Académique Documents
Professionnel Documents
Culture Documents
Note: For detailed contents of the 2nd level cache: On-board 512 KB Pipelined
PCM-5862/5862L, please refer to the Burst SRAM
enclosed CD-ROM or Disk (in
PDF format). RAM: Two 72-pin SIMM sockets accept 8 ~
128 MB EDO/FPM DRAM
For more information on this and other Advantech I/O bus expansion: One 32-bit PCI bus
products please visit our website at: expansion slot
http://www.advantech.com
http://www.advantech.com/epc PCI SVGA/flat panel interface
For technical support and service for please visit our Chipset: C&T 65550
support website at:
Display memory: 1 MB on-board memory,
http://support.advantech.com supports up to 2 MB
This manual is for the PCM-5862/5862L. Display type: Simultaneously supports CRT
and flat panel (EL, LCD, and gas plasma)
Part No. 2006586230 1st edition displays
Printed in Taiwan July 1999
CRT resolution: Supports non-interlaced CRT and J16 Audio power source setting
LCD monitors up to 1024 x 768 @ 256 colors with 1
MB on-board display memory Connectors
Label Function
Audio function (PCM-5862 only) CN1 CRT display connector
CN2 Flat panel display connector
Chipset: ESS 1868 or 1869
CN3 PC/104 ISA-bus expansion
Audio controller: 16-bit codec, Sound Blaster Pro CN4 USB channel 1 connector
compatible CN5 USB channel 2 connector
Stereo sound: Full-duplex, integrated 3D audio CN6 Fan power connector
CN7 Front panel connector
Audio interface: Microphone in, Line in, CD audio
in, Line out, Speaker out CN8 CD audio input connector
CN9 PC/104 ISA-bus expansion
Power: Accepts +12 V source for improved audio
CN10 Peripheral power connector
quality
CN11 Ethernet 10Base-T connector
CN12 IR connector
Ethernet interface
CN13 Audio connector
Chipset: REALTEK RTL8029 Ethernet controller CN14 Main power connector
CN15 Keyboard and PS/2 mouse
Ethernet interface: Novell NE2000 compatible
connector
10Base-T interface. Includes drivers & boot ROM
CN16 COM-port connector
CN17 IDE hard drive connector
Mechanical and environmental CN18 Floppy drive connector
Max. power requirements: 7 A @ 5 V (4.75 V ~ CN19 Parallel port connector
5.25 V)
Operating temperature: 0 ~ 60 C (32 ~ 140 F) Jumper settings
J1
2 4 6 2 4 6 2 4 6 2 4 6 2 4 6
Jumpers 2 4 2 4 2 4 2 4
Label Function
J1 System/PCI clock setting J4: CPU frequency ratio
J2 System/PCI clock setting 1.5 *2 2.5 3
J3 CPU voltage setting 1 3 5 1 3 5 1 3 5 1 3 5
2 4 6 2 4 6 2 4 6
3 2 1 3 2 1 3 2 1
J7: Buzzer enabled/disabled
*enabled disabled J16: Audio power source setting
*+5 V +12 V
1 2 3 1 2 3
2 4 6 2 4 6
2 4 6 2 4 6 2 4 6
2 4 6 2 4 6 2 4 6
1 1
2 2
3 3
Locating jumpers
Mechanical drawings
J13 J14
J15
J16
J12
J11
J10
J7 J9
J8
J4
J3
J2
J1
J5 J6
Locating connectors
CN14
CN13
CN12
CN9
CN11 CN3
CN10
CN7
CN8
CN5
CN4
CN2
CN1
CN6