Operational Guidance for M2S1 Scanner, the Inner-layer fingerprint reader
- How to swipe your finger -
Open your hand and place the top joint of your finger on the blue line of the sensor.
Place your fingertip
on the top of the sensor.
Place the top joint
of your finger on the blue line of sensor.
Press your finger slightly on the sensor and slide your hand at a constant speed toward your body.
Place your finger so that the finger covers
the whole surface of the sensor.
Keep your finger touching the Image
capturing sensor.
Swipe your finger at a constant speed.
- Examples of captured fingerprint images - To improve the accuracy of authentication, please enroll fingerprint data similar to what is shown in the Good example below.
The image contains a whole fingerprint
Good image with no distortion or missing data.
example
Only the fingertip was Place the top joint of your
touching the sensor while finger on the Image capturing swiping. sensor, and then swipe your finger. Ensure that your finger is The image is touching the Image capturing missing the end sensor while swiping your finger.
The finger was tilted up
while swiping. Ensure that the fingertip is touching the sensor, relax your finger and The image is missing swipe your finger again. the fingertip
The finger was not swiped Swipe your finger in a
in a straight line. straight line. Open your hand, place a finger on the sensor and The image is distorted slide your whole hand in a straight line.
The finger was not swiped
at a constant speed. Swipe your finger at a constant speed. The image is compressed