Académique Documents
Professionnel Documents
Culture Documents
K-60
Corrosion protective heat-shrinkable sleeve
For more than 35 years, Canusa-CPS has
been a leading developer and
manufacturer of specialty pipeline
coatings for the sealing and corrosion
protection of pipeline joints and other
substrates. Canusa-CPS high performance
products are manufactured to the highest S
Backing US A-CP
quality standards and are available in a Black CAN
number of configurations to accommodate
many specific project applications.
g
Product Description
wBackin
The Canusa K-60 wraparound sleeve is Yello
designed for corrosion protection of buried
and exposed steel pipelines operating up Long-Term Corrosion Protection Applications
to 60C (140F). K-60 consists of a K-60 provides excellent resistance to
crosslinked polyolefin backing, coated cathodic disbondment resulting in 2LPE Pipeline Coatings
with a technologically advanced corrosion effective long term corrosion protection.
protective adhesive, which effectively Once installed, K-60 provides the struc-
bonds to steel substrates and common tural integrity of a seamless tube, and Fusion Bonded Epoxy
pipeline coatings including polyethylene provides the substrate with durable
and fusion bonded epoxy. protection against abrasion and chemical
attack. Pre-Insulated Pipes
Features & Benefits
Rapid & Reliable Installation Saves Time & Money Configurations
K-60 has a patented one-piece Wrapid K-60 can be supplied with a pre-attached
Sleeve construction that incorporates a closure or in bulk roll / cut sheet format Wrapid Sleeve
pre-attached closure strip as part of the with a separate closure. This versatility
sleeve. Because the closure has been provides contractors choice and conve-
factory applied, quick and reliable field nience depending on the type of project. CanusaWrap
installation is easy to accomplish. For For large projects, the unique construction
added flexibility, CanusaWrap two-piece of a pre-attached closure allows for
cut sleeves or bulk rolls are also available. quicker installation time versus handling, 2-Layer
K-60 is supplied with a yellow polyethylene positioning and installing separate
backing for buried pipelines or a black closures. For smaller projects or where
backing with added UV resistance for multiple pipeline diameters are present, Standard Shrink
above ground pipelines. the convenience of bulk rolls or pre-cut
sleeves with separate closures provides
for maximum flexibility and minimizes Pipe Sizes
inventory costs.
55 - 610 (2" - 24")
Temperature Range
Up to 60C (140F)
70 158
50 122
30 86
17
Volume Resistivity ASTM D257 ohm-cm 10
Dielectric Voltage Brkdwn. ASTM D149 kV/mm 20
1
How To Order :
Standard Ordering Options
K-60 230-450 YE
Dimensions & Ordering Info
sleeve
T Thickness L Thickness width
T L
Colour YE-Yellow, BK - Black S
SA-CP
300mm, 450mm, 600mm, 900mm CANU
Sleeve Width
(12", 18", 24", 36")
Pipe Size pipe
55 - 610mm (2" - 24)
size
Adhesive (min. thickness as supplied) 1.25 mm (50 mils) 1.7 mm (65 mils)
Backing (min. thickness as supplied) 0.6 mm (25 mils) 0.9 mm (36 mils) Min. Sleeve Width =
Bare Steel Dimension + 50 mm (2") min.
Product Name K-60 on each side of the pipe joint.
The above represent standard Wrapid Sleeve ordering options. Consult your Canusa representative for any unique project requirements.
For CanusaWrap bulk rolls, consult you Canusa representative. K-60 requires CLW closures.
www.canusacps.com