Académique Documents
Professionnel Documents
Culture Documents
MATERIALS HANDLING
I. INTRODUCTION
Material handling is a field involving the transport, storage, and control of goods and
products throughout the processes of manufacturing, distribution, consumption and disposal of
all related materials. The focus of the material handling industry is on the methods, mechanical
equipment, systems and related controls used to achieve necessary functions.
3. Production Flow
If the flow is fairly constant between two fixed positions that are not likely to be changed, fixed
equipment such as conveyors or chutes can be successfully used. If, on the other hand, the flow
is not constant and the direction changes occasionally from one point to another because
several products are being produced simultaneously, moving equipment such as trucks would
be preferable.
4. Cost Considerations
This is the most important consideration. The above factors can help narrow the range of
suitable equipment, while costing can help in taking the final decision. Several cost elements
need to be taken into consideration when comparisons are made between various items of
equipment that are all capable of handling the same load. Initial investment and operating and
maintenance cost are the major costs to be considered. By calculating and comparing the total
cost of each items of equipment under consideration, a more rational decision can be reached
on the most appropriate choice.
5. Nature of Operations
Selection of equipment also depends on the nature of operations like whether handling is
temporary or permanent, whether the flow is continuous or intermittent and material, flow
pattern-horizontal or vertical.
6. Engineering Factors
Engineering factors such as door, ceiling dimensions, floor space, floor conditions and structural
strengths are also taken in consideration in the selection of equipment.
7. Equipment reliability
Reliability of the equipment and supplier reputation and the after sale services plays an
important role in selecting the equipment.
Goals of Material Handling
1. Maintain product quality, reduce damage and provide protection of materials.
2. Promote safety and improve working conditions.
Improve productivity through:
Maintain, and replace as needed, all equipment and develop a preventive maintenance
program
4. Integrate all material handling equipment into a system
5. Reduce tare weight (describe the weight of packaging material).
6. Control inventory.
How Does Materials Handling Works
Material handling is a necessary and significant component of any warehousing and
logistics activity. Material handling means providing the right amount of the right material, in the
right condition, at the right place, at the right time, in the right position and for the right cost, by
using the right method. It applies to the movement of raw materials, work in process, finished
goods, packing materials, and disposal of scraps. In general, hundreds and thousands of tons of
materials are handled daily requiring the use of a large amount of manpower and equipment
while the movement of materials takes place from one processing area to another or from one
department to another department of the plant.
As a process, material handling incorporates a wide range of manual, semi-automated
and automated equipment and systems that support logistics and make the supply chain work.
Their application helps with:
Forecasting
Resource allocation
Production planning
Flow and process management
Inventory management and control
Customer delivery
After-sales support and service
Before planning, one should be very clear about perspective, material handling equation which
emphasizes the necessity of careful analyzing both the material to be handled and the move to
be made before selecting method. Such an equation is also helpful in the planning stage of
selection of materials handling equipment for the proposed project. (Comprehensive production
and operation management (1st ed., p. 304), Arora, K. (2004))
4. Type
Viewing the complex nature of materials handling, one can conclude that it needs
through planning for smooth and economic running of any productive and distributive system. It
further needs a large amount of data necessary for planning, no matter one is using it within an
industry or on a national transportation basis.
Automated System
Automated materials handling (AMH) refers to any automation that reduces or eliminates
the need for humans to check-in, check-out, sort material, or to move totes and bins
containing library material.
Highest fixed cost, lowest variable and labor cost with low flexibility
Examples
o check-in machines
o sorters
o conveyors
o singulators
o totes
o bins
o trolleys
o tote carriers.
