Académique Documents
Professionnel Documents
Culture Documents
Diodes
Zener diode
MTZJ18B
zFeatures 0.40.1
1) Glass sealed envelope. (MSD)
3.6B
2) High reliability. T-72 291 2.70.3 T-72 291
1.80.2
Rev. D 1/4
MTZJ18B
Diodes
zType NO.
TYPE TYPENO. TYPE TYPENO.
MTZJ 3.6B 3.6B MTZJ 12B 12B
MTZJ 3.9B 3.9B MTZJ 13B 13B
MTZJ 4.3B 4.3B MTZJ 15B 15B
MTZJ 4.7B 4.7B MTZJ 16B 16B
MTZJ 5.1B 5.1B MTZJ 18B 18B
MTZJ 5.6B 5.6B MTZJ 20B 20B
MTZJ 6.2B 6.2B MTZJ 22B 22B
MTZJ 6.8B 6.8B MTZJ 24B 24B
MTZJ 7.5B 7.5B MTZJ 27B 27B
MTZJ 8.2B 8.2B MTZJ 30B 30B
MTZJ 9.1B 9.1B MTZJ 33B 33B
MTZJ 10B 10B MTZJ 36B 36B
MTZJ 11B 11B MTZJ 39B 39B
Rev. D 2/4
MTZJ18B
Diodes
10
1
ZENER CURRENT:Iz(mA)
0.1
4.7 5.1
5.6 6.8
4.3
6.2
0.01
3.9 7.5
8.2 9.1 10
3.6 11 12 13 15 16 22 24
18 20 27 30 33 36 39
0.001
0 5 10 15 20 25 30 35 40
ZENER VOLTAGE:Vz(V)
Vz-Iz CHARACTERISTICS
600 10000
POWER DISSIPATION:Pd(mW)
500 PRSM
REVERSE SURGE MAXIMUM
1000 t
400
POWER:PRSM(W)
300 100
200
10
100
0 1
0 25 50 75 100 125 150 0.001 0.01 0.1 1 10 100
AMBIENT TEMPERATURE:Ta() TIME:t(ms)
Pd-TaCHARACTERISTICS PRSM-TIME CHARACTERISTICS
0.1 30 1000
Rth(j-a)
0.08
25
THAERMAL IMPEDANCE:Rth (/W)
TEMP.COEFFICIENCE:z(mV/)
TEMP.COEFFICIENCE:z(/)
0.06
20 100
Rth(j-c)
0.04
0.02 15
TRANSIENT
-0.02
5 1ms time
-0.04 1 300us
0
-0.06
-0.08 -5
0.1
0 10 20 30 40
0.001 0.01 0.1 1 10 100 1000
ZENER VOLTAGEVz(V) TIME:t(s)
z-Vz CHARACTERISTICS Rth-t CHARACTERISTICS
Rev. D 3/4
MTZJ18B
Diodes
Ta=125
Ta=25 Ta=75
Ta=-25 10000 1000
10 Ta=175
1000 f=1MHz
Ta=125
CAPACITANCE BETWEEN
ZENER CURRENT:Iz(mA)
1 100
TERMINALS:Ct(pF)
Ta=75 100
10
0.1 1
Ta=25
0.1
10
Ta=-25
0.01 0.01
Ta=175 0.001
0.001 0.0001 1
16 17 18 19 20 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 2 4 6 8 10 12 14
ZENER VOLTAGE:Vz(V)
REVERSE VOLTAGEVR(V) REVERSE VOLTAGE:VR(V)
Vz-Iz CHARACTERISTICS
VR-IR CHARACTERISTICS VR-Ct CHARACTERISTICS
17.5 1 100
Ta=25 Ta=25 90 Ta=25
0.9
IZ=5mA VR=13V f=1MHz
BETWEENTERMINALS:Ct(pF)
17.4 n=30pcs 0.8 80 VR=0V
REVERSE CURRENT:IR(nA)
n=30pcs
ZENER VOLTAGE:Vz()
70 n=10pcs
0.7
CAPACITANCE
17.3 0.6 60
0.5 50
17.2 0.4 40
0.3 AVE:0.113nA 30
17.1 0.2 20
AVE:17.33V 0.1 10 AVE:37.1pF
17 0 0
1000
DYNAMIC IMPEDANCE:Zz()
100
10
1
0.1 1 10
ZENER CURRENT(mA)
Zz-Iz CHARACTERISTICS
Rev. D 4/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
TEL : +81-75-311-2121
Copyright 2007 ROHM CO.,LTD. 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
FAX : +81-75-315-0172
Appendix1-Rev2.0