Académique Documents
Professionnel Documents
Culture Documents
Save up to 30%
on your air conditioning running costs
Improving energy efficiency is the best
short-term answer to todays energy problems
Until cleaner and sustainable sources of energy become available on a large
scale, improving the energy efficiency of todays systems is the best way to
reduce CO2 emissions and save energy.
Many existing air conditioners use old and quite inefficient technology.
Although improved technology has become available in more expensive
systems (e.g. inverter technology), the payback time of these systems is
still very long.
The AIRCOSAVER...
When switched on, typical air conditioning systems This is where the AIRCOSAVER cuts in. Its sensor-driven software algorithms
operate continuously until the room thermostat are designed to detect thermodynamic saturation and to optimize the
senses the desired temperature and turns the compressor accordingly. When overcapacity is detected, the AIRCOSAVER
system off. As the room warms up, the thermostat switches the compressor off and avoids inefficient overcooling.
switches the air conditioner back on and the cycle
is repeated. Your unit switches into saver mode. The fan keeps running and your
system makes maximum use of the stored cooling energy in the heat
Air conditioning systems are usually dimensioned exchanger. Once the stored energy is used up, the compressor can work
to cope with the extreme cooling demands of the efficiently again and is switched back on.
few hottest days of the year (plus a safety margin).
However, in most operational conditions, this The set room temperature is reached without the inefficient parts of the
maximum output is not required and the system cooling cycle. This results in significant energy savings without compromising
is oversized. So running the system continuously cooling comfort.
until the room thermostat switches it off means
that the system operates with excess capacity Since the correct point to switch the compressor varies from unit to unit
most of the time. and changes with different weather conditions, the AIRCOSAVER is
constantly adapting its settings to ensure efficient operation of your air
A typical cooling cycle with excess capacity conditioning system at all times.
looks like this:
When the cycle starts, the compressor pushes without AIRCOSAVER
Temperature
cooling energy into the heat exchanger which Thermostat senses
set room temp.
Thermostat
switches AC
acts as an energy storage. At this stage, the & switches AC system off on again
Ro
m
o
loaded. Set
Room
m
o
Te
m pe
ratu
re
Set
Room
Temp
Time
Compressor ON OFF ON OFF ON OFF ON OFF ON
UPGRADE your aircon unit now!
03/2014
Photographs of aircons and power station ( l to r): Andy Gurnett, Steve Roe, Smeallum
Instead of investing a lot of money into an expensive new air conditioning system,
there is an easy and affordable way to improve the energy efficiency of your existing
unit: Upgrade it with an AIRCOSAVER.
Design: www.cosmolog.de
The standard AIRCOSAVER does not work with chilled water systems,
evaporative cooling systems, inverter type systems or multi split systems.
A I R C O S A V E R
For more information please visit: http://www.aircosaver.com