Académique Documents
Professionnel Documents
Culture Documents
sirenco
sirens beLLs Hooters eLectronic sounders FLameProoF deVices marine sounders and beacons
intrinsicaLLY saFe sounders and beacons Voice sounders combination units airHorns
Contents
Flameproof 9
UL Explosion Proof 10
apparatus CHART 11
Index 13-20
Products 21-158
Notes 159
Distributor:
sirenco
2
Contents
sirenco
3
SELECTION AND APPLICATION
Listed below are some important product information and categories which will be required when making a selection of
the type of signalling unit that will best suit your application. There is a wide range of sirens, electronic sounders, hooters,
flameproof units and beacons available to choose from. Kama Industries offers on site service in assisting you with your
selection of a signalling unit. Please contact your supplier to arrange this.
PLEASE NOTE: Utmost care was taken in the preparation of this catalogue to insure all the information is correct.
Kama Industries and any of its distributors do not accept any liabilities for any consequences resulting in the use of the
information contained in these documents. If in doubt, please contact your supplier.
Selecting a signalling device for a particular application is usually determined by various factors:
The type of electricity supply available
Ambient noise in the environment
The duration of signal required
The quality and type of audible or visual signal required to attract attention
Environmental conditions (indoor, outdoor, explosive atmosphere)
Environmental Factors
The intensity and type of sounder or beacon chosen for the area in which they will be used, will be dependant on the
application i.e. sounders for certain applications in the Food Industry may not be suitable for similar applications in
an industrial area. A sounder used in a Manufacturing Company (Heavy Industrial) may not be suitable for a similar
application at a School.
Marine
Dock and Ship installations, including any other hazardous sites (oil terminals etc.)
4
seLeCtIon AnD APPLICAtIon
Frequency
The frequency is the identication of note and is usually defined by the number of vibrations per second. To measure
frequency one should use a frequency meter. In cases where the electrical contractor does not have such a meter, it is
usually sufficient for the ambient noise frequency in an environment for our purposes to be identified. For example, the
noise in a machine shop in which a grinder is being operated would be of a high frequency, while that of forge with a
drop hammer would be of a low frequency.
Time rating
Account must be taken of the time cycle over which the alarm is required to operate and a signal has to be selected which
has an adequate time rate. It should be noted that sounders used as evacuation alarms are required to be continuously
rated. Sirens for example, are products available on the market which have time ratings of either one minute or more,
but these products are not accepted by the Fire Authorities. The contractor should keep this in mind when modifying or
inspecting existing installations.
Noise Attenuation
In selecting the correct sound pressure level required to cover an application, it is necessary to appreciate that as a rule of
thumb sound is absorbed and reduces at the rate of 6 decibels as the distance from the signal is doubled. This factor is
known as attenuation. Where the operating conditions are difficult, for example where there is a likelihood of high winds
or where there are solid objects in the noise path, attenuation of 8 to 10 decibels should be allowed for to avoid blind
spots or inadequate coverage. Before finally choosing the signal to be used, ensure that the same or similar sound is not
used in an adjacent system for other applications. Should the sounder be installed outdoors and be subjected to exterior
elements, then a weather proof version must be selected. It should be remembered that there are also in-door situations
that require weatherproof enclosures. Explosion or flameproof signal devices are essential if the sounder is required to be
sited in a location where there are explosive or fire hazard conditions.
Sounders Available
There are many basic types of signalling devices available but in this selection we are covering:
Sirens
Buzzers and Hooters
Electronic Sounders
Beacons
Bells
5
SELECTION AND APPLICATION
Sirens
Sirens are low frequency devices usually continuous rated and are electric motor driven. Air is pulled in through a multi
bladed impeller and pushed out through radial vents. The combination of motor speed and the number of impeller blades,
with the number and spacing of the radial outlets determine the frequency. The siren is used extensively for disaster
warning but also has many other applications. These include, uses as fire alarms, anti-theft/security alarms, process control,
time signalling, fault indication and machinery stop-start alarms. Most individual requirements are covered by sirens rated
from 100 W to 7.5 KW, which have sound outputs from 95 dB to 145 dB at 1 metre distances and giving an audible signal
over a range of 100 to 15000 metres.
Electronic Sounders
The electronic sounder is by far the most versatile device available and has many distinct advantages as far as the design
engineer and contractor is concerned. Not least of these is the low current consumption and relatively high sound output,
which make the electronic sounder ideal for use in conjunction with battery powered systems. Consequently, this type of
sounder is also used extensively for fire and security alarm systems, as well as industrial mining, process control, marine
and hazardous area applications.
Beacons
The beacons can assist by adding additional visual attraction by means of a flashing, static or rotating format. These units
are normally available in RED, AMBER, GREEN and BLUE, but other colours are available on request. The LED beacon can
be set to flash at up to 120 flashes per minute or remain static.The Xenon flasher is avaliable in all the colours and the
LED flasher usually only in RED or AMBER, other colours available on request. When beacons are used in conjunction with
sirens or sounders, the unit can be connected to set the siren and beacon off simultaneously or with the siren sounding for
a short period and the beacon flashing until the condition for alert has been rectified.
Bells
These are motor driven or coil driven devices mainly used for School alarms, Fire and Security alarms and time signalling.
These units have high frequencies and low current consumption. Of particular interest to the contractor is that models
have been designed to make installation very simple.
6
A gUIDe to seLeCtIng AnD PosItIonIng
wIDe AreA sIrens
When selecting a siren, a careful study of the specific project is required. Although Kama Industries will always be prepared
to give advice, it is first of all necessary that each of the following points be considered:
1. The nature of the proposed warning signals, including sequences, duration of blasts, intervals and length of signal.
Each type of hazard should be given its own code to ensure the correct response. On-site warning signals must not be
confused with off-site warning signals.
2. Area and range of audibility to be covered by the system. The signal must be clearly audible to all persons, inside
and outside the plant likely to be affected.
3. The nature of the terrain and construction and heights of the buildings and structures on the site. Uneven ground
and enclosed or noisy areas must be taken into account.
4. The type of system to be installed. Plants with high levels of machine noise - or covering large areas - may be better
covered by a series of smaller sirens than by one large unit.
5. Local meteorological conditions. For example, temperature, fog, mist, wind, snow or rainfall must also be taken into
account.
6. The nature of other signals in the area. Hazard signals must not conflict with emergency services or civil defence
signals.
7. Test facilities. Siren motors, shutter and signal sequences should be regularly tested to ensure that they are still
functioning properly.
9. The positioning of sirens. The ideal height above ground level for a siren depends on the individual type and
sound output of the instrument. Sirens should not be mounted too high above ground level: 4 m to 6 m are usually
recommended. Installing sirens on top of high buildings often has the effect of deflecting the sound wave upward
because of negative temperature gradients. Sirens should not be located close to tall buildings. There should be
adequate clearance around each instrument to allow sound distribution.
Coded Sirens
Similar to general-purpose sirens, but incorporating sound damping shutters that enable them to be used for making
clearly defined coded signals i.e. succession of short or long blasts, a mixture of short or long blasts, etc. This enables one
instrument to be used for a number of different signals. Shutter mechanisms are operated by a solenoid and are quoted as
accessory items, according to individual requirements.
remote Triggering
Situations may arise where a signalling device is installed on a site with a power source available at or close to the
mounting position of the siren. To trigger or switch the siren from a control room or distant site on the plant, a separate
cable may be required to be installed for this application. We offer a remote control switching system to accommodate
this. A transmitter is supplied to be installed at the control point and a receiver at the siren. This will allow more than one
siren to be triggered by one central transmitter.
7
Ingress Protection Table
Each product in this catalogue has been evaluated against the IP rating system. This is intended to allow the installer to
establish the product suitablity when subjected to the elements. It must be stressed that the products have been evaluated
using the first two digits of the rating system (and not certified and tested in some cases), as follows:
8
FLAmeProoF
Hazardous Areas
Note: (Classification of hazardous areas and equiptment must be undertaken by an authorised and qualified person. The
following information may be used based on that assumption, as guidance.)
In SA these products must comply to the latest SANS requirements for use of explosion protected devices in hazardous
areas. Visit www.sabs.co.za to see SANS 10086 - SANS 10119.
Hazardous areas are classified into zones and the following deals only with the risk due to flammable gases, vapours and
mists.
rEPrESENTATIVE CENELEC, EN50 018 SANS 60079 FrANCE C12-230 gErMANy VdE 0171 uSA uL698
gAS BS5501 PT.5
grOuP grOuP grOuP CLASS grOuP
METHANE I I IA orIB 1 D
PrOPANE IIA IIA IIA or IIB - -
ETHyLENE IIB IIB IIIA 2 C
HydrOgEN IIC IIC - 3a B
CArBON dISuLFIdE IIC* IIC - 3b -
ACETyLENE IIC IIC - 3c A
*Apparatus may not be suitable for Carbon Disulfide
gas Tempretures
A gas and air mixture can ignite when it comes into close contact with an excessively hot surface. The surface temperature
at which the equipment operates is therefore important and is classified as follows:
9
UL EXPLOSION PROOF
The UL system of classification is simlar in principle as the CENELEC system as it classifies products in terms of class, division
and group, It is briefly explained as follows:
CLASS
Class I Gas
Class II Dust
Class III Fibre
DIVISION
Division I Hazardous atmosphere present under normal conditions (similar to Zone 0 & Zone 1)
Division II Hazardous atmosphere present under abnormal conditions (similar to Zone 2)
GROUPS
A,B,C & D Gas (See representative gas table on page 9)
E Metal dust
F Carbon
G Grain / Chemical dust
Notes
10
Suitability of apparatus for use in Group I
Apparatus Suitability of apparatus for use in the various zones in non-mining Group II applications
hazardous locations in mines
Explosion protection Types of apparatus to which protection can be applied Zone 0 Zone 1 Zone 2 Zone 20 Zone 21 Zone 22 -
Category 1 Category 2 Category 3 Category 1 Category 2 Category 3 Category M1 or M2 (if switched of as required below)
Intrinsically safe electrical Instruments and instrument control gear, light fittings, small motors and Suitable Suitable Suitable Separate certification for these locations is generally required Suitable
apparatus (EX ia) transformers. Standard equipment powered intrinsically safe supplies
APPArAtUs ChArt
Intrisically safe electrical As for Ex ia apparatus Not Suitable Suitable Suitable Separate certification for these locations is generally required Suitable but switch off if gas concentrations > 1.4 %
apparatus (EX ib) (volume fraction)
Double protected explosion Instruments and instrument control gear, push button stations, switches, Suitable Suitable Suitable Separate certification for these locations is generally required Suitable
protected apparatus junction and terminal boxes, conduit with stopper boxes, cable glands, light
fittings, motors, switch gear, starters, distribution boards and transformers
Flameproof apparatus (Ex D) Instruments and instrument control gear, push button stations, switches, Not Suitable Suitable Suitable Separate certification for these locations is generally required Suitable but switch off if gas concentrations > 1.4 %
junction and terminal boxes, conduit with stopper boxes, cable glands, light (volume fraction)
fittings, motors, switch gear, starters, distribution boards and transformers
