the result of judgment indicates that event
1a/1b/1c/1j finishes, stop reporting the measurement results even
the number of report do not reach the value of this parameter.
Instance
ZWF21-03-001
Handover Control FG
(1[0], 2[1], 4[2], 8[3], 16[4], 32[5], 64[6], Infinity[7])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2247
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the number of times that a soft handover
event is reported.
Related factor: Set this parameter based on the handover success
rate.
To avoid handover failures due to 1a/1b/1c/1j event loss, events are
reported repeatedly after being triggered. If an event is reported for
many times, the event is unlikely to be lost and then the handover
success rate becomes higher, but more system resources are
consumed, and the handover success rate may be lower.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.75.13 Reporting Interval for Event 1A/1B/1C/1J

Full Name
Reporting Interval for Event 1A/1B/1C/1J
Abbreviated Name
evtRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
2-2248
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the time interval to report the measurement

results after event 1a/1b/1c/1j is triggered (because they are
reported periodically). After event 1a/1b/1c/1j is triggered, the UE
reports the measurement results according to the report intervals.
Instance
ZWF21-03-001
Handover Control FG
(0[0], 250[1], 500[2], 1000[3], 2000[4], 4000[5], 8000[6], 16000[7])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the interval at which the software handover
event is reported.
rate.
reported repeatedly after being triggered.
If the parameter is set to a larger value, the event is reported slowly,
call drops are more likely to occur, and the handover success rate
becomes lower.
If the parameter is set to a smaller value, the event is reported
faster, and the handover success rate becomes higher, but more
system resources are taken up.
Reason
Change Take Effect
No
2-2249
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.76 UE Intra-frequency Event Measurement

Configuration for CPICH RSCP(UIntraRscpEvMeas)
2.76.1 UE Intra-frequency Event Measurement Configuration for
CPICH RSCP Object ID
Full Name

RSCP Object ID
Abbreviated Name
UIntraRscpEvMeasId
Managed Object

RSCP(UIntraRscpEvMeas)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration of UE events for which the measurement
quantity is CPICH RSCP.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
2-2250
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Event Measurement Configuration for CPICH RSCP
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
2-2251
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement.
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
(0[0], 1[1], 2[2], 3[3], 4[4], 5[5], 6[6], 7[7], 8[8], 9[9], 11[10], 13[11],
15[12], 17[13], 19[14])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2252
SJ-20141209142030-013|2015-11-12 (R1.3)
timeliness.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.76.3 Event Number of Intra-frequency Measurement

Full Name
Event Number of Intra-frequency Measurement
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2253
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates number of events required to be configured

for the set of the intra-frequency measurement parameters for a
certain purpose. The number of the events is related to the purpose
of the measurement and the judgment method of the soft handover.
The measurement parameter of the soft handover is related to the
number of the events in the soft handover algorithm.
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
1..MAX_INTRA_MEAS_EVENT
Where MAX_INTRA_MEAS_EVENT =7.
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of events required to be
configured for a intra-frequency measurement ID.

Related factor: Set this parameter based on measurement usage.
Set this parameter based on the number of events used during
intra-frequency handover, which means based on the measurement
usage.
It is recommended not to modify this parameter.
The default value is set based on the measurement usage.
Reason
Change Take Effect
No
How to Impact
N/A
2-2254
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.76.4 Intra-frequency Event Identity

Full Name
Intra-frequency Event Identity
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
Intra-frequency event identity
3GPP Reference
TS 25.331
Description
This parameter indicates the event ID triggered by the

intra-frequency measurement.
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
1a[0], 1b[1], 1c[2], 1d[3], 1e[4], 1f[5], 1j[6]
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
2-2255
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the measurement event ID.
Related factor: Set this parameter based on the definition of the

3GPP protocol.
This parameter indicates intra-frequency events defined in protocol.
One array bit corresponds to one event.
The default value is set based on the 3GPP definition.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rptRange
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2256
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
Instance
ZWF21-03-001
ZWF21-20-012
Handover Control FG
(0..14.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
and capacity.
2-2257
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(0.0..2.0), step 0.1
2-2258
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

rate increases.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2259
SJ-20141209142030-013|2015-11-12 (R1.3)
2.76.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

event type.
Instance
ZWF21-03-001
ZWF21-03-002
ZWF21-20-012
Handover Control FG
(0..7.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
2-2260
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A

mistaken handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.76.8 Threshold of the Quality of the Used Frequency for Event

1E/1F
Full Name
Threshold of the Quality of the Used Frequency for Event 1E/1F
Abbreviated Name
threshUsedFreq
2-2261
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the absolute threshold value used for

event 1e/1f.
If the pilot signaling quality is better than this threshold for a moment,
event 1e is triggered, DL DCH/UL DCH will be switched to DL
HS-DSCH/UL E-DCH or DL HS-DSCH/UL DCH.
If the pilot signaling quality is poorer than this threshold for a
moment, event 1f is triggered, DL HS-DSCH/UL E-DCH or DL
HS-DSCH/UL DCH will be switched to DL DCH/UL DCH.
Instance
ZWF23-04-004
CPICH RSCP: (-115..-25) dBm, step 1dBm
Unit
dBm
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: delays the delivery of handover event, and
reduces the average number of handover events.

times of handover and handover success ratio.
For 1E, the bigger this parameter is, the harder is to trigger this
event; otherwise, the smaller this parameter is, the easier is to
trigger this event.
For 1F, the bigger this parameter is, the easier is to trigger this
event; otherwise, the smaller this parameter is, the harder is to
trigger this event.
2-2262
SJ-20141209142030-013|2015-11-12 (R1.3)
When event is easier to be triggered, average handover times and

handover success rate increase, but more system resources are
consumed.
The default value is set based on the average number of handover
Reason
events and handover success ratio.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rptDeactThr
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

2-2263
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-001
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7)
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
set
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2264
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.76.10 Replacement Activation Threshold for Event 1C and 1J

Full Name
Replacement Activation Threshold for Event 1C and 1J
Abbreviated Name
rplcActThr
Managed Object

3GPP Name
Replacement activation threshold
3GPP Reference
TS 25.331
Description
This parameter indicates the minimum number of the cells that can
exist in the DCH active set when event 1c is triggered, or in the
E-DCH active set when event 1j is triggered. When UE detects that
one cell satisfies the trigger threshold of event 1c/1j, it first checks
whether the number of the cells in the current active set is smaller
than the value indicated by this parameter. If so, event 1c/1j is not
triggered. If the value is 0, the parameter is invalid.
intra-frequency measurement event, which is 7
Instance
ZWF21-03-001
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7)
Unit
N/A
Default Value
Intra_Default
Related Parameters
meaEvtId of Intra
When MeaEvtId is 1J, rplcActThr is 0, 1, 2, 3, or 4.
Parameters
2-2265
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: controls the time to replace radio links.
Related factor: Set this parameter based on proper macro gain, and
number of times of soft handover.
The maximum number of radio links in DCH active set is 3, the
parameter for 1C event is configured to the maximum number. In
this case, radio link replacement is triggered only when the number
of radio links in active set reaches to the maximum number. This
replacement enhances macro gain and reduces average number of
times of handover.
This parameter is invalid for event 1J.
The default value is set based on the proper macro gain and number
Reason
of times of soft handover.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

2-2266
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
(0[0], 10[1], 20[2], 40[3], 60[4], 80[5], 100[6], 120[7], 160[8], 200[9],
240[10], 320[11], 640[12], 1280[13], 2560[14], 5000[15])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2267
SJ-20141209142030-013|2015-11-12 (R1.3)

mistaken handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
evtRptAmount
Managed Object

3GPP Name
Amount of reporting
2-2268
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(1[0], 2[1], 4[2], 8[3], 16[4], 32[5], 64[6], Infinity[7])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
event is reported.
rate.
Reason
Change Take Effect
2-2269
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
evtRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(0[0], 250[1], 500[2], 1000[3], 2000[4], 4000[5], 8000[6], 16000[7])ms
Unit
ms
Default Value
Intra_Default
2-2270
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
event is reported.
rate.
becomes lower.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2271
SJ-20141209142030-013|2015-11-12 (R1.3)
2.77 Intra-frequency Measurement

Configuration Unrelated to Traffic
Category(UIntraMeasNoSrvSpec)
2.77.1 Intra-frequency Measurement Configuration Unrelated to
Full Name

Category Object ID
Abbreviated Name
UIntraMeasNoSrvSpecId
Managed Object

Category(UIntraMeasNoSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration unrelated to traffic categories.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2272
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Configuration Unrelated to Traffic Category
N/A
N/A
2.78 UE Intra-frequency Period

Measurement Configuration for CPICH
Ec/No(UIntraEcNoPrdMeas)
2.78.1 UE Intra-frequency Period Measurement Configuration for
CPICH Ec/No Object ID
Full Name

Ec/No Object ID
Abbreviated Name
UIntraEcNoPrdMeasId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of intra-frequency

measurement configuration of UE periods for which the
Instance
RNC
2-2273
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Configuration Unrelated to Traffic Category->UE Intra-frequency
Period Measurement Configuration for CPICH Ec/No
N/A
N/A

Full Name
Filter Coefficient
2-2274
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
Instance
N/A
N/A
(0[0], 1[1], 2[2], 3[3], 4[4], 5[5], 6[6], 7[7], 8[8], 9[9], 11[10], 13[11],
15[12], 17[13], 19[14])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
2-2275
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
timeliness.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
prdRptAmount
Managed Object

3GPP Name
Amount of reporting
2-2276
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

measurement results are periodically reported. The UE uses
this parameter to determine whether it needs to report more
measurement results. If the number of times that measurement
results are reported exceeds the value of this parameter, the UE
stops reporting the measurement results.
Instance
N/A
N/A
(1[0], 2[1], 4[2], 8[3], 16[4], 32[5], 64[6], Infinity[7])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the number of times that a report is sent in
periodical reporting
rate.
If this parameter is set to a larger value, the handover accuracy is
higher, and the success ratio is higher, but more system resources
are occupied.Otherwise, The parameter is smaller, the events'
reports are less, the risk of call drop increase and then handover
success rate may decrease.
Reason
Change Take Effect
No
How to Impact
N/A
2-2277
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
prdRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description
This parameter indicates the reporting interval for periodic reporting

mode. UE reports the measurement results according to the report
intervals.
Instance
N/A
N/A
(250[1], 500[2], 1000[3], 2000[4], 3000[5], 4000[6], 6000[7], 8000[8],

12000[9], 16000[10], 20000[11], 24000[12], 28000[13], 32000[14],
64000[15])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
2-2278
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: Report interval in periodical reporting

rate.
If this parameter is bigger, report is slower, possibility of call-drop
increases, and handover success rate falls down. Otherwise, this
parameter is smaller, report is frequent and handover success rate
increases, but more system resources are occupied.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.79 UE Intra-frequency Period

RSCP(UIntraRscpPrdMeas)
2.79.1 UE Intra-frequency Period Measurement Configuration for
CPICH RSCP Object ID
Full Name

RSCP Object ID
Abbreviated Name
UIntraRscpPrdMeasId
2-2279
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement quantity is CPICH RSCP.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
2-2280
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Period Measurement Configuration for CPICH RSCP
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
Instance
2-2281
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
(0[0], 1[1], 2[2], 3[3], 4[4], 5[5], 6[6], 7[7], 8[8], 9[9], 11[10], 13[11],
15[12], 17[13], 19[14])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
timeliness.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2282
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Abbreviated Name
prdRptAmount
Managed Object

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description

measurement results are periodically reported. The UE uses
this parameter to determine whether it needs to report more
measurement results. If the number of times that measurement
results are reported exceeds the value of this parameter, the UE
stops reporting the measurement results.
Instance
N/A
N/A
(1[0], 2[1], 4[2], 8[3], 16[4], 32[5], 64[6], Infinity[7])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-2283
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the number of times that a report is sent in
periodical reporting
rate.
If this parameter is set to a larger value, the handover accuracy is
higher, and the success ratio is higher, but more system resources
are occupied.Otherwise, The parameter is smaller, the events'
reports are less, the risk of call drop increase and then handover
success rate may decrease.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
prdRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description
This parameter indicates the reporting interval for periodic reporting

mode. UE reports the measurement results according to the report
intervals.
2-2284
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
N/A
N/A
(250[1], 500[2], 1000[3], 2000[4], 3000[5], 4000[6], 6000[7], 8000[8],

12000[9], 16000[10], 20000[11], 24000[12], 28000[13], 32000[14],
64000[15])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: Report interval in periodical reporting

rate.
If this parameter is bigger, report is slower, possibility of call-drop
increases, and handover success rate falls down. Otherwise, this
parameter is smaller, report is frequent and handover success rate
increases, but more system resources are occupied.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2285
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.80 Detected Set Measurement Configuration for

CPICH Ec/No(UIntraEcNoEvMeasForD)
2.80.1 Detected SetMeasurement Configuration for CPICH Ec/No
Object ID
Full Name
Detected SetMeasurement Configuration for CPICH Ec/No Object ID
Abbreviated Name
UIntraEcNoEvMeasForDId
Managed Object

Ec/No(UIntraEcNoEvMeasForD)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration used by the detected set for which the
measurement quantity is Ec/No.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2286
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Configuration Unrelated to Traffic Category->Detected Set
Measurement Configuration for CPICH Ec/No
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
2-2287
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
(0[0], 1[1], 2[2], 3[3], 4[4], 5[5], 6[6], 7[7], 8[8], 9[9], 11[10], 13[11],
15[12], 17[13], 19[14])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
timeliness.
2-2288
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rptRange
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
Instance

ZWF21-03-001
ZWF21-20-012
2-2289
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
(0..14.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
N/A
and capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2290
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
2-2291
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A

rate increases.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.80.5 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
2-2292
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

event type.
Instance
ZWF21-03-001
ZWF21-03-002
ZWF21-20-012
Handover Control FG
(0..7.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2293
SJ-20141209142030-013|2015-11-12 (R1.3)

mistaken handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rptDeactThr
Managed Object

2-2294
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7)
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
set
Reason
2-2295
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
ZWF21-03-002
2-2296
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
(0[0], 10[1], 20[2], 40[3], 60[4], 80[5], 100[6], 120[7], 160[8], 200[9],
240[10], 320[11], 640[12], 1280[13], 2560[14], 5000[15])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

mistaken handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2297
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
evtRptAmount
Managed Object

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(1[0], 2[1], 4[2], 8[3], 16[4], 32[5], 64[6], Infinity[7])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
2-2298
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
event is reported.
rate.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
evtRptInterval
2-2299
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(0[0], 250[1], 500[2], 1000[3], 2000[4], 4000[5], 8000[6], 16000[7])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
event is reported.
rate.
becomes lower.
2-2300
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.81 Detected Set Measurement Configuration for

CPICH RSCP(UIntraRscpEvMeasForD)
2.81.1 Detected SetMeasurement Configuration for CPICH RSCP
Object ID
Full Name
Detected SetMeasurement Configuration for CPICH RSCP Object

ID
Abbreviated Name
UIntraRscpEvMeasForDId
Managed Object

RSCP(UIntraRscpEvMeasForD)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration used by the detected set for which the
Instance
RNC
2-2301
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
Measurement Configuration for CPICH RSCP
N/A
N/A

Full Name
Filter Coefficient
2-2302
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
Instance

ZWF21-03-001
ZWF21-03-002
Handover Control FG
(0[0], 1[1], 2[2], 3[3], 4[4], 5[5], 6[6], 7[7], 8[8], 9[9], 11[10], 13[11],
15[12], 17[13], 19[14])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
2-2303
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
timeliness.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rptRange
Managed Object

2-2304
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.331
Description
Instance
ZWF21-03-001
ZWF21-20-012
Handover Control FG
(0..14.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2305
SJ-20141209142030-013|2015-11-12 (R1.3)

and capacity.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
2-2306
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

rate increases.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2307
SJ-20141209142030-013|2015-11-12 (R1.3)
2.81.5 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

event type.
Instance
ZWF21-03-001
ZWF21-03-002
ZWF21-20-012
Handover Control FG
(0..7.5)dB, step 0.5dB
Unit
dB
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
2-2308
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A

mistaken handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
rptDeactThr
2-2309
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7)
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
set
2-2310
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description

2-2311
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-001
ZWF21-03-002
Handover Control FG
(0[0], 10[1], 20[2], 40[3], 60[4], 80[5], 100[6], 120[7], 160[8], 200[9],
240[10], 320[11], 640[12], 1280[13], 2560[14], 5000[15])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A

mistaken handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2312
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
evtRptAmount
Managed Object

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(1[0], 2[1], 4[2], 8[3], 16[4], 32[5], 64[6], Infinity[7])
Unit
N/A
Default Value
Intra_Default
Related Parameters
N/A
2-2313
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
event is reported.
rate.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
evtRptInterval
2-2314
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-001
Handover Control FG
(0[0], 250[1], 500[2], 1000[3], 2000[4], 4000[5], 8000[6], 16000[7])ms
Unit
ms
Default Value
Intra_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
event is reported.
rate.
becomes lower.
2-2315
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.82 UE Inter-frequency Measurement

Profile(UInterMeasProfile)
2.82.1 UE Inter-frequency Measurement Profile Object ID
Full Name
UE Inter-frequency Measurement Profile Object ID
Abbreviated Name
UInterMeasProfileId
Managed Object
UE Inter-frequency Measurement Profile(UInterMeasProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the inter-frequency

Instance
RNC
N/A
N/A
N/A
0..2147483647
2-2316
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Measurement Configuration->UE

Inter-frequency Measurement Profile
N/A
N/A
2.82.2 Inter-frequency Measurement Profile Identity

Full Name
Inter-frequency Measurement Profile Identity
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2317
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the profile ID of a set of inter-frequency

measurement parameters. Each cell obtains the inter-frequency
Instance
UTRAN Cell
ZWF21-03-003
Handover Control FG
0..99
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: profile ID of a set of inter-frequency
measurement parameters
Reason
planning.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2-2318
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
intialHoCelSelScene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
UTRAN Cell
ZWF21-03-003
Handover Control FG
0: Outdoor Scene
2: Indoor Scene
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

0: outdoor scenario
2: indoor scenario
2-2319
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2.83 Inter-frequency Measurement Configuration

Related to Traffic Category(UInterMeaSrvSpec)
2.83.1 Inter-frequency Measurement Configuration Related to
Full Name

Category Object ID
Abbreviated Name
UInterMeaSrvSpecId
Managed Object

Category(UInterMeaSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement configuration related to traffic categories.
Instance
RNC
N/A
N/A
N/A
2-2320
SJ-20141209142030-013|2015-11-12 (R1.3)
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Inter-frequency Measurement Profile->Inter-frequency
Measurement Configuration Related to Traffic Category
N/A
N/A

Configuration
Full Name

Configuration
Abbreviated Name
srvCategory
Managed Object

Category(UInterMeaSrvSpec)
2-2321
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement, which must be used in all services.
Instance
ZWF21-03-003
Handover Control FG

Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
differentiating handover configurations during inter-frequency

measurement
optimization
2-2322
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

Measurement Configuration Related to Traffic Category
N/A
N/A
2.84 UE Inter-frequency Event

Ec/No(UTRAN)(UInterEcNoEvMeasforU)
2.84.1 UE Inter-frequency Event Measurement Configuration Object
ID for CPICH Ec/No (UTRAN)
Full Name
UE Inter-frequency Event Measurement Configuration Object ID for

CPICH Ec/No (UTRAN)
Abbreviated Name
UInterEcNoEvMeasforUId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of inter-frequency

measurement quantity is CPICH Ec/No (UTRAN).
Instance
RNC
2-2323
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Measurement Configuration Related to Traffic Category->UE
Inter-frequency Event Measurement Configuration for CPICH
Ec/No(UTRAN)
N/A
N/A

Full Name
Filter Coefficient
2-2324
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description
This parameter indicates the filtering factor that is used by a UE to

perform L3 filtering on inter-frequency measurement results.
On the UE side, a UE performs L1 inter-frequency measurement
at a fixed measurement cycle (during which several points are
measured. How L1 filters the measurement result depends on
UEs.). After that, L1 reports the result to L3 at certain time intervals
and L3 performs filtering on the latest measurement result and
the previous measurement result. The filtering shall be performed
based on the following formula specified in 3GPP TS 25.331: Fn =
(1-a)*Fn-1 +a*Mn, in which:
Fn indicates the currently filtered measurement result;
Fn-1 indicates the previously filtered measurement result;
Mn indicates the latest measurement result;
a = 1/2^ (k/2), in which k is the filtering factor;
Note: If k is set to 0, no L3 filtering is performed.
From the above formula, the smaller the value of the filtering
factor is, the greater impact the latest measurement result has on
the measurement result that is finally reported to an RNC (in the
periodical report) or that is used for determination (in the event
report).
Instance
ZWF21-03-003
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-2325
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: filtering factor used by a UE to perform L3
filtering on inter-frequency measurement results

Related factors: fluctuation of the signal quality, timeliness of
measurement
The greater the parameter value is, the less impact the current
measurement has on the final inter-frequency measurement results,
and vice versa.
The default parameter value is set based on the fluctuation of the
Reason
signal quality and the timeliness of the measurement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
N/A
N/A
2.84.3 Event Number of Inter-frequency Measurement

Full Name
Event Number of Inter-frequency Measurement
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2326
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the number of events required to be

configured for an inter-frequency measurement configuration
number for a certain purpose. This parameter is related to the
method of determining inter-frequency handover.
Instance
ZWF21-03-003
Handover Control FG
1..MAX_INTER_MEAS_EVENT
Where MAX_INTER_MEAS_EVENT =6.
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: number of events required to be configured for
an inter-frequency measurement configuration number for a certain

purpose
Related factors: measurement purposes
This parameter is set based on the number of events required in
actual inter-frequency handover, which means that this parameter is
set based on measurement purposes.
The default parameter value is set based on measurement
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2327
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Ec/No(UTRAN)
N/A
N/A
2.84.4 Inter-frequency Event Identity

Full Name
Inter-frequency Event Identity
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
Inter-frequency event identity
3GPP Reference
TS 25.331
Description
MAX_INTER_MEAS_EVENT indicates the maximum number of

inter-frequency measurement events, and its value is 6.
Instance
ZWF21-03-003
Handover Control FG
2a, 2b, 2c, 2d, 2e, 2f
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_INTER_MEAS_EVENT]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2328
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: ID of the event triggered by inter-frequency
measurement
Related factors: definition in 3GPP specifications
This parameter indicates inter-frequency events defined in 3GPP
specifications. One array bit corresponds to one event.
The default parameter value is set based on 3GPP specifications.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
N/A
N/A
2.84.5 Absolute Threshold of the Quality of the Currently Used

Frequency for 2B/2D/2F
Full Name
Absolute Threshold of the Quality of the Currently Used Frequency

for 2B/2D/2F
Abbreviated Name
threshUsedFreq
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2329
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the absolute threshold required to be

configured for the 2b/2d/2f events (to determine the quality of the
currently used carrier frequency). If the quality of the currently
used carrier frequency is lower than "the value of this parameter
- the value of the corresponding hysteresis/2" for a period of
time, this carrier frequency is considered as in poor quality, and
inter-frequency and inter-RAT measurements should be performed.
If the quality of the currently used carrier frequency is higher than
"the value of this parameter + the value of the corresponding
hysteresis/2" for a period of time, this carrier frequency is considered
as in good quality, and inter-frequency and inter-RAT measurements
do not need to be performed.
Instance
ZWF21-03-003
Handover Control FG
CPICH RSCP: (-115..-25 )dBm, step 1dB

Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: absolute threshold required to be configured for
the 2b/2d/2f events (to determine the quality of the currently used
carrier frequency). It is used to delay handover event reporting and
decrease the average number of handover times
Related factors: average number of handover times, handover
success rate
For the 2d events, the greater the parameter value is, the easier it is
to trigger this event, and vice versa.
For the 2f event, the greater the parameter value is, the more
difficult it is to trigger this event. The smaller the parameter value is,
the easier it is to trigger this event,
2-2330
SJ-20141209142030-013|2015-11-12 (R1.3)
which leads to increased average number of handover times and

handover success rate, and more system resource consumption.
The default parameter value is set based on the average number of
Reason
handover times and the handover success rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
N/A
N/A
2.84.6 Weight of the Currently Used Frequency for 2A/2B/2D/2F

Full Name
Weight of the Currently Used Frequency for 2A/2B/2D/2F
Abbreviated Name
wUsed
Managed Object

3GPP Name
W used frequency
3GPP Reference
TS 25.331
Description
This parameter indicates the weight of the cell with best signal in the
quality evaluation of the currently used carrier frequency (for the
2a/2b/2d/2f events only). It is related to the measurement quantity
and event types.
Instance
ZWF21-03-003
2-2331
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[DBS_RR_MAX_INTER_MEAS_EVENT]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: weight of the cell with best signal in the

2a/2b/2d/2f events only)
Related factors: signal quality of a cell, handover success rate
The smaller the parameter value is, the greater the weight of the cell
with best signal is in the quality evaluation of the currently used
carrier frequency, and the smaller the weight of other cells is, which
leads to increased handover success rate.
The greater the parameter value is, the smaller the weight of the cell
carrier frequency, and the greater the weight of other cells is, which
leads to error handover.
The default parameter value is set based on the handover success
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
2-2332
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.84.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description
This parameter indicates the hysteresis used to determine whether

to trigger an event. This parameter is used as a reference to
distinguish the status to trigger an event from the status to end the
event to avoid the transition of statuses due to a small change.
Events are configured separately and can be configured with
different values.
Instance
ZWF21-03-003
Handover Control FG
(0, 0.5..14.5)dB, step 0.5dB
Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2333
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: hysteresis used to determine whether to trigger
an event. It is used to delay handover event reporting, reduce the

average number of handover times and avoid error handover.
success rate, velocity of a UE, handover area
The greater the parameter value is, the less the probability of
triggering inter-frequency event is, which leads to decreased
average number of handover times and consequently increased
call drop risk. The smaller the parameter value is, the greater the
probability of triggering inter-frequency event is, which leads to
increased average number of handover times and consequently
increased error handover risk.
For the scenarios where the handover area is small or UEs move
fast, to ensure the handover can be triggered quickly, this parameter
should be set to a smaller value. Otherwise, this parameter should
be set to a larger value.
Reason
handover times, the handover success rate, the velocity of a UE,

and the handover area.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
N/A
N/A

Full Name
Time to Trigger
2-2334
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
This parameter indicates the time interval from the time an event is
detected to the time it is reported. An event is triggered and the
measurement report is reported only when the event occurrence is
detected and event triggering conditions can still be met after the
period of time indicated by Time to trigger. The greater the value of
Time to trigger is, the stricter the determination for event triggering
will be. But this parameter should be set based on actual needs,
because excessively great value may decrease the communication
quality of users.
Instance
ZWF21-03-003
Handover Control FG
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2335
SJ-20141209142030-013|2015-11-12 (R1.3)

The greater the parameter value is, the longer it is to trigger the
handover event, which leads to decreased average number of
handover times and consequently increased call drop risk.
The smaller the parameter value is, the more the average number of
handover times is, which leads to increased error handover risk.
Reason
handover times, the handover success rate, and the handover area.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
N/A
N/A
2.84.9 Absolute Threshold of the Quality of the Non-used

Frequency for 2B/2C/2E
Full Name
Absolute Threshold of the Quality of the Non-used Frequency for

2B/2C/2E
Abbreviated Name
threshNoUsedFreq
2-2336
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
Threshold non used frequency
3GPP Reference
TS 25.331
Description

configured for the 2b/2c/2e events (to determine the quality of
the unused carrier frequency). If the quality of the unused carrier
frequency is higher than "the value of this parameter + the value
of the corresponding hysteresis/2" for a period of time, this carrier
frequency is considered as in good quality and can be treated
as the target carrier frequency for handover. If the quality of the
unused carrier frequency is lower than "the value of this parameter
- the value of the corresponding hysteresis/2" for a period of time,
this carrier frequency is considered as in poor quality. If all the
carrier frequencies in the system are in poor quality, inter-RAT
measurement may be triggered.
Instance
ZWF21-03-003
Handover Control FG

Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2337
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: absolute threshold required to be configured
for the 2b/2c/2e events (to determine the quality of the unused
success rate
For the 2b/2c events, the smaller the parameter value is, the easier
it is to trigger inter-frequency handover.
For the 2e event, the smaller the parameter value is, the easier it is
to enable inter-RAT measurement and to trigger this event,
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
N/A
N/A
2.84.10 Weight of the Non-used Frequency for 2A/2B/2C/2E

Full Name
Weight of the Non-used Frequency for 2A/2B/2C/2E
Abbreviated Name
wNoUsed
Managed Object

3GPP Name
W non-used frequency
2-2338
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description
This parameter indicates the weight of the cell with best signal in
the quality evaluation of the non-used carrier frequency (for the
2a/2b/2c/2e events only). It is related to the measurement quantity
and event types.
Instance
ZWF21-03-003
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: weight of the cell with best signal in the quality
evaluation of the non-used carrier frequency (for the 2a/2b/2c/2e

events only)
The smaller the parameter value is, the greater the weight of the
cell with best signal is in the quality evaluation of non-used carrier
frequency, and the smaller the weight of other cells is, which leads
to increased handover success rate.
The greater the parameter value is, the smaller the weight of the
frequency, and the greater the weight of other cells is, which leads
to error handover.
Reason
rate.
Change Take Effect
No
2-2339
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(UTRAN)
N/A
N/A

RSCP(UTRAN)(UInterRscpEvMeasforU)
ID for CPICH RSCP (UTRAN)
Full Name

CPICH RSCP (UTRAN)
Abbreviated Name
UInterRscpEvMeasforUId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement quantity is CPICH RSCP (UTRAN).
Instance
RNC
N/A
N/A
N/A
2-2340
SJ-20141209142030-013|2015-11-12 (R1.3)
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

RSCP(UTRAN)
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

2-2341
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

report).
Instance
ZWF21-03-003
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2342
SJ-20141209142030-013|2015-11-12 (R1.3)

measurement
and vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2343
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
ZWF21-03-003
Handover Control FG
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2344
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

RSCP(UTRAN)
N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the ID of the event triggered by

inter-frequency measurement. It is related to the measurement
quantity.
Instance
ZWF21-03-003
Handover Control FG
2a, 2b, 2c, 2d, 2e, 2f
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2345
SJ-20141209142030-013|2015-11-12 (R1.3)
measurement
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
N/A
N/A

Frequency for 2B/2D/2F
Full Name

for 2B/2D/2F
Abbreviated Name
threshUsedFreq
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2346
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

configured for the 2b/2d/2f events (to determine the quality of the
Instance
ZWF21-03-003
Handover Control FG

Unit
dBm
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: absolute threshold required to be configured for
the 2b/2d/2f events (to determine the quality of the currently used
success rate
2-2347
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
N/A
N/A
2.85.6 Weight of the Currently Used Frequency for 2A/2B/2D/2F

Full Name
Weight of the Currently Used Frequency for 2A/2B/2D/2F
Abbreviated Name
wUsed
Managed Object

3GPP Name
W used frequency
3GPP Reference
TS 25.331
Description
This parameter indicates the weight of the cell with best signal in the
2a/2b/2d/2f events only). It is related to the measurement quantity
and event types.
Instance
ZWF21-03-003
2-2348
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: weight of the cell with best signal in the

2a/2b/2d/2f events only)
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
2-2349
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.85.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

different values.
Instance
ZWF21-03-003
Handover Control FG
(0, 0.5..14.5)dB, step 0.5dB
Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2350
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
N/A
N/A

Full Name
Time to Trigger
2-2351
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
quality of users.
Instance
ZWF21-03-003
Handover Control FG
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2352
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
N/A
N/A
2.85.9 Absolute Threshold of the Quality of the Non-used

Frequency for 2B/2C/2E
Full Name
Absolute Threshold of the Quality of the Non-used Frequency for

2B/2C/2E
Abbreviated Name
threshNoUsedFreq
2-2353
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
Threshold non used frequency
3GPP Reference
TS 25.331
Description

configured for the 2b/2c/2e events (to determine the quality of
the unused carrier frequency). If the quality of the unused carrier
frequency is higher than "the value of this parameter + the value
of the corresponding hysteresis/2" for a period of time, this carrier
frequency is considered as in good quality and can be treated
as the target carrier frequency for handover. If the quality of the
unused carrier frequency is lower than "the value of this parameter
- the value of the corresponding hysteresis/2" for a period of time,
this carrier frequency is considered as in poor quality. If all the
carrier frequencies in the system are in poor quality, inter-RAT
measurement may be triggered.
Instance
ZWF21-03-003
Handover Control FG

Unit
dBm
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2354
SJ-20141209142030-013|2015-11-12 (R1.3)
for the 2b/2c/2e events (to determine the quality of the unused
success rate
For the 2b/2c events, the smaller the parameter value is, the easier
it is to trigger inter-frequency handover.
For the 2e event, the smaller the parameter value is, the easier it is
to enable inter-RAT measurement and to trigger this event,
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
N/A
N/A
2.85.10 Weight of the Non-used Frequency for 2A/2B/2C/2E

Full Name
Weight of the Non-used Frequency for 2A/2B/2C/2E
Abbreviated Name
wNoUsed
Managed Object

3GPP Name
W non-used frequency
2-2355
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description
the quality evaluation of the non-used carrier frequency (for the
2a/2b/2c/2e events only). It is related to the measurement quantity
and event types.
Instance
ZWF21-03-003
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
evaluation of the non-used carrier frequency (for the 2a/2b/2c/2e

events only)
The smaller the parameter value is, the greater the weight of the
frequency, and the smaller the weight of other cells is, which leads
to increased handover success rate.
The greater the parameter value is, the smaller the weight of the
frequency, and the greater the weight of other cells is, which leads
to error handover.
Reason
rate.
Change Take Effect
No
2-2356
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(UTRAN)
N/A
N/A

Ec/No(GSM)(UInterEcNoEvMeasforG)
ID for CPICH Ec/No (GSM)
Full Name
UE Inter-frequency Event Measurement Configuration Object ID

for CPICH Ec/No (GSM)
Abbreviated Name
UInterEcNoEvMeasforGId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement quantity is CPICH Ec/No (GSM).
Instance
RNC
N/A
N/A
N/A
2-2357
SJ-20141209142030-013|2015-11-12 (R1.3)
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Ec/No(GSM)
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

2-2358
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

report).
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2359
SJ-20141209142030-013|2015-11-12 (R1.3)

measurement
and vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(GSM)
N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2360
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2361
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Ec/No(GSM)
N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
2a, 2b, 2c, 2d, 2e, 2f
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2362
SJ-20141209142030-013|2015-11-12 (R1.3)
measurement
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(GSM)
N/A
N/A

Frequency for 2D/2F
Full Name

for 2D/2F
Abbreviated Name
threshUsedFreq
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2363
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

configured for the 2d/2f events (to determine the quality of the
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG

Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
for the 2d/2f events (to determine the quality of the currently used
success rate
2-2364
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(GSM)
N/A
N/A
2.86.6 Weight of the Currently Used Frequency for 2D/2F

Full Name
Weight of the Currently Used Frequency for 2D/2F
Abbreviated Name
wUsed
Managed Object

3GPP Name
W used frequency
3GPP Reference
TS 25.331
Description
the quality evaluation of the currently used carrier frequency (for
the 2d/2f events only). It is related to the measurement quantity
and event types.
Instance
ZWF21-03-004
2-2365
SJ-20141209142030-013|2015-11-12 (R1.3)
Inter-RAT Mobility
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
evaluation of the currently used carrier frequency (for the 2d/2f

events )
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(GSM)
2-2366
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.86.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

different values.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 0.5..14.5)dB, step 0.5dB
Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2367
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(GSM)
N/A
N/A

Full Name
Time to Trigger
2-2368
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
quality of users.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2369
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(GSM)
N/A
N/A

RSCP(GSM)(UInterRscpEvMeasforG)
2-2370
SJ-20141209142030-013|2015-11-12 (R1.3)
2.87.1 Inter-frequency Event Measurement Configuration Object ID

for CPICH RSCP (GSM)
Full Name
Inter-frequency Event Measurement Configuration Object ID for

CPICH RSCP (GSM)
Abbreviated Name
UInterRscpEvMeasforGId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement quantity is CPICH RSCP (GSM).
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-2371
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path

RSCP(GSM)
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

2-2372
SJ-20141209142030-013|2015-11-12 (R1.3)

report).
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
and vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2373
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

RSCP(GSM)
N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-2374
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(GSM)
N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2375
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

quantity.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
2a, 2b, 2c, 2d, 2e, 2f
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
measurement
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(GSM)
N/A
2-2376
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Frequency for 2D/2F
Full Name

for 2D/2F
Abbreviated Name
threshUsedFreq
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG

Unit
dBm
Default Value
Inter_Default
Related Parameters
N/A
2-2377
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
success rate
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(GSM)
N/A
N/A
2-2378
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
wUsed
Managed Object

3GPP Name
W used frequency
3GPP Reference
TS 25.331
Description
and event types.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2379
SJ-20141209142030-013|2015-11-12 (R1.3)

events )
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(GSM)
N/A
N/A
2.87.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
2-2380
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

different values.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 0.5..14.5)dB, step 0.5dB
Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2381
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(GSM)
N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
2-2382
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
quality of users.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2383
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(GSM)
N/A
N/A

Ec/No(EUTRAN)(UInterEcNoEvMeasforE)
ID for CPICH Ec/No (EUTRAN)
Full Name

CPICH Ec/No (EUTRAN)
Abbreviated Name
UInterEcNoEvMeasforEId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2384
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement quantity is CPICH Ec/No (EUTRAN).
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Ec/No(EUTRAN)
N/A
N/A
2-2385
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

report).
Instance
ZWF21-03-110
Handover with LTE
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
2-2386
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
and vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(EUTRAN)
N/A
N/A

Full Name
Abbreviated Name
measEvtNum
2-2387
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
ZWF21-03-110
Handover with LTE
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
2-2388
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(EUTRAN)
N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE
2a, 2b, 2c, 2d, 2e, 2f
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Fixed
2-2389
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
measurement
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(EUTRAN)
N/A
N/A

Frequency for 2D/2F
Full Name

for 2D/2F
Abbreviated Name
threshUsedFreq
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2390
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
ZWF21-03-110
Handover with LTE

Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
success rate
2-2391
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(EUTRAN)
N/A
N/A

Full Name
Abbreviated Name
wUsed
Managed Object

3GPP Name
W used frequency
3GPP Reference
TS 25.331
Description
and event types.
Instance
ZWF21-03-110
2-2392
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover with LTE
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

events )
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(EUTRAN)
2-2393
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.88.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

different values.
Instance
ZWF21-03-110
Handover with LTE
(0, 0.5..14.5)dB, step 0.5dB
Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2394
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(EUTRAN)
N/A
N/A

Full Name
Time to Trigger
2-2395
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
quality of users.
Instance
ZWF21-03-110
Handover with LTE
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2396
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Ec/No(EUTRAN)
N/A
N/A

RSCP(EUTRAN)(UInterRscpEvMeasforE)
2-2397
SJ-20141209142030-013|2015-11-12 (R1.3)

ID for CPICH RSCP (EUTRAN)
Full Name

CPICH RSCP (EUTRAN)
Abbreviated Name
UInterRscpEvMeasforEId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

measurement quantity is CPICH RSCP (EUTRAN).
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-2398
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path

RSCP(EUTRAN)
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

2-2399
SJ-20141209142030-013|2015-11-12 (R1.3)

report).
Instance
ZWF21-03-110
Handover with LTE
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
and vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2400
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

RSCP(EUTRAN)
N/A
N/A

Full Name
Abbreviated Name
measEvtNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
ZWF21-03-110
Handover with LTE
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-2401
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(EUTRAN)
N/A
N/A

Full Name
Abbreviated Name
meaEvtId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2402
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

quantity.
Instance
ZWF21-03-110
Handover with LTE
2a, 2b, 2c, 2d, 2e, 2f
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
measurement
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(EUTRAN)
N/A
2-2403
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Frequency for 2D/2F
Full Name

for 2D/2F
Abbreviated Name
threshUsedFreq
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE

Unit
dBm
Default Value
Inter_Default
Related Parameters
N/A
2-2404
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
success rate
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(EUTRAN)
N/A
N/A
2-2405
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
wUsed
Managed Object

3GPP Name
W used frequency
3GPP Reference
TS 25.331
Description
and event types.
Instance
ZWF21-03-110
Handover with LTE
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2406
SJ-20141209142030-013|2015-11-12 (R1.3)

events )
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(EUTRAN)
N/A
N/A
2.89.7 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
2-2407
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

different values.
Instance
ZWF21-03-110
Handover with LTE
(0, 0.5..14.5)dB, step 0.5dB
Unit
dB
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[2]
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2408
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(EUTRAN)
N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
2-2409
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
quality of users.
Instance
ZWF21-03-110
Handover with LTE
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2410
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP(EUTRAN)
N/A
N/A
2.90 Inter-frequency Measurement

Configuration Unrelated to Traffic
Category(UInterMeasNoSrvSpec)
2.90.1 Inter-frequency Measurement Configuration Unrelated to
Full Name

Category Object ID
Abbreviated Name
UInterMeasNoSrvSpecId
Managed Object

Category(UInterMeasNoSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
2-2411
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement configuration unrelated to traffic categories.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Measurement Configuration Unrelated to Traffic Category
N/A
N/A
2-2412
SJ-20141209142030-013|2015-11-12 (R1.3)
2.91 UE Inter-frequency Period

Ec/No(UInterEcNoPrdMeas)
2.91.1 UE Inter-frequency Period Measurement Configuration
Object ID for CPICH Ec/No
Full Name
UE Inter-frequency Period Measurement Configuration Object ID for

CPICH Ec/No
Abbreviated Name
UInterEcNoPrdMeasId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2413
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Measurement Configuration Unrelated to Traffic Category->UE
Inter-frequency Period Measurement Configuration for CPICH Ec/No
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

2-2414
SJ-20141209142030-013|2015-11-12 (R1.3)

report).
Instance
ZWF21-03-003
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
and vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2415
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptAmount
Managed Object

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description
This parameter indicates the number of times that periodical reports

are reported. A UE uses the parameter Amount of reporting to
determine whether measurement reports are also needed. If the UE
detects that the number of times of event reporting exceeds the
value of the parameter, it stops reporting measurement reports.
Instance
ZWF21-03-003
Handover Control FG
1, 2, 4, 8, 16, 32, 64, Infinity
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-2416
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: RLC mode used for measurement result
reporting
Related factors: accuracy of transmission, system capacity
If AM mode is used, an RNC can request a UE for retransmission
after receiving the error SDU label (not continuous). If UM mode
is used, the retransmission is not required. Because signaling is
more important, AM mode is used to provide the reliable signaling
transmission.
The default parameter value is set based on transmission accuracy
Reason
and system capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
2-2417
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the time interval at which a UE reports

periodical reports. For periodical reports, the UE periodically reports
measurement results based on this parameter.
Instance
ZWF21-03-003
Handover Control FG
(250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000,
20000, 24000, 28000, 32000, 64000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: indicator of whether to report the measurement
result based on the measurement quantity pathloss

Related factors: handover success rate
If the parameter is set to True, the measurement result is reported
based on the measurement quantity pathloss. If the parameter is
set to False, the measurement result is not reported based on the
measurement quantity pathloss.
As an RNC can calculate Pathloss by using Cpich RSCP, (Pathloss
= transmit power - Cpich RSCP), if Cpich RSCP is reported, this
parameter is set to False. If Cpich RSCP is not reported, the
parameter is True.
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2418
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A
2.92 UE Inter-frequency Period

RSCP(UInterRscpPrdMeas)
2.92.1 UE Inter-frequency Period Measurement Configuration
Object ID for CPICH RSCP
Full Name
UE Inter-frequency Period Measurement Configuration Object ID for

CPICH RSCP
Abbreviated Name
UInterRscpPrdMeasId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-2419
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Inter-frequency Period Measurement Configuration for CPICH
RSCP
N/A
N/A

Full Name
Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
2-2420
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

report).
Instance
ZWF21-03-003
Handover Control FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2421
SJ-20141209142030-013|2015-11-12 (R1.3)

measurement
and vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP
N/A
N/A

Full Name
Abbreviated Name
prdRptAmount
Managed Object

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
2-2422
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
ZWF21-03-003
Handover Control FG
1, 2, 4, 8, 16, 32, 64, Infinity
Unit
N/A
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: RLC mode used for measurement result
reporting
Related factors: accuracy of transmission, system capacity
If AM mode is used, an RNC can request a UE for retransmission
after receiving the error SDU label (not continuous). If UM mode
is used, the retransmission is not required. Because signaling is
more important, AM mode is used to provide the reliable signaling
transmission.
The default parameter value is set based on transmission accuracy
Reason
and system capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2423
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

RSCP
N/A
N/A

Full Name
Abbreviated Name
prdRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description
This parameter indicates the time interval at which a UE reports

periodical reports. For periodical reports, the UE periodically reports
measurement results based on this parameter.
Instance
ZWF21-03-003
Handover Control FG
(250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000,
20000, 24000, 28000, 32000, 64000)ms
Unit
ms
Default Value
Inter_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-2424
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: indicator of whether to report the measurement
result based on the measurement quantity pathloss

If the parameter is set to True, the measurement result is reported
based on the measurement quantity pathloss. If the parameter is
set to False, the measurement result is not reported based on the
measurement quantity pathloss.
As an RNC can calculate Pathloss by using Cpich RSCP, (Pathloss
= transmit power - Cpich RSCP), if Cpich RSCP is reported, this
parameter is set to False. If Cpich RSCP is not reported, the
parameter is True.
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

RSCP
N/A
N/A
2.93 Inter-RAT Measurement Profile(URatMeasProfile)

2.93.1 Inter-RAT Measurement Profile Object ID
Full Name
Inter-RAT Measurement Profile Object ID
Abbreviated Name
URatMeasProfileId
Managed Object
Inter-RAT Measurement Profile(URatMeasProfile)
2-2425
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the inter-RAT measurement

profile.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Measurement Configuration->Inter-RAT

Measurement Profile
N/A
N/A
2-2426
SJ-20141209142030-013|2015-11-12 (R1.3)
2.93.2 Inter-Rat Measurement Profile Identity

Full Name
Inter-Rat Measurement Profile Identity
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the profile ID of a set of inter-RAT

measurement parameters. Each cell obtains the inter-RAT
Instance
UTRAN Cell
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
0..99
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: profile ID of a set of inter-RAT measurement
parameters
Reason
planning.
Change Take Effect
No
0
2-2427
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path

Measurement Profile
N/A
N/A

Full Name
Abbreviated Name
intialHoCelSelScene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
UTRAN Cell
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
0: Outdoor Scene
2: Indoor Scene
Unit
N/A
Default Value
Related Parameters
N/A
2-2428
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

0: outdoor scenario
2: indoor scenario
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Measurement Profile
N/A
N/A
2.94 Inter-RAT Measurement Configuration Related to

Traffic Category(URatMeasSrvSpec)
2.94.1 Inter-RAT Measurement Configuration Related to Traffic
Category Object ID
2-2429
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Inter-RAT Measurement Configuration Related to Traffic Category

Object ID
Abbreviated Name
URatMeasSrvSpecId
Managed Object

Category(URatMeasSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
Description

configuration related to traffic categories.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
2-2430
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

Measurement Profile->Inter-RAT Measurement Configuration
Related to Traffic Category
N/A
N/A

Configuration
Full Name

Configuration
Abbreviated Name
srvCategory
Managed Object

Category(URatMeasSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
Description

measurement, which must be used in all services.
Instance
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
2-2431
SJ-20141209142030-013|2015-11-12 (R1.3)

Unit
N/A
Default Value
CRATDefault
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
differentiating handover configurations during inter-RAT

measurement
optimization
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

Related to Traffic Category
N/A
N/A
2-2432
SJ-20141209142030-013|2015-11-12 (R1.3)
2.95 UE Inter-RAT Event Measurement Configuration

for CPICH Ec/No(GSM)(URatEcNoEvMeasforG)
2.95.1 UE Inter-RAT Event Measurement Configuration Object ID
for CPICH Ec/No (GSM)
Full Name
UE Inter-RAT Event Measurement Configuration Object ID for

CPICH Ec/No (GSM)
Abbreviated Name
URatEcNoEvMeasforGId
Managed Object

Ec/No(GSM)(URatEcNoEvMeasforG)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of inter-RAT measurement

configuration of UE events for which the measurement quantity is
CPICH Ec/No (GSM).
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
2-2433
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Related to Traffic Category->UE Inter-RAT Event Measurement
Configuration for CPICH Ec/No(GSM)
N/A
N/A
2.95.2 UTRAN Filter Coefficient

Full Name
UTRAN Filter Coefficient
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

perform L3 filtering on intra-frequency measurement results.
On the UE side, a UE performs L1 intra-frequency measurement
2-2434
SJ-20141209142030-013|2015-11-12 (R1.3)

report).
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
filtering on inter-RAT measurement results

measurement
measurement has on the final inter-RAT measurement results, and
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2435
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A
2.95.3 GSM Filter Coefficient

Full Name
GSM Filter Coefficient
Abbreviated Name
gsmFilterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

perform L3 filtering on GSMRNC measurement results in inter-RAT
measurement.
On the UE side, a UE performs L1 inter-RAT measurement at a fixed
measurement cycle (during which several points are measured.
How L1 filters the measurement result depends on UEs.). After
that, L1 reports the result to L3 at certain time intervals and L3
performs filtering on the latest measurement result and the previous
measurement result. The filtering shall be performed based on the
following formula specified in 3GPP TS 25.331: Fn = (1-a)*Fn-1
+a*Mn, in which:
report).
Instance

2-2436
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2437
SJ-20141209142030-013|2015-11-12 (R1.3)
2.95.4 Inter-RAT Measurement Event Number

Full Name
Inter-RAT Measurement Event Number
Abbreviated Name
eventNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

configured for an inter-RAT measurement configuration number
for a certain purpose.This parameter is related to the method of
determining inter-RAT handover.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
1..MAX_RAT_MEAS_EVENT T
Where MAX_RAT_MEAS_EVENT =4.
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: number of events required to be configured
for an inter-RAT measurement configuration number for a certain

purpose
actual inter-RAT handover, which means that this parameter is set
based on measurement purposes.
2-2438
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.95.5 Inter-RAT Event Identity

Full Name
Inter-RAT Event Identity
Abbreviated Name
eventId
Managed Object

3GPP Name
Inter-RAT event identity
3GPP Reference
TS 25.331
Description
This parameter indicates the ID of the event triggered by inter-RAT

measurement. It is related to the measurement quantity.
MAX_RAT_MEAS_EVENT indicates the maximum number of
inter-RAT measurement events, and its value is 4.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
3a, 3b, 3c, 3d
Unit
N/A
2-2439
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_RAT_MEAS_EVENT]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: ID of the event triggered by inter-RAT
measurement
This parameter indicates inter-RAT events defined in 3GPP
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.95.6 Absolute Threshold of the Quality of UTRAN Cell for 3A

Full Name
Absolute Threshold of the Quality of UTRAN Cell for 3A
Abbreviated Name
thresh
Managed Object

2-2440
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Threshold own system
3GPP Reference
TS 25.331
Description
This parameter indicates the absolute threshold of the UTRAN

cell quality that the UE uses for determination of event 3a. If the
quality of the current system is lower than this threshold minus
hysteresis/2 for a period of time, then the system is considered
to be of poor quality, and it is necessary to perform an inter-RAT
handover quickly. If the quality of the current system is higher than
this threshold plus hysteresis/2 for a period of time, then the system
is considered to be of good quality, and there is no need to perform
an inter-RAT handover.
The range and unit of this parameter is related to the measurement
quantity of the UTRAN cell.
MAX_RAT_MEAS_EVENT is the maximum number of inter-RAT
measurement events, and its value is 4.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG

Unit
dB
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2441
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: delaying event reporting, reducing the average
number of handover times

Related factors: duration of activating compressed mode, average
number of handover times, and handover success rate
The smaller the parameter is, the more difficult it is to trigger event
3A. Otherwise, the larger the parameter is, the easier it is to trigger
event 3A.
In order to avoid system capacity loss caused by the compressed
mode being activated all the time, the UE is expected to hand over to
other systems as soon as possible as long as the compressed mode
for inter-RAT measurement is activated. So it is recommended to
configure the threshold to a larger value.
The default parameter value is set based on the duration of
Reason
activating compressed mode, average number of handover times,

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.95.7 Weight of the UTRAN System for 3A

Full Name
Weight of the UTRAN System for 3A
Abbreviated Name
Managed Object

2-2442
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the weight of the cell with the best quality
in the calculation of the UTRAN system quality (for the 3a event
only). It is used to determine the quality of the UTRAN system in
inter-RAT measurement.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
double[DBS_RR_MAX_RAT_MEAS_EVENT]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: weight of the cell with the best quality in the
calculation of the UTRAN system quality of the currently used carrier

frequency
The default parameter value is set based on the signal quality of a
Reason
cell and the handover success rate.
Change Take Effect
No
2-2443
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.95.8 Absolute Threshold of the Quality of Other RAT for 3A/3B/3C

Full Name
Absolute Threshold of the Quality of Other RAT for 3A/3B/3C
Abbreviated Name
threshSys
Managed Object

3GPP Name
Threshold other system
3GPP Reference
TS 25.331
Description
This parameter indicates the absolute threshold configured for event

3a/3b/3c, used for determining the quality of other RATs. If the
quality of a system plus the cell individual offset is higher than this
threshold plus hysteresis/2 for a period of time, then the system is
considered to be of good quality, and can serve as a target system
for handovers. If the quality of a system plus the cell individual
offset is lower than this threshold minus hysteresis/2 for a period of
time, then the system is considered to be of poor quality, and cannot
serve as a target system for handovers.
quantity of other RATs. The measurement quantity GSM Carrier
RSSI of the GSM system corresponds to CPICH RSCP of the
UTRAN system, so the value range and unit of this parameter
corresponds to CPICH RSCP.
2-2444
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(-140..0)
RSRP: (-140..-44)dBm, step 1dB
Unit
dBm
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

