Académique Documents
Professionnel Documents
Culture Documents
2012
Fuel monitoring
with system
About us
Since 1928, Aquametro AG has been synonymous
with a tradition in meters, owing to generations of
quality products and the targeted provision of
applied solutions.
Awareness of the large variety of individual needs
we encounter around the world in business, ecology
and culture influences us on how we react. Our
closeness to the market is based on our continual
willingness to tread new waters to find the most
optimum solutions.
The experiences and competences acquired by
our employees in Switzerland, our subsidiaries
and representatives worldwide, are implemented
effectively on an every day basis.
Marine Division
The marine division of our company offers not
only flow measurement for marine diesel and
heavy fuel oil. The main focus is on fuel (monitoring) management systems and fuel conditioning for fuel systems on board of vessels.
Innovative system components, communication
interfaces and analysis solutions pay off not only
when it comes to saving fuel. Convinced users
also appreciate the operating simplicity and the
sustainable learning effect of efficient fuel management and conditioning.
Confidence
Success needs reliance. Our customers appreciate our proximity to them, with a single point of
contact, taking their demands and requirements
seriously. This makes us proud and guides our
actions. Customer satisfaction creates trust and
means success.
Marine Systems
Solutions for fuel saving and control of emissions
Milestones
1928
1986
1993
1997
2008
Founding of Aquametro AG
Test center recognized as Swiss verification body
First accreditation to ISO 9001
Accreditation of test center to EN 45000 (water, heat, oil)
First accreditation to ISO 14001 and OHSAS 18001
System Solutions
From sensors to monitoring tools
Wind
GPS
LAN
Fuel Performance
Recorder
Diesel
Fuel tank
HFO
Fuel tank
Diesel
Switch
Shaft power
CONTOIL
Fuel meter
Mixing
Tube
Viscomaster
Viscosity & Density
Viscosity
Controller
Fuel metering
of all fuel types
Product features:
Nominal diameters DN 15...50
Temperature up to 180 C
Protection type IP 66
No straight inlet and outlet necessary
Special designs for pressures up to 40 bar
Flow range from 10 to 20000 l/h nominal flow
Viscosity controlling
measure, heat and control
Viscosity Control
Aquametro offers a robust viscosity sensor for
measuring the viscosity and density of the heavy
fuel oil before it enters the engine, as well as an
LCD viscosity controller that controls the motor
controlled 3-way valve to regulate the heaters.
This way, fuel is always heated to the temperature at which it can be injected with the optimal
viscosity, resulting in better combustion and
engine performance.
Product features:
Sensor
Calibration range 0.5 to 100 cP
Temperature up to 200 C
2 analog outputs
Protection type IP 66
Power supply: 20...28 VDC
Controller
Up to 2 relay and 2 analog outputs
switchable controlling input (VC3xx)
Power supply: 100...250 VAC
Valve
Motor control valve diameters DN15100
Power supply: 100...250 VAC
Fuel switching
changeover and blending
Diesel Switch MK II
Aquametro proudly presents the first certified
(GL) Diesel Switch MKII, enabling convenient
switching between heavy fuel oil and marine
diesel. Automatic switching prevents human
error and damage by thermal shocks.
Furthermore, the Diesel Switch has the option
to blend the fuel to a set sulphur level, allowing
to operate the engine with the maximum
allowed sulfur level and save money.
Homogenizer
The Homogenizer improves the uniformity of
HFO and "water in fuel emulsion" to enhance the
combustion quality and to reduce emissions.
It operates on mechanical shearing and ultrasonic forces.
A high hydrodynamic power homogenizes the
high molecular asphaltenes, existing cat-fines
and remaining water into heavy fuel oil with a
maximum particle size of 5m.
Product features:
Nominal diameters DN 32...100
Fuel record book (blend or change over)
Optimized control algorithm
Product features:
Temperature
Shaft metering
measure your ships power
CONTthrust
Aquametro offers a state of the art shaft power
measurement system. This equipment is mounted to the shaft, and measures the actual thrust
and torque delivered by the engine.
Knowing these forces is a great advantage,
because not only the engine performance can be
monitored, but also the ships efficiency as a
whole: propeller and hull, independent of sea
and weather conditions.
Product features:
Shaft
diameters DN 250...1000
HD sensor technology
long lifetime
minimum maintenance
Fuel monitoring
Ocean vessels
Product features:
CFM-S
low installation cost
upgradeable
FPR
high accuracy
multiple signals in one tool
full transparency
FPM Client SW
basic trends
data logging for reports
FPA
voyage management
consumption overview
reporting
Contoil Fuel
Monitor-Tug: CFM-T
The CFM-T is the ideal solution for offshore
vessels and riverboats, typically with multiple
engines running on Diesel oil. Offshore and
supply vessels, workboats and tugboats can
manage their bunkering and fuel consumption
for each individual engine conveniently.
The CFM-T is the center point for different flow
meters for up to 8 engines. It collects and
stores all data, and makes it available for
reporting.
The basic version consists of a PLC with display. Optionally, rpm and running hours as
well as a panel-PC can be added to show
graphically consumption and other properties,
for optimized visualization of performance.
Product features:
Power supply 12-24VDC
quick and easy installation
no extra maintenance
Product features:
Power supply 24VDC
up to 8 engines in 1 system
tamper proof measurement
Support
hassle-free, easy and certified competence
Comprehensive Package
We offer attractive services from product consultation, installation to service and maintenance contracts. Upon request, we also offer
training programs, focusing on specific topics
and are available to answer any questions. For
the latest product information on data sheets,
technical documentation, installation, operating instructions, declarations of conformity and
tender specifications, please visit our website
www.aquametro.com.
www.aquametro.com
HEAD OFFICE:
Aquametro AG
Ringstrasse 75
CH-4106 Therwil
Switzerland
Phone +41 61 725 11 22
Fax +41 61 725 15 95
marine@aquametro.com
www.aquametro.com
SALES PARTNER:
Quality Assurance