Académique Documents
Professionnel Documents
Culture Documents
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comunquese con SAMSUNG WORLD WIDE
Si desea hacernos alguna pregunta o comentario en relacin con los productos de Samsung, comunquese con nuestro centro de
atencin al cliente de SAMSUNG.
LED TV
Country Customer Care Center Web Site
ARGENTINE 0800 333 3733 www.samsung.com.ar
URUGUAY 000 405 437 33 www.samsung.com
PARAGUAY 009 800 542 0001 www.samsung.com.py
BRAZIL 0800-124-421 (Demais cidades e regies) www.samsung.com.br
User Manual
4004-0000 (Capitais e grandes centros)
CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl
BOLIVIA 800-10-7260 www.samsung.com
COLOMBIA 01 8000 112 112 www.samsung.com/co
Bogot 600 12 72
COSTA RICA 0-800-507-7267 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
DOMINICA 1-800-751-2676 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
ECUADOR 1-800-10-7267 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
EL SALVADOR 800-6225 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
GUATEMALA 1-800-299-0013 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
HONDURAS 800-27919267 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
JAMAICA 1-800-234-7267 www.samsung.com
NICARAGUA 001-800-5077267 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
PANAMA 800-7267 www.samsung.com/latin (Spanish)
www.samsung.com/latin_en (English)
PERU 0-800-777-08 www.samsung.com/pe
PUERTO RICO 1-800-682-3180 www.samsung.com
E-MANUAL
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com
VENEZUELA 0-800-100-5303 www.samsung.com/ve
y The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
y Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
y Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
y Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
y Make sure to pull out the power cord from the outlet before cleaning.
y This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect
the environment. Please contact your local authorities for disposal or recycling information.
y Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
y Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
y To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
y Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply. (depending on the model)
y Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
y To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
y Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do
not touch the power cord with wet hands.
y If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
contact an authorized dealer or service center.
y Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
(especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat,
or cause the insulation to deteriorate.
y Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious
damage to your set.
y Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
y To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily
accessible at all times.
y Do not allow children to hang onto the product.
y Store the accessories (batteries, etc.) in a location safely out of the reach of children.
y Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
y Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
y To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in a small amount of water.
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the
appearance or erase the printing on the product.
y Do not expose the apparatus to dripping or splashing.
y Do not dispose of batteries in a fire.
y Do not short circuit, disassemble, or overheat the batteries.
y There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
y WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL
TIMES.
English - 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product
design and specifications may be changed without notice.
10 cm 10 cm
10 cm 10 cm 10 cm 10 cm
10 cm
English - 3
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
The items colors and shapes may vary depending on the models.
Check that there are no accessories hidden behind packing materials when you open the box.
Remote Control & Batteries (AAA x 2) Warranty Card / Regulatory Guide (Not available in some locations)
Owners Instructions Power Cord
AC/DC Adapter (UN19F4000 / UN22F5000)
English - 4
Turns the TV on and off. Display and select the available video
sources.
Displays the channel list on the screen. Displays the main on-screen menu.
NOTE
Use the remote control within 23 feet of the TV.
Bright light may affect the performance of the remote control.
Avoid using when near special fluorescent lights or neon signs.
The color and shape may vary depending on the model.
English - 5
TV Controller
Return
The image is drawn by
Remote control sensor facing the front side of
the TV.
Power Off
The product color and shape may vary depending on the model.
Exits the menu when pressing the controller more than 1 second.
When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the controller. If you
press it first, you cannot operate it to move the up/down/left/right directions.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to
decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for
example). It is best to unplug the power cord.
English - 6
Headphones connection
TV Side Panel
USB
(5V 0.5A)
USB
The rear panel may differ
depending on the model.
HDMI IN 1
(STB)
DIGITAL
AUDIO OUT
(OPTICAL) Power Input
(UN19F4000 /
HDMI IN 2 (DVI)
UN22F5000) VHF/UHF Antenna
AUDIO VIDEO
COMPONENT
/ AV IN
AIR
DC 14V
or
CABLE
ANT IN
Cable
R W Y R W R B G Power Input
(UN28F4000)
TV Rear Panel
W R Y W R R B
R
G The position of port may
differ depending on the
AUDIO OUT VIDEO OUT AUDIO OUT COMPONENT OUT model.
PR PB Y
L-AUDIO-R L-AUDIO-R
English - 7
HDMI OUT DVI OUT VIDEO OUT AUDIO OUT COMPONENT OUT AUDIO OUT
Y PB PR
L-AUDIO-R L-AUDIO-R
Y W R G
R B R W R
TV Side Panel Y W R G
R
B R W R
HDMI IN 2
(DVI)
USB
(5V 0.5A)
USB
HDMI IN 1
(STB) COMPONENT
COMPONENT
/ AV IN
IN
AUDIO OUT
VIDEO
VIDEO
VHF/UHF Antenna DIGITAL
AUDIO OUT
(OPTICAL)
Cable
ANT IN
CABLE
AUDIO
AUDIO
or
AIR
W R
TV Rear Panel
model.