For event 3A/3C, the larger the parameter is, the more difficult it is
to trigger event 3A/3C. Otherwise, the smaller the parameter is, the
easier it is to trigger event 3A/3C.
For event 3B, the smaller the parameter is, the more difficult it is to
trigger event 3B. Otherwise, the larger the parameter is, the easier
it is to trigger event 3B.
1. In order to avoid system capacity loss caused by the compressed
configure the threshold to a smaller value for 2G system.
2. If the quality of the inter-RAT neighboring cell is also poor, hasty
handover will increase the call drop rate and cannot ensure service
quality after handover. Therefore, the threshold cannot be too small.
Reason

2-2445
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.95.9 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

The greater the value of Hysteresis is, the greater the difference
between the threshold to trigger an event and the threshold to end
the event is.
It is related to the measurement quantity and event types.
Instance
ZWF21-03-004
Inter-RAT Mobility
2-2446
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
(0, 0.5..7.5)dB, step 0.5dB
Unit
dB
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

triggering inter-RAT event is, which leads to decreased average
number of handover times and consequently increased call drop
risk. The smaller the parameter value is, the greater the probability
of triggering inter-RAT event is, which leads to increased average
number of handover times and consequently increased error
handover risk.
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2447
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description
This parameter indicates the difference in time when an event is

detected and when it is reported. The event will be triggered and
reported only when it meets all the triggering conditions within the
triggering duration indicated by this parameter after being detected.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
2-2448
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
number of handover times, and avoiding error handover

Related factors: average number of handover times, and handover
success rate, and handover area.
The larger this parameter is, the longer time it takes to trigger the
event, the smaller the average number of handover times, and the
higher the risk of call drop is.
The smaller the parameter is, the larger the average number of
handover times is. And error handover will be caused.
Reason
handover times, handover success rate, and handover area.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

for CPICH RSCP(GSM)(URatRscpEvMeasforG)
for CPICH RSCP (GSM)
2-2449
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name

CPICH RSCP (GSM)
Abbreviated Name
URatRscpEvMeasforGId
Managed Object

RSCP(GSM)(URatRscpEvMeasforG)
3GPP Name
N/A
3GPP Reference
N/A
Description

CPICH RSCP (GSM).
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-2450
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Restricted
OMC Access path

Configuration for CPICH RSCP(GSM)
N/A
N/A

Full Name
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

report).
2-2451
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2452
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
gsmFilterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
+a*Mn, in which:
report).
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
2-2453
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eventNum
Managed Object

2-2454
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
2-2455
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eventId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
3a, 3b, 3c, 3d
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
2-2456
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
measurement
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
thresh
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2457
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG

Unit
dBm
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

event 3A.
2-2458
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
ZWF21-03-004
2-2459
SJ-20141209142030-013|2015-11-12 (R1.3)
Inter-RAT Mobility
Handover Control FG
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

frequency
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2460
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
threshSys
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(-140..0)
Unit
dBm
Default Value
Rat_Default
2-2461
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

2-2462
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.96.9 Hysteresis
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

the event is.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 0.5..7.5)dB, step 0.5dB
Unit
dB
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-2463
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No

handover risk.
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
2-2464
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
trigTime
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2465
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

for CPICH Ec/No(EUTRAN)(URatEcNoEvMeasforE)
for CPICH Ec/No (EUTRAN)
Full Name

CPICH Ec/No (EUTRAN)
Abbreviated Name
URatEcNoEvMeasforEId
Managed Object

Ec/No(EUTRAN)(URatEcNoEvMeasforE)
3GPP Name
N/A
3GPP Reference
N/A
2-2466
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

CPICH Ec/No (EUTRAN).
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration for CPICH Ec/No(EUTRAN)
N/A
N/A
2-2467
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

report).
Instance
ZWF21-03-110
Handover with LTE
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
2-2468
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.97.3 EUtran Filter Coefficient

Full Name
EUtran Filter Coefficient
Abbreviated Name
eUtranFilterCoeff
Managed Object

2-2469
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

perform L3 filtering on EUTRAN measurement results in inter-RAT
measurement.
+a*Mn, in which:
report).
Instance
ZWF21-03-110
Handover with LTE
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2470
SJ-20141209142030-013|2015-11-12 (R1.3)

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eventNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

2-2471
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-110
Handover with LTE
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2472
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
eventId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE
3a, 3b, 3c, 3d
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
measurement
2-2473
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
thresh
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

2-2474
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
ZWF21-03-110
Handover with LTE

Unit
dB
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

event 3A.
Reason

Change Take Effect
No
How to Impact
N/A
2-2475
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
ZWF21-03-110
Handover with LTE
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
2-2476
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

frequency
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
threshSys
Managed Object

2-2477
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE
(-140..0)
Unit
dBm
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2478
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.97.9 Hysteresis
2-2479
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

the event is.
Instance
ZWF21-03-110
Handover with LTE
(0, 0.5..7.5)dB, step 0.5dB
Unit
dB
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2480
SJ-20141209142030-013|2015-11-12 (R1.3)

handover risk.
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
2-2481
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2482
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

for CPICH RSCP(EUTRAN)(URatRscpEvMeasforE)
for CPICH RSCP (EUTRAN)
Full Name

CPICH RSCP (EUTRAN)
Abbreviated Name
URatRscpEvMeasforEId
Managed Object

RSCP(EUTRAN)(URatRscpEvMeasforE)
3GPP Name
N/A
3GPP Reference
N/A
Description

CPICH RSCP (EUTRAN).
2-2483
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration for CPICH RSCP(EUTRAN)
N/A
N/A

2-2484
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

report).
Instance
ZWF21-03-110
Handover with LTE
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-2485
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eUtranFilterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
2-2486
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

measurement.
+a*Mn, in which:
report).
Instance
ZWF21-03-110
Handover with LTE
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2487
SJ-20141209142030-013|2015-11-12 (R1.3)

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
eventNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

configured for an inter-RAT measurement configuration number for
a certain purpose.
2-2488
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-110
Handover with LTE
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

purpose
Reason
purposes.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
2-2489
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
eventId
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE
3a, 3b, 3c, 3d
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
measurement
2-2490
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
thresh
Managed Object

3GPP Name
3GPP Reference
TS 25.331
Description

2-2491
SJ-20141209142030-013|2015-11-12 (R1.3)

Instance
ZWF21-03-110
Handover with LTE

Unit
dBm
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

event 3A.
Reason

Change Take Effect
No
How to Impact
N/A
2-2492
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
ZWF21-03-110
Handover with LTE
(0.0..2.0), step 0.1
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
2-2493
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

frequency
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
threshSys
Managed Object

2-2494
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE
(-140..0)
Unit
dBm
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2495
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.98.9 Hysteresis
2-2496
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Hysteresis
Abbreviated Name
hysteresis
Managed Object

3GPP Name
Hysteresis
3GPP Reference
TS 25.331
Description

the event is.
Instance
ZWF21-03-110
Handover with LTE
(0, 0.5..7.5)dB, step 0.5dB
Unit
dB
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2497
SJ-20141209142030-013|2015-11-12 (R1.3)

handover risk.
Reason

Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Time to Trigger
Abbreviated Name
trigTime
2-2498
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
Time to trigger
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-110
Handover with LTE
(0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280,
2560, 5000)ms
Unit
ms
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No

2-2499
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.99 Inter-RAT Measurement Configuration Unrelated

to Traffic Category(URatMeasNoSrvSpec)
2.99.1 Inter-RAT Measurement Configuration Unrelated to Traffic
Category Object ID
Full Name
Inter-RAT Measurement Configuration Unrelated to Traffic Category

Object ID
Abbreviated Name
URatMeasNoSrvSpecId
Managed Object
Inter-RAT Measurement Configuration Unrelated to Traffic

Category(URatMeasNoSrvSpec)
3GPP Name
N/A
3GPP Reference
N/A
Description

configuration unrelated to traffic categories.
Instance
RNC
2-2500
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Unrelated to Traffic Category
N/A
N/A
2-2501
SJ-20141209142030-013|2015-11-12 (R1.3)
2.100 UE Inter-RAT Period Measurement Configuration

for CPICH Ec/No(URatEcNoPrdMeas)
2.100.1 UE Inter-RAT Period Measurement Configuration Object ID
for CPICH Ec/No
Full Name
UE Inter-RAT Period Measurement Configuration Object ID for

CPICH Ec/No
Abbreviated Name
URatEcNoPrdMeasId
Managed Object

Ec/No(URatEcNoPrdMeas)
3GPP Name
N/A
3GPP Reference
N/A
Description

configuration of UE periods for which the measurement quantity is
CPICH Ec/No.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
2-2502
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Unrelated to Traffic Category->UE Inter-RAT Period Measurement
Configuration for CPICH Ec/No
N/A
N/A

Full Name
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

2-2503
SJ-20141209142030-013|2015-11-12 (R1.3)

report).
Instance

ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
2-2504
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
gsmFilterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
+a*Mn, in which:
report).
2-2505
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2506
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
eUtranFilterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
+a*Mn, in which:
report).
Instance
ZWF21-03-110
Handover with LTE
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
2-2507
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptAmount
Managed Object

2-2508
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description

Instance
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
1, 2, 4, 8, 16, 32, 64, Infinity
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Invalid parameter
Parameter function: number of times that periodical reports are

reported
The greater the parameter value is, the more accurate the handover
determination is, the higher the handover success rate is, but the
more the system resource is consumed. The smaller the parameter
value is, the less the number of times for reporting is, the higher the
call drop rate is, and the lower the handover success rate is.
Reason
rate.
Change Take Effect
No
2-2509
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description
This parameter indicates the interval at which periodical reports

are reported.
Instance
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
(250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000,
20000, 24000, 28000, 32000, 64000)ms
Unit
ms
Default Value
Rat_Default
Related Parameters
N/A
2-2510
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Invalid parameter
Parameter function: interval between periodical reports

The larger the parameter is, the smaller the number of reports is,
the higher the probability of call drop is, and the lower the handover
success rate is. The smaller the parameter is, the larger the number
of reports is, and the lower the handover success rate is. However,
more system resources will be occupied.
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.101 UE Inter-RAT Period Measurement Configuration

for CPICH RSCP(URatRscpPrdMeas)
2.101.1 UE Inter-RAT Period Measurement Configuration Object ID
for CPICH RSCP
2-2511
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
UE Inter-RAT Period Measurement Configuration Object ID for

CPICH RSCP
Abbreviated Name
URatRscpPrdMeasId
Managed Object

RSCP(URatRscpPrdMeas)
3GPP Name
N/A
3GPP Reference
N/A
Description

configuration of UE periods for which the measurement quantity is
CPICH RSCP.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-2512
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Restricted
OMC Access path

Configuration for CPICH RSCP
N/A
N/A

Full Name
Abbreviated Name
filterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

report).
2-2513
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2514
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
gsmFilterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
+a*Mn, in which:
report).
Instance

2-2515
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2516
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
eUtranFilterCoeff
Managed Object

3GPP Name
Filter coefficient
3GPP Reference
TS 25.331
Description

measurement.
+a*Mn, in which:
report).
Instance
ZWF21-03-110
Handover with LTE
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
2-2517
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

measurement
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptAmount
Managed Object

2-2518
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Amount of reporting
3GPP Reference
TS 25.331
Description

determine whether to report. If the UE detects that the number
of times of event reports exceeds the parameter value, it stops
reporting measurement reports.
Instance
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
1, 2, 4, 8, 16, 32, 64, Infinity
Unit
N/A
Default Value
Rat_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Invalid parameter
Parameter function: number of periodical reports

The larger the parameter is, the more precise the handover
determination is, and the higher the handover success rate is.
However, more system resources will be occupied. The smaller the
parameter is, the smaller the number of reports is, the higher the
probability of call drop is, and the lower the handover success rate is.
Reason
rate.
Change Take Effect
No
2-2519
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
prdRptInterval
Managed Object

3GPP Name
Reporting interval
3GPP Reference
TS 25.331
Description
This parameter indicates the interval at which periodical reports

are reported.
Instance
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
(250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000,
20000, 24000, 28000, 32000, 64000)ms
Unit
ms
Default Value
Rat_Default
Related Parameters
N/A
2-2520
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Invalid parameter
Parameter function: interval between periodical reports

The larger the parameter is, the smaller the number of reports is,
the higher the probability of call drop is, and the lower the handover
success rate is. The smaller the parameter is, the larger the number
of reports is, and the lower the handover success rate is. However,
more system resources will be occupied.
Reason
rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.102 NodeB Common Measurement

Profile(UNbComMeasProfile)
2.102.1 NodeB Common Measurement Profile Object ID
2-2521
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
NodeB Common Measurement Profile Object ID
Abbreviated Name
UNbComMeasProfileId
Managed Object
NodeB Common Measurement Profile(UNbComMeasProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the Node B common

Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>Service Configuration->Measurement Configuration->NodeB

Common Measurement Profile
2-2522
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.102.2 Profile Id
Full Name
Profile Id
Abbreviated Name
profileId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the profile ID for NodeB common

measurement. Each profile corresponds to one set of NodeB
common measurement parameters. Each cell gets the set of
NodeB common measurement parameters through the LoadScene
parameter.
Instance
RNC
ZWF21-20-005
Common Measurement Controlling
Node Management FG
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: profile ID for NodeB common measurement.
N/A
Reason
2-2523
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A

Full Name
Initial Load Scene
Abbreviated Name
intialloadscene
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Initial Load Scene applicable to the

common measurement parameters, 0: Normal Load Cell; 1: High
Load Cell.
Instance
RNC
ZWF21-20-005
Node Management FG
0: Normal Load Cell

1: High Load Cell
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
2-2524
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: Initial Load Scene applicable to the common
measurement parameters. 0: Normal Load Cell; 1: High Load Cell.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

N/A
N/A
2.103 NodeB Common Measurement

Configuration(UNbComMeas)
2.103.1 NodeB Common Measurement Configuration Object ID
Full Name
NodeB Common Measurement Configuration Object ID
Abbreviated Name
UNbComMeasId
Managed Object
NodeB Common Measurement Configuration(UNbComMeas)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the Node B common

measurement configuration.
2-2525
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Common Measurement Profile->NodeB Common Measurement
Configuration
N/A
N/A
2.103.2 Function of Configuration Parameters

Full Name
Function of Configuration Parameters
2-2526
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
nbCMCfgNote
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the usage and function of parameters

indicated by the NodeB common measurement configuration index.
Instance
UTRAN Cell
ZWF21-20-005
Node Management FG
0: Period Report Parameters for RTWP

1: Period Report Parameters for TCP
4: Period Report Parameters for HS-DSCH Required Power
5: Period Report Parameters for NotusedHS-DSCH_TCP
6: Period NodeB Common Measurement Report Parameters for
Received Scheduled E-DCH Power Share
7: Period NodeB Common Measurement Reprot Parameters for
R99 RACH Acknowledged PRACH Preambles
8: Period NodeB Common Measurement Reprot Parameters for
Common E-DCH RACH Acknowledged PRACH Preambles
Unit
N/A
Default Value
NbCom_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: measurement type and report method of
the configuration parameters for the common measurement

configuration index, depending on the common measurement
purpose (only one value for a certain measurement purpose).
Related factors: common measurement purpose.
Adjustment suggestion: This parameter is decided by the common
measurement purpose (only one value for a certain measurement
purpose), and is not adjustable.
2-2527
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration
N/A
N/A
2.103.3 Common Measurement Object Type

Full Name
Common Measurement Object Type
Abbreviated Name
measObjType
Managed Object

3GPP Name
CHOICE Common Measurement Object Type
3GPP Reference
TS 25.433
Description
This parameter indicates the type of object on which the

measurement is performed, which can be cell or RACH.
Instance
UTRAN Cell
ZWF21-20-005
Node Management FG
1: Cell
Unit
N/A
Default Value
NbCom_Default
Related Parameters
N/A
2-2528
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: common measurement object type, depending
on the common measurement purpose (only one value for a certain

measurement purpose).
Adjustment suggestion: This parameter is decided by the common
measurement purpose (only one value for a certain measurement
purpose), and is not adjustable.
This parameter is decided by the common measurement purpose
Reason
(only one value for a certain measurement purpose), and is not

adjustable.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration
N/A
N/A
2.103.4 Common Measurement Type

Full Name
Common Measurement Type
Abbreviated Name
comMeasType
Managed Object

3GPP Name
Common Measurement Type

2-2529
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.433
Description
This parameter indicates the type of measurement that is performed

by NodeB. It is decided by the common measurement purpose
(only one value for a certain measurement purpose). For more
information, refer to the "Value Range and Step" of this parameter.
Instance
UTRAN Cell
ZWF21-20-005
Node Management FG
0: Received Total Wide Band Power

1: Transmitted Carrier Power
2: Acknowledged PRACH Preambles
6: reserved
8: Transmitted Carrier Power of All Codes not Used for HS-PDSCH
or HS-SCCH Transmission
9: HS-DSCH Required Power
20: Received Scheduled E-DCH Power Share
Unit
N/A
Default Value
NbCom_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: common measurement type, depending on
the common measurement purpose (only one value for a certain

measurement purpose)
Related factors: common measurement purpose
Reason

adjustable.
Change Take Effect
No
2-2530
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration
N/A
N/A
2.103.5 Measurement Filter Coefficient

Full Name
Measurement Filter Coefficient
Abbreviated Name
measFilterCoeff
Managed Object

3GPP Name
3GPP Reference
TS 25.433
Description
This parameter indicates the measurement filter coefficient. The

smaller the parameter is, the less widely the common measurement
report value fluctuates. The larger the parameter is, the more
real-time the common measurement report value is.
Instance
UTRAN Cell
ZWF21-20-005
Node Management FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
Default Value
NbCom_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-2531
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Parameter function: L3 filter coefficient.
Related factors: smoothness and timeliness of common

measurement report value.
Effect: The smaller the parameter is, the less widely the common
measurement report value fluctuates. The larger the parameter is,
the more real-time the common measurement report value is.
The default parameter value is set based on the smoothness and
Reason
timeliness of common measurement report values.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.103.6 Report Characteristics

Full Name
Report Characteristics
Abbreviated Name
rptType
Managed Object

3GPP Name
3GPP Reference
TS 25.433
Description
This parameter indicates the common measurement report type

(periodical report or on-demand report).
Instance
UTRAN Cell
ZWF21-20-005
2-2532
SJ-20141209142030-013|2015-11-12 (R1.3)
Node Management FG
2: Periodic
Unit
N/A
Default Value
NbCom_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: common measurement report type (periodical
report or on-demand report).

Effect: This parameter is decided by the common measurement
purpose (only one value for a certain measurement purpose).
Reason

adjustable.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration
N/A
N/A
2-2533
SJ-20141209142030-013|2015-11-12 (R1.3)
2.103.7 Choice Report Periodicity Scale

Full Name
Choice Report Periodicity Scale
Abbreviated Name
rptPrdUnit
Managed Object

3GPP Name
CHOICE Report Periodicity Scale
3GPP Reference
TS 25.433
Description
This parameter indicates the unit of the common measurement

report period, used in conjunction with RptPrd to determine the
interval at which the NodeB sends measurement reports. These two
parameters are only applicable to periodical report and event E/F.
Instance
UTRAN Cell
ZWF21-20-005
Node Management FG
1: ms
2: min
Unit
N/A
Default Value
NbCom_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: unit of the common measurement report
period (milliseconds or minutes), used in conjunction with RptPrd to

determine the interval of common measurement reports.
Related factors: accuracy requirement for common measurement,
Iub load.
Effect: The larger the parameter is, the larger the Iub load is, and the
higher the bandwidth occupied by lub is. The smaller the parameter
is, the more real-time the measurement report is.
2-2534
SJ-20141209142030-013|2015-11-12 (R1.3)
To guarantee the measurement precision, the unit is ms.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.103.8 Report Period

Full Name
Report Period
Abbreviated Name
rptPrd
Managed Object

3GPP Name
Report Periodicity Value
3GPP Reference
TS 25.433
Description
This parameter indicates the report period. It is used in conjunction

with RptPrdUnit to determine the interval at which the NodeB sends
measurement reports. These two parameters are only applicable to
periodical report and event E/F.
Instance
UTRAN Cell
ZWF21-20-005
Node Management FG
RptPrdUnitms: (10..60000)ms, step 10ms

RptPrdUnitmin: (1..60)min, step 1min
Unit
ms or min
Default Value
NbCom_Default
2-2535
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: common measurement report period, used in
conjunction with RptPrdUnit to determine the interval of common

measurement reports.
Related factors: accuracy requirement for common measurement,
Iub load.
Effect: The larger the parameter is, the larger the Iub load is, and the
higher the bandwidth occupied by lub is. The smaller the parameter
is, the more real-time the measurement report is.
The default parameter value is set based on the common
Reason
measurement accuracy requirement and lub load.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2-2536
SJ-20141209142030-013|2015-11-12 (R1.3)
2.104 NodeB Dedicated Measurement

Profile(UNbDedMeasProfile)
2.104.1 NodeB Dedicated Measurement Profile Object ID
Full Name
NodeB Dedicated Measurement Profile Object ID
Abbreviated Name
UNbDedMeasProfileId
Managed Object
NodeB Dedicated Measurement Profile(UNbDedMeasProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the Node B dedicated

Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
2-2537
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Restricted
OMC Access path

Dedicated Measurement Profile
N/A
N/A
2.104.2 Profile Id
Full Name
Profile Id
Abbreviated Name
profileId
Managed Object
NodeB Dedicated Measurement Profile(UNbDedMeasProfile)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Profile Id for the NodeB dedicated

measurement. Each profile corresponds one setting of NodeB
dedicated measurement parameters.
Instance
RNC
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-10-004

LCS Classified Zones

Power Control FG
Power control algorithm enhancement FG
Location Service FG
0..9
2-2538
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
This parameter indicates the Id of the dedicated measurement
Profile.
Basic index
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Restricted
OMC Access path

Dedicated Measurement Profile
N/A
N/A
2.105 NodeB Dedicated Measurement

Configuration(UNbDedMeas)
2.105.1 NodeB Dedicated Measurement Configuration Object ID
Full Name
NodeB Dedicated Measurement Configuration Object ID
Abbreviated Name
UNbDedMeasId
Managed Object
NodeB Dedicated Measurement Configuration(UNbDedMeas)
2-2539
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the Node B dedicated

measurement configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Dedicated Measurement Profile->NodeB Dedicated Measurement
Configuration
N/A
N/A
2-2540
SJ-20141209142030-013|2015-11-12 (R1.3)
2.105.2 Function of configuration Parameters

Full Name
Function of configuration Parameters
Abbreviated Name
nbDMCfgNote
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the function, purpose etc. of the dedicated

measurement parameters indicated by the configuration index.
Instance
RNC
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-04-008
ZWF21-10-004


Power Control FG
Location Service FG
0: Period Report Parameters for TCP in Power Balance

1: Period Report Parameters for TCP in AMR or DASF-PS or
Handover Control
2: Event A Report Parameters for TCP in DASF-PS
3: Event B Report Parameters for TCP in DASF-PS
4: Period Report Parameters for RTT in LCS
5: Event E Report Parameters for SIR Error in Outer Loop Power
Control
6: Event F Report Parameters for SIR Error in Outer Loop Power
Control
7: Event A Report Parameters for TCP in AMR
8: Event B Report Parameters for TCP in AMR
2-2541
SJ-20141209142030-013|2015-11-12 (R1.3)
9: Event A Report Parameters for TCP in Handover Control

10: Event B Report Parameters for TCP in Handover Control
Unit
N/A
Default Value
0: Period Report Parameters for TCP in Power Balance

1: Period Report Parameters for TCP in AMR or DASF-PS or
Handover Control
2: Event A Report Parameters for TCP in DASF-PS
3: Event B Report Parameters for TCP in DASF-PS
4: Period Report Parameters for RTT in LCS
5: Event E Report Parameters for SIR Error in Outer Loop Power
Control
6: Event F Report Parameters for SIR Error in Outer Loop Power
Control
7: Event A Report Parameters 2 for TCP in AMR
8: Event B Report Parameters 2 for TCP in AMR
9: Event A Report Parameters for TCP in Handover Control
10: Event B Report Parameters for TCP in Handover Control
Related Parameters
dedMeasType, rptType
nbDMCfgNote and dedMeasType, rptType must satisfy the following
Parameters
restriction:
1. When nbDMCfgNote=0 (Period Report Parameters for TCP in
Power Balance), dedMeasType must be 2 (TCP), rptType must be 2
(Periodic);
2. When nbDMCfgNote is 1 (Period Report Parameters for TCP in
AMR or DASF-PS), dedMeasType muste be 2 (TCP), rptType must
be 2 (Periodic);
3. When nbDMCfgNote is 2 (Event A Report Parameters for TCP
in DASF-PS), dedMeasType muste be 2 (TCP), rptType must be 3
(Event A);
4. When nbDMCfgNote is 3 (Event B Report Parameters for TCP
in DASF-PS), dedMeasType must be 2 (TCP), rptType must be 4
(Event B);
5. When nbDMCfgNote is 4 (Period Report Parameters for RTT in
LCS), dedMeasType must be 5 (RTT), rptType must be 2 (Periodic);
6. When nbDMCfgNote is 5 (Event E Report Parameters for SIR
Error in Threshold Power Control), dedMeasType must be 1 (SIR
Error), rptType must be 7 (Event E);
7. When nbDMCfgNote is 6 (Event F Report Parameters for SIR
Error in Threshold Power Control), dedMeasType muste be 1 (SIR
Error), rptType muste be 8 (Event F);
8. When nbDMCfgNote is 7 (Event A Report Parameters for TCP in
AMR), dedMeasType must be 2 (TCP), rptType muste be 3(Event
A);
2-2542
SJ-20141209142030-013|2015-11-12 (R1.3)
9. When nbDMCfgNote is 8 (Event B Report Parameters for TCP in

AMR), dedMeasType must be 2 (TCP), rptType must be 4 (Event B).
10.When nbDMCfgNote is 9 (Event A Report Parameters for TCP in
Handover Control), dedMeasType must be 2 (TCP), rptType must
be 3 (Event A);
in Handover Control), dedMeasType must be 2 (TCP), rptType must
be 4 (Event B).
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the function, purpose etc. of the
dedicated measurement parameters indicated by the configuration

index.There are following usages: Period Report Parameters for
TCP in Power Balance, Period Report Parameters for TCP in AMR
or DASF-PS or Handover Control, Event A Report Parameters
1 for TCP in DASF-PS, Event B Report Parameters 1 for TCP
in DASF-PS, Period Report Parameters for RTT in LCS, Event E
Report Parameters for SIR Error in Outer Loop Power Control,
Event F Report Parameters for SIR Error in Outer Loop Power
Control, Event A Report Parameters for TCP in AMR, Event B
Report Parameters for TCP in AMR, Event A Report Parameters for
TCP in Handover Control, Event B Report Parameters for TCP in
Handover Control.
Configuration Rule: According to the corresponding function of the
dedicated measurement.
According to the corresponding function of the dedicated
Reason
measurement.
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Configuration
N/A
2-2543
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.105.3 Dedicated Measurement Type

Full Name
Dedicated Measurement Type
Abbreviated Name
dedMeasType
Managed Object

3GPP Name
Dedicated Measurement Type
3GPP Reference
TS 25.433
Description
This parameter indicates the type of dedicated measurement to

be executed by Node B
Instance
RNC
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-04-008
ZWF21-10-004


Power Control FG
Location Service FG
1: SIR Error
2: Transmitted Code Power
5: Round Trip Time
Unit
N/A
2-2544
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Period Report Parameters for TCP in Power Balance: Transmitted

Code Power
Period Report Parameters for TCP in AMR or DASF-PS or Handover
Control: Transmitted Code Power
Event A Report Parameters for TCP in DASF-PS: Transmitted Code
Power
Event B Report Parameters for TCP in DASF-PS: Transmitted Code
Power
Period Report Parameters for RTT in LCS: Round Trip Time
Event E Report Parameters for SIR Error in Outer Loop Power
Control: SIR Error
Control: SIR Error
Event A Report Parameters for TCP in AMR: Transmitted Code
Power
Event B Report Parameters for TCP in AMR: Transmitted Code
Power
Event A Report Parameters for TCP in Handover Control:
Transmitted Code Power
Event B Report Parameters for TCP in Handover Control:
Transmitted Code Power
Related Parameters
nbDMCfgNote , rptType
Parameters
restriction:
(Periodic);
be 2 (Periodic);
(Event A);
(Event B);
2-2545
SJ-20141209142030-013|2015-11-12 (R1.3)

A);
be 3 (Event A);
be 4 (Event B).
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the type of dedicated
measurement to be executed by Node B.

Configuration Rule: Dedicated measurement type should be chose
according to the usage of the dedicated measurement.
Dedicated measurement type should be chose according to the
Reason
usage of the dedicated measurement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.4 Measurement Filter Coefficient

Full Name

2-2546
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
measFilterCoeff
Managed Object

3GPP Name
3GPP Reference
TS 25.433
Description
This parameter indicates how filtering of the measurement values

shall be performed before measurement event evaluation and
reporting.
The averaging shall be performed according to the following formula.
F(n) =(1-a)* F(n-1) + a*M(n)
The variables in the formula are defined as follows:
F(n) is the updated filtered measurement result
F(n-1) is the old filtered measurement result
Mn is the latest received measurement result from physical layer
measurements
a = (1/2)^ (k/2) , where k is the Measurement Filter Coefficient. If
k=1 theres no filtering)
In order to initialise the averaging filter, F(0) is set to M(1) when
the first measurement result from the physical layer measurement
is received.
Instance
RNC
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-04-008
ZWF21-10-004


Power Control FG
Location Service FG
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19)
Unit
N/A
2-2547
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
All measurements: 2
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates how filtering of the measurement
values shall be performed before measurement event evaluation

and reporting.
Configuration Rule: Considering the filtering effect and the
timeliness of the measurement report.
The larger the value, the less influence current measurement can
have on the final result, the less the value, the more influence
current measurement can have on the final result.
Consider the filtering effect and the timeliness of the measurement
Reason
report. Default is 2 means current measurement and previous

measurement has the weight of 50% separately.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.5 Report Characteristics

Full Name
Abbreviated Name
rptType
2-2548
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
3GPP Reference
TS 25.433
Description
This parameter indicates the report characteristics of measurement

results, which can be on demand, periodic or by triggering all kinds
of: events.
Instance
RNC
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-04-008
ZWF21-10-004


Power Control FG
Location Service FG
1: On Demand
2: Periodic
3: Event A
4: Event B
5: Event C
6: Event D
7: Event E
8: Event F
Unit
N/A
2-2549
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Period Report Parameters for TCP in Power Balance: Periodic

Control: Periodic
Event A Report Parameters for TCP in AMR or DASF-PS: Event A
Event B Report Parameters for TCP in AMR or DASF-PS: Event B
Period Report Parameters for RTT in LCS: Periodic
Event E Report Parameters for SIR Error in Outer Loop Power
Control: Event E
Control: Event F
Event A Report Parameters for TCP in AMR: Event A
Event B Report Parameters for TCP in AMR: Event B
Event A Report Parameters for TCP in Handover Control: Event A
Event B Report Parameters for TCP in Handover Control: Event B
Related Parameters
nbDMCfgNote, dedMeasType
Parameters
restriction:
(Periodic);
be 2 (Periodic);
(Event A);
(Event B);
A);
2-2550
SJ-20141209142030-013|2015-11-12 (R1.3)

be 3 (Event A);
be 4 (Event B).
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the report characteristics of
measurement results, which can be on demand, periodic or by

triggering all kinds of events.
Configuration Rule: according to the measurement type and event
of the dedicated measurement.
According to the measurement type and event of the dedicated
Reason
measurement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.6 Measurement Threshold 1 of Event E/F for SIR Error

Full Name
Measurement Threshold 1 of Event E/F for SIR Error
Abbreviated Name
evtEfSirEThrd1
Managed Object

2-2551
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
Measurement Threshold 1
3GPP Reference
TS 25.433
Description
This parameter indicates the threshold 1 used for triggering event

E, F for SIR Error measurement. And EvtEfSirEThrd2 indicates
the threshold 2 used for triggering event E, F for SIR Error
measurement. EvtEfSirEThrd1 and EvtEfSirEThrd2 are used
together to determine SIR error event state of the radio link as the
following: E1 state: SIRerror > EvtEfSirEThrd1 corresponding to E
event, or when RL is in E1 state and SIRerror >= EvtEfSirEThrd2
corresponding to E event; E2 state: SIRerror < EvtEfSirEThrd2
corresponding to E event; F1 state: SIRerror < EvtEfSirEThrd1
corresponding to F event or RL is in F1 state and SIRerror <=
EvtEfSirEThrd2 corresponding to F event; F2 state: SIRerror
>EvtEfSirEThrd2 corresponding to F event.
Instance
RNC
ZWF21-04-004

(-31..31)dB, step 0.5dB
Unit
dB
Default Value
1. Event E Report Parameters for SIR Error in Outer Loop Power

Control: 4dB
2. Event F Report Parameters for SIR Error in Outer Loop Power
Control: -4dB
3. Other measurements: -
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
2-2552
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the threshold 1 used for
triggering event E, F for SIR Error measurement.

Configuration Rule: Considering whether it can correctly and timely
reflects the condition when SIR cannot converge to the SIRtarget
because of deterioration of radio condition.
The less of the absolute value of the parameter, the more easier
for event E and F of SIRerror to report. But if it is too small, it will
influence the normal OLPC so as to influence service quality or
system capability finally.
The more of the absolute value of the parameter, the more harder
for event E and F of SIRerror to report. But if it is too large, it will
influence the SIR convergence speed when radio condition recovers
SIR has converges to SIRerror so as to influence service quality or
system capability finally.
Considering whether it can correctly and timely reflects the condition
Reason
when SIR cannot converge to the SIRtarget because of deterioration

of radio condition.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.7 Downlink Rate Level Threshold used for D-TCP

Measurement in DASF-PS
Full Name
Downlink Rate Level Threshold used for D-TCP Measurement in

DASF-PS
Abbreviated Name
dlRateLevel
Managed Object
2-2553
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink rate level threshold, In D-TCP

based PS DRBC, the thresholds of D-TCP measurement event A/B
are got based on the rate level of the service.
Instance
RNC
ZWF21-04-004
NodeB Management FG
Unit
kbps
Default Value
NbDMCfgNote =2 or 3 (Event A/B Report Parameters for TCP in

DASF-PS): [64, 128] kbps
Other measurements: need not be configured.
Related Parameters
N/A
dlRateLevel [0]< dlRateLevel [1]
Parameters
Data Type
long[DBS_RR_MAX_NUM_DL_RATE_LEVEL_FOR_DEDMEAS-1]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates the downlink rate level threshold, In D-TCP
based PS DRBC, the thresholds of D-TCP measurement event A/B

are based on the rate level of the service. The threshold of the
TCP measurement event relative to the maximum transmit power
corresponding to the same rate level have the same value. This
parameter decides the downlink rate level.
Can be adjusted according to the actual requirement.
Reason
Change Take Effect
No
How to Impact
N/A
2-2554
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.8 Measurement Threshold of Event A/B for Transmitted Code

Power
Full Name
Measurement Threshold of Event A/B for Transmitted Code Power
Abbreviated Name
evtAbTcpThrd
Managed Object

3GPP Name
Measurement Threshold;
3GPP Reference
TS 25.433
Description
This parameter indicates the power offset of the DPCH maximum

DL power, which defines which threshold that shall trigger event A,
B for transmitted carrier power measurement.
In PS DRBC, this threshold is related to the service rate as following:
Rate Level PS Service Rate (R) Threshold of Event A/B
Level 1 R<= DlRateLevel[0] EvtAbTcpThrd [0]
Level 2 DlRateLevel[0]<R<= DlRateLevel[1] EvtAbTcpThrd [1]
Level 3 R>DlRateLevel[1] EvtAbTcpThrd [2]
Other case, the threshold and service rate independent, and the
threshold is EvtAbTcpThrd [0].
Instance
RNC
ZWF21-04-005
ZWF21-03-012
ZWF21-04-004

2-2555
SJ-20141209142030-013|2015-11-12 (R1.3)

(-50..0)dB, step 0.1dB
Unit
dB
Default Value
1. NbDMCfgNote =2 (Event A Report Parameters for TCP in

DASF-PS): [-0.4dB -0.4dB -0.4dB];
2. NbDMCfgNote =3 (Event B Report Parameters for TCP in
DASF-PS): [-1.6dB -1.6dB -1.6dB];
3. NbDMCfgNote =7 (Event A Report Parameters for TCP in AMR):
[-0.4dB - -];
4. NbDMCfgNote =8 (Event B Report Parameters for TCP in AMR):
[-1.6dB - -];
5. NbDMCfgNote =9 (Event A Report Parameters for TCP in
Handover Control): [-0.4dB - -];
6. NbDMCfgNote =10 (Event B Report Parameters for TCP in
Handover Control): [-1.6dB - -];
7. Other measurements: need not be configured.
Related Parameters
N/A
N/A
Parameters
Data Type
double[DBS_RR_MAX_NUM_DL_RATE_LEVEL_FOR_DEDMEAS]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the power offset of the DPCH
maximum DL power, which defines which threshold that shall trigger

event A, B for transmitted carrier power measurement.
Configuration Rule: Considering the timeliness of the A/B event
which triggers TCP measurement, and avoiding the ping-pong of the
A/B event in order to satisfy the requirement of the service quality
and system capability.
When the parameter is used for the threshold of A event, the
more of the parameter, the harder for A event to be triggered, the
more harder to trigger service rate downgrading. Too large of the
parameter will guarantee good service quality but system capability
will be influenced.
When the parameter is used for the threshold of B event, the less
of the parameter, the harder for B event to be triggered, the harder
to trigger service rate upgrading. Too small of the parameter will
2-2556
SJ-20141209142030-013|2015-11-12 (R1.3)
influence system capability because it is difficult to be upgraded

after the service rate is downgraded.
Considering the timeliness of the A/B event which triggers TCP
Reason
measurement, and avoiding the ping-pong of the A/B event in

order to satisfy the requirement of the service quality and system
capability.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.9 Measurement Threshold 2 of Event E/F for SIR Error

Full Name
Measurement Threshold 2 of Event E/F for SIR Error
Abbreviated Name
evtEfSirEThrd2
Managed Object

3GPP Name
Measurement Threshold 2
3GPP Reference
TS 25.433
Description
This parameter indicates the threshold 2 used for triggering event

E, F for SIR Error measurement. And EvtEfSirEThrd1 indicates
the threshold 1 used for triggering event E, F for SIR Error
measurement. EvtEfSirEThrd1 and EvtEfSirEThrd2 are used
together to determine SIR error event state of the radio link as the
following: E1 state: SIRerror > EvtEfSirEThrd1 corresponding to E
event, or when RL is in E1 state and SIRerror >= EvtEfSirEThrd2
corresponding to E event; E2 state: SIRerror < EvtEfSirEThrd2
corresponding to E event; F1 state: SIRerror < EvtEfSirEThrd1
corresponding to F event or RL is in F1 state and SIRerror <=
2-2557
SJ-20141209142030-013|2015-11-12 (R1.3)
EvtEfSirEThrd2 corresponding to F event; F2 state: SIRerror

>EvtEfSirEThrd2 corresponding to F event.
Instance
RNC
ZWF21-04-004

(-31..31)dB, step 0.5dB
Unit
dB
Default Value

Control: 1dB
Control: -1dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the threshold 2 used for
triggering event E, F for SIR Error measurement.

Configuration Rule: Considering whether it can correctly and timely
reflects the condition when SIR cannot converge to the SIRtarget
because of deterioration of radio condition.
The less of the absolute value of the parameter, the harder for event
E and F of SIRerror to report. But if it is too small, when SIR can
converge to the SIRtarget normally, SIRtarget keeps fixedly so as
influencing service quality or system capability finally.
The more of the absolute value of the parameter, the more easily for
event E and F of SIRerror to report. But if it is too large, when SIR
can converge to the SIRtarget normally, SIRtarget keeps rising so
as to influence service quality or system capability finally.
Considering whether it can correctly and timely reflects the condition
Reason
when SIR cannot converge to the SIRtarget because of deterioration

of radio condition.
Change Take Effect
No
2-2558
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.10 Measurement Change Time/Measurement Hysteresis Time

Full Name
Measurement Change Time/Measurement Hysteresis Time
Abbreviated Name
evtAbcdefTime
Managed Object

3GPP Name
Measurement Hysteresis Time; Measurement Change Time
3GPP Reference
TS 25.433
Description
For event A/B/E/F, this parameter is measurement hysteresis time

and the measurement hysteresis time provides the duration during
which a reporting criterion has to be fulfilled for the Measurement
Reporting procedure to be triggered.
For event C/D, this parameter is change time. and the change time
is the time the measurement entity shall rise on (in ms), in order to
trigger a measurement report.
Instance
RNC
ZWF21-04-005
ZWF21-04-004


(10..60000)ms, step 10ms
2-2559
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
ms
Default Value
1. Event A Report Parameters 1 for TCP in DASF-PS: 100ms

2. Event B Report Parameters 1 for TCP in DASF-PS: 100ms
Control: 200ms
Control: 200ms
5. Event A Report Parameters for TCP in AMR: 100ms
6. Event B Report Parameters for TCP in AMR: 100ms
7. Event A Report Parameters for TCP in Handover Control: 100ms
8. Event B Report Parameters for TCP in Handover Control: 100ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is measurement hysteresis time /change time.
Configuration Rule: according to the measurement type and event

of the dedicated measurement.
The larger this parameter is, the more difficult to trigger the
measurement event.
Default value is decided according to the measurement type and
Reason
event of the dedicated measurement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2-2560
SJ-20141209142030-013|2015-11-12 (R1.3)
2.105.11 Choice Report Periodicity Scale

Full Name
Choice Report Periodicity Scale
Abbreviated Name
rptPrdUnit
Managed Object

3GPP Name
CHOICE Report Periodicity Scale
3GPP Reference
TS 25.433
Description
This parameter indicates the report period unit applied by Node B

for measurement result reporting.
Instance
RNC
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-04-008
ZWF21-10-004


Power Control FG
Location Service FG
1: ms
2: min
Unit
N/A
Default Value
ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2561
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Function: This parameter indicates the time unit of measurement
report transmitted by Node B.

Configuration Rule: According to the measurement period, which
is determined according to the contribution to the system load and
the timeliness of the measurement report.
Function: This parameter indicates the time unit of measurement
Reason

Configuration Rule:
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.105.12 Report Period

Full Name
Report Period
Abbreviated Name
rptPrd
Managed Object

3GPP Name
Report Periodicity Value
3GPP Reference
TS 25.433
Description
This parameter indicates the frequency of measurement report

transmitted by Node B.
Instance
RNC
2-2562
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-04-008
ZWF21-10-004


Power Control FG
Location Service
RptPrdUnit =1: (10..60000)ms, step 10ms

RptPrdUnit =2: (1..60)min step min
Unit
ms
Default Value

Control : 1000ms;
Other measurements: 4000ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the frequency of measurement

Configuration Rule: According to the contribution to the system load
and the timeliness of the measurement report.
The larger the value, the more contribution to the system load but
the less timely of the measurement report; the smaller the value,
the less contribution to the system load but the more timely of the
measurement report.
According to the contribution to the system load and the timeliness
Reason
of the measurement report.
2-2563
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

Configuration
N/A
N/A
2.106 External ENodeB

Function(UExternalENBFunction)
2.106.1 External ENodeB Function Object ID
Full Name
External ENodeB Function Object ID
Abbreviated Name
UExternalENBFunctionId
Managed Object
External ENodeB Function(UExternalENBFunction)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the eNodeB configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-2564
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>External Resource Configuration->External ENodeB Function
N/A
N/A
2.106.2 ENodeB ID
Full Name
ENodeB ID
Abbreviated Name
eNodeBId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of the eNode B that the EUTRAN

cell belongs to. The eNode B may be a macro eNode B or a home
eNode B.
Instance
EUtran Neighboring Cell
ZWF21-03-110
2-2565
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover with LTE
Basic Id Parameter
0..268435455
Unit
N/A
Default Value
N/A
Related Parameters
ENodeBType
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the ID of the eNode B
that the EUTRAN cell belongs to.

Configuration rule: This parameter must be configured in
accordance with the network deployment.
The eNode B that an EUTRAN cell belongs to may be a micro
eNode B or a home eNode B.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.106.3 ENodeB Type

Full Name
ENodeB Type
Abbreviated Name
eNodeBType
2-2566
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the eNodeB type that the EUTRAN cell
belongs to, including the Macro eNodeB and the Home eNodeB.
Instance
ZWF21-03-110
Handover with LTE
Basic Id Parameter
0: Macro eNodeB
1: Home eNodeB
Unit
N/A
Default Value
0: Macro eNodeB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the eNodeB type that
the EUTRAN cell belongs to.

The eNodeB type that the EUTRAN cell belongs to is as follows:
0: Macro eNodeB
1: Home eNodeB
The default value is set based on the on-site situations. The macro
Reason
eNodeB is usually used.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
2-2567
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.106.4 RncID
Full Name
RncID
Abbreviated Name
rncid
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the identifier of the RNC that the EUTRAN cell
belongs to.
Instance
ZWF21-03-110
Handover with LTE
Basic parameter
0..4095
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2568
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter configures the RNC identifier

Configuration rule: Set the parameter value according to the
network planning and optimization result and the protocol version
of the SGSN. If the SGSN does not recognize the eNodeBID of
the EUTRAN cell, the RNCID/LAC/RAC should be used for the
EUTRAN cell. Otherwise, ignore this parameter.
The SGSN can recognize eNodeBID of the EUTRAN cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.107 External EUTRAN Cell

FDD(UExternalEUtranCellFDD)
2.107.1 External EUTRAN Cell FDD Object ID
Full Name
External EUTRAN Cell FDD Object ID
Abbreviated Name
UExternalEUtranCellFDDId
Managed Object
External EUTRAN Cell FDD(UExternalEUtranCellFDD)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the external EUTRAN cell

FDD configuration.
Instance
RNC
2-2569
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
N/A
0..999999999999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>External Resource Configuration->External ENodeB

Function->External EUTRAN Cell FDD
N/A
N/A
2.107.2 EUTRAN Physical Cell Identity

Full Name
EUTRAN Physical Cell Identity
Abbreviated Name
pci
Managed Object

2-2570
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Physical Cell Identity
3GPP Reference
TS.25.331
Description
The parameter is used to identify a Eutran physical cell. There are

504 unique physical-layer cell identities. The physical-layer cell
identities are grouped into 168 unique physical-layer cell-identity
groups, each group containing three unique identities.
Instance
EUTRAN Neighboring Cell
ZWF21-20-003
Cell Management
Basic Parameter
0..503
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter should be configured according to the "Physical Cell
Identity" of the neighboring EUTRAN cell.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

V4.13.10.15/V3.13.10.15
2-2571
SJ-20141209142030-013|2015-11-12 (R1.3)
ADD
2.107.3 PLMN Number of Sharing the EUTRAN Cell

Full Name
PLMN Number of Sharing the EUTRAN Cell
Abbreviated Name
plmnNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of PLMNs to which the object

cell belongs.
Instance
RNC
N/A
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
0
2-2572
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.4 Mobile Country Code

Full Name
Mobile Country Code
Abbreviated Name
mcc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
MCC uniquely identifies the country that the UE users (or system)
belong to. MCC is allocated uniformly and internationally.
Instance
RNC
N/A
N/A
Basic Parameter
0..999
Unit
N/A
Default Value
460
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
2-2573
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
Mobile Country Code
Reason
deployment.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.5 Mobile Network Code

Full Name
Mobile Network Code
Abbreviated Name
mnc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
MNC identifies a specific PLMN inside one country (decided by

MCC).
Instance
RNC
N/A
N/A
Basic Parameter
0..999
2-2574
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
configured based on network authorized area
Reason
deployment.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.6 MNC BCD Code Length

Full Name
MNC BCD Code Length
Abbreviated Name
mncLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2575
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the code length of the MNC BCD of the
neighboring EUtran cell.
Instance
N/A
N/A
Basic Parameter
2..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.7 EUTRAN Cell Identity

2-2576
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
EUTRAN Cell Identity
Abbreviated Name
cellIdentity
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates EUTRAN cell identity. It identifies a

neighboring EUTRAN cell uniquely.
Instance
ZWF21-20-003
Cell Management
Basic Parameter
0..255
Unit
N/A
Default Value
N/A
Related Parameters
EUtranNbr->NEutranCId
NEUtranCId must exist in EUtranCId in EUtranCell MO.
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Primary key can not be modified. The parameter is must be Network
planned, and is unique in a ENodeB
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path

2-2577
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.107.8 Eutran Frequency Band Indicator

Full Name
Eutran Frequency Band Indicator
Abbreviated Name
eutranFreqBandInd
Managed Object

3GPP Name
Frequency Band Indicator; Frequency band indicator; Frequency

band indicator 2
3GPP Reference
N/A
Description
This parameter indicates the frequency band of the Eutran cells.
Instance
N/A
N/A
Basic Parameter
0Band 1;
1Band 2;
2Band 3;
3Band 4;
4Band 5;
5Band 6
6Band 7;
7Band 8;
8Band 9;
9Band 10;
10Band 11;
11Band 12;
12Band 13;
13Band 14;
16Band 17;
17Band 18;
18Band 19;
19Band 20;
20Band 21;
21Band 22;
22Band 23;
2-2578
SJ-20141209142030-013|2015-11-12 (R1.3)
23Band 24;
24Band 25;
25Band 26;
26Band 27;
27Band 28;
28Band 29;
32Band 33;
33Band 34;
34Band 35;
35Band 36;
36Band 37;
37Band 38;
38Band 39;
39Band 40;
40Band 41;
41Band 42;
42Band 43;
43Band 44.
Unit
N/A
Default Value
N/A
Related Parameters
EutranCellType
EutranCellType is 0 then EutranFreqBandInd is 0~13 or 16~28;
Parameters
EutranCellType is 1 then EutranFreqBandInd is 32~43.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: frequency bands of EUTRAN cells
Related factors: network deployment of the operator
The default parameter value is set based on the network deployment
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-2579
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A
2.107.9 Downlink EUTRAN Absolute Radio Frequency Channel

Number
Full Name
Downlink EUTRAN Absolute Radio Frequency Channel Number
Abbreviated Name
earfcnDl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the downlink E-UTRA Absolute Radio

Frequency Channel Number (EARFCN). F_DL is the center carrier
frequency, F_DL_low is dl lowest carrier frequency, N_DL is
DlEARFCN, and N_Offs-Dl is the carrier frequency offset indicated
by the band indicator.
Instance
N/A
N/A
Basic Parameter
Band 1: 0-599, Band 2: 600-1199, Band 3: 1200-1949, Band 4:

1950-2399, Band 5: 2400-2649, Band 6: 2650-2749, Band 7:
2750-3449, Band 8: 3450-3799, Band 9: 3800-4149, Band 10:
4150-4749, Band 11: 4750-4949, Band 12: 5010-5179, Band 13:
5180-5279, Band 14: 5280-5379, Band 17: 5730-5849, Band 18
5850-5999Band 196000-6149Band 206150-6449Band
216450-6599Band 22: 6600-7399Band 237500-7699
Band 247700-8039Band 258040-8689Band 26:
8690-9039Band 279040-9209Band 289210-9659Band
29: 9660-9769Band 33: 36000-36199, Band 34: 36200-36349,
Band 35: 36350-36949, Band 36: 36950-37549, Band 37:
37550-37749, Band 38: 37750-38249, Band 39: 38250-38649,
2-2580
SJ-20141209142030-013|2015-11-12 (R1.3)
Band 40: 38650-39649Band 4139650-41589Band 42

41590-43589Band 4343590-45589Band 44: 45590-46589
Unit
N/A
Default Value
Related Parameters
EutranFreqBandInd
EutranFreqBandInd is 0Band 1 then EarfcnDl is Band 1:
Parameters
0-599;
600-1199;
1200-1949;
1950-2399;
2400-2649;
2650-2749;
2750-3449;
3450-3799;
3800-4149;
4150-4749;
4750-4949;
5010-5179;
EutranFreqBandInd is 12Band 13 then EarfcnDl is Band
13: 5180-5279
14: 5280-5379;
17: 5730-5849;
185850-5999;
196000-6149;
206150-6449;
216450-6599;
2-2581
SJ-20141209142030-013|2015-11-12 (R1.3)

226600-7399;
237500-7699;
247700-8039;
258040-8689;
268690-9039;
279040-9209;
289210-9659;
299660-9769;
33: 36000-36199;
34: 36200-36349;
35: 36350-36949;
36: 36950-37549;
37: 37550-37749;
38: 37750-38249;
39: 38250-38649;
40: 38650-39649;
41: 39650-41589;
42: 41590-43589;
43: 43590-45589;
44: 45590-46589.
Data Type
long
Parameter Type
Negotiation With CN
No
2-2582
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: number of absolute RF channels of downlink
EUTRAN
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.10 Uplink EUTRAN Absolute Radio Frequency Channel

Number
Full Name
Uplink EUTRAN Absolute Radio Frequency Channel Number
Abbreviated Name
earfcnUl
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the uplink E-UTRA Absolute Radio

Frequency Channel Number. F_UL is the center carrier frequency,
F_UL_low is ul lowest carrier frequency, N_UL is UlEARFCN, and
N_Offs-Ul is the carrier frequency offset indicated by band indicator.
Instance
N/A
2-2583
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Basic Parameter
Band 1: 18000-18599, Band 2: 18600-19199, Band 3:

19200-19949, Band 4: 19950-20399, Band 5: 20400-20649, Band
6: 20650-20749, Band 7: 20750-21449, Band 8: 21450-21799,
Band 9: 21800-22149, Band 10: 22150-22749, Band 11:
22750-22949, Band 12: 23010-23179, Band 13: 23180-23279,
Band 14: 23280-23379, Band 17: 23730-23849, Band 18:
23850-23999, Band 19: 24000-24149, Band 2024150-24449,
Band 21: 24450-24599, Band 22: 2460025399, Band 23:
25500-25699, Band 24: 25700-26039, Band 25: 26040-26689,
Band 26: 2669027039, Band 27: 2704027209, Band 28:
2721027659, Band 29: 065535,Band 33: 36000-36199, Band
34: 36200-36349, Band 35: 36350-36949, Band 36: 36950-37549,
Band 37: 37550-37749, Band 38: 37750-38249, Band 39:
38250-38649, Band 40: 38650-39649, Band 41: 39650-41589,
Band 42: 41590-43589, Band 43: 43590-45589, Band 44:
4559046589
Unit
N/A
Default Value
Related Parameters
EutranFreqBandInd
EutranFreqBandInd is 0Band 1 then EarfcnUl is Band 1:
Parameters
18000-18599;
18600-19199;
19200-19949;
19950-20399;
20400-20649;
20650-20749;
20750-21449;
21450-21799;
21800-22149;
22150-22749;
22750-22949;
2-2584
SJ-20141209142030-013|2015-11-12 (R1.3)

23010-23179;
EutranFreqBandInd is 12Band 13 then EarfcnUl is Band
13: 23180-23279
14: 23280-23379;
17: 23730-23849;
18: 23850-23999;
19: 24000-24149;
20: 24150-24449;
21: 24450-24599;
22: 2460025399;
23: 25500-25699;
24: 25700-26039;
25: 26040-26689;
26: 2669027039;
27: 2704027209;
28: 2721027659;
29: 065535;
33: 36000-36199;
34: 36200-36349;
35: 36350-36949;
36: 36950-37549;
37: 37550-37749;
38: 37750-38249;
2-2585
SJ-20141209142030-013|2015-11-12 (R1.3)

39: 38250-38649;
40: 38650-39649;
41: 39650-41589;
42: 41590-43589;
43: 43590-45589;
44: 4559046589.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: number of absolute RF channels of uplink
EUTRAN
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.11 Sharing Mobile Country Code

2-2586
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Sharing Mobile Country Code
Abbreviated Name
sharingMCC
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates a Mobile Country Code (MCC) that

uniquely identifies the country that a mobile user or system belongs
to.
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
460
Related Parameters
N/A
N/A
Parameters
Data Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Mobile Country Code (MCC).
Related factors: network deployment of the operator.
Reason
the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
2-2587
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

V4.13.10.15/V3.13.10.15
ADD
2.107.12 Sharing Mobile Network Code

Full Name
Sharing Mobile Network Code
Abbreviated Name
sharingMNC
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the Mobile Network Code (MNC) of the

shared cell.
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2588
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: MNC of the LTE neighbor cell.
Related factors: This parameter is an interconnection parameter

that must be configured according to the actual MNC of the LTE
neighbor cell.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

V4.13.10.15/V3.13.10.15
ADD
2.107.13 sharing MNC Length

Full Name
sharing MNC Length
Abbreviated Name
sharingMNCLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the length of the MNC in BCD format. An

MNC consists of two or three decimal digits (0 to 9). This parameter
indicates the number of digits in an MNC.
Instance
External EUTRAN Cell
ZWF21-30-101
RAN Sharing FG
2..3
Unit
N/A
2-2589
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used for interconnection of the Iur interface.

