Académique Documents
Professionnel Documents
Culture Documents
1 POS System
Z-POS Series
e-Manual
No part of this manual can be used or reproduced without the prior written permission of the publisher.
Contents Help Print Exit Copyright2013 OKPOS, All rights reserved.
HOME
System Introduction
System Introduction Preview
Preview This manual is designed for the safe and convenient use of the system and includes technical information such assembly,
System Installation Contents of this manual may vary dependent on model type.
System On/Off Recommend to use of standard parts in this product. Full operation procedure and precautions familiarization advised prior to use.
Touch Screen
Recovery and Backup Class-A digital device
Dual Monitor (option) A digital device that is marketed for use in a commercial, industrial or business environment, exclusive of a device which is
MSR (option) marketed for use by the general public or is intended to be used in the home.
Assembly/Disassembly
Stand Removal Features and Specification
Cable Cover Removal
Rear Cover Removal Features
Main Press Removal
Internal Configuration Stable System Fan free system with providing low heat stability
HDD Disk Replacement
Smart Structure Easy and smart to use with fingertip screws for assembly and disassembly
Appendix Easy Installation Top I/O panel sited for simple installation
Main Board Configuration
Pin Assignment Various Option Leading and satisfactory options such as 9.7 inch dual monitor, frame touch
ITEMS SPECIFICATION
System Introduction CPU INTEL ATOM D2550 1.86GHz (Dual Core) + NM10
Preview
SYSTEM MEMORY DDR3 SODIMM 2GB (up to 4GB, 2 slots)
Features and Specification
HDD 2.5" SATAII 320GB
Parts Description
LCD 15" TFT-LCD, LVDS, 1024x768
DISPLAY
System Installation TOUCH 15-inch 5-WIRE, RESISTIVE TOUCH
System On/Off SERIAL 4 x RS-232C (3 x DSUB-9P, 1 x RJ45)
Touch Screen USB 6 (4 x Rear, 2 x Side)
Recovery and Backup INTERFACE
PS/2 2 (1 x MOUSE, 1 x KEYBOARD)
Dual Monitor (option)
MSR (option) VGA 1
Internal Configuration
HDD Disk Replacement Frame touch (bezel free)
9.7-inch dual monitor for customer display
Appendix MSR (ISO track 2 only or ISO track 1&2&3)
Main Board Configuration
VESA wall mount bracket
Pin Assignment
DSUB-25 parallel port for receipt printer
Front Rear
System Introduction
Preview
9.7-inch
dual monitor
Features and Specification MSR
Parts Description
Touch Screen
Side USB ports
MSR (option)
Cable holder
Assembly/Disassembly
Stand Removal
Cable Cover Removal I/O port
Rear Cover Removal
Serial port (DSUB9 - COM3) RJ45 LAN port
Main Press Removal
Speaker port
Internal Configuration Serial port (DSUB9 - COM2) DVR
HDD Disk Replacement
PS/2
Appendix mouse port
Main Board Configuration
PS/2 DC-IN power
MSR (option)
1 After pushing up part of the case to rear stand, put your fingers 4 Connect device cable in the I/O ports as required.
Assembly/Disassembly on the bottom of the stand and push up part up and remove. 5 Install the cable cover.
2 Slide upward and remove it while holding down both sides of the 6 After installing the rear stand case, press PUSH button
Stand Removal
cable cover. until you hear it click in place.
Cable Cover Removal
3 Put the power adapter cable to the arrow indicated, and insert into 7 Turn on the system with the Power On button.
Rear Cover Removal
the power port.
Appendix
Main Board Configuration
Pin Assignment
A
PUSH
Stand
Rear Cover 4
1
PUSH
B
3
Contents Help Print Exit Caution Please check the direction of the adapter before inserting the power adapter cable. 4
HOME System Off
1 Close the application you are using.
2 Click the Start button and then select the Turn Off Computer.
System Introduction
3 When Shut Down screen appears, select Off to shut down the system.
Preview
Features and Specification
Parts Description
Touch Screen
System Installation If touch screen is not calibrated correctly, re-calibrate as follows:
System On/Off
1 After you click the Windows Start button, select as follows: <Program PenMount Windows Universal Driver (WHQL) Utility
Touch Screen
PenMount Control Panel>.
Recovery and Backup
2 Select PenMount 6000 RS232 in device selection tab to configure in PenMount Control Panel.
Dual Monitor (option)
Press Standard calibration button in the Coordinate calibration tab.
3
MSR (option)
Follow the on-screen instructions.
Assembly/Disassembly
Caution If a ballpoint pen is used in calibration, damage to the touch screen may occur. Do so with care, at your own discretion. We do not recommend this.