Pressurized electrical apparatus As for flameproof apparatus Not Suitable Separate certification for these locations is generally required Suitable with isolating interlocks, but switch off if gas
(Ex p) concentrations > 1.4 % (volume fraction)
Encapsulated electrical apparatus As for flameproof apparatus, but often in conjunction with other protection Not Suitable Suitable Suitable Separate certification for these locations is generally required Suitable but switch off if gas concentrations > 1.4 %
(Ex m) (volume fraction)
Sand-filled or powder-filled Switch gear, starters and transformers Not Suitable Suitable Suitable Separate certification for these locations is generally required Suitable but switch off if gas concentrations > 1.4 %
electrical apparatus (Ex q) (volume fraction)
Specially protected electrical As for flameproof apparatus, but often in conjunction with other protection Suitable if certified as Suitable if certified as Suitable if certified Separate certification for these locations is generally required Suitable if certified as such
apparatus (Ex s) such such as such
Increased safety electrical Instruments, junction and terminal boxes, conduit with stopper boxes, cable Not Suitable Suitable Suitable Separate certification for these locations is generally required. Suitable but switch off if gas concentrations > 1.4 %
apparatus (Ex e) glands, light fittings, motors and transformers Suitable but switch off if gas concentrations > 1.4 % (volume (volume fraction)
fraction)
Type "n" electrical apparatus (Ex As for increased safety apparatus, but often in conjunction with other Not Suitable Not Suitable Suitable Separate certification for these locations is generally required Not Suitable
n) protection
Dust-ignition-protected electrical As for flameproof apparatus Not Suitable Not Suitable Not Suitable Suitable if DIP A20 Suitable if DIP A20, Suitable if DIP A20, Not Suitable
apparatus (DIP) or B20 with IP 65 A21, A22, B20 or B21 A21, B20 or B21 with
enclosures with IP 65 enclosures IP 65 enclosures
11
DECIBEL VERSUS DISTANCE Chart
12
InDeX
MOTOrISEd SIrENS
Sirenco 500SL Sirenco 1000SL Banshee Mono Banshee Duplo
13
InDeX
Air Horn 370 Hz Air Horn 660 Hz Sirenco Motorised Sirenco HE36 Hooter Telkom Relay
Hooter
Banshee EX Mono Banshee EX Duplo Siren Banshee EX Multi Banshee EX Xenon Banshee EX LED
Siren S1 S1 Sounder S1 Beacon S1 Beacon S1
Banshee EX 26S Siren Banshee EX 26D Banshee EX Multi Sounder Banshee EX Multi Sounder Banshee EX Mono Siren
S1 Siren S1 & Beacon LED Combo S1 & Beacon Xenon Combo S1 & Beacon LED/Xenon
Combo S1
14
InDeX
COMBINEd uNITS
Banshee Combo Banshee Combo Banshee Flashtone
ML & MX DL & DX Excel Lite
ELECTrONIC SOuNdErS
Banshee Multitone Excel Cybertone Ban F1
BEACONS BANSHEE
Banshee Beacons Sirenco Beacons Sirenco Xen & LED Sirenco Rotating
Magnetic Base Magnetic Base
E2S A100 Sounder & E2S A105 Sounder & E2S A112 Sounder & E2S A121 Sounder & E2S A141 Sounder
AL100 Combo AL105 Combo AL112 Combo AL121 Combo
E2S Ex 05 Beacon E2S Ex 10 Beacon E2S Ex 15 Beacon E2S Ex 1105 Combo E2S Ex 11 Sounder
IS rANgE
E2S IS Minialarm E2S IS Minialert E2S IS Minialite E2S IS A105 Sounder E2S IS L101 Beacon
Sounder Combo Beacon
BEACONS E2S
E2S MA112 Marine E2S MA121 Marine E2S Marine 5 Beacon E2S Marine 10 Beacon E2S Marine Combo
Sounder Sounder
17
INDEX
18
InDeX
BEACONS SPECTrA
Spectra B100SLF Status Spectra B100FLF Flashing Spectra B100STR Spectra B100LDA Spectra B200SLF Status
Filament Beacon Filament Beacon Xenon Beacon LED Beacon Filament Beacon
Spectra B200FLF Flashing Spectra B200STR Spectra B200LDA Spectra B300SLF Spectra B300FLF
Filament Beacon Xenon Beacon LED Beacon Status Filament Beacon Blinking Filament Beacon
Spectra B300STR Spectra B300SLH Status Spectra B300FLH Blinking Spectra B300STS Spectra B300STF Dual
Xenon Beacon Halogen Beacon Halogen Beacon Synchronised Beacon Frequency Xenon Beacon
Spectra B300RTH Rotating Spectra B300LDA LED Spectra B400SLF Spectra B400FLF Spectra B400STR
Halogen Beacon Multi-Function Array Status Filament Beacon Blinking Filament Beacon Xenon Beacon
Beacon
Spectra B400SLH Status Spectra B400FLH Blinking Spectra B400STS Spectra B400RTH Spectra B400LDA LED
Halogen Beacon Halogen Beacon Synchronised Rotating Halogen Beacon Multi-Function Array
Xenon Beacon Beacon
19
InDeX
E2S 22D Panel E2S 28D Panel Sirenco Panel Mount Sirenco Panel Mount Sirenco Panel Mount
Mount Indicators Mount Buzzers Indicators Buzzer Combination Unit
Spectra B350TLA Spectra B350TSB Spectra B450TLA Spectra B450TSB Spectra B450TDB
LED Array Filament Lamp LED Array Filament Lamp Dual Filament
Spectra B300SND & Spectra H100B Horn & Spectra H100T Trumpet Spectra H110T Trumpet Spectra Signal Tower
B400SND sounder H100BL Combo Horn & H100TX Combo Horn & H110TX Combo Stack Lights 70mm
VOLTAgE rEFErENCE:
In this catalogue the following voltages are compatable 220 Vac = 250 Vac, 380 Vac = 400 Vac and 525 Vac = 550 Vac
20
MOTORISED SIRENS
sIrenCo 500sL
VOLTAgE VOLTAgE
12 VAC/dC 24 VAC/dC
110 VAC/dC 220 VAC/dC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vac/dc 24 Vac/dc 110 Vac/dc 220 Vac/dc
duTy CyCLE 5min on - 10min off
SOuNd OuTPuT 107 dB(A) at 1m
SOuNd FrEquENCy 1 400Hz
APP. rANgE 500m in still air on open field
CurrENT CONSuMPTION* 12V - 10.6A 24V - 7.5A 10V - 1.0A 220V - 0.7A
IP rATINg IP 45
WEIgHT 1.1kg
PACkINg dIMENSIONS 190x140x155mm
* start-up current x 8
21
Motorised Sirens
Sirenco 1000sl
Voltage Voltage
12 Vac/dc 24 Vac/dc
110 Vac/dc 220 Vac/dc
All dimensions in mm
Specifications
Voltage 12 Vac/dc 24 Vac/dc 110 Vac/dc 220 Vac/dc
Duty Cycle 5min on - 10min off
Sound Output 114 dB(A) at 1m
Sound Frequency 1 000Hz
App. Range 1 000m in still air on open field
Current Consumption* 12V - 17.4A 24V - 8.8A 110V - 1.9A 220V - 1.0A
IP Rating IP 45
Weight 1.2kg
Packing Dimensions 190x140x155mm
* Start-up current x 8
22
MOTORISED SIRENS
bAnshee mono
VOLTAgE VOLTAgE
12 VAC/dC 24 VAC/dC
110 VAC/dC 220 VAC/dC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vac/dc 24 Vac/dc 110 Vac/dc 220 Vac/dc
duTy CyCLE 1 minute on - 8 minutes off
SOuNd OuTPuT 113 dB(A) at 1m
SOuNd FrEquENCy 950-1 200Hz
APP. rANgE 1 000m in still air on open field
MOTOr Brush motor with roller bearing & guide bush - 6400 rpm
CurrENT CONSuMPTION* 12V - 9A 24V - 6A 110V - 1.5A 220V - 0.5A
IP rATINg IP 65
WEIgHT 1.6kg
PACkINg dIMENSIONS 130x130x190mm
* start-up current x 8
23
Motorised Sirens
Banshee Duplo
Voltage Voltage
12 / 24 Vdc 110 Vac/dc
220 Vac/dc -
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac/dc 220 Vac/dc
Duty Cycle 10 Hours continuous
Sound Output 12V - 110 dB(A) at 1m 24V - 113 dB(A) at 1m 110/220V - 116 dB(A at 1m)
Sound Frequency 950 - 1 200Hz
App. Range 1 000m in still air on open field
Motor Brush motor with double roller bearing - 8 000 rpm
Current Consumption* 12V - 3A 24V - 5.25A 110V - 2A 220V - 1A
IP Rating IP 65
Weight 2.5kg
Packing Dimensions 150x150x190mm
* Start-up current x 8
24
LONG RANGE SIRENS
sIrenCo 1500s
VOLTAgE VOLTAgE
110 VAC/dC 220 VAC/dC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 110 Vac/dc 220 Vac/dc
duTy CyCLE Continuous (thermal cut out protected)
SOuNd OuTPuT 122 dB(A) at 1m
SOuNd FrEquENCy 1 600Hz
APP. rANgE 1 500m in still air on open field
MOTOr Brush motor with roller bearing
CurrENT CONSuMPTION* 110V - 5A 220V - 3.5A
IP rATINg IP 55 (IP 65 available on request)
WEIgHT 6.6kg
PACkINg dIMENSIONS 240x183x183mm
* start-up current x 8
25
Long range Sirens
Sirenco 2d
Totally enclosed, robust, all weather cast aluminium siren with a very
powerful low dual frequency output. Ideally suited for use in factories,
Long range Sirens - sirenco 2d
Voltage Voltage
110 Vac/dc 220 Vac/dc
All dimensions in mm
Specifications
Voltage 110 Vac 220 Vac
Duty Cycle Continuous (Thermal cut out protected)
Sound Output 121 dB(A) at 1m
Sound Frequency 370/660Hz
App. Range 2 000m in still air on open field
Motor Brush motor with roller bearing - 4 000rpm
Current Consumption* 110V - 3A 220V - 2.2A
IP Rating IP 55 (IP 65 available on request)
Weight 8.2kg
Packing Dimensions 270x175x190mm
* Start-up current x 8
26
LONG RANGE SIRENS
sIrenCo 3LF
Very durable weather proof siren manufactured from the highest quality
cast aluminium with a very powerful low frequency output. ideally suited
VOLTAgE VOLTAgE
220 VAC/dC 380 VAC (3)
525 VAC (3)
All dimensions in mm
SPECIFICATIONS
VOLTAgE 220 Vac 380 Vac (3) 525 Vac (3)
duTy CyCLE Continuous
SOuNd OuTPuT 125 dB(A) at 1m
SOuNd FrEquENCy 560Hz
APP. rANgE 3 000m in still air on open field
MOTOr 1.1 KW motor - 2875 rpm
CurrENT CONSuMPTION* 220V - 9A 380V - 5A 525V - 2A
IP rATINg IP 55 (IP 65 or IP 56 available on request)
WEIgHT 22kg
PACkINg dIMENSIONS 400x380x300mm
* start-up current x 8
27
LONG RANGE SIRENS
sIrenCo 3LF VertICAL
durable weather proof siren manufactured from the highest quality cast
aluminium with a very powerful low frequency output. ideally suited for
LONg rANgE SIrENS - SIrENCO 3LF VErTICAL
VOLTAgE VOLTAgE
220 VAC/dC 380 VAC (3)
524 VAC (3)
All dimensions in mm
SPECIFICATIONS
VOLTAgE 220 Vac 380 Vac (3) 524 Vac (3)
duTy CyCLE Continuous
SOuNd OuTPuT 125 dB(A) at 1m
SOuNd FrEquENCy 560Hz
APP. rANgE 3 000m in still air on open field
MOTOr 1.1 KW motor - 2875 rpm
CurrENT CONSuMPTION* 220V - 9A 380V - 5A 524V - 2A
IP rATINg IP 55 (IP 65 or IP 56 available on request)
WEIgHT 22kg
PACkINg dIMENSIONS 400x380x300mm
* start-up current x 8
28
LONG RANGE SIRENS
sIrenCo 5s
total robust, rugged cast aluminium siren with a very powerful low
frequency output. ideally suited for use in factories, refineries, quarries,
VOLTAgE VOLTAgE
220 VAC/dC 380 VAC (3)
525 VAC (3)
All dimensions in mm
SPECIFICATIONS
VOLTAgE 220 Vac 380 Vac (3) 525 Vac(3)
duTy CyCLE Continuous
SOuNd OuTPuT 130 dB(A) at 1m
SOuNd FrEquENCy 560Hz
APP. rANgE 5 000m in still air on open field
MOTOr 2.2KW motor - 2 875rpm
CurrENT CONSuMPTION* 220V - 9.5A 380V - 5A 525V - 3A
IP rATINg IP 55 (IP 65 or IP 56 available on request)
WEIgHT 50kg
PACkINg dIMENSIONS 500x450x420mm
* start-up current x 8
29
Long range Sirens
Sirenco 10S
Voltage Voltage
380 Vac (3) 525 Vac (3)
All dimensions in mm
Specifications
Voltage 380 Vac (3) 525 Vac (3)
Duty Cycle Continuous
Sound Output 140 dB(A) at 1m
Sound Frequency 560Hz
App. Range 10 000m in still air on open field
Motor 4 KW motor - 2875 rpm
Current Consumption* 380V - 10A 525V - 6A
IP Rating IP 55 (IP 65 or IP 56 available on request)
Weight 68kg
Packing Dimensions 600x480x500mm
* Start-up current x 8
30
LONG RANGE SIRENS
sIrenCo 15D
all-weather enclosed motor is ideally suited for outdoor use. this siren
would be used for audible warning at mines, industries and refineries, oil
VOLTAgE VOLTAgE
380 VAC (3) 525 VAC (3)
All dimensions in mm
SPECIFICATIONS
VOLTAgE 380 Vac (3) 525 Vac (3)
duTy CyCLE Continuous
SOuNd OuTPuT 145 dB(A) at 1m
SOuNd FrEquENCy 480/560Hz
APP. rANgE 15 000m in still air on open field
MOTOr 7.5KW motor - 2875rpm
CurrENT CONSuMPTION* 380V - 15A 525V - 11A
IP rATINg IP 55 (IP 65 or IP 56 available on request)
WEIgHT 118kg
PACkINg dIMENSIONS 600x650x500mm
* start-up current x 8
31
Long range Sirens
Sirenco ANTI-ICING
The Anti-Icing unit is ideally suited for outdoor use in extreme cold conditions. This Anti-Icing unit is used in conjunction with the
Sirenco 5S, 10S and 15D at refineries. The Anti-Icing unit has an element mounted in the housing of the siren, this prevents the siren
long Range Sirens - Sirenco ANTI-ICING
All dimensions in mm
Specifications
Voltage 220Vac
Duty Cycle Continuous
Current Consumption The 220V anti icing unit will run from a 15 Amp power supply. At the lowest setting the unit will maintain
the siren temperature at approximately 15C and consume about 1.3 Amps. Should ambient conditions
increase in demand, a higher temperature can be adjusted by a control knob.
IP Rating IP 65
Fitting The elements are fitted into the back of the impeller housing. This is done during the Manufacturing
process of the siren. The unit cannot be fitted on existing sirens and should be ordered separately as an
additional feature.
Mounting Anti-Icing units are mounted on request; heating elements are embedded in the impeller housing. The
temperature is controlled to prevent the unit from icing up, when ambient temperature drops below
freezing.
Heating Element The element temperature is controlled by a solid state relay and can be set to keep the unit between 8C
and 15C.
Power Supply The power supply to the heating element is constantly on and is independent from the power supply that
activates the siren. Two separate power supplies are to be installed.
32
LONG RANGE SIRENS
sIrenCo shUtter VALVe
220Vac Supply
85
145
500
All dimensions in mm
SPECIFICATIONS
VOLTAgE 220V
CurrENT CONSuMPTION 220V - 1A
IP rATINg IP 55
33
Hand Operated Sirens
Sirenco H100
available, blasting sites etc. This is a simple, maintenance free siren with a
sealed gearbox.
All dimensions in mm
Specifications
Voltage Hand Operated
Sound Output 105 dB(A) at 1m
Sound Frequency 500Hz
App. Range 500m in still open field
Motor Sealed gearbox crank handle with ratchet
Weight 1.2kg
Packing Dimensions 15.5x15.5x16mm
34
HAND OPERATED SIRENS
sIrenCo h150 trIPoD
All dimensions in mm
SPECIFICATIONS
VOLTAgE Hand Operated
SOuNd OuTPuT 112 dB(A) at 1m
SOuNd FrEquENCy 500Hz
APP. rANgE 1 000m in still air on open field
MOTOr Sealed gearbox crank handle with ratchet
WEIgHT 5.1kg
PACkINg dIMENSIONS 660x300x230mm
35
Hand Operated Sirens
Sirenco H200
is available, blasting sites etc. The handle on top of the siren can be
selected to alter the sound output. This is a simple, maintenance free
siren with a sealed gearbox.
