ye
qaQAB Emultech Pvt LtdPolymeric cing ids for water based systems are the core of our
productrange. Wemanufacture range of polymeric lids in emulsion
and powder form under the brand nameof ADDRILL™
Products are based on Partially Hydrolysed Polyacrylamide (PHPA),
polyamines, ply DADMAC (Poydiallyldimetty| ammonium chloride),
Polyacrylate to enumerate the important ones, Products are designed
by deliberate combination of various monomers to deliver the
optimum results desredinthe dling operations.
In addition, we have a range of products for dling operations
including Enhanced Oil Recover Polym, PugPolyme, Water Shut
Off Polymers, PU based Cementing Systems, Driling Foam , Loss
Grulaton Products and products based on organic polymers &
inorganic chemical formulations
(Our products have application nthe following drilingprocesses-
+ Oilfield ding
+ Geothermal Dring
+ Water Welling
Horizontal Directional Dring (HDD)
Mineral Exploration &CoreDriling
Diamond Core ring
Well Operation & Completion
Reverse Circulation Dring
Rotary Mud Dring
AirCoreDriling
Piling Tunneling
BlastHole Dring
MAJOR PRODUCTS:
ADDRILLEA -PHPA based driling uid inemalsion frm
[ADDRILLPA-PHPA based dling uidinpowderform
ADDRILLPAR-Core riling viscosifier
ADDRILLPAB -Ultrahigh viscosity dilng uid foroose formations
ADDCORE NP - 5
combination
iality mud system of natural polymer
[ADDRILL BA - Performance enhancer addi
systems
F Bentonite mud
ADDRILL EA (HS) - Terpoiymer in emulsion form for better and
enduring mud viscosity.
ADDPLUG -Cross linked hydrophilic polymer which enables plug
formationinthezanesoflost circulation
ADDFOAM: High perfrmanc
foam ding
Ailing foam for ar rotary diling and
ADDRILL PUSET A & B
Cementing System
Polyurethane Foam based Plug and
Dring Waste Water Treatment
Ding operations produce wastewater mainly constitutes the solids,
cand grease organic matter present inthe ding mud formulation
andthe dil bit cuttings. Therefore, characteristics depend on type of
dling fd beng sed inthe system - ol base or water based. The
compasition of modern dling muds is quite complex and can vary
widely, not only fom one geographical area to another, but aso in
diferentpotionofthesame well
Treatment method comprises physco-chemicalmethods, Heavy solids
are separated by mechanical equipment and supernatant i further
treated by sedimentation assisted by coagulation and flocculation. In
the process coarse and fine solid particles are removed from the
wastewater and resultant watermay be urther treated aspertequred
rormsforrecyclingandreuse
era comprehensive system of treatment after thorough study of
astewater characteristics and design of suitable system
accordingtorequirementoftheuser drilling untADSORB and CFLOC
POLYMERS FOR PETROLEUM REFINERY
Polymer for better oil & grease removal and sludge dewatering
eur il refinery pro am ADSORB & CFLOC seri
id_atvariousstageof treatment
requires large volume
seam, condensate or cooling
tain a diverse range of
reduces, moistureGatoreel PSY
ANIONIC | NONIONIC | CATIONIC | AMPHOTERIC
oS
PolyDADMAC | PolyAmines | Copolymers
Inorganic Coagulants and combination coagulants
PRODUCT ADVANTAGE
Scere ed
- Effective at very low dosage levels, resulting in reduced handling and storage costs,
- Works over a wide pH range and does not alter pH in the system.
- Larger, faster ~setling flocs are formed in gravity settling operations
= Increased filtration rates and drier cakes are produced in fitration processes.
Higher solids capture, increased clarity, and greater throughput are attained in centrifugation
PRINCIPAL USAGE
Se cea
Siege
Cooling tower & boiler water treatment
- Catification of potable and industrial raw waters, often in combination with inorganic chemical such
eens
‘ADSORB POLYMERS - WASTE WATER TREATMENT 80'4BOD and upto70 %of COD valveat the primary treatment stage.
er a range of polyelectrolyte for industrial and municipal Therefore load onthe secondary biological treatment facility reduces
ertreatment enormously tals saves the iological reactor rom any shockload
as trai load is stage
CCFLOC COAGULANTS- ADSORB FLOCCULANT s make easier tocol igherloa on th
Range comprised of products of Polyacrylamide, PolyDadmac ng and sludge comp
lamines and Copolymers of various combination for effective sold f the plant. Red
ration, coor removal and dewatering operations 7 ygen demand in the
compatible with inorganic nts. Specialty _reactorhencesavingonthe energycost.
COLORREMOVAL
INDUSTRIAL WASTEWATER TREATMENT cl
| Textile Dairy |Tanery | Ste! Plants Sugar| Pharmaceutical] productsarighly from dyeingandprintng
effluent Products may be used alone o in combination with organic
coagulantsandanioncfloculants
SLUDGE DEWATERING
density and are se ec Inmodem aclity the primary sud
Sel the basis of arte sludgeis dew
clude anionic and cationic pr
treatmentand dewateringprocess,
[MUNICIPAL SEWAGE TREATMENT inerablty of sludge solids towards bo degradation during
High al 3 anionic products for use along with coaguants transportation. Applica molecular weight nonionic of
te ru water (sewage). Use ofthese anionic or cationic product improves performance ofthe dewatering
products before the primary treatment facility at optimum dosage unit. Selection of suitable product depends again on the physico
reduces approximately 80 to 90% of Total Suspended Sls, chemicalcharactrisep
G
ve
AB Emultech Pvt Ltd
RI
«