Audio connection
Digital Audio System / Amplifier /
Home Theater
English - 8
NOTE
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
English - 9
Source
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver
connected to the TV.
1. Press the SOURCE button on your remote.
2. Select a desired external input source.
TV / HDMI1 / HDMI2/DVI / AV / Component
In the Source, connected inputs will be highlighted.
PC(D-Sub) input is not supported. If you want to connect PC to the TV, use HDMI2/DVI input.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV
/ Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under
Edit Name.
When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices
mode under Edit Name.
Information
You can see detailed information about the connected external device.
English - 10
You can find instructions for your TVs features in the e-Manual in your TV. To use, press the E-MANUAL button on
E-MANUAL your remote. Move the cursor using the up/down/right/left buttons to highlight a category, then a topic, and then
press the ENTERE button. The e-Manual displays the page you want to see.
You can also access it through the menu:
O MENUm Support e-Manual ENTERE
If you want to return to the e-Manual, press the E-MANUAL button on your remote.
You can not use the Try Now function if the menu is not activated.
Screen Display
Operation Buttons:
} Blue (Index): Displays index screen.
E Enter: Select a category or sub-menu.
e Exit: Exit the e-Manual.
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
Picture
Basic Features > Changing the Preset Picture Mode (1/1)
Picture Mode Standard
Contrast 95
Brightness 45
E-MANUAL Sharpness 50
Color 50
a Try Now b Home { Zoom } Index L Page e Exit Tint (G/R) G50 R50
Method 1 Method 2
1. Press the ENTERE button when a topic is displayed. Do
1. If you want to use the menu that corresponds to an
you want to execute this? appears. Select Yes, and then
e-Manual topic, press the red button to select Try Now.
press the ENTERE button. The OSD window appears.
2. To return to the e-Manual screen, press the E-MANUAL
2. To return to the e-Manual screen, press the E-MANUAL
button.
button.
English - 11
Operation Buttons:
a Red (Try Now): Displays the OSD menu that corresponds to the topic. To return to the e-Manual
screen, press the E-MANUAL button.
b Green (Home): Moves to the e-Manual home screen.
{ Yellow (Zoom): Magnifies a screen.
} Blue (Index): Displays the Index screen.
L (Page): Moves to previous or next page.
e (Exit): Exit the e-Manual.
U Move R Return
English - 12
First of all, please perform the Picture Test and confirm that your TV is properly displaying the
test image.
Poor picture go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or
signal.
If you have an analog Cable/Set top box, upgrade to a digital set top box. Use HDMI or Component
cables to deliver HD (high definition) picture quality.
The TV image does not look as Cable/Satellite subscribers: Try HD stations from the channel line up.
good as it did in the store. Air/Cable Antenna connection: Try HD stations after performing Auto program.
Many HD channels are up scaled from SD(Standard Definition) contents.
Adjust the Cable/Set top box video output resolution to 1080i or 720p.
Compression of video contents may cause picture distortion, especially in fast moving pictures such as
The picture is distorted: macroblock sports and action movies.
error, small block, dots, pixelization. Low signal level can cause picture distortion. This is not a TV problem.
Mobile phones used close to the TV (up to 3.3 ft) may cause noise in picture on analog and digital TV.
If youre using component connection, make sure the component cables are connected to the correct
Color is wrong or missing. jacks. Incorrect or loose connections may cause color problems or a blank screen.
Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
There is poor color or brightness. Adjust Energy Saving option in the TV menu (go to MENU - System - Eco Solution - Energy Saving)
Try resetting the picture to view the default picture setting. (go to MENU - Picture - Reset Picture)
There is a dotted line on the edge of If the picture size is set to Screen Fit, change it to 16:9.
the screen. Change cable/Set top box resolution.
If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component
The picture is black and white. input 1 on the TV.
When changing channels, the If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box
picture freezes or is distorted or reboots. It may take up to 20 minutes)
delayed. Set output resolution of the cable box to 1080i or 720p.
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
Sound Problem go to MENU - Support - Self Diagnosis - Sound Test
If the audio is OK, the sound problem may be caused by the source or signal.
Check the cable connections. Make sure a video cable is not connected to an audio input.
The speakers are making an For Antenna or Cable connections, check the signal information. Low signal level may cause sound
inappropriate noise. distortion.
Perform the Sound Test as explained above.
English - 13
The TV turns off automatically. Ensure the Sleep Timer is set to Off in the System menu.
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is
no signal.
There is no picture/video Check cable connections. (remove and reconnect all cables connected to the TV and external devices).
Set your external devices (Cable/Set top box, DVD, Blu-ray etc) video outputs to match the connections to
the TV input. For example, if an external devices output is HDMI, it should be connected to an HDMI input
on the TV.