All dimensions in mm
Specifications
Voltage Hand Operated
Sound Output 120 dB(A) at 1m
Sound Frequency 500Hz
App. Range 2 000m in still air on open field
Motor Sealed gearbox crank handle with ratchet
Weight 12kg
Packing Dimensions 560x360x450mm
36
HAND OPERATED SIRENS
sIrenCo eX h200
30
140
45
R95
323
156
17
300 223
All dimensions in mm
SPECIFICATIONS
VOLTAgE Hand Operated
SOuNd OuTPuT 120 dB(A) at 1m
SOuNd FrEquENCy 500Hz
APP. rANgE 2 000m in still air on open field
MOTOr Sealed gearbox crank handle with ratchet
CLASSIFICATION EX s 1/2 T6 Gb Db
CErTIFICATION SAEX MS/11-052X
gAS grOuP I, II
IgNITION grOuP T6 - 85C
WEIgHT 13.5kg
PACkINg dIMENSIONS 560mmx360mmx450mm
37
Other Sirens
Sirenco Air Operated
All dimensions in mm
Specifications
Voltage Self cooling air driven motor
Duty Cycle Continuously rated
Sound Output 117 dB(A) at 1m
Sound Frequency 500Hz
App. Range 1 500m in still air on open field
Motor Air driven motor
Air Pressure 7 bar (100psi) max
IP Rating IP 44
Weight 2kg
Packing Dimensions 175x165x200mm
38
OTHER SIRENS
sIrenCo hyDrAULIC sIren
All dimensions in mm
SPECIFICATIONS
VOLTAgE Hydraulic motor
duTy CyCLE Continuously rated
SOuNd OuTPuT 117 dB(A) at 1m
SOuNd FrEquENCy 500Hz
APP. rANgE 1 500m in still air on open field
MOTOr Hydrostatically balanced hydraulic motor with automatic lateral adjustment
HydrAuLIC PrESSurE 240 bar max - Continuous 275 bar max - Intermittent
IP rATINg IP 44
WEIgHT 4kg
PACkINg dIMENSIONS 175x 65x200mm
39
hooters
Sirenco Air Horn 370 Hz
All dimensions in mm
Specifications
Voltage Air driven diaphragm
Duty Cycle Continuously rated
Sound Output 138 dB(A) at 1m
Sound Frequency 370Hz
App. Range 3 000m in still air on open field
Motor Air driven diaphragm
Air Pressure 7 bar or between 350 to 1000 Kpa
IP Rating IP 44
Weight 2.8kg
Packing Dimensions 210x340x190mm
40
HOOTERS
sIrenCo AIr horn 660 hz
All dimensions in mm
SPECIFICATIONS
VOLTAgE Air driven diaphragm
duTy CyCLE Continuously rated
SOuNd OuTPuT 138 dB(A) at 1m
SOuNd FrEquENCy 660Hz
APP. rANgE 3 000m in still air on open field
MOTOr Air driven diaphragm
HydrAuLIC PrESSurE 7 bar or between 350 to 1 000 Kpa
IP rATINg IP 44
WEIgHT 2.4kg
PACkINg dIMENSIONS 205x325x180mm
41
HOOTERS
sIrenCo motorIseD hooter
applications. air horns have been specially designed to meet the warning
needs for the south african transport, marine and industrial applications.
a High frequency air operated device with excellent sound penetration.
VOLTAgE VOLTAgE
12 VdC 110 VAC
24 VdC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE 1 minute on - 8 minutes off
SOuNd OuTPuT 120 dB(A) at 1m
SOuNd FrEquENCy 1 300Hz
APP. rANgE 2 000m
CurrENT CONSuMPTION 12Vdc - 5A 24Vdc - 2.3A 110Vac - 0.84A 220Vac - 0.76A
IP rATINg IP 45
WEIgHT 3kg
PACkINg dIMENSIONS 29.5mmx29.5mmx15.5mm
42
HOOTERS
sIrenCo he36 hooter
VOLTAgE VOLTAgE
12 VAC 24 VAC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vac 24 Vac 110 Vac 220 Vac
duTy CyCLE Continuously rated
SOuNd OuTPuT 105 dB(A) at 1m
SOuNd FrEquENCy 550Hz
APP. rANgE 500m in still air on open field
MOTOr Moving coil diaphragm
CurrENT CONSuMPTION 12V - 5.3A 24V - 2.7A 110V - 0.5A 220V - 0.3A
IP rATINg IP 44
WEIgHT 1.1kg
PACkINg dIMENSIONS 375x150x150mm
43
hooters
Telkom Relay
The Telkom relay works in conjunction with the HE36 hooter or any
other instantaneous operating device. The relay detects the ring signal
Hooters - Telkom Relay
on a telephone line and is used to pulse the hooter to give the ringing
effect when triggered.
Voltage Voltage
220 Vac -
All dimensions in mm
Specifications
Voltage 220 Vac and trigger voltage supplied via telephone line
Operating Area Indoor use only
IP Rating IP 44
Weight 250g
Packing Dimensions 110x70x60mm
44
BELLS
sIrenCo 6 beLL
the innovative and durable range of motor driven fire alarm bells offers
an excellent sonorous tone, high sound output and proven reliability.
VOLTAgE VOLTAgE
12 VAC 12 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 24 Vac 110 Vac 220 Vac
duTy CyCLE Continuously rated
SOuNd OuTPuT 95 dB(A) at 1m
SOuNd FrEquENCy 1 100Hz
APP. rANgE 300m in still air on open field
CurrENT CONSuMPTION 24Vdc - 11mA 24Vac - 16mA 110V - 25mA 220V - 20mA
IP rATINg IP 44
WEIgHT 420g
PACkINg dIMENSIONS 160x160x60mm
45
Bells
Sirenco Solenoid Bell
Voltage Voltage
24 Vdc 24 Vac
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 24 Vdc 24 Vac 110 Vac 220 Vac
Duty Cycle Continuously rated
Sound Output 106 dB(A) at 1m
Sound Frequency 1 100Hz
App. Range 600m in still air on open field
Current Consumption 24Vdc- 25mA 24Vac - 25mA 110V - 25mA 220V - 25mA
IP Rating IP 44
Weight 420g
Packing Dimensions 160x180x110mm
46
BELLS
sIrenCo soLenoID beLL - sIngLe stroke
this innovative and durable range of solenoid bells offers a high sound
output and proven reliability. the 150 mm version features the solenoid
VOLTAgE VOLTAgE
110 VdC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 110 Vdc (Single Stroke)
duTy CyCLE Continuously rated
SOuNd OuTPuT 106 dB(A) at 1m
SOuNd FrEquENCy 1 100 Hz
APP. rANgE 600m in still air on open field
CurrENT CONSuMPTION 110V - 25mA
IP rATINg IP 44
WEIgHT 420g
PACkINg dIMENSIONS 160x180x110mm
47
Flame Proof Devices
BANSHEE EX MONO SIREN S1
required. Please ensure that the unit is equipped with the correct flame
proof cable gland. The unit consists of a 304 type stainless steel housing
with a M20 cable entry, a stainless steel nose cone and a unique screw on
lid for cable connection.
Voltage Voltage
12 Vac/dc 24 Vac/dC
All dimensions in mm
Specifications
Voltage 12 Vac/dc 24 Vac/dc
Duty Cycle 1 min. on and 8 min. off
Sound Output 113 dB(A) at 1m
Sound Frequency 950 - 1 200Hz
App. Range 600m in still air on open field
Current Consumption* 12V - 9A 24V - 4.8A
Classification Exd I / IIC 150
Certification MS - XPL / 06849
Gas Groups I, IIA, IIB, IIC
Ignition Group T6 - 85C
Weight 11,3kg
Packing Dimensions 200x250x200mm
* Start-up current x 6
48
FLAME PROOF DEVICES
bAnshee eX DUPLo sIren s1
VOLTAgE VOLTAgE
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 110 Vac 220 Vac
duTy CyCLE 10 hours Continuous
SOuNd OuTPuT 116 dB(A) at 1m
SOuNd FrEquENCy 950 - 1 200Hz
APP. rANgE 1 000m in still air on an open field
CurrENT CONSuMPTION* 110V - 2A 220V - 1A
CLASSIFICATION Exd I / IIC 150
CErTIFICATION MS - XPL / 06849
gAS grOuPS I, IIA, IIB, IIC
IgNITION grOuP T6 - 85C
WEIgHT 11,3kg
PACkINg dIMENSIONS 200x250x200mm
* start-up current x 6
49
Flame Proof Devices
Banshee EX Multi Sounder S1
required. Please ensure that the unit is equipped with the correct flame
proof cable gland. The unit consists of a 304 type stainless steel housing
with a M20 cable entry, a stainless steel nose cone and a unique screw on
lid for cable connection.
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous rated
Sound Output 110 dB(A) at 1m
Sound Frequency 800 - 2 400Hz
App. Range 800m in still air on an open field
Current Consumption The amps vary from 40 - 70mA depending on the sound selection
Classification Exd I / IIC 150 DIP A21 (for group 21)
Certification MS - XPL / 06849
Gas Groups I, IIA, IIB, IIC
Ignition Group T6 - 85C
Weight 11,3kg
Packing Dimensions 200x250x200mm
50
FLAME PROOF DEVICES
bAnshee eX Xenon beACon s1
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous rated
CurrENT CONSuMPTION 12V - 250mA 24V - 130mA 110V - 80mA 220V - 50mA
COLOur Amber, Red, Blue and Green (other colours available on request)
LIgHT SOurCE Xenon Tube
LIgHT OuTPuT 5 Joule
CLASSIFICATION Exd I / IIC 150 DIP A21 (for group 21)
CErTIFICATION MS - XPL / 06849
gAS grOuPS I, IIA, IIB, IIC
IgNITION grOuP T6 - 85C
WEIgHT 11,3kg
PACkINg dIMENSIONS 200x250x200mm
51
Flame Proof Devices
Banshee EX LED Beacon S1
This LED beacon is suitable for use in fiery mines as well as petrochemical
plants and areas where an explosion-protected device is required. Please
Flame Proof Devices - Banshee EX LED Beacon S1
ensure that the unit is equipped with the correct flameproof cable gland.
The unit consits of a 304 type stainless steel housing with a M20 cable
entry, a stainless steel nose cone and a unique screw on lid for cable
connection.
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous rated
Current Consumption 12V - 150mA 24V - 125mA 110V - 60mA 220V - 45mA
Colour Amber, Red, Blue and Green
light source 24 Hi-Bright LEDs
Light output 5 Joule
Classification Exd I / IIC 150 DIP A21 (for group 21)
Certification MS - XPL / 06849
Gas Groups I, IIA, IIB, IIC
Ignition Group T6 - 85C
Weight 9,5kg
Packing Dimensions 220x250x220mm
52
FLAME PROOF DEVICES
bAnshee eX 26s sIren s1
this Led siren is suitable for use in fiery mines as well as petrochemical
plants and areas where an explosion-protected device is required. Please
VOLTAgE VOLTAgE
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 110 Vac 220 Vac
duTy CyCLE Continuous rated
CurrENT CONSuMPTION* 110V - 2.6A 220V - 2.1A
SOuNd OuTPuT 122 dB (A) at 1m
SOuNd FrEquENCy 1 600Hz
APP. rANgE 1 500m in still air on open field
CLASSIFICATION Exd I / IIC 150
CErTIFICATION MS - XPL / 06849
gAS grOuPS I, IIA, IIB, IIC
IgNITION grOuP T6 - 85C
WEIgHT 13kg
PACkINg dIMENSIONS 220x250x220mm
* start-up current x 6
53
Flame Proof Devices
Banshee EX 26D Siren S1
is required. Please ensure that the unit equipped with the correct
flameproof cable gland. The unit consists of a 304 type stainless steel
housing with a M20 cable entry, a stainless steel nose cone and a unique
screw on lid for cable connection.
Voltage Voltage
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 110 Vac 220 Vac
Duty Cycle Continuous (thermal cut out protection)
Current Consumption* 110V - 4A 220V - 3A
Sound Output 121 dB (A) at 1m
Sound Frequency 370 / 660Hz
App. Range 2 000m in still air on open field
Motor Brush motor with roller bearings - 4 000 rpm
Classification Exd I / IIC 150
Certification MS - XPL / 06849
Gas Groups I, IIA, IIB, IIC
Ignition Group T6 - 85C
Weight 16kg
Packing Dimensions 200x250x200mm
* Start-up current x 6
54
FLAME PROOF DEVICES
bAnshee eX mULtI soUnDer & beACon LeD
Combo s1
this electronic sounder and Led beacon combination unit is suitable for
use in fiery mines as well as petrochemical plants and areas where an
FLAME PrOOF dEVICES - BANSHEE EX MuLTI SOuNdEr & BEACON LEd COMBO S1
explosion-protected device is required. the unit consits of a 304 type
stainless steel housing with a m20 cable entry, a stainless steel nose cone
and a unique screw on lid for cable connection.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous rated
CurrENT CONSuMPTION The amps vary from 80 - 250 mA depending on sound selected
COLOur Red, Amber, Blue and Green
APP rANgE 800m in still air on open field
LIgHT SOurCE 24 Hi-Bright LEDs
SOuNd OuTPuT 113 dB (A) at 1m
CLASSIFICATION Exd I / IIC 150 220 V - 2.1 A
CErTIFICATION MS - XPL / 06849
gAS grOuPS I, IIA, IIB, IIC
IgNITION grOuP T6 - 85C
WEIgHT 11,3kg
PACkINg dIMENSIONS 320x220x220mm
55
Flame Proof Devices
Banshee EX Multi Sounder & Beacon Xenon Combo
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous rated
Sound Output 113 dB (A) at 1m
Colour Amber, Red, Blue and Green (other colours available on request)
Light Source Xenon Tube
App. Range 800m in still air on an open field
Current Consumption The amps vary from 80 - 250mA depending on the sound selection
Classification Exd I / IIC 150 DIP A21 (for group 21)
Certification MS - XPL / 06849
Gas Groups I, IIA, IIB, IIC
Ignition Group T6 - 85C
Weight 11,3kg
Packing Dimensions 200x250x200mm
56
FLAME PROOF DEVICES
bAnshee eX mono sIren & beACon LeD/Xenon
Combo s1
this mono siren and Led beacon combination unit is suitable for use
in fiery mines as well as petro chemical plants and areas where an
FLAME PrOOF dEVICES - BANSHEE EX MONO SIrEN & BEACON LEd/XENON COMBO S1
explosion-protected device is required. Please ensure that the unit is
equipped with the correct flameproof cable gland. the unit consists of
a steel nickel plated housing with 3 x m20 cable entries, a stainless steel
nose cone and a unique screw on lid for cable connection.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE 1 min on - 8min off
CurrENT CONSuMPTION* 12V - 10A 24V - 6A 110V - 2A 220V - 1,5A
COLOur Amber, Red, Blue and Green (other colours available on request)
LIgHT SOurCE Xenon Tube / 24 x LEDs
SOuNd OuTPuT App Range 1000 m in still open field
LIgHT OuTPuT 5 Joule
CLASSIFICATION Exd I / IIC 150 DIP A21 (for group 21)
CErTIFICATION MS - XPL / 06849
gAS grOuPS I, IIA, IIB, IIC
IgNITION grOuP T6 - 85C
WEIgHT 11,3kg
PACkINg dIMENSIONS 200x250x200mm
* start-up current x 8
57
Flame Proof Devices
Banshee Ex Duplo Siren & Beacon Xenon / LED Combo S1
This duplo siren and Xenon / LED beacon combination unit is suitable
for use in fiery mines as well as petro chemical plants and areaswhere
Flame Proof Devices - Banshee Ex Duplo Siren & Beacon Xenon / LED Combo S1
Voltage Voltage
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle 10 hours Continuous rated
Sound Output 116 dB(A) at 1m
Sound Frequency 800-2 400Hz
App. Range 1 000m in still air on an open field
Current Consumption* The amps vary from 1 - 2A depending on the sound selection
Classification Exd I / IIC 150 DIP A21 (for group 21)
Certification MS - XPL / 06849
Gas Groups I, IIA, IIB, IIC
Ignition Group T6 - 85C
Weight 11,3kg
Packing Dimensions 200x250x200mm
* Start-up current x 8
58
FLAME PROOF DEVICES
bAnshee eX LIght s1
the ex Light s1 is suitable for use in fiery mines, petro chemical plants,
underground coal mining machinery and areas where an explosion-
*other voltage
VOLTAgE VOLTAgE avaliable on request
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 220 Vac
CLASSIFICATION Exd I 150C Ex d IIC T4 Gb
CErTIFICATION SAEX MS/11-110X
gAS grOuPS I, IIC
LIgHT SOurCE 4 x Super Bright LEDs (5W) 7 x Super Bright LEDs (7W)
LIgHT OuTPuT 49 LUX at 5m 118 LUX at 5m
CurrENT CONSuMPTION 28mA 72mA
IgNITION grOuP T6 - 85C
WEIgHT 6kg
PACkINg dIMENSIONS 270x200x230mm
59
Flame Proof Devices
Banshee EX Floodlight s1
*other voltage
Voltage Voltage avaliable on request
12 V 220 V
All dimensions in mm
Specifications
Voltage 12 Vdc 220 Vac
Colours Red, Green and White
Classification Exd I 150C Mb Ex d IIC T4 Gb
Certification SAEX MS/11-402X
Light Sources 12 Super Bright LEDS (12W) 12 Super Bright LEDS (12W)
Light Output 125 LUX at 5m 190 LUX at 5m
CUrrent consumption 97mA 111mA
Gas Groups I, IIC
Ignition Group T6 - 85C
Weight 11kg
Packing Dimensions 270x200x230mm
60
FLAME PROOF DEVICES
bAnshee eX termInAL boX s1
All dimensions in mm
SPECIFICATIONS
TyPE EX Terminal Box S1
CLASSIFICATION Exd I 150C Ex d IIC T4 Gb
CErTIFICATION SAEX MS/11-349
gAS grOuPS I, IIA. IIB, IIC
IgNITION grOuP T6 - 85C
WEIgHT 1.7kg
PACkINg dIMENSIONS 121x117x130mm
61
Combination Units
Banshee Mono combo ml & MX
The Mono siren with all its features is used with a flashing beacon
mounted on the back cover. This unit is designed for applications
Combination Units - Banshee Mono combo Ml & Mx
where an audible and visual signal device is required. The beacon starts
flashing when the siren is supplied with power. With a separate supply
through the second cable entry the beacon can be connected to operate
independently from the siren.