Related factors: This parameter must be configured according to
the length of the MNC (in BCD format) of the neighbor cell.
The default value is set according to the length of a common MNC
Reason
in BCD format.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

V4.13.10.15/V3.13.10.15
ADD
2.107.14 Tracking Area Code

Full Name
Tracking Area Code
Abbreviated Name
tac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2590
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the TAC(code of the tracing areas) of the

Instance
ZWF21-03-110
Handover with LTE
Basic Id Parameter
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the code of the tracing
areas where a neighboring cell resides.

N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2591
SJ-20141209142030-013|2015-11-12 (R1.3)
2.107.15 EUTRAN Measurement Bandwidth

Full Name
EUTRAN Measurement Bandwidth
Abbreviated Name
eUtranMeasBand
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum allowed measurement

bandwidth on a carrier frequency.
Instance
ZWF21-03-110
Handover with LTE
06RB(1.4MHz),
115RB(3MHz),
225RB(5MHz),
350RB(10MHz),
475RB(15MHz),
5100RB(20MHz).
Unit
N/A
Default Value
06RB(1.4MHz)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: maximum measurement bandwidth on a single
EUTRAN carrier frequency

Reason
requirements.
2-2592
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Location Area Code
Abbreviated Name
lac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the LAC that the EUTRAN cell belongs to.
Instance
N/A
N/A
Basic parameter
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-2593
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Routing Area Code
Abbreviated Name
rac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the RAC that the EUTRAN cell belongs to.
Instance
N/A
N/A
2-2594
SJ-20141209142030-013|2015-11-12 (R1.3)
Basic parameter
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.18 Eutran Downlink Load Threshold

Full Name
Eutran Downlink Load Threshold
2-2595
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
eutranDlLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink overload threshold in Eutran

system.
Instance
Eutran Neighboring Cell
ZWF21-03-026
(1.. 100)%, step 1%
Unit
Default Value
85
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: downlink load state of EUTRAN cells.
Related factors: inter-RAT handover or redirection probability, loads

of inter-RAT neighboring cells
The smaller the parameter is, the easier it is for UTRAN to determine
a EUTRAN cell is overloaded in an inter-RAT (3G->EUTRAN)
handover or redirection, so that the handover or redirection to
EUTRAN will not be triggered. Calls may be dropped when 3G
signal quality becomes poor.
The larger the parameter is, the more difficult it is for UTRAN
to determine a EUTRAN cell is overloaded in an inter-RAT
(3G->EUTRAN) handover or redirection. If the EUTRAN cell is
really overloaded and cannot accept new users, the handover or
redirection may fail.
The default parameter value is set based on the probability of
Reason
inter-RAT handover and inter-RAT load.
2-2596
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.107.19 Eutran Uplink Load Threshold

Full Name
Eutran Uplink Load Threshold
Abbreviated Name
eutranUlLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink overload threshold in Eutran

system.
Instance
ZWF21-03-026
(1.. 100)%, step 1%
Unit
Default Value
85
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-2597
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: uplink load state of EUTRAN cells.

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.108 External EUTRAN Cell

TDD(UExternalEUtranCellTDD)
2.108.1 External EUTRAN Cell TDD Object ID
Full Name
External EUTRAN Cell TDD Object ID
2-2598
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
UExternalEUtranCellTDDId
Managed Object
External EUTRAN Cell TDD(UExternalEUtranCellTDD)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the external EUTRAN cell

TDD configuration.
Instance
RNC
N/A
N/A
N/A
0..999999999999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path

Function->External EUTRAN Cell TDD
N/A
2-2599
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.108.2 EUTRAN Physical Cell Identity

Full Name
EUTRAN Physical Cell Identity
Abbreviated Name
pci
Managed Object

3GPP Name
Physical Cell Identity
3GPP Reference
TS.25.331
Description
This parameter is used to identify an EUTRAN physical cell. There

are 504 physical cell IDs, which are divided into 168 groups. Each
group contains three unique physical cell IDs. One physical cell
ID belongs to only one group. This parameter specifies the PCI
of a TDD cell.
Instance
ZWF21-20-003
Cell Management
Basic Parameter
0..503
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter should be configured according to the "Physical Cell
Identity" of the neighboring EUTRAN cell.
N/A
Reason
Change Take Effect
2-2600
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path

V4.13.10.15/V3.13.10.15
ADD
2.108.3 PLMN Number of Sharing the EUTRAN Cell

Full Name
PLMN Number of Sharing the EUTRAN Cell
Abbreviated Name
plmnNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of PLMNs to which the object

cell belongs.
Instance
RNC
N/A
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2601
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Mobile Country Code
Abbreviated Name
mcc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
Instance
RNC
N/A
N/A
Basic Parameter
0..999
2-2602
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
460
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Mobile Country Code
Reason
deployment.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Mobile Network Code
Abbreviated Name
mnc
Managed Object

3GPP Name
2-2603
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description

MCC).
Instance
RNC
N/A
N/A
Basic Parameter
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Reason
deployment.
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2604
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
MNC BCD Code Length
Abbreviated Name
mncLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
N/A
N/A
Basic Parameter
2..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-2605
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path

N/A
N/A
2.108.7 EUTRAN Cell Identity

Full Name
EUTRAN Cell Identity
Abbreviated Name
cellIdentity
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates EUTRAN cell identity. It identifies a

neighboring EUTRAN cell uniquely.
Instance
ZWF21-20-003
Cell Management
Basic Parameter
0..255
Unit
N/A
Default Value
N/A
Related Parameters
EUtranNbr->NEutranCId
NEUtranCId must exist in EUtranCId in EUtranCell MO.
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Primary key can not be modified. The parameter is must be Network
planned, and is unique in a ENodeB
N/A
Reason
2-2606
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.108.8 Eutran Frequency Band Indicator

Full Name
Eutran Frequency Band Indicator
Abbreviated Name
eutranFreqBandInd
Managed Object

3GPP Name

band indicator 2
3GPP Reference
N/A
Description
This parameter indicates the frequency band of the Eutran cells.
Instance
N/A
N/A
Basic Parameter
0: Band 1;
1: Band 2;
2: Band 3;
3: Band 4;
4: Band 5;
5: Band 6
6: Band 7;
7: Band 8;
8: Band 9;
9: Band 10;
2-2607
SJ-20141209142030-013|2015-11-12 (R1.3)
10: Band 11;

11: Band 12;
12: Band 13;
13: Band 14;
16: Band 17;
17: Band 18;
18: Band 19;
19: Band 20;
20: Band 21;
22: Band 23;
23: Band 24;
24: Band 25;
32: Band 33;
33: Band 34;
34: Band 35;
35: Band 36;
36: Band 37;
37: Band 38;
38: Band 39;
39: Band 40;
40: Band 41;
41: Band 42;
42: Band 43;
Unit
N/A
Default Value
N/A
Related Parameters
EutranCellType
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: frequency bands of EUTRAN cells
Reason
of the operator.
Change Take Effect
New Connection
No
0
2-2608
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.108.9 Downlink EUTRAN Absolute Radio Frequency Channel

Number
Full Name
Downlink EUTRAN Absolute Radio Frequency Channel Number
Abbreviated Name
earfcn
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates the downlink E-UTRA Absolute Radio

Frequency Channel Number (EARFCN). F_DL is the center carrier
frequency, F_DL_low is dl lowest carrier frequency, N_DL is
DlEARFCN, and N_Offs-Dl is the carrier frequency offset indicated
by the band indicator.
Instance
N/A
N/A
Basic Parameter

1950-2399, Band 5: 2400-2649, Band 6: 2650-2749, Band 7:
2750-3449, Band 8: 3450-3799, Band 9: 3800-4149, Band 10:
4150-4749, Band 11: 4750-4949, Band 12: 5010-5179, Band 13:
5180-5279, Band 14: 5280-5379, Band 17: 5730-5849, Band 18
5850-5999Band 196000-6149Band 206150-6449Band
216450-6599Band 22: 6600-7399Band 237500-7699
Band 247700-8039Band 258040-8689Band 26:
8690-9039Band 279040-9209Band 289210-9659Band
29: 9660-9769Band 33: 36000-36199, Band 34: 36200-36349,
Band 35: 36350-36949, Band 36: 36950-37549, Band 37:
2-2609
SJ-20141209142030-013|2015-11-12 (R1.3)
37550-37749, Band 38: 37750-38249, Band 39: 38250-38649,

Band 40: 38650-39649Band 4139650-41589Band 42
41590-43589Band 4343590-45589Band 44: 45590-46589
Unit
N/A
Default Value
Related Parameters
EutranFreqBandInd
EutranFreqBandInd is 0Band 1 then Earfcn is Band 1: 0-599;
Parameters
EutranFreqBandInd is 1Band 2 then Earfcn is Band 2:

600-1199;
1200-1949;
1950-2399;
2400-2649;
2650-2749;
2750-3449;
3450-3799;
3800-4149;
4150-4749;
4750-4949;
5010-5179;
5180-5279;
5280-5379;
5730-5849;
EutranFreqBandInd is 17Band 18 then Earfcn is Band 18
5850-5999;
6000-6149;
6150-6449;
6450-6599;
2-2610
SJ-20141209142030-013|2015-11-12 (R1.3)

6600-7399;
7500-7699;
7700-8039;
8040-8689;
8690-9039;
9040-9209;
9210-9659;
9660-9769;
36000-36199;
36200-36349;
36350-36949;
36950-37549;
37550-37749;
37750-38249;
38250-38649;
38650-39649;
39650-41589;
41590-43589;
43590-45589;
45590-46589.
Data Type
long
Parameter Type
Negotiation With CN
No
2-2611
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: number of absolute RF channels of downlink
EUTRAN
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Abbreviated Name
sharingMCC
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the Mobile Country Code (MCC) of the

shared cell. An MCC uniquely identifies the country that a mobile
user or system belongs to.
Instance
RNC
ZWF21-30-101
2-2612
SJ-20141209142030-013|2015-11-12 (R1.3)
RAN Sharing FG
0..999
Unit
N/A
Default Value
460
Related Parameters
N/A
N/A
Parameters
Data Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Mobile Country Code (MCC).
Reason
the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path

V4.13.10.15/V3.13.10.15
ADD

Full Name
Abbreviated Name
sharingMNC
Managed Object

2-2613
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the Mobile Network Code (MNC) of the

shared cell.
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: MNC of the LTE neighbor cell.
Related factors: This parameter is an interconnection parameter

that must be configured according to the actual MNC of the LTE
neighbor cell.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

2-2614
SJ-20141209142030-013|2015-11-12 (R1.3)
V4.13.10.15/V3.13.10.15
ADD

Full Name
sharing MNC Length
Abbreviated Name
sharingMNCLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the length of the MNC in BCD format. An

MNC consists of two or three decimal digits (0 to 9). This parameter
indicates the number of digits in an MNC.
Instance
External EUTRAN Cell
ZWF21-30-102
RAN Sharing FG
2..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long[3]
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used for interconnection of the Iur interface.

Related factors: This parameter must be configured according to
the length of the MNC (in BCD format) of the neighbor cell.
The default value is set according to the length of a common MNC
Reason
in BCD format.
2-2615
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

V4.13.10.15/V3.13.10.15
ADD
2.108.13 Tracking Area Code

Full Name
Tracking Area Code
Abbreviated Name
tac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the TAC(code of the tracing areas) of the

Instance
ZWF21-03-110
Handover with LTE
Basic Id Parameter
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-2616
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the code of the tracing
areas where a neighboring cell resides.

Related factors: network deployment of operators.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.108.14 EUTRAN Measurement Bandwidth

Full Name
EUTRAN Measurement Bandwidth
Abbreviated Name
eUtranMeasBand
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum allowed measurement

bandwidth on a carrier frequency.
Instance
ZWF21-03-110
Handover with LTE
2-2617
SJ-20141209142030-013|2015-11-12 (R1.3)
06RB(1.4MHz),
115RB(3MHz),
225RB(5MHz),
350RB(10MHz),
475RB(15MHz),
5100RB(20MHz).
Unit
N/A
Default Value
06RB(1.4MHz)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: maximum measurement bandwidth on a single
EUTRAN carrier frequency

Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A

2-2618
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Location Area Code
Abbreviated Name
lac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the LAC that the EUTRAN cell belongs to.
Instance
N/A
N/A
Basic parameter
0..65535
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
Change Take Effect
No
How to Impact
N/A
2-2619
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path

N/A
N/A

Full Name
Routing Area Code
Abbreviated Name
rac
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the RAC that the EUTRAN cell belongs to.
Instance
N/A
N/A
Basic parameter
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2620
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.108.17 Eutran Downlink Load Threshold

Full Name
Eutran Downlink Load Threshold
Abbreviated Name
eutranDlLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink overload threshold in Eutran

system.
Instance
ZWF21-03-026
2-2621
SJ-20141209142030-013|2015-11-12 (R1.3)
(1.. 100)%, step 1%
Unit
Default Value
85
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: downlink load state of EUTRAN cells.

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2-2622
SJ-20141209142030-013|2015-11-12 (R1.3)
2.108.18 Eutran Uplink Load Threshold

Full Name
Eutran Uplink Load Threshold
Abbreviated Name
eutranUlLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink overload threshold in Eutran

system.
Instance
ZWF21-03-026
(1.. 100)%, step 1%
Unit
Default Value
85
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: uplink load state of EUTRAN cells.

2-2623
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path

N/A
N/A
2.109 External RNC Function (UExternalRncFunction)

2.109.1 External RNC Function Object ID
Full Name
External RNC Function Object ID
Abbreviated Name
UExternalRncFunctionId
Managed Object
External RNC Function (UExternalRncFunction)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the external RNC

configuration.
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
2-2624
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>External Resource Configuration->External RNC Function
N/A
N/A

Full Name
Mobile Country Code
Abbreviated Name
mcc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
2-2625
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
460
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Mobile Country Code
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Mobile Network Code
Abbreviated Name
mnc
Managed Object

2-2626
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description

MCC).
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
N/A
Mobile NetWork Code
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2627
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.109.4 Adjacent RNC Identity

Full Name
Adjacent RNC Identity
Abbreviated Name
rncId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter is the adjacent RNC identity.
Instance
RNC
N/A
N/A
Basic ID parameter
0..4095
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Main function: This parameter indicates the adjacent RNC identify.
Influence factor: the value should set by the Network

Planning&Optimization and the protocol version of SGSN.if SGSN
don't recognize eNodeBID of Eutran CELL, RNCID/LAC/RAC should
be used for Eutran CELL. otherwise, ignore this parameter
N/A
Reason
Change Take Effect
New Connection
No
2-2628
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
sharingMCC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the sharing MCC of the neighboring RNC.
Instance
RNC and PLMN
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_SHARED_PLMN-1]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2629
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: neighboring RNC' sharing MCC.
Related factors: This parameter is set according to the carrier's

network deployment.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
sharingMNC
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the sharing MNC of the neighboring RNC.
Instance
RNC and PLMN
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-2630
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: neighboring RNC' sharing MNC.

network deployment.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.109.7 Used Iur Link

Full Name
Used Iur Link
Abbreviated Name
refUIurLink
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
RNC
N/A
N/A
2-2631
SJ-20141209142030-013|2015-11-12 (R1.3)
Basic ID parameter
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.109.8 SRNC Diversity Combination Indicator

Full Name
SRNC Diversity Combination Indicator
Abbreviated Name
divCtrlInd
Managed Object

3GPP Name
3GPP Reference
TS 25.423
2-2632
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter is the neighboring cell's diversity combination

indicator when the current RNC is an SRNC.
Instance
NE Office
ZWF21-03-006
Inter-RNC Handover with Iur Support
Handover Control FG
0: May
1: Must
2: Must not
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the combination
method of DRNC Iur radio links that the SRNC indicates.

Configuration rule: This parameter is influenced by the combination
capability and compatibility of the DRNC.
When it is set to "May", the better compatibility can be acquired.
When it is set to "Must" or "Must Not", the consumed transmission
resource can be controlled by the SRNC, but the support of the
DRNC is needed.
The default value is to ensure best compatibility
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2633
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.109.9 DRNC Diversity Combination Indicator

Full Name
DRNC Diversity Combination Indicator
Abbreviated Name
dIurCmbInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the neighboring cell's diversity combination

indicator when the current RNC is a DRNC.
Instance
NE Office
ZWF21-03-006
Handover Control FG
0: Combined
1: Not Combined
Unit
N/A
Default Value
0: Combined
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2634
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter configures the combination
method of DRNC Iur radio links.

Related factors: consumed transmission resources and DRNC
combine compatibility.
When this parameter is set to "Combined", transmission resource
consumption can be reduced, but the support of DRNC is needed.
When this parameter is set to "Not Combined", transmission
resource consumption cannot be reduced, but the support of DRNC
is not needed.
The default value is to save transmission resource.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110 External UTRAN Cell(UExternalUtranCellFDD)

2.110.1 External UTRAN Cell Object ID
Full Name
External UTRAN Cell Object ID
Abbreviated Name
UExternalUtranCellFDDId
Managed Object
External UTRAN Cell(UExternalUtranCellFDD)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the external UTRAN cell.
Instance
RNC
N/A
2-2635
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
0..999999999999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
->External UTRAN Cell
N/A
N/A
2.110.2 Cell Identity

Full Name
Cell Identity
Abbreviated Name
cId
Managed Object

2-2636
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
C-Id; Cell Identifier
3GPP Reference
TS 25.423;
TS 25.331;
TS 25.401
Description
This parameter is the identifier of the neighboring cell, which is valid

only in the RNC where the cell is located.
Instance
RNC
N/A
N/A
Basic Parameter
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
MCC of R8AdjCel, MNC of R8AdjCel, RncId of R8AdjCel, CId of

R8AdjCel
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the ID of the
neighboring UMTS cell.

neighboring UMTS cell, and be configured according to the ID of the
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2637
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Mobile Country Code
Abbreviated Name
mcc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
Instance
UTRAN Cell
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
460
Related Parameters
MNC
LAC
CI
mcc+mnc+lac+cellIdentity must be unqiue ; the same requirement
Parameters
for combination of sharingMCC[]+sharingMNC+lac+cellIdentity
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2638
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: neighboring UTRAN external cells' MCC.

operator network deployment.
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Mobile Network Code
Abbreviated Name
mnc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter identifies a specific PLMN inside a country, which is

determined by an MCC.
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
2-2639
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the MNC of the

neighboring UMTS cell, and be configured according to the MNC
of the neighboring UMTS cell.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.5 RNC Identity of Adjacent cell

Full Name
RNC Identity of Adjacent cell
Abbreviated Name
rncId
Managed Object

3GPP Name
RNC-ID; RNC Identifier

2-2640
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the RNC identifier of a neighboring cell. It

is uniquely allocated within a PLMN.
Instance
External UTRAN Cell
N/A
N/A
Basic Parameter
0..4095
Unit
N/A
Default Value
N/A
Related Parameters
parent rncid,
1)just same as its parent rncid, 2)mnc+mcc+rncID+cID must be
Parameters
unqiue
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: RNCID of a neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2641
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.6 Cell Mode

Full Name
Cell Mode
Abbreviated Name
cellMode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell mode of the object.
Instance
RNC
N/A
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read
2-2642
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Location Area Code
Abbreviated Name
lac
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the code of the location area where a

neighboring cell is located.
To locate where an MS is, the areas covered by a PLMN are divided
into multiple location areas that are identified by LACs. LAC is one
part of an LAI, which consists of an MCC, an MNC and an LAC.
There are multiple cells within a location area.
Instance
RNC
N/A
N/A
Basic Parameter
1..0xfffd, 0xffff
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-2643
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: location area code of a UMTS neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Routing Area Code
Abbreviated Name
rac
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the code of the routing area where a

neighboring cell is located. It is valid only when PS services are
supported. A RAC identifies a routing area within a location area in
a PLMN of the GSM-MAP type. It is used in PS services.RAC is
one part of an RAI, which consists of a PLMN-ID, an LAC and an
RAC.RAC is set by an operator through RNC O&M.
Instance
External UTRAN Cell

2-2644
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
Basic Parameter
0..255
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: routing area code
Related factors: network deployment of the operator (should be the

same as the LAC of a DRNC cell)
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.9 HCS_PRIO
Full Name
HCS_PRIO
Abbreviated Name
hcsPrio
2-2645
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
HCS_PRIO; HCS Prio
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.304
Description
This parameter indicates the HCS priority (0-7) for a GSM

neighboring cell. The highest priority is 7, and the lowest priority is 0.
Instance
External UTRAN Cell
ZWF21-03-005
ZWF21-03-021


0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: HCS priority (0-7) for a GSM neighboring cell
Related factors: velocity of a UE

The smaller the parameter value is, the lower the HCS priority of a
GSM cell is, the easier it is for a UE in the high-mobility state to
reselect this cell.
The greater the parameter value is, the higher the HCS priority of
a GSM cell is, the easier it is for a UE in the low-mobility state to
reselect this cell.
The default parameter value is set to 0 because the HCS priority
Reason
is not used.
Change Take Effect
No
2-2646
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.10 RACH Maximum Allowed UL TX Power

Full Name
RACH Maximum Allowed UL TX Power
Abbreviated Name
maximumAllowedUlTxPower
Managed Object

3GPP Name
Maximum Allowed UL Tx Power
3GPP Reference
TS 25.423;
TS 25.331
Description
This parameter indicates the maximum transmit power allowed for

the RACH of a neighboring cell. The actual maximum transmit
power of a UE equals min (maximum transmit power allowed for the
RACH, maximum transmit power supported by the UE).
Instance
RNC
ZWF21-03-005
OMCR: (-50..33)dBm, step 1dBm; RNC: D=P+50, 0..83
Unit
dBm
Default Value
24dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-2647
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: maximum allowed uplink transmit power of
a neighboring cell
Related factors: maximum transmit power that a UE supports
This parameter should be configured based on a UEs GSM
capabilities. A small parameter value may restrict the maximum
power that can be used by a UE, which results in an impact on the
service performance.
The default parameter value is set based on the maximum transmit
Reason
power that a UE supports.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.11 Qrxlevmin in SIB11

Full Name
Qrxlevmin in SIB11
Abbreviated Name
qrxlevMin
Managed Object

3GPP Name
Qrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
2-2648
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the minimum required receive level of

a cell for a UE to camp on. When the measurement quantity is
CPICH RSCP, a cell can be selected by a UE as the target cell only
when Qrxlevmeas of the cell exceeds Qrxlevmin. This parameter is
broadcast in SIB11.
Instance
External UTRAN Cell
ZWF21-03-005
OMCR: (-115..-25)dBm, step 2 dBm
Unit
dBm
Default Value
-115dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: minimum required receive level of a cell
(broadcast in SIB11) for a UE to camp on

Related factors: coverage of a neighboring RNC's cell
The smaller the parameter value is, and the easier it is to fulfill the
cell reselection criterion, and vice versa.
The default parameter value is set based on the coverage of a cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2649
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.110.12 DeltaQrxlevmin in SIB11

Full Name
DeltaQrxlevmin in SIB11
Abbreviated Name
deltaQrxlevmin
Managed Object

3GPP Name
DeltaQrxlevmin
3GPP Reference
TS 25.304
Description
This parameter indicates the increment to the minimum receive

level (DeltaQrxlevmin in SIB11) of the corresponding cell in
SIB11. If present, the actual value of Qrxlevmin = Qrxlevmin +
DeltaQrxlevmin.
Instance
External UTRAN Cell
ZWF21-03-005
OMCR: (-4..-2)dBm, Step2dBm
Unit
dB
Default Value
-2dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2650
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: increment to the minimum receive level
(DeltaQrxlevmin in SIB11) of the corresponding cell

Related factors: coverage of a cell
The smaller the parameter value is, the larger the range of
Qrxlevmin is, and the easier it is to fulfill the cell reselection criterion,
and vice versa. But when the parameter is set to a small value, the
call success rate for users at the edge of the cell may be affected.
Adjustment suggestion: It is suggested to adjust the parameter for
cells with large cell radiuses.
The default parameter value is set based on the coverage radius
Reason
of a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.13 Frequency Band Indicator

Full Name
Frequency Band Indicator
Abbreviated Name
freqBandInd
Managed Object

3GPP Name

band indicator 2
3GPP Reference
TS 25.331;
TS 25.423
Description
This parameter indicates the frequency band of the central

frequency of a neighboring cell.
Instance
RNC
2-2651
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
Basic Parameter
0: Band I
1: Band II
2: Band III
4: Band V
5: Band VI
7: Band VIII
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: frequency band of a UMTS neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2652
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.14 UUARFCN
Full Name
UUARFCN
Abbreviated Name
uarfcnUl
Managed Object

3GPP Name
UARFCN uplink (Nu); UL UARFCN; UARFCN; UTRA Absolute

Radio Frequency Channel Number
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
Description
This parameter indicates the central frequency point of the uplink

carrier used by a cell. It is the UTRA absolute radio frequency
channel number and corresponds to the central frequency of the
carrier used by the uplink channel of the cell.
Instance
External UTRAN Cell
N/A
N/A
Basic Parameter
Band I: 9612..9888
Band II: 9262..9538, 12, 37, 62, 87, 112, 137, 162, 187, 212, 237,
262, 287
Band III: 937..1288
Band V: 4132..4233, 782, 787, 807, 812, 837, 862
Band VI: 4162..4188, 812, 837
Band VIII: 2712 ..2863
Unit
N/A
Default Value
N/A
Related Parameters
freqBandInd
uarfcnDl
2-2653
SJ-20141209142030-013|2015-11-12 (R1.3)
)if freqBandInd = 0(Band I), uarfcnDl must be band1: 10562..10838,
Parameters
uarfcnUl=uarfcnDl-950;
2)if freqBandInd = 1(Band II), uarfcnDl must be band2: 9662..9938,
412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687,
3)if freqBandInd = 2(Band III), uarfcnDl must be band3: 1162.. 1513,
4)if freqBandInd = 4(Band V), uarfcnDl must be band5: 4357 4458
, 1007, 1012, 1032, 1037, 1062, 1087, uarfcnUl=uarfcnDl-225;
5)if freqBandInd = 5(Band VI), uarfcnDl must be band6: 4387
4413, 1037, 1062, uarfcnUl=uarfcnDl-225;
6)if freqBandInd = 7(Band VIII)uarfcnDl must be band8 : 2937..3088,
7)if freqBandInd = 3(Band IV), uarfcnDl must be band4: 1537..
1738, 1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087,
uarfcnUl=uarfcnDl-225.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: carrier frequency used by the uplink channel
Related factors: frequency allocation, and network deployment of

the operator
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2654
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.15 DUARFCN
Full Name
DUARFCN
Abbreviated Name
uarfcnDl
Managed Object

3GPP Name
UARFCN downlink (Nd); DL UARFCN; UARFCN; UTRA Absolute

3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
Description
This parameter indicates the occupied downlink carrier central

frequency point of the cell. It is UTRA absolute radio frequency
channel No., corresponding to the central frequency of the carrier
used by the downlink channel.
Instance
RNC
ZWF21-20-003
Cell Management
Band I: 10562..10838
Band II: 9662..9938, 412, 437, 462, 487, 512, 537, 562, 587, 612,
637, 662, 687
Band III: 1162.. 1513
Band V: 4357.. 4458, 1007, 1012, 1032, 1037, 1062, 1087
Band VI: 4387..4413, 1037, 1062
Band VIII: 2937..3088
Band IV: 1537.. 1738, 1887, 1912, 1937, 1962, 1987, 2012, 2037,
2062, 2087
Unit
N/A
Default Value
N/A
Related Parameters
uarfcnUl,
freqBandInd
2-2655
SJ-20141209142030-013|2015-11-12 (R1.3)
1) If freqBandInd=0 (Band I), uarfcnDl should be band 1:
Parameters
10562..10838, uarfcnUl=uarfcnDl-950;
2) If freqBandInd=1 (Band II), uarfcnDl must be band 2: 9662..9938,
412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687,
3)If freqBandInd=2 (Band III), uarfcnDl must be band 3: 1162..
1513, uarfcnUl=uarfcnDl-225;
4)If freqBandInd is 4 (Band V), uarfcnDl must be band 5: 4357
4458 , 1007, 1012, 1032, 1037, 1062, 1087, uarfcnUl=uarfcnDl-225;
5)If freqBandInd=5 (Band VI), uarfcnDl must be band 6: 4387
4413, 1037, 1062, uarfcnUl=uarfcnDl-225;
6)If freqBandInd =7 (Band VIII), uarfcnDl must be 2937..3088,
7)If freqBandInd=3 (Band IV), uarfcnDl must be 4: 1537..
1738, 1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087,
uarfcnUl=uarfcnDl-225.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: downlink carrier central frequency point of the cell

Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2656
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.16 Cell Primary Scrambling Code

Full Name
Cell Primary Scrambling Code
Abbreviated Name
primaryScramblingCode
Managed Object

3GPP Name
Primary Scrambling Code
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
The cell primary scrambling code is used to distinguish the cell.

There are 512 downlink primary scrambling codes in UTRAN totally.
Instance
External UTRAN Cell
N/A
N/A
Basic Parameter
0..511 65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates the Primary Scrambling Code of the
neighbouring cell of adjacent RNC
N/A
Reason
Change Take Effect
Ongoing Connection(at new radio link for Iur)
No
How to Impact
N/A
2-2657
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.110.17 Primary CPICH Power

Full Name
Primary CPICH Power
Abbreviated Name
primaryCpichPower
Managed Object

3GPP Name
Primary CPICH Power; Primary CPICH Tx Power
3GPP Reference
TS 25.423;
TS 25.433;
TS 25.331
Description
This parameter indicates the PCPICH transmit power of a

neighboring cell. It is an absolute value.
Instance
External UTRAN Cell
ZWF21-03-006
Handover Control FG
OMCR: (-10..50)dBm, step 0.1dBm; RNC: D= (P+10)*10, 0..600
Unit
dBm
Default Value
33.0dBm
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2658
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates PCPICH transmit
power of the neighboring cell.

Related factors: actual PCPICH transmit power of the neighboring
cell.
Adjustment suggestion: Configure this parameter according to the
actual PCPICH transmit power of the neighboring cell.
If pcpichPwrPre is "False", this parameter is invalid.
The default value of this parameter must be configured by a network
Reason
planning and optimization engineer according to the actual coverage

and system capacity requirements.
The P-CPICH power is normally 33 dBm when the maximum cell
power is 43 dBm.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.18 Qqualmin in SIB11

Full Name
Qqualmin in SIB11
Abbreviated Name
qqualMin
Managed Object

3GPP Name
Qqualmin
3GPP Reference
TS 25.331;
TS 25.304
Description
This parameter indicates the minimum required quality of a cell for a

UE to camp on. When the measurement quantity is CPICH Ec/No, a
cell can be selected by a UE as the target cell only when Qqualmeas
of the cell exceeds Qqualmin. This parameter is broadcast in SIB11.
2-2659
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
External UTRAN Cell
ZWF21-03-005
OMCR: (-24..0)dB, step 1dB
Unit
dB
Default Value
-18dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: minimum required quality of a cell (broadcast
in SIB11) for a UE to camp on

Related factors: difficulty of reselecting a neighboring RNC's cell,
coverage of the cell
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2660
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.19 STTD Support Indicator

Full Name
STTD Support Indicator
Abbreviated Name
sttdSupportIndicator
Managed Object

3GPP Name
STTD Support Indicator; STTD Indicator; STTD indicator
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates whether STTD can be used on the

downlink DPCH of a neighboring cell.
Instance
External UTRAN Cell
ZWF26-01-003
HSDPA MIMO
HSDPA MIMO FG
0: Supported
1: Not Supported
Unit
N/A
Default Value
Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: indicator of the STTD function

When the STTD function is enabled, the system capacity can be
improved. It is applied to the situation in which the system capacity
is restricted due to channel fading.
Reason
of the operator.
Change Take Effect
No
2-2661
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.20 Closed Loop Mode 1 Support Indicator

Full Name
Closed Loop Mode 1 Support Indicator
Abbreviated Name
closedLoopMode1SuptInd
Managed Object

3GPP Name
Closed Loop Mode1 Support Indicator; Diversity Mode; TX Diversity

Mode
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates if the neighboring cell supports Closed

Loop Mode1. Open loop diversity or closed loop diversity can be
used for downlink physical channel. There is only mode 1 for closed
loop diversity. When closed loop diversity is used, UE's feedback
is needed.
Instance
RNC
ZWF21-40-022
Transmit Diversity
Transmit Diversity FG
0: Supported
1: Not Supported
Unit
N/A
Default Value
Not Supported
Related Parameters
N/A
2-2662
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates if the neighboring cell of DRNC
supports Closed Loop Mode1.

Configuration Rule: It should be set according to if the neighboring
cell of DRNC actually supports Closed Loop Mode1.
Default value is set to "Not Support", which should be adjusted
Reason
according to the actual supported diversity mode of the neighboring

cell of DRNC.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
MNC BCD Code Length
Abbreviated Name
mncLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2663
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
neighboring UTRAN cell. An MNC contains two or three digits (09),
and this parameter indicates the number of the digits.
Instance
External UTRAN Cell
ZWF21-30-101
RAN Sharing FG
2..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: network planning parameter, Iur interface
parameter.
Related factor: MNC BCD code length of the Iur neighboring cells.
The default value is set based on commonly used MNC BCD
Reason
lengths.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2664
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
sharingMCC
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the code of the country where a cell is

located. It uniquely identifies the country that a mobile user or a
system belongs to.
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
460
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: mobile country code
Reason
of the operator.
Change Take Effect
New Connection
No
2-2665
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
sharingMNC
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter identifies the MNC for the operator of the shared cell.
Instance
RNC
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
2-2666
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: This parameter configures the MNC of the

neighboring UMTS cell, and be configured according to the MNC
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
sharing MNC Length
Abbreviated Name
sharingMNCLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
neighboring UTRAN cell. The MNC contains two or three digits
(09), and this parameter indicates the number of digits.
Instance
External UTRAN Cell
ZWF21-30-101
RAN Sharing FG
2-2667
SJ-20141209142030-013|2015-11-12 (R1.3)
2..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: network planning parameter, lur interface
parameter.
Related factors: MNC BCD code length of the Iur neighboring cells.
The default value is set based on the frequently-used MNC BCD
Reason
length.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.25 Service Area Code for CS and PS Domain

Full Name
Service Area Code for CS and PS Domain
Abbreviated Name
sac
Managed Object

3GPP Name
2-2668
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the code of the service area for CS and
PS domains where a neighboring cell is located. An SAC uniquely
identifies one or multiple cells that belong to the same LA (Location
Area). An SAC indicates the core network where a UE is. SAC
is one part of an SAI, which consists of a PLMN-ID, an LAC and
an SAC. SAC is set by an operator through RNC O&M. A cell can
belong to one or two service areas. If a cell belongs to two service
areas, one is used for CBS services and the other is used in the
CS+PS domain. For CBS services, a service area contains only one
cell. There is no such restriction to other domains.
Instance
External UTRAN Cell
N/A
N/A
Basic Parameter
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
No
Parameter function: service area code for CS and PS domains of
a neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
2-2669
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.110.26 Used UTRAN Registration Area

Full Name
Used UTRAN Registration Area
Abbreviated Name
refUUtranRegArea
Managed Object

3GPP Name
URA-ID; URA ID; URA Identity
3GPP Reference
TS 25.423;
TS 25.331;
TS 25.401
Description
This parameter indicates the UTRAN Registration Area (URA) ID.

One cell can belong to up to four URAs. Different UEs that reside in
this cell can belong to different URAs.
Instance
External UTRAN Cell
N/A
N/A
Basic Parameter
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
URANum of R8AdjCel, URA[4] of R8AdjCel
URA[4] is a list. the max element number of list is 4. the valid
Parameters
element number is URANum .
Data Type
string[DBS_RR_MAX_URA]
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2670
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter configures the URA information

neighboring GSM cell, and be configured according to the URA
information of the neighboring UMTS cell.
This parameter indicates the capabilities of the cells of the adjacent
Reason
RNC. The default value is set to "Not Supported". The parameter

should be set according to the actual on-site configuration.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.27 Shared Network Area Code Number

Full Name
Shared Network Area Code Number
Abbreviated Name
snacNum
Managed Object

3GPP Name
maxnoofSNAs
3GPP Reference
TS 25.423
Description
This parameter indicates the number of SNACs that the neighboring

cell belongs to.
Instance
External UTRAN Cell
ZWF21-30-102
RAN Sharing FG
2-2671
SJ-20141209142030-013|2015-11-12 (R1.3)
0.. MAX_NUM_SNAC_PER_GSMCEL,
MAX_NUM_SNAC_PER_GSMCEL=4
Unit
N/A
Default Value
Related Parameters
SNACNum of R8AdjCel, SNAC[4] of R8AdjCel
SNAC[4] is a list. the max element number of list is 4. the valid
Parameters
element number is SNACNum .
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the number of
SANCs of the neighboring UMTS cell.

neighboring GSM cell, and be configured according to the number
of SANCs of the neighboring UMTS cell. If network sharing is not
used, this parameter is set to 0.
The default value is determined by the fact that network sharing is
Reason
not used in most networks.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
snacList
2-2672
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the SNAC that the neighboring cell belongs
to. One cell can belong to up to four SNACs.
Instance
External UTRAN Cell
ZWF21-30-102
RAN Sharing FG
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
Parameters
Data Type
long[DBS_RR_MAX_NUM_SNAC_PER_UTRANCEL]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the SANC of the

neighboring GSM cell, and be configured according to the SNAC
information of the neighboring UMTS cell. If network sharing is not
used, this parameter should not be configured.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2673
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.110.29 HSPA Support Method

Full Name
HSPA Support Method
Abbreviated Name
hspaSptMeth
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates how a neighboring cell supports DCH,

HSDPA and HSUPA.
Instance
RNC
ZWF23-01-A
ZWF25-01-A

0: Not Support HSUPA and HSDPA

1: Support HSDPA and DCH
3: Support HSUPA , HSDPA and DCH
Unit
N/A
Default Value
Support HSUPA , HSDPA and DCH
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2674
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: HSPA capability of a neighboring cell
Related factors: capabilities that the neighboring cell supports
The default parameter value is set based on the general
Reason
configurations.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.30 F-DPCH Support Indicator

Full Name
F-DPCH Support Indicator
Abbreviated Name
fdpchSuptInd
Managed Object

3GPP Name
Cell Capability Container FDD
3GPP Reference
TS 25.423
Description
This parameter indicates whether the neighboring cell supports

F-DPCH.
Instance
RNC
ZWF23-01-041
0: Supported
1: Not Supported
Unit
N/A
Default Value
1: Not Supported
2-2675
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It should be set to "Supported" if the external neighbouring cell
supports F-DPCH.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.31 Neighboring Cell Enhanced F-DPCH Support Indicator

Full Name
Neighboring Cell Enhanced F-DPCH Support Indicator
Abbreviated Name
eFdpchSupInd
Managed Object

3GPP Name
3GPP Reference
TS 25.423
Description

Enhanced F-DPCH.
Instance
UTRAN Cell
2-2676
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF26-01-010
Enhanced F-DPCH
Enhanced F-DPCH FG
0: Supported
1: Not Supported
Unit
N/A
Default Value
1: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
supports Enhanced F-DPCH.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.32 MIMO Support Indicator

Full Name
MIMO Support Indicator
Abbreviated Name
mimoSuptInd
2-2677
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

MIMO or not.
Instance
RNC
ZWF26-01-003
HSDPA MIMO
HSDPA MIMO FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
supports.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2678
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.110.33 Mimo64Qam Support Indicator

Full Name
Mimo64Qam Support Indicator
Abbreviated Name
mimo64QamSuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the neighboring cell supports to

activate MIMO and downlink 64QAM at the same time.
Instance
RNC
ZWF26-02-001
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
supports MIMO and downlink 64QAM simultaneously.
N/A
Reason
Change Take Effect
New Connection
No
0
2-2679
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.34 64QAM DL Support Indicator

Full Name
64QAM DL Support Indicator
Abbreviated Name
dl64QamSuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

downlink 64QAM or not. When 64QAM is used, downlink capacity
can be improved.
Instance
RNC
ZWF26-01-001
64QAM for HSDPA
64QAM for HSDPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
2-2680
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
supports 64QAM.
cell of DRNC actually supports 64QAM. DRNC neighboring cell can
use 64QAM only when the swith is opened.
Reason
according to the actual DL 64QAM capability of the neighboring

cell of DRNC.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.35 Adjacent Cell Uplink Enhanced Layer 2 Support Indicator

Full Name
Adjacent Cell Uplink Enhanced Layer 2 Support Indicator
Abbreviated Name
adjImpUL2SuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the adjacent cell supports the

Uplink Enhanced Layer 2 function or not. Uplink Enhanced Layer 2
function introduced flexible RLC PDU size and MAC segmentation,
which can reduce overhead of head and filling bits, improve
efficiency of uplink high speed data tranmission and support higher
data rate.
Instance
External UTRAN Cell

2-2681
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF26-02-002
HSPA Enhanced L2 FG
0: Not Support
1: Support
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether the adjacent cell
supports the uplink enhanced layer 2 function or not.

Related Factor: the configuration of adjacent cell for the support of
uplink enhanced layer 2 function.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.36 Flexible MAC-d PDU Size Support Indicator

Full Name
Flexible MAC-d PDU Size Support Indicator

2-2682
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
flexMacdSuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the neighboring cell over Iur

supports flexible MAC-d PDU Size, and should be set to the flexible
MAC-d PDU Size capability of the neighboring cell in C-RNC.
Instance
RNC
ZWF26-01-002
HSPA Enhanced L2 FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: whether the neighboring cells of DRNC support
flexible MAC-d PDU Size.

Related factors: flexible MAC-d PDU Size capability of the cell in
C-RNC.
Effect: This parameter indicates whether the neighboring cells of
DRNC support flexible MAC-d PDU Size, and should be set to the
flexible MAC-d PDU Size capability of the cell in C-RNC.
Adjustment suggestion: This parameter should be set to the flexible
MAC-d PDU Size capability of the cell in C-RNC.
The default value is "0: Not Supported". This parameter should be
Reason
set based on the requirements of the operator.
Change Take Effect
No
2-2683
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.37 Dual-Cell HS-DSCH Support Indication

Full Name
Dual-Cell HS-DSCH Support Indication
Abbreviated Name
iurDcHsdsSuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether Dual-Cell HS-DSCH is supported

by the neighboring cell over Iur, and should be set to the Dual-Cell
HS-DSCH capability of the neighboring cell in C-RNC.
Instance
External UTRAN Cell
ZWF26-02-004
DC-HSDPA
DC-HSDPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
2-2684
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
Yes
Parameter function: whether the neighboring cell over Iur supports
Dual-Cell HS-DSCH.
Related factors: Dual-Cell HS-DSCH capability of the cell in C-RNC.
Effect: This parameter indicates whether the neighboring cell over
Iur supports Dual-Cell HS-DSCH, and should be set to the Dual-Cell
HS-DSCH capability of the cell in C-RNC.
Adjustment suggestion: This parameter should be set to the
Dual-Cell HS-DSCH capability of the cell in C-RNC.
The default parameter value is set based on the DC-HSDPA
Reason
capability in C-RNC of the cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.38 Primary CPICH Power Configuration Tag

Full Name
Primary CPICH Power Configuration Tag
Abbreviated Name
pcpichPwrPre
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether PCPICH transmit power is

configured.
Instance
External UTRAN Cell
ZWF21-03-006
2-2685
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether the PCPICH
transmit power of a neighboring cell is configured.

Related factors: whether the path loss of a neighboring cell needs to
be calculated for intra-frequency or inter-frequency measurement.
If the path loss of a neighboring cell needs to be calculated for
intra-frequency or inter-frequency measurement, "Cell info" IE of
intra-frequency or inter-frequency measurement should include the
PCPICH transmit power of this neighboring cell, and this parameter
should be "True".
If the path loss of a neighboring cell does not need to be calculated
for intra-frequency or inter-frequency measurement, "Cell info"
IE of intra-frequency or inter-frequency measurement should not
include the PCPICH transmit power of this neighboring cell, and
this parameter should be "False".
Adjustment suggestion: At present the path loss of a neighboring cell
does not need to be calculated for intra-frequency or inter-frequency
measurement, so that this parameter does not need to be adjusted.
Reason
planning and optimization engineer according to actual conditions.

At present, the path loss of neighboring cells does not need to be
calculated for intra-frequency or inter-frequency measurement, so
that the default value of this parameter is "False".
Change Take Effect
No
2-2686
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.39 Cell Description Type

Full Name
Cell Description Type
Abbreviated Name
cellDescripType
Managed Object

3GPP Name
Geographical Area
3GPP Reference
TS 25.331;
TS 25.413
Description
Cell description type, which indicates the type to describe the

cell, can be type of "polygon" or "arch", or "cell center + cell
radius". When RNC receives the message of RANAP LOCATION
REQUEST from CN, which requires reporting the location results
with Geographical Area (GA) of the cell, this parameter decides how
to fill in the location results in RANAP LOCATION REPORT.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
0: Center Point with Altitude and Cell Radius

1: Polygon
2: Arc
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2687
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It is usually configured by 0.
Configure according anteType default Value.If auctorial cell is set
Reason
beam antenna, the parameter is configured 1.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.40 Polygon Point Number

Full Name
Polygon Point Number
Abbreviated Name
polygonPointNum
Managed Object

3GPP Name
Polygon->Geographical Coordinates
3GPP Reference
TS 25.413
Description
This parameter identifies how many points should be included in the

polygon of the cell. If the cell is described in type of "polygon", the
best number of points is decided during network planning. Each cell
is described with its own number of points.
Instance
External UTRAN Cell
ZWF21-10-001
2-2688
SJ-20141209142030-013|2015-11-12 (R1.3)
Location Service FG
3.. MAX_POINT_NUM
And, MAX_POINT_NUM=15
Unit
N/A
Default Value
N/A
Related Parameters
PolygonPointNum, PolyLatitudeSign[15], PolyLatitude[15],

PolyLongitude[15], CellDescripType
1)PolyLatitudeSign[15], PolyLatitude[15], PolyLongitude[15] are List,
Parameters
the maximum number is 15.PolygonPointNum indicates the valid list

length of PolyLatitudeSign[15], PolyLatitude[15], PolyLongitude[15].
2) only when CellDescripType is set 1 (Polygon) , the values
of parameters PolygonPointNum, PolyLatitudeSign[15],
PolyLatitude[15], PolyLongitude[15]are valid.
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It is configured according to cell condition.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2689
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.41 Polygon Point Latitude Sign

Full Name
Polygon Point Latitude Sign
Abbreviated Name
polyLatitudeSign
Managed Object

3GPP Name
Geographical Coordinates >Latitude Sign
3GPP Reference
TS 25.413
Description
This parameter indicates the latitude direction of the polygon

point. When RNC receives the message of RANAP LOCATION
REQUEST from CN, which requires reporting the location result
with Geographical Area (GA) of the cell, if the cell is described in
type of "polygon", this parameter decides how to fill in the location
results in RANAP LOCATION REPORT. This parameter is one of
the parameters to describe the cell in type of "polygon".It indicates
whether the latitude direction of the polygon point is south or north.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
0: North
1: South
Unit
N/A
Default Value
N/A
Related Parameters

Parameters

Data Type
long[DBS_RR_MAX_POINT_NUM]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2690
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.42 Degree of Polygon Point Latitude

Full Name
Degree of Polygon Point Latitude
Abbreviated Name
polyLatitude
Managed Object

3GPP Name
Geographical Coordinates > Degrees Of Latitude
3GPP Reference
TS 25.413
Description
This parameter indicates the absolute value of the polygon point

latitude. When RNC receives the message of RANAP LOCATION
the geographical latitude of the polygon point.
Instance
External UTRAN Cell
ZWF21-10-001
2-2691
SJ-20141209142030-013|2015-11-12 (R1.3)
Location Service FG
OMCR: (0.. 90), step 1"; RNC: 0..2^23-1

When the value configed with OMCR is 90, the value in RNC is
2^23-1.
Unit
Degree
Default Value
N/A
Related Parameters
PolygonPointNum of UtranCell/externalUtranCell, PolyLatitudeSign[MAX_POINT_NUM] of UtranCell/externalUtranCell,

PolyLatitude[MAX_POINT_NUM] of UtranCell/externalUtranCell,
PolyLongitude[MAX_POINT_NUM] of UtranCell/externalUtranCell,
CellDescripType of UtranCell/externalUtranCell
N/A
Parameters
Data Type
double[DBS_RR_MAX_POINT_NUM]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
This parameter is not used in current SW version
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.43 Degrees of Polygon Point Longitude

2-2692
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Degrees of Polygon Point Longitude
Abbreviated Name
polyLongitude
Managed Object

3GPP Name
Geographical Coordinates > Degrees Of Longitude
3GPP Reference
TS 25.413
Description
This parameter indicates the value of the polygon point longitude.

