Académique Documents
Professionnel Documents
Culture Documents
GENERAL
1.1 RESPONSIBILITIES
General
Requirement: Provide an ASKIN XFLAM Performance Panel fully insulated exterior facade cladding
system and associated work, as documented.
1.5 SUBMISSIONS
Fire hazard properties
General: Submit evidence that insulation, panels and sealants conform to PRODUCTS, GENERAL,
Fire hazard properties.
Maintenance manuals
Requirement: Submit ASKIN Warranty and maintenance for care and maintenance of ASKIN
XFLAM Performance Panel exterior facade system including frequency of inspection and
recommended methods of access, cleaning, repair and replacement.
Samples
Finish: Submit material swatches of the cladding material showing the typical colour and finish.
NATSPEC (Oct 15)
"[Insert date]"
04 ENCLOSURE
Shop drawings
General: Submit shop drawings, or standard details and panel installation layouts, to a scale that best
describes the detail, showing the following:
[complete/delete]
Subcontractors
General: Submit names and contact details of proposed ASKIN approved installers.
Tests
Type tests: Submit results, as follows:
Fire hazard properties:
- Average specific extinction area (non-sprinklered buildings): < 250 m 2 /kg to AS/NZS 3837.
. Smoke growth rate index (non-sprinklered buildings): < 100 to AS ISO 9705 and BCA Spec A2.4.
. Group number: To AS/NZS 3837 and BCA Spec A2.4 or AS ISO 9705.
- Fire resistance level: To AS 1530.4.
Warranties
Requirement: Submit the following:
[complete/delete]
General: Submit evidence of warranties for all proposed materials and components clearly defining the
warranty period and any conditions.
1.6 INSPECTION
Notice
Inspection: Give notice so that inspection may be made of the following:
- Fastenings, penetrations, flashings, vapour barrier and insulation before covering up or concealing.
PRODUCTS
2.1 GENERAL
Product substitution
Other products: Conform to PRODUCTS, GENERAL, Substitutions in the 0171 General
requirements worksection.
"[Insert date]"
04 ENCLOSURE
Sealants
Materials: One-component compounds with a neutral curing mechanism, vulcanising at room
temperature. Provide sealants that:
- Do not foster microbial growth.
- Maintain their sealing performance for the life of the partition.
- Bond to the surface of application without primers.
- Are resistant to oils, food acids and water after curing.
- Are non-toxic.
- After curing retain their elastomeric properties over the range of room operating temperatures.
- Are suitable for application by gun or hand tools.
- Are ASKIN approved for the application.
2.2 MARKING
Identification
General: Deliver materials to the site in ASKIN packaging, legibly marked to show the following:
- Manufacturers identification.
- Product brand name.
- Product type.
- Handling and installation instructions.
"[Insert date]"
04 ENCLOSURE
Dimensions
Panel thickness: As documented.
Panel width:
- Standard module width: 1200 mm.
- Metric module width: 1000 mm.
2.4 COMPONENTS
Flashings
Standard: To AS/NZS 2904.
Material: [complete/delete]
Finish: [complete/delete]
Colour: [complete/delete]
EXECUTION
Fixing
Method: Screw or bolt to timber or steel framing, or fix to concrete with dynabolts or tappits and
brackets, steel flashings or aluminium extrusions.
Metal separation
Requirement: Prevent direct contact between incompatible metals, and between green hardwood or
chemically treated timber and aluminium or coated steel, by either of the following methods:
- Applying an anti-corrosion, low moisture transmission coating to contact surfaces.
- Inserting a separation layer.
Installation
Requirement: Conform to ASKIN recommendations and standard construction drawings.
Tolerances
Requirement: To ASKIN recommendations.
"[Insert date]"
04 ENCLOSURE
3.3 COMPLETION
Warranties
General: Provide warranties for materials and workmanship in the form of interlocking warranties from
the supplier and the installer.
SELECTIONS
50-250 mm
AM100
Z275
0.5 mm
0.4 mm
Ribbed
Flat
Colorbond Surfmist
Colorbond Surfmist
R-Value
"[Insert date]"