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle 1 minute on - 8 mintues off
Sound Output 113 dB(A) at 1m
Sound Frequency 950-1 200Hz
App. Range 1 000m in still air on an open field
Current Consumption* 12V - 10A 24V - 6A 110V - 2A 220V - 1.5A
Light Source 24 Hi-bright LEDs / Xenon tube - 5 Joule
IP Rating IP 65
Weight 2.5kg
Packing Dimensions 140x140x270 mm
* Start-up current x 8
62
COMBINATION UNITS
bAnshee DUPLo Combo DL & DX
the duplo siren with all its features is used with a flashing beacon
mounted on the back cover. this unit is designed for applications
VOLTAgE VOLTAgE
- 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 110 Vac 220 Vac
duTy CyCLE 10 Hours continuous rated
SOuNd OuTPuT 116 dB(A) at 1m
SOuNd FrEquENCy 950-1 200Hz
APP. rANgE 1 000m in still air on an open field
MOTOr Brush motor with double roller bearing - 8 000 rpm
CurrENT CONSuMPTION* 24Vdc - 6A 110V - 2.5A 220 V - 1.5A
LIgHT SOurCE 24 Hi-bright LEDs / Xenon tube
IP rATINg IP 65
WEIgHT 2.5kg
PACkINg dIMENSIONS 140 x140x270mm
* start-up current x 8
63
Combination Units
Banshee Flashtone Excel lite
The Banshee Flashtone Excel Lite combines the modern aesthetics of the
Banshee Excel sounder with a very bright and efficient Xenon beacon
Electronic sounders - Banshee flashtone Excel lite
Voltage Voltage
9-30 Vdc 110 VAc
220 Vac -
All dimensions in mm
Specifications
Voltage 9 30 Vdc 110Vac 220Vac
Colours Amber, Yellow, Red, Green and Blue
Duty Cycle Continuous
Sound Output 110dB
Sound Frequency 420 - 2 900Hz
App. Range 800m in still air on an open field
Current Consumption 12V - 90mA 24V - 40mA
IP Rating IP 45 Standard base IP 66 Deep base
Weight 220g
Packing Dimensions 100x100x100mm
64
ELECTRONIC SOUNDERS
bAnshee mULtItone eXCeL
VOLTAgE VOLTAgE
9-30 VdC 110 VdC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 9 30 Vdc 110Vac 220Vac
duTy CyCLE Continuous
SOuNd OuTPuT 110dB
SOuNd FrEquENCy 420 - 2 900Hz
APP. rANgE 800m in still air on an open field
CurrENT CONSuMPTION Max. 40mA
IP rATINg IP 45 Standard base IP 66 Deep base
WEIgHT 200g
PACkINg dIMENSIONS 100x100x100mm
65
Electronic Sounders
Banshee cybertone
A durable panel mount sounder with the variable moving coil diaphragm
sound capsule. This sounder will outlast most other panel mount
electronic sounders - Banshee Cybertone
sounders. The 4 sounds can be selected, depending on the way the model
is connected. A connecting diagram is included with each model.
Voltage Voltage
12 Vdc 24 VAC/dc
32 VAC/dc 110/220 VAC
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous rated
Sound Output 91 dB(A) at 1m
Sound Frequency 2500 - 3000Hz
App. Range 400m in still air on an open field
Sound select 4 sounds selectable
Current Consumption 12V - 30mA 24V - 25mA 32V - 25mA 110/220 V on request
IP rating IP 45
Weight 64g
Packing Dimensions 52x47x47mm
66
ELECTRONIC SOUNDERS
bAn F1 soUnDer
VOLTAgE VOLTAgE
10-30 VdC 24 VAC
110/220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 24 Vac 110/220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 100 dB(A) at 1m
SOuNd FrEquENCy 340 / 2 400Hz (depends on tone selection)
SOuNd SELECT 10 user selectable tones with a 2 stage alarm option
APP. rANgE 300m in still air on an open field
CurrENT CONSuMPTION 10-30V - 25mA 24V - 40mA 110/220V - 30mA
IP rATINg IP 55 - can be increased to IP 56 with WR kit
WEIgHT 260g
PACkINg dIMENSIONS 110x110x65mm
67
Beacons
Banshee LED & Xenon Beacons
Available in a Xenon and LED version. The units are designed to produce
approximately 45 to 65 flashes per minute and this is determined by a
beacons - Banshee LED & Xenon Beacons
Voltage Voltage
12 Vdc 24 Vdc
110/220 Vac -
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110/220 Vac
Colour LED Red, Amber and Green
Colour Xenon Red, Amber, Green and Blue
Light source LED 24 Hi-bright LEDs
Light source Xenon Xenon tube - 5 Joules
flash Rate LED - approximately 50 / min; Xenon - 45 to 60/ min
Current Consumption LED
Current Consumption 12V - 180mA 24V - 120mA 110/220V - 70mA
Xenon
IP rating IP 65
Weight 475g
Packing Dimensions 105x130x130mm
68
BEACONS
sIrenCo beACons
the low current sirenco xenon beacons combine excellent efficiency with
high light output. the interchangeable polycabonate lenses are available
VOLTAgE VOLTAgE
12 VdC 24 VdC
110/220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110/220 Vac
COLOurS Red, Amber, Blue or Green
LIgHT SOurCE XENON Xenon tube
FLASH rATE Xenon - 45 to 60 p/min
CurrENT CONSuMPTION 12V - 115mA 24V - 115mA 110/220V - 115mA
IP rATINg IP 44
WEIgHT 130g
PACkINg dIMENSIONS 77x90x90mm
69
Beacons
Sirenco Xenon Beacon with Magnetic Base
Available in a single, double and triple flash version. The unit comes
standard with a twirly cord that fits in the lighter socket of the vehicle
beacons - sirenco xenon beacon with magnetic base
Voltage Voltage
12-80 Vdc -
All dimensions in mm
Specifications
Voltage 12 - 80 Vdc
Colour Red, Amber, Green and Blue
Light source Xenon tube - 1.5 Joules
flash Rate Xenon - 45 to 80 flashes p/min (depending on setting)
Current Consumption 0.25A - Single 0.5A - Double 0.5A - Triple
IP rating IP 66
Weight 850g
Packing Dimensions 130x130x130mm
70
BEACONS
sIrenCo rotAtIng beACon wIth mAgnetIC bAse
the unit comes standard with a twirly cord that fits in the lighter socket
of the vehicle and a magnetic base.
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc
COLOurS Red, Amber, Blue or Green
LIgHT SOurCE Halogen Bulb
FLASH rATE 105 p/min
CurrENT CONSuMPTION 12V - 4A 24V - 3A
IP rATINg IP 66
WEIgHT 980g
PACkINg dIMENSIONS 180x180x180mm
71
Emergency Flare
Sirenco Emergency Flare
This 16 LED flare has 9 flash patterns. It is shock resistant, waterproof and
durable. The magnet allows the unit to be attached to metal surfaces.
Emergency Flare - Sirenco Emergency Flare
The emergency flare can be recharged using a 12V car charger or a 220V
wall charger (supplied with unit).
Voltage Voltage
Rechargeable
12 Vdc / 220 Vac
battery
All dimensions in mm
Specifications
Voltage Lithium Ion 700mAH - 3.7V Battery 5 Years Battery life
Colours Red, Amber, Blue, Green, White & Yellow
Light Source 16 High Bright Long Life LEDs
App. Range 800m
Flash Patterns Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue 14 hrs, Steady on 5
hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs
Charger Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit).
Unit will be fully charged within 3 hours
IP Rating IP67, Unit can be submerged down to 2m and can float on water. Durable construction.
Weight 285g
Packing Dimensions 110x110x80mm
72
EMERGENCY FLARE
sIrenCo emergenCy FLAre 6 PACk
VOLTAgE VOLTAgE
rECHArgEABLE
12 VdC / 220 VAC
BATTEry
All dimensions in mm
SPECIFICATIONS
VOLTAgE Lithium Ion 700mAH - 3.7V Battery 5+ Years Battery life
COLOurS Red, Amber, Blue, Green, White & Yellow
LIgHT SOurCE 16 High Bright Long Life LEDs
APP, rANgE 800m
FLASH PATTErNS Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue
14 hrs, Steady on 5 hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs
CHArgEr Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit)
Unit will be fully charged within 3 hours
IP rATINg IP67, Unit can be submerged down to 2m and can float on water. Durable construction.
WEIgHT 3.1kg (285g each)
PACkINg dIMENSIONS 450x370x75mm
73
IS Portable Beacon
Sirenco IS Portable Beacon
coal mines. The uniqueness of this unit is its durability and versatility as
it is a rechargeable mobile IS unit. This unit has 16 high bright LEDs with
up to 60 hours of flash time (depending on mode), and has 9 selectable
flash modes. It is shock resistant and waterproof. The magnet allows
the portable beacon to be attached to metal surfaces. The emergency
portable beacon is charged within 8 hours and can be recharged using a
12V car charger or a 220V wall charger (supplied with unit).
Voltage Voltage
Rechargeable
12 Vdc / 220 Vac
battery
All dimensions in mm
Specifications
Type Sirenco IS Portable Beacon
Classification 60cm EXi9 l 150C Ma
Certification SAEx M/11-370X, certified for surface and underground application
type IS II
Ex rating Exia 1 150C Ma
Weight 285g
Packing Dimensions 110x110x80mm
SIzE SIzE
40ML CANISTEr 100ML CANISTEr
SIzE SIzE
135ML CANISTEr 300ML CANISTEr
All dimensions in mm
SPECIFICATIONS
POWEr SuPPLy Gas power air canister
SOuNd OuTPuT 40ml Can: 115dB 100ml Can: 115dB 135ml Can: 127dB 300ml Can: 127dB
BLASTS PEr CANISTEr 40ml Can: 100ml Can: 135ml Can: 300ml Can:
20 short blasts 50 short blasts 60 short blasts 120 short blasts
TrANSPOrT INFOrMATION COMPRESSED GAS, NON FLAMMABLE, IATA/IMDG CLASS 2.2
WEIgHT 40ml Can: 80g 100ml Can: 160g 135ml Can: 244g 300ml Can: 444g
PACkINg dIMENSIONS 40ml Can: 100ml Can: 135ml Can: 300ml Can:
155x60x60mm 200x60x60mm 215x70x70mm 305x70x70mm
dIrECTIONS To attach the horn to the canister, place the horn on top of the canister and screw clockwise. Avoid cross
threading. Do not over tighten. The canister must be held in an upright position with forefinger pressed
firmly on the button.
CAuTION Contents under pressure. Do not tilt or invert canister during use. The safety device creates a loud noise. Do
not emit sound next to ears. Keep out of reach of children. Do not puncture, incinerate or use near open
flame. Contains non flammable Freon gas. Unit must be stored in temperatures not exceeding 49C.
gAS CErTIFICATE MSDS Certificate available on request
75
other units
Megaphones
Option 1 option 2
other units - Megaphones
Specifications
Power Source 14 VdC 8 X UM-2 cells or carPlease
battery visit
our website for all the latest information,
Voice Range 400m www.kama.co.za.
