Académique Documents
Professionnel Documents
Culture Documents
5. Accept license agreement by checking I accept the license terms and click Next
6. Click on Custom (advanced) option
8. Wait until installation finishes ( during the installation process computer may reboot several
times)
9. Click OK to set Administrative password
10. Enter administrative password two times and press ENTER on keyboard
11. Click OK to acknowledge password setup
NOTE: If you intend to promote this computer as Microsoft Active Directory Domain
Controller, you should set IP address and preferred DNS server with the same address
18. Chose Internet Protokol Version 6 (TCP/IPv6) and click Properties button. For IP address
and DNS server enter converted IPv4 settings, DO NOT enter Default gateway and click OK
NOTE: Conversion of IPv4 address to IPv6 address is easy to do using this tool
http://www.subnetonline.com/pages/subnet-calculators/ipv4-to-ipv6-converter.php
27. Turn off automatic updates , and turn on Give me recommended updates the same way I
receive important updates and click OK
28. In section Windows Error Reporting click Change setting
29. Chose option I dont want to participate, and dont ask me again and click OK
30. Click Close
38. In Server Manager console turn on checkbox Do not show me this console at logon, and
then in section Security information click Configure IE ESC link
39. Set both parameters to Off and click OK
40. Close Server Manager console and reboot server
41. After reboot logon to server using local administrative credentials
42. Click Start and enter dcpromo in search field, and press ENTER
44. At this screen chose Use advanced mode installation option and click Next
57. Click Start and enter dnsmgmt.msc in search field, press ENTER
58. In DNS Manager console chose Advanced option from View dropdown menu
60. On Interfaces tab turn off IPv6 adapters and leave only IPv4 address
61. On Forwarders tab click Edit
62. Enter IP addresses of DNS servers that are able to resolve Internet names (e.g.
DC1.dms.local and DC2.dms.local) and click OK twice
63. Right click Reverse Lookup Zones section and chose New Zone... option
72. Enter domain name of any other zone and IP addresses of their domain controllers, turn on
Store this conditional Forwarder in Active Directory, and replicate it as follows, and then
click OK
73. Repeat last two steps for all other zones
75. In lower right corner click on two arrows symbol and chose Customize
76. Turn on checkbox Always show all icons and notifications on the taskbar and click OK
77. Pressa WIN+Pause button and then click on Change Product Key
78. Enter Product Key and click Next
79. Accept activation by clicking OK and close all open windows