Académique Documents
Professionnel Documents
Culture Documents
VT18-8-400-M-LAS/40a/118/128
Dimensions
Detail "A"
M18 x 1
24
2
43.8
44.6
47.1
53.9
65
78
Detail "A"
Indicating/
Operating means
7.8
11.2
Light/dark switch
SENS.
Model Number
VT18-8-400-M-LAS/40a/118/128
Diffuse mode sensor
Electrical connection
Features
M18 threaded housing made of brass,
nickel plated
Option:
1
+UB
n. c.
0V
/128
= Light on
= Dark on
Pinout
1
4
VT18-8-400-M-LAS/40a/118/128
Technical data
Accessories
700 a
20 a
0%
Indicators/operating means
Operation indicator
Function indicator
Control elements
Output
Switching type
Signal output
Switching voltage
Switching current
Switching frequency
Response time
Ambient conditions
Ambient temperature
Storage temperature
Mechanical specifications
Protection degree
Connection
Material
Housing
Optical face
Mass
BF 18
Mounting flange, 18 mm
BF 18-F
Mounting flange with dead stop, 18 mm
Electrical specifications
Operating voltage
No-load supply current
Protection class
OMH-VL18
Mounting Bracket with swivel nut
BF 5-30
Universal mounting bracket for cylindrical
sensors with a diameter of 5 ... 30 mm
V1-G-2M-PUR
Female cordset, M12, 4-pin, PUR cable
V1-W-2M-PUR
Female cordset, M12, 4-pin, PUR cable
Other suitable accessories can be found at
www.pepperl-fuchs.com
10 ... 30 V DC , class 2
< 25 mA
II , rated voltage 250 V AC with pollution degree 1-2 according
to IEC 60664-1
light/dark on, switchable
Push-pull output, short-circuit protected, reverse polarity protected
30 V DC
max. 200 mA
500 Hz
1 ms
-25 ... 55 C (-13 ... 131 F)
-30 ... 70 C (-22 ... 158 F)
IP67
connector M12 x 1, 4-pin (Vario-Quick quick connect technology)
brass, nickel-plated
plastic
60 g
II, rated voltage 300 V AC with pollution degree 1-2 according to IEC 60664-1
UL approval
CCC approval
General specifications
Detection range
Detection range min.
Detection range max.
Light source
Light type
Laser nominal ratings
Note
Laser class
Wave length
Beam divergence
Pulse length
Repetition rate
max. pulse energy
Diameter of the light spot
Optical face
Ambient light limit
Hysteresis
VT18-8-400-M-LAS/40a/118/128
Curves/Diagrams
VT18-8-400-LAS
Offset Y [mm]
6
4
2
0
-2
-4
-6
0
50
100
150
200
250
300
350
400
450
Distance X [mm]
VT18-8-400-LAS
50
100
150
200
250
300
350
400
450
Distance X [mm]
white 90 %
grey 18 %
black 6 %
Detection ranges
VT18-8-400-LAS
Object colour
black
grey
white
50
100
150
200
250
300
350
400
450
Distance [mm]
x
VT18-8-400-M-LAS/40a/118/128
Curves/Diagrams
Emission divergence
Light spot dimensions [mm]
12
Light spot
10
8
6
4
2
0
0
50
100
150
200
250
300
350
400
450
Distance X [mm]
Adjustment
Sensitivity adjustment
Turn sensitivity adjuster (counterclockwise) to minimum position.
optimal setting
Place the object to be detected in the sensing range and turn the sensitivity adjuster
position A
position B
clockwise until the yellow indication LED lights up. This setting indicates the position A
yellow
LED
of the sensitivity adjuster.
Remove the object. Increase the sensitivity slowly (turning the sensitivity adjuster
clockwise) until the yellow LED lights up again. This setting indicates the position B of
the sensitivity adjuster.
Note:
SENS.
In case of no background object, the LED wont light up, even in MAX. adjustment. In
that case take care, that in normal operation conditions no temporal background object
light/dark switch
sensitivity adjuster
can appear in the sensing range (e. g. parked pallets). If this can not be excluded,
place (only for adjustment matter) an object at the appropriate location. Then repeat
this adjustment step. After finishing the adjustment this temporal object should be
removed.
For optimal setting, now turn the sensitivity adjuster to the middle position between the positions A and B.