Académique Documents
Professionnel Documents
Culture Documents
Introduction
. MINERVA MX PANELS
. MINERVA MARINE T2000 PANELS
. ZETTLER EXPERT PANELS
. MINERVA SOLO PANELS
Features:
Page 1
23SeptMXCat. qxd 11/10/02 11:42 pm Page 2
Table of Contents
3 MX Panels
10 MX Panel Components
19 MX Graph/ MX Net
22 Batteries
30 Detector Ancillaries
34 Detector Housings
35 MX Ancillary
38 MX Addressable
Input/Output Modules
42 MX Ancillary Housing
45 Sales Tools
46 Approvals
tyco
48 Product Code Index
Page 2
23SeptMXCat. qxd 11/10/02 11:42 pm Page 3
MX Panels
MX Detection Panels
Tyco MX detection
panels use all the features of Tyco MX Technology Tyco MX detection panels include:
to provide the latest fire detection technology . MINERVA MX for EN54 LPCB approved . Viewing and printing status
meeting the latest worldwide standards in cost- systems
effective, expandable packages. . ZETTLER EXPERT for EN54 LPCB & VdS . Viewing and printing isolated points
Tyco MX detection panels support Tyco approved systems . Manual and automatic walk test and reporting
functions
MX Technology: . MINERVA EXPERT T2000 for Marine approved
systems
. MX VIRTUAL Multi-sensor detectors . Viewing and printing maintenance reports
Other variants available soon will carry UL, ULC,
. MX DIGITAL high speed reliable digital . Extensive diagnostic functions including
FM, SSL and other European listings and
protocol simulation and force outputs
approvals.
. MX FASTLOGIC fuzzy logic smoke detection
Tyco MX detection panels include a . Text and configuration changes
algorithms
powerful user interface:
. MX CCO universal carbon monoxide fire . Automatic battery test
detection algorithms . 640 Character display
. Detector service functions
Tyco MX detection panels provide . Displays first alarm and most recent alarm
Tyco MX detection panels include very
modular cost effective solutions: . Permanently displays systems status including
. Networked panels from 1 to 396 detection powerful event/action programming
number of alarms, number of faults, number of
loops isolated points including:
. Powerful central loop processing functions . Scroll function allows details of all events and . Seamless network wide event/action
status to be easily viewed . 240 x 240 Output map and output sequencing
. Powerful and modular user interface algorithms
. Displays temperature, CO level and smoke
. MX REMOTE diagnostics and service level at point in alarm . Over 1500 event/action groups for the most
functions complex applications
. Displays 95 character custom messages for
emergency procedures . Templates for fast programming of standard
. MX GRAPH graphical user interfaces
Tyco MX panels include advanced applications including:
. Designer and modular housing options - EN54/BS5839
manager and engineer functions
- EN54/VdS
Tyco MX detection panels provide long term fire
including: - EN54 Marine
detection solutions including upgrade paths from
earlier panel models and a long term develop- . Menu driven
. User defined templates
ment strategy providing future upgrade paths.
. Multi-level password protected
. Time, date and special day programming
. Viewing 1000 event log . Wide range of co-incidence, double knock
and delay functions
. Detailed fault reporting
Page 3
23SeptMXCat. qxd 11/10/02 11:42 pm Page 4
The batteries and any additional zone LEDs or the zone LED modules pre-fitted.
operator controls and firemans interface are Product Code Where no additional controls are required the low
mounted in a separate housing which can be 557.200.007 cost MX-BATT battery box can be used for
mounted below the main panel or behind the MX-BBX-40LED 17Ah battery box with 40 zone housing up to 38Ah batteries and IOB800 boards.
panel. The matching battery and expansion box is LEDs Product Code
available with shallow (17Ah) or deep backbox 557.200.008 557.200.016
(38Ah) according to the batteries used. The MX-DPBBX-40LED 38Ah battery box with 40 Zone MX-BATT Deep battery box
chassis plate in the battery box also has space LEDS.
for up to 2 x IOB800 input/output expansion
modules (maximum 24 I/O) or 1 x MX FILNET or
1 x PSM/PSB800.