Make sure your connected devices are powered on.
Be sure to select the TVs correct source by pressing the SOURCE button on the remote control.
Reboot the connected device by reconnecting the devices power cable.
The picture is distorted: macroblock, Compression of video contents may cause picture distortion, especially on fast moving pictures such as
error, small block, dots, pixelization. sports and action movies.
A low signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that
and buzzing noise from the TV the set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
speakers with Component cable
connection.
The picture will not display in full HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
screen. Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV.
Adjust picture size option on your external device or TV to full screen.
English - 14
A Mode Not Supported message Check the supported resolution of the TV and adjust the external devices output resolution accordingly.
appears. Refer to resolution settings in this manual.
Caption can not be selected in the TV menu when connected via HDMI or Component.
Caption on TV menu is greyed out.
Caption must be activated on the external device.
There is a plastic smell from the TV. This smell is normal and will dissipate over time.
The PIP menu is not available. PIP functionality is only available when you are using a HDMI or components source.
Some functions and pictures shown in this manual are available on specific models only.
You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com Support) by USB.
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English - 15
UN19F4000
7.5 X 7.5
UN22F5000 M4
UN28F4000 10 X 10
LED-TV UN32F4000 4
UN32F5000 20 X 20
UN40F5000 M8
UN46F5000
40 X 40
UN50F5000
Remove the screws in the mounting holes before you install the wall mount.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
English - 16
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm
that the screws have been firmly installed onto the wall.
You may need additional material such as an anchor depending on
the type of wall.
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back center of the TV, put the screws into the
clamps, and then fasten the screws onto the TV again.
Screws may not be supplied with the product. In this case, please
purchase the screws.
3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong string and then tie the string tightly.
NOTE
Install the TV near to the wall so that it does not fall backwards.
It is safe to connect the string so that the clamps fixed on the wall are
equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV. Wall
4 Verify all connections are properly secured. Periodically check connections
for any sign of fatigue for failure. If you have any doubt about the security of
your connections, contact a professional installer.
Cover-jack
English - 17
English - 18
Environmental
Considerations
50F to 104F (10C to 40C)
Operating Temperature
10% to 80%, non-condensing
Operating Humidity
-4F to 113F (-20C to 45C)
Storage Temperature
5% to 95%, non-condensing
Storage Humidity
Screen Size 47 cm 69 cm 80 cm 54 cm
Sound
3W x 2 5W x 2 10W x 2 3W x 2
(Output)
Dimensions (W x H x D)
Body 45.3 x 28.5 x 4.9 (cm) 64.5 x 38.9 x 4.9 (cm) 73.7 x 44.0 x 4.9 (cm) 51.3 x 32.1 x 4.3 (cm)
With stand 45.3 x 31.4 x 12.4 (cm) 64.5 x 45.7 x 19.1 (cm) 73.7 x 50.9 x 19.1 (cm) 51.3 x 36.6 x 16.9 (cm)
Weight
Without Stand 2.5 kg 4.2 kg 5.2 kg 2.6 kg
With Stand 2.6 kg 4.7 kg 5.7 kg 2.9 kg
Sound
10W x 2
(Output)
Dimensions (W x H x D)
Body 73.8 x 44.5 x 4.9 (cm) 92.8 x 55.2 x 4.9 (cm) 105.9 x 62.6 x 4.9 (cm) 113.5 x 66.8 x 4.9 (cm)
With stand 73.8 x 50.5 x 19.1 (cm) 92.8 x 61.2 x 23.5 (cm) 105.9 x 68.6 x 23.5 (cm) 113.5 x 72.7 x 23.5 (cm)
Weight
Without Stand 5.0 kg 8.0 kg 10.8 kg 13.0 kg
With Stand 5.6 kg 9.5 kg 12.3 kg 14.5 kg
English - 19
File Extention Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec
DivX 3.11/4.x/5.x/6.x AC3
AVI
LPCM
*.avi / *.mkv MKV MPEG4 SP/ASP 1920 x 1080 30 ADPCM
*.asf / *.wmv ASF
H.264 BP/MP/HP (IMA, MS)
*.mp4 / *.3gp MP4
AAC
*.vro / *.mpg 3GP Motion JPEG 640 x 480 8 HE-AAC
*.mpeg / *.ts MOV
Window Media Video v9 6~30 WMA
*.tp / *.trp FLV
DD+
*.mov / *.flv VRO MPEG2 MPEG
*.vob / *.svi VOB 30
1920 x 1080 (MP3)
*.divx PS
MPEG1 DTS (Core)
TS
G.711(A-Law, -Law)
*.webm WebM VP8 20 Vorbis
Other Restrictions
Video content will not play, or not play correctly, if there is an error in the content or the container.
Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table.
If the Index Table is in error, the Seek (Jump) function is not supported.
Some USB/digital camera devices may not be compatible with the player.
The menu can be displayed late if the video is over 10Mbps(bit rate).