Power output 16W rated / 20W rated
Battery Life 8 - 10 hours
Mircrophone Directional
Weight 2.2kg
Packing Dimensions Horn dia. 220mm, Length 370mm
All dimensions in mm
Voltage
230 Vac
Specifications
Description Factory time switch box complete with time switch with 50 programs in an IP 56 housing
Consumption 16 Amp
weight 950g
76
SON F1 RANGE
e2s son F1 soUnDer
VOLTAgE VOLTAgE
10-30 VdC 24 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 24 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 100 dB(A) at 1m
SOuNd FrEquENCy 340 / 2 400Hz (Depends on tone selection)
SOuNd SELECT 10 user selectable tones with a 2 stage alarm option
CurrENT CONSuMPTION* 10-30V - 25mA 24V - 40mA
IP rATINg IP 55 - can be increased to IP 56 with WR kit
WEIgHT 260g
PACkINg dIMENSIONS 110x110x65mm
77
A range - sounder & combination units
E2S A100 Sounder & AL100 Combo
The E2S range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. The sound output
A range - sounder & combination units - E2s A100 sounder & al100 Combo
Voltage Voltage
10-30 Vdc 24 Vac
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 10-30 Vdc 24 Vac 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 104 dB(A) at 1m
Sound Frequency 340 / 2 400Hz (depends on tone selection)
Sound Select 32 user selectable tones with a 3 stage alarm option
App. Range 300m in still air on an open field
Current Consumption 10-30V - 25mA 24V - 40mA 110V - 13mA 220V - 13mA
Current Cons. (Combo) 12V - 525mA 24ac - 405mA 110V - 120mA 220 V - 65 mA
Lens Colour Red, Amber, Green or Blue
IP Rating IP 66 - Sounders IP 56 - Combo
Weight Sounder - 370g Combo - 570g
Packing Dimensions 110x110x90mm - Sounder 190x110x190mm - Combo
78
A RANGE - SOUNDER & COMBINATION UNITS
e2s A105 soUnDer & AL105 Combo
the e2s range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. the sound output
A rANgE - SOuNdEr & COMBINATION uNITS - E2S A105 SOuNdEr & AL105 COMBO
can be decreased by means of a volume control. standard colour is red,
but these units are also available in grey and white.
VOLTAgE VOLTAgE
10-30 VdC 24 VAC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 24 Vac 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 112 dB(A) at 1m
SOuNd FrEquENCy 340 / 2 400Hz (depends on tone selection)
SOuNd SELECT 32 user selectable tones with a 3 stage alarm option
APP. rANgE 500m in still air on an open field
CurrENT CONSuMPTION 10-30V - 25mA 24V - 40mA 110V - 20mA 220V - 15mA
CurrENT CONS. (COMBO) 12V - 525mA 24V - 275mA 110V - 120mA 220V - 65mA
LENS COLOur Red, Amber, Green or Blue
IP rATINg IP 66 - Sounder IP 56 - Combo
WEIgHT 1kg - Sounder 1.2kg - Combo
PACkINg dIMENSIONS 150x150x140mm - Sounder 150x220x150mm - Combo
79
A range - sounder & combination units
E2S A112 Sounder & AL112 Combo
The E2S range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. The sound output
A range - sounder & combination units - E2S A112 Sounder & AL112 Combo
Voltage Voltage
10-30 Vdc 24 Vac
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 10-30 Vdc 24 Vac 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 119 dB(A) at 1m
Sound Frequency 340 / 2400Hz (Depends on tone selection)
Sound Select 45 user selectable tones with a 3 stage alarm option
App. Range 800m in still air on an open field
Current Consumption 10-30V - 200mA 24V - 500mA 110V - 100mA 220V - 60mA
Current Cons. (Combo) 12V - 700mA 24V - 450mA 110V - 170mA 220V - 95mA
Lens Colour Red, Amber, Green or Blue
IP Rating IP 66 - Sounder IP 56 - Combo
Weight 2.1kg - Sounder 2.3kg - Combo
Packing Dimensions 200x200x160mm - Sounder 200x160x260mm - Combo
80
A RANGE - SOUNDER & COMBINATION UNITS
e2s A121 soUnDer & AL121 Combo
the e2s range of sounder and combination units have been designed to
perform at maximum capacity for as long as required. the sound output
A rANgE - SOuNdEr & COMBINATION uNITS - E2S A121 SOuNdEr & AL121 COMBO
can be decreased by means of a volume control. standard colour is red,
but these units are also available in grey.
VOLTAgE VOLTAgE
10-30 VdC 24 VAC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 24 Vac 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 126 dB(A) at 1m
SOuNd FrEquENCy 340 / 2400Hz (Depends on tone selection)
SOuNd SELECT 45 user selectable tones with a 3 stage alarm option
APP. rANgE 1 000m in still air on an open field
CurrENT CONSuMPTION 10-30V - 950mA 24V - 1 000mA 110V - 240mA 220V - 120mA
CurrENT CONS. (COMBO) 10-30V - 1 450mA 24V - 1 200mA 110V - 310mA 220V - 155mA
LENS COLOur Red, Amber, Green or Blue
IP rATINg IP 66 - Sounder IP 56 - Combo
WEIgHT 2.7kg - Sounder 2.9kg - Combo
PACkINg dIMENSIONS 220x200x220mm - Sounder 220x280x200mm - Combo
81
A RANGE - SOUNDER & COMBINATION UNITS
e2s A141 soUnDer
VOLTAgE VOLTAgE
24 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 141 dB(A) at 1m
SOuNd FrEquENCy 340 / 2 900Hz (depends on tone selection)
SOuNd SELECT 45 user selectable tones with a 3 stage alarm option
APP. rANgE 3 000m in still air
CurrENT CONSuMPTION 24V - 13.2A 110V - 4.2A 220V - 1.95A
IP rATINg IP 65
WEIgHT 14kg
82
EXPLOSION PROOF DEVICE
e2s eX 05 beACon
the e2s range of ex beacons are best suited for hazardous robust
applications. suitable for zone 1, 2, 21 & 22 and gas groups iic. six lens
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous Rated
COLOurS Amber, Red, Yellow, Clear, Blue or Green
LIgHT SOurCE Xenon Tube
LIgHT OuTPuT 5 Joule @ 1Hz
CLASSIFICATION Exd IIA, IIB & IIC T5
CErTIFICATION ATEX / CENELEC / FTZU / IECEx / GOST R
gAS grOuPS IIC
IgNITION grOuP T4 - 135C
IP rATINg IP 67
WEIgHT 2.75kg
PACkINg dIMENSIONS 280x200x200mm
83
Explosion Proof Device
E2S EX 10 Beacon
The E2S range of Ex beacons are best suited for hazardous robust
applications. Suitable for zone 1, 2, 21 & 22 and Gas Groups IIC. Six lens
Explosion Proof Device - E2S EX 10 Beacon
colours available: Red, Yellow, Amber, Blue, Clear and Green. Automatic
synchronisation on multibeacon systems. The units are chromated
and powder coated with good resistance to humidity and salt spray
environments. This is a flame proof unit and should be installed by
suitably qualified persons.
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous Rated
Current Consumption 12V - 1 450mA 24V - 660mA 110V - 250mA 220V - 110mA
Colours Amber, Red, Yellow, Clear, Blue or Green
Light Source Xenon Tube
Light Output 10 Joule @ 1Hz
Classification Exd IIA, IIB & IIC T4
certification ATEX / CENELEC / FTZU / IECEx / GOST R
Gas Groups IIC
Ignition Group T4 - 135C
IP Rating IP 67
Weight 2.75kg
Packing Dimensions 280x200x200mm
84
EXPLOSION PROOF DEVICE
e2s eX 15 beACon
the e2s range of ex beacons are best suited for hazardous robust
applications. suitable for zone 1, 2, 21 & 22 and gas groups iic. six lens
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous Rated
CurrENT CONSuMPTION 12V - 1 450mA 24V - 660mA 110V - 250mA 220V - 110mA
COLOurS Amber, Red, Yellow, Clear, Blue or Green
LIgHT SOurCE Xenon Tube
LIgHT OuTPuT 10 Joule @ 1Hz
CLASSIFICATION Exd IIA, IIB & IIC T4
CErTIFICATION ATEX / CENELEC / FTZU / IECEx / GOST R
gAS grOuPS IIC
IgNITION grOuP T4 - 135C
IP rATINg IP 67
WEIgHT 2.75kg
PACkINg dIMENSIONS 280x200x200mm
85
Explosion Proof Device
E2S EX 1105 Combo
The E2S range of Ex combos are best suited for hazardous robust
applications. Suitable for zone 1, 2, 21 & 22 and Gas Group IIB. Six
Explosion Proof Device - E2S EX 1105 Combo
lens colours available: Red, Yellow, Amber, Blue, Clear and Green.
Automatic synchronisation on multi beacon systems. The units are
chromated and powder coated with good resistance to humidity
and salt spray environments. This is a flame proof unit and should be
installed by suitably qualified persons.
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous Rated
Current Consumption 12V - 945mA 24V - 520mA 110V - 280mA 220V - 111mA
Sound Output 117 dB(A) at 1m
Sound Frequency 420 / 2 900Hz (Depends on tone selection)
Sound Select 32 user selectable tones
colours Amber, Red, Yellow, Clear, Blue or Green
Light Source Xenon Tube
Light Output 5 Joule @ 1Hz
Classification Exd IIA, IIB & IIC T4
Certification ATEX / CENELEC / FTZU / IECEx / GOST R
Gas Group IIB
Ignition Group T4 - 135C
IP rating IP 67
Weight 2.75kg
Packing Dimensions 400x200x200mm
86
EXPLOSION PROOF DEVICE
e2s eX 11 soUnDer
the e2s ex sounders can be used at petro chemical plants, fiery mines
and where ex is required. the unit is chromated and powder coated with
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous Rated
CurrENT CONSuMPTION 12V - 195mA 24V - 250mA 110V - 110mA 220V - 56mA
SOuNd OuTPuT 117 dB(A) at 1m
SOuNd FrEquENCy 420 / 2 900Hz (depends on tone sellection)
SOuNd SELECT 32 users selectable tones with a 3 stage option
APP. rANgE 800m
CLASSIFICATION Exd IIA, IIB & IIC T4
CErTIFICATION ATEX / CENELEC / FTZ4 / IECEX / G0ST R
gAS grOuPS IIC
IgNITION grOuP T4 - 135C
IP rATINg IP 67
WEIgHT 3.4kg
PACkINg dIMENSIONS 320x230x230mm
87
Explosion Proof Device
E2S EX 12 Sounder
The E2S Ex Sounders can be used at petro chemical plants, fiery mines
and where Ex is required. The unit is chromated and powder coated with
Explosion Proof Device - E2S EX 12 Sounder
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous Rated
Current Consumption 12V - 850mA 24V - 800mA 110V - 180mA 220V - 90mA
Sound Output 123 dB(A) at 1m
Sound Frequency 420 / 2 900Hz (Depends on tone selection)
Sound Select 32 user selectable tones with a 3 stage alarm option
App. Range 1 000m
ip Rating IP 67
Classification Exd IIA, IIB & IIC T4
Certification ATEX / CENELEC / FTZ4 / IECEX / G0ST R
Gas Group IIA, IIB & IIC
Ignition Group T4 - 135C
Weight 3.4kg
Packing Dimensions 400x200x200mm
88
EXPLOSION PROOF DEVICE
e2s eX breAk gLAss CALL PoInt
the e2s ex break glass manual call points are approved for zones: 1, 2,
21 & 22. For the control of hazardous areas, fire and gas alarm systems.
VOLTAgE
24 VdC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 VDC
duTy CyCLE Continuous
HOuSINg MATErIAL Marine grade copper free LM6 Aluminium
COLOur Red
CLASSIFICATION II 2G Ex e d mb IIC T4 Gb
CErTIFICATION Atex: Sira 09ATEX3286X
gAS grOuPS Zones: 1, 2, 21, 22
IgNITION grOuP T4-135C
IP rATINg IP 66
WEIgHT 800g
PACkINg dIMENSIONS 112x76x100mm
89
Explosion Proof Device
E2S EX PUSH BUTTON CALL POINT
The E2S EX Push Button manual call points are approved for zones: 1, 2,
21 & 22. For the control of hazardous areas, fire and gas alarm systems.
Explosion Proof Device - E2s ex PUSH BUTTON CALL POINT
Available with and without monitoring & resistors. All versions are
certified to ATEX standards.
Voltage
24 VDC
All dimensions in mm
All dimensions in mm
Specifications
Voltage 24 VDC
Duty Cycle Continuous
HOUSING MATERIAL Marine grade copper free LM6 Aluminium
Colour Red
Classification II 2G Ex e d mb IIC T4 Gb
certification Atex: Sira 09ATEX3286X
Gas Groups Zones: 1, 2, 21, 22
Ignition Group T4-135C
IP Rating IP 66
Weight 800g
Packing Dimensions 112x76x100mm
90
EXPLOSION PROOF DEVICE
e2s eX tooL reset CALL PoInt
the e2s ex tool reset manual call points are approved for zones: 1, 2,
21 & 22. For the control of hazardous areas, fire and gas alarm systems.
VOLTAgE
24 VdC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 VDC
duTy CyCLE Continuous
HOuSINg MATErIAL Marine grade copper free LM6 Aluminium
COLOur Red
CLASSIFICATION II 2G Ex e d mb IIC T4 Gb
CErTIFICATION Atex: Sira 09ATEX3286X
gAS grOuPS Zones: 1, 2, 21, 22
IgNITION grOuP T4-135C
IP rATINg IP 66
WEIgHT 800g
PACkINg dIMENSIONS 112x76x100mm
91
IS Range
E2S IS Minialarm Sounder
Voltage Voltage
16 - 28 Vdc via Zener barrier
All dimensions in mm
Specifications
Voltage 16-28 Vdc (via Zener barrier)
Duty Cycle Continuous Rated
Current Consumption 25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier
Sound Output 100 dB(A) at 1m
Sound Frequency 340 / 2900Hz (Depends on tone selection)
Sound Select 49 user selectable tones with a 3 stage alarm
App. Range 300m
Classification Ex II 1G EEx ia IIC T4
certification 05 ATEX 2084X
Gas Groups Zone 0, 1 & 2, Gas Group IIC
Ignition Group T4 - 135C
IP Rating IP 65
Weight 453g
Packing Dimensions 100x100x100mm
92
IS RANGE
e2s Is mInIALert Combo
the e2s is range is used only for intrinsically safe applications. this is
combination unit is ideal for areas where an audible and visual alarm is
VOLTAgE VOLTAgE
16 - 28 VdC VIA zENEr BArrIEr
All dimensions in mm
SPECIFICATIONS
VOLTAgE 16-28 Vdc (via Zener barrier)
duTy CyCLE Continuous Rated
CurrENT CONSuMPTION 48mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
LIgHT SOurCES 6 high intensity LEDs
LENS COLOur Red, Amber, Green, Blue and Clear
SOuNd OuTPuT 100 dB(A) at 1m
SOuNd FrEquENCy 340 / 2 900Hz (Depends on tone selection)
SOuNd SELECT 49 user selectable tones with a 3 stage alarm
APP. rANgE 300m
CLASSIFICATION Ex II 1G EEx ia IIC T4
CErTIFICATION 05 ATEX 2084X
gAS grOuPS Zone 0, 1 & 2, Gas Group IIC
IgNITION grOuP T4 - 135C
IP rATINg IP 65
WEIgHT 750g
PACkINg dIMENSIONS 120x100x100mm
93
IS Range
E2S IS Minialite Beacon
The E2S Intrinsically Safe beacon has an array of 6 high intensity LEDs.