Product Codes
557.200.005
MX-BBX 17Ah shallow expansion and battery box
557.200.019
MX-BBX-F 17 Ah shallow flush expansion and
battery box
557.200.006
MX-DPBX 38Ah deep expansion and battery box
Certain popular configurations are available with
Page 4
23SeptMXCat. qxd 11/10/02 11:42 pm Page 5
MINERVA MX Repeaters
The MINERVA MX repeater with Power Supply is Product Codes
connected to the Panel via the remote bus Standard Repeaters
(RS485, 1200 m distance). A maximum of 2 557.200.012
repeaters (including one MX REMOTE repeater) MXR Repeater with shallow backbox
can be linked to each MINERVA MX panel and 557.200.017
can provide full repeater functions for all panels MXR-F Repeater with flush backbox
on the system. 557.200.013
MXR-PSU Repeater and addressable PSU
The operator control module (OCM800) can 557.200.018
support up to 80 inputs and outputs in the form of MXR-PSU-F Repeater and addressable PSU with
LED annunciators, IOB800 input/output modules, flush backbox
XIOM universal I/O modules or XIOM 800 LED Options
mimic module. 557.202.006
IOB-800 (8in/8out) expansion board
557.180.005
The MINERVA MX full function repeater is an Mimic driver module
EN54 LPCB approved repeater with optional 557.180.016
addressable EN54:Pt.4 power supply. The XIOM universal I/O module
repeater consists of a steel backbox and cast 557.202.028
aluminium front door which incorporates the RSM800 PSU Module
ODM800 operator display module with a 16 x 40- 557.202.042
character backlit LCD display, simple 24VDC Repeater Cable Assembly
alphanumeric keypad, 5 softkeys and a fast
access key. The OCM800 operator control
module provides all mandatory operator control
keys and LED functions including Day/Night
switching. Two control keys and 2 indication LEDs
are provided for site-specific functions.
Page 5
23SeptMXCat. qxd 11/10/02 11:42 pm Page 6
Page 6
23SeptMXCat. qxd 11/10/02 11:42 pm Page 7
Page 7
23SeptMXCat. qxd 11/10/02 11:42 pm Page 8
3 Tier 5 Tier
Dimensions (mm) 588H x 600W x 200D 854H x 600W x 200D
Approx Weight 22.5Kg 31.5Kg
Temperature (Storage) -20oC to +70 oC -20oC to +70 o C
Temperature (Operating) -8oC to +55o C -8oC to +55 oC
Humidity up to 95% RH, Non-Condensing
Colour (Housing) Dawn Grey (BS 4800 10A-03)
Colour (Modules) Pantone 431C
EMC/RFI EN 50130-4
Shock EN 54-2
Vibration EN 54-2
Lockable Window On MX4000M Versions Only
Page 8
23SeptMXCat. qxd 11/10/02 11:42 pm Page 9
CPU
ODM
TLI
PSB
RBus FRONT
FIM
DOOR
Loop C
XLM Loop A
Loop D OCM
110-240Va.c.
Loop B
TUD/ ANN880
IOB PSB/PSM ANN840
IOB
or COM820
MX
FILNET FRONT
DOOR
ANN880
17 or 38Ah 17 or 38Ah ANN840
MPM
or COM820
R Bus
CPU OCM ODM
TLI
PSB
FIM XBus
PSB/PSM
TUD/ IOB
IOB MX
FILNET
FRONT
DOOR
17 or 38Ah 17 or 38Ah
BACKB OX
Page 9
23SeptMXCat. qxd 11/10/02 11:42 pm Page 10
MX Panel Components
CPU800 Expert Central Processor
detection panels. The Board provides 4 serial channels to the
The CPU-800 contains a Data Memory (SRAM), a FIM800 - 2 for RS232 (PCs, modems, printer
Program Memory (Flash EPROM), a Configuration and/or data loggers), 1 for the remote bus
Memory (Flash EPROM) and a Boot ROM (RBUS) to the main user interface and repeaters
(EPROM). The use of flash EPROM allows and 1 for Network Port (FSI, ThornNet/MX Net or
program upgrades to be downloaded locally or MX-FILNET)
remotely without the need for changing chips. Technical Specification
The CPU-800 provides power for the following 32 bit Processor: Motorola 68331
functions: Data Memory SRAM: 1 MByte
. Full alarm and fault monitoring for up to 1000 Prog. Memory Flash EPROM: 2 MByte
addressable points including central loop Config. Memory Flash EPROM: 1 Mbyte
processing of MX Fastlogic expert algorithms Boot EPROM: 64 kByte
. Concurrent operation of the main user Number of serial Interfaces: 4
interface and 2 remote user interfaces Quiescent Current: 67mA
including one remote dial up or networked Alarm Current: 67mA