Semi-automated System
Examples:
o Sortation systems
o Robotics
o Live racks
Information-directed System
Moderate fixed and variable cost with high flexibility and utilization
Examples
o RF wireless (Wi-Fi)
Characteristics of Materials
size
weight
shape
other (slippery, fragile, sticky, explosive, frozen)
IV. FOUR MAIN CATEGORIES MATERIAL HANDLING EQUIPMENT
Storage equipment is usually limited to non-automated examples, which are grouped in with
engineered systems. Storage equipment is used to hold or buffer materials during downtimes,
or times when they are not being transported. These periods could refer to temporary pauses
during long-term transportation or long-term storage designed to allow the buildup of stock. The
majority of storage equipment refers to pallets, shelves or racks onto which materials may be
stacked in an orderly manner to await transportation or consumption. Many companies have
investigated increased efficiency possibilities in storage equipment by designing proprietary
packaging that allows materials or products of a certain type to conserve space while in
inventory.
Examples of storage and handling equipment include:
Source: http://www.ontarioindustrial.com/
Stacking frames
Source: https://www.worksafe.qld.gov.au
Shelves, bins and drawers
Source:
http://www.nationwideindustrialsupply.com
Mezzanines
Source: http://www.aw-systems.com
2. Engineered Systems
There are several types of automated storage and retrieval systems. Their common feature is
the ability to quickly and directly access each designated storage location. There are also
different levels of automation for these systems, depending on the type of equipment used.
Storage and retrieval systems primarily are used to:
Store raw materials or bulk containers of goods for later use in manufacturing or
distribution operations
Temporarily store or buffer items between various manufacturing processes
Store and stage items for picking and kitting in distribution or assembly operations
Store and sequence finished goods in manufacturing facilities prior to shipping
Some of the most common type of Automated Storage and Retrieval System are as
follows:
footprint
Better utilization of vertical building
space
Automatic presentation of the next
item to pick
Reduction of worker travel distance to
retrieve or store items
Multiple access points on the same or
multiple building floors are possible
Available with refrigerated enclosures
CONVEYORS
Source: http://www.automatedconveyors.com/
Source: http://sites.dksh.com/htm/620/en/Drag-
Chain-Interflex-SLE-Steel-line.htm
Roller Roller pallet conveyor is typically
used for handling extremely heavy loads and
is ideal for accumulation zones in pack out
areas.
Source: http://www.arrcoolingtowers.com/roller-
conveyors.html
http://www.lewcoinc.com/conveyors/conveyors
i. Fixed path: Physical guidepath (e.g., wire, tape, paint) on the floor used for guidance
ii. Free-ranging: No physical guidepath, thus easier to change vehicle path (in software), but
absolute position estimates (from, e.g., lasers) are needed to correct dead-reckoning error
a. Tow AGV
- Used to pull a train of trailers
- Automated version of a tractor trailer
Trailers usually loaded manually (early type
of AGV, not much used today)
Source: http://www4.ncsu.edu/
b. Unit Load AGV
- Have decks that can be loaded
manually or automatically
- Deck can include conveyor or
lift/lower mechanism for automatic
loading
- Typically 4 by 4 feet and can carry 1
2,000 lb. loads Source: http://www4.ncsu.edu/
- Typically less than 10 vehicles in AGV
system
c. Assembly AGV
- Used as assembly platforms (e.g., car
chassis, engines, appliances)
- Greatest development activity during
the 1980s (alternative to AEMs)
- Typically 50100 vehicles in AGV
system
Source: http://www4.ncsu.edu/
3. Industrial Trucks
This term is another broad definition that can be applied to many different types of equipment.
Such pieces of equipment do have one thing in common, though they all provide
transportation. Trucks have the capability to lift via powered or manual means, and can be
ridden upon in a drivers cab, or simply power-assisted when pushed. Such tucks can also be
steered by human intervention, or can be completely automated, following a pre-defined track
on the production floor, sunken or raised tracks, or colored strips that are laid out and sensed by
optical sensors. Such automated industrial trucks also have anti-collision technology that
senses when an employee or other obstacle is near.
Pallet/Non-Pallet: Does the truck have forks for handling pallets, or does the truck have
a flat surface on which to place loads. Non-Pallet (usually) other means required to load
truck.
Manual/Powered: Does the truck have manual or powered vertical (lifting) and/or
horizontal (travel) movement capabilities. Manual => walk => operator provides the force
needed for lifting loads and/or pushing the vehicle. Powered => on-board power source
(e.g., batteries) used for lifting and/or travel.