Prismatic lens optimises LED effectiveness. Two flash modes (2Hz and
IS Range - E2S IS Minialite Beacon
Voltage Voltage
16 - 28 Vdc via Zener barrier
All dimensions in mm
Specifications
Voltage 16-28 Vdc (via Zener barrier)
Duty Cycle Continuous rated
Current Consumption 25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
Colour Red, Amber, Blue & Green
Light Source 6 High Intensity LEDs
Classification Ex II 1G EEx ia IIC T4
certification 05 ATEX 2084X
Gas Groups Zone 0, 1 & 2, Gas Group IIC
Ignition Group T4 - 135C
IP Rating IP 65
Weight T4 - 135C
Packing Dimensions 100x100x100mm
94
IS RANGE
e2s Is A105 soUnDer
the e2s is sounder range is used only for intrinsically safe applications.
all the features of the a105 sounder but the added advantages of is.
VOLTAgE VOLTAgE
16 - 28 VdC VIA zENEr BArrIEr
All dimensions in mm
SPECIFICATIONS
VOLTAgE 16-28 Vdc (via Zener barrier)
duTy CyCLE Continuous rated
CurrENT CONSuMPTION 25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
SOuNd OuTPuT 105 dB(A) at 1m
SOuNd FrEquENCy 340 / 2 900Hz (Depends on tone selection)
SOuNd SELECT 49 user selectable tones with a 3 stage alarm option
APP. rANgE 500m
CLASSIFICATION Ex II 1G EEx ia IIC T4
CErTIFICATION 05 ATEX 2084X
gAS grOuPS Zone 0, 1 & 2, Gas Group IIC
IgNITION grOuP T4 - 135C
IP rATINg IP 66
WEIgHT 750g - Sounder 1.2kg - Combo
PACkINg dIMENSIONS 150x150x150mm
95
IS Range
E2S IS L101 Beacon
The E2S Intrinsically Safe beacon has an array of 6 high intensity LEDs.
Prismatic lens optimises LED effectiveness. Two flash modes (2Hz and
IS Range - E2S IS L101 Beacon
Voltage Voltage
16 - 28 Vdc via Zener barrier
All dimensions in mm
Specifications
Voltage 16-28 Vdc (via Zener barrier)
Duty Cycle Continuous rated
Current Consumption 25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)
Colour Red, Amber, Blue & Green
Light Source 6 LEDs
Classification Ex II 1G EEx ia IIC T4
certification SIRA 04 ATEX 2302X / IECEx SIR 04.0039X
Gas Groups Zone 0, 1 & 2, Gas Group IIC
Ignition Group T4 - 135C
IP Rating IP 66
Weight 645g
Packing Dimensions 110x110x100mm
96
IS RANGE
e2s Is breAk gLAss CALL PoInt
the e2s is break glass manual call points are approved for zones: 0, 1, 2,
21 & 22 requiring intrinsically sale equipment for the control of fire and
VOLTAgE
24 VdC
All dimensions in mm
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 VDC
duTy CyCLE Continuous
HOuSINg MATErIAL Marine grade copper free LM6 Aluminium
COLOur Red
CLASSIFICATION II 1G Ex ia IIC T4 Ga
CErTIFICATION Atex: Sira 09ATEX2287X
gAS grOuPS Zones: 0, 1, 2, 21, 22
IgNITION grOuP T4-135C
IP rATINg IP 66
WEIgHT 800g
PACkINg dIMENSIONS 112x76x100mm
97
IS Range
E2S IS PUSH BUTTON CALL POINT
The E2s IS Push Button manual call points are approved for zones: 0, 1, 2,
21 & 22 requiring intrinsically sale equipment for the control of fire and
IS RANGE - E2s IS PUSH BUTTON CALL POINT
gas alarm systems. Available with and without monitoring & resistors. All
versions are certified to ATEX standards.
Voltage
24 VDC
All dimensions in mm
Specifications
Voltage 24 VDC
Duty Cycle Continuous
HOUSING MATERIAL Marine grade copper free LM6 Aluminium
Colour Red
Classification II 1G Ex ia IIC T4 Ga
certification Atex: Sira 09ATEX2287X
Gas Groups Zones: 0, 1, 2, 21, 22
Ignition Group T4-135C
IP Rating IP 66
Weight 800g
Packing Dimensions 112x76x100mm
98
IS RANGE
e2s Is tooL reset CALL PoInt
the e2s is tool reset manual call points are approved for zones: 0, 1, 2,
21 & 22 requiring intrinsically sale equipment for the control of fire and
VOLTAgE
24 VdC
All dimensions in mm
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 VDC
duTy CyCLE Continuous
HOuSINg MATErIAL Marine grade copper free LM6 Aluminium
COLOur Red
CLASSIFICATION II 1G Ex ia IIC T4 Ga
CErTIFICATION Atex: Sira 09ATEX2287X
gAS grOuPS Zones: 0, 1, 2, 21, 22
IgNITION grOuP T4-135C
IP rATINg IP 66
WEIgHT 800g
PACkINg dIMENSIONS 112x76x100mm
99
Beacons 2
E2S LED Beacons
The E2S LED Beacon can be used for any application where a visual
warning indicator is required. Eight high intensity LEDs with six lens
Beacons 2 - E2S LED Beacons
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Colour LED Red, Amber, Yellow, Clear, Blue & Green
Duty Cycle Continuous rated
Light source 8 Hi-bright LED array @ 2Hz
Current Consumption 12V -150mA 24V - 100mA 110V - 54mA 220V - 27mA
IP Rating IP 66
Weight 200g
Packing Dimensions 100x100x100mm
100
BEACONS 2
e2s Xenon beACons
the e2s xenon beacon can be used for any application where a visual
warning indicator is required. seven lens colours are available.
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vac 110Vac 220 Vac
COLOur LEd Red, Amber, Yellow, Clear, Opal, Blue & Green
duTy CyCLE Continuous Rated
LIgHT SOurCE 5 Joule Xenon @ 1Hz
CurrENT CONSuMPTION 12V - 500mA 24V - 300mA 110V - 70mA 220V - 35mA
IP rATINg IP 66
WEIgHT 200g
PACkINg dIMENSIONS 100x100x100mm
101
Marine Range
E2S MA112 Marine Sounder
The E2S Marine range is best suited for all marine and salt spray
conditions. These high output sounders offer IP 67 protection. Ideal for
Marine Range - E2S MA112 Marine Sounder
Voltage Voltage
10-30 Vdc 24 Vac
110 Vac 220 Vac
181 273
All dimensions in mm
Specifications
Voltage 10-30 Vdc 24 Vac 110 Vac 220 Vac
Duty Cycle Continuous
Current Consumption 10-30V - 200mA 24V - 500mA 110V - 100mA 220V - 60mA
Sound Output 119 dB(A) at 1m
Sound Frequency 300 / 2 400Hz (Depends on tone selection)
Sound Select 45 user selectable tones with a 3 stage alarm option
App. Range 800m in still air on open field
IP Rating IP 67
Weight 3kg
Packing Dimensions 300x200x200mm
102
MARINE RANGE
e2s mA121 mArIne soUnDer
the e2s marine range is best suited for all marine and salt spray
conditions. these high output sounders offer iP 67 protection. ideal for
VOLTAgE VOLTAgE
10-30 VdC 24 VAC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 24 Vac 110 Vac 220 Vac
duTy CyCLE Continuous
CurrENT CONSuMPTION 10-30V - 950mA 24V - 1 000mA 110V - 240mA 220V - 120mA
SOuNd OuTPuT 126 dB(A) at 1m
SOuNd FrEquENCy 300 / 2 900Hz (Depends on tone selection)
SOuNd SELECT 45 user selectable tones with a 3 stage alarm option
APP. rANgE 1 000m in still air on open field
IP rATINg IP 67
WEIgHT 3kg
PACkINg dIMENSIONS 340x220x220mm
103
Marine Range
E2S Marine 5 Beacon
The E2S Marine range is best suited for all marine and salt spray
conditions. These high visibility beacons offer IP 67 protection. Ideal for
Marine Range - E2S Marine 5 Beacon
harsh environments.
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 12 Vdc 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous
colour Red, Amber, Blue & Green
Light source Xenon Tube - 5 Joule @ 1Hz
Current Consumption 12V - 550mA 24V - 300mA 110V - 140mA 220V - 55mA
IP Rating IP 67
Weight 1.48kg
Packing Dimensions 250x200x200mm
104
MARINE RANGE
e2s mArIne 10 beACon
the e2s marine range is best suited for all marine and salt spray
conditions. these high visibility beacons offer iP 67 protection. ideal for
VOLTAgE VOLTAgE
10-30 VdC 24 VAC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous
LENS COLOur Red, Amber, Blue & Green
LIgTH SOurCE Xenon Tube - 10 Joule @ 1Hz
CurrENT CONSuMPTION 12V - 1 145mA 24V - 660mA 110V - 250mA 220V - 125mA
IP rATINg IP 67
WEIgHT 1.48kg
PACkINg dIMENSIONS 250x200x200mm
105
Marine Range
E2S MCA112-05 Marine Combo
The E2S Marine range is best suited for all marine and salt spray
conditions. This high output sounder and beacon combination unit offers
Marine Range - E2S MCA112-05 Marine Combo
IP67 protection. Ideal for harsh environments with high ambient noise
levels.
Voltage Voltage
24 Vdc -
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous
Current Consumption 24V - 150mA 110V - 250mA 220V - 115mA
Colour Red, Blue, Green & Amber
Sound Output 119 dB(A) at 1m
Sound Frequency 340 / 2 900Hz (depends on tone selection)
Sound Select 45 user selectable tones with a 3 stage alarm option
App. Range 800m in still air on open field
Light Source Xenon Tube - 5 Joule @ 1Hz
IP Rating IP 67
Weight 3.5kg
Packing Dimensions 400x200x200mm
106
SON 4
e2s son 4 LeD Combo
the e2s son 4 and Led combos are continuously rated compact
combination sounder and beacon units for fire and security applications
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 24 Vac 110 Vac 220 Vac
duTy CyCLE Continuous
CurrENT CONSuMPTION 12V - 50mA 24Vdc - 50mA 48V - 40mA 24Vac - 60mA 110V - 25mA 220V -
20mA
SOuNd OuTPuT 100 dB(A) at 1m
SOuNd FrEquENCy 340 / 2 900Hz (Depends on tone selection)
SOuNd SELECT 10 user selectable tones with a 3 stage alarm option
APP. rANgE 100m in still air on open field
LIgHT SOurCE 5 High Intensity LEDs @ 2Hz
LENS COLOurS Red, Blue, Green & Amber
IP rATINg IP 66
WEIgHT 400g
PACkINg dIMENSIONS 110x100x100mm
107
Son 4
E2S Son 4 Xenon
The E2S Son 4 and Xenon combos are continuously rated compact
combination sounder and beacons units for fire and security applications
son 4 - E2S Son 4 XEnon
Voltage Voltage
24 Vdc 24 Vac
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 24 Vdc 24 Vac 110 Vac 220 Vac
Duty Cycle Continuous
Current Consumption 24V - 34-80mA 24V - 40-90mA 110V - 35mA 220V - 20mA
Sound Output 104 dB(A) at 1m
Sound Frequency 340 / 2900Hz (depends on tone selection)
Sound Select 32 user selectable tones with a 3 stage alarm option
App. Range 100m in still air on open field
Light Source Xenon Tube - 5 Joule @ 1Hz
Lens Colours Red, Amber, Blue & Green
IP Rating IP 66
Weight 400g
Packing Dimensions 110x100x100mm
108
APPELLO
e2s A105 & AL105 APPeLLo sPeeCh & tone
VOLTAgE VOLTAgE
9-15 VdC 18-30 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 9-15 Vdc 18-30 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 105 dB(A) at 1m
SOuNd FrEquENCy 420 / 1 200Hz (Depends on tone selection)
SOuNd SELECT 10 user selectable tones
APP. rANgE 500m in still air on open field
CurrENT CONSuMPTION 9-15V - 150mA 18-30V - 180mA 110V - 40mA 220V - 20mA
CurrENT CONS (COMBO) 12V - 250mA 24V - 200mA 110V - 80mA 220V - 40mA
IP rATINg IP 66 - Sounder IP 56 - Combo
WEIgHT 1kg - Sounder 1.4kg - Combo
PACkINg dIMENSIONS 150x150x150mm - Sounder 150x150x240mm - Combo
109
appello
E2S A112 & AL112 Appello Speech & Tone
Voltage Voltage
9-15 Vdc 18-30 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 9-15 Vdc 18-30 Vdc 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 112 dB(A) at 1m
Sound Frequency 420 / 1 200Hz (Depends on tone selection)
Sound Select 10 user selectable tones with a 2 stage alarm option
App. Range 800m in still air on open field
Current Consumption 9-15V - 150mA 18-30V - 180mA 110V - 40mA 220V - 20mA
Current Cons (Combo) 12V - 250mA 24V - 200mA 110V - 80mA 220V - 40mA
IP Rating IP 66 - Sounder IP 56 - Combo
Weight 1.2kg - Sounder 2.5kg - Combo
Packing Dimensions 200x200x200mm - Sounder 250x200x200mm - Combo
110
GPH HORNS
e2s gPh 1 sUrFACe moUnt ALArm horn
the e2s gPH Horn range is best suited for all applications where a low
frequency sound is required or a sound distinctly different from a siren or
VOLTAgE VOLTAgE
10-30 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 105 dB(A) at 1m
SOuNd FrEquENCy 60Hz (depends on tone selection)
SOuNd SELECT 3 user selectable tones including a Buzzer tone
APP. rANgE 500m in still air on open field
CurrENT CONSuMPTION 24V - 62mA 110V - 40mA 220V - 50mA
IP rATINg IP 66
WEIgHT 350g
PACkINg dIMENSIONS 120x120x80mm
111
GPH Horns
E2S GPH 2 Flush Mount Alarm Horn
The E2S GPH Horn range is best suited for all applications where a low
frequency sound is required or a sound distinctly different from a siren or
GPH horns - E2S GPH 2 Flush Mount Alarm Horn
electronic sounder.