When RNC receives the message of RANAP LOCATION
the parameters to describe the cell in type of "polygon", indicating
the geographical longitude of the polygon point.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (-180.. 180), step 1"; RNC: 0..2^24-1

When the value configed with OMCR is 180, the value of RNC
is 2^24-1 .
Unit
Degree
Default Value
N/A
Related Parameters

Parameters

Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2693
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.44 Latitude Sign for Cell Center

Full Name
Latitude Sign for Cell Center
Abbreviated Name
latitudeSign
Managed Object

3GPP Name
3GPP Reference
TS 25.413
Description

REQUEST from CN, which requires reporting the location result with
Geographical Area (GA) of the cell, if the cell is described in type of
"cell center + cell radius", this parameter decides how to fill in the
location results in RANAP LOCATION REPORT.This parameter
indicates the latitude direction of the cell center. This parameter is
one of the parameters to describe the cell in type of "cell central
point".It indicates whether the latitude direction of the cell center is
south or north.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
2-2694
SJ-20141209142030-013|2015-11-12 (R1.3)
0: North
1: South
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.45 Degree of Latitude for Cell Center

Full Name
Degree of Latitude for Cell Center
Abbreviated Name
latitude
Managed Object

3GPP Name
2-2695
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.413
Description

with Geographical Area (GA) of the cell, if the cell is described
in type of "cell center + cell radius", this parameter decides how
to fill in the location results in RANAP LOCATION REPORT. This
parameter is one of the parameters to describe the cell in type of
"cell center + cell radius".This parameter indicates the absolute
value of the latitude degree for the cell center. This parameter is one
of the parameters to describe the cell in type of "cell central point".It
indicates the geographical latitude of the cell center.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0.. 90), step 1"

RNC: 0.. 2^23-1
When the value configed with OMCR is 90, the value of RNC is
2^23-1.
Unit
Degree
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-2696
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.110.46 Degrees of Longitude for Cell Center

Full Name
Degrees of Longitude for Cell Center
Abbreviated Name
longitude
Managed Object

3GPP Name
3GPP Reference
TS 25.413
Description

location results in RANAP LOCATION REPORT. This parameter is
one of the parameters to describe the cell in type of "cell center
+ cell radius".This parameter indicates the absolute value of the
latitude degree for the cell center.
This parameter indicates the value of the longitude degree for the
cell center. This parameter is one of the parameters to describe
the cell in type of "cell central point".It indicates the geographical
longitude of the cell center.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (-180.. 180), step 1"

RNC: 0..2^24-1
2^24-1
Unit
Degree
Default Value
N/A
2-2697
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.47 Cell Altitude for Cell Center

Full Name
Cell Altitude for Cell Center
Abbreviated Name
altitude
Managed Object

3GPP Name
Altitude
3GPP Reference
TS 25.413
2-2698
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the altitude direction of the polygon

one of the parameters to describe the cell in type of "cell center +
cell radius".It indicates the altitude for the cell center.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
(0..2^15-1)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2699
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.110.48 Direction of Altitude for Cell Center

Full Name
Direction of Altitude for Cell Center
Abbreviated Name
altitudeDir
Managed Object

3GPP Name
Direction of Altitude
3GPP Reference
TS 25.413
Description

+ cell radius".It indicates whether the altitude direction of the cell
center is above or below the sea level.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
0: Height
1: Depth
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2700
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.49 Altitude accuracy

Full Name
Altitude accuracy
Abbreviated Name
altitudeAcc
Managed Object

3GPP Name
Vertical Accuracy Code
3GPP Reference
TS 25.413
Description

cell radius", indicating the altitude accuracy.
Instance
External UTRAN Cell
ZWF21-10-001
2-2701
SJ-20141209142030-013|2015-11-12 (R1.3)
Location Service FG
(0..990)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.50 Altitude accuracy Code

Full Name
Altitude accuracy Code
Abbreviated Name
uncertAltitude
Managed Object

3GPP Name
N/A
2-2702
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
Altitude accuracy Code of cell
Instance
UTRAN Cell Related
ZWF21-10-001
Location service FG
0..127
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
configuration according the actual location information of the cell.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.110.51 Confidence
2-2703
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Confidence
Abbreviated Name
confidence
Managed Object

3GPP Name
Confidence
3GPP Reference
TS 25.413
Description

cell radius". indicating the confidence of the position information.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
(0..100)%, step 1%
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It is configured according to cell condition.The Larger the value is,
the confidence the result is.
N/A
Reason
Change Take Effect
No
2-2704
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.52 Cell Radius

Full Name
Cell Radius
Abbreviated Name
cellRadius
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.413
Description
This parameter is one of the parameters to describe the cell in type

of "cell center + cell radius", indicating the cell radius. It takes the
cell center transmission antenna as the circle center.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
(0..1806627)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2705
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.53 Horizontal Accuracy Code

Full Name
Horizontal Accuracy Code
Abbreviated Name
uncertCode
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When UE maitain in a cell and RNC report cell the UE's Location
based on CELLID position method, this parameter indicates the
horizontal accuracy of the UE's position.
Instance
UTRAN Cell Related
ZWF21-10-001
Location service FG
0..127
Unit
N/A
Default Value
N/A
2-2706
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.110.54 Antenna Type

Full Name
Antenna Type
Abbreviated Name
anteType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the type of the transmission antenna in

the cell
Instance
External UTRAN Cell
2-2707
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-10-001
Location Service FG
0: Omni Antenna
1: Beam Antenna
Unit
N/A
Default Value
0: Omni Antenna
Related Parameters
AnteType, OffsetAngle, InnerAngle
Only when AnteType is 1 (Beam Antenna), OffsetAngle/InnerAngle
Parameters
are Valid
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
because most cell is set Omni Antenna, so this parameter is default
Reason
configured 0.If auctorial cell is set beam antenna, the parameter

is configured 1.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.55 Antenna Latitude Sign

Full Name
Antenna Latitude Sign
2-2708
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
anteLatitudeSign
Managed Object

3GPP Name
3GPP Reference
TS 25.413
Description
This parameter indicates the latitude direction of the transmission

antenna is south or north.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
0: North
1: South
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2709
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.110.56 Degree of Antenna Latitude

Full Name
Degree of Antenna Latitude
Abbreviated Name
anteLatitude
Managed Object

3GPP Name
Geographical Coordinates >Latitude
3GPP Reference
TS 25.413
Description
This parameter indicates the geographical latitude coordinates of

the transmission antenna in the cell.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0.. 90), step 1"

RNC: 0..2^23-1
2^23-1 .
Unit
Degree
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
2-2710
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.57 Degrees of Antenna Longitude

Full Name
Degrees of Antenna Longitude
Abbreviated Name
anteLongitude
Managed Object

3GPP Name
3GPP Reference
TS 25.413
Description
This parameter indicates the longitude of the transmission antenna

in the cell
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (-180.. 180), step 1"

RNC: 0..2^24-1
is 2^24-1 .
Unit
Degree
Default Value
N/A
Related Parameters
N/A
2-2711
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.58 Antenna Altitude

Full Name
Antenna Altitude
Abbreviated Name
anteAltitude
Managed Object

3GPP Name
Altitude
3GPP Reference
TS 25.413
Description
This parameter indicates the altitude of the transmission antenna

in the cell.
Instance
External UTRAN Cell
ZWF21-10-001
2-2712
SJ-20141209142030-013|2015-11-12 (R1.3)
Location Service FG
(0..2^15-1)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.59 Direction of Antenna Altitude

Full Name
Direction of Antenna Altitude
Abbreviated Name
anteAltitudeDir
Managed Object

2-2713
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
3GPP Reference
TS 25.413
Description
Direction of Antenna Altitude. This parameter indicates the altitude

of the transmission antenna of the cell is above or below the level.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
0: Height
1: Depth
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2714
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.60 Offset Angle

Full Name
Offset Angle
Abbreviated Name
offsetAngle
Managed Object

3GPP Name
Offset angle
3GPP Reference
TS 25.413;
TS 25.453
Description

cell radius".This parameter is the offset angle of the transmission
antenna in the cell, which indicates the cells offset degree based on
the north direction.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0..360), step 1; RNC: (0..360)
Unit
Degree
Default Value
N/A
Related Parameters
Parameters
are Valid
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
2-2715
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.61 Inner Angle

Full Name
Inner Angle
Abbreviated Name
innerAngle
Managed Object

3GPP Name
Inner Angle
3GPP Reference
TS 25.453
Description

"cell center + cell radius".This parameter indicates the inner angel of
the transmission antenna of the cell.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0..360), step 1; RNC: (0..360)
Unit
Degree
2-2716
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
N/A
Related Parameters
Parameters
are Valid
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It is related with the positioning function, and is used in Cell ID/Cell
ID+RTT survey, the measurement result is returned to CN. It is

configured according to cell condition.The wider the interior corner
is, the larger cell coverage is.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.62 Switch of CS 64kbps Establishment for External UTRAN

Cell
Full Name
Switch of CS 64kbps Establishment for External UTRAN Cell
Abbreviated Name
adjCs64Switch
Managed Object

3GPP Name
N/A
2-2717
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates whether the external cell allows the

accessing of traffic of CS 64kbps. If this switch is "Off", the traffic
cannot be accessed. If this switch is "On", the traffic can be
accessed.
Instance
UTRAN Cell and PLMN
ZWF21-05-016
Video Call Prohibited in Specific Area
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets whether to allow the CS 64 kbps service
to be established in external UTRAN cells.

Configuration rule: If the switch is on, the CS 64 kb service can
be established, which improves the user experience, but occupies
many radio resources.
If the switch is off, the the CS 64 kb service cannot be established.
If the operator doesn't wish to establish the video service in some
special scenarios, for example, bathroom, the function must be
disabled.
The default value is set to on to provide a better user experience.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
2-2718
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.110.63 DeltaQrxlevmin in SIB11 Configuration Tag

Full Name
DeltaQrxlevmin in SIB11 Configuration Tag
Abbreviated Name
deltaQrxlevminPr
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.304
Description
This parameter indicates whether to set DeltaQrxlevmin for a

neighboring cell in SIB11. If this parameter is set to 1, the actual
value of Qrxlevmin = Qrxlevmin + DeltaQrxlevmin.
Instance
External UTRAN Cell
ZWF21-03-005
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2719
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: DeltaQrxlevmin in SIB11 configuration tag

If the parameter is set to True, the actual value of Qrxlevmin =
Qrxlevmin + DeltaQrxlevmin, which means that the coverage of the
cell is extended, but the call success rate for users at the edge of
the cell may be affected.
Reason
of a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.64 TUTRAN-GPS Measurement Support Indicator

Full Name
TUTRAN-GPS Measurement Support Indicator
Abbreviated Name
utranGpsSptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports TUTRAN-GPS

common measurement. If the parameter is set to "Not Supported",
the cell is not permitted to originate GPS measurement. If it is set to
"Supported", the cell is permitted.
Instance
External UTRAN Cell
N/A
2-2720
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0: Not Supported
1: Supported
Unit
N/A
Default Value
Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
This parameter is not used in the current SW version.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.65 Support SRNC-NODEB HS-DSCH Congestion Detection

Indicator
Full Name
Support SRNC-NODEB HS-DSCH Congestion Detection Indicator
Abbreviated Name
hsdschSuptCgtDetInd
2-2721
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
In HS-DSCH congestion control, the SRNC detects congestion

(such as packet loss) in the downlink transport network between
the SRNC and the NodeB for a PS service over HS-DSCH. If
downlink congestion is detected, the SRNC will adjust the downlink
throughput by controlling the service rate. After the transport
network is relieved, the SRNC controls the service rate to recover
the downlink throughput. The HS-DSCH congestion control function
allows the SRNC to adjust the downlink throughput in time when
detecting downlink traffic fluctuation in the transport network to avoid
a continuous decline in service quality due to network congestion.
This parameter determines whether to enable the HS-DSCH
congestion control function between the RNC and the NodeB that
includes the external cell. This function can be enabled when the
downlink packet loss ratio is high in the transport network between
the RNC and the NodeB.
Instance
External UTRAN Cell
ZWF23-05-002
HSDPA Flow Control
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2722
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter can be set to "Supported" for an external cell when
the following conditions are met:

1: The NodeB that includes the external cell supports the HS-DSCH
congestion control function.
2: The parameter UExternalUtranCellFDD.timeDelay is configured
to an appropriate value that matches the transport delay between
the SRNC and the NodeB.
If the parameter is set to "Supported" for an external cell, the Iur
HS-DSCH service rate will be controlled when congestion occurs
in the transport network between the SRNC and the NodeB that
includes the external cell.
This function can be enabled for an external cell when the downlink
packet loss ratio is high in the transport network between the RNC
and the NodeB that includes the external cell.
The default is set to "Not Supported" because the HS-DSCH
Reason
congestion control function is not stable in most external UTRAN

cells.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.66 Support SRNC-NODEB E-DCH Congestion Detection

Indicator
Full Name
Support SRNC-NODEB E-DCH Congestion Detection Indicator
Abbreviated Name
edchSuptCgtDetInd
Managed Object

3GPP Name
N/A
2-2723
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
In E-DCH congestion control, the SRNC detects congestion (such

as packet loss) in the uplink transport network between the SRNC
and the NodeB for a packet service over E-DCH. When transmission
network congestion is either detected or relieved, the rate control of
the service may try to be performed to adjust the uplink throughput.
The E-DCH congestion control function allows the RNS to adjust the
uplink throughput in time when detecting uplink traffic fluctuation
in the transport network to avoid a continuous decline in service
quality due to network congestion.
This parameter determines whether to enable the E-DCH congestion
control function between the RNC and the NodeB that includes the
external cell. This function can be enabled when the uplink packet
loss ratio is high in the transport network between the RNC and
theNodeB.
Instance
External UTRAN Cell
ZWF25-05-004
HSUPA Flow Control
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter can be set to "Supported" for an external cell when
the following conditions are met:

1: The NodeB that includes the external cell supports the E-DCH
congestion control function.
2: The parameters UExternalUtranCellFDD.timeDelay and
UExternalUtranCellFDD.timeDelayJitter are configured to
appropriate values that match the transport delay and the transport
delay jitter between the SRNC and the NodeB.
If the parameter is set to "Supported" for an external cell, the Iur
E-DCH service rate will be controlled when uplink congestion occurs
2-2724
SJ-20141209142030-013|2015-11-12 (R1.3)
in the transport network between the SRNC and the NodeB that
includes the external cell.
This function can be enabled for an external cell when the uplink
packet loss ratio is high in the transport network between the RNC
and the NodeB that includes the external cell.
The default is set to "Not Supported" because the E-DCH congestion
Reason
control function is not stable in most external UTRAN cells.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.67 2ms E-TTI Support Indicator

Full Name
2ms E-TTI Support Indicator
Abbreviated Name
edchTti2SuptInd
Managed Object

3GPP Name
3GPP Reference
TS 25.423
Description
This parameter indicates whether the neighboring cell supports an

E-DCH TTI of 2 ms. Compared with an E-DCH TTI of 10 ms, an
E-DCH TTI of 2 ms can support a higher data rate and a shorter
delay, but has a smaller coverage radius.
Instance
External UTRAN Cell
ZWF25-01-024
ZWF25-01-033

Adaptive HSUPA TTI
2-2725
SJ-20141209142030-013|2015-11-12 (R1.3)

0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates whether the DRNC
neighboring cell supports an E-DCH TTI of 2 ms.

Configuration rule: This parameter must be configured in
accordance with the actual E-TTI of the DRNC neighboring cell.
The DRNC neighboring cell can use 2 ms E-TTI only when this
parameter is set to Supported.
By default, the DRNC neighboring cell does not support an E-TTI of
Reason
2 ms. This parameter can be modified in accordance with the actual

E-TTI capability of the DRNC neighboring cell.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.68 E-DCH SF Capability

2-2726
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
E-DCH SF Capability
Abbreviated Name
edchSfCap
Managed Object

3GPP Name
3GPP Reference
TS 25.423
Description
This parameter indicates the E-DCH spreading factor capability of

the neighboring cell, which is used to indicate whether it supports
2sf2+2sf4, 2sf2, 2sf4, sf4, sf8 and the inferior SFs.
Instance
External UTRAN Cell
ZWF25-01-A
(SF8[0], SF4[1], 2SF4[2], 2SF2[3], 2SF2 and 2SF4[4])
Unit
N/A
Default Value
2SF2 and 2SF4
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: The parameter indicates the E-DCH SF capability of the
neighboring cell of DRNC.

Configuration Rule: It should be set according to the actual E-DCH
SF capability of the neighboring cell of the DRNC.
Default value is set to "2SF2 and 2SF4", which should be adjusted
Reason
according to the actual E-DCH SF capability of the neighboring cell

of DRNC.
Change Take Effect
New Connection
No
How to Impact
N/A
2-2727
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.110.69 E-DCH HARQ Combining Capability

Full Name
E-DCH HARQ Combining Capability
Abbreviated Name
edchHarqCombCap
Managed Object

3GPP Name
3GPP Reference
TS 25.423
Description
The parameter indicates the E-DCH HARQ combining capability

of the neighboring cell, which indicates whether it supports chase
combining, or increamental redundancy or both.
Instance
External UTRAN Cell
ZWF25-01-A
0: IR Combining Capable
1: Combining Capable
2: IR and Chase Combining Capable
Unit
N/A
Default Value
IR and Chase Combining Capable
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2728
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: The parameter indicates the E-DCH HARQ combining
capability of the neighboring cell of DRNC.

Configuration Rule: It should be set according to the actual HARQ
combining capability of the neighboring cell of the DRNC.
Default value is set to "IR and Chase Combining Capable", which
Reason
should be adjusted according to the actual E-DCH HARQ combining

capability of the neighboring cell of DRNC.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.70 Max UE DTX Cycle

Full Name
Max UE DTX Cycle
Abbreviated Name
maxDtxCyc
Managed Object

3GPP Name
Max UE DTX Cycle
3GPP Reference
TS 25.423
Description
This parameter indicates the maximum UE DTX cycle supported by

the neighboring cell for continuous packet connectivity DTX-DRX
operation.
Instance
RNC
ZWF26-01-007
UL DTX
(5, 10, 20, 40, 64, 80, 128, 160) subframes

2-2729
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
160 subframes
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: The parameter indicates the Max UE DTX Cycle capability
of the neighboring cell of DRNC.

Configuration Rule: It should be set according to the actual Max UE
DTX Cycle capability of the neighboring cell of the DRNC.
Default value is set to "160 subframes", which should be adjusted
Reason
according to the actual Max UE DTX Cycle capability of the

neighboring cell of DRNC.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.71 CPC DTX-DRX Support Indicator

Full Name
CPC DTX-DRX Support Indicator
Abbreviated Name
cpcDtxDrxSuptInd
Managed Object

3GPP Name
continuous Packet Connectivity DTX-DRX Support Indicator

2-2730
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423
Description
This parameter indicates whether continuous packet connectivity

DTX-DRX operation is supported by the neighboring cell or not. The
usage of DTX and DRX can reach the goal of improving system
capacity by reducing the efficiency of power control.
Instance
NE Office
ZWF26-01-007
ZWF26-01-008
UL DTX
DL DRX
0: Not Support
1: Support
Unit
N/A
Default Value
Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
supports CPC DTX-DRX.

cell of DRNC actually supports CPC DTX-DRX. DRNC neighboring
cell can use DTX/DRX only when this parameter is set as
'Supported'.
Default value is set to "Support", which should be adjusted according
Reason
to the actual CPC DTX-DRX capability of the neighboring cell of

DRNC.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-2731
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.110.72 CPC HS-SCCH less Support Indicator

Full Name
CPC HS-SCCH less Support Indicator
Abbreviated Name
cpcHslessSuptInd
Managed Object

3GPP Name
continuous Packet Connectivity HS-SCCH less Support Indicator
3GPP Reference
TS 25.423
Description
This parameter indicates whether continuous packet connectivity

HS-SCCH less operation is supported by the neighboring cell or
not.HS-SCCH Less can reduce control overhead of HS-SCCH in
order to improve capacity and reduce the delay of HSDPA service.
Instance
NE Office
ZWF26-01-005
0: Not Support
1: Support
Unit
N/A
Default Value
Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2732
SJ-20141209142030-013|2015-11-12 (R1.3)
supports HS-SCCH less.

cell of DRNC actually supports HS-SCCH less.DRNC neighboring
cell can use HS-SCCH LESS only when this parameter is set as
'Supported'.
Reason
to the actual CPC DTX-DRX capability of the neighboring cell of

DRNC.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.73 Qqualmin in SIB12

Full Name
Qqualmin in SIB12
Abbreviated Name
qqualMinSib12
Managed Object

3GPP Name
Qqualmin
3GPP Reference
TS 25.331;
TS 25.304
Description
This parameter indicates the minimum required quality of a cell for a

UE to camp on. When the measurement quantity is CPICH Ec/No, a
cell can be selected by a UE as the target cell only when Qqualmeas
of the cell exceeds Qqualmin. This parameter is broadcast in SIB12.
Instance
External UTRAN Cell
ZWF21-03-005
2-2733
SJ-20141209142030-013|2015-11-12 (R1.3)
OMCR: (-24..0)dB, step 1dB
Unit
dB
Default Value
-18dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: minimum required quality of a cell (broadcast
in SIB12) for a UE to camp on

Related factors: difficulty of reselecting a neighboring RNC's cell,
coverage of the cell
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

2-2734
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Qrxlevmin in SIB12
Abbreviated Name
qrxlevMinSib12
Managed Object

3GPP Name
Qrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description

broadcast in SIB12.
Instance
External UTRAN Cell
ZWF21-03-005
Unit
dBm
Default Value
-115dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Related factors: coverage of a neighboring RNC's cell
Reason
Change Take Effect
No
2-2735
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
deltaQrxlevminSib12Pr
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.304
Description

neighboring cell in SIB12. If this parameter is set to 1, the actual
Instance
External UTRAN Cell
ZWF21-03-005
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-2736
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No

Reason
of a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
deltaQrxlevminSib12
Managed Object

3GPP Name
DeltaQrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description

DeltaQrxlevmin.
2-2737
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
External UTRAN Cell
ZWF21-03-005
Unit
dB
Default Value
-2dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

The smaller the parameter value is, the larger the range of
Qrxlevmin is, and the easier it is to fulfill the cell reselection criterion,
and vice versa. But when the parameter is set to a small value, the
call success rate for users at the edge of the cell may be affected.
Reason
of a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2738
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.77 Transport Time Delay

Full Name
Transport Time Delay
Abbreviated Name
timeDelay
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The transport network delay between the SRNC and the related
DRNS NodeB including the external adjacent cell influences the
quality of service, such as the downlink throughput.
This parameter indicates the transport network delay between the
SRNC and the related DRNS NodeB including the external adjacent
cell.
Instance
External UTRAN Cell
ZWF21-03-006
ZWF22-01-006
ZWF22-01-004

Handover Control FG
(20[0], 100[1], 400[2])ms
Unit
ms
Default Value
20[0]
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2739
SJ-20141209142030-013|2015-11-12 (R1.3)
transport network delay between the SRNC and the related DRNS
NodeB including the external adjacent cell.
If the value is too large, some transport network faults may be
detected much later and the quality of service will decline.
If the value is too small, some transport network faults may be
detected much earlier and the quality of service will decline.
If the transport network delay is improperly configured for the NodeB
and DRNS, a wrong soft/hard handover decision may be made, and
the quality of service will decline.
Reason
Change Take Effect
Yes
How to Impact
If the value of the parameter is configured too large or too little

, Some processes may be performed inaccuratly such as the
congestion detection on E-DCH , FP Node synchronization, FP
transport channel synchronization.
Access
Read/Write
OMC Access path
N/A
N/A
2.110.78 Transport Time Delay Jitter

Full Name
Transport Time Delay Jitter
Abbreviated Name
timeDelayJitter
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2740
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
The transport network delay jitter between the SRNC and the related
DRNS NodeB including the external adjacent cell influences the
TOAWS of the Iur service over DL DCH/HS-DSCH, influences the
E-DCH transport congestion detect of the Iur service over E-DCH
and influences the quality of Iur service.
This parameter indicates the transport delay jitter between the SRNC
and the related DRNS NodeB including the external adjacent cell.
Instance
External UTRAN Cell
ZWF22-01-006
ZWF22-01-004
Unit
ms
Default Value
5ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
transport network delay jitter between the SRNC and the related
DRNS NodeB including the external adjacent cell.
If the value is too small, the probability that downlink Iur DCH data
is successfully sent on the Uu interface will be decreased, and the
quality of service will decline. On the other hand, some transport
network faults may be detected much earlier and the quality of
service will decline.
If the value is too large, Iur DCH data will be stored in the DRNS
NodeB for a long time, and the delay of service will be increased.
For example, the delay of signaling and/or service data over
downlink DCH will be greatly increased. On the other hand, some
transport network faults may be detected much later and the quality
of service will decline.
2-2741
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.79 Maximum Bit Rate on DL DCH for NRT PS RAB in External

UTRAN Cell
Full Name
Maximum Bit Rate on DL DCH for NRT PS RAB in External UTRAN

Cell
Abbreviated Name
nrtMaxDlRateDchD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate on DL DCH allowed

in External UTRAN cell for an NRT PS domain RAB.
Instance
UTRAN Cell and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
2-2742
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate of downlink DCH for
NRT PS RAB in external UTRAN cells.

Related factors: transmission bandwidth of the Iur interface, the
user experience and the successful call ratio.
The parameter is used in a scenario that the lur interface has
very limited transmission bandwidth of Iur to avoid affecting user
experience because of some users high bit rate in the same cell.
maximum rate can be faster, which improves the user experience,
but it may affect other userstraffic quality.
If this parameter is set to a smaller value, the maximum rate is
slower, and the successful call ratio is also higher, but the user
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.80 Maximum Bit Rate on UL DCH for NRT PS RAB in External

UTRAN Cell
2-2743
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Maximum Bit Rate on UL DCH for NRT PS RAB in External UTRAN

Cell
Abbreviated Name
nrtMaxUlRateDchD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate on UL DCH allowed

in External UTRAN cell for an NRT PS domain RAB.
Instance
UTRAN Cell and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate of uplink DCH for
NRT PS RAB in external UTRAN cells.

The parameter is used in a scenario that the lub interface has very
limited transmission bandwidth to avoid affecting user experience
because of some users high bit rate in the same cell.
but it may affect other users traffic quality.
2-2744
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set to provide a better user experience.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.81 Maximum Bit Rate on DL DCH for RT PS RAB in External

UTRAN Cell
Full Name
Maximum Bit Rate on DL DCH for RT PS RAB in External UTRAN

Cell
Abbreviated Name
rtMaxDlRateDchD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate on DL DCH allowed

in External UTRAN Cell for an RT PS domain RAB.
Instance
UTRAN Cell and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
2-2745
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate of downlink DCH for
RT PS RAB in external UTRAN cells.

The parameter is used in a scenario that the lur interface has very
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.82 Maximum Bit Rate on UL DCH for RT PS RAB in External

UTRAN Cell
2-2746
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Maximum Bit Rate on UL DCH for RT PS RAB in External UTRAN

Cell
Abbreviated Name
rtMaxUlRateDchD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate on UL DCH allowed

in External UTRAN Cell for an RT PS domain RAB.
Instance
UTRAN Cell and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate of uplink DCH for RT
PS RAB in external UTRAN cells.

If this parameter is set to a larger value, the maximum rate can be
faster, which improves the user experience, but it may affect other
users traffic quality.
maximum rate is slower, and the successful call ratio is also higher,
but the user experience is affected.
2-2747
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.83 Maximum Bit Rate on E-DCH for NRT PS RAB in External

UTRAN Cell
Full Name
Maximum Bit Rate on E-DCH for NRT PS RAB in External UTRAN

Cell
Abbreviated Name
nrtMaxRateEdchD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate on UL E-DCH

allowed in External UTRAN Cell for an NRT PS domain RAB.
Instance
UTRAN Cell and PLMN
ZWF25-01-A
ZWF26-03-004

DC-HSUPA
DC-HSUPA FG
(8, 16, 32, 64, 128, 144, 256, 384, 512, 711, 1024, 1399, 1448,
2048, 2886, 3072, 4096, 5760, 11520) kbps
2-2748
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
kbps
Default Value
5760 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate of E-DCH for NRT
PS RAB in external UTRAN cells.

Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2749
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.84 Maximum Bit Rate on E-DCH for RT PS RAB in External

UTRAN Cell
Full Name
Maximum Bit Rate on E-DCH for RT PS RAB in External UTRAN

Cell
Abbreviated Name
rtMaxRateEdchD
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate on UL E-DCH

allowed in External UTRAN Cell for an RT PS domain RAB.
Instance
UTRAN Cell and PLMN
ZWF25-01-A
(8, 16, 32, 64, 128, 144, 256, 384, 512, 711, 1024, 1399, 1448,
2048, 2886, 3072, 4096, 5760, 11520) kbps
Unit
kbps
Default Value
5760 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate of E-DCH for RT PS
RAB in external UTRAN cells.

2-2750
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.85 External UTRAN Cell Dual Cell+MIMO Support Indicator

Full Name
External UTRAN Cell Dual Cell+MIMO Support Indicator
Abbreviated Name
dCelDcMimoSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the external neighboring cells of

an RNC support simultaneous activation of Dual Cell and MIMO.
It is configured on an SRNC based on the "Cell Dual Cell+MIMO
Support Indicator" of the external cell of another RNC. The indicator
is used for the SRNC to obtain the external cell capability in an
Iur handover and determine whether to use DC+MIMO for the Iur
handover.
Instance
External UTRAN Cell
ZWF26-03-001
2-2751
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether the simultaneous activation
of the Dual Cell and MIMO functions is supported in a DRNC cell

on the SRNC.
Related factors: network layout, and HSDPA throughput of UEs.
When the parameter is set to "Supported", a DRNC cell supports
the function of activating Dual Cell and MIMO simultaneously in the
Radio Link Setup message or Radio Link Reconfiguration message
during the Iur handover, which can increase the HSDPA throughput
of UEs, otherwise, the DRNC cell does not support the function
during the Iur handover.
MimoSuptInd only indicates whether the DRNC cell supports the
MIMO function and IurDcHsdsSuptInd only indicates whether
the DRNC cell supports the Dual Cell function, but even both
parameters are set to "Supported", it does not mean that the DRNC
cell can activate the MIMO and Dual Cell functions in a radio link.
Reason
is not supported.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2752
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.110.86 Reserved Parameter 1 for External UTRAN Cell

Full Name
Reserved Parameter 1 for External UTRAN Cell
Abbreviated Name
aResPara1
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
2-2753
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara2
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
2-2754
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara3
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-2755
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara4
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..255
Unit
N/A
2-2756
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara5
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell

2-2757
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
0..255
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara6
Managed Object

2-2758
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..2^23-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2759
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
aResPara7
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..2^23-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2760
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara8
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..2^23-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
2-2761
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara9
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..2^23-1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-2762
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
aResPara10
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External UTRAN Cell
N/A
N/A
0..2^23-1
Unit
N/A
Default Value
Related Parameters
N/A
2-2763
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
reserved parameter
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.96 Sixteen QAM UL Support Indicator

Full Name
Sixteen QAM UL Support Indicator
Abbreviated Name
ul16QamSuppInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

uplink 16QAM or not. 16QAM can improve uplink system throughput.
Instance
External UTRAN Cell
ZWF26-01-004
2-2764
SJ-20141209142030-013|2015-11-12 (R1.3)
16QAM in HSUPA
16QAM for HSUPA FG
0: Not Support
1: Support
Unit
N/A
Default Value
0: Not Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
supports uplink 16QAM. And DRNC neighboring cell can use uplink
16QAM only when the parameter is set as "Supported".
Reason
according to whether UL 16QAM license of the cell is purchased

by the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.97 E-DPCCH Power Boosting Support Indicator

Full Name
E-DPCCH Power Boosting Support Indicator
Abbreviated Name
ePowBoostSuppInd
2-2765
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a neighboring cell supports the

E-DPCCH power boosting.
Instance
External UTRAN Cell
ZWF26-01-004
ZWF25-04-006
16QAM in HSUPA
16QAM for HSUPA FG

0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether a neighboring
cell supports the E-DPCCH power boosting.

Related factors: cell capabilities on the neighboring RNC side
This parameter must be configured according to the cell capabilities
Reason
on the neighboring RNC side.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2766
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.110.98 Cell MIMO Precoding Weight Set Restriction Support

Indicator
Full Name
Cell MIMO Precoding Weight Set Restriction Support Indicator
Abbreviated Name
adjPreCodeResInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether Precoding Weight Set Restriction

is supported by the neighbouring cell of the DRNC. Supporting
Precoding Weight Set Restriction also indicates VAM is supported.
Instance
UTRAN Cell
ZWF26-01-003
HSDPA MIMO
HSDPA MIMO FG
0: Not Support
1: Support
Unit
N/A
Default Value
0: Not Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2767
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: The parameter indicates whether the Iur neighbouring cell
supports the MIMO Precoding weight set restriction.

Configuration Rule: The parameter should be set according to
the MIMO Precoding weight set restriction capability of the Iur
neighbouring cell.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.99 Geographical Area Report Type

Full Name
Geographical Area Report Type
Abbreviated Name
gaRptType
Managed Object

3GPP Name
Geographical Area
3GPP Reference
TS 25.413
Description
This parameter indicates the geographical area report type of the

cell.when CN requires RNC to report the location result with the type
of Geographical Area (GA), this parameter decides the format of
the report in detail.
Instance
External UTRAN Cell
ZWF21-10-001
Location Service FG
2-2768
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Ellipsoid Point
1: Ellipsoid Point with Uncertainty Circle
2: Ellipsoid Point with Uncertainty Ellipse
3: Ellipsoid Point with Altitude
4: Ellipsoid Point with Altitude and Uncertainty Ellipsoid
5: List of Ellipsoid Points
6: Ellipsoid Arc
Unit
N/A
Default Value
N/A
Related Parameters
CellDescripType, GARptType
when CellDescripType set 0, GARptType can be set 0, 1, 2, 3, 4;
Parameters
when CellDescripType set 1, GARptType can be set 5;

Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

described according to actual cell condition.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.100 Classified Zone Indicator of DRNC cell

2-2769
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Classified Zone Indicator of DRNC cell
Abbreviated Name
adjClassZoneInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter identifies whether the local cell is the designated

zone or not.
Instance
External UTRAN Cell
ZWF21-10-004
Location Service FG
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
When UE is detected entering specific area from non-specific area,
or entering non-specific area from specific area, RNC refers the SAI
responding to the Cell-ID of current UE cell as positioning result,
and transmits location report to CN through Iu port.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2770
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.110.101 DB DC-HSDPA Support Indicator on Iur

Full Name
DB DC-HSDPA Support Indicator on Iur
Abbreviated Name
iurDbHsdSuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether DB DC-HSDPA is supported by

the cell under DRNC.
Instance
UTRAN Cell
ZWF26-03-002
Dual-Band DC-HSDPA
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
cell under DRNC. It is configured according to cell's capability. If the

cell under DRNC has DB DC-HSDPA capability, then this parameter
is set as "Supported"; otherwise, it is set as "Not Supported".
2-2771
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on cell capability of the DRNC,
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.102 Number of DB Secondary Serving Cell

Full Name
Number of DB Secondary Serving Cell
Abbreviated Name
dbSndSvrCelNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of DB Secondary Serving Cell

for the neighbor cell through the Iur interface.
Instance
External UTRAN Cell
ZWF26-03-002
Dual-Band DC-HSDPA
0..DBS_RR_MAX_NUM_HSDSCH_SNDCELL
DBS_RR_MAX_NUM_HSDSCH_SNDCELL=10.
Unit
N/A
Default Value
Related Parameters
IurDbHsdSuptInd
2-2772
SJ-20141209142030-013|2015-11-12 (R1.3)
if the value of IurDbHsdSuptInd is "False", this parameter is invalid
Parameters
for the correspongding Cell; else, this parameter must be set.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the used to indicate number of DB
secondary serving cell for the neighbor cell through the Iur interface.
Related factor: Set this parameter based on the number of DB
secondary serving cells.
This parameter is set based on the number of DB secondary serving
cells configured by the neighbor cell through the Iur interface.
The default value is set based on the number of DB secondary
Reason
serving cell configured by the neighbor cell through the Iur interface.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.103 DB Secondary Serving Cell ID

Full Name
DB Secondary Serving Cell ID
Abbreviated Name
dbSndCIdList
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2773
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter describes the DB Secondary Serving Cell ID for the

neighbor cell through the Iur interface.
MAX_NUM_DB_SECOND_CELL indicates the number of DB
Secondary Serving Cell for the neighbor cell through the Iur
interface, which is 4.
Instance
External UTRAN Cell
ZWF26-03-002
Dual-Band DC-HSDPA
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
IurDbHsdSuptInd
DbSndSvrCelNum
if the value of IurDbHsdSuptInd is "False", this parameter is invalid
Parameters
for the correspongding Cell; else, this parameter must be set, and
the valid element number is equal to DbSndSvrCelNum,
Data Type
long[DBS_RR_MAX_NUM_HSDSCH_SNDCELL]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the used to indicate DB secondary serving
cell ID for the neighbor cell through the Iur interface.

Related factor: Set this parameter based on DB secondary serving
cell.
This parameter is configured based on possible DB secondary
serving cell ID for the neighbor cell through the Iur interface.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2774
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.110.104 HSDPA Function Status

Full Name
HSDPA Function Status
Abbreviated Name
hsdStat
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell supports HSDPA, this parameter is used to activate

RAB. setup/configuration/handover on hsdpa channel. Modification
of this parameter has no effect on the delete or setup of the HSDPA
channel.
Instance
UtranCell
ZWF23-01-A
0: Inactive
1: Active
Unit
N/A
Default Value
Related Parameters
HspaSptMeth
hsuStat
When HspaSptMeth is set 1(Support HSDPA and DCH), 2(Support
Parameters
HSDPA only), 3(Support HSUPA , HSDPA and DCH), 4(Support

HSUPA and HSDPA), hsdStat is valid.
When the value of hsdStat is 0 (Inactive), the value of hsuStat must
be 0 (Inactive).
Data Type
long
Parameter Type
2-2775
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
This parameter is configured according to the actual net
planning.Only when the cell possesses the HSDPA capability, the

parameter is valid.
The parameter should be set based on the actual scene.
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.105 Number of SF=16 Used in HS-PDSCH

Full Name
Number of SF=16 Used in HS-PDSCH
Abbreviated Name
nbrCodHspdsch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of "SF=16" code words used

on HS-PDSCH.
Instance
RNC
N/A
N/A
N/A
1..15
2-2776
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.106 Number of SF=128 Used in HS-SCCH

Full Name
Number of SF=128 Used in HS-SCCH
Abbreviated Name
nbrCodHsscch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2777
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the number of "SF=128" code words used

on HS-SCCH.
Instance
RNC
N/A
N/A
N/A
1..32
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2778
SJ-20141209142030-013|2015-11-12 (R1.3)
2.110.107 DPCH STTD Indication of DRNC cell when UE actives the

MIMIO and uses P-CPICH and S-CPICH as phase reference
Full Name
DPCH STTD Indication of DRNC cell when UE actives the MIMIO

and uses P-CPICH and S-CPICH as phase reference
Abbreviated Name
dpSttdPSMimoInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the DRNC cell can activate

the STTD of downlink control channels (for example, HS-SCCH,
F-DPCH, E-AGCH, E-HICH, and E-RGCH) when the UE activates
the MIMO of P-CPICH and S-CPICH. It is set on SRNC for Iur
handover in accordance with the actual capability of the cell on
DRNC.
Instance
External UTRAN Cell
ZWF26-01-003
HSDPA MIMO
HSDPA MIMO FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It is a network planning parameter for lur
interface interconnection.
Related factors: the capability of the DRNC cell.
Switching on the STTD can save the transmission power of downlink
control channels, especially the HS-SCCH channel.
2-2779
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter is set based on the capability of DRNC cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.108 DC-HSUPA Support Indicator on Iur

Full Name
DC-HSUPA Support Indicator on Iur
Abbreviated Name
iurDcHsuSuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether DC-HSUPA is supported by the

cell under DRNC.
Instance
UTRAN Cell
ZWF26-03-004
DC-HSUPA
DC-HSUPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
2-2780
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether the cell on the DRNC side
supports DC-HSUPA.
Related factor: actual ability of the cell on the DRNC side.
If the cell on the DRNC side supports DC-HSUPA, set this parameter
to Supported.
If the cell on the DRNC side does not support DC-HSUPA, set this
parameter to Not Supported.
This parameter must be configured in accordance with the
Reason
DRNC-side cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.109 Separate Iur Transport Bearer Support Indicator

Full Name
Separate Iur Transport Bearer Support Indicator
Abbreviated Name
iurDcHsuTrModInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2781
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the Iur interface supports

Separate Transport Bearer.
If its value is "1: Supported" , the Mac-d flows from each carrier
uses different Iur transport bearers.
Instance
UTRAN Cell
ZWF26-03-004
DC-HSUPA
DC-HSUPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
1: Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the mode in which the dual-carrier
E-DCH transport bearer is multiplexed.

Related factor: capability of the transport bearer.
When the parameter is set to 1, the mac-d flows from both carriers
use different Iur transport bearers.
In independent Iur bearing mode, the requirements to the current
Reason
transmission bearer will not be improved.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2782
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.110.110 E-DCH UL Flow Multiplexing Support Indicator

Full Name
E-DCH UL Flow Multiplexing Support Indicator
Abbreviated Name
iurDcHsuMulInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the Iur interface supports E-DCH

UL Flow Multiplexing.
If its value is "1: Supported" , the Mac-d flows received on the
different carriers is multiplexed on one Iur transport bearer (per
Mac-d flow).
Instance
UTRAN Cell
ZWF26-03-004
DC-HSUPA
DC-HSUPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the mode in which the dual-carrier
E-DCH transport bearer is multiplexed.

Related factor: capability of the transport bearer.
When the parameter is set to 1, the mac-d flows from both carriers
use the same Iur transport bearer.
2-2783
SJ-20141209142030-013|2015-11-12 (R1.3)
In E-DCH UL Flow Multiplexing mode, the requirements to the
Reason
current transmission bearer will not be improved.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.111 DRNC Cell Type

Full Name
DRNC Cell Type
Abbreviated Name
externalCellType
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DRNC cell type.
Instance
External UTRAN Cell
ZWF23-04-005
0: Macro Cell
1: Micro Cell
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
2-2784
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the DRNC cell type.
Configuration rule: set it based on the type of the DRNC-side cell

in the network planning.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.112 External UTRAN Cell Dual Band Dual Cell+MIMO Support

Indicator
Full Name
External UTRAN Cell Dual Band Dual Cell+MIMO Support Indicator
Abbreviated Name
dCelDbMimoSupInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the neighboring cell of the DRNC

supports activating Dual Band Dual Cell and MIMO at the same time.
Instance
External UTRAN Cell
ZWF26-04-002
2-2785
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Support
1: Support
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
neighboring cell of the DRNC supports activating Dual Band Dual

Cell and MIMO at the same time.
Related factors: network deployment and HSDPA throughput of
the UE.
If the parameter is set to "1: Support", the DRNC cell supports
activating Dual Band Dual Cell and MIMO at the same time in the
radio link setup or reconfiguration, and this can increase the HSDPA
throughput of the UE. If the parameter is set to "0: Not Support", the
DRNC cell does not support activating Dual Band Dual Cell and
MIMO at the same time in the radio link setup or reconfiguration.
The MimoSuptInd parameter indicates whether the DRNC cell
supports the MIMO function. The IurDbHsdSuptInd parameter
indicates whether the DRNC cell supports the Dual Band Dual Cell
function. If both of the two parameters are set to "1: Support", this
does not mean that the DRNC cell can activate the MIMO and Dual
Band Dual Cell in the radio link.
The default setting is based on the MC capability of the cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2786
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.110.113 The RNC ID of Backup Cell

Full Name
The RNC ID of Backup Cell
Abbreviated Name
backupAdjRncID
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
If an Adjacent RNC Cell has a backup cell, this parameter indicates

the RNCID of the backup cell. The value 65535 indicates that this
attribute is invalid.
Instance
External UTRAN Cell
ZWF21-30-206
0..65535
Unit
N/A
Default Value
65535
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

function is needed.
2-2787
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.114 The Cell ID of Backup Cell

Full Name
The Cell ID of Backup Cell
Abbreviated Name
backupAdjCellID
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

the CellID of the backup cell. The value 65535 indicates that this
Instance
External UTRAN Cell
ZWF21-30-206
0..65535
Unit
N/A
Default Value
65535
Related Parameters
N/A
2-2788
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

function is needed.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.115 Multi-Cell HS-DSCH Supported Indication for the Cell

over Iur
Full Name
Multi-Cell HS-DSCH Supported Indication for the Cell over Iur
Abbreviated Name
iurMcHsdsSptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2789
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the Multi-Cell HS-DSCH is

supported for the cell over Iur. It should be set to the Multi-Cell
HS-DSCH capability of the cell in the C-RNC.
Instance
External UTRAN Cell
ZWF26-04-001
4C-HSDPA
4C-HSDPA FG
0: MC HS-DSCH Not Supported

3: 3C HS-DSCH Supported
4: 4C HS-DSCHSupported
Unit
N/A
Default Value
0: MC HS-DSCH Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether the Multi-Cell
HS-DSCH is supported for the cell over Iur.

Related factor: Multi-Cell HS-DSCH capability of the cell in the
C-RNC.
Adjustment suggestion: This parameter should be set based on the
capability of the cell in the C-RNC.
It's a function switch and the function is disabled by default
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2790
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.110.116 HSDPA 3 or 4 Adjacent-carrier and MIMO Capability for

Single Band over Iur
Full Name
HSDPA 3 or 4 Adjacent-carrier and MIMO Capability for Single

Band over Iur
Abbreviated Name
iurSB4CMimoSptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether 3 or 4 Adjacent-carrier HSDPA

and MIMO is supported for Single Band over Iur. It should be set
to the 3 or 4 Adjacent-carrier HSDPA and MIMO capability of the
cell in the C-RNC.
Instance
External UTRAN Cell
ZWF26-04-003
Combination of4C-HSDPA and MIMO
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-2791
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether 3 or 4
Adjacent-carrier HSDPA and MIMO is supported for Single Band

over Iur.
Related factor: 3 or 4 Adjacent-carrier HSDPA and MIMO capability
for Single Band over Iur.
Adjustment suggestion: This parameter should be set in accordance
with the capability of the cell in the C-RNC.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.117 HSDPA 3 or 4 Carrier and MIMO Capability for Dual Band

over Iur
Full Name
HSDPA 3 or 4 Carrier and MIMO Capability for Dual Band over Iur
Abbreviated Name
iurDB4CMimoSptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether 3 or 4 carrier HSDPA and MIMO is

supported for Dual Band over Iur. It should be set to the 3 or 4 carrier
HSDPA and MIMO capability for Dual Band of the cell in the C-RNC.
Instance
External UTRAN Cell
ZWF26-04-003
2-2792
SJ-20141209142030-013|2015-11-12 (R1.3)
Combination of4C-HSDPA and MIMO
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether 3 or 4 carrier
HSDPA and MIMO capability is supported for Dual Band over Iur.
Related factor: 3 or 4 carrier HSDPA and MIMO capability for Dual
Band over Iur.
with the capability of the cell in the C-RNC.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.118 Max Number of HS-DSCH Secondary Serving Cell over Iur

2-2793
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Max Number of HS-DSCH Secondary Serving Cell over Iur
Abbreviated Name
maxNumofSndCell
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of HS-DSCH

secondary serving cells of the neighboring cell over Iur. It should
be set to the maximum number of HS-DSCH secondary serving
cells of the cell in the C-RNC.
Instance
External UTRAN Cell
ZWF26-02-004
ZWF26-04-001
DC-HSDPA
4C-HSDPA
DC-HSDPA FG
4C-HSDPA FG
0..DBS_RR_MAX_NUM_HSDSCH_SNDCELL
DBS_RR_MAX_NUM_HSDSCH_SNDCELL=10.
Unit
N/A
Default Value
Related Parameters
IurDcHsdsSuptInd
if the value of IurDcHsdsSuptInd is "0: Not Supported", this
Parameters
parameter is invalid for the correspongding Cell; else, this parameter

must be set,
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2794
SJ-20141209142030-013|2015-11-12 (R1.3)
of HS-DSCH secondary serving cells of the neighboring cell over Iur.

Related factor: MC HSDPA Secondary Serving Cell number of the
cell in the C-RNC.
It should be set the same as the HS-DSCH secondary serving cells
of the cell in the C-RNC.
Adjustment suggestion: set it the same as the HS-DSCH secondary
serving cells of the cell in the C-RNC. If the cell in the C-RNC
supports MC HSDPA, this parameter should be set to Secondary
Serving Cell number of the cell in the C-RNC. If the cell in the
C-RNC does not support MC HSDPA, this parameter is invalid.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.119 Possible Secondary Serving Cell ID List over Iur

Full Name
Possible Secondary Serving Cell ID List over Iur
Abbreviated Name
sndSvrCelIDList
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Possible Secondary Serving Cell ID

of the neighboring cell over Iur, and should be set to the Possible
Secondary Serving Cell ID of the cell in the C-RNC.
2-2795
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
External UTRAN Cell
ZWF26-02-004
ZWF26-04-001
ZWF26-03-004
DC-HSDPA
4C-HSDPA
DC-HSUPA
DC-HSDPA FG
4C-HSDPA FG
DC-HSUPA FG
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
IurDcHsdsSuptInd
MaxNumofSndCell
if the value of IurDcHsdsSuptInd is "0: Not Supported", this
Parameters
parameter is invalid for the correspongding Cell; else, this

parameter must be set, and the valid element number is equal to
MaxNumofSndCell,
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the Possible
Secondary Serving Cell ID of the cell over Iur with Multi-cell HSDPA
capability.
Related factors: multi-cell HSDPA capability of the cell in the
C-RNC, and the secondary serving cell ID of the cell in the C-RNC.
with the Secondary Serving Cell ID of the cell in the C-RNC. If the
cell in the C-RNC supports MC HSDPA, this parameter should be
set to the Secondary Serving Cell ID. If the cell in the C-RNC does
not support MC HSDPA, this parameter is invalid.
N/A
Reason
Change Take Effect
New Connection
No
2-2796
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.120 Multicell E-DCH Restriction over Iur

Full Name
Multicell E-DCH Restriction over Iur
Abbreviated Name
mulEdchRestrt
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to restrict the multi-cell E-DCH of

the corresponding Possible Secondary Serving Cell over Iur.
Instance
External UTRAN Cell
ZWF26-03-004
ZWF26-04-001
DC-HSUPA
4C-HSDPA
DC-HSUPA FG
4C-HSDPA FG
0: FALSE
1: TRUE
Unit
N/A
Default Value
N/A
Related Parameters
SndSvrCelIDList
The configuration of this parameter must correspond to that of the
Parameters
cell in SndSvrCelIDList.
Data Type
Parameter Type
2-2797
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates whether to restrict the multi-cell
E-DCH of the corresponding Possible Secondary Serving Cell over

Iur.
Related factor: Whether the uplink of a neighboring cell over Iur can
be used as secondary serving cell of DC-HSUPA.
Configuration rule: If the uplink of a cell in SndSvrCelIDList cannot
be used as an E-DCH secondary serving cell, this parameter is set
to "TRUE". If the uplink of a cell in SndSvrCelIDList can be used as
an E-DCH secondary serving cell, this parameter is set to "FALSE".
The default value is set based on operator network deployment.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.110.121 Multiflow HSDPA Supported Indication for the Cell over

Iur
Full Name
Multiflow HSDPA Supported Indication for the Cell over Iur
Abbreviated Name
iurMfHsdSuptInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2798
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether Multiflow HSDPA is supported

by the neighboring cells over the Iur interface. The value of this
parameter should be consistent with the Multiflow HSDPA capability
of the neighboring cells in the C-RNC.
Instance
Utran Cell
ZWF26-05-001
Multi-Flow HSDPA
Multi-Flow HSDPA FG
0: Not Supported
1: Supported
Unit
NA
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether a cell of the
neighbor RNC supports Multiflow HSDPA.

Related factors: Multiflow HSDPA capability of the cell in C-RNC.
This parameter indicates whether the neighbor cell supports
Multiflow HSDPA. The parameter value must be the same as the
Multiflow HSDPA capability of the cell configured at the C-RNC side.
The default value is set based on the multiflow HSDPA capability in
Reason
C-RNC of the cell.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
2-2799
SJ-20141209142030-013|2015-11-12 (R1.3)
Add
2.111 External GSM Cell(UExternalGsmCell)

2.111.1 External GSM Cell Object ID
Full Name
External GSM Cell Object ID
Abbreviated Name
UExternalGsmCellId
Managed Object
External GSM Cell(UExternalGsmCell)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the external GSM cell

configuration.
Instance
RNC
N/A
N/A
N/A
0..999999999999
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
2-2800
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>External Resource Configuration->External GSM Cell
N/A
N/A
2.111.2 Cell Identifier

Full Name
Cell Identifier
Abbreviated Name
cellIdentity
Managed Object

3GPP Name
CI; Cell Identity
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the identifier of a GSM neighboring cell. It

is valid only within the location area (identified by an LAC) where
the cell is located.
Instance
GSM Neighboring Cell
N/A
N/A
Basic Id Parameter
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
MCC
MNC
LAC
Parameters
for sharingMCC[]+sharingMNC+lac+cellIdentity
2-2801
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: identifier of a GSM neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.3 BCCH ARFCN

Full Name
BCCH ARFCN
Abbreviated Name
bcchFrequency
Managed Object

3GPP Name
BCCH ARFCN
3GPP Reference
TS 25.331
2-2802
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the absolute radio frequency channel

number of the BCCH of a GSM neighboring cell. It corresponds to
the central frequency of the carrier used by BCCH of the cell.
[512, 885] corresponds to Band DCS1800
[512, 812] corresponds to Band PCS1900
[0, 124] and [955, 1023] correspond to band GSM900
[259, 293] corresponds to Band GSM450
Instance
N/A
N/A
Basic Parameter
0..1023
Unit
N/A
Default Value
N/A
Related Parameters
Bandindicator
Bandindicator: DCS 1800, bcchFrequency: (512..885)
Parameters
Bandindicator: PCS 1900, bcchFrequency: (512 .. 812)

Bandindicator: Standard GSM900, bcchFrequency: (1..124)
Bandindicator: GSM 450, bcchFrequency: 259~293
Bandindicator: GSM480, bcchFrequency: 306~340
Bandindicator: Extended GSM900, bcchFrequency: (0..124)and
(975..1023)
Bandindicator: Railways GSM900, bcchFrequency: (0..124)and
(955..1023)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: absolute radio frequency channel number of
a GSM neighboring cell

Reason
of the operator.
Change Take Effect
New Connection
2-2803
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.4 Network Colour Code

Full Name
Network Colour Code
Abbreviated Name
ncc
Managed Object

3GPP Name
Network Colour Code (NCC)
3GPP Reference
TS 25.331
Description
When a neighboring cell is a GSM cell, its BSIC (Base Transceiver

Station Identity Code) consists of an NCC (Network Color Code)
and a BCC (Base Station Color Code). An NCC identifies a network,
for example, the GSM networks at the border of a GSM cell. A BCC
distinguishes the cells that use the same BCCH frequency point.
Instance
N/A
N/A
Basic Id Parameter
0..7
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-2804
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: network color code of a GSM neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.5 Base Station Colour Code

Full Name
Base Station Colour Code
Abbreviated Name
bcc
Managed Object

3GPP Name
Base Station Colour Code (BCC)
3GPP Reference
TS 25.331
Description
When a neighboring cell is a GSM cell, its BSIC (Base Transceiver

Station Identity Code) consists of an NCC (Network Color Code)
and a BCC (Base Station Color Code). An NCC identifies a network,
for example, the GSM networks at the border of a GSM cell. A BCC
distinguishes the cells that use the same BCCH frequency point.
Instance
N/A
N/A
2-2805
SJ-20141209142030-013|2015-11-12 (R1.3)
Basic Parameter
0..7
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: color code of a GSM neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Location Area Code
Abbreviated Name
lac
Managed Object

3GPP Name
2-2806
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the code of the location area where a

neighboring cell is located. It identifies different location areas.
LAC is one part of an LAI (Location Area Identity), which consists
of an MCC, an MNC and an LAC. There are multiple cells within a
location area.
Instance
N/A
N/A
Basic Id Parameter
1..0xfffd, 0xffff
Unit
N/A
Default Value
N/A
Related Parameters
MCC
MNC
cellIdentity
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: location area code of a GSM neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2807
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A

Full Name
Mobile Country Code
Abbreviated Name
mcc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
Instance
UTRAN Cell
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
460
Related Parameters
MNC
LAC
CI
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Function: neighboring GSM cells' MCC.

2-2808
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Mobile Network Code
Abbreviated Name
mnc
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicatesthe MNC of LAC in which a GSM

neighboring cell is located. LAC identifies different location
areas.LAC is one part of an LAI (Location Area Identity) that consists
of an MCC, an MNC and an LAC. There are multiple cells within a
location area.
Instance
UTRAN Cell
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
2-2809
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
N/A
Related Parameters
MCC
LAC
CI
mncLength
1) mncLength = 2, mnc is in (0~99 )
Parameters
2)mcc+mnc+lac+cellIdentity must be unqiue ; the same requirement

Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the MNC of
neighboring GSM cells.

