Académique Documents
Professionnel Documents
Culture Documents
BUILD
Assemble on the
ground or off-site
LIFT
Raise assembly
to ceiling
DONE
Level, tighten
lock nut
PAGES 3-4
PAGE 5
NEW
An innovative nut that you push into place on
threaded rod.
PAGE 7
T
he CADDY ROD LOCK family of products
PAGE 13
SN Series Nut
Innovative slotted design allows side mounting of
the nut to threaded rod. Ideal for retrot projects.
PAGE 14
2 www.erico.com
Prefabricated assemblies easily lift and lock into place, helping to save time and money
Easy push-to-install design allows installers to simply push the threaded rod through
the mounting hole, instantly holding it in position
Lock nut can be nger tightened, locking the rod in place
Works with slightly damaged threads and minor burrs on the threaded rod
Conforms with Federal Specication WW-H-171 (Type 23), Manufacturers Standardization
Society ANSI /MSS-SP-58 (Type 19 and 23)
L
W
A
FT
F F RS
IMPERIAL
Rod Size Flange Height Length Width Static Load 1 Static Load 2
Part Number Thickness A
RS H L W F1 F2
FT
Static Load 1 represents 1/8 to 3/16 (3 mm to 5 mm) ange thickness. Static Load 2 represents 1/4 to 3/8 (6 mm to 10 mm) ange thickness.
For use on plain and electro zinc plated hardware only.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/2 turn added.
METRIC
Article Rod Size Flange Height Length Width Static Static
Part Number Thickness A Load 1 Load 2 Certications
Number RS H L W
FT F1 F2
Static Load 1 represents 1/8 to 3/16 (3 mm to 5 mm) ange thickness. Static Load 2 represents 1/4 to 3/8 (6 mm to 10 mm) ange thickness.
For use on plain and electro zinc plated hardware only.
www.erico.com 3
L W
FT
F F
RS
Prefabricated assemblies easily lift and lock into place, helping to save time and money
Easy push-to-install design allows installers to simply push the threaded rod through the
mounting hole, instantly holding it in position
Lock nut can be nger tightened, locking the rod in place
Works with slightly damaged threads and minor burrs on the threaded rod
Conforms with Federal Specication WW-H-171 (Type 23), Manufacturers Standardization
Society ANSI /MSS-SP-58 (Type 19 and 23)
IMPERIAL
Part Number Rod Size Flange Thickness Height Length Width A Static Load
RS FT H L W F
METRIC
Article Rod Size Flange Height Length Width Static Load
Part Number Thickness A
Number RS H L W F
FT
4 www.erico.com
RS
C
B
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size A B C Drill Bit Size Drill Hole Depth Static Load
RS F
METRIC
Part Number Article Rod Size A B C Drill Bit Size Drill Hole Static Load Certications
Number RS Depth F
www.erico.com 5
H1
H2
RS
Eliminate overhead drilling into building structure CADDY ROD LOCK Preset Anchors are cast in place
Nails hold the anchor in place during the pour and easily break off with a strike of a hammer once the
plywood forms are removed
Easy push-to-install design allows installers to simply push the threaded rod through the mounting hole,
instantly holding it in position
Works with slightly damaged threads and minor burrs on the threaded rod
Prefabricated assemblies easily lift and lock into place, helping to save time and money
Plastic ange acts as insert locator when the forms are removed
Suitable for use in seismic zones
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size Diameter Height 1 Height 2 Static Load
RS H1 H2 F
METRIC
Part Number Article Number Rod Size Diameter Height 1 Height 2 Static Load
RS H1 H2 F
6 www.erico.com
H RS
F
W
Easy push-to-install design allows installers to simply push the threaded rod through the mounting hole,
instantly holding it in position
Fast installation onto long threaded rods push the nut in place instead of threading it up the rod
Excellent alignment and easy ne adjustment by spinning the nut
Extremely useful in tight spaces where wrenches are difcult to use
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size Height Width Static Load
RS H W F
METRIC
Part Number Article Number Rod Size Height Width Static Load
RS H W F
www.erico.com 7
W L
RS
Allows duct to be mounted tight against the ceiling to maximize overhead space and reduce the amount of threaded rod required
Multiple horizontal mounting slots accommodate insulated duct in tight spaces
Works with studs in addition to threaded rods for a more aesthetic installation
Slotted holes in bracket allow for horizontal adjustment of the bracket relative to the duct
Easy push-to-install design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
Ready to use out of the box and eliminates the need for cutting and preparing sections of strut, angle iron, or strap
Integrated adjustment nut enables ne tuning the system height up or down
Lock nut can be nger tightened, locking the rod in place
Ideal for modular assembly allows attachment of brackets to sections of duct while safely on the ground
Extremely useful in tight spaces where wrenches are difcult to use
Includes self-tapping sheet metal screws to attach bracket to duct
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size Height Length Width A Static Load
RS H L W F
METRIC
Part Number Article Rod Size Height Length Width A Static Load
Number RS H L W F
8 www.erico.com
W RS A H
Ideal for modular assembly allows attachment of brackets to sections of duct while safely on the ground
Slotted holes in bracket allow for horizontal adjustment of the bracket relative to the duct
Easy push-to-install design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in
position
Ready to use out of the box and eliminates the need for cutting and preparing sections of strut, angle iron, or strap
Integrated adjustment nut enables ne tuning the system height up or down