Voltage Voltage
10-30 Vdc 110 Vac
220 Vac -
All dimensions in mm
Specifications
Voltage 10-30 Vdc 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 105 dB(A) at 1m
Sound Frequency 60Hz (depends on tone selection)
Sound Select 3 user selectable tones including Buzzer tone
App. Range 500m in still air on open field
Current Consumption 10-30V - 62mA 110V - 40mA 220V - 50mA
IP Rating IP 54
Weight 350g
Packing Dimensions 160x160x50mm
112
HOOTRONIC RANGE
e2s hmA121 hootronIC soUnDer
VOLTAgE VOLTAgE
24 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 121 dB(A) at 1m
SOuNd FrEquENCy 50 / 60Hz (Depends on tone selection)
SOuNd SELECT 5 traditional sounds and 3 stages
APP. rANgE 1 000m in still air on open field
CurrENT CONSuMPTION 24V - 375mA 110V - 160mA 220V - 75mA
IP rATINg IP 66
WEIgHT 3kg
PACkINg dIMENSIONS 350x250x250mm
113
Hootronic range
E2S HMCA112 Hootronic Sounder & Beacon Combo
Voltage Voltage
24 Vdc 110 Vac
220 Vac -
All dimensions in mm
Specifications
Voltage 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 112 dB(A) at 1m
Sound Frequency 50 / 60Hz (Depends on tone selection)
Sound Select 5 traditional sounds and 3 stages
App. Range 800m in still air on open field
Light Source 5 Joule @ 1Hz
Lens colours Red, Amber, Yellow, Green, Clear & Blue
Current Consumption 24V - 645mA 110V - 270mA 220V - 130mA
IP Rating IP 66
Weight 3.5kg
Packing Dimensions 400x250x250mm
114
HOOTRONIC RANGE
e2s hA121 hootronIC soUnDer
VOLTAgE VOLTAgE
24 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 110Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 121 dB(A) at 1m
SOuNd FrEquENCy 50 / 60Hz (Depends on tone selection)
SOuNd SELECT 5 traditional sounds and 3 stages
APP. rANgE 1 000m in still air on open field
CurrENT CONSuMPTION 24V - 375mA 110V - 160mA 220V - 75mA
IP rATINg IP 66
WEIgHT 2.7kg
PACkINg dIMENSIONS 220x200x200mm
115
Hootronic range
E2S HAL121 Hootronic Sounder and Beacon Combo
and cost effective way. the range is continuously rated, requires zero
maintenance and signal quality and performance will not degrade with
age. This unit produces the sounds of a siren, bell, hooter
and church bell.
Voltage Voltage
24 Vdc 110 Vac
220 Vac -
All dimensions in mm
Specifications
Voltage 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 121 dB(A) at 1m
Sound Frequency 50 / 60Hz (depends on tone selection)
Sound Select 5 traditional sounds and 3 stages
App. Range 1 000m in still air on open field
Light Source 5 Joule @ 1Hz
Lens colours Red, Amber, Yellow, Opal, Green, Clear & Blue
Current Consumption 24V - 645mA 110V - 270mA 220V - 130mA
IP Rating IP 56
Weight 2.9kg
Packing Dimensions 285x230x230mm
116
SPECTRA BEACONS
sPeCtrA b100sLF stAtUs FILAment beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vac 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp BA 9 (Permanent status beacon)
LIgHT OuTPuT 5W
CurrENT CONSuMPTION 12V - 417mA 24V - 208mA 48V - 104mA 110V - 43mA 220V - 22mA
IP rATINg IP 65
WEIgHT 90g
PACkINg dIMENSIONS 110x100x100 mm
117
SPECTRA BEACONS
sPeCtrA b100FLF FLAshIng FILAment beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vac 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp BA 9 (Flashing Lamp beacon)
LIgHT OuTPuT 5W @ 1Hz
CurrENT CONSuMPTION 12V - 500mA 24V - 250mA 48V - 120mA 110V - 35m A220V - 25mA
IP rATINg IP 65
WEIgHT 93g
PACkINg dIMENSIONS 110x100x100mm
118
SPECTRA BEACONS
sPeCtrA b100str Xenon beACon
VOLTAgE VOLTAgE
10 - 30 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Xenon Strobe (Flashing beacon)
LIgHT OuTPuT 1 Joule @ 0.75Hz
CurrENT CONSuMPTION 10-30V - 135mA 110V - 30mA 220V - 20mA
IP rATINg IP 65
WEIgHT 105g
PACkINg dIMENSIONS 110x100x100mm
119
SPECTRA BEACONS
sPeCtrA b100LDA LeD beACon
VOLTAgE VOLTAgE
10-30 VdC 90-230 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 90-230 Vac
LENS COLOur Red, Yellow, Amber, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE LED (Permanent status beacon)
LIgHT OuTPuT 9 High power LEDs
CurrENT CONSuMPTION 10-30V - 80mA 90-230V - 32mA
IP rATINg IP 65
WEIgHT 93g
PACkINg dIMENSIONS 110x100x100mm
120
SPECTRA BEACONS
sPeCtrA b200sLF stAtUs FILAment beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp BA 9 (Permanent Status Beacon)
LIgHT OuTPuT 5W
CurrENT CONSuMPTION 12V - 417mA 24V - 208mA 48V - 104mA 110V - 44mA 220V - 22mA
IP rATINg IP 65
WEIgHT 77g
PACkINg dIMENSIONS 110x70x70mm
121
SPECTRA BEACONS
sPeCtrA b200FLF FLAshIng FILAment beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp BA 9 (Flashing Lamp Beacon)
LIgHT OuTPuT 5W @ 1Hz
CurrENT CONSuMPTION 12V - 500mA 24V - 250mA 48V - 120mA 110V - 35mA 220V - 25mA
IP rATINg IP 65
WEIgHT 79g
PACkINg dIMENSIONS 110x70x70mm
122
SPECTRA BEACONS
sPeCtrA b200str Xenon beACons
VOLTAgE VOLTAgE
10-30 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10 - 30 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Xenon Strobe (Flashing Beacon)
LIgHT OuTPuT 1 Joule @ 0.75Hz
CurrENT CONSuMPTION 10-30V - 135mA 110V - 30mA 220V - 20mA
IP rATINg IP 65
WEIgHT 84g
PACkINg dIMENSIONS 110x100x100mm
123
SPECTRA BEACONS
sPeCtrA b200LDA LeD beACons
VOLTAgE VOLTAgE
10-30 VdC 90-230 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 90-230 Vac
LENS COLOur Red, Yellow, Amber, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE LED (Permanent Status Beacon)
LIgHT OuTPuT 9 High power LEDs
CurrENT CONSuMPTION 10-30V - 80mA 90-230V - 32mA
IP rATINg IP 65
WEIgHT 78g
PACkINg dIMENSIONS 110x70x70mm
124
SPECTRA BEACONS
sPeCtrA b300sLF stAtUs beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp E14 (Permanent Status Beacon)
LIgHT OuTPuT 25W
CurrENT CONSuMPTION 12V - 2.1A 24V - 1.1A 48V - 520mA 110V - 217mA 220V - 109mA
IP rATINg IP 65
WEIgHT 262g
PACkINg dIMENSIONS 180x120x120mm
125
SPECTRA BEACONS
sPeCtrA b300FLF bLInkIng beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp E14 (Blinking beacon) - 3 frequencies selectable during installation
LIgHT OuTPuT 25W @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION 12V - 1.75A 24V - 1.1A 48V - 0.8mA 110V - 255mA 220V - 130mA
IP rATINg IP 65
WEIgHT 283g
PACkINg dIMENSIONS 180x120x120mm
126
SPECTRA BEACONS
sPeCtrA b300str Xenon beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Xenon Strobe (Flashing Beacon)
LIgHT OuTPuT 5 Joule @ 1Hz
CurrENT CONSuMPTION 12V - 500mA 24V - 250mA 48V - 175mA 11V - 70mA 220V -
35mA
IP rATINg IP 65
WEIgHT 325g
PACkINg dIMENSIONS 180x120x120mm
127
SPECTRA BEACONS
sPeCtrA b300sLh stAtUs hALogen beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Halogen Lamp (Permanent Status Beacon)
LIgHT OuTPuT 20W - dc units / 25W - ac units
CurrENT CONSuMPTION 12V - 1.7A 24V - 833mA 110V - 217mA 220V - 109mA
IP rATINg IP 65
WEIgHT 262g
PACkINg dIMENSIONS 180x120x120 mm
128
SPECTRA BEACONS
sPeCtrA b300FLh bLInkIng hALogen beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Halogen Lamp (Blinking Beacon) - 3 frequencies selectable during installation
LIgHT OuTPuT 20W - dc units / 25W - ac units @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION 12V - 1.7A 24V - 1A 110V - 208mA 220V - 116mA
IP rATINg IP 65
WEIgHT 279g
PACkINg dIMENSIONS 180x120x120mm
129
SPECTRA BEACONS
sPeCtrA b300sts synChronIseD beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Xenon Strobe (Synchronised Flashing Beacon)
LIgHT OuTPuT 5 Joule @ 1Hz
CurrENT CONSuMPTION 12V - 500mA 24V - 250mA 48V - 175mA 110V - 70mA 220V - 35mA
IP rATINg IP 65
WEIgHT 325g
PACkINg dIMENSIONS 180x120x120mm
130
SPECTRA BEACONS
sPeCtrA b300stF DUAL FreQUenCy Xenon
beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
48 VdC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 VO f1)
LIgHT SOurCE Xenon Strobe Dual-frequency Flashing Beacon
LIgHT OuTPuT 5 Joule @ 1Hz / 2Hz
CurrENT CONSuMPTION 12V - 500mA 24V - 250mA 48V - 175mA
IP rATINg IP 65
WEIgHT 325g
PACkINg dIMENSIONS 180x120x120mm
131
SPECTRA BEACONS
sPeCtrA b300rth rotAtIng hALogen beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Halogen Bulb (Rotating Beacon) @ 180 RPM
LIgHT OuTPuT 20W - dc units / 25W - ac units
CurrENT CONSuMPTION 12V - 1.72A 24V - 0.91A 110V - 216mA 220V - 117mA
IP rATINg IP 65
WEIgHT 370g
PACkINg dIMENSIONS 180x120x120mm
132
SPECTRA BEACONS
sPeCtrA b300LDA LeD mULtI-FUnCtIon ArrAy
beACon
VOLTAgE VOLTAgE
24 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 VO f1)
LIgHT SOurCE LED (4 rotating, 4 flashing and 1 steady on configuration mode)
LIgHT OuTPuT 16 High output LED array
CurrENT CONSuMPTION 24V - 130mA 110V - 90mA 220V - 50mA
IP rATINg IP 65
WEIgHT 285g
PACkINg dIMENSIONS 180x120x120 mm
133
SPECTRA BEACONS
sPeCtrA b400sLF stAtUs beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp E14 (Permanent Status Beacon)
LIgHT OuTPuT 40W
CurrENT CONSuMPTION 12V - 3.3A 24V - 1.7A 110V - 350mA 220V - 175mA
IP rATINg IP 65
WEIgHT 510g
PACkINg dIMENSIONS 250x150x150mm
134
SPECTRA BEACONS
sPeCtrA b400FLF bLInkIng beACon
VOLTAgE VOLTAgE
24 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 VO f1)
LIgHT SOurCE Filament Lamp E14 (Blinking Beacon) - 3 frequencies selectable during installation
LIgHT OuTPuT 40W @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION 24V - 1.14A 110V - 340mA 220V - 118mA
IP rATINg IP 65
WEIgHT 535g
PACkINg dIMENSIONS 250x150x150mm
135
SPECTRA BEACONS
sPeCtrA b400str Xenon beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
24 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Xenon Strobe (flashing beacon) - 3 flash patterns selectable during installation
LIgHT OuTPuT 15 Joule @ 1Hz / 15 Joule + 10 Joule @ 0.75Hz / 15 Joule + 10 Joule + 10 Joule @ 0.5Hz
CurrENT CONSuMPTION 24V - 1.14A 110V - 340mA 220V - 118mA
IP rATINg IP 65
WEIgHT 696g
PACkINg dIMENSIONS 250x200x150mm
136
SPECTRA BEACONS
sPeCtrA b400sLh stAtUs hALogen beACon
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Halogen Lamp (Permanent Status Beacon)
LIgHT OuTPuT 35W - dc units / 40W - ac units
CurrENT CONSuMPTION 12V - 2.9A 24V - 1.5A 110V - 350mA 220V - 175mA
IP rATINg IP 65
WEIgHT 510g
PACkINg dIMENSIONS 250x150x150mm
137
SPECTRA BEACONS
sPeCtrA b400FLh bLInkIng hALogen beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Halogen Lamp (Blinking Beacon) - 3 selectable frequencies during installation
LIgHT OuTPuT 35W - dc units @ 0.5Hz / 1Hz / 2Hz 40W - ac units @ 0.5Hz / 1Hz / 2Hz
CurrENT CONSuMPTION 12V - 3.1A 24V - 2.05A 110V - 321mA 220V - 178mA
IP rATINg IP 65
WEIgHT 535g
PACkINg dIMENSIONS 250x150x150mm
138
SPECTRA BEACONS
sPeCtrA b400sts synChronIseD Xenon beACon
VOLTAgE VOLTAgE
24 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Xenon Strobe (Synchronised Flashing Beacon)
LIgHT OuTPuT 15 Joule @ 1Hz
CurrENT CONSuMPTION 24V - 870mA 48V - 480mA 110V - 400mA 220V - 225mA
IP rATINg IP 65
WEIgHT 696g
PACkINg dIMENSIONS 250x150x150mm
139
SPECTRA BEACONS
sPeCtrA b400rth rotAtIng hALogen beACon
a multi-function Led array beacon. the surface mount base can also be
mounted with a right angle bracket or with a tube mounted assembly.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12Vdc 24 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Halogen Bulb (Rotating Beacon) @ 180 RPM
LIgHT OuTPuT 35W - dc units / 40W - ac units
CurrENT CONSuMPTION 12V - 3A 24V - 1.54A 110V - 338mA 220V - 186mA
IP rATINg IP 65
WEIgHT 578g
PACkINg dIMENSIONS 250x150x150mm
140
SPECTRA BEACONS
sPeCtrA b400LDA LeD mULtI-FUnCtIon ArrAy
beACon
VOLTAgE VOLTAgE
10 - 50 VdC 110 VAC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-50 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Amber, Clear, Blue & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE LED (4 rotating, 4 flashing and steady on configurations)
LIgHT OuTPuT 32 High output L.E.D array
CurrENT CONSuMPTION 24V - 870mA 48V - 480mA 110V - 400mA 220V - 225mA
IP rATINg IP 65
WEIgHT 845g
PACkINg dIMENSIONS 250x150x150mm
141
PANEL MOUNT INDICATORS
e2s 22D PAneL moUnt InDICAtors
