Académique Documents
Professionnel Documents
Culture Documents
DDR5
DDR4 (*)
DDR3
DDR2
x86-based server
Entry-level server
Telco system
High-end Server (*)
Oracle ILOM
Oracle Enterprise Manager Ops Center (*)
Java
Oracle VM Server for SPARC
32 cores (*)
3 threads per core
On-chip memory controllers
3 cache levels
IOU
M7 processor
eUSB
IOH (Mystic River) (*)
6. was added to Oracle ILOM to support SPPs and redundant service processor
s? Mark for Review
guest manager
extensions (*)
LDM
PDM
7. How many physical PCIe card slots are there per M7 proce
ssor? Mark for Review
4
3 (*)
2
1
Oracle ILOM
Oracle Enterprise Manager Ops Center
Java
Oracle VM Server for SPARC (*)
10. Which three statements are true about PDoms and LDoms?
Mark for Review
(Choose all correct answers)
SP chassis
interconnect chassis
switch chassis (*)
Another CMIOU chassis
SSD (*)
SAS HDD
USB flash disk
SATA HDD
Scalability links
Coherency links (*)
I/O links
memory channels
16. After completing the installation, you need to collect the system's conf
iguration. What two actions do you perform? Mark for Review
(Choose all correct answers)
/System (*)
/Storage
/SYS
/Servers (*)
/SP
Incorrect Sorry, that is not correct. Please review the SPARC M7 S
erver Hardware Support Class content and try again.
20. During the initial installation of the M7 server, you no
tice that the SP NET MGT interface is not available. Which option represents a p
ossible reason for this? Mark for Review
24. Before you can perform a firmware upgrade, you must firs
t check the keyswitch property for each host. What must it be set to for the fir
mware upgrade to work? Mark for Review
Locked
Normal (*)
Diag
Open
Unlocked
Incorrect Sorry, that is not correct. Please review the SPARC M7 S
erver Hardware Support Class content and try again.
25. Based on this output, what version of firmware is this c
ustomer running? System_fw_version = Sun System Firmware 10.1.3.e 2015/01/15 08:
53 Mark for Review
10
10.1
10.1.3.e (*)
0.370138888888889
26. You attempt to add an Oracle ILOM user account but it fails. Which optio
n represents a possible reason for the failure? Mark for Review
You need to add SSH keys to the system before creating user accounts.
You do not have the host control role enabled.
You do not have the user management role enabled. (*)
You have exceeded the maximum number of 20 user accounts.
OBP
Solaris
SP
Hypervisor (*)
29. You need to set auto-boot? To false for the test domain
that you just created. Which command do you run? Mark for Review
SPARE_SP
SP0 (*)
SLAVE_SP
SP1 (*)
ACTIVE_SP (*)
33. You are traveling to the customer's site with a new repl
acement part. What should you have with you to help prevent electrostatic discha
rge (ESD) from damaging the new part? Mark for Review
screwdriver
antistatic wrist strap (*)
torque wrence
steel-toe shoes
/opt/SUNWexplo/bin/explorer -g (*)
set /SP/diag/snapshot dataset=normal
SPset /SP/logs/event/list
/opt/SUNWexplo/bin/explorer/collect >file
fmadm errors
fmadm faulty (*)
fma status
fma errors
display /SP/logs/console/history
show /HOSTx/console/history (*)
show /SP/logs/console/history
display /HOSTx/console/history
41. Which component requires the CMIOU chassis to be powered down before it
can be replaced? Mark for Review
Fan module
interconnect cable (*)
Power Supply
SP
SP
interconnect cable
CMIOU
IOH (*)
PSU Backplane
PCIe board (*)
interconnect cable
CMIOU
ftps
Oracle Configuration Manager
All the options listed can be used (*)
Diagnostic Assistant
47. Which type of Oracle ILOM log should you display to view
user logins/logouts, configuration changes and password changes? Mark fo
r Review
event logs
audit logs (*)
bootup logs
diagnostic logs
49. Where within the Oracle ILOM BUI do you set remote loggi
ng? Mark for Review
50. Which tool, which comes in the STB, can be used to colle
ct all system status and error information and sent to remote server? Mark fo
r Review
51. How do you display the serial number on a SPARC M7 system? Mark fo
r Review
52. Which Oracle ILOM command displays the log audit list?
Mark for Review
RELP
SMTP
POP3
syslog (*)
54. Which Oracle ILOM BUI page is used to manage event logs?
Mark for Review
fma replaced
fmadm replaced (*)
fma repaired
fmadm repaired
56. Put in CMIOU Chassis Front Components image (slide 37, les 2) What is #
2 pointing to on the front of the CMIOU chassis? Mark for Review
SPARC
DIMM
Mystic River (*)
Coronado
external interconnects
SP
front indicator panel
power supplies (*)
24
16
32 (*)
8
power-on target_name
set /System/HOST power_on=true
set /System/target_name power_on=true
set /System/target_name action=return_to_service (*)
Save the SP configuration using the Oracle ILOM backup utility. (*)
Shut down all of the Pdoms.
Reboot the system.
Power down the server.