Related factors: This parameter should be set according to the
carrier's network deployment.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Routing Area Code
Abbreviated Name
rac
Managed Object

2-2810
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the RAC of the GSM cell.
Instance
RNC
N/A
N/A
Basic Parameter
0..255
Unit
N/A
Default Value
N/A
Related Parameters
MCC of R8GsmCel, MNC of R8GsmCel, LAC of R8GsmCel, RAC

of R8Gsm Cel
RAI contain MCC, MNC, LAC and RAC (RAI = MCC + MNC + LAC+
Parameters
RAC), only valid when GeranCellInd is1
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the RAC of the
GSM cell.
neighboring GSM cell, and be configured according to the RAC of
the neighboring GSM cell.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2811
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.111.10 Routing Area Colour Code

Full Name
Routing Area Colour Code
Abbreviated Name
racc
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
Routing Area Colour Code
Instance
external Gsm Cell
N/A
N/A
Basic Parameter
0..255
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
The parameter wasn't be used by RNC.
N/A
Reason
Change Take Effect
Unmodifiable
No
2-2812
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
MNC BCD Code Length
Abbreviated Name
mncLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
neighboring GSM cell.
Instance
UTRAN Cell
ZWF21-30-101
RAN Sharing FG
2..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2813
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the neighboring GSM
cells' MNC BCD length.

Related factors: This parameter should be set according to the
carrier's network deployment.
This parameter is set based on the deployment of most of the
Reason
carriers.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
sharingMCC
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the code of the country where a cell is

located. It uniquely identifies the country that a mobile user or a
system belongs to. MCC is uniformly allocated by an international
standard organization.
Instance
ZWF21-30-101
2-2814
SJ-20141209142030-013|2015-11-12 (R1.3)
RAN Sharing FG
0..999
Unit
N/A
Default Value
460
Related Parameters
MNC
LAC
CI
Parameters
Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: mobile country code of a GSM neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
sharingMNC
Managed Object

2-2815
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Description
This parameter indicates the sharing MNC of the GSM neighboring

cell.
Instance
RNC and PLMN
ZWF21-30-101
RAN Sharing FG
0..999
Unit
N/A
Default Value
N/A
Related Parameters
MCC
LAC
CI
mncLength
1) mncLength = 2, mnc is in (0~99 )
Parameters
2)mcc+mnc+lac+cellIdentity must be unqiue ; the same requirement

Data Type
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: neighboring GSM cells' MNC.

network deployment.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-2816
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
sharing MNC Length
Abbreviated Name
sharingMNCLength
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
neighboring GSM cell.
Instance
UTRAN Cell
ZWF21-30-101
RAN Sharing FG
2..3
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the neighboring GSM
cells' MNC BCD length.

network deployment.
2-2817
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
deployment.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.15 GERAN Cell Indicator

Full Name
GERAN Cell Indicator
Abbreviated Name
geranCellInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a cell is a GERAN cell.
Instance
N/A
N/A
Basic Parameter
0: Not GERAN Cell

1: GERAN Cell
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-2818
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicator of a GERAN cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.16 BSC Identifier

Full Name
BSC Identifier
Abbreviated Name
bscId
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the identifier of the BSC that a GSM cell
belongs to. It identifies the index number of a BSC and is configured
by an operator.
Instance
N/A
N/A
Basic Id Parameter
0..65535
2-2819
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: BSC identifier of a GSM cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.17 Shared Network Area Code Number

Full Name
Shared Network Area Code Number
Abbreviated Name
snacNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of SNACs that the neighboring

cell belongs to.
2-2820
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-30-102
RAN Sharing FG
0.. MAX_NUM_SNAC_PER_GSMCEL,
Unit
N/A
Default Value
Related Parameters
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the number of
SANCs of the GSM cell.

neighboring GSM cell, and be configured according to the number
of SANCs of the neighboring GSM cell. If network sharing is not
used, this parameter is set to 0.
The default value is determined by the fact that network sharing is
Reason
not used in most networks.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

2-2821
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Abbreviated Name
snacList
Managed Object

3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the Shared Network Area Code (SNAC)

that the neighboring cell belongs to. One cell can belong to up to
four SNACs.
Instance
RNC
ZWF21-30-102
RAN Sharing FG
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
Parameters
Data Type
long[DBS_RR_MAX_NUM_SNAC_PER_GSMCEL]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter configures the SANC
information of the GSM cell.

neighboring GSM cell, and be configured according to the SNAC
information of the neighboring GSM cell. If network sharing is not
used, this parameter should not be configured.
N/A
Reason
Change Take Effect
No
2-2822
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.19 Band Indicator

Full Name
Band Indicator
Abbreviated Name
bandIndicator
Managed Object

3GPP Name
Band indicator
3GPP Reference
TS 25.331
Description
This parameter indicates the frequency band used by the BCCH

ARFCN of a GSM neighboring cell.
Instance
N/A
N/A
Basic Parameter
0: DCS 1800 Band Used;

1: PCS 1900 Band Used;
2: Standard GSM 900 Band Used
3: GSM 450 Band Used
7: Extended GSM 900 Band Used
8: Railways GSM 900 Band Used
Unit
N/A
Default Value
DCS 1800 Band Used
Related Parameters
N/A
2-2823
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: frequency band of a GSM neighboring cell
Reason
of the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.20 Maximum Allowed UL TX Power

Full Name
Maximum Allowed UL TX Power
Abbreviated Name
maximumAllowedUlTxPower
Managed Object

3GPP Name
maximum allowed UL TX power
3GPP Reference
TS 25.331
Description
This parameter indicates the maximum uplink transmit power

allowed for a UE in a GSM cell. When the uplink transmit power of a
UE exceeds this threshold, it should be lowered below the threshold
to minimize the interference to other UEs.
Instance
2-2824
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-005
OMCR: (-50..33)dBm, step 1dBm; RNC: D=P+50, 0..83
Unit
dBm
Default Value
30 dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: maximum allowed uplink transmit power of
a GSM cell
Related factors: maximum transmit power that a UE supports
This parameter should be configured based on a UEs GSM
capabilities. A small parameter value may restrict the maximum
power that can be used by a UE, which results in an impact on the
service performance.
The default parameter value is set based on the maximum transmit
Reason
power that a UE supports.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2825
SJ-20141209142030-013|2015-11-12 (R1.3)
2.111.21 HCS_PRIO
Full Name
HCS_PRIO
Abbreviated Name
hcsPrio
Managed Object

3GPP Name
HCS_PRIO; HCS Prio
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.304
Description
This parameter indicates the HCS priority (0-7) for a GSM

neighboring cell. The highest priority is 7, and the lowest priority is 0.
Instance
ZWF21-03-005
ZWF21-03-021


0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: HCS priority (0-7) for a GSM neighboring cell
Related factors: velocity of a UE

The smaller the parameter value is, the lower the HCS priority of a
GSM cell is, the easier it is for a UE in the high-mobility state to
reselect a cell with a low HCS priority, and the easier it is for a UE in
the low-mobility state to reselect a cell with a high HCS priority.
Reason
is not used.
2-2826
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Qrxlevmin in SIB11
Abbreviated Name
qrxlevMin
Managed Object

3GPP Name
Qrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description

broadcast in SIB11.
Instance
ZWF21-03-005
OMCR: (-115..-25)dB, step 2 dB
Unit
dBm
Default Value
-115dBm
Related Parameters
N/A
2-2827
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

The smaller the parameter value is, the larger the coverage of the
cell is, and the easier it is to fulfill the cell reselection criterion, and
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
deltaQrxlevminPr
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.304
2-2828
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

neighboring cell in SIB11. If this parameter is set to True, the actual
Instance
ZWF21-03-005
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

Reason
of a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2829
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A

Full Name
Abbreviated Name
deltaQrxlevmin
Managed Object

3GPP Name
DeltaQrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description

DeltaQrxlevmin.
Instance
ZWF21-03-005
Unit
dB
Default Value
-2dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2830
SJ-20141209142030-013|2015-11-12 (R1.3)

The smaller the parameter value is, the easier it is to trigger
inter-RAT handover, and vice versa. But when the parameter is
set to a small value, the call success rate for users at the edge of
Reason
of a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Qrxlevmin in SIB12
Abbreviated Name
qrxlevMinSib12
Managed Object

3GPP Name
Qrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description

broadcast in SIB12.
2-2831
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-005
Unit
dBm
Default Value
-115dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

The smaller the parameter value is, the larger the coverage of the
cell is, and the easier it is to fulfill the cell reselection criterion, and
vice versa.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2832
SJ-20141209142030-013|2015-11-12 (R1.3)

Full Name
Abbreviated Name
deltaQrxlevminSib12Pr
Managed Object

3GPP Name
N/A
3GPP Reference
TS 25.304
Description

neighboring cell in SIB12. If this parameter is set to True, the actual
Instance
ZWF21-03-005
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Reason
of a cell.
2-2833
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
deltaQrxlevminSib12
Managed Object

3GPP Name
Qrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description

DeltaQrxlevmin.
Instance
ZWF21-03-005
Unit
dB
Default Value
-2dB
Related Parameters
N/A
N/A
Parameters
2-2834
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

The smaller the parameter value is, the easier it is to trigger
inter-RAT handover, and vice versa. But when the parameter is
set to a small value, the call success rate for users at the edge of
Reason
of a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.28 Cell Individual Offset

Full Name
Cell Individual Offset
Abbreviated Name
cellIndivOffset
Managed Object

3GPP Name
3GPP Reference
TS 25.331
2-2835
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates a cell individual offset. An offset is

allocated to each cell that is monitored. The offset can be positive
or negative. Before a UE determines whether an event occurs, the
offset should be added to the measurement quantity. If the PCPICH
uses a positive offset, the UE sends the measurement report just
like the PCPICH is x dB better than the actual case. If the PCPICH
uses a negative offset, The PCPICH report is limited. When a cell
individual offset is used, the corresponding cell may be (at least
temporarily) the target cell for handover or removed from the active
set.
Instance
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
(-50..50)dB, step 1 dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: cell individual offset to control how difficult it is
for a UE to perform an inter-RAT handover to a GSM neighboring cell

Related factors: handover difficulty, timeliness, and tendency
The smaller the parameter value is, the easier it is for a UE to
perform an inter-RAT handover to a GSM neighboring cell, and vice
versa. This parameter can be set to different values for different
GSM neighboring cells to reflect handover tendency.
Adjustment suggestion: It is suggested to adjust the parameter to a
greater value in case where the quality of signal changes rapidly to
ensure timely handover.
The default parameter value is set based on handover timeliness,
Reason
difficulty, and tendency.
Change Take Effect
No
2-2836
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.29 GSM Downlink Load Threshold

Full Name
GSM Downlink Load Threshold
Abbreviated Name
gsmDlLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink overload threshold in the 2G

system. If the load of a cell exceeds this threshold, the cell is not
treated as the target cell for handover.
Instance
ZWF21-03-026
(1.. 100)%, step 1
Unit
Default Value
85
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2837
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: downlink overload threshold in the GSM system
Related factors: probability of inter-RAT handover, load of GSM

neighboring cells
During a UE's handover from 3G to 2G, the smaller the parameter
value is, the easier it is for the UTRAN system to determine that
the GSM system is overloaded so that handover to GSM is not
triggered. When 3G signal turns poor, call drop may occur.
During a UE's handover from 3G to 2G, the greater the parameter
value is, the more difficult it is for the UTRAN system to determine
that the GSM system is overloaded. If the GSM system is
overloaded, access by new UEs are not allowed, which leads to
handover failure.
Reason
inter-RAT handover and the load of GSM neighboring cells.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.30 GSM Uplink Load Threshold

Full Name
GSM Uplink Load Threshold
Abbreviated Name
gsmUlLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink overload threshold in the 2G

system. If the load of a cell exceeds this threshold, the cell is not
treated as the target cell for handover.
2-2838
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
ZWF21-03-026
(1.. 100)%, step 1
Unit
Default Value
85
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: uplink overload threshold in the GSM system

neighboring cells
handover failure.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2839
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.111.31 GSM Downlink RT Load Threshold

Full Name
GSM Downlink RT Load Threshold
Abbreviated Name
gsmDlRtLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the real-time downlink overload threshold

in the 2G system. If the load of a cell exceeds this threshold, the cell
is not treated as the target cell for handover.
Instance
ZWF21-03-026
(1.. 100)%, step 1
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2840
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: real-time downlink overload threshold in the
GSM system
neighboring cells
handover failure.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.111.32 GSM Uplink RT Load Threshold

Full Name
GSM Uplink RT Load Threshold
Abbreviated Name
gsmUlRtLdThrd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-2841
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the real-time uplink overload threshold in

the 2G system. If the load of a cell exceeds this threshold, the cell is
not treated as the target cell for handover.
Instance
ZWF21-03-026
(1.. 100)%, step 1
Unit
Default Value
75
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: real-time uplink overload threshold in the GSM
system
neighboring cells
handover failure.
Reason
Change Take Effect
No
How to Impact
N/A
2-2842
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.111.33 Indoor Cell Indicator

Full Name
Indoor Cell Indicator
Abbreviated Name
indoorCellInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates whether the cell is an indoor cell. If the cell
is an indoor cell, because signals change quickly, the handover
parameter should be set a more sensitive value to ensure timely
handovers.
Instance
Gsm Neighboring Cell
ZWF21-03-004
Inter-RAT Mobility
Handover Control FG
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2843
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicator of indoor cells

If the neighboring cell is an indoor cell, the parameter is set to 1 to
ensure timely handovers.
If the neighboring cell is not an indoor cell, the parameter is set to 0.
Reason
of the operator.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112 UTRAN Cell(UUtranCellFDD)

2.112.1 UTRAN Cell Object ID
Full Name
UTRAN Cell Object ID
Abbreviated Name
UUtranCellFDDId
Managed Object
UTRAN Cell(UUtranCellFDD)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the UTRAN cell.
Instance
RNC
N/A
N/A
N/A
0..2147483647
2-2844
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>UTRAN Cell
N/A
N/A
2.112.2 Cell Identity

Full Name
Cell Identity
Abbreviated Name
cId
Managed Object
3GPP Name
C-ID
3GPP Reference
TS 25.433
Description
Cell Identity is valid only in the RNC where the cell locates.
Instance
UTRAN Cell
2-2845
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
Basic Parameter
0..65534, step 1
Unit
N/A
Default Value
N/A
Related Parameters
CId of UtranCell
CId of AICH must be the same as the CId of UtranCell of the same
Parameters
cell.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: Cell Identity.
Configuration Rule: CId of different cells of the same RNC should

be different.
Adjustment Suggestion: CId of different cells of the same RNC
should be different.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.3 Local Cell Identity

Full Name
Local Cell Identity
2-2846
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
localCellId
Managed Object
3GPP Name
Local Cell ID; Local Cell Identifier
3GPP Reference
TS 25.433;
TS 25.401
Description
The local cell ID represents resources in the Node B that can be

used for the configuration of a cell.
Instance
UTRAN Cell
ZWF21-01-002
0x0..0x0fffffff
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Local Cell ID. The parameter must be configured as same as
configuration of NODEB.
N/A
Reason
Change Take Effect
Ongoing Connectionat cell re-establshed
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2847
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.112.4 Cell Maximum Transmission Power

Full Name
Cell Maximum Transmission Power
Abbreviated Name
maximumTransmissionPower
Managed Object
3GPP Name
Maximum Transmission Power
3GPP Reference
TS 25.433
Description
This parameter indicates the maximum allowed value for the linear
sum of the power of all downlink physical channels in a cell.
Instance
UTRAN Cell
ZWF21-04-001
Admission Control
Admission Control FG / Node B Management FG
OMCR: (0.0..50.0)dBm, step 0.1dBm; RNC: D=P*10, 0..500
Unit
dBm
Default Value
43dBm
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum linear
sum of the allowed transmit power of all the physical downlink

channels of a cell.
Related factors: coverage, system capacity, and the actual ability
of Node B.
Adjustment suggestion: If the parameter value is too small, the
coverage and downlink capacity are restricted. But the value of
this parameter cannot be bigger than the actual allowed maximum
power of Node B.
2-2848
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
planning and optimization engineer according to actual conditions.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.5 PICH Power

Full Name
PICH Power
Abbreviated Name
pichPower
Managed Object
3GPP Name
PICH Power offset; PICH Power
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the PICH transmit power. It is an offset

relative to the primary CPICH power.
Instance
UTRAN Cell
ZWF21-04-009
ZWF21-01-003
Power Control
Paging
Node B Management FG / Power Control FG / Connection

Management FG
(-10.. 5)dB, step 1dB
Unit
dB
Default Value
-7dB
2-2849
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the PICH transmit
power.
Related factors: downlink coverage and system capacity.
Adjustment suggestion: The parameter value should ensure that
UEs at the edge of the cell receive the PICH correctly and that
power is not wasted.
If the parameter value is too small, the paging information cannot
be properly received when UEs reside at the edge of the cell. This
will read the PCH information by mistake and eventually affect the
downlink coverage.
If the parameter value is too big, it will increase unnecessary
interference to other common channels, waste the downlink power,
The default PICH power can ensure high paging success rate and
Reason
optimum system capacity.
Change Take Effect
No
How to Impact
The related common transport channel will be reconfigured.
Access
Read/Write
OMC Access path
N/A
N/A
2.112.6 Cell Mode

Full Name
Cell Mode
2-2850
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
cellMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell mode of the object.
Instance
RNC
N/A
N/A
N/A
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2-2851
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.7 Used Location Area

Full Name
Used Location Area
Abbreviated Name
refULocationArea
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates reference to ULocationArea object.
Instance
RNC
N/A
N/A
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
This parameter indicates reference to ULocationArea object.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2852
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.8 Used Routing Area

Full Name
Used Routing Area
Abbreviated Name
refURoutingArea
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates reference to URoutingArea object.
Instance
RNC
N/A
N/A
Basic ID parameter
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates reference to URoutingArea object.
N/A
Reason
Change Take Effect
No
2-2853
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.9 Used Service Area in CS+PS Domain

Full Name
Used Service Area in CS+PS Domain
Abbreviated Name
refUServiceArea
Managed Object
3GPP Name
3GPP Reference
TS 25.423;
TS 25.413;
TS 23.003
Description
This parameter indicates the code of the Service Area (SA) for CS
and PS domains where a cell is located. A Service Area Code
(SAC) uniquely identifies one or multiple cells that belong to the
same Location Area (LA). An SAC indicates the UE location for
Instance
UTRAN Cell
N/A
N/A
Basic Parameter
N/A
Unit
N/A
2-2854
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
N/A
Related Parameters
MCC of utranCell, MNC of utranCell, LAC of utranCell, SACPC of

utranCell
CS+PS's SAI = MCC + MNC + LAC+ SACPC
Parameters
Data Type
string
Parameter Type
Negotiation With CN
Yes
Function Switch
No
service area code.

N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.10 Frequency Band Indicator

Full Name
Frequency Band Indicator
Abbreviated Name
freqBandInd
Managed Object
3GPP Name

band indicator 2
3GPP Reference
TS 25.331;
TS 25.423
2-2855
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the frequency band of the central

frequency of a cell.
Instance
UTRAN Cell
ZWF21-01-001
0: Band I
1: Band II
2: Band III
3: Band IV
4: Band V
5: Band VI
7: Band VIII
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
an indicator of the frequency band of the cell.

Related factors: frequency allocation and network deployment of
an operator.
N/A
Reason
Change Take Effect
Yes
How to Impact
Cell will be deleted and reestablished.
Access
Read/Write
OMC Access path
2-2856
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.112.11 DUARFCN
Full Name
DUARFCN
Abbreviated Name
uarfcnDl
Managed Object
3GPP Name
UARFCN downlink (Nd); DL UARFCN; UARFCN; UTRA Absolute

3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
Description
This parameter indicates the central frequency of the downlink

carrier used by a cell. It is a UTRA absolute radio frequency channel
No., indicating the central frequency of the carrier used on the
downlink channel of the cell.
Instance
UTRAN Cell
ZWF21-01-002
Band I: 10562..10838
Band II: 9662..9938, 412, 437, 462, 487, 512, 537, 562, 587, 612,
637, 662, 687
Band III: 1162.. 1513
Band V: 4357.. 4458, 1007, 1012, 1032, 1037, 1062, 1087
Band VI: 4387..4413, 1037, 1062
Band VIII: 2937..3088
0xff means invalid.
Band IV: 1537.. 1738, 1887, 1912, 1937, 1962, 1987, 2012, 2037,
2062, 2087
Unit
N/A
Default Value
N/A
Related Parameters
FreqBandInd of utranCell, UUARFCN of utranCell, DUARFCN of

utranCell
2-2857
SJ-20141209142030-013|2015-11-12 (R1.3)
DUARFCN>UUARFCN, and
Parameters
if FreqBandInd is 0 (Band I), then DUARFCN shall be Band 1

(10562..10838), and UUARFCN=DUARFCN-950.
if FreqBandInd is 1 (Band II), then DUARFCN shall be Band 2
(9662..9938, 412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662,
687), and UUARFCN=DUARFCN-400.
if FreqBandInd is 2 (Band III), then DUARFCN shall be Band 3
(1162.. 1513), and UUARFCN=DUARFCN-225.
if FreqBandInd is 4 (Band V), then DUARFCN shall be Band
5 (4357 4458 , 1007, 1012, 1032, 1037, 1062, 1087), and
UUARFCN=DUARFCN-225.
if FreqBandInd is 5 (Band VI), then DUARFCN shall be Band 6
(4387 4413, 1037, 1062), and UUARFCN=DUARFCN-225.
if FreqBandInd is 7 (Band VIII), then DUARFCN shall be Band 8
if FreqBandInd is 3 (Band IV), then DUARFCN shall be Band 4
(1537.. 1738, 1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062,
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
central frequency of the carrier used on the downlink channel of

the cell.
an operator.
N/A
Reason
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2-2858
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.12 UUARFCN
Full Name
UUARFCN
Abbreviated Name
uarfcnUl
Managed Object
3GPP Name
UARFCN uplink (Nu); UL UARFCN; UARFCN; UTRA Absolute

3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
Description
This parameter indicates the central frequency point of the uplink

carrier used by a cell. It is the UTRA absolute radio frequency
channel No., corresponding to the central frequency of the carrier
used on the uplink channel of the cell.
Instance
UTRAN Cell
ZWF21-01-002
Band I: 9612..9888
Band II: 9262..9538, 12, 37, 62, 87, 112, 137, 162, 187, 212, 237,
262, 287
Band III: 937..1288
Band IV: 1312.. 1513, 1662, 1687, 1712, 1737, 1762, 1787, 1812,
1837, 1862
Band V: 4132..4233, 782, 787, 807, 812, 837, 862
Band VI: 4162.. 4188, 812, 837
Band VIII: 2712 ..2863
Unit
N/A
Default Value
N/A
Related Parameters
FreqBandInd of utranCell, UUARFCN of utranCell, DUARFCN of

utranCell
2-2859
SJ-20141209142030-013|2015-11-12 (R1.3)
DUARFCN>UUARFCN, and
Parameters
if FreqBandInd is 0 (Band I), then DUARFCN shall be Band 1

if FreqBandInd is 1 (Band II), then DUARFCN shall be Band 2
(9662..9938, 412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662,
if FreqBandInd is 2 (Band III), then DUARFCN shall be Band 3
(1162.. 1513), and UUARFCN=DUARFCN-225.
if FreqBandInd is 4 (Band V), then DUARFCN shall be Band
5 (4357 4458 , 1007, 1012, 1032, 1037, 1062, 1087), and
UUARFCN=DUARFCN-225.
if FreqBandInd is 5 (Band VI), then DUARFCN shall be Band 6
(4387 4413, 1037, 1062), and UUARFCN=DUARFCN-225.
if FreqBandInd is 7 (Band VIII), then DUARFCN shall be Band 8
if FreqBandInd is 3 (Band IV), then DUARFCN shall be Band 4
(1537.. 1738, 1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062,
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
frequency of the carrier used on the uplink channel of the cell.

an operator.
N/A
Reason
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2-2860
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.13 Cell Primary Scrambling Code

Full Name
Cell Primary Scrambling Code
Abbreviated Name
primaryScramblingCode
Managed Object
3GPP Name
Primary Scrambling Code
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the primary scrambling codes that are

used to distinguish cells. There are a total of 512 downlink primary
scrambling codes available in the UTRAN system.
Instance
UTRAN Cell
ZWF21-04-006
ZWF26-02-003
Code Resource Allocation

Code Resource Allocation FG

0..511
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
the primary scrambling code of a cell.

N/A
Reason
Change Take Effect
2-2861
SJ-20141209142030-013|2015-11-12 (R1.3)
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.112.14 P-CPICH Power

Full Name
P-CPICH Power
Abbreviated Name
primaryCpichPower
Managed Object
3GPP Name
Primary CPICH Tx Power; Primary CPICH power; Primary CPICH

Power
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates the P-CPICH transmit power, which is an

absolute value for the P-CPICH transmission.
Instance
UTRAN Cell
ZWF21-04-009
ZWF21-20-017
Power Control
Power Control FG
(-10.0..50.0)dBm, step 0.1dBm
Unit
dBm
Default Value
33dBm
Related Parameters
maximumTransmissionPower
2-2862
SJ-20141209142030-013|2015-11-12 (R1.3)
primaryCpichPower <= maximumTransmissionPower
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the P-CPICH transmit
power.
Related factors: correct receiving probability, coverage, and system
capacity.
If the parameter value is too small, the PCPICH coverage will be so
small that the UE's accurate receiving probability will be reduced
when it is at the edge of the cell.
If the parameter value is too large, it will increase unnecessary
downlink interference, waste downlink transmit power, and reduce
downlink capacity.
Reason
planning and optimization engineer according to the actual coverage

and system capacity requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.15 Primary SCH Power

Full Name
Primary SCH Power
Abbreviated Name
primarySchPower
Managed Object
2-2863
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Primary SCH Power
3GPP Reference
TS 25.433
Description
This parameter indicates the P-SCH transmit power of a cell. It is

the offset relative to the PCPICH transmit power.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Power Control FG
(-35..+15)dB, step 0.1dB
Unit
dB
Default Value
-5dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the P-SCH transmit
power.
Related factors: coverage and capacity.
If the parameter value is too small, the PSCH coverage will be so
small that UEs at the edge of the cell cannot search the cell.
If the parameter value is too large, it will cause unnecessary
interference, waste downlink power, and reduce downlink capacity.
The default parameter value should satisfy the requirements for
Reason
the coverage and the capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2864
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.16 Secondary SCH Power

Full Name
Secondary SCH Power
Abbreviated Name
secondarySchPower
Managed Object
3GPP Name
Secondary SCH Power
3GPP Reference
TS 25.433
Description
This parameter indicates the S-SCH transmit power of a cell. It is

relative to the PCPICH transmit power.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Power Control FG
(-35..+15)dB, step 0.1dB
Unit
dB
Default Value
-5dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2865
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the S-SCH transmit
power.
Related factors: coverage and capacity.
If the parameter value is too small, the S-SCH coverage will be so
small that UEs at the edge of the cell cannot search the cell.
If the parameter value is too large, it will cause unnecessary
The default parameter value should satisfy the requirements for
Reason
the coverage and the capacity.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.17 BCH Power

Full Name
BCH Power
Abbreviated Name
bchPower
Managed Object
3GPP Name
BCH Power
3GPP Reference
TS 25.433
Description
This parameter indicates the BCH transmit power in a cell. This

parameter is the offset (dB) relative to the PCPICH transmit power.
A BCH is mapped one-to-one to a physical PCCPCH. In addition,
one cell only has one PCCPCH/BCH.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
2-2866
SJ-20141209142030-013|2015-11-12 (R1.3)
Power Control FG
(-35..+15)dB, step 0.1dB
Unit
dB
Default Value
-4dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the BCH transmit
power.
Related factors: downlink coverage and system capacity. This
parameter value should ensure that UEs at the edge of the cell
receive system information correctly and that power is not wasted.
If the parameter value is too small, the BCH coverage will be so
small that the probability of UEs at the edge of the cell correctly
receiving system information is decreased.
If the parameter value is too large, it will increase unnecessary
Adjustment suggestion: If a lot of UEs at the edge of the cell cannot
receive system information correctly, the BCH transmit power can be
increased. Otherwise, the BCH transmit power can be decreased.
The default value satisfies the requirements for the cell coverage
Reason
radius and the system capacity.
Change Take Effect
No
How to Impact
The cell will be reconfigured, but the reconfiguration will not affect
equipment operation or users' usage and status.
Access
Read/Write
OMC Access path
N/A
N/A
2-2867
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.18 AICH Power

Full Name
AICH Power
Abbreviated Name
aichPower
Managed Object
3GPP Name
AICH Power offset; AICH Power
3GPP Reference
TS 25.331;
TS 25.433
Description
This parameter indicates the AICH transmit power. It is an offset

relative to the primary CPICH power.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Node B Management FG / Power Control FG / Connection

Management FG
Unit
dB
Default Value
-7dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the AICH transmit
power.
Adjustment suggestion: The parameter value should ensure that
UEs at the edge of the cell receive the AICH correctly and that
power is not wasted.
If the parameter value is too small, the AI information might cannot
be rightly received when the UE resides at the edge of the cell,
which would reduce the downlink coverage.
2-2868
SJ-20141209142030-013|2015-11-12 (R1.3)

interference to other common channels, waste the downlink power,
The default AICH power can ensure that the UE at the edge of the
Reason
cell can receive the AI information rightly and the system capacity
is the biggest.
Change Take Effect
No
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.112.19 Minimum Required Quality Level in the Cell (Qqualmin)

Full Name
Minimum Required Quality Level in the Cell (Qqualmin)
Abbreviated Name
qqualMin
Managed Object
3GPP Name
Qqualmin
3GPP Reference
TS 25.331;
TS 25.304
Description
This parameter indicates the minimum required quality level of

a cell to meet cell selection/reselection conditions. When the
measurement quantity is CPICH Ec/No, a cell can be selected only
when the quality of the cell exceeds Qqualmin.
Instance
UTRAN Cell
ZWF21-03-005
2-2869
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
dB
Default Value
-18dB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: minimum required quality level of a cell to meet
cell selection/reselection conditions

When the measurement quantity is CPICH Ec/No, a UE selects a
cell only when the measured quality of the cell exceeds Qqualmin.
The greater the parameter is, the more difficult it is for a UE to
reselect and camp on the cell. The smaller the parameter is, the
easier it is for a UE to reselect and camp on the cell. But it is likely
that the UE cannot correctly receive system messages carried in
PCCPCH after it camps on the cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.20 Minimum Required Received Level in the Cell (Qrxlevmin)

Full Name
Minimum Required Received Level in the Cell (Qrxlevmin)

2-2870
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
qrxlevMin
Managed Object
3GPP Name
Qrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description

a cell to meet cell selection/reselection conditions. When the
measurement quantity is CPICH RSCP, a cell can be selected only
when the receive level of the cell exceeds Qrxlevmin.
Instance
UTRAN Cell
ZWF21-03-005
Unit
dBm
Default Value
-115dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: minimum required receive level of a cell to meet
cell selection/reselection conditions

When the measurement quantity is CPICH RSCP, a UE selects a
cell only when the measured quality of the cell exceeds Qrxlevmin.
The greater the parameter is, the more difficult it is for a UE to
reselect and camp on the cell. The smaller the parameter is, the
easier it is for a UE to reselect and camp on the cell. But it is likely
that the UE cannot correctly receive system messages carried in
PCCPCH after it camps on the cell.
Reason
2-2871
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.21 Increment to the Minimum Required Received Level in the

Cell (DeltaQrxlevmin)
Full Name
Increment to the Minimum Required Received Level in the Cell

(DeltaQrxlevmin)
Abbreviated Name
deltaQrxlevmin
Managed Object
3GPP Name
DeltaQrxlevmin
3GPP Reference
TS 25.331;
TS 25.304
Description
This parameter indicates the increment to the minimum required

receive level in a cell. It is used to extend Qrxlevmin, which means
that Qrxlevmin = Qrxlevmin + DeltaQrxlevmin.
Instance
UTRAN Cell
ZWF21-03-005
(-4..-2)dB, Step2dB
Unit
dB
Default Value
-2dB
Related Parameters
N/A
2-2872
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: minimum increment to the minimum required
receive level
When DltaQRxLevMinPr is set to True, Qrxlevmin=Qrxlevmin +
DeltaQrxlevmin, which means that the range of cell reselection is
extended. When DltaQRxLevMinPr is set to False, the range of cell
reselection remains unchanged, which means Qrxlevmin.
Adjustment suggestion: It is suggested to configure this parameter
for cells with large radiuses.
Reason
No coverage extension is needed for normal cells.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.22 Cell Reserved for Operator Use

Full Name
Cell Reserved for Operator Use
Abbreviated Name
restrictionStateIndicator
Managed Object
3GPP Name
Cell Reserved for operator use
2-2873
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.304
Description
This parameter indicates that a cell is reserved for operator use. If

the parameter is set to Reserved, UEs with AC11 or AC 15 can
treat this cell as a candidate during cell selection/reselection. UEs
with other access classes shall behave as if the cell status is set
to barred.
Instance
UTRAN Cell
ZWF21-03-005
0: Reserved
1: Not Reserved
Unit
N/A
Default Value
Not Reserved
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicator of cell reservation for operator use
If an operator does not expect UEs to access certain cells, this

parameter of these cells that is broadcast in SIB3 is set to Reserved.
Otherwise, the parameter is set to Not Reserved.
If the parameter is set to Reserved, the corresponding cell cannot
be camped on, except for particular UEs, if indicated in the system
information.
If the parameter is set to Not Reserved, the corresponding cell can
be camped on.
The default parameter value is set to Not Reserved if there are no
Reason
special requirements.
Change Take Effect
No
0
2-2874
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.23 STTD Support Indicator

Full Name
STTD Support Indicator
Abbreviated Name
sttdSupportIndicator
Managed Object
3GPP Name
STTD Support Indicator; STTD Indicator; STTD indicator
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates whether STTD can be used on the

downlink DPCH of the cell.
Instance
UTRAN Cell
ZWF26-01-003
HSDPA MIMO
HSDPA MIMO FG
0: Supported
1: Not Supported
Unit
N/A
Default Value
0: Not Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2875
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether STTD can be
used on the downlink DPCH/F-DPCH of a the cell.

Related factors: the actual capability of the cell
Configuration rule: If STTD can be used on the downlink
DPCH/F-DPCH of the cell, this parameter is set to True, otherwise,
the parameter is set to False.
The default value is "False", which means the actual cells generally
Reason
do not support STTD. This parameter should be configured based

on the actual cell capability.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.24 Closed Loop Mode 1 Support Indicator

Full Name
Closed Loop Mode 1 Support Indicator
Abbreviated Name
closedLoopMode1SuptInd
Managed Object
3GPP Name
Closed Loop Mode1 Support Indicator; Diversity Mode; TX Diversity

Mode
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.433
Description
This parameter indicates whether closed loop mode1 is supported

in the cell.This parameter indicates if the neighboring cell supports
Closed Loop Mode1. Open loop diversity or closed loop diversity
can be used for downlink physical channel. There is only mode 1
for closed loop diversity. When closed loop diversity is used, UE's
feedback is needed.
2-2876
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-40-022
Transmit Diversity
Transmit Diversity FG
0: Supported
1: Not Supported
Unit
N/A
Default Value
Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Function: his parameter indicates whether closed loop mode1 is
supported in the cell.

Configuration Rule:
It should be set according to the cell capability.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.25 Used UTRAN Registration Area

2-2877
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Used UTRAN Registration Area
Abbreviated Name
refUUtranRegArea
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates reference to UUtranRegArea object.
Instance
RNC
N/A
N/A
Basic ID parameter
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string[DBS_RR_MAX_URA]
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates reference to UUtranRegArea object.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2878
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.26 Cell Individual Offset

Full Name
Abbreviated Name
cellIndividualOffset
Managed Object
3GPP Name
3GPP Reference
TS 25.331
Description
Cell individual offset. An offset is allocated to each cell that is

monitored. The offset can be positive or negative. Before the UE
determines whether an event occurs, the offset should be added to
the measurement result. If the PCPICH uses a positive offset, the
UE sends the measurement report just like PCPICH is x dB better
than the actual case. Or, if the PCPICH uses a negative offset, the
PCPICH report is limited. When the cell individual offset is used, the
corresponding cell may be (at least temporarily) the target cell for
handovers or removed from the active set.
Instance
UTRAN Cell
ZWF21-03-001
ZWF21-03-002
Handover Control FG
(-50..50)dB, step 1 dB
Unit
dB
Default Value
0dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2879
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: controlling the handover difficulty
Related factors: handover difficulty, handover timeliness, handover

tendency
The smaller the parameter is, the easier it is to trigger handover. The
larger the parameter is, the more difficult it is to trigger handover.
For different neighboring cells, different values can be set to control
the handover tendency.
Adjustment suggestion: In scenarios where signals change quickly,
this parameter should be set to a smaller value to ensure handover
timeliness.
The default parameter value is set based on handover timeliness,
Reason
difficulty, and tendency.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.27 Used Iub Link

Full Name
Used Iub Link
Abbreviated Name
refUIubLink
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates reference to UIubLink object.
Instance
RNC
N/A
N/A
2-2880
SJ-20141209142030-013|2015-11-12 (R1.3)
Basic ID parameter
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates reference to UIubLink object.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.28 HCS_PRIO
Full Name
HCS_PRIO
Abbreviated Name
hcsPrio
Managed Object
3GPP Name
HCS_PRIO; HCS Prio
2-2881
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331;
TS 25.423;
TS 25.304
Description
This parameter indicates the HCS priority (0-7) for GSM cells. The
highest priority is 7, and the lowest priority is 0.
Instance
UTRAN Cell
ZWF21-03-005
ZWF21-03-021


0..7
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: HCS priority
Related factors: UE movement speed

The smaller the parameter is, the lower the priority of the UTRAN
cell is, and the easier it is for UEs at a high speed to reselect the cell.
The larger the parameter is, the higher the priority of the UTRAN cell
is, and the easier it is for UEs at a low speed to reselect the cell.
Reason
is not used.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2882
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.29 PCH Power

Full Name
PCH Power
Abbreviated Name
pchPower
Managed Object
3GPP Name
PCH Power
3GPP Reference
TS 25.433
Description
This parameter indicates the PCH transmit power mapped to the

SCCPCH, which is a power offset relative to the PCPICHpower.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Power Control FG / Node B Management FG
(-35..15)dB, step 0.1dB
Unit
dB
Default Value
-3dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2883
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the PICH transmit
power mapped to the SCCPCH.

Adjustment suggestion: The PCH power must be configured to
ensure that UEs at the edge of a cell can properly receive paging
messages and meanwhile avoid power waste.
If the parameter value is too small, it cannot properly receive paging
messages when the UE resides at the edge of the cell, which will
affect the downlink coverage.
interference to other downlink common channels, waste downlink
power, and affect system capacity.
When the PCH power is -3dB, it can ensure high paging success
Reason
rate and optimum system capacity.
Change Take Effect
No
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.112.30 Address
Full Name
Address
Abbreviated Name
address
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell address of the object.
Instance
RNC
N/A
2-2884
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
0..255
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.31 Quality Threshold Level for Applying Prioritised

Hierarchical Cell Reselection (QHcs) When Measurement
Quantity is CPICH Ec/No
Full Name
Quality Threshold Level for Applying Prioritised Hierarchical Cell

Reselection (QHcs) When Measurement Quantity is CPICH Ec/No
Abbreviated Name
qHcsEcNo
2-2885
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
3GPP Name
Qhcs
3GPP Reference
TS 25.331;
TS 25.304
Description
This parameter indicates the quality threshold level for applying

prioritized hierarchical cell reselection when the measurement
quantity is CPICH Ec/No.
Instance
UTRAN Cell
ZWF21-03-005
(-24..0)dB step 0.5dB
Unit
dB
Default Value
-12dB
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: quality threshold level for applying prioritized
hierarchical cell reselection when the measurement quantity is

CPICH Ec/No. It guarantees the access quality.
Related factors: HCS networking, change of signal
The smaller the parameter value is, the more easily criterion H
can be fulfilled and the easier it is to trigger cell reselection, and
vice versa.
Adjustment suggestion: HCS is not usually used. It is not suggested
to adjust this parameter.
The default parameter value is set based on the change of signal
Reason
quality.
Change Take Effect
No
2-2886
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.32 Quality Threshold Level for Applying Prioritised

Hierarchical Cell Reselection (QHcs) When Measurement
Quantity is CPICH RSCP
Full Name
Quality Threshold Level for Applying Prioritised Hierarchical Cell

Reselection (QHcs) When Measurement Quantity is CPICH RSCP
Abbreviated Name
qHcsRSCP
Managed Object
3GPP Name
Qhcs
3GPP Reference
TS 25.331;
TS 25.304
Description
This parameter indicates the quality threshold level for applying

prioritized hierarchical cell reselection when the measurement
quantity is CPICH RSCP.
Instance
UTRAN Cell
ZWF21-03-005
Unit
dBm
Default Value
-92dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-2887
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
No
Parameter function: quality threshold level for applying prioritized
hierarchical cell reselection when the measurement quantity is

CPICH RSCP. It guarantees the access quality.
Related factors: HCS networking, change of signal
The smaller the parameter value is, the more easily criterion H
can be fulfilled and the easier it is to trigger cell reselection, and
vice versa.
Adjustment suggestion: HCS is not usually used. It is not suggested
to adjust this parameter.
The default parameter value is set based on the change of signal
Reason
quality.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.33 Increment to the Minimum Required Received Level in the

Cell Configuration Tag
Full Name
Increment to the Minimum Required Received Level in the Cell

Configuration Tag
Abbreviated Name
deltaQrxlevminPre
Managed Object
3GPP Name
N/A
3GPP Reference
TS 25.304
Description
This parameter indicates whether DeltaQrxlevmin is set for a cell.
2-2888
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-03-005
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicator of whether to set DeltaQrxlevmin for a
cell to extend the range of cell reselection

When the parameter is set to True, Qrxlevmin=Qrxlevmin +
DeltaQrxlevmin.
Adjustment suggestion: It is suggested to configure this parameter
for cells with large radiuses.
Reason
No coverage extension is needed for normal cells.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2889
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.34 Used NodeB Common Measurement Profile

Full Name
Used NodeB Common Measurement Profile
Abbreviated Name
refUNbComMeasProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates reference to UNbComMeasProfile object.
Instance
RNC
ZWF21-01-002
Node Management FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter indicates reference to UNbComMeasProfile object.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2890
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.35 Used Traffic Volume Measurement Profile

Full Name
Used Traffic Volume Measurement Profile
Abbreviated Name
refUTrvMeasProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the DN (Distinguish Name) of UTrvMeasProfile.
Instance
UTRAN Cell
ZWF21-04-004
ZWF25-01-033
ZWF21-04-014

Adaptive HSUPA TTI

N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2891
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: indicates the distinguish name (DN) of the
UTrvMeasProfile object.
N/A
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.36 Used UE Internal Measurement Profile

Full Name
Used UE Internal Measurement Profile
Abbreviated Name
refUUeIntMeasProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the DN (Distinguish Name) of UUeIntMeasProfile.
Instance
UTRAN Cell
ZWF21-04-004
ZWF21-04-005
ZWF21-04-004
ZWF21-03-012
ZWF21-10-001
ZWF21-03-001
ZWF25-01-033
ZWF21-04-014
2-2892
SJ-20141209142030-013|2015-11-12 (R1.3)

Adaptive HSUPA TTI

Location Service FG
Handover Control FG
0..65535, step 1
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2893
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.112.37 T_Cell
Full Name
T_Cell
Abbreviated Name
tCell
Managed Object
3GPP Name
T Cell
3GPP Reference
TS 25.433
Description
This parameter indicates the time delay for setting the start time of
SCH, CPICH and DL scrambling codes in a cell related to the BFN.
Instance
UTRAN Cell
ZWF21-20-002
OMCR: (0..9*256)chip, step 256 chips

RNC: 0..9
Unit
256chips
Default Value
0 chip
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2894
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the time delay for
setting the start time of SCH, CPICH and DL scrambling codes in a

cell related to the BFN.
Related factors: number of intra-frequency cells, and whether this
cell is a secondary serving cell.
Configuration rule: the Tcell must be different in the same sector.
If the number of the intra-frequency cells is less than 10, the Tcell
of these cells must be different, and the default value is 0-9 in the
ascending order. If the number of the intra-frequency cells is greater
than 10, the value of the subsequent Tcell starts from 0 of the range
in cycling mode.
If the NodeB supports DC and this cell is a secondary serving cell of
a certain cell, then the Tcell of this cell must be the same as that cell.
The configuration rule mentioned above is guaranteed by the
configuration of network planning and optimizations.
The default value is 0, which is set based on the actual situation.
Reason
Change Take Effect
Yes
How to Impact
the cell will be deleted and reestablished.
Access
Read/Write
OMC Access path
N/A
N/A
2.112.38 Pathloss Scenario

Full Name
Pathloss Scenario
Abbreviated Name
cellScen
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the path loss scenario of a serving cell.

2-2895
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-04-001
Admission Control
0: Dense City Zone

1: Generic City Zone
2: Suburb
3: Country
Unit
N/A
Default Value
0: Dense City Zone
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicator of the path loss scenario, which is
used for downlink power evaluation in admission control

Related factors: actual network situation
This parameter should be set based on the actual network situation.
The greater the path loss is, the larger the evaluated power will be.
Reason
scenario.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2896
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.39 Used Service Area in BC Domain

Full Name
Used Service Area in BC Domain
Abbreviated Name
refUServiceAreaBc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Service Area Code (SAC) for the BC
domain that a cell uses. This parameter should be configured if the
cell supports the Cell Broadcast Service (CBS).
An SACPC uniquely identifies one or multiple cells that belong to
the same Location Area (LA). An SAC indicates the UE location for
Instance
UTRAN Cell
ZWF21-02-025
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
Yes
Function Switch
No
This parameter should be configured if the cell supports the CBS.

2-2897
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.40 Sector Identity

Full Name
Sector Identity
Abbreviated Name
sectorId
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is the sector identity of the cell.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
1..6
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-2898
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
This parameter is not be used now.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.41 Cell Description Type

Full Name
Cell Description Type
Abbreviated Name
cellDescripType
Managed Object
3GPP Name
Geographical Area
3GPP Reference
TS 25.331;
TS 25.413
Description
Cell description type, which indicates the type to describe the

cell, can be type of "polygon" or "arch", or "cell center + cell
radius". When RNC receives the message of RANAP LOCATION
REQUEST from CN, which requires reporting the location results
with Geographical Area (GA) of the cell, this parameter decides how
to fill in the location results in RANAP LOCATION REPORT.
Instance
UTRAN Cell
ZWF21-10-001
2-2899
SJ-20141209142030-013|2015-11-12 (R1.3)
Location Service FG

1: Polygon
2: Arc
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It is usually configured by 0.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.42 Polygon Point Number

Full Name
Polygon Point Number
Abbreviated Name
polygonPointNum
Managed Object
2-2900
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
Polygon
3GPP Reference
TS 25.413
Description
This parameter identifies how many points should be included in the

polygon of the cell. If the cell is described in type of "polygon", the
best number of points is decided during network planning. Each cell
is described with its own number of points.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
3.. MAX_POINT_NUM
And, MAX_POINT_NUM=15
Unit
N/A
Default Value
N/A
Related Parameters

Parameters

Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
The parameter is configured according actual cell condition.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-2901
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.112.43 Polygon Point Latitude Sign

Full Name
Polygon Point Latitude Sign
Abbreviated Name
polyLatitudeSign
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description
This parameter indicates the latitude direction of the polygon

whether the latitude direction of the polygon point is south or north.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: North
1: South
Unit
N/A
Default Value
N/A
Related Parameters

2-2902
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

Data Type
long[DBS_RR_MAX_POINT_NUM]
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.44 Degree of Polygon Point Latitude

Full Name
Degree of Polygon Point Latitude
Abbreviated Name
polyLatitude
Managed Object
3GPP Name
3GPP Reference
TS 25.413
2-2903
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the absolute value of the polygon point

latitude. When RNC receives the message of RANAP LOCATION
the geographical latitude of the polygon point.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0.. 90), step 1"; RNC: 0..2^23-1

When the value configed with OMCR is 90, the value in RNC is
2^23-1.
Unit
Degree
Default Value
N/A
Related Parameters

Parameters

Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
2-2904
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.112.45 Degrees of Polygon Point Longitude

Full Name
Degrees of Polygon Point Longitude
Abbreviated Name
polyLongitude
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description
This parameter indicates the value of the polygon point longitude.

the parameters to describe the cell in type of "polygon", indicating
the geographical longitude of the polygon point.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (-180.. 180), step 1"; RNC: 0..2^24-1

is 2^24-1 .
Unit
Degree
Default Value
N/A
Related Parameters

2-2905
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters

Data Type
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.46 Latitude Sign for Cell Center

Full Name
Latitude Sign for Cell Center
Abbreviated Name
latitudeSign
Managed Object
3GPP Name
3GPP Reference
TS 25.413
2-2906
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

location results in RANAP LOCATION REPORT.This parameter
indicates the latitude direction of the cell center. This parameter is
one of the parameters to describe the cell in type of "cell central
point".It indicates whether the latitude direction of the cell center is
south or north.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: North
1: South
Unit
Degree
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2907
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.112.47 Degree of Latitude for Cell Center

Full Name
Degree of Latitude for Cell Center
Abbreviated Name
latitude
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description

"cell center + cell radius".This parameter indicates the absolute
value of the latitude degree for the cell center. This parameter is one
of the parameters to describe the cell in type of "cell central point".It
indicates the geographical latitude of the cell center.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0.. 90), step 1"

RNC: 0.. 2^23-1
2^23-1.
Unit
Degree
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
2-2908
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
It is configured through actural test
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.48 Degrees of Longitude for Cell Center

Full Name
Degrees of Longitude for Cell Center
Abbreviated Name
longitude
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description

+ cell radius".This parameter indicates the absolute value of the
latitude degree for the cell center.
This parameter indicates the value of the longitude degree for the
cell center. This parameter is one of the parameters to describe
2-2909
SJ-20141209142030-013|2015-11-12 (R1.3)
the cell in type of "cell central point".It indicates the geographical

longitude of the cell center.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (-180.. 180), step 1"

RNC: 0..2^24-1
2^24-1
Unit
Degree
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2910
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.49 Cell Altitude for Cell Center

Full Name
Cell Altitude for Cell Center
Abbreviated Name
altitude
Managed Object
3GPP Name
Altitude
3GPP Reference
TS 25.413
Description

cell radius".It indicates the altitude for the cell center.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
(0..2^15-1)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
It is used in Cell ID/Cell ID+RTT survey, the measurement result is
returned to CN. It is configured according to cell condition.
N/A
Reason
Change Take Effect
No
2-2911
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.50 Direction of Altitude for Cell Center

Full Name
Direction of Altitude for Cell Center
Abbreviated Name
altitudeDir
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description

+ cell radius".It indicates whether the altitude direction of the cell
center is above or below the sea level.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: Height
1: Depth
Unit
N/A
Default Value
N/A
Related Parameters
N/A
2-2912
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.51 Altitude accuracy

Full Name
Altitude accuracy
Abbreviated Name
altitudeAcc
Managed Object
3GPP Name
Vertical Accuracy Code
3GPP Reference
TS 25.413
2-2913
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

cell radius", indicating the altitude accuracy.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
(0..990)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2914
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.52 Altitude accuracy Code

Full Name
Altitude accuracy Code
Abbreviated Name
uncertAltitude
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Altitude accuracy Code of cell
Instance
UTRAN Cell Related
ZWF21-10-001
Location service FG
0..127
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read
2-2915
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.53 Confidence
Full Name
Confidence
Abbreviated Name
confidence
Managed Object
3GPP Name
Confidence
3GPP Reference
TS 25.413
Description

cell radius". indicating the confidence of the position information.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
(0..100)%, step 1%
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
2-2916
SJ-20141209142030-013|2015-11-12 (R1.3)
It is configured according to cell condition.The Larger the value is,
the confidence the result is.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.54 Cell Radius

Full Name
Cell Radius
Abbreviated Name
cellRadius
Managed Object
3GPP Name
N/A
3GPP Reference
TS 25.413
Description
This parameter is one of the parameters to describe the cell in type

of "cell center + cell radius", indicating the cell radius. It takes the
cell center transmission antenna as the circle center.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
(0..1806627)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
2-2917
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.55 Horizontal Accuracy Code

Full Name
Horizontal Accuracy Code
Abbreviated Name
uncertCode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When UE maitain in a cell and RNC report the shape of the cell as
the UE's position based on CELLID position method, this parameter
indicates the UEhorizontal accuracy.
Instance
UTRAN Cell Related
ZWF21-10-001
2-2918
SJ-20141209142030-013|2015-11-12 (R1.3)
Location service FG
0..127
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.112.56 Geographical Area Report Type

Full Name
Geographical Area Report Type
Abbreviated Name
gARptType
Managed Object
3GPP Name
Geographical Area
2-2919
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.413
Description
This parameter indicates the geographical area report type of the

cell.when CN requires RNC to report the location result with the type
of Geographical Area (GA), this parameter decides the format of
the report in detail.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: Ellipsoid Point
1: Ellipsoid Point with Uncertainty Circle
2: Ellipsoid Point with Uncertainty Ellipse
3: Ellipsoid Point with Altitude
4: Ellipsoid Point with Altitude and Uncertainty Ellipsoid
5: List of Ellipsoid Points
6: Ellipsoid Arc
Unit
N/A
Default Value
N/A
Related Parameters
Parameters

Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2920
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.57 Antenna Type

Full Name
Antenna Type
Abbreviated Name
anteType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the type of the transmission antenna in

the cell.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: Omni Antenna
1: Beam Antenna
Unit
N/A
Default Value
0: Omni Antenna
Related Parameters
Parameters
are Valid
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
It is configured according to antenna condition.
N/A
Reason
2-2921
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.58 Antenna Latitude Sign

Full Name
Antenna Latitude Sign
Abbreviated Name
anteLatitudeSign
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description
This parameter indicates the latitude direction of the transmission

antenna is south or north.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: North
1: South
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
2-2922
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.59 Degree of Antenna Latitude

Full Name
Degree of Antenna Latitude
Abbreviated Name
anteLatitude
Managed Object
3GPP Name
Geographical Coordinates >Latitude
3GPP Reference
TS 25.413
Description
This parameter indicates the geographical latitude coordinates of

the transmission antenna in the cell.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0.. 90), step 1"; RNC: 0..2^23-1

2^23-1 .
2-2923
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
Degree
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.60 Degrees of Antenna Longitude

Full Name
Degrees of Antenna Longitude
Abbreviated Name
anteLongitude
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description
This parameter indicates the longitude of the transmission antenna

in the cell.
2-2924
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (-180.. 180), step 1"

RNC: 0..2^24-1
is 2^24-1 .
Unit
Degree
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.61 Antenna Altitude

2-2925
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Antenna Altitude
Abbreviated Name
anteAltitude
Managed Object
3GPP Name
Altitude
3GPP Reference
TS 25.413
Description
This parameter indicates the altitude of the transmission antenna

in the cell.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
(0..2^15-1)m, step 1m
Unit
meter
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-2926
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.112.62 Direction of Antenna Altitude

Full Name
Direction of Antenna Altitude
Abbreviated Name
anteAltitudeDir
Managed Object
3GPP Name
3GPP Reference
TS 25.413
Description
Direction of Antenna Altitude. This parameter indicates the altitude

of the transmission antenna of the cell is above or below the level.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: Height
1: Depth
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
0
2-2927
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.63 Offset Angle

Full Name
Offset Angle
Abbreviated Name
offsetAngle
Managed Object
3GPP Name
Offset angle
3GPP Reference
TS 25.413;
TS 25.453
Description

cell radius".This parameter is the offset angle of the transmission
antenna in the cell, which indicates the cells offset degree based on
the north direction.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0..360), step 1; RNC: (0..360)
Unit
Degree
Default Value
N/A
Related Parameters
2-2928
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameters
are Valid
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.64 Inner Angle

Full Name
Inner Angle
Abbreviated Name
innerAngle
Managed Object
3GPP Name
Inner Angle
3GPP Reference
TS 25.453
2-2929
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

"cell center + cell radius".This parameter indicates the inner angel of
the transmission antenna of the cell.
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
OMCR: (0..360), step 1; RNC: (0..360)
Unit
Degree
Default Value
N/A
Related Parameters
Parameters

Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A

configured according to cell condition.The wider the interior corner
is, the larger cell coverage is.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2930
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.65 HSPA Support Method

Full Name
HSPA Support Method
Abbreviated Name
hspaSptMeth
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the support of DCH, HSDPA and HSUPA

in the cell.
Instance
UTRAN Cell and PLMN

ZWF23-01-A
ZWF25-01-A
ZWF23-04-021

0: Not Support HSUPA and HSDPA;

1: Support HSDPA and DCH;
2: Support HSDPA only;
3: Support HSUPA , HSDPA and DCH;
4: Support HSUPA and HSDPA
Unit
N/A
Default Value
Support HSUPA , HSDPA and DCH
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-2931
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Main function: This parameter indicates the support of DCH, HSDPA
and HSUPA in the cell.

