Académique Documents
Professionnel Documents
Culture Documents
Eurocode 2
Flexure
Related links
Bending and axial force
Bending moments
The table below can be used to determine bending moments and shear forces for beams,
provided the notes to the table are observed.
Table 1: Bending moment and shear coefficients for beams and one-way slabs
Moment Shear
0.45
Outer support 25% of span moment
(G+Q)
Near middle
0.090 Gl +0.100 Ql
of end span
At first
0.63
interior -0.094 (G+Q) l
(G+Q)a
support
At middle of
0.066 Gl +0.086 Ql
interior spans
At interior 0.50
-0.075 (G+Q) l
supports (G+Q)
Key
a 0.55 (G+Q) may be used adjacent to the
interior span
Notes
1 l is the span, G is the total of the ULS
permanent actions. Q is the total of the ULS
variable actions
2 Redistribution of support moments by 15%
has been included
3 Applicable to 3 or more spans only, where
Qk<Gk and where the loading is substantially
uniformly distributed.
4 Minimum span is > 0.85 longest span
5 Simpler coefficients for one-way spanning
slabs are available in the publication 'Concise
Eurocode 2'.