The CPU-800 provides the main processing user interface Product Codes
power behind the MX detection panels. It is a . Peer to peer interaction with up to 99 other MX 557.202.002 (Spare only)
multi-layer PCB and contains the CPU, the detection panels CPU800 standard MX central processor (UK)
memory and interface electronics. The CPU-800 . Cause and core effect using up to 1000 input, 542.002 (Spare only)
plugs into the Field Interface Module (FIM800) output groups, delay timers and logic CPU800 standard MX central processor
which forms the motherboard in most MX functions (EUROPE)
Page 10
23SeptMXCat. qxd 11/10/02 11:42 pm Page 11
Page 11
23SeptMXCat. qxd 11/10/02 11:42 pm Page 12
Page 12
23SeptMXCat. qxd 11/10/02 11:42 pm Page 13
Page 13
23SeptMXCat. qxd 11/10/02 11:42 pm Page 14
Page 14
23SeptMXCat. qxd 11/10/02 11:42 pm Page 15
Page 15
23SeptMXCat. qxd 11/10/02 11:42 pm Page 16
Desktop Printer
Features Storage Temp.: -15C to 40C
300 cps draft/ 90cps LQ. Relative Humidity: 10% to 80% RH
Quiet operation [non-condensing]
Lightweight and compact design Operating Voltage: 180V to 264Va.c.
9 LQ fonts
EMC: BS EN 50081-1 and BS EN 50082-1
2 paper feed paths
Convertible push/pull tractor Product Codes
Paper guide UK EUROPE
Auto loading 557.180.239
Paper park MINERVA printer LQ-300+
Cable feed recess
Epson LQ standard terminal emulation 557.180.220
available LQ80 ribbon black (spare) for use with desktop
Parallel and serial interface printer.
The printer is designed as a low cost business Technical Specification 557.202.117 542.009
printer ideally suited for mounting adjacent to the Dimensions: 159H x 366W x 275D mm
fire control panel.The LQ-300+ combines high MX FIM/MPM to serial printer lead
Weight: 4.4kg
performance with paper handling flexibility and
quiet operation. Operating Temp.: 5C to 35C
Page 17
23SeptMXCat. qxd 11/10/02 11:42 pm Page 18
In-built Printer
Features Product Codes
. A thermal printer mechanism which ensures 557.202.024
high reliability. PRN 800 Printer c/w front cover module
. Quiet Operation 557.301.014
. Lightweight and Compact Design Spare Paper Roll (pk of 5)
. High Speed Printing: 40mm per second.
. High quality printing: 384 dots.
. 32 Columns
. Friction paper feed
Technical Specification
Dimensions: 230H x 137W x 85D mm
The PRN800 Printer Kit is designed for use with
the designer range of MX Controllers (MX1000, Weight: 0.38Kg
MX4000 and T2000). It is fitted to the front cover Operating Temp: +5C to +45C
of the MX battery housing and is powered from Storage Temp: -20C to +70C
the PSB 800 power supply via an FB800
Relative Humidity: Up to 80% non-condensing
fuseboard in the MX Controller housing.
EMC: BS EN 50081-1 for emissions
BS EN 50082-1 for immunity
Page 18
23SeptMXCat. qxd 11/10/02 11:42 pm Page 19
MX Graph/MXNet
MXGraph
zoom magnifications are all imported from MXGraph can be connected to up to 99
AutoCad. This configuration tool significantly networked MX fire panels using the LPCB
reduces configuration time, increases the integrity approved MXNet. MXGraph will also be available
of information and enables simple updates to the for use with up to 64 MX fire panels networked
using the LON based VdS approved FILNET.
system in the future.
MX net will support up to 3 fully operational
Features MXGraph user interfaces on a network plus
Combined text and graphics display on a additional units operating as graphical mimics.
single P.C. MXGraph consists of a standard personal
Connected to MXNet, a single system can be computer, that is linked onto the MXNet via a TLI-
used to monitor up to 99 MX fire controllers 800 network interface module. MXGraph is
primarily operated by either mouse or touch
Designed for touch screen operation screen, with the two monitor options available
Simple operator controls, no Qwerty keypad 17or 22touch screen.
