Académique Documents
Professionnel Documents
Culture Documents
Clear Platinum-Cured
Silicone Tubing
Features/Benefits
Pharmaceutical grade
Excellent flexibility and bend radius
Minimal extractables
Tear resistant
Superior inner surface smoothness
Fully autoclavable and sterilizable
Imparts no taste or odors
Extremely stable over wide
temperature ranges
Meets all USP Class VI and European
Pharmacopeia 3.1.9 protocols
Excellent peristaltic pump life
Manufactured in Class 10000 clean room
Complete lot traceability
Wide temperature ranges from -62C
to 260C
Biocompatibility
PureFit SPT-60 is manufactured and packaged in a state-of-the-art clean room
environment with complete lot control from raw material receipt through final
product shipments. PureFit SPT-60 tubing complies fully with the requirements
of USP Class VI and EP 3.1.9 criteria and is non-toxic and non-pyroge n i c.
Pure-Fit SPT-6 0 Tubing Metric Sizes Pure-Fit SPT-60 Tubing Inventory Sizes
I.D. O.D. Wall 25 meters 10 meters I.D. O.D. Wall Part Pack Size
(mm) (mm) (mm) (inches) (inches) (inches) Number (feet)
1,0 3,0 1,0 SPT60-0103 0.03 0.16 1/16 SPT60- .030 X .160 50'
1,5 3,0 0,75 SPT60-1503 1/16 3/16 1/16 SPT60- .063 X .188 50'
2,0 4,0 1,0 SPT60-0204 1/8 1/4 1/16 SPT60- .125 X .250 50'
3/16 5/16 1/16 SPT60- .188 X .313 50'
2,0 5,5 1,75 SPT60-0255
3/16 3/8 3/32 SPT60- .188 X .375 50'
2,0 6,0 2,0 SPT60-0206
1/4 3/8 1/16 SPT60- .250 X .375 50'
3,0 5,0 1,0 SPT60-0305
1/4 7/16 3/32 SPT60- .250 X .438 50'
3,0 5,5 1,25 SPT60-0355
1/4 1/2 1/8 SPT60- .250 X .500 50'
3,0 6,0 1,5 SPT60-0306
5/16 7/16 1/16 SPT60- .313 X .438 50'
3,0 7,0 2,0 SPT60-0307
5/16 1/2 3/32 SPT60- .313 X .500 50'
4,0 6,0 1,0 SPT60-0406 3/8 9/16 3/32 SPT60- .375 X .563 50'
4,0 7,0 1,5 SPT60-0407 3/8 5/8 1/8 SPT60- .375 X .625 50'
4,0 8,0 2,0 SPT60-0408 3/8 3/4 3/16 SPT60- .375 X .750 50'
4,0 10,0 3,0 SPT60-0410 1/2 3/4 1/8 SPT60- .500 X .750 50'
5,0 7,0 1,0 SPT60-0507 1/2 7/8 3/16 SPT60- .500 X .880 50'
5,0 8,0 1,5 SPT60-0508
5,0 9,0 2,0 SPT60-0509
5,0 10,0 2,5 SPT60-0510 Pure-Fit SPT-60 Options
6,0 8,0 1,0 SPT60-0608
Custom sizes available
6,0 9,0 1,5 SPT60-0609
Bulk packaging
6,0 10,0 2,0 SPT60-0610
Additional durometers available
6,0 11,0 2,5 SPT60-0611
6,0 12,0 3,0 SPT60-0612
7,0 10,0 1,5 SPT60-0710 Typical Physical Properties
7,0 11,0 2,0 SPT60-0711
Property ASTM Value or
7,0 12,0 2,5 SPT60-0712 Method Rating
7,0 13,0 3,0 SPT60-0713
Durometer Hardness,
8,0 11,0 1,5 SPT60-0811 Shore A, 15 Sec D2240 60
8,0 12,0 2,0 SPT60-0812 Tensile Strength, psi (MPa) D412 950 (min)(6.55)
8,0 14,0 3,0 SPT60-0814 Ultimate Elongation, % D412 250 (min)
8,0 16,0 4,0 SPT60-0816 Specific Gravity D792 1.17
8,5 12,0 1,75 SPT60-8512 Tear Resistance (ppi) D624 80
9,0 13,0 2,0 SPT60-0913
Appearance Translucent
10,0 14,0 2,0 SPT60-1014
10,0 16,0 3,0 SPT60-1016
10,0 18,0 4,0 SPT60-1018 Sterilization Methods
10,0 23,0 6,5 SPT60-1023 Autoclavable Steam 60 minutes at 134C
12,0 15,5 1,75 SPT60-1215
Gas Ethylene Oxide
12,0 17,0 2,5 SPT60-1217
Radiation up to 5 Mrad
15,0 21,0 3,0 SPT60-1521
18,0 24,0 3,0 SPT60-1824
20,0 27,0 3,5 SPT60-2027
25,0 35,0 5,0 SPT60-2535
30,0 40,0 5,0 SPT60-3040
b i o p h a r mac e utical products
40,0 50,0 5,0 SPT60-4050 Come t h rough clean. SM
IMPORTANT: It is the users responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests
must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.
For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only
obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage,
direct or consequential, arising out of the use, misuse, or inability to use, this pro d u ct. THIS WARRANTY IS IN LIEU OF THE WA RRA NTIES OF MERCH A NTA BIL ITY, FITNESS FOR PARTICULAR PURPOSE,
A ND ALL OTHER WARRA NTIES, EXP RESSED OR IMPLIE D. No deviation is authorized.
Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is
given and accepted at the buyer's risk.