Académique Documents
Professionnel Documents
Culture Documents
kr
Special Items
15 Seam Free Wire
16 HICON/H2 Bell Type Furnace Heat treated products
22 Free-cutting Steel
23 Centerless Ground Bar
24 Stainless Steel Bar
Features and Applications of each Steel Grade
Special Items
26 Micro Alloy Steel Bar for Rack Bar
28 Quenched & Tampered Bar
Production Process, Production Capability & Features
Pohang Plant
Endless challenge to new things...
This is the trace of SeAH Special Steel which
is realizing the dream of World best business.
Products Value
Differentiation Maximization
Ethical Righteous
Management Management
CHQ WIRE
(Cold Heading Quality Wire)
PC D H D
PC D A PC D SAIP
R P A PC D A PC D SAIP
SAF
PC D A PC SAF
Check-ups
Decarburization
Spheroidized Ratio
Tensile Strength
Carbon steels
Alloy steels
Cr steel Mo steel Mn steel
Cr-Mo steel Ni-Cr-Mo steel
Boron steels
Bearing steels
Spring steels
Technical Data for Application
Material
Application Wire Drawer Process
AISI/SAE JIS
Wood Screw HD
Machine Screw (Siotted) 1008 -1010R CH8A,CH10A AIP
Wood Screw (+) 1008 -1010R CH8A,CH10A SAIP,AIP
Dimension Tolerance
SAIP /HD
Wire Diameter (mm) Diameter Tolerance (mm) Out of Roundness (mm)
Up to 5.00 + 0 / - 0.02 Below 0.01
5.01 - 10.00 + 0 / - 0.03 Below 0.015
10.01 - 16.00 + 0 / - 0.04 Below 0.02
Over 16.01 + 0 / - 0.05 Below 0.025
SAF
Wire Diameter (mm) Diameter Tolerance (mm) Out of Roundness (mm)
Under 16.00 + 0.04 / - 0.04 Below 0.04
Over 16.00 + 0.05 / - 0.05 Below 0.05
Production Process
CD BAR
(Cold Drawn Bar)
Dimensional
Inspection
Application of Cold Drawn Bar
Carbon steels Alloy steels- Cr steel Mo steel Mn steel / Cr-Mo steel Ni-Cr-Mo steel
Boron steels Bearing steels Spring steels Free cutting steels Stainless steels
Facilities and Production Capability
Equipment Quantity Size Range Capacity(Ton/year)
Schumag 0B 4 3mm - 8mm 9,000
Schumag IB-5 3 4mm - 13mm 13,000
Schumag IB-6.5 1 7mm - 14mm 7,000
CD Bar
Schumag IB-8 2 8mm - 22mm 22,000
Schumag IIB-15 1 10mm - 31mm 28,000
Schumag IIIB-20 1 20mm - 34mm 30,000
Schumag IIIB-25 1 19mm - 42mm 29,000
CG Bar Schumag Centerless Grinding M/C 7 2,000
Quenching & Tempering Line 4 20,000
SRA Line 1 3,000
After Chamfering In-Line 4 18,000
Treatment Chamfering Off-Line 2 18,000
Cutting Machine 4 4,000
4Roll Straightening M/C 1 3,000
VH 9Roll Straightening M/C 1 1,000
Dimension Tolerance
Grade
Grade6(h6) Grade7(h7) Grade8(h8) Grade9(h9) Grade10(h10) Grade11(h11)
Diameter(mm)
0 0 0 0 0 0
Up to 3.00
- 0.006 - 0.010 - 0.014 - 0.025 - 0.040 - 0.060
0 0 0 0 0 0
3.01 - 6.00
- 0.008 - 0.012 - 0.018 - 0.030 - 0.048 - 0.075
0 0 0 0 0
6.01 - 10.00 - - 0.090
- 0.015 - 0.022 - 0.036 - 0.058
0 0 0 0 0
10.01 - 18.00 - - 0.018 - 0.027 - 0.043 - 0.070 - 0.110
0 0 0 0 0
18.00 - 30.00 -
- 0.021 - 0.033 - 0.052 - 0.084 - 0.130
0 0 0 0 0
Over 30.01 -
- 0.025 - 0.039 - 0.062 - 0.100 - 0.160
Free-Cutting Steel
Free-cutting steel, with the improved properties for machine process and cutting by
adding S (sulfur), Bi (bismuth), etc., is a material for processing precision parts used in
electronic parts, automobile parts, OA & optical instruments.
SUM24L
12L14
1214Bi
S45CL
SUM22
SUM23
Machinability
Centerless Ground Bar
Roundness
Free Cutting
303F
S45CL
SUM24L
To be used for
precision machine
components.