High resolution colour SVGA display
For an up to date specification of the latest
Windows NT TM multi-tasking operating system approved PC platform, contact the Fire Product
Four level automatic zoom sequence available Manager.
Introduction for each point
MXGraph is a fully integrated graphical and text Overview map maintains a view of wider areas Product Codes
user interface for use with MINERVA MX , whilst zooming into detail in the graphics 508.020.007
ZETTLER EXPERT and MINERVA T2000 window
Compatibility tested PC for MX & ThornGraph
networked fire panels. Procedure window provides additional text
graphics terminal preloaded and configured with
and operator instructions for each event
Whether the installation uses a single sub-panel default passwords
Classification of events helps to maintain a
or up to 99 networked sub-panels, MXGraph 508.020.006
record of activation and the causes
provides a seamless integrated graphical mimic 22 inch IIyama Touch Pro
Browse icons placed on maps can be used to
with full alarm management and panel control pan across an installation in a logical 636.006.060
capability. sequence 17 inch Standard monitor
MXGraph has been designed with clear displays Control icons placed on maps can be used to 508.020.201
and simple controls which can be quickly and initiate actions at the MX fire controller, used to Software package A for 1 network node
easily understood by an operator rather than an operate ancillaries such as HVAC
engineer. The system is designed to be used with 508.020.202
Automatic configuration using the GRAB-IT
a touch screen or mouse and does not require Software package B for 2-5 network node 5
tool, including Cad drawings, text messages,
the use of a Qwerty keyboard. locations, flood fills and zoom areas 508.020.203
Using the secure acknowledged transfer of Full password protection and multiple operator Software package C for 6 or more network nodes
events, up to three MXGraph systems can be levels 508.020.204
used to monitor up to 99 MX controllers Remote control of MX fire controller across the Software package D for additional graphics nodes
connected to an MXNet. network on the same MXNet
MXGraph uses a unique configuration tool GRAB- Real time on line event management and MXGraph is functionally similar to Thorngraph.
IT, (Graphical, AutoCad, Bitmap, Information, historic information system For full details of upgrade paths contact the Fire
Transfer) to automatically configure the system. User designed search keys can be used to Product Manager.
Installation plans, device type and location, flood generate specific and useful reports
fill areas, flood fill locations, zoom areas and Available in English, Dutch and Spanish
TLI800
Network
Interface
TLO530 TLO530
Fibre
Fibre
Interface
Interface
Max distance between
nodes is 4000m using
fibre optic cable
Page 19
23SeptMXCat. qxd 11/10/02 11:42 pm Page 20
TLI-800
The key hardware component that makes the
network possible is the LPCB & UL approved
network card TLI-800. The TLI-800 provides the
electrical/mechanical means to connect the
components of the network to local and remote
network signalling circuits. Installation of the TLI-
800 is simplified with an edge connector that
plugs onto the main processor board of the MX
controller. The TLI-800 provides RS-485
communications over a twisted shielded pair as a
standard configuration. The distance between
controllers can reach 3,000 metres at a speed of 557.200.038
38.4 Kbs using 18AWG twisted shielded cable. 557.202.026
TLI-800G ThornNet interface for MXGraph PC c/w
It fits within the MX panel housing. Later versions TLI-800 MXNet network node interface module 240V PSU and housing
of the MX Panel software will be compatible with 557.180.219
ThornNet and TFXNet. This uses the TLI/TLK530 NOTE: TLK-530 and TLK530-G can be upgraded
to TLI-800 and TLI-800G with a firmware change. MXGraph PC to TLK-530-G & TLI-800G
network or the TLI-800 with different firmware. connection cable
TLO-530
The Fibre Optics Module (TLO-530) is used to Up to two units can be fitted into a TLO/TLD
interface one fibre optic channel to the TLI-800 Housing which has a chassis plate to
module. The TLO - 530 fibre optic interface accommodate the units.
module converts RS-485 digital data current Technical Specification
pulses from the TLI-800 network interface module
Dimensions: 210H x 130W x 30D mm
to light pulses. The light pulses are then carried
over fibre optic cabling to another TLO-530 where Weight: 460g
the pulses are converted back to RS-485 digital Product Codes
data current pulses. Two TL0-530 modules are 976166
required per panel for redundant path star
TLO 530 ThornNet/MXNet fibre optics interface
connections and when using fibre optics in both
assembly
directions of ring and bus connections. Two (2)
type 62.5/125 fibres between controllers (4 fibres 557.180.148.A
when using redundant path star connections) TLO/TLD Housing - ADT branded
allow the interface to transmit signals at 38.4 Kbs
at distances as high as 4,000 metres between
controllers.
