Académique Documents
Professionnel Documents
Culture Documents
Borehole B31
Geometry GM3
Parameter MPFFile > new > select file type4. Define seam sequenceBorehole DB > edit >
create/edit > seam sequence5. Loading boreholes
Need to create variablesBorehole DB > edit > create new variable6. Fault Modeling
Need to put the faults on separate layers to manipulate them bySeam module > unfault & refault
> fault definitionHighlight fault > right click > properties > change ident to fault name > enter
>close window > start over for next faultTo import > file > import > dwg/dxf7. Unfault the
database
Give unfault database name and click un-fault boreholeSeam module > unfault & refault >
unfault borehole8. Seam ModelingSeam model > ply & splitting > set missing seam (in
borehole) > set interpolation >set missing seam (set thickness to zero).9. Compute unfaulted
gridSeam module > multi seam multivariable gridding10. Refault gridSeam module > unfault &
refault > refaulting11. Flatten gridSeam module > unfault & refault > flatten normal model12.
Model gridSeam module > seam model operation13. Merge gridPit design > create merge
model14. Bench gridPit design > create bench grids15. Pit DesignPIT DESING
17.Generate Reserves
Create Project
1. Make sure computer is rebooted and Minex opened properlyFile / project / project manager /
new / name project(You can do this before you bring up Minex)2.
PATH SETTING
Go to file systems and find the folder you put your raw data into.a. Right click on the folder / set
project directory(This links the folder with the project)
Now your total working will be saved under this particular directory
define 3D area3. Enter origin x y z (by hitting reset button)4. Extent of geologic block.5. Click
OK / cancel (Hit navigate button to move around in the planes and zoom).6. Go to window
chhatrasal
Map
boundary
Ident
map
Class
leftThen go to string / create again and draw boundary. Right click
OK.(Do not need if an AutoCad surface contour & boundary map can be imported)Display
geometry dataTo display saved geometry data, String
Plot geometry dataIn the below form, select Data Type, Group, Map, Ident, Class name and click
F