CMIOU8-CMIOU11
CMIOU4-CMIOU7 (*)
CMIOU0 - CMIOU3
CMIOU12-CMIOU15
69. You are at the customer site with a replacement fan modu
le. What three things do you need to do when removing the faulty fan module from
the CMIOU chassis? Mark for Review
(3) Points
(Choose all correct answers)
Push the green button on the handle of the fan module. (*)
Determine which fan module requires service by looking at the fan module
LEDs. (*)
Use a grounding strap to protect the fan module from ESD damage. (*)
Pull down on the green lever of the fan module.
70. What is the switch chassis used for? Mark for Review
71. Which of the following is NOT one of the rules for preventing ESD damage
? Mark for Review
Make sure your grounding straps are not in contact with your skin. (*)
Handle electronic components only when you are properly grounded
Keep items away from electronic components
Store and transport ESD-sensitive items in static-shielding containers
True (*)
False
75. Why are ESD "soft failures" the most serious type of fai
lures? Mark for Review
3. How many physical PCIe card slots are there per M7 proce
ssor? Mark for Review
4
3 (*)
2
1
10. Which three statements are true about PDoms and LDoms?
Mark for Review (Choose all correct answers)
PDoms are defined by the interconnect cabling used (*)
Oracle VM Server for SPARC is needed to be able to create LDOms (*)
PDom is a physical domain and Ldom is a logical domain (*)
Pdom stands for Pedabyte domain
Ldoms cannot be configured as hard partitions for software licensing pur
poses
22. You want to start /HOST0 but, by accident, you hit Enter
after typing start /HOST. Which option best represents the outcome of this?
Mark for Review
The start command gives an error.
The start command gets applied to all HOSTs in the system.
The start command defaults to HOST0 if you do not specify a HOST number.
(*)
The start command lists all of the HOSTs and asks you which one you want
to start.
23. You need to set auto-boot? To false for the test domain
that you just created. Which command do you run? Mark for Review
ldm set-var auto-boot=true test
ldm set-auto-boot\?=true test
ldm set-var auto-boot\?=true test (*)
ldm set auto-boot\?=true test
25. The customer has finished running their tests on the tes
t domain and would like you to remove it. What command do you run to do that?
Mark for Review
ldm rm-domain test (*)
ldm rm-ldom test
ldm remove-domain test
ldm remove-ldom test
27. You're very familiar with ILOM on the T5-8 servers, but
notice that there are two targets that are new to you in ILOM on the SPARC M7 se
rvers? Which are they? Mark for Review
(Choose all correct answers)
/System (*)
/Storage
/SYS
/Servers (*)
/SP
28. Which command would you run to switch the ACTIVE_SP resp
onsibilities? Mark for Review
set /SP/redundancy failover=on
set /SP failover=true
set /SP/redundancy initiate_failover_action=true (*)
set SP_failover=true
29. Before you can perform a firmware upgrade, you must firs
t check the keyswitch property for each host. What must it be set to for the fir
mware upgrade to work? Mark for Review
Locked
Normal (*)
Diag
Open
Unlocked
30. You have powered-on HOST3 and want to verify its current
status. Which two commands would give you that output? Mark for Review
(Choose all correct answers)
show /Servers/Pdomains/Pdomain_1/HOST status
show /Servers/Pdomains/Pdomain_3/HOST status (*)
show status /Servers/Pdomains/Pdomain_3/HOST
show /Servers/Pdomains/Pdomain_3/HOST status_detail (*)
34. You are traveling to the customer's site with a new repl
acement part. What should you have with you to help prevent electrostatic discha
rge (ESD) from damaging the new part? Mark for Review
screwdriver
antistatic wrist strap (*)
torque wrence
steel-toe shoes
35. You are ready to run SunVTS against the SPARC M7 platfor
m. Which command do you use to verify that it is installed? Mark for Review
pkg install system/test/sunvts
pkg list sunvts
pkg list entire sunvts
pkg list system/test/sunvts (*)
36. Where is the system serial number located physically on
the M7? Mark for Review
Front of the chassis (*)
Top of the chassis
Bottom of the chassis
Rear of the chassis
38. Where within the Oracle ILOM BUI do you set remote loggi
ng? Mark for Review
User Management -> Syslog
User Management -> Alerts
Notifications ->Alerts
Notifications -> Syslog (*)
41. Which Oracle ILOM command displays the log audit list?
Mark for Review
show /SP/logs/audit/list (*)
display /SP/logs/audit/list
display audit_list
show audit_list
44. Which type of Oracle ILOM log should you display to view
user logins/logouts, configuration changes and password changes? Mark fo
r Review
bootup logs
event logs
diagnostic logs
audit logs (*)
51. Which tool, which comes in the STB, can be used to colle
ct all system status and error information and sent to remote server? Mark fo
r Review
Oracle Diagnostics
Oracle Explorer Data Collector (*)
Oracle Status Collector
Oracle System Summary
62. You are ready to power up the entire system after a perf
orming a cold FRU replacement. Which command do you run? Mark for Review
power-on /System
start /HOST all
start /System (*)
set keyswitch on
68. Which two of the following statements are true about the
Yuba ASIC? Mark for Review
(Choose all correct answers)
Is the M7 Memory Link to the DDR4 interface. (*)
Also known as the I/O controller.
Interfaces the CPUs to the switches.
Also known as the Buffer on Board (BoB). (*)
74. Why are ESD "soft failures" the most serious type of fai
lures? Mark for Review
The damage is immediate and easily detected
The damage is not immediately noticed or detected (*)
They represent 40% of all failures
They represent 60% of failures
Correct Correct