Académique Documents
Professionnel Documents
Culture Documents
H-2000-2029-06-A
The HPRA is fitted with the System components Arm with probe
The arm is available with a 90
three-axis RP3 probe. Base with cover bend in a range of sizes to suit
The base assembly is a most machine tools.
The patented base assembly design
permanent fixture on the
ensures highly repeatable stylus Renishaw has recommended
machine and provides the
positioning each time the HPRA is loaded arm configurations for all
repeatable location for the
onto the machine. standard chuck sizes. Where
arm and probe assembly. The
A quick-release lever allows the HPRA to cover provides protection for these are not suitable, arms
be removed from the machines working the location mechanism during can be configured by Renishaw
envelope during metal cutting operations, and machining operations. The to suit a particular requirement. *
stored on a stand assembly which may be cable between the base and the TSI2 interface
conveniently located on top of the machine. A interface (TSI2) is terminated The interface processes
bi-colour LED indicates the probes status and with connectors, enabling signals between the probe
also informs the operator that the system is machine wiring and mechanical and machines control and
ready for use. fitting to take place separately if allows simple integration.
required. The unit is DIN rail-mounted
! CAUTION: HPRA is designed
specifically for use with the TSI2
Additional output signals are and features an Easy fit
provided to indicate system location mechanism. There
Interface. Do not use the HPRA with
any other interface. ready for probing and system are two connectors for simple
ready for machining. connection to the base (3-way)
Contact the Styli and Custom Products
Stand assembly and machines control (25-way
Division for information on other arms
A separate stand assembly is D type).
options.
provided for safe storage of the
HPRA when it is not in use.
Data sheet
HPRA high precision removable arm
Stylus
Stand
TSI2
interface
RP3
Base
HPRA
Benefits
Complete system from Renishaw. Stylus break stem protects the probe if stylus overtravel
limits are exceeded.
Tool setting times up to 90 % faster.
Stylus configurations to suit 16 mm, 20 mm, 25 mm,
Recommended OEM arm configurations for all standard
32 mm, 40 mm and 50 mm tooling.
chuck sizes.
Modular system allows fitting to a wide range of machines.
Positional repeatability typically 5 m (0.0002 in) 2
Simple retro-fit to existing machines.
Renishaws rugged design ensures fault-free operation in
the harshest of machine tool environments. For Y axis application a cranked stylus is
LED indicator to show probe status and arm READY FOR
! recommended. Contact the Styli and Custom
USE. Products Division for further information.
System specification
Application CNC lathe tool setting Environmental protection IPX8
Drilling details
PCD 72 (2.835)
120
120
M6
30 (3 off)
(1.181)
16 (0.984)
Lathe X axis
30 13 (0.512)
(1.181)
85 (3.346)
Mounting
Rear exit version Side exit version
M6 (3 off) M6 (3 off)
10 Nm 10 Nm
Drilling details
120
120
M6 (3 off)
72
(2.835)
120
28
(1.102)
10 (0.394)
90 (3.543)
Data sheet
HPRA high precision removable arm
TSI2 interface
35 mm M4 (x2)
(1.38 in)
4 mm
(0.16 in)
130 mm
(5.12 in)
1 2 3 4 5 6 7 13
Vss X-0 X+0 Z-0 Z+0 ARO MRO GND
Arm Machine
18 - 30 X- X+ Z- Z+ GND
ready ready
V dc output output output output 0V
output output
PL1 14 15 16 17 24 25 Shell
18 V to 30 V dc SelX- SelX+ SelZ- SelZ+ INH GND SCR
BS EN61010 Select Select Select Select Inhibit
0V Screen*
X-input X+input Z-input Z+input input
24 V
PSU Shell to be connected to machine star point.
0V 25 way D type
socket
(not supplied)
Max. cable
PL2 length: 3 m Vss = 18 V - 30 V dc
Renishaw = P-FS02-1A25
1 2 3 HPRA
Belling Lee = L1427B
P+ SCR P-
Probe+ Screen Probe-
Brown Blue + White
screen
MRO +24V
0V
+24V
LED
ARO 0V
+24V LED Red
PO LED
Green Green
0V
Inputs Vss
Vss
NOTE: The probe status
LED will still function
when inhibit is active. TSI 2
INH
(PL1-24) XO H
L
INH
(PL1-14) SelX- TSI2 +24 (Vss) Internally
SelX-
(PL1-15) SelX+ X-O pulled down
(PL1-16) SelZ- SelZ-
X+O (2K4) ACTIVE
(PL1-17) SelZ+ Z-O SelZ+
HIGH inputs
Z+O SelX-
0 V (GND)
A A
B B
Y
The stylus
can be in any
X orientation
Z
Please contact the Styli and Custom Products Division for further information regarding Y axis machine applications.
