Step 1: Backup P_REGPAR.DAT C:\Server\ to E:\Setup\
And Edit the P_REGPAR.DAT CTND1:081C081C081C081C081C000A000A000A000A000A Where 081C C need to replace with J as below. CTND1:081J081J081J081J081J000A000A000A000A000A Enter the below entry on last. VERI0:0000000000000000000000000000000000000000 Copy the New P_REGMOD.DAT from \NCR EFT\gd90\ to NCR Server c:\Server and do run Support menu. And do EOD. Step 2: Copy the folder NOV_11_2015_AUH_EFT on POS terminal Desktop. Install .net version dotnetfx 2.0.exe followed by dotnetfx35.exe, dotNetFx40_Full_x86_x64.exe and vcredist_x86.exe. Each installation POS has to be restart. Step 3: Install the ECR Setup from \NBAD DLL\Setup\ ECR Setup.msi Step 4: Copy the content in the folder \NCR EFT to c:\ tmp\ Copy the Current P_REGPAR.DAT from the Server And run the Install.bat. Step 5: Need to register the ECR.dll on c:\windows\system32\ with .net. c:\Windows\Microsoft.net\Framework\ v2.0.50727.3053\RegAsm.exe The ECR.DLL must be registered with RegAsm found into the V2.0 directory of the .net framework. Look at the image below: a snapshot of the successfully registration of ECR.DLL on V2.0 framework on your system preceded by the failed registration with the V4.0 framework. Step 6: Add ecrobject.jar to the path in environment variable. System PropertyAdvancedEnvironment Variables TAB.
Once you click the Environment Variables TAB, under System
variables. Select Class path and Edit. And enter the location of ecrobcet.jar on last entry ;C:\Program Files\JavaSoft\jre\lib\ext\EcrObject.jar C:\Program Files\NCR\NCR JavaPOS\;C:\Program Files\NCR\NCR JavaPOS\NCRJavaPOS38.jar;C:\Program Files\NCR\NCR JavaPOS\jpos1102.jar;C:\Program Files\NCR\Retail\NCRRetailCommon.jar;;C:\Program Files\NCR\NCR JavaPOS\NCRJavaPOSClasses.jar;C:\Program Files\NCR\NCR JavaPOS\jpos191.jar;C:\Program Files\NCR\RSM\RSMJavaPOSUtils.jar;;C:\Program Files\NCR\NCR JavaPOS\xerces.jar;C:\Program Files\NCR\NCR JavaPOS\jpos191.jar;C:\Program Files\JavaSoft\jre\lib\ext\EcrObject.jar
Step 7: Run the
ECRSimulator.exe from \NBAD DLL. Mention the port # and time delay as mention below.
Once the test is successful, copy the Settings.xml to
c:\windows\system32\
Step 8: Start the POS program and check the changes has been applied by doing and Credit card transactions.