Académique Documents
Professionnel Documents
Culture Documents
5. The largest diameter of an imaginary sphere that could fit into the interstitial void in the
centre of cube edge of an FCC unit cell is
a) 0.309r b) 0.5r c) 0.83r d) 0.4r
where r is atomic radius
Competitive learning success India Pvt.ltd.
#20/7,2nd main road,
Opp to swasthi mandi complex,
Sheshadripuram,
Bangalore-560020
O & COQ
6. Rearrange the following quenching media in the increasing order of hardness of steel
undergoing heat treatment
1) Oil 2) Water 3) Water + NaOH 4) Brine
a) 1, 3, 2, 4 b) 2, 1, 3, 4 c) 1, 2, 3, 4 d) 4, 3, 2, 1
CDQW/OL
I. Statement for CDQW/OL questions 7 & 8
Lead crystallizes in FCC structure. Its interatomic distance may be taken as 3.499 A0.
13. Scab is a
a) sand casting defect b) machining defect
c) welding defect d) forging defect
15. Which of the following materials will require the largest size of riser, for the same casting
a) aluminium b) CI c) steel d) copper
19. Assertion : An aluminium alloy with 11% Si is used for making engine pistons by die
casting technique.
Reason : Aluminium has slow density and addition of silicon improves fluidity and
therefore its castability.
For the following questions, provide answers in terms of the following
a) Both A and R are true and R is the correct explanation of A
b) both A and R are true, but R is not the correct explanation of A
c) A is true ; but R is false
d) A is false ; low R is true
20. Assertion : The rate of flow of metal through the sprue is not a function of the cross
sectional area of sprue, runner and gate.
Reason : If the cross sectional areas of sprue, runner and gate are in the ratio of 1 : 2 : 2,
it is known as non-pressurized gating system. For the following questions, provide
answers in terms of the following