TLD-530
The Telephone Line Drive Module (TLD-530) is Technical Specification
used to interface two (2) dedicated telephone line Dimensions: 170H x 120W x 20D mm
circuits to the TLI-800 module. The TLD-530 line Weight: 140g
driver module converts the RS-485 signals Product Codes
received from the TLI-800 network interface 557.180.699
module to signals capable of being transmitted TLD 530 ThornNet/MXNet direct line driver PCB
over the telephone line circuits. One TLI-800
557.180.148.A
supports two channels so only one module is
TLO/TLD Housing - ADTbranded
required per controller for both single path and
redundant path star connections. The interface
allows for field configured baud rates and
supports distances of up 3,000 metres. Up to two
units can be fitted into a TLO/TLD Housing.
Page 20
23SeptMXCat. qxd 11/10/02 11:42 pm Page 21
220-240Va.c.
24V.d.c. 24 Vd.c.
Callpoint
MXS 8/16
MSR Repeater MSR Repeater
Fire output
Fault output
PIM CIM
Sounder 1
Sounder 2
Aux. output
MIM
557.301.005 SNM
MSPPrinter
MX Virtual Sounders
Detector
557.301.012
Programming Lead
DIN
557.301.102
Keyboard Callpoint
DIM
Laptop
SOLO Remote
Page 21
23SeptMXCat. qxd 11/10/02 11:42 pm Page 22
Batteries
Product Codes 3071 560.001.016
660.001.003 Battery sealed L-A replaces 660.001.009 and Battery sealed L-A replaces 3148, SLA17 and
Battery sealed L-A 30-105 30-109
560.001.013 660.002.010 660.001.004
Battery sealed L-A replaces parts 3145 and Battery sealed L-A replaces 3146, SLA04 and Battery sealed L-A (Bolt terminal) replaces 3014,
30-102. 30-112 SLA24 and 30-106
3085 3072 560.001.012
Battery sealed L-A replaces 660.001.014 and Battery sealed L-A replaces 660.001.005, SLA07 Battery sealed L-A replaces 3149, SLA38 and
30-111 and 30-110 30-107
3010 660.002.012 3150
Battery sealed L-A replaces 660.001.007, SLA21 Battery sealed L-A replaces 3147, SLA012 and Battery sealed L-A replaces SLA65 and 30-108
and 30-103 30-110
Page 22
23SeptMXCat. qxd 11/10/02 11:42 pm Page 23
Page 23
23SeptMXCat. qxd 11/10/02 11:43 pm Page 24
Detection Modes
All 800 Series detectors communicate to the MX to operate in one or two of several detection To meet detection applications with multiple risks
detection panel using the fast reliable MX modes, thus allowing it to be easily optimised to the 800PH and 800CH detectors allow two
DIGITAL loop protocol. This allows each detector the risk. detection modes to operate simultaneously.
Virtual Detectors
The use of virtual detection means that Some MX detection panels even allow the reduced by reducing manufacturing, stocking and
installations can change the detection mode detection mode to be changed at different times service stocks. This also reduces the number of
without any physical change, taking place. Not of the day or automatically as occupancy and times detectors have to be changed during the
only can the detection be changed at the time of activity in the space changes. life of the installation.
installation and commissioning but also during As well as providing great flexibility, using only
the life of the building as building usage changes. two detector models means whole life costs are
The 800PH Series support the The 800CH Series support the
following detection modes following detection modes:
incorporating MX FASTLOGIC expert . Multi-sensitivity Carbon Monoxide
algorithms: . Temperature Enhanced CO (CCO)
. Multi-sensitivity Optical . Fixed temperature heat
. Temperature compensated . Rate-of-rise heat
optical (HPO)
. Fixed temperature heat
. Rate-of-rise heat
Page 24
23SeptMXCat. qxd 11/10/02 11:43 pm Page 25
Product Codes
Branding ADT THORN WORMALD ZETTLER TYCO
801CH 516.800.501.A 516.800.501.T 516.800.501.W 562.001 516.800.501.Y
811CH 516.800.508
Page 25
23SeptMXCat. qxd 11/10/02 11:43 pm Page 26
Page 26
23SeptMXCat. qxd 11/10/02 11:43 pm Page 27
E = Temperature enhanced Bold text indicates most likely detector/mode to meet users
E+H = Temperature enhanced and heat detector together requirements.
