Vous êtes sur la page 1sur 8

NATIONAL STANDARD BMX RACE TRACK

SPECIFICATION & DESIGN GUIDELINES

www.bmxireland.ie

PERRY PARK, BIRMINGHAM - CLARK & KENT

REV 9
ABOUT BMX IRELAND
BMX Ireland is affiliated to Cycling Ireland, the National Governing Body for the sport of
Cycling on the island of Ireland and affiliated to the Union Cycliste Internationale (UCI).

Our aim is simple, promote and develop the sport of BMX Racing in Ireland.

For queries on Track Design & Development in Ireland please contact:

Eamonn Wyer (south)


+353 87 231 7927
eamonn@bmxireland.ie

or

Kevin McShane (north)


+44 7770 943711
kevin@bmxireland.ie

www.bmxireland.ie

02
WHAT IS BMX RACING
BMX started in the early 1970s when children began racing their bicycles on dirt tracks in southern
California, drawing inspiration from the motocross superstars of the time. The size and availability
of the Schwinn Sting-Ray and other wheelie bikes made them the natural bike of choice, since
they were easily customized for better handling and performance. BMX racing was a phenomenon
by the mid-1970s. Children were racing standard road bikes off-road, around purpose-built tracks in
California. The 1972 motorcycle racing documentary On Any Sunday is generally credited with
inspiring the movement nationally in the US; its opening scene shows kids riding their Sting-Rays
off-road. By the middle of that decade the sport achieved critical mass, and manufacturers began
creating bicycles designed especially for the sport.

By the early 1980's the sport spread across the Atlantic and took off in the UK, Europe and
of course Ireland. BMX racing in Ireland had a huge following during the mid to late 80's with
nationals having more than 400 riders. Hopefully well build up to those numbers again.

BMX racing today is held on specially prepared dirt tracks over jumps and around banked berms
such as the Ratoath Track in Co. Meath. Typical tracks are 350m to 400m long and races are
sprints between 8 riders that last under 50 seconds.

Since 2008 BMX racing is an Olympic Medal Event and one of the most popular additions to
the Olympic movement.

BMX Racing provides a safe and challenging sport for male and female alike. Events cater from
under 6 to over 40 years old. Its clean, exciting fun that whole families can get involved in
whether as a racer, spectator or track volunteer. BMX has something to offer everyone.

03
NATIONAL STANDARD TRACK REQUIREMENTS
The BMX track requires a space of 105m x 55m, a downhill orientation taking account of prevailing
wind is preferable. Track area does not include spectator area.

The BMX Track will consist of 4 straights of approx. 90m each (other designs possible),
360m approx. total length.

Each of the 4 straight should be raised to allow for drainage and each of the straights should be lower
than the previous one to allow for a downhill feel to the track.

Track width will be 10m wide at the start hill for an 8m wide gate, 9m wide 1st straight. 7m wide
2nd straight and 6m wide 3rd & 4th straights.

The surface will be suitable for the Irish Climate with suitable drainage. Jump sides will be shaped to
allow rain drain off the sides and not to gather or run down the faces.

Track design should be roll-able for younger riders yet challenging for experienced riders.

Electronic safety Starting Gate system.

Secure Container for club storage, ideally integrated into start hill.

Galvanised starting pens (ten), and safety rails around start hill.

Galvanised Start and Finish Line gantries.

Water supply and electrical supply available for operation and maintenance.

START HILL

FINISH

04
NATIONAL STANDARD TRACK SPECIFICATION
Basic track shape and layout will be crafted from soil.

90mm deep base layer of 3.5 down stone will be applied to the start hill, flat track sections
and the Berms, for drainage and to properly support the tarmac layer.

100mm deep layer of 1.5 down 803/804 will then be applied to the entire track, at this point
the track should be shaped to 95% of the design.

75mm Deep layer of 6mm SMA Tarmac will be applied hot as the top layer to the Start Hill and
Berms, racked level and whacked.

50mm deep layer of a Specified 0-3mm Limestone dust applied evenly on the track with a harder
wearing 100mm deep application on peaks and faces.

Topsoil layer 150mm deep and grass to be applied on sides of start hill, backside of Berms,
sides of jumps up to top level of jumps to prevent erosion.

Start hill will have a concrete pad and recess suitable for chosen start gate system.

Ducting/piles for floodlights, water pipes and drainage pipes should be placed in drainage ditches
and a clean stone backfill used, ditches should be dug after the track is built to prevent clogging.

Surrounding areas such as pens and finish line return areas paths and spectator areas etc.
should be surfaced.

START HILL

FINISH

05
NATIONAL STANDARD TRACK
Build timescale is estimated at 14 weeks, weather dependant.

Cost is estimated at approx. 100,000 - 150,000 (80,000 - 120,000 STG) dependant on site
and changes to specification.

Track Designs drawings are by Kelvin Batey Irelands World Class Elite BMX Racer with 25 years
top class World Wide BMX racing and track building experience. He has travelled all over the World
riding many top standard tracks while overseeing many track builds in the UK.

NEED A TRACK DESIGNED AND BUILT?


BMX Ireland can supply you with a list of experienced track builders
and designers in both Ireland and the UK should you require them.

Please contact us at one of the following

info@bmxireland.ie

eamonn@bmxireland.ie

kevin@bmxireland.ie

See www.bmxireland.ie/tracks for videos of track building in progress.

DONCASTER LIVERPOOL

MANCHESTER LONDON

06
www.bmxireland.ie
get involved

ULSTER

CONNACHT

LEINSTER

MUNSTER

07
NOTES:

08

Vous aimerez peut-être aussi