Video decoder Audio decoder
Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.)
frame rate : WMA 10 Pro supports up to 5.1 channel and M2 profile.
- Below 1280 x 720: 60 frame max WMA lossless audio is not supported.
- Above 1280 x 720: 30 frame max Vorbis supports up to 2ch.
VC1 AP L4 is not supported. DD+ supports up to 5.1 channel.
GMC 2 or higher is not supported.
English - 20
PRECAUCIN: PARA REDUCIR EL RIESGO DE DESCARGA ELCTRICA, Este smbolo le alerta de que con este producto se
NO RETIRE LA CUBIERTA (NI LA PARTE POSTERIOR). EN EL INTERIOR incluye documentacin importante relativa
NO HAY PIEZAS QUE PUEDA REPARAR EL USUARIO. DEJE LAS al funcionamiento y mantenimiento.
REPARACIONES EN MANOS DE PERSONAL CUALIFICADO.
Las ranuras y las aberturas en el gabinete y en la parte posterior o inferior son para conseguir la ventilacin necesaria. Para asegurar un
funcionamiento fiable de este aparato y para protegerlo del sobrecalentamiento, nunca se deben bloquear ni cubrir estas ranuras y abertu-
ras.
- No cubra las ranuras ni las aberturas con un pao ni otros materiales.
- No bloquee las ranuras ni las aberturas colocando este aparato sobre una cama, un sof, una estera ni otra superficie similar.
- No coloque este aparato en un espacio cerrado, como una estantera o un gabinete empotrado, a menos que se proporcione una venti-
lacin suficiente.
No coloque este aparato cerca o sobre un radiador o un restato, ni en un lugar expuesto a la luz directa del sol.
No coloque recipientes con agua sobre este aparato (jarrones, etc.), ya que podra representar riesgo de incendio o descarga elctrica.
No exponga este aparato a la lluvia ni lo coloque cerca del agua (junto a una baera, una pileta de cocina, un lavadero, en un stano hm-
edo ni cerca de una piscina, etc.). Si el aparato se moja accidentalmente, desenchfelo y contacte inmediatamente con un distribuidor
autorizado.
Asegrese de desconectar el cable de alimentacin antes de la limpieza.
Este aparato usa pilas. En su comunidad puede haber normas que requieran desechar esta pilas adecuadamente segn criterios medioambi-
entales. Contacte con las autoridades locales para obtener informacin sobre la eliminacin o el reciclaje de las pilas.
No sobrecargue las tomas de la pared, los cables de extensin ni los adaptadores por encima de su capacidad, ya que esto puede provocar
un incendio o una descarga elctrica.
Los cables de alimentacin deben colocarse de forma que no puedan pisarse ni quedar atrapados por objetos encima o contra ellos,
poniendo especial atencin en el extremo del enchufe, los adaptadores y el punto en el que salen del aparato.
Para proteger este aparato durante una tormenta elctrica o cuando lo deje sin vigilancia o sin utilizar durante largos periodos, desconc-
telo de la toma de la pared y desconecte la antena o el sistema de cable. Esto evitar que el equipo se dae por rayos o sobretensiones de
la lnea elctrica.
Antes de conectar el cable de alimentacin de CA a la toma del adaptador de CC, asegrese de que la designacin del voltaje del adapta-
dor de CC corresponde a la red elctrica local.
No inserte ningn objeto metlico en las aberturas del aparato. Se podra producir una descarga elctrica.
Para evitar descargas elctricas, no toque el interior de este aparato. Slo un tcnico cualificado debe abrir este aparato.
Verifique que el cable de alimentacin est firmemente insertado en el enchufe. Cuando desenchufe el cable de alimentacin, sujtelo por
el enchufe y tire de ste para sacarlo de la toma. No toque el cable de alimentacin con las manos hmedas.
Si este aparato no funciona normalmente - en especial si emite sonidos extraos o desprende olores desde el interior-
- desconctelo inmediatamente y contacte con un distribuidor o un centro de servicio tcnico autorizado.
Desenchufe el televisor de la toma de corriente si no se va a usarlo o si va ausentarse durante un tiempo prolongado (en especial si quedan
en la casa nios, ancianos o personas discapacitadas sin compaa).
- El polvo acumulado puede causar una descarga elctrica, una fuga elctrica o un incendio ya que el cable de alimentacin puede generar
chispas y calor elevado o que se deteriore el aislamiento.
Contacte con un centro de servicio tcnico autorizado cuando instale el aparato en un lugar expuesto a gran cantidad de polvo, temperatu-
ras extremas, alto nivel de humedad y productos qumicos, y en lugares donde vaya a funcionar las 24 horas del da, como aeropuertos,
estaciones de ferrocarril, etc. Si no lo hace puede provocar graves daos en el aparato.
Use solo una toma y un receptculo correctamente conectados a tierra.
