Académique Documents
Professionnel Documents
Culture Documents
10511637
08MR07 REV 0
NOTICE: Install both parts provided in this kit. They may be different from the parts being replaced and must
be installed together to be sure of proper starter operation.
The 10-tooth starter drive and drive housing in this kit are used to replace the 9-tooth drives and housings originally
installed on certain starters. Because the drive pinions are different sizes, different starter mounting
dimensions are needed for engagement with the engine ring gear. The new housing provides the proper starter
mounting dimensions for the new drive pinion.
WARNING Be aware that only licensed Remy Inc. product and component parts should be used and the use of other parts or modifications not approved
by Remy Inc. will void any warranty concerning, but not limited to, product performance or reliability. The failure to carefully follow Installation Package
guidelines set forth above will likewise void any and all warranty, including the implied warranties of merchantability and fitness for a particular
purpose. Delco Remy is a registered trademark of General Motors Corporation, licensed to Remy Inc., Anderson, IN 46013.