Lock nut can be nger tightened, locking the rod in place
Extremely useful in tight spaces where wrenches are difcult to use
Includes self-tapping sheet metal screws to attach bracket to duct
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size Height Length Width A Static Load
RS H L W F
METRIC
Part Number Article Rod Size Height Length Width A Static Load
Number RS H L W F
www.erico.com 9
RS
W H
L F
Ideal for modular assembly allows attachment of brackets to sections of duct while safely on the ground
Non-slotted bracket allows for attachment after the nal horizontal position of the duct is achieved
Easy push-to-install design allows installers to simply push the threaded rod through the mounting hole,
instantly holding it in position
Ready to use out of the box and eliminates the need for cutting and preparing sections of strut, angle iron,
or strap
Integrated adjustment nut enables ne tuning the system height up or down
Lock nut can be nger tightened, locking the rod in place
Extremely useful in tight spaces where wrenches are difcult to use
Includes self-tapping sheet metal screws to attach bracket to duct
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size Height Length Width Static Load
RS H L W F
METRIC
Part Number Article Number Rod Size Height Length Width Static Load
RS H L W F
10 www.erico.com
W L
HS1
HS2
F
RS
Easy push-to-install design allows installers to simply push the threaded rod through
the mounting hole, instantly holding it in position
Prefabricated assemblies easily lift and lock into place, helping to save time and money
Multiple attachment holes support the use of either self-drilling screws or bolts, offering
installation options for concrete, wood, and steel structures
Lock nut can be nger tightened, locking the rod in place
Integrated adjustment nut enables ne tuning the system height up or down
Extremely useful in tight spaces where wrenches are difcult to use
Conforms with Federal Specication WW-H-171 (Type 23), Manufacturers Standardization
Society ANSI /MSS-SP-58 (Type 19 and 23)
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size Height Length Width Hole Size 1 Hole Size 2 Wrench Size Static Load
RS H L W HS1 HS2 F
Follow fastener manufacturers recommended shear and pull-out strength when fastening to the structure. Fastener not included.
Install in accordance with applicable code.
METRIC
Part Number Article Rod Size Height Length Width Hole Size 1 Hole Size 2 Wrench Static Load Certications
Number RS H L W HS1 HS2 Size F
CRLLM10EG 390012 M10 62.1 mm 43.2 mm 35.6 mm 10.4 mm 7.1 mm 24 mm 3,100 N cULus,
FM, VdS
Follow fastener manufacturers recommended shear and pull-out strength when fastening to the structure. Fastener not included.
Install in accordance with applicable code.
www.erico.com 11
Easy push-to-install design allows installers to simply push the threaded rod through the
mounting hole, instantly holding it in position
Ready to use out of the box and eliminates the need for cutting sections of strut
Telescopes to the desired length and then pushes onto the threaded rod
Integrated adjustment nut enables ne tuning the system height up or down
Lock nut can be nger tightened, locking the rod in place
Allows for the quick creation, installation, and adjustment of multi-level trapeze assemblies
Supports up to four 2 (50 DN) conduits or four 2 (50 DN) water lled pipes at 10 (3 m) spacing
Works with the KBT Wire Basket Tray Clip for securing wire basket cable tray
Works with SCH Single-Piece Strut Clamps
A
B
D T
C E
HS
RS F
Material: Steel
Finish: Pre-galvanized
IMPERIAL
Part Number Rod Size Hole Size Thickness A B C D E Static Load
RS HS T F
TSR20038RL 3/8 1/4 0.04 12.6 20.0 11.40 18.75 1.4 0.81 1.12 200 lb
METRIC
Article Rod Size Hole Size Thickness A B C D E Static Load
Part Number Number RS HS T F
TSR200M8RL 360503 M8 6.4 mm 1 mm 320 508 mm 288.5 476.0 mm 35.6 mm 20.6 mm 28.4 mm 890 N
TSR200M10RL 360504 M10 6.4 mm 1 mm 320 508 mm 288.5 476.0 mm 35.6 mm 20.6 mm 28.4 mm 890 N
12 www.erico.com
Provides fast universal attachment of threaded rod and hardware to standard strut proles
Can be used to prefabricate assemblies which can be quickly pushed onto previously installed threaded rods
Works with slightly damaged threads and minor burrs on the threaded rod
B
C
RS
F D
IMPERIAL
Part Number Rod Size A B C D Static Load
RS F
METRIC
Part Number Article Rod Size A B C D Static Load
Number RS F
www.erico.com 13
RS
B F
Material: Steel
Finish: Electro-galvanized
IMPERIAL
Part Number Rod Size A B Static Load
RS F
METRIC
Part Number Article Number Rod Size A B Static Load
RS F
14 www.erico.com
WARNING
ERICO products shall be installed and used only as indicated in ERICOs product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your
ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICOs instructions and warnings may cause product malfunction,
property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, short-
ages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyers receipt of products. All other claims must be made in writing to ERICO
within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICOs prior written approval in accordance with its standard
terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall
in no event be responsible if the products have not been stored or used in accordance with its specications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYERS EXCLUSIVE REMEDY FOR ANY BREACH OF
ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICOs employees. Should ERICO be held liable its liability shall in no event
exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATE-
RIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
www.erico.com 15