Académique Documents
Professionnel Documents
Culture Documents
1) Block the correcponding Utrancell in RNC for the RBS where RET confiugration needs to
be done.
MURNC11> lbl utrancell=UM2533
===============================================================================
=============================
Id MO administrativeState Result
===============================================================================
=============================
48408 UtranCell=UM25336 0 >>> Set.
48411 UtranCell=UM25336,Pch=1 0 >>> Set.
48439 UtranCell=UM25336,Fach=1 0 >>> Set.
48442 UtranCell=UM25336,Hsdsch=1 0 >>> Set.
48443 UtranCell=UM25336,Hsdsch=1,Eul=1 0 >>> Set.
48466 UtranCell=UM25336,Rach=1 0 >>> Set.
48467 UtranCell=UM25337 0 >>> Set.
48468 UtranCell=UM25337,Hsdsch=1 0 >>> Set.
48469 UtranCell=UM25337,Hsdsch=1,Eul=1 0 >>> Set.
48476 UtranCell=UM25337,Pch=1 0 >>> Set.
48491 UtranCell=UM25337,Rach=1 0 >>> Set.
48514 UtranCell=UM25337,Fach=1 0 >>> Set.
48515 UtranCell=UM25338 0 >>> Set.
48523 UtranCell=UM25338,Rach=1 0 >>> Set.
48538 UtranCell=UM25338,Pch=1 0 >>> Set.
48550 UtranCell=UM25338,Fach=1 0 >>> Set.
48566 UtranCell=UM25338,Hsdsch=1 0 >>> Set.
48567 UtranCell=UM25338,Hsdsch=1,Eul=1 0 >>> Set.
===============================================================================
=============================
Total: 18 MOs attempted, 18 MOs set
2) From CEX Launch NodeB element manager for NodeB to be configured.
3) Make a note of numberoftxbrances and band parameter setting for each sector and Uninit
the sectors.
4) Run the script to configure the RET from NodeB element manager:
6) Click on nextnextfinish.
7) Wait for the Script execution to be finished, the RET will be configured in NdoeB
after completion the script execution.
===============================================================================
=============================
Id MO featureStateStandardizedRet Result
===============================================================================
=============================
1524 NodeBFunction=1 1 >>> Set.
===============================================================================
=============================
Total: 1 MOs attempted, 1 MOs set
===============================================================================
=============================
Id MO featureStateRetCascading Result
===============================================================================
=============================
1524 NodeBFunction=1 1 >>> Set.
===============================================================================
=============================
Total: 1 MOs attempted, 1 MOs set
UM2533> st ret
UM2533> altk
ACKNOWLEDGED ALARMS: 1
===============================================================================
=====================================
Date & Time (Local) S Specific Problem MO (Cause/AdditionalInfo) Operator
===============================================================================
=====================================
2014-01-06 15:27:58 M TU Synch Reference Loss of Signal Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=1
(loss_of_signal) FMA_ack_server
>>> Total: 1 Alarms (0 Critical, 1 Major)
10) Load the Antenna configuration file in the RET from the NodeB. to do this select
the configured RET device from MO tree in RBS EM equipment view. In the MO
properties Action tab select action SendAntennaConfigurationFile. Input the
required parameters as shown below:
Name of file is: TBXLHA-6565C-VTM-HI.bin (for Andrew antenna only). For other
vendor antenna the fille has to be aquired form the RET vendor.
11) set the electrical tilt as per plan for all the sectors. The parmaeter
electricalAntennaTilt under MO RetDevice=1 should be set per sector.
11) The Sector are initialized in the script so no need to initialize the sector. Just
Unlock the Utrancell in RNC.
MURNC11> ldeb utrancell=UM2533
===============================================================================
=============================
Id MO administrativeState Result
===============================================================================
=============================
48408 UtranCell=UM25336 1 >>> Set.
48411 UtranCell=UM25336,Pch=1 1 >>> Set.
48439 UtranCell=UM25336,Fach=1 1 >>> Set.
48442 UtranCell=UM25336,Hsdsch=1 1 >>> Set.
48443 UtranCell=UM25336,Hsdsch=1,Eul=1 1 >>> Set.
48466 UtranCell=UM25336,Rach=1 1 >>> Set.
48467 UtranCell=UM25337 1 >>> Set.
48468 UtranCell=UM25337,Hsdsch=1 1 >>> Set.
48469 UtranCell=UM25337,Hsdsch=1,Eul=1 1 >>> Set.
48476 UtranCell=UM25337,Pch=1 1 >>> Set.
48491 UtranCell=UM25337,Rach=1 1 >>> Set.
48514 UtranCell=UM25337,Fach=1 1 >>> Set.
48515 UtranCell=UM25338 1 >>> Set.
48523 UtranCell=UM25338,Rach=1 1 >>> Set.
48538 UtranCell=UM25338,Pch=1 1 >>> Set.
48550 UtranCell=UM25338,Fach=1 1 >>> Set.
48566 UtranCell=UM25338,Hsdsch=1 1 >>> Set.
48567 UtranCell=UM25338,Hsdsch=1,Eul=1 1 >>> Set.
===============================================================================
=============================
Total: 18 MOs attempted, 18 MOs set
13) Create a CV after the RET device are enabled and functionality of RET is
checked and found OK via. Drive test.
UM2533> cvms post_RET_configuration
UM2533> confb+
===============================================================================
==================================
Proxy MO Action Nr of Params
===============================================================================
==================================
380 ConfigurationVersion=1 create 5
===============================================================================
==================================
Total: 1 MOs attempted, 1 MOs actioned
UM2533> if $nr_of_mos_ok = 1
Enter commands (one per line), then type "fi"
> acc configurationversion=1 setstartable
> post_RET_configuration
> fi
===============================================================================
==================================
Proxy MO Action Nr of Params
===============================================================================
==================================
380 ConfigurationVersion=1 setStartable 1
===============================================================================
==================================
Total: 1 MOs attempted, 1 MOs actioned
UM2533> confb-
UM2533> q