Walk/Ride: For non-automated trucks, can the operator ride on the truck (in either a
standing or sitting position) or is the operator required to walk with the truck during
travel. Walk => manual or powered travel possible => powered travel speed limited to a
normal walking pace. Ride => powered => travel speed can be faster than a walking
pace.
Stack/No Stack: Can the truck be used to lift loads for stacking purposes. Stack => can
also be used as no stack => more expensive to add stacking capability. No Stack may lift
a load a few inches to clear the floor for subsequent travel (e.g., pallet jack), but the
loads cannot be stacked on top of each other or on shelves.
Narrow Aisle: Is the lift truck designed to have a small turning radius or does it not have
to turn at all in an aisle when loading/unloading. Narrow Aisle => greater cost and
(usually) standing operator => less aisle space required. Counterbalance and/or straddle
used for load support. Small turning radius => load support via straddle or reaching
capabilities. No turning required => even narrower aisle => only one-side loading
(sideloaders) or the capability to rotate the load (turret truck).
Automated: Is the truck automated so that it can transport loads without requiring an
operator. Non-Automated => direct labor cost of operator is by far the largest cost to
operate a non-automated truck. Semi-Automated => operator used to control
loading/unloading, but automated transport control (e.g., the S/R machine of a Man-on-
board AS/RS). Automated => Automated Guided Vehicle (AGV) => no direct labor cost,
but higher equipment costs.
Hand Truck
Source: http://www4.ncsu.edu/
Source: http://www4.ncsu.edu/
Floor Hand Truck - Four or more wheeled
hand truck with handles for pushing or
hitches for pulling. Sometimes referred to as
a "cart" or "(manual) platform truck".
Source: http://www4.ncsu.edu/
Pallet Jack - Front wheels are mounted inside the end of the forks and extend to the floor
as the pallet is only lifted enough to clear the floor for subsequent travel
Pallet restrictions: reversible pallets cannot be used, double-faced nonreversible pallets cannot
have deckboards where the front wheels extend to the floor, and enables only two-way entry
into a four-way notched-stringer pallet because the forks cannot be inserted into the notches.
Source: http://www4.ncsu.edu/
Powered Pallet Jack - Powered lifting and/or
travel
Source: http://www4.ncsu.edu/
Walkie Stacker
Source: http://www4.ncsu.edu/
Source: http://www4.ncsu.edu/
Pallet Truck
http://www4.ncsu.edu/
Source:
http://www4.ncsu.edu/
Rider Platform Truck - Operator
can ride on truck
Source: http://www4.ncsu.edu/
Source: http://www4.ncsu.edu/
Stand-Up Counterbalanced Lift Truck -
Operator stands up, giving vehicle narrow-
aisle capability; 9-11 ft. minimum aisle width
requirement;
Source: http://www4.ncsu.edu/
http://www4.ncsu.edu/
Turret Truck
- Greater stacking height compared to other narrow-aisle trucks (40 ft.
vs. 25 ft.), but greater investment cost
- Forks rotate to allow for side loading and, since truck itself does not
rotate during stacking, the body of the truck can be longer to increase its counterbalance
capability and to allow the operator to sit
- Can function like a sideloader for transporting greater-than-pallet-size load
Source: http://www4.ncsu.edu/
Operator-Up Turret Truck - Operator lifted
with the load to allow precise stacking and
picking; 5-7 ft. minimum aisle width
requirement
Source: http://www4.ncsu.edu/
Order Picker
- Similar to NA straddle truck, except operator lifted with the load to allow for less-than-
unit-load picking
- Typically has forks to allow the truck to be used for pallet
stacking and to support a pallet during less-than-pallet-load
picking
- "Belly switch" used for operator safety during picking
Order Picker
http://www4.ncsu.edu/
Sideloader
- Forks mounted perpendicular to direction of travel to allow for side loading and straddle
load support
- 5-6 ft. minimum aisle width requirement
- Can be used to handle greater-than-pallet-size loads (e.g., bar
stock)
Sideloader
http://www4.ncsu.edu/
Tractor-Trailer
- Non-load-carrying tractor used to pull a train of
trailers (i.e., dollies or floor hand trucks)
- Extends the transporting capacity of floor hand
trucks
- Typically used at airports for baggage handling
Tractor-Trailer
http://www4.ncsu.edu/
Source: http://www.ameco.eu.com/our-
products/stackers/
Source:http://www.ashoka.cc/material-handling-
equipment.html
Hoppers - Hoppers are wide, bin-like entries : https://www.rouramh.com/
that help feed bulk materials into other
machines. Generally, a hopper is open at the
top and it tapers at the bottom to assist with
feeding the machine.