Influence factor: the actual capability of the cell; request of the
operator
The bigger the parameter is, the longer the timer of the user waiting
to access the UTRAN is.
The smaller the parameter is, the shorter the timer of the user
waiting to access the UTRAN is, however, the system cost may
be more higher.
The parameter can't be higher than the actual capability of the cell.
Support HSUPA, HSDPA and DCH. Reason: all ZTE cells support
HSPA.
The default value is the normal choice. The outfield should
Reason
considering all factors: the actual capability of the cell; request of

the operator.
Change Take Effect
Yes
How to Impact
The users assigned the downlink channel codes will drop when
those codes are redistributed to HS-SCCH, E-AGCH/E-RGCH in the
case of this values modified from 0~2 to 3~4.
Access
Read/Write
OMC Access path
N/A
N/A
2.112.66 MBMS Support Indicator

Full Name
MBMS Support Indicator
Abbreviated Name
mbmsSuptInd
Managed Object
2-2932
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether MBMS is supported in the cell.

MBMS (Multimedia Broadcast Multicast Service) is a function of
broadcasting or multicasting data from one source to multiple users.
The broadcast service includes two modes: general broadcast (only
PTM) and enhanced broadcast (alternative PTP and PTM).
For details, refer to TS 25.346.
Instance
UTRAN Cell
ZWF24-01-001
MBMS Services
MBMS FG
0: Not Supported
1: Support MBMS and not MBMS;
2: Only Support MBMS
Unit
N/A
Default Value
0: Not Supported
Related Parameters
SccpchCfgScene of UtranCellFDD
If MbmsSuptInd of UtranCellFD is 1 or2, SccpchCfgScene of
Parameters
UtranCellFDD can only be set to the value among 4~7, 10,

11; If MbmsSuptInd of UtranCellFD is 0, SccpchCfgScene of
UtranCellFDD can only be set to the value among 0~3, 8, 9.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: it indicates whether MBMS is supported in the
cell.
Related factors: network layout requirement, number of UEs that
expect to receive the MBMS service in the cell, and utilization of
network resource.
If there are a large number of UEs that expect to receive the MBMS
service in the cell and the parameter is set to support MBMS, the
network resource can be shared and the utilization of resource
can be improved.
N/A
Reason
Change Take Effect
2-2933
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.67 Multi-User Detection Support Indicator

Full Name
Multi-User Detection Support Indicator
Abbreviated Name
suptMulUsDetInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a switch that controls whether the

multi-user detection is supported in the cell.
Instance
UTRAN Cell
N/A
N/A
0: Not Support
1: Support
Unit
N/A
Default Value
0: Not Support
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
2-2934
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
Parameter function: This parameter indicates whether the multi-user
detection is supported in the cell.

Related factors: whether the NodeB and RNC support multi-user
detection.
Configuration rule: if this switch is enabled, the RNC will allocate the
short uplink scrambling codes when the NodeB supports multi-user
detections, and allocates the long uplink scrambling codes when the
NodeB does not support.
If the switch is disabled, the RNC will allocate the long uplink
scrambling codes during DPCH scrambling code allocations.
The default value is "Not Supported", which means the current
Reason
version of the NodeB cannot support multi-user detections.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.68 TUTRAN-GPS Measurement Support Indicator

Full Name
TUTRAN-GPS Measurement Support Indicator
Abbreviated Name
tutranGpsSptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports GPS-based

measurement.
Instance
UTRAN Cell
N/A
2-2935
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
The current version does not support GPS-based measurement.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.69 CS Traffic Preferred Indicator

Full Name
CS Traffic Preferred Indicator
Abbreviated Name
csTrafPrefInd
Managed Object
2-2936
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates CS traffic is preferred in the cell.
Instance
UTRAN Cell
ZWF21-04-022
ZWF21-04-004
Frequency Priority
0: CS No Preferred
1: CS Preferred
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: sets the CS preferred in the cell.
If the parameter is set to "1", this traffic is prior to be absorbed on

this cell.
If it is "0", this traffic is not expected to be accessed on this cell.
However, if the cell has capability to afford this traffic and other cells
load are high, this cell can also absorb this traffic.
The default value is set based on the cell and service characteristics.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2937
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.70 R99 PS Traffic Preferred Indicator

Full Name
R99 PS Traffic Preferred Indicator
Abbreviated Name
r99PsTrafPrefInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates R99 PS traffic is preferred in the cell.
Instance
UTRAN Cell
ZWF21-04-022
ZWF21-04-004
Frequency Priority
0: R99 PS No Preferred
1: R99 PS Preferred
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-2938
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the R99 PS preferred in the cell.

this cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.71 HS PS Traffic Preferred Indicator

Full Name
HS PS Traffic Preferred Indicator
Abbreviated Name
hsTrafPrefInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates HS PS traffic is preferred in the cell.
Instance
UTRAN Cell
ZWF21-04-022
Frequency Priority
0: HS PS No Preferred
1: HS PS preferred
Unit
N/A
2-2939
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: sets the HS PS preferred in the cell.

this cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.72 Use of HCS in Cell Reselection

Full Name
Use of HCS in Cell Reselection
Abbreviated Name
useOfHCS
Managed Object
3GPP Name
Use of HCS
3GPP Reference
TS 25.331
2-2940
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the HCS is used or not. HCS is

a mechanism that divides cells into different layers. In the case of
cell reselection and handover, the UE at high speed can be handed
over to the cell with low priority to improve system capacity and
ensure timely reselection/handover.
Instance
UTRAN Cell
ZWF21-03-005
ZWF21-03-021


1: Not Used
2: Used
Unit
N/A
Default Value
Not Used
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: HCS function switch
Related factors:
If the parameter value is "True", HCS will be used and H criteria will
be fulfilled for cell reselection. Normally, HCS is not used.
The default parameter value is set because HCS is not used in the
Reason
current network.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2941
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.112.73 UE Tx Power Switch for Handover

Full Name
UE Tx Power Switch for Handover
Abbreviated Name
ulPwrHoSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover switch based on uplink

transmit power. If the switch is "On", and the uplink transmit power
reaches a certain threshold configured on the OMCR, the RNC
will start the compressed mode and perform inter-frequency or
Instance
UTRAN Cell
ZWF21-03-012
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2942
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: handover switch based on uplink power
Related factors: system performance

If the parameter is set to 0, the handover based on uplink power
is not used.
If the parameter is set to 1, the handover based on uplink power is
used. In some scenarios, the uplink power reaches the maximum
extent but the QoS is still poor. The parameter needs to be set
to "True" to trigger handover to improve system performance.
Normally, the handover based event 2D can fulfill the quality
requirements, so this parameter can be set to 0.
The default parameter value is set to 0 because the handover based
Reason
on event 2D can fulfill the quality requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.74 UL BLER Switch for Handover

Full Name
UL BLER Switch for Handover
Abbreviated Name
ulBlerHoSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover switch based on uplink

BLER. If the switch is "On", and the uplink BLER reaches a
certain threshold configured on the OMCR, the RNC will start the
compressed mode and perform inter-frequency measurement.
Instance
UTRAN Cell
2-2943
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-03-013
Quality Based Handover
Quality Based Handover FG
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: handover switch based on uplink BLER

If the parameter is set to 0, the handover based on uplink BLER
is not used.
If the parameter is set to 1, the handover based on uplink BLER is
used. In some scenarios, the uplink BLER reaches the maximum
extent but the QoS is still poor. The parameter needs to be set
to "True" to trigger handover to improve system performance.
Normally, the handover based on event 2D can fulfill the quality
requirements, so this parameter can be set to 0.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2944
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.75 DL Tx Power Switch for Handover

Full Name
DL Tx Power Switch for Handover
Abbreviated Name
dlPwrHoSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the handover switch based on downlink

transmit power. If the switch is "On", and the downlink transmit
power reaches a certain threshold configured on the OMCR, the
RNC will start the compressed mode and perform inter-frequency
measurement.
Instance
UTRAN Cell
ZWF21-03-012
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-2945
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: DTCP handover switch

If the parameter is set to 0, the handover based on DTCP is not
used.
If the parameter is set to 1, the handover based on DTCP is used.
In some scenarios, the DTCP reaches the maximum threshold,
and signal quality is poor, the parameter should be set to "True" to
trigger handover to improve system performance. Normally, the
handover based on event 2D can fulfill the quality requirements, so
this parameter should be set to 0.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.76 SIB12 Indicator

Full Name
SIB12 Indicator
Abbreviated Name
sIB12Ind
Managed Object
3GPP Name
SIB12 Indicator
3GPP Reference
TS 25.331
Description
This parameter indicates whether SIB12 is broadcast in the cell.

If the switch is enabled, the UTRAN sends SIB12 in the cell.
If the switch is disabled, the UTRAN does not send SIB12 in the cell.
Instance
UTRAN Cell
ZWF21-03-005
2-2946
SJ-20141209142030-013|2015-11-12 (R1.3)
0: False
1: True
Unit
N/A
Default Value
0: FALSE
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether SIB12 is
broadcast in the cell.

Related factors: whether the FACH measuring information and the
measuring control information are same in connection and idle
mode, UTRAN system consumption, and time delay for UE reading
broadcast.
Configuration rule: if the FACH measuring information and the
measuring control information are same in connection and idle
mode, the SIB12 broadcast is not needed. If the switch is enabled,
SIB12 broadcast is needed. The UTRAN sends SIB12 in the cell,
which will be read by the UE, increasing the UTRAN resource
consumption and time delay for UE reading broadcast.
If the switch is disabled, the SIB12 will not be sent by the UTRAN
and not read by the UE, saving the UTRAN resources and the time
delay for UE reading broadcast.
The default value is "False", which means in default configuration,
Reason
the FACH measuring information and the measuring control

information are same in connection and idle mode.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2947
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.77 HSDPA Function Status

Full Name
HSDPA Function Status
Abbreviated Name
hsdStat
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell supports HSDPA , this parameter is used to activate

RAB setup/configuration/handover on HSDPA channel.Modification
of this parameter has no effect on the delete or setup of the HSDPA
channel.
Instance
UtranCell
ZWF23-01-A
DPA Introduction Package
0: Inactive
1: Active
Unit
N/A
Default Value
Related Parameters
HspaSptMeth
hsuStat
When HspaSptMeth is set 1(Support HSDPA and DCH), 2(Support
Parameters
HSDPA only), 3(Support HSUPA , HSDPA and DCH), 4(Support

HSUPA and HSDPA), hsdStat is valid.
be 0 (Inactive).
Data Type
long
Parameter Type
Negotiation With CN
No
2-2948
SJ-20141209142030-013|2015-11-12 (R1.3)
Function Switch
No
planning.Only when the cell possesses the HSDPA capability, the

parameter is valid.
Reason
Change Take Effect
Ongoing Connectionat next admission control (RAB

setup/configuration/handover, etc.)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.78 HSUPA Function Status

Full Name
HSUPA Function Status
Abbreviated Name
hsuStat
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell supports HSUPA , this parameter is used to activate

RAB setup/configuration/handover on HSUPA channel.Modification
of this parameter has no effect on the delete or setup of the HSUPA
channel.
Instance
UtranCell
ZWF25-01-A
2-2949
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Inactive
1: Active
Unit
N/A
Default Value
Related Parameters
HspaSptMeth
hsdStat
When HspaSptMeth is set 3(Support HSUPA , HSDPA and DCH),
Parameters
4(Support HSUPA and HSDPA), hsuStat is valid.

be 0 (Inactive).
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
planning.Only when the cell possesses the HSUPA capability, the

parameter is valid.
Reason
Change Take Effect
Ongoing Connectionat next admission control (RAB

setup/configuration/handover, etc.)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.79 MBMS Function Status

Full Name
MBMS Function Status
Abbreviated Name
mbmsStat
2-2950
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
When the cell supports MBMS , this parameter is used to activate

MBMS service.When the cell supports MBMS , this parameter is
used to activate RAB setup on MBMS channel.Modification of this
parameter has no effect on the delete or setup of the MBMS channel.
Instance
UtranCell
ZWF24-01-A
MS Introduction Package
MBMS FG
0: Inactive
1: Active
Unit
N/A
Default Value
Related Parameters
MbmsSuptInd
When MbmsSuptInd is set 1(Support MBMS and not MBMS), 2
Parameters
(Only Support MBMS), mbmsStat is valid.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is for future use.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-2951
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.112.80 Used Intra-frequency Measurement Profile

Full Name
Used Intra-frequency Measurement Profile
Abbreviated Name
ref1UIntraMeasProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of the intra-frequency measurement

profile object. A profile corresponds to a set of intra-frequency
measurement configurations. Each cell obtains the intra-frequency
measurement parameters based on the profile ID.
Instance
ZWF21-03-001
Handover Control FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: ID of the intra-frequency measurement profile
object
Related factors: actual network conditions to ensure that this
parameter is unique under the parent object
Reason
2-2952
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.81 Intra-frequency Measurement Profile Identity for Reserved

User
Full Name
Intra-frequency Measurement Profile Identity for Reserved User
Abbreviated Name
ref2UIntraMeasProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the profile ID of a set of intra-frequency

measurement parameters of reserved users. Each cell obtains
the intra-frequency measurement parameters of reserved users in
accordance with the profile ID.
Instance
UTRAN Cell
N/A
N/A
0..65535
Unit
N/A
Default Value
N/A
Related Parameters
UIntraMeasProfile,TrfCatIntraMIdx
N/A
Parameters
2-2953
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
string
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the profile ID of a set
of intra-frequency measurement parameters of reserved users.

Related factor: intra-frequency measurement parameters of
reserved users
This parameter should be set according to network planning.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.82 Used UE Inter-frequency Measurement Profile

Full Name
Used UE Inter-frequency Measurement Profile
Abbreviated Name
refUInterMeasProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of the inter-frequency measurement

profile object. A profile corresponds to a set of inter-frequency
measurement configurations. Each cell obtains the inter-frequency
measurement parameters based on the profile ID.
Instance
ZWF21-03-003
2-2954
SJ-20141209142030-013|2015-11-12 (R1.3)
Handover Control FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: ID of the inter-frequency measurement profile
object
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.83 Used Inter-RAT Measurement Profile

Full Name
Used Inter-RAT Measurement Profile
Abbreviated Name
refURatMeasProfile
Managed Object
2-2955
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ID of the inter-RAT measurement profile

object. A profile corresponds to a set of intra-RAT measurement
configurations. Each cell obtains the intra-RAT measurement
parameters based on the profile ID.
Instance
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: ID of the inter-RAT measurement profile object

Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2956
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.84 Cell Type

Full Name
Cell Type
Abbreviated Name
cellType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell type.
Instance
UTRAN Cell and PLMN
ZWF23-04-005
0: Macro Cell
1: Normal Cell
2: Micro Cell
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the cell type.
Configuration Rule: The parameter should be set according to cell

type in network planning.
2-2957
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.85 Background Noise Automatic Adjustment Scene

Full Name
Background Noise Automatic Adjustment Scene
Abbreviated Name
bgNoiScene
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Background Noise Automatic

Adjustment Scene, used to distinguish difficult scenarios from easy
scenarios The easier the adjustment is, the closer the noise floor in
high load cells is to the real noise floor, and the higher the probability
of incorrectly adjusting the noise floor in low load cells is.
Instance
UtranCell
ZWF21-04-012
Noise Automatic Measurement
Noise Level Measurement FG
0: Normal Scene
1: Easy Adjustment Scene
2: Difficult adjustment Scene
Unit
N/A
Default Value
0
2-2958
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: Background Noise Automatic Adjustment
Scene, used to distinguish difficult scenarios from easy scenarios.

The easier the adjustment is, the closer the noise floor in high load
cells is to the real noise floor, and the higher the probability of
incorrectly adjusting the noise floor in low load cells is. The more
difficult the adjustment is, the further the noise floor in high load cells
is to the real noise floor, and the lower the probability of incorrectly
adjusting the noise floor in low load cells is.
This parameter is set to "Easy Adjustment Scene" to satisfy
Reason
requirements of most cells.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.86 The Number of Consecutive In-Sync Indications NodeB

Received After which RL Restore Procedure Shall be
Triggered (N_INSYNC_IND)
Full Name
The Number of Consecutive In-Sync Indications NodeB

Received After which RL Restore Procedure Shall be Triggered
(N_INSYNC_IND)
Abbreviated Name
numInSyncInd
2-2959
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
3GPP Name
N_INSYNC_IND
3GPP Reference
TS 25.433
Description
When the radio link set is in the out-of-sync state, after receiving
N_INSYNC_IND successive in-sync indications Node B shall trigger
the RL Restore procedure and indicate which radio link set has
re-established synchronization. When the RL Restore procedure is
triggered, the state of the radio link set change to the in-sync state.
Instance
UTRAN Cell and PLMN
ZWF21-01-007
Radio Connection Monitor
1..256, step 1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: When the radio link set is in the out-of-sync state, after
receiving N_INSYNC_IND successive in-sync indications Node B

shall trigger the RL Restore procedure and indicate which radio
link set has re-established synchronization. When the RL Restore
procedure is triggered, the state of the radio link set change to the
in-sync state.
Configuration Rule:
In order to recovery the radio link in the out-of-sync state in time,
the parameter is set to relatively small value but not 1 to avoid the
Ping Pang state transition.
In order to recovery the radio link in the out-of-sync state in time,
Reason
the parameter is set to relatively small value but not 1 to avoid the
Ping Pang state transition.
Change Take Effect
Ongoing Connection(at new RL after the CELL RECONFIGURATION

REQUEST message)
2-2960
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.87 The Number of Consecutive Out-of-Sync Indications

NodeB Received After which the Timer T_RLFAILURE Shall
be Started (N_OUTSYNC_IND)
Full Name
The Number of Consecutive Out-of-Sync Indications NodeB

Received After which the Timer T_RLFAILURE Shall be Started
(N_OUTSYNC_IND)
Abbreviated Name
numOutSyncInd
Managed Object
3GPP Name
N_OUTSYNC_IND
3GPP Reference
TS 25.433
Description
When the radio link set is in the in-sync state, Node B shall start
timer T_RLFAILURE after receiving N_OUTSYNC_IND consecutive
out-of-sync indications. Node B shall stop and reset timer
T_RLFAILURE upon receiving successive N_INSYNC_IND in-sync
indications. If T_RLFAILURE expires, Node B shall trigger the RL
Failure procedure and indicate which radio link set is out-of-sync.
When the RL Failure procedure is triggered, the state of the radio
link set change to the out-of-sync state.
Instance
UTRAN Cell and PLMN
ZWF21-01-007
1..256, step 1
2-2961
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
70
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: When the radio link set is in the in-sync state, Node B
shall start timer T_RLFAILURE after receiving N_OUTSYNC_IND

consecutive out-of-sync indications. Node B shall stop and reset
timer T_RLFAILURE upon receiving successive N_INSYNC_IND
in-sync indications. If T_RLFAILURE expires, Node B shall trigger
the RL Failure procedure and indicate which radio link set is
out-of-sync. When the RL Failure procedure is triggered, the state
of the radio link set change to the out-of-sync state.
Configuration Rule:
The time length determined by this parameter and TRIFailure shall
not be smaller than the time length determined by N313 and T313 so
that the UE can trigger the radio link failure procedure before NodeB.
The time length determined by this parameter and TRIFailure shall
Reason
not be smaller than the time length determined by N313 and T313 so
that the UE can trigger the radio link failure procedure before NodeB.
Change Take Effect

REQUEST message)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2962
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.88 Timer Length for Trigger Radio Link Failure Procedure

After NodeB Receive N_OUTSYNC_IND Consecutive
Out-of-Sync Indication (T_RLFAILURE)
Full Name
Timer Length for Trigger Radio Link Failure Procedure After NodeB
Receive N_OUTSYNC_IND Consecutive Out-of-Sync Indication
(T_RLFAILURE)
Abbreviated Name
tRlFailure
Managed Object
3GPP Name
T_RLFAILURE
3GPP Reference
TS 25.433
Description
When the radio link set is in the in-sync state, Node B shall start
timer T_RLFAILURE after receiving N_OUTSYNC_IND consecutive
out-of-sync indications. Node B shall stop and reset timer
T_RLFAILURE upon receiving successive N_INSYNC_IND in-sync
indications. If T_RLFAILURE expires, Node B shall trigger the RL
Failure procedure and indicate which radio link set is out-of-sync.
When the RL Failure procedure is triggered, the state of the radio
link set change to the out-of-sync state.
Instance
UTRAN Cell and PLMN
ZWF21-01-007
OMCR: (0..25.5)s, step 0.1s

RNC: D=P*10, 0..255
Unit
Default Value
4s
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2963
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: When the radio link set is in the in-sync state, Node B
shall start timer T_RLFAILURE after receiving N_OUTSYNC_IND

consecutive out-of-sync indications. Node B shall stop and reset
timer T_RLFAILURE upon receiving successive N_INSYNC_IND
in-sync indications. If T_RLFAILURE expires, Node B shall trigger
the RL Failure procedure and indicate which radio link set is
out-of-sync. When the RL Failure procedure is triggered, the state
of the radio link set change to the out-of-sync state.
Configuration Rule:
The larger this parameter is, the later the radio link failure procedure
starts but the downlink interference increases. The shorter this
parameter is, the less opportunity is for the downlink radio link to
be synchronized again.
N/A
Reason
Change Take Effect

REQUEST message)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.89 Classified Zone Indicator

Full Name
Classified Zone Indicator
Abbreviated Name
classZoneInd
Managed Object
3GPP Name
N/A
3GPP Reference
TS 25.413
Description
This parameter identifies whether the local cell is the designated

zone or not.
2-2964
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF21-10-001
Location Service FG
0: False
1: True
Unit
N/A
Default Value
0: False
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
When UE is detected entering specific area from non-specific area,
or entering non-specific area from specific area, RNC refers the SAI
responding to the Cell-ID of current UE cell as positioning result,
and transmits location report to CN through Iu port.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.90 Detected Set Handover Switch

2-2965
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Detected Set Handover Switch
Abbreviated Name
detSetHoSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter starts the detected set switch for cells. If the switch
is "On", when the number of neighboring cells exceeds 32 and
the cells are reduced, the RNC needs to indicate UE to report the
measurement of the detected set in measurement control. When the
target cell in the detected set report submitted by the UE belongs
to the cell list that is cut because it contains more than 32 cells, the
RNC can perform a handover.
Instance
UTRAN Cell
ZWF21-03-001
Handover Control FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: detected set handover switch
Related factors: UE mobile continuity, call drop rate

If the parameter is set to 0, the handover based on detected set will
not be triggered. When the number of neighboring cells exceeds 32,
neighboring cells will be cut, and call drop may occur.
If the parameter is set to 1, the handover based on detected set will
be triggered to ensure UE mobile continuity.
The default parameter value is set based on UE mobile continuity
Reason
and call drop rate.
2-2966
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.91 Inter-frequency Handover Tactic

Full Name
Inter-frequency Handover Tactic
Abbreviated Name
interHoTactic
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the inter-frequency handover policy.

In most scenarios, this parameter is set to 2A Event Trigger, and
precise inter-frequency handovers can be ensured as long as the
target cell is better than the serving cell. In some scenarios where
handover quality needs to be better controlled, this parameter is set
to Algorithm Deciding or 2B Event Trigger. In some scenarios where
it is required to hand over to the target cell as soon as possible, this
parameter is set to 2C Event Trigger.
Instance
UTRAN Cell
ZWF21-03-003
Handover Control FG
0: Algorithm Deciding
1: 2A Event Trigger
2: 2B Event Trigger
3: 2C Event Trigger
2-2967
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
2A Event Trigger
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: triggering events for inter-frequency handover
Related factors: judgment accuracy

In most scenarios, this parameter is set to 2A Event Trigger, and
precise inter-frequency handovers can be ensured as long as the
target cell is better than the serving cell.
In some scenarios where handover quality needs to be better
controlled, this parameter is set to Algorithm Deciding or 2B Event
Trigger.
In some scenarios where it is required to hand over to the target cell
as soon as possible, this parameter is set to 2C Event Trigger.
The default parameter value is set based on the accuracy of
Reason
determination.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.92 Inter-RAT Handover Tactic

Full Name
Inter-RAT Handover Tactic
Abbreviated Name
ratHoTactic
2-2968
SJ-20141209142030-013|2015-11-12 (R1.3)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the inter-RAT handover policy.

In most scenarios, this parameter is set to 3A Event Trigger to
ensure precise inter-frequency handovers. In some scenarios where
it is required to hand over to the target cell as soon as possible, this
parameter is set to Algorithm Deciding or 3C Event Trigger.
Instance
UTRAN Cell
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
0: Algorithm Deciding
1: 3A Event Trigger
2: 3C Event Trigger
Unit
N/A
Default Value
3A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: triggering events for inter-RAT handover
Related factors: measurement accuracy

Event 3A means that the estimated quality of the currently used
UTRAN frequency is below a certain threshold and the estimated
quality of other systems is above a certain threshold, which is
better than event 3B and 3C, so event 3A is recommended for most
scenarios.
In some scenarios, if the inter-RAT handover is expected to be
triggered quickly, event 3C will be used because the triggering
condition can be fulfilled easily.
2-2969
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
measurement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.93 Maximum Allowable Rate on DCH to be Increased to When

UE is in Macro Diversity
Full Name
Maximum Allowable Rate on DCH to be Increased to When UE is

in Macro Diversity
Abbreviated Name
maxRateMD
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum rate threshold that DCH can
be increased to when UE is in the macro diversity.
Instance
UTRAN Cell and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
2-2970
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum allowable rate on DCH when
the UE is in macro diversity.

If this parameter is set to a greater value, the rate to be allowed is
higher, and the user experience is also better, but it is also easier
to increase the risk of call drop.
If this parameter is set to a smaller value, the rate to be allowed is
lower, but the user experience is worse.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.94 Maximum Bit Rate on DL DCH for NRT PS RAB in Serving

Cell
Full Name
Maximum Bit Rate on DL DCH for NRT PS RAB in Serving Cell
Abbreviated Name
nrtMaxDlRateDch
Managed Object
3GPP Name
N/A
2-2971
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate of a non-real-time PS

domain RAB in the serving cell that can be allowed on the DL DCH.
Instance
UTRAN Cell and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate on the downlink DCH
for non-real-time PS RAB in the serving cell.

Related factors: transmission bandwidth of the Iub interface, user
experience, and access success rate.
This parameter is applicable to situations where the transmission
bandwidth of the Iub interface is very limited. It can be used to
prevent the conversations of other users in a cell from being affected
by the high rate of an individual user in the cell.
If this parameter is set to a greater value, the allowable maximum
rate is higher, and the user experience is better. However, this may
easily affect the conversations of other users.
If this parameter is set to a smaller value, the allowable maximum
rate is smaller, and the access success rate is higher. However,
the user experience is poorer.
Reason
Change Take Effect
Ongoing Connection
No
2-2972
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.95 Maximum Bit Rate on UL DCH for NRT PS RAB in Serving

Cell
Full Name
Maximum Bit Rate on UL DCH for NRT PS RAB in Serving Cell
Abbreviated Name
nrtMaxUlRateDch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

domain RAB in the serving cell that can be allowed on the UL DCH.
Instance
UTRAN Cell and PLMN
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-2973
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets the maximum bit rate on the uplink DCH
for non-real-time PS RAB in the serving cell.

Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.96 UTRAN Measurement Quantity for Inter-frequency and

Inter-RAT Measurements
Full Name
UTRAN Measurement Quantity for Inter-frequency and Inter-RAT

Measurements
Abbreviated Name
nonIntraMeasQuan
Managed Object
3GPP Name
Measurement quantity for frequency quality estimate
3GPP Reference
TS 25.331
2-2974
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates UTRAN measurement quantity

for inter-frequency and inter-RAT measurements. For
inter-frequency/inter-RAT handover, the main factor that affects
signal quality is the distance between the cell and the base station,
Cpich RSCP is adopted. But for some specical scenario(such
as interference is very serious), Cpich EcNo and RSCP is more
suitable.
Instance
UTRAN Cell
ZWF21-03-003
ZWF21-03-004
ZWF21-03-110

Inter-RAT Mobility
Handover with LTE
Handover Control FG
0: Ec/No
1: RSCP
2: Ec/No and RSCP
Unit
N/A
Default Value
RSCP
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: inter-frequency/inter-RAT measurement
quantity, used for handovers evaluation

Related factors: measurement accuracy
Considering that Cpich EcNo is more precise than Cpich RSCP for
intra-frequency handover evaluation, Cpich EcNo is recommended.
In some scenarios, Cpich RSCP is good while Cpich EcNo is poor,
this parameter should be set to "Cpich RSCP and Cpich EcNo".
Reason
measurement.
Change Take Effect
No
2-2975
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.97 UTRAN Measurement Quantity for Intra-frequency

Measurements
Full Name
UTRAN Measurement Quantity for Intra-frequency Measurements
Abbreviated Name
intraMeasQuan
Managed Object
3GPP Name
3GPP Reference
TS 25.331
Description
This parameter indicates the measurement quantity for UTRAN

intra-frequency measurement. For intra-frequency scenarios, Cpich
Ec/No is generally used because the main factor that affects signal
quality is intra-frequency interference. But if the cell is located at
the edge of the coverage area, where the main factor that affects
signal quality is the distance between the cell and the base station,
Cpich RSCP is used. "Cpich EcNo and RSCP" is not used in the
current version.
Instance
UTRAN Cell
ZWF21-03-001
ZWF21-03-002
Handover Control FG
0: Ec/No
1: RSCP
2: Ec/No and RSCP
Unit
N/A
2-2976
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
Ec/No
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: intra-frequency measurement quantity, used
for handovers evaluation

Related factors: intra-frequency interference, measurement
accuracy
Considering that Cpich EcNo is more precise than Cpich RSCP for
intra-frequency handover evaluation, Cpich EcNo is recommended.
In some special scenarios, if Cpich RSCP can evaluate signal
variation more precisely, the parameter can be set to Cpich RSCP.
The default parameter value is set based on intra-frequency
Reason
interference and measurement accuracy.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.98 Used Power Control Profile Related to Service

Full Name
Used Power Control Profile Related to Service
Abbreviated Name
refUSrvPcProfile
Managed Object
2-2977
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the service-related power control

parameter profile (USrvPcProfile).A profile corresponds to a set
of service-related power control parameters. Each cell obtains
service-related power control parameters according to the
Distinguish Name (DN).
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Power Control FG
0..4000
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the service-related
power cntrol parameter profile (USrvPcProfile).

Related factors: According to the service-related power control
parameter profile (USrvPcProfile) to be required, configure the
service-related power control parameter profile (refUSrvPcProfile)
to be used.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2978
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A

Full Name
SIB4 Indicator
Abbreviated Name
sIB4Ind
Managed Object
3GPP Name
SIB4 Indicator
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-03-005
0: False
1: True
Unit
N/A
Default Value
0: FALSE
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2979
SJ-20141209142030-013|2015-11-12 (R1.3)

Related factors: whether the cell selection/reselection information
and the cell access restriction information are same in both
connection and idle mode, UTRAN system consumption, and time
Configuration rule: if the cell selection/reselection information and
the cell access restriction information are same in both connection
and idle mode, the SIB4 broadcast is not needed. If the switch is
enabled, SIB4 broadcast is needed. The UTRAN sends SIB4 in the
cell, which will be read by the UE, increasing the UTRAN resource
consumption and time delay for UE reading broadcast.
The default value is "False", which means in the default
Reason
configuration, the cell selection/reselection information and the cell

access restriction information are same in both connection and idle
mode.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
SIB6 Indicator
Abbreviated Name
sIB6Ind
Managed Object
3GPP Name
SIB6 Indicator
2-2980
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
TS 25.331
Description

Instance
UTRAN Cell
ZWF21-03-005
0: False
1: True
Unit
N/A
Default Value
0: FALSE
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No

Related factors: whether the common physical channel Information
and shared physical channel information and frequency information
of RNC supported are same in both connection and idle mode,
UTRAN system consumption, and time delay for UE reading
broadcast.
Configuration rule: if the common physical channel Information and
shared physical channel information and frequency information of
RNC supported are same in both connection and idle mode, the
SIB6 is not needed. If the switch is enabled, the SIB6 broadcast is
needed. The UTRAN sends SIB6 in the cell, which will be read
by the UE, increasing the UTRAN resource consumption and time
2-2981
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is "False", which means in the default
Reason
configuration, the common physical channel Information and shared

physical channel information and frequency information of RNC
supported are same in both connection and idle mode.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.101 PCCPCH Information in SIB6 Configuration Tag

Full Name
PCCPCH Information in SIB6 Configuration Tag
Abbreviated Name
pccpchInfSib6Pre
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the PCCPCH Information is

configured in SIB6.
Instance
UTRAN Cell
ZWF21-01-001
0: False
1: True
Unit
N/A
Default Value
True
Related Parameters
N/A
2-2982
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether the PCCPCH
Information is configured in SIB6.

Related factors: Primary CCPCH, a fixed rate (30 kbps, SF=256)
downlink physical channels used to carry the BCH transport channel.
Configuration rule: PCCPCH Information is configured in SIB6.
If the switch is enabled, the RNC sets the P-CCPCH information in
SIB6. If the switch is disabled, the RNC does not set the P-CCPCH
information in SIB6.
The default value is "TRUE", which is set based on the on-site
Reason
testing results.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.102 Dynamic Persistence Level Information of SIB6 PRACH

in SIB7 Configuration Tag
Full Name
Dynamic Persistence Level Information of SIB6 PRACH in SIB7

Configuration Tag
Abbreviated Name
prachSib6Pre
Managed Object
2-2983
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether dynamic persistence level

information of SIB6 PRACH is configured in SIB7.
Instance
UTRAN Cell
ZWF21-01-001
0: False
1: True
Unit
N/A
Default Value
False
Related Parameters
sIB6Ind
If sIB6Ind is False, prachSib6Pre must be False.
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether dynamic
persistence level information of SIB6 PRACH is configured in SIB7.

Related factors: The system information block type 6 contains
parameters for the configuration of the common and shared physical
channels to be used in connected mode. PRACH parameters are
most frequently used when UEs are in IDLE mode. Therefore, the
parameter is fixed to "False".
The system information block type 6 contains parameters for the
Reason
configuration of the common and shared physical channels to be

used in connected mode. PRACH parameters are most frequently
used when UEs are in IDLE mode. Therefore, the parameter is
fixed to "False".
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-2984
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.103 SIB7 Originator

Full Name
SIB7 Originator
Abbreviated Name
sIB7Originator
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates SIB7 is originated by the RNC or the

NodeB.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Power Control FG
0: NodeB
1: RNC
Unit
N/A
Default Value
NodeB
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
2-2985
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates SIB7 is originated by
the RNC or the NodeB.

Related factors: ensuring that real-time and accurate update of the
RTWP
The RNC need to originate the SIB7 based on the RTWP reported
through common Node B measurement, and therefore it is not
real-time and accurate.
The NodeB will update the RTWP in a more real-time and accurate
manner.
The NodeB will update the RTWP in a more real-time and accurate
Reason
manner.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.104 Cpich Ec/No Threshold for Blind Handover

Full Name
Cpich Ec/No Threshold for Blind Handover
Abbreviated Name
ecNoQualThrd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Cpich Ec/N0 threshold for blind

handovers in service reconfiguration. If the reported Cpich Ec/N0
is lower than or equal to EcNoQualThrd, blind handover will not
be triggered.
Instance
UTRAN Cell
ZWF21-04-022
2-2986
SJ-20141209142030-013|2015-11-12 (R1.3)
Frequency Priority
Unit
dB
Default Value
-13
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Cpich Ec/N0 threshold for blind handover in
service reconfiguration
If the Cpich Ec/N0 reported by the source cell is lower than or equal
to EcNoQualThrd, blind handover will not be triggered.
If the blind handover is reconfigured, and this parameter is too
small, UEs will trigger blind handover easily and thus drop calls. If
this parameter is large, it is difficult for UEs to trigger blind handover.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.105 Cpich RSCP Threshold for Blind Handover

2-2987
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Cpich RSCP Threshold for Blind Handover
Abbreviated Name
rscpQualThrd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Cpich Ec/N0 threshold for blind

handovers in service reconfiguration. If the reported Cpich RSCP
of the source cell is lower than or equal to RscpQualThrd, no blind
handover will be triggered.
Instance
UTRAN Cell
ZWF21-04-022
Frequency Priority
Unit
dBm
Default Value
-108
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: Cpich Ec/N0 threshold for blind handover in
service reconfiguration
If the reported Cpich RSCP of the source cell is lower than or equal
to RscpQualThrd, blind handover will not be triggered.
If the blind handover is reconfigured, and this parameter is too
small, UEs will trigger blind handover easily and thus drop calls. If
this parameter is large, it is difficult for UEs to trigger blind handover.
Reason
Change Take Effect
No
2-2988
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.106 DL TPC Pattern 01 Count

Full Name
DL TPC Pattern 01 Count
Abbreviated Name
dlTpcN
Managed Object
3GPP Name
DL TPC Pattern 01 Count
3GPP Reference
TS 25.433
Description
When the first radio link is established between the UTRAN and
the UE, the UTRAN will not be able to caculate the TPC using the
ordinary algorithm, before uplink synchronization is not obtained.
Therefore, it will transmit the fixed sequence number of downlink
TPC, including n instances of the pair of TPC commands ("0", "1")
and the last one instance of TPC command "1". This parameter
indicates the number (n) of instances of the pair of TPC commands
("0", "1"). If the n is 0, TPC pattern shall consist only of TPC
commands "1" . The TPC pattern continuously repeat but shall be
forcibly re-started at the beginning of each frame where CFN mod 4
= 0. The TPC pattern shall terminate once uplink synchronisation
is achieved.
Instance
UTRAN Cell
ZWF21-04-009
Power Control
Power Control FG
0..30
Unit
N/A
2-2989
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
14
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: Before the synchronization is complete on the
uplink, this parameter indicates the number of the downlink TPC

commands ("0", "1").
Related factors: This parameter is used to prevent the power from
being mistakenly adjusted by sending the TPC command (0 and
1 alternatively) before the synchronization is complete during the
establishment of the first link.
The greater this parameter, the longer the time of the initial transmit
power is maintained.
The smaller this parameter, the shorter the time of the initial transmit
power is maintained, and the higher probability of the incorrect TPC
information affecting the power.
The defalut value of this parameter can prevent the power from
Reason
being mistakenly adjusted before the synchronization is complete.
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.112.107 Cells for Reserved RUB Indicator

Full Name
Cells for Reserved RUB Indicator
2-2990
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
rubRsvdCellInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell has reserved RUB

resources.
If this cell has reserved RUB resources, the specific UE in the cell
will be required to access the reserved RUB board that provides
sufficient resources for the UE and prevents the access of the other
UEs.
If this cell has no reserved RUB resources, the accesses of all UEs
camped in this cell are allowed.
Instance
UtranCell
N/A
N/A
0: False
1: True
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
demonstration. It is configured in accordance with the actual

condition on field.
If the function is enabled, the UE for which RUB resources are
reserved can obtain sufficient user plane resources.
If this function is turned off, the accesses of all UEs camped in
the cell are allowed. No special RUB resources are reserved for
a specific UE.
Reason
demonstration.
2-2991
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.108 Switch of Fast Return to Eutran when Eutran CSFB CS

is released
Full Name
Switch of Fast Return to Eutran when Eutran CSFB CS is released
Abbreviated Name
csfbCsRel2LteSw
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates cell switch of fast return to EUTRAN for

CS service.If the switch is On, when CS is released, frequency of
Eutran is filled in redirection IE.
Instance
utranCell
ZWF21-03-111
Fast Return to LTE
0: Off
1: On
Unit
N/A
Default Value
0: Closed
Related Parameters
N/A
N/A
Parameters
2-2992
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
function of this parameter: This parameter indicates cell switch of
fast return to EUTRAN.

Factors of consideration: user experience and network feature.
If cell need to fast return to EUTRAN , this parameter is set 1,
otherwise 0.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.109 Maximum Allowed UL TX Power of RACH

Full Name
Maximum Allowed UL TX Power of RACH
Abbreviated Name
maxRachTxPwr
Managed Object
3GPP Name
Maximum allowed UL TX power
3GPP Reference
TS 25.331
Description
This parameter indicates the maximum UL transmit power used

by the RACH.
Instance
UTRAN Cell
ZWF21-03-005
ZWF21-04-009
2-2993
SJ-20141209142030-013|2015-11-12 (R1.3)

Power Control
Idle Mode and Common Channel Behavior FG / Power Control FG
Unit
dBm
Default Value
24dBm
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the maximum UL
transmit power used by the RACH.

Related factors: PRACH uplink coverage and interference to
neighboring cells. This parameter must be configured according
to the cell coverage to ensure that the UE at the cell edge can be
acknowledged by NodeB and meanwhile reduce interference to
neighboring cells.
The bigger this parameter, the bigger the PRACH uplink coverage.
The smaller this parameter, the smaller the PRACH uplink coverage.
For the default value of this parameter, PRACH uplink coverage and
Reason
interference to neighboring cells are considered.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2994
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.110 PRACH Configuration Scene

Full Name
PRACH Configuration Scene
Abbreviated Name
prachCfgScene
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates typical PRACH configuration scenarios.

The PRACH parameter can be set to different values to meet these
scenarios.
If the cell does not support enhanced uplink CELL_FACH, this
parameter is set to "0".
Otherwise, it is set to "1" or "2". If this parameter is set to "1", the
cell can save one AICH code resource of SF 256, but the R99 and
enhanced uplink CELL_FACH services share the same resource of
one PRACH. The UE's success access ratio will be reduced. If this
parameter is set to "2", the R99 and enhanced uplink CELL_FACH
services use different PRACH resources. The success access
ratio can be guaranteed, but the cell needs one more AICH code
resource of SF 256.
Instance
UtranCell
ZWF21-20-004
ZWF26-02-003
ZWF21-04-006
Common Channel Management

NodeB Management FG
2-2995
SJ-20141209142030-013|2015-11-12 (R1.3)
0:One PRACH Channel of R99

1:One PRACH Channel of R99 and One PRACH Channel of
Enhanced Uplink Fach with the Same Preamble Scrambling Codes
2: One PRACH Channel of R99 and One PRACH Channel of
Enhanced Uplink Fach with the Different Preamble Scrambling
Codes
3: Two PRACH Channels of R99 and One PRACH Channel of
Enhanced Uplink Fach with the Different Preamble Scrambling
Codes
4: Two PRACH Channels of R99 with the Different Preamble
Scrambling Codes
Unit
N/A
Default Value
Related Parameters
ULEFACHSupport of UtranCellFDD
If and only if ULEFACHSupport of UtranCellFDD is"1: Supported",
Parameters
this parameter must be set to 1" or"2"
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: PRACH configuration scenario.
Related factors: number of PRACHs required in a cell, whether the

cell supports enhanced uplink FACH, the consumption of downlink
code resources, and access success rate.
If the cell does not support enhanced uplink CELL_FACH, this
parameter is set to "0".
Otherwise, it is set to "1" or "2". If this parameter is set to "1", the
cell can save one AICH code resource of SF 256, but the R99 and
enhanced uplink CELL_FACH services share the same resource
of one PRACH. The UE's success access ratio will reduce. If this
parameter is set to "2", the R99 and enhanced uplink CELL_FACH
services use different PRACH resources. The success access
ratio can be guaranteed, but the cell needs one more AICH code
resource of SF 256.
By default, the cell does not support the enhanced uplink FACH
Reason
function and in normal cases, one R99 PRACH is enough.
Change Take Effect
Yes
3
2-2996
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
Related common transport channel will be deleted and setup again ..
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.112.111 DB DC-HSDPA Support Indicator

Full Name
DB DC-HSDPA Support Indicator
Abbreviated Name
dbHsdSuptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether DB DC-HSDPA is supported.

If supported, UE can use resource on two carriers of different
frequency band. The throughput is improved.
Instance
UTRAN Cell
ZWF26-03-002
Dual-Band DC-HSDPA
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-2997
SJ-20141209142030-013|2015-11-12 (R1.3)
cell.If operators buy this license, the value of this parameter is set
as "Supported"; otherwise, it is set as "Not Supported"
The default value is set based on whether the carrier has purchased
Reason
the license.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.112 Used DPI Application Service Scene Profile

Full Name
Used DPI Application Service Scene Profile
Abbreviated Name
refUDpiAppSrvProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell type that DPI applied. This type is
used to choose the DPI related parameters.
Instance
UTRAN Cell
ZWF27-01-100
2-2998
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Nomal Cell
1: Business Cell
2: Entertainment Cell
3: Self-defined Type 1
Unit
N/A
Default Value
0: Nomal Cell
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the cell type that DPI applied.
This type is used to choose the DPI related parameters.

Related Factor: the characteristic of the area which the cell covered.
This parameter is quoted here. It's not be adjusted.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-2999
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.113 Switch of CS Call Re-establishment Triggered by

Receiving the CELL UPDATE Message from UE when SRNC
is in Stable Status
Full Name
Switch of CS Call Re-establishment Triggered by Receiving the

CELL UPDATE Message from UE when SRNC is in Stable Status
Abbreviated Name
csSsUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Switch of CS Call Re-establishment

Triggered by Receiving the CELL UPDATE Message from UE when
SRNC is in Stable Status. If it is set to 1, the RNC can execute the
call re-establishment procedure when it receives the CELL UPDATE
message from the UE in Stable status.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3000
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: switch for the function of the Call
Re-establishment in specified call-flow.

Related factors: whether the call re-establishment function is turned
on or off, success rate of cell call re-establishment, call drop rate.
If the parameter is set to "on", the function is turned on, calls
may not be dropped in accordance with the call re-establishment
procedure. This helps to decrease call drop rate. But if the cell
call re-establishment success rate is low, the function needs to be
turned off.
If the parameter is set to "off", the function is turned off. In this case
it does not help decrease the call drop rate, but helps release calls
as soon as possible, and thus user experience may be better.
The default value is set based on the call drop rate, user experience
Reason
and cell call re-establishment success rate.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

is in Handover Flow
Full Name

CELL UPDATE Message from UE when SRNC is in Handover Flow
Abbreviated Name
csHoUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3001
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

SRNC is in Handover Flow. If it is set to 1, the RNC can execute the
message from the UE in the handover flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

turned off.
Reason
Change Take Effect
No
2-3002
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

is in RAB Setup Flow
Full Name

CELL UPDATE Message from UE when SRNC is in RAB Setup Flow
Abbreviated Name
csRsUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

SRNC is in RAB Setup Flow. If it is set to 1, the RNC can execute
the call re-establishment procedure when it receives the CELL
UPDATE message from the UE in the RAB setup flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-3003
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
Yes

turned off.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.116 Switch of CS Call Re-establishment Triggered by RAN

Network when SRNC is in Stable Status
Full Name
Switch of CS Call Re-establishment Triggered by RAN Network

when SRNC is in Stable Status
Abbreviated Name
csSsRnReestSwitch
Managed Object
2-3004
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

Triggered by RAN Network when SRNC is in Stable Status. If it is
turned on, the RNC can execute the call re-establishment procedure
when it detects RL related failure for CS call in Stable status.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

turned off.
Reason
Change Take Effect
No
0
2-3005
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

network when SRNC is in Handover Flow
Full Name
Switch of CS Call Re-establishment Triggered by RAN network

when SRNC is in Handover Flow
Abbreviated Name
csHoRnReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Triggered by RAN network when SRNC is in Handover Flow. If it is
when it detects Uu response time out for CS call in the handover
flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-3006
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
Yes

turned off.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

network when SRNC is in RAB Setup Flow
Full Name
Switch of CS Call Re-establishment Triggered by RAN network

when SRNC is in RAB Setup Flow
Abbreviated Name
csRsRnReestSwitch
Managed Object
2-3007
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description

Triggered by RAN network when SRNC is in RAB Setup Flow. If it is
when it detects Uu response time out for CS call in the RAB setup
flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

turned off.
Reason
Change Take Effect
No
2-3008
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

is in RB/Trch/Phych Reconfig Flow
Full Name

Reconfig Flow
Abbreviated Name
csRcUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the CS call re-establishment switch in an

RB/Trch/Phych Reconfig flow. If this parameter is set to 1, when
the SRNC receives a CELL UPDATE message from a UE in the
RB/Trch/Phych Reconfig flow, it re-establishes the call.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
2-3009
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the CS call
re-establishment switch in the specified call flow.

Related factors: whether the switch is turned on, the success call
re-establishment rate in the cell, and the call-drop rate.
If this parameter is set to 1, when the SRNC receives a CELL
UPDATE message from a UE in the RB/Trch/Phych Reconfig
flow, it re-establishes the call. This decreases the call-drop rate.
If the success call re-establishment rate in the cell is lower, it is
recommended to set this parameter to 0.
If this parameter is set to "0: Off", the call-drop rate is not decreased,
but user experiences may be improved due to faster call release.
The default setting is based on the call-drop rate, the user
Reason
experience, and the success rate of re-establishing calls in the cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.120 Switch of PS Call Re-establishment Triggered by

is in Stable Status
Full Name
Switch of PS Call Re-establishment Triggered by Receiving the

CELL UPDATE Message from UE when SRNC is in Stable Status
2-3010
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
psSsUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Switch of PS Call Re-establishment

SRNC is in Stable Status. If it is set to 1, the RNC can execute the
message from the UE in Stable status.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

turned off.
2-3011
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

is in Handover Flow
Full Name

CELL UPDATE Message from UE when SRNC is in Handover Flow
Abbreviated Name
psHoUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the Switch of PS Call Re-establishment

SRNC is in Handover Flow. If it is set to 1, the RNC can execute the
message from the UE in the handover flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
2-3012
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

turned off.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3013
SJ-20141209142030-013|2015-11-12 (R1.3)

is in RAB Setup Flow
Full Name

CELL UPDATE Message from UE when SRNC is in RAB Setup Flow
Abbreviated Name
psRsUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of PS call re-establishment

triggered when a CELL UPDATE message is received from a UE
when an SRNC is in an RAB Setup flow. If it is set to "1" (On), the
RNC executes a call re-establishment procedure when it receives a
CELL UPDATE message from the UE in the RAB Setup flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3014
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: switch for the function of Call Re-establishment
in a specified call flow.

