Académique Documents
Professionnel Documents
Culture Documents
examples:
01A01 FRONT WHEEL ASSEMBLY -
2100,2110,2120,2150,2300,2310,3055,3100,3120,3150,3190,3300,3310,3550,4140
01A01[C] FRONT WHEEL ASSEMBLY, W/16" WHEELS - 3400, 3500, 3550, 4400,
4500, 4410, 5100, 5200, 5190, 7100, 7200
01B01 STANDARD REAR WHEELS - 2000, 4100 & 3000 EXCEPT 3550
01B01[A] STANDARD REAR WHEELS - 3500, 3550, 5000, 7000, 4000 EXCEPT 4110
Press Ctrl key, and letter F on the keyboard, at the same time. This will bring up the
search feature in Adobe Acrobat. Then simply type in the figure number you wish to
locate, and press enter.
THE DIFFERENCE BETWEEN THE OLD & NEW CASE ASSEMBLY IS A TAPPED SCREW HOLE WHICH IS NOT USED ON THE 1300
OR 1500.
1500 2 CYL COMPACT TRACTOR (1/79-12/82)
07A02 REAR TRANSMISSION CASE, 1300 & 1500
THE DIFFERENCE BETWEEN THE OLD & NEW CASE ASSEMBLY IS A TAPPED SCREW HOLE WHICH IS NOT USED ON THE 1300
OR 1500.
1500 2 CYL COMPACT TRACTOR (1/79-12/82)
07B02 TRANSMISSION GEARS, FRONT, 1300 & 1500
1500 2 CYL COMPACT TRACTOR (1/79-12/82)
07B02 TRANSMISSION GEARS, FRONT, 1300 & 1500
Screw Diameter
Inches Millimeters
3/16" 5 mm
1/4" 6 mm
5/16" 8 mm
*3/8" *10 mm
1/2" 12 mm
9/16" 14 mm
5/8" 16 mm
Screw Length
Inches Millimeters
5/8" 15 mm
3/4" 20 mm
*1 *25 mm
1-1/4" 30 mm
1-3/8" 35 mm
1-1/2" 40 mm
1-3/4" 45 mm
2" 50 mm
2-1/4" 60 mm
2-3/4" 70 mm
3" 80 mm
3-1/2" 90 mm
4" 100 mm
* EXAMPLE: For most applications a 3/8" x 1" cap screw and nut can be replaced by a
10 mm x 25 mm cap screw and nut.
For additional size information and possible substitutions, either inch to metric or
metric to inch, please refer to the full conversion table.