Cornerboard
As its name implies, cornerboard can protect product corners by adding a strong, hard
edge to the load. It also serves to support the load, add stacking strength and improve
load stability during transit. Cornerboard, which comes in 90-degree angle strips of a
variety of materials, can be sized for the demands of the environment and task required.
Cornerboards can be a good option any time you have layers of small boxes (think of a
pallet of strawberry bins) that when stacked are not stable, says Pat Fitzgerald, new
market development manager for ITW Angleboard. At the same time, cornerboards
provide significant benefits when shipping lumber, plastics, metal, furniture, appliances
and other products that need edge protection from strapping that secures the unit or
simply from transit induced damages.
In the majority of cases, says Fitzgerald, cornerboards are hand-applied to loads;
however, there are automatic wrapping machines that apply the protective product
automatically to the load and then secure it in place with stretch film.
Greener unitizing
Over the last decade unitizing machines have evolved in performance, speed and
quality, says Wulftecs Lopes. Todays machines are more durable than they were 10
years ago. Were seeing better construction and better choices in components across
the industry.
One of the most recent enhancements is the introduction of sensors and computer logic
that optimize the machines energy usage. These new tools are able to look at the
product coming into the machine and determine whether or not theres a backlog. If
there is a backlog, the machine runs fast, if theres no backlog, it runs at a slower,
energy-efficient speed.
REFERENCES
Anon, (2017). Material Handling Systems. [online] Available at:
http://www2.isye.gatech.edu/~mgoetsch/cali/logistics_systems_design/material_handling_systems/materi
al_handling_systems.pdf [Accessed 12 Feb. 2017].
Bayt.com. (2017). What is the Types of Material Handling Equipment?. [online] Available at:
https://www.bayt.com/en/specialties/q/184810/what-is-the-types-of-material-handling-equipment/
[Accessed 12 Feb. 2017].
Galecia.com. (2017). Automated Materials Handling: More Information | The Galecia Group. [online]
Available at: http://galecia.com/content/automated-materials-handling-more-information [Accessed 12
Feb. 2017].
Isddd.com. (2017). Automated Storage and Retrieval Systems | Integrated Systems Design. [online]
Available at: http://www.isddd.com/storage-retrieval-systems [Accessed 12 Feb. 2017].
Kaseconveyors.com. (2017). Belt Conveyors | Screw Conveyors | Bucket Elevators | Bulk Material
Handling Equipment Manufacturer. [online] Available at: http://www.kaseconveyors.com/ [Accessed 12
Feb. 2017].
Lom200704.blogspot.com. (2017). Material Handling Equipment: Goals of Material Handling. [online]
Available at: http://lom200704.blogspot.com/2007/01/goals-of-material-handling.html [Accessed 12 Feb.
2017].
S.p.A., T. (2017). Bulk material handling - TENOVA. [online] Tenova.com. Available at:
http://www.tenova.com/products-technologies/mining/bulk-material-handling/ [Accessed 12 Feb. 2017].
San Jose, D., Thang, S. and Muhammad, I. (2017). Selection of Material Handling Equipment. [online]
Asilogi.blogspot.com. Available at: http://asilogi.blogspot.com/2008/01/selection-of-material-handling.html
[Accessed 12 Feb. 2017].