Stand Removal
Cable Cover Removal
Rear Cover Removal
Main Press Removal
Internal Configuration
HDD Disk Replacement
Appendix
Main Board Configuration
Pin Assignment
HDD Recovery
System Introduction
Preview If you encounter problems in the program or system OS, the hard disk can be recovered to the previous state or the factory state.
Features and Specification
Parts Description
Caution All system data will be deleted. We recommend you back up important data to an external hard disk before you run the recovery function on the device.
System Installation
1 Connect the keyboard and mouse to the system.
System On/Off
2 After turning on the system, follow the on-screen instructions:
Touch Screen
3 press <F11> when the F11 to WinClon ... message appears on the screen within 3 to 4 seconds (PC POST process).
Recovery and Backup
4 When WinClon appears on the screen, press <F2> key or <F3> on your keyboard or click the mouse to select Recover recent state
Dual Monitor (option)
or Recover initial state.
MSR (option)
After entering the password, press the <OK> button to continue the backup. (Password: pos)
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal
Main Press Removal
Internal Configuration
HDD Disk Replacement
Appendix
Recover initial state is restored to the factory
Main Board Configuration default state.
Recover recent state is restored to the most recent
Pin Assignment
backup of Windows.
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal
Main Press Removal
Internal Configuration
HDD Disk Replacement
Appendix
Main Board Configuration
Pin Assignment
System On/Off
Touch Screen
Recovery and Backup 1
Dual Monitor (option) 2
MSR (option) 3
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal
Main Press Removal Connecting the Cable
Internal Configuration
HDD Disk Replacement 1 Connect the VGA cable to the VGA port and the power cable to the DC-Out port.
2 Reconnect all cables and power adapter cable, and re-assemble the cable cover.
Appendix
Main Board Configuration
Pin Assignment
System Installation
System On/Off
Touch Screen
Recovery and Backup
Dual Monitor (option) Clone Mode : LVDS [clone] VGA
Extended Mode : LVDS [extend] VGA
MSR (option)
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal 6 Press Auto Adjust Screen button on the dual monitor.
Main Press Removal
Internal Configuration
HDD Disk Replacement
MSR Removal
System Installation
System On/Off 1 Loosen screws.
2 Disconnect MSR connector.
Touch Screen
1
1
2 Pull the stand in the direction of the arrow indicated.
System Installation 3 Lift up and remove the stand.
System On/Off
Touch Screen
Recovery and Backup
Dual Monitor (option) 2
1 3
MSR (option)
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal Cable Cover Removal
Main Press Removal
Pull toward and disassemble the cable cover by pressing two parts of
Internal Configuration
PUSH on the cable cover.
HDD Disk Replacement
Appendix
Main Board Configuration
Pin Assignment
Parts Description
2
System Installation
System On/Off
Touch Screen
Recovery and Backup
Dual Monitor (option)
MSR (option)
Appendix 2
1 4
Main Board Configuration
Pin Assignment
Touch cable
Assembly/Disassembly Main board
Touch power board
Stand Removal
Cable Cover Removal
I/O bracket
Rear Cover Removal
Main Press Removal
Internal Configuration
LCD bracket
HDD Disk Replacement
Appendix
Main Board Configuration
Pin Assignment
MSR (option)
3
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal 1
Main Press Removal 4
Internal Configuration
HDD Disk Replacement
Appendix
Main Board Configuration
Pin Assignment
System Installation
Buzzer
System On/Off
Parallel connector
Touch Screen
Recovery and Backup
Memory slot 1 SATA Data
Dual Monitor (option)
MSR (option) Memory slot 2 Connector
Assembly/Disassembly
Mainboard Power
Stand Removal Connector
Cable Cover Removal
Heat Sink PCI slot
Rear Cover Removal
Main Press Removal
Inverter
Battery
Internal Configuration
HDD Disk Replacement
LVDS connector
Appendix
Main Board Configuration
Pin Assignment
MSR (option) 1 4 1 4
1
Features and Specification
Parts Description
System Installation
e-Manual cover
System On/Off
Touch Screen
Recovery and Backup
Dual Monitor (option)
MSR (option)
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal
Main Press Removal
Internal Configuration
HDD Disk Replacement
Appendix
Main Board Configuration
Pin Assignment Close e-Manual.
You can print. This button will close the manual. Acrobat Reader will
remain open until closed separately or enter (CTRL)+(Q) to
You can get advice about the manual.
end both.
You can see a Table of Contents list.
System Installation
System On/Off
Touch Screen
You can move on to each
Recovery and Backup chapter by clicking them.
Dual Monitor (option) Ex) If clicking Install and Use
System, you can move on
MSR (option) to the first page of
Install and Use System.
Assembly/Disassembly
Stand Removal
Cable Cover Removal
Rear Cover Removal
Main Press Removal
Internal Configuration Move on to previous page.
Page Number.
HDD Disk Replacement
Move on to next page.