Code No: 09480102 . ; ee
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
B. Tech IV Year I Semester Examinations, May - 2013
Design and Drawing of Irrigation Structures
(Civil Engineering)
Hours
: ‘question frouy Part - A
Answer oite question from Part — B
Part ~ A (45-Marks)
1. ooDesign a sugpli. weir for a faik-having a Mood discharge of 8(nitisec, with tie!
following data,
ETL. ~ 410,00 Co forthe weir----0.6
+ 10.75 * G.L. at the location of the weir ~~ - + 9.00
a t ing walls, return walls, aprons.ci
“Any other datd-tequired may-be'Suitably assaniédl: Draw the plan ind longitudi
section on asuitable scale,
2. Design a trapezoidal Notch type of canal fall with the following data,
‘anal above-the Fall Canal below the Fall:
+ 12.00 ESL. -
FE.
- + 10.00
Bed level ---- + 10.50 Bed level ---- +850
‘Top level of the Bonk - - - + 13.00 Top level of the Bank - - - + 11.00
Fall supply depth --- + 1.4m Fall supply depth ---- 1.4m.
f supply depith - -- - Oat: ‘supply dept 1.0m
Canal bed width may be taken as 5.8 m on both sides. Full supply discharge in the
canal is 4.0 m/sec. Any other data required may be suitably assumed. Draw the
plan and section of the Notch fall on a suitable scale giving all the design details,
Design a type IIT syphon Aqueduct in a canal with the data given below.
Discharge in the canal ----- 30 m/sec
Bed width of the canal -
Ultimate F.S.L. +53.00
Average velocity in the canal -
Top widths of both the Banks -
-0.75 msec
5.00mAverage GIL. of the drain -
Discharge in the drain - -
+ 50 m/sec
Max. Flood level of the drain at the site - -
Average Bed level of the drain at the site
Hard soil ig niet below —
“Assume any otter data required Suitably,
4. Design a canal regulator with the following data.
.U/S canal
°S.Q. mi/sce
“Bed width >< 14m
Bed Level - + 10.00
F.S. depth ----- 2.0m
FSL. - + 12.00
‘Top level of Bank ---- + 13.00
Assume Top widths of Banks as 4.0 m for both the canals. Good foundations are
available at + 9.00 m. Assume any other data required suitably.
00000--