Académique Documents
Professionnel Documents
Culture Documents
Commands Used: -
Insert Product
Insert Resource.
Step 2: - Create the Process library and add processes under Process List as shown
below.
Commands Used: -
Go to File New Process Library and create new activity type
Go to Activity Management Insert Activity Library. Select the process file created
and Process library will be mapped with current file.
Select the Product and then the process to which the product is to assign.
Select the Resource and then the process to which the product is to assign.
2) Go to Edit in above snap and define the Translation and Rotation values.
Step 5: - Create different activities for the products and resources.
Commands Used: - Create required activities below every process node using below
commands
1) Create View Point Activity.
2) Create Visibility Activity.
3) Create a Text Message Activity.
4) Create a Pause Activity.
5) Create a Delay Activity.
6) Create a Move Activity.
Define proper start and end time for each activity created in the Process list.
Creating a Move Activity.
Go to Move Activity Select reference activity in the Process List Select the
product/resource to move.
The complete Product and Resource simulation can be created using the above
mentioned steps
Step 6: - Generating the PERT Chart and Gantt chart.
Commands Used: -
Define all the required attributes in the Video Properties window and click OK
Go to Simulation Process Simulation Command, keeping open the Video Recorder
window
Play the simulation and press the record button in video recorder window the video will
be recorded and saved at the location mentioned in Video Properties window.
Complied By: -
Kiran S. Bhokare
Application Specialist-PLM
EDS Technologies Pvt Ltd
+91 9096308122