Académique Documents
Professionnel Documents
Culture Documents
093
FALL 2009
Homework 6
Instructor: Prof. K. J. Bathe Assigned: Session 14
TA: Seounghyun Ham Due: Session 16
The figure below shows a cantilever beam subjected to distributed pressure. Use ADINA to analyze the
problem and undertake a convergence study using 9-node elements. Compare the stress fields obtained
with meshes of 14, 28, 48, and 416 elements. Also evaluate your results comparing with a beam
theory result.
z
y
p0 =1108 N
m2
Plane strain, thickness 1.0
10mm
Linear analysis
y
0 =20C 2-D linear analysis
40mm
Consider the problem shown below of a fluid flowing around a cantilever beam. Assume that the
cantilever beam is a rigid body. Study the velocity and pressure distributions in the fluid domain by
increasing the number of elements, and choose appropriate meshes. Comment briefly on your results. Use
4-node elements.
Vinlet =0.0025 m
s 2-D planar analysis
=1000
kg =110-3Pas
m3
z
Slip wall
y
120mm
No slip walls
10mm
40mm
35mm
80mm
Out-flow boundary
MIT OpenCourseWare
http://ocw.mit.edu
For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.