4.5 (0.18) 2.7 (0.11)
9.5 (0.37)
Data sheet
mm (in)
mm (in)
mm (in)
60
(2.36)
25 (1.00)
50
(1.97)
4.2 (0.16)
4.2 (0.16)
4.2 (0.16)
40mm
25 mm
16 mm
HPRA high precision removable arm
30
(0.35)
30
30
4.4 (0.17)
3.1 (0.12)
34 (1.34)
Stylus dimensions by tool size
mm (in)
mm (in)
mm (in)
60
(2.36)
60
(2.36)
32
(1.26)
4.2 (0.16)
4.2 (0.16)
50 mm
32 mm
20 mm
4.2 (0.16)
30
7 4
(0.27) (0.16)
4.4 (0.17)
30
30
24
39 (1.53) (0.94)
54.4 (2.14)
S = 56 (2.2) S = 41 (1.6)
S = 71 (2.8)
(2.736)
32 mm 56 (2.20)
(1.122)
69.5
28.5
16 mm 36 (1.42)
20 mm 280 241 41 (1.61)
8 in
25 mm (11.02) (9.49) 51 (2.01)
32 mm 56 (2.20)
16 mm 36 (1.42)
20 mm 41 (1.61)
325 290
10 in 25 mm 51 (2.01) A
(12.79) (11.42)
32 mm 56 (2.20)
40 mm 61 (2.40) 30 minimum
16 mm 36 (1.42)
(suggested)
(1.850)
47.0
20 mm 41 (1.61)
25 mm 355 290 51 (2.01) 7 4) (1.181)
12 in
32 mm (13.98) (11.42) 56 (2.20) R5 .24
(2 16.3
40 mm 61 (2.40)
50 mm 71 (2.80) (0.642)
20 mm 41 (1.61)
25 mm 51 (2.01)
455 335
15 in 32 mm 56 (2.20) 38.1
(17.91) (13.19)
40 mm 61 (2.40)
50 mm 71 (2.80) (1.50)
25 mm 51 (2.01)
32 mm 510 375 56 (2.20)
18 in
40 mm (20.08) (14.76) 61 (2.40)
50 mm 71 (2.80)
(3.268)
25 mm 51 (2.01) S
83
(3.345)
24 in
40 mm (22.83) (17.72) 61 (2.40)
50 mm 71 (2.80)
Lathe X axis
HPRA is available with rear (RE) or side exit (SE) bases
HPRA kit selection list
16 mm 20 mm 25 mm 32 mm 40 mm 50 mm A mm (in) B mm (in)
RE SE RE SE RE SE RE SE RE SE RE SE
6 in 0736 0784 0661 0781 0662 0782 0663 0783 250 (9.84) 211 (8.31)
8 in 0739 0790 0664 0787 0665 0788 0666 0789 280 (11.02) 241 (9.49)
10 in 0742 0796 0667 0793 0668 0794 0669 0795 0743 0797 325 (12.79) 290 (11.42)
12 in 0745 0802 0670 0799 0671 0800 0672 0801 0746 0803 0747 0804 355 (13.98) 290 (11.42)
15 in 0673 0805 0674 0806 0675 0807 0749 0809 0750 0810 455 (17.91) 355 (13.19)
18 in 0841 0857 0842 0858 0843 0859 0844 0860 510 (20.08) 375 (14.76)
24 in 0845 0861 0846 0862 0847 0863 0848 0864 580 (22.83) 450 (17.72)
S mm (in) 36 (1.42) 41 (1.61) 51 (2.01) 56 (2.20) 61 (2.40) 71 (2.80)
HPRA kit part no. = A-2176-XXXX (XXXX from above)
Renishaw plc T +44 (0)1453 524524
New Mills, Wotton-under-Edge, F +44 (0)1453 524901
Gloucestershire GL12 8JR E uk@renishaw.com
United Kingdom www.renishaw.com
16 mm 20 mm 25 mm 32 mm 40 mm 50 mm
6 in 0826 0676 0677 0678
8 in 0829 0679 0680 0681
10 in 0832 0682 0683 0684 0833
12 in 0685 0686 0687 0836 0837
15 in 0688 0689 0690 0839 0870
18 in 0899 0850 0851 0852
24 in 0853 0854 0853 0856
Part number = A-2176-XXXX (XXXX from above)
Base/TSI2 kit A-2176-0696 Rear exit base assembly, TSI2 kit Fixing kit A-2176-0028 HPRA base fixing kit
TSI2 interface A-2176-0010 TSI2 tool setting arm interface Stylus kit A-2197-0157 Stylus kit for 16 mm tooling
Fuse P-FS01-1A25 250 mA quick-blow fuse for TSI2 Stylus kit A-2197-0158 Stylus kit for 20 mm tooling
Associated RP3 Data sheet RP3 Users guide HPRA Users guide Machine tool styli brochure
publications H-2000-2014 H-2000-5187 H-2000-5124 H-1000-3200
H-2000-2029-06-A
main website at www.renishaw.com/contact
Renishaw plc 1999-2004 Renishaw reserves the right to change specifications without notice Issued 0304 Part no. H-2000-2029-06-A