Académique Documents
Professionnel Documents
Culture Documents
To evaluate and implement the Project Quality Plan for painting per applicable
procedures, specifications and codes.
Understand the applications, parameters and mechanics involved in the project
paint/coating procedures.
Review and implement performance inspection procedures of all site paint/coating
activities.
To determine and evaluate atmospheric conditions pertinent to Dew Points and
paint applications.
Ensure that consumables are stored, issued and maintained per the requirements of
the quality system and/or applicable codes..
To inspect shop applied automatic coatings and field applied manual applications.
Review and comment on paint/coating subcontractors quality procedures before
they are sent to Resident QA/QC Manager for approval.
Review and comment on the paint/coating subcontractors inspection tracking
system.
Inspect and report the paint/coating subcontractors operator training/testing
programs.
Review and report on paint/coating Operator Qualification Procedures, record
maintenance, and witness related activities.
Supervise the paint/coating activities and audit/report evaluation techniques..
Coordinate paint/coating QC inspection schedule activities with other project
schedules.
Ensures subcontractor adherence to their paint/coating procedures and that those
procedures have been approved by client
Surface Profile
Instrument used: Elcometer 124 Thickness Gauge and Elcometer 122 Testex Replica Tape
Rust Grades
Dust Assessment
Weather Monitoring
Salt Test
Instrument used: Elcometer 456 Integral and Separate Digital Coating Thickness gauges,
To determine the number of tests required if the surface area is greater than 1,000 sq ft, use the
following formula to determine the minimum number of areas to test:
Holiday Testing
Adhesion Test
Part 1: Field test for soluble iron corrosion products [Technical Report]
Part 2: Laboratory determination of chloride on cleaned surfaces
Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Part 4: Guidance on the estimation of the probability of condensation prior to paint application
Part 5: Measurement of chloride on steel surfaces prepared for painting Ion detector tube method
Part 6: Sampling of soluble impurities on surfaces to be painted Bresle method
Part 7: Analysis of soluble impurities on surfaces to be painted Analysis methods for field use for oil
and grease
Part 8: Analysis of soluble impurities on surfaces to be painted Analysis methods for field use for
moisture
To find out professional solution between Sa2.5 & Sa3 - Take 5% copper sulphate solution & sprinkle on
blaster surface . If there is mill scale it will turn on dark blue because cooper sulphate is cathodic to steel.