Académique Documents
Professionnel Documents
Culture Documents
Appendix H - WIRELINE
Appendix H
A WIRELINE Section
Schlumberger Private
Legal Information
This work contains the confidential and proprietary trade secrets of Schlumberger
and may not be copied or stored in an information retrieval system, transferred,
used, distributed, translated or retransmitted in any form or by any means,
electronic or mechanical, in whole or in part, without the express written
permission of the copyright owner.
th
Revision 5.1: May 17 , 2005 Approved By: Tom Teipner,
Schlumberger Private
th
Revision 5.1: May 17 , 2005 Approved By: Tom Teipner,
All components of the WHE system must be managed and tracked individually e.g. BOP, Tool Catcher, Grease
Head, Crossovers, Pressure Skid etc. and must be entered into the RITE system. All of the information fields on the
equipment description; pressure rating; connection types; certification status etc, shall be completed in RITE
database.
See table H-1 below for the asset naming convention, table H-2 for the WHE Toolset naming convention and table
H-3 for Auxiliary Equipment.
To avoid duplication of equipment name and serial numbers in the RITE system all items, currently in the field,
should be given a new asset serial number beginning with the location code/number followed by a three-digit
number (e.g. ADT-001, 864-001 etc.)
In the future equipment will be delivered from the suppliers with the new RITE asset code already stamped on the
equipment and recorded in the equipment quality file. For this pre-stamped equipment a serial number (taken from
the suppliers manufacturing job number) will also have been marked on the equipment. If present this serial number
should be used as the asset serial number and recorded into RITE and the fixed asset list.
Schlumberger Private
th
Revision 5.1: May 17 , 2005 Approved By: Tom Teipner,
Where W Indicates that the asset is a WHE Pressure Component (used for sorting)
TT Tool Trap
RL Riser or Lubricator
Schlumberger Private
SB Stuffing Box for HGT-D
PS Pump-in Tee Sub or Injection Tee Sub c/w lateral 2" or 3" fig 1502 entry pipe
HL HLW-B or BOP-V
SK Transport Skid
TP Test Plug
LB Lifting bail
SN Shooting nipple
th
Revision 5.1: May 17 , 2005 Approved By: Tom Teipner,
Where equipment is maintained in sets the assets can be grouped under a Tool Set name as per below:-
WHEbyyKz.z
Schlumberger Private
yy Pressure Rating (working) in Kpsi (ie 03, 05, 10 or 15)
th
Revision 5.1: May 17 , 2005 Approved By: Tom Teipner,
H. Revision History
Warning: The controlled source document of this manual section is stored under InTouch content #3046294 Any paper version of this standard is
uncontrolled and should be compared with the source document at time of use to ensure it is up to date.
Schlumberger Private
th
Revision 5.1: May 17 , 2005 Approved By: Tom Teipner,