- Una conexin a tierra inadecuada puede ocasionar descargas elctricas o daos en el equipo. (Slo equipo de Clase I.)
Para desconectar el aparato de la corriente, debe desenchufar el cable de la toma principal, por lo que el enchufe principal debe estar fcil-
mente accesible.
No permita que los nios se cuelguen del producto.
Guarde los accesorios (pilas, etc.) en un lugar seguro fuera del alcance de los nios.
No instale el producto en un lugar inestable, como una estantera insegura, un suelo inclinado o un lugar expuesto a vibraciones.
No deje caer el producto y evite que reciba impactos. Si el producto se daa, desconecte el cable de alimentacin y comunquese con un
centro de servicio tcnico.
Para limpiar el producto, desconecte el cable de alimentacin de la toma y limpie el producto con un pao suave humedecido con una
pequea cantidad de agua. No use qumicos como cera, benceno, alcohol, solventes, insecticidas, desodorante de ambientes, lubricante o
detergentes. Podra daar el aspecto o borrar las estampaciones del producto.
El aparato no debe estar expuesto a goteos o salpicaduras.
No arroje las pilas al fuego.
No cortocircuite, desmonte ni sobrecaliente las pilas.
Si la pila no se reemplaza correctamente existe el riesgo de explosin. Reemplcela slo con una del mismo tipo o
equivalente.
ADVERTENCIA - PARA IMPEDIR QUE EL FUEGO SE PROPAGUE, MANTENGA LAS VELAS U OTRAS LLAMAS
EXPUESTAS LEJOS DE ESTE PRODUCTO.
- Espaol -
Espaol - 2
Las figuras e ilustraciones de este Manual del usuario se ofrecen como referencia solamente y pueden ser distintas del aspecto real del
producto. El diseo y las especificaciones del producto estn sujetos a cambios sin previo aviso.
10 centmertos 10 centmertos
10 centmertos
Espaol - 3
Accesorios
Asegrese de que los siguientes elementos estn incluidos con su televisor. Si falta algn elemento, comunquese con su
distribuidor.
Los colores y las formas pueden variar segn el modelo.
Verifique que no haya ningn accesorio oculto detrs o debajo de los materiales de embalaje cuando abra la caja.
Control remoto y pilas (AAA x 2) Tarjeta de garanta / Gua regulatoria (No disponible en algunos lugares)
Manual del usuario Cable de alimentacin
Adaptador CA/CC (UN19F4000 / UN22F5000)
Espaol - 4
NOTA
Utilice el control remoto a menos de 7 metros (23 pies) del
televisor.
La luz brillante puede afectar el funcionamiento del
control remoto. Evite utilizarlo cuando est cerca de luces
fluorescentes especiales o carteles de nen.
El color y la forma pueden variar segn el modelo.
Espaol - 5
Controlador del
Regresar
televisor
Sensor de control remoto Imagen vista desde el
frontal del televisor.
Apagar
Modo suspensin
Su televisor ingresa en el modo Suspensin cuando lo apaga y contina consumiendo una pequea cantidad de energa elctrica. Por
motivos de seguridad y para disminuir el consumo de energa, no deje su televisor en modo Suspensin durante perodos prolongados
(cuando se va de vacaciones, por ejemplo). Es mejor desenchufar el cable de alimentacin.
Espaol - 6
Conexin de auriculares
USB
(5V 0.5A)
COMPONENT
/ AV IN
AIR
DC 14V
o
CABLE
ANT IN
Cable
R W Y R W R B G Entrada de
alimentacin
(UN28F4000)
Panel posterior del TV
W R Y W R R B
R
G La posicin del puerto
puede variar segn el
AUDIO OUT VIDEO OUT AUDIO OUT COMPONENT OUT modelo.
PR PB Y
L-AUDIO-R L-AUDIO-R
Espaol - 7
HDMI OUT DVI OUT VIDEO OUT AUDIO OUT COMPONENT OUT AUDIO OUT
Y PB PR
L-AUDIO-R L-AUDIO-R
Y W R G
R B R W R
HDMI IN 2
(DVI)
USB
(5V 0.5A)
USB
HDMI IN 1
(STB) COMPONENT
COMPONENT
/ AV IN
IN
AUDIO OUT
VIDEO
VIDEO
Antena VHF/UHF DIGITAL
AUDIO OUT
(OPTICAL)
Cable
ANT IN
CABLE
AUDIO
AUDIO
o
AIR
W R
Panel posterior del TV
modelo.
Conexin de audio
Sistema de audio digital / Amplificador
/ Home Theater
Espaol - 8
NOTA
No se admite el modo entrelazado.
El aparato puede funcionar incorrectamente si se selecciona un formato de video que no sea estndar.
Espaol - 9
Origen
Se utiliza para seleccionar el televisor u otra fuente de entrada externa como DVD / reproductores de Blu-ray / receptor
de cable / receptor de satlite STB conectado al televisor.
