0 évaluation0% ont trouvé ce document utile (0 vote)
304 vues1 page
This document is from the ASHRAE duct fitting database and contains information about a smooth radius elbow without vanes. It lists the inputs of width, height, radius ratio, angle, flow rate, and density. The outputs are the calculated velocity, velocity pressure, loss coefficient, and pressure loss for an elbow with a width of 200mm, height of 200mm, radius ratio of 1.5, angle of 90 degrees, flow rate of 100 L/s, and density of 1.238 kg/m^3.
This document is from the ASHRAE duct fitting database and contains information about a smooth radius elbow without vanes. It lists the inputs of width, height, radius ratio, angle, flow rate, and density. The outputs are the calculated velocity, velocity pressure, loss coefficient, and pressure loss for an elbow with a width of 200mm, height of 200mm, radius ratio of 1.5, angle of 90 degrees, flow rate of 100 L/s, and density of 1.238 kg/m^3.
This document is from the ASHRAE duct fitting database and contains information about a smooth radius elbow without vanes. It lists the inputs of width, height, radius ratio, angle, flow rate, and density. The outputs are the calculated velocity, velocity pressure, loss coefficient, and pressure loss for an elbow with a width of 200mm, height of 200mm, radius ratio of 1.5, angle of 90 degrees, flow rate of 100 L/s, and density of 1.238 kg/m^3.
Fax: Version # 6. 00.04 Tuesday, November 15, 2016
(CR3-1) Elbow, Smooth Radius without Vanes
(Idelchik 1986, Diagram 6-1)
INPUTS OUTPUTS
Width (W, mm) 200 Velocity (Vo, m/s) 2.5
Height (H, mm) 200 Vel Pres at Vo (Pv, Pa) 4 Radius Ratio (r/W) 1.5 Loss Coefficient (Co) 0.17 Angle (Theta, deg.) 90 Pressure Loss (Pa) 1 Flow Rate (Q, L/s) 100 Density (kg/m^3) 1.238