Vous êtes sur la page 1sur 4

c 


     c 

  c 


To obtain a good boat, you must first start with a good design. The collection of designs
available is immense. But with good research we have brought few off the best Boat Designs
And Plans.

! ! 
 

 

In years gone by, choosing a boat design to build was limited to what you could get your
hands on through local boat yards or designers. With the Internet, the whole world plus a
huge archive of older designs is now at your finger tips.


   ! !    

No longer do you have to spend thousands of dollars to see small plans so you could decide if
it was what you truly wanted to build. These days, a few hours on the Net, and you have
probably more information than you need. As a matter of fact, you could end up with
information overload.

My best advice is first, decide on the basic concept. Do you want a small day sailer, ocean
going mono hull, live aboard catamaran or car topper. Is your family truly interested in going
boating with you, or are you just assuming? Ask yourself a lot of questions first.

Remember, all you need is some basic woodworking tools, some experience and some
patience. The building of your own boat is a challenge, but if you meet it, the reward is the
deep satisfaction of a self-made life afloat.

 
  
  
Thank you for visiting Boat Designs And Plans, a site dedicated not only to give you a full
review of Boat Designs And Plans but we also give you an actual users inside look at the
building a boat philosophy and mindset. Here you can get all off the pros and cons by actual
users of this boad building system. Can the Boat Designs And Plans really work ?Click here
to read some of users feedback!
I first ran into Boat Designs And Plans about some time ago after losing my first build where
I had to restart the whole thing all over again as I said earlier that was time consuming and
money spent to the drains. I did not want to give up on my affords and started researching on
other methods and finally out of the blues there it was proper Designs and Plans.
Here is the intresting part: plans for boats

I checked out in a couple of forums and the Boat Designs And Plans is well recived as it is
the first step of boat building. Looking back on it now Boat Designs And Plans should have
been obvious,becausethats what all of the boat builders small scale or big should have done
first.


c 
` c- the front and generally sharp end of the hull. It is designed to reduce the
resistance of the hull cutting through water and should be tall enough to prevent water
from easily washing over the top of the hull
` c  - the internal walls of the hull

` 
- are long, longitudinal strips on hydroplaning hulls that deflect downwards the
spray that is produced by the hull when it travels at speed in the water. The term also
refers to distinct changes in angle of the hull sections, where the bottom blends into
the sides of a flat bottomed skiff, for instance. A hull may have 2 or more chines to
allow an approximation of a round bottomed shape with flat panels. It also refers to
the longitudinal members inside the hull which support the edges of these panels.

` |! ± the top surface of the hull keeps water and weather out of the hull and allows
the crew to stand safely and operate the boat more easily. It stiffens an enclosed hull.

` Ñ   ± the strake immediately adjacent to the keel.

` Ñ
  ± The upper longitudinal structural member of the hull.

` è - the main central member along the length of the bottom of the boat. It is an
important part of the boat¶s structure which also has a strong influence on its turning
performance and, in sailing boats, resists the sideways pressure of the wind

` è 
± an internal beam fixed to the top of the keel to strengthen the joint of the
upper members of the boat to the keel

` ½- a steering device at the rear of the hull created by a turnable blade on a
vertical axis

`  ± the generally curved shape of the top of the hull. The sheer is traditionally
lowest amidships to maximize freeboard at the ends of the hull. Sheers can be reverse,
higher in the middle, to maximize space inside or straight or a combination of shapes.

`   ± a continuation of the keel upwards at the front of the hull

`  
± the back of the boat

`    ± a strip of material running longitudinally along the vessel¶s side, bilge or


bottom
` 
  ± a wide, flat, which on small power boats, is often designed to carry an
outboard motor. Transoms increase width and also buoyancy at the stern.

    


 
|
 

c  
   
[ Jul

If you have wondered ,that you have this wonderfull hobby and its taking so much of your
time and money but its not completed due to unforsaken fault and wrong judgement of your
action then please read on.

Every boat builder¶s absolute dream is to see their dream boat coming to shape ,giving your
boat a name,breaking champagne bottle and watching your boat touch the open waters.As the
proud owner of not one but two boats to my name and a heartbroken owner who had lots of
traial and error which cost me time and money,i know exactly how it feels tobecompletly
helpless and feels like nothing you can do and to count your loses«but there is light and the
end of the tunnel«and that light is Boat Designs And Plans.This is the story about me ,The
Boat Designs And Plans and my boat which i named Lucile.

     


 

c

c  
  
   

My real dream and pasion is to build my own boat. Even though I had such a hobby in my
mind my job I always had passion for boats ,it has been a long time ambition you can say, did
not permit me to do so because of the amount of hours you¶ve got to spend on it is long. Not
forgetting the cost of building a boat these days does not come cheap.

I have a very close friend, he is my childhood friend, we grew up together and share similar
intrest like fishing and boating. His name is MichellSantahu, we just call him Mic. This guy
runs his own pest control business and he is quite well to do. So one fine day he calls me up
and says come lets go fishing this coming weekend and he has a surprise to show. So the day
came all packed up for our trip as we walked down the deck there it was µAgroSerene¶.He
has purchased a brand new boat. I was shocked to see the boat and indeed happy for him as
well.

After that trip I really made up my mind on owning my own boat the fealing is totally
different. I had a discussion with my wife and she agreed to my idea of building a boat. So
that¶s it I have an idea of building a boat, so what do I need to build a boat. Space ,tools
,money and a little time to make it happen.

I gathered up all the resource for boat building from the net got some books and asked a lot
from my friend who had build their boats as well. I started thinking that I was ready and got
into trouble again and again and again. Wrong tools, wrong materials and the best part no
boat designs and no plans.

     


 
c 


c  
  !  
c " 
After a lot of research on Boat Designs And Plans ,i then had the puzzle fitted up within no
time and there she was µLucile¶ my first beautiful boat. What we eventually need is a good
Boat designs and plans to build a good trouble free boat. When you have the proper designs
and the proper plans laid out then its like a jig saw puzzle where you just put into place and
finishing it.

! ! 
  
c |


: Plans For Boats

Vous aimerez peut-être aussi