Related factors: On/Off status of the call re-establishment function,
success rate of cell call re-establishment, and call-drop rate.
If this parameter is set to "1" (On), the function is enabled. In this
case, calls may not be dropped through the call re-establishment
procedure, which helps to decrease the call-drop rate. But if the
success rate of call re-establishment in the cell is low, the function
should be disabled.
If this parameter is set to "0" (Off), the function is disabled. In this
case, the call-drop rate may not be decreased, but user experience
may be better because calls can be released soon.
The default value is set based on the call-drop rate, user experience,
Reason
and the success rate of call re-establishment in a cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.123 Switch of PS Call Re-establishment Triggered by RAN

Network when SRNC is in Stable Status
Full Name
Switch of PS Call Re-establishment Triggered by RAN Network

when SRNC is in Stable Status
Abbreviated Name
psSsRnReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3015
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

triggered by an RAN network when an SRNC is in Stable status.
If it is set to "1" (On), the RNC executes a call re-establishment
procedure when the RAN detects an RL-related failure for PS calls
in Stable status.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

should be disabled.
Reason
Change Take Effect
No
2-3016
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

network when SRNC is in Handover Flow
Full Name
Switch of PS Call Re-establishment Triggered by RAN network

when SRNC is in Handover Flow
Abbreviated Name
psHoRnReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

triggered by an RAN network when an SRNC is in a Handover flow.
If it is set to "1" (On), the RNC executes a call re-establishment
procedure when the RAN detects Uu response time-out for CS calls
in the Handover flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-3017
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes

should be disabled.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

network when SRNC is in RAB Setup Flow
Full Name
Switch of PS Call Re-establishment Triggered by RAN network

when SRNC is in RAB Setup Flow
Abbreviated Name
psRsRnReestSwitch
Managed Object
3GPP Name
N/A
2-3018
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description

triggered by an RAN network when an SRNC is in an RAB Setup
flow. If it is set to "1" (On), the RNC executes a call re-establishment
procedure when the RAN detects Uu response time-out for PS calls
in the RAB Setup flow.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
1: On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes

should be disabled.
Reason
Change Take Effect
No
2-3019
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A

is in RB/Trch/Phych Reconfig Flow
Full Name

Reconfig Flow
Abbreviated Name
psRcUeReestSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the PS call re-establishment switch in an

RB/Trch/Phych Reconfig flow. If this parameter is set to 1, when
the SRNC receives a CELL UPDATE message from a UE in the
RB/Trch/Phych Reconfig flow, it re-establishes the call.
Instance
UTRAN Cell
ZWF21-01-008
0: Off
1: On
Unit
N/A
Default Value
0: off
Related Parameters
N/A
N/A
Parameters
2-3020
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the PS call
re-establishment switch.
Related factors: whether the switch is turned on, the success call
re-establishment rate in the cell, and the call-drop rate.
If this parameter is set to 1, when the SRNC receives a CELL
UPDATE message from a UE in the RB/Trch/Phych Reconfig
flow, it re-establishes the call. This decreases the call-drop rate.
If the success call re-establishment rate in the cell is lower, it is
recommended to set this parameter to 0.
If this parameter is set to "0: Off", the call-drop rate is not decreased,
but user experiences may be improved due to faster call release.
The default setting is based on the call-drop rate, the user
Reason
experience, and the success rate of re-establishing calls in the cell.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.127 Virtual Location Area Code

Full Name
Virtual Location Area Code
Abbreviated Name
virtualLac
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3021
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Virtual Location Area Code (LAC) of

the cell, and is used to expand the paging range.
Instance
UTRAN Cell
ZWF21-01-030
Expand Paging Area
Expanded Paging Area FG
0..65535
Unit
N/A
Default Value
65534
Related Parameters
N/A
N/A
Parameters
Data Type
long[2]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the virtual LAC of
the cell.
Configuration rule: the boundary of the LAC.
If the cell is at the boundary of an LAC, the virtual LAC is set to the
neighboring LAC.
defautly invalid Code
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3022
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.128 Scenario Type

Full Name
Scenario Type
Abbreviated Name
scenarioType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell scenario type of the engineering

parameter related to network planning and network optimization.
Instance
UTRAN Cell
N/A
N/A
Basic Parameter
N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: cell scenario type
Related factors: network planning
Reason
requirements.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
2-3023
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.129 Number of the Codes with SF =128 Ordered for OCNS

Full Name
Number of the Codes with SF =128 Ordered for OCNS
Abbreviated Name
oCNSCodeNumber
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of the SF128 codes reserved

for OCNS (OCNS: Orthogonal Channel Noise Source).
Instance
UTRAN Cell
ZWF21-40-009
OCNS
NodeB Auxiliary Function FG
0...MAX_NUM_OCNS_CODE, step 1
where MAX_NUM_OCNS_CODE = 30
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the number of the SF128 codes
reserved for OCNS (OCNS: Orthogonal Channel Noise Source).

Configuration Rule:
The larger the value is, the more SF128 codes are reserved as
OCNS code.
2-3024
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Reason
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.112.130 Code Node Number with SF =128 for OCNS

Full Name
Code Node Number with SF =128 for OCNS
Abbreviated Name
oCNSCode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the code index of SF =128 for OCNS.

(OCNS: Orthogonal Channel Noise Source).
Instance
UTRAN Cell
ZWF21-40-009
OCNS
NodeB Auxiliary Function FG
1..127, step 1
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long[DBS_RR_MAX_NUM_OCNS_CODE]
2-3025
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the starting code index of SF
=128 for OCNS. (OCNS: Orthogonal Channel Noise Source).

Configuration Rule:
This parameter defines the first OCNS code index. The OCNS code
should not collided with the existing downlink physical channels.
N/A
Reason
Change Take Effect
Yes
How to Impact
The cell will be deleted and reestablished.
Access
Read/Write
OMC Access path
N/A
N/A
2.112.131 Switch of CS 64kbps Establishment

Full Name
Switch of CS 64kbps Establishment
Abbreviated Name
cs64Switch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the CS64 kbps service accessing

in the cell is allowed or not.
If this switch is "Off", the traffic of CS 64 kbps is not allowed.
If this switch is "On", the traffic of CS 64 kbps is allowed.
Instance
UTRAN Cell
ZWF21-05-016
2-3026
SJ-20141209142030-013|2015-11-12 (R1.3)
Video Call Prohibited in Specific Area
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the switch of CS 64 kbps establishment
in the serving cell.

Configuration rule:
If the switch is on, the video service of CS 64 kbps can be accessed.
This may use many resources but provides a better user experience.
If the switch is off, the video service of CS 64 kbps cannot be
accessed.
If the operator does not want the video service to be accessed in
some particular areas, such as the bathroom, the switch should
be turned off.
Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3027
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.132 Cell F-DPCH Support Indicator

Full Name
Cell F-DPCH Support Indicator
Abbreviated Name
fDpchSuptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports F-DPCH.
Instance
Utran Cell
ZWF23-01-041
ZWF23-04-004


0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether the cell supports
F-DPCH.
Configuration Rule:
It should be set to "Supported" if the cell supports F-DPCH.
N/A
Reason
Change Take Effect
New Connection
No
0
2-3028
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.133 Cell Enhanced F-DPCH Support Indicator

Full Name
Cell Enhanced F-DPCH Support Indicator
Abbreviated Name
efdpchSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports Enhanced

F-DPCH or not
Instance
Utran Cell
ZWF26-01-010
ZWF23-04-004
Enhanced F-DPCH
Enhanced F-DPCH FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
2-3029
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
Enhanced F-DPCH or not.

Configuration Rule:
It should be set to "Supported" if the cell supports Enhanced
F-DPCH.
N/A
Reason
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.134 Cell 64QAM Support Indicator

Full Name
Cell 64QAM Support Indicator
Abbreviated Name
supt64QamInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the 64QAM

function or not.When 64QAM is used, downlink capacity can be
improved.
Instance
Utran Cell
ZWF26-01-001
64QAM for HSDPA
64QAM for HSDPA FG

2-3030
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function: This parameter indicates whether the cell supports the
64QAM function or not.

Configuration rule: Configure according to whether DL 64QAM
license of the cell is purchased by the operator.
Reason
according to whether DL 64QAM license of the cell is purchased

by the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.135 Cell MIMO Support Indicator

Full Name
Cell MIMO Support Indicator
Abbreviated Name
mimoSuptInd
Managed Object
2-3031
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the MIMO

function or not.
Instance
Utran Cell
ZWF26-01-003
HSDPA MIMO
HSDPA MIMO FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
R6Scpich
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
MIMO function or not.

Configuration Rule:
It should be set to "Supported" if the cell supports MIMO.
N/A
Reason
Change Take Effect
Yes
How to Impact
the cell will be deleted and reestablished.
Access
Read/Write
OMC Access path
N/A
N/A
2-3032
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.136 Cell CPC Support Indicator

Full Name
Cell CPC Support Indicator
Abbreviated Name
cpcSuptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the Continuous

Packet Connectivity (CPC) function or not. CPC includes DTX/DRX
and HS-SCCH LESS.The usage of DTX and DRX can reach the goal
of improving system capacity by reducing the efficiency of power
control.HS-SCCH Less can reduce control overhead of HS-SCCH in
order to improve capacity and reduce the delay of HSDPA service.
Instance
Utran Cell
ZWF26-01-A
CPC Package
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
CPC function or not.

Configuration rule: According to whether the operator has
purchased the CPC license for the cell.
Reason
according to whether the operator has purchased the CPC license

for the cell.
2-3033
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.137 Cell HSUPA 2ms TTI Support Indicator

Full Name
Cell HSUPA 2ms TTI Support Indicator
Abbreviated Name
tti2msSuptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the HSUPA 2ms
TTI function or not. Comparing with 10ms, 2ms ETTI can support
higher data rate and lower delay but has less coverage than 10ms.
Instance
UTRAN Cell Related
ZWF25-01-024
ZWF25-01-033

Adaptive HSUPA TTI

0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
2-3034
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
HSUPA 2ms TTI.

Configuration rule: Configure according to whether 2ms E-TTI
license of the cell is purchased by the operator.
Reason
to whether 2ms TTI license of the cell is purchased by the operator.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.138 Cell MIMO and DL64QAM Combined Capability Support

Indicator
Full Name
Cell MIMO and DL64QAM Combined Capability Support Indicator
Abbreviated Name
celMimo64QamInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the serving cell supports to

activate downlink MIMO and downlink 64QAM at the same time
2-3035
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
ZWF26-02-001
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Function of this parameter: it indicates whether the cell can active
the MIMO and downlink 64QAM at the same time in the radio link
setup or reconfiguration, .
Factors of consideration: the throughput of HSDPA.
If the operator turn on this function, it will increase the throughput of
HSDPA .Otherwise the throughput of HSDPA is limited.
Supt64QamInd indicates the cell supports the 64QAM in
downlink.MimoSuptInd indicates the cell supports the MIMO
function, but both the two parameters set to support do not means
the cell can active the MIMO and 64QAM in the radio link.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3036
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.139 Dual-Cell HS-DSCH Support Indication

Full Name
Dual-Cell HS-DSCH Support Indication
Abbreviated Name
dcHsdschSupptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether Dual-Cell HS-DSCH is supported

in this cell, which is a Dual-Cell HS-DSCH function switch at cell
level. It must be set to "1: Supported" if the Dual-Cell HS-DSCH
is used in the cell.
Instance
UTRAN Cell
ZWF26-0D-004
DC-HSDPA
DC-HSDPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: Dual-Cell HS-DSCH support indication, set
based on the cell capability and requirements of the operator.

Related factors: Dual-Cell HS-DSCH support capability of the cell,
requirements of the operator (commercial agreement).
Adjustment suggestion: This parameter indicates the Dual-Cell
HS-DSCH support indication, and is not adjustable.
Reason
on the operator's requirements.
Change Take Effect
2-3037
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.140 Switch of RRC Redirection Triggered by Radio Resource

Congestion
Full Name
Switch of RRC Redirection Triggered by Radio Resource Congestion
Abbreviated Name
rrcRdtSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a switch indicating whether RRC redirection

function triggered by radio resource congestion is open. If the
switch is off, when RRC Connection Request to be setup on
DCH/DCH is rejected because of radio resource congestion, RRC
redirection is not performed, and RRC connection can continue to
try to be created on the RACH/FACH. If the switch is on, when RRC
Connection Request to be setup on DCH/DCH is rejected because
of radio resource congestion, RRC redirection based on the value
of the parameter PriRedirectRat is allowed.
Instance
UTRAN Cell
ZWF21-05-021
ZWF21-04-010

Congestion Control

Congestion FG
2-3038
SJ-20141209142030-013|2015-11-12 (R1.3)
0: off
1: on
Unit
N/A
Default Value
0: off
Related Parameters
PriRedirectRat
Only when PriRedirectRat is 1, 2, 3, or 4, RrcRdtSwch can be set
Parameters
to 1.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the switch of RRC redirection triggered
by radio resource congestion.

Configuration rule:
If the switch is off, when the request to create a RRC connection on
DCH/DCH is rejected due to the radio resource congestion, the
request will not be redirected, and the system tries to create a RRC
connection on RACH/FACH.
If this switch is on, when the request to create a RRC connection
on DCH/DCH is rejected due to the radio resource congestion, the
system determines whether to redirect the request based on the
value of the PriRedirectRat parameter.
It is recommended to turn off this switch, so that when the request to
create a RRC connection on DCH/DCH is rejected due to the radio
resource congestion, the RRC connection can still be established
on FACN/RACH, thereby improving the RRC access success rate.
The default value takes the success rate of RRC access into
Reason
consideration.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3039
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.141 Prior Redirect RAT Indicator

Full Name
Prior Redirect RAT Indicator
Abbreviated Name
priRedirectRat
Managed Object
3GPP Name
N/A
3GPP Reference
TS 25.331
Description
This parameter indicates whether to provide the redirection

information when RRC connection request is rejected or RRC
connection is released because services are forced to release. If UE
receives the redirect cell information, it will try to access to UMTS by
the specified frequency or RAT.
Instance
UTRAN Cell
ZWF21-01-021
RRC Connection Redirect
RRC Connection Redirect FG
0: Off
1: Prior to Inter-Frequency, secondly to Inter-RAT (prior to GSM Cell)
2: Prior to Inter-Frequency, secondly to Inter-RAT (PS prior to
E-UTRA, CS prior to GSM)
3: Prior to Inter-RAT (prior to GSM), secondly to Inter-Frequency
4: Prior to Inter-RAT (PS prior to E-UTRA, CS prior to GSM),
secondly to Inter-Frequency
Unit
N/A
Default Value
3: Prior to Inter-RAT (prior to GSM), secondly to Inter-Frequency
Related Parameters
Twait of utranCell
(1)When PriRedirectRat is 1, 2, 3, or 4, Twait can't be 0.
Parameters
(2)Only when PriRedirectRat is 1, 2, 3, or 4, RrcRdtSwch can be

set to 1.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3040
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: sets whether to provide the redirection
information in the RRC Connection Reject message.

Configuration rule:
For the operator who has configured inter-frequency or inter-RAT
adjacent cells, if the switch is on, when the system is overloaded,
the UE can be redirected to the inter-frequency or inter-system
adjacent cell, and the user experience can be improved.
If the switch is off, when the system is overloaded, the UE cannot
be redirected to the inter-frequency or inter-system adjacent cell,
and the user experience is poor.
Set based on the actual networking requirements.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.142 Wait Time for RRC Connection Reestablishment

Full Name
Wait Time for RRC Connection Reestablishment
Abbreviated Name
twait
Managed Object
3GPP Name
Wait time
3GPP Reference
TS 25.331
Description
UE waiting time for the repeated accessing request after the UE
receives the RRC CONNECTION REJECT message.
This parameter is carried in the RRC CONNECTION REJECT
message and sent to the UE.
2-3041
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
ZWF21-01-002
(0..15)s, step 1s
Unit
Default Value
5s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Main function: This parameter indicates the value of the timer that
specifies the UE waiting time for the repeated accessing request

after the UE receives the RRC CONNECTION REJECT message.
Related factors: the time that is used by the UE to wait for accessing
the UTRAN, and the system resource consumption.
Configuration rule: if the parameter value is too high, the UE will
wait for a long time to access the UTRAN.
If the parameter value is too low, the UE will wait for a short time
to access the UTRAN after receiving the RRC CONNECTION
REFUSE message, but the system consumption will be increased
due to the redundant RRC connection request.
The default value is set based on the time that is used by the UE to
Reason
wait for accessing the UTRAN, and the system consumption.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3042
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.143 Downlink Enhanced CELL_FACH Support Indicator

Full Name
Downlink Enhanced CELL_FACH Support Indicator
Abbreviated Name
eFACHSpptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the Downlink Enhanced

CELL_FACH can be supported by the cell. By using this feature,
the downlink data in CELL_FACH state will be carried on HS-DSCH,
which can improve the performance in CELL_FACH state, and
shorten the delay in RRC setup.
Instance
UTRAN Cell
ZWF26-01-011
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: whether the Downlink Enhanced CELL_FACH
can be supported by the cell. This parameter should be set based

Related factors: DL Enhanced CELL_FACH capability of the cell,
Adjustment suggestion: This parameter is not adjustable. This
function can improve FACH performance, and shorten the RRC
setup delay. It is suggested to enable the function.
2-3043
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
on the operator's requirements.
Change Take Effect
Yes
How to Impact
Triggering PHYSICAL SHARED CHANNEL RECONFIGURATION
Access
Read/Write
OMC Access path
N/A
N/A
2.112.144 Uplink Enhanced CELL_FACH Support Indicator

Full Name
Uplink Enhanced CELL_FACH Support Indicator
Abbreviated Name
uLEFACHSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink enhanced CELL_FACH function

is available for a carrier. When the uplink enhanced CELL_FACH
function is supported, the uplink services in the CELL_FACH state
can be carried by the common E-DCH to achieve a relatively high
rate. Otherwise, the uplink services in the CELL_FACH state can
only be carried by the RACH with a relatively low rate.
Instance
UTRAN Cell
ZWF26-02-003
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Supported
2-3044
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
EFACHSpptInd
ULEFACHSupport is valid only when EFACHSpptInd of CelInfo is 1
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates the uplink enhanced
CELL_FACH function is available for a carrier.

Related factors: license. A carrier shall buy this function to deploy it.
0: The uplink services of CELL_FACH users are carried by the
RACH.
1: The uplink services of CELL_FACH users are carried by the
common E-DCH, which can support a higher uplink rate in the
CELL_FACH state.
It is a license parameter to be configured according to a carrier's
Reason
requirements.
Change Take Effect
Yes
How to Impact

Access
Read/Write
OMC Access path
N/A
N/A
2.112.145 Cell Dual Cell+MIMO Support Indicator

Full Name
Cell Dual Cell+MIMO Support Indicator
Abbreviated Name
cellDcMimoSupInd
Managed Object
2-3045
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports simultaneous

activation of Dual Cell and MIMO. If either of or both the primary cell
and secondary cell meet(s) the requirements of MIMO activation,
MIMO can be activated with DC-HSDPA in the cell(s).
Instance
UTRAN Cell
ZWF26-03-001
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: It indicates whether activating Dual Cell and
MIMO at the same time in the cell.

Related factors: network layout, and HSDPA throughput of UEs.
When the parameter is set to "Supported", the cell supports the
function of activating Dual Cell and MIMO simultaneously in the
Radio Link Setup message or Radio Link Reconfiguration message,
which can increase the HSDPA throughput of UEs, otherwise, this
cell does not support the function.
MimoSuptInd only indicates whether the cell supports the MIMO
function and DcHsdschSupptInd only indicates whether the cell
supports the Dual Cell function, but even both parameters are set to
"Supported", it does not mean that the cell can activate the MIMO
and Dual Cell functions in a radio link.
Reason
is not supported.
Change Take Effect
No
2-3046
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.146 Radio Capacity of Cell

Full Name
Radio Capacity of Cell
Abbreviated Name
radioCapacity
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Radio Capacity of Cell
Instance
UtranCell
ZWF21-20-003
Cell Management
Basic Parameter
(0..65535)Erl, step 1Erl
Unit
Erl
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-3047
SJ-20141209142030-013|2015-11-12 (R1.3)
The parameter wasn't be used by RNC.
N/A
Reason
Change Take Effect
Unmodifiable
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.147 Cell Load Scene

Full Name
Cell Load Scene
Abbreviated Name
loadScene
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell is highly loaded.
Instance
UTRAN Cell
ZWF21-04-009
ZWF21-04-002
Power Control
Overload Control
Power Control FG / Overload Control FG
0: Normal Load Cell

1: High Load Cell
Unit
N/A
Default Value
0: Normal Load Cell
2-3048
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether the cell is
highly loaded.
Related factors: cell load
1 (high load cell): The cell load parameter settings will degrade
service quality properly to meet capacity requirements.
0 (normal load cell): The cell load parameter setttings are normal,
whose service quality is better than that of 1-high load cell.
When a cell is often highly loaded, set this parameter to 1-high load
cell; otherwise, set it to 0-normal load cell.
As a network planning and optimization parameter, it must be
Reason
configured according to the cell load conditions.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.148 Balance Scene

Full Name
Balance Scene
Abbreviated Name
balanceScene
Managed Object
2-3049
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates typical balance scenarios. For each

scenario, the corresponding balance parameters can be set as
different values.
Instance
UTRAN Cell
ZWF21-04-011
ZWF21-04-022
Load Balancing
Frequency Priority
Load Balancing FG
0: Balance is Off
1: Balance is On
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
The parameter should be set based on the actual network
requirement.If "Balance is Off" is selected, there is no load/service

sharing among carriers. If "Balance is On"is selected, there is
load/service sharing among carriers.
This parameter should be set according to actual scenario.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-3050
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.112.149 SCCPCH Configuration Scene

Full Name
SCCPCH Configuration Scene
Abbreviated Name
sccpchCfgScene
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
The parameter indicates typical SCCPCH configuration scenarios.

The approviate scenario can be chosen according to whether MBMS
or CBS should be supported and whether 1, 2 or 3 SCCPCHs are
configured.For each scenario, the corresponding load balance
parameters can be set as different values.
Instance
UTRAN Cell Related
ZWF21-20-004
ZWF21-04-006
ZWF21-02-025
Common Channel Management

Code Resource Allocation
NodeB Management FG
0: 2 SCCPCHs are Configured, not Supporting MBMS, not

Supporting CBS
1: 2 SCCPCHs are Configured, not Supporting MBMS, Supporting
CBS
2: 1 SCCPCH is Configured, not Supporting MBMS, not Supporting
CBS
3: 1 SCCPCH is Configured, not Supporting MBMS, Supporting
CBS
4: 2 SCCPCHs are Configured, Supporting MBMS, not Supporting
CBS
2-3051
SJ-20141209142030-013|2015-11-12 (R1.3)
5: 2 SCCPCHs are Configured, Supporting MBMS, Supporting CBS

CBS
7: 3 SCCPCHs are Configured, Supporting MBMS, Supporting CBS
Supporting CBS
9: 3 SCCPCHs are Configured, not Supporting MBMS, Supporting
CBS
CBS
11: 4 SCCPCHs are Configured, Supporting MBMS, Supporting
CBS
Unit
N/A
Default Value

Supporting CBS
Related Parameters
mbmsSuptInd
If MbmsSuptInd of UtranCellFD is 1 or2, SccpchCfgScene of
Parameters
UtranCellFDD can only be set to the value among 4~7, 10,

11; If MbmsSuptInd of UtranCellFD is 0, SccpchCfgScene of
UtranCellFDD can only be set to the value among 0~3, 8, 9.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: The parameter indicates typical SCCPCH configuration
scenarios. For each scenario, the corresponding load balance

parameters can be set as different values.
Configuration rule: Based on the following requirement of the
operator: the opening of CBS, MBMS; the rate requirement of the
FACH carrying data, the capability requirement of the PCH of the
cell.
Based on the following requirement of the operator: the opening of
Reason
CBS, MBMS; the rate requirement of the FACH carrying data, the
capability requirement of the PCH of the cell.
Change Take Effect
Yes
How to Impact
The cell will be deleted and setup again.
2-3052
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A

Full Name
Abbreviated Name
hoCelSelScene
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

Instance
UTRAN Cell
ZWF21-03-001
ZWF21-03-002
ZWF21-03-003
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
Handover Control FG
0: Outdoor Scene
2: Indoor Scene
Unit
N/A
Default Value
2-3053
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No

If the cell belongs to an outdoor scenario, this parameter is set to 0.
If the cell belongs to an expressway scenario, this parameter is
set to 1.
If the cell belongs to an indoor scenario, this parameter is set to 2.
If the cell belongs to a subway/tunnel scenario, this parameter is
set to 3.
Reason
requirements.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.151 Cell Radius Scene

Full Name
Cell Radius Scene
Abbreviated Name
cellRadiusScene
Managed Object
2-3054
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
For each scenario, the corresponding parameters can be set as

different values.The parameter indicates scenarios related to cell
radius.
Instance
UTRAN Cell
N/A
N/A
Idle Mode and Common Channel Behavior
0: [0..5]km
1: [5..10]km
2: [10..40]km
3: [40..80]km
4: [80..200]km
5: [200..Infinity]km
Unit
km
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Function: Cell Radius Scene
Related factor: the actual cell radius

0: [0~5]km
1: [5~10]km
2: [10~40]km
3: [40~80]km
4: [80~200]km
5: [200~ Infinity]km
When the cell radius is larger than or equal to 80km, aichTranTime
should be set to 1. Otherise, aichTranTime should be set to 0.
the actual scene is considered to define this default value.
Reason
Change Take Effect
No
2-3055
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.152 Cell Available Subchannel Number Continuity Setting

Indicator
Full Name
Cell Available Subchannel Number Continuity Setting Indicator
Abbreviated Name
celAvaSubCha
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the RACH sub channels in a

cell are consecutive. A 12-bit string (111111111111) denotes the
sub channels are consecutive; 101010101010 or 010101010101
denotes the sub channels are configured every other one.
If this parameter is set to "On", the actual available sub channel
number is the configured "AvailSubChanNum".
If this parameter is set to "Off", the actual available sub channel
number is the calculation result of bitwise-AND "AvailSubChanNum
& (101010101010)" or "AvailSubChanNum & (010101010101)" with
maximum 1s.
Instance
UTRAN Cell
ZWF21-01-001
0: Available Subchannels of Cell Should be Nonconsecutive

1: Available Subchannels of Cell can be Consecutive
Unit
N/A
2-3056
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
CellRadius_Default
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: It indicates whether the available sub channels
are consecutive in the cell.

Related factors: cell radius, and random access time.
If this parameter is set to "0", the number of available sub channels
may be less than the configured AvailSubChanNum. The probability
of Node B receiving the same signature will be bigger, and the
random access time will be longer.
If this parameter is set to "1", the number of available sub channel
is the configured AvailSubChanNum. The probability of Node B
receiving the same signature will be smaller, and the random access
time will be shorter.
When the cell radius is large enough, the PRACH preambles from
the cell center and the cell border will be overlapped most at the
Node B reception antenna. If the cell radius is equal to or larger
than 200 km, namely, CellRadiusScene is set to "5", this parameter
should be set to "0". Otherwise, it is recommended to set this
parameter to "1".
The default value is set to make full use of the available sub-channel
Reason
resource of PRACH and the cell radius is less than 200 km in

general.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3057
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.153 Switch of Deferred SIB11/11bis/12 Support

Full Name
Switch of Deferred SIB11/11bis/12 Support
Abbreviated Name
defSibSuptSwch
Managed Object
3GPP Name
Deferred measurement control UTRAN support
3GPP Reference
TS 25.331
Description
This parameter indicates whether deferred SIB11/11bis/12 is

supported in a cell. To reduce service interruptions due to a UEs
reading system messages SIB11/11bis/12, particularly when there
are a large number of neighboring cells, the UE is allowed to send
messages on RACH or receive messages on FACH and make
responses before it reads SIB11/11bis/12. If SIB11/11bis/12 is large,
this parameter can be set to On to reduce the time to read system
messages.
Instance
UTRAN Cell
ZWF21-01-022
Deferred SIB11/12
Deferred SIB11/12 FG
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3058
SJ-20141209142030-013|2015-11-12 (R1.3)
To reduce service interruptions due to a UEs reading system
messages SIB11/11bis/12, particularly when there are a large

number of neighboring cells, the UE is allowed to send messages on
RACH or receive messages on FACH and make responses before it
reads SIB11/11bis/12. If SIB11/11bis/12 is large, this parameter can
be set to On to reduce the time to read system messages.
Parameter function: indicator of whether deferred SIB11/11bis/12 is
supported in a cell
Related factors: access delay
If the parameter is set to Off, deferred SIB11/11bis/12 read is not
enabled, which results in long access delay when there are a large
number of neighboring cells.
If the parameter is set to On, deferred SIB11/11bis/12 read is
enabled, which reduces system information read time and access
delay.
The default parameter value is set based on the access delay.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.154 Priority of Frequency Switch Off

Full Name
Priority of Frequency Switch Off
Abbreviated Name
freClosePri
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3059
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the priority of shutting down the carrier

intelligently. 0 is the highest priority.The bigger the value is, the
lower the priority is, and the easier the carrier is to be shut down.
Instance
UTRAN Cell
ZWF21-20-017
0..255
Unit
N/A
Default Value
N/A
Related Parameters
CloseFreFunSwit
FreClosePri is valid only when CloseFreFunSwit is 1.
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates the priority for shutting
down a carrier.
Configuration rule: This parameter is used for network planning
and optimization, and is set in accordance with the operator
requirements. In general, a cell with higher capability has a higher
priority, and a large cell has a higher priority than a small cell. For
example, a R99+R5+R6 cell has a higher priority than a R99 cell. A
macro cell has a higher priority than a micro cell.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-3060
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.112.155 Used Access Control Profile Related to Basic Priority

Full Name
Used Access Control Profile Related to Basic Priority
Abbreviated Name
refUBPriAcProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the index of an admission control

parameter related to the Basic Priority. For different requirements,
the set of admission control parameters can be configured
differently. Different cells can use this parameter to index different
configurations. The set of parameters corresponding to this index is
mapped from the Basic Priority.
Instance
UTRAN Cell
ZWF21-04-001
ZWF23-04-001
ZWF25-04-001
ZWF24-01-A
Admission Control
MBMS FG
0..255
Array[0..3]
Unit
N/A
Default Value
Related Parameters
ProfileId of UBPriAcProfile
refUBPriAcProfile of UUtranCellFDD must have the corresponding
Parameters
ProfileId with the same value in UBPriAcProfile.
Data Type
string
2-3061
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: index of an admission control parameter related
to the Basic Priority. This parameter can be used for different cells
to index different access control parameters based on the operator's
requirements.
Related factors: admission control parameters of the cell.
Adjustment suggestion: This parameter indicates the index of an
admission control parameter related to the Basic Priority, and is
not adjustable.
This parameter must have corresponding BPriAcIndex with the
Reason
same value in BPriAc.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.156 Used Scheduling Priority Mapping Relationship Profile

Full Name
Used Scheduling Priority Mapping Relationship Profile
Abbreviated Name
refUSchPriMappingProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3062
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Scheduling Priority configuration index.

There are several different sets of configuration of the Scheduling
Priority configured in RNC level which are identifiied by different
index and different cells can use this parameter to index the different
sets of the configuration separately.
Instance
UTRAN Cell
ZWF21-05-003
QOS Guarantee FG
0..255
Array[0..3]
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Function: This parameter indicates the Scheduling Priority
configuration index used for congestion scheduling. . There are

several different sets of configuration of the Scheduling Priority
configured in RNC level and different cells can use this parameter to
index the different sets of the configuration separately.
The default value is set for the Scheduling Priority configuration
Reason
index used for congestion scheduling.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
2-3063
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
2.112.157 Used Application Priority Mapping Relationship Profile

(Load Control)
Full Name
Used Application Priority Mapping Relationship Profile (Load

Control)
Abbreviated Name
ref1UAppPriMappingProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the application priority mapping relationship

profile (UAppPriMappingProfile) used in the load control algorithm.
Load control priorities of different cells can be mapped to different
application priority profiles according to this parameter.
Instance
UTRAN Cell
ZWF21-05-003
QoS Guarantee FG
0..4000
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3064
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the application priority
mapping relationship profile used in the load control algorithm.

Load control priorities of different cells can be mapped to different
application priority profiles according to this parameter.
Related factors: operator's requirements for load control application
priority.
Adjustment suggestion: According to the operator's requirements
for the load control, index load control priority to the required
UAppPriMappingProfile.
Operator requirements are considered.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.158 Used Application Priority Mapping Relationship Profile

(Congestion Control)
Full Name
Used Application Priority Mapping Relationship Profile (Congestion

Control)
Abbreviated Name
ref2UAppPriMappingProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3065
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the Application Priority mapping

relationship profile (UAppPriMappingProfile) used in the congestion
control algorithm. Congestion control priorities of different cells can
be mapped to different Application Priority profiles according to this
parameter.
Instance
UTRAN Cell
ZWF21-05-003
QOS Guarantee FG
0..4000
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: Application Priority mapping relationship profile
used in the congestion control algorithm.

Congestion control priorities of different cells can be indexed to
different Application Priority profiles based on this parameter.
Related factors: requirements for congestion control Application
Priority of the operator.
Adjustment suggestion: This parameter can index different
Application Priority profiles (UAppPriMappingProfile) based on
different operators requirements for the congestion control
Application Priority.
This parameter must have corresponding profileId with the same
Reason
value in UAppPriMappingProfile.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-3066
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.112.159 Non-Reserved CS User Number Threshold When

Reserved User Exists
Full Name
Non-Reserved CS User Number Threshold When Reserved User

Exists
Abbreviated Name
csNumThrd2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of non-reserved CS

users in CELL_DCH when reserved users exist in the current cell.
When the number of non-reserved users exceeds the threshold, the
RNC will forbid non-reserved users to access the cell of reserved
carrier and balance the users to non-reserved carriers.
Instance
UTRAN Cell
N/A
N/A
0..255
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
2-3067
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: maximum number of non-reserved CS users in
CELL_DCH when reserved users exist

non-reserved users
A larger value indicates that when reserved users exist in the cell,
more non-reserved CS users can be online in the cell and the
reserved users are less probable to preempt resources.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.160 Non-Reserved PS User Number Threshold When

Reserved User Exists
Full Name
Non-Reserved PS User Number Threshold When Reserved User

Exists
Abbreviated Name
psNumThrd2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of non-reserved PS

users in CELL_DCH when reserved users exist in the current cell.
When the number of non-reserved users exceeds the threshold, the
RNC will forbid non-reserved users to access the cell of reserved
carrier and balance the users to non-reserved carriers, or trigger
the R99 service.
2-3068
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
UTRAN Cell
N/A
N/A
0..255
Unit
N/A
Default Value
10
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
Parameter function: maximum number of non-reserved PS users in
CELL_DCH when reserved users exist

non-reserved users
A larger value indicates that when reserved users exist in the cell,
more non-reserved PS users can be online in the cell and the
reserved users are less probable to preempt resources.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3069
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.161 Dual Cell HSUPA Support Indication

Full Name
Dual Cell HSUPA Support Indication
Abbreviated Name
dcHsupaSupptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether dual-cell HSUPA is supported

in the cell. If dual-cell HSUPA is supported, the dual-cell HSUPA
subscribers can transmit data through the two cells with adjacent
frequencies simultaneously, and the maximum data rate can be
twice higher than that of a single cell.
Instance
UTRAN Cell
ZWF26-03-004
DC-HSUPA
DC-HSUPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates enabling or disabling
the dual-cell HSUPA function according to cell support capacity and

the operators requirement.
Related factors: The dual-cell HSUPA function is controlled by the
license. This function can be enabled only when the operator buys
the license.
Adjustment suggestion: The maximum uplink data rate of a dual-cell
HSUPA subscriber can be twice higher than that of a single-cell
subscriber.
2-3070
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.162 Switch of support the Eutran Neighbouring cell blacklist

Full Name
Switch of support the Eutran Neighbouring cell blacklist
Abbreviated Name
eutranNCblstSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable the EUTRAN neighbor

cell blacklist function. If this function is enabled, the EUTRAN cells
which are forbidden to be reselected or measured are notified to the
UE and the UE cannot search these cells. If this function is disabled,
such cells are not notified to the UE.
Instance
utranCell
ZWF21-03-100
ZWF21-03-110

Handover with LTE

0: Off
1: On
2-3071
SJ-20141209142030-013|2015-11-12 (R1.3)
Unit
N/A
Default Value
0: Closed
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether to enable the
EUTRAN neighbor cell blacklist function.

Related factors: user experience and network feature.
If there are EUTRAN cells that are not appropriate for UEs to camp
on, it is recommended to enable this function. After this function is
enabled, the cells that are forbidden to be reselected or measured
are notified to the UE, thus avoiding handover or reselection failure.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.163 Used HS-PDSCH Measurement Power Offset profile

Full Name
Used HS-PDSCH Measurement Power Offset profile
Abbreviated Name
refUMPOProfile
Managed Object
2-3072
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the used measurement power offset profile

of HS-PDSCH (UMPOProfile). It is the Distinguish Name (DN) of
UMPOProfile. Each cell obtains the HS-PDSCH measurement
power offset according to the profile DN specified by this parameter.
Instance
UTRAN Cell
ZWF23-04-005
0..4000
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
string
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the used
measurement power offset profile of HS-PDSCH (UMPOProfile).

Related factors: The used measurement power offset profile
of HS-PDSCH (refUMPOProfile) is configured according to
the corresponding UMPOProfile of the needed HS-PDSCH
measurement power offset.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-3073
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.112.164 Maximum Number of Users on HS-DSCH

Full Name
Maximum Number of Users on HS-DSCH
Abbreviated Name
hsdschTrafLimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of HS-DSCH users

in the cell. It will be guaranteed by the admission control mechanism.
Instance
UTRAN Cell
ZWF23-04-001
0..65535
Unit
N/A
Default Value
16
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: maximum number of HS-DSCH users in the
cell. It will be guaranteed by the admission control mechanism.

Related factors: maximum number of HS-DSCH users that the
NodeB can support in one cell, and the cell license.
Effect: The larger the parameter is, the more the HSDPA users are
admitted by a cell. The smaller the parameter is, the fewer the
HSDPA users are admitted by a cell.
2-3074
SJ-20141209142030-013|2015-11-12 (R1.3)
This parameter is set to the License value of the cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.165 Maximum Number of Users on E-DCH

Full Name
Maximum Number of Users on E-DCH
Abbreviated Name
edchTrafLimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of E-DCH users in

the cell. It will be guaranteed by the admission control mechanism.
Instance
UTRAN Cell
ZWF25-04-001
0..65535
Unit
N/A
Default Value
16
Related Parameters
N/A
N/A
Parameters
Data Type
long
2-3075
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
N/A
Parameter function: maximum number of E-DCH users in the cell. It
will be guaranteed by the admission control mechanism.

Related factors: maximum number of E-DCH users that the NodeB
can support in one cell, and the cell license.
Effect: The larger the parameter is, the more the E-DCH users are
admitted by a cell. The smaller the parameter is, the fewer the
E-DCH users are admitted by a cell.
This parameter is set to the License value of the cell.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.166 Cell Dual Band Dual Cell+MIMO Support Indicator

Full Name
Cell Dual Band Dual Cell+MIMO Support Indicator
Abbreviated Name
celDbMimoSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports activating Dual

Band Dual Cell and MIMO at the same time.
Instance
UTRAN Cell
ZWF26-04-002
2-3076
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Not Support
1: Support
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
supports activating Dual Band Dual Cell and MIMO at the same time.
Related factors: network deployment and HSDPA throughput of
the UE.
If the parameter is set to "1: Support", the cell supports activating
Dual Band Dual Cell and MIMO at the same time in the radio
link setup or reconfiguration, and this can increase the HSDPA
throughput of the UE. If the parameter is set to "0: Not Support", the
cell does not support activating Dual Band Dual Cell and MIMO at
the same time in the radio link setup or reconfiguration.
The MimoSuptInd parameter indicates whether the cell supports the
MIMO function. The DbHsdSuptInd parameter indicates whether
the cell supports the Dual Band Dual Cell function. If both of the two
parameters are set to "1: Support", this does not mean that the cell
can activate the MIMO and Dual Band Dual Cell in the radio link.
It is a License parameter and should be set based on the carrier's
Reason
requirements. The default setting is "0: Not Supported".
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
2-3077
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
N/A
2.112.167 Enhanced PCH Support Indicator

Full Name
Enhanced PCH Support Indicator
Abbreviated Name
epchSpptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the Enhanced

PCH function. This function allows the downlink data in CELL_PCH
state to be carried on the HS-DSCH, which improves the
performance in CELL_PCH state and shortens the delay for
switching from the CELL_PCH to another state.
Instance
UTRAN Cell
N/A
N/A
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
Yes
2-3078
SJ-20141209142030-013|2015-11-12 (R1.3)

function improves the PCH performance and shortens the paging
Reason
Change Take Effect
Yes
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.112.168 PICH Share Switch between Enhanced PCH and PCH

Full Name
PICH Share Switch between Enhanced PCH and PCH
Abbreviated Name
sharePichSwitch
Managed Object
3GPP Name
CHOICE HSDPA PICH
3GPP Reference
TS 25.433
2-3079
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the PICH is shared between the

enhanced PCH and PCH. If this parameter is set to "0: PICH not
shared between Enhanced PCH and PCH", a dedicated PICH
is added for the enhanced PCH, which can increase the paging
capacity of the cell but cost one more walshcode with SF as 256. If
this parameter is set to "1: PICH shared between Enhanced PCH
and PCH", the same PICH is shared between the enhanced PCH
and PCH, and the paging capacity of the cell is the same as that of
the cell that does not support the enhanced PCH.
Instance
UTRAN Cell
N/A
N/A
0: PICH not shared between Enhanced PCH and PCH

1: PICH shared between Enhanced PCH and PCH
Unit
N/A
Default Value
Related Parameters
epchPichNp
EPCHPichNp is valid only that SharePichSwitch is set to "0: PICH
Parameters
not shared between Enhanced PCH and PCH".
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter indicates whether the PICH is
shared between the enhanced PCH and PCH.

Related factors: system resource (radio resources or codes)
utilization, paging latency, and UE power consumption.
Adjustment suggestion: In the case where the paging capacity is not
restricted, the setting of "1: PICH shared between Enhanced PCH
and PCH" is recommended to save radio resources (codes).
In the case that the paging capacity is not restricted, the value of "1:
Reason
PICH shared between Enhanced PCH and PCH" is recommended

to save radio resources (codes).
Change Take Effect
Yes
2-3080
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
Access
Read/Write
OMC Access path
N/A
N/A
2.112.169 The Cell ID of Backup Cell

Full Name
The Cell ID of Backup Cell
Abbreviated Name
backupCellID
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

the CellID of the backup cell. The value 65535 indicates that this
Instance
External UTRAN Cell
ZWF21-30-206
RNC Pool for Node Redundancy FG
0..65535
Unit
N/A
Default Value
65535
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3081
SJ-20141209142030-013|2015-11-12 (R1.3)

function is needed.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.112.170 Cell DB-MC+MIMO Support Indicator

Full Name
Cell DB-MC+MIMO Support Indicator
Abbreviated Name
celDbMcMimoSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the Cell supports activating the

DB-MC and MIMO functions at the same time.
Instance
RNC
ZWF26-04-003
0: Not Supported
1: Supported
Unit
N/A
2-3082
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether the Cell supports activating

at the same time.
Usually, the equipment is of single antenna, so the default setting is
Reason
not supporting the MIMO function.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.171 Cell SB-MC+MIMO Support Indicator

Full Name
Cell SB-MC+MIMO Support Indicator
2-3083
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
celSbMcMimoSupInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the Cell supports activating the

SB-MC and MIMO functions at the same time.
Instance
RNC
ZWF26-04-003
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether the Cell supports activating

at the same time.
Usually, the equipment is of single antenna, so the default setting is
Reason
not supporting the MIMO function.
Change Take Effect
New Connection
2-3084
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.172 HSDPA 3 or 4 Carrier Supported Indication

Full Name
HSDPA 3 or 4 Carrier Supported Indication
Abbreviated Name
fourCHsdpaSptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether HSDPA 3 or 4 carrier is supported

in this cell (including HSDPA 3 or 4 carrier in Dual-Band, HSDPA 3
or 4 carrier and MIMO in Dual-Band). It is a cell-level switch, and
should be set to "1: Supported" if HSDPA 3 or 4 carrier is used in
the cell.
Instance
UTRAN Cell
ZWF26-04-001
4C-HSDPA
4C-HSDPA FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
2-3085
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether HSDPA 3 or
4 carrier is supported in this cell (including HSDPA 3 or 4 carrier

in Dual-Band, HSDPA 3 or 4 carrier and MIMO in Dual-Band). It
should be set in accordance with the cell capability and the carrier's
requirements.
Related factors: the cell's capability of supporting HSDPA 3 or 4
carrier and the carrier's requirements (commercial agreement).
Adjustment suggestion: This parameter is not adjustable.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.173 Switch of Fast Return to Eutran when Eutran SRVCC

CS is released
Full Name
Switch of Fast Return to Eutran when Eutran SRVCC CS is released
Abbreviated Name
srvccCsRel2LteSw
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3086
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the cell switch for fast return to EUTRAN
cell for the CS service. If the switch is turned on, the frequency
of EUTRAN is written to the Redirection IE when the CS service
is released.
Instance
utranCell
ZWF21-03-111
Fast Return to LTE
0: Off
1: On
Unit
N/A
Default Value
0: Closed
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: indicates the cell switch for fast return to
EUTRAN cell for the CS service.

Related factors: user experience and network feature. If the cells
need to fast return to EUTRAN, this parameter should be set to
1, otherwise 0.
This default value is set according to network planning and user
Reason
experience
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3087
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.174 The Number of UE Signalling Trace Data Collection

Configuration Index Related to Cell
Full Name
The Number of UE Signalling Trace Data Collection Configuration

Index Related to Cell
Abbreviated Name
fstCfgNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of configuration indexes of UE

signaling trace data collection related to a cell.
Instance
utranCell
N/A
N/A
0..DBS_RR_MAX_NUM_FST
Unit
N/A
Default Value
Related Parameters
InedxNo of R_FSTCFG
InedxNo of the record in table R_FSTCFG of RAP
Parameters
Data Type
long
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
This parameter refers to the InedxNo of the record in table
R_FSTCFG of RAP.
The default value 0 indicates that the table R_FSTCFG has no
Reason
record by default.
Change Take Effect
No
How to Impact
N/A
2-3088
SJ-20141209142030-013|2015-11-12 (R1.3)
Access
Read/Write
OMC Access path
N/A
N/A
2.112.175 UE Signalling Trace Data Collection Configuration Index

Related to Cell
Full Name
UE Signalling Trace Data Collection Configuration Index Related

to Cell
Abbreviated Name
refUSignalTraceCfg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the configuration index of UE signaling

trace data collection related to a cell.
Instance
utranCell
N/A
N/A
0..DBS_RR_MAX_NUM_FST-1
Unit
N/A
Default Value
Related Parameters
InedxNo of R_FSTCFG
InedxNo of the record in table R_FSTCFG of RAP
Parameters
Data Type
string[20]
Parameter Type
Don't Care
Negotiation With CN
No
Function Switch
No
This parameter refers to the InedxNo of the record in table
R_FSTCFG of RAP.
2-3089
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value 0 indicates that the table R_FSTCFG has no
Reason
record by default.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.112.176 Cell Unique Identifier

Full Name
Cell Unique Identifier
Abbreviated Name
cellUniqueId
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the unique identifier of the cell in the entire
network.
Instance
RNC
N/A
N/A
N/A
0..255
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
PlainText[&, '"<>#%/\?@]
2-3090
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter Type
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read
OMC Access path
N/A
N/A
2.112.177 Switch of Controlling HSUPA Service Initially Established

on 2ms E-TTI or 10ms E-TTI
Full Name
Switch of Controlling HSUPA Service Initially Established on 2ms

E-TTI or 10ms E-TTI
Abbreviated Name
hsupaIniEtti
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether 2ms or 10ms E-TTI is used for

initial HSUPA service establishment.
Instance
UTRAN Cell
ZWF25-01-033
Adaptive HSUPA TTI

2-3091
SJ-20141209142030-013|2015-11-12 (R1.3)
0: 10ms
1: 2ms
Unit
N/A
Default Value
0: 10ms
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: switch that determines whether 2ms or 10ms
E-TTI is used for initial HSUPA service establishment.

Related factors: operator requirements, user experience, and CE
This parameter is set to 2ms if the operator requires 2ms E-TTI for
initial HSUPA service establishment. Compared to 10ms E-TTI,
2ms E-TTI improves user experience on HSUPA service. However,
if the UE is located on the cell edge, user experience degrades and
more CE resources are consumed.
The default value is set according to CE resource consumption.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.112.178 Sending Times of Paging Message of CS

Full Name
Sending Times of Paging Message of CS

2-3092
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
pagingSendTimesCs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of times for sending

a paging message of CS.
Instance
UTRAN Cell
ZWF21-01-003
Paging
1..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
Yes
Function Switch
No
of times for sending a paging message of CS.

Related factors: paging success probability in the RAN side, and
paging resource congestion probability.
Configuration rule: if the parameter value is too high, more
paging resource is consumed, leading to high system resource
consumption. If the parameter value is too low, the paging success
probability will be lower.
The default value is 3 times, which is set based on increasing the
Reason
paging success probability in the RAN side, and decreasing the

paging resource congestion probability.
Change Take Effect
No
2-3093
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.112.179 Sending Times of Paging Message of PS

Full Name
Sending Times of Paging Message of PS
Abbreviated Name
PagingSendTimesPs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

paging message from the PS domain is sent.
Instance
UTRAN Cell
N/A
N/A
1..6
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3094
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: the maximum number of times that a paging
message from the PS domain is sent.

Related factors: This parameter must be configured to increase the
paging success ratio at the RAN side and reduce the probability of
congestion due to high resource consumption during paging.
If the parameter is too large, too many resources are consumed
during paging.
If this parameter is too small, the paging success probability may
be reduced.
The default value is set to 2 in accordance with the requirements for
Reason
increasing the paging success ratio at the RAN side and reducing
the probability of congestion caused by high resource consumption
during paging.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.112.180 Switch of Load Balance Based on the Number of FACH

UEs (CELL_PCH/URA_PCH->CELL_FACH)
Full Name
Switch of Load Balance Based on the Number of FACH UEs

(CELL_PCH/URA_PCH->CELL_FACH)
Abbreviated Name
cellP2FLBSw
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3095
SJ-20141209142030-013|2015-11-12 (R1.3)
Description

is enabled after UE state transition from CELL_PCH or URA_PCH
to CELL_FACH. If this switch is enabled in a multicarrier network,
and cells in the network have overlapping or inclusive coverage,
the FACH load can be balanced according to the numbers of
CELL_FACH UEs in these cells after UE state transition from
CELL_PCH or URA_PCH to CELL_FACH.
Instance
UTRAN Cell
ZWF21-04-033
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
FACHLBSw
Only when the parameter of FACHLBSw is set to "1: On", the
Parameters
parameter of CellP2FLBSw is valid.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: cell-level switch that enables or disables
the FACH load balancing feature after UE state transition from

CELL_PCH or URA_PCH to CELL_FACH in a multicarrier network
with coverage-overlapping cells.
Related factors: the number of UEs in PCH state in each cell, the
number of UEs in CELL_FACH state in each cell, and resources
used for bearing UEs in CELL_FACH state in each cell.
If this switch is enabled, FACH load balancing based on the number
of UEs in CELL_FACH state is allowed among cells with overlapping
coverage after UE state transition from CELL_PCH or URA_PCH
to CELL_FACH. The FACH load balancing feature can prevent too
many CELL_FACH UEs in some cells while too few CELL_FACH
UEs in the other cells. However, the balancing procedure causes
a delay and increases the number of cell update messages in the
target cells.
Reason
2-3096
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.112.181 Switch of Load Balance Based on the Number of FACH

UEs (CELL_DCH->CELL_FACH)
Full Name
Switch of Load Balance Based on the Number of FACH UEs

(CELL_DCH->CELL_FACH)
Abbreviated Name
cellD2FLBSw
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description

is enabled after UE state transition from CELL_DCH to CELL_FACH.
If this switch is enabled for a multicarrier network, and cells in the
network have overlapping or inclusive coverage, the FACH load can
be balanced according to the numbers of CELL_FACH UEs in these
cells after UE state transition from CELL_DCH to CELL_FACH.
Instance
UTRAN Cell
ZWF21-04-033
0: Off
1: On
Unit
N/A
Default Value
0: Off
2-3097
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
FACHLBSw
Only when the parameter of FACHLBSw is set to "1: On", the
Parameters
parameter of CellD2FLBSw is valid.
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: cell-level switch that enables or disables
the FACH load balancing feature after UE state transition

from CELL_DCH to CELL_FACH in a multicarrier network with
coverage-overlapping cells.
Related factors: the number of UEs in DCH state in each cell, the
number of UEs in CELL_FACH state in each cell, and resources
used for bearing UEs in CELL_FACH state in each cell.
If this switch is enabled, FACH load balancing based on the
number of UEs in CELL_FACH state is allowed among cells with
overlapping coverage after UE state transition from CELL_DCH to
CELL_FACH. The FACH load balancing feature can prevent too
many CELL_FACH UEs in some cells while too few CELL_FACH
UEs in the other cells. However, the balancing procedure causes
a delay.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.112.182 Fast Return Dch Switch

Full Name
Fast Return Dch Switch

2-3098
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
fastReturnDchSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not a UE in common state

transitions to DCH state as soon as possible when the UE receives a
paging message with the paging cause "terminating Conversational
Call".
If the switch is set to "1: On", the UE transmits to DCH state as
soon as possible.
If the switch is set to "0: Off", the RNC determines the state of the
UE based on traffic and services.
Instance
UTRAN Cell
ZWF21-01-003
ZWF21-05-029
Paging
Service
Voice Service Optimization for Common State
ZTE UMTS Voice service Optimization for Multi-RAB Feature Guide
0: Off
1: On
Unit
NA
Default Value
0:off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3099
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates whether a UE in
the common state changes to the DCH state as soon as possible

when the UE receives a paging message whose paging cause is
terminating Conversational Call.
Related factors: If this switch is enabled, the UE changes to the
DCH state as soon as possible. The subsequent signalings of the
UE are transmitted fast between the UE and the CN. It enables
users to connect calls more quickly.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.183 Smart Handover Switch

Full Name
Smart Handover Switch
Abbreviated Name
SmartHoSwch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables smart handover. When this

parameter is set to "1: On", the RNC determines a target cell for
handover based on Tm/Off information reported by UEs if there
exists scramble multiplexing.
Instance
UTRAN Cell
ZWF21-03-001
2-3100
SJ-20141209142030-013|2015-11-12 (R1.3)
0: Off
1: On
Unit
NA
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the smart handover switch.
It determines the target handover cell according to the Tm/Off

information reported by a UE.
Related factors: small cell scenarios or scenarios where the
scrambling code multiplexing rate is high.
In smart handover scenes, SFN offsets between cells are maintained
at the network side. If several cells have the same scrambling code
in the neighbor cell list, when a UE reports an intra-frequency event,
the RNC determines the target handover cell according to the
TM/OFF information and triggers relevant handover.
In scenarios where the scrambling code multiplexing rate is high,
the function should be enabled.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-3101
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.184 Switch of Absolute Priority based Reselection in

CELL_FACH State
Full Name
Switch of Absolute Priority based Reselection in CELL_FACH State
Abbreviated Name
priMeaReseFachSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not absolute priority-based

reselection in CELL_FACH state is supported.
Instance
UTRAN Cell
ZWF26-05-002
ZWF21-03-005
ZWF21-03-100
E-UTRAN Measurement for CELL_FACH

E-UTRAN Measurement for CELL_FACH FG

0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether reselections
based on absolute priorities in the CELL_FACH state are supported.