H = Heat only part of combined detector Letters in brackets represent recommended sensitivity settings.
X = Callpoint protection alone *Not available as part of 800 range.
#Not LPCB approved
Table is for guidlines only and specific situations are likely to require variations on the suggested detector types. Real situations may require detector combinations to
cover all likely risks.
Night and Day columns represent low false alarm risk and high false alarm risk, although this usually follows a day/night pattern, it may be configured for any time.
For example the car deck of a ferry would be configured for Day during vehicle loading and Night once all the passengers had left the car deck, thus achieving
optimum protection for that area.
If fastlogic operation is selected for optical detectors, the same table applies. The chief difference being a higher resistance to false alarms, and slower response to
aerosol test gas.
Page 27
23SeptMXCat. qxd 11/10/02 11:43 pm Page 28
Product Code
AM2801/000
ID Card
Note: Cards must be ordered in multiples of 100.
Page 28
23SeptMXCat. qxd 11/10/02 11:43 pm Page 29
6B - 6 Universal Base
Especially designed for applications using the US Features
style single gang backbox the 6 base provides . Waterproof gland protects the detector from
an attractive styled alternative to the 4 base in water ingress from the rear
most applications. The 6 base is particularly . Remote LED connections
useful for retrofit applications where large holes . Anti-tamper facility
left by previous installations cannot be covered by . Includes blanking pieces for mounting holes
the 4 base. Product Codes
517.050.606
6B-6 detector base (UL)
Page 29
23SeptMXCat. qxd 11/10/02 11:43 pm Page 30
Detector Ancillaries
800 Series MX Address Flag
The 800 Series detectors incorporate a feature, Product Codes
which automatically transfers the address flag to 516.800.915
the detector base, when the detector is plugged MXAddress flags (pack of 100)
into the base. On removal of the detector the 516.800.931
address flag remains on the ceiling, thus ensuring Address flag labels Loop A - White
that detectors are not accidentally returned to the 516.800.932
wrong detector base following service routines. Address flag labels Loop B - Yellow
Most MX detection panels incorporate additional 516.800.933
fail safe software features to ensure that incorrect Address flag labels Loop C - Purple
detector positioning does not compromise the 516.800.934
system. Address flag labels Loop D - Green
Address flags are supplied in packs of 100.
Labels are provided on sheets of 250 in four
colours to enable quick identification between
different loops.
Page 30
23SeptMXCat. qxd 11/10/02 11:43 pm Page 31
Page 31
23SeptMXCat. qxd 11/10/02 11:43 pm Page 32
Page 32
23SeptMXCat. qxd 11/10/02 11:43 pm Page 33
Page 33
23SeptMXCat. qxd 11/10/02 11:43 pm Page 34
Detector Housings
MP69 - Standard EN54 Duct Probe Unit
The MP69 is a tough fire resistant plastic Product Codes
enclosure incorporating an MUB universal UK EUROPE
detector base for use with 801PH optical 517.025.036 572.001
detectors. A clear polycarbonate cover allows the MP69 duct probe
detector and alarm LED to be easily viewed. An 517.001.035
internal baffle and precisely designed inlet and DP450 mm probe tube and exhaust
exhaust tubes provide maximum sensitivity at 517.001.036
very low air velocities. DP600 mm probe tube and exhaust
Features 517.001.037
. Probe tubes available from 450 to 1500mm DP750 mm probe tube and exhaust
(Minimum 200mm) 517.001.038
. Suitable for air speeds from 1.5 to 25m/s (4.9 DP900 mm probe tube and exhaust
to 82 feet/second) 517.001.039
. Optimised for fast response to smoke particles DP1200 mm probe tube and exhaust
. Easy access for detector servicing 517.001.040
DP1500 mm probe tube and exhaust
# 1lpu (Loop Power Unit) = 15mA Loop Current or 25mA @ 24Vd.c. for Battery Calculations
Page 34
23SeptMXCat. qxd 11/10/02 11:44 pm Page 35
