Académique Documents
Professionnel Documents
Culture Documents
Important:
Protect the hard disk drives from static electricity. Important:
Do not stack them, or keep them upright. Do not disconnect the connector while the HDD status
Do not use an electric screwdriver to secure them. indicators are still lit or until 30 seconds have passed
(Tightening torque: 0.49 Nm {5 kgfcm}) since the HDD status indicators went off.
Avoid rapid changes in the temperature and humidity to Do not pull the cable.
prevent condensation. (Acceptable change: within Hold the connector and pull it straight up.
15 C/h {59 F/h})
3. Disconnect the connectors from the hard disk drives.
1. Open the connectors cover on the front panel and
remove the fixing screw.
Detach the front panel by sliding it after removing the
screw.
AL
AR
M
SU ALAR
SP M
EN
DE
D
ER
OP RO
ER R
AT TIM
E ER
RE
C
LIN
K1 HD
D
LIN 1
K2
HD
D
2
HD
D
3
HD
D
4
ES
C
SE
T
4. Remove both of the hard disk drive units.
Ne
twork
Dis
c
WJ Reco
-ND
300rde
r
Connector's covor