Académique Documents
Professionnel Documents
Culture Documents
Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
Symbols
and ground to guarantee minimal wear and to extend service life. See page 358
Pilot piston is hardened and ground, sealed to prevent leakage.
Single-piece, high durometer, extrusion resistant seals.
Optional bias springs for back-pressure application flexibility. Ordering Code
Metric cavity. 1 2
S P C 4 . M 3 3 . 0 * . 0 0 0
3
Valve basic 000 = Standard configuration
Technical Data
Performance Details Maximum operating pressure: 420 bar
code Cavity
M33 = METRIC M33 x 2
Maximum flow: 100 l/min Bias Spring (see table below for available options)
with 28 and 27 nose
Internal leakage: 0.10 cc/min max @ Options
sizes
5 = Without O-Ring
420 bar Marking
on the pilot piston
Pilot ratio 2.8:1 0 = Standard factory marking
Temperature: -30C to 110C Customized markings can be done upon request
Fluids: Mineral-based or synthetics
with lubricating properties at
Bias Spring Options
Pressure [bar]