Related factor: network deployment of the operator.
2-3102
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set based on network deployment of the
Reason
operator.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.185 Switch of Measurement based Redirection to LTE When

RRC Setup
Full Name
Switch of Measurement based Redirection to LTE When RRC Setup
Abbreviated Name
measRrcRedi2LteSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether or not measurement-based

redirection to LTE is supported during RRC connection setup. The
measurement is controlled by LTE frequency measurement control
information carried in SIB19. When this parameter is set to "1: On",
E-UTRA frequency RACH reporting information is carried in SIB19
and UEs can be redirected to LTE during RRC connection setup
based on measurement results.
Instance
UTRAN Cell
ZWF26-05-002
ZWF21-03-111

Fast Return to LTE
2-3103
SJ-20141209142030-013|2015-11-12 (R1.3)

0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
redirection of measurement results to the LTE system is supported

in RRC setup. The measurement is controlled by the LTE frequency
measurement control information carried in SIB19.
Related factor: network deployment of the operator.
The default value is set based on network deployment of the
Reason
operator.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.186 Switch of Measurement based Fast Return to LTE for

UE in CELL_FACH State
2-3104
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Switch of Measurement based Fast Return to LTE for UE in

CELL_FACH State
Abbreviated Name
measFach2LteSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables measurement-based fast return

to LTE for UEs in CELL_FACH state. When this parameter is set
to "1: On", the UEs that support LTE measure LTE frequencies in
CELL_FACH state and are redirected to E-UTRAN frequencies
based on measurement results by the RNC.
Instance
UTRAN Cell
ZWF26-05-002
ZWF21-03-111

Fast Return to LTE

0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets whether a UE in the
CELL_FACH state can be triggered by measurement to quickly

return to the LTE network.
Related factor: traffic sharing between the LTE network and the
UMTS network.
If the operator requires that UEs supporting LTE can return to the
LTE network quickly, this function should be enabled.
2-3105
SJ-20141209142030-013|2015-11-12 (R1.3)
Reason
operator based on network deployment.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.187 Maximum Number of Users on E-DCH for High Cell Load

Full Name
Maximum Number of Users on E-DCH for High Cell Load
Abbreviated Name
edchTrafLimitHL
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum number of E-DCH UEs in a

cell when the cell load is high. The admission control mechanism
can ensure that the number of E-DCH UEs in a cell is not greater
than this threshold.
Instance
UTRAN Cell
ZWF21-04-039
0..65535
Unit
NA
Default Value
Related Parameters
N/A
2-3106
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter sets the maximum number
of E-DCH users in a cell when the cell is in high load state. It is

guaranteed by the admission control mechanism.
Related factors: the maximum number of E-DCH users that the
NodeB can support in one cell, and the cell license.
The larger the parameter value is, the more E-DCH users are
admitted by a cell. The smaller the parameter value is, the fewer
E-DCH users are admitted by a cell.
The default value is set lightly less than the value that is set for
Reason
normal cell load.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.188 Load Based Adaptive RRC Parameter Adjustment Switch

Full Name
Load Based Adaptive RRC Parameter Adjustment Switch
Abbreviated Name
loadAdapRrcParaSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-3107
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter enables or disables the load-based adaptive RRC

parameter adjustment function. When this parameter is set to "1:
On", some RRC related parameters, such as T300 and N300, can
be obtained based on the cell load.
Instance
UTRAN Cell
ZWF21-04-039
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the function switch of
load-based adaptive RRC parameter adjustment.

Configuration rule: Both the system capacity and success rate of
RRC connection setup should be considered.
If the switch is enabled, the RRC parameters vary at different load
levels of the cell.
If the cell load is high, reduce the number of RRC request
information to increase the system capacity.
If the cell load is low, the success rate of RRC connection setup is
better.
If the switch is disabled, the RRC parameters do not change, but in
the case of high cell load, the system capacity is lower.
Adjustment suggestion: It is recommended that this function is
enabled when the cell load is high.
Reason
Change Take Effect
No
2-3108
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.189 Load Based Adaptive DRBC Parameter Adjustment

Switch
Full Name
Load Based Adaptive DRBC Parameter Adjustment Switch
Abbreviated Name
loadAdapDrbcParSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the load-based adaptive DRBC

On", some DRBC related parameters, for example, the event 4A
threshold, can be obtained based on the cell load.
Instance
UTRAN Cell
ZWF21-04-039
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
2-3109
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
load-based adaptive DRBC parameter adjustment.

Configuration rule: Both the system capacity and service quality
should be considered.
If the switch is enabled, the service quality varies at different load
levels of the cell.
If the cell load is high, reduce the data rate to increase the system
capacity.
If the cell load is low, the service quality is better.
If the switch is disabled, the subscriber service quality is always
good. However, in the case of high cell load, the system capacity
is lower.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.190 Load Based Adaptive Admission Control Parameter

Adjustment Switch
Full Name
Load Based Adaptive Admission Control Parameter Adjustment

Switch
Abbreviated Name
loadAdapAcParaSwi
Managed Object
2-3110
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the load-based adaptive

admission control parameter adjustment function. When this
parameter is set to "1: On", some admission control related
parameters, for example, the maximum number of E-DCH UEs in a
cell, can be obtained based on the cell load.
Instance
UTRAN Cell
ZWF21-04-039
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
load-based adaptive admission control parameter adjustment.

Configuration rule: Both the system capacity and service quality
should be considered.
If the switch is enabled, the service quality varies at different load
levels of the cell.
If the cell load is high, reduce the service number carried on the
E-DCH or use other admission control methods to increase the
system capacity.
If the cell load is low, the service quality is better.
If the switch is disabled, the subscriber service quality is always
good. However, in the case of high cell load, the system capacity
is lower.
Reason
2-3111
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.191 Load Based Adaptive Paging Parameter Adjustment

Switch
Full Name
Load Based Adaptive Paging Parameter Adjustment Switch
Abbreviated Name
loadAdapPagParaSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the load-based adaptive paging

On", some paging related parameters, such as T300 and N300, can
be obtained based on the cell load.
Instance
UTRAN Cell
ZWF21-04-039
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
2-3112
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is the function switch of load
based adaptive paging parameter adjustment.

Configuration rule: Both the system capacity and paging success
rate should be considered.
If the switch is enabled, the paging parameters vary at different
downlink load levels of the cell.
If the cell downlink load is high, reduce the maximum number of
paging to increase the system capacity.
If the cell downlink load is low, the paging success rate is better.
If the switch is disabled, the maximum number of paging does not
change, and in the case of high cell downlink load, the system
capacity is lower.
enabled when the cell downlink load is high.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.192 The Cell Lever Switch for Attempting Switching to

the CELL_FACH State After Congestion when PS RB
Establishment
2-3113
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
The Cell Lever Switch for Attempting Switching to the CELL_FACH

State After Congestion when PS RB Establishment
Abbreviated Name
toFbyCongCellSwi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a cell-level switch that is used for determining

whether to attempt CELL_FACH admission for PS RB establishment
or not when the network is congested.
Instance
RNC
ZWF21-04-037
Admission Control Enhancement in Resource Congestion
0: Off
1: On
Unit
NA
Default Value
Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter is a cell-level switch that is used
for controlling whether to attempt the admission in the CELL_FACH

state for the PS RB establishment when the network is congested.
This function helps prevent the PS service from attempting RRC
connections too many times after it is denied in CELL_DCH. It helps
reduce the network signaling load.
Reason
Change Take Effect
No
2-3114
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.193 Multiflow HSDPA Supported Indication

Full Name
Multiflow HSDPA Supported Indication
Abbreviated Name
mfHsdpaSupptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether Multiflow HSDPA is supported in

a cell. It is a cell-level switch for the Multiflow HSDPA function. It
must be set to "1: Supported" if the Multiflow HSDPA function is
enabled in the cell.
Instance
Utran Cell
ZWF26-05-001
Multi-Flow HSDPA
Multi-Flow HSDPA FG
0: Not Supported
1: Supported
Unit
NA
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
2-3115
SJ-20141209142030-013|2015-11-12 (R1.3)
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter indicates whether Miltiflow
HSDPA is supported in the cell. Whether Miltiflow HSDPA is

supported depends on the cell capability and operator requirements.
Related factors: Miltiflow HSDPA support capability of the cell,
operator requirements (commercial agreement).
Adjustment suggestion: This parameter indicates whether Miltiflow
HSDPA is supported.
This parameter is a license parameter and the default value is set
Reason
based on the operator's requirements.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.194 RACH Self-Optimization Function Switch

Full Name
RACH Self-Optimization Function Switch
Abbreviated Name
rachOptSwh
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a cell supports the RACH

self-optimization function or not. 0: RACH self-optimization is not
supported.
1: RACH self-optimization is supported.
Instance
UTRAN Cell
2-3116
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-04-040
Load Adaptive RACH
ZTE UMTS Load Adaptive RACH FG
0: Not Supported
1: Supported
Unit
NA
Default Value
0Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Related factors: cell uplink load and PRACH load, and operator
requirements.
Adjustment suggestion: This function can be used in cells of high
uplink load to reduce the contribution of PRACH preambles to the
uplink load.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.195 Downlink E-UTRAN Absolute Radio Frequency Channel

Number for Indicating Frequency Priority
2-3117
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Downlink E-UTRAN Absolute Radio Frequency Channel Number

for Indicating Frequency Priority
Abbreviated Name
dlEARFCN
Managed Object
3GPP Name
EARFCN
3GPP Reference
TS 25.331
Description
This parameter indicates the downlink E-UTRAN Absolute Radio

Frequency Channel Number (EARFCN). This parameter and the
frePrio4EHoRedi parameter are used in pairs, and there is a
one-to-one correspondence between each frequency in dlEARFCN
and the priority in frePrio4EHoRedi.
F_DL = F_DL_low + 0.1 (N_DL - N_Offs-Dl), where F_DL is
the centre carrier frequency, F_DL_low is the lowest downlink
carrier frequency, N_DL is DlEARFCN, and N_Offs-Dl is the carrier
frequency offset indicated by the band indicator.
DBS_FP_MAX_NUM_EUTRAN_FREQ is the maximum number of
neighbor EUTRAN centre frequencies, with the value of 16.
Instance
UTRAN Cell
ZWF21-03-111
Fast Return to LTE

1950-2399, Band 5: 2400-2649, Band 6: 2650-2749, Band 7:
2750-3449, Band 8: 3450-3799, Band 9: 3800-4149, Band 10:
4150-4749, Band 11: 4750-4949, Band 12: 5010-5179, Band 13:
5180-5279, Band 14: 5280-5379, Band 17: 5730-5849, Band 18:
5850-5999, Band 19: 6000-6149, Band 20: 6150-6449, Band 21:
6450-6599, Band 22: 6600-7399, Band 23: 7500-7699, Band 24:
7700-8039, Band 25: 8040-8689, Band 26: 8690-9039, Band 27:
9040-9209, Band 28: 9210-9659, Band 29: 9660-9769, Band 33:
36000-36199, Band 34: 36200-36349, Band 35: 36350-36949,
Band 36: 36950-37549, Band 37: 37550-37749, Band 38:
37750-38249, Band 39: 38250-38649, Band 40: 38650-39649,
Band 41: 39650-41589, Band 42: 41590-43589, Band 43:
43590-45589, Band 44: 45590-46589
Unit
N/A
Default Value
N/A
Related Parameters
UUtranCellFDD.eutraFreqNum
UUtranCellFDD.frePrio4EHoRedi[]
2-3118
SJ-20141209142030-013|2015-11-12 (R1.3)
UUtranCellFDD.dlEARFCN[] is a multi-dimensional array with the
Parameters
dimension UUtranCellFDD.eutraFreqNum.
There is a one-to-one correspondence between UUtranCellFDD.dlEARFCN[] and UUtranCellFDD.frePrio4EHoRedi[].
Data Type
WORD
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: The parameter indicates the downlink
E-UTRAN Absolute Radio Frequency Channel Number.

Related factor: network planning.
The parameter is a multiple array, the array dimension is the number
of neighbor EUTRAN centre frequencies, which is indicated by
UUtranCellFDD.eutraFreqNum. dlEARFCN and frePrio4EHoRedi
are used in pairs, and there is a one-to-one correspondence between
each frequency in dlEARFCN and its priority in frePrio4EHoRedi.
If the frequencies of EUTRAN neighbor cells change, the information
of frequency and its priority in UUtranCellFDD MO is manually
added or deleted by network planning and optimization engineers.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.196 Frequency Priority for E-UTRAN Inter-RAT Handover or

Redirection
Full Name
Frequency Priority for E-UTRAN Inter-RAT Handover or Redirection
2-3119
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
frePrio4EHoRedi
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency priority of neighboring cells

during an E-UTRAN inter-RAT handover or redirection. The lowest
priority is 0 and the highest priority is 2. This parameter and the
dlEARFCN parameter are used in pairs, and there is a one-to-one
correspondence between each frequency in dlEARFCN and the
priority in frePrio4EHoRedi.
DBS_FP_MAX_NUM_EUTRAN_FREQ is the maximum number of
neighbor EUTRAN centre frequencies, with the value of 16.
Instance
UTRAN Cell
ZWF21-03-111
Fast Return to LTE
(0..2)
Unit
N/A
Default Value
N/A
Related Parameters
UUtranCellFDD.dlEARFCN[]
There is a one-to-one correspondence between UUtran-
Parameters
CellFDD.dlEARFCN[] and UUtranCellFDD.frePrio4EHoRedi[].
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the frequency priority
of neighbor cells in E-UTRAN inter-RAT handover or redirection.

Related factor: E-UTRAN network planning.
If this parameter is set to a smaller value, the priority is lower. If this
parameter is set to a larger value, the priority is higher.
If a UE is expected to perform handover or redirect to a frequency,
the priority of the frequency can be set higher.
This parameter and dlEARFCN are used in pairs, and there is a
one-to-one correspondence between each frequency in dlEARFCN
and its priority in this parameter.
2-3120
SJ-20141209142030-013|2015-11-12 (R1.3)
If the frequencies of EUTRAN neighbor cells change, the information

of frequency and its priority in UUtranCellFDD MO is manually
added or deleted by network planning and optimization engineers.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.197 Number of EUTRAN Centre Frequencies

Full Name
Number of EUTRAN Centre Frequencies
Abbreviated Name
eutraFreqNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of neighboring EUTRAN

centre frequencies. The number of frequencies and their priorities
are configured based on this parameter.
Instance
UTRAN Cell
ZWF21-03-111
Fast Return to LTE
0..16
Unit
NA
Default Value
2-3121
SJ-20141209142030-013|2015-11-12 (R1.3)
Related Parameters
UUtranCellFDD.dlEARFCN[]
UUtranCellFDD.dlEARFCN[] is a multi-dimensional array with the
Parameters
dimension UUtranCellFDD.eutraFreqNum.
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
neighbor EUTRAN centre frequencies.

Related factor: The value of this parameter is determined by the
operator's EUTRA frequency resources and EUTRA network
configurations.
If this parameter is set to a larger value, the number of EUTRA
centre frequencies is more. If this parameter is set to a smaller
value, the number of EUTRA centre frequencies is less.
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.198 Small Cell Interference Detection Switch

Full Name
Small Cell Interference Detection Switch
Abbreviated Name
interferDetecSwi
Managed Object
3GPP Name
N/A
2-3122
SJ-20141209142030-013|2015-11-12 (R1.3)
3GPP Reference
N/A
Description
This parameter enables or disables small cell interference detection.

If this parameter is set to "1: On", uplink interference and downlink
pilot pollution can be detected.
Instance
UTRAN Cell
N/A
N/A
0: Off
1: On
Unit
NA
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: This parameter sets the switch of small cell
interference detection.
Related factors: network optimization requirements.
If the switch is enabled, the pilot pollution and uplink interference
information can be acquired for network optimization.
The default value is set based on network optimization requirements.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2-3123
SJ-20141209142030-013|2015-11-12 (R1.3)
2.112.199 Preferred Carrier Indicator for Preferred Camping in

Multi-carriers Network
Full Name
Preferred Carrier Indicator for Preferred Camping in Multi-carriers

Network
Abbreviated Name
prefCarrierInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the current cell is a cell of

preferred carriers in a multi-carrier network. If this parameter is set
to "1: Yes", the current cell is a cell of preferred carriers, which
means the camping strategy of UEs in a multi-carriers network is
preferred camping. If this parameter is set to "0: No", the current
cell is a cell of non-preferred carriers.
Instance
UTRAN Cell
ZWF21-01-011
0: No
1: Yes
Unit
NA
Default Value
0: No
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates whether the current
cell is a cell of the preferred carrier in a multi-carrier network.

Related factor: network deployment.
In a multi-carrier network, if a cell is planned to be a cell of the
preferred carrier, the parameter is set to "1: Yes"; otherwise, the
parameter is set to "0: No".
2-3124
SJ-20141209142030-013|2015-11-12 (R1.3)
The default value is set by network planning and optimization
Reason
engineers as required.
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.200 Multi-Carrier Power Optimization Function Switch

Full Name
Multi-Carrier Power Optimization Function Switch
Abbreviated Name
mCPwrOptInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a cell supports the multi-carrier

power optimization function or not. 0: Multi-carrier power
optimization is not supported.
1: Multi-carrier power optimization is supported.
Instance
UTRAN Cell
ZWF21-04-041
Multi Carrier Power Optimization
ZTE UMTS Multi-Carrier Power Optimization Feature Guide
0: Not Supported
1: Supported
Unit
NA
Default Value
0Not Supported
Related Parameters
N/A
2-3125
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
BYTE
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Related factors: Multi-carrier network planning and multi-carrier
PRACH capacity in the cell coverage area.

Adjustment suggestion: In a multi-carrier coverage area, if the
carriers for user camping and the carriers for services are planned
separately, and if the PRACH capacity of the carriers for user
camping is sufficient, this function can be enabled for the carriers
carrying services to increase the carrier capacity.
To guarantee the continuous coverage of the carriers for user
camping, the parameter is set according to the following rules:
- When UCelInfoFDD.freCloseAllowedInd of a cell is set to "0: Not
Allowed", UUtranCellFDD.mCPwrOptInd of the same cell cannot
be set to "1: Supported";
- When this function is enabled for a cell, not all UUtranCellFDD.mCPwrOptInd of the inter-frequency cells with the same
coverage can be set to "1: Supported".
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.112.201 Used SPID and priority relation Profile

Full Name
Used SPID and priority relation Profile

2-3126
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
refUSPIDPriGProfile
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the profile ID of an SPID and priority. A

profile corresponds to a relation configuration between SPIDs and
priority group IDs. Each cell obtains the used SPID and priority
group ID based on the profile ID.
Instance
UTRAN Cell
ZWF27-02-002

N/A
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
STRING
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter sets an SPID and the priority
profile object name.

Related factor: uniqueness under the parent object.
Reason
Change Take Effect
No
How to Impact
N/A
Access
read/write
2-3127
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
Add
2.112.202 Switch for RRC Establishment Cause Differentiation in

Basic Priority Setting
Full Name
Switch for RRC Establishment Cause Differentiation in Basic Priority

Setting
Abbreviated Name
rrcCauseDiffSwtch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables priority setting for RRC signaling

establishment based on establishment causes.
If this parameter is set to "1: On", the basic priority of RRC
connection with different establishment causes can be set to
different values.
Instance
UTRAN Cell
ZWF21-05-003
QoS Guarantee FG
0: Off
1: On
Unit
N/A
Default Value
0: Off
Related Parameters
N/A
N/A
Parameters
Data Type
BYTE
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
2-3128
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter enables or disables priority
setting for RRC signaling establishment based on establishment

causes.
If this parameter is set to "0: Off", the basic priority of RRC
connection with different establishment causes cannot be set to
different values. If this parameter is set to "1: On", the basic priority
of RRC connection with different establishment causes can be set
to different values.
Related factor: network deployment requirements of the operator
Adjustment suggestion: This parameter is set based on the
operator's requirements.
The default value is set because the function is not used in most
Reason
networks.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
read/write
OMC Access path
Add
2.113 Extended Info of UTRAN Cell(UCelInfoFDD)

2.113.1 Cell Extended Info Configuration Object ID
Full Name
Cell Extended Info Configuration Object ID
Abbreviated Name
UCelInfoFDDId
Managed Object
Extended Info of UTRAN Cell(UCelInfoFDD)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the object ID of the extended cell

configuration.
2-3129
SJ-20141209142030-013|2015-11-12 (R1.3)
Instance
RNC
N/A
N/A
N/A
0..2147483647
Unit
N/A
Default Value
N/A
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
N/A
Reason
Change Take Effect
No
How to Impact
N/A
Access
Restricted
OMC Access path
GUI: Managed Element->UMTS Logical Function Configuration>UTRAN Cell->Extended Info of UTRAN Cell
N/A
N/A
2.113.2 Start Time to Switch Off Frequency Intelligently

Full Name
Start Time to Switch Off Frequency Intelligently
Abbreviated Name
startTimetoClsF
Managed Object

2-3130
SJ-20141209142030-013|2015-11-12 (R1.3)

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a tuple (TIME_STRUCT_LENGTH_OF_CLOSE_FREQ=3), whose elements are hour, minute, and second.
It indicates the start time for closing the carrier. When the time
reaches this value, the RNC starts to determine whether the carrier
closing conditions are satisfied. If yes, the carrier will be closed.
This start time is usually defined to be within the evening because
there are a relatively small number of active UEs in the evening.
Instance
UTRAN Cell
ZWF21-20-017
hour StartTimetoClsF[0] (0..23), step 1

min StartTimetoClsF[1] (0..59), step 1
sec StartTimetoClsF[2] (0..59), step 1
Unit
hour: min: sec
Default Value
[22 0 0] (The time is 22: 00: 00)
Related Parameters
endTimetoClsF
The value of startTimetoClsF and endTimetoClsF is different.
Parameters
Data Type
long[DBS_RR_TIME_STRUCT_LENGTH_OF_CLOSE_FREQ]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the start time for
terminating the intelligent carrier closing function.

Related factors: network planning and optimization parameters.
This parameter can be configured according to the actual conditions.
A carrier can be closed usually when the traffic of a cell is relatively
low.
This parameter is invalid when the switch CloseFreFunSwit is
turned off.
When a carrier cannot be closed (FreCloseAllowedInd = 0), it is
required that the start time and the end time for terminating the
carrier closing function shall be its intersection of those cells that can
be closed within the same coverage (FreCloseAllowedInd = 1). The
purpose is that the close carrier wave can be woken up within this
2-3131
SJ-20141209142030-013|2015-11-12 (R1.3)
period of time if the load of the carrier is high. If there is no special

requirements, to simplify the configuration, it is recommended to set
the start time (StartTimetoClsF) and the end time (EndTimetoClsF)
to the same value for all cells in the same coverage.
In normal cases, the traffic of a cell is relatively low between 10: 00
Reason
pm and 7: 00 am.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.3 End Time to Switch Off Frequency Intelligently

Full Name
End Time to Switch Off Frequency Intelligently
Abbreviated Name
endTimetoClsF
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is a tuple (TIME_STRUCT_LENGTH_OF_CLOSE_FREQ=3), whose elements are hour, minute, and second. It
indicates the end time for closing the carrier. When the time reaches
this value, the RNC does not determine whether to close the carrier.
This end time is usually defined to be within the morning because
there are a relatively small number of active UEs in the evening
whereas there are a relatively great number of active UEs in the
morning.
Instance
UTRAN Cell
ZWF21-20-017

2-3132
SJ-20141209142030-013|2015-11-12 (R1.3)
hour EndTimetoClsF[0] (0..23), step 1

min EndTimetoClsF[1] (0..59), step 1
sec EndTimetoClsF[2] (0..59), step 1
Unit
hour: min: sec
Default Value
[7 0 0] (The time is 7: 00: 00)
Related Parameters
startTimetoClsF
The value of startTimetoClsF and endTimetoClsF is different.
Parameters
Data Type
long[DBS_RR_TIME_STRUCT_LENGTH_OF_CLOSE_FREQ]
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the end time for
terminating the intelligent carrier closing function.

Related factors: network planning and optimization parameters.
This parameter must be configured according to the actual
conditions. A carrier can be closed usually when the traffic of a
cell is relatively low.
This parameter is invalid when the switch CloseFreFunSwit is
turned off.
When carrier 1 (FreCloseAllowedInd = 0) cannot be closed, the
duration(from start time and to end time ) of carrier 1 is required to be
longer than or equal to the duration of carrier 2 (FreCloseAllowedInd
= 1) that can be closed and covers the same area with carrier 1. The
purpose is that a closed carrier can be woken up within the period
of time if the load of the carrier 1 is high. If there are no special
requirements, to simplify the configuration, it is recommended
that all cells covering the area are set with the same start time
(StartTimetoClsF) and the same end time (EndTimetoClsF).
In normal cases, the traffic of a cell is relatively low between 10: 00
Reason
pm and 7: 00 am.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
2-3133
SJ-20141209142030-013|2015-11-12 (R1.3)
OMC Access path
N/A
N/A
2.113.4 UE Number Threshold Used for Switching Off Frequency

Intelligently
Full Name
UE Number Threshold Used for Switching Off Frequency Intelligently
Abbreviated Name
ueNumThreshCls
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the threshold of the number of UEs for

triggering the intelligent carrier closing function in the multi-carrier
network. If the number of UEs in a cell is smaller than this threshold,
it determines whether to close this cell.
Instance
UTRAN Cell
ZWF21-20-017
(0..100), step 1
Unit
N/A
Default Value
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3134
SJ-20141209142030-013|2015-11-12 (R1.3)
number of UEs for triggering the intelligent carrier closing function in

the multi-carrier network.
Related factors: power saving and service quality.
If the parameter value is too small, it is difficult to meet the carrier
closing requirement, thus affecting power saving.
If the parameter value is too large, it is easy to meet the carrier
closing requirement, which obviously increases the cell load of other
carriers covering the same area and thereby affects service quality.
The default value of this parameter is set based on power saving
Reason
and service quality.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.5 Trigger Time of judgment Switching On/Off Frequency

Intelligently
Full Name
Trigger Time of judgment Switching On/Off Frequency Intelligently
Abbreviated Name
freClsOpnTrigTm
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to enable or disable a cell if the

load is eligible during the triggering time (FreClsOpnTrigTm) when
the intelligent carrier closing/starting is to be determined.
Instance
UTRAN Cell
ZWF21-20-017
2-3135
SJ-20141209142030-013|2015-11-12 (R1.3)
(1..65535)s, step 1s
Unit
Default Value
300s
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
This parameter is used to avoid starting/closing a carrier because
of an occasional load change.

If the parameter value is too large, it is uneasy to trigger the
starting/closing of a carrier.
If the parameter value is too small, a carrier may be mistakenly
started/closed because of an occasional load change.
The default value can avoid carrier shutdown because of occasional
Reason
load reduction and meet the energy saving requirement.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.6 Switch of Algorithm Used to Switch On the Frequency

Intelligently
Full Name
Switch of Algorithm Used to Switch On the Frequency Intelligently

2-3136
SJ-20141209142030-013|2015-11-12 (R1.3)
Abbreviated Name
openFreAlg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the algorithm used for starting a carrier.

0: starting a carrier based on the time.
1: starting a carrier based on whether the operating carrier cell is
congested.
2: starting a carrier based on the time or whether the operating
carrier cell is congested.
3: starting a carrier based on the time or the load of the operating
carrier cell.
Instance
UTRAN Cell
ZWF21-20-017
0: Based on the Time to Switch On Frequency

1: Based on Whether the Working Cell is Congested to Switch On
Frequency
2: Based on Time or Whether the Working Cell is Congested to
Switch On Frequency
3: Based on Time or Cell Load to Switch On Frequency
Unit
N/A
Default Value
2: Based on Time or Whether the Working Cell is Congested to

Switch On Frequency
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3137
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the algorithm used
for starting a carrier.

Related factors: network planning and network optimization
parameters configured in accordance with the actual requirements.
0: A carrier is started at the scheduled time.
1: starting a carrier based on whether the working cell is congested.
2: starting a carrier based on the time or whether the working cell
is overloaded.
3: starting a carrier based on the time or the cell load (whether the
load of a resource exceeds the threshold).
2: starting a carrier based on the time or the cell load.
Reason
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.7 Switch of Algorithm Used to Switch Off the Frequency

Intelligently
Full Name
Switch of Algorithm Used to Switch Off the Frequency Intelligently
Abbreviated Name
closeFreAlg
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-3138
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates the algorithm for shutting down the carrier.
0: shuts down the carrier in accordance with the number of users in
CELL_DCH status, 1: shuts down the carrier in accordance with the
load evaluation result. For the area with very low traffic in a period of
time (for example, the off-duty hours in office parks), the carrier can
be shut down by using algorithm 1. For the area with a large number
of low-tariff users, the carrier can be shut down by using algorithm 2.
Instance
UTRAN Cell
ZWF21-20-017
0: Based on the User Number on CELL_DCH State to Switch Off

Frequency
1: Based on the Cell Load to Switch Off Frequency
Unit
N/A
Default Value
0: Based on the User Number on CELL_DCH State to Switch Off

Frequency
Related Parameters
CloseFreFunSwit
OpenFreAlg is valid only when CloseFreFunSwit is 1.
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: This parameter selects the algorithm used for
shutting down the carrier intelligently.

Related factor: shutting down the carrier in accordance with the
number of users or the load evaluation result. If whether to shut
down the carrier depends on the number of users, the carrier is shut
down when the number of online users is less than a threshold. If
whether to shut down the carrier depends on the cell load, the carrier
is shut down when the cell load is not greater than a threshold.
It is easier to shut down the carrier based on the number of users.
Reason
Change Take Effect
No
2-3139
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.8 Forbidden Time of Switching Off After Switching On the

Frequency
Full Name
Forbidden Time of Switching Off After Switching On the Frequency
Abbreviated Name
forbTimAftOpnF
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the time interval allowed for closing the
carrier again after it is started. If a carrier is started, the carrier
cannot be closed again until the timer expires. This helps avoid
frequent starting and closing of the carrier.
Instance
UTRAN Cell
ZWF21-20-017
Unit
hours
Default Value
0.5hour
Related Parameters
N/A
N/A
Parameters
Data Type
double
Parameter Type
Negotiation With CN
No
Function Switch
No
2-3140
SJ-20141209142030-013|2015-11-12 (R1.3)
Parameter function: This parameter indicates the time interval
allowed for closing the carrier again after it is started.

Related factors: avoiding frequent starting and closing of a carrier
as well as power saving.
If the parameter value is too small, it may cause frequent starting
and closing of a carrier.
If the parameter value is too large, it cannot save power because a
carrier cannot be closed after being started for a long time.
The default value of this parameter can avoid frequent starting and
Reason
closing of a carrier as well as power saving.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.9 Maximum Bit Rate on DL DCH for RT PS RAB in Serving Cell

Full Name
Maximum Bit Rate on DL DCH for RT PS RAB in Serving Cell
Abbreviated Name
rtMaxDlRateDch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate of a real-time PS

domain RAB in the serving cell that can be allowed on the DL DCH.
Instance
UTRAN Cell
ZWF21-04-004
2-3141
SJ-20141209142030-013|2015-11-12 (R1.3)
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate on the downlink DCH
for real-time PS RAB in the serving cell.

Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3142
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.10 Maximum Bit Rate on UL DCH for RT PS RAB in Serving

Cell
Full Name
Maximum Bit Rate on UL DCH for RT PS RAB in Serving Cell
Abbreviated Name
rtMaxUlRateDch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

domain RAB in the serving cell that can be allowed on the UL DCH.
Instance
UTRAN Cell
ZWF21-04-004
(8, 16, 32, 64, 128, 144, 256, 384) kbps
Unit
kbps
Default Value
384 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate on the uplink DCH
for real-time PS RAB in the serving cell.

2-3143
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.11 Maximum Bit Rate on E-DCH for NRT PS RAB in Serving

Cell
Full Name
Maximum Bit Rate on E-DCH for NRT PS RAB in Serving Cell
Abbreviated Name
nrtMaxRateEdch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description

domain RAB in the serving cell that can be allowed on the E-DCH.
Instance
UTRAN Cell
ZWF25-01-A
(8, 16, 32, 64, 128, 144, 256, 384, 512, 711, 1024, 1399, 1448,
2048, 2886, 3072, 4096, 5760, 11520) kbps
Unit
kbps
2-3144
SJ-20141209142030-013|2015-11-12 (R1.3)
Default Value
5760 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate on the E-DCH for
non-real-time PS RAB in the serving cell.

Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.12 Maximum Bit Rate on E-DCH for RT PS RAB in Serving Cell

2-3145
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
Maximum Bit Rate on E-DCH for RT PS RAB in Serving Cell
Abbreviated Name
rtMaxRateEdch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the maximum bit rate of a real-time PS

domain RAB in the serving cell that can be allowed on the E-DCH.
Instance
UTRAN Cell
ZWF25-01-A
ZWF26-03-004
ZWF26-03-004

DC-HSUPA
DC-HSUPA FG
(8, 16, 32, 64, 128, 144, 256, 384, 512, 711, 1024, 1399, 1448,
2048, 2886, 3072, 4096, 5760, 11520) kbps
Unit
kbps
Default Value
5760 kbps
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: sets the maximum bit rate on the E-DCH for
real-time PS RAB in the serving cell.

2-3146
SJ-20141209142030-013|2015-11-12 (R1.3)

Reason
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.13 DL Controlled MBR Switch

Full Name
DL Controlled MBR Switch
Abbreviated Name
dlCtrlMBRSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to control the MBR value in the downlink

controllable MBR detection function at RNC side.
If the value of DlCtrlMBRSwitch is "0: Off", the service MBR = MBR
assigned by CN
If the value of DlCtrlMBRSwitch is "1: Replaced Mode", the service
MBR = UlControledMBR.
If the value of UlCtrlMBRSwitch is "2: Minimum Mode", the service
MBR = min{MBR assigned by CN, UlControledMBR };
If the value of UlCtrlMBRSwitch is "3: Maximum Mode", the service
MBR = max{ MBR assigned by CN, UlControledMBR }.
Instance
Utran Cell
ZWF21-05-002
2-3147
SJ-20141209142030-013|2015-11-12 (R1.3)
QOS Guarantee FG
0 Off
1 Replaced Mode
2 Minimum Mode
3 Maximum Mode
Unit
N/A
Default Value
0 Off
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the DL Controlled MBR switch.
Configuration rule:
If the switch is on, the MBR specified by the CN can be modified.
This is mainly used in some test scenes.
If the switch is off, the MBR specified by the CN cannot be modified.
The default value is set to off because this function is only used
Reason
in the test scenario.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.14 DL Controlled MBR

2-3148
SJ-20141209142030-013|2015-11-12 (R1.3)
Full Name
DL Controlled MBR
Abbreviated Name
dlControledMBR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the MBR value in the downlink controllable

MBR detection function at RNC side.
Instance
Utran Cell
ZWF21-05-002
QOS Guarantee FG
(8, 16, 32, 64, 128, 144, 256, 384, 512, 768, 900, 1024, 1200, 1800,
2048, 3650, 4096, 6144, 7200, 8192, 8640, 10100, 14000, 17600,
21096, 23370, 27952, 35280, 42192) kbps
Unit
kbps
Default Value
21096
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the MBR value in the DL Controlled
MBR function on the RNC side.

If this parameter is configured to a greater value, the modified MBR
value is greater.
If this parameter is configured to a smaller value, the modified MBR
value is smaller.
The default value is set in accordance with the maximum rate that
Reason
can be reached by the users that use 16QAM modulation mode.
Change Take Effect
Ongoing Connection
No
2-3149
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.15 UL Controlled MBR Switch

Full Name
UL Controlled MBR Switch
Abbreviated Name
ulCtrlMBRSwitch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is used to control the MBR value in the uplink

controllable MBR detection function at RNC side.
If the value of UlCtrlMBRSwitch is "0: Off", the service MBR = MBR
assigned by CN
If the value of UlCtrlMBRSwitch is "1: Replaced Mode", the service
MBR = UlControledMBR.
If the value of UlCtrlMBRSwitch is "2: Minimum Mode", the service
MBR = min{MBR assigned by CN, UlControledMBR };
If the value of UlCtrlMBRSwitch is "3: Maximum Mode", the service
MBR = max{ MBR assigned by CN, UlControledMBR }.
Instance
Utran Cell
ZWF21-05-002
QOS Guarantee FG
0 Off
1 Replaced Mode
2 Minimum Mode
3 Maximum Mode
Unit
N/A
Default Value
0 Off
Related Parameters
N/A
2-3150
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: sets the UL Controlled MBR switch.
Configuration rule:
If the switch is on, the MBR specified by the CN can be modified.
This is mainly used in some test scenes.
If the switch is off, the MBR specified by the CN cannot be modified.
The default value is set to off because this function is only used
Reason
in the test scenario.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.16 UL Controlled MBR

Full Name
UL Controlled MBR
Abbreviated Name
ulControledMBR
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the MBR value in the uplink controllable

MBR detection function at RNC side.
Instance
Utran Cell
2-3151
SJ-20141209142030-013|2015-11-12 (R1.3)
ZWF21-05-002
QOS Guarantee FG
8, 16, 32, 64, 128, 144, 256, 384, 512, 711, 1024, 1399, 1448, 2048,
2886, 3072, 4096, 5760, 11520) kbps
Unit
kbps
Default Value
5760
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: indicates the MBR value in the UL Controlled
MBR function on the RNC side.

If this parameter is configured to a greater value, the modified MBR
value is greater.
If this parameter is configured to a smaller value, the modified MBR
value is smaller.
The default value is set in accordance with the maximum rate that
Reason
can be reached by the users that do not use 16QAM modulation

mode.
Change Take Effect
Ongoing Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3152
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.17 Switch of Cell Restriction

Full Name
Switch of Cell Restriction
Abbreviated Name
cellBarAcSwh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the switch of the Cell Restriction. If

this parameter is "Switch Off Cell Restriction by OMCR", the
cell switches off the cell restriction function. If this parameter is
"Switch On Cell Restriction by OMCR", the cell switches on the cell
restriction function. If this parameter is "RNC Controls Dynamically
Cell Restriction", the cell dynamically opens or closes the cell
restriction according to the load of uplink.
Instance
UTRAN Cell
ZWF21-03-005
0: Switch Off Cell Restriction by OMCR

1: Switch On Cell Restriction by OMCR
2: RNC Controls Dynamically Cell Restriction
Unit
N/A
Default Value
0: Switch Off Cell Restriction by OMCR
Related Parameters
CellBarPollingSwh
CellBarPollingSwh is valid only when CellBarAcSwh of R6CelInfo is
Parameters
not "0"
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
2-3153
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the switch of the Cell Restriction.
If this parameter is "Switch Off Cell Restriction by OMCR", the cell

restriction function is switched off. If this parameter is "Switch On
Cell Restriction by OMCR", the cell restriction function is switched
on. If this parameter is "RNC Controls Dynamically Cell Restriction",
the cell dynamically switches on or off the cell restriction according
to the load of uplink.
Configuration Rule:
The parameter should be set to 0 if it is not necessary to bar the
cell. And it should be set to 1 if the operator needs to bar the cell
manually. If it is set to 2, the cell will be barred according the uplink
cell load.
The default value turns off the cell bar function. If the cell bar
Reason
function is required to start, 1 or 2 should be selected according to

configuration rule.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.18 Switch of Polling in Cell Restriction

Full Name
Switch of Polling in Cell Restriction
Abbreviated Name
cellBarPollingSwh
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-3154
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates whether the cell uses the polling mode
for AC restriction when cell restriction (the value of CellBarAcSwh
is 1 or 2) is used. The cell restriction information is indicated in the
Access Class Barred list in the SIB3 message.
If this parameter is set to "Polling", the cell periodically triggers AC
restrictions, and the SIB3 message is updated according to "Time
Interval of Barred AC".
If this parameter is set to "Not Polling", the cell triggers the restriction
process based on the AC restricted in the OMCR (ACBarredOmcr).
Instance
UTRAN Cell
ZWF21-03-005
0: Not Polling
1: Polling
Unit
N/A
Default Value
0: Not Polling
Related Parameters
CellBarAcSwh
Valid only when CellBarAcSwh of R6CelInfo is not "0"
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: it indicates whether the cell access restriction
uses the polling mode.

Related factors: AC restriction policy
Configuration rule:
Set this parameter to "Not Polling" when it is necessary to restrict
the access of the specified AC(s) to the cell.
Set this parameter to "Polling" when it is necessary to periodically
restrict the access of different ACs to the cell. In this case, the SIB3
messages are updated frequently, which may cause a heavier load.
If the carrier purchases the DSAR function, this parameter can be
Reason
set to "1". Otherwise, this parameter should be set to "0".
Change Take Effect
Next DSAR procedure
No
2-3155
SJ-20141209142030-013|2015-11-12 (R1.3)
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.19 Number of Cell Barred AC

Full Name
Number of Cell Barred AC
Abbreviated Name
cellBarAcNum
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the number of Barred AC (Access Class)

in one polling period when cell restriction operates in the method
of "Polling".
Instance
UTRAN Cell
ZWF21-03-005
1..10
Unit
N/A
Default Value
Related Parameters
CellBarPollingSwh
Valid only when CellBarPollingSwh is set to "Polling"
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
2-3156
SJ-20141209142030-013|2015-11-12 (R1.3)
Function: This parameter indicates the number of Barred AC
(Access Class) in one polling period when cell restriction operates in

the method of "Polling".
Configuration Rule:
The larger the value is, the more ACs are barred for each period
when the DSAR is started.
In order not to affect the user experience too obviously, the value
Reason
of 2 is set to the default value.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.20 Time Interval of Barred AC

Full Name
Time Interval of Barred AC
Abbreviated Name
barInterval
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the polling period when CSDsarPollingSwh

or PSDsarPollingSwh is set to "Polling" if the corresponding
CS or PS domain enables DSAR, or the polling period when
CellBarPollingSwh is set to "Polling" if the cell restriction (the value
of CellBarAcSwh is non-0) is used. In this period, related ACs are
restricted.
Instance
UTRAN Cell
ZWF21-01-018
ZWF21-03-005
2-3157
SJ-20141209142030-013|2015-11-12 (R1.3)


(6..65532)s, step 6s
Unit
Default Value
60
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
N/A
Parameter function: it indicates the polling period (unit: second)
when the CS/PS Domain Specific Access Restriction (DSAR) or the

cell access restriction uses the polling mode.
Configuration rule:
The greater the parameter is, the longer the AC users are restricted
each time. The longer these users are restricted, the less frequently
the SIB3 messages are updated.
The smaller the parameter is, the shorter the AC users are restricted
each time. Therefore, the SIB3 messages are updated more
frequently, causing a heavier load.
The DSAR function will periodically update system information for
Reason
all cells. Therefore, this parameter is set to 60 seconds to reduce

the RNC burden.
Change Take Effect
Next DSAR procedure
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3158
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.21 Service Handover Switch

Full Name
Service Handover Switch
Abbreviated Name
servHoSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a service handover is allowed

or not. If the "service handover" is included in RAB assignment
request, and the switch is "On", the RNC will process the field based
on the value of "service handover", otherwise the RNC will ignore
the field.
Instance
UTRAN Cell
ZWF21-05-022
Service-Based Handover
Service-Based Handover FG
0: Off
1: On
Unit
N/A
Default Value
On
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
Yes
Function Switch
Yes
Parameter function: service handover indicator
Effect:
If the parameter is set to "On", services can be distributed in UMTS
or GSM systems via the service handover policy. For example, AMR
is in GSM, and PS data service is in UMTS.
If the parameter is set to "Off", the service handover policy is not
performed.
Reason
requirements.
2-3159
SJ-20141209142030-013|2015-11-12 (R1.3)
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.22 Absolute Priority Reselection Criteria Switch

Full Name
Absolute Priority Reselection Criteria Switch
Abbreviated Name
absPriReselSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the absolute priority reselection

rule is used. If AbsPriReselSwch is set to "On", the RNC will
broadcast SIB19 messages. Otherwise, SIB19 messages will not
be broadcast.
Instance
UTRAN Cell
ZWF21-03-005
0: Off
1: On
Unit
N/A
Default Value
Off
Related Parameters
N/A
N/A
Parameters
2-3160
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
Yes
Parameter function: absolute priority reselection switch
Related factors: UTRAN and EUTRAN coexistence scenario

If the parameter is set to 0, cell reselection based on absolute
priority is not used.
If the parameter is set to 1, cell reselection based on absolute
priority is used. In the scenario where cells are reselected from
UMTS to LTE, this parameter must be set to 1.
The default parameter value is set based on the scenario where
Reason
UTRAN and EUTRAN coexist.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.23 Inter Frequency or Inter RAT handover Switch

Full Name
Inter Frequency or Inter RAT handover Switch
Abbreviated Name
ifOrRatHoSwch
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
2-3161
SJ-20141209142030-013|2015-11-12 (R1.3)
Description
This parameter indicates how to perform neighbor measurement if

both the inter-frequency and inter-RAT neighboring cells exist.
For inter-RAT, when GSM neighbor cells and EUTRAN neighbor
cells are both exist, only the measurement of the higher priority
system is issued. When the value is not 4, the priority of GSM and
EUTRAN is indicated by ChoStraMulRatHo. When the value is 4,
EUTRAN is prior to GSM by default.
Instance
UTRAN Cell
ZWF21-03-003
ZWF21-03-004
ZWF21-03-110

Inter-RAT Mobility
Handover with LTE
Handover Control FG
0: Turn off Inter-frequency and Inter-RAT Handover

1: Only Inter Frequency
2: Only Inter RAT
3: Inter Frequency Is Prior to Inter RAT
4: EUTRAN Firstly, Inter-frequency Secondly, GSM Finally
Unit
N/A
Default Value
4: EUTRAN Firstly, Inter-frequency Secondly, GSM Finally
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: priority of inter-frequency and inter-RAT
handover
Related factors: network planning
If only inter-frequency handover is expected, this parameter is set
to 1.
If only inter-RAT handover is expected, this parameter is set to 2.
If inter-frequency handover is preferably expected, this parameter
is set to 3.
If EUTRAN inter-RAT handover is preferably expected, this
parameter is set to 4.
2-3162
SJ-20141209142030-013|2015-11-12 (R1.3)
The default parameter value is set based on the multi-carrier/system
Reason
network planning.
Change Take Effect
No
How to Impact
N/A
Access
Read/Write
OMC Access path
V4.13.10.15/V3.13.10.15
ADD
2.113.24 Transport Band Width for Downlink Enhanced

CELL_FACH, CELL_PCH and URA_PCH
Full Name
Transport Band Width for Downlink Enhanced CELL_FACH,

CELL_PCH and URA_PCH
Abbreviated Name
eFachPchBandWidth
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the transport bandwidth allocated for the

Downlink Enhanced CELL_FACH, CELL_PCH and URA_PCH,
which can not be used by other channels.
Instance
UTRAN Cell
ZWF26-01-011
Unit
kbps
Default Value
64
Related Parameters
N/A
2-3163
SJ-20141209142030-013|2015-11-12 (R1.3)
N/A
Parameters
Data Type
long
Parameter Type
Fixed
Negotiation With CN
No
Function Switch
No
Parameter function: This parameter indicates the transport
bandwidth allocated for Downlink Enhanced CELL_FACH,

CELL_PCH, and URA_PCH.
Related factor: transport bandwidth requirement of Downlink
Enhanced CELL_FACH, CELL_PCH, and URA_PCH.
Effect: The larger the parameter is, the higher the bandwidth that
can be used by Downlink Enhanced CELL_FACH, CELL_PCH,
and URA_PCH is, and the larger the service throughput is. The
smaller the parameter is, the smaller the transport bandwidth that
can be used by Downlink Enhanced CELL_FACH, CELL_PCH,
and URA_PCH is, and the smaller the service throughput is, but
the larger the transport bandwidth used by the services carried on
other channels.
Adjustment suggestion: The value of this parameter should match
the network service model. It can be set to 32 kbps for the cell with
limited transport bandwidth and is suggested to use the default
value if there is no special requirement.
The default value is set based on the transport bandwidth
Reason
requirement of downlink enhanced FACH/PCH.
Change Take Effect
New Connection
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2-3164
SJ-20141209142030-013|2015-11-12 (R1.3)
2.113.25 E-FACH DRX Support Indication in Cell

Full Name
E-FACH DRX Support Indication in Cell
Abbreviated Name
drxOnFachInd
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the cell supports the E-FACH

DRX switch.
Instance
UTRAN Cell
ZWF26-02-006
Enhanced UE DRX
Enhanced UE DRX FG
0: Not Supported
1: Supported
Unit
N/A
Default Value
0: Not Supported
Related Parameters
N/A
N/A
Parameters
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
Yes
Parameter function: indicates whether the cell support E-FACH
DRX.
Configuration rule:
If the switch is on, it can save the power consumption of the UE in
E-FACH state. However, the user experience will be affected due to
discontinuous reception.
If the switch is off, it cannot save the power consumption of the
UE in E-FACH state.
Reason
Change Take Effect
2-3165
SJ-20141209142030-013|2015-11-12 (R1.3)
No
How to Impact
N/A
Access
Read/Write
OMC Access path
N/A
N/A
2.113.26 Choice Strategy in Multi-RAT Handover

Full Name
Choice Strategy in Multi-RAT Handover
Abbreviated Name
choStraMulRatHo
Managed Object

3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the policy for selecting a system for

handovers when multimode inter-RAT neighboring cells exist at the
same time.
Instance
UTRAN Cell
ZWF21-03-004
ZWF21-03-110
Inter-RAT Mobility
Handover with LTE
0: GSM/GERAN prefer
1: EUTRAN FDD prefer
Unit
N/A
Default Value
0: GSM/GERAN prefer
Related Parameters
N/A
N/A
Parameters
2-3166
SJ-20141209142030-013|2015-11-12 (R1.3)
Data Type
long
Parameter Type
Negotiation With CN
No
Function Switch
No
Parameter function: priority of policies for inter-RAT handover

This parameter indicates the policy for selecting a system for
handovers when multimode inter-RAT neighboring cells exist at the
same time
Reason
planning.
Change Take Effect
Service or Node Imp

SJ-20141209142030-013-ZXUR 9000 UMTS (V4.14.10.14) Radio Parameter Reference PDF

Transféré par

Informations du document

Titre original

Copyright

Formats disponibles

Partager ce document

Partager ou intégrer le document

Options de partage

Avez-vous trouvé ce document utile ?

Ce contenu est-il inapproprié ?

Droits d'auteur :

Formats disponibles

SJ-20141209142030-013-ZXUR 9000 UMTS (V4.14.10.14) Radio Parameter Reference PDF

Transféré par

Droits d'auteur :

Formats disponibles

ZXUR 9000 UMTS

Radio Network Controller

Radio Parameter Reference

Additionally, the contents of this document are protected by

contractual confidentiality obligations.

Modified the Value Range and Step of the following parameters:

3.76.11 Time to Trigger

3.77.11 Time to Trigger

3.81.7 Time to Trigger

3.82.7 Time to Trigger

The following chapters are new added:

2.1.272 Switch for notify UE when LAC/RAC changed~

2.1.275 Switch for notify UE when LAC/RAC changed

2.2.147 Switch of Whether the UE receives the Active Set

2.116.30 Cell Individual Offset for Macro and Small Concurrent

2.130.59 Switch of PS Domain DSAR for PS Load

2.176.99 Downlink Power Threshold for Releasing from High

ZTE Proprietary and Confidential

2.1.174 The Switch for Attempting on CELL_FACH for the

2.1.276 GResPara56(bit3)~ 2.1.277 GResPara56(bit4)

2.2.150 Load Filter Coefficient

2.35.2 RRC Establishment Cause

2.35.4 Service Category Based on RRC Establishment Cause

2.42.26 Event 4B Counter Threshold for CELL_DCH to PCH

2.130.60 Maximum Number of EDCH User Migration from

2.172.24 Whether Support PS(0kbps/0kbps)

2.176.104 The Switch for Attempting on CELL_FACH for the

Serial Number: SJ-20141209142030-013

ZTE Proprietary and Confidential

2.1.26 Interval of Retransmission of RRC CONNECTION SETUP...................... 2-40

ZTE Proprietary and Confidential

2.1.58 UTRAN DRX Cycle Length Coefficient................................................... 2-85

ZTE Proprietary and Confidential

2.1.86 Target Cell Judgment Strategy for Access/Handover Algorithm in

ZTE Proprietary and Confidential

2.1.114 Valid Time Window for the TB in Shield Period.....................................2-165

ZTE Proprietary and Confidential

2.1.143 Maximum Satellite Number in Position measurement Control

ZTE Proprietary and Confidential

2.1.174 Uplink Status Judgement Switch in HSPA Serving Cell Change

ZTE Proprietary and Confidential

2.1.211 whether to Support PS Handover........................................................2-294

ZTE Proprietary and Confidential

2.1.248 Difference Load Threshold for CU Load Balance ................................2-342

ZTE Proprietary and Confidential

2.1.275 Switch for notify UE when LAC/RAC changed .....................................2-380

ZTE Proprietary and Confidential

2.2.29 Switch of Forbidding AMR Deceleration Triggered by Congestion

ZTE Proprietary and Confidential

2.2.61 PS Handover Mode when CS is released for Eutran SRVCC Multi-RAB

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.2.117 The occasion of send Relocation Detect message to CN in soft

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.7.23 Reserved RUB Switch .........................................................................2-671

ZTE Proprietary and Confidential

2.9.15 E-DPDCH Puncturing Limit (10ms E-TTI, E-TFCI Table1) ......................2-723

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.11.51 Power Offset of Reference E-TFCIs for Macro-Micro Soft Handover

ZTE Proprietary and Confidential