MX Ancillaries
Callpoints & Pullstations - CP820 Indoor Callpoint
Technical Specification Product Codes
Meets BS5839 Pt.2 and pr EN54 Pt:11 514.800.503.T
EMC/RFI: Equal or exceeds EN50081- CP820 Indoor Callpoint (English Thorn
1 & EN50082-1 Branded)
Operating Temp.: -20 to +70oC 514.800.503.A
Relative Humidity: up to 95% RH non- CP820 Indoor Callpoint (English ADT Branded)
condensing 514.800.503.Y
Dimensions: 87H x 87W x 51(19mm flush CP820 Indoor Callpoint (English TYCO Branded)
mount)D mm 552.006
Weight: 200g CP820 Indoor Callpoint (International)
Quiescent Current: 0.25mA 514.800.511.T
Alarm Current: 2.5mA Thorn KAC Indoor Callpoint (Dutch)
Ident. Value: 129 552.004
The CP820 is an indoor MX addressable manual Zettler KAC indoor Callpoint (Dutch)
callpoint with programmable status LED. The 514.800.505.T
CP820 is designed for LPCB approvals and the CP820M Marine Indoor Call Point (Thorn)
CP820M for Marine approvals. The CP820
provides high speed communication to the MX
panel of a manual fire alarm.
Page 35
23SeptMXCat. qxd 11/10/02 11:44 pm Page 36
STOPPER
The callpoint STOPPER provides protection from
malicious or accidental activation of manual
callpoints. Available for flush or surface mounted
callpoints the STOPPER is also available with
optional high pitch sounder which is activated
when the lid is lifted.
An optional Break-Seal fitting kit allows Break-
Seals to be used to provide extra protection.
WARNING:-Break seals only to be fitted by
agreement with relevant fire authorities.
The STOPPER is suitable for all callpoints up to
100mm square, including CP820, CP920, CP200 Product Code
and other indoor KAC style callpoints. 515.001.033
IPO36 Break Seal Kit
STOPPER Dimensions
Millimetres
A 137
B 140
C 104
D 45
E 12.5
F 12.5
G 185
H 12.5
STOPPER STOPPER II
Max. Callpoint Size 100 x 100mm 160 x 160 mm
STOPPER II Dimensions Max. Callpoint Depth 57.5 120
(+30mm Surface)
Millimetres
A 70
B 16
C 197
D 50
E 178
F 146
G 228
H 254
Stopper II Surface Fit - STI1230
Page 36
23SeptMXCat. qxd 11/10/02 11:44 pm Page 37
STOPPER II
STOPPERIIis constructed as the STOPPER from Product Code
tough injection moulded polycarbonate. 515.001.034
Physically larger than the STOPPER the STI1230 Surface fit STOPPERII
STOPPER II extends the number of products to
which these tough multi-purpose covers can
protect.
It consists of a strong tamper-proof clear
polycarbonate cover and frame that fits easily
over such products as break glass callpoints. The
STOPPER II can also be fitted with an integral
battery powered sounder which activates if the
cover is lifted.
The STOPPER II is suitable for callpoints up to
160mm square like the DIN820/830 and CP830.
Callpoint Ancillaries
Page 37
23SeptMXCat. qxd 11/10/02 11:44 pm Page 38
Page 40
23SeptMXCat. qxd 11/10/02 11:44 pm Page 41
Page 41
23SeptMXCat. qxd 11/10/02 11:44 pm Page 42
MX Ancillary Housings
MX Ancillary Housings
A variety of ancillary housings are available to fit ancillary housings. VdS certification is with the cover.
the 800 Series MX ancillaries. Zettler ancillary box and ancillary housings. The All options allow the ancillary to be programmed
The standard sized modules are mechanically M520 double gang cover provides external and tested when the cover is removed.
compatible with all options. LPCB approvals are access for the MX SERVICE TOOL to plug into
with the M800 double gang cover plate or the ancillary module which is mounted in the
Page 42
23SeptMXCat. qxd 11/10/02 11:44 pm Page 43
Page 43
23SeptMXCat. qxd 11/10/02 11:44 pm Page 44
MX CONSYS
MX CONSYS is a powerful Windows 95 and 98 It also supports automatic data transfer to MX
compatible programming tool which provides full GRAPH, graphical mimic and alarm management
system programming functions and project systems. MX CONSYS is available under
configuration and issue control. MX CONSYS is document control from authorised personnel in
used on MINERVA MX, T2000, ZETTLER EXPERT the Tyco businesses.
