Académique Documents
Professionnel Documents
Culture Documents
htm
Home
About
Products
Services
News
Contact
Products
Tank Heads
Cones
Manways
Rolled Shells
- Photo Gallery -
Request a Quote
Tank Heads
Standard & A.S.M.E.® Tank Heads For Industry
We manufacture tank heads in many different configurations from 4" to 275" in diameter.
We form carbon, stainless, aluminum, and many other exotic materials using the finest head making equipment available today.
Sizes 6-5/8 to 192 inches in diameter. From 3/16 to 2 inches thick. Tolerances comply with ASME EG 32 (d). I.D. or O.D.
Standard and intermediate sizes 14 to 250 inches. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME requirements. ASME UG-32 (e) I.D. or O.D.
Sizes 14 to 240 inches in diameter. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME 1-4 (d). I.D. or O.D.
Standard and intermediate sizes between 14 to 248 inches in diameter. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME requirements. I.D. or O.D.
From 24 to 240 inches in diameter. From 3/16 to 1-1/8 inches thick. Tolerances comply with ASME requirements. ASME UG-32 (h). I.D. or O.D.
Sizes 14 to 260 inches in diameter. From 12 gauge to 1-3/8 inches thick. Non-ASME I.D. or O.D.
From 14 to 260 inches in diameter. From 3/16 to 1-3/8 inches thick. Non-ASME I.D. or O.D.
Sizes 14 to 300 inches in diameter. From 12 gauge to 1-1/4 inches thick. Non-ASME I.D. or O.D.
When ordering, specify most important dimensions- outer diameter, crown radius, or depth. Standard and intermediate sizes 12 to 275 inches in diameter can be readily supplies. From 12 gauge to 3 inches thick.
From 18 to 144 inches in diameter. From 12 gauge to 5/16 inches thick. Tolerances comply with ASME requirements. ASME 1-6.
1 of 1 6/27/2010 12:51 AM