the e2s-22d range includes buzzers, combination units and pilot lights
featuring super bright multichip Leds. ingress protection to iP 65,
PANEL MOuNT INdICATOrS - E2S 22d PANEL MOuNT INdICATOrS
VOLTAgE VOLTAgE
24 VAC/dC 110 VAC/dC
220 VAC/dC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vac/dc 48 Vac/dc 110 Vac/dc 220 Vac/dc
duTy CyCLE 50 000hrs
SOuNd OuTPuT 91 dB(A) at 1m
FLASH rATE 2Hz
APP. rANgE 20m
CurrENT CONSuMPTION 24V - 20-80mA 48V - 20-80mA 110V - 18-25mA 220V - 18-25mA
LIgHT COLOurS Red, Amber, Green, Blue & White
IP rATINg IP 65
WEIgHT 90g
PACkINg dIMENSIONS 60x35x35mm
142
PANEL MOUNT INDICATORS
e2s 28D PAneL moUnt bUzzers
the e2s-28d range consists of the highest quality Floyd bell continuous
tone and dual tone panel mounted piezo buzzers. the built-in volume
VOLTAgE VOLTAgE
30 VdC 110 VAC/dC
220 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 30 Vdc 48 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 95 dB(A) at 1m
FLASH rATE 2 900Hz
APP. rANgE 20m
CurrENT CONSuMPTION 30V - 20mA 48V - 20mA 110V - 40mA 220V - 40mA
IP rATINg IP 65
WEIgHT 90g
PACkINg dIMENSIONS 60x45x45mm
143
panel mount indicators
Sirenco Panel Mount 22mm indicators
The range includes buzzers, combination units and pilot lights featuring
super bright multichip LEDs. Ingress protection to IP 65, low current
panel mount indicators - Sirenco Panel Mount 22mm Indicators
All dimensions in mm
Specifications
Voltage 12 Vac/dc 24 Vac/dc 110 Vac 220 Vac 380 Vac
Duty Cycle 50 000hrs
Current Consumption 12V - 20-80mA 24V - 20-80mA 110V - 18-25mA 220V - 18-25mA 380V - 18-
25mA
Light Colours Red, Amber, Green, Blue & White
IP Rating IP 65
Weight 90g
Packing Dimensions 60x60x155mm
144
PANEL MOUNT INDICATORS
sIrenCo PAneL moUnt 22mm bUzzer
the range includes buzzers, combination units and pilot lights featuring
super bright multichip Leds. ingress protection to iP 65, low current
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vac/dc 24 Vac/dc 110 Vac 220 Vac 380 Vac
duTy CyCLE 50 000hrs
SOuNd OuTPuT 91 dB(A) at 1m
FrEquENCy 2 900Hz
APP. rANgE 20m
CurrENT CONSuMPTION 12V - 20-80mA 24V - 20-80mA 110V - 18-25mA 220V - 18-25mA 380V - 18-25mA
IP rATINg IP 65
WEIgHT 90g
PACkINg dIMENSIONS 60x60x155mm
145
panel mount indicators
Sirenco Panel Mount 22mm Combination Unit
The range includes buzzers, combination units and pilot lights featuring
super bright multichip LEDs. Ingress protection to IP 65, low current
panel mount indicators - Sirenco Panel Mount 22mm Combination Unit
All dimensions in mm
Specifications
Voltage 12 Vac/dc 24 Vac/dc 110 Vac 220 Vac 380 Vac
Duty Cycle 50 000 Hrs
Sound Output 91 dB(A) at 1m
App. Range 20m in still air on open field
Current Consumption 12V - 20-80mA 24V - 20-80mA 110V - 18-25mA 220V - 18-25mA 380V - 18-25mA
Light Colours Red, Amber, Blue, Green & White
IP Rating IP 65
Weight 90g
Packing Dimensions 65x68x155mm
146
SPECTRA TRAFFIC LIGHTS
sPeCtrA b350tLA LeD ArrAy trAFFIC LIght
the b350 series of traffic light beacons is avaliable in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
VOLTAgE VOLTAgE
10-30 VdC 90-230 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 90-230 Vac
LENS COLOur Red, Amber & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE High output LED
LIgHT OuTPuT 15 x High-bright LED array
CurrENT CONSuMPTION 10-30V - 140mA 90-230V - 10-40mA
IP rATINg IP 65
WEIgHT 230g
PACkINg dIMENSIONS 120x120x150mm
147
SPECTRA TRAFFIC LIGHTS
sPeCtrA b350tsb FILAment LAmP trAFFIC LIght
the b350 series of traffic light beacons is available in single e14 filament
bulb or high output Led array version. the compact housing is ideal for
SPECTrA TrAFFIC LIgHTS - SPECTrA B350TSB FILAMENT LAMP TrAFFIC LIgHT
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 230 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac
LENS COLOur Red, Yellow, Blue, Clear, Amber & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp E14
LIgHT OuTPuT 15W
CurrENT CONSuMPTION 12V - 1.25A 24V - 625mA 48V - 313mA 110V - 130mA 220V - 65mA
IP rATINg IP 65
WEIgHT 210g
PACkINg dIMENSIONS 120x120x150mm
148
SPECTRA TRAFFIC LIGHTS
sPeCtrA b450tLA LeD ArrAy
the b450 series of traffic light beacons is avaliable in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
VOLTAgE VOLTAgE
10-30 VdC 90-230 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 90-230 Vac
LENS COLOur Red, Amber & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE High output LED traffic light
LIgHT OuTPuT 24 x LED array
CurrENT CONSuMPTION 10-30V - 175mA 90-230V - 15-40mA
IP rATINg IP 65
WEIgHT 410g
PACkINg dIMENSIONS 150x180x150mm
149
SPECTRA TRAFFIC LIGHTS
sPeCtrA b450tsb FILAment LAmP
the b450 series of traffic light beacons is available in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
SPECTrA TrAFFIC LIgHTS - SPECTrA B450TSB FILAMENT LAMP
VOLTAgE VOLTAgE
24 VdC 110 VAC
230 VAC -
All dimensions in mm
SPECIFICATIONS
VOLTAgE 24 Vdc 110 Vac 230 Vac
LENS COLOur Red, Amber, Blue, Yellow, Clear & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Filament Lamp E27 traffic light
LIgHT OuTPuT 25W
CurrENT CONSuMPTION 24V - 1.04A 110V - 217mA 220V - 108mA
IP rATINg IP 65
WEIgHT 380g
PACkINg dIMENSIONS 150x180x150mm
150
SPECTRA TRAFFIC LIGHTS
sPeCtrA b450tDb DUAL FILAment LAmP
the b450 series of traffic light beacons is available in single e27 filament
lamp, dual e14 filament lamp or high output Led array version. the
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 230 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 48 Vdc 115 Vac 220 Vac
LENS COLOur Red, Amber, Blue, Yellow, Clear & Green
HOuSINg & LENS Polycarbonate (UL 94 V0 f1)
LIgHT SOurCE Dual Fialment Lamp E14 Traffic Light
LIgHT OuTPuT 2x15W
CurrENT CONSuMPTION 12V - 1.25A 24V - 625mA 48V - 312mA 110V - 130mA 220V -
65mA
IP rATINg IP 65
WEIgHT 395g
PACkINg dIMENSIONS 150x180x150mm
151
Spectra sounders & combination units
Spectra B300SND & B400SND sounder
Voltage Voltage
10-30 Vac/dc 40-260 Vac/dc
All dimensions in mm
Specifications
Voltage 10-30 Vac/dc 40-260 Vac/dc
Duty Cycle Continuous
Sound Output 110 dB(A) at 1m
Sound Frequency 1 200 / 500Hz (depends on tone selection)
Sound Select 3 user selectable tones with a 2 stage alarm option
App. Range 800m in still ari on open field
Current Consumption 10-30V - 100mA 40-260V - 36mA
IP Rating IP 65
Weight 500g
Packing Dimensions 150x150x120mm
152
SPECTRA SOUNDERS & COMBINATION UNITS
sPeCtrA h100b horn & h100bL LeD Combo
this compact horn reproduces the alert sound of the larger traditional
electromechanical equivalent but without any of the reliability issues.
SPECTrA SOuNdErS & COMBINATION uNITS - SPECTrA H100B HOrN & H100BL LEd COMBO
the unit has a high output and the signal is suitable for a variety of
installation types.
VOLTAgE VOLTAgE
10-30 VAC/dC 40-260 VAC/dC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 10-30 Vdc 40-260 Vac/dc
duTy CyCLE Continuous
SOuNd OuTPuT 100 dB(A) at 1m
SOuNd FrEquENCy 1200 / 500Hz (depends on tone selection)
SOuNd SELECT 3 user selectable tones
APP. rANgE 300m in still air on open field
CurrENT CONSuMPTION 10-30V - 24mA 40-260V - 20mA
CurrENT CONS. (COMBO) 12V - 84mA 24V - 104mA 110V - 138mA 220V - 42mA
LENS COLOur Red, Amber, Green, Yellow or Blue
IP rATINg IP 65 - Sounders IP 65 - Combo
WEIgHT 118g - Sounder 184g - Combo
PACkINg dIMENSIONS 80x100x80mm - Sounder 150x100x100mm - Combo
153
Spectra sounders & combination units
Spectra H100T Trumpet Horn & H100TX xenon Combo
This trumpet horn reproduces the alert sound of the larger traditional
electromechanical equivalent but without any of the reliability issues.
Spectra sounders & combination units - Spectra H100T Trumpet Horn & H100TX xenon Combo
The unit has a high output and the signal is suitable for a variety of
installation types.
Voltage Voltage
12 Vdc 24 Vdc
110 Vac 220 Vac
All dimensions in mm
Specifications
Voltage 24 Vdc 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 100 dB(A) at 1m
Sound Frequency 1 200 / 500Hz (Depends on tone selection)
Sound Select 3 user selectable tones
App. Range 300m in still ari on open field
Current Consumption 10-30V - 92mA 40-260V - 20mA
Current Cons. (Combo) 24V - 145mA 110V - 49mA 220V - 30mA
Lens Colour Red, Amber, Green, Yellow or Blue
IP Rating IP 65 - Sounders IP 65 - Combo
Weight 148g - Sounders 219g - Combo
Packing Dimensions 180x100x100mm - Sounders 250x100x100mm - Combo
154
SPECTRA SOUNDERS & COMBINATION UNITS
sPeCtrA h110t trUmPet horn & h110tX
Xenon Combo
this trumpet horn reproduces the alert sound of the larger traditional
electromechanical equivalent but without any of the reliability issues.
SPECTrA SOuNdErS & COMBINATION uNITS - SPECTrA H110T TruMPET HOrN & H110TX XENON COMBO
the unit has a high output and the signal is suitable for indoor and
outdoor installations.
VOLTAgE VOLTAgE
12 VdC 24 VdC
110 VAC 220 VAC
All dimensions in mm
SPECIFICATIONS
VOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac
duTy CyCLE Continuous
SOuNd OuTPuT 110 dB(A) at 1m
SOuNd FrEquENCy 1200 / 500Hz (Depends on tone selection)
SOuNd SELECT 3 user selectable tones
APP. rANgE 500m depending on tone selection
CurrENT CONSuMPTION 10-30V - 105mA 40-260V - 36mA
CurrENT CONS. (COMBO) 12V - 2.24A 24V - 1A 110V - 49mA 220V - 135mA
LENS COLOur Red, Amber, Green, Yellow or Blue
IP rATINg IP 65 - Sounders IP 65 - Combo
WEIgHT 341g - Sounders 678g - Combo
PACkINg dIMENSIONS 350x150x150mm - Sounder 480x150x150mm - Combo
155
Spectra sounders & combination units
Spectra Signal Tower Stack Lights 70mm
Voltage Voltage
24 Vac/dc 110 Vac
220 Vac -
All dimensions in mm
Specifications
Voltage 24 Vac/dc 110 Vac 220 Vac
Duty Cycle Continuous
Sound Output 2 tone - 84 dB(A) at 1m 16 tone - 90 dB(A) at 1m
Sound Frequency 2 600Hz (Depends on tone selection and sound module)
Sound Select 2 tones or 16 tones
App. Range 200m depending on tone selection
Current Consumption 24V - 50-210mA 110V - 25-43mA 220V - 15-85mA
Current Cons. (Combo) 24V - 84.5A 110V - 78mA 220V - 78mA
Lens Colour Red, Amber, Green, Yellow, Clear or Blue
IP Rating IP 64
Weight Depends on total modules
Packing Dimensions Depends on total modules
156
TURBO BLOWER
sIrenCo PetroL engIne PowereD tUrbo bLower
High volume turbo blower used for warehouses, malls and large
structures when situations call for a higher airflow. Precision-balanced
SPECIFICATIONS
ENgINE Honda 5.5 Hp / 4.1 kW GX series with oil Alert Protection
FAN 16 21 24
ruN TIME 58min
PPV AIrFLOW 17 099 m/hr 29 355 m/hr 30 039 m/hr
WEIgHT 29kg 40kg 52kg
MOdELS Engine blower 16 Engine blower 21 Engine blower 24
MOTOr 5.5Hp/4 1 kW Petrol 5.5Hp/4 4.1 kW Petrol Engine 5.5Hp/4 4.1 Petrol
Honda Engine Honda Engine Honda Engine
rPM 2900r/min 1450r/min 1450r/min
FAN SIzE 400 mm 540 mm 600 mm
7 blade 7 blade 9 blade
PACkINg dIMENSIONS A : 543 (h) A : 651 (h) A : 747 (h)
(refer to diagram) B : 518 (w) B : 626 (w) B : 721 (w)
C : 442 (d) C : 506 (d) C : 541 (d)
157
turbo blower
Sirenco Electric Powered Turbo Blower
with ducting. Housed in heat resistant lexan. Stackable for more air force
and easy storage. Optional duct adapter for use with duct in confined
space applications. Optional door bar and hanger kit for suspending
doorways or windows.
Voltage Voltage
230 Vac 380 Vac
Specifications
Engine Motor 1.2kW 50/60Hz - 16- 20 - 24
Fan 16 20 24
Run time 58min
PPV Airflow 10 360 m/hr 16 150 m/hr 18 360 m/hr
Weight 26kg 38kg 45kg
Models Electric Blower 16 Electric Blower 20 Electric Blower 24
Motor 1.2kW, 220, 380V 1.2kW, 220, 380V 1.5kW, 220, 380V
RPM 2 900r/min 1 450r/min 1 450r/min
FAn size 400 mm 500 mm 600 mm
7 blade 9 blade 9 blade
Packing Dimensions A: 480 (h)) A: 650 (h) A: 730 (h)
(refer to diagram) B: 460 (w) B: 630 (w) B: 710 (w)
C: 320 (d) C: 430 (d) C: 490 (d)
158
notes
159
Intrinsically Safe Sounders and Beacons Signal Towers Airhorns
www.kama.co.za
Flameproof Devices Marine Devices Beacons Trafc Lights