and AUTOCALL MX panels. Product Codes
Features UK EUROPE
. Windows based 557.203.001
. Programs the system across multiple sub- MXCONSYS Dongle and license (parallel port)
panels 557.202.118 542.011
. Downloads to the system from one point MXCONSYS Download lead
. Supports remote dial in capability 557.203.003
. Provides software download as well as MXCONSYS Dongle and license (USB)
configuration download
. Dongle protected
. Provides full project configuration printouts
MX REMOTE
MX REMOTE is a Windows based software tool Product Codes
for remote service and support and MX detection 557.203.002
panels. MX REMOTE provides a full function fire MXRemote dongle and license (parallel)
panel repeater running on a PC either locally or 557.203.004
over dial up telephone lines. Providing the MXRemote Dongle and license (USB)
operator has the correct passwords MX REMOTE 557.202.036
allows all operator, manager, service and engineer MXRemote modem (BABT)
functions available at the panel to be provided at 542.036
the PC. This allows the customer or the Tyco 24Vd.c. MX Remote Modem (EU)
service organisation to provide remote
assistance, service and limited configuration
assistance to the installation.
MX REMOTE is available as a stand-alone
software application for Tyco service operations.
Alternatively TEPG are able to provide
consultancy and assistance in implementing MX
REMOTE as an integrated part of a central station
and service centre system.
Page 44
23SeptMXCat. qxd 11/10/02 11:44 pm Page 45
MX DEMO CASE
An MX Panel, 801CH Detector, 801PH Detector,
LEDs and Switches mounted in a carry case and
pre-configured with demo software.
Product Code
557.200.901
Product Codes
517.001.224
SOLO704 Adaptor tube B - Adapts SOLO100/101 517.001.233
pole sets for TYCO detector changers and testers
CO Detector field test kit with 24 brickets for use with
517.001.230 SOLO330
517.001.255 517.001.234
SOLO100 Telescopic extension pole 1.26M to
SOLO330 Aerosol dispenser for use with all detector CO Fire Detector field test kit spare bricks (Pack of
4.5M long ranges. Connects directly to SOLO100/101 poles 24)
517.001.226
SOLO101 Extension tube 1.3M long for use with
517.001.230 telescopic extension pole
517.001.228
SOLO600 Carry all bag for detector test kit
517.001.242
SOLO720 Spare battery baton for use with SOL O
450/460 tester
517.001.243
SOLO724 Spare mains/car battery charger for
SOLO720 battery baton
517.001.264 517.001.254
SOLO461 Cordless heat detector tester kit including: 571.001.256
SOLO 610 Protective Carry/Storage Bag for Solo
SOLO460 tester, SOLO720 battery batons and Suretest Solo aerosol tester can. For use with
Detector Test Kit SOLO724 charger. (Connects directly to SOLO330 dispenser. Non-flammable, ozone and
SOLO100/101 poles). environment friendly. Approx 200 tests per can
Sales Tools
Videos & Brochures
Product Codes PSV011
PSV001 Tyco MX Technology - Dutch PAL format
Carbon Monoxide Low Profile detector - English PSV012
PALformat Tyco MX Technology - Spanish PAL format
PSV008 PSV013
Tyco MX Technology - English PALformat Tyco MX Technology - Spanish NTSC format
PSV009 PBMX01
Tyco MX Technology - English NTSCformat Tyco MX Technology Brochure - English version
PSV010 PBMX01E
Tyco MX Technology - German PAL format Tyco MX Technology Brochure - Spanish version
Page 45
23SeptMXCat. qxd 11/10/02 11:44 pm Page 46
Page 46
23SeptMXCat. qxd 11/10/02 11:44 pm Page 47
Page 47
MXcatCOVandback.QXD 11/10/02 11:51 pm Page 2
Whos Where?
Product Management Sales Order Processing (UK) Distribution Centre (UK)
Sunbury +44 (0) 1932 743327 Walthamstow +44 (0) 208 919 4000 Letchworth +44 (0) 1462 667 700
tepghelp@tycoint.com