Académique Documents
Professionnel Documents
Culture Documents
Series AD225 and AD250 This versatile on-site boring machines will
for bores up to 225/250mm diameter. help to eliminate inferior repair procedures
by precision counterboring cylinder bores
Model AD420 with the precision and speed of stationary
for bores up to 420mm diameter. machines for a perfect fit of the cylinder
liners.
Different design tool heads and boring bars The job can be done quickly to get back in
are available for boring out and facing seats operation with minimum downtime.
for installing sleeves, for machining relief An experienced operator can usually
grooves and for thru boring. mount the machine on the crankcase, align
it, and start cutting in less than 30 minutes.
Hunger AD Series
Portable Boring Machines
Features:
The heayy-duty boring spindle is driven by two motors arranged radially
opposite to provide smooth cutting action.
The speed of the spindle drive motors is infinitely adjustable so that the cutting
speed can be adapted to the diameter and material of the bore.
The feed motor for the boring spindle is electronically controlled so that the
feed rate of the boring spindle can be adjusted within a broad range.
The power supply and the controls are housed in separate cases for ease of
handling. The light-weight control unit can be located so that the operator can
conveniently operate the machine while watching the cutting process.
The control unit includes buttons for switching the spindle drive motors, for
power feed and for rapid travel of the boring spindle.
Control knobs are provided for selecting spindle speed and spindle feed rate.
Control unit A program selector switch enables the operator to set the zero position of the
cutting edge and to select automatic or manual operation.
Numeric keys are provided to enter the lenght of the bore so that the machine
will automatically bore to the exact depth.
Digital readout allows the operator to accurately monitor the position of the
cutting edge at all times.
Tools:
The tools inserted in the boring spindle can be easily changed.
Different designs of mounting arbors are available.
Boring and facing heads are available for counterboring and facing bottom of
seats on top of the crankcase for installation of thick-walled rings.
A special boring and facing head can be supplied for machining a 45 stress
relief groove at the transition of the cylindrical wall to the plane bottom of the
Boring and facing head ring seat.
A special head can be supplied for cutting a curved transition of the cylindric
wall to the bottom of the seat ring.
Standard boring tools can be fitted with precision boring units.
The precision boring units are provided with a scale for adjusting the cutting
diameter in increments of 0,01mm.