Engineering Faculty of Engineering & Applied Sciences Riphah International University, Islamabad, Pakistan
EE-241 Network Analysis Semester: III
List of Experiments Experiment No: 01 To measure some basic quantities in electrical/electronic engineering by using lab instruments.(DC Measurement), Introduction of multisim software. Experiment No: 02 Familiarization of oscilloscope, function generator and the frequency counter in measuring AC parameters of the signal. (Hardware & multisim simulation) Experiment No: 03 To Measure Average and R.M.S values of alternating quantity. (Hardware & multisim simulation) Experiment No: 04 To use node and mesh current analysis methods in order to analyze a resistive network. Experimental Verify Thevenin and Norton theorems, and the superposition theorem. (Hardware & multisim simulation) Experiment No: 05 To experimentally verify the frequency domain calculations using the phasor method. To measure the phase difference between two sinusoidal signals experimentally. (Hardware & multisim simulation) Experiment No: 06 Experimental Verification of Maximum Power Transfer Theorem. (Hardware & multisim simulation) Experiment No: 07 To compute the power factor of a passive circuit and verify the conservation of energy in sinusoidal steady state. (Hardware & multisim simulation) Experiment No: 08 To Study the step Response of Second Order RLC Circuit. Hardware & multisim simulation) Experiment No: 09 To Study the step Response of First Order RL/RC Circuit. (Hardware & multisim simulation) Experiment No: 10 To study the series and parallel LC circuits and finding the Resonance frequency. (Hardware & multisim simulation) Experiment No: 11 To find out the transfer functions of different RC networks. (Hardware & multisim simulation) Experiment No: 12 To find out the frequency response of various RC network. (Hardware & multisim simulation) Experiment No: 13 To measure input impedance and output impedance of a given two port network. (Hardware & multisim simulation) Experiment No: 14 To design a filter to pass a signal at a desired frequency and reject the Signal at another frequency.