Roughness
Stainless Steel Bar
Typical Grades
Types Chemical Comp. Characteristic Usage
304(L) 18Cr - 8Ni Most Widely Used Steel Shaft, Bolt, Nut
316(L) 18Cr - 12Ni - 2.5Mo Superior Corrosion Resistance Chemical industry
303F 18Cr - 8Ni - 3Mn - S Better Machinability Free Cutting Parts
303C 18Cr - 8Ni - S - Cu Low Magnetic Electric Shaft
410 13Cr Good Quench-hardenable Shaft, Bolt
416 13Cr - S Better Machinability Shaft
420F 13Cr - 0.3C - S Good Quench-hardenable Shaft
430F 18Cr - S Better Machinability Free Cutting Parts
Machinability
Stainless Steel
Type Chemical Composition(%) Corresponding Standards
KS C Cr Ni Mo Others UNS NO AISI DIN
(JIS) (ASTM)
202 202M 0.08 17.50 7.00 - Mn : 7.50 / 8.50 S20200 202 1.4371
0.10 18.50 8.00 N : 0.25 / 0.35
302 302 0.065 17.50 8.00 - S30200 302 1.4319
0.085 19.00 10.00 -
303 0.03 17.00 8.00 - S : 0.20 / 0.28 S30300 303 1.4305
0.06 18.00 9.00
303 303F 0.06 17.00 8.00 - S : 0.30 / 0.35 - - -
0.10 18.00 9.00
303C 0.03 17.00 9.00 - S : 0.25 / 0.30 - - -
0.06 17.50 9.50 Cu : 2.5 / 3.0
304 0.05 18.00 8.00 - S : 0.015 / 0.030 S30400 304 1.4301
0.08 18.50 8.50
304H 0.06 18.30 8.00 - S 0.010 - 304H -
0.08 18.90 8.40 N 0.050
304 304M 0.03 18.20 9.00 - S 0.010 - 304M -
0.05 18.80 9.40 N 0.050
18.00 10.00 S 0.005
AUSTENITE
Micro Alloy Steel Bar was mass-produced and applied to new cars from 1999 by developing Micro Alloy
Steel Bar for rack bar in cooperation with consumers and domestic raw material makers in 1996.
It has contributed to the competitiveness of domestic automobile technologies by localization, and it is being
applied to more new models because of its competitiveness of quality and cost.
The rack bar is a key safety part, deciding the direction of a car by transmitting a drivers steering wheel
control to the wheels so the materials for rack bar should secure quality features such as homogeneous
material properties, durability, wear-resistance, easy cutting during process, hardenability of heat treatment,
and straightening, etc.
UT ECT
Quenched & Tempered Bar
Q/T Annealing
Straightening
improving process
Improved CD Bar Cutting Threading
process
Q/T Straightening
RACK
BAR
Application Examples of SeAH Products for Automobile Main Parts
ROD
Constant Velocity Joint of Drive Shaft
Product name : SAE 1541M CD BAR
AISI 1050SH CD BAR
AISI10b38 CD BAR
Important quality control item : Surface Defects, Strength of Twist
(decarburization, S.A ratio)
DRIVE
Tie Rod of Control
SHAFT
System Gear Box
Product name :
CH45FCR CHQ Wire
Important quality control item :
Surface Defects, Hardenability
(chemical components, S.A ratio,
decarburization)
ROD
Important quality control item : Surface Defects,
Mechanical Properties,
Straightness,
Residue Stress from Drawing
Manufacturing Part Service I Other Part IT Part
SeAH Steel Corp. SeAH Holdings Corp. SeAH Networks Co., Ltd.
SeAH Tower 25~27F, 45 Yanghwa-ro, SeAH Tower 30F, 45 Yanghwa-ro, SeAH Tower 3F, 45 Yanghwa-ro,
Mapo-gu, Seoul, Korea Mapo-gu, Seoul, Korea Mapo-gu, Seoul, Korea
Tel : 82-2-6970-1000 Tel : 82-2-6970-0110 Tel : 82-2-6970-1500
Fax: 82-2-6970-1199 Fax: 82-2-6970-0127 Fax: 82-2-6970-1518
Main business : manufacturing and Main business : investment and Main business : system integration(SI),
sales of steel pipe and color steel plate management consulting networks integration(NI), multimedia
integration(MI), solution etc.
SeAH Besteel Corp. SeAH Logistics Corp.
522 Oehang-ro, Gunsan-si, Jeollabuk-do, 348 Cheolgang-ro, Nam-gu, Dreamline Co., Ltd.
Korea Pohang-si, Gyeongsangbuk-do, Korea IT Venture Tower 9F, 135 Jungdae-ro,
Tel : 82-63-460-8114 Tel : 82-54-278-8701 Songpa-gu, Seoul, Korea
Fax: 82-63-460-8560 Fax: 82-54-278-8120 Tel : 82-2-6007-6200
Main business : special steel parts, large-size Main business : inland trucking, freight Fax: 82-2-6007-6299
single product, railroad & wheels forwarder, cargo management, Main business : lease of electric
warehousing communication lines and facilities
Korea Bundy Corp.
19 Silli-gil, Jinwi-myeon, Pyeongtaek-si, SeAH E&T Corp.
Gyeonggi-do, Korea 252 Songdeok-ro 212beon-gil, Daesong-myeon,
Tel : 82-31-662-3335 Nam-gu, Pohang-si, Gyeongsangbuk-do, Korea
Fax: 82-31-662-8502 Tel : 82-54-727-2301
Main business : manufacturing and sales of Fax: 82-54-727-2303
small diameter tube, wire condenser ass y Main business : facilities engineering,
various gas tank manufacturing
ESAB SeAH Corp.
26-11 Samjeongja-ro 51beon-gil, Hai-Am Art and Scholarship Foundation
Seongsan-gu, Changwon-si, SeAH Tower 30F, 45 Yanghwa-ro, Mapo-gu,
Gyeongsangnam-do, Korea Seoul, Korea
Tel : 82-55-289-8111 Tel : 82-2-6970-0110
Fax: 82-55-289-8864 Fax: 82-2-6970-0127
Main business : manufacturing and sales of
welding materials (flux cored wire, welding rod)