1. Pulse el botn SOURCE de su control remoto.
2. Seleccione la fuente de entrada externa que desee.
TV / HDMI1 / HDMI2/DVI / AV / Componente
En Origen, se resaltan las entradas conectadas.
No se admite la entrada PC(D-Sub). Si desea conectar la PC al televisor, use la entrada HDMI2/DVI.
Cmo usar la funcin Editar Nombre
En Origen, pulse el botn TOOLS, y luego podr configurar el nombre de las fuentes de entrada externas que desee.
Vdeo / DVD / Cable STB / Satlite STB / PVR STB / Receptor AV / Juego / Filmadora / PC / DVI PC / Dispositivos DVI / TV
/ IPTV / Blu-ray / HD DVD / DMA: D un nombre al dispositivo conectado a las tomas de entrada para facilitar su eleccin de la
fuente de entrada.
Cuando conecta una PC al puerto HDMI IN 2(DVI) con un cable HDMI, debe configurar el televisor en modo PC en Editar
Nombre.
Cuando conecta una PC al puerto HDMI IN 2(DVI) con un cable HDMI a DVI, debe configurar el televisor en modo DVI PC
en Editar Nombre.
Cuando conecta dispositivos AV al puerto HDMI IN 2(DVI) con un cable HDMI a DVI, debe configurar el televisor en modo
Dispositivos DVI en Editar Nombre.
Informacin
Puede ver informacin detallada acerca del dispositivo externo conectado.
Espaol - 10
Puede encontrar instrucciones para las funciones de su televisor en el e-Manual de su televisor. Para usarlo, pulse
E-MANUAL el botn E-MANUAL de su control remoto. Mueva el cursor con los botones arriba/abajo/derecha/izquierda para
resaltar una categora, luego un tema y pulse el botn ENTERE. Se muestra la pgina del e-Manual que desea
ver.
Tambin puede acceder a travs del men:
Botones de operacin:
} Azul (ndice): Mostrar la pantalla del ndice.
E Entrar: Seleccionar una categora o submen.
e Salir: Sale del e-Manual.
Cmo conmutar entre un tema del e-Manual y los mens de la OSD correspondientes.
Imagen
Funciones bsicas > Cambio del modo preestablecido de la imagen (1/1)
Modo de Imagen Normal
Luz de fondo 10
Int. Ahora
Contraste 95
Brillo 45
E-MANUAL Definicin 50
Color 50
a Int. Ahora b Inicio { Zoom } ndice L Pgina e Salir Tinte (V/R) G50 R50
Mtodo 1 Mtodo 2
1. Pulse el botn ENTERE cuando se muestre un tema.
1. Si desea usar el men que corresponde a un tema del Aparecer el mensaje Desea ejecutar esto?. Seleccione
e-Manual, pulse el botn rojo para seleccionar Int. Ahora. S y luego pulse nuevamente el botn ENTERE.
2. Para volver a la pantalla del e-Manual, pulse el botn Aparecer la ventana de la OSD.
E-MANUAL. 2. Para volver a la pantalla del e-Manual, pulse el botn
E-MANUAL.
Espaol - 11
Botones de operacin:
a Rojo (Int. Ahora): Muestra el men OSD que corresponde al tema. Para volver a la pantalla del
e-Manual, pulse el botn E-MANUAL.
b Verde (Inicio): Pasa a la pantalla de inicio del e-Manual.
{ Amarillo (Zoom): Ampla la pantalla.
} Azul (ndice): Muestra la pantalla del ndice.
L (Pgina): Pasa a la pgina anterior o siguiente.
e (Salir): Sale del e-Manual.
U Mover R Regresar
Espaol - 12
En primer lugar, realice la Prueba de imagen para confirmar que el televisor muestre
correctamente la imagen de prueba.
Imagen deficiente Vaya a MENU - Soporte tcnico - Autodiagnstico - Prueba de imagen
Si la imagen de la prueba se muestra correctamente, la imagen deficiente puede provenir de
la fuente o de la seal.
Si tiene un receptor de cable/satlite analgico, cambie a un receptor digital superior. Utilice cables HDMI
o de componentes para conseguir la mejor calidad de imagen de alta definicin (HD).
Suscriptores de cable/satlite: Pruebe con las emisoras de alta definicin (HD) en la oferta de canales.
La imagen del televisor no se ve tan Conexin de antena de aire/cable: Pruebe las emisoras de alta definicin (HD) despus de realizar la
bien como en la tienda. programacin automtica.
Muchos canales de alta definicin (HD) mejoran los contenidos SD (definicin estndar).
Ajuste la resolucin de la salida de video del receptor de cable o satlite en 1080i o 720p.
La compresin de los contenidos de video puede causar imgenes distorsionadas especialmente en las
La imagen se ve distorsionada: error escenas de movimiento rpido, como en los deportes y las pelculas de accin.
de macrobloques, microbloques, El bajo nivel de seal puede causar distorsin de la imagen. Este no es un problema del televisor.
puntos, pixelizacin. Los telfonos mviles utilizados cerca del televisor (hasta 0,9 mts) pueden causar ruido en la imagen en un
televisor analgico y digital.
Si utiliza una conexin de componentes, compruebe que los cables de los componentes estn
El color es de mala calidad o falta. conectados en las entradas correctas. Las conexiones incorrectas o sueltas pueden originar problemas o
que la pantalla se quede en blanco.
Ajuste las opciones de Imagen en el men del televisor. (vaya a Modo de Imagen / Color / Brillo /
Definicin)
Ajuste la opcin Ahorro de energa en el men del televisor (vaya a MENU - Sistema - Solucin Eco -
El color o el brillo es de mala calidad. Ahorro de energa)
Intente reiniciar la imagen para ver la configuracin de imagen predeterminada. (vaya a MENU - Imagen
- Restablezca imagen)
Hay una lnea de puntos en el borde Si el tamao de la imagen est establecido en Ajuste pantalla, cmbielo a 16:9.
de la pantalla. Cambie la resolucin del receptor de cable/satlite.
La imagen se ve slo en blanco y Si est utilizando una entrada mixta AV, conecte el cable de video (amarillo) en el conector Verde de la
negro. entrada 1 de Componente del televisor.
Al cambiar de canal, la imagen se Si est conectado a un receptor de cable, pruebe reiniciarlo. (Vuelva a conectar el cable de CA y espere
congela o se ve distorsionada o hasta que el receptor de cable se reinicie. Puede tardar unos 20 minutos.)
aparece con retraso. Establezca la resolucin de salida del receptor de cable en 1080i o 720p.
Primero, realice la Prueba de sonido para determinar si el audio de su televisor funciona correctamente.
Problemas de sonido Vaya a MENU - Soporte tcnico - Autodiagnstico - Prueba de sonido
Si el audio es correcto, el problema del sonido puede provenir de la fuente o la seal.
No hay sonido o se oye demasiado Compruebe el volumen del dispositivo (receptor de cable/satlite, DVD, Blu-ray, etc.) conectado al
bajo con el volumen al mximo. televisor.
Compruebe las conexiones de los cables. Asegrese de que no haya un cable de video conectado a una
entrada de audio.
Los altavoces hacen un ruido
Para la conexin de la antena o el cable, compruebe la potencia de seal. El bajo nivel de seal puede
inapropiado. causar distorsin del sonido.
Realice la Prueba de sonido como se explic anteriormente.
Espaol - 13
El televisor se apaga Compruebe si la opcin Temporizador est establecida en Apagado en el men Sistema.
automticamente. Si el televisor est conectado a una PC, compruebe la configuracin de la alimentacin de la PC.
Compruebe que el cable de alimentacin CA est bien conectado en la toma de la pared y en el televisor.
Cuando se ve la televisin con una conexin de antena o cable, el televisor se apaga tras 10-15 minutos si
no hay seal.
No hay imagen ni video. Compruebe las conexiones de los cables. (desconecte y vuelva a conectar todos los cables del televisor y
de los dispositivos externos.)
Establezca la salida de video del dispositivo externo (receptor de cable/satlite, DVD, Blu-ray, etc.) de
modo que coincida con las conexiones de la entrada del televisor. Por ejemplo, si la salida de un dispositivo
externo es HDMI, se debe conectar a una entrada HDMI en el televisor.
Compruebe que los dispositivos externos estn encendidos.
Asegrese de seleccionar la fuente correcta del televisor pulsando el botn SOURCE del control remoto.
Reinicie el dispositivo conectado volviendo a conectar el cable de alimentacin del dispositivo.
La imagen se ve distorsionada: error La compresin de los contenidos de video puede causar imgenes distorsionadas especialmente en las
de macrobloques, microbloques, escenas de movimiento rpido, como en los deportes y las pelculas de accin.
puntos, pixelizacin. Un nivel de seal bajo puede causar distorsin de la imagen. Este no es un problema del televisor.
Otros
Barras horizontales rodantes de Desconecte los terminales de audio izquierdo y derecho del receptor de satlite. Si los zumbidos cesan,
color prpura/verde y zumbidos en esto indica que el receptor de satlite tiene un problema en la conexin a tierra. Sustituya los cables de
los altavoces del televisor con la video de componentes por una conexin HDMI.
conexin del cable de componentes.
La imagen no se muestra en la En cada lado se muestran barras negras en los canales de alta definicin (HD) cuando se muestran
pantalla completa. contenidos SD mejorados (4:3).
Aparecern barras negras en las partes inferior y superior cuando se vean pelculas que tienen diferentes
formatos que el televisor.
Ajuste la opcin del tamao de imagen del dispositivo externo o del televisor al modo de pantalla completa.
Cambie las pilas del control remoto con la polaridad correcta (+/).
El control remoto no funciona. Limpie la ventana de transmisin ubicada en la parte superior del control remoto.
Apunte con el control remoto directamente al televisor desde una distancia de 1,5 - 2 metros.
Espaol - 14
Aparece un mensaje de Modo no Compruebe la resolucin que admite el televisor y ajuste en consecuencia la resolucin de salida del
compatible. dispositivo externo. Consulte como configurar la resolucin en este manual.
Subttulo no se puede seleccionar en el men del televisor cuando est conectado mediante HDMI o
Subttulo en el men del televisor Componente.
aparece atenuado. Se debe activar Subttulo en el dispositivo externo.
El men PIP no est disponible. La funcin PIP slo est disponible cuando utiliza una fuente de HDMI o componente.
Algunas funciones e imgenes que aparecen en este manual estn disponibles solo en modelos especficos.
Puede mantener su televisor en ptimas condiciones para actualizar el ltimo firmware en el sitio Web (samsung.com Soporte
tcnico) por USB.
Este panel LED TFT utiliza un panel compuesto de subpxeles que requieren una tecnologa sofisticada para producirse. No
obstante, es posible que existan algunos pxeles brillantes u oscuros en la pantalla. Estos pxeles no influirn en el rendimiento del
producto.
Espaol - 15
Especificaciones
Familia de producto Modelo Tornillo estndar Cantidad
VESA (A * B)
UN19F4000
7.5 X 7.5
UN22F5000 M4
UN28F4000 10 X 10
LED-TV UN32F4000 4
UN32F5000 20 X 20
UN40F5000 M8
UN46F5000
40 X 40
UN50F5000
Retire los tornillos de los orificios de montaje antes de instalar el montaje de pared.
No instale el equipo de montaje de pared mientras el televisor est encendido. Se podra producir una descarga
elctrica con riesgo de causar lesiones personales.
Espaol - 16
1. Coloque firmemente las grapas sobre la pared con los tornillos. Confirme
que los tornillos se hayan instalado firmemente en la pared.
Segn el tipo de pared quizs necesite algn material adicional para
el anclaje.
Dado que las grapas, los tornillos y la cadena necesarios no se
suministran con el producto, deber adquirirlos por separado.
2. Quite los tornillos de la parte central posterior del televisor, colquelos en las
grapas y luego vuelva a ajustar los tornillos en el televisor.
Los tornillos pueden no suministrarse con el producto. En ese caso,
deber comprar los tornillos.
3 Conecte las grapas unidas al televisor y las grapas unidas a la pared con
una cadena fuerte y tnsela firmemente.
NOTA
Instale el televisor cerca de la pared para evitar que se caiga hacia
atrs.
Las grapas de la pared deben estar a la misma o a menor altura que
las grapas del televisor.
Cuando desee mover el televisor deber desatar la cadena. Pared
4 Verifique que todas las conexiones estn bien aseguradas. Comprubelas
peridicamente para detectar cualquier signo de fatiga o falla. Si tiene
alguna duda sobre la seguridad de sus conexiones, comunquese con un
instalador profesional.
Cubierta de
conexiones
Espaol - 17
Espaol - 18
Tamao de pantalla 47 cm 69 cm 80 cm 54 cm
Sonido
3W x 2 5W x 2 10W x 2 3W x 2
(Salida)
Peso
Sin el soporte 2.5 kg 4.2 kg 5.2 kg 2.6 kg
Con el soporte 2.6 kg 4.7 kg 5.7 kg 2.9 kg
Sonido
10W x 2
(Salida)
Peso
Sin el soporte 5.0 kg 8.0 kg 10.8 kg 13.0 kg
Con el soporte 5.6 kg 9.5 kg 12.3 kg 14.5 kg
Espaol - 19
Otras restricciones
El contenido del video no se reproducir, o no se reproducir correctamente, si hay un error en el contenido o en el contenedor.
El sonido y el video pueden no funcionar si el contenido tiene una velocidad de bits y de transferencia superior a la de Marco/segundo relacionada en la
tabla.
Si hay un error en la tabla de ndice, la funcin de Bsqueda (Saltar) no se admite.
Algunos dispositivos de cmaras digitales/USB pueden no ser compatibles con el reproductor.
Se puede mostrar el men con demora si el video es de ms de 10MBps (velocidad de bits).
Decodificador de video Decodificador de audio
Admite hasta H.264, Nivel 4.1 (FMO/ASO/RS no se admiten.)
Velocidad de transferencia: WMA 10 Pro admite hasta 5.1 canales y el perfil M2.
- Inferior a 1280 x 720: 60 fotogramas mx El audio WMA Lossless no se admite.
- Superior a 1280 x 720: 30 fotogramas mx Vorbis admite hasta 2 canales.
VC1 AP L4 no se admite. DD+ admite hasta 5.1 canales.
GMC 2 o superior no se admite.
Espaol - 20