Académique Documents
Professionnel Documents
Culture Documents
Location: 1
Designation:
Fan Data
Catalogue Code: CPD0454F
Description: Compact 2000 Series
Diameter: 450 mm
Impeller Type: Axial
Blade Material: -
Speed: 1320 RPM @50 Hz
Power, Abs: - Peak: -
Efficiency Total: - Static: -
Fan Weight: 17.0 kg
Sound Data
Spectrum (Hz): 63 125 250 500 1K 2K 4K 8K dBW dB(A) @ 3m
Inlet (dB): 74 75 72 71 70 67 64 56 80 54
Sound levels are quoted as in-duct values. dB(A) values are average spherical free-field for comparative use only.
As part of our continuous improvement processes, Fantech reserves the right to Printed 9/8/2016 9:43:53 AM
make changes in design or specification to products without notice.
Page 1 of 2
Represented by:
Doublewin Eng. & Trading PTE, Enterprise
149 x 7 To Hien Thanh Street
District 10, Hochiminh City
Vietnam
Telephone: +84 (8) 862 7870
Facsimile: +84 (8) 865 3943
E-mail: doublewin@hcm.fpt.vn
Version 5.4.0 Copyright 2010-15 Elta Group
Location: 1 Designation:
As part of our continuous improvement processes, Fantech reserves the right to Printed 9/8/2016 9:43:53 AM
make changes in design or specification to products without notice.
Page 2 of 2
Wall Window & Ceiling.qxd 4/03/2008 3:20 PM Page 12
Construction
Metal construction with a high quality polyester epoxy finish as DG - Finger Guards WSK - Backdraft shutter Speed controllers
standard. Impellers have GRP blades; nylon and aluminium Ref. J-9 Ref. K-3 Ref. L-1
Motors
Type - squirrel cage induction motor.
Sizes 710 and 800 can be fitted with motors to suit virtually any SD - Star/Delta switch VZ - Run-on timer
specification. Ref. L-9 Ref. L-10
Electricity supply - 220-240V, single or 415V, three-phase, 50Hz.
Bearings - sealed-for-life, ball.
Speed-controllable using electronic or auto-transformer.
Weatherproof to IP55.
Operating temperature range -20C to +70C. Maximum SUGGESTED SPECIFICATION
ambient when being speed-controlled is 40C.
See pages N-3/4 for details of these motors. The Compact 2000 Series of plate mounted axial fans shall be
as supplied by Fantech Pty. Ltd.
Some fans are fitted with 2-speed star/delta motors.
The axial impellers shall be of GRP and fitted with TECH-LOCK
Internal Thermal Protection bushes for easy removal and fitting.
Manual-reset protection is supplied as standard on models from Square plates shall be of metal construction with a polyester
025 to 063; they are an optional extra on the 071 and 80 models. epoxy finish.
All models shall be fully tested to BS848:Part 1, 1980 for air flow
Testing to BS848:Part 2, 1985 for noise.
Air flow tests to BS848:Part 1, 1980.
Noise tests to BS848:Part 2, 1985.
Special Features
Can be mounted at any angle.
HOW TO ORDER
A full guard is fitted as standard to 025. to 063. units only.
Guards on 071. to 080. units are an optional extra.
A flying lead with junction box and 20 flexible conduit is fitted
as standard with the 025. to 063. units only.
Derate the performance by at least 25% if air flow direction is
reverse to standard
Wiring Diagram
See page M-6/7, diagram DD 1, 4, 5, 6, 9.
Lin stem
Holes
es
100
Sy
564 HP
504 HP
D A B
454 HP
404 HP
354 HP
314 H
60
40
P
Air Flow
Full guard F fitted as standard NOTE: Flying lead fitted as standard
up to size 063. with 20 flexible conduit 20
49 52 54 57 62 63
App. App.
Model Dimensions, mm wt. vol. 10
0.2 0.4 0.6 1.0 2.0 4.0
CP.. A B C D E F G H kg m3
qV - Volume Flow, m /s 3
dB(A) @ 3m: Outlet Side =
025. 263 285 370 320 98 74 15 6 5.5 0.03
031. 325 330 430 380 95 85 10 9 10 0.04
035. 360 370 485 435 95 85 10 9 10 0.05 4 Pole
040. 410 420 540 490 95 95 12 9 15 0.07 400 24 rev/sec
045. 460 470 575 535 95 95 12 11 17 0.08
050. 510 535 655 615 145 100 15 11 24 0.13 200
Lin tem
pSF - Fan Static Pressure, Pa
714/3
056. 575 600 725 670 145 100 15 11 27 0.16
714/214/1
es
Sys
7
063. 645 670 805 750 140 105 20 11 34 0.22 100
804/1
634
071. 716 760 850 810 * 98 22 14.5 37/61 0.40
564
60
504
080. 809 860 970 910 * 133 22 14.5 0.63
804/2
50/99
454
404
354
40
314
Motor
254
73
Frame Size *E
71
D90S 222 20
68
D90L 238
42 45 49 52 54 58 62 66 78 79
D100L 304 10
D112M 346
0.2 0.4 0.6 1.0 2.0 4.0 6.0 10.0 20.0
D132M 405
Note:-
6 Pole
The selections shown here are based on fixed pitch impellers. 150 16 rev/sec
If units with different performances than those shown here are
required, refer to the SQ Series on pages A-15/17.
100
716/3
806/1
806/2
Lin tem
716/
es
Sys
60
2
pSF - Fan Static Pressure, Pa
40
716/1
636
566
506
456
406
20
63
69
44 46 51 57 60 63 67 71
10
0.4 0.6 1.0 2.0 4.0 6.0 10.0
qV - Volume Flow, m /s 3
dB(A) @ 3m: Outlet Side =