Académique Documents
Professionnel Documents
Culture Documents
C101/C102 CDP
Series C101/C102 Hydraulic Dump Pump
Features
All cast iron, three-piece construction
Roller bearings, heavy duty
Pressure balanced thrust plates maintain pump efficiency at all operating speeds
Built-in relief valve protects pump and cylinder(s) from excess pressure
Built-in load holding check valve - holds bed up at various angles for a variety of applications
Choice of mountings - remote or direct PTO
Choice of valve shift controls
Two-line operation for intermittent duty cycle
Three-line operation for continuous duty cycle
General Specifications
Pump Gear GPM US Cubic Inch Horsepower Input Maximum
Width at 1000 RPM Displacement (at 2000 PSI) 1000 RPM Pressure
C101/102-20 2.000" 22.0 5.10 25.6 2500
C101/102-25 2.500" 26.6 6.38 31.0 2500
CDP*05 .750" 5.3 1.48 6.2 2500
CDP*11 1.500" 11.7 2.96 13.7 2500
CDP*16 2.000" 16.1 3.94 18.8 2500
All data based on SAE 10W oil at 150F. Minimum pump speed at pressure is 800 RPM. US Gallons displacements are theoretical. They